diff --git a/octavia/files/ocata/certificates/openssl.cnf b/octavia/files/ocata/certificates/openssl.cnf
new file mode 100644
index 0000000..0e2c328
--- /dev/null
+++ b/octavia/files/ocata/certificates/openssl.cnf
@@ -0,0 +1,350 @@
+#
+# OpenSSL example configuration file.
+# This is mostly being used for generation of certificate requests.
+#
+
+# This definition stops the following lines choking if HOME isn't
+# defined.
+HOME			= .
+RANDFILE		= $ENV::HOME/.rnd
+
+# Extra OBJECT IDENTIFIER info:
+#oid_file		= $ENV::HOME/.oid
+oid_section		= new_oids
+
+# To use this configuration file with the "-extfile" option of the
+# "openssl x509" utility, name here the section containing the
+# X.509v3 extensions to use:
+# extensions		=
+# (Alternatively, use a configuration file that has only
+# X.509v3 extensions in its main [= default] section.)
+
+[ new_oids ]
+
+# We can add new OIDs in here for use by 'ca', 'req' and 'ts'.
+# Add a simple OID like this:
+# testoid1=1.2.3.4
+# Or use config file substitution like this:
+# testoid2=${testoid1}.5.6
+
+# Policies used by the TSA examples.
+tsa_policy1 = 1.2.3.4.1
+tsa_policy2 = 1.2.3.4.5.6
+tsa_policy3 = 1.2.3.4.5.7
+
+####################################################################
+[ ca ]
+default_ca	= CA_default		# The default ca section
+
+####################################################################
+[ CA_default ]
+
+dir		= ./		# Where everything is kept
+certs		= $dir/certs		# Where the issued certs are kept
+crl_dir		= $dir/crl		# Where the issued crl are kept
+database	= $dir/index.txt	# database index file.
+#unique_subject	= no			# Set to 'no' to allow creation of
+                    # several ctificates with same subject.
+new_certs_dir	= $dir/newcerts		# default place for new certs.
+
+certificate	= $dir/ca_01.pem 	# The CA certificate
+serial		= $dir/serial 		# The current serial number
+crlnumber	= $dir/crlnumber	# the current crl number
+                    # must be commented out to leave a V1 CRL
+crl		= $dir/crl.pem 		# The current CRL
+private_key	= $dir/private/cakey.pem# The private key
+RANDFILE	= $dir/private/.rand	# private random number file
+
+x509_extensions	= usr_cert		# The extensions to add to the cert
+
+# Comment out the following two lines for the "traditional"
+# (and highly broken) format.
+name_opt 	= ca_default		# Subject Name options
+cert_opt 	= ca_default		# Certificate field options
+
+# Extension copying option: use with caution.
+# copy_extensions = copy
+
+# Extensions to add to a CRL. Note: Netscape communicator chokes on V2 CRLs
+# so this is commented out by default to leave a V1 CRL.
+# crlnumber must also be commented out to leave a V1 CRL.
+# crl_extensions	= crl_ext
+
+default_days	= 365			# how long to certify for
+default_crl_days= 30			# how long before next CRL
+default_md	= default		# use public key default MD
+preserve	= no			# keep passed DN ordering
+
+# A few difference way of specifying how similar the request should look
+# For type CA, the listed attributes must be the same, and the optional
+# and supplied fields are just that :-)
+policy		= policy_match
+
+# For the CA policy
+[ policy_match ]
+countryName		= match
+stateOrProvinceName	= match
+organizationName	= match
+organizationalUnitName	= optional
+commonName		= supplied
+emailAddress		= optional
+
+# For the 'anything' policy
+# At this point in time, you must list all acceptable 'object'
+# types.
+[ policy_anything ]
+countryName		= optional
+stateOrProvinceName	= optional
+localityName		= optional
+organizationName	= optional
+organizationalUnitName	= optional
+commonName		= supplied
+emailAddress		= optional
+
+####################################################################
+[ req ]
+default_bits		= 2048
+default_keyfile 	= privkey.pem
+distinguished_name	= req_distinguished_name
+attributes		= req_attributes
+x509_extensions	= v3_ca	# The extensions to add to the self signed cert
+
+# Passwords for private keys if not present they will be prompted for
+# input_password = secret
+# output_password = secret
+
+# This sets a mask for permitted string types. There are several options.
+# default: PrintableString, T61String, BMPString.
+# pkix	 : PrintableString, BMPString (PKIX recommendation before 2004)
+# utf8only: only UTF8Strings (PKIX recommendation after 2004).
+# nombstr : PrintableString, T61String (no BMPStrings or UTF8Strings).
+# MASK:XXXX a literal mask value.
+# WARNING: ancient versions of Netscape crash on BMPStrings or UTF8Strings.
+string_mask = utf8only
+
+# req_extensions = v3_req # The extensions to add to a certificate request
+
+[ req_distinguished_name ]
+countryName			= Country Name (2 letter code)
+countryName_default		= AU
+countryName_min			= 2
+countryName_max			= 2
+
+stateOrProvinceName		= State or Province Name (full name)
+stateOrProvinceName_default	= Some-State
+
+localityName			= Locality Name (eg, city)
+
+0.organizationName		= Organization Name (eg, company)
+0.organizationName_default	= Internet Widgits Pty Ltd
+
+# we can do this but it is not needed normally :-)
+#1.organizationName		= Second Organization Name (eg, company)
+#1.organizationName_default	= World Wide Web Pty Ltd
+
+organizationalUnitName		= Organizational Unit Name (eg, section)
+#organizationalUnitName_default	=
+
+commonName			= Common Name (e.g. server FQDN or YOUR name)
+commonName_max			= 64
+
+emailAddress			= Email Address
+emailAddress_max		= 64
+
+# SET-ex3			= SET extension number 3
+
+[ req_attributes ]
+challengePassword		= A challenge password
+challengePassword_min		= 4
+challengePassword_max		= 20
+
+unstructuredName		= An optional company name
+
+[ usr_cert ]
+
+# These extensions are added when 'ca' signs a request.
+
+# This goes against PKIX guidelines but some CAs do it and some software
+# requires this to avoid interpreting an end user certificate as a CA.
+
+basicConstraints=CA:FALSE
+
+# Here are some examples of the usage of nsCertType. If it is omitted
+# the certificate can be used for anything *except* object signing.
+
+# This is OK for an SSL server.
+# nsCertType			= server
+
+# For an object signing certificate this would be used.
+# nsCertType = objsign
+
+# For normal client use this is typical
+# nsCertType = client, email
+
+# and for everything including object signing:
+# nsCertType = client, email, objsign
+
+# This is typical in keyUsage for a client certificate.
+# keyUsage = nonRepudiation, digitalSignature, keyEncipherment
+
+# This will be displayed in Netscape's comment listbox.
+nsComment			= "OpenSSL Generated Certificate"
+
+# PKIX recommendations harmless if included in all certificates.
+subjectKeyIdentifier=hash
+authorityKeyIdentifier=keyid,issuer
+
+# This stuff is for subjectAltName and issuerAltname.
+# Import the email address.
+# subjectAltName=email:copy
+# An alternative to produce certificates that aren't
+# deprecated according to PKIX.
+# subjectAltName=email:move
+
+# Copy subject details
+# issuerAltName=issuer:copy
+
+#nsCaRevocationUrl		= http://www.domain.dom/ca-crl.pem
+#nsBaseUrl
+#nsRevocationUrl
+#nsRenewalUrl
+#nsCaPolicyUrl
+#nsSslServerName
+
+# This is required for TSA certificates.
+# extendedKeyUsage = critical,timeStamping
+
+[ v3_req ]
+
+# Extensions to add to a certificate request
+
+basicConstraints = CA:FALSE
+keyUsage = nonRepudiation, digitalSignature, keyEncipherment
+
+[ v3_ca ]
+
+
+# Extensions for a typical CA
+
+
+# PKIX recommendation.
+
+subjectKeyIdentifier=hash
+
+authorityKeyIdentifier=keyid:always,issuer
+
+# This is what PKIX recommends but some broken software chokes on critical
+# extensions.
+#basicConstraints = critical,CA:true
+# So we do this instead.
+basicConstraints = CA:true
+
+# Key usage: this is typical for a CA certificate. However since it will
+# prevent it being used as an test self-signed certificate it is best
+# left out by default.
+# keyUsage = cRLSign, keyCertSign
+
+# Some might want this also
+# nsCertType = sslCA, emailCA
+
+# Include email address in subject alt name: another PKIX recommendation
+# subjectAltName=email:copy
+# Copy issuer details
+# issuerAltName=issuer:copy
+
+# DER hex encoding of an extension: beware experts only!
+# obj=DER:02:03
+# Where 'obj' is a standard or added object
+# You can even override a supported extension:
+# basicConstraints= critical, DER:30:03:01:01:FF
+
+[ crl_ext ]
+
+# CRL extensions.
+# Only issuerAltName and authorityKeyIdentifier make any sense in a CRL.
+
+# issuerAltName=issuer:copy
+authorityKeyIdentifier=keyid:always
+
+[ proxy_cert_ext ]
+# These extensions should be added when creating a proxy certificate
+
+# This goes against PKIX guidelines but some CAs do it and some software
+# requires this to avoid interpreting an end user certificate as a CA.
+
+basicConstraints=CA:FALSE
+
+# Here are some examples of the usage of nsCertType. If it is omitted
+# the certificate can be used for anything *except* object signing.
+
+# This is OK for an SSL server.
+# nsCertType			= server
+
+# For an object signing certificate this would be used.
+# nsCertType = objsign
+
+# For normal client use this is typical
+# nsCertType = client, email
+
+# and for everything including object signing:
+# nsCertType = client, email, objsign
+
+# This is typical in keyUsage for a client certificate.
+# keyUsage = nonRepudiation, digitalSignature, keyEncipherment
+
+# This will be displayed in Netscape's comment listbox.
+nsComment			= "OpenSSL Generated Certificate"
+
+# PKIX recommendations harmless if included in all certificates.
+subjectKeyIdentifier=hash
+authorityKeyIdentifier=keyid,issuer
+
+# This stuff is for subjectAltName and issuerAltname.
+# Import the email address.
+# subjectAltName=email:copy
+# An alternative to produce certificates that aren't
+# deprecated according to PKIX.
+# subjectAltName=email:move
+
+# Copy subject details
+# issuerAltName=issuer:copy
+
+#nsCaRevocationUrl		= http://www.domain.dom/ca-crl.pem
+#nsBaseUrl
+#nsRevocationUrl
+#nsRenewalUrl
+#nsCaPolicyUrl
+#nsSslServerName
+
+# This really needs to be in place for it to be a proxy certificate.
+proxyCertInfo=critical,language:id-ppl-anyLanguage,pathlen:3,policy:foo
+
+####################################################################
+[ tsa ]
+
+default_tsa = tsa_config1	# the default TSA section
+
+[ tsa_config1 ]
+
+# These are used by the TSA reply generation only.
+dir		= ./demoCA		# TSA root directory
+serial		= $dir/tsaserial	# The current serial number (mandatory)
+crypto_device	= builtin		# OpenSSL engine to use for signing
+signer_cert	= $dir/tsacert.pem 	# The TSA signing certificate
+                    # (optional)
+certs		= $dir/cacert.pem	# Certificate chain to include in reply
+                    # (optional)
+signer_key	= $dir/private/tsakey.pem # The TSA private key (optional)
+
+default_policy	= tsa_policy1		# Policy if request did not specify it
+                    # (optional)
+other_policies	= tsa_policy2, tsa_policy3	# acceptable policies (optional)
+digests		= md5, sha1		# Acceptable message digests (mandatory)
+accuracy	= secs:1, millisecs:500, microsecs:100	# (optional)
+clock_precision_digits  = 0	# number of digits after dot. (optional)
+ordering		= yes	# Is ordering defined for timestamps?
+                # (optional, default: no)
+tsa_name		= yes	# Must the TSA name be included in the reply?
+                # (optional, default: no)
+ess_cert_id_chain	= no	# Must the ESS cert id chain be included?
+                # (optional, default: no)
diff --git a/octavia/files/ocata/dhcp/dhclient.conf b/octavia/files/ocata/dhcp/dhclient.conf
new file mode 100644
index 0000000..29e3315
--- /dev/null
+++ b/octavia/files/ocata/dhcp/dhclient.conf
@@ -0,0 +1,2 @@
+request subnet-mask,broadcast-address,interface-mtu;
+do-forward-updates false;
diff --git a/octavia/files/ocata/octavia.conf b/octavia/files/ocata/octavia.conf
new file mode 100644
index 0000000..d4e9b5f
--- /dev/null
+++ b/octavia/files/ocata/octavia.conf
@@ -0,0 +1,2067 @@
+{%- from "octavia/map.jinja" import server with context %}
+[DEFAULT]
+
+#
+# From octavia
+#
+
+# The host IP to bind to (IP address value)
+#bind_host = 127.0.0.1
+bind_host = {{ server.bind.address }}
+
+# The port to bind to (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#bind_port = 9876
+bind_port = {{ server.bind.port }}
+
+# The auth strategy for API requests. (string value)
+# Allowed values: noauth, keystone
+#auth_strategy = noauth
+
+# The handler that the API communicates with (string value)
+#api_handler = queue_producer
+
+# The API paste config file to use (string value)
+#api_paste_config = api-paste.ini
+
+# The path for API extensions (string value)
+#api_extensions_path =
+
+# Allow the usage of the bulk API (boolean value)
+#allow_bulk = true
+
+# Allow the usage of the pagination (boolean value)
+#allow_pagination = false
+
+# Allow the usage of the sorting (boolean value)
+#allow_sorting = false
+
+# The maximum number of items returned in a single response. The string
+# 'infinite' or a negative integer value means 'no limit' (string value)
+#pagination_max_limit = -1
+
+# The hostname Octavia is running on (string value)
+#host = example.domain
+
+# Name of the controller plugin to use (string value)
+#octavia_plugins = hot_plug_plugin
+
+#
+# From oslo.log
+#
+
+# If set to true, the logging level will be set to DEBUG instead of the default
+# INFO level. (boolean value)
+# Note: This option can be changed without restarting.
+#debug = false
+debug = {{ server.get('debug', 'False') }}
+
+# DEPRECATED: If set to false, the logging level will be set to WARNING instead
+# of the default INFO level. (boolean value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#verbose = true
+verbose = True
+
+# The name of a logging configuration file. This file is appended to any
+# existing logging configuration files. For details about logging configuration
+# files, see the Python logging module documentation. Note that when logging
+# configuration files are used then all logging configuration is set in the
+# configuration file and other logging configuration options are ignored (for
+# example, logging_context_format_string). (string value)
+# Note: This option can be changed without restarting.
+# Deprecated group/name - [DEFAULT]/log_config
+#log_config_append = <None>
+
+# Defines the format string for %%(asctime)s in log records. Default:
+# %(default)s . This option is ignored if log_config_append is set. (string
+# value)
+#log_date_format = %Y-%m-%d %H:%M:%S
+
+# (Optional) Name of log file to send logging output to. If no default is set,
+# logging will go to stderr as defined by use_stderr. This option is ignored if
+# log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logfile
+#log_file = <None>
+
+# (Optional) The base directory used for relative log_file  paths. This option
+# is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logdir
+#log_dir = <None>
+
+# Uses logging handler designed to watch file system. When log file is moved or
+# removed this handler will open a new log file with specified path
+# instantaneously. It makes sense only if log_file option is specified and
+# Linux platform is used. This option is ignored if log_config_append is set.
+# (boolean value)
+#watch_log_file = false
+
+# Use syslog for logging. Existing syslog format is DEPRECATED and will be
+# changed later to honor RFC5424. This option is ignored if log_config_append
+# is set. (boolean value)
+#use_syslog = false
+
+# Syslog facility to receive log lines. This option is ignored if
+# log_config_append is set. (string value)
+#syslog_log_facility = LOG_USER
+
+# Log output to standard error. This option is ignored if log_config_append is
+# set. (boolean value)
+#use_stderr = false
+
+# Format string to use for log messages with context. (string value)
+#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
+
+# Format string to use for log messages when context is undefined. (string
+# value)
+#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
+
+# Additional data to append to log message when logging level for the message
+# is DEBUG. (string value)
+#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
+
+# Prefix each line of exception output with this format. (string value)
+#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
+
+# Defines the format string for %(user_identity)s that is used in
+# logging_context_format_string. (string value)
+#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
+
+# List of package logging levels in logger=LEVEL pairs. This option is ignored
+# if log_config_append is set. (list value)
+#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
+
+# Enables or disables publication of error events. (boolean value)
+#publish_errors = false
+
+# The format for an instance that is passed with the log message. (string
+# value)
+#instance_format = "[instance: %(uuid)s] "
+
+# The format for an instance UUID that is passed with the log message. (string
+# value)
+#instance_uuid_format = "[instance: %(uuid)s] "
+
+# Interval, number of seconds, of log rate limiting. (integer value)
+#rate_limit_interval = 0
+
+# Maximum number of logged messages per rate_limit_interval. (integer value)
+#rate_limit_burst = 0
+
+# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG
+# or empty string. Logs with level greater or equal to rate_limit_except_level
+# are not filtered. An empty string means that all levels are filtered. (string
+# value)
+#rate_limit_except_level = CRITICAL
+
+# Enables or disables fatal status of deprecations. (boolean value)
+#fatal_deprecations = false
+
+#
+# From oslo.messaging
+#
+
+# Size of RPC connection pool. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_conn_pool_size
+#rpc_conn_pool_size = 30
+
+# The pool size limit for connections expiration policy (integer value)
+#conn_pool_min_size = 2
+
+# The time-to-live in sec of idle connections in the pool (integer value)
+#conn_pool_ttl = 1200
+
+# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
+# The "host" option should point or resolve to this address. (string value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_bind_address
+#rpc_zmq_bind_address = *
+
+# MatchMaker driver. (string value)
+# Allowed values: redis, sentinel, dummy
+# Deprecated group/name - [DEFAULT]/rpc_zmq_matchmaker
+#rpc_zmq_matchmaker = redis
+
+# Number of ZeroMQ contexts, defaults to 1. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_contexts
+#rpc_zmq_contexts = 1
+
+# Maximum number of ingress messages to locally buffer per topic. Default is
+# unlimited. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_topic_backlog
+#rpc_zmq_topic_backlog = <None>
+
+# Directory for holding IPC sockets. (string value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_ipc_dir
+#rpc_zmq_ipc_dir = /var/run/openstack
+
+# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
+# "host" option, if running Nova. (string value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_host
+#rpc_zmq_host = localhost
+
+# Number of seconds to wait before all pending messages will be sent after
+# closing a socket. The default value of -1 specifies an infinite linger
+# period. The value of 0 specifies no linger period. Pending messages shall be
+# discarded immediately when the socket is closed. Positive values specify an
+# upper bound for the linger period. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
+#zmq_linger = -1
+
+# The default number of seconds that poll should wait. Poll raises timeout
+# exception when timeout expired. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_poll_timeout
+#rpc_poll_timeout = 1
+
+# Expiration timeout in seconds of a name service record about existing target
+# ( < 0 means no timeout). (integer value)
+# Deprecated group/name - [DEFAULT]/zmq_target_expire
+#zmq_target_expire = 300
+
+# Update period in seconds of a name service record about existing target.
+# (integer value)
+# Deprecated group/name - [DEFAULT]/zmq_target_update
+#zmq_target_update = 180
+
+# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
+# value)
+# Deprecated group/name - [DEFAULT]/use_pub_sub
+#use_pub_sub = false
+
+# Use ROUTER remote proxy. (boolean value)
+# Deprecated group/name - [DEFAULT]/use_router_proxy
+#use_router_proxy = false
+
+# This option makes direct connections dynamic or static. It makes sense only
+# with use_router_proxy=False which means to use direct connections for direct
+# message types (ignored otherwise). (boolean value)
+#use_dynamic_connections = false
+
+# How many additional connections to a host will be made for failover reasons.
+# This option is actual only in dynamic connections mode. (integer value)
+#zmq_failover_connections = 2
+
+# Minimal port number for random ports range. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+# Deprecated group/name - [DEFAULT]/rpc_zmq_min_port
+#rpc_zmq_min_port = 49153
+
+# Maximal port number for random ports range. (integer value)
+# Minimum value: 1
+# Maximum value: 65536
+# Deprecated group/name - [DEFAULT]/rpc_zmq_max_port
+#rpc_zmq_max_port = 65536
+
+# Number of retries to find free port number before fail with ZMQBindError.
+# (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_bind_port_retries
+#rpc_zmq_bind_port_retries = 100
+
+# Default serialization mechanism for serializing/deserializing
+# outgoing/incoming messages (string value)
+# Allowed values: json, msgpack
+# Deprecated group/name - [DEFAULT]/rpc_zmq_serialization
+#rpc_zmq_serialization = json
+
+# This option configures round-robin mode in zmq socket. True means not keeping
+# a queue when server side disconnects. False means to keep queue and messages
+# even if server is disconnected, when the server appears we send all
+# accumulated messages to it. (boolean value)
+#zmq_immediate = true
+
+# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
+# other negative value) means to skip any overrides and leave it to OS default;
+# 0 and 1 (or any other positive value) mean to disable and enable the option
+# respectively. (integer value)
+#zmq_tcp_keepalive = -1
+
+# The duration between two keepalive transmissions in idle condition. The unit
+# is platform dependent, for example, seconds in Linux, milliseconds in Windows
+# etc. The default value of -1 (or any other negative value and 0) means to
+# skip any overrides and leave it to OS default. (integer value)
+#zmq_tcp_keepalive_idle = -1
+
+# The number of retransmissions to be carried out before declaring that remote
+# end is not available. The default value of -1 (or any other negative value
+# and 0) means to skip any overrides and leave it to OS default. (integer
+# value)
+#zmq_tcp_keepalive_cnt = -1
+
+# The duration between two successive keepalive retransmissions, if
+# acknowledgement to the previous keepalive transmission is not received. The
+# unit is platform dependent, for example, seconds in Linux, milliseconds in
+# Windows etc. The default value of -1 (or any other negative value and 0)
+# means to skip any overrides and leave it to OS default. (integer value)
+#zmq_tcp_keepalive_intvl = -1
+
+# Maximum number of (green) threads to work concurrently. (integer value)
+#rpc_thread_pool_size = 100
+
+# Expiration timeout in seconds of a sent/received message after which it is
+# not tracked anymore by a client/server. (integer value)
+#rpc_message_ttl = 300
+
+# Wait for message acknowledgements from receivers. This mechanism works only
+# via proxy without PUB/SUB. (boolean value)
+#rpc_use_acks = false
+
+# Number of seconds to wait for an ack from a cast/call. After each retry
+# attempt this timeout is multiplied by some specified multiplier. (integer
+# value)
+#rpc_ack_timeout_base = 15
+
+# Number to multiply base ack timeout by after each retry attempt. (integer
+# value)
+#rpc_ack_timeout_multiplier = 2
+
+# Default number of message sending attempts in case of any problems occurred:
+# positive value N means at most N retries, 0 means no retries, None or -1 (or
+# any other negative values) mean to retry forever. This option is used only if
+# acknowledgments are enabled. (integer value)
+#rpc_retry_attempts = 3
+
+# List of publisher hosts SubConsumer can subscribe on. This option has higher
+# priority then the default publishers list taken from the matchmaker. (list
+# value)
+#subscribe_on =
+
+# Size of executor thread pool. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
+#executor_thread_pool_size = 64
+
+# Seconds to wait for a response from a call. (integer value)
+#rpc_response_timeout = 60
+
+# A URL representing the messaging driver to use and its full configuration.
+# (string value)
+#transport_url = <None>
+{%- if server.message_queue.members is defined %}
+transport_url = rabbit://{% for member in server.message_queue.members -%}
+                             {{ server.message_queue.user }}:{{ server.message_queue.password }}@{{ member.host }}:{{ member.get('port', 5672) }}
+                             {%- if not loop.last -%},{%- endif -%}
+                         {%- endfor -%}
+                             /{{ server.message_queue.virtual_host }}
+{%- else %}
+transport_url = rabbit://{{ server.message_queue.user }}:{{ server.message_queue.password }}@{{ server.message_queue.host }}:{{ server.message_queue.port }}/{{ server.message_queue.virtual_host }}
+{%- endif %}
+
+# DEPRECATED: The messaging driver to use, defaults to rabbit. Other drivers
+# include amqp and zmq. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rpc_backend = rabbit
+
+# The default exchange under which topics are scoped. May be overridden by an
+# exchange name specified in the transport_url option. (string value)
+#control_exchange = octavia
+
+#
+# From oslo.service.service
+#
+
+# Enable eventlet backdoor.  Acceptable values are 0, <port>, and
+# <start>:<end>, where 0 results in listening on a random tcp port number;
+# <port> results in listening on the specified port number (and not enabling
+# backdoor if that port is in use); and <start>:<end> results in listening on
+# the smallest unused port number within the specified range of port numbers.
+# The chosen port is displayed in the service's log file. (string value)
+#backdoor_port = <None>
+
+# Enable eventlet backdoor, using the provided path as a unix socket that can
+# receive connections. This option is mutually exclusive with 'backdoor_port'
+# in that only one should be provided. If both are provided then the existence
+# of this option overrides the usage of that option. (string value)
+#backdoor_socket = <None>
+
+# Enables or disables logging values of all registered options when starting a
+# service (at DEBUG level). (boolean value)
+#log_options = true
+
+# Specify a timeout after which a gracefully shutdown server will exit. Zero
+# value means endless wait. (integer value)
+#graceful_shutdown_timeout = 60
+
+[amphora_agent]
+
+#
+# From octavia
+#
+
+# The ca which signed the client certificates (string value)
+#agent_server_ca = /etc/octavia/certs/client_ca.pem
+
+# The server certificate for the agent.py server to use (string value)
+#agent_server_cert = /etc/octavia/certs/server.pem
+
+# The directory where new network interfaces are located (string value)
+#agent_server_network_dir = <None>
+
+# The file where the network interfaces are located. Specifying this will
+# override any value set for agent_server_network_dir. (string value)
+#agent_server_network_file = <None>
+
+# The time in seconds to allow a request from the controller to run before
+# terminating the socket. (integer value)
+#agent_request_read_timeout = 120
+
+# The amphora ID. (string value)
+#amphora_id = <None>
+
+[certificates]
+
+#
+# From octavia
+#
+
+# Absolute path to the CA Certificate for signing. Defaults
+# to env[OS_OCTAVIA_TLS_CA_CERT].
+# ca_certificate = /etc/ssl/certs/ssl-cert-snakeoil.pem
+ca_certificate =
+
+# Absolute path to the Private Key for signing. Defaults
+# to env[OS_OCTAVIA_TLS_CA_KEY].
+# ca_private_key = /etc/ssl/private/ssl-cert-snakeoil.key
+ca_private_key =
+
+# Passphrase for the Private Key. Defaults
+# to env[OS_OCTAVIA_CA_KEY_PASS] or None.
+# ca_private_key_passphrase =
+ca_private_key_passphrase =
+
+# Certificate signing digest. Defaults
+# to env[OS_OCTAVIA_CA_SIGNING_DIGEST] or "sha256".
+# signing_digest = sha256
+
+# Absolute path to the certificate storage directory.
+# Defaults to env[OS_OCTAVIA_TLS_STORAGE].
+# storage_path = /var/lib/octavia/certificates/
+
+# Name of the cert manager to use (string value)
+#cert_manager = barbican_cert_manager
+
+# Name of the cert generator to use (string value)
+#cert_generator = local_cert_generator
+
+# Name of the Barbican authentication method to use (string value)
+#barbican_auth = barbican_acl_auth
+
+# The name of the certificate service in the keystonecatalog (string value)
+#service_name = <None>
+
+# A new endpoint to override the endpoint in the keystone catalog. (string
+# value)
+#endpoint = <None>
+
+# Region in Identity service catalog to use for communication with the barbican
+# service. (string value)
+#region_name = <None>
+
+# The endpoint_type to be used for barbican service. (string value)
+#endpoint_type = publicURL
+
+# CA certificates file path (string value)
+#ca_certificates_file = <None>
+
+# Disable certificate validation on SSL connections  (boolean value)
+#insecure = false
+
+[controller_worker]
+
+#
+# From octavia
+#
+
+# Retry attempts to wait for Amphora to become active (integer value)
+#amp_active_retries = 10
+amp_active_retries = 100
+
+# Seconds to wait between checks on whether an Amphora has become active
+# (integer value)
+#amp_active_wait_sec = 10
+amp_active_wait_sec = 2
+
+# Nova instance flavor id for the Amphora (string value)
+#amp_flavor_id =
+amp_flavor_id = 92b3fb9c-2ef2-4964-b145-3bbc02646353
+
+# Glance image tag for the Amphora image to boot. Use this option to be able to
+# update the image without reconfiguring Octavia. Ignored if amp_image_id is
+# defined. (string value)
+#amp_image_tag =
+amp_image_tag = amphora
+
+# DEPRECATED: Glance image id for the Amphora image to boot (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Superseded by amp_image_tag option.
+#amp_image_id =
+
+# Restrict glance image selection to a specific owner ID.  This is a
+# recommended security setting. (string value)
+#amp_image_owner_id =
+amp_image_owner_id = 625e4ec921b8496ead595c25e289578e
+
+# SSH key name used to boot the Amphora (string value)
+#amp_ssh_key_name =
+amp_ssh_key_name = octavia_ssh_key
+
+# Determines whether or not to allow access to the Amphorae (boolean value)
+#amp_ssh_access_allowed = true
+
+# List of networks to attach to the Amphorae. All networks defined in the list
+# will be attached to each amphora. (list value)
+#amp_boot_network_list =
+amp_boot_network_list = 78273e19-2acc-4f88-8af2-47430084db16
+
+# DEPRECATED: Network to attach to the Amphorae. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by amp_boot_network_list.
+#amp_network =
+
+# List of security groups to attach to the Amphora. (list value)
+#amp_secgroup_list =
+amp_secgroup_list = 996fbc7f-b3c3-4959-8f04-2273681dc854
+
+# Client CA for the amphora agent to use (string value)
+#client_ca = /etc/octavia/certs/ca_01.pem
+
+# Name of the amphora driver to use (string value)
+#amphora_driver = amphora_noop_driver
+amphora_driver = amphora_haproxy_rest_driver
+
+# Name of the compute driver to use (string value)
+#compute_driver = compute_noop_driver
+compute_driver = compute_nova_driver
+
+# Name of the network driver to use (string value)
+#network_driver = network_noop_driver
+network_driver = allowed_address_pairs_driver
+
+# Load balancer topology configuration. SINGLE - One amphora per load balancer.
+# ACTIVE_STANDBY - Two amphora per load balancer. (string value)
+# Allowed values: ACTIVE_STANDBY, SINGLE
+#loadbalancer_topology = SINGLE
+loadbalancer_topology =
+
+# If True, build cloud-init user-data that is passed to the config drive on
+# Amphora boot instead of personality files. If False, utilize personality
+# files. (boolean value)
+#user_data_config_drive = false
+
+[cors]
+
+#
+# From oslo.middleware.cors
+#
+
+# Indicate whether this resource may be shared with the domain received in the
+# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
+# slash. Example: https://horizon.example.com (list value)
+#allowed_origin = <None>
+{%- if server.cors.allowed_origin is defined %}
+allowed_origin = {{ server.cors.allowed_origin }}
+{%- endif %}
+
+# Indicate that the actual request can include user credentials (boolean value)
+#allow_credentials = true
+{%- if server.cors.allow_credentials is defined %}
+allow_credentials = {{ server.cors.allow_credentials }}
+{%- endif %}
+
+# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
+# Headers. (list value)
+#expose_headers =
+{%- if server.cors.expose_headers is defined %}
+expose_headers = {{ server.cors.expose_headers }}
+{%- endif %}
+
+# Maximum cache age of CORS preflight requests. (integer value)
+#max_age = 3600
+{%- if server.cors.max_age is defined %}
+max_age = {{ server.cors.max_age }}
+{%- endif %}
+
+# Indicate which methods can be used during the actual request. (list value)
+#allow_methods = OPTIONS,GET,HEAD,POST,PUT,DELETE,TRACE,PATCH
+{%- if server.cors.allow_methods is defined %}
+allow_methods = {{ server.cors.allow_methods }}
+{%- endif %}
+
+# Indicate which header field names may be used during the actual request.
+# (list value)
+#allow_headers =
+{%- if server.cors.allow_headers is defined %}
+allow_headers = {{ server.cors.allow_headers }}
+{%- endif %}
+
+[cors.subdomain]
+
+#
+# From oslo.middleware.cors
+#
+
+# Indicate whether this resource may be shared with the domain received in the
+# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
+# slash. Example: https://horizon.example.com (list value)
+#allowed_origin = <None>
+
+# Indicate that the actual request can include user credentials (boolean value)
+#allow_credentials = true
+
+# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
+# Headers. (list value)
+#expose_headers = X-Auth-Token,X-Subject-Token,X-Service-Token,X-OpenStack-Request-ID,OpenStack-Volume-microversion
+
+# Maximum cache age of CORS preflight requests. (integer value)
+#max_age = 3600
+
+# Indicate which methods can be used during the actual request. (list value)
+#allow_methods = GET,PUT,POST,DELETE,PATCH
+
+# Indicate which header field names may be used during the actual request.
+# (list value)
+#allow_headers = X-Auth-Token,X-Identity-Status,X-Roles,X-Service-Catalog,X-User-Id,X-Tenant-Id,X-OpenStack-Request-ID
+
+[database]
+
+#
+# From oslo.db
+#
+
+# DEPRECATED: The file name to use with SQLite. (string value)
+# Deprecated group/name - [DEFAULT]/sqlite_db
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Should use config option connection or slave_connection to connect
+# the database.
+#sqlite_db = oslo.sqlite
+
+# If True, SQLite uses synchronous mode. (boolean value)
+# Deprecated group/name - [DEFAULT]/sqlite_synchronous
+#sqlite_synchronous = true
+
+# The back end to use for the database. (string value)
+# Deprecated group/name - [DEFAULT]/db_backend
+#backend = sqlalchemy
+
+# The SQLAlchemy connection string to use to connect to the database. (string
+# value)
+# Deprecated group/name - [DEFAULT]/sql_connection
+# Deprecated group/name - [DATABASE]/sql_connection
+# Deprecated group/name - [sql]/connection
+#connection = <None>
+connection = {{ server.database.engine }}+pymysql://{{ server.database.user }}:{{ server.database.password }}@{{ server.database.host }}/{{ server.database.name }}?charset=utf8
+
+# The SQLAlchemy connection string to use to connect to the slave database.
+# (string value)
+#slave_connection = <None>
+
+# The SQL mode to be used for MySQL sessions. This option, including the
+# default, overrides any server-set SQL mode. To use whatever SQL mode is set
+# by the server configuration, set this to no value. Example: mysql_sql_mode=
+# (string value)
+#mysql_sql_mode = TRADITIONAL
+
+# Timeout before idle SQL connections are reaped. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_idle_timeout
+# Deprecated group/name - [DATABASE]/sql_idle_timeout
+# Deprecated group/name - [sql]/idle_timeout
+#idle_timeout = 3600
+
+# Minimum number of SQL connections to keep open in a pool. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_min_pool_size
+# Deprecated group/name - [DATABASE]/sql_min_pool_size
+#min_pool_size = 1
+
+# Maximum number of SQL connections to keep open in a pool. Setting a value of
+# 0 indicates no limit. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_max_pool_size
+# Deprecated group/name - [DATABASE]/sql_max_pool_size
+#max_pool_size = 5
+
+# Maximum number of database connection retries during startup. Set to -1 to
+# specify an infinite retry count. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_max_retries
+# Deprecated group/name - [DATABASE]/sql_max_retries
+#max_retries = 10
+
+# Interval between retries of opening a SQL connection. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_retry_interval
+# Deprecated group/name - [DATABASE]/reconnect_interval
+#retry_interval = 10
+
+# If set, use this value for max_overflow with SQLAlchemy. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_max_overflow
+# Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
+#max_overflow = 50
+
+# Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
+# value)
+# Minimum value: 0
+# Maximum value: 100
+# Deprecated group/name - [DEFAULT]/sql_connection_debug
+#connection_debug = 0
+
+# Add Python stack traces to SQL as comment strings. (boolean value)
+# Deprecated group/name - [DEFAULT]/sql_connection_trace
+#connection_trace = false
+
+# If set, use this value for pool_timeout with SQLAlchemy. (integer value)
+# Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
+#pool_timeout = <None>
+
+# Enable the experimental use of database reconnect on connection lost.
+# (boolean value)
+#use_db_reconnect = false
+
+# Seconds between retries of a database transaction. (integer value)
+#db_retry_interval = 1
+
+# If True, increases the interval between retries of a database operation up to
+# db_max_retry_interval. (boolean value)
+#db_inc_retry_interval = true
+
+# If db_inc_retry_interval is set, the maximum seconds between retries of a
+# database operation. (integer value)
+#db_max_retry_interval = 10
+
+# Maximum retries in case of connection error or deadlock error before error is
+# raised. Set to -1 to specify an infinite retry count. (integer value)
+#db_max_retries = 20
+
+[glance]
+
+#
+# From octavia
+#
+
+# The name of the glance service in the keystone catalog (string value)
+#service_name = <None>
+
+# A new endpoint to override the endpoint in the keystone catalog. (string
+# value)
+#endpoint = <None>
+
+# Region in Identity service catalog to use for communication with the
+# OpenStack services. (string value)
+#region_name = <None>
+
+# Endpoint interface in identity service to use (string value)
+#endpoint_type = publicURL
+
+# CA certificates file path (string value)
+#ca_certificates_file = <None>
+
+# Disable certificate validation on SSL connections  (boolean value)
+#insecure = false
+
+[haproxy_amphora]
+
+#
+# From octavia
+#
+
+# Base directory for amphora files. (string value)
+#base_path = /var/lib/octavia
+base_path = /var/lib/octavia
+
+# Base directory for cert storage. (string value)
+#base_cert_dir = /var/lib/octavia/certs
+base_cert_dir = /var/lib/octavia/certs
+
+# Custom haproxy template. (string value)
+#haproxy_template = <None>
+
+# Retry threshold for connecting to amphorae. (integer value)
+#connection_max_retries = 300
+connection_max_retries = 1500
+
+# Retry timeout between connection attempts in seconds. (integer value)
+#connection_retry_interval = 5
+connection_retry_interval = 1
+
+# The user group for haproxy to run under inside the amphora. (string value)
+#user_group = nogroup
+
+# Size of the HAProxy stick table. Accepts k, m, g suffixes.  Example: 10k
+# (string value)
+#haproxy_stick_size = 10k
+
+# The host IP to bind to (IP address value)
+#bind_host = ::
+
+# The port to bind to (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#bind_port = 9443
+
+# Network interface through which to reach amphora, only required if using IPv6
+# link local addresses. (string value)
+#lb_network_interface = o-hm0
+
+# The full path to haproxy (string value)
+#haproxy_cmd = /usr/sbin/haproxy
+
+# The respawn count for haproxy's upstart script (integer value)
+#respawn_count = 2
+
+# The respawn interval for haproxy's upstart script (integer value)
+#respawn_interval = 2
+
+# The time in seconds to wait for a REST API to connect. (floating point value)
+#rest_request_conn_timeout = 10
+rest_request_conn_timeout = 10
+
+# The time in seconds to wait for a REST API response. (floating point value)
+#rest_request_read_timeout = 60
+rest_request_read_timeout = 120
+
+# The client certificate to talk to the agent (string value)
+#client_cert = /etc/octavia/certs/client.pem
+client_cert = /etc/octavia/certs/client.pem
+
+# The ca which signed the server certificates (string value)
+#server_ca = /etc/octavia/certs/server_ca.pem
+server_ca = /etc/octavia/certs/ca_01.pem
+
+# DEPRECATED: If False, use sysvinit. (boolean value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: This is now automatically discovered  and configured.
+#use_upstart = true
+
+[health_manager]
+
+#
+# From octavia
+#
+
+# IP address the controller will listen on for heart beats (IP address value)
+#bind_ip = 127.0.0.1
+bind_ip =
+
+# Port number the controller will listen onfor heart beats (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#bind_port = 5555
+bind_port = 5555
+
+# Number of threads performing amphora failovers. (integer value)
+#failover_threads = 10
+
+# Number of threads performing amphora status update. (integer value)
+#status_update_threads = 50
+
+# key used to validate amphora sending the message (string value)
+#heartbeat_key = <None>
+heartbeat_key = insecure
+
+# Interval, in seconds, to wait before failing over an amphora. (integer value)
+#heartbeat_timeout = 60
+
+# Sleep time between health checks in seconds. (integer value)
+#health_check_interval = 3
+
+#  sets the value of the heartbeat recv buffer (integer value)
+#sock_rlimit = 0
+
+# List of controller ip and port pairs for the heartbeat receivers. Example
+# 127.0.0.1:5555, 192.168.0.1:5555 (list value)
+#controller_ip_port_list =
+controller_ip_port_list =
+
+# Sleep time between sending heartbeats. (integer value)
+#heartbeat_interval = 10
+
+# Specifies which driver to use for the event_streamer for syncing the octavia
+# and neutron_lbaas dbs. If you don't need to sync the database or are running
+# octavia in stand alone mode use the noop_event_streamer (string value)
+#event_streamer_driver = noop_event_streamer
+
+[house_keeping]
+
+#
+# From octavia
+#
+
+# Spare check interval in seconds (integer value)
+#spare_check_interval = 30
+
+# Number of spare amphorae (integer value)
+#spare_amphora_pool_size = 0
+
+# DB cleanup interval in seconds (integer value)
+#cleanup_interval = 30
+
+# Amphora expiry age in seconds (integer value)
+#amphora_expiry_age = 604800
+amphora_expiry_age = 3600
+
+# Load balancer expiry age in seconds (integer value)
+#load_balancer_expiry_age = 604800
+load_balancer_expiry_age = 3600
+
+# Certificate check interval in seconds (integer value)
+#cert_interval = 3600
+
+# Seconds until certificate expiration (integer value)
+#cert_expiry_buffer = 1209600
+
+# Number of threads performing amphora certificate rotation (integer value)
+#cert_rotate_threads = 10
+
+[keepalived_vrrp]
+
+#
+# From octavia
+#
+
+# Amphora role and priority advertisement interval in seconds. (integer value)
+#vrrp_advert_int = 1
+
+# VRRP health check script run interval in seconds. (integer value)
+#vrrp_check_interval = 5
+
+# Number of successive failures before transition to a fail state. (integer
+# value)
+#vrrp_fail_count = 2
+
+# Number of consecutive successes before transition to a success state.
+# (integer value)
+#vrrp_success_count = 2
+
+# Time in seconds between gratuitous ARP announcements from the MASTER.
+# (integer value)
+#vrrp_garp_refresh_interval = 5
+
+# Number of gratuitous ARP announcements to make on each refresh interval.
+# (integer value)
+#vrrp_garp_refresh_count = 2
+
+[keystone_authtoken]
+
+#
+# From keystonemiddleware.auth_token
+#
+
+# Complete "public" Identity API endpoint. This endpoint should not be an
+# "admin" endpoint, as it should be accessible by all end users.
+# Unauthenticated clients are redirected to this endpoint to authenticate.
+# Although this endpoint should  ideally be unversioned, client support in the
+# wild varies.  If you're using a versioned v2 endpoint here, then this  should
+# *not* be the same endpoint the service user utilizes  for validating tokens,
+# because normal end users may not be  able to reach that endpoint. (string
+# value)
+#auth_uri = <None>
+auth_uri=http://{{ server.identity.host }}:5000
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+# Do not handle authorization requests within the middleware, but delegate the
+# authorization decision to downstream WSGI components. (boolean value)
+#delay_auth_decision = false
+
+# Request timeout value for communicating with Identity API server. (integer
+# value)
+#http_connect_timeout = <None>
+
+# How many times are we trying to reconnect when communicating with Identity
+# API Server. (integer value)
+#http_request_max_retries = 3
+
+# Request environment key where the Swift cache object is stored. When
+# auth_token middleware is deployed with a Swift cache, use this option to have
+# the middleware share a caching backend with swift. Otherwise, use the
+# ``memcached_servers`` option instead. (string value)
+#cache = <None>
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+cafile =
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# The region in which the identity server can be found. (string value)
+#region_name = <None>
+
+# DEPRECATED: Directory used to cache files related to PKI tokens. This option
+# has been deprecated in the Ocata release and will be removed in the P
+# release. (string value)
+# This option is deprecated for removal since Ocata.
+# Its value may be silently ignored in the future.
+# Reason: PKI token format is no longer supported.
+#signing_dir = <None>
+signing_dir = /var/lib/cache/octavia
+
+# Optionally specify a list of memcached server(s) to use for caching. If left
+# undefined, tokens will instead be cached in-process. (list value)
+# Deprecated group/name - [keystone_authtoken]/memcache_servers
+#memcached_servers = <None>
+{%- if server.cache is defined %}
+memcached_servers={%- for member in server.cache.members %}{{ member.host }}:11211{% if not loop.last %},{% endif %}{%- endfor %}
+{%- endif %}
+
+# In order to prevent excessive effort spent validating tokens, the middleware
+# caches previously-seen tokens for a configurable duration (in seconds). Set
+# to -1 to disable caching completely. (integer value)
+#token_cache_time = 300
+
+# DEPRECATED: Determines the frequency at which the list of revoked tokens is
+# retrieved from the Identity service (in seconds). A high number of revocation
+# events combined with a low cache duration may significantly reduce
+# performance. Only valid for PKI tokens. This option has been deprecated in
+# the Ocata release and will be removed in the P release. (integer value)
+# This option is deprecated for removal since Ocata.
+# Its value may be silently ignored in the future.
+# Reason: PKI token format is no longer supported.
+#revocation_cache_time = 10
+
+# (Optional) If defined, indicate whether token data should be authenticated or
+# authenticated and encrypted. If MAC, token data is authenticated (with HMAC)
+# in the cache. If ENCRYPT, token data is encrypted and authenticated in the
+# cache. If the value is not one of these options or empty, auth_token will
+# raise an exception on initialization. (string value)
+# Allowed values: None, MAC, ENCRYPT
+#memcache_security_strategy = None
+
+# (Optional, mandatory if memcache_security_strategy is defined) This string is
+# used for key derivation. (string value)
+#memcache_secret_key = <None>
+
+# (Optional) Number of seconds memcached server is considered dead before it is
+# tried again. (integer value)
+#memcache_pool_dead_retry = 300
+
+# (Optional) Maximum total number of open connections to every memcached
+# server. (integer value)
+#memcache_pool_maxsize = 10
+
+# (Optional) Socket timeout in seconds for communicating with a memcached
+# server. (integer value)
+#memcache_pool_socket_timeout = 3
+
+# (Optional) Number of seconds a connection to memcached is held unused in the
+# pool before it is closed. (integer value)
+#memcache_pool_unused_timeout = 60
+
+# (Optional) Number of seconds that an operation will wait to get a memcached
+# client connection from the pool. (integer value)
+#memcache_pool_conn_get_timeout = 10
+
+# (Optional) Use the advanced (eventlet safe) memcached client pool. The
+# advanced pool will only work under python 2.x. (boolean value)
+#memcache_use_advanced_pool = false
+
+# (Optional) Indicate whether to set the X-Service-Catalog header. If False,
+# middleware will not ask for service catalog on token validation and will not
+# set the X-Service-Catalog header. (boolean value)
+#include_service_catalog = true
+
+# Used to control the use and type of token binding. Can be set to: "disabled"
+# to not check token binding. "permissive" (default) to validate binding
+# information if the bind type is of a form known to the server and ignore it
+# if not. "strict" like "permissive" but if the bind type is unknown the token
+# will be rejected. "required" any form of token binding is needed to be
+# allowed. Finally the name of a binding method that must be present in tokens.
+# (string value)
+#enforce_token_bind = permissive
+
+# DEPRECATED: If true, the revocation list will be checked for cached tokens.
+# This requires that PKI tokens are configured on the identity server. (boolean
+# value)
+# This option is deprecated for removal since Ocata.
+# Its value may be silently ignored in the future.
+# Reason: PKI token format is no longer supported.
+#check_revocations_for_cached = false
+
+# DEPRECATED: Hash algorithms to use for hashing PKI tokens. This may be a
+# single algorithm or multiple. The algorithms are those supported by Python
+# standard hashlib.new(). The hashes will be tried in the order given, so put
+# the preferred one first for performance. The result of the first hash will be
+# stored in the cache. This will typically be set to multiple values only while
+# migrating from a less secure algorithm to a more secure one. Once all the old
+# tokens are expired this option should be set to a single value for better
+# performance. (list value)
+# This option is deprecated for removal since Ocata.
+# Its value may be silently ignored in the future.
+# Reason: PKI token format is no longer supported.
+#hash_algorithms = md5
+
+# A choice of roles that must be present in a service token. Service tokens are
+# allowed to request that an expired token can be used and so this check should
+# tightly control that only actual services should be sending this token. Roles
+# here are applied as an ANY check so any role in this list must be present.
+# For backwards compatibility reasons this currently only affects the
+# allow_expired check. (list value)
+#service_token_roles = service
+
+# For backwards compatibility reasons we must let valid service tokens pass
+# that don't pass the service_token_roles check as valid. Setting this true
+# will become the default in a future release and should be enabled if
+# possible. (boolean value)
+#service_token_roles_required = false
+# Authentication type to load (string value)
+# Deprecated group/name - [keystone_authtoken]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Config Section from which to load plugin specific options (string value)
+#auth_section = <None>
+
+[matchmaker_redis]
+
+#
+# From oslo.messaging
+#
+
+# DEPRECATED: Host to locate redis. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#host = 127.0.0.1
+
+# DEPRECATED: Use this port to connect to redis host. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#port = 6379
+
+# DEPRECATED: Password for Redis server (optional). (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#password =
+
+# DEPRECATED: List of Redis Sentinel hosts (fault tolerance mode), e.g.,
+# [host:port, host1:port ... ] (list value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#sentinel_hosts =
+
+# Redis replica set name. (string value)
+#sentinel_group_name = oslo-messaging-zeromq
+
+# Time in ms to wait between connection attempts. (integer value)
+#wait_timeout = 2000
+
+# Time in ms to wait before the transaction is killed. (integer value)
+#check_timeout = 20000
+
+# Timeout in ms on blocking socket operations. (integer value)
+#socket_timeout = 10000
+
+[networking]
+
+#
+# From octavia
+#
+
+# Name of amphora internal network (string value)
+#lb_network_name = <None>
+
+# The maximum attempts to retry an action with the networking service. (integer
+# value)
+#max_retries = 15
+
+# Seconds to wait before retrying an action with the networking service.
+# (integer value)
+#retry_interval = 1
+
+# Seconds to wait for a port to detach from an amphora. (integer value)
+#port_detach_timeout = 300
+
+
+[neutron]
+
+#
+# From octavia
+#
+
+# The name of the neutron service in the keystone catalog (string value)
+#service_name = <None>
+
+# A new endpoint to override the endpoint in the keystone catalog. (string
+# value)
+#endpoint = <None>
+
+# Region in Identity service catalog to use for communication with the
+# OpenStack services. (string value)
+#region_name = <None>
+
+# Endpoint interface in identity service to use (string value)
+#endpoint_type = publicURL
+
+# CA certificates file path (string value)
+#ca_certificates_file = <None>
+
+# Disable certificate validation on SSL connections  (boolean value)
+#insecure = false
+
+[nova]
+
+#
+# From octavia
+#
+
+# The name of the nova service in the keystone catalog (string value)
+#service_name = <None>
+
+# A new endpoint to override the endpoint in the keystone catalog. (string
+# value)
+#endpoint = <None>
+
+# Region in Identity service catalog to use for communication with the
+# OpenStack services. (string value)
+#region_name = <None>
+
+# Endpoint interface in identity service to use (string value)
+#endpoint_type = publicURL
+
+# CA certificates file path (string value)
+#ca_certificates_file = <None>
+
+# Disable certificate validation on SSL connections  (boolean value)
+#insecure = false
+
+# Flag to indicate if nova anti-affinity feature is turned on. (boolean value)
+#enable_anti_affinity = false
+
+[oslo_messaging]
+
+#
+# From octavia
+#
+
+# (string value)
+#topic = <None>
+topic = octavia_prov
+
+# topic name for communicating events through a queue (string value)
+#event_stream_topic = neutron_lbaas_event
+
+[oslo_messaging_amqp]
+
+#
+# From oslo.messaging
+#
+
+# Name for the AMQP container. must be globally unique. Defaults to a generated
+# UUID (string value)
+# Deprecated group/name - [amqp1]/container_name
+#container_name = <None>
+
+# Timeout for inactive connections (in seconds) (integer value)
+# Deprecated group/name - [amqp1]/idle_timeout
+#idle_timeout = 0
+
+# Debug: dump AMQP frames to stdout (boolean value)
+# Deprecated group/name - [amqp1]/trace
+#trace = false
+
+# CA certificate PEM file used to verify the server's certificate (string
+# value)
+# Deprecated group/name - [amqp1]/ssl_ca_file
+#ssl_ca_file =
+
+# Self-identifying certificate PEM file for client authentication (string
+# value)
+# Deprecated group/name - [amqp1]/ssl_cert_file
+#ssl_cert_file =
+
+# Private key PEM file used to sign ssl_cert_file certificate (optional)
+# (string value)
+# Deprecated group/name - [amqp1]/ssl_key_file
+#ssl_key_file =
+
+# Password for decrypting ssl_key_file (if encrypted) (string value)
+# Deprecated group/name - [amqp1]/ssl_key_password
+#ssl_key_password = <None>
+
+# DEPRECATED: Accept clients using either SSL or plain TCP (boolean value)
+# Deprecated group/name - [amqp1]/allow_insecure_clients
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Not applicable - not a SSL server
+#allow_insecure_clients = false
+
+# Space separated list of acceptable SASL mechanisms (string value)
+# Deprecated group/name - [amqp1]/sasl_mechanisms
+#sasl_mechanisms =
+
+# Path to directory that contains the SASL configuration (string value)
+# Deprecated group/name - [amqp1]/sasl_config_dir
+#sasl_config_dir =
+
+# Name of configuration file (without .conf suffix) (string value)
+# Deprecated group/name - [amqp1]/sasl_config_name
+#sasl_config_name =
+
+# User name for message broker authentication (string value)
+# Deprecated group/name - [amqp1]/username
+#username =
+
+# Password for message broker authentication (string value)
+# Deprecated group/name - [amqp1]/password
+#password =
+
+# Seconds to pause before attempting to re-connect. (integer value)
+# Minimum value: 1
+#connection_retry_interval = 1
+
+# Increase the connection_retry_interval by this many seconds after each
+# unsuccessful failover attempt. (integer value)
+# Minimum value: 0
+#connection_retry_backoff = 2
+
+# Maximum limit for connection_retry_interval + connection_retry_backoff
+# (integer value)
+# Minimum value: 1
+#connection_retry_interval_max = 30
+
+# Time to pause between re-connecting an AMQP 1.0 link that failed due to a
+# recoverable error. (integer value)
+# Minimum value: 1
+#link_retry_delay = 10
+
+# The maximum number of attempts to re-send a reply message which failed due to
+# a recoverable error. (integer value)
+# Minimum value: -1
+#default_reply_retry = 0
+
+# The deadline for an rpc reply message delivery. (integer value)
+# Minimum value: 5
+#default_reply_timeout = 30
+
+# The deadline for an rpc cast or call message delivery. Only used when caller
+# does not provide a timeout expiry. (integer value)
+# Minimum value: 5
+#default_send_timeout = 30
+
+# The deadline for a sent notification message delivery. Only used when caller
+# does not provide a timeout expiry. (integer value)
+# Minimum value: 5
+#default_notify_timeout = 30
+
+# The duration to schedule a purge of idle sender links. Detach link after
+# expiry. (integer value)
+# Minimum value: 1
+#default_sender_link_timeout = 600
+
+# Indicates the addressing mode used by the driver.
+# Permitted values:
+# 'legacy'   - use legacy non-routable addressing
+# 'routable' - use routable addresses
+# 'dynamic'  - use legacy addresses if the message bus does not support routing
+# otherwise use routable addressing (string value)
+#addressing_mode = dynamic
+
+# address prefix used when sending to a specific server (string value)
+# Deprecated group/name - [amqp1]/server_request_prefix
+#server_request_prefix = exclusive
+
+# address prefix used when broadcasting to all servers (string value)
+# Deprecated group/name - [amqp1]/broadcast_prefix
+#broadcast_prefix = broadcast
+
+# address prefix when sending to any server in group (string value)
+# Deprecated group/name - [amqp1]/group_request_prefix
+#group_request_prefix = unicast
+
+# Address prefix for all generated RPC addresses (string value)
+#rpc_address_prefix = openstack.org/om/rpc
+
+# Address prefix for all generated Notification addresses (string value)
+#notify_address_prefix = openstack.org/om/notify
+
+# Appended to the address prefix when sending a fanout message. Used by the
+# message bus to identify fanout messages. (string value)
+#multicast_address = multicast
+
+# Appended to the address prefix when sending to a particular RPC/Notification
+# server. Used by the message bus to identify messages sent to a single
+# destination. (string value)
+#unicast_address = unicast
+
+# Appended to the address prefix when sending to a group of consumers. Used by
+# the message bus to identify messages that should be delivered in a round-
+# robin fashion across consumers. (string value)
+#anycast_address = anycast
+
+# Exchange name used in notification addresses.
+# Exchange name resolution precedence:
+# Target.exchange if set
+# else default_notification_exchange if set
+# else control_exchange if set
+# else 'notify' (string value)
+#default_notification_exchange = <None>
+
+# Exchange name used in RPC addresses.
+# Exchange name resolution precedence:
+# Target.exchange if set
+# else default_rpc_exchange if set
+# else control_exchange if set
+# else 'rpc' (string value)
+#default_rpc_exchange = <None>
+
+# Window size for incoming RPC Reply messages. (integer value)
+# Minimum value: 1
+#reply_link_credit = 200
+
+# Window size for incoming RPC Request messages (integer value)
+# Minimum value: 1
+#rpc_server_credit = 100
+
+# Window size for incoming Notification messages (integer value)
+# Minimum value: 1
+#notify_server_credit = 100
+
+# Send messages of this type pre-settled.
+# Pre-settled messages will not receive acknowledgement
+# from the peer. Note well: pre-settled messages may be
+# silently discarded if the delivery fails.
+# Permitted values:
+# 'rpc-call' - send RPC Calls pre-settled
+# 'rpc-reply'- send RPC Replies pre-settled
+# 'rpc-cast' - Send RPC Casts pre-settled
+# 'notify'   - Send Notifications pre-settled
+#  (multi valued)
+#pre_settled = rpc-cast
+#pre_settled = rpc-reply
+
+[oslo_messaging_kafka]
+
+#
+# From oslo.messaging
+#
+
+# DEPRECATED: Default Kafka broker Host (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#kafka_default_host = localhost
+
+# DEPRECATED: Default Kafka broker Port (port value)
+# Minimum value: 0
+# Maximum value: 65535
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#kafka_default_port = 9092
+
+# Max fetch bytes of Kafka consumer (integer value)
+#kafka_max_fetch_bytes = 1048576
+
+# Default timeout(s) for Kafka consumers (integer value)
+#kafka_consumer_timeout = 1.0
+
+# Pool Size for Kafka Consumers (integer value)
+#pool_size = 10
+
+# The pool size limit for connections expiration policy (integer value)
+#conn_pool_min_size = 2
+
+# The time-to-live in sec of idle connections in the pool (integer value)
+#conn_pool_ttl = 1200
+
+# Group id for Kafka consumer. Consumers in one group will coordinate message
+# consumption (string value)
+#consumer_group = oslo_messaging_consumer
+
+# Upper bound on the delay for KafkaProducer batching in seconds (floating
+# point value)
+#producer_batch_timeout = 0.0
+
+# Size of batch for the producer async send (integer value)
+#producer_batch_size = 16384
+
+
+[oslo_messaging_notifications]
+
+#
+# From oslo.messaging
+#
+
+# The Drivers(s) to handle sending notifications. Possible values are
+# messaging, messagingv2, routing, log, test, noop (multi valued)
+# Deprecated group/name - [DEFAULT]/notification_driver
+#driver =
+
+# A URL representing the messaging driver to use for notifications. If not set,
+# we fall back to the same configuration used for RPC. (string value)
+# Deprecated group/name - [DEFAULT]/notification_transport_url
+#transport_url = <None>
+
+# AMQP topic used for OpenStack notifications. (list value)
+# Deprecated group/name - [rpc_notifier2]/topics
+# Deprecated group/name - [DEFAULT]/notification_topics
+#topics = notifications
+
+
+[oslo_messaging_rabbit]
+
+#
+# From oslo.messaging
+#
+
+# Use durable queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/amqp_durable_queues
+# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
+#amqp_durable_queues = false
+
+# Auto-delete queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/amqp_auto_delete
+#amqp_auto_delete = false
+
+# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
+# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
+# distributions. (string value)
+# Deprecated group/name - [DEFAULT]/kombu_ssl_version
+#kombu_ssl_version =
+
+# SSL key file (valid only if SSL enabled). (string value)
+# Deprecated group/name - [DEFAULT]/kombu_ssl_keyfile
+#kombu_ssl_keyfile =
+
+# SSL cert file (valid only if SSL enabled). (string value)
+# Deprecated group/name - [DEFAULT]/kombu_ssl_certfile
+#kombu_ssl_certfile =
+
+# SSL certification authority file (valid only if SSL enabled). (string value)
+# Deprecated group/name - [DEFAULT]/kombu_ssl_ca_certs
+#kombu_ssl_ca_certs =
+
+# How long to wait before reconnecting in response to an AMQP consumer cancel
+# notification. (floating point value)
+# Deprecated group/name - [DEFAULT]/kombu_reconnect_delay
+#kombu_reconnect_delay = 1.0
+
+# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not
+# be used. This option may not be available in future versions. (string value)
+#kombu_compression = <None>
+
+# How long to wait a missing client before abandoning to send it its replies.
+# This value should not be longer than rpc_response_timeout. (integer value)
+# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
+#kombu_missing_consumer_retry_timeout = 60
+
+# Determines how the next RabbitMQ node is chosen in case the one we are
+# currently connected to becomes unavailable. Takes effect only if more than
+# one RabbitMQ node is provided in config. (string value)
+# Allowed values: round-robin, shuffle
+#kombu_failover_strategy = round-robin
+
+# DEPRECATED: The RabbitMQ broker address where a single node is used. (string
+# value)
+# Deprecated group/name - [DEFAULT]/rabbit_host
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_host = localhost
+
+# DEPRECATED: The RabbitMQ broker port where a single node is used. (port
+# value)
+# Minimum value: 0
+# Maximum value: 65535
+# Deprecated group/name - [DEFAULT]/rabbit_port
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_port = 5672
+
+# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
+# Deprecated group/name - [DEFAULT]/rabbit_hosts
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_hosts = $rabbit_host:$rabbit_port
+
+# Connect over SSL for RabbitMQ. (boolean value)
+# Deprecated group/name - [DEFAULT]/rabbit_use_ssl
+#rabbit_use_ssl = false
+
+# DEPRECATED: The RabbitMQ userid. (string value)
+# Deprecated group/name - [DEFAULT]/rabbit_userid
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_userid = guest
+
+# DEPRECATED: The RabbitMQ password. (string value)
+# Deprecated group/name - [DEFAULT]/rabbit_password
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_password = guest
+
+# The RabbitMQ login method. (string value)
+# Allowed values: PLAIN, AMQPLAIN, RABBIT-CR-DEMO
+# Deprecated group/name - [DEFAULT]/rabbit_login_method
+#rabbit_login_method = AMQPLAIN
+
+# DEPRECATED: The RabbitMQ virtual host. (string value)
+# Deprecated group/name - [DEFAULT]/rabbit_virtual_host
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_virtual_host = /
+
+# How frequently to retry connecting with RabbitMQ. (integer value)
+#rabbit_retry_interval = 1
+
+# How long to backoff for between retries when connecting to RabbitMQ. (integer
+# value)
+# Deprecated group/name - [DEFAULT]/rabbit_retry_backoff
+#rabbit_retry_backoff = 2
+
+# Maximum interval of RabbitMQ connection retries. Default is 30 seconds.
+# (integer value)
+#rabbit_interval_max = 30
+
+# DEPRECATED: Maximum number of RabbitMQ connection retries. Default is 0
+# (infinite retry count). (integer value)
+# Deprecated group/name - [DEFAULT]/rabbit_max_retries
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#rabbit_max_retries = 0
+
+# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this
+# option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring
+# is no longer controlled by the x-ha-policy argument when declaring a queue.
+# If you just want to make sure that all queues (except those with auto-
+# generated names) are mirrored across all nodes, run: "rabbitmqctl set_policy
+# HA '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value)
+# Deprecated group/name - [DEFAULT]/rabbit_ha_queues
+#rabbit_ha_queues = false
+
+# Positive integer representing duration in seconds for queue TTL (x-expires).
+# Queues which are unused for the duration of the TTL are automatically
+# deleted. The parameter affects only reply and fanout queues. (integer value)
+# Minimum value: 1
+#rabbit_transient_queues_ttl = 1800
+
+# Specifies the number of messages to prefetch. Setting to zero allows
+# unlimited messages. (integer value)
+#rabbit_qos_prefetch_count = 0
+
+# Number of seconds after which the Rabbit broker is considered down if
+# heartbeat's keep-alive fails (0 disable the heartbeat). EXPERIMENTAL (integer
+# value)
+#heartbeat_timeout_threshold = 60
+
+# How often times during the heartbeat_timeout_threshold we check the
+# heartbeat. (integer value)
+#heartbeat_rate = 2
+
+# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake (boolean value)
+# Deprecated group/name - [DEFAULT]/fake_rabbit
+#fake_rabbit = false
+
+# Maximum number of channels to allow (integer value)
+#channel_max = <None>
+
+# The maximum byte size for an AMQP frame (integer value)
+#frame_max = <None>
+
+# How often to send heartbeats for consumer's connections (integer value)
+#heartbeat_interval = 3
+
+# Enable SSL (boolean value)
+#ssl = <None>
+
+# Arguments passed to ssl.wrap_socket (dict value)
+#ssl_options = <None>
+
+# Set socket timeout in seconds for connection's socket (floating point value)
+#socket_timeout = 0.25
+
+# Set TCP_USER_TIMEOUT in seconds for connection's socket (floating point
+# value)
+#tcp_user_timeout = 0.25
+
+# Set delay for reconnection to some host which has connection error (floating
+# point value)
+#host_connection_reconnect_delay = 0.25
+
+# Connection factory implementation (string value)
+# Allowed values: new, single, read_write
+#connection_factory = single
+
+# Maximum number of connections to keep queued. (integer value)
+#pool_max_size = 30
+
+# Maximum number of connections to create above `pool_max_size`. (integer
+# value)
+#pool_max_overflow = 0
+
+# Default number of seconds to wait for a connections to available (integer
+# value)
+#pool_timeout = 30
+
+# Lifetime of a connection (since creation) in seconds or None for no
+# recycling. Expired connections are closed on acquire. (integer value)
+#pool_recycle = 600
+
+# Threshold at which inactive (since release) connections are considered stale
+# in seconds or None for no staleness. Stale connections are closed on acquire.
+# (integer value)
+#pool_stale = 60
+
+# Default serialization mechanism for serializing/deserializing
+# outgoing/incoming messages (string value)
+# Allowed values: json, msgpack
+#default_serializer_type = json
+
+# Persist notification messages. (boolean value)
+#notification_persistence = false
+
+# Exchange name for sending notifications (string value)
+#default_notification_exchange = ${control_exchange}_notification
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# notification listener. (integer value)
+#notification_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during sending
+# notification, -1 means infinite retry. (integer value)
+#default_notification_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during sending
+# notification message (floating point value)
+#notification_retry_delay = 0.25
+
+# Time to live for rpc queues without consumers in seconds. (integer value)
+#rpc_queue_expiration = 60
+
+# Exchange name for sending RPC messages (string value)
+#default_rpc_exchange = ${control_exchange}_rpc
+
+# Exchange name for receiving RPC replies (string value)
+#rpc_reply_exchange = ${control_exchange}_rpc_reply
+
+# Max number of not acknowledged message which RabbitMQ can send to rpc
+# listener. (integer value)
+#rpc_listener_prefetch_count = 100
+
+# Max number of not acknowledged message which RabbitMQ can send to rpc reply
+# listener. (integer value)
+#rpc_reply_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during sending
+# reply. -1 means infinite retry during rpc_timeout (integer value)
+#rpc_reply_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during sending
+# reply. (floating point value)
+#rpc_reply_retry_delay = 0.25
+
+# Reconnecting retry count in case of connectivity problem during sending RPC
+# message, -1 means infinite retry. If actual retry attempts in not 0 the rpc
+# request could be processed more than one time (integer value)
+#default_rpc_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during sending RPC
+# message (floating point value)
+#rpc_retry_delay = 0.25
+
+
+[oslo_messaging_zmq]
+
+#
+# From oslo.messaging
+#
+
+# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
+# The "host" option should point or resolve to this address. (string value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_bind_address
+#rpc_zmq_bind_address = *
+
+# MatchMaker driver. (string value)
+# Allowed values: redis, sentinel, dummy
+# Deprecated group/name - [DEFAULT]/rpc_zmq_matchmaker
+#rpc_zmq_matchmaker = redis
+
+# Number of ZeroMQ contexts, defaults to 1. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_contexts
+#rpc_zmq_contexts = 1
+
+# Maximum number of ingress messages to locally buffer per topic. Default is
+# unlimited. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_topic_backlog
+#rpc_zmq_topic_backlog = <None>
+
+# Directory for holding IPC sockets. (string value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_ipc_dir
+#rpc_zmq_ipc_dir = /var/run/openstack
+
+# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
+# "host" option, if running Nova. (string value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_host
+#rpc_zmq_host = localhost
+
+# Number of seconds to wait before all pending messages will be sent after
+# closing a socket. The default value of -1 specifies an infinite linger
+# period. The value of 0 specifies no linger period. Pending messages shall be
+# discarded immediately when the socket is closed. Positive values specify an
+# upper bound for the linger period. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
+#zmq_linger = -1
+
+# The default number of seconds that poll should wait. Poll raises timeout
+# exception when timeout expired. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_poll_timeout
+#rpc_poll_timeout = 1
+
+# Expiration timeout in seconds of a name service record about existing target
+# ( < 0 means no timeout). (integer value)
+# Deprecated group/name - [DEFAULT]/zmq_target_expire
+#zmq_target_expire = 300
+
+# Update period in seconds of a name service record about existing target.
+# (integer value)
+# Deprecated group/name - [DEFAULT]/zmq_target_update
+#zmq_target_update = 180
+
+# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
+# value)
+# Deprecated group/name - [DEFAULT]/use_pub_sub
+#use_pub_sub = false
+
+# Use ROUTER remote proxy. (boolean value)
+# Deprecated group/name - [DEFAULT]/use_router_proxy
+#use_router_proxy = false
+
+# This option makes direct connections dynamic or static. It makes sense only
+# with use_router_proxy=False which means to use direct connections for direct
+# message types (ignored otherwise). (boolean value)
+#use_dynamic_connections = false
+
+# How many additional connections to a host will be made for failover reasons.
+# This option is actual only in dynamic connections mode. (integer value)
+#zmq_failover_connections = 2
+
+# Minimal port number for random ports range. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+# Deprecated group/name - [DEFAULT]/rpc_zmq_min_port
+#rpc_zmq_min_port = 49153
+
+# Maximal port number for random ports range. (integer value)
+# Minimum value: 1
+# Maximum value: 65536
+# Deprecated group/name - [DEFAULT]/rpc_zmq_max_port
+#rpc_zmq_max_port = 65536
+
+# Number of retries to find free port number before fail with ZMQBindError.
+# (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_bind_port_retries
+#rpc_zmq_bind_port_retries = 100
+
+# Default serialization mechanism for serializing/deserializing
+# outgoing/incoming messages (string value)
+# Allowed values: json, msgpack
+# Deprecated group/name - [DEFAULT]/rpc_zmq_serialization
+#rpc_zmq_serialization = json
+
+# This option configures round-robin mode in zmq socket. True means not keeping
+# a queue when server side disconnects. False means to keep queue and messages
+# even if server is disconnected, when the server appears we send all
+# accumulated messages to it. (boolean value)
+#zmq_immediate = true
+
+# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
+# other negative value) means to skip any overrides and leave it to OS default;
+# 0 and 1 (or any other positive value) mean to disable and enable the option
+# respectively. (integer value)
+#zmq_tcp_keepalive = -1
+
+# The duration between two keepalive transmissions in idle condition. The unit
+# is platform dependent, for example, seconds in Linux, milliseconds in Windows
+# etc. The default value of -1 (or any other negative value and 0) means to
+# skip any overrides and leave it to OS default. (integer value)
+#zmq_tcp_keepalive_idle = -1
+
+# The number of retransmissions to be carried out before declaring that remote
+# end is not available. The default value of -1 (or any other negative value
+# and 0) means to skip any overrides and leave it to OS default. (integer
+# value)
+#zmq_tcp_keepalive_cnt = -1
+
+# The duration between two successive keepalive retransmissions, if
+# acknowledgement to the previous keepalive transmission is not received. The
+# unit is platform dependent, for example, seconds in Linux, milliseconds in
+# Windows etc. The default value of -1 (or any other negative value and 0)
+# means to skip any overrides and leave it to OS default. (integer value)
+#zmq_tcp_keepalive_intvl = -1
+
+# Maximum number of (green) threads to work concurrently. (integer value)
+#rpc_thread_pool_size = 100
+
+# Expiration timeout in seconds of a sent/received message after which it is
+# not tracked anymore by a client/server. (integer value)
+#rpc_message_ttl = 300
+
+# Wait for message acknowledgements from receivers. This mechanism works only
+# via proxy without PUB/SUB. (boolean value)
+#rpc_use_acks = false
+
+# Number of seconds to wait for an ack from a cast/call. After each retry
+# attempt this timeout is multiplied by some specified multiplier. (integer
+# value)
+#rpc_ack_timeout_base = 15
+
+# Number to multiply base ack timeout by after each retry attempt. (integer
+# value)
+#rpc_ack_timeout_multiplier = 2
+
+# Default number of message sending attempts in case of any problems occurred:
+# positive value N means at most N retries, 0 means no retries, None or -1 (or
+# any other negative values) mean to retry forever. This option is used only if
+# acknowledgments are enabled. (integer value)
+#rpc_retry_attempts = 3
+
+# List of publisher hosts SubConsumer can subscribe on. This option has higher
+# priority then the default publishers list taken from the matchmaker. (list
+# value)
+#subscribe_on =
+
+[oslo_policy]
+
+#
+# From oslo.policy
+#
+
+# The file that defines policies. (string value)
+# Deprecated group/name - [DEFAULT]/policy_file
+#policy_file = policy.json
+
+# Default rule. Enforced when a requested rule is not found. (string value)
+# Deprecated group/name - [DEFAULT]/policy_default_rule
+#policy_default_rule = default
+
+# Directories where policy configuration files are stored. They can be relative
+# to any directory in the search path defined by the config_dir option, or
+# absolute paths. The file defined by policy_file must exist for these
+# directories to be searched.  Missing or empty directories are ignored. (multi
+# valued)
+# Deprecated group/name - [DEFAULT]/policy_dirs
+#policy_dirs = policy.d
+
+[service_auth]
+
+#
+# From octavia
+#
+
+# Authentication URL (string value)
+#auth_url = <None>
+auth_url=http://{{ server.identity.host }}:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [service_auth]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# (string value)
+#cafile = <None>
+cafile =
+
+# PEM encoded client certificate cert file (string value)
+#certfile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used
+# for both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# PEM encoded client certificate key file (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = {{ server.identity.password }}
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = {{ server.identity.get('domain', 'default') }}
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+# Deprecated group/name - [service_auth]/tenant-id
+#project_id = <None>
+
+# Project name to scope to (string value)
+# Deprecated group/name - [service_auth]/tenant-name
+#project_name = <None>
+project_name = {{ server.identity.tenant }}
+
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+user_domain_id = {{ server.identity.get('domain', 'default') }}
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
+# User id (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [service_auth]/user-name
+#username = <None>
+username = {{ server.identity.user }}
+
+
+[task_flow]
+
+#
+# From octavia
+#
+
+# TaskFlow engine to use (string value)
+#engine = serial
+
+# The maximum number of workers (integer value)
+#max_workers = 5
diff --git a/octavia/files/octavia.conf b/octavia/files/octavia.conf
deleted file mode 100644
index 44e3449..0000000
--- a/octavia/files/octavia.conf
+++ /dev/null
@@ -1 +0,0 @@
-# Service config file
\ No newline at end of file