| # Licensed under the Apache License, Version 2.0 (the "License"); you may |
| # not use this file except in compliance with the License. You may obtain |
| # a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, WITHOUT |
| # WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the |
| # License for the specific language governing permissions and limitations |
| # under the License. |
| |
| from oslo_config import cfg |
| from tempest import config |
| |
| |
| CONF = config.CONF |
| |
| |
| NeutronPluginOptions = [ |
| cfg.ListOpt('provider_vlans', |
| default=[], |
| help='List of provider networks available in the deployment.'), |
| cfg.IntOpt('provider_net_base_segm_id', |
| default=3000, |
| help='Base segmentation ID to create provider networks. ' |
| 'This value will be increased in case of conflict.'), |
| cfg.BoolOpt('specify_floating_ip_address_available', |
| default=True, |
| help='Allow passing an IP Address of the floating ip when ' |
| 'creating the floating ip'), |
| cfg.ListOpt('available_type_drivers', |
| default=[], |
| help='List of network types available to neutron, ' |
| 'e.g. vxlan,vlan,gre.'), |
| cfg.StrOpt('agent_availability_zone', |
| help='The availability zone for all agents in the deployment. ' |
| 'Configure this only when the single value is used by ' |
| 'all agents in the deployment.'), |
| cfg.IntOpt('max_networks_per_project', |
| default=4, |
| help='Max number of networks per project. ' |
| 'Configure this only when project is limited with real ' |
| 'vlans in deployment.'), |
| cfg.StrOpt('l3_agent_mode', |
| help='The agent mode for L3 agents in the deployment. ' |
| 'Configure this only when the single value is used by ' |
| 'all agents in the deployment.'), |
| cfg.StrOpt('test_mtu_networks', |
| default='[{"provider:network_type":"vxlan",' |
| '"mtu":1200, "cidr":"10.100.0.0/16"}' |
| ',' |
| '{"provider:network_type":"vxlan",' |
| '"mtu":1300, "cidr":"10.200.0.0/16"}]', |
| help='Configuration for test networks. The format is JSON. ' |
| '"provider:network_type":<TYPE> - string ' |
| '"mtu":<MTU> - integer ' |
| '"cidr"<SUBNET/MASK> - string ' |
| '"provider:segmentation_id":<VLAN_ID> - integer'), |
| cfg.IntOpt('max_mtu', |
| default=1500, |
| help='Max mtu value of default deployments".'), |
| cfg.StrOpt('q_agent', |
| default=None, |
| choices=['None', 'linuxbridge', 'ovs', 'sriov'], |
| help='Agent used for devstack@q-agt.service'), |
| |
| # Multicast tests settings |
| cfg.StrOpt('multicast_group_range', |
| default='225.0.0.120-225.0.0.250', |
| help='Unallocated multi-cast IPv4 range, which will be used to ' |
| 'test the multi-cast support.'), |
| |
| # Option for feature to connect via SSH to VMs using an intermediate SSH |
| # server |
| cfg.StrOpt('ssh_proxy_jump_host', |
| default=None, |
| help='Proxy jump host used to connect via SSH to VMs..'), |
| cfg.StrOpt('ssh_proxy_jump_username', |
| default='root', |
| help='User name used to connect to "ssh_proxy_jump_host".'), |
| cfg.StrOpt('ssh_proxy_jump_password', |
| default=None, |
| help='Password used to connect to "ssh_proxy_jump_host".'), |
| cfg.StrOpt('ssh_proxy_jump_keyfile', |
| default=None, |
| help='Keyfile used to connect to "ssh_proxy_jump_host".'), |
| cfg.IntOpt('ssh_proxy_jump_port', |
| default=22, |
| help='Port used to connect to "ssh_proxy_jump_host".'), |
| |
| # Options for special, "advanced" image like e.g. Ubuntu. Such image can be |
| # used in tests which require some more advanced tool than available in |
| # Cirros |
| cfg.BoolOpt('default_image_is_advanced', |
| default=False, |
| help='Default image is an image which supports features ' |
| 'that Cirros does not, like Ubuntu or CentOS supporting ' |
| 'advanced features. ' |
| 'If this is set to True, "advanced_image_ref" option ' |
| 'is not required to be set.'), |
| cfg.StrOpt('advanced_image_ref', |
| default=None, |
| help='Valid advanced image uuid to be used in tests. ' |
| 'It is an image that supports features that Cirros ' |
| 'does not, like Ubuntu or CentOS supporting advanced ' |
| 'features.'), |
| cfg.StrOpt('advanced_image_flavor_ref', |
| default=None, |
| help='Valid flavor to use with advanced image in tests. ' |
| 'This is required if advanced image has to be used in ' |
| 'tests.'), |
| cfg.StrOpt('advanced_image_ssh_user', |
| default=None, |
| help='Name of ssh user to use with advanced image in tests. ' |
| 'This is required if advanced image has to be used in ' |
| 'tests.'), |
| |
| # Option for creating QoS policies configures as "shared". |
| # The default is false in order to prevent undesired usage |
| # while testing in parallel. |
| cfg.BoolOpt('create_shared_resources', |
| default=False, |
| help='Allow creation of shared resources.' |
| 'The default value is false.'), |
| ] |
| |
| # TODO(amuller): Redo configuration options registration as part of the planned |
| # transition to the Tempest plugin architecture |
| for opt in NeutronPluginOptions: |
| CONF.register_opt(opt, 'neutron_plugin_options') |
| |
| # TODO(slaweq): This config option is added to avoid running bgpvpn tests twice |
| # on stable branches till stable/stein. We need to remove this config option |
| # once stable/stein is EOL. Bgpvpn tempest plugin has been merged into |
| # neutron-tempest-plugin from Train. Train onwards bgpvpn tests will run from |
| # neutron-tempest-plugins. |
| BgpvpnGroup = [ |
| cfg.BoolOpt('run_bgpvpn_tests', |
| default=True, |
| help=("If it is set to False bgpvpn api and scenario tests " |
| "will be skipped")), |
| cfg.IntOpt('min_asn', |
| default=100, |
| help=("Minimum number for the range of " |
| "autonomous system number for distinguishers.")), |
| cfg.IntOpt('min_nn', |
| default=100, |
| help=("Minimum number for the range of " |
| "assigned number for distinguishers.")), |
| cfg.IntOpt('max_asn', |
| default=200, |
| help=("Maximum number for the range of " |
| "autonomous system number for distinguishers.")), |
| cfg.IntOpt('max_nn', |
| default=200, |
| help=("Maximum number for the range of " |
| "assigned number for distinguishers.")), |
| ] |
| |
| bgpvpn_group = cfg.OptGroup(name="bgpvpn", title=("Networking-Bgpvpn Service " |
| "Options")) |
| CONF.register_group(bgpvpn_group) |
| CONF.register_opts(BgpvpnGroup, group="bgpvpn") |
| |
| # TODO(slaweq): This config option is added to avoid running fwaas tests twice |
| # on stable branches till stable/stein. We need to remove this config option |
| # once stable/stein is EOL. Fwaas tempest plugin has been merged into |
| # neutron-tempest-plugin from Train. Train onwards fwaas tests will run from |
| # neutron-tempest-plugins. |
| FwaasGroup = [ |
| cfg.BoolOpt('run_fwaas_tests', |
| default=True, |
| help=("If it is set to False fwaas api and scenario tests " |
| "will be skipped")), |
| ] |
| |
| fwaas_group = cfg.OptGroup( |
| name="fwaas", title=("Neutron-fwaas Service Options")) |
| CONF.register_group(fwaas_group) |
| CONF.register_opts(FwaasGroup, group="fwaas") |
| |
| # TODO(slaweq): This config option is added to avoid running SFC tests twice |
| # on stable branches till stable/stein. We need to remove this config option |
| # once stable/stein is EOL. SFC tempest plugin has been merged into |
| # neutron-tempest-plugin from Train. Train onwards SFC tests will run from |
| # neutron-tempest-plugins. |
| SfcGroup = [ |
| cfg.BoolOpt('run_sfc_tests', |
| default=True, |
| help=("If it is set to False SFC api and scenario tests " |
| "will be skipped")), |
| ] |
| |
| sfc_group = cfg.OptGroup(name="sfc", title=("Networking-sfc Service Options")) |
| CONF.register_group(sfc_group) |
| CONF.register_opts(SfcGroup, group="sfc") |
| |
| config_opts_translator = { |
| 'project_network_cidr': 'tenant_network_cidr', |
| 'project_network_v6_cidr': 'tenant_network_v6_cidr', |
| 'project_network_mask_bits': 'tenant_network_mask_bits', |
| 'project_network_v6_mask_bits': 'tenant_network_v6_mask_bits'} |
| |
| |
| def safe_get_config_value(group, name): |
| """Safely get Oslo config opts from Tempest, using old and new names.""" |
| conf_group = getattr(CONF, group) |
| |
| try: |
| return getattr(conf_group, name) |
| except cfg.NoSuchOptError: |
| return getattr(conf_group, config_opts_translator[name]) |