| # Copyright 2015 NEC Corporation |
| # All Rights Reserved. |
| # |
| # Copyright (c) 2022 Dell Inc. or its subsidiaries. |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); you may |
| # not use this file except in compliance with the License. You may obtain |
| # a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, WITHOUT |
| # WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the |
| # License for the specific language governing permissions and limitations |
| # under the License. |
| |
| from oslo_config import cfg |
| |
| from tempest import config # noqa |
| |
| |
| # NOTE(TheJulia): The following options are loaded into a tempest |
| # plugin configuration option via plugin.py. |
| ironic_service_option = cfg.BoolOpt('ironic', |
| default=False, |
| help='Whether or not ironic is expected ' |
| 'to be available') |
| |
| inspector_service_option = cfg.BoolOpt("ironic_inspector", |
| default=False, |
| help="Whether or not ironic-inspector " |
| "is expected to be available") |
| |
| ironic_scope_enforcement = cfg.BoolOpt('ironic', |
| default=False, |
| help='Wheter or not ironic is ' |
| 'exepcted to enforce auth ' |
| 'scope.') |
| |
| inspector_scope_enforcement = cfg.BoolOpt('ironic_inspector', |
| default=False, |
| help='Whether or not ' |
| 'ironic-inspector is expected ' |
| 'to enforce auth scope.') |
| |
| baremetal_group = cfg.OptGroup(name='baremetal', |
| title='Baremetal provisioning service options', |
| help='When enabling baremetal tests, Nova ' |
| 'must be configured to use the Ironic ' |
| 'driver. The following parameters for the ' |
| '[compute] section must be disabled: ' |
| 'console_output, interface_attach, ' |
| 'live_migration, pause, rescue, resize, ' |
| 'shelve, snapshot, and suspend') |
| |
| # The bulk of the embedded configuration is below. |
| |
| baremetal_introspection_group = cfg.OptGroup( |
| name="baremetal_introspection", |
| title="Baremetal introspection service options", |
| help="When enabling baremetal introspection tests," |
| "Ironic must be configured.") |
| |
| baremetal_features_group = cfg.OptGroup( |
| name='baremetal_feature_enabled', |
| title="Enabled Baremetal Service Features") |
| |
| BaremetalGroup = [ |
| cfg.StrOpt('catalog_type', |
| default='baremetal', |
| help="Catalog type of the baremetal provisioning service"), |
| cfg.StrOpt('driver', |
| default='fake-hardware', |
| help="Driver name to use for API tests"), |
| cfg.StrOpt('endpoint_type', |
| default='publicURL', |
| choices=['public', 'admin', 'internal', |
| 'publicURL', 'adminURL', 'internalURL'], |
| help="The endpoint type to use for the baremetal provisioning" |
| " service"), |
| cfg.StrOpt('root_device_name', |
| default='/dev/md0', |
| help="Root device name to be used for node deployment"), |
| cfg.IntOpt('deploywait_timeout', |
| default=15, |
| help="Timeout for Ironic node to reach the " |
| "wait-callback state after powering on."), |
| cfg.IntOpt('active_timeout', |
| default=300, |
| help="Timeout for Ironic node to completely provision"), |
| cfg.IntOpt('association_timeout', |
| default=30, |
| help="Timeout for association of Nova instance and Ironic " |
| "node"), |
| cfg.IntOpt('power_timeout', |
| default=60, |
| help="Timeout for Ironic power transitions."), |
| cfg.IntOpt('unprovision_timeout', |
| default=300, |
| help="Timeout for unprovisioning an Ironic node. " |
| "Takes longer since Kilo as Ironic performs an extra " |
| "step in Node cleaning."), |
| cfg.IntOpt('rescue_timeout', |
| default=300, |
| help="Timeout for rescuing an Ironic node."), |
| cfg.IntOpt('unrescue_timeout', |
| default=300, |
| help="Timeout for unrescuing an Ironic node."), |
| cfg.StrOpt('min_microversion', |
| help="Lower version of the test target microversion range. " |
| "The format is 'X.Y', where 'X' and 'Y' are int values. " |
| "Tempest selects tests based on the range between " |
| "min_microversion and max_microversion. " |
| "If both values are None, Tempest avoids tests which " |
| "require a microversion."), |
| cfg.StrOpt('max_microversion', |
| default='latest', |
| help="Upper version of the test target microversion range. " |
| "The format is 'X.Y', where 'X' and 'Y' are int values. " |
| "Tempest selects tests based on the range between " |
| "min_microversion and max_microversion. " |
| "If both values are None, Tempest avoids tests which " |
| "require a microversion."), |
| cfg.BoolOpt('use_provision_network', |
| default=False, |
| help="Whether the Ironic/Neutron tenant isolation is enabled"), |
| cfg.StrOpt('whole_disk_image_ref', |
| help="UUID of the wholedisk image to use in the tests."), |
| cfg.StrOpt('whole_disk_image_url', |
| help="An http link to the wholedisk image to use in the " |
| "tests."), |
| cfg.StrOpt('whole_disk_image_checksum', |
| help="An MD5 checksum of the image."), |
| cfg.StrOpt('partition_image_ref', |
| help="UUID of the partitioned image to use in the tests."), |
| cfg.StrOpt('ramdisk_iso_image_ref', |
| help=("UUID (or url) of an ISO image for the ramdisk boot " |
| "tests.")), |
| cfg.StrOpt('storage_inventory_file', |
| help="Path to storage inventory file for RAID cleaning tests."), |
| cfg.StrOpt('export_location', |
| help="Export config location for configuration molds."), |
| cfg.StrOpt('import_location', |
| help="Import config location for configuration molds."), |
| cfg.StrOpt('rollback_import_location', |
| help="Rollback import config location for configuration " |
| "molds. Optional. If not provided, rollback is skipped."), |
| cfg.ListOpt('enabled_drivers', |
| default=['fake', 'pxe_ipmitool', 'agent_ipmitool'], |
| help="List of Ironic enabled drivers."), |
| cfg.ListOpt('enabled_hardware_types', |
| default=['ipmi'], |
| help="List of Ironic enabled hardware types."), |
| cfg.ListOpt('enabled_bios_interfaces', |
| default=['fake'], |
| help="List of Ironic enabled bios interfaces."), |
| cfg.ListOpt('enabled_deploy_interfaces', |
| default=['iscsi', 'direct'], |
| help="List of Ironic enabled deploy interfaces."), |
| cfg.ListOpt('enabled_rescue_interfaces', |
| default=['no-rescue'], |
| help="List of Ironic enabled rescue interfaces."), |
| cfg.ListOpt('enabled_boot_interfaces', |
| default=['fake', 'pxe'], |
| help="List of Ironic enabled boot interfaces."), |
| cfg.ListOpt('enabled_raid_interfaces', |
| default=['no-raid', 'agent'], |
| help="List of Ironic enabled RAID interfaces."), |
| cfg.ListOpt('enabled_management_interfaces', |
| default=['fake', 'ipmitool', 'noop'], |
| help="List of Ironic enabled management interfaces."), |
| cfg.ListOpt('enabled_power_interfaces', |
| default=['fake', 'ipmitool'], |
| help="List of Ironic enabled power interfaces."), |
| cfg.StrOpt('default_rescue_interface', |
| help="Ironic default rescue interface."), |
| cfg.StrOpt('firmware_image_url', |
| help="Image URL of firmware image file supported by " |
| "update_firmware clean step."), |
| cfg.StrOpt('firmware_image_checksum', |
| help="SHA1 checksum of firmware image file."), |
| cfg.StrOpt('firmware_rollback_image_url', |
| help="Image URL of firmware update cleaning step's " |
| "rollback image. Optional. If not provided, " |
| "rollback is skipped."), |
| cfg.StrOpt('firmware_rollback_image_checksum', |
| help="SHA1 checksum of firmware rollback image file. " |
| "This is required if firmware_rollback_image_url is set."), |
| cfg.IntOpt('adjusted_root_disk_size_gb', |
| min=0, |
| help="Ironic adjusted disk size to use in the standalone tests " |
| "as instance_info/root_gb value."), |
| cfg.IntOpt('available_nodes', min=0, default=None, |
| help="The number of baremetal hosts available to use for " |
| "the tests."), |
| cfg.BoolOpt('partition_netboot', |
| default=True, |
| help="Treat partition images as netbooted as opposed to " |
| "attempting to populate a boot loader. IF cirros is " |
| "being used, this option should be set to True as " |
| "it lacks the needed components to make it locally " |
| "from a partition image."), |
| cfg.StrOpt('boot_mode', |
| default='bios', |
| choices=['bios', 'uefi'], |
| help="The desired boot_mode to be used on testing nodes."), |
| cfg.StrOpt('default_boot_option', |
| # No good default here, we need to actually set it. |
| help="The default boot option the testing nodes are using."), |
| ] |
| |
| BaremetalFeaturesGroup = [ |
| cfg.BoolOpt('ipxe_enabled', |
| default=True, |
| help="Defines if IPXE is enabled"), |
| cfg.BoolOpt('adoption', |
| # Defaults to False since it's a destructive operation AND it |
| # requires the plugin to be able to read ipmi_password. |
| default=False, |
| help="Defines if adoption is enabled"), |
| cfg.BoolOpt('software_raid', |
| default=False, |
| help="Defines if software RAID is enabled (available " |
| "starting with Train). Requires at least two disks " |
| "on testing nodes."), |
| cfg.BoolOpt('deploy_time_raid', |
| default=False, |
| help="Defines if in-band RAID can be built in deploy time " |
| "(possible starting with Victoria)."), |
| ] |
| |
| BaremetalIntrospectionGroup = [ |
| cfg.StrOpt('catalog_type', |
| default='baremetal-introspection', |
| help="Catalog type of the baremetal provisioning service"), |
| cfg.StrOpt('endpoint_type', |
| default='publicURL', |
| choices=['public', 'admin', 'internal', |
| 'publicURL', 'adminURL', 'internalURL'], |
| help="The endpoint type to use for the baremetal introspection" |
| " service"), |
| cfg.IntOpt('introspection_sleep', |
| default=30, |
| help="Introspection sleep before check status"), |
| cfg.IntOpt('introspection_timeout', |
| default=600, |
| help="Introspection time out"), |
| cfg.IntOpt('introspection_start_timeout', |
| default=90, |
| help="Timeout to start introspection"), |
| cfg.IntOpt('hypervisor_update_sleep', |
| default=60, |
| help="Time to wait until nova becomes aware of " |
| "bare metal instances"), |
| cfg.IntOpt('hypervisor_update_timeout', |
| default=300, |
| help="Time out for wait until nova becomes aware of " |
| "bare metal instances"), |
| # NOTE(aarefiev): status_check_period default is 60s, but checking |
| # node state takes some time(API call), so races appear here, |
| # 80s would be enough to make one more check. |
| cfg.IntOpt('ironic_sync_timeout', |
| default=80, |
| help="Time it might take for Ironic--Inspector " |
| "sync to happen"), |
| cfg.IntOpt('discovery_timeout', |
| default=300, |
| help="Time to wait until new node would enrolled in " |
| "ironic"), |
| cfg.BoolOpt('auto_discovery_feature', |
| default=False, |
| help="Is the auto-discovery feature enabled. Enroll hook " |
| "should be specified in node_not_found_hook - processing " |
| "section of inspector.conf"), |
| cfg.StrOpt('auto_discovery_default_driver', |
| # TODO(dtantsur): change to fake-hardware when Queens is no |
| # longer supported. |
| default='fake', |
| help="The driver expected to be set on newly discovered nodes. " |
| "Only has effect with auto_discovery_feature is True."), |
| cfg.StrOpt('auto_discovery_target_driver', |
| help="The driver to set on the newly discovered nodes. " |
| "Only has effect with auto_discovery_feature is True."), |
| cfg.StrOpt('data_store', |
| help="The storage backend for storing introspection data."), |
| ] |