diff --git a/CHANGELOG.rst b/CHANGELOG.rst
new file mode 100644
index 0000000..9e87f09
--- /dev/null
+++ b/CHANGELOG.rst
@@ -0,0 +1,7 @@
+
+postgresql-formula
+==================
+
+0.0.1 (2015-08-03)
+
+- Initial formula setup
\ No newline at end of file
diff --git a/LICENSE b/LICENSE
new file mode 100644
index 0000000..8e80b12
--- /dev/null
+++ b/LICENSE
@@ -0,0 +1,13 @@
+Copyright (c) 2014-2015 tcp cloud a. s.
+
+Licensed under the Apache License, Version 2.0 (the "License");
+you may not use this file except in compliance with the License.
+You may obtain a copy of the License at
+
+   http://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing, software
+distributed under the License is distributed on an "AS IS" BASIS,
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+See the License for the specific language governing permissions and
+limitations under the License.
\ No newline at end of file
diff --git a/README.rst b/README.rst
new file mode 100755
index 0000000..9ba2473
--- /dev/null
+++ b/README.rst
@@ -0,0 +1,150 @@
+
+==========
+PostgreSQL
+==========
+
+PostgreSQL, often simply Postgres, is an object-relational database management system available for many platforms including Linux, FreeBSD, Solaris, Microsoft Windows and Mac OS X. It is released under the PostgreSQL License, which is an MIT-style license, and is thus free and open source software. PostgreSQL is developed by the PostgreSQL Global Development Group, consisting of a handful of volunteers employed and supervised by companies such as Red Hat and EnterpriseDB.
+
+Support
+=======
+
+* required by: [redmine](../master/redmine)
+* service versions: 9.1
+* operating systems: Ubuntu 12.04
+
+Sample pillars
+==============
+
+Single database server with empty database
+------------------------------------------
+
+.. code-block:: yaml
+
+    postgresql:
+      server:
+        enabled: true
+        version: 9.1
+        bind:
+          address: 127.0.0.1
+          port: 5432
+          protocol: tcp
+        clients:
+        - 127.0.0.1
+        database:
+          name: 'databasename'
+          encoding: 'UTF8'
+          locale: 'cs_CZ'
+          user:
+            name: 'username'
+            password: 'password'
+            host: 'localhost'
+            rights: 'all privileges'
+
+Single database server with prepopulated database
+-------------------------------------------------
+
+.. code-block:: yaml
+
+    postgresql:
+      server:
+        enabled: true
+        version: 9.1
+        bind:
+        - address: 127.0.0.1
+          port: 5432
+          protocol: tcp
+        clients:
+        - 127.0.0.1
+        database:
+          name: 'databasename'
+          encoding: 'UTF8'
+          locale: 'cs_CZ'
+          initial_data:
+            engine: backupninja
+            source: backup.host
+            host: original-host-name
+            database: original-database-name
+          user:
+            name: 'username'
+            password: 'password'
+            host: 'localhost'
+            rights: 'all privileges'
+
+User with createdb privileges
+-----------------------------
+
+.. code-block:: yaml
+
+    postgresql:
+      server:
+        enabled: true
+        version: 9.1
+        bind:
+          address: 127.0.0.1
+          port: 5432
+          protocol: tcp
+        clients:
+        - 127.0.0.1
+        database:
+          name: 'databasename'
+          encoding: 'UTF8'
+          locale: 'cs_CZ'
+          user:
+            name: 'username'
+            password: 'password'
+            host: 'localhost'
+            createdb: true
+            rights: 'all privileges'
+
+
+PostgreSQL extensions
+---------------------
+
+.. code-block:: yaml
+
+    postgresql:
+      server:
+        enabled: true
+        version: 9.1
+        bind:
+          address: 127.0.0.1
+          port: 5432
+          protocol: tcp
+        clients:
+        - 127.0.0.1
+        database:
+          name: 'databasename'
+          encoding: 'UTF8'
+          locale: 'cs_CZ'
+          user:
+            name: 'username'
+            password: 'password'
+            host: 'localhost'
+            createdb: true
+            rights: 'all privileges'
+          extension:
+            postgis_topology:
+            fuzzystrmatch:
+            postgis_tiger_geocoder:
+            postgis:
+
+## Sample usage
+
+Init database cluster with given locale
+
+    sudo su - postgres -c "/usr/lib/postgresql/9.3/bin/initdb /var/lib/postgresql/9.3/main --locale=C"
+
+Convert PostgreSQL cluster from 9.1 to 9.3
+
+    sudo su - postgres -c '/usr/lib/postgresql/9.3/bin/pg_upgrade -b /usr/lib/postgresql/9.1/bin -B /usr/lib/postgresql/9.3/bin -d /var/lib/postgresql/9.1/main/ -D /var/lib/postgresql/9.3/main/ -O "-c config_file=/etc/postgresql/9.3/main/postgresql.conf" -o "-c config_file=/etc/postgresql/9.1/main/postgresql.conf"'
+
+Ubuntu on 14.04 on some machines won't create default cluster
+
+    sudo pg_createcluster 9.3 main --start
+
+## Read more
+
+* http://www.postgresql.org/
+* http://www.postgresql.org/docs/9.1/interactive/index.html
+* http://momjian.us/main/writings/pgsql/hw_performance/
+* https://gist.github.com/ibussieres/11262268 - upgrade instructions for ubuntu
\ No newline at end of file
diff --git a/VERSION b/VERSION
new file mode 100644
index 0000000..3b04cfb
--- /dev/null
+++ b/VERSION
@@ -0,0 +1 @@
+0.2
diff --git a/debian/changelog b/debian/changelog
new file mode 100644
index 0000000..3e20e14
--- /dev/null
+++ b/debian/changelog
@@ -0,0 +1,11 @@
+salt-formula-postgresql (0.2) trusty; urgency=medium
+
+  * First public release
+
+ -- Filip Pytloun <filip.pytloun@tcpcloud.eu>  Tue, 06 Oct 2015 16:38:51 +0200
+
+salt-formula-postgresql (0.1) trusty; urgency=medium
+
+  * Initial release
+
+ -- Ales Komarek <ales.komarek@tcpcloud.eu>  Thu, 13 Aug 2015 23:23:41 +0200
diff --git a/debian/compat b/debian/compat
new file mode 100644
index 0000000..ec63514
--- /dev/null
+++ b/debian/compat
@@ -0,0 +1 @@
+9
diff --git a/debian/control b/debian/control
new file mode 100644
index 0000000..cbdcb31
--- /dev/null
+++ b/debian/control
@@ -0,0 +1,15 @@
+Source: salt-formula-postgresql
+Maintainer: Ales Komarek <ales.komarek@tcpcloud.eu>
+Section: admin
+Priority: optional
+Build-Depends: debhelper (>= 9)
+Standards-Version: 3.9.6
+Homepage: http://www.tcpcloud.eu
+Vcs-Browser: https://github.com/tcpcloud/salt-formula-postgresql
+Vcs-Git: https://github.com/tcpcloud/salt-formula-postgresql.git
+
+Package: salt-formula-postgresql
+Architecture: all
+Depends: ${misc:Depends}, salt-master, reclass
+Description: PostgreSQL salt formula
+ Install and configure PostgreSQL database.
diff --git a/debian/copyright b/debian/copyright
new file mode 100644
index 0000000..99d49b8
--- /dev/null
+++ b/debian/copyright
@@ -0,0 +1,15 @@
+Format: http://www.debian.org/doc/packaging-manuals/copyright-format/1.0/
+Upstream-Name: salt-formula-postgresql
+Upstream-Contact: Ales Komarek <ales.komarek@tcpcloud.eu>
+Source: https://github.com/tcpcloud/salt-formula-postgresql
+
+Files: *
+Copyright: 2014-2015 tcp cloud a.s.
+License: Apache-2.0
+  Copyright (C) 2014-2015 tcp cloud a.s.
+  .
+  Licensed under the Apache License, Version 2.0 (the "License");
+  you may not use this file except in compliance with the License.
+  .
+  On a Debian system you can find a copy of this license in
+  /usr/share/common-licenses/Apache-2.0.
diff --git a/debian/docs b/debian/docs
new file mode 100644
index 0000000..d585829
--- /dev/null
+++ b/debian/docs
@@ -0,0 +1,3 @@
+README.rst
+CHANGELOG.rst
+VERSION
diff --git a/debian/install b/debian/install
new file mode 100644
index 0000000..74b97f9
--- /dev/null
+++ b/debian/install
@@ -0,0 +1,2 @@
+postgresql/*             /usr/share/salt-formulas/env/postgresql/
+metadata/service/*      /usr/share/salt-formulas/reclass/service/postgresql/
diff --git a/debian/lintian-overrides b/debian/lintian-overrides
new file mode 100644
index 0000000..479f5f6
--- /dev/null
+++ b/debian/lintian-overrides
@@ -0,0 +1 @@
+salt-formula-postgresql binary: shell-script-fails-syntax-check usr/share/salt-formulas/env/postgresql/files/restore.sh
diff --git a/debian/rules b/debian/rules
new file mode 100755
index 0000000..abde6ef
--- /dev/null
+++ b/debian/rules
@@ -0,0 +1,5 @@
+#!/usr/bin/make -f
+
+%:
+	dh $@
+
diff --git a/debian/source/format b/debian/source/format
new file mode 100644
index 0000000..89ae9db
--- /dev/null
+++ b/debian/source/format
@@ -0,0 +1 @@
+3.0 (native)
diff --git a/metadata/service/server/local.yml b/metadata/service/server/local.yml
new file mode 100644
index 0000000..24b57f5
--- /dev/null
+++ b/metadata/service/server/local.yml
@@ -0,0 +1,12 @@
+applications:
+- postgresql
+parameters:
+  postgresql:
+    server:
+      enabled: true
+      bind:
+        address: '127.0.0.1'
+        port: 5432
+        protocol: tcp
+      clients:
+      - '127.0.0.1'
diff --git a/metadata/service/server/single.yml b/metadata/service/server/single.yml
new file mode 100644
index 0000000..5434790
--- /dev/null
+++ b/metadata/service/server/single.yml
@@ -0,0 +1,10 @@
+applications:
+- postgresql
+parameters:
+  postgresql:
+    server:
+      enabled: true
+      bind:
+        address: '0.0.0.0'
+        port: 5432
+        protocol: tcp
diff --git a/postgresql/files/8.4/postgresql.conf b/postgresql/files/8.4/postgresql.conf
new file mode 100644
index 0000000..a8b92f7
--- /dev/null
+++ b/postgresql/files/8.4/postgresql.conf
@@ -0,0 +1,563 @@
+{%- from "postgresql/map.jinja" import server with context %}
+# -----------------------------
+# PostgreSQL configuration file
+# -----------------------------
+#
+# This file consists of lines of the form:
+#
+#   name = value
+#
+# (The "=" is optional.)  Whitespace may be used.  Comments are introduced with
+# "#" anywhere on a line.  The complete list of parameter names and allowed
+# values can be found in the PostgreSQL documentation.
+#
+# The commented-out settings shown in this file represent the default values.
+# Re-commenting a setting is NOT sufficient to revert it to the default value;
+# you need to reload the server.
+#
+# This file is read on server startup and when the server receives a SIGHUP
+# signal.  If you edit the file on a running system, you have to SIGHUP the
+# server for the changes to take effect, or use "pg_ctl reload".  Some
+# parameters, which are marked below, require a server shutdown and restart to
+# take effect.
+#
+# Any parameter can also be given as a command-line option to the server, e.g.,
+# "postgres -c log_connections=on".  Some parameters can be changed at run time
+# with the "SET" SQL command.
+#
+# Memory units:  kB = kilobytes        Time units:  ms  = milliseconds
+#                MB = megabytes                     s   = seconds
+#                GB = gigabytes                     min = minutes
+#                                                   h   = hours
+#                                                   d   = days
+
+
+#------------------------------------------------------------------------------
+# FILE LOCATIONS
+#------------------------------------------------------------------------------
+
+# The default values of these variables are driven from the -D command-line
+# option or PGDATA environment variable, represented here as ConfigDir.
+
+data_directory = '/var/lib/postgresql/8.4/main'		# use data in another directory
+					# (change requires restart)
+hba_file = '/etc/postgresql/8.4/main/pg_hba.conf'	# host-based authentication file
+					# (change requires restart)
+ident_file = '/etc/postgresql/8.4/main/pg_ident.conf'	# ident configuration file
+					# (change requires restart)
+
+# If external_pid_file is not explicitly set, no extra PID file is written.
+external_pid_file = '/var/run/postgresql/8.4-main.pid'		# write an extra PID file
+					# (change requires restart)
+
+
+#------------------------------------------------------------------------------
+# CONNECTIONS AND AUTHENTICATION
+#------------------------------------------------------------------------------
+
+# - Connection Settings -
+{%- if server.bind.address == '0.0.0.0' %}
+listen_addresses = '*'
+{%- else %}
+listen_addresses = 'localhost'{% if server.bind.address != '127.0.0.1' %}, '{{ bind.address }}'{% endif %}
+{%- endif %}
+port = {{ server.bind.get('port', '5432') }}
+max_connections = 100
+# (change requires restart)
+# Note:  Increasing max_connections costs ~400 bytes of shared memory per
+# connection slot, plus lock space (see max_locks_per_transaction).
+#superuser_reserved_connections = 3	# (change requires restart)
+unix_socket_directory = '/var/run/postgresql'
+# (change requires restart)
+#unix_socket_group = ''
+# (change requires restart)
+#unix_socket_permissions = 0777		
+# begin with 0 to use octal notation
+# (change requires restart)
+#bonjour = off				
+# advertise server via Bonjour
+# (change requires restart)
+#bonjour_name = ''			
+# defaults to the computer name
+# (change requires restart)
+
+# - Security and Authentication -
+
+#authentication_timeout = 1min		# 1s-600s
+ssl = true				# (change requires restart)
+#ssl_ciphers = 'ALL:!ADH:!LOW:!EXP:!MD5:@STRENGTH'	# allowed SSL ciphers
+					# (change requires restart)
+#ssl_renegotiation_limit = 512MB	# amount of data between renegotiations
+#password_encryption = on
+#db_user_namespace = off
+
+# Kerberos and GSSAPI
+#krb_server_keyfile = ''
+#krb_srvname = 'postgres'		# (Kerberos only)
+#krb_caseins_users = off
+
+# - TCP Keepalives -
+# see "man 7 tcp" for details
+
+#tcp_keepalives_idle = 0		# TCP_KEEPIDLE, in seconds;
+					# 0 selects the system default
+#tcp_keepalives_interval = 0		# TCP_KEEPINTVL, in seconds;
+					# 0 selects the system default
+#tcp_keepalives_count = 0		# TCP_KEEPCNT;
+					# 0 selects the system default
+
+
+#------------------------------------------------------------------------------
+# RESOURCE USAGE (except WAL)
+#------------------------------------------------------------------------------
+
+# - Memory -
+
+shared_buffers = 24MB			# min 128kB
+					# (change requires restart)
+#temp_buffers = 8MB			# min 800kB
+#max_prepared_transactions = 0		# zero disables the feature
+					# (change requires restart)
+# Note:  Increasing max_prepared_transactions costs ~600 bytes of shared memory
+# per transaction slot, plus lock space (see max_locks_per_transaction).
+# It is not advisable to set max_prepared_transactions nonzero unless you
+# actively intend to use prepared transactions.
+#work_mem = 1MB				# min 64kB
+#maintenance_work_mem = 16MB		# min 1MB
+#max_stack_depth = 2MB			# min 100kB
+
+# - Kernel Resource Usage -
+
+#max_files_per_process = 1000		# min 25
+					# (change requires restart)
+#shared_preload_libraries = ''		# (change requires restart)
+
+# - Cost-Based Vacuum Delay -
+
+#vacuum_cost_delay = 0ms		# 0-100 milliseconds
+#vacuum_cost_page_hit = 1		# 0-10000 credits
+#vacuum_cost_page_miss = 10		# 0-10000 credits
+#vacuum_cost_page_dirty = 20		# 0-10000 credits
+#vacuum_cost_limit = 200		# 1-10000 credits
+
+# - Background Writer -
+
+#bgwriter_delay = 200ms			# 10-10000ms between rounds
+#bgwriter_lru_maxpages = 100		# 0-1000 max buffers written/round
+#bgwriter_lru_multiplier = 2.0		# 0-10.0 multipler on buffers scanned/round
+
+# - Asynchronous Behavior -
+
+#effective_io_concurrency = 1		# 1-1000. 0 disables prefetching
+
+
+#------------------------------------------------------------------------------
+# WRITE AHEAD LOG
+#------------------------------------------------------------------------------
+
+# - Settings -
+
+#wal_level = minimal			# minimal, archive, or hot_standby
+					# (change requires restart)
+#fsync = on				# turns forced synchronization on or off
+#synchronous_commit = on		# synchronization level; on, off, or local
+#wal_sync_method = fsync		# the default is the first option
+# supported by the operating system:
+#   open_datasync
+#   fdatasync (default on Linux)
+#   fsync
+#   fsync_writethrough
+#   open_sync
+#full_page_writes = on			# recover from partial page writes
+#wal_buffers = -1			# min 32kB, -1 sets based on shared_buffers
+					# (change requires restart)
+#wal_writer_delay = 200ms		# 1-10000 milliseconds
+
+#commit_delay = 0			# range 0-100000, in microseconds
+#commit_siblings = 5			# range 1-1000
+
+# - Checkpoints -
+
+#checkpoint_segments = 3		# in logfile segments, min 1, 16MB each
+#checkpoint_timeout = 5min		# range 30s-1h
+#checkpoint_completion_target = 0.5	# checkpoint target duration, 0.0 - 1.0
+#checkpoint_warning = 30s		# 0 disables
+
+# - Archiving -
+
+#archive_mode = off		# allows archiving to be done
+				# (change requires restart)
+#archive_command = ''		# command to use to archive a logfile segment
+#archive_timeout = 0		# force a logfile segment switch after this
+				# number of seconds; 0 disables
+
+
+#------------------------------------------------------------------------------
+# REPLICATION
+#------------------------------------------------------------------------------
+
+# - Master Server -
+
+# These settings are ignored on a standby server
+
+#max_wal_senders = 0		# max number of walsender processes
+				# (change requires restart)
+#wal_sender_delay = 1s		# walsender cycle time, 1-10000 milliseconds
+#wal_keep_segments = 0		# in logfile segments, 16MB each; 0 disables
+#vacuum_defer_cleanup_age = 0	# number of xacts by which cleanup is delayed
+#replication_timeout = 60s	# in milliseconds; 0 disables
+#synchronous_standby_names = ''	# standby servers that provide sync rep
+				# comma-separated list of application_name
+				# from standby(s); '*' = all
+
+# - Standby Servers -
+
+# These settings are ignored on a master server
+
+#hot_standby = off			# "on" allows queries during recovery
+					# (change requires restart)
+#max_standby_archive_delay = 30s	# max delay before canceling queries
+					# when reading WAL from archive;
+					# -1 allows indefinite delay
+#max_standby_streaming_delay = 30s	# max delay before canceling queries
+					# when reading streaming WAL;
+					# -1 allows indefinite delay
+#wal_receiver_status_interval = 10s	# send replies at least this often
+					# 0 disables
+#hot_standby_feedback = off		# send info from standby to prevent
+					# query conflicts
+
+
+#------------------------------------------------------------------------------
+# QUERY TUNING
+#------------------------------------------------------------------------------
+
+# - Planner Method Configuration -
+
+#enable_bitmapscan = on
+#enable_hashagg = on
+#enable_hashjoin = on
+#enable_indexscan = on
+#enable_material = on
+#enable_mergejoin = on
+#enable_nestloop = on
+#enable_seqscan = on
+#enable_sort = on
+#enable_tidscan = on
+
+# - Planner Cost Constants -
+
+#seq_page_cost = 1.0			# measured on an arbitrary scale
+#random_page_cost = 4.0			# same scale as above
+#cpu_tuple_cost = 0.01			# same scale as above
+#cpu_index_tuple_cost = 0.005		# same scale as above
+#cpu_operator_cost = 0.0025		# same scale as above
+#effective_cache_size = 128MB
+
+# - Genetic Query Optimizer -
+
+#geqo = on
+#geqo_threshold = 12
+#geqo_effort = 5			# range 1-10
+#geqo_pool_size = 0			# selects default based on effort
+#geqo_generations = 0			# selects default based on effort
+#geqo_selection_bias = 2.0		# range 1.5-2.0
+#geqo_seed = 0.0			# range 0.0-1.0
+
+# - Other Planner Options -
+
+#default_statistics_target = 100	# range 1-10000
+#constraint_exclusion = partition	# on, off, or partition
+#cursor_tuple_fraction = 0.1		# range 0.0-1.0
+#from_collapse_limit = 8
+#join_collapse_limit = 8		# 1 disables collapsing of explicit
+					# JOIN clauses
+
+
+#------------------------------------------------------------------------------
+# ERROR REPORTING AND LOGGING
+#------------------------------------------------------------------------------
+
+# - Where to Log -
+
+#log_destination = 'stderr'		# Valid values are combinations of
+					# stderr, csvlog, syslog, and eventlog,
+					# depending on platform.  csvlog
+					# requires logging_collector to be on.
+
+# This is used when logging to stderr:
+#logging_collector = off		# Enable capturing of stderr and csvlog
+					# into log files. Required to be on for
+					# csvlogs.
+					# (change requires restart)
+
+# These are only used if logging_collector is on:
+#log_directory = 'pg_log'		# directory where log files are written,
+					# can be absolute or relative to PGDATA
+#log_filename = 'postgresql-%Y-%m-%d_%H%M%S.log'	# log file name pattern,
+					# can include strftime() escapes
+#log_file_mode = 0600			# creation mode for log files,
+					# begin with 0 to use octal notation
+#log_truncate_on_rotation = off		# If on, an existing log file with the
+					# same name as the new log file will be
+					# truncated rather than appended to.
+					# But such truncation only occurs on
+					# time-driven rotation, not on restarts
+					# or size-driven rotation.  Default is
+					# off, meaning append to existing files
+					# in all cases.
+#log_rotation_age = 1d			# Automatic rotation of logfiles will
+					# happen after that time.  0 disables.
+#log_rotation_size = 10MB		# Automatic rotation of logfiles will
+					# happen after that much log output.
+					# 0 disables.
+
+# These are relevant when logging to syslog:
+#syslog_facility = 'LOCAL0'
+#syslog_ident = 'postgres'
+
+#silent_mode = off			# Run server silently.
+					# DO NOT USE without syslog or
+					# logging_collector
+					# (change requires restart)
+
+
+# - When to Log -
+
+#client_min_messages = notice		# values in order of decreasing detail:
+					#   debug5
+					#   debug4
+					#   debug3
+					#   debug2
+					#   debug1
+					#   log
+					#   notice
+					#   warning
+					#   error
+
+#log_min_messages = warning		# values in order of decreasing detail:
+					#   debug5
+					#   debug4
+					#   debug3
+					#   debug2
+					#   debug1
+					#   info
+					#   notice
+					#   warning
+					#   error
+					#   log
+					#   fatal
+					#   panic
+
+#log_min_error_statement = error	# values in order of decreasing detail:
+				 	#   debug5
+					#   debug4
+					#   debug3
+					#   debug2
+					#   debug1
+				 	#   info
+					#   notice
+					#   warning
+					#   error
+					#   log
+					#   fatal
+					#   panic (effectively off)
+
+#log_min_duration_statement = -1	# -1 is disabled, 0 logs all statements
+					# and their durations, > 0 logs only
+					# statements running at least this number
+					# of milliseconds
+
+
+# - What to Log -
+
+#debug_print_parse = off
+#debug_print_rewritten = off
+#debug_print_plan = off
+#debug_pretty_print = on
+#log_checkpoints = off
+#log_connections = off
+#log_disconnections = off
+#log_duration = off
+#log_error_verbosity = default		# terse, default, or verbose messages
+#log_hostname = off
+log_line_prefix = '%t '			# special values:
+					#   %a = application name
+					#   %u = user name
+					#   %d = database name
+					#   %r = remote host and port
+					#   %h = remote host
+					#   %p = process ID
+					#   %t = timestamp without milliseconds
+					#   %m = timestamp with milliseconds
+					#   %i = command tag
+					#   %e = SQL state
+					#   %c = session ID
+					#   %l = session line number
+					#   %s = session start timestamp
+					#   %v = virtual transaction ID
+					#   %x = transaction ID (0 if none)
+					#   %q = stop here in non-session
+					#        processes
+					#   %% = '%'
+					# e.g. '<%u%%%d> '
+#log_lock_waits = off			# log lock waits >= deadlock_timeout
+#log_statement = 'none'			# none, ddl, mod, all
+#log_temp_files = -1			# log temporary files equal or larger
+					# than the specified size in kilobytes;
+					# -1 disables, 0 logs all temp files
+#log_timezone = '(defaults to server environment setting)'
+
+
+#------------------------------------------------------------------------------
+# RUNTIME STATISTICS
+#------------------------------------------------------------------------------
+
+# - Query/Index Statistics Collector -
+
+#track_activities = on
+#track_counts = on
+#track_functions = none			# none, pl, all
+#track_activity_query_size = 1024 	# (change requires restart)
+#update_process_title = on
+#stats_temp_directory = 'pg_stat_tmp'
+
+
+# - Statistics Monitoring -
+
+#log_parser_stats = off
+#log_planner_stats = off
+#log_executor_stats = off
+#log_statement_stats = off
+
+
+#------------------------------------------------------------------------------
+# AUTOVACUUM PARAMETERS
+#------------------------------------------------------------------------------
+
+#autovacuum = on			# Enable autovacuum subprocess?  'on'
+					# requires track_counts to also be on.
+#log_autovacuum_min_duration = -1	# -1 disables, 0 logs all actions and
+					# their durations, > 0 logs only
+					# actions running at least this number
+					# of milliseconds.
+#autovacuum_max_workers = 3		# max number of autovacuum subprocesses
+					# (change requires restart)
+#autovacuum_naptime = 1min		# time between autovacuum runs
+#autovacuum_vacuum_threshold = 50	# min number of row updates before
+					# vacuum
+#autovacuum_analyze_threshold = 50	# min number of row updates before
+					# analyze
+#autovacuum_vacuum_scale_factor = 0.2	# fraction of table size before vacuum
+#autovacuum_analyze_scale_factor = 0.1	# fraction of table size before analyze
+#autovacuum_freeze_max_age = 200000000	# maximum XID age before forced vacuum
+					# (change requires restart)
+#autovacuum_vacuum_cost_delay = 20ms	# default vacuum cost delay for
+					# autovacuum, in milliseconds;
+					# -1 means use vacuum_cost_delay
+#autovacuum_vacuum_cost_limit = -1	# default vacuum cost limit for
+					# autovacuum, -1 means use
+					# vacuum_cost_limit
+
+
+#------------------------------------------------------------------------------
+# CLIENT CONNECTION DEFAULTS
+#------------------------------------------------------------------------------
+
+# - Statement Behavior -
+
+#search_path = '"$user",public'		# schema names
+#default_tablespace = ''		# a tablespace name, '' uses the default
+#temp_tablespaces = ''			# a list of tablespace names, '' uses
+					# only default tablespace
+#check_function_bodies = on
+#default_transaction_isolation = 'read committed'
+#default_transaction_read_only = off
+#default_transaction_deferrable = off
+#session_replication_role = 'origin'
+#statement_timeout = 0			# in milliseconds, 0 is disabled
+#vacuum_freeze_min_age = 50000000
+#vacuum_freeze_table_age = 150000000
+#bytea_output = 'hex'			# hex, escape
+#xmlbinary = 'base64'
+#xmloption = 'content'
+
+# - Locale and Formatting -
+
+datestyle = 'iso, mdy'
+#intervalstyle = 'postgres'
+#timezone = '(defaults to server environment setting)'
+#timezone_abbreviations = 'Default'     # Select the set of available time zone
+					# abbreviations.  Currently, there are
+					#   Default
+					#   Australia
+					#   India
+					# You can create your own file in
+					# share/timezonesets/.
+#extra_float_digits = 0			# min -15, max 3
+#client_encoding = sql_ascii		# actually, defaults to database
+					# encoding
+
+# These settings are initialized by initdb, but they can be changed.
+lc_messages = 'en_US.UTF-8'			# locale for system error message
+					# strings
+lc_monetary = 'en_US.UTF-8'			# locale for monetary formatting
+lc_numeric = 'en_US.UTF-8'			# locale for number formatting
+lc_time = 'en_US.UTF-8'				# locale for time formatting
+
+# default configuration for text search
+default_text_search_config = 'pg_catalog.english'
+
+# - Other Defaults -
+
+#dynamic_library_path = '$libdir'
+#local_preload_libraries = ''
+
+
+#------------------------------------------------------------------------------
+# LOCK MANAGEMENT
+#------------------------------------------------------------------------------
+
+#deadlock_timeout = 1s
+#max_locks_per_transaction = 64		# min 10
+					# (change requires restart)
+# Note:  Each lock table slot uses ~270 bytes of shared memory, and there are
+# max_locks_per_transaction * (max_connections + max_prepared_transactions)
+# lock table slots.
+#max_pred_locks_per_transaction = 64	# min 10
+					# (change requires restart)
+
+#------------------------------------------------------------------------------
+# VERSION/PLATFORM COMPATIBILITY
+#------------------------------------------------------------------------------
+
+# - Previous PostgreSQL Versions -
+
+#array_nulls = on
+#backslash_quote = safe_encoding	# on, off, or safe_encoding
+#default_with_oids = off
+#escape_string_warning = on
+#lo_compat_privileges = off
+#quote_all_identifiers = off
+#sql_inheritance = on
+#standard_conforming_strings = on
+#synchronize_seqscans = on
+
+# - Other Platforms and Clients -
+
+#transform_null_equals = off
+
+
+#------------------------------------------------------------------------------
+# ERROR HANDLING
+#------------------------------------------------------------------------------
+
+#exit_on_error = off				# terminate session on any error?
+#restart_after_crash = on			# reinitialize after backend crash?
+
+
+#------------------------------------------------------------------------------
+# CUSTOMIZED OPTIONS
+#------------------------------------------------------------------------------
+
+#custom_variable_classes = ''		# list of custom variable class names
diff --git a/postgresql/files/9.1/postgresql.conf b/postgresql/files/9.1/postgresql.conf
new file mode 100644
index 0000000..5233e59
--- /dev/null
+++ b/postgresql/files/9.1/postgresql.conf
@@ -0,0 +1,563 @@
+{%- from "postgresql/map.jinja" import server with context %}
+# -----------------------------
+# PostgreSQL configuration file
+# -----------------------------
+#
+# This file consists of lines of the form:
+#
+#   name = value
+#
+# (The "=" is optional.)  Whitespace may be used.  Comments are introduced with
+# "#" anywhere on a line.  The complete list of parameter names and allowed
+# values can be found in the PostgreSQL documentation.
+#
+# The commented-out settings shown in this file represent the default values.
+# Re-commenting a setting is NOT sufficient to revert it to the default value;
+# you need to reload the server.
+#
+# This file is read on server startup and when the server receives a SIGHUP
+# signal.  If you edit the file on a running system, you have to SIGHUP the
+# server for the changes to take effect, or use "pg_ctl reload".  Some
+# parameters, which are marked below, require a server shutdown and restart to
+# take effect.
+#
+# Any parameter can also be given as a command-line option to the server, e.g.,
+# "postgres -c log_connections=on".  Some parameters can be changed at run time
+# with the "SET" SQL command.
+#
+# Memory units:  kB = kilobytes        Time units:  ms  = milliseconds
+#                MB = megabytes                     s   = seconds
+#                GB = gigabytes                     min = minutes
+#                                                   h   = hours
+#                                                   d   = days
+
+
+#------------------------------------------------------------------------------
+# FILE LOCATIONS
+#------------------------------------------------------------------------------
+
+# The default values of these variables are driven from the -D command-line
+# option or PGDATA environment variable, represented here as ConfigDir.
+
+data_directory = '/var/lib/postgresql/9.1/main'		# use data in another directory
+					# (change requires restart)
+hba_file = '/etc/postgresql/9.1/main/pg_hba.conf'	# host-based authentication file
+					# (change requires restart)
+ident_file = '/etc/postgresql/9.1/main/pg_ident.conf'	# ident configuration file
+					# (change requires restart)
+
+# If external_pid_file is not explicitly set, no extra PID file is written.
+external_pid_file = '/var/run/postgresql/9.1-main.pid'		# write an extra PID file
+					# (change requires restart)
+
+
+#------------------------------------------------------------------------------
+# CONNECTIONS AND AUTHENTICATION
+#------------------------------------------------------------------------------
+
+# - Connection Settings -
+{%- if server.bind.address == '0.0.0.0' %}
+listen_addresses = '*'
+{%- else %}
+listen_addresses = 'localhost'{% if server.bind.address != '127.0.0.1' %}, '{{ bind.address }}'{% endif %}
+{%- endif %}
+port = {{ server.bind.get('port', '5432') }}
+max_connections = 100
+# (change requires restart)
+# Note:  Increasing max_connections costs ~400 bytes of shared memory per
+# connection slot, plus lock space (see max_locks_per_transaction).
+#superuser_reserved_connections = 3	# (change requires restart)
+unix_socket_directory = '/var/run/postgresql'
+# (change requires restart)
+#unix_socket_group = ''
+# (change requires restart)
+#unix_socket_permissions = 0777		
+# begin with 0 to use octal notation
+# (change requires restart)
+#bonjour = off				
+# advertise server via Bonjour
+# (change requires restart)
+#bonjour_name = ''			
+# defaults to the computer name
+# (change requires restart)
+
+# - Security and Authentication -
+
+#authentication_timeout = 1min		# 1s-600s
+ssl = true				# (change requires restart)
+#ssl_ciphers = 'ALL:!ADH:!LOW:!EXP:!MD5:@STRENGTH'	# allowed SSL ciphers
+					# (change requires restart)
+#ssl_renegotiation_limit = 512MB	# amount of data between renegotiations
+#password_encryption = on
+#db_user_namespace = off
+
+# Kerberos and GSSAPI
+#krb_server_keyfile = ''
+#krb_srvname = 'postgres'		# (Kerberos only)
+#krb_caseins_users = off
+
+# - TCP Keepalives -
+# see "man 7 tcp" for details
+
+#tcp_keepalives_idle = 0		# TCP_KEEPIDLE, in seconds;
+					# 0 selects the system default
+#tcp_keepalives_interval = 0		# TCP_KEEPINTVL, in seconds;
+					# 0 selects the system default
+#tcp_keepalives_count = 0		# TCP_KEEPCNT;
+					# 0 selects the system default
+
+
+#------------------------------------------------------------------------------
+# RESOURCE USAGE (except WAL)
+#------------------------------------------------------------------------------
+
+# - Memory -
+
+shared_buffers = 24MB			# min 128kB
+					# (change requires restart)
+#temp_buffers = 8MB			# min 800kB
+#max_prepared_transactions = 0		# zero disables the feature
+					# (change requires restart)
+# Note:  Increasing max_prepared_transactions costs ~600 bytes of shared memory
+# per transaction slot, plus lock space (see max_locks_per_transaction).
+# It is not advisable to set max_prepared_transactions nonzero unless you
+# actively intend to use prepared transactions.
+#work_mem = 1MB				# min 64kB
+#maintenance_work_mem = 16MB		# min 1MB
+#max_stack_depth = 2MB			# min 100kB
+
+# - Kernel Resource Usage -
+
+#max_files_per_process = 1000		# min 25
+					# (change requires restart)
+#shared_preload_libraries = ''		# (change requires restart)
+
+# - Cost-Based Vacuum Delay -
+
+#vacuum_cost_delay = 0ms		# 0-100 milliseconds
+#vacuum_cost_page_hit = 1		# 0-10000 credits
+#vacuum_cost_page_miss = 10		# 0-10000 credits
+#vacuum_cost_page_dirty = 20		# 0-10000 credits
+#vacuum_cost_limit = 200		# 1-10000 credits
+
+# - Background Writer -
+
+#bgwriter_delay = 200ms			# 10-10000ms between rounds
+#bgwriter_lru_maxpages = 100		# 0-1000 max buffers written/round
+#bgwriter_lru_multiplier = 2.0		# 0-10.0 multipler on buffers scanned/round
+
+# - Asynchronous Behavior -
+
+#effective_io_concurrency = 1		# 1-1000. 0 disables prefetching
+
+
+#------------------------------------------------------------------------------
+# WRITE AHEAD LOG
+#------------------------------------------------------------------------------
+
+# - Settings -
+
+#wal_level = minimal			# minimal, archive, or hot_standby
+					# (change requires restart)
+#fsync = on				# turns forced synchronization on or off
+#synchronous_commit = on		# synchronization level; on, off, or local
+#wal_sync_method = fsync		# the default is the first option
+# supported by the operating system:
+#   open_datasync
+#   fdatasync (default on Linux)
+#   fsync
+#   fsync_writethrough
+#   open_sync
+#full_page_writes = on			# recover from partial page writes
+#wal_buffers = -1			# min 32kB, -1 sets based on shared_buffers
+					# (change requires restart)
+#wal_writer_delay = 200ms		# 1-10000 milliseconds
+
+#commit_delay = 0			# range 0-100000, in microseconds
+#commit_siblings = 5			# range 1-1000
+
+# - Checkpoints -
+
+#checkpoint_segments = 3		# in logfile segments, min 1, 16MB each
+#checkpoint_timeout = 5min		# range 30s-1h
+#checkpoint_completion_target = 0.5	# checkpoint target duration, 0.0 - 1.0
+#checkpoint_warning = 30s		# 0 disables
+
+# - Archiving -
+
+#archive_mode = off		# allows archiving to be done
+				# (change requires restart)
+#archive_command = ''		# command to use to archive a logfile segment
+#archive_timeout = 0		# force a logfile segment switch after this
+				# number of seconds; 0 disables
+
+
+#------------------------------------------------------------------------------
+# REPLICATION
+#------------------------------------------------------------------------------
+
+# - Master Server -
+
+# These settings are ignored on a standby server
+
+#max_wal_senders = 0		# max number of walsender processes
+				# (change requires restart)
+#wal_sender_delay = 1s		# walsender cycle time, 1-10000 milliseconds
+#wal_keep_segments = 0		# in logfile segments, 16MB each; 0 disables
+#vacuum_defer_cleanup_age = 0	# number of xacts by which cleanup is delayed
+#replication_timeout = 60s	# in milliseconds; 0 disables
+#synchronous_standby_names = ''	# standby servers that provide sync rep
+				# comma-separated list of application_name
+				# from standby(s); '*' = all
+
+# - Standby Servers -
+
+# These settings are ignored on a master server
+
+#hot_standby = off			# "on" allows queries during recovery
+					# (change requires restart)
+#max_standby_archive_delay = 30s	# max delay before canceling queries
+					# when reading WAL from archive;
+					# -1 allows indefinite delay
+#max_standby_streaming_delay = 30s	# max delay before canceling queries
+					# when reading streaming WAL;
+					# -1 allows indefinite delay
+#wal_receiver_status_interval = 10s	# send replies at least this often
+					# 0 disables
+#hot_standby_feedback = off		# send info from standby to prevent
+					# query conflicts
+
+
+#------------------------------------------------------------------------------
+# QUERY TUNING
+#------------------------------------------------------------------------------
+
+# - Planner Method Configuration -
+
+#enable_bitmapscan = on
+#enable_hashagg = on
+#enable_hashjoin = on
+#enable_indexscan = on
+#enable_material = on
+#enable_mergejoin = on
+#enable_nestloop = on
+#enable_seqscan = on
+#enable_sort = on
+#enable_tidscan = on
+
+# - Planner Cost Constants -
+
+#seq_page_cost = 1.0			# measured on an arbitrary scale
+#random_page_cost = 4.0			# same scale as above
+#cpu_tuple_cost = 0.01			# same scale as above
+#cpu_index_tuple_cost = 0.005		# same scale as above
+#cpu_operator_cost = 0.0025		# same scale as above
+#effective_cache_size = 128MB
+
+# - Genetic Query Optimizer -
+
+#geqo = on
+#geqo_threshold = 12
+#geqo_effort = 5			# range 1-10
+#geqo_pool_size = 0			# selects default based on effort
+#geqo_generations = 0			# selects default based on effort
+#geqo_selection_bias = 2.0		# range 1.5-2.0
+#geqo_seed = 0.0			# range 0.0-1.0
+
+# - Other Planner Options -
+
+#default_statistics_target = 100	# range 1-10000
+#constraint_exclusion = partition	# on, off, or partition
+#cursor_tuple_fraction = 0.1		# range 0.0-1.0
+#from_collapse_limit = 8
+#join_collapse_limit = 8		# 1 disables collapsing of explicit
+					# JOIN clauses
+
+
+#------------------------------------------------------------------------------
+# ERROR REPORTING AND LOGGING
+#------------------------------------------------------------------------------
+
+# - Where to Log -
+
+#log_destination = 'stderr'		# Valid values are combinations of
+					# stderr, csvlog, syslog, and eventlog,
+					# depending on platform.  csvlog
+					# requires logging_collector to be on.
+
+# This is used when logging to stderr:
+#logging_collector = off		# Enable capturing of stderr and csvlog
+					# into log files. Required to be on for
+					# csvlogs.
+					# (change requires restart)
+
+# These are only used if logging_collector is on:
+#log_directory = 'pg_log'		# directory where log files are written,
+					# can be absolute or relative to PGDATA
+#log_filename = 'postgresql-%Y-%m-%d_%H%M%S.log'	# log file name pattern,
+					# can include strftime() escapes
+#log_file_mode = 0600			# creation mode for log files,
+					# begin with 0 to use octal notation
+#log_truncate_on_rotation = off		# If on, an existing log file with the
+					# same name as the new log file will be
+					# truncated rather than appended to.
+					# But such truncation only occurs on
+					# time-driven rotation, not on restarts
+					# or size-driven rotation.  Default is
+					# off, meaning append to existing files
+					# in all cases.
+#log_rotation_age = 1d			# Automatic rotation of logfiles will
+					# happen after that time.  0 disables.
+#log_rotation_size = 10MB		# Automatic rotation of logfiles will
+					# happen after that much log output.
+					# 0 disables.
+
+# These are relevant when logging to syslog:
+#syslog_facility = 'LOCAL0'
+#syslog_ident = 'postgres'
+
+#silent_mode = off			# Run server silently.
+					# DO NOT USE without syslog or
+					# logging_collector
+					# (change requires restart)
+
+
+# - When to Log -
+
+#client_min_messages = notice		# values in order of decreasing detail:
+					#   debug5
+					#   debug4
+					#   debug3
+					#   debug2
+					#   debug1
+					#   log
+					#   notice
+					#   warning
+					#   error
+
+#log_min_messages = warning		# values in order of decreasing detail:
+					#   debug5
+					#   debug4
+					#   debug3
+					#   debug2
+					#   debug1
+					#   info
+					#   notice
+					#   warning
+					#   error
+					#   log
+					#   fatal
+					#   panic
+
+#log_min_error_statement = error	# values in order of decreasing detail:
+				 	#   debug5
+					#   debug4
+					#   debug3
+					#   debug2
+					#   debug1
+				 	#   info
+					#   notice
+					#   warning
+					#   error
+					#   log
+					#   fatal
+					#   panic (effectively off)
+
+#log_min_duration_statement = -1	# -1 is disabled, 0 logs all statements
+					# and their durations, > 0 logs only
+					# statements running at least this number
+					# of milliseconds
+
+
+# - What to Log -
+
+#debug_print_parse = off
+#debug_print_rewritten = off
+#debug_print_plan = off
+#debug_pretty_print = on
+#log_checkpoints = off
+#log_connections = off
+#log_disconnections = off
+#log_duration = off
+#log_error_verbosity = default		# terse, default, or verbose messages
+#log_hostname = off
+log_line_prefix = '%t '			# special values:
+					#   %a = application name
+					#   %u = user name
+					#   %d = database name
+					#   %r = remote host and port
+					#   %h = remote host
+					#   %p = process ID
+					#   %t = timestamp without milliseconds
+					#   %m = timestamp with milliseconds
+					#   %i = command tag
+					#   %e = SQL state
+					#   %c = session ID
+					#   %l = session line number
+					#   %s = session start timestamp
+					#   %v = virtual transaction ID
+					#   %x = transaction ID (0 if none)
+					#   %q = stop here in non-session
+					#        processes
+					#   %% = '%'
+					# e.g. '<%u%%%d> '
+#log_lock_waits = off			# log lock waits >= deadlock_timeout
+#log_statement = 'none'			# none, ddl, mod, all
+#log_temp_files = -1			# log temporary files equal or larger
+					# than the specified size in kilobytes;
+					# -1 disables, 0 logs all temp files
+#log_timezone = '(defaults to server environment setting)'
+
+
+#------------------------------------------------------------------------------
+# RUNTIME STATISTICS
+#------------------------------------------------------------------------------
+
+# - Query/Index Statistics Collector -
+
+#track_activities = on
+#track_counts = on
+#track_functions = none			# none, pl, all
+#track_activity_query_size = 1024 	# (change requires restart)
+#update_process_title = on
+#stats_temp_directory = 'pg_stat_tmp'
+
+
+# - Statistics Monitoring -
+
+#log_parser_stats = off
+#log_planner_stats = off
+#log_executor_stats = off
+#log_statement_stats = off
+
+
+#------------------------------------------------------------------------------
+# AUTOVACUUM PARAMETERS
+#------------------------------------------------------------------------------
+
+#autovacuum = on			# Enable autovacuum subprocess?  'on'
+					# requires track_counts to also be on.
+#log_autovacuum_min_duration = -1	# -1 disables, 0 logs all actions and
+					# their durations, > 0 logs only
+					# actions running at least this number
+					# of milliseconds.
+#autovacuum_max_workers = 3		# max number of autovacuum subprocesses
+					# (change requires restart)
+#autovacuum_naptime = 1min		# time between autovacuum runs
+#autovacuum_vacuum_threshold = 50	# min number of row updates before
+					# vacuum
+#autovacuum_analyze_threshold = 50	# min number of row updates before
+					# analyze
+#autovacuum_vacuum_scale_factor = 0.2	# fraction of table size before vacuum
+#autovacuum_analyze_scale_factor = 0.1	# fraction of table size before analyze
+#autovacuum_freeze_max_age = 200000000	# maximum XID age before forced vacuum
+					# (change requires restart)
+#autovacuum_vacuum_cost_delay = 20ms	# default vacuum cost delay for
+					# autovacuum, in milliseconds;
+					# -1 means use vacuum_cost_delay
+#autovacuum_vacuum_cost_limit = -1	# default vacuum cost limit for
+					# autovacuum, -1 means use
+					# vacuum_cost_limit
+
+
+#------------------------------------------------------------------------------
+# CLIENT CONNECTION DEFAULTS
+#------------------------------------------------------------------------------
+
+# - Statement Behavior -
+
+#search_path = '"$user",public'		# schema names
+#default_tablespace = ''		# a tablespace name, '' uses the default
+#temp_tablespaces = ''			# a list of tablespace names, '' uses
+					# only default tablespace
+#check_function_bodies = on
+#default_transaction_isolation = 'read committed'
+#default_transaction_read_only = off
+#default_transaction_deferrable = off
+#session_replication_role = 'origin'
+#statement_timeout = 0			# in milliseconds, 0 is disabled
+#vacuum_freeze_min_age = 50000000
+#vacuum_freeze_table_age = 150000000
+#bytea_output = 'hex'			# hex, escape
+#xmlbinary = 'base64'
+#xmloption = 'content'
+
+# - Locale and Formatting -
+
+datestyle = 'iso, mdy'
+#intervalstyle = 'postgres'
+#timezone = '(defaults to server environment setting)'
+#timezone_abbreviations = 'Default'     # Select the set of available time zone
+					# abbreviations.  Currently, there are
+					#   Default
+					#   Australia
+					#   India
+					# You can create your own file in
+					# share/timezonesets/.
+#extra_float_digits = 0			# min -15, max 3
+#client_encoding = sql_ascii		# actually, defaults to database
+					# encoding
+
+# These settings are initialized by initdb, but they can be changed.
+lc_messages = 'en_US.UTF-8'			# locale for system error message
+					# strings
+lc_monetary = 'en_US.UTF-8'			# locale for monetary formatting
+lc_numeric = 'en_US.UTF-8'			# locale for number formatting
+lc_time = 'en_US.UTF-8'				# locale for time formatting
+
+# default configuration for text search
+default_text_search_config = 'pg_catalog.english'
+
+# - Other Defaults -
+
+#dynamic_library_path = '$libdir'
+#local_preload_libraries = ''
+
+
+#------------------------------------------------------------------------------
+# LOCK MANAGEMENT
+#------------------------------------------------------------------------------
+
+#deadlock_timeout = 1s
+#max_locks_per_transaction = 64		# min 10
+					# (change requires restart)
+# Note:  Each lock table slot uses ~270 bytes of shared memory, and there are
+# max_locks_per_transaction * (max_connections + max_prepared_transactions)
+# lock table slots.
+#max_pred_locks_per_transaction = 64	# min 10
+					# (change requires restart)
+
+#------------------------------------------------------------------------------
+# VERSION/PLATFORM COMPATIBILITY
+#------------------------------------------------------------------------------
+
+# - Previous PostgreSQL Versions -
+
+#array_nulls = on
+#backslash_quote = safe_encoding	# on, off, or safe_encoding
+#default_with_oids = off
+#escape_string_warning = on
+#lo_compat_privileges = off
+#quote_all_identifiers = off
+#sql_inheritance = on
+#standard_conforming_strings = on
+#synchronize_seqscans = on
+
+# - Other Platforms and Clients -
+
+#transform_null_equals = off
+
+
+#------------------------------------------------------------------------------
+# ERROR HANDLING
+#------------------------------------------------------------------------------
+
+#exit_on_error = off				# terminate session on any error?
+#restart_after_crash = on			# reinitialize after backend crash?
+
+
+#------------------------------------------------------------------------------
+# CUSTOMIZED OPTIONS
+#------------------------------------------------------------------------------
+
+#custom_variable_classes = ''		# list of custom variable class names
diff --git a/postgresql/files/9.3/postgresql.conf b/postgresql/files/9.3/postgresql.conf
new file mode 100644
index 0000000..4714654
--- /dev/null
+++ b/postgresql/files/9.3/postgresql.conf
@@ -0,0 +1,598 @@
+{%- from "postgresql/map.jinja" import server with context %}
+# -----------------------------
+# PostgreSQL configuration file
+# -----------------------------
+#
+# This file consists of lines of the form:
+#
+#   name = value
+#
+# (The "=" is optional.)  Whitespace may be used.  Comments are introduced with
+# "#" anywhere on a line.  The complete list of parameter names and allowed
+# values can be found in the PostgreSQL documentation.
+#
+# The commented-out settings shown in this file represent the default values.
+# Re-commenting a setting is NOT sufficient to revert it to the default value;
+# you need to reload the server.
+#
+# This file is read on server startup and when the server receives a SIGHUP
+# signal.  If you edit the file on a running system, you have to SIGHUP the
+# server for the changes to take effect, or use "pg_ctl reload".  Some
+# parameters, which are marked below, require a server shutdown and restart to
+# take effect.
+#
+# Any parameter can also be given as a command-line option to the server, e.g.,
+# "postgres -c log_connections=on".  Some parameters can be changed at run time
+# with the "SET" SQL command.
+#
+# Memory units:  kB = kilobytes        Time units:  ms  = milliseconds
+#                MB = megabytes                     s   = seconds
+#                GB = gigabytes                     min = minutes
+#                                                   h   = hours
+#                                                   d   = days
+
+
+#------------------------------------------------------------------------------
+# FILE LOCATIONS
+#------------------------------------------------------------------------------
+
+# The default values of these variables are driven from the -D command-line
+# option or PGDATA environment variable, represented here as ConfigDir.
+
+data_directory = '/var/lib/postgresql/9.3/main'		# use data in another directory
+					# (change requires restart)
+hba_file = '/etc/postgresql/9.3/main/pg_hba.conf'	# host-based authentication file
+					# (change requires restart)
+ident_file = '/etc/postgresql/9.3/main/pg_ident.conf'	# ident configuration file
+					# (change requires restart)
+
+# If external_pid_file is not explicitly set, no extra PID file is written.
+external_pid_file = '/var/run/postgresql/9.3-main.pid'			# write an extra PID file
+					# (change requires restart)
+
+
+#------------------------------------------------------------------------------
+# CONNECTIONS AND AUTHENTICATION
+#------------------------------------------------------------------------------
+
+# - Connection Settings -
+
+{%- if server.bind.address == '0.0.0.0' %}
+listen_addresses = '*'
+{%- else %}
+listen_addresses = 'localhost'{% if server.bind.address != '127.0.0.1' %}, '{{ bind.address }}'{% endif %}
+{%- endif %}
+port = {{ server.bind.get('port', '5432') }}
+max_connections = 100			# (change requires restart)
+# Note:  Increasing max_connections costs ~400 bytes of shared memory per
+# connection slot, plus lock space (see max_locks_per_transaction).
+#superuser_reserved_connections = 3	# (change requires restart)
+unix_socket_directories = '/var/run/postgresql'	# comma-separated list of directories
+					# (change requires restart)
+#unix_socket_group = ''			# (change requires restart)
+#unix_socket_permissions = 0777		# begin with 0 to use octal notation
+					# (change requires restart)
+#bonjour = off				# advertise server via Bonjour
+					# (change requires restart)
+#bonjour_name = ''			# defaults to the computer name
+					# (change requires restart)
+
+# - Security and Authentication -
+
+#authentication_timeout = 1min		# 1s-600s
+ssl = true				# (change requires restart)
+#ssl_ciphers = 'DEFAULT:!LOW:!EXP:!MD5:@STRENGTH'	# allowed SSL ciphers
+					# (change requires restart)
+#ssl_renegotiation_limit = 512MB	# amount of data between renegotiations
+ssl_cert_file = '/etc/ssl/certs/ssl-cert-snakeoil.pem'		# (change requires restart)
+ssl_key_file = '/etc/ssl/private/ssl-cert-snakeoil.key'		# (change requires restart)
+#ssl_ca_file = ''			# (change requires restart)
+#ssl_crl_file = ''			# (change requires restart)
+#password_encryption = on
+#db_user_namespace = off
+
+# Kerberos and GSSAPI
+#krb_server_keyfile = ''
+#krb_srvname = 'postgres'		# (Kerberos only)
+#krb_caseins_users = off
+
+# - TCP Keepalives -
+# see "man 7 tcp" for details
+
+#tcp_keepalives_idle = 0		# TCP_KEEPIDLE, in seconds;
+					# 0 selects the system default
+#tcp_keepalives_interval = 0		# TCP_KEEPINTVL, in seconds;
+					# 0 selects the system default
+#tcp_keepalives_count = 0		# TCP_KEEPCNT;
+					# 0 selects the system default
+
+
+#------------------------------------------------------------------------------
+# RESOURCE USAGE (except WAL)
+#------------------------------------------------------------------------------
+
+# - Memory -
+
+shared_buffers = 128MB			# min 128kB
+					# (change requires restart)
+#temp_buffers = 8MB			# min 800kB
+#max_prepared_transactions = 0		# zero disables the feature
+					# (change requires restart)
+# Note:  Increasing max_prepared_transactions costs ~600 bytes of shared memory
+# per transaction slot, plus lock space (see max_locks_per_transaction).
+# It is not advisable to set max_prepared_transactions nonzero unless you
+# actively intend to use prepared transactions.
+#work_mem = 1MB				# min 64kB
+#maintenance_work_mem = 16MB		# min 1MB
+#max_stack_depth = 2MB			# min 100kB
+
+# - Disk -
+
+#temp_file_limit = -1			# limits per-session temp file space
+					# in kB, or -1 for no limit
+
+# - Kernel Resource Usage -
+
+#max_files_per_process = 1000		# min 25
+					# (change requires restart)
+#shared_preload_libraries = ''		# (change requires restart)
+
+# - Cost-Based Vacuum Delay -
+
+#vacuum_cost_delay = 0			# 0-100 milliseconds
+#vacuum_cost_page_hit = 1		# 0-10000 credits
+#vacuum_cost_page_miss = 10		# 0-10000 credits
+#vacuum_cost_page_dirty = 20		# 0-10000 credits
+#vacuum_cost_limit = 200		# 1-10000 credits
+
+# - Background Writer -
+
+#bgwriter_delay = 200ms			# 10-10000ms between rounds
+#bgwriter_lru_maxpages = 100		# 0-1000 max buffers written/round
+#bgwriter_lru_multiplier = 2.0		# 0-10.0 multipler on buffers scanned/round
+
+# - Asynchronous Behavior -
+
+#effective_io_concurrency = 1		# 1-1000; 0 disables prefetching
+
+
+#------------------------------------------------------------------------------
+# WRITE AHEAD LOG
+#------------------------------------------------------------------------------
+
+# - Settings -
+
+#wal_level = minimal			# minimal, archive, or hot_standby
+					# (change requires restart)
+#fsync = on				# turns forced synchronization on or off
+#synchronous_commit = on		# synchronization level;
+					# off, local, remote_write, or on
+#wal_sync_method = fsync		# the default is the first option
+					# supported by the operating system:
+					#   open_datasync
+					#   fdatasync (default on Linux)
+					#   fsync
+					#   fsync_writethrough
+					#   open_sync
+#full_page_writes = on			# recover from partial page writes
+#wal_buffers = -1			# min 32kB, -1 sets based on shared_buffers
+					# (change requires restart)
+#wal_writer_delay = 200ms		# 1-10000 milliseconds
+
+#commit_delay = 0			# range 0-100000, in microseconds
+#commit_siblings = 5			# range 1-1000
+
+# - Checkpoints -
+
+#checkpoint_segments = 3		# in logfile segments, min 1, 16MB each
+#checkpoint_timeout = 5min		# range 30s-1h
+#checkpoint_completion_target = 0.5	# checkpoint target duration, 0.0 - 1.0
+#checkpoint_warning = 30s		# 0 disables
+
+# - Archiving -
+
+#archive_mode = off		# allows archiving to be done
+				# (change requires restart)
+#archive_command = ''		# command to use to archive a logfile segment
+				# placeholders: %p = path of file to archive
+				#               %f = file name only
+				# e.g. 'test ! -f /mnt/server/archivedir/%f && cp %p /mnt/server/archivedir/%f'
+#archive_timeout = 0		# force a logfile segment switch after this
+				# number of seconds; 0 disables
+
+
+#------------------------------------------------------------------------------
+# REPLICATION
+#------------------------------------------------------------------------------
+
+# - Sending Server(s) -
+
+# Set these on the master and on any standby that will send replication data.
+
+#max_wal_senders = 0		# max number of walsender processes
+				# (change requires restart)
+#wal_keep_segments = 0		# in logfile segments, 16MB each; 0 disables
+#wal_sender_timeout = 60s	# in milliseconds; 0 disables
+
+# - Master Server -
+
+# These settings are ignored on a standby server.
+
+#synchronous_standby_names = ''	# standby servers that provide sync rep
+				# comma-separated list of application_name
+				# from standby(s); '*' = all
+#vacuum_defer_cleanup_age = 0	# number of xacts by which cleanup is delayed
+
+# - Standby Servers -
+
+# These settings are ignored on a master server.
+
+#hot_standby = off			# "on" allows queries during recovery
+					# (change requires restart)
+#max_standby_archive_delay = 30s	# max delay before canceling queries
+					# when reading WAL from archive;
+					# -1 allows indefinite delay
+#max_standby_streaming_delay = 30s	# max delay before canceling queries
+					# when reading streaming WAL;
+					# -1 allows indefinite delay
+#wal_receiver_status_interval = 10s	# send replies at least this often
+					# 0 disables
+#hot_standby_feedback = off		# send info from standby to prevent
+					# query conflicts
+#wal_receiver_timeout = 60s		# time that receiver waits for
+					# communication from master
+					# in milliseconds; 0 disables
+
+
+#------------------------------------------------------------------------------
+# QUERY TUNING
+#------------------------------------------------------------------------------
+
+# - Planner Method Configuration -
+
+#enable_bitmapscan = on
+#enable_hashagg = on
+#enable_hashjoin = on
+#enable_indexscan = on
+#enable_indexonlyscan = on
+#enable_material = on
+#enable_mergejoin = on
+#enable_nestloop = on
+#enable_seqscan = on
+#enable_sort = on
+#enable_tidscan = on
+
+# - Planner Cost Constants -
+
+#seq_page_cost = 1.0			# measured on an arbitrary scale
+#random_page_cost = 4.0			# same scale as above
+#cpu_tuple_cost = 0.01			# same scale as above
+#cpu_index_tuple_cost = 0.005		# same scale as above
+#cpu_operator_cost = 0.0025		# same scale as above
+#effective_cache_size = 128MB
+
+# - Genetic Query Optimizer -
+
+#geqo = on
+#geqo_threshold = 12
+#geqo_effort = 5			# range 1-10
+#geqo_pool_size = 0			# selects default based on effort
+#geqo_generations = 0			# selects default based on effort
+#geqo_selection_bias = 2.0		# range 1.5-2.0
+#geqo_seed = 0.0			# range 0.0-1.0
+
+# - Other Planner Options -
+
+#default_statistics_target = 100	# range 1-10000
+#constraint_exclusion = partition	# on, off, or partition
+#cursor_tuple_fraction = 0.1		# range 0.0-1.0
+#from_collapse_limit = 8
+#join_collapse_limit = 8		# 1 disables collapsing of explicit
+					# JOIN clauses
+
+
+#------------------------------------------------------------------------------
+# ERROR REPORTING AND LOGGING
+#------------------------------------------------------------------------------
+
+# - Where to Log -
+
+#log_destination = 'stderr'		# Valid values are combinations of
+					# stderr, csvlog, syslog, and eventlog,
+					# depending on platform.  csvlog
+					# requires logging_collector to be on.
+
+# This is used when logging to stderr:
+#logging_collector = off		# Enable capturing of stderr and csvlog
+					# into log files. Required to be on for
+					# csvlogs.
+					# (change requires restart)
+
+# These are only used if logging_collector is on:
+#log_directory = 'pg_log'		# directory where log files are written,
+					# can be absolute or relative to PGDATA
+#log_filename = 'postgresql-%Y-%m-%d_%H%M%S.log'	# log file name pattern,
+					# can include strftime() escapes
+#log_file_mode = 0600			# creation mode for log files,
+					# begin with 0 to use octal notation
+#log_truncate_on_rotation = off		# If on, an existing log file with the
+					# same name as the new log file will be
+					# truncated rather than appended to.
+					# But such truncation only occurs on
+					# time-driven rotation, not on restarts
+					# or size-driven rotation.  Default is
+					# off, meaning append to existing files
+					# in all cases.
+#log_rotation_age = 1d			# Automatic rotation of logfiles will
+					# happen after that time.  0 disables.
+#log_rotation_size = 10MB		# Automatic rotation of logfiles will
+					# happen after that much log output.
+					# 0 disables.
+
+# These are relevant when logging to syslog:
+#syslog_facility = 'LOCAL0'
+#syslog_ident = 'postgres'
+
+# This is only relevant when logging to eventlog (win32):
+#event_source = 'PostgreSQL'
+
+# - When to Log -
+
+#client_min_messages = notice		# values in order of decreasing detail:
+					#   debug5
+					#   debug4
+					#   debug3
+					#   debug2
+					#   debug1
+					#   log
+					#   notice
+					#   warning
+					#   error
+
+#log_min_messages = warning		# values in order of decreasing detail:
+					#   debug5
+					#   debug4
+					#   debug3
+					#   debug2
+					#   debug1
+					#   info
+					#   notice
+					#   warning
+					#   error
+					#   log
+					#   fatal
+					#   panic
+
+#log_min_error_statement = error	# values in order of decreasing detail:
+					#   debug5
+					#   debug4
+					#   debug3
+					#   debug2
+					#   debug1
+					#   info
+					#   notice
+					#   warning
+					#   error
+					#   log
+					#   fatal
+					#   panic (effectively off)
+
+#log_min_duration_statement = -1	# -1 is disabled, 0 logs all statements
+					# and their durations, > 0 logs only
+					# statements running at least this number
+					# of milliseconds
+
+
+# - What to Log -
+
+#debug_print_parse = off
+#debug_print_rewritten = off
+#debug_print_plan = off
+#debug_pretty_print = on
+#log_checkpoints = off
+#log_connections = off
+#log_disconnections = off
+#log_duration = off
+#log_error_verbosity = default		# terse, default, or verbose messages
+#log_hostname = off
+log_line_prefix = '%t '			# special values:
+					#   %a = application name
+					#   %u = user name
+					#   %d = database name
+					#   %r = remote host and port
+					#   %h = remote host
+					#   %p = process ID
+					#   %t = timestamp without milliseconds
+					#   %m = timestamp with milliseconds
+					#   %i = command tag
+					#   %e = SQL state
+					#   %c = session ID
+					#   %l = session line number
+					#   %s = session start timestamp
+					#   %v = virtual transaction ID
+					#   %x = transaction ID (0 if none)
+					#   %q = stop here in non-session
+					#        processes
+					#   %% = '%'
+					# e.g. '<%u%%%d> '
+#log_lock_waits = off			# log lock waits >= deadlock_timeout
+#log_statement = 'none'			# none, ddl, mod, all
+#log_temp_files = -1			# log temporary files equal or larger
+					# than the specified size in kilobytes;
+					# -1 disables, 0 logs all temp files
+log_timezone = 'localtime'
+
+
+#------------------------------------------------------------------------------
+# RUNTIME STATISTICS
+#------------------------------------------------------------------------------
+
+# - Query/Index Statistics Collector -
+
+#track_activities = on
+#track_counts = on
+#track_io_timing = off
+#track_functions = none			# none, pl, all
+#track_activity_query_size = 1024	# (change requires restart)
+#update_process_title = on
+#stats_temp_directory = 'pg_stat_tmp'
+
+
+# - Statistics Monitoring -
+
+#log_parser_stats = off
+#log_planner_stats = off
+#log_executor_stats = off
+#log_statement_stats = off
+
+
+#------------------------------------------------------------------------------
+# AUTOVACUUM PARAMETERS
+#------------------------------------------------------------------------------
+
+#autovacuum = on			# Enable autovacuum subprocess?  'on'
+					# requires track_counts to also be on.
+#log_autovacuum_min_duration = -1	# -1 disables, 0 logs all actions and
+					# their durations, > 0 logs only
+					# actions running at least this number
+					# of milliseconds.
+#autovacuum_max_workers = 3		# max number of autovacuum subprocesses
+					# (change requires restart)
+#autovacuum_naptime = 1min		# time between autovacuum runs
+#autovacuum_vacuum_threshold = 50	# min number of row updates before
+					# vacuum
+#autovacuum_analyze_threshold = 50	# min number of row updates before
+					# analyze
+#autovacuum_vacuum_scale_factor = 0.2	# fraction of table size before vacuum
+#autovacuum_analyze_scale_factor = 0.1	# fraction of table size before analyze
+#autovacuum_freeze_max_age = 200000000	# maximum XID age before forced vacuum
+					# (change requires restart)
+#autovacuum_multixact_freeze_max_age = 400000000	# maximum Multixact age
+					# before forced vacuum
+					# (change requires restart)
+#autovacuum_vacuum_cost_delay = 20ms	# default vacuum cost delay for
+					# autovacuum, in milliseconds;
+					# -1 means use vacuum_cost_delay
+#autovacuum_vacuum_cost_limit = -1	# default vacuum cost limit for
+					# autovacuum, -1 means use
+					# vacuum_cost_limit
+
+
+#------------------------------------------------------------------------------
+# CLIENT CONNECTION DEFAULTS
+#------------------------------------------------------------------------------
+
+# - Statement Behavior -
+
+#search_path = '"$user",public'		# schema names
+#default_tablespace = ''		# a tablespace name, '' uses the default
+#temp_tablespaces = ''			# a list of tablespace names, '' uses
+					# only default tablespace
+#check_function_bodies = on
+#default_transaction_isolation = 'read committed'
+#default_transaction_read_only = off
+#default_transaction_deferrable = off
+#session_replication_role = 'origin'
+#statement_timeout = 0			# in milliseconds, 0 is disabled
+#lock_timeout = 0			# in milliseconds, 0 is disabled
+#vacuum_freeze_min_age = 50000000
+#vacuum_freeze_table_age = 150000000
+#vacuum_multixact_freeze_min_age = 5000000
+#vacuum_multixact_freeze_table_age = 150000000
+#bytea_output = 'hex'			# hex, escape
+#xmlbinary = 'base64'
+#xmloption = 'content'
+
+# - Locale and Formatting -
+
+datestyle = 'iso, mdy'
+#intervalstyle = 'postgres'
+timezone = 'localtime'
+#timezone_abbreviations = 'Default'     # Select the set of available time zone
+					# abbreviations.  Currently, there are
+					#   Default
+					#   Australia
+					#   India
+					# You can create your own file in
+					# share/timezonesets/.
+#extra_float_digits = 0			# min -15, max 3
+#client_encoding = sql_ascii		# actually, defaults to database
+					# encoding
+
+# These settings are initialized by initdb, but they can be changed.
+lc_messages = 'en_US.UTF-8'			# locale for system error message
+					# strings
+lc_monetary = 'en_US.UTF-8'			# locale for monetary formatting
+lc_numeric = 'en_US.UTF-8'			# locale for number formatting
+lc_time = 'en_US.UTF-8'				# locale for time formatting
+
+# default configuration for text search
+default_text_search_config = 'pg_catalog.english'
+
+# - Other Defaults -
+
+#dynamic_library_path = '$libdir'
+#local_preload_libraries = ''
+
+
+#------------------------------------------------------------------------------
+# LOCK MANAGEMENT
+#------------------------------------------------------------------------------
+
+#deadlock_timeout = 1s
+#max_locks_per_transaction = 64		# min 10
+					# (change requires restart)
+# Note:  Each lock table slot uses ~270 bytes of shared memory, and there are
+# max_locks_per_transaction * (max_connections + max_prepared_transactions)
+# lock table slots.
+#max_pred_locks_per_transaction = 64	# min 10
+					# (change requires restart)
+
+
+#------------------------------------------------------------------------------
+# VERSION/PLATFORM COMPATIBILITY
+#------------------------------------------------------------------------------
+
+# - Previous PostgreSQL Versions -
+
+#array_nulls = on
+#backslash_quote = safe_encoding	# on, off, or safe_encoding
+#default_with_oids = off
+#escape_string_warning = on
+#lo_compat_privileges = off
+#quote_all_identifiers = off
+#sql_inheritance = on
+#standard_conforming_strings = on
+#synchronize_seqscans = on
+
+# - Other Platforms and Clients -
+
+#transform_null_equals = off
+
+
+#------------------------------------------------------------------------------
+# ERROR HANDLING
+#------------------------------------------------------------------------------
+
+#exit_on_error = off			# terminate session on any error?
+#restart_after_crash = on		# reinitialize after backend crash?
+
+
+#------------------------------------------------------------------------------
+# CONFIG FILE INCLUDES
+#------------------------------------------------------------------------------
+
+# These options allow settings to be loaded from files other than the
+# default postgresql.conf.
+
+#include_dir = 'conf.d'			# include files ending in '.conf' from
+					# directory 'conf.d'
+#include_if_exists = 'exists.conf'	# include file only if it exists
+#include = 'special.conf'		# include file
+
+
+#------------------------------------------------------------------------------
+# CUSTOMIZED OPTIONS
+#------------------------------------------------------------------------------
+
+# Add settings for extensions here
diff --git a/postgresql/files/backupninja.conf b/postgresql/files/backupninja.conf
new file mode 100644
index 0000000..e602a89
--- /dev/null
+++ b/postgresql/files/backupninja.conf
@@ -0,0 +1,2 @@
+
+include = /var/backups/postgresql
diff --git a/postgresql/files/collectd.conf b/postgresql/files/collectd.conf
new file mode 100644
index 0000000..ed70b62
--- /dev/null
+++ b/postgresql/files/collectd.conf
@@ -0,0 +1,39 @@
+{%- from "linux/map.jinja" import system with context %}
+{%- from "postgresql/map.jinja" import server with context %}
+LoadPlugin postgresql
+<Plugin postgresql>
+  <Query row_stats>
+    Statement "SELECT sum(n_tup_ins) AS inserts, \
+      sum(n_tup_upd) AS updates, \
+      sum(n_tup_del) AS deletes \
+      FROM pg_stat_user_tables"
+    <Result>
+      Type derive
+      InstancePrefix "rows_inserted"
+      ValuesFrom "inserts"
+    </Result>
+    <Result>
+      Type derive
+      InstancePrefix "rows_updated"
+      ValuesFrom "updates"
+    </Result>
+    <Result>
+      Type derive
+      InstancePrefix "rows_deleted"
+      ValuesFrom "deletes"
+    </Result>
+  </Query>
+  {%- for database_name, database in server.get('database', {}).iteritems() %}
+  <Database {{ database_name }}>
+    Host "{{ system.name }}.{{ system.domain }}"
+    Port 5432
+    {%- for user in database.users %}
+    {%- if loop.first %}
+    User "{{ user.name }}"
+    Password "{{ user.password }}"
+    {%- endif %}
+    {%- endfor %}
+    Query row_stats
+  </Database>
+  {%- endfor %}
+</Plugin>
diff --git a/postgresql/files/pg_hba.conf b/postgresql/files/pg_hba.conf
new file mode 100644
index 0000000..4dd8b33
--- /dev/null
+++ b/postgresql/files/pg_hba.conf
@@ -0,0 +1,125 @@
+{%- from "postgresql/map.jinja" import server with context %}
+# PostgreSQL Client Authentication Configuration File
+# ===================================================
+#
+# Refer to the "Client Authentication" section in the PostgreSQL
+# documentation for a complete description of this file.  A short
+# synopsis follows.
+#
+# This file controls: which hosts are allowed to connect, how clients
+# are authenticated, which PostgreSQL user names they can use, which
+# databases they can access.  Records take one of these forms:
+#
+# local      DATABASE  USER  METHOD  [OPTIONS]
+# host       DATABASE  USER  ADDRESS  METHOD  [OPTIONS]
+# hostssl    DATABASE  USER  ADDRESS  METHOD  [OPTIONS]
+# hostnossl  DATABASE  USER  ADDRESS  METHOD  [OPTIONS]
+#
+# (The uppercase items must be replaced by actual values.)
+#
+# The first field is the connection type: "local" is a Unix-domain
+# socket, "host" is either a plain or SSL-encrypted TCP/IP socket,
+# "hostssl" is an SSL-encrypted TCP/IP socket, and "hostnossl" is a
+# plain TCP/IP socket.
+#
+# DATABASE can be "all", "sameuser", "samerole", "replication", a
+# database name, or a comma-separated list thereof. The "all"
+# keyword does not match "replication". Access to replication
+# must be enabled in a separate record (see example below).
+#
+# USER can be "all", a user name, a group name prefixed with "+", or a
+# comma-separated list thereof.  In both the DATABASE and USER fields
+# you can also write a file name prefixed with "@" to include names
+# from a separate file.
+#
+# ADDRESS specifies the set of hosts the record matches.  It can be a
+# host name, or it is made up of an IP address and a CIDR mask that is
+# an integer (between 0 and 32 (IPv4) or 128 (IPv6) inclusive) that
+# specifies the number of significant bits in the mask.  A host name
+# that starts with a dot (.) matches a suffix of the actual host name.
+# Alternatively, you can write an IP address and netmask in separate
+# columns to specify the set of hosts.  Instead of a CIDR-address, you
+# can write "samehost" to match any of the server's own IP addresses,
+# or "samenet" to match any address in any subnet that the server is
+# directly connected to.
+#
+# METHOD can be "trust", "reject", "md5", "password", "gss", "sspi",
+# "krb5", "ident", "peer", "pam", "ldap", "radius" or "cert".  Note that
+# "password" sends passwords in clear text; "md5" is preferred since
+# it sends encrypted passwords.
+#
+# OPTIONS are a set of options for the authentication in the format
+# NAME=VALUE.  The available options depend on the different
+# authentication methods -- refer to the "Client Authentication"
+# section in the documentation for a list of which options are
+# available for which authentication methods.
+#
+# Database and user names containing spaces, commas, quotes and other
+# special characters must be quoted.  Quoting one of the keywords
+# "all", "sameuser", "samerole" or "replication" makes the name lose
+# its special character, and just match a database or username with
+# that name.
+#
+# This file is read on server startup and when the postmaster receives
+# a SIGHUP signal.  If you edit the file on a running system, you have
+# to SIGHUP the postmaster for the changes to take effect.  You can
+# use "pg_ctl reload" to do that.
+
+# Put your actual configuration here
+# ----------------------------------
+#
+# If you want to allow non-local connections, you need to add more
+# "host" records.  In that case you will also need to make PostgreSQL
+# listen on a non-local interface via the listen_addresses
+# configuration parameter, or via the -i or -h command line switches.
+
+{%- if server.version == '8.4' %}
+
+# Database administrative login by Unix domain socket
+local   all             postgres                                trust
+
+# TYPE  DATABASE        USER            ADDRESS                 METHOD
+
+# "local" is for Unix domain socket connections only
+local   all             all                                     trust
+# IPv4 local connections:
+
+host    all             all             127.0.0.1/32            trust
+host    all             postgres        127.0.0.1/32            trust
+
+# IPv6 local connections:
+host    all             all             ::1/128                 md5
+
+{%- else %}
+
+{%- for client in server.clients %}
+{%- if client != '127.0.0.1' %}
+host    all             all             {{ client }}/32          md5
+{%- endif %}
+{%- endfor %}
+
+# DO NOT DISABLE!
+# If you change this first entry you will need to make sure that the
+# database superuser can access the database using some other method.
+# Noninteractive access to all databases is required during automatic
+# maintenance (custom daily cronjobs, replication, and similar tasks).
+#
+# Database administrative login by Unix domain socket
+local   all             postgres                                peer
+
+# TYPE  DATABASE        USER            ADDRESS                 METHOD
+
+# "local" is for Unix domain socket connections only
+local   all             all                                     peer
+# IPv4 local connections:
+host    all             all             127.0.0.1/32            trust
+
+# IPv6 local connections:
+host    all             all             ::1/128                 md5
+# Allow replication connections from localhost, by a user with the
+# replication privilege.
+#local   replication     postgres                                peer
+#host    replication     postgres        127.0.0.1/32            md5
+#host    replication     postgres        ::1/128                 md5
+
+{%- endif %}
\ No newline at end of file
diff --git a/postgresql/files/pgpass b/postgresql/files/pgpass
new file mode 100644
index 0000000..1ce226d
--- /dev/null
+++ b/postgresql/files/pgpass
@@ -0,0 +1,15 @@
+{%- from "postgresql/map.jinja" import server with context %}
+{%- for client in server.clients %}
+{%- for database in server.get('databases', []) %}
+{{ client }}:{{ server.bind.port }}:{{ database.name }}:{% for user in database.users %}{% if loop.first %}{{ user.name }}:{{ user.password }}{% endif %}{% endfor %}
+{%- endfor %}
+{%- for database_name, database in server.get('database', {}).iteritems() %}
+{{ client }}:{{ server.bind.port }}:{{ database_name }}:{% for user in database.users %}{% if loop.first %}{{ user.name }}:{{ user.password }}{% endif %}{% endfor %}
+{%- endfor %}
+{%- endfor %}
+{%- for database in server.get('databases', []) %}
+localhost:{{ server.bind.port }}:{{ database.name }}:{% for user in database.users %}{% if loop.first %}{{ user.name }}:{{ user.password }}{% endif %}{% endfor %}
+{%- endfor %}
+{%- for database_name, database in server.get('database', {}).iteritems() %}
+localhost:{{ server.bind.port }}:{{ database_name }}:{% for user in database.users %}{% if loop.first %}{{ user.name }}:{{ user.password }}{% endif %}{% endfor %}
+{%- endfor %}
\ No newline at end of file
diff --git a/postgresql/files/restore.sh b/postgresql/files/restore.sh
new file mode 100755
index 0000000..70e2aa0
--- /dev/null
+++ b/postgresql/files/restore.sh
@@ -0,0 +1,45 @@
+#!/bin/sh
+
+cd /root/postgresql
+
+{%- for database in pillar.postgresql.server.get("databases", []) %}
+{%- if database.name == database_name %}
+
+{%- set age = database.initial_data.get("age", "0") %}
+{%- set host = database.initial_data.get("host", grains.id ) %}
+{%- set name = database.initial_data.get("name", database.initial_data.get("database", database.name)) %}
+{%- set source_name = name + ".pg_dump.gz" %}
+{%- set dest_name = database.name + ".pg_dump.gz" %}
+{%- set target = "/root/postgresql/data/" %}
+
+scp backupninja@{{ database.initial_data.source }}:/srv/backupninja/{{ host }}/var/backups/postgresql/postgresql.{{ age }}/{{ source_name }} {{ target }}{{ dest_name }} 
+
+gunzip -d -1 -f {{ target }}{{ dest_name }}
+
+pg_restore /root/postgresql/data/{{ database.name }}.pg_dump --dbname={{ database.name }} --host=localhost --username={{ database.users[0].name }} --no-password -c
+
+touch /root/postgresql/flags/{{ database.name }}-installed
+
+{%- endif %}
+{%- endfor %}
+
+{%- for db_name,database in pillar.postgresql.server.get("database", {}).iteritems() %}
+{%- if db_name == database_name %}
+
+{%- set age = database.initial_data.get("age", "0") %}
+{%- set host = database.initial_data.get("host", grains.id ) %}
+{%- set name = database.initial_data.get("name", database.initial_data.get("database", db_name)) %}
+{%- set source_name = name + ".pg_dump.gz" %}
+{%- set dest_name = db_name + ".pg_dump.gz" %}
+{%- set target = "/root/postgresql/data/" %}
+
+scp backupninja@{{ database.initial_data.source }}:/srv/backupninja/{{ host }}/var/backups/postgresql/postgresql.{{ age }}/{{ source_name }} {{ target }}{{ dest_name }} 
+
+gunzip -d -1 -f {{ target }}{{ dest_name }}
+
+pg_restore /root/postgresql/data/{{ db_name }}.pg_dump --dbname={{ db_name }} --host=localhost --username={{ database.users[0].name }} --no-password -c
+
+touch /root/postgresql/flags/{{ db_name }}-installed
+
+{%- endif %}
+{%- endfor %}
diff --git a/postgresql/files/sensu.conf b/postgresql/files/sensu.conf
new file mode 100644
index 0000000..2db76f8
--- /dev/null
+++ b/postgresql/files/sensu.conf
@@ -0,0 +1,7 @@
+{%- from "postgresql/map.jinja" import server with context -%}
+local_postgresql_server_proc:
+  command: "PATH=$PATH:/usr/lib64/nagios/plugins:/usr/lib/nagios/plugins check_procs -C postgres -u postgres -c 1:30"
+  interval: 60
+  occurrences: 1
+  subscribers:
+  - local-postgresql-server
\ No newline at end of file
diff --git a/postgresql/init.sls b/postgresql/init.sls
new file mode 100644
index 0000000..ce83b89
--- /dev/null
+++ b/postgresql/init.sls
@@ -0,0 +1,5 @@
+
+include:
+{% if pillar.postgresql.server is defined %}
+- postgresql.server
+{% endif %}
diff --git a/postgresql/map.jinja b/postgresql/map.jinja
new file mode 100644
index 0000000..78ab1d3
--- /dev/null
+++ b/postgresql/map.jinja
@@ -0,0 +1,15 @@
+{%- set version = pillar.postgresql.server.get('version', '9.3') %}
+{%- set server = salt['grains.filter_by']({
+    'Debian': {
+        'pkgs': ['postgresql-'+version, 'postgresql-contrib-'+version, 'postgresql-doc-'+version, 'postgresql-server-dev-'+version],
+        'service': 'postgres',
+        'version': version,
+        'gis': False,
+    },
+    'RedHat': {
+        'pkgs': ['postgresql'+version|replace('.', '')+'-server'],
+        'service': 'postgres',
+        'version': version,
+        'gis': False,
+    },
+}, merge=salt['pillar.get']('postgresql:server')) %}
diff --git a/postgresql/server.sls b/postgresql/server.sls
new file mode 100644
index 0000000..07c06f7
--- /dev/null
+++ b/postgresql/server.sls
@@ -0,0 +1,207 @@
+{%- from "postgresql/map.jinja" import server with context %}
+{%- if server.enabled %}
+
+postgresql_packages:
+  pkg.installed:
+  - names: {{ server.pkgs }}
+
+init_postgresql_cluster:
+  cmd.run:
+  - name: pg_createcluster {{ server.version }} main --start
+  - unless: "[ -f /etc/postgresql/{{ server.version }}/main/postgresql.conf ]"
+  - cwd: /root
+  - require:
+    - pkg: postgresql_packages
+
+/etc/postgresql/{{ server.version }}/main/pg_hba.conf:
+  file.managed:
+  - source: salt://postgresql/files/pg_hba.conf
+  - template: jinja
+  - user: postgres
+  - group: postgres
+  - mode: 600
+  - require:
+    - pkg: postgresql_packages
+
+/etc/postgresql/{{ server.version }}/main/postgresql.conf:
+  file.managed:
+  - source: salt://postgresql/files/{{ server.version }}/postgresql.conf
+  - template: jinja
+  - user: postgres
+  - group: postgres
+  - defaults:
+    postgresql_version: {{ server.version }}
+  - mode: 600
+  - require:
+    - pkg: postgresql_packages
+
+/root/.pgpass:
+  file.managed:
+  - source: salt://postgresql/files/pgpass
+  - template: jinja
+  - user: root
+  - group: root
+  - mode: 600
+  - require:
+    - pkg: postgresql_packages
+
+postgresql_service:
+  service.running:
+  - name: postgresql
+  - watch:
+    - file: /etc/postgresql/{{ server.version }}/main/pg_hba.conf
+    - file: /etc/postgresql/{{ server.version }}/main/postgresql.conf
+  - require:
+    - file: /root/.pgpass
+
+postgresql_dirs:
+  file.directory:
+  - names:
+    - /root/postgresql/backup
+    - /root/postgresql/flags
+    - /root/postgresql/data
+    - /root/postgresql/scripts
+  - mode: 700
+  - user: root
+  - group: root
+  - makedirs: true
+  - require:
+    - pkg: postgresql_packages
+
+
+{%- for database in server.get('databases', []) %}
+
+{%- for user in database.users %}
+
+postgresql_user_{{ database.name }}_{{ user.name }}:
+  postgres_user.present:
+  - name: {{ user.name }}
+  - user: postgres
+  {% if user.get('createdb', False) %}
+  - createdb: enabled
+  {% endif %}
+  - password: {{ user.password }}
+  - require:
+    - service: postgresql_service
+
+{%- endfor %}
+
+postgresql_database_{{ database.name }}:
+  postgres_database.present:
+  - name: {{ database.name }}
+  - encoding: {{ database.encoding }}
+  - user: postgres
+  - template: template0
+  - owner: {% for user in database.users %}{% if loop.first %}{{ user.name }}{% endif %}{% endfor %}
+  - require:
+    {%- for user in database.users %}
+    - postgres_user: postgresql_user_{{ database.name }}_{{ user.name }}
+    {%- endfor %}
+
+{% if database.initial_data is defined %}
+
+{%- set engine = database.initial_data.get("engine", "backupninja") %}
+
+/root/postgresql/scripts/restore_{{ database.name }}.sh:
+  file.managed:
+  - source: salt://postgresql/files/restore.sh
+  - mode: 770
+  - template: jinja
+  - defaults:
+    database_name: {{ database.name }}
+  - require: 
+    - file: postgresql_dirs
+    - postgres_database: postgresql_database_{{ database.name }}
+
+restore_postgresql_database_{{ database.name }}:
+  cmd.run:
+  - name: /root/postgresql/scripts/restore_{{ database.name }}.sh
+  - unless: "[ -f /root/postgresql/flags/{{ database.name }}-installed ]"
+  - cwd: /root
+  - require:
+    - file: /root/postgresql/scripts/restore_{{ database.name }}.sh
+
+{% endif %}
+
+{%- endfor %}
+
+{%- for database_name, database in server.get('database', {}).iteritems() %}
+
+{%- for user in database.users %}
+
+postgresql_user_{{ database_name }}_{{ user.name }}:
+  postgres_user.present:
+  - name: {{ user.name }}
+  - user: postgres
+  {% if user.get('createdb', False) %}
+  - createdb: enabled
+  {% endif %}
+  - password: {{ user.password }}
+  - require:
+    - service: postgresql_service
+
+{%- endfor %}
+
+postgresql_database_{{ database_name }}:
+  postgres_database.present:
+  - name: {{ database_name }}
+  - encoding: {{ database.encoding }}
+  - user: postgres
+  - template: template0
+  - owner: {% for user in database.users %}{% if loop.first %}{{ user.name }}{% endif %}{% endfor %}
+  - require:
+    {%- for user in database.users %}
+    - postgres_user: postgresql_user_{{ database_name }}_{{ user.name }}
+    {%- endfor %}
+
+{%- if database.extension is defined %}
+
+postgresql_extensions_packages:
+  pkg.installed:
+  - names:
+    - postgresql-{{ server.version }}-postgis-2.1
+  - skip_suggestions: True
+  - skip_verify: True
+
+{%- endif %}
+
+{%- for extension_name, extension in database.get('extension', {}).iteritems() %}
+
+database_{{ database_name }}_{{ extension_name }}_extension:
+  postgres_extension.present:
+  - name: {{ extension_name }}
+  - maintenance_db: {{ database_name }}
+  - user: postgres
+  - template: template0
+  - require:
+    - postgres_database: postgresql_database_{{ database_name }}
+{%- endfor %}
+
+{% if database.initial_data is defined %}
+
+{%- set engine = database.initial_data.get("engine", "backupninja") %}
+
+/root/postgresql/scripts/restore_{{ database_name }}.sh:
+  file.managed:
+  - source: salt://postgresql/files/restore.sh
+  - mode: 770
+  - template: jinja
+  - defaults:
+    database_name: {{ database_name }}
+  - require: 
+    - file: postgresql_dirs
+    - postgres_database: postgresql_database_{{ database_name }}
+
+restore_postgresql_database_{{ database_name }}:
+  cmd.run:
+  - name: /root/postgresql/scripts/restore_{{ database_name }}.sh
+  - unless: "[ -f /root/postgresql/flags/{{ database_name }}-installed ]"
+  - cwd: /root
+  - require:
+    - file: /root/postgresql/scripts/restore_{{ database_name }}.sh
+
+{% endif %}
+
+{%- endfor %}
+
+{%- endif %}