diff --git a/README.rst b/README.rst
index c3e66df..b936776 100644
--- a/README.rst
+++ b/README.rst
@@ -735,6 +735,43 @@
           token: none
         ...
 
+XMPP Encryption
+---------------
+
+Configure encryption of XMPP
+
+Computes nodes
+~~~~~~~~~~~~~~
+
+.. code-block:: yaml
+
+  opencontrail:
+    compute:
+      xmpp:
+        tls:
+          enabled: False
+          auth:
+            enabled: False
+          (optional) cert_file: /etc/contrail/server.pem
+          (optional) key_file: /etc/contrail/privkey.pem
+          (optional) ca_cert_file: /etc/contrail/ca-cert.pem
+
+Control nodes
+~~~~~~~~~~~~~
+
+.. code-block:: yaml
+
+  opencontrail:
+    control:
+      xmpp:
+        tls:
+          enabled: False
+          auth:
+            enabled: False
+          (optional) cert_file: /etc/contrail/server.pem
+          (optional) key_file: /etc/contrail/privkey.pem
+          (optional) ca_cert_file: /etc/contrail/ca-cert.pem
+
 Kubernetes support
 ------------------
 
diff --git a/_modules/contrail.py b/_modules/contrail.py
index 777c686..c9741e3 100644
--- a/_modules/contrail.py
+++ b/_modules/contrail.py
@@ -702,7 +702,7 @@
     vnc_client = _auth(**kwargs)
     vrouter_conf_objs = vnc_client._objects_list('global-vrouter-config', detail=True)
     for vrouter_conf_obj in vrouter_conf_objs:
-        ret[vrouter_conf_obj._display_name] = vrouter_conf_obj.__dict__
+        ret[vrouter_conf_obj.name] = vrouter_conf_obj.__dict__
     return ret
 
 
diff --git a/opencontrail/common.sls b/opencontrail/common.sls
index 76d2ec9..4a782fc 100644
--- a/opencontrail/common.sls
+++ b/opencontrail/common.sls
@@ -123,13 +123,3 @@
 {%- endif %}
 
 {%- endif %}
-
-{%- if common.version == 4.0 and common.contrainer_folders is defined %}
-{%- for dir in common.contrainer_folders %}
-{{ dir }}:
-  file.directory:
-    - user: root
-    - group: root
-    - makedirs: true
-{%- endfor %}
-{%- endif %}
diff --git a/opencontrail/database.sls b/opencontrail/database.sls
index 89c79e2..1a0a74f 100644
--- a/opencontrail/database.sls
+++ b/opencontrail/database.sls
@@ -4,7 +4,7 @@
 include:
 - opencontrail.common
 
-{% if database.cassandra.version == 1 %}
+{% if database.cassandra_version == 1 %}
 
 {{ database.cassandra_config }}cassandra.yaml:
   file.managed:
@@ -29,7 +29,7 @@
 
 {{ database.cassandra_config }}cassandra.yaml:
   file.managed:
-  - source: salt://opencontrail/files/{{ database.version }}/cassandra.yaml
+  - source: salt://opencontrail/files/cassandra/{{ database.cassandra_version }}/cassandra.yaml
   - template: jinja
   - makedirs: True
 {% if grains.os_family == "RedHat" %}
@@ -41,7 +41,7 @@
 
 {{ database.cassandra_config }}cassandra_analytics.yaml:
   file.managed:
-  - source: salt://opencontrail/files/{{ database.version }}/cassandra_analytics.yaml
+  - source: salt://opencontrail/files/cassandra/{{ database.cassandra_version }}/cassandra_analytics.yaml
   - template: jinja
   - makedirs: True
 {% if grains.os_family == "RedHat" %}
@@ -49,15 +49,23 @@
     - pkg: opencontrail_database_packages
 {% endif %}
 
+{% if database.version >= 4.1 %}
+/etc/kafka/consumer.properties:
+{%- else %}
 /usr/share/kafka/config/consumer.properties:
+{% endif %}
   file.managed:
-  - source: salt://opencontrail/files/{{ database.version }}/consumer.properties
+  - source: salt://opencontrail/files/kafka/{{ database.kafka_version }}/consumer.properties
   - template: jinja
   - makedirs: true
 
+{% if database.version >= 4.1 %}
+/etc/kafka/zookeeper.properties:
+{%- else %}
 /usr/share/kafka/config/zookeeper.properties:
+{% endif %}
   file.managed:
-  - source: salt://opencontrail/files/{{ database.version }}/zookeeper.properties
+  - source: salt://opencontrail/files/kafka/{{ database.kafka_version }}/zookeeper.properties
   - template: jinja
   - makedirs: true
 
@@ -89,7 +97,7 @@
 
 {{ database.cassandra_config }}cassandra-env.sh:
   file.managed:
-  - source: salt://opencontrail/files/{{ database.version }}/database/cassandra-env.sh
+  - source: salt://opencontrail/files/cassandra/{{ database.cassandra_version }}/cassandra-env.sh
   - template: jinja
   - makedirs: True
 {% if grains.os_family == "RedHat" %}
@@ -100,7 +108,7 @@
 {% if database.version >= 4.0 %}
 {{ database.cassandra_config }}cassandra-env-analytics.sh:
   file.managed:
-  - source: salt://opencontrail/files/{{ database.version }}/database/cassandra-env-analytics.sh
+  - source: salt://opencontrail/files/cassandra/{{ database.cassandra_version }}/cassandra-env-analytics.sh
   - template: jinja
   - makedirs: True
 {% if grains.os_family == "RedHat" %}
@@ -132,7 +140,11 @@
     - /etc/zookeeper/conf/zoo.cfg
     - /etc/default/zookeeper
     {%- if database.version >= 3.0 %}
+    {%- if database.version < 4.1 %}
     - /usr/share/kafka/config/server.properties
+    {%- else %}
+    - /etc/kafka/server.properties
+    {%- endif %}
     {%- if database.version < 4.0 or grains.get('init') != 'systemd' %}
     - /etc/contrail/supervisord_database_files/contrail-database-nodemgr.ini
     {%- endif %}
@@ -188,9 +200,13 @@
 
 {%- if database.version >= 3.0 %}
 
+{%- if database.version < 4.1 %}
 /usr/share/kafka/config/server.properties:
+{%- else %}
+/etc/kafka/server.properties:
+{%- endif %}
   file.managed:
-  - source: salt://opencontrail/files/{{ database.version }}/server.properties
+  - source: salt://opencontrail/files/kafka/{{ database.kafka_version }}/server.properties
   - template: jinja
   - makedirs: true
 
@@ -263,7 +279,11 @@
     - file: /etc/zookeeper/conf/log4j.properties
     - file: /var/lib/cassandra/data
     - file: /etc/contrail/supervisord_database_files/contrail-database-nodemgr.ini
+    {%- if database.version < 4.1 %}
     - file: /usr/share/kafka/config/server.properties
+    {%- else %}
+    - file: /etc/kafka/server.properties
+    {%- endif %}
 
 opencontrail_zookeeper_service:
   service.running:
@@ -277,7 +297,11 @@
     - file: /etc/default/zookeeper
     - file: /etc/zookeeper/conf/log4j.properties
     - file: /etc/contrail/supervisord_database_files/contrail-database-nodemgr.ini
+    {%- if database.version < 4.1 %}
     - file: /usr/share/kafka/config/server.properties
+    {%- else %}
+    - file: /etc/kafka/server.properties
+    {%- endif %}
 
 {%- if grains.get('virtual_subtype', None) == "Docker" %}
 
@@ -315,7 +339,11 @@
       - file: /etc/contrail/contrail-database-nodemgr.conf
       - file: /var/lib/zookeeper/myid
       - file: /etc/zookeeper/conf/log4j.properties
+    {%- if database.version < 4.1 %}
       - file: /usr/share/kafka/config/server.properties
+    {%- else %}
+      - file: /etc/kafka/server.properties
+    {%- endif %}
 {%- endif %}
 
 {%- endif %}
diff --git a/opencontrail/files/3.0/contrail-control.conf b/opencontrail/files/3.0/contrail-control.conf
index cfcc314..1889a70 100644
--- a/opencontrail/files/3.0/contrail-control.conf
+++ b/opencontrail/files/3.0/contrail-control.conf
@@ -10,7 +10,7 @@
 # bgp_port=179
 # collectors= # Provided by discovery server
   hostip={{ control.bind.address }} # Resolved IP of `hostname`
-  #hostname=ctl-oc-1 # Retrieved as `hostname` 
+  #hostname=ctl-oc-1 # Retrieved as `hostname`
   {%- if control.name is defined %}
   hostname={{ control.name }}
   {%- else %}
@@ -25,11 +25,11 @@
   log_level=SYS_NOTICE
   log_local=1
 # test_mode=0
-{%- if pillar.get('salt', {}).get('minion', {}).get('cert', {}).opencontrail_xmpp is defined %}
-xmpp_auth_enable=true
-xmpp_server_cert={{ pillar.salt.minion.cert.opencontrail_xmpp.get('cert_file', '/etc/contrail/ssl/certs/server.pem') }}
-xmpp_server_key={{ pillar.salt.minion.cert.opencontrail_xmpp.get('key_file', '/etc/contrail/ssl/private/server-privkey.pem') }}
-xmpp_ca_cert={{ pillar.salt.minion.cert.opencontrail_xmpp.get('ca_file', '/etc/contrail/ssl/certs/ca-cert.pem') }}
+{%- if control.xmpp.tls.enabled %}
+xmpp_auth_enable = {{ control.xmpp.tls.auth.enabled }}
+xmpp_server_cert = {{ control.xmpp.tls.cert_file }}
+xmpp_server_key = {{ control.xmpp.tls.key_file }}
+xmpp_ca_cert = {{ control.xmpp.tls.ca_cert_file }}
 {%- endif %}
 
 [DISCOVERY]
diff --git a/opencontrail/files/3.0/contrail-vrouter-agent.conf b/opencontrail/files/3.0/contrail-vrouter-agent.conf
index b7e861e..219561a 100644
--- a/opencontrail/files/3.0/contrail-vrouter-agent.conf
+++ b/opencontrail/files/3.0/contrail-vrouter-agent.conf
@@ -91,13 +91,12 @@
 gateway_mode={{ compute.gateway_mode }}
 {%- endif %}
 
-{%- if pillar.get('salt', {}).get('minion', {}).get('cert', {}).opencontrail_xmpp is defined %}
-xmpp_auth_enable=true
-xmpp_server_cert={{ pillar.salt.minion.cert.opencontrail_xmpp.get('cert_file', '/etc/contrail/ssl/certs/server.pem') }}
-xmpp_server_key={{ pillar.salt.minion.cert.opencontrail_xmpp.get('key_file', '/etc/contrail/ssl/private/server-privkey.pem') }}
-xmpp_ca_cert={{ pillar.salt.minion.cert.opencontrail_xmpp.get('ca_file', '/etc/contrail/ssl/certs/ca-cert.pem') }}
+{%- if compute.xmpp.tls.enabled %}
+xmpp_auth_enable = {{ compute.xmpp.tls.auth.enabled }}
+xmpp_server_cert = {{ compute.xmpp.tls.cert_file }}
+xmpp_server_key = {{ compute.xmpp.tls.key_file }}
+xmpp_ca_cert = {{ compute.xmpp.tls.ca_cert_file }}
 {%- endif %}
-
 [DISCOVERY]
 # If COLLECTOR and/or CONTROL-NODE and/or DNS is not specified this section is
 # mandatory. Else this section is optional
diff --git a/opencontrail/files/4.0/contrail-alarm-gen.conf b/opencontrail/files/4.0/contrail-alarm-gen.conf
index 87ada20..b5d7cff 100644
--- a/opencontrail/files/4.0/contrail-alarm-gen.conf
+++ b/opencontrail/files/4.0/contrail-alarm-gen.conf
@@ -10,6 +10,10 @@
 kafka_broker_list = {% for member in collector.database.members %}{{ member.host }}:9092 {% endfor %}
 partitions=30
 zk_list = {% for member in collector.database.members %}{{ member.host }}:2182 {% endfor %}
+{%- if collector.version >= 4.1 %}
+
+[CONFIGDB]
+{%- endif %}
 #rabbitmq_server_list = xx.xx.xx.xx
 {%- if collector.get('message_queue', {}).members is defined %}
 rabbitmq_server_list={{ collector.message_queue.members | join(',', attribute='host') }}
@@ -21,11 +25,17 @@
 rabbitmq_user={{ collector.get('message_queue', {}).get('user', 'guest') }}
 rabbitmq_password={{ collector.get('message_queue', {}).get('password', 'guest') }}
 rabbitmq_vhost={{ collector.get('message_queue', {}).get('vhost', '') }}
+{%- if collector.version >= 4.1 %}
+config_db_server_list={% for member in collector.get('config', {}).get('members', {}) %}{{ member.host }}:9161 {% endfor %}
+#config_db_username=
+#config_db_password=
+{% else %}
 
 [API_SERVER]
 # List of api-servers in ip:port format separated by space
 api_server_list={% for member in collector.config.members %}{{ member.host }}:9100 {% endfor %}
 #api_server_use_ssl=False
+{%- endif %}
 
 [REDIS]
 redis_server_port=6379
diff --git a/opencontrail/files/4.0/contrail-collector.conf b/opencontrail/files/4.0/contrail-collector.conf
index a8c8136..f7beae2 100644
--- a/opencontrail/files/4.0/contrail-collector.conf
+++ b/opencontrail/files/4.0/contrail-collector.conf
@@ -82,10 +82,26 @@
 # number of kafka partitions
 # kafka_partitions=30
 
+{%- if collector.version >= 4.1 %}
+[CONFIGDB]
+#rabbitmq_server_list = xx.xx.xx.xx
+{%- if collector.get('message_queue', {}).members is defined %}
+rabbitmq_server_list={% for member in collector.message_queue.members -%}{{ member.host }}:{{ member.get('port', 5672) }} {% endfor %}
+{%- elif collector.get('message_queue', {}).host is defined %}
+rabbitmq_server_list={{ collector.message_queue.host }}:{{ collector.message_queue.get('port', 5672) }}
+{%- endif %}
+rabbitmq_user={{ collector.get('message_queue', {}).get('user', 'guest') }}
+rabbitmq_password={{ collector.get('message_queue', {}).get('password', 'guest') }}
+rabbitmq_vhost={{ collector.get('message_queue', {}).get('vhost', '') }}
+config_db_server_list={% for member in collector.get('config', {}).get('members', {}) %}{{ member.host }}:9041 {% endfor %}
+#config_db_username=
+#config_db_password=
+{% else %}
 [API_SERVER]
 # List of api-servers in ip:port format separated by space
 api_server_list={% for member in collector.config.members %}{{ member.host }}:9100 {% endfor %}
 # api_server_use_ssl=False
+{%- endif %}
 
 [DATABASE]
 # disk usage percentage
diff --git a/opencontrail/files/4.0/contrail-control.conf b/opencontrail/files/4.0/contrail-control.conf
index 19bf68b..ed67242 100644
--- a/opencontrail/files/4.0/contrail-control.conf
+++ b/opencontrail/files/4.0/contrail-control.conf
@@ -27,13 +27,12 @@
 log_level=SYS_NOTICE
 log_local=1
 # test_mode=0
-{%- if pillar.get('salt', {}).get('minion', {}).get('cert', {}).opencontrail_xmpp is defined %}
-xmpp_auth_enable=true
-xmpp_server_cert={{ pillar.salt.minion.cert.opencontrail_xmpp.get('cert_file', '/etc/contrail/ssl/certs/server.pem') }}
-xmpp_server_key={{ pillar.salt.minion.cert.opencontrail_xmpp.get('key_file', '/etc/contrail/ssl/private/server-privkey.pem') }}
-xmpp_ca_cert={{ pillar.salt.minion.cert.opencontrail_xmpp.get('ca_file', '/etc/contrail/ssl/certs/ca-cert.pem') }}
+{%- if control.xmpp.tls.enabled %}
+xmpp_auth_enable = {{ control.xmpp.tls.auth.enabled }}
+xmpp_server_cert = {{ control.xmpp.tls.cert_file }}
+xmpp_server_key = {{ control.xmpp.tls.key_file }}
+xmpp_ca_cert = {{ control.xmpp.tls.ca_cert_file }}
 {%- endif %}
-
 # Sandesh send rate limit can be used to throttle system logs transmitted per
 # second. System logs are dropped if the sending rate is exceeded
 # sandesh_send_rate_limit=
diff --git a/opencontrail/files/4.0/contrail-vrouter-agent.conf b/opencontrail/files/4.0/contrail-vrouter-agent.conf
index 6724afa..3d244cc 100644
--- a/opencontrail/files/4.0/contrail-vrouter-agent.conf
+++ b/opencontrail/files/4.0/contrail-vrouter-agent.conf
@@ -60,7 +60,7 @@
 # Local log file name
 log_file=/var/log/contrail/contrail-vrouter-agent.log
 
-# Log severity levels. Possible values are SYS_EMERG, SYS_ALERT, SYS_CRIT, 
+# Log severity levels. Possible values are SYS_EMERG, SYS_ALERT, SYS_CRIT,
 # SYS_ERR, SYS_WARN, SYS_NOTICE, SYS_INFO and SYS_DEBUG. Default is SYS_DEBUG
 log_level=SYS_NOTICE
 
@@ -88,13 +88,12 @@
 # sandesh_send_rate_limit=
 
 # Enable/Disable SSL based XMPP Authentication
-{%- if pillar.get('salt', {}).get('minion', {}).get('cert', {}).opencontrail_xmpp is defined %}
-xmpp_auth_enable=true
-xmpp_server_cert={{ pillar.salt.minion.cert.opencontrail_xmpp.get('cert_file', '/etc/contrail/ssl/certs/server.pem') }}
-xmpp_server_key={{ pillar.salt.minion.cert.opencontrail_xmpp.get('key_file', '/etc/contrail/ssl/private/server-privkey.pem') }}
-xmpp_ca_cert={{ pillar.salt.minion.cert.opencontrail_xmpp.get('ca_file', '/etc/contrail/ssl/certs/ca-cert.pem') }}
+{%- if compute.xmpp.tls.enabled %}
+xmpp_auth_enable = {{ compute.xmpp.tls.auth.enabled }}
+xmpp_server_cert = {{ compute.xmpp.tls.cert_file }}
+xmpp_server_key = {{ compute.xmpp.tls.key_file }}
+xmpp_ca_cert = {{ compute.xmpp.tls.ca_cert_file }}
 {%- endif %}
-
 # Gateway mode : can be server/ vcpe (default is none)
 # gateway_mode=
 {%- if compute.gateway_mode is defined %}
@@ -231,8 +230,10 @@
 # name of virtual host interface
 name=vhost0
 
+{%- if compute.version < 4.1 %}
 # IP address and prefix in ip/prefix_len format
 ip={{ compute.interface.address }}/{{ compute.interface.mask }}
+{%- endif %}
 
 # Gateway IP address for virtual host
 gateway={{ compute.interface.gateway }}
@@ -252,7 +253,7 @@
 # (like metadata...)
 #compute_node_address = 10.204.216.28
 
-# We can have multiple gateway sections with different indices in the 
+# We can have multiple gateway sections with different indices in the
 # following format
 [GATEWAY-0]
 # Name of the routing_instance for which the gateway is being configured
@@ -389,4 +390,3 @@
 # Fallback time in seconds to find EOC in case config inactivity is not seen.
 # config_fallback_time=
 # config_inactivity_time=
-
diff --git a/opencontrail/files/4.1 b/opencontrail/files/4.1
new file mode 120000
index 0000000..0c16b90
--- /dev/null
+++ b/opencontrail/files/4.1
@@ -0,0 +1 @@
+4.0/
\ No newline at end of file
diff --git a/opencontrail/files/3.0/database/cassandra-env.sh b/opencontrail/files/cassandra/2.1/cassandra-env.sh
similarity index 100%
rename from opencontrail/files/3.0/database/cassandra-env.sh
rename to opencontrail/files/cassandra/2.1/cassandra-env.sh
diff --git a/opencontrail/files/3.0/cassandra.yaml b/opencontrail/files/cassandra/2.1/cassandra.yaml
similarity index 100%
rename from opencontrail/files/3.0/cassandra.yaml
rename to opencontrail/files/cassandra/2.1/cassandra.yaml
diff --git a/opencontrail/files/4.0/database/cassandra-env-analytics.sh b/opencontrail/files/cassandra/2.2/cassandra-env-analytics.sh
similarity index 100%
rename from opencontrail/files/4.0/database/cassandra-env-analytics.sh
rename to opencontrail/files/cassandra/2.2/cassandra-env-analytics.sh
diff --git a/opencontrail/files/4.0/database/cassandra-env.sh b/opencontrail/files/cassandra/2.2/cassandra-env.sh
similarity index 100%
rename from opencontrail/files/4.0/database/cassandra-env.sh
rename to opencontrail/files/cassandra/2.2/cassandra-env.sh
diff --git a/opencontrail/files/4.0/cassandra.yaml b/opencontrail/files/cassandra/2.2/cassandra.yaml
similarity index 100%
rename from opencontrail/files/4.0/cassandra.yaml
rename to opencontrail/files/cassandra/2.2/cassandra.yaml
diff --git a/opencontrail/files/4.0/cassandra_analytics.yaml b/opencontrail/files/cassandra/2.2/cassandra_analytics.yaml
similarity index 100%
rename from opencontrail/files/4.0/cassandra_analytics.yaml
rename to opencontrail/files/cassandra/2.2/cassandra_analytics.yaml
diff --git a/opencontrail/files/cassandra/3.10/cassandra-env-analytics.sh b/opencontrail/files/cassandra/3.10/cassandra-env-analytics.sh
new file mode 100644
index 0000000..00acb2d
--- /dev/null
+++ b/opencontrail/files/cassandra/3.10/cassandra-env-analytics.sh
@@ -0,0 +1,319 @@
+{%- from "opencontrail/map.jinja" import database with context %}# Licensed to the Apache Software Foundation (ASF) under one
+# or more contributor license agreements.  See the NOTICE file
+# distributed with this work for additional information
+# regarding copyright ownership.  The ASF licenses this file
+# to you under the Apache License, Version 2.0 (the
+# "License"); you may not use this file except in compliance
+# with the License.  You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+calculate_heap_sizes()
+{
+    case "`uname`" in
+        Linux)
+            system_memory_in_mb=`free -m | awk '/:/ {print $2;exit}'`
+            system_cpu_cores=`egrep -c 'processor([[:space:]]+):.*' /proc/cpuinfo`
+        ;;
+        FreeBSD)
+            system_memory_in_bytes=`sysctl hw.physmem | awk '{print $2}'`
+            system_memory_in_mb=`expr $system_memory_in_bytes / 1024 / 1024`
+            system_cpu_cores=`sysctl hw.ncpu | awk '{print $2}'`
+        ;;
+        SunOS)
+            system_memory_in_mb=`prtconf | awk '/Memory size:/ {print $3}'`
+            system_cpu_cores=`psrinfo | wc -l`
+        ;;
+        Darwin)
+            system_memory_in_bytes=`sysctl hw.memsize | awk '{print $2}'`
+            system_memory_in_mb=`expr $system_memory_in_bytes / 1024 / 1024`
+            system_cpu_cores=`sysctl hw.ncpu | awk '{print $2}'`
+        ;;
+        *)
+            # assume reasonable defaults for e.g. a modern desktop or
+            # cheap server
+            system_memory_in_mb="2048"
+            system_cpu_cores="2"
+        ;;
+    esac
+
+    # some systems like the raspberry pi don't report cores, use at least 1
+    if [ "$system_cpu_cores" -lt "1" ]
+    then
+        system_cpu_cores="1"
+    fi
+
+    # set max heap size based on the following
+    # max(min(1/2 ram, 1024MB), min(1/4 ram, 8GB))
+    # calculate 1/2 ram and cap to 1024MB
+    # calculate 1/4 ram and cap to 8192MB
+    # pick the max
+    half_system_memory_in_mb=`expr $system_memory_in_mb / 2`
+    quarter_system_memory_in_mb=`expr $half_system_memory_in_mb / 2`
+    if [ "$half_system_memory_in_mb" -gt "1024" ]
+    then
+        half_system_memory_in_mb="1024"
+    fi
+    if [ "$quarter_system_memory_in_mb" -gt "8192" ]
+    then
+        quarter_system_memory_in_mb="8192"
+    fi
+    if [ "$half_system_memory_in_mb" -gt "$quarter_system_memory_in_mb" ]
+    then
+        max_heap_size_in_mb="$half_system_memory_in_mb"
+    else
+        max_heap_size_in_mb="$quarter_system_memory_in_mb"
+    fi
+    MAX_HEAP_SIZE="${max_heap_size_in_mb}M"
+
+    # Young gen: min(max_sensible_per_modern_cpu_core * num_cores, 1/4 * heap size)
+    max_sensible_yg_per_core_in_mb="100"
+    max_sensible_yg_in_mb=`expr $max_sensible_yg_per_core_in_mb "*" $system_cpu_cores`
+
+    desired_yg_in_mb=`expr $max_heap_size_in_mb / 4`
+
+    if [ "$desired_yg_in_mb" -gt "$max_sensible_yg_in_mb" ]
+    then
+        HEAP_NEWSIZE="${max_sensible_yg_in_mb}M"
+    else
+        HEAP_NEWSIZE="${desired_yg_in_mb}M"
+    fi
+}
+
+# Determine the sort of JVM we'll be running on.
+java_ver_output=`"${JAVA:-java}" -version 2>&1`
+jvmver=`echo "$java_ver_output" | grep '[openjdk|java] version' | awk -F'"' 'NR==1 {print $2}' | cut -d\- -f1`
+JVM_VERSION=${jvmver%_*}
+JVM_PATCH_VERSION=${jvmver#*_}
+
+if [ "$JVM_VERSION" \< "1.8" ] ; then
+    echo "Cassandra 3.0 and later require Java 8u40 or later."
+    exit 1;
+fi
+
+if [ "$JVM_VERSION" \< "1.8" ] && [ "$JVM_PATCH_VERSION" -lt 40 ] ; then
+    echo "Cassandra 3.0 and later require Java 8u40 or later."
+    exit 1;
+fi
+
+jvm=`echo "$java_ver_output" | grep -A 1 'java version' | awk 'NR==2 {print $1}'`
+case "$jvm" in
+    OpenJDK)
+        JVM_VENDOR=OpenJDK
+        # this will be "64-Bit" or "32-Bit"
+        JVM_ARCH=`echo "$java_ver_output" | awk 'NR==3 {print $2}'`
+        ;;
+    "Java(TM)")
+        JVM_VENDOR=Oracle
+        # this will be "64-Bit" or "32-Bit"
+        JVM_ARCH=`echo "$java_ver_output" | awk 'NR==3 {print $3}'`
+        ;;
+    *)
+        # Help fill in other JVM values
+        JVM_VENDOR=other
+        JVM_ARCH=unknown
+        ;;
+esac
+
+{% set cassandra_gc_logging = database.get('cassandra_gc_logging', 'rotation') %}
+{% if cassandra_gc_logging %}
+JVM_OPTS="$JVM_OPTS -XX:+PrintGCDetails"
+JVM_OPTS="$JVM_OPTS -XX:+PrintGCDateStamps"
+JVM_OPTS="$JVM_OPTS -XX:+PrintHeapAtGC"
+JVM_OPTS="$JVM_OPTS -XX:+PrintTenuringDistribution"
+JVM_OPTS="$JVM_OPTS -XX:+PrintGCApplicationStoppedTime"
+JVM_OPTS="$JVM_OPTS -XX:+PrintPromotionFailure"
+JVM_OPTS="$JVM_OPTS -XX:PrintFLSStatistics=1"
+{% if cassandra_gc_logging == 'legacy' %}
+JVM_OPTS="$JVM_OPTS -Xloggc:/var/log/cassandra/gc-`date +%s`.log"
+{% elif cassandra_gc_logging == 'rotation' %}
+#GC log path has to be defined here because it needs to access CASSANDRA_HOME
+JVM_OPTS="$JVM_OPTS -Xloggc:/var/log/cassandra/gc.log"
+JVM_OPTS="$JVM_OPTS -XX:+UseGCLogFileRotation"
+JVM_OPTS="$JVM_OPTS -XX:NumberOfGCLogFiles=10"
+JVM_OPTS="$JVM_OPTS -XX:GCLogFileSize=10M"
+{% endif %}
+{% endif %}
+
+# Here we create the arguments that will get passed to the jvm when
+# starting cassandra.
+
+# Read user-defined JVM options from jvm.options file
+JVM_OPTS_FILE=$CASSANDRA_CONF/jvm.options
+for opt in `grep "^-" $JVM_OPTS_FILE`
+do
+  JVM_OPTS="$JVM_OPTS $opt"
+done
+
+# Check what parameters were defined on jvm.options file to avoid conflicts
+echo $JVM_OPTS | grep -q Xmn
+DEFINED_XMN=$?
+echo $JVM_OPTS | grep -q Xmx
+DEFINED_XMX=$?
+echo $JVM_OPTS | grep -q Xms
+DEFINED_XMS=$?
+echo $JVM_OPTS | grep -q UseConcMarkSweepGC
+USING_CMS=$?
+echo $JVM_OPTS | grep -q UseG1GC
+USING_G1=$?
+
+# Override these to set the amount of memory to allocate to the JVM at
+# start-up. For production use you may wish to adjust this for your
+# environment. MAX_HEAP_SIZE is the total amount of memory dedicated
+# to the Java heap. HEAP_NEWSIZE refers to the size of the young
+# generation. Both MAX_HEAP_SIZE and HEAP_NEWSIZE should be either set
+# or not (if you set one, set the other).
+#
+# The main trade-off for the young generation is that the larger it
+# is, the longer GC pause times will be. The shorter it is, the more
+# expensive GC will be (usually).
+#
+# The example HEAP_NEWSIZE assumes a modern 8-core+ machine for decent pause
+# times. If in doubt, and if you do not particularly want to tweak, go with
+# 100 MB per physical CPU core.
+
+#MAX_HEAP_SIZE="4G"
+#HEAP_NEWSIZE="800M"
+
+{%- if database.max_heap_size is defined %}
+MAX_HEAP_SIZE="{{ database.max_heap_size }}"
+{%- endif %}
+{%- if database.heap_newsize is defined %}
+HEAP_NEWSIZE="{{ database.heap_newsize }}"
+{%- endif %}
+
+# Set this to control the amount of arenas per-thread in glibc
+#export MALLOC_ARENA_MAX=4
+
+# only calculate the size if it's not set manually
+if [ "x$MAX_HEAP_SIZE" = "x" ] && [ "x$HEAP_NEWSIZE" = "x" -o $USING_G1 -eq 0 ]; then
+    calculate_heap_sizes
+elif [ "x$MAX_HEAP_SIZE" = "x" ] ||  [ "x$HEAP_NEWSIZE" = "x" -a $USING_G1 -ne 0 ]; then
+    echo "please set or unset MAX_HEAP_SIZE and HEAP_NEWSIZE in pairs when using CMS GC (see cassandra-env.sh)"
+    exit 1
+fi
+
+if [ "x$MALLOC_ARENA_MAX" = "x" ] ; then
+    export MALLOC_ARENA_MAX=4
+fi
+
+# We only set -Xms and -Xmx if they were not defined on jvm.options file
+# If defined, both Xmx and Xms should be defined together.
+if [ $DEFINED_XMX -ne 0 ] && [ $DEFINED_XMS -ne 0 ]; then
+     JVM_OPTS="$JVM_OPTS -Xms${MAX_HEAP_SIZE}"
+     JVM_OPTS="$JVM_OPTS -Xmx${MAX_HEAP_SIZE}"
+elif [ $DEFINED_XMX -ne 0 ] || [ $DEFINED_XMS -ne 0 ]; then
+     echo "Please set or unset -Xmx and -Xms flags in pairs on jvm.options file."
+     exit 1
+fi
+
+# We only set -Xmn flag if it was not defined in jvm.options file
+# and if the CMS GC is being used
+# If defined, both Xmn and Xmx should be defined together.
+if [ $DEFINED_XMN -eq 0 ] && [ $DEFINED_XMX -ne 0 ]; then
+    echo "Please set or unset -Xmx and -Xmn flags in pairs on jvm.options file."
+    exit 1
+elif [ $DEFINED_XMN -ne 0 ] && [ $USING_CMS -eq 0 ]; then
+    JVM_OPTS="$JVM_OPTS -Xmn${HEAP_NEWSIZE}"
+fi
+
+if [ "$JVM_ARCH" = "64-Bit" ] && [ $USING_CMS -eq 0 ]; then
+    JVM_OPTS="$JVM_OPTS -XX:+UseCondCardMark"
+fi
+
+# provides hints to the JIT compiler
+JVM_OPTS="$JVM_OPTS -XX:CompileCommandFile=$CASSANDRA_CONF/hotspot_compiler"
+
+# add the jamm javaagent
+JVM_OPTS="$JVM_OPTS -javaagent:$CASSANDRA_HOME/lib/jamm-0.3.0.jar"
+
+# set jvm HeapDumpPath with CASSANDRA_HEAPDUMP_DIR
+if [ "x$CASSANDRA_HEAPDUMP_DIR" != "x" ]; then
+    JVM_OPTS="$JVM_OPTS -XX:HeapDumpPath=$CASSANDRA_HEAPDUMP_DIR/cassandra-`date +%s`-pid$$.hprof"
+fi
+
+# jmx: metrics and administration interface
+#
+# add this if you're having trouble connecting:
+# JVM_OPTS="$JVM_OPTS -Djava.rmi.server.hostname=<public name>"
+#
+# see
+# https://blogs.oracle.com/jmxetc/entry/troubleshooting_connection_problems_in_jconsole
+# for more on configuring JMX through firewalls, etc. (Short version:
+# get it working with no firewall first.)
+#
+# Cassandra ships with JMX accessible *only* from localhost.  
+# To enable remote JMX connections, uncomment lines below
+# with authentication and/or ssl enabled. See https://wiki.apache.org/cassandra/JmxSecurity 
+#
+if [ "x$LOCAL_JMX" = "x" ]; then
+    LOCAL_JMX=yes
+fi
+
+# Specifies the default port over which Cassandra will be available for
+# JMX connections.
+# For security reasons, you should not expose this port to the internet.  Firewall it if needed.
+JMX_PORT="7199"
+
+if [ "$LOCAL_JMX" = "yes" ]; then
+  JVM_OPTS="$JVM_OPTS -Dcassandra.jmx.local.port=$JMX_PORT"
+  JVM_OPTS="$JVM_OPTS -Dcom.sun.management.jmxremote.authenticate=false"
+else
+  JVM_OPTS="$JVM_OPTS -Dcassandra.jmx.remote.port=$JMX_PORT"
+  # if ssl is enabled the same port cannot be used for both jmx and rmi so either
+  # pick another value for this property or comment out to use a random port (though see CASSANDRA-7087 for origins)
+  JVM_OPTS="$JVM_OPTS -Dcom.sun.management.jmxremote.rmi.port=$JMX_PORT"
+
+  # turn on JMX authentication. See below for further options
+  JVM_OPTS="$JVM_OPTS -Dcom.sun.management.jmxremote.authenticate=true"
+
+  # jmx ssl options
+  #JVM_OPTS="$JVM_OPTS -Dcom.sun.management.jmxremote.ssl=true"
+  #JVM_OPTS="$JVM_OPTS -Dcom.sun.management.jmxremote.ssl.need.client.auth=true"
+  #JVM_OPTS="$JVM_OPTS -Dcom.sun.management.jmxremote.ssl.enabled.protocols=<enabled-protocols>"
+  #JVM_OPTS="$JVM_OPTS -Dcom.sun.management.jmxremote.ssl.enabled.cipher.suites=<enabled-cipher-suites>"
+  #JVM_OPTS="$JVM_OPTS -Djavax.net.ssl.keyStore=/path/to/keystore"
+  #JVM_OPTS="$JVM_OPTS -Djavax.net.ssl.keyStorePassword=<keystore-password>"
+  #JVM_OPTS="$JVM_OPTS -Djavax.net.ssl.trustStore=/path/to/truststore"
+  #JVM_OPTS="$JVM_OPTS -Djavax.net.ssl.trustStorePassword=<truststore-password>"
+fi
+
+# jmx authentication and authorization options. By default, auth is only
+# activated for remote connections but they can also be enabled for local only JMX
+## Basic file based authn & authz
+JVM_OPTS="$JVM_OPTS -Dcom.sun.management.jmxremote.password.file=/etc/cassandra/jmxremote.password"
+#JVM_OPTS="$JVM_OPTS -Dcom.sun.management.jmxremote.access.file=/etc/cassandra/jmxremote.access"
+## Custom auth settings which can be used as alternatives to JMX's out of the box auth utilities.
+## JAAS login modules can be used for authentication by uncommenting these two properties.
+## Cassandra ships with a LoginModule implementation - org.apache.cassandra.auth.CassandraLoginModule -
+## which delegates to the IAuthenticator configured in cassandra.yaml. See the sample JAAS configuration
+## file cassandra-jaas.config
+#JVM_OPTS="$JVM_OPTS -Dcassandra.jmx.remote.login.config=CassandraLogin"
+#JVM_OPTS="$JVM_OPTS -Djava.security.auth.login.config=$CASSANDRA_HOME/conf/cassandra-jaas.config"
+
+## Cassandra also ships with a helper for delegating JMX authz calls to the configured IAuthorizer,
+## uncomment this to use it. Requires one of the two authentication options to be enabled
+#JVM_OPTS="$JVM_OPTS -Dcassandra.jmx.authorizer=org.apache.cassandra.auth.jmx.AuthorizationProxy"
+
+# To use mx4j, an HTML interface for JMX, add mx4j-tools.jar to the lib/
+# directory.
+# See http://wiki.apache.org/cassandra/Operations#Monitoring_with_MX4J
+# By default mx4j listens on 0.0.0.0:8081. Uncomment the following lines
+# to control its listen address and port.
+#MX4J_ADDRESS="-Dmx4jaddress=127.0.0.1"
+#MX4J_PORT="-Dmx4jport=8081"
+
+# Cassandra uses SIGAR to capture OS metrics CASSANDRA-7838
+# for SIGAR we have to set the java.library.path
+# to the location of the native libraries.
+JVM_OPTS="$JVM_OPTS -Djava.library.path=$CASSANDRA_HOME/lib/sigar-bin"
+
+JVM_OPTS="$JVM_OPTS $MX4J_ADDRESS"
+JVM_OPTS="$JVM_OPTS $MX4J_PORT"
+JVM_OPTS="$JVM_OPTS $JVM_EXTRA_OPTS"
diff --git a/opencontrail/files/cassandra/3.10/cassandra-env.sh b/opencontrail/files/cassandra/3.10/cassandra-env.sh
new file mode 100644
index 0000000..ba547f2
--- /dev/null
+++ b/opencontrail/files/cassandra/3.10/cassandra-env.sh
@@ -0,0 +1,324 @@
+{%- from "opencontrail/map.jinja" import database with context %}# Licensed to the Apache Software Foundation (ASF) under one
+# or more contributor license agreements.  See the NOTICE file
+# distributed with this work for additional information
+# regarding copyright ownership.  The ASF licenses this file
+# to you under the Apache License, Version 2.0 (the
+# "License"); you may not use this file except in compliance
+# with the License.  You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+calculate_heap_sizes()
+{
+    case "`uname`" in
+        Linux)
+            system_memory_in_mb=`free -m | awk '/:/ {print $2;exit}'`
+            system_cpu_cores=`egrep -c 'processor([[:space:]]+):.*' /proc/cpuinfo`
+        ;;
+        FreeBSD)
+            system_memory_in_bytes=`sysctl hw.physmem | awk '{print $2}'`
+            system_memory_in_mb=`expr $system_memory_in_bytes / 1024 / 1024`
+            system_cpu_cores=`sysctl hw.ncpu | awk '{print $2}'`
+        ;;
+        SunOS)
+            system_memory_in_mb=`prtconf | awk '/Memory size:/ {print $3}'`
+            system_cpu_cores=`psrinfo | wc -l`
+        ;;
+        Darwin)
+            system_memory_in_bytes=`sysctl hw.memsize | awk '{print $2}'`
+            system_memory_in_mb=`expr $system_memory_in_bytes / 1024 / 1024`
+            system_cpu_cores=`sysctl hw.ncpu | awk '{print $2}'`
+        ;;
+        *)
+            # assume reasonable defaults for e.g. a modern desktop or
+            # cheap server
+            system_memory_in_mb="2048"
+            system_cpu_cores="2"
+        ;;
+    esac
+
+    # some systems like the raspberry pi don't report cores, use at least 1
+    if [ "$system_cpu_cores" -lt "1" ]
+    then
+        system_cpu_cores="1"
+    fi
+
+    # set max heap size based on the following
+    # max(min(1/2 ram, 1024MB), min(1/4 ram, 8GB))
+    # calculate 1/2 ram and cap to 1024MB
+    # calculate 1/4 ram and cap to 8192MB
+    # pick the max
+    half_system_memory_in_mb=`expr $system_memory_in_mb / 2`
+    quarter_system_memory_in_mb=`expr $half_system_memory_in_mb / 2`
+    if [ "$half_system_memory_in_mb" -gt "1024" ]
+    then
+        half_system_memory_in_mb="1024"
+    fi
+    if [ "$quarter_system_memory_in_mb" -gt "8192" ]
+    then
+        quarter_system_memory_in_mb="8192"
+    fi
+    if [ "$half_system_memory_in_mb" -gt "$quarter_system_memory_in_mb" ]
+    then
+        max_heap_size_in_mb="$half_system_memory_in_mb"
+    else
+        max_heap_size_in_mb="$quarter_system_memory_in_mb"
+    fi
+    MAX_HEAP_SIZE="${max_heap_size_in_mb}M"
+
+    # Young gen: min(max_sensible_per_modern_cpu_core * num_cores, 1/4 * heap size)
+    max_sensible_yg_per_core_in_mb="100"
+    max_sensible_yg_in_mb=`expr $max_sensible_yg_per_core_in_mb "*" $system_cpu_cores`
+
+    desired_yg_in_mb=`expr $max_heap_size_in_mb / 4`
+
+    if [ "$desired_yg_in_mb" -gt "$max_sensible_yg_in_mb" ]
+    then
+        HEAP_NEWSIZE="${max_sensible_yg_in_mb}M"
+    else
+        HEAP_NEWSIZE="${desired_yg_in_mb}M"
+    fi
+}
+
+# Determine the sort of JVM we'll be running on.
+java_ver_output=`"${JAVA:-java}" -version 2>&1`
+jvmver=`echo "$java_ver_output" | grep '[openjdk|java] version' | awk -F'"' 'NR==1 {print $2}' | cut -d\- -f1`
+JVM_VERSION=${jvmver%_*}
+JVM_PATCH_VERSION=${jvmver#*_}
+
+if [ "$JVM_VERSION" \< "1.8" ] ; then
+    echo "Cassandra 3.0 and later require Java 8u40 or later."
+    exit 1;
+fi
+
+if [ "$JVM_VERSION" \< "1.8" ] && [ "$JVM_PATCH_VERSION" -lt 40 ] ; then
+    echo "Cassandra 3.0 and later require Java 8u40 or later."
+    exit 1;
+fi
+
+jvm=`echo "$java_ver_output" | grep -A 1 'java version' | awk 'NR==2 {print $1}'`
+case "$jvm" in
+    OpenJDK)
+        JVM_VENDOR=OpenJDK
+        # this will be "64-Bit" or "32-Bit"
+        JVM_ARCH=`echo "$java_ver_output" | awk 'NR==3 {print $2}'`
+        ;;
+    "Java(TM)")
+        JVM_VENDOR=Oracle
+        # this will be "64-Bit" or "32-Bit"
+        JVM_ARCH=`echo "$java_ver_output" | awk 'NR==3 {print $3}'`
+        ;;
+    *)
+        # Help fill in other JVM values
+        JVM_VENDOR=other
+        JVM_ARCH=unknown
+        ;;
+esac
+
+{% set cassandra_gc_logging = database.get('cassandra_gc_logging', 'rotation') %}
+{% if cassandra_gc_logging %}
+JVM_OPTS="$JVM_OPTS -XX:+PrintGCDetails"
+JVM_OPTS="$JVM_OPTS -XX:+PrintGCDateStamps"
+JVM_OPTS="$JVM_OPTS -XX:+PrintHeapAtGC"
+JVM_OPTS="$JVM_OPTS -XX:+PrintTenuringDistribution"
+JVM_OPTS="$JVM_OPTS -XX:+PrintGCApplicationStoppedTime"
+JVM_OPTS="$JVM_OPTS -XX:+PrintPromotionFailure"
+JVM_OPTS="$JVM_OPTS -XX:PrintFLSStatistics=1"
+{% if cassandra_gc_logging == 'legacy' %}
+JVM_OPTS="$JVM_OPTS -Xloggc:/var/log/cassandra/gc-`date +%s`.log"
+{% elif cassandra_gc_logging == 'rotation' %}
+#GC log path has to be defined here because it needs to access CASSANDRA_HOME
+JVM_OPTS="$JVM_OPTS -Xloggc:/var/log/cassandra/gc.log"
+JVM_OPTS="$JVM_OPTS -XX:+UseGCLogFileRotation"
+JVM_OPTS="$JVM_OPTS -XX:NumberOfGCLogFiles=10"
+JVM_OPTS="$JVM_OPTS -XX:GCLogFileSize=10M"
+{% endif %}
+{% endif %}
+
+# Here we create the arguments that will get passed to the jvm when
+# starting cassandra.
+
+# Read user-defined JVM options from jvm.options file
+JVM_OPTS_FILE=$CASSANDRA_CONF/jvm.options
+for opt in `grep "^-" $JVM_OPTS_FILE`
+do
+  JVM_OPTS="$JVM_OPTS $opt"
+done
+
+# Check what parameters were defined on jvm.options file to avoid conflicts
+echo $JVM_OPTS | grep -q Xmn
+DEFINED_XMN=$?
+echo $JVM_OPTS | grep -q Xmx
+DEFINED_XMX=$?
+echo $JVM_OPTS | grep -q Xms
+DEFINED_XMS=$?
+echo $JVM_OPTS | grep -q UseConcMarkSweepGC
+USING_CMS=$?
+echo $JVM_OPTS | grep -q UseG1GC
+USING_G1=$?
+
+# Override these to set the amount of memory to allocate to the JVM at
+# start-up. For production use you may wish to adjust this for your
+# environment. MAX_HEAP_SIZE is the total amount of memory dedicated
+# to the Java heap. HEAP_NEWSIZE refers to the size of the young
+# generation. Both MAX_HEAP_SIZE and HEAP_NEWSIZE should be either set
+# or not (if you set one, set the other).
+#
+# The main trade-off for the young generation is that the larger it
+# is, the longer GC pause times will be. The shorter it is, the more
+# expensive GC will be (usually).
+#
+# The example HEAP_NEWSIZE assumes a modern 8-core+ machine for decent pause
+# times. If in doubt, and if you do not particularly want to tweak, go with
+# 100 MB per physical CPU core.
+
+#MAX_HEAP_SIZE="4G"
+#HEAP_NEWSIZE="800M"
+
+{%- if database.max_heap_size is defined %}
+MAX_HEAP_SIZE="{{ database.max_heap_size }}"
+{%- endif %}
+{%- if database.heap_newsize is defined %}
+HEAP_NEWSIZE="{{ database.heap_newsize }}"
+{%- endif %}
+
+# Set this to control the amount of arenas per-thread in glibc
+#export MALLOC_ARENA_MAX=4
+
+# only calculate the size if it's not set manually
+if [ "x$MAX_HEAP_SIZE" = "x" ] && [ "x$HEAP_NEWSIZE" = "x" -o $USING_G1 -eq 0 ]; then
+    calculate_heap_sizes
+elif [ "x$MAX_HEAP_SIZE" = "x" ] ||  [ "x$HEAP_NEWSIZE" = "x" -a $USING_G1 -ne 0 ]; then
+    echo "please set or unset MAX_HEAP_SIZE and HEAP_NEWSIZE in pairs when using CMS GC (see cassandra-env.sh)"
+    exit 1
+fi
+
+if [ "x$MALLOC_ARENA_MAX" = "x" ] ; then
+    export MALLOC_ARENA_MAX=4
+fi
+
+# We only set -Xms and -Xmx if they were not defined on jvm.options file
+# If defined, both Xmx and Xms should be defined together.
+if [ $DEFINED_XMX -ne 0 ] && [ $DEFINED_XMS -ne 0 ]; then
+     JVM_OPTS="$JVM_OPTS -Xms${MAX_HEAP_SIZE}"
+     JVM_OPTS="$JVM_OPTS -Xmx${MAX_HEAP_SIZE}"
+elif [ $DEFINED_XMX -ne 0 ] || [ $DEFINED_XMS -ne 0 ]; then
+     echo "Please set or unset -Xmx and -Xms flags in pairs on jvm.options file."
+     exit 1
+fi
+
+# We only set -Xmn flag if it was not defined in jvm.options file
+# and if the CMS GC is being used
+# If defined, both Xmn and Xmx should be defined together.
+if [ $DEFINED_XMN -eq 0 ] && [ $DEFINED_XMX -ne 0 ]; then
+    echo "Please set or unset -Xmx and -Xmn flags in pairs on jvm.options file."
+    exit 1
+elif [ $DEFINED_XMN -ne 0 ] && [ $USING_CMS -eq 0 ]; then
+    JVM_OPTS="$JVM_OPTS -Xmn${HEAP_NEWSIZE}"
+fi
+
+if [ "$JVM_ARCH" = "64-Bit" ] && [ $USING_CMS -eq 0 ]; then
+    JVM_OPTS="$JVM_OPTS -XX:+UseCondCardMark"
+fi
+
+# provides hints to the JIT compiler
+JVM_OPTS="$JVM_OPTS -XX:CompileCommandFile=$CASSANDRA_CONF/hotspot_compiler"
+
+# add the jamm javaagent
+JVM_OPTS="$JVM_OPTS -javaagent:$CASSANDRA_HOME/lib/jamm-0.3.0.jar"
+
+# set jvm HeapDumpPath with CASSANDRA_HEAPDUMP_DIR
+if [ "x$CASSANDRA_HEAPDUMP_DIR" != "x" ]; then
+    JVM_OPTS="$JVM_OPTS -XX:HeapDumpPath=$CASSANDRA_HEAPDUMP_DIR/cassandra-`date +%s`-pid$$.hprof"
+fi
+
+# jmx: metrics and administration interface
+#
+# add this if you're having trouble connecting:
+# JVM_OPTS="$JVM_OPTS -Djava.rmi.server.hostname=<public name>"
+#
+# see
+# https://blogs.oracle.com/jmxetc/entry/troubleshooting_connection_problems_in_jconsole
+# for more on configuring JMX through firewalls, etc. (Short version:
+# get it working with no firewall first.)
+#
+# Cassandra ships with JMX accessible *only* from localhost.  
+# To enable remote JMX connections, uncomment lines below
+# with authentication and/or ssl enabled. See https://wiki.apache.org/cassandra/JmxSecurity 
+#
+if [ "x$LOCAL_JMX" = "x" ]; then
+    LOCAL_JMX=yes
+fi
+
+# Specifies the default port over which Cassandra will be available for
+# JMX connections.
+# For security reasons, you should not expose this port to the internet.  Firewall it if needed.
+JMX_PORT="7198"
+
+if [ "$LOCAL_JMX" = "yes" ]; then
+  JVM_OPTS="$JVM_OPTS -Dcassandra.jmx.local.port=$JMX_PORT"
+  JVM_OPTS="$JVM_OPTS -Dcom.sun.management.jmxremote.authenticate=false"
+else
+  JVM_OPTS="$JVM_OPTS -Dcassandra.jmx.remote.port=$JMX_PORT"
+  # if ssl is enabled the same port cannot be used for both jmx and rmi so either
+  # pick another value for this property or comment out to use a random port (though see CASSANDRA-7087 for origins)
+  JVM_OPTS="$JVM_OPTS -Dcom.sun.management.jmxremote.rmi.port=$JMX_PORT"
+
+  # turn on JMX authentication. See below for further options
+  JVM_OPTS="$JVM_OPTS -Dcom.sun.management.jmxremote.authenticate=true"
+
+  # jmx ssl options
+  #JVM_OPTS="$JVM_OPTS -Dcom.sun.management.jmxremote.ssl=true"
+  #JVM_OPTS="$JVM_OPTS -Dcom.sun.management.jmxremote.ssl.need.client.auth=true"
+  #JVM_OPTS="$JVM_OPTS -Dcom.sun.management.jmxremote.ssl.enabled.protocols=<enabled-protocols>"
+  #JVM_OPTS="$JVM_OPTS -Dcom.sun.management.jmxremote.ssl.enabled.cipher.suites=<enabled-cipher-suites>"
+  #JVM_OPTS="$JVM_OPTS -Djavax.net.ssl.keyStore=/path/to/keystore"
+  #JVM_OPTS="$JVM_OPTS -Djavax.net.ssl.keyStorePassword=<keystore-password>"
+  #JVM_OPTS="$JVM_OPTS -Djavax.net.ssl.trustStore=/path/to/truststore"
+  #JVM_OPTS="$JVM_OPTS -Djavax.net.ssl.trustStorePassword=<truststore-password>"
+fi
+
+# jmx authentication and authorization options. By default, auth is only
+# activated for remote connections but they can also be enabled for local only JMX
+## Basic file based authn & authz
+JVM_OPTS="$JVM_OPTS -Dcom.sun.management.jmxremote.password.file=/etc/cassandra/jmxremote.password"
+#JVM_OPTS="$JVM_OPTS -Dcom.sun.management.jmxremote.access.file=/etc/cassandra/jmxremote.access"
+## Custom auth settings which can be used as alternatives to JMX's out of the box auth utilities.
+## JAAS login modules can be used for authentication by uncommenting these two properties.
+## Cassandra ships with a LoginModule implementation - org.apache.cassandra.auth.CassandraLoginModule -
+## which delegates to the IAuthenticator configured in cassandra.yaml. See the sample JAAS configuration
+## file cassandra-jaas.config
+#JVM_OPTS="$JVM_OPTS -Dcassandra.jmx.remote.login.config=CassandraLogin"
+#JVM_OPTS="$JVM_OPTS -Djava.security.auth.login.config=$CASSANDRA_HOME/conf/cassandra-jaas.config"
+
+## Cassandra also ships with a helper for delegating JMX authz calls to the configured IAuthorizer,
+## uncomment this to use it. Requires one of the two authentication options to be enabled
+#JVM_OPTS="$JVM_OPTS -Dcassandra.jmx.authorizer=org.apache.cassandra.auth.jmx.AuthorizationProxy"
+
+# To use mx4j, an HTML interface for JMX, add mx4j-tools.jar to the lib/
+# directory.
+# See http://wiki.apache.org/cassandra/Operations#Monitoring_with_MX4J
+# By default mx4j listens on 0.0.0.0:8081. Uncomment the following lines
+# to control its listen address and port.
+#MX4J_ADDRESS="-Dmx4jaddress=127.0.0.1"
+#MX4J_PORT="-Dmx4jport=8081"
+
+# Cassandra uses SIGAR to capture OS metrics CASSANDRA-7838
+# for SIGAR we have to set the java.library.path
+# to the location of the native libraries.
+JVM_OPTS="$JVM_OPTS -Djava.library.path=$CASSANDRA_HOME/lib/sigar-bin"
+
+JVM_OPTS="$JVM_OPTS $MX4J_ADDRESS"
+JVM_OPTS="$JVM_OPTS $MX4J_PORT"
+JVM_OPTS="$JVM_OPTS $JVM_EXTRA_OPTS"
+
+# Add cassandra pid file, even if not used. It will stay in params and
+# contrail-nodemgr can detect cassandra PID from process list.
+
+JVM_OPTS="$JVM_OPTS -Dcassandra-pidfile=/var/run/cassandra/cassandra.pid"
diff --git a/opencontrail/files/cassandra/3.10/cassandra.yaml b/opencontrail/files/cassandra/3.10/cassandra.yaml
new file mode 100644
index 0000000..ebabb4a
--- /dev/null
+++ b/opencontrail/files/cassandra/3.10/cassandra.yaml
@@ -0,0 +1,1208 @@
+{%- from "opencontrail/map.jinja" import database with context %}
+# Cassandra storage config YAML
+
+# NOTE:
+#   See http://wiki.apache.org/cassandra/StorageConfiguration for
+#   full explanations of configuration directives
+# /NOTE
+
+# The name of the cluster. This is mainly used to prevent machines in
+# one logical cluster from joining another.
+cluster_name: '{{ database.name }}'
+
+# This defines the number of tokens randomly assigned to this node on the ring
+# The more tokens, relative to other nodes, the larger the proportion of data
+# that this node will store. You probably want all nodes to have the same number
+# of tokens assuming they have equal hardware capability.
+#
+# If you leave this unspecified, Cassandra will use the default of 1 token for legacy compatibility,
+# and will use the initial_token as described below.
+#
+# Specifying initial_token will override this setting on the node's initial start,
+# on subsequent starts, this setting will apply even if initial token is set.
+#
+# If you already have a cluster with 1 token per node, and wish to migrate to 
+# multiple tokens per node, see http://wiki.apache.org/cassandra/Operations
+num_tokens: 256
+
+# Triggers automatic allocation of num_tokens tokens for this node. The allocation
+# algorithm attempts to choose tokens in a way that optimizes replicated load over
+# the nodes in the datacenter for the replication strategy used by the specified
+# keyspace.
+#
+# The load assigned to each node will be close to proportional to its number of
+# vnodes.
+#
+# Only supported with the Murmur3Partitioner.
+# allocate_tokens_for_keyspace: KEYSPACE
+
+# initial_token allows you to specify tokens manually.  While you can use it with
+# vnodes (num_tokens > 1, above) -- in which case you should provide a 
+# comma-separated list -- it's primarily used when adding nodes to legacy clusters 
+# that do not have vnodes enabled.
+# initial_token:
+
+# See http://wiki.apache.org/cassandra/HintedHandoff
+# May either be "true" or "false" to enable globally
+hinted_handoff_enabled: true
+
+# When hinted_handoff_enabled is true, a black list of data centers that will not
+# perform hinted handoff
+# hinted_handoff_disabled_datacenters:
+#    - DC1
+#    - DC2
+
+# this defines the maximum amount of time a dead host will have hints
+# generated.  After it has been dead this long, new hints for it will not be
+# created until it has been seen alive and gone down again.
+max_hint_window_in_ms: 10800000 # 3 hours
+
+# Maximum throttle in KBs per second, per delivery thread.  This will be
+# reduced proportionally to the number of nodes in the cluster.  (If there
+# are two nodes in the cluster, each delivery thread will use the maximum
+# rate; if there are three, each will throttle to half of the maximum,
+# since we expect two nodes to be delivering hints simultaneously.)
+hinted_handoff_throttle_in_kb: 1024
+
+# Number of threads with which to deliver hints;
+# Consider increasing this number when you have multi-dc deployments, since
+# cross-dc handoff tends to be slower
+max_hints_delivery_threads: 2
+
+# Directory where Cassandra should store hints.
+# If not set, the default directory is $CASSANDRA_HOME/data/hints.
+# hints_directory: /var/lib/cassandra/hints
+
+# How often hints should be flushed from the internal buffers to disk.
+# Will *not* trigger fsync.
+hints_flush_period_in_ms: 10000
+
+# Maximum size for a single hints file, in megabytes.
+max_hints_file_size_in_mb: 128
+
+# Compression to apply to the hint files. If omitted, hints files
+# will be written uncompressed. LZ4, Snappy, and Deflate compressors
+# are supported.
+#hints_compression:
+#   - class_name: LZ4Compressor
+#     parameters:
+#         -
+
+# Maximum throttle in KBs per second, total. This will be
+# reduced proportionally to the number of nodes in the cluster.
+batchlog_replay_throttle_in_kb: 1024
+
+# Authentication backend, implementing IAuthenticator; used to identify users
+# Out of the box, Cassandra provides org.apache.cassandra.auth.{AllowAllAuthenticator,
+# PasswordAuthenticator}.
+#
+# - AllowAllAuthenticator performs no checks - set it to disable authentication.
+# - PasswordAuthenticator relies on username/password pairs to authenticate
+#   users. It keeps usernames and hashed passwords in system_auth.roles table.
+#   Please increase system_auth keyspace replication factor if you use this authenticator.
+#   If using PasswordAuthenticator, CassandraRoleManager must also be used (see below)
+authenticator: AllowAllAuthenticator
+
+# Authorization backend, implementing IAuthorizer; used to limit access/provide permissions
+# Out of the box, Cassandra provides org.apache.cassandra.auth.{AllowAllAuthorizer,
+# CassandraAuthorizer}.
+#
+# - AllowAllAuthorizer allows any action to any user - set it to disable authorization.
+# - CassandraAuthorizer stores permissions in system_auth.role_permissions table. Please
+#   increase system_auth keyspace replication factor if you use this authorizer.
+authorizer: AllowAllAuthorizer
+
+# Part of the Authentication & Authorization backend, implementing IRoleManager; used
+# to maintain grants and memberships between roles.
+# Out of the box, Cassandra provides org.apache.cassandra.auth.CassandraRoleManager,
+# which stores role information in the system_auth keyspace. Most functions of the
+# IRoleManager require an authenticated login, so unless the configured IAuthenticator
+# actually implements authentication, most of this functionality will be unavailable.
+#
+# - CassandraRoleManager stores role data in the system_auth keyspace. Please
+#   increase system_auth keyspace replication factor if you use this role manager.
+role_manager: CassandraRoleManager
+
+# Validity period for roles cache (fetching granted roles can be an expensive
+# operation depending on the role manager, CassandraRoleManager is one example)
+# Granted roles are cached for authenticated sessions in AuthenticatedUser and
+# after the period specified here, become eligible for (async) reload.
+# Defaults to 2000, set to 0 to disable caching entirely.
+# Will be disabled automatically for AllowAllAuthenticator.
+roles_validity_in_ms: 2000
+
+# Refresh interval for roles cache (if enabled).
+# After this interval, cache entries become eligible for refresh. Upon next
+# access, an async reload is scheduled and the old value returned until it
+# completes. If roles_validity_in_ms is non-zero, then this must be
+# also.
+# Defaults to the same value as roles_validity_in_ms.
+# roles_update_interval_in_ms: 2000
+
+# Validity period for permissions cache (fetching permissions can be an
+# expensive operation depending on the authorizer, CassandraAuthorizer is
+# one example). Defaults to 2000, set to 0 to disable.
+# Will be disabled automatically for AllowAllAuthorizer.
+permissions_validity_in_ms: 2000
+
+# Refresh interval for permissions cache (if enabled).
+# After this interval, cache entries become eligible for refresh. Upon next
+# access, an async reload is scheduled and the old value returned until it
+# completes. If permissions_validity_in_ms is non-zero, then this must be
+# also.
+# Defaults to the same value as permissions_validity_in_ms.
+# permissions_update_interval_in_ms: 2000
+
+# Validity period for credentials cache. This cache is tightly coupled to
+# the provided PasswordAuthenticator implementation of IAuthenticator. If
+# another IAuthenticator implementation is configured, this cache will not
+# be automatically used and so the following settings will have no effect.
+# Please note, credentials are cached in their encrypted form, so while
+# activating this cache may reduce the number of queries made to the
+# underlying table, it may not  bring a significant reduction in the
+# latency of individual authentication attempts.
+# Defaults to 2000, set to 0 to disable credentials caching.
+credentials_validity_in_ms: 2000
+
+# Refresh interval for credentials cache (if enabled).
+# After this interval, cache entries become eligible for refresh. Upon next
+# access, an async reload is scheduled and the old value returned until it
+# completes. If credentials_validity_in_ms is non-zero, then this must be
+# also.
+# Defaults to the same value as credentials_validity_in_ms.
+# credentials_update_interval_in_ms: 2000
+
+# The partitioner is responsible for distributing groups of rows (by
+# partition key) across nodes in the cluster.  You should leave this
+# alone for new clusters.  The partitioner can NOT be changed without
+# reloading all data, so when upgrading you should set this to the
+# same partitioner you were already using.
+#
+# Besides Murmur3Partitioner, partitioners included for backwards
+# compatibility include RandomPartitioner, ByteOrderedPartitioner, and
+# OrderPreservingPartitioner.
+#
+partitioner: org.apache.cassandra.dht.Murmur3Partitioner
+
+# Directories where Cassandra should store data on disk.  Cassandra
+# will spread data evenly across them, subject to the granularity of
+# the configured compaction strategy.
+# If not set, the default directory is $CASSANDRA_HOME/data/data.
+data_file_directories:
+    - /var/lib/cassandra/data
+
+# commit log.  when running on magnetic HDD, this should be a
+# separate spindle than the data directories.
+# If not set, the default directory is $CASSANDRA_HOME/data/commitlog.
+commitlog_directory: /var/lib/cassandra/commitlog
+
+# Enable / disable CDC functionality on a per-node basis. This modifies the logic used
+# for write path allocation rejection (standard: never reject. cdc: reject Mutation
+# containing a CDC-enabled table if at space limit in cdc_raw_directory).
+cdc_enabled: false
+
+# CommitLogSegments are moved to this directory on flush if cdc_enabled: true and the
+# segment contains mutations for a CDC-enabled table. This should be placed on a
+# separate spindle than the data directories. If not set, the default directory is
+# $CASSANDRA_HOME/data/cdc_raw.
+# cdc_raw_directory: /var/lib/cassandra/cdc_raw
+
+# Policy for data disk failures:
+#
+# die
+#   shut down gossip and client transports and kill the JVM for any fs errors or
+#   single-sstable errors, so the node can be replaced.
+#
+# stop_paranoid
+#   shut down gossip and client transports even for single-sstable errors,
+#   kill the JVM for errors during startup.
+#
+# stop
+#   shut down gossip and client transports, leaving the node effectively dead, but
+#   can still be inspected via JMX, kill the JVM for errors during startup.
+#
+# best_effort
+#    stop using the failed disk and respond to requests based on
+#    remaining available sstables.  This means you WILL see obsolete
+#    data at CL.ONE!
+#
+# ignore
+#    ignore fatal errors and let requests fail, as in pre-1.2 Cassandra
+disk_failure_policy: stop
+
+# Policy for commit disk failures:
+#
+# die
+#   shut down gossip and Thrift and kill the JVM, so the node can be replaced.
+#
+# stop
+#   shut down gossip and Thrift, leaving the node effectively dead, but
+#   can still be inspected via JMX.
+#
+# stop_commit
+#   shutdown the commit log, letting writes collect but
+#   continuing to service reads, as in pre-2.0.5 Cassandra
+#
+# ignore
+#   ignore fatal errors and let the batches fail
+commit_failure_policy: stop
+
+# Maximum size of the native protocol prepared statement cache
+#
+# Valid values are either "auto" (omitting the value) or a value greater 0.
+#
+# Note that specifying a too large value will result in long running GCs and possbily
+# out-of-memory errors. Keep the value at a small fraction of the heap.
+#
+# If you constantly see "prepared statements discarded in the last minute because
+# cache limit reached" messages, the first step is to investigate the root cause
+# of these messages and check whether prepared statements are used correctly -
+# i.e. use bind markers for variable parts.
+#
+# Do only change the default value, if you really have more prepared statements than
+# fit in the cache. In most cases it is not neccessary to change this value.
+# Constantly re-preparing statements is a performance penalty.
+#
+# Default value ("auto") is 1/256th of the heap or 10MB, whichever is greater
+prepared_statements_cache_size_mb:
+
+# Maximum size of the Thrift prepared statement cache
+#
+# If you do not use Thrift at all, it is safe to leave this value at "auto".
+#
+# See description of 'prepared_statements_cache_size_mb' above for more information.
+#
+# Default value ("auto") is 1/256th of the heap or 10MB, whichever is greater
+thrift_prepared_statements_cache_size_mb:
+
+# Maximum size of the key cache in memory.
+#
+# Each key cache hit saves 1 seek and each row cache hit saves 2 seeks at the
+# minimum, sometimes more. The key cache is fairly tiny for the amount of
+# time it saves, so it's worthwhile to use it at large numbers.
+# The row cache saves even more time, but must contain the entire row,
+# so it is extremely space-intensive. It's best to only use the
+# row cache if you have hot rows or static rows.
+#
+# NOTE: if you reduce the size, you may not get you hottest keys loaded on startup.
+#
+# Default value is empty to make it "auto" (min(5% of Heap (in MB), 100MB)). Set to 0 to disable key cache.
+key_cache_size_in_mb:
+
+# Duration in seconds after which Cassandra should
+# save the key cache. Caches are saved to saved_caches_directory as
+# specified in this configuration file.
+#
+# Saved caches greatly improve cold-start speeds, and is relatively cheap in
+# terms of I/O for the key cache. Row cache saving is much more expensive and
+# has limited use.
+#
+# Default is 14400 or 4 hours.
+key_cache_save_period: 14400
+
+# Number of keys from the key cache to save
+# Disabled by default, meaning all keys are going to be saved
+# key_cache_keys_to_save: 100
+
+# Row cache implementation class name. Available implementations:
+#
+# org.apache.cassandra.cache.OHCProvider
+#   Fully off-heap row cache implementation (default).
+#
+# org.apache.cassandra.cache.SerializingCacheProvider
+#   This is the row cache implementation availabile
+#   in previous releases of Cassandra.
+# row_cache_class_name: org.apache.cassandra.cache.OHCProvider
+
+# Maximum size of the row cache in memory.
+# Please note that OHC cache implementation requires some additional off-heap memory to manage
+# the map structures and some in-flight memory during operations before/after cache entries can be
+# accounted against the cache capacity. This overhead is usually small compared to the whole capacity.
+# Do not specify more memory that the system can afford in the worst usual situation and leave some
+# headroom for OS block level cache. Do never allow your system to swap.
+#
+# Default value is 0, to disable row caching.
+row_cache_size_in_mb: 0
+
+# Duration in seconds after which Cassandra should save the row cache.
+# Caches are saved to saved_caches_directory as specified in this configuration file.
+#
+# Saved caches greatly improve cold-start speeds, and is relatively cheap in
+# terms of I/O for the key cache. Row cache saving is much more expensive and
+# has limited use.
+#
+# Default is 0 to disable saving the row cache.
+row_cache_save_period: 0
+
+# Number of keys from the row cache to save.
+# Specify 0 (which is the default), meaning all keys are going to be saved
+# row_cache_keys_to_save: 100
+
+# Maximum size of the counter cache in memory.
+#
+# Counter cache helps to reduce counter locks' contention for hot counter cells.
+# In case of RF = 1 a counter cache hit will cause Cassandra to skip the read before
+# write entirely. With RF > 1 a counter cache hit will still help to reduce the duration
+# of the lock hold, helping with hot counter cell updates, but will not allow skipping
+# the read entirely. Only the local (clock, count) tuple of a counter cell is kept
+# in memory, not the whole counter, so it's relatively cheap.
+#
+# NOTE: if you reduce the size, you may not get you hottest keys loaded on startup.
+#
+# Default value is empty to make it "auto" (min(2.5% of Heap (in MB), 50MB)). Set to 0 to disable counter cache.
+# NOTE: if you perform counter deletes and rely on low gcgs, you should disable the counter cache.
+counter_cache_size_in_mb:
+
+# Duration in seconds after which Cassandra should
+# save the counter cache (keys only). Caches are saved to saved_caches_directory as
+# specified in this configuration file.
+#
+# Default is 7200 or 2 hours.
+counter_cache_save_period: 7200
+
+# Number of keys from the counter cache to save
+# Disabled by default, meaning all keys are going to be saved
+# counter_cache_keys_to_save: 100
+
+# saved caches
+# If not set, the default directory is $CASSANDRA_HOME/data/saved_caches.
+saved_caches_directory: /var/lib/cassandra/saved_caches
+
+# commitlog_sync may be either "periodic" or "batch." 
+# 
+# When in batch mode, Cassandra won't ack writes until the commit log
+# has been fsynced to disk.  It will wait
+# commitlog_sync_batch_window_in_ms milliseconds between fsyncs.
+# This window should be kept short because the writer threads will
+# be unable to do extra work while waiting.  (You may need to increase
+# concurrent_writes for the same reason.)
+#
+# commitlog_sync: batch
+# commitlog_sync_batch_window_in_ms: 2
+#
+# the other option is "periodic" where writes may be acked immediately
+# and the CommitLog is simply synced every commitlog_sync_period_in_ms
+# milliseconds. 
+commitlog_sync: periodic
+commitlog_sync_period_in_ms: 10000
+
+# The size of the individual commitlog file segments.  A commitlog
+# segment may be archived, deleted, or recycled once all the data
+# in it (potentially from each columnfamily in the system) has been
+# flushed to sstables.
+#
+# The default size is 32, which is almost always fine, but if you are
+# archiving commitlog segments (see commitlog_archiving.properties),
+# then you probably want a finer granularity of archiving; 8 or 16 MB
+# is reasonable.
+# Max mutation size is also configurable via max_mutation_size_in_kb setting in
+# cassandra.yaml. The default is half the size commitlog_segment_size_in_mb * 1024.
+#
+# NOTE: If max_mutation_size_in_kb is set explicitly then commitlog_segment_size_in_mb must
+# be set to at least twice the size of max_mutation_size_in_kb / 1024
+#
+commitlog_segment_size_in_mb: 32
+
+# Compression to apply to the commit log. If omitted, the commit log
+# will be written uncompressed.  LZ4, Snappy, and Deflate compressors
+# are supported.
+# commitlog_compression:
+#   - class_name: LZ4Compressor
+#     parameters:
+#         -
+
+# any class that implements the SeedProvider interface and has a
+# constructor that takes a Map<String, String> of parameters will do.
+seed_provider:
+    # Addresses of hosts that are deemed contact points. 
+    # Cassandra nodes use this list of hosts to find each other and learn
+    # the topology of the ring.  You must change this if you are running
+    # multiple nodes!
+    - class_name: org.apache.cassandra.locator.SimpleSeedProvider
+      parameters:
+          # seeds is actually a comma-delimited list of addresses.
+          # Ex: "<ip1>,<ip2>,<ip3>"
+          - seeds: "{%- for member in database.members %}{{ member.host }},{%- endfor %}"
+
+# For workloads with more data than can fit in memory, Cassandra's
+# bottleneck will be reads that need to fetch data from
+# disk. "concurrent_reads" should be set to (16 * number_of_drives) in
+# order to allow the operations to enqueue low enough in the stack
+# that the OS and drives can reorder them. Same applies to
+# "concurrent_counter_writes", since counter writes read the current
+# values before incrementing and writing them back.
+#
+# On the other hand, since writes are almost never IO bound, the ideal
+# number of "concurrent_writes" is dependent on the number of cores in
+# your system; (8 * number_of_cores) is a good rule of thumb.
+concurrent_reads: 32
+concurrent_writes: 32
+concurrent_counter_writes: 32
+
+# For materialized view writes, as there is a read involved, so this should
+# be limited by the less of concurrent reads or concurrent writes.
+concurrent_materialized_view_writes: 32
+
+# Maximum memory to use for sstable chunk cache and buffer pooling.
+# 32MB of this are reserved for pooling buffers, the rest is used as an
+# cache that holds uncompressed sstable chunks.
+# Defaults to the smaller of 1/4 of heap or 512MB. This pool is allocated off-heap,
+# so is in addition to the memory allocated for heap. The cache also has on-heap
+# overhead which is roughly 128 bytes per chunk (i.e. 0.2% of the reserved size
+# if the default 64k chunk size is used).
+# Memory is only allocated when needed.
+# file_cache_size_in_mb: 512
+
+# Flag indicating whether to allocate on or off heap when the sstable buffer
+# pool is exhausted, that is when it has exceeded the maximum memory
+# file_cache_size_in_mb, beyond which it will not cache buffers but allocate on request.
+
+# buffer_pool_use_heap_if_exhausted: true
+
+# The strategy for optimizing disk read
+# Possible values are:
+# ssd (for solid state disks, the default)
+# spinning (for spinning disks)
+# disk_optimization_strategy: ssd
+
+# Total permitted memory to use for memtables. Cassandra will stop
+# accepting writes when the limit is exceeded until a flush completes,
+# and will trigger a flush based on memtable_cleanup_threshold
+# If omitted, Cassandra will set both to 1/4 the size of the heap.
+# memtable_heap_space_in_mb: 2048
+# memtable_offheap_space_in_mb: 2048
+
+# memtable_cleanup_threshold is deprecated. The default calculation
+# is the only reasonable choice. See the comments on  memtable_flush_writers
+# for more information.
+#
+# Ratio of occupied non-flushing memtable size to total permitted size
+# that will trigger a flush of the largest memtable. Larger mct will
+# mean larger flushes and hence less compaction, but also less concurrent
+# flush activity which can make it difficult to keep your disks fed
+# under heavy write load.
+#
+# memtable_cleanup_threshold defaults to 1 / (memtable_flush_writers + 1)
+# memtable_cleanup_threshold: 0.11
+
+# Specify the way Cassandra allocates and manages memtable memory.
+# Options are:
+#
+# heap_buffers
+#   on heap nio buffers
+#
+# offheap_buffers
+#   off heap (direct) nio buffers
+#
+# offheap_objects
+#    off heap objects
+memtable_allocation_type: heap_buffers
+
+# Total space to use for commit logs on disk.
+#
+# If space gets above this value, Cassandra will flush every dirty CF
+# in the oldest segment and remove it.  So a small total commitlog space
+# will tend to cause more flush activity on less-active columnfamilies.
+#
+# The default value is the smaller of 8192, and 1/4 of the total space
+# of the commitlog volume.
+#
+# commitlog_total_space_in_mb: 8192
+
+# This sets the number of memtable flush writer threads per disk
+# as well as the total number of memtables that can be flushed concurrently.
+# These are generally a combination of compute and IO bound.
+#
+# Memtable flushing is more CPU efficient than memtable ingest and a single thread
+# can keep up with the ingest rate of a whole server on a single fast disk
+# until it temporarily becomes IO bound under contention typically with compaction.
+# At that point you need multiple flush threads. At some point in the future
+# it may become CPU bound all the time.
+#
+# You can tell if flushing is falling behind using the MemtablePool.BlockedOnAllocation
+# metric which should be 0, but will be non-zero if threads are blocked waiting on flushing
+# to free memory.
+#
+# memtable_flush_writers defaults to two for a single data directory.
+# This means that two  memtables can be flushed concurrently to the single data directory.
+# If you have multiple data directories the default is one memtable flushing at a time
+# but the flush will use a thread per data directory so you will get two or more writers.
+#
+# Two is generally enough to flush on a fast disk [array] mounted as a single data directory.
+# Adding more flush writers will result in smaller more frequent flushes that introduce more
+# compaction overhead.
+#
+# There is a direct tradeoff between number of memtables that can be flushed concurrently
+# and flush size and frequency. More is not better you just need enough flush writers
+# to never stall waiting for flushing to free memory.
+#
+#memtable_flush_writers: 2
+
+# Total space to use for change-data-capture logs on disk.
+#
+# If space gets above this value, Cassandra will throw WriteTimeoutException
+# on Mutations including tables with CDC enabled. A CDCCompactor is responsible
+# for parsing the raw CDC logs and deleting them when parsing is completed.
+#
+# The default value is the min of 4096 mb and 1/8th of the total space
+# of the drive where cdc_raw_directory resides.
+# cdc_total_space_in_mb: 4096
+
+# When we hit our cdc_raw limit and the CDCCompactor is either running behind
+# or experiencing backpressure, we check at the following interval to see if any
+# new space for cdc-tracked tables has been made available. Default to 250ms
+# cdc_free_space_check_interval_ms: 250
+
+# A fixed memory pool size in MB for for SSTable index summaries. If left
+# empty, this will default to 5% of the heap size. If the memory usage of
+# all index summaries exceeds this limit, SSTables with low read rates will
+# shrink their index summaries in order to meet this limit.  However, this
+# is a best-effort process. In extreme conditions Cassandra may need to use
+# more than this amount of memory.
+index_summary_capacity_in_mb:
+
+# How frequently index summaries should be resampled.  This is done
+# periodically to redistribute memory from the fixed-size pool to sstables
+# proportional their recent read rates.  Setting to -1 will disable this
+# process, leaving existing index summaries at their current sampling level.
+index_summary_resize_interval_in_minutes: 60
+
+# Whether to, when doing sequential writing, fsync() at intervals in
+# order to force the operating system to flush the dirty
+# buffers. Enable this to avoid sudden dirty buffer flushing from
+# impacting read latencies. Almost always a good idea on SSDs; not
+# necessarily on platters.
+trickle_fsync: false
+trickle_fsync_interval_in_kb: 10240
+
+# TCP port, for commands and data
+# For security reasons, you should not expose this port to the internet.  Firewall it if needed.
+storage_port: 7010
+
+# SSL port, for encrypted communication.  Unused unless enabled in
+# encryption_options
+# For security reasons, you should not expose this port to the internet.  Firewall it if needed.
+ssl_storage_port: 7011
+
+# Address or interface to bind to and tell other Cassandra nodes to connect to.
+# You _must_ change this if you want multiple nodes to be able to communicate!
+#
+# Set listen_address OR listen_interface, not both.
+#
+# Leaving it blank leaves it up to InetAddress.getLocalHost(). This
+# will always do the Right Thing _if_ the node is properly configured
+# (hostname, name resolution, etc), and the Right Thing is to use the
+# address associated with the hostname (it might not be).
+#
+# Setting listen_address to 0.0.0.0 is always wrong.
+#
+{% if database.bind.interface is defined %}
+listen_interface: {{ database.bind.interface }}
+{% else %}
+listen_address: {{ database.bind.host }}
+{% endif %}
+
+# Set listen_address OR listen_interface, not both. Interfaces must correspond
+# to a single address, IP aliasing is not supported.
+# listen_interface: eth0
+
+# If you choose to specify the interface by name and the interface has an ipv4 and an ipv6 address
+# you can specify which should be chosen using listen_interface_prefer_ipv6. If false the first ipv4
+# address will be used. If true the first ipv6 address will be used. Defaults to false preferring
+# ipv4. If there is only one address it will be selected regardless of ipv4/ipv6.
+# listen_interface_prefer_ipv6: false
+
+# Address to broadcast to other Cassandra nodes
+# Leaving this blank will set it to the same value as listen_address
+# broadcast_address: 1.2.3.4
+
+# When using multiple physical network interfaces, set this
+# to true to listen on broadcast_address in addition to
+# the listen_address, allowing nodes to communicate in both
+# interfaces.
+# Ignore this property if the network configuration automatically
+# routes  between the public and private networks such as EC2.
+# listen_on_broadcast_address: false
+
+# Internode authentication backend, implementing IInternodeAuthenticator;
+# used to allow/disallow connections from peer nodes.
+# internode_authenticator: org.apache.cassandra.auth.AllowAllInternodeAuthenticator
+
+# Whether to start the native transport server.
+# Please note that the address on which the native transport is bound is the
+# same as the rpc_address. The port however is different and specified below.
+start_native_transport: true
+# port for the CQL native transport to listen for clients on
+# For security reasons, you should not expose this port to the internet.  Firewall it if needed.
+native_transport_port: {{ database.bind.get('port_configdb', database.bind.get('port', 9042)) }}
+# Enabling native transport encryption in client_encryption_options allows you to either use
+# encryption for the standard port or to use a dedicated, additional port along with the unencrypted
+# standard native_transport_port.
+# Enabling client encryption and keeping native_transport_port_ssl disabled will use encryption
+# for native_transport_port. Setting native_transport_port_ssl to a different value
+# from native_transport_port will use encryption for native_transport_port_ssl while
+# keeping native_transport_port unencrypted.
+# native_transport_port_ssl: 9142
+# The maximum threads for handling requests when the native transport is used.
+# This is similar to rpc_max_threads though the default differs slightly (and
+# there is no native_transport_min_threads, idle threads will always be stopped
+# after 30 seconds).
+# native_transport_max_threads: 128
+#
+# The maximum size of allowed frame. Frame (requests) larger than this will
+# be rejected as invalid. The default is 256MB. If you're changing this parameter,
+# you may want to adjust max_value_size_in_mb accordingly.
+# native_transport_max_frame_size_in_mb: 256
+
+# The maximum number of concurrent client connections.
+# The default is -1, which means unlimited.
+# native_transport_max_concurrent_connections: -1
+
+# The maximum number of concurrent client connections per source ip.
+# The default is -1, which means unlimited.
+# native_transport_max_concurrent_connections_per_ip: -1
+
+# Whether to start the thrift rpc server.
+start_rpc: true
+
+# The address or interface to bind the Thrift RPC service and native transport
+# server to.
+#
+# Set rpc_address OR rpc_interface, not both.
+#
+# Leaving rpc_address blank has the same effect as on listen_address
+# (i.e. it will be based on the configured hostname of the node).
+#
+# Note that unlike listen_address, you can specify 0.0.0.0, but you must also
+# set broadcast_rpc_address to a value other than 0.0.0.0.
+#
+# For security reasons, you should not expose this port to the internet.  Firewall it if needed.
+{% if database.bind.interface is defined %}
+rpc_interface: {{ database.bind.interface }}
+{% else %}
+rpc_address: {{ database.bind.host }}
+{% endif %}
+
+# Set rpc_address OR rpc_interface, not both. Interfaces must correspond
+# to a single address, IP aliasing is not supported.
+# rpc_interface: eth1
+
+# If you choose to specify the interface by name and the interface has an ipv4 and an ipv6 address
+# you can specify which should be chosen using rpc_interface_prefer_ipv6. If false the first ipv4
+# address will be used. If true the first ipv6 address will be used. Defaults to false preferring
+# ipv4. If there is only one address it will be selected regardless of ipv4/ipv6.
+# rpc_interface_prefer_ipv6: false
+
+# port for Thrift to listen for clients on
+rpc_port: {{ database.bind.get('rpc_port_configdb', database.bind.get('rpc_port', 9160)) }}
+
+# RPC address to broadcast to drivers and other Cassandra nodes. This cannot
+# be set to 0.0.0.0. If left blank, this will be set to the value of
+# rpc_address. If rpc_address is set to 0.0.0.0, broadcast_rpc_address must
+# be set.
+# broadcast_rpc_address: 1.2.3.4
+
+# enable or disable keepalive on rpc/native connections
+rpc_keepalive: true
+
+# Cassandra provides two out-of-the-box options for the RPC Server:
+#
+# sync
+#   One thread per thrift connection. For a very large number of clients, memory
+#   will be your limiting factor. On a 64 bit JVM, 180KB is the minimum stack size
+#   per thread, and that will correspond to your use of virtual memory (but physical memory
+#   may be limited depending on use of stack space).
+#
+# hsha
+#   Stands for "half synchronous, half asynchronous." All thrift clients are handled
+#   asynchronously using a small number of threads that does not vary with the amount
+#   of thrift clients (and thus scales well to many clients). The rpc requests are still
+#   synchronous (one thread per active request). If hsha is selected then it is essential
+#   that rpc_max_threads is changed from the default value of unlimited.
+#
+# The default is sync because on Windows hsha is about 30% slower.  On Linux,
+# sync/hsha performance is about the same, with hsha of course using less memory.
+#
+# Alternatively,  can provide your own RPC server by providing the fully-qualified class name
+# of an o.a.c.t.TServerFactory that can create an instance of it.
+rpc_server_type: sync
+
+# Uncomment rpc_min|max_thread to set request pool size limits.
+#
+# Regardless of your choice of RPC server (see above), the number of maximum requests in the
+# RPC thread pool dictates how many concurrent requests are possible (but if you are using the sync
+# RPC server, it also dictates the number of clients that can be connected at all).
+#
+# The default is unlimited and thus provides no protection against clients overwhelming the server. You are
+# encouraged to set a maximum that makes sense for you in production, but do keep in mind that
+# rpc_max_threads represents the maximum number of client requests this server may execute concurrently.
+#
+# rpc_min_threads: 16
+# rpc_max_threads: 2048
+
+# uncomment to set socket buffer sizes on rpc connections
+# rpc_send_buff_size_in_bytes:
+# rpc_recv_buff_size_in_bytes:
+
+# Uncomment to set socket buffer size for internode communication
+# Note that when setting this, the buffer size is limited by net.core.wmem_max
+# and when not setting it it is defined by net.ipv4.tcp_wmem
+# See also:
+# /proc/sys/net/core/wmem_max
+# /proc/sys/net/core/rmem_max
+# /proc/sys/net/ipv4/tcp_wmem
+# /proc/sys/net/ipv4/tcp_wmem
+# and 'man tcp'
+# internode_send_buff_size_in_bytes:
+
+# Uncomment to set socket buffer size for internode communication
+# Note that when setting this, the buffer size is limited by net.core.wmem_max
+# and when not setting it it is defined by net.ipv4.tcp_wmem
+# internode_recv_buff_size_in_bytes:
+
+# Frame size for thrift (maximum message length).
+thrift_framed_transport_size_in_mb: 15
+
+# Set to true to have Cassandra create a hard link to each sstable
+# flushed or streamed locally in a backups/ subdirectory of the
+# keyspace data.  Removing these links is the operator's
+# responsibility.
+incremental_backups: false
+
+# Whether or not to take a snapshot before each compaction.  Be
+# careful using this option, since Cassandra won't clean up the
+# snapshots for you.  Mostly useful if you're paranoid when there
+# is a data format change.
+snapshot_before_compaction: false
+
+# Whether or not a snapshot is taken of the data before keyspace truncation
+# or dropping of column families. The STRONGLY advised default of true 
+# should be used to provide data safety. If you set this flag to false, you will
+# lose data on truncation or drop.
+auto_snapshot: true
+
+# Granularity of the collation index of rows within a partition.
+# Increase if your rows are large, or if you have a very large
+# number of rows per partition.  The competing goals are these:
+#
+# - a smaller granularity means more index entries are generated
+#   and looking up rows withing the partition by collation column
+#   is faster
+# - but, Cassandra will keep the collation index in memory for hot
+#   rows (as part of the key cache), so a larger granularity means
+#   you can cache more hot rows
+column_index_size_in_kb: 64
+
+# Per sstable indexed key cache entries (the collation index in memory
+# mentioned above) exceeding this size will not be held on heap.
+# This means that only partition information is held on heap and the
+# index entries are read from disk.
+#
+# Note that this size refers to the size of the
+# serialized index information and not the size of the partition.
+column_index_cache_size_in_kb: 2
+
+# Number of simultaneous compactions to allow, NOT including
+# validation "compactions" for anti-entropy repair.  Simultaneous
+# compactions can help preserve read performance in a mixed read/write
+# workload, by mitigating the tendency of small sstables to accumulate
+# during a single long running compactions. The default is usually
+# fine and if you experience problems with compaction running too
+# slowly or too fast, you should look at
+# compaction_throughput_mb_per_sec first.
+#
+# concurrent_compactors defaults to the smaller of (number of disks,
+# number of cores), with a minimum of 2 and a maximum of 8.
+# 
+# If your data directories are backed by SSD, you should increase this
+# to the number of cores.
+#concurrent_compactors: 1
+{% if database.concurrent_compactors is defined %}
+concurrent_compactors: {{ database.concurrent_compactors }}
+{% endif %}
+
+# Throttles compaction to the given total throughput across the entire
+# system. The faster you insert data, the faster you need to compact in
+# order to keep the sstable count down, but in general, setting this to
+# 16 to 32 times the rate you are inserting data is more than sufficient.
+# Setting this to 0 disables throttling. Note that this account for all types
+# of compaction, including validation compaction.
+compaction_throughput_mb_per_sec: {{ database.compaction_throughput_mb_per_sec }}
+
+# When compacting, the replacement sstable(s) can be opened before they
+# are completely written, and used in place of the prior sstables for
+# any range that has been written. This helps to smoothly transfer reads 
+# between the sstables, reducing page cache churn and keeping hot rows hot
+sstable_preemptive_open_interval_in_mb: 50
+
+# Throttles all outbound streaming file transfers on this node to the
+# given total throughput in Mbps. This is necessary because Cassandra does
+# mostly sequential IO when streaming data during bootstrap or repair, which
+# can lead to saturating the network connection and degrading rpc performance.
+# When unset, the default is 200 Mbps or 25 MB/s.
+# stream_throughput_outbound_megabits_per_sec: 200
+
+# Throttles all streaming file transfer between the datacenters,
+# this setting allows users to throttle inter dc stream throughput in addition
+# to throttling all network stream traffic as configured with
+# stream_throughput_outbound_megabits_per_sec
+# When unset, the default is 200 Mbps or 25 MB/s
+# inter_dc_stream_throughput_outbound_megabits_per_sec: 200
+
+# How long the coordinator should wait for read operations to complete
+read_request_timeout_in_ms: 10000
+# How long the coordinator should wait for seq or index scans to complete
+range_request_timeout_in_ms: 10000
+# How long the coordinator should wait for writes to complete
+write_request_timeout_in_ms: 10000
+# How long the coordinator should wait for counter writes to complete
+counter_write_request_timeout_in_ms: 5000
+# How long a coordinator should continue to retry a CAS operation
+# that contends with other proposals for the same row
+cas_contention_timeout_in_ms: 1000
+# How long the coordinator should wait for truncates to complete
+# (This can be much longer, because unless auto_snapshot is disabled
+# we need to flush first so we can snapshot before removing the data.)
+truncate_request_timeout_in_ms: 60000
+# The default timeout for other, miscellaneous operations
+request_timeout_in_ms: 10000
+
+# How long before a node logs slow queries. Select queries that take longer than
+# this timeout to execute, will generate an aggregated log message, so that slow queries
+# can be identified. Set this value to zero to disable slow query logging.
+slow_query_log_timeout_in_ms: 500
+
+# Enable operation timeout information exchange between nodes to accurately
+# measure request timeouts.  If disabled, replicas will assume that requests
+# were forwarded to them instantly by the coordinator, which means that
+# under overload conditions we will waste that much extra time processing 
+# already-timed-out requests.
+#
+# Warning: before enabling this property make sure to ntp is installed
+# and the times are synchronized between the nodes.
+cross_node_timeout: false
+
+# Set keep-alive period for streaming
+# This node will send a keep-alive message periodically with this period.
+# If the node does not receive a keep-alive message from the peer for
+# 2 keep-alive cycles the stream session times out and fail
+# Default value is 300s (5 minutes), which means stalled stream
+# times out in 10 minutes by default
+# streaming_keep_alive_period_in_secs: 300
+
+# phi value that must be reached for a host to be marked down.
+# most users should never need to adjust this.
+# phi_convict_threshold: 8
+
+# endpoint_snitch -- Set this to a class that implements
+# IEndpointSnitch.  The snitch has two functions:
+#
+# - it teaches Cassandra enough about your network topology to route
+#   requests efficiently
+# - it allows Cassandra to spread replicas around your cluster to avoid
+#   correlated failures. It does this by grouping machines into
+#   "datacenters" and "racks."  Cassandra will do its best not to have
+#   more than one replica on the same "rack" (which may not actually
+#   be a physical location)
+#
+# CASSANDRA WILL NOT ALLOW YOU TO SWITCH TO AN INCOMPATIBLE SNITCH
+# ONCE DATA IS INSERTED INTO THE CLUSTER.  This would cause data loss.
+# This means that if you start with the default SimpleSnitch, which
+# locates every node on "rack1" in "datacenter1", your only options
+# if you need to add another datacenter are GossipingPropertyFileSnitch
+# (and the older PFS).  From there, if you want to migrate to an
+# incompatible snitch like Ec2Snitch you can do it by adding new nodes
+# under Ec2Snitch (which will locate them in a new "datacenter") and
+# decommissioning the old ones.
+#
+# Out of the box, Cassandra provides:
+#
+# SimpleSnitch:
+#    Treats Strategy order as proximity. This can improve cache
+#    locality when disabling read repair.  Only appropriate for
+#    single-datacenter deployments.
+#
+# GossipingPropertyFileSnitch
+#    This should be your go-to snitch for production use.  The rack
+#    and datacenter for the local node are defined in
+#    cassandra-rackdc.properties and propagated to other nodes via
+#    gossip.  If cassandra-topology.properties exists, it is used as a
+#    fallback, allowing migration from the PropertyFileSnitch.
+#
+# PropertyFileSnitch:
+#    Proximity is determined by rack and data center, which are
+#    explicitly configured in cassandra-topology.properties.
+#
+# Ec2Snitch:
+#    Appropriate for EC2 deployments in a single Region. Loads Region
+#    and Availability Zone information from the EC2 API. The Region is
+#    treated as the datacenter, and the Availability Zone as the rack.
+#    Only private IPs are used, so this will not work across multiple
+#    Regions.
+#
+# Ec2MultiRegionSnitch:
+#    Uses public IPs as broadcast_address to allow cross-region
+#    connectivity.  (Thus, you should set seed addresses to the public
+#    IP as well.) You will need to open the storage_port or
+#    ssl_storage_port on the public IP firewall.  (For intra-Region
+#    traffic, Cassandra will switch to the private IP after
+#    establishing a connection.)
+#
+# RackInferringSnitch:
+#    Proximity is determined by rack and data center, which are
+#    assumed to correspond to the 3rd and 2nd octet of each node's IP
+#    address, respectively.  Unless this happens to match your
+#    deployment conventions, this is best used as an example of
+#    writing a custom Snitch class and is provided in that spirit.
+#
+# You can use a custom Snitch by setting this to the full class name
+# of the snitch, which will be assumed to be on your classpath.
+endpoint_snitch: SimpleSnitch
+
+# controls how often to perform the more expensive part of host score
+# calculation
+dynamic_snitch_update_interval_in_ms: 100 
+# controls how often to reset all host scores, allowing a bad host to
+# possibly recover
+dynamic_snitch_reset_interval_in_ms: 600000
+# if set greater than zero and read_repair_chance is < 1.0, this will allow
+# 'pinning' of replicas to hosts in order to increase cache capacity.
+# The badness threshold will control how much worse the pinned host has to be
+# before the dynamic snitch will prefer other replicas over it.  This is
+# expressed as a double which represents a percentage.  Thus, a value of
+# 0.2 means Cassandra would continue to prefer the static snitch values
+# until the pinned host was 20% worse than the fastest.
+dynamic_snitch_badness_threshold: 0.1
+
+# request_scheduler -- Set this to a class that implements
+# RequestScheduler, which will schedule incoming client requests
+# according to the specific policy. This is useful for multi-tenancy
+# with a single Cassandra cluster.
+# NOTE: This is specifically for requests from the client and does
+# not affect inter node communication.
+# org.apache.cassandra.scheduler.NoScheduler - No scheduling takes place
+# org.apache.cassandra.scheduler.RoundRobinScheduler - Round robin of
+# client requests to a node with a separate queue for each
+# request_scheduler_id. The scheduler is further customized by
+# request_scheduler_options as described below.
+request_scheduler: org.apache.cassandra.scheduler.NoScheduler
+
+# Scheduler Options vary based on the type of scheduler
+#
+# NoScheduler
+#   Has no options
+#
+# RoundRobin
+#   throttle_limit
+#     The throttle_limit is the number of in-flight
+#     requests per client.  Requests beyond 
+#     that limit are queued up until
+#     running requests can complete.
+#     The value of 80 here is twice the number of
+#     concurrent_reads + concurrent_writes.
+#   default_weight
+#     default_weight is optional and allows for
+#     overriding the default which is 1.
+#   weights
+#     Weights are optional and will default to 1 or the
+#     overridden default_weight. The weight translates into how
+#     many requests are handled during each turn of the
+#     RoundRobin, based on the scheduler id.
+#
+# request_scheduler_options:
+#    throttle_limit: 80
+#    default_weight: 5
+#    weights:
+#      Keyspace1: 1
+#      Keyspace2: 5
+
+# request_scheduler_id -- An identifier based on which to perform
+# the request scheduling. Currently the only valid option is keyspace.
+# request_scheduler_id: keyspace
+
+# Enable or disable inter-node encryption
+# JVM defaults for supported SSL socket protocols and cipher suites can
+# be replaced using custom encryption options. This is not recommended
+# unless you have policies in place that dictate certain settings, or
+# need to disable vulnerable ciphers or protocols in case the JVM cannot
+# be updated.
+# FIPS compliant settings can be configured at JVM level and should not
+# involve changing encryption settings here:
+# https://docs.oracle.com/javase/8/docs/technotes/guides/security/jsse/FIPS.html
+# *NOTE* No custom encryption options are enabled at the moment
+# The available internode options are : all, none, dc, rack
+#
+# If set to dc cassandra will encrypt the traffic between the DCs
+# If set to rack cassandra will encrypt the traffic between the racks
+#
+# The passwords used in these options must match the passwords used when generating
+# the keystore and truststore.  For instructions on generating these files, see:
+# http://download.oracle.com/javase/6/docs/technotes/guides/security/jsse/JSSERefGuide.html#CreateKeystore
+#
+server_encryption_options:
+    internode_encryption: none
+    keystore: conf/.keystore
+    keystore_password: cassandra
+    truststore: conf/.truststore
+    truststore_password: cassandra
+    # More advanced defaults below:
+    # protocol: TLS
+    # algorithm: SunX509
+    # store_type: JKS
+    # cipher_suites: [TLS_RSA_WITH_AES_128_CBC_SHA,TLS_RSA_WITH_AES_256_CBC_SHA,TLS_DHE_RSA_WITH_AES_128_CBC_SHA,TLS_DHE_RSA_WITH_AES_256_CBC_SHA,TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA,TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA]
+    # require_client_auth: false
+    # require_endpoint_verification: false
+
+# enable or disable client/server encryption.
+client_encryption_options:
+    enabled: false
+    # If enabled and optional is set to true encrypted and unencrypted connections are handled.
+    optional: false
+    keystore: conf/.keystore
+    keystore_password: cassandra
+    # require_client_auth: false
+    # Set trustore and truststore_password if require_client_auth is true
+    # truststore: conf/.truststore
+    # truststore_password: cassandra
+    # More advanced defaults below:
+    # protocol: TLS
+    # algorithm: SunX509
+    # store_type: JKS
+    # cipher_suites: [TLS_RSA_WITH_AES_128_CBC_SHA,TLS_RSA_WITH_AES_256_CBC_SHA,TLS_DHE_RSA_WITH_AES_128_CBC_SHA,TLS_DHE_RSA_WITH_AES_256_CBC_SHA,TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA,TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA]
+
+# internode_compression controls whether traffic between nodes is
+# compressed.
+# Can be:
+#
+# all
+#   all traffic is compressed
+#
+# dc
+#   traffic between different datacenters is compressed
+#
+# none
+#   nothing is compressed.
+internode_compression: all
+
+# Enable or disable tcp_nodelay for inter-dc communication.
+# Disabling it will result in larger (but fewer) network packets being sent,
+# reducing overhead from the TCP protocol itself, at the cost of increasing
+# latency if you block for cross-datacenter responses.
+inter_dc_tcp_nodelay: true
+
+# TTL for different trace types used during logging of the repair process.
+tracetype_query_ttl: 86400
+tracetype_repair_ttl: 604800
+
+# By default, Cassandra logs GC Pauses greater than 200 ms at INFO level
+# This threshold can be adjusted to minimize logging if necessary
+# gc_log_threshold_in_ms: 200
+
+# If unset, all GC Pauses greater than gc_log_threshold_in_ms will log at
+# INFO level
+# UDFs (user defined functions) are disabled by default.
+# As of Cassandra 3.0 there is a sandbox in place that should prevent execution of evil code.
+enable_user_defined_functions: false
+
+# Enables scripted UDFs (JavaScript UDFs).
+# Java UDFs are always enabled, if enable_user_defined_functions is true.
+# Enable this option to be able to use UDFs with "language javascript" or any custom JSR-223 provider.
+# This option has no effect, if enable_user_defined_functions is false.
+enable_scripted_user_defined_functions: false
+
+# The default Windows kernel timer and scheduling resolution is 15.6ms for power conservation.
+# Lowering this value on Windows can provide much tighter latency and better throughput, however
+# some virtualized environments may see a negative performance impact from changing this setting
+# below their system default. The sysinternals 'clockres' tool can confirm your system's default
+# setting.
+windows_timer_interval: 1
+
+
+# Enables encrypting data at-rest (on disk). Different key providers can be plugged in, but the default reads from
+# a JCE-style keystore. A single keystore can hold multiple keys, but the one referenced by
+# the "key_alias" is the only key that will be used for encrypt opertaions; previously used keys
+# can still (and should!) be in the keystore and will be used on decrypt operations
+# (to handle the case of key rotation).
+#
+# It is strongly recommended to download and install Java Cryptography Extension (JCE)
+# Unlimited Strength Jurisdiction Policy Files for your version of the JDK.
+# (current link: http://www.oracle.com/technetwork/java/javase/downloads/jce8-download-2133166.html)
+#
+# Currently, only the following file types are supported for transparent data encryption, although
+# more are coming in future cassandra releases: commitlog, hints
+transparent_data_encryption_options:
+    enabled: false
+    chunk_length_kb: 64
+    cipher: AES/CBC/PKCS5Padding
+    key_alias: testing:1
+    # CBC IV length for AES needs to be 16 bytes (which is also the default size)
+    # iv_length: 16
+    key_provider: 
+      - class_name: org.apache.cassandra.security.JKSKeyProvider
+        parameters: 
+          - keystore: conf/.keystore
+            keystore_password: cassandra
+            store_type: JCEKS
+            key_password: cassandra
+
+
+#####################
+# SAFETY THRESHOLDS #
+#####################
+
+# When executing a scan, within or across a partition, we need to keep the
+# tombstones seen in memory so we can return them to the coordinator, which
+# will use them to make sure other replicas also know about the deleted rows.
+# With workloads that generate a lot of tombstones, this can cause performance
+# problems and even exaust the server heap.
+# (http://www.datastax.com/dev/blog/cassandra-anti-patterns-queues-and-queue-like-datasets)
+# Adjust the thresholds here if you understand the dangers and want to
+# scan more tombstones anyway.  These thresholds may also be adjusted at runtime
+# using the StorageService mbean.
+tombstone_warn_threshold: 1000
+tombstone_failure_threshold: 100000
+
+# Log WARN on any multiple-partition batch size exceeding this value. 5kb per batch by default.
+# Caution should be taken on increasing the size of this threshold as it can lead to node instability.
+batch_size_warn_threshold_in_kb: 5
+
+# Fail any multiple-partition batch exceeding this value. 50kb (10x warn threshold) by default.
+batch_size_fail_threshold_in_kb: 50
+
+# Log WARN on any batches not of type LOGGED than span across more partitions than this limit
+unlogged_batch_across_partitions_warn_threshold: 10
+
+# Log a warning when compacting partitions larger than this value
+compaction_large_partition_warning_threshold_mb: 100
+
+# GC Pauses greater than gc_warn_threshold_in_ms will be logged at WARN level
+# Adjust the threshold based on your application throughput requirement
+# By default, Cassandra logs GC Pauses greater than 200 ms at INFO level
+gc_warn_threshold_in_ms: 1000
+
+# Maximum size of any value in SSTables. Safety measure to detect SSTable corruption
+# early. Any value size larger than this threshold will result into marking an SSTable
+# as corrupted.
+# max_value_size_in_mb: 256
+
+# Back-pressure settings #
+# If enabled, the coordinator will apply the back-pressure strategy specified below to each mutation
+# sent to replicas, with the aim of reducing pressure on overloaded replicas.
+back_pressure_enabled: false
+# The back-pressure strategy applied.
+# The default implementation, RateBasedBackPressure, takes three arguments:
+# high ratio, factor, and flow type, and uses the ratio between incoming mutation responses and outgoing mutation requests.
+# If below high ratio, outgoing mutations are rate limited according to the incoming rate decreased by the given factor;
+# if above high ratio, the rate limiting is increased by the given factor;
+# such factor is usually best configured between 1 and 10, use larger values for a faster recovery
+# at the expense of potentially more dropped mutations;
+# the rate limiting is applied according to the flow type: if FAST, it's rate limited at the speed of the fastest replica,
+# if SLOW at the speed of the slowest one.
+# New strategies can be added. Implementors need to implement org.apache.cassandra.net.BackpressureStrategy and
+# provide a public constructor accepting a Map<String, Object>.
+back_pressure_strategy:
+    - class_name: org.apache.cassandra.net.RateBasedBackPressure
+      parameters:
+        - high_ratio: 0.90
+          factor: 5
+          flow: FAST
diff --git a/opencontrail/files/cassandra/3.10/cassandra_analytics.yaml b/opencontrail/files/cassandra/3.10/cassandra_analytics.yaml
new file mode 100644
index 0000000..db38900
--- /dev/null
+++ b/opencontrail/files/cassandra/3.10/cassandra_analytics.yaml
@@ -0,0 +1,1208 @@
+{%- from "opencontrail/map.jinja" import database with context %}
+# Cassandra storage config YAML
+
+# NOTE:
+#   See http://wiki.apache.org/cassandra/StorageConfiguration for
+#   full explanations of configuration directives
+# /NOTE
+
+# The name of the cluster. This is mainly used to prevent machines in
+# one logical cluster from joining another.
+cluster_name: '{{ database.name }}'
+
+# This defines the number of tokens randomly assigned to this node on the ring
+# The more tokens, relative to other nodes, the larger the proportion of data
+# that this node will store. You probably want all nodes to have the same number
+# of tokens assuming they have equal hardware capability.
+#
+# If you leave this unspecified, Cassandra will use the default of 1 token for legacy compatibility,
+# and will use the initial_token as described below.
+#
+# Specifying initial_token will override this setting on the node's initial start,
+# on subsequent starts, this setting will apply even if initial token is set.
+#
+# If you already have a cluster with 1 token per node, and wish to migrate to 
+# multiple tokens per node, see http://wiki.apache.org/cassandra/Operations
+num_tokens: 256
+
+# Triggers automatic allocation of num_tokens tokens for this node. The allocation
+# algorithm attempts to choose tokens in a way that optimizes replicated load over
+# the nodes in the datacenter for the replication strategy used by the specified
+# keyspace.
+#
+# The load assigned to each node will be close to proportional to its number of
+# vnodes.
+#
+# Only supported with the Murmur3Partitioner.
+# allocate_tokens_for_keyspace: KEYSPACE
+
+# initial_token allows you to specify tokens manually.  While you can use it with
+# vnodes (num_tokens > 1, above) -- in which case you should provide a 
+# comma-separated list -- it's primarily used when adding nodes to legacy clusters 
+# that do not have vnodes enabled.
+# initial_token:
+
+# See http://wiki.apache.org/cassandra/HintedHandoff
+# May either be "true" or "false" to enable globally
+hinted_handoff_enabled: true
+
+# When hinted_handoff_enabled is true, a black list of data centers that will not
+# perform hinted handoff
+# hinted_handoff_disabled_datacenters:
+#    - DC1
+#    - DC2
+
+# this defines the maximum amount of time a dead host will have hints
+# generated.  After it has been dead this long, new hints for it will not be
+# created until it has been seen alive and gone down again.
+max_hint_window_in_ms: 10800000 # 3 hours
+
+# Maximum throttle in KBs per second, per delivery thread.  This will be
+# reduced proportionally to the number of nodes in the cluster.  (If there
+# are two nodes in the cluster, each delivery thread will use the maximum
+# rate; if there are three, each will throttle to half of the maximum,
+# since we expect two nodes to be delivering hints simultaneously.)
+hinted_handoff_throttle_in_kb: 1024
+
+# Number of threads with which to deliver hints;
+# Consider increasing this number when you have multi-dc deployments, since
+# cross-dc handoff tends to be slower
+max_hints_delivery_threads: 2
+
+# Directory where Cassandra should store hints.
+# If not set, the default directory is $CASSANDRA_HOME/data/hints.
+# hints_directory: /var/lib/cassandra/hints
+
+# How often hints should be flushed from the internal buffers to disk.
+# Will *not* trigger fsync.
+hints_flush_period_in_ms: 10000
+
+# Maximum size for a single hints file, in megabytes.
+max_hints_file_size_in_mb: 128
+
+# Compression to apply to the hint files. If omitted, hints files
+# will be written uncompressed. LZ4, Snappy, and Deflate compressors
+# are supported.
+#hints_compression:
+#   - class_name: LZ4Compressor
+#     parameters:
+#         -
+
+# Maximum throttle in KBs per second, total. This will be
+# reduced proportionally to the number of nodes in the cluster.
+batchlog_replay_throttle_in_kb: 1024
+
+# Authentication backend, implementing IAuthenticator; used to identify users
+# Out of the box, Cassandra provides org.apache.cassandra.auth.{AllowAllAuthenticator,
+# PasswordAuthenticator}.
+#
+# - AllowAllAuthenticator performs no checks - set it to disable authentication.
+# - PasswordAuthenticator relies on username/password pairs to authenticate
+#   users. It keeps usernames and hashed passwords in system_auth.roles table.
+#   Please increase system_auth keyspace replication factor if you use this authenticator.
+#   If using PasswordAuthenticator, CassandraRoleManager must also be used (see below)
+authenticator: AllowAllAuthenticator
+
+# Authorization backend, implementing IAuthorizer; used to limit access/provide permissions
+# Out of the box, Cassandra provides org.apache.cassandra.auth.{AllowAllAuthorizer,
+# CassandraAuthorizer}.
+#
+# - AllowAllAuthorizer allows any action to any user - set it to disable authorization.
+# - CassandraAuthorizer stores permissions in system_auth.role_permissions table. Please
+#   increase system_auth keyspace replication factor if you use this authorizer.
+authorizer: AllowAllAuthorizer
+
+# Part of the Authentication & Authorization backend, implementing IRoleManager; used
+# to maintain grants and memberships between roles.
+# Out of the box, Cassandra provides org.apache.cassandra.auth.CassandraRoleManager,
+# which stores role information in the system_auth keyspace. Most functions of the
+# IRoleManager require an authenticated login, so unless the configured IAuthenticator
+# actually implements authentication, most of this functionality will be unavailable.
+#
+# - CassandraRoleManager stores role data in the system_auth keyspace. Please
+#   increase system_auth keyspace replication factor if you use this role manager.
+role_manager: CassandraRoleManager
+
+# Validity period for roles cache (fetching granted roles can be an expensive
+# operation depending on the role manager, CassandraRoleManager is one example)
+# Granted roles are cached for authenticated sessions in AuthenticatedUser and
+# after the period specified here, become eligible for (async) reload.
+# Defaults to 2000, set to 0 to disable caching entirely.
+# Will be disabled automatically for AllowAllAuthenticator.
+roles_validity_in_ms: 2000
+
+# Refresh interval for roles cache (if enabled).
+# After this interval, cache entries become eligible for refresh. Upon next
+# access, an async reload is scheduled and the old value returned until it
+# completes. If roles_validity_in_ms is non-zero, then this must be
+# also.
+# Defaults to the same value as roles_validity_in_ms.
+# roles_update_interval_in_ms: 2000
+
+# Validity period for permissions cache (fetching permissions can be an
+# expensive operation depending on the authorizer, CassandraAuthorizer is
+# one example). Defaults to 2000, set to 0 to disable.
+# Will be disabled automatically for AllowAllAuthorizer.
+permissions_validity_in_ms: 2000
+
+# Refresh interval for permissions cache (if enabled).
+# After this interval, cache entries become eligible for refresh. Upon next
+# access, an async reload is scheduled and the old value returned until it
+# completes. If permissions_validity_in_ms is non-zero, then this must be
+# also.
+# Defaults to the same value as permissions_validity_in_ms.
+# permissions_update_interval_in_ms: 2000
+
+# Validity period for credentials cache. This cache is tightly coupled to
+# the provided PasswordAuthenticator implementation of IAuthenticator. If
+# another IAuthenticator implementation is configured, this cache will not
+# be automatically used and so the following settings will have no effect.
+# Please note, credentials are cached in their encrypted form, so while
+# activating this cache may reduce the number of queries made to the
+# underlying table, it may not  bring a significant reduction in the
+# latency of individual authentication attempts.
+# Defaults to 2000, set to 0 to disable credentials caching.
+credentials_validity_in_ms: 2000
+
+# Refresh interval for credentials cache (if enabled).
+# After this interval, cache entries become eligible for refresh. Upon next
+# access, an async reload is scheduled and the old value returned until it
+# completes. If credentials_validity_in_ms is non-zero, then this must be
+# also.
+# Defaults to the same value as credentials_validity_in_ms.
+# credentials_update_interval_in_ms: 2000
+
+# The partitioner is responsible for distributing groups of rows (by
+# partition key) across nodes in the cluster.  You should leave this
+# alone for new clusters.  The partitioner can NOT be changed without
+# reloading all data, so when upgrading you should set this to the
+# same partitioner you were already using.
+#
+# Besides Murmur3Partitioner, partitioners included for backwards
+# compatibility include RandomPartitioner, ByteOrderedPartitioner, and
+# OrderPreservingPartitioner.
+#
+partitioner: org.apache.cassandra.dht.Murmur3Partitioner
+
+# Directories where Cassandra should store data on disk.  Cassandra
+# will spread data evenly across them, subject to the granularity of
+# the configured compaction strategy.
+# If not set, the default directory is $CASSANDRA_HOME/data/data.
+data_file_directories:
+    - /var/lib/cassandra/data
+
+# commit log.  when running on magnetic HDD, this should be a
+# separate spindle than the data directories.
+# If not set, the default directory is $CASSANDRA_HOME/data/commitlog.
+commitlog_directory: /var/lib/cassandra/commitlog
+
+# Enable / disable CDC functionality on a per-node basis. This modifies the logic used
+# for write path allocation rejection (standard: never reject. cdc: reject Mutation
+# containing a CDC-enabled table if at space limit in cdc_raw_directory).
+cdc_enabled: false
+
+# CommitLogSegments are moved to this directory on flush if cdc_enabled: true and the
+# segment contains mutations for a CDC-enabled table. This should be placed on a
+# separate spindle than the data directories. If not set, the default directory is
+# $CASSANDRA_HOME/data/cdc_raw.
+# cdc_raw_directory: /var/lib/cassandra/cdc_raw
+
+# Policy for data disk failures:
+#
+# die
+#   shut down gossip and client transports and kill the JVM for any fs errors or
+#   single-sstable errors, so the node can be replaced.
+#
+# stop_paranoid
+#   shut down gossip and client transports even for single-sstable errors,
+#   kill the JVM for errors during startup.
+#
+# stop
+#   shut down gossip and client transports, leaving the node effectively dead, but
+#   can still be inspected via JMX, kill the JVM for errors during startup.
+#
+# best_effort
+#    stop using the failed disk and respond to requests based on
+#    remaining available sstables.  This means you WILL see obsolete
+#    data at CL.ONE!
+#
+# ignore
+#    ignore fatal errors and let requests fail, as in pre-1.2 Cassandra
+disk_failure_policy: stop
+
+# Policy for commit disk failures:
+#
+# die
+#   shut down gossip and Thrift and kill the JVM, so the node can be replaced.
+#
+# stop
+#   shut down gossip and Thrift, leaving the node effectively dead, but
+#   can still be inspected via JMX.
+#
+# stop_commit
+#   shutdown the commit log, letting writes collect but
+#   continuing to service reads, as in pre-2.0.5 Cassandra
+#
+# ignore
+#   ignore fatal errors and let the batches fail
+commit_failure_policy: stop
+
+# Maximum size of the native protocol prepared statement cache
+#
+# Valid values are either "auto" (omitting the value) or a value greater 0.
+#
+# Note that specifying a too large value will result in long running GCs and possbily
+# out-of-memory errors. Keep the value at a small fraction of the heap.
+#
+# If you constantly see "prepared statements discarded in the last minute because
+# cache limit reached" messages, the first step is to investigate the root cause
+# of these messages and check whether prepared statements are used correctly -
+# i.e. use bind markers for variable parts.
+#
+# Do only change the default value, if you really have more prepared statements than
+# fit in the cache. In most cases it is not neccessary to change this value.
+# Constantly re-preparing statements is a performance penalty.
+#
+# Default value ("auto") is 1/256th of the heap or 10MB, whichever is greater
+prepared_statements_cache_size_mb:
+
+# Maximum size of the Thrift prepared statement cache
+#
+# If you do not use Thrift at all, it is safe to leave this value at "auto".
+#
+# See description of 'prepared_statements_cache_size_mb' above for more information.
+#
+# Default value ("auto") is 1/256th of the heap or 10MB, whichever is greater
+thrift_prepared_statements_cache_size_mb:
+
+# Maximum size of the key cache in memory.
+#
+# Each key cache hit saves 1 seek and each row cache hit saves 2 seeks at the
+# minimum, sometimes more. The key cache is fairly tiny for the amount of
+# time it saves, so it's worthwhile to use it at large numbers.
+# The row cache saves even more time, but must contain the entire row,
+# so it is extremely space-intensive. It's best to only use the
+# row cache if you have hot rows or static rows.
+#
+# NOTE: if you reduce the size, you may not get you hottest keys loaded on startup.
+#
+# Default value is empty to make it "auto" (min(5% of Heap (in MB), 100MB)). Set to 0 to disable key cache.
+key_cache_size_in_mb:
+
+# Duration in seconds after which Cassandra should
+# save the key cache. Caches are saved to saved_caches_directory as
+# specified in this configuration file.
+#
+# Saved caches greatly improve cold-start speeds, and is relatively cheap in
+# terms of I/O for the key cache. Row cache saving is much more expensive and
+# has limited use.
+#
+# Default is 14400 or 4 hours.
+key_cache_save_period: 14400
+
+# Number of keys from the key cache to save
+# Disabled by default, meaning all keys are going to be saved
+# key_cache_keys_to_save: 100
+
+# Row cache implementation class name. Available implementations:
+#
+# org.apache.cassandra.cache.OHCProvider
+#   Fully off-heap row cache implementation (default).
+#
+# org.apache.cassandra.cache.SerializingCacheProvider
+#   This is the row cache implementation availabile
+#   in previous releases of Cassandra.
+# row_cache_class_name: org.apache.cassandra.cache.OHCProvider
+
+# Maximum size of the row cache in memory.
+# Please note that OHC cache implementation requires some additional off-heap memory to manage
+# the map structures and some in-flight memory during operations before/after cache entries can be
+# accounted against the cache capacity. This overhead is usually small compared to the whole capacity.
+# Do not specify more memory that the system can afford in the worst usual situation and leave some
+# headroom for OS block level cache. Do never allow your system to swap.
+#
+# Default value is 0, to disable row caching.
+row_cache_size_in_mb: 0
+
+# Duration in seconds after which Cassandra should save the row cache.
+# Caches are saved to saved_caches_directory as specified in this configuration file.
+#
+# Saved caches greatly improve cold-start speeds, and is relatively cheap in
+# terms of I/O for the key cache. Row cache saving is much more expensive and
+# has limited use.
+#
+# Default is 0 to disable saving the row cache.
+row_cache_save_period: 0
+
+# Number of keys from the row cache to save.
+# Specify 0 (which is the default), meaning all keys are going to be saved
+# row_cache_keys_to_save: 100
+
+# Maximum size of the counter cache in memory.
+#
+# Counter cache helps to reduce counter locks' contention for hot counter cells.
+# In case of RF = 1 a counter cache hit will cause Cassandra to skip the read before
+# write entirely. With RF > 1 a counter cache hit will still help to reduce the duration
+# of the lock hold, helping with hot counter cell updates, but will not allow skipping
+# the read entirely. Only the local (clock, count) tuple of a counter cell is kept
+# in memory, not the whole counter, so it's relatively cheap.
+#
+# NOTE: if you reduce the size, you may not get you hottest keys loaded on startup.
+#
+# Default value is empty to make it "auto" (min(2.5% of Heap (in MB), 50MB)). Set to 0 to disable counter cache.
+# NOTE: if you perform counter deletes and rely on low gcgs, you should disable the counter cache.
+counter_cache_size_in_mb:
+
+# Duration in seconds after which Cassandra should
+# save the counter cache (keys only). Caches are saved to saved_caches_directory as
+# specified in this configuration file.
+#
+# Default is 7200 or 2 hours.
+counter_cache_save_period: 7200
+
+# Number of keys from the counter cache to save
+# Disabled by default, meaning all keys are going to be saved
+# counter_cache_keys_to_save: 100
+
+# saved caches
+# If not set, the default directory is $CASSANDRA_HOME/data/saved_caches.
+saved_caches_directory: /var/lib/cassandra/saved_caches
+
+# commitlog_sync may be either "periodic" or "batch." 
+# 
+# When in batch mode, Cassandra won't ack writes until the commit log
+# has been fsynced to disk.  It will wait
+# commitlog_sync_batch_window_in_ms milliseconds between fsyncs.
+# This window should be kept short because the writer threads will
+# be unable to do extra work while waiting.  (You may need to increase
+# concurrent_writes for the same reason.)
+#
+# commitlog_sync: batch
+# commitlog_sync_batch_window_in_ms: 2
+#
+# the other option is "periodic" where writes may be acked immediately
+# and the CommitLog is simply synced every commitlog_sync_period_in_ms
+# milliseconds. 
+commitlog_sync: periodic
+commitlog_sync_period_in_ms: 10000
+
+# The size of the individual commitlog file segments.  A commitlog
+# segment may be archived, deleted, or recycled once all the data
+# in it (potentially from each columnfamily in the system) has been
+# flushed to sstables.
+#
+# The default size is 32, which is almost always fine, but if you are
+# archiving commitlog segments (see commitlog_archiving.properties),
+# then you probably want a finer granularity of archiving; 8 or 16 MB
+# is reasonable.
+# Max mutation size is also configurable via max_mutation_size_in_kb setting in
+# cassandra.yaml. The default is half the size commitlog_segment_size_in_mb * 1024.
+#
+# NOTE: If max_mutation_size_in_kb is set explicitly then commitlog_segment_size_in_mb must
+# be set to at least twice the size of max_mutation_size_in_kb / 1024
+#
+commitlog_segment_size_in_mb: 32
+
+# Compression to apply to the commit log. If omitted, the commit log
+# will be written uncompressed.  LZ4, Snappy, and Deflate compressors
+# are supported.
+# commitlog_compression:
+#   - class_name: LZ4Compressor
+#     parameters:
+#         -
+
+# any class that implements the SeedProvider interface and has a
+# constructor that takes a Map<String, String> of parameters will do.
+seed_provider:
+    # Addresses of hosts that are deemed contact points. 
+    # Cassandra nodes use this list of hosts to find each other and learn
+    # the topology of the ring.  You must change this if you are running
+    # multiple nodes!
+    - class_name: org.apache.cassandra.locator.SimpleSeedProvider
+      parameters:
+          # seeds is actually a comma-delimited list of addresses.
+          # Ex: "<ip1>,<ip2>,<ip3>"
+          - seeds: "{%- for member in database.members %}{{ member.host }},{%- endfor %}"
+
+# For workloads with more data than can fit in memory, Cassandra's
+# bottleneck will be reads that need to fetch data from
+# disk. "concurrent_reads" should be set to (16 * number_of_drives) in
+# order to allow the operations to enqueue low enough in the stack
+# that the OS and drives can reorder them. Same applies to
+# "concurrent_counter_writes", since counter writes read the current
+# values before incrementing and writing them back.
+#
+# On the other hand, since writes are almost never IO bound, the ideal
+# number of "concurrent_writes" is dependent on the number of cores in
+# your system; (8 * number_of_cores) is a good rule of thumb.
+concurrent_reads: 32
+concurrent_writes: 32
+concurrent_counter_writes: 32
+
+# For materialized view writes, as there is a read involved, so this should
+# be limited by the less of concurrent reads or concurrent writes.
+concurrent_materialized_view_writes: 32
+
+# Maximum memory to use for sstable chunk cache and buffer pooling.
+# 32MB of this are reserved for pooling buffers, the rest is used as an
+# cache that holds uncompressed sstable chunks.
+# Defaults to the smaller of 1/4 of heap or 512MB. This pool is allocated off-heap,
+# so is in addition to the memory allocated for heap. The cache also has on-heap
+# overhead which is roughly 128 bytes per chunk (i.e. 0.2% of the reserved size
+# if the default 64k chunk size is used).
+# Memory is only allocated when needed.
+# file_cache_size_in_mb: 512
+
+# Flag indicating whether to allocate on or off heap when the sstable buffer
+# pool is exhausted, that is when it has exceeded the maximum memory
+# file_cache_size_in_mb, beyond which it will not cache buffers but allocate on request.
+
+# buffer_pool_use_heap_if_exhausted: true
+
+# The strategy for optimizing disk read
+# Possible values are:
+# ssd (for solid state disks, the default)
+# spinning (for spinning disks)
+# disk_optimization_strategy: ssd
+
+# Total permitted memory to use for memtables. Cassandra will stop
+# accepting writes when the limit is exceeded until a flush completes,
+# and will trigger a flush based on memtable_cleanup_threshold
+# If omitted, Cassandra will set both to 1/4 the size of the heap.
+# memtable_heap_space_in_mb: 2048
+# memtable_offheap_space_in_mb: 2048
+
+# memtable_cleanup_threshold is deprecated. The default calculation
+# is the only reasonable choice. See the comments on  memtable_flush_writers
+# for more information.
+#
+# Ratio of occupied non-flushing memtable size to total permitted size
+# that will trigger a flush of the largest memtable. Larger mct will
+# mean larger flushes and hence less compaction, but also less concurrent
+# flush activity which can make it difficult to keep your disks fed
+# under heavy write load.
+#
+# memtable_cleanup_threshold defaults to 1 / (memtable_flush_writers + 1)
+# memtable_cleanup_threshold: 0.11
+
+# Specify the way Cassandra allocates and manages memtable memory.
+# Options are:
+#
+# heap_buffers
+#   on heap nio buffers
+#
+# offheap_buffers
+#   off heap (direct) nio buffers
+#
+# offheap_objects
+#    off heap objects
+memtable_allocation_type: heap_buffers
+
+# Total space to use for commit logs on disk.
+#
+# If space gets above this value, Cassandra will flush every dirty CF
+# in the oldest segment and remove it.  So a small total commitlog space
+# will tend to cause more flush activity on less-active columnfamilies.
+#
+# The default value is the smaller of 8192, and 1/4 of the total space
+# of the commitlog volume.
+#
+# commitlog_total_space_in_mb: 8192
+
+# This sets the number of memtable flush writer threads per disk
+# as well as the total number of memtables that can be flushed concurrently.
+# These are generally a combination of compute and IO bound.
+#
+# Memtable flushing is more CPU efficient than memtable ingest and a single thread
+# can keep up with the ingest rate of a whole server on a single fast disk
+# until it temporarily becomes IO bound under contention typically with compaction.
+# At that point you need multiple flush threads. At some point in the future
+# it may become CPU bound all the time.
+#
+# You can tell if flushing is falling behind using the MemtablePool.BlockedOnAllocation
+# metric which should be 0, but will be non-zero if threads are blocked waiting on flushing
+# to free memory.
+#
+# memtable_flush_writers defaults to two for a single data directory.
+# This means that two  memtables can be flushed concurrently to the single data directory.
+# If you have multiple data directories the default is one memtable flushing at a time
+# but the flush will use a thread per data directory so you will get two or more writers.
+#
+# Two is generally enough to flush on a fast disk [array] mounted as a single data directory.
+# Adding more flush writers will result in smaller more frequent flushes that introduce more
+# compaction overhead.
+#
+# There is a direct tradeoff between number of memtables that can be flushed concurrently
+# and flush size and frequency. More is not better you just need enough flush writers
+# to never stall waiting for flushing to free memory.
+#
+#memtable_flush_writers: 2
+
+# Total space to use for change-data-capture logs on disk.
+#
+# If space gets above this value, Cassandra will throw WriteTimeoutException
+# on Mutations including tables with CDC enabled. A CDCCompactor is responsible
+# for parsing the raw CDC logs and deleting them when parsing is completed.
+#
+# The default value is the min of 4096 mb and 1/8th of the total space
+# of the drive where cdc_raw_directory resides.
+# cdc_total_space_in_mb: 4096
+
+# When we hit our cdc_raw limit and the CDCCompactor is either running behind
+# or experiencing backpressure, we check at the following interval to see if any
+# new space for cdc-tracked tables has been made available. Default to 250ms
+# cdc_free_space_check_interval_ms: 250
+
+# A fixed memory pool size in MB for for SSTable index summaries. If left
+# empty, this will default to 5% of the heap size. If the memory usage of
+# all index summaries exceeds this limit, SSTables with low read rates will
+# shrink their index summaries in order to meet this limit.  However, this
+# is a best-effort process. In extreme conditions Cassandra may need to use
+# more than this amount of memory.
+index_summary_capacity_in_mb:
+
+# How frequently index summaries should be resampled.  This is done
+# periodically to redistribute memory from the fixed-size pool to sstables
+# proportional their recent read rates.  Setting to -1 will disable this
+# process, leaving existing index summaries at their current sampling level.
+index_summary_resize_interval_in_minutes: 60
+
+# Whether to, when doing sequential writing, fsync() at intervals in
+# order to force the operating system to flush the dirty
+# buffers. Enable this to avoid sudden dirty buffer flushing from
+# impacting read latencies. Almost always a good idea on SSDs; not
+# necessarily on platters.
+trickle_fsync: false
+trickle_fsync_interval_in_kb: 10240
+
+# TCP port, for commands and data
+# For security reasons, you should not expose this port to the internet.  Firewall it if needed.
+storage_port: 7000
+
+# SSL port, for encrypted communication.  Unused unless enabled in
+# encryption_options
+# For security reasons, you should not expose this port to the internet.  Firewall it if needed.
+ssl_storage_port: 7001
+
+# Address or interface to bind to and tell other Cassandra nodes to connect to.
+# You _must_ change this if you want multiple nodes to be able to communicate!
+#
+# Set listen_address OR listen_interface, not both.
+#
+# Leaving it blank leaves it up to InetAddress.getLocalHost(). This
+# will always do the Right Thing _if_ the node is properly configured
+# (hostname, name resolution, etc), and the Right Thing is to use the
+# address associated with the hostname (it might not be).
+#
+# Setting listen_address to 0.0.0.0 is always wrong.
+#
+{% if database.bind.interface is defined %}
+listen_interface: {{ database.bind.interface }}
+{% else %}
+listen_address: {{ database.bind.host }}
+{% endif %}
+
+# Set listen_address OR listen_interface, not both. Interfaces must correspond
+# to a single address, IP aliasing is not supported.
+# listen_interface: eth0
+
+# If you choose to specify the interface by name and the interface has an ipv4 and an ipv6 address
+# you can specify which should be chosen using listen_interface_prefer_ipv6. If false the first ipv4
+# address will be used. If true the first ipv6 address will be used. Defaults to false preferring
+# ipv4. If there is only one address it will be selected regardless of ipv4/ipv6.
+# listen_interface_prefer_ipv6: false
+
+# Address to broadcast to other Cassandra nodes
+# Leaving this blank will set it to the same value as listen_address
+# broadcast_address: 1.2.3.4
+
+# When using multiple physical network interfaces, set this
+# to true to listen on broadcast_address in addition to
+# the listen_address, allowing nodes to communicate in both
+# interfaces.
+# Ignore this property if the network configuration automatically
+# routes  between the public and private networks such as EC2.
+# listen_on_broadcast_address: false
+
+# Internode authentication backend, implementing IInternodeAuthenticator;
+# used to allow/disallow connections from peer nodes.
+# internode_authenticator: org.apache.cassandra.auth.AllowAllInternodeAuthenticator
+
+# Whether to start the native transport server.
+# Please note that the address on which the native transport is bound is the
+# same as the rpc_address. The port however is different and specified below.
+start_native_transport: true
+# port for the CQL native transport to listen for clients on
+# For security reasons, you should not expose this port to the internet.  Firewall it if needed.
+native_transport_port: {{ database.bind.get('port', 9042) }}
+# Enabling native transport encryption in client_encryption_options allows you to either use
+# encryption for the standard port or to use a dedicated, additional port along with the unencrypted
+# standard native_transport_port.
+# Enabling client encryption and keeping native_transport_port_ssl disabled will use encryption
+# for native_transport_port. Setting native_transport_port_ssl to a different value
+# from native_transport_port will use encryption for native_transport_port_ssl while
+# keeping native_transport_port unencrypted.
+# native_transport_port_ssl: 9142
+# The maximum threads for handling requests when the native transport is used.
+# This is similar to rpc_max_threads though the default differs slightly (and
+# there is no native_transport_min_threads, idle threads will always be stopped
+# after 30 seconds).
+# native_transport_max_threads: 128
+#
+# The maximum size of allowed frame. Frame (requests) larger than this will
+# be rejected as invalid. The default is 256MB. If you're changing this parameter,
+# you may want to adjust max_value_size_in_mb accordingly.
+# native_transport_max_frame_size_in_mb: 256
+
+# The maximum number of concurrent client connections.
+# The default is -1, which means unlimited.
+# native_transport_max_concurrent_connections: -1
+
+# The maximum number of concurrent client connections per source ip.
+# The default is -1, which means unlimited.
+# native_transport_max_concurrent_connections_per_ip: -1
+
+# Whether to start the thrift rpc server.
+start_rpc: true
+
+# The address or interface to bind the Thrift RPC service and native transport
+# server to.
+#
+# Set rpc_address OR rpc_interface, not both.
+#
+# Leaving rpc_address blank has the same effect as on listen_address
+# (i.e. it will be based on the configured hostname of the node).
+#
+# Note that unlike listen_address, you can specify 0.0.0.0, but you must also
+# set broadcast_rpc_address to a value other than 0.0.0.0.
+#
+# For security reasons, you should not expose this port to the internet.  Firewall it if needed.
+{% if database.bind.interface is defined %}
+rpc_interface: {{ database.bind.interface }}
+{% else %}
+rpc_address: {{ database.bind.host }}
+{% endif %}
+
+# Set rpc_address OR rpc_interface, not both. Interfaces must correspond
+# to a single address, IP aliasing is not supported.
+# rpc_interface: eth1
+
+# If you choose to specify the interface by name and the interface has an ipv4 and an ipv6 address
+# you can specify which should be chosen using rpc_interface_prefer_ipv6. If false the first ipv4
+# address will be used. If true the first ipv6 address will be used. Defaults to false preferring
+# ipv4. If there is only one address it will be selected regardless of ipv4/ipv6.
+# rpc_interface_prefer_ipv6: false
+
+# port for Thrift to listen for clients on
+rpc_port: {{ database.bind.get('rpc_port', 9160) }}
+
+# RPC address to broadcast to drivers and other Cassandra nodes. This cannot
+# be set to 0.0.0.0. If left blank, this will be set to the value of
+# rpc_address. If rpc_address is set to 0.0.0.0, broadcast_rpc_address must
+# be set.
+# broadcast_rpc_address: 1.2.3.4
+
+# enable or disable keepalive on rpc/native connections
+rpc_keepalive: true
+
+# Cassandra provides two out-of-the-box options for the RPC Server:
+#
+# sync
+#   One thread per thrift connection. For a very large number of clients, memory
+#   will be your limiting factor. On a 64 bit JVM, 180KB is the minimum stack size
+#   per thread, and that will correspond to your use of virtual memory (but physical memory
+#   may be limited depending on use of stack space).
+#
+# hsha
+#   Stands for "half synchronous, half asynchronous." All thrift clients are handled
+#   asynchronously using a small number of threads that does not vary with the amount
+#   of thrift clients (and thus scales well to many clients). The rpc requests are still
+#   synchronous (one thread per active request). If hsha is selected then it is essential
+#   that rpc_max_threads is changed from the default value of unlimited.
+#
+# The default is sync because on Windows hsha is about 30% slower.  On Linux,
+# sync/hsha performance is about the same, with hsha of course using less memory.
+#
+# Alternatively,  can provide your own RPC server by providing the fully-qualified class name
+# of an o.a.c.t.TServerFactory that can create an instance of it.
+rpc_server_type: sync
+
+# Uncomment rpc_min|max_thread to set request pool size limits.
+#
+# Regardless of your choice of RPC server (see above), the number of maximum requests in the
+# RPC thread pool dictates how many concurrent requests are possible (but if you are using the sync
+# RPC server, it also dictates the number of clients that can be connected at all).
+#
+# The default is unlimited and thus provides no protection against clients overwhelming the server. You are
+# encouraged to set a maximum that makes sense for you in production, but do keep in mind that
+# rpc_max_threads represents the maximum number of client requests this server may execute concurrently.
+#
+# rpc_min_threads: 16
+# rpc_max_threads: 2048
+
+# uncomment to set socket buffer sizes on rpc connections
+# rpc_send_buff_size_in_bytes:
+# rpc_recv_buff_size_in_bytes:
+
+# Uncomment to set socket buffer size for internode communication
+# Note that when setting this, the buffer size is limited by net.core.wmem_max
+# and when not setting it it is defined by net.ipv4.tcp_wmem
+# See also:
+# /proc/sys/net/core/wmem_max
+# /proc/sys/net/core/rmem_max
+# /proc/sys/net/ipv4/tcp_wmem
+# /proc/sys/net/ipv4/tcp_wmem
+# and 'man tcp'
+# internode_send_buff_size_in_bytes:
+
+# Uncomment to set socket buffer size for internode communication
+# Note that when setting this, the buffer size is limited by net.core.wmem_max
+# and when not setting it it is defined by net.ipv4.tcp_wmem
+# internode_recv_buff_size_in_bytes:
+
+# Frame size for thrift (maximum message length).
+thrift_framed_transport_size_in_mb: 15
+
+# Set to true to have Cassandra create a hard link to each sstable
+# flushed or streamed locally in a backups/ subdirectory of the
+# keyspace data.  Removing these links is the operator's
+# responsibility.
+incremental_backups: false
+
+# Whether or not to take a snapshot before each compaction.  Be
+# careful using this option, since Cassandra won't clean up the
+# snapshots for you.  Mostly useful if you're paranoid when there
+# is a data format change.
+snapshot_before_compaction: false
+
+# Whether or not a snapshot is taken of the data before keyspace truncation
+# or dropping of column families. The STRONGLY advised default of true 
+# should be used to provide data safety. If you set this flag to false, you will
+# lose data on truncation or drop.
+auto_snapshot: true
+
+# Granularity of the collation index of rows within a partition.
+# Increase if your rows are large, or if you have a very large
+# number of rows per partition.  The competing goals are these:
+#
+# - a smaller granularity means more index entries are generated
+#   and looking up rows withing the partition by collation column
+#   is faster
+# - but, Cassandra will keep the collation index in memory for hot
+#   rows (as part of the key cache), so a larger granularity means
+#   you can cache more hot rows
+column_index_size_in_kb: 64
+
+# Per sstable indexed key cache entries (the collation index in memory
+# mentioned above) exceeding this size will not be held on heap.
+# This means that only partition information is held on heap and the
+# index entries are read from disk.
+#
+# Note that this size refers to the size of the
+# serialized index information and not the size of the partition.
+column_index_cache_size_in_kb: 2
+
+# Number of simultaneous compactions to allow, NOT including
+# validation "compactions" for anti-entropy repair.  Simultaneous
+# compactions can help preserve read performance in a mixed read/write
+# workload, by mitigating the tendency of small sstables to accumulate
+# during a single long running compactions. The default is usually
+# fine and if you experience problems with compaction running too
+# slowly or too fast, you should look at
+# compaction_throughput_mb_per_sec first.
+#
+# concurrent_compactors defaults to the smaller of (number of disks,
+# number of cores), with a minimum of 2 and a maximum of 8.
+# 
+# If your data directories are backed by SSD, you should increase this
+# to the number of cores.
+#concurrent_compactors: 1
+{% if database.concurrent_compactors is defined %}
+concurrent_compactors: {{ database.concurrent_compactors }}
+{% endif %}
+
+# Throttles compaction to the given total throughput across the entire
+# system. The faster you insert data, the faster you need to compact in
+# order to keep the sstable count down, but in general, setting this to
+# 16 to 32 times the rate you are inserting data is more than sufficient.
+# Setting this to 0 disables throttling. Note that this account for all types
+# of compaction, including validation compaction.
+compaction_throughput_mb_per_sec: {{ database.compaction_throughput_mb_per_sec }}
+
+# When compacting, the replacement sstable(s) can be opened before they
+# are completely written, and used in place of the prior sstables for
+# any range that has been written. This helps to smoothly transfer reads 
+# between the sstables, reducing page cache churn and keeping hot rows hot
+sstable_preemptive_open_interval_in_mb: 50
+
+# Throttles all outbound streaming file transfers on this node to the
+# given total throughput in Mbps. This is necessary because Cassandra does
+# mostly sequential IO when streaming data during bootstrap or repair, which
+# can lead to saturating the network connection and degrading rpc performance.
+# When unset, the default is 200 Mbps or 25 MB/s.
+# stream_throughput_outbound_megabits_per_sec: 200
+
+# Throttles all streaming file transfer between the datacenters,
+# this setting allows users to throttle inter dc stream throughput in addition
+# to throttling all network stream traffic as configured with
+# stream_throughput_outbound_megabits_per_sec
+# When unset, the default is 200 Mbps or 25 MB/s
+# inter_dc_stream_throughput_outbound_megabits_per_sec: 200
+
+# How long the coordinator should wait for read operations to complete
+read_request_timeout_in_ms: 10000
+# How long the coordinator should wait for seq or index scans to complete
+range_request_timeout_in_ms: 10000
+# How long the coordinator should wait for writes to complete
+write_request_timeout_in_ms: 10000
+# How long the coordinator should wait for counter writes to complete
+counter_write_request_timeout_in_ms: 5000
+# How long a coordinator should continue to retry a CAS operation
+# that contends with other proposals for the same row
+cas_contention_timeout_in_ms: 1000
+# How long the coordinator should wait for truncates to complete
+# (This can be much longer, because unless auto_snapshot is disabled
+# we need to flush first so we can snapshot before removing the data.)
+truncate_request_timeout_in_ms: 60000
+# The default timeout for other, miscellaneous operations
+request_timeout_in_ms: 10000
+
+# How long before a node logs slow queries. Select queries that take longer than
+# this timeout to execute, will generate an aggregated log message, so that slow queries
+# can be identified. Set this value to zero to disable slow query logging.
+slow_query_log_timeout_in_ms: 500
+
+# Enable operation timeout information exchange between nodes to accurately
+# measure request timeouts.  If disabled, replicas will assume that requests
+# were forwarded to them instantly by the coordinator, which means that
+# under overload conditions we will waste that much extra time processing 
+# already-timed-out requests.
+#
+# Warning: before enabling this property make sure to ntp is installed
+# and the times are synchronized between the nodes.
+cross_node_timeout: false
+
+# Set keep-alive period for streaming
+# This node will send a keep-alive message periodically with this period.
+# If the node does not receive a keep-alive message from the peer for
+# 2 keep-alive cycles the stream session times out and fail
+# Default value is 300s (5 minutes), which means stalled stream
+# times out in 10 minutes by default
+# streaming_keep_alive_period_in_secs: 300
+
+# phi value that must be reached for a host to be marked down.
+# most users should never need to adjust this.
+# phi_convict_threshold: 8
+
+# endpoint_snitch -- Set this to a class that implements
+# IEndpointSnitch.  The snitch has two functions:
+#
+# - it teaches Cassandra enough about your network topology to route
+#   requests efficiently
+# - it allows Cassandra to spread replicas around your cluster to avoid
+#   correlated failures. It does this by grouping machines into
+#   "datacenters" and "racks."  Cassandra will do its best not to have
+#   more than one replica on the same "rack" (which may not actually
+#   be a physical location)
+#
+# CASSANDRA WILL NOT ALLOW YOU TO SWITCH TO AN INCOMPATIBLE SNITCH
+# ONCE DATA IS INSERTED INTO THE CLUSTER.  This would cause data loss.
+# This means that if you start with the default SimpleSnitch, which
+# locates every node on "rack1" in "datacenter1", your only options
+# if you need to add another datacenter are GossipingPropertyFileSnitch
+# (and the older PFS).  From there, if you want to migrate to an
+# incompatible snitch like Ec2Snitch you can do it by adding new nodes
+# under Ec2Snitch (which will locate them in a new "datacenter") and
+# decommissioning the old ones.
+#
+# Out of the box, Cassandra provides:
+#
+# SimpleSnitch:
+#    Treats Strategy order as proximity. This can improve cache
+#    locality when disabling read repair.  Only appropriate for
+#    single-datacenter deployments.
+#
+# GossipingPropertyFileSnitch
+#    This should be your go-to snitch for production use.  The rack
+#    and datacenter for the local node are defined in
+#    cassandra-rackdc.properties and propagated to other nodes via
+#    gossip.  If cassandra-topology.properties exists, it is used as a
+#    fallback, allowing migration from the PropertyFileSnitch.
+#
+# PropertyFileSnitch:
+#    Proximity is determined by rack and data center, which are
+#    explicitly configured in cassandra-topology.properties.
+#
+# Ec2Snitch:
+#    Appropriate for EC2 deployments in a single Region. Loads Region
+#    and Availability Zone information from the EC2 API. The Region is
+#    treated as the datacenter, and the Availability Zone as the rack.
+#    Only private IPs are used, so this will not work across multiple
+#    Regions.
+#
+# Ec2MultiRegionSnitch:
+#    Uses public IPs as broadcast_address to allow cross-region
+#    connectivity.  (Thus, you should set seed addresses to the public
+#    IP as well.) You will need to open the storage_port or
+#    ssl_storage_port on the public IP firewall.  (For intra-Region
+#    traffic, Cassandra will switch to the private IP after
+#    establishing a connection.)
+#
+# RackInferringSnitch:
+#    Proximity is determined by rack and data center, which are
+#    assumed to correspond to the 3rd and 2nd octet of each node's IP
+#    address, respectively.  Unless this happens to match your
+#    deployment conventions, this is best used as an example of
+#    writing a custom Snitch class and is provided in that spirit.
+#
+# You can use a custom Snitch by setting this to the full class name
+# of the snitch, which will be assumed to be on your classpath.
+endpoint_snitch: SimpleSnitch
+
+# controls how often to perform the more expensive part of host score
+# calculation
+dynamic_snitch_update_interval_in_ms: 100 
+# controls how often to reset all host scores, allowing a bad host to
+# possibly recover
+dynamic_snitch_reset_interval_in_ms: 600000
+# if set greater than zero and read_repair_chance is < 1.0, this will allow
+# 'pinning' of replicas to hosts in order to increase cache capacity.
+# The badness threshold will control how much worse the pinned host has to be
+# before the dynamic snitch will prefer other replicas over it.  This is
+# expressed as a double which represents a percentage.  Thus, a value of
+# 0.2 means Cassandra would continue to prefer the static snitch values
+# until the pinned host was 20% worse than the fastest.
+dynamic_snitch_badness_threshold: 0.1
+
+# request_scheduler -- Set this to a class that implements
+# RequestScheduler, which will schedule incoming client requests
+# according to the specific policy. This is useful for multi-tenancy
+# with a single Cassandra cluster.
+# NOTE: This is specifically for requests from the client and does
+# not affect inter node communication.
+# org.apache.cassandra.scheduler.NoScheduler - No scheduling takes place
+# org.apache.cassandra.scheduler.RoundRobinScheduler - Round robin of
+# client requests to a node with a separate queue for each
+# request_scheduler_id. The scheduler is further customized by
+# request_scheduler_options as described below.
+request_scheduler: org.apache.cassandra.scheduler.NoScheduler
+
+# Scheduler Options vary based on the type of scheduler
+#
+# NoScheduler
+#   Has no options
+#
+# RoundRobin
+#   throttle_limit
+#     The throttle_limit is the number of in-flight
+#     requests per client.  Requests beyond 
+#     that limit are queued up until
+#     running requests can complete.
+#     The value of 80 here is twice the number of
+#     concurrent_reads + concurrent_writes.
+#   default_weight
+#     default_weight is optional and allows for
+#     overriding the default which is 1.
+#   weights
+#     Weights are optional and will default to 1 or the
+#     overridden default_weight. The weight translates into how
+#     many requests are handled during each turn of the
+#     RoundRobin, based on the scheduler id.
+#
+# request_scheduler_options:
+#    throttle_limit: 80
+#    default_weight: 5
+#    weights:
+#      Keyspace1: 1
+#      Keyspace2: 5
+
+# request_scheduler_id -- An identifier based on which to perform
+# the request scheduling. Currently the only valid option is keyspace.
+# request_scheduler_id: keyspace
+
+# Enable or disable inter-node encryption
+# JVM defaults for supported SSL socket protocols and cipher suites can
+# be replaced using custom encryption options. This is not recommended
+# unless you have policies in place that dictate certain settings, or
+# need to disable vulnerable ciphers or protocols in case the JVM cannot
+# be updated.
+# FIPS compliant settings can be configured at JVM level and should not
+# involve changing encryption settings here:
+# https://docs.oracle.com/javase/8/docs/technotes/guides/security/jsse/FIPS.html
+# *NOTE* No custom encryption options are enabled at the moment
+# The available internode options are : all, none, dc, rack
+#
+# If set to dc cassandra will encrypt the traffic between the DCs
+# If set to rack cassandra will encrypt the traffic between the racks
+#
+# The passwords used in these options must match the passwords used when generating
+# the keystore and truststore.  For instructions on generating these files, see:
+# http://download.oracle.com/javase/6/docs/technotes/guides/security/jsse/JSSERefGuide.html#CreateKeystore
+#
+server_encryption_options:
+    internode_encryption: none
+    keystore: conf/.keystore
+    keystore_password: cassandra
+    truststore: conf/.truststore
+    truststore_password: cassandra
+    # More advanced defaults below:
+    # protocol: TLS
+    # algorithm: SunX509
+    # store_type: JKS
+    # cipher_suites: [TLS_RSA_WITH_AES_128_CBC_SHA,TLS_RSA_WITH_AES_256_CBC_SHA,TLS_DHE_RSA_WITH_AES_128_CBC_SHA,TLS_DHE_RSA_WITH_AES_256_CBC_SHA,TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA,TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA]
+    # require_client_auth: false
+    # require_endpoint_verification: false
+
+# enable or disable client/server encryption.
+client_encryption_options:
+    enabled: false
+    # If enabled and optional is set to true encrypted and unencrypted connections are handled.
+    optional: false
+    keystore: conf/.keystore
+    keystore_password: cassandra
+    # require_client_auth: false
+    # Set trustore and truststore_password if require_client_auth is true
+    # truststore: conf/.truststore
+    # truststore_password: cassandra
+    # More advanced defaults below:
+    # protocol: TLS
+    # algorithm: SunX509
+    # store_type: JKS
+    # cipher_suites: [TLS_RSA_WITH_AES_128_CBC_SHA,TLS_RSA_WITH_AES_256_CBC_SHA,TLS_DHE_RSA_WITH_AES_128_CBC_SHA,TLS_DHE_RSA_WITH_AES_256_CBC_SHA,TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA,TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA]
+
+# internode_compression controls whether traffic between nodes is
+# compressed.
+# Can be:
+#
+# all
+#   all traffic is compressed
+#
+# dc
+#   traffic between different datacenters is compressed
+#
+# none
+#   nothing is compressed.
+internode_compression: all
+
+# Enable or disable tcp_nodelay for inter-dc communication.
+# Disabling it will result in larger (but fewer) network packets being sent,
+# reducing overhead from the TCP protocol itself, at the cost of increasing
+# latency if you block for cross-datacenter responses.
+inter_dc_tcp_nodelay: true
+
+# TTL for different trace types used during logging of the repair process.
+tracetype_query_ttl: 86400
+tracetype_repair_ttl: 604800
+
+# By default, Cassandra logs GC Pauses greater than 200 ms at INFO level
+# This threshold can be adjusted to minimize logging if necessary
+# gc_log_threshold_in_ms: 200
+
+# If unset, all GC Pauses greater than gc_log_threshold_in_ms will log at
+# INFO level
+# UDFs (user defined functions) are disabled by default.
+# As of Cassandra 3.0 there is a sandbox in place that should prevent execution of evil code.
+enable_user_defined_functions: false
+
+# Enables scripted UDFs (JavaScript UDFs).
+# Java UDFs are always enabled, if enable_user_defined_functions is true.
+# Enable this option to be able to use UDFs with "language javascript" or any custom JSR-223 provider.
+# This option has no effect, if enable_user_defined_functions is false.
+enable_scripted_user_defined_functions: false
+
+# The default Windows kernel timer and scheduling resolution is 15.6ms for power conservation.
+# Lowering this value on Windows can provide much tighter latency and better throughput, however
+# some virtualized environments may see a negative performance impact from changing this setting
+# below their system default. The sysinternals 'clockres' tool can confirm your system's default
+# setting.
+windows_timer_interval: 1
+
+
+# Enables encrypting data at-rest (on disk). Different key providers can be plugged in, but the default reads from
+# a JCE-style keystore. A single keystore can hold multiple keys, but the one referenced by
+# the "key_alias" is the only key that will be used for encrypt opertaions; previously used keys
+# can still (and should!) be in the keystore and will be used on decrypt operations
+# (to handle the case of key rotation).
+#
+# It is strongly recommended to download and install Java Cryptography Extension (JCE)
+# Unlimited Strength Jurisdiction Policy Files for your version of the JDK.
+# (current link: http://www.oracle.com/technetwork/java/javase/downloads/jce8-download-2133166.html)
+#
+# Currently, only the following file types are supported for transparent data encryption, although
+# more are coming in future cassandra releases: commitlog, hints
+transparent_data_encryption_options:
+    enabled: false
+    chunk_length_kb: 64
+    cipher: AES/CBC/PKCS5Padding
+    key_alias: testing:1
+    # CBC IV length for AES needs to be 16 bytes (which is also the default size)
+    # iv_length: 16
+    key_provider: 
+      - class_name: org.apache.cassandra.security.JKSKeyProvider
+        parameters: 
+          - keystore: conf/.keystore
+            keystore_password: cassandra
+            store_type: JCEKS
+            key_password: cassandra
+
+
+#####################
+# SAFETY THRESHOLDS #
+#####################
+
+# When executing a scan, within or across a partition, we need to keep the
+# tombstones seen in memory so we can return them to the coordinator, which
+# will use them to make sure other replicas also know about the deleted rows.
+# With workloads that generate a lot of tombstones, this can cause performance
+# problems and even exaust the server heap.
+# (http://www.datastax.com/dev/blog/cassandra-anti-patterns-queues-and-queue-like-datasets)
+# Adjust the thresholds here if you understand the dangers and want to
+# scan more tombstones anyway.  These thresholds may also be adjusted at runtime
+# using the StorageService mbean.
+tombstone_warn_threshold: 1000
+tombstone_failure_threshold: 100000
+
+# Log WARN on any multiple-partition batch size exceeding this value. 5kb per batch by default.
+# Caution should be taken on increasing the size of this threshold as it can lead to node instability.
+batch_size_warn_threshold_in_kb: 5
+
+# Fail any multiple-partition batch exceeding this value. 50kb (10x warn threshold) by default.
+batch_size_fail_threshold_in_kb: 50
+
+# Log WARN on any batches not of type LOGGED than span across more partitions than this limit
+unlogged_batch_across_partitions_warn_threshold: 10
+
+# Log a warning when compacting partitions larger than this value
+compaction_large_partition_warning_threshold_mb: 100
+
+# GC Pauses greater than gc_warn_threshold_in_ms will be logged at WARN level
+# Adjust the threshold based on your application throughput requirement
+# By default, Cassandra logs GC Pauses greater than 200 ms at INFO level
+gc_warn_threshold_in_ms: 1000
+
+# Maximum size of any value in SSTables. Safety measure to detect SSTable corruption
+# early. Any value size larger than this threshold will result into marking an SSTable
+# as corrupted.
+# max_value_size_in_mb: 256
+
+# Back-pressure settings #
+# If enabled, the coordinator will apply the back-pressure strategy specified below to each mutation
+# sent to replicas, with the aim of reducing pressure on overloaded replicas.
+back_pressure_enabled: false
+# The back-pressure strategy applied.
+# The default implementation, RateBasedBackPressure, takes three arguments:
+# high ratio, factor, and flow type, and uses the ratio between incoming mutation responses and outgoing mutation requests.
+# If below high ratio, outgoing mutations are rate limited according to the incoming rate decreased by the given factor;
+# if above high ratio, the rate limiting is increased by the given factor;
+# such factor is usually best configured between 1 and 10, use larger values for a faster recovery
+# at the expense of potentially more dropped mutations;
+# the rate limiting is applied according to the flow type: if FAST, it's rate limited at the speed of the fastest replica,
+# if SLOW at the speed of the slowest one.
+# New strategies can be added. Implementors need to implement org.apache.cassandra.net.BackpressureStrategy and
+# provide a public constructor accepting a Map<String, Object>.
+back_pressure_strategy:
+    - class_name: org.apache.cassandra.net.RateBasedBackPressure
+      parameters:
+        - high_ratio: 0.90
+          factor: 5
+          flow: FAST
diff --git a/opencontrail/files/3.0/server.properties b/opencontrail/files/kafka/0.8.2.0/server.properties
similarity index 100%
rename from opencontrail/files/3.0/server.properties
rename to opencontrail/files/kafka/0.8.2.0/server.properties
diff --git a/opencontrail/files/4.0/consumer.properties b/opencontrail/files/kafka/0.9.0.1/consumer.properties
similarity index 100%
rename from opencontrail/files/4.0/consumer.properties
rename to opencontrail/files/kafka/0.9.0.1/consumer.properties
diff --git a/opencontrail/files/4.0/server.properties b/opencontrail/files/kafka/0.9.0.1/server.properties
similarity index 100%
rename from opencontrail/files/4.0/server.properties
rename to opencontrail/files/kafka/0.9.0.1/server.properties
diff --git a/opencontrail/files/4.0/zookeeper.properties b/opencontrail/files/kafka/0.9.0.1/zookeeper.properties
similarity index 100%
copy from opencontrail/files/4.0/zookeeper.properties
copy to opencontrail/files/kafka/0.9.0.1/zookeeper.properties
diff --git a/opencontrail/files/kafka/1.1.1/consumer.properties b/opencontrail/files/kafka/1.1.1/consumer.properties
new file mode 100644
index 0000000..41f48df
--- /dev/null
+++ b/opencontrail/files/kafka/1.1.1/consumer.properties
@@ -0,0 +1,27 @@
+{%- from "opencontrail/map.jinja" import database with context %}
+# Licensed to the Apache Software Foundation (ASF) under one or more
+# contributor license agreements.  See the NOTICE file distributed with
+# this work for additional information regarding copyright ownership.
+# The ASF licenses this file to You under the Apache License, Version 2.0
+# (the "License"); you may not use this file except in compliance with
+# the License.  You may obtain a copy of the License at
+#
+#    http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# see org.apache.kafka.clients.consumer.ConsumerConfig for more details
+
+# list of brokers used for bootstrapping knowledge about the rest of the cluster
+# format: host1:port1,host2:port2 ...
+bootstrap.servers={% for member in database.members %}{{ member.host }}:2182{% if not loop.last %},{% endif %}{% endfor %}
+
+# consumer group id
+group.id=test-consumer-group
+
+# What to do when there is no initial offset in Kafka or if the current
+# offset does not exist any more on the server: latest, earliest, none
+#auto.offset.reset=
diff --git a/opencontrail/files/kafka/1.1.1/server.properties b/opencontrail/files/kafka/1.1.1/server.properties
new file mode 100644
index 0000000..1fb905c
--- /dev/null
+++ b/opencontrail/files/kafka/1.1.1/server.properties
@@ -0,0 +1,176 @@
+{%- from "opencontrail/map.jinja" import database with context %}
+# Licensed to the Apache Software Foundation (ASF) under one or more
+# contributor license agreements.  See the NOTICE file distributed with
+# this work for additional information regarding copyright ownership.
+# The ASF licenses this file to You under the Apache License, Version 2.0
+# (the "License"); you may not use this file except in compliance with
+# the License.  You may obtain a copy of the License at
+#
+#    http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# see kafka.server.KafkaConfig for additional details and defaults
+
+############################# Server Basics #############################
+
+# The id of the broker. This must be set to a unique integer for each broker.
+broker.id={{ database.id }}
+
+delete.topic.enable=true
+default.replication.factor={% if database.members|length>1 %}2{% else %}1{% endif %}
+
+############################# Socket Server Settings #############################
+
+# The address the socket server listens on. It will get the value returned from
+# java.net.InetAddress.getCanonicalHostName() if not configured.
+#   FORMAT:
+#     listeners = listener_name://host_name:port
+#   EXAMPLE:
+#     listeners = PLAINTEXT://your.host.name:9092
+listeners=PLAINTEXT://{{ database.bind.host }}:9092
+
+# Hostname and port the broker will advertise to producers and consumers. If not set,
+# it uses the value for "listeners" if configured.  Otherwise, it will use the value
+# returned from java.net.InetAddress.getCanonicalHostName().
+#advertised.listeners=PLAINTEXT://your.host.name:9092
+
+# Maps listener names to security protocols, the default is for them to be the same. See the config documentation for more details
+#listener.security.protocol.map=PLAINTEXT:PLAINTEXT,SSL:SSL,SASL_PLAINTEXT:SASL_PLAINTEXT,SASL_SSL:SASL_SSL
+
+# The number of threads that the server uses for receiving requests from the network and sending responses to the network
+num.network.threads=3
+
+# The number of threads that the server uses for processing requests, which may include disk I/O
+num.io.threads=8
+
+# The send buffer (SO_SNDBUF) used by the socket server
+socket.send.buffer.bytes=102400
+
+# The receive buffer (SO_RCVBUF) used by the socket server
+socket.receive.buffer.bytes=102400
+
+# The maximum size of a request that the socket server will accept (protection against OOM)
+socket.request.max.bytes=104857600
+
+
+############################# Log Basics #############################
+
+# A comma separated list of directories under which to store log files
+log.dirs=/var/lib/kafka
+
+# The default number of log partitions per topic. More partitions allow greater
+# parallelism for consumption, but this will also result in more files across
+# the brokers.
+num.partitions=30
+
+# The number of threads per data directory to be used for log recovery at startup and flushing at shutdown.
+# This value is recommended to be increased for installations with data dirs located in RAID array.
+num.recovery.threads.per.data.dir=1
+
+############################# Internal Topic Settings  #############################
+# The replication factor for the group metadata internal topics "__consumer_offsets" and "__transaction_state"
+# For anything other than development testing, a value greater than 1 is recommended for to ensure availability such as 3.
+offsets.topic.replication.factor={% if database.members|length>1 %}2{% else %}1{% endif %}
+transaction.state.log.replication.factor={% if database.members|length>1 %}2{% else %}1{% endif %}
+transaction.state.log.min.isr={% if database.members|length>1 %}2{% else %}1{% endif %}
+
+############################# Log Flush Policy #############################
+
+# Messages are immediately written to the filesystem but by default we only fsync() to sync
+# the OS cache lazily. The following configurations control the flush of data to disk.
+# There are a few important trade-offs here:
+#    1. Durability: Unflushed data may be lost if you are not using replication.
+#    2. Latency: Very large flush intervals may lead to latency spikes when the flush does occur as there will be a lot of data to flush.
+#    3. Throughput: The flush is generally the most expensive operation, and a small flush interval may lead to excessive seeks.
+# The settings below allow one to configure the flush policy to flush data after a period of time or
+# every N messages (or both). This can be done globally and overridden on a per-topic basis.
+
+# The number of messages to accept before forcing a flush of data to disk
+#log.flush.interval.messages=10000
+
+# The maximum amount of time a message can sit in a log before we force a flush
+#log.flush.interval.ms=1000
+
+############################# Log Retention Policy #############################
+
+# The following configurations control the disposal of log segments. The policy can
+# be set to delete segments after a period of time, or after a given size has accumulated.
+# A segment will be deleted whenever *either* of these criteria are met. Deletion always happens
+# from the end of the log.
+
+# The minimum age of a log file to be eligible for deletion due to age
+log.retention.hours=24
+
+# A size-based retention policy for logs. Segments are pruned from the log unless the remaining
+# segments drop below log.retention.bytes. Functions independently of log.retention.hours.
+log.retention.bytes=268435456
+
+# The maximum size of a log segment file. When this size is reached a new log segment will be created.
+log.segment.bytes=268435456
+
+# The interval at which log segments are checked to see if they can be deleted according
+# to the retention policies
+log.retention.check.interval.ms=300000
+
+log.cleanup.policy=delete
+log.cleaner.threads=2
+log.cleaner.dedupe.buffer.size=250000000
+
+############################# Zookeeper #############################
+
+# Zookeeper connection string (see zookeeper docs for details).
+# This is a comma separated host:port pairs, each corresponding to a zk
+# server. e.g. "127.0.0.1:3000,127.0.0.1:3001,127.0.0.1:3002".
+# You can also append an optional chroot string to the urls to specify the
+# root directory for all kafka znodes.
+zookeeper.connect={% for member in database.members %}{{ member.host }}:2182{% if not loop.last %},{% endif %}{% endfor %}
+
+# Timeout in ms for connecting to zookeeper
+zookeeper.connection.timeout.ms=6000
+
+##################### Confluent Metrics Reporter #######################
+# Confluent Control Center and Confluent Auto Data Balancer integration
+#
+# Uncomment the following lines to publish monitoring data for
+# Confluent Control Center and Confluent Auto Data Balancer
+# If you are using a dedicated metrics cluster, also adjust the settings
+# to point to your metrics kakfa cluster.
+#metric.reporters=io.confluent.metrics.reporter.ConfluentMetricsReporter
+#confluent.metrics.reporter.bootstrap.servers=localhost:9092
+#
+# Uncomment the following line if the metrics cluster has a single broker
+#confluent.metrics.reporter.topic.replicas=1
+
+##################### Confluent Proactive Support ######################
+# If set to true, and confluent-support-metrics package is installed
+# then the feature to collect and report support metrics
+# ("Metrics") is enabled.  If set to false, the feature is disabled.
+#
+confluent.support.metrics.enable=false
+
+
+# The customer ID under which support metrics will be collected and
+# reported.
+#
+# When the customer ID is set to "anonymous" (the default), then only a
+# reduced set of metrics is being collected and reported.
+#
+# Confluent customers
+# -------------------
+# If you are a Confluent customer, then you should replace the default
+# value with your actual Confluent customer ID.  Doing so will ensure
+# that additional support metrics will be collected and reported.
+#
+confluent.support.customer.id=anonymous
+
+############################# Group Coordinator Settings #############################
+
+# The following configuration specifies the time, in milliseconds, that the GroupCoordinator will delay the initial consumer rebalance.
+# The rebalance will be further delayed by the value of group.initial.rebalance.delay.ms as new members join the group, up to a maximum of max.poll.interval.ms.
+# The default value for this is 3 seconds.
+group.initial.rebalance.delay.ms=3
\ No newline at end of file
diff --git a/opencontrail/files/4.0/zookeeper.properties b/opencontrail/files/kafka/1.1.1/zookeeper.properties
similarity index 100%
rename from opencontrail/files/4.0/zookeeper.properties
rename to opencontrail/files/kafka/1.1.1/zookeeper.properties
diff --git a/opencontrail/map.jinja b/opencontrail/map.jinja
index 7fa87e8..6a972f5 100644
--- a/opencontrail/map.jinja
+++ b/opencontrail/map.jinja
@@ -60,6 +60,14 @@
     {%- else %}
         ['contrail-vrouter-agent', 'contrail-vrouter-nodemgr']
     {%- endif %}
+    xmpp:
+      tls:
+        enabled: False
+        auth:
+          enabled: False
+        cert_file: /etc/contrail/ssl/certs/server.pem
+        key_file: /etc/contrail/ssl/private/server-privkey.pem
+        ca_cert_file: /etc/contrail/ssl/certs/ca-cert.pem
     dpdk:
         enabled: False
   RedHat:
@@ -71,6 +79,14 @@
     {%- else %}
         ['contrail-vrouter-agent', 'contrail-vrouter-nodemgr']
     {%- endif %}
+    xmpp:
+      tls:
+        enabled: False
+        auth:
+          enabled: False
+        cert_file: /etc/contrail/ssl/certs/server.pem
+        key_file: /etc/contrail/ssl/private/server-privkey.pem
+        ca_cert_file: /etc/contrail/ssl/certs/ca-cert.pem
     dpdk:
         enabled: False
 config:
@@ -118,6 +134,14 @@
     container_name:
         {{ pillar.docker.client.compose.opencontrail.service.controller.container_name }}
     {%- endif%}
+    xmpp:
+      tls:
+        enabled: False
+        auth:
+          enabled: False
+        cert_file: /etc/contrail/ssl/certs/server.pem
+        key_file: /etc/contrail/ssl/private/server-privkey.pem
+        ca_cert_file: /etc/contrail/ssl/certs/ca-cert.pem
   RedHat:
     pkgs:
          ['contrail-openstack-control']
@@ -131,12 +155,30 @@
     container_name:
         {{ pillar.docker.client.compose.opencontrail.service.controller.container_name }}
     {%- endif%}
+    xmpp:
+      tls:
+        enabled: False
+        auth:
+          enabled: False
+        cert_file: /etc/contrail/ssl/certs/server.pem
+        key_file: /etc/contrail/ssl/private/server-privkey.pem
+        ca_cert_file: /etc/contrail/ssl/certs/ca-cert.pem
 database:
   Debian:
     pkgs:
     {%- set openjdkPackage = 'openjdk-8-jre-headless' if grains.get('oscodename') == 'xenial' else 'openjdk-7-jre-headless' %}
     {%- set databasePackage = 'contrail-openstack-database' if version >= 4.0 else 'contrail-database' %}
          ['cassandra', 'zookeeper', '{{ openjdkPackage }}' , '{{ databasePackage }}']
+    {%- if version >= 4.1 %}
+    cassandra_version: '3.10'
+    kafka_version: '1.1.1'
+    {%- elif version == 4.0 %}
+    cassandra_version: '2.2'
+    kafka_version: '0.9.0.1'
+    {%- else %}
+    cassandra_version: '2.1'
+    kafka_version: '0.8.2.0'
+    {%- endif%}
     cassandra_config: '/etc/cassandra/'
     compaction_throughput_mb_per_sec: 16
     services:
@@ -152,6 +194,16 @@
   RedHat:
     pkgs:
          ['contrail-openstack-database', 'zookeeper', 'supervisor', 'java-1.7.0-openjdk-headless']
+    {%- if version >= 4.1 %}
+    cassandra_version: '3.10'
+    kafka_version: '1.1.1'
+    {%- elif version == 4.0 %}
+    cassandra_version: '2.2'
+    kafka_version: '0.9.0.1'
+    {%- else %}
+    cassandra_version: '2.1'
+    kafka_version: '0.8.2.0'
+    {%- endif%}
     cassandra_config: '/etc/cassandra/conf/'
     compaction_throughput_mb_per_sec: 16
     services:
@@ -303,6 +355,16 @@
     pkgs:
     {%- set openjdkPackage = 'openjdk-8-jre-headless' if grains.get('oscodename') == 'xenial' else 'openjdk-7-jre-headless' %}
          ['cassandra', 'zookeeper', '{{ openjdkPackage }}', 'contrail-openstack-database']
+    {%- if version >= 4.1 %}
+    cassandra_version: '3.10'
+    kafka_version: '1.1.1'
+    {%- elif version == 4.0 %}
+    cassandra_version: '2.2'
+    kafka_version: '0.9.0.1'
+    {%- else %}
+    cassandra_version: '2.1'
+    kafka_version: '0.8.2.0'
+    {%- endif%}
     cassandra_config: '/etc/cassandra/'
     compaction_throughput_mb_per_sec: 16
     services:
@@ -314,6 +376,16 @@
   RedHat:
     pkgs:
          ['contrail-openstack-database', 'zookeeper', 'supervisor', 'java-1.7.0-openjdk-headless']
+    {%- if version >= 4.1 %}
+    cassandra_version: '3.10'
+    kafka_version: '1.1.1'
+    {%- elif version == 4.0 %}
+    cassandra_version: '2.2'
+    kafka_version: '0.9.0.1'
+    {%- else %}
+    cassandra_version: '2.1'
+    kafka_version: '0.8.2.0'
+    {%- endif%}
     cassandra_config: '/etc/cassandra/conf/'
     compaction_throughput_mb_per_sec: 16
     services:
diff --git a/opencontrail/meta/config.yml b/opencontrail/meta/config.yml
index 32cfea0..8c74d06 100644
--- a/opencontrail/meta/config.yml
+++ b/opencontrail/meta/config.yml
@@ -58,13 +58,13 @@
   {%- if pillar.opencontrail.database is defined %}
   {%- from "opencontrail/map.jinja" import database with context %}
   cassandra.yaml:
-    source: "salt://opencontrail/files/{{ database.version }}/cassandra.yaml"
+    source: "salt://opencontrail/files/cassandra/{{ database.cassandra_version }}/cassandra.yaml"
     template: jinja
   logback.xml:
     source: "salt://opencontrail/files/{{ database.version }}/database/logback.xml"
     template: jinja
   cassandra-env.sh:
-    source: "salt://opencontrail/files/{{ database.version }}/database/cassandra-env.sh"
+    source: "salt://opencontrail/files/cassandra/{{ database.cassandra_version }}/cassandra-env.sh"
     template: jinja
   contrail-database-nodemgr.conf:
     source: "salt://opencontrail/files/{{ database.version }}/contrail-database-nodemgr.conf"
@@ -76,7 +76,7 @@
     source: "salt://opencontrail/files/{{ database.version }}/zookeeper"
     template: jinja
   server.properties:
-    source: "salt://opencontrail/files/{{ database.version }}/server.properties"
+    source: "salt://opencontrail/files/kafka/{{ database.kafka_version }}/server.properties"
     template: jinja
   {%- endif %}
   {%- if pillar.opencontrail.collector is defined %}
diff --git a/tests/pillar/control3.sls b/tests/pillar/control3.sls
index 7492795..dff472e 100644
--- a/tests/pillar/control3.sls
+++ b/tests/pillar/control3.sls
@@ -88,6 +88,14 @@
       id: 2
     - host: 127.0.0.1
       id: 3
+    xmpp:
+      tls:
+        enabled: True
+        auth:
+          enabled: True
+        cert_file: /etc/contrail/server.pem
+        key_file: /etc/contrail/privkey.pem
+        ca_cert_file: /etc/contrail/ca-cert.pem
   database:
     version: 3.0
     cassandra:
diff --git a/tests/pillar/control40.sls b/tests/pillar/control40.sls
index 5351ef8..f98a28f 100644
--- a/tests/pillar/control40.sls
+++ b/tests/pillar/control40.sls
@@ -98,6 +98,14 @@
       id: 2
     - host: 127.0.0.1
       id: 3
+    xmpp:
+      tls:
+        enabled: True
+        auth:
+          enabled: True
+        cert_file: /etc/contrail/server.pem
+        key_file: /etc/contrail/privkey.pem
+        ca_cert_file: /etc/contrail/ca-cert.pem
   database:
     version: 4.0
     config_only: true
diff --git a/tests/pillar/vrouter3.sls b/tests/pillar/vrouter3.sls
index 807b510..fbf2550 100644
--- a/tests/pillar/vrouter3.sls
+++ b/tests/pillar/vrouter3.sls
@@ -48,3 +48,11 @@
           user: admin
           password: "supersecretpassword123"
           tenant: admin
+    xmpp:
+      tls:
+        enabled: True
+        auth:
+          enabled: True
+        cert_file: /etc/contrail/server.pem
+        key_file: /etc/contrail/privkey.pem
+        ca_cert_file: /etc/contrail/ca-cert.pem
\ No newline at end of file
diff --git a/tests/pillar/vrouter40.sls b/tests/pillar/vrouter40.sls
index 16cdcff..e1ebc84 100644
--- a/tests/pillar/vrouter40.sls
+++ b/tests/pillar/vrouter40.sls
@@ -52,3 +52,11 @@
           user: admin
           password: "supersecretpassword123"
           tenant: admin
+    xmpp:
+      tls:
+        enabled: True
+        auth:
+          enabled: True
+        cert_file: /etc/contrail/server.pem
+        key_file: /etc/contrail/privkey.pem
+        ca_cert_file: /etc/contrail/ca-cert.pem
\ No newline at end of file