etc/tempest.conf.sample

[DEFAULT]
#log_config = /opt/stack/tempest/etc/logging.conf.sample

# disable logging to the stderr
use_stderr = false

# log file
log_file = tempest.log

# lock/semaphore base directory
lock_path=/tmp

default_log_levels=tempest.stress=INFO,amqplib=WARN,sqlalchemy=WARN,boto=WARN,suds=INFO,keystone=INFO,eventlet.wsgi.server=WARN

[identity]
# This section contains configuration options that a variety of Tempest
# test clients use when authenticating with different user/tenant
# combinations

# The type of endpoint for a Identity service. Unless you have a
# custom Keystone service catalog implementation, you probably want to leave
# this value as "identity"
catalog_type = identity
# Ignore SSL certificate validation failures? Use when in testing
# environments that have self-signed SSL certs.
disable_ssl_certificate_validation = false
# URL for where to find the OpenStack Identity API endpoint (Keystone)
uri = http://127.0.0.1:5000/v2.0/
# URL for where to find the OpenStack V3 Identity API endpoint (Keystone)
uri_v3 = http://127.0.0.1:5000/v3/
# The identity region. Also used as the other services' region name unless
# they are set explicitly.
region = RegionOne

# This should be the username of a user WITHOUT administrative privileges
username = demo
# The above non-administrative user's password
password = secret
# The above non-administrative user's tenant name
tenant_name = demo

# This should be the username of an alternate user WITHOUT
# administrative privileges
alt_username = alt_demo
# The above non-administrative user's password
alt_password = secret
# The above non-administrative user's tenant name
alt_tenant_name = alt_demo

# This should be the username of a user WITH administrative privileges
admin_username = admin
# The above administrative user's password
admin_password = secret
# The above administrative user's tenant name
admin_tenant_name = admin

# The role that is required to administrate keystone.
admin_role = admin

[compute]
# This section contains configuration options used when executing tests
# against the OpenStack Compute API.

# Allows test cases to create/destroy tenants and users. This option
# enables isolated test cases and better parallel execution,
# but also requires that OpenStack Identity API admin credentials
# are known.
allow_tenant_isolation = true

# Allows test cases to create/destroy tenants and users. This option
# enables isolated test cases and better parallel execution,
# but also requires that OpenStack Identity API admin credentials
# are known.
allow_tenant_reuse = true

# Reference data for tests. The ref and ref_alt should be
# distinct images/flavors.
image_ref = {$IMAGE_ID}
image_ref_alt = {$IMAGE_ID_ALT}
flavor_ref = 1
flavor_ref_alt = 2

# User name used to authenticate to an instance
image_ssh_user = root

# Password used to authenticate to an instance
image_ssh_password = password

# User name used to authenticate to an instance using the alternate image
image_alt_ssh_user = root

# Password used to authenticate to an instance using the alternate image
image_alt_ssh_password = password

# Number of seconds to wait while looping to check the status of an
# instance that is building.
build_interval = 10

# Number of seconds to time out on waiting for an instance
# to build or reach an expected status
build_timeout = 600

# Run additional tests that use SSH for instance validation?
# This requires the instances be routable from the host
#  executing the tests
run_ssh = false

# Name of a user used to authenticate to an instance.
ssh_user = cirros

# Visible fixed network name
fixed_network_name = private

# Network id used for SSH (public, private, etc)
network_for_ssh = public

# IP version of the address used for SSH
ip_version_for_ssh = 4

# Number of seconds to wait to ping to an instance
ping_timeout = 60

# Number of seconds to wait to authenticate to an instance
ssh_timeout = 300

# Additinal wait time for clean state, when there is
# no OS-EXT-STS extension availiable
ready_wait = 0

# Number of seconds to wait for output from ssh channel
ssh_channel_timeout = 60

# Dose the SSH uses Floating IP?
use_floatingip_for_ssh = true

# The type of endpoint for a Compute API service. Unless you have a
# custom Keystone service catalog implementation, you probably want to leave
# this value as "compute"
catalog_type = compute

# The name of a region for compute. If empty or commented-out, the value of
# identity.region is used instead. If no such region is found in the service
# catalog, the first found one is used.
#region = RegionOne

# Expected first device name when a volume is attached to an instance
volume_device_name = vdb

[compute-feature-enabled]
# Does the Compute API support creation of images?
create_image = true

# For resize to work with libvirt/kvm, one of the following must be true:
# Single node: allow_resize_to_same_host=true must be set in nova.conf
# Cluster: the 'nova' user must have scp access between cluster nodes
resize = true

# Does the compute API support changing the admin password?
change_password = false

# Run live migration tests (requires 2 hosts)
live_migration = false

# Use block live migration (Otherwise, non-block migration will be
# performed, which requires XenServer pools in case of using XS)
block_migration_for_live_migration = false

# Supports iSCSI block migration - depends on a XAPI supporting
# relax-xsm-sr-check
block_migrate_cinder_iscsi = false

# When set to false, disk config tests are forced to skip
disk_config = true

# When set to false, flavor extra data tests are forced to skip
flavor_extra = true

[compute-admin]
# This should be the username of a user WITH administrative privileges
# If not defined the admin user from the identity section will be used
username =
# The above administrative user's password
password =
# The above administrative user's tenant name
tenant_name =

[image]
# This section contains configuration options used when executing tests
# against the OpenStack Images API

# The type of endpoint for an Image API service. Unless you have a
# custom Keystone service catalog implementation, you probably want to leave
# this value as "image"
catalog_type = image

# The name of a region for image. If empty or commented-out, the value of
# identity.region is used instead. If no such region is found in the service
# catalog, the first found one is used.
#region = RegionOne

# HTTP image to use for glance http image testing
http_image = http://download.cirros-cloud.net/0.3.1/cirros-0.3.1-x86_64-uec.tar.gz

[image-feature-enabled]
# Is the image api_v1 enabled
api_v1 = True
# Is the image api_v2 enabled
api_v2 = True

[network]
# This section contains configuration options used when executing tests
# against the OpenStack Network API.

# Version of the Neutron API
api_version = v1.1
# Catalog type of the Neutron Service
catalog_type = network

# The name of a region for network. If empty or commented-out, the value of
# identity.region is used instead. If no such region is found in the service
# catalog, the first found one is used.
#region = RegionOne

# A large private cidr block from which to allocate smaller blocks for
# tenant networks.
tenant_network_cidr = 10.100.0.0/16

# The mask bits used to partition the tenant block.
tenant_network_mask_bits = 24

# If tenant networks are reachable, connectivity checks will be
# performed directly against addresses on those networks.
tenant_networks_reachable = false

# Id of the public network that provides external connectivity.
public_network_id = {$PUBLIC_NETWORK_ID}

# Id of a shared public router that provides external connectivity.
# A shared public router would commonly be used where IP namespaces
# were disabled.  If namespaces are enabled, it would be preferable
# for each tenant to have their own router.
public_router_id = {$PUBLIC_ROUTER_ID}


[volume]
# This section contains the configuration options used when executing tests
# against the OpenStack Block Storage API service

# The type of endpoint for a Cinder or Block Storage API service.
# Unless you have a custom Keystone service catalog implementation, you
# probably want to leave this value as "volume"
catalog_type = volume
# The name of a region for volume. If empty or commented-out, the value of
# identity.region is used instead. If no such region is found in the service
# catalog, the first found one is used.
#region = RegionOne
# The disk format to use when copying a volume to image
disk_format = raw
# Number of seconds to wait while looping to check the status of a
# volume that is being made available
build_interval = 10
# Number of seconds to time out on waiting for a volume
# to be available or reach an expected status
build_timeout = 300
# If multi_backend is enabled there must be 2 volume_backend_names (
# backend1_name and backend2_name) which have to be different)
backend1_name = BACKEND_1
backend2_name = BACKEND_2
# Protocol and vendor of volume backend to target when testing volume-types.
# You should update to reflect those exported by configured backend driver.
storage_protocol = iSCSI
vendor_name = Open Source

[volume-feature-enabled]
#Runs Cinder multi-backend tests (requires 2 backends declared in cinder.conf)
multi_backend = false

[object-storage]
# This section contains configuration options used when executing tests
# against the OpenStack Object Storage API.

# You can configure the credentials in the compute section

# The type of endpoint for an Object Storage API service. Unless you have a
# custom Keystone service catalog implementation, you probably want to leave
# this value as "object-store"
catalog_type = object-store

# The name of a region for object storage. If empty or commented-out, the
# value of identity.region is used instead. If no such region is found in
# the service catalog, the first found one is used.
#region = RegionOne

# Number of seconds to time on waiting for a container to container
# synchronization complete
container_sync_timeout = 120
# Number of seconds to wait while looping to check the status of a
# container to container synchronization
container_sync_interval = 5

# Set operator role for tests that require creating a container
operator_role = Member

[object-feature-enabled]
# Set to True if the Account Quota middleware is enabled
accounts_quotas = True
# Set to True if the Container Quota middleware is enabled
container_quotas = True

[boto]
# This section contains configuration options used when executing tests
# with boto.

# EC2 URL
ec2_url = http://localhost:8773/services/Cloud
# S3 URL
s3_url = http://localhost:3333

# Use keystone ec2-* command to get those values for your test user and tenant
aws_access =
aws_secret =

# Image materials for S3 upload
# ALL content of the specified directory will be uploaded to S3
s3_materials_path = /opt/stack/devstack/files/images/s3-materials/cirros-0.3.1

# The manifest.xml files, must be in the s3_materials_path directory
# Subdirectories not allowed!
# The filenames will be used as a Keys in the S3 Buckets

# ARI Ramdisk manifest. Must be in the above s3_materials_path
ari_manifest = cirros-0.3.1-x86_64-initrd.manifest.xml

# AMI Machine Image manifest. Must be in the above s3_materials_path
ami_manifest = cirros-0.3.1-x86_64-blank.img.manifest.xml

# AKI Kernel Image manifest, Must be in the above s3_materials_path
aki_manifest = cirros-0.3.1-x86_64-vmlinuz.manifest.xml

# Instance type
instance_type = m1.tiny

# TCP/IP connection timeout
http_socket_timeout = 5

# Number of retries actions on connection or 5xx error
num_retries = 1

# Status change wait timout
build_timeout = 120

# Status change wait interval
build_interval = 1

[orchestration]
# The type of endpoint for an Orchestration API service. Unless you have a
# custom Keystone service catalog implementation, you probably want to leave
# this value as "orchestration"
catalog_type = orchestration

# The name of a region for orchestration. If empty or commented-out, the value
# of identity.region is used instead. If no such region is found in the service
# catalog, the first found one is used.
#region = RegionOne

# Status change wait interval
build_interval = 1

# Status change wait timout. This may vary across environments as some some
# tests spawn full VMs, which could be slow if the test is already in a VM.
build_timeout = 300

# Instance type for tests. Needs to be big enough for a
# full OS plus the test workload
instance_type = m1.micro

# Name of heat-cfntools enabled image to use when launching test instances
# If not specified, tests that spawn instances will not run
#image_ref = ubuntu-vm-heat-cfntools

# Name of existing keypair to launch servers with. The default is not to specify
# any key, which will generate a keypair for each test class
#keypair_name = heat_key

[dashboard]
# URL where to find the dashboard home page
dashboard_url = 'http://localhost/'

# URL where to submit the login form
login_url = 'http://localhost/auth/login/'

[scenario]
# Directory containing image files
img_dir = /opt/stack/new/devstack/files/images/cirros-0.3.1-x86_64-uec

# AMI image file name
ami_img_file = cirros-0.3.1-x86_64-blank.img

# ARI image file name
ari_img_file = cirros-0.3.1-x86_64-initrd

# AKI image file name
aki_img_file = cirros-0.3.1-x86_64-vmlinuz

# ssh username for the image file
ssh_user = cirros

# specifies how many resources to request at once. Used for large operations
# testing."
large_ops_number = 0

[cli]
# Enable cli tests
enabled = true
# directory where python client binaries are located
cli_dir = /usr/local/bin
# Number of seconds to wait on a CLI timeout
timeout = 15

[service_available]
# Whether or not cinder is expected to be available
cinder = true
# Whether or not neutron is expected to be available
neutron = false
# Whether or not glance is expected to be available
glance = true
# Whether or not swift is expected to be available
swift = true
# Whether or not nova is expected to be available
nova = true
# Whether or not Heat is expected to be available
heat = false
# Whether or not Ceilometer is expected to be available
ceilometer = True
# Whether or not horizon is expected to be available
horizon = true

[stress]
# Maximum number of instances to create during test
max_instances = 32
# Time (in seconds) between log file error checks
log_check_interval = 60
# The default number of threads created while stress test
default_thread_number_per_action = 4

[debug]
# Enable diagnostic commands
enable = true