| # Copyright 2020 Red Hat, Inc. |
| # All Rights Reserved. |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); you may |
| # not use this file except in compliance with the License. You may obtain |
| # a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, WITHOUT |
| # WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the |
| # License for the specific language governing permissions and limitations |
| # under the License. |
| |
| from neutron_lib import constants as lib_constants |
| from oslo_log import log |
| from tempest.common import utils as tempest_utils |
| from tempest.lib.common.utils import data_utils |
| from tempest.lib import decorators |
| from tempest.lib import exceptions as lib_exc |
| import testtools |
| |
| from neutron_tempest_plugin.common import ip |
| from neutron_tempest_plugin.common import ssh |
| from neutron_tempest_plugin.common import utils |
| from neutron_tempest_plugin import config |
| from neutron_tempest_plugin.scenario import base |
| |
| CONF = config.CONF |
| |
| LOG = log.getLogger(__name__) |
| |
| |
| def turn_nic6_on(ssh, ipv6_port): |
| """Turns the IPv6 vNIC on |
| |
| Required because guest images usually set only the first vNIC on boot. |
| Searches for the IPv6 vNIC's MAC and brings it up. |
| |
| @param ssh: RemoteClient ssh instance to server |
| @param ipv6_port: port from IPv6 network attached to the server |
| """ |
| ip_command = ip.IPCommand(ssh) |
| nic = ip_command.get_nic_name_by_mac(ipv6_port['mac_address']) |
| |
| # NOTE(slaweq): on RHEL based OS ifcfg file for new interface is |
| # needed to make IPv6 working on it, so if |
| # /etc/sysconfig/network-scripts directory exists ifcfg-%(nic)s file |
| # should be added in it |
| if sysconfig_network_scripts_dir_exists(ssh): |
| try: |
| ssh.execute_script( |
| 'echo -e "DEVICE=%(nic)s\\nNAME=%(nic)s\\nIPV6INIT=yes" | ' |
| 'tee /etc/sysconfig/network-scripts/ifcfg-%(nic)s; ' |
| 'nmcli connection reload' % {'nic': nic}, |
| become_root=True) |
| ssh.execute_script('nmcli connection up %s' % nic, |
| become_root=True) |
| except lib_exc.SSHExecCommandFailed as e: |
| # NOTE(slaweq): Sometimes it can happen that this SSH command |
| # will fail because of some error from network manager in |
| # guest os. |
| # But even then doing ip link set up below is fine and |
| # IP address should be configured properly. |
| LOG.debug("Error during restarting %(nic)s interface on " |
| "instance. Error message: %(error)s", |
| {'nic': nic, 'error': e}) |
| ip_command.set_link(nic, "up") |
| |
| |
| def sysconfig_network_scripts_dir_exists(ssh): |
| return "False" not in ssh.execute_script( |
| 'test -d /etc/sysconfig/network-scripts/ || echo "False"') |
| |
| |
| class IPv6Test(base.BaseTempestTestCase): |
| credentials = ['primary', 'admin'] |
| |
| ipv6_ra_mode = 'slaac' |
| ipv6_address_mode = 'slaac' |
| |
| @classmethod |
| def skip_checks(cls): |
| super(IPv6Test, cls).skip_checks() |
| if not CONF.network_feature_enabled.ipv6: |
| raise cls.skipException("IPv6 is not enabled") |
| |
| @classmethod |
| @tempest_utils.requires_ext(extension="router", service="network") |
| def resource_setup(cls): |
| super(IPv6Test, cls).resource_setup() |
| cls._setup_basic_resources() |
| |
| @classmethod |
| def _setup_basic_resources(cls): |
| cls.network = cls.create_network() |
| cls.subnet = cls.create_subnet(cls.network) |
| cls.router = cls.create_router_by_client() |
| cls.create_router_interface(cls.router['id'], cls.subnet['id']) |
| cls.keypair = cls.create_keypair() |
| cls.secgroup = cls.create_security_group( |
| name=data_utils.rand_name('secgroup')) |
| cls.create_loginable_secgroup_rule(secgroup_id=cls.secgroup['id']) |
| cls.create_pingable_secgroup_rule(secgroup_id=cls.secgroup['id']) |
| |
| def _test_ipv6_address_configured(self, ssh_client, vm, ipv6_port): |
| ipv6_address = ipv6_port['fixed_ips'][0]['ip_address'] |
| ip_command = ip.IPCommand(ssh_client) |
| |
| def guest_has_address(expected_address): |
| ip_addresses = [a.address for a in ip_command.list_addresses()] |
| for ip_address in ip_addresses: |
| if expected_address in ip_address: |
| return True |
| return False |
| |
| # Set NIC with IPv6 to be UP and wait until IPv6 address will be |
| # configured on this NIC |
| turn_nic6_on(ssh_client, ipv6_port) |
| # And check if IPv6 address will be properly configured on this NIC |
| utils.wait_until_true( |
| lambda: guest_has_address(ipv6_address), |
| timeout=120, |
| exception=RuntimeError( |
| "Timed out waiting for IP address {!r} to be configured in " |
| "the VM {!r}.".format(ipv6_address, vm['id']))) |
| |
| def _test_ipv6_hotplug(self, ra_mode, address_mode): |
| ipv6_networks = [self.create_network() for _ in range(2)] |
| for net in ipv6_networks: |
| subnet = self.create_subnet( |
| network=net, ip_version=6, |
| ipv6_ra_mode=ra_mode, ipv6_address_mode=address_mode) |
| self.create_router_interface(self.router['id'], subnet['id']) |
| |
| server_kwargs = { |
| 'flavor_ref': CONF.compute.flavor_ref, |
| 'image_ref': CONF.compute.image_ref, |
| 'key_name': self.keypair['name'], |
| 'networks': [ |
| {'uuid': self.network['id']}, |
| {'uuid': ipv6_networks[0]['id']}], |
| 'security_groups': [{'name': self.secgroup['name']}], |
| } |
| vm = self.create_server(**server_kwargs)['server'] |
| self.wait_for_server_active(vm) |
| ipv4_port = self.client.list_ports( |
| network_id=self.network['id'], |
| device_id=vm['id'])['ports'][0] |
| fip = self.create_floatingip(port=ipv4_port) |
| ssh_client = ssh.Client( |
| fip['floating_ip_address'], CONF.validation.image_ssh_user, |
| pkey=self.keypair['private_key']) |
| |
| ipv6_port = self.client.list_ports( |
| network_id=ipv6_networks[0]['id'], |
| device_id=vm['id'])['ports'][0] |
| self._test_ipv6_address_configured(ssh_client, vm, ipv6_port) |
| |
| # Now remove this port IPv6 port from the VM and attach new one |
| self.delete_interface(vm['id'], ipv6_port['id']) |
| |
| # And plug VM to the second IPv6 network |
| ipv6_port = self.create_port(ipv6_networks[1]) |
| self.create_interface(vm['id'], ipv6_port['id']) |
| ip.wait_for_interface_status( |
| self.os_primary.interfaces_client, vm['id'], |
| ipv6_port['id'], lib_constants.PORT_STATUS_ACTIVE, |
| ssh_client=ssh_client, mac_address=ipv6_port['mac_address']) |
| self._test_ipv6_address_configured(ssh_client, vm, ipv6_port) |
| |
| @testtools.skipUnless(CONF.network_feature_enabled.ipv6_subnet_attributes, |
| "DHCPv6 attributes are not enabled.") |
| @decorators.idempotent_id('b13e5408-5250-4a42-8e46-6996ce613e91') |
| def test_ipv6_hotplug_slaac(self): |
| self._test_ipv6_hotplug("slaac", "slaac") |
| |
| @testtools.skipUnless(CONF.network_feature_enabled.ipv6_subnet_attributes, |
| "DHCPv6 attributes are not enabled.") |
| @decorators.idempotent_id('9aaedbc4-986d-42d5-9177-3e721728e7e0') |
| def test_ipv6_hotplug_dhcpv6stateless(self): |
| self._test_ipv6_hotplug("dhcpv6-stateless", "dhcpv6-stateless") |