| # Autogenerated configuration file template |
| ################################# |
| # allow-axfr-ips If enabled, restrict zonetransfers to originate from these |
| # IP addresses |
| # |
| # allow-axfr-ips= |
| |
| ################################# |
| # allow-recursion List of netmasks that are allowed to recurse |
| # |
| allow-recursion=127.0.0.1 |
| |
| ################################# |
| # allow-recursion-override Local data even about hosts that don't exist will |
| # override the internet. (on/off) |
| # |
| # allow-recursion-override= |
| |
| ################################# |
| # cache-ttl Seconds to store packets in the PacketCache |
| # |
| # cache-ttl=20 |
| |
| ################################# |
| # chroot If set, chroot to this directory for more security |
| # |
| # chroot=/var/spool/powerdns |
| |
| ################################# |
| # config-dir Location of configuration directory (pdns.conf) |
| # |
| config-dir=/etc/powerdns |
| |
| ################################# |
| # config-name Name of this virtual configuration - will rename the binary image |
| # |
| # config-name= |
| |
| ################################# |
| # control-console Debugging switch - don't use |
| # |
| # control-console=no |
| |
| ################################# |
| # daemon Operate as a daemon |
| # |
| daemon=yes |
| |
| ################################# |
| # default-soa-name name to insert in the SOA record if none set in the backend |
| # |
| default-soa-name=a.very.best.power.dns.server |
| |
| ################################# |
| # disable-axfr Disable zonetransfers but do allow TCP queries |
| # |
| disable-axfr=yes |
| |
| ################################# |
| # disable-tcp Do not listen to TCP queries |
| # |
| # disable-tcp=no |
| |
| ################################# |
| # distributor-threads Default number of Distributor (backend) threads to start |
| # |
| # distributor-threads=3 |
| |
| ################################# |
| # fancy-records Process URL and MBOXFW records |
| # |
| # fancy-records=no |
| |
| ################################# |
| # guardian Run within a guardian process |
| # |
| guardian=yes |
| |
| ################################# |
| # launch Which backends to launch and order to query them in |
| # |
| launch=gmysql |
| |
| ################################# |
| # load-modules Load this module - supply absolute or relative path |
| # |
| # load-modules= |
| |
| ################################# |
| # local-address Local IP address to which we bind |
| # |
| local-address=0.0.0.0 |
| |
| ################################# |
| # local-ipv6 Local IP address to which we bind |
| # |
| # local-ipv6= |
| |
| ################################# |
| # local-port The port on which we listen |
| # |
| local-port=53 |
| |
| ################################# |
| # log-dns-details If PDNS should log failed update requests |
| # |
| # log-dns-details= |
| |
| ################################# |
| # log-failed-updates If PDNS should log failed update requests |
| # |
| # log-failed-updates= |
| |
| ################################# |
| # logfile Logfile to use |
| # |
| # logfile=/var/log/pdns.log |
| |
| ################################# |
| # logging-facility Log under a specific facility |
| # |
| # logging-facility= |
| |
| ################################# |
| # loglevel Amount of logging. Higher is more. Do not set below 3 |
| # |
| # loglevel=4 |
| |
| ################################# |
| # master Act as a master |
| # |
| # master=yes |
| |
| ################################# |
| # max-queue-length Maximum queuelength before considering situation lost |
| # |
| # max-queue-length=5000 |
| |
| ################################# |
| # max-tcp-connections Maximum number of TCP connections |
| # |
| # max-tcp-connections=10 |
| |
| ################################# |
| # module-dir Default directory for modules |
| # |
| module-dir=/usr/lib/powerdns |
| |
| ################################# |
| # negquery-cache-ttl Seconds to store packets in the PacketCache |
| # |
| # negquery-cache-ttl=60 |
| |
| ################################# |
| # out-of-zone-additional-processing Do out of zone additional processing |
| # |
| # out-of-zone-additional-processing=no |
| |
| ################################# |
| # query-cache-ttl Seconds to store packets in the PacketCache |
| # |
| # query-cache-ttl=20 |
| |
| ################################# |
| # query-logging Hint backends that queries should be logged |
| # |
| # query-logging=no |
| |
| ################################# |
| # queue-limit Maximum number of milliseconds to queue a query |
| # |
| # queue-limit=1500 |
| |
| ################################# |
| # query-local-address The IP address to use as a source address for sending |
| # queries. |
| # query-local-address= |
| |
| ################################# |
| # receiver-threads Number of receiver threads to launch |
| # |
| # receiver-threads=1 |
| |
| ################################# |
| # recursive-cache-ttl Seconds to store packets in the PacketCache |
| # |
| # recursive-cache-ttl=10 |
| |
| ################################# |
| # recursor If recursion is desired, IP address of a recursing nameserver |
| # |
| # recursor= |
| |
| ################################# |
| # setgid If set, change group id to this gid for more security |
| # |
| setgid=pdns |
| |
| ################################# |
| # setuid If set, change user id to this uid for more security |
| # |
| setuid=pdns |
| |
| ################################# |
| # skip-cname Do not perform CNAME indirection for each query |
| # |
| # skip-cname=no |
| |
| ################################# |
| # slave Act as a slave |
| # |
| # slave=no |
| |
| ################################# |
| # slave-cycle-interval Reschedule failed SOA serial checks once every .. seconds |
| # |
| # slave-cycle-interval=60 |
| |
| ################################# |
| # smtpredirector Our smtpredir MX host |
| # |
| # smtpredirector=a.misconfigured.powerdns.smtp.server |
| |
| ################################# |
| # soa-minimum-ttl Default SOA mininum ttl |
| # |
| # soa-minimum-ttl=3600 |
| |
| ################################# |
| # soa-refresh-default Default SOA refresh |
| # |
| # soa-refresh-default=10800 |
| |
| ################################# |
| # soa-retry-default Default SOA retry |
| # |
| # soa-retry-default=3600 |
| |
| ################################# |
| # soa-expire-default Default SOA expire |
| # |
| # soa-expire-default=604800 |
| |
| ################################# |
| # soa-serial-offset Make sure that no SOA serial is less than this number |
| # |
| # soa-serial-offset=0 |
| |
| ################################# |
| # socket-dir Where the controlsocket will live |
| # |
| socket-dir=/var/run |
| |
| ################################# |
| # strict-rfc-axfrs Perform strictly rfc compliant axfrs (very slow) |
| # |
| # strict-rfc-axfrs=no |
| |
| ################################# |
| # urlredirector Where we send hosts to that need to be url redirected |
| # |
| # urlredirector=127.0.0.1 |
| |
| ################################# |
| # use-logfile Use a log file |
| # |
| # use-logfile=yes |
| |
| ################################# |
| # webserver Start a webserver for monitoring |
| # |
| webserver=yes |
| |
| ################################# |
| # webserver-address IP Address of webserver to listen on |
| # |
| webserver-address=127.0.0.1 |
| |
| ################################# |
| # webserver-password Password required for accessing the webserver |
| # |
| webserver-password=i.cannot.be.bad |
| |
| ################################# |
| # webserver-port Port of webserver to listen on |
| # |
| webserver-port=8081 |
| |
| ################################# |
| # webserver-print-arguments If the webserver should print arguments |
| # |
| # webserver-print-arguments=no |
| |
| ################################# |
| # wildcard-url Process URL and MBOXFW records |
| # |
| # wildcard-url=no |
| |
| ################################# |
| # wildcards Honor wildcards in the database |
| # |
| # wildcards= |
| |
| ################################# |
| # version-string What should PowerDNS return for version |
| # allowed methods are anonymous / powerdns / full / custom |
| version-string=powerdns |
| |
| include-dir=/etc/powerdns/pdns.d |