| [identity] |
| # This section contains configuration options that a variety of Tempest |
| # test clients use when authenticating with different user/tenant |
| # combinations |
| |
| # Set to True if your test environment's Keystone authentication service should |
| # be accessed over HTTPS |
| use_ssl = %IDENTITY_USE_SSL% |
| # This is the main host address of the authentication service API |
| host = %IDENTITY_HOST% |
| # Port that the authentication service API is running on |
| port = %IDENTITY_PORT% |
| # Version of the authentication service API (a string) |
| api_version = %IDENTITY_API_VERSION% |
| # Path to the authentication service tokens resource (do not modify unless you |
| # have a custom authentication API and are not using Keystone) |
| path = %IDENTITY_PATH% |
| # Should typically be left as keystone unless you have a non-Keystone |
| # authentication API service |
| strategy = %IDENTITY_STRATEGY% |
| |
| [compute] |
| # This section contains configuration options used when executing tests |
| # against the OpenStack Compute API. |
| |
| # Allows test cases to create/destroy tenants and users. This option |
| # enables isolated test cases and better parallel execution, |
| # but also requires that OpenStack Identity API admin credentials |
| # are known. |
| allow_tenant_isolation = %COMPUTE_ALLOW_TENANT_ISOLATION% |
| |
| # Allows test cases to create/destroy tenants and users. This option |
| # enables isolated test cases and better parallel execution, |
| # but also requires that OpenStack Identity API admin credentials |
| # are known. |
| allow_tenant_reuse = %COMPUTE_ALLOW_TENANT_REUSE% |
| |
| # This should be the username of a user WITHOUT administrative privileges |
| username = %USERNAME% |
| # The above non-administrative user's password |
| password = %PASSWORD% |
| # The above non-administrative user's tenant name |
| tenant_name = %TENANT_NAME% |
| |
| # This should be the username of an alternate user WITHOUT |
| # administrative privileges |
| alt_username = %ALT_USERNAME% |
| # The above non-administrative user's password |
| alt_password = %ALT_PASSWORD% |
| # The above non-administrative user's tenant name |
| alt_tenant_name = %ALT_TENANT_NAME% |
| |
| # Reference data for tests. The ref and ref_alt should be |
| # distinct images/flavors. |
| image_ref = %IMAGE_ID% |
| image_ref_alt = %IMAGE_ID_ALT% |
| flavor_ref = %FLAVOR_REF% |
| flavor_ref_alt = %FLAVOR_REF_ALT% |
| |
| # Number of seconds to wait while looping to check the status of an |
| # instance that is building. |
| build_interval = %COMPUTE_BUILD_INTERVAL% |
| |
| # Number of seconds to time out on waiting for an instance |
| # to build or reach an expected status |
| build_timeout = %COMPUTE_BUILD_TIMEOUT% |
| |
| # The type of endpoint for a Compute API service. Unless you have a |
| # custom Keystone service catalog implementation, you probably want to leave |
| # this value as "compute" |
| catalog_type = %COMPUTE_CATALOG_TYPE% |
| |
| # Does the Compute API support creation of images? |
| create_image_enabled = %COMPUTE_CREATE_IMAGE_ENABLED% |
| |
| # For resize to work with libvirt/kvm, one of the following must be true: |
| # Single node: allow_resize_to_same_host=True must be set in nova.conf |
| # Cluster: the 'nova' user must have scp access between cluster nodes |
| resize_available = %COMPUTE_RESIZE_AVAILABLE% |
| |
| # Does the compute API support changing the admin password? |
| change_password_available = %COMPUTE_CHANGE_PASSWORD_AVAILABLE% |
| |
| # Level to log Compute API request/response details. |
| log_level = %COMPUTE_LOG_LEVEL% |
| |
| # Whitebox options for compute. Whitebox options enable the |
| # whitebox test cases, which look at internal Nova database state, |
| # SSH into VMs to check instance state, etc. |
| |
| # Should we run whitebox tests for Compute? |
| whitebox_enabled = %COMPUTE_WHITEBOX_ENABLED% |
| |
| # Path of nova source directory |
| source_dir = %COMPUTE_SOURCE_DIR% |
| |
| # Path of nova configuration file |
| config_path = %COMPUTE_CONFIG_PATH% |
| |
| # Directory containing nova binaries such as nova-manage |
| bin_dir = %COMPUTE_BIN_DIR% |
| |
| # Path to a private key file for SSH access to remote hosts |
| path_to_private_key = %COMPUTE_PATH_TO_PRIVATE_KEY% |
| |
| # Connection string to the database of Compute service |
| db_uri = %COMPUTE_DB_URI% |
| |
| # Run live migration tests (requires 2 hosts) |
| live_migration_available = %LIVE_MIGRATION_AVAILABLE% |
| |
| # Use block live migration (Otherwise, non-block migration will be |
| # performed, which requires XenServer pools in case of using XS) |
| use_block_migration_for_live_migration = %USE_BLOCK_MIGRATION_FOR_LIVE_MIGRATION% |
| |
| [image] |
| # This section contains configuration options used when executing tests |
| # against the OpenStack Images API |
| |
| # The type of endpoint for an Image API service. Unless you have a |
| # custom Keystone service catalog implementation, you probably want to leave |
| # this value as "image" |
| catalog_type = %IMAGE_CATALOG_TYPE% |
| |
| # The version of the OpenStack Images API to use |
| api_version = %IMAGE_API_VERSION% |
| |
| # This is the main host address of the Image API |
| host = %IMAGE_HOST% |
| |
| # Port that the Image API is running on |
| port = %IMAGE_PORT% |
| |
| # This should be the username of a user WITHOUT administrative privileges |
| username = %USERNAME% |
| # The above non-administrative user's password |
| password = %PASSWORD% |
| # The above non-administrative user's tenant name |
| tenant_name = %TENANT_NAME% |
| |
| [compute-admin] |
| # This section contains configuration options for an administrative |
| # user of the Compute API. These options are used in tests that stress |
| # the admin-only parts of the Compute API |
| |
| # This should be the username of a user WITH administrative privileges |
| username = %COMPUTE_ADMIN_USERNAME% |
| # The above administrative user's password |
| password = %COMPUTE_ADMIN_PASSWORD% |
| # The above administrative user's tenant name |
| tenant_name = %COMPUTE_ADMIN_TENANT_NAME% |
| |
| [identity-admin] |
| # This section contains configuration options for an administrative |
| # user of the Compute API. These options are used in tests that stress |
| # the admin-only parts of the Compute API |
| |
| # This should be the username of a user WITH administrative privileges |
| username = %IDENTITY_ADMIN_USERNAME% |
| # The above administrative user's password |
| password = %IDENTITY_ADMIN_PASSWORD% |
| # The above administrative user's tenant name |
| tenant_name = %IDENTITY_ADMIN_TENANT_NAME% |
| |
| [volume] |
| # This section contains the configuration options used when executing tests |
| # against the OpenStack Block Storage API service |
| |
| # The type of endpoint for a Cinder or Block Storage API service. |
| # Unless you have a custom Keystone service catalog implementation, you |
| # probably want to leave this value as "volume" |
| catalog_type = %VOLUME_CATALOG_TYPE% |
| # Number of seconds to wait while looping to check the status of a |
| # volume that is being made available |
| build_interval = %VOLUME_BUILD_INTERVAL% |
| # Number of seconds to time out on waiting for a volume |
| # to be available or reach an expected status |
| build_timeout = %VOLUME_BUILD_TIMEOUT% |
| |
| [object-storage] |
| # This section contains configuration options used when executing tests |
| # against the OpenStack Object Storage API. |
| # This should be the username of a user WITHOUT administrative privileges |
| |
| # You can configure the credentials in the compute section |
| |
| # The type of endpoint for an Object Storage API service. Unless you have a |
| # custom Keystone service catalog implementation, you probably want to leave |
| # this value as "object-store" |
| catalog_type = %OBJECT_CATALOG_TYPE% |
| |
| [boto] |
| # This section contains configuration options used when executing tests |
| # with boto. |
| |
| # EC2 URL |
| ec2_url = %BOTO_EC2_URL% |
| # S3 URL |
| s3_url = %BOTO_S3_URL% |
| |
| # Use keystone ec2-* command to get those values for your test user and tenant |
| aws_access = %BOTO_AWS_ACCESS% |
| aws_secret = %BOTO_AWS_SECRET% |
| |
| #Region |
| aws_region = %BOTO_AWS_REGION% |
| |
| #Image materials for S3 upload |
| # ALL content of the specified directory will be uploaded to S3 |
| s3_materials_path = %BOTO_S3_MATERIALS_PATH% |
| |
| # The manifest.xml files, must be in the s3_materials_path directory |
| # Subdirectories not allowed! |
| # The filenames will be used as a Keys in the S3 Buckets |
| |
| #ARI Ramdisk manifest. Must be in the above s3_materials_path directory |
| ari_manifest = %BOTO_ARI_MANIFEST% |
| |
| #AMI Machine Image manifest. Must be in the above s3_materials_path directory |
| ami_manifest = %BOTO_AMI_MANIFEST% |
| |
| #AKI Kernel Image manifest, Must be in the above s3_materials_path directory |
| aki_manifest = %BOTO_AKI_MANIFEST% |
| |
| #Instance type |
| instance_type = %BOTO_FLAVOR_NAME% |
| |
| #TCP/IP connection timeout |
| http_socket_timeout = %BOTO_SOCKET_TIMEOUT% |
| |
| # Status change wait timout |
| build_timeout = %BOTO_BUILD_TIMEOUT% |
| |
| # Status change wait interval |
| build_interval = %BOTO_BUILD_INTERVAL% |