| parameters: |
| # Simulate escape sequence to not interpolate some values, |
| # so these values may get into the node yamls as ${_param:...} |
| _param: |
| _esc: $ |
| |
| reclass: |
| storage: |
| node: |
| infra_kvm_node01: |
| params: |
| # Use interfaces configuration from the context file, |
| # or generate your own 'linux.network.interface' object using |
| # additional inventory. |
| # For example, you can take the 'inventory_node_name' and find it's config |
| # in an additional dict inventory[inventory_node_name] loaded from custom_inventory.yaml, |
| # or skip the original context from 'cookiecutter' object and iterate only custom inventory. |
| linux_network_interfaces: |
| bond0: |
| enabled: true |
| mode: active-backup |
| proto: manual |
| slaves: enp2s0f1 |
| type: bond |
| use_interfaces: # Remove 'use_interfaces' after https://gerrit.mcp.mirantis.com/#/c/8344 |
| - enp2s0f1 |
| require_interfaces: |
| - enp2s0f1 |
| bond0.2416: |
| enabled: true |
| proto: manual |
| type: vlan |
| use_interfaces: # Remove 'use_interfaces' after https://gerrit.mcp.mirantis.com/#/c/8344 |
| - bond0 |
| require_interfaces: |
| - bond0 |
| br_ctl: |
| address: ${_param:_esc}{_param:single_address} |
| enabled: true |
| netmask: 255.255.255.0 |
| proto: static |
| type: bridge |
| use_interfaces: # Remove 'use_interfaces' after https://gerrit.mcp.mirantis.com/#/c/8344 |
| - bond0.2416 |
| require_interfaces: |
| - bond0.2416 |
| br_mgm: |
| address: ${_param:_esc}{_param:deploy_address} |
| enabled: true |
| gateway: 172.16.49.1 |
| name_servers: |
| - 8.8.8.8 |
| - 8.8.4.4 |
| netmask: 255.255.255.192 |
| proto: static |
| type: bridge |
| use_interfaces: # Remove 'use_interfaces' after https://gerrit.mcp.mirantis.com/#/c/8344 |
| - enp2s0f0 |
| require_interfaces: |
| - enp2s0f0 |
| eth1: |
| enabled: true |
| name: enp2s0f1 |
| proto: manual |
| type: eth |
| ipflush_onchange: true |
| eth2: |
| enabled: true |
| name: enp2s0f0 |
| proto: manual |
| type: eth |
| ipflush_onchange: true |
| |
| classes: |
| - environment.lab03_ovs_dpdk.common |
| |
| infra_kvm_node02: |
| params: |
| # Use interfaces configuration from the context file, |
| # or generate your own 'linux.network.interface' object using |
| # additional inventory. |
| # For example, you can take the 'inventory_node_name' and find it's config |
| # in an additional dict inventory[inventory_node_name] loaded from custom_inventory.yaml, |
| # or skip the original context from 'cookiecutter' object and iterate only custom inventory. |
| linux_network_interfaces: |
| bond0: |
| enabled: true |
| mode: active-backup |
| proto: manual |
| slaves: enp2s0f1 |
| type: bond |
| use_interfaces: # Remove 'use_interfaces' after https://gerrit.mcp.mirantis.com/#/c/8344 |
| - enp2s0f1 |
| require_interfaces: |
| - enp2s0f1 |
| bond0.2416: |
| enabled: true |
| proto: manual |
| type: vlan |
| use_interfaces: # Remove 'use_interfaces' after https://gerrit.mcp.mirantis.com/#/c/8344 |
| - bond0 |
| require_interfaces: |
| - bond0 |
| br_ctl: |
| address: ${_param:_esc}{_param:single_address} |
| enabled: true |
| netmask: 255.255.255.0 |
| proto: static |
| type: bridge |
| use_interfaces: # Remove 'use_interfaces' after https://gerrit.mcp.mirantis.com/#/c/8344 |
| - bond0.2416 |
| require_interfaces: |
| - bond0.2416 |
| br_mgm: |
| address: ${_param:_esc}{_param:deploy_address} |
| enabled: true |
| gateway: 172.16.49.1 |
| name_servers: |
| - 8.8.8.8 |
| - 8.8.4.4 |
| netmask: 255.255.255.192 |
| proto: static |
| type: bridge |
| use_interfaces: # Remove 'use_interfaces' after https://gerrit.mcp.mirantis.com/#/c/8344 |
| - enp2s0f0 |
| require_interfaces: |
| - enp2s0f0 |
| eth1: |
| enabled: true |
| name: enp2s0f1 |
| proto: manual |
| type: eth |
| ipflush_onchange: true |
| eth2: |
| enabled: true |
| name: enp2s0f0 |
| proto: manual |
| type: eth |
| ipflush_onchange: true |
| |
| classes: |
| - environment.lab03_ovs_dpdk.common |
| |
| infra_kvm_node03: |
| params: |
| # Use interfaces configuration from the context file, |
| # or generate your own 'linux.network.interface' object using |
| # additional inventory. |
| # For example, you can take the 'inventory_node_name' and find it's config |
| # in an additional dict inventory[inventory_node_name] loaded from custom_inventory.yaml, |
| # or skip the original context from 'cookiecutter' object and iterate only custom inventory. |
| linux_network_interfaces: |
| bond0: |
| enabled: true |
| mode: active-backup |
| proto: manual |
| slaves: eno2 |
| type: bond |
| use_interfaces: # Remove 'use_interfaces' after https://gerrit.mcp.mirantis.com/#/c/8344 |
| - eno2 |
| require_interfaces: |
| - eno2 |
| bond0.2416: |
| enabled: true |
| proto: manual |
| type: vlan |
| use_interfaces: # Remove 'use_interfaces' after https://gerrit.mcp.mirantis.com/#/c/8344 |
| - bond0 |
| require_interfaces: |
| - bond0 |
| br_ctl: |
| address: ${_param:_esc}{_param:single_address} |
| enabled: true |
| netmask: 255.255.255.0 |
| proto: static |
| type: bridge |
| use_interfaces: # Remove 'use_interfaces' after https://gerrit.mcp.mirantis.com/#/c/8344 |
| - bond0.2416 |
| require_interfaces: |
| - bond0.2416 |
| br_mgm: |
| address: ${_param:_esc}{_param:deploy_address} |
| enabled: true |
| gateway: 172.16.49.1 |
| name_servers: |
| - 8.8.8.8 |
| - 8.8.4.4 |
| netmask: 255.255.255.192 |
| proto: static |
| type: bridge |
| use_interfaces: # Remove 'use_interfaces' after https://gerrit.mcp.mirantis.com/#/c/8344 |
| - eno1 |
| require_interfaces: |
| - eno1 |
| eth1: |
| enabled: true |
| name: eno2 |
| proto: manual |
| type: eth |
| ipflush_onchange: true |
| eth2: |
| enabled: true |
| name: eno1 |
| proto: manual |
| type: eth |
| ipflush_onchange: true |
| |
| classes: |
| - environment.lab03_ovs_dpdk.common |
| |
| openstack_compute_node01: |
| params: |
| # Use interfaces configuration from the context file, |
| # or generate your own 'linux.network.interface' object using |
| # additional inventory. |
| # For example, you can take the 'inventory_node_name' and find it's config |
| # in an additional dict inventory[inventory_node_name] loaded from custom_inventory.yaml, |
| # or skip the original context from 'cookiecutter' object and iterate only custom inventory. |
| linux_network_interfaces: |
| dpdk0: |
| bond: dpdkbond1 |
| driver: igb_uio |
| enabled: true |
| n_rxq: 2 |
| name: enp5s0f1 |
| pci: '0000:05:00.1' |
| type: dpdk_ovs_port |
| dpdk1: |
| bond: dpdkbond1 |
| driver: igb_uio |
| enabled: true |
| n_rxq: 2 |
| name: enp5s0f2 |
| pci: '0000:05:00.2' |
| type: dpdk_ovs_port |
| dpdkbond1: |
| bridge: br-prv |
| enabled: true |
| mode: active-backup |
| type: dpdk_ovs_bond |
| br-prv: |
| address: ${_param:_esc}{_param:tenant_address} |
| enabled: true |
| netmask: 255.255.255.0 |
| type: dpdk_ovs_bridge |
| iface1: |
| enabled: true |
| master: bond0 |
| name: enp3s0f1 |
| proto: manual |
| type: slave |
| ipflush_onchange: true |
| iface2: |
| enabled: true |
| master: bond0 |
| name: enp5s0f0 |
| proto: manual |
| type: slave |
| ipflush_onchange: true |
| bond0: |
| enabled: true |
| mode: active-backup |
| proto: manual |
| slaves: enp3s0f1 enp5s0f0 |
| type: bond |
| use_interfaces: # Remove 'use_interfaces' after https://gerrit.mcp.mirantis.com/#/c/8344 |
| - enp3s0f1 |
| - enp5s0f0 |
| require_interfaces: |
| - enp3s0f1 |
| - enp5s0f0 |
| bond0.2416: |
| enabled: true |
| proto: manual |
| type: vlan |
| use_interfaces: # Remove 'use_interfaces' after https://gerrit.mcp.mirantis.com/#/c/8344 |
| - bond0 |
| require_interfaces: |
| - bond0 |
| br_ctl: |
| address: ${_param:_esc}{_param:control_address} |
| enabled: true |
| netmask: 255.255.255.0 |
| proto: static |
| type: bridge |
| use_interfaces: # Remove 'use_interfaces' after https://gerrit.mcp.mirantis.com/#/c/8344 |
| - bond0.2416 |
| require_interfaces: |
| - bond0.2416 |
| |
| classes: |
| - environment.lab03_ovs_dpdk.common |
| |
| openstack_compute_node02: |
| params: |
| # Use interfaces configuration from the context file, |
| # or generate your own 'linux.network.interface' object using |
| # additional inventory. |
| # For example, you can take the 'inventory_node_name' and find it's config |
| # in an additional dict inventory[inventory_node_name] loaded from custom_inventory.yaml, |
| # or skip the original context from 'cookiecutter' object and iterate only custom inventory. |
| linux_network_interfaces: |
| eth1: |
| enabled: true |
| master: bond0 |
| name: eth0 |
| proto: manual |
| type: slave |
| ipflush_onchange: true |
| # eth2: |
| # enabled: true |
| # master: bond0 |
| # name: eth3 |
| # proto: manual |
| # type: slave |
| # ipflush_onchange: true |
| bond0: |
| enabled: true |
| mode: active-backup |
| proto: manual |
| # slaves: eth0 eth3 |
| slaves: eth0 |
| type: bond |
| use_interfaces: # Remove 'use_interfaces' after https://gerrit.mcp.mirantis.com/#/c/8344 |
| - eth0 |
| # - eth3 |
| require_interfaces: |
| - eth0 |
| # - eth3 |
| bond0.2416: |
| enabled: true |
| proto: manual |
| type: vlan |
| use_interfaces: # Remove 'use_interfaces' after https://gerrit.mcp.mirantis.com/#/c/8344 |
| - bond0 |
| require_interfaces: |
| - bond0 |
| br-prv: |
| address: ${_param:_esc}{_param:tenant_address} |
| enabled: true |
| netmask: 255.255.255.0 |
| type: dpdk_ovs_bridge |
| br_ctl: |
| address: ${_param:_esc}{_param:control_address} |
| enabled: true |
| netmask: 255.255.255.0 |
| proto: static |
| type: bridge |
| use_interfaces: # Remove 'use_interfaces' after https://gerrit.mcp.mirantis.com/#/c/8344 |
| - bond0.2416 |
| require_interfaces: |
| - bond0.2416 |
| dpdk0: |
| bond: dpdkbond1 |
| driver: igb_uio |
| enabled: true |
| n_rxq: 2 |
| name: eth2 |
| pci: '0000:05:00.1' |
| type: dpdk_ovs_port |
| dpdk1: |
| bond: dpdkbond1 |
| driver: igb_uio |
| enabled: true |
| n_rxq: 2 |
| name: eth4 |
| pci: 0000:0b:00.0 |
| type: dpdk_ovs_port |
| dpdkbond1: |
| bridge: br-prv |
| enabled: true |
| mode: active-backup |
| type: dpdk_ovs_bond |
| |
| classes: |
| - environment.lab03_ovs_dpdk.common |
| |
| openstack_gateway_node01: |
| params: |
| # Use interfaces configuration from the context file, |
| # or generate your own 'linux.network.interface' object using |
| # additional inventory. |
| # For example, you can take the 'inventory_node_name' and find it's config |
| # in an additional dict inventory[inventory_node_name] loaded from custom_inventory.yaml, |
| # or skip the original context from 'cookiecutter' object and iterate only custom inventory. |
| linux_network_interfaces: |
| primary_first_nic: |
| enabled: true |
| master: bond0 |
| name: enp3s0f1 |
| proto: manual |
| type: slave |
| ipflush_onchange: true |
| bond0: |
| enabled: true |
| mode: active-backup |
| proto: manual |
| slaves: enp3s0f1 |
| type: bond |
| use_interfaces: # Remove 'use_interfaces' after https://gerrit.mcp.mirantis.com/#/c/8344 |
| - enp3s0f1 |
| require_interfaces: |
| - enp3s0f1 |
| bond0.2416: |
| enabled: true |
| proto: manual |
| type: vlan |
| use_interfaces: |
| - bond0 |
| bond0.2417: |
| enabled: true |
| proto: manual |
| type: vlan |
| use_interfaces: |
| - bond0 |
| |
| br_ctl: |
| enabled: true |
| proto: static |
| type: bridge |
| address: ${_param:_esc}{_param:single_address} |
| netmask: 255.255.255.0 |
| use_interfaces: |
| - bond0.2416 |
| |
| br-floating: |
| enabled: true |
| type: ovs_bridge |
| br-ex: |
| enabled: true |
| proto: static |
| type: bridge |
| address: 172.17.42.135 |
| netmask: 255.255.255.192 |
| gateway: 172.17.42.129 |
| use_interfaces: |
| - bond0.2417 |
| use_ovs_ports: |
| - float-to-ex |
| float-to-ex: |
| enabled: true |
| type: ovs_port |
| bridge: br-floating |
| |
| br-prv: |
| enabled: true |
| type: ovs_bridge |
| br_ten: |
| enabled: true |
| proto: manual |
| type: bridge |
| use_interfaces: |
| - bond0 |
| use_ovs_ports: |
| - prv-to-tenant |
| prv-to-tenant: |
| enabled: true |
| type: ovs_port |
| bridge: br-prv |
| |
| classes: |
| - environment.lab03_ovs_dpdk.common |
| |
| openstack_gateway_node02: |
| params: |
| # Use interfaces configuration from the context file, |
| # or generate your own 'linux.network.interface' object using |
| # additional inventory. |
| # For example, you can take the 'inventory_node_name' and find it's config |
| # in an additional dict inventory[inventory_node_name] loaded from custom_inventory.yaml, |
| # or skip the original context from 'cookiecutter' object and iterate only custom inventory. |
| linux_network_interfaces: |
| primary_first_nic: |
| enabled: true |
| master: bond0 |
| name: eno2 |
| proto: manual |
| type: slave |
| ipflush_onchange: true |
| bond0: |
| enabled: true |
| mode: active-backup |
| proto: manual |
| slaves: eno2 |
| type: bond |
| use_interfaces: # Remove 'use_interfaces' after https://gerrit.mcp.mirantis.com/#/c/8344 |
| - eno2 |
| require_interfaces: |
| - eno2 |
| bond0.2416: |
| enabled: true |
| proto: manual |
| type: vlan |
| use_interfaces: |
| - bond0 |
| bond0.2417: |
| enabled: true |
| proto: manual |
| type: vlan |
| use_interfaces: |
| - bond0 |
| |
| br_ctl: |
| enabled: true |
| proto: static |
| type: bridge |
| address: ${_param:_esc}{_param:single_address} |
| netmask: 255.255.255.0 |
| use_interfaces: |
| - bond0.2416 |
| |
| br-floating: |
| enabled: true |
| type: ovs_bridge |
| br-ex: |
| enabled: true |
| proto: static |
| type: bridge |
| address: 172.17.42.136 |
| netmask: 255.255.255.192 |
| gateway: 172.17.42.129 |
| use_interfaces: |
| - bond0.2417 |
| use_ovs_ports: |
| - float-to-ex |
| float-to-ex: |
| enabled: true |
| type: ovs_port |
| bridge: br-floating |
| |
| br-prv: |
| enabled: true |
| type: ovs_bridge |
| br_ten: |
| enabled: true |
| proto: manual |
| type: bridge |
| use_interfaces: |
| - bond0 |
| use_ovs_ports: |
| - prv-to-tenant |
| prv-to-tenant: |
| enabled: true |
| type: ovs_port |
| bridge: br-prv |
| |
| classes: |
| - environment.lab03_ovs_dpdk.common |