diff --git a/postgresql/files/9.6/postgresql.conf.Debian b/postgresql/files/9.6/postgresql.conf.Debian
new file mode 100644
index 0000000..11ff7d1
--- /dev/null
+++ b/postgresql/files/9.6/postgresql.conf.Debian
@@ -0,0 +1,651 @@
+{%- from "postgresql/map.jinja" import server with context %}
+
+# -----------------------------
+# PostgreSQL configuration file
+# -----------------------------
+#
+# This file consists of lines of the form:
+#
+#   name = value
+#
+# (The "=" is optional.)  Whitespace may be used.  Comments are introduced with
+# "#" anywhere on a line.  The complete list of parameter names and allowed
+# values can be found in the PostgreSQL documentation.
+#
+# The commented-out settings shown in this file represent the default values.
+# Re-commenting a setting is NOT sufficient to revert it to the default value;
+# you need to reload the server.
+#
+# This file is read on server startup and when the server receives a SIGHUP
+# signal.  If you edit the file on a running system, you have to SIGHUP the
+# server for the changes to take effect, or use "pg_ctl reload".  Some
+# parameters, which are marked below, require a server shutdown and restart to
+# take effect.
+#
+# Any parameter can also be given as a command-line option to the server, e.g.,
+# "postgres -c log_connections=on".  Some parameters can be changed at run time
+# with the "SET" SQL command.
+#
+# Memory units:  kB = kilobytes        Time units:  ms  = milliseconds
+#                MB = megabytes                     s   = seconds
+#                GB = gigabytes                     min = minutes
+#                TB = terabytes                     h   = hours
+#                                                   d   = days
+
+
+#------------------------------------------------------------------------------
+# FILE LOCATIONS
+#------------------------------------------------------------------------------
+
+# The default values of these variables are driven from the -D command-line
+# option or PGDATA environment variable, represented here as ConfigDir.
+
+data_directory = '/var/lib/postgresql/9.6/main'        # use data in another directory
+                         # (change requires restart)
+hba_file = '/etc/postgresql/9.6/main/pg_hba.conf' # host-based authentication file
+                         # (change requires restart)
+ident_file = '/etc/postgresql/9.6/main/pg_ident.conf'  # ident configuration file
+                         # (change requires restart)
+
+# If external_pid_file is not explicitly set, no extra PID file is written.
+external_pid_file = '/var/run/postgresql/9.6-main.pid'           # write an extra PID file
+                         # (change requires restart)
+
+
+#------------------------------------------------------------------------------
+# CONNECTIONS AND AUTHENTICATION
+#------------------------------------------------------------------------------
+
+# - Connection Settings -
+{%- if server.bind.address == '0.0.0.0' %}
+listen_addresses = '*'
+{%- else %}
+listen_addresses = 'localhost'{% if server.bind.address != '127.0.0.1' %}, '{{ bind.address }}'{% endif %}
+{%- endif %}
+port = {{ server.bind.get('port', '5432') }}
+
+#listen_addresses = 'localhost'         # what IP address(es) to listen on;
+                         # comma-separated list of addresses;
+                         # defaults to 'localhost'; use '*' for all
+                         # (change requires restart)
+#port = 5433                   # (change requires restart)
+max_connections = 100              # (change requires restart)
+#superuser_reserved_connections = 3     # (change requires restart)
+unix_socket_directories = '/var/run/postgresql'   # comma-separated list of directories
+                         # (change requires restart)
+#unix_socket_group = ''            # (change requires restart)
+#unix_socket_permissions = 0777         # begin with 0 to use octal notation
+                         # (change requires restart)
+#bonjour = off                # advertise server via Bonjour
+                         # (change requires restart)
+#bonjour_name = ''            # defaults to the computer name
+                         # (change requires restart)
+
+# - Security and Authentication -
+
+#authentication_timeout = 1min          # 1s-600s
+ssl = true                    # (change requires restart)
+#ssl_ciphers = 'HIGH:MEDIUM:+3DES:!aNULL' # allowed SSL ciphers
+                         # (change requires restart)
+#ssl_prefer_server_ciphers = on         # (change requires restart)
+#ssl_ecdh_curve = 'prime256v1'          # (change requires restart)
+ssl_cert_file = '/etc/ssl/certs/ssl-cert-snakeoil.pem'      # (change requires restart)
+ssl_key_file = '/etc/ssl/private/ssl-cert-snakeoil.key'          # (change requires restart)
+#ssl_ca_file = ''             # (change requires restart)
+#ssl_crl_file = ''            # (change requires restart)
+#password_encryption = on
+#db_user_namespace = off
+#row_security = on
+
+# GSSAPI using Kerberos
+#krb_server_keyfile = ''
+#krb_caseins_users = off
+
+# - TCP Keepalives -
+# see "man 7 tcp" for details
+
+#tcp_keepalives_idle = 0      # TCP_KEEPIDLE, in seconds;
+                         # 0 selects the system default
+#tcp_keepalives_interval = 0       # TCP_KEEPINTVL, in seconds;
+                         # 0 selects the system default
+#tcp_keepalives_count = 0          # TCP_KEEPCNT;
+                         # 0 selects the system default
+
+
+#------------------------------------------------------------------------------
+# RESOURCE USAGE (except WAL)
+#------------------------------------------------------------------------------
+
+# - Memory -
+
+shared_buffers = 128MB             # min 128kB
+                         # (change requires restart)
+#huge_pages = try             # on, off, or try
+                         # (change requires restart)
+#temp_buffers = 8MB           # min 800kB
+#max_prepared_transactions = 0          # zero disables the feature
+                         # (change requires restart)
+# Caution: it is not advisable to set max_prepared_transactions nonzero unless
+# you actively intend to use prepared transactions.
+#work_mem = 4MB                    # min 64kB
+#maintenance_work_mem = 64MB       # min 1MB
+#replacement_sort_tuples = 150000  # limits use of replacement selection sort
+#autovacuum_work_mem = -1          # min 1MB, or -1 to use maintenance_work_mem
+#max_stack_depth = 2MB             # min 100kB
+dynamic_shared_memory_type = posix # the default is the first option
+                         # supported by the operating system:
+                         #   posix
+                         #   sysv
+                         #   windows
+                         #   mmap
+                         # use none to disable dynamic shared memory
+
+# - Disk -
+
+#temp_file_limit = -1              # limits per-process temp file space
+                         # in kB, or -1 for no limit
+
+# - Kernel Resource Usage -
+
+#max_files_per_process = 1000      # min 25
+                         # (change requires restart)
+#shared_preload_libraries = ''          # (change requires restart)
+
+# - Cost-Based Vacuum Delay -
+
+#vacuum_cost_delay = 0             # 0-100 milliseconds
+#vacuum_cost_page_hit = 1          # 0-10000 credits
+#vacuum_cost_page_miss = 10        # 0-10000 credits
+#vacuum_cost_page_dirty = 20       # 0-10000 credits
+#vacuum_cost_limit = 200      # 1-10000 credits
+
+# - Background Writer -
+
+#bgwriter_delay = 200ms            # 10-10000ms between rounds
+#bgwriter_lru_maxpages = 100       # 0-1000 max buffers written/round
+#bgwriter_lru_multiplier = 2.0          # 0-10.0 multiplier on buffers scanned/round
+#bgwriter_flush_after = 0          # 0 disables,
+                         # default is 512kB on linux, 0 otherwise
+
+# - Asynchronous Behavior -
+
+#effective_io_concurrency = 1      # 1-1000; 0 disables prefetching
+#max_worker_processes = 8          # (change requires restart)
+#max_parallel_workers_per_gather = 0    # taken from max_worker_processes
+#old_snapshot_threshold = -1       # 1min-60d; -1 disables; 0 is immediate
+                                             # (change requires restart)
+#backend_flush_after = 0      # 0 disables, default is 0
+
+
+#------------------------------------------------------------------------------
+# WRITE AHEAD LOG
+#------------------------------------------------------------------------------
+
+# - Settings -
+
+#wal_level = minimal               # minimal, replica, or logical
+                         # (change requires restart)
+#fsync = on                   # flush data to disk for crash safety
+                              # (turning this off can cause
+                              # unrecoverable data corruption)
+#synchronous_commit = on      # synchronization level;
+                         # off, local, remote_write, remote_apply, or on
+#wal_sync_method = fsync      # the default is the first option
+                         # supported by the operating system:
+                         #   open_datasync
+                         #   fdatasync (default on Linux)
+                         #   fsync
+                         #   fsync_writethrough
+                         #   open_sync
+#full_page_writes = on             # recover from partial page writes
+#wal_compression = off             # enable compression of full-page writes
+#wal_log_hints = off               # also do full page writes of non-critical updates
+                         # (change requires restart)
+#wal_buffers = -1             # min 32kB, -1 sets based on shared_buffers
+                         # (change requires restart)
+#wal_writer_delay = 200ms          # 1-10000 milliseconds
+#wal_writer_flush_after = 1MB      # 0 disables
+
+#commit_delay = 0             # range 0-100000, in microseconds
+#commit_siblings = 5               # range 1-1000
+
+# - Checkpoints -
+
+#checkpoint_timeout = 5min         # range 30s-1d
+#max_wal_size = 1GB
+#min_wal_size = 80MB
+#checkpoint_completion_target = 0.5     # checkpoint target duration, 0.0 - 1.0
+#checkpoint_flush_after = 0        # 0 disables,
+                         # default is 256kB on linux, 0 otherwise
+#checkpoint_warning = 30s          # 0 disables
+
+# - Archiving -
+
+#archive_mode = off      # enables archiving; off, on, or always
+                    # (change requires restart)
+#archive_command = ''         # command to use to archive a logfile segment
+                    # placeholders: %p = path of file to archive
+                    #               %f = file name only
+                    # e.g. 'test ! -f /mnt/server/archivedir/%f && cp %p /mnt/server/archivedir/%f'
+#archive_timeout = 0          # force a logfile segment switch after this
+                    # number of seconds; 0 disables
+
+
+#------------------------------------------------------------------------------
+# REPLICATION
+#------------------------------------------------------------------------------
+
+# - Sending Server(s) -
+
+# Set these on the master and on any standby that will send replication data.
+
+#max_wal_senders = 0          # max number of walsender processes
+                    # (change requires restart)
+#wal_keep_segments = 0        # in logfile segments, 16MB each; 0 disables
+#wal_sender_timeout = 60s     # in milliseconds; 0 disables
+
+#max_replication_slots = 0    # max number of replication slots
+                    # (change requires restart)
+#track_commit_timestamp = off # collect timestamp of transaction commit
+                    # (change requires restart)
+
+# - Master Server -
+
+# These settings are ignored on a standby server.
+
+#synchronous_standby_names = ''    # standby servers that provide sync rep
+                    # number of sync standbys and comma-separated list of application_name
+                    # from standby(s); '*' = all
+#vacuum_defer_cleanup_age = 0 # number of xacts by which cleanup is delayed
+
+# - Standby Servers -
+
+# These settings are ignored on a master server.
+
+#hot_standby = off            # "on" allows queries during recovery
+                         # (change requires restart)
+#max_standby_archive_delay = 30s   # max delay before canceling queries
+                         # when reading WAL from archive;
+                         # -1 allows indefinite delay
+#max_standby_streaming_delay = 30s # max delay before canceling queries
+                         # when reading streaming WAL;
+                         # -1 allows indefinite delay
+#wal_receiver_status_interval = 10s     # send replies at least this often
+                         # 0 disables
+#hot_standby_feedback = off        # send info from standby to prevent
+                         # query conflicts
+#wal_receiver_timeout = 60s        # time that receiver waits for
+                         # communication from master
+                         # in milliseconds; 0 disables
+#wal_retrieve_retry_interval = 5s  # time to wait before retrying to
+                         # retrieve WAL after a failed attempt
+
+
+#------------------------------------------------------------------------------
+# QUERY TUNING
+#------------------------------------------------------------------------------
+
+# - Planner Method Configuration -
+
+#enable_bitmapscan = on
+#enable_hashagg = on
+#enable_hashjoin = on
+#enable_indexscan = on
+#enable_indexonlyscan = on
+#enable_material = on
+#enable_mergejoin = on
+#enable_nestloop = on
+#enable_seqscan = on
+#enable_sort = on
+#enable_tidscan = on
+
+# - Planner Cost Constants -
+
+#seq_page_cost = 1.0               # measured on an arbitrary scale
+#random_page_cost = 4.0            # same scale as above
+#cpu_tuple_cost = 0.01             # same scale as above
+#cpu_index_tuple_cost = 0.005      # same scale as above
+#cpu_operator_cost = 0.0025        # same scale as above
+#parallel_tuple_cost = 0.1         # same scale as above
+#parallel_setup_cost = 1000.0 # same scale as above
+#min_parallel_relation_size = 8MB
+#effective_cache_size = 4GB
+
+# - Genetic Query Optimizer -
+
+#geqo = on
+#geqo_threshold = 12
+#geqo_effort = 5              # range 1-10
+#geqo_pool_size = 0           # selects default based on effort
+#geqo_generations = 0              # selects default based on effort
+#geqo_selection_bias = 2.0         # range 1.5-2.0
+#geqo_seed = 0.0              # range 0.0-1.0
+
+# - Other Planner Options -
+
+#default_statistics_target = 100   # range 1-10000
+#constraint_exclusion = partition  # on, off, or partition
+#cursor_tuple_fraction = 0.1       # range 0.0-1.0
+#from_collapse_limit = 8
+#join_collapse_limit = 8      # 1 disables collapsing of explicit
+                         # JOIN clauses
+#force_parallel_mode = off
+
+
+#------------------------------------------------------------------------------
+# ERROR REPORTING AND LOGGING
+#------------------------------------------------------------------------------
+
+# - Where to Log -
+
+#log_destination = 'stderr'        # Valid values are combinations of
+                         # stderr, csvlog, syslog, and eventlog,
+                         # depending on platform.  csvlog
+                         # requires logging_collector to be on.
+
+# This is used when logging to stderr:
+#logging_collector = off      # Enable capturing of stderr and csvlog
+                         # into log files. Required to be on for
+                         # csvlogs.
+                         # (change requires restart)
+
+# These are only used if logging_collector is on:
+#log_directory = 'pg_log'          # directory where log files are written,
+                         # can be absolute or relative to PGDATA
+#log_filename = 'postgresql-%Y-%m-%d_%H%M%S.log'  # log file name pattern,
+                         # can include strftime() escapes
+#log_file_mode = 0600              # creation mode for log files,
+                         # begin with 0 to use octal notation
+#log_truncate_on_rotation = off         # If on, an existing log file with the
+                         # same name as the new log file will be
+                         # truncated rather than appended to.
+                         # But such truncation only occurs on
+                         # time-driven rotation, not on restarts
+                         # or size-driven rotation.  Default is
+                         # off, meaning append to existing files
+                         # in all cases.
+#log_rotation_age = 1d             # Automatic rotation of logfiles will
+                         # happen after that time.  0 disables.
+#log_rotation_size = 10MB          # Automatic rotation of logfiles will
+                         # happen after that much log output.
+                         # 0 disables.
+
+# These are relevant when logging to syslog:
+#syslog_facility = 'LOCAL0'
+#syslog_ident = 'postgres'
+#syslog_sequence_numbers = on
+#syslog_split_messages = on
+
+# This is only relevant when logging to eventlog (win32):
+#event_source = 'PostgreSQL'
+
+# - When to Log -
+
+#client_min_messages = notice      # values in order of decreasing detail:
+                         #   debug5
+                         #   debug4
+                         #   debug3
+                         #   debug2
+                         #   debug1
+                         #   log
+                         #   notice
+                         #   warning
+                         #   error
+
+#log_min_messages = warning        # values in order of decreasing detail:
+                         #   debug5
+                         #   debug4
+                         #   debug3
+                         #   debug2
+                         #   debug1
+                         #   info
+                         #   notice
+                         #   warning
+                         #   error
+                         #   log
+                         #   fatal
+                         #   panic
+
+#log_min_error_statement = error   # values in order of decreasing detail:
+                         #   debug5
+                         #   debug4
+                         #   debug3
+                         #   debug2
+                         #   debug1
+                         #   info
+                         #   notice
+                         #   warning
+                         #   error
+                         #   log
+                         #   fatal
+                         #   panic (effectively off)
+
+#log_min_duration_statement = -1   # -1 is disabled, 0 logs all statements
+                         # and their durations, > 0 logs only
+                         # statements running at least this number
+                         # of milliseconds
+
+
+# - What to Log -
+
+#debug_print_parse = off
+#debug_print_rewritten = off
+#debug_print_plan = off
+#debug_pretty_print = on
+#log_checkpoints = off
+#log_connections = off
+#log_disconnections = off
+#log_duration = off
+#log_error_verbosity = default          # terse, default, or verbose messages
+#log_hostname = off
+log_line_prefix = '%t [%p-%l] %q%u@%d '           # special values:
+                         #   %a = application name
+                         #   %u = user name
+                         #   %d = database name
+                         #   %r = remote host and port
+                         #   %h = remote host
+                         #   %p = process ID
+                         #   %t = timestamp without milliseconds
+                         #   %m = timestamp with milliseconds
+                         #   %n = timestamp with milliseconds (as a Unix epoch)
+                         #   %i = command tag
+                         #   %e = SQL state
+                         #   %c = session ID
+                         #   %l = session line number
+                         #   %s = session start timestamp
+                         #   %v = virtual transaction ID
+                         #   %x = transaction ID (0 if none)
+                         #   %q = stop here in non-session
+                         #        processes
+                         #   %% = '%'
+                         # e.g. '<%u%%%d> '
+#log_lock_waits = off              # log lock waits >= deadlock_timeout
+#log_statement = 'none'            # none, ddl, mod, all
+#log_replication_commands = off
+#log_temp_files = -1               # log temporary files equal or larger
+                         # than the specified size in kilobytes;
+                         # -1 disables, 0 logs all temp files
+log_timezone = 'localtime'
+
+
+# - Process Title -
+
+#cluster_name = ''            # added to process titles if nonempty
+                         # (change requires restart)
+#update_process_title = on
+
+
+#------------------------------------------------------------------------------
+# RUNTIME STATISTICS
+#------------------------------------------------------------------------------
+
+# - Query/Index Statistics Collector -
+
+#track_activities = on
+#track_counts = on
+#track_io_timing = off
+#track_functions = none            # none, pl, all
+#track_activity_query_size = 1024  # (change requires restart)
+stats_temp_directory = '/var/run/postgresql/9.6-main.pg_stat_tmp'
+
+
+# - Statistics Monitoring -
+
+#log_parser_stats = off
+#log_planner_stats = off
+#log_executor_stats = off
+#log_statement_stats = off
+
+
+#------------------------------------------------------------------------------
+# AUTOVACUUM PARAMETERS
+#------------------------------------------------------------------------------
+
+#autovacuum = on              # Enable autovacuum subprocess?  'on'
+                         # requires track_counts to also be on.
+#log_autovacuum_min_duration = -1  # -1 disables, 0 logs all actions and
+                         # their durations, > 0 logs only
+                         # actions running at least this number
+                         # of milliseconds.
+#autovacuum_max_workers = 3        # max number of autovacuum subprocesses
+                         # (change requires restart)
+#autovacuum_naptime = 1min         # time between autovacuum runs
+#autovacuum_vacuum_threshold = 50  # min number of row updates before
+                         # vacuum
+#autovacuum_analyze_threshold = 50 # min number of row updates before
+                         # analyze
+#autovacuum_vacuum_scale_factor = 0.2   # fraction of table size before vacuum
+#autovacuum_analyze_scale_factor = 0.1  # fraction of table size before analyze
+#autovacuum_freeze_max_age = 200000000  # maximum XID age before forced vacuum
+                         # (change requires restart)
+#autovacuum_multixact_freeze_max_age = 400000000  # maximum multixact age
+                         # before forced vacuum
+                         # (change requires restart)
+#autovacuum_vacuum_cost_delay = 20ms    # default vacuum cost delay for
+                         # autovacuum, in milliseconds;
+                         # -1 means use vacuum_cost_delay
+#autovacuum_vacuum_cost_limit = -1 # default vacuum cost limit for
+                         # autovacuum, -1 means use
+                         # vacuum_cost_limit
+
+
+#------------------------------------------------------------------------------
+# CLIENT CONNECTION DEFAULTS
+#------------------------------------------------------------------------------
+
+# - Statement Behavior -
+
+#search_path = '"$user", public'   # schema names
+#default_tablespace = ''      # a tablespace name, '' uses the default
+#temp_tablespaces = ''             # a list of tablespace names, '' uses
+                         # only default tablespace
+#check_function_bodies = on
+#default_transaction_isolation = 'read committed'
+#default_transaction_read_only = off
+#default_transaction_deferrable = off
+#session_replication_role = 'origin'
+#statement_timeout = 0             # in milliseconds, 0 is disabled
+#lock_timeout = 0             # in milliseconds, 0 is disabled
+#idle_in_transaction_session_timeout = 0          # in milliseconds, 0 is disabled
+#vacuum_freeze_min_age = 50000000
+#vacuum_freeze_table_age = 150000000
+#vacuum_multixact_freeze_min_age = 5000000
+#vacuum_multixact_freeze_table_age = 150000000
+#bytea_output = 'hex'              # hex, escape
+#xmlbinary = 'base64'
+#xmloption = 'content'
+#gin_fuzzy_search_limit = 0
+#gin_pending_list_limit = 4MB
+
+# - Locale and Formatting -
+
+datestyle = 'iso, mdy'
+#intervalstyle = 'postgres'
+timezone = 'localtime'
+#timezone_abbreviations = 'Default'     # Select the set of available time zone
+                         # abbreviations.  Currently, there are
+                         #   Default
+                         #   Australia (historical usage)
+                         #   India
+                         # You can create your own file in
+                         # share/timezonesets/.
+#extra_float_digits = 0            # min -15, max 3
+#client_encoding = sql_ascii       # actually, defaults to database
+                         # encoding
+
+# These settings are initialized by initdb, but they can be changed.
+lc_messages = 'en_US.UTF-8'             # locale for system error message
+                         # strings
+lc_monetary = 'en_US.UTF-8'             # locale for monetary formatting
+lc_numeric = 'en_US.UTF-8'              # locale for number formatting
+lc_time = 'en_US.UTF-8'                 # locale for time formatting
+
+# default configuration for text search
+default_text_search_config = 'pg_catalog.english'
+
+# - Other Defaults -
+
+#dynamic_library_path = '$libdir'
+#local_preload_libraries = ''
+#session_preload_libraries = ''
+
+
+#------------------------------------------------------------------------------
+# LOCK MANAGEMENT
+#------------------------------------------------------------------------------
+
+#deadlock_timeout = 1s
+#max_locks_per_transaction = 64         # min 10
+                         # (change requires restart)
+#max_pred_locks_per_transaction = 64    # min 10
+                         # (change requires restart)
+
+
+#------------------------------------------------------------------------------
+# VERSION/PLATFORM COMPATIBILITY
+#------------------------------------------------------------------------------
+
+# - Previous PostgreSQL Versions -
+
+#array_nulls = on
+#backslash_quote = safe_encoding   # on, off, or safe_encoding
+#default_with_oids = off
+#escape_string_warning = on
+#lo_compat_privileges = off
+#operator_precedence_warning = off
+#quote_all_identifiers = off
+#sql_inheritance = on
+#standard_conforming_strings = on
+#synchronize_seqscans = on
+
+# - Other Platforms and Clients -
+
+#transform_null_equals = off
+
+
+#------------------------------------------------------------------------------
+# ERROR HANDLING
+#------------------------------------------------------------------------------
+
+#exit_on_error = off               # terminate session on any error?
+#restart_after_crash = on          # reinitialize after backend crash?
+
+
+#------------------------------------------------------------------------------
+# CONFIG FILE INCLUDES
+#------------------------------------------------------------------------------
+
+# These options allow settings to be loaded from files other than the
+# default postgresql.conf.
+
+#include_dir = 'conf.d'            # include files ending in '.conf' from
+                         # directory 'conf.d'
+#include_if_exists = 'exists.conf' # include file only if it exists
+#include = 'special.conf'          # include file
+
+
+#------------------------------------------------------------------------------
+# CUSTOMIZED OPTIONS
+#------------------------------------------------------------------------------
+
+# Add settings for extensions here
diff --git a/postgresql/map.jinja b/postgresql/map.jinja
index 2a6aefa..649aeee 100644
--- a/postgresql/map.jinja
+++ b/postgresql/map.jinja
@@ -11,7 +11,7 @@
 {%- set version_numbers = version|replace('.', '') %}
 {%- set server = salt['grains.filter_by']({
     'Debian': {
-        'pkgs': ['postgresql-'+version, 'postgresql-contrib-'+version, 'postgresql-doc-'+version, 'postgresql-server-dev-'+version],
+        'pkgs': ['postgresql-'+version, 'postgresql-contrib-'+version, 'postgresql-doc-'+version],
         'service': 'postgresql',
         'version': version,
         'init_command': 'pg_createcluster '+version+' main --start',