{%- from "postgresql/map.jinja" import server, cluster with context -%}
# -----------------------------
# PostgreSQL configuration file
# -----------------------------
#
# This file consists of lines of the form:
#
#   name = value
#
# (The "=" is optional.)  Whitespace may be used.  Comments are introduced with
# "#" anywhere on a line.  The complete list of parameter names and allowed
# values can be found in the PostgreSQL documentation.
#
# The commented-out settings shown in this file represent the default values.
# Re-commenting a setting is NOT sufficient to revert it to the default value;
# you need to reload the server.
#
# This file is read on server startup and when the server receives a SIGHUP
# signal.  If you edit the file on a running system, you have to SIGHUP the
# server for the changes to take effect, or use "pg_ctl reload".  Some
# parameters, which are marked below, require a server shutdown and restart to
# take effect.
#
# Any parameter can also be given as a command-line option to the server, e.g.,
# "postgres -c log_connections=on".  Some parameters can be changed at run time
# with the "SET" SQL command.
#
# Memory units:  kB = kilobytes        Time units:  ms  = milliseconds
#                MB = megabytes                     s   = seconds
#                GB = gigabytes                     min = minutes
#                TB = terabytes                     h   = hours
#                                                   d   = days


#------------------------------------------------------------------------------
# FILE LOCATIONS
#------------------------------------------------------------------------------

# The default values of these variables are driven from the -D command-line
# option or PGDATA environment variable, represented here as ConfigDir.

data_directory = '{{ server.dir.data }}'        # use data in another directory
                         # (change requires restart)
hba_file = '/etc/postgresql/9.6/main/pg_hba.conf' # host-based authentication file
                         # (change requires restart)
ident_file = '/etc/postgresql/9.6/main/pg_ident.conf'  # ident configuration file
                         # (change requires restart)

# If external_pid_file is not explicitly set, no extra PID file is written.
external_pid_file = '/var/run/postgresql/9.6-main.pid'           # write an extra PID file
                         # (change requires restart)


#------------------------------------------------------------------------------
# CONNECTIONS AND AUTHENTICATION
#------------------------------------------------------------------------------

# - Connection Settings -
{%- if server.bind.address == '0.0.0.0' %}
listen_addresses = '*'
{%- else %}
listen_addresses = 'localhost{% if server.bind.address != "127.0.0.1" %}, {{ server.bind.address }}'{% endif %}
{%- endif %}
port = {{ server.bind.get('port', '5432') }}

#listen_addresses = 'localhost'         # what IP address(es) to listen on;
                         # comma-separated list of addresses;
                         # defaults to 'localhost'; use '*' for all
                         # (change requires restart)
#port = 5433                   # (change requires restart)
max_connections = 100              # (change requires restart)
#superuser_reserved_connections = 3     # (change requires restart)
unix_socket_directories = '/var/run/postgresql'   # comma-separated list of directories
                         # (change requires restart)
#unix_socket_group = ''            # (change requires restart)
#unix_socket_permissions = 0777         # begin with 0 to use octal notation
                         # (change requires restart)
#bonjour = off                # advertise server via Bonjour
                         # (change requires restart)
#bonjour_name = ''            # defaults to the computer name
                         # (change requires restart)

# - Security and Authentication -

#authentication_timeout = 1min          # 1s-600s
ssl = true                    # (change requires restart)
#ssl_ciphers = 'HIGH:MEDIUM:+3DES:!aNULL' # allowed SSL ciphers
                         # (change requires restart)
#ssl_prefer_server_ciphers = on         # (change requires restart)
#ssl_ecdh_curve = 'prime256v1'          # (change requires restart)
ssl_cert_file = '/etc/ssl/certs/ssl-cert-snakeoil.pem'      # (change requires restart)
ssl_key_file = '/etc/ssl/private/ssl-cert-snakeoil.key'          # (change requires restart)
#ssl_ca_file = ''             # (change requires restart)
#ssl_crl_file = ''            # (change requires restart)
#password_encryption = on
#db_user_namespace = off
#row_security = on

# GSSAPI using Kerberos
#krb_server_keyfile = ''
#krb_caseins_users = off

# - TCP Keepalives -
# see "man 7 tcp" for details

#tcp_keepalives_idle = 0      # TCP_KEEPIDLE, in seconds;
                         # 0 selects the system default
#tcp_keepalives_interval = 0       # TCP_KEEPINTVL, in seconds;
                         # 0 selects the system default
#tcp_keepalives_count = 0          # TCP_KEEPCNT;
                         # 0 selects the system default


#------------------------------------------------------------------------------
# RESOURCE USAGE (except WAL)
#------------------------------------------------------------------------------

# - Memory -

shared_buffers = 128MB             # min 128kB
                         # (change requires restart)
#huge_pages = try             # on, off, or try
                         # (change requires restart)
#temp_buffers = 8MB           # min 800kB
#max_prepared_transactions = 0          # zero disables the feature
                         # (change requires restart)
# Caution: it is not advisable to set max_prepared_transactions nonzero unless
# you actively intend to use prepared transactions.
#work_mem = 4MB                    # min 64kB
#maintenance_work_mem = 64MB       # min 1MB
#replacement_sort_tuples = 150000  # limits use of replacement selection sort
#autovacuum_work_mem = -1          # min 1MB, or -1 to use maintenance_work_mem
#max_stack_depth = 2MB             # min 100kB
dynamic_shared_memory_type = posix # the default is the first option
                         # supported by the operating system:
                         #   posix
                         #   sysv
                         #   windows
                         #   mmap
                         # use none to disable dynamic shared memory

# - Disk -

#temp_file_limit = -1              # limits per-process temp file space
                         # in kB, or -1 for no limit

# - Kernel Resource Usage -

#max_files_per_process = 1000      # min 25
                         # (change requires restart)
#shared_preload_libraries = ''          # (change requires restart)

# - Cost-Based Vacuum Delay -

#vacuum_cost_delay = 0             # 0-100 milliseconds
#vacuum_cost_page_hit = 1          # 0-10000 credits
#vacuum_cost_page_miss = 10        # 0-10000 credits
#vacuum_cost_page_dirty = 20       # 0-10000 credits
#vacuum_cost_limit = 200      # 1-10000 credits

# - Background Writer -

#bgwriter_delay = 200ms            # 10-10000ms between rounds
#bgwriter_lru_maxpages = 100       # 0-1000 max buffers written/round
#bgwriter_lru_multiplier = 2.0          # 0-10.0 multiplier on buffers scanned/round
#bgwriter_flush_after = 0          # 0 disables,
                         # default is 512kB on linux, 0 otherwise

# - Asynchronous Behavior -

#effective_io_concurrency = 1      # 1-1000; 0 disables prefetching
#max_worker_processes = 8          # (change requires restart)
#max_parallel_workers_per_gather = 0    # taken from max_worker_processes
#old_snapshot_threshold = -1       # 1min-60d; -1 disables; 0 is immediate
                                             # (change requires restart)
#backend_flush_after = 0      # 0 disables, default is 0


#------------------------------------------------------------------------------
# WRITE AHEAD LOG
#------------------------------------------------------------------------------

# - Settings -

#wal_level = minimal               # minimal, replica, or logical
                         # (change requires restart)
#fsync = on                   # flush data to disk for crash safety
                              # (turning this off can cause
                              # unrecoverable data corruption)
#synchronous_commit = on      # synchronization level;
                         # off, local, remote_write, remote_apply, or on
#wal_sync_method = fsync      # the default is the first option
                         # supported by the operating system:
                         #   open_datasync
                         #   fdatasync (default on Linux)
                         #   fsync
                         #   fsync_writethrough
                         #   open_sync
#full_page_writes = on             # recover from partial page writes
#wal_compression = off             # enable compression of full-page writes
#wal_log_hints = off               # also do full page writes of non-critical updates
                         # (change requires restart)
#wal_buffers = -1             # min 32kB, -1 sets based on shared_buffers
                         # (change requires restart)
#wal_writer_delay = 200ms          # 1-10000 milliseconds
#wal_writer_flush_after = 1MB      # 0 disables

#commit_delay = 0             # range 0-100000, in microseconds
#commit_siblings = 5               # range 1-1000

# - Checkpoints -

#checkpoint_timeout = 5min         # range 30s-1d
#max_wal_size = 1GB
#min_wal_size = 80MB
#checkpoint_completion_target = 0.5     # checkpoint target duration, 0.0 - 1.0
#checkpoint_flush_after = 0        # 0 disables,
                         # default is 256kB on linux, 0 otherwise
#checkpoint_warning = 30s          # 0 disables

# - Archiving -

#archive_mode = off      # enables archiving; off, on, or always
                    # (change requires restart)
#archive_command = ''         # command to use to archive a logfile segment
                    # placeholders: %p = path of file to archive
                    #               %f = file name only
                    # e.g. 'test ! -f /mnt/server/archivedir/%f && cp %p /mnt/server/archivedir/%f'
#archive_timeout = 0          # force a logfile segment switch after this
                    # number of seconds; 0 disables


#------------------------------------------------------------------------------
# REPLICATION
#------------------------------------------------------------------------------

# - Sending Server(s) -

{%- if cluster.enabled and cluster.get("mode") == "hot_standby" and cluster.role != "master" %}
hot_standby = on
{%- endif %}

{%- if cluster.enabled and cluster.get("mode") == "hot_standby" and cluster.role == "master" %}

wal_level = hot_standby
archive_mode = {{ cluster.archive }}

max_wal_senders = {{ cluster.members|length + 1 }}
max_replication_slots = {{ cluster.members|length + 1 }}

{%- if cluster.synchronous %}
synchronous_standby_names = '*'
{%- endif %}
{%- endif %}

# Set these on the master and on any standby that will send replication data.

#max_wal_senders = 0          # max number of walsender processes
                    # (change requires restart)
#wal_keep_segments = 0        # in logfile segments, 16MB each; 0 disables
#wal_sender_timeout = 60s     # in milliseconds; 0 disables

#max_replication_slots = 0    # max number of replication slots
                    # (change requires restart)
#track_commit_timestamp = off # collect timestamp of transaction commit
                    # (change requires restart)

# - Master Server -

# These settings are ignored on a standby server.

#synchronous_standby_names = ''    # standby servers that provide sync rep
                    # number of sync standbys and comma-separated list of application_name
                    # from standby(s); '*' = all
#vacuum_defer_cleanup_age = 0 # number of xacts by which cleanup is delayed

# - Standby Servers -

# These settings are ignored on a master server.

#hot_standby = off            # "on" allows queries during recovery
                         # (change requires restart)
#max_standby_archive_delay = 30s   # max delay before canceling queries
                         # when reading WAL from archive;
                         # -1 allows indefinite delay
#max_standby_streaming_delay = 30s # max delay before canceling queries
                         # when reading streaming WAL;
                         # -1 allows indefinite delay
#wal_receiver_status_interval = 10s     # send replies at least this often
                         # 0 disables
#hot_standby_feedback = off        # send info from standby to prevent
                         # query conflicts
#wal_receiver_timeout = 60s        # time that receiver waits for
                         # communication from master
                         # in milliseconds; 0 disables
#wal_retrieve_retry_interval = 5s  # time to wait before retrying to
                         # retrieve WAL after a failed attempt


#------------------------------------------------------------------------------
# QUERY TUNING
#------------------------------------------------------------------------------

# - Planner Method Configuration -

#enable_bitmapscan = on
#enable_hashagg = on
#enable_hashjoin = on
#enable_indexscan = on
#enable_indexonlyscan = on
#enable_material = on
#enable_mergejoin = on
#enable_nestloop = on
#enable_seqscan = on
#enable_sort = on
#enable_tidscan = on

# - Planner Cost Constants -

#seq_page_cost = 1.0               # measured on an arbitrary scale
#random_page_cost = 4.0            # same scale as above
#cpu_tuple_cost = 0.01             # same scale as above
#cpu_index_tuple_cost = 0.005      # same scale as above
#cpu_operator_cost = 0.0025        # same scale as above
#parallel_tuple_cost = 0.1         # same scale as above
#parallel_setup_cost = 1000.0 # same scale as above
#min_parallel_relation_size = 8MB
#effective_cache_size = 4GB

# - Genetic Query Optimizer -

#geqo = on
#geqo_threshold = 12
#geqo_effort = 5              # range 1-10
#geqo_pool_size = 0           # selects default based on effort
#geqo_generations = 0              # selects default based on effort
#geqo_selection_bias = 2.0         # range 1.5-2.0
#geqo_seed = 0.0              # range 0.0-1.0

# - Other Planner Options -

#default_statistics_target = 100   # range 1-10000
#constraint_exclusion = partition  # on, off, or partition
#cursor_tuple_fraction = 0.1       # range 0.0-1.0
#from_collapse_limit = 8
#join_collapse_limit = 8      # 1 disables collapsing of explicit
                         # JOIN clauses
#force_parallel_mode = off


#------------------------------------------------------------------------------
# ERROR REPORTING AND LOGGING
#------------------------------------------------------------------------------

# - Where to Log -

#log_destination = 'stderr'        # Valid values are combinations of
                         # stderr, csvlog, syslog, and eventlog,
                         # depending on platform.  csvlog
                         # requires logging_collector to be on.

# This is used when logging to stderr:
#logging_collector = off      # Enable capturing of stderr and csvlog
                         # into log files. Required to be on for
                         # csvlogs.
                         # (change requires restart)

# These are only used if logging_collector is on:
#log_directory = 'pg_log'          # directory where log files are written,
                         # can be absolute or relative to PGDATA
#log_filename = 'postgresql-%Y-%m-%d_%H%M%S.log'  # log file name pattern,
                         # can include strftime() escapes
#log_file_mode = 0600              # creation mode for log files,
                         # begin with 0 to use octal notation
#log_truncate_on_rotation = off         # If on, an existing log file with the
                         # same name as the new log file will be
                         # truncated rather than appended to.
                         # But such truncation only occurs on
                         # time-driven rotation, not on restarts
                         # or size-driven rotation.  Default is
                         # off, meaning append to existing files
                         # in all cases.
#log_rotation_age = 1d             # Automatic rotation of logfiles will
                         # happen after that time.  0 disables.
#log_rotation_size = 10MB          # Automatic rotation of logfiles will
                         # happen after that much log output.
                         # 0 disables.

# These are relevant when logging to syslog:
#syslog_facility = 'LOCAL0'
#syslog_ident = 'postgres'
#syslog_sequence_numbers = on
#syslog_split_messages = on

# This is only relevant when logging to eventlog (win32):
#event_source = 'PostgreSQL'

# - When to Log -

#client_min_messages = notice      # values in order of decreasing detail:
                         #   debug5
                         #   debug4
                         #   debug3
                         #   debug2
                         #   debug1
                         #   log
                         #   notice
                         #   warning
                         #   error

#log_min_messages = warning        # values in order of decreasing detail:
                         #   debug5
                         #   debug4
                         #   debug3
                         #   debug2
                         #   debug1
                         #   info
                         #   notice
                         #   warning
                         #   error
                         #   log
                         #   fatal
                         #   panic

#log_min_error_statement = error   # values in order of decreasing detail:
                         #   debug5
                         #   debug4
                         #   debug3
                         #   debug2
                         #   debug1
                         #   info
                         #   notice
                         #   warning
                         #   error
                         #   log
                         #   fatal
                         #   panic (effectively off)

#log_min_duration_statement = -1   # -1 is disabled, 0 logs all statements
                         # and their durations, > 0 logs only
                         # statements running at least this number
                         # of milliseconds


# - What to Log -

#debug_print_parse = off
#debug_print_rewritten = off
#debug_print_plan = off
#debug_pretty_print = on
#log_checkpoints = off
#log_connections = off
#log_disconnections = off
#log_duration = off
#log_error_verbosity = default          # terse, default, or verbose messages
#log_hostname = off
log_line_prefix = '%t [%p-%l] %q%u@%d '           # special values:
                         #   %a = application name
                         #   %u = user name
                         #   %d = database name
                         #   %r = remote host and port
                         #   %h = remote host
                         #   %p = process ID
                         #   %t = timestamp without milliseconds
                         #   %m = timestamp with milliseconds
                         #   %n = timestamp with milliseconds (as a Unix epoch)
                         #   %i = command tag
                         #   %e = SQL state
                         #   %c = session ID
                         #   %l = session line number
                         #   %s = session start timestamp
                         #   %v = virtual transaction ID
                         #   %x = transaction ID (0 if none)
                         #   %q = stop here in non-session
                         #        processes
                         #   %% = '%'
                         # e.g. '<%u%%%d> '
#log_lock_waits = off              # log lock waits >= deadlock_timeout
#log_statement = 'none'            # none, ddl, mod, all
#log_replication_commands = off
#log_temp_files = -1               # log temporary files equal or larger
                         # than the specified size in kilobytes;
                         # -1 disables, 0 logs all temp files
log_timezone = 'localtime'


# - Process Title -

#cluster_name = ''            # added to process titles if nonempty
                         # (change requires restart)
#update_process_title = on


#------------------------------------------------------------------------------
# RUNTIME STATISTICS
#------------------------------------------------------------------------------

# - Query/Index Statistics Collector -

#track_activities = on
#track_counts = on
#track_io_timing = off
#track_functions = none            # none, pl, all
#track_activity_query_size = 1024  # (change requires restart)
stats_temp_directory = '/var/run/postgresql/9.6-main.pg_stat_tmp'


# - Statistics Monitoring -

#log_parser_stats = off
#log_planner_stats = off
#log_executor_stats = off
#log_statement_stats = off


#------------------------------------------------------------------------------
# AUTOVACUUM PARAMETERS
#------------------------------------------------------------------------------

#autovacuum = on              # Enable autovacuum subprocess?  'on'
                         # requires track_counts to also be on.
#log_autovacuum_min_duration = -1  # -1 disables, 0 logs all actions and
                         # their durations, > 0 logs only
                         # actions running at least this number
                         # of milliseconds.
#autovacuum_max_workers = 3        # max number of autovacuum subprocesses
                         # (change requires restart)
#autovacuum_naptime = 1min         # time between autovacuum runs
#autovacuum_vacuum_threshold = 50  # min number of row updates before
                         # vacuum
#autovacuum_analyze_threshold = 50 # min number of row updates before
                         # analyze
#autovacuum_vacuum_scale_factor = 0.2   # fraction of table size before vacuum
#autovacuum_analyze_scale_factor = 0.1  # fraction of table size before analyze
#autovacuum_freeze_max_age = 200000000  # maximum XID age before forced vacuum
                         # (change requires restart)
#autovacuum_multixact_freeze_max_age = 400000000  # maximum multixact age
                         # before forced vacuum
                         # (change requires restart)
#autovacuum_vacuum_cost_delay = 20ms    # default vacuum cost delay for
                         # autovacuum, in milliseconds;
                         # -1 means use vacuum_cost_delay
#autovacuum_vacuum_cost_limit = -1 # default vacuum cost limit for
                         # autovacuum, -1 means use
                         # vacuum_cost_limit


#------------------------------------------------------------------------------
# CLIENT CONNECTION DEFAULTS
#------------------------------------------------------------------------------

# - Statement Behavior -

#search_path = '"$user", public'   # schema names
#default_tablespace = ''      # a tablespace name, '' uses the default
#temp_tablespaces = ''             # a list of tablespace names, '' uses
                         # only default tablespace
#check_function_bodies = on
#default_transaction_isolation = 'read committed'
#default_transaction_read_only = off
#default_transaction_deferrable = off
#session_replication_role = 'origin'
#statement_timeout = 0             # in milliseconds, 0 is disabled
#lock_timeout = 0             # in milliseconds, 0 is disabled
#idle_in_transaction_session_timeout = 0          # in milliseconds, 0 is disabled
#vacuum_freeze_min_age = 50000000
#vacuum_freeze_table_age = 150000000
#vacuum_multixact_freeze_min_age = 5000000
#vacuum_multixact_freeze_table_age = 150000000
#bytea_output = 'hex'              # hex, escape
#xmlbinary = 'base64'
#xmloption = 'content'
#gin_fuzzy_search_limit = 0
#gin_pending_list_limit = 4MB

# - Locale and Formatting -

datestyle = 'iso, mdy'
#intervalstyle = 'postgres'
timezone = 'localtime'
#timezone_abbreviations = 'Default'     # Select the set of available time zone
                         # abbreviations.  Currently, there are
                         #   Default
                         #   Australia (historical usage)
                         #   India
                         # You can create your own file in
                         # share/timezonesets/.
#extra_float_digits = 0            # min -15, max 3
#client_encoding = sql_ascii       # actually, defaults to database
                         # encoding

# These settings are initialized by initdb, but they can be changed.
lc_messages = 'en_US.UTF-8'             # locale for system error message
                         # strings
lc_monetary = 'en_US.UTF-8'             # locale for monetary formatting
lc_numeric = 'en_US.UTF-8'              # locale for number formatting
lc_time = 'en_US.UTF-8'                 # locale for time formatting

# default configuration for text search
default_text_search_config = 'pg_catalog.english'

# - Other Defaults -

#dynamic_library_path = '$libdir'
#local_preload_libraries = ''
#session_preload_libraries = ''


#------------------------------------------------------------------------------
# LOCK MANAGEMENT
#------------------------------------------------------------------------------

#deadlock_timeout = 1s
#max_locks_per_transaction = 64         # min 10
                         # (change requires restart)
#max_pred_locks_per_transaction = 64    # min 10
                         # (change requires restart)


#------------------------------------------------------------------------------
# VERSION/PLATFORM COMPATIBILITY
#------------------------------------------------------------------------------

# - Previous PostgreSQL Versions -

#array_nulls = on
#backslash_quote = safe_encoding   # on, off, or safe_encoding
#default_with_oids = off
#escape_string_warning = on
#lo_compat_privileges = off
#operator_precedence_warning = off
#quote_all_identifiers = off
#sql_inheritance = on
#standard_conforming_strings = on
#synchronize_seqscans = on

# - Other Platforms and Clients -

#transform_null_equals = off


#------------------------------------------------------------------------------
# ERROR HANDLING
#------------------------------------------------------------------------------

#exit_on_error = off               # terminate session on any error?
#restart_after_crash = on          # reinitialize after backend crash?


#------------------------------------------------------------------------------
# CONFIG FILE INCLUDES
#------------------------------------------------------------------------------

# These options allow settings to be loaded from files other than the
# default postgresql.conf.

#include_dir = 'conf.d'            # include files ending in '.conf' from
                         # directory 'conf.d'
#include_if_exists = 'exists.conf' # include file only if it exists
#include = 'special.conf'          # include file


#------------------------------------------------------------------------------
# CUSTOMIZED OPTIONS
#------------------------------------------------------------------------------

# Add settings for extensions here