Merge "Fix for differentiating no data vs 0s"
diff --git a/.kitchen.yml b/.kitchen.yml
new file mode 100644
index 0000000..8b89e35
--- /dev/null
+++ b/.kitchen.yml
@@ -0,0 +1,107 @@
+---
+driver:
+ name: docker
+ hostname: neutron.ci.local
+ use_sudo: false
+
+provisioner:
+ name: salt_solo
+ salt_install: bootstrap
+ salt_bootstrap_url: https://bootstrap.saltstack.com
+ salt_version: latest
+ require_chef: false
+ log_level: error
+ formula: neutron
+ grains:
+ noservices: True
+ vendor_repo:
+ - type: apt
+ url: http://apt-mk.mirantis.com/trusty
+ key_url: http://apt-mk.mirantis.com/public.gpg
+ components: oc303 extra
+ distribution: nightly
+ dependencies:
+ - name: linux
+ repo: git
+ source: https://github.com/salt-formulas/salt-formula-linux
+ state_top:
+ base:
+ "*":
+ - linux.system
+ - neutron
+ pillars:
+ top.sls:
+ base:
+ "*":
+ - linux_repo_openstack
+ - neutron
+ pillars-from-files:
+ linux_repo_openstack.sls: tests/pillar/repo_mos9.sls
+
+verifier:
+ name: inspec
+ sudo: true
+
+platforms:
+ - name: <%=ENV['PLATFORM'] || 'ubuntu-xenial'%>
+ driver_config:
+ image: <%=ENV['PLATFORM'] || 'trevorj/salty-whales:xenial'%>
+ platform: ubuntu
+
+suites:
+
+ - name: compute_dpdk
+ provisioner:
+ pillars-from-files:
+ neutron.sls: tests/pillar/compute_dpdk.sls
+
+ - name: compute_dvr
+ provisioner:
+ pillars-from-files:
+ neutron.sls: tests/pillar/compute_dvr.sls
+
+ - name: compute_legacy
+ provisioner:
+ pillars-from-files:
+ neutron.sls: tests/pillar/compute_legacy.sls
+
+ - name: compute_nonexternal_dvr
+ provisioner:
+ pillars-from-files:
+ neutron.sls: tests/pillar/compute_nonexternal_dvr.sls
+
+ - name: compute_sriov
+ provisioner:
+ pillars-from-files:
+ neutron.sls: tests/pillar/compute_sriov.sls
+
+ - name: control_cluster
+ provisioner:
+ pillars-from-files:
+ neutron.sls: tests/pillar/control_cluster.sls
+
+ - name: control_dvr
+ provisioner:
+ pillars-from-files:
+ neutron.sls: tests/pillar/control_dvr.sls
+
+ - name: control_nodvr
+ provisioner:
+ pillars-from-files:
+ neutron.sls: tests/pillar/control_nodvr.sls
+
+ - name: control_single
+ provisioner:
+ pillars-from-files:
+ neutron.sls: tests/pillar/control_single.sls
+
+ - name: gateway_dvr
+ provisioner:
+ pillars-from-files:
+ neutron.sls: tests/pillar/gateway_dvr.sls
+
+ - name: gateway_legacy
+ provisioner:
+ pillars-from-files:
+ neutron.sls: tests/pillar/gateway_legacy.sls
+# vim: ft=yaml sw=2 ts=2 sts=2 tw=125
diff --git a/.travis.yml b/.travis.yml
new file mode 100644
index 0000000..7a77247
--- /dev/null
+++ b/.travis.yml
@@ -0,0 +1,39 @@
+sudo: required
+services:
+ - docker
+
+install:
+ - pip install PyYAML
+ - pip install virtualenv
+ - |
+ test -e Gemfile || cat <<EOF > Gemfile
+ source 'https://rubygems.org'
+ gem 'rake'
+ gem 'test-kitchen'
+ gem 'kitchen-docker'
+ gem 'kitchen-inspec'
+ gem 'inspec'
+ gem 'kitchen-salt', :git => 'https://github.com/salt-formulas/kitchen-salt.git'
+ - bundle install
+
+env:
+ - PLATFORM=trevorj/salty-whales:trusty
+ - PLATFORM=trevorj/salty-whales:xenial
+
+before_script:
+ - set -o pipefail
+ - make test | tail
+
+script:
+ - test ! -e .kitchen.yml || bundle exec kitchen test -t tests/integration
+
+notifications:
+ webhooks:
+ urls:
+ - https://webhooks.gitter.im/e/6123573504759330786b
+ on_success: change # options: [always|never|change] default: always
+ on_failure: never # options: [always|never|change] default: always
+ on_start: never # options: [always|never|change] default: always
+ on_cancel: never # options: [always|never|change] default: always
+ on_error: never # options: [always|never|change] default: always
+ email: false
diff --git a/README.rst b/README.rst
index 9b98a4d..4f0cbbd 100644
--- a/README.rst
+++ b/README.rst
@@ -1,6 +1,6 @@
-=======================
-Neutron Network Service
-=======================
+===============
+Neutron Formula
+===============
Neutron is an OpenStack project to provide "networking as a service" between
interface devices (e.g., vNICs) managed by other Openstack services (e.g.,
@@ -10,7 +10,7 @@
OpenStack platform (for Essex, we were an "incubated" project, which means use
is suggested only for those who really know what they're doing with Neutron).
-Sample pillars
+Sample Pillars
==============
Neutron Server on the controller node
@@ -79,7 +79,8 @@
engine: avinetworks
...
-Note: If you want contrail lbaas then backend is only required. Lbaas in pillar should be define only if it should be disabled.
+Note: If you want contrail lbaas then backend is only required. Lbaas in
+pillar should be define only if it should be disabled.
.. code-block:: yaml
@@ -88,22 +89,20 @@
lbaas:
enabled: disabled
+Neutron VXLAN tenant networks with Network nodes
+------------------------------------------------
-Neutron VXLAN tenant networks with Network Nodes (with DVR for East-West
- and Network node for North-South)
-=========================================================================
-===================================
+With DVR for East-West and Network node for North-South.
This use case describes a model utilising VxLAN overlay with DVR. The DVR
- routers will only be utilized for traffic that is router within the cloud
- infrastructure and that remains encapsulated. External traffic will be
- routed to via the network nodes.
+routers will only be utilized for traffic that is router within the cloud
+infrastructure and that remains encapsulated. External traffic will be
+routed to via the network nodes.
The intention is that each tenant will require at least two (2) vrouters
one to be utilised
-Neutron Server only
--------------------
+Neutron Server
.. code-block:: yaml
@@ -147,8 +146,7 @@
ovs:
driver: openvswitch
-Network Node only
------------------
+Network Node
.. code-block:: yaml
@@ -177,7 +175,6 @@
driver: openvswitch
Compute Node
--------------
.. code-block:: yaml
@@ -208,14 +205,14 @@
audit:
enabled: false
+
Neutron VXLAN tenant networks with Network Nodes (non DVR)
-==========================================================
+----------------------------------------------------------
This section describes a network solution that utilises VxLAN overlay
networks without DVR with all routers being managed on the network nodes.
-Neutron Server only
--------------------
+Neutron Server
.. code-block:: yaml
@@ -259,8 +256,7 @@
ovs:
driver: openvswitch
-Network Node only
------------------
+Network Node
.. code-block:: yaml
@@ -278,6 +274,7 @@
local_ip: 192.168.20.20 # br-mesh ip address
dvr: False
agent_mode: legacy
+ availability_zone: az1
metadata:
host: 127.0.0.1
password: pass
@@ -289,7 +286,6 @@
driver: openvswitch
Compute Node
--------------
.. code-block:: yaml
@@ -314,17 +310,16 @@
ovs:
driver: openvswitch
-Neutron VXLAN tenant networks with Network Nodes (with DVR for
-East-West and North-South, DVR everywhere, Network node for SNAT)
-==============================================================
-========================================================
+Neutron VXLAN tenant networks with Network Nodes with DVR
+---------------------------------------------------------
+
+With DVR for East-West and North-South, DVR everywhere, Network node for SNAT.
This section describes a network solution that utilises VxLAN
overlay networks with DVR with North-South and East-West. Network
Node is used only for SNAT.
-Neutron Server only
--------------------
+Neutron Server
.. code-block:: yaml
@@ -368,8 +363,7 @@
ovs:
driver: openvswitch
-Network Node only
------------------
+Network Node
.. code-block:: yaml
@@ -387,6 +381,7 @@
local_ip: 192.168.20.20 # br-mesh ip address
dvr: True
agent_mode: dvr_snat
+ availability_zone: az1
metadata:
host: 127.0.0.1
password: pass
@@ -398,7 +393,6 @@
driver: openvswitch
Compute Node
--------------
.. code-block:: yaml
@@ -417,6 +411,7 @@
dvr: True
external_access: True
agent_mode: dvr
+ availability_zone: az1
metadata:
host: 127.0.0.1
password: pass
@@ -428,7 +423,6 @@
driver: openvswitch
Sample Linux network configuration for DVR
---------------------------------------------
.. code-block:: yaml
@@ -492,12 +486,11 @@
- float-to-ex
Neutron VLAN tenant networks with Network Nodes
-===============================================
+-----------------------------------------------
VLAN tenant provider
Neutron Server only
--------------------
.. code-block:: yaml
@@ -520,7 +513,6 @@
driver: openvswitch
Compute node
--------------------
.. code-block:: yaml
@@ -539,8 +531,9 @@
ovs:
driver: openvswitch
+Advanced Neutron Features (DPDK, SR-IOV)
+
Neutron OVS DPDK
-==================
Enable datapath netdev for neutron openvswitch agent
@@ -566,7 +559,6 @@
driver: openvswitch
Neutron OVS SR-IOV
-==================
.. code-block:: yaml
@@ -599,8 +591,10 @@
ovs:
driver: openvswitch
+Neutron Server
+--------------
+
Neutron Server with OpenContrail
-==================================
.. code-block:: yaml
@@ -617,7 +611,6 @@
token: token
Neutron Server with Midonet
-===========================
.. code-block:: yaml
@@ -630,8 +623,6 @@
user: admin
password: password
-Other
-=====
Neutron Keystone region
@@ -649,7 +640,6 @@
region: RegionTwo
...
-
Client-side RabbitMQ HA setup
.. code-block:: yaml
@@ -689,8 +679,8 @@
....
-Client role
------------
+Neutron Client
+--------------
Neutron networks
@@ -731,7 +721,6 @@
network:
...
-
Neutron routers
.. code-block:: yaml
@@ -817,41 +806,6 @@
Instance port in the stated subnet will be associated with the dynamically generated floating IP.
-Usage
-=====
-
-Fix RDO Neutron installation
-
-.. code-block:: yaml
-
- neutron-db-manage --config-file /usr/share/neutron/neutron-dist.conf --config-file /etc/neutron/neutron.conf --config-file /etc/neutron/plugin.ini stamp havana
-
-Documentation and Bugs
-============================
-
-To learn how to deploy OpenStack Salt, consult the documentation available
-online at:
-
- https://wiki.openstack.org/wiki/OpenStackSalt
-
-In the unfortunate event that bugs are discovered, they should be reported to
-the appropriate bug tracker. If you obtained the software from a 3rd party
-operating system vendor, it is often wise to use their own bug tracker for
-reporting problems. In all other cases use the master OpenStack bug tracker,
-available at:
-
- http://bugs.launchpad.net/openstack-salt
-
-Developers wishing to work on the OpenStack Salt project should always base
-their work on the latest formulas code, available from the master GIT
-repository at:
-
- https://git.openstack.org/cgit/openstack/salt-formula-neutron
-
-Developers should also join the discussion on the IRC list, at:
-
- https://wiki.openstack.org/wiki/Meetings/openstack-salt
-
Documentation and Bugs
======================
diff --git a/neutron/compute.sls b/neutron/compute.sls
index e67eac5..bd6e3e0 100644
--- a/neutron/compute.sls
+++ b/neutron/compute.sls
@@ -38,6 +38,7 @@
- file: /etc/neutron/neutron.conf
- file: /etc/neutron/plugins/ml2/openvswitch_agent.ini
- file: /etc/neutron/plugins/ml2/sriov_agent.ini
+ - unless: grains.get('noservices', False)
{% endif %}
@@ -84,4 +85,4 @@
- file: /etc/neutron/neutron.conf
- file: /etc/neutron/plugins/ml2/openvswitch_agent.ini
-{%- endif %}
\ No newline at end of file
+{%- endif %}
diff --git a/neutron/files/mitaka/neutron-generic.conf.Debian b/neutron/files/mitaka/neutron-generic.conf.Debian
index d746ac2..0741f47 100644
--- a/neutron/files/mitaka/neutron-generic.conf.Debian
+++ b/neutron/files/mitaka/neutron-generic.conf.Debian
@@ -610,7 +610,7 @@
#check_child_processes_interval = 60
# Availability zone of this node (string value)
-#availability_zone = nova
+availability_zone = {{ neutron.availability_zone|default('nova') }}
[cors]
diff --git a/neutron/files/newton/ContrailPlugin.ini b/neutron/files/newton/ContrailPlugin.ini
new file mode 100644
index 0000000..2817f52
--- /dev/null
+++ b/neutron/files/newton/ContrailPlugin.ini
@@ -0,0 +1,13 @@
+{% from "neutron/map.jinja" import server with context %}
+[APISERVER]
+api_server_ip = {{ server.backend.host }}
+api_server_port = 8082
+multi_tenancy = True
+contrail_extensions = ipam:neutron_plugin_contrail.plugins.opencontrail.contrail_plugin_ipam.NeutronPluginContrailIpam,policy:neutron_plugin_contrail.plugins.opencontrail.contrail_plugin_policy.NeutronPluginContrailPolicy,route-table:neutron_plugin_contrail.plugins.opencontrail.contrail_plugin_vpc.NeutronPluginContrailVpc,contrail:None
+
+[KEYSTONE]
+auth_url = http://{{ server.identity.host }}:35357/v2.0
+admin_token = {{ server.backend.token }}
+admin_user={{ server.backend.user }}
+admin_password={{ server.backend.password }}
+admin_tenant_name={{ server.backend.tenant }}
\ No newline at end of file
diff --git a/neutron/files/newton/api-paste.ini.Debian b/neutron/files/newton/api-paste.ini.Debian
new file mode 100644
index 0000000..580ee6f
--- /dev/null
+++ b/neutron/files/newton/api-paste.ini.Debian
@@ -0,0 +1,52 @@
+{%- from "neutron/map.jinja" import server with context %}
+[composite:neutron]
+use = egg:Paste#urlmap
+/: neutronversions_composite
+/v2.0: neutronapi_v2_0
+
+[composite:neutronapi_v2_0]
+use = call:neutron.auth:pipeline_factory
+noauth = cors http_proxy_to_wsgi request_id catch_errors extensions neutronapiapp_v2_0
+keystone = cors http_proxy_to_wsgi request_id catch_errors authtoken keystonecontext extensions {% if server.audit.enabled %}audit {% endif %}neutronapiapp_v2_0
+
+[composite:neutronversions_composite]
+use = call:neutron.auth:pipeline_factory
+noauth = cors http_proxy_to_wsgi neutronversions
+keystone = cors http_proxy_to_wsgi {% if server.audit.enabled %}audit {% endif %}neutronversions
+
+[filter:request_id]
+paste.filter_factory = oslo_middleware:RequestId.factory
+
+[filter:catch_errors]
+paste.filter_factory = oslo_middleware:CatchErrors.factory
+
+[filter:cors]
+paste.filter_factory = oslo_middleware.cors:filter_factory
+oslo_config_project = neutron
+
+[filter:http_proxy_to_wsgi]
+paste.filter_factory = oslo_middleware.http_proxy_to_wsgi:HTTPProxyToWSGI.factory
+
+[filter:keystonecontext]
+paste.filter_factory = neutron.auth:NeutronKeystoneContext.factory
+
+[filter:authtoken]
+paste.filter_factory = keystonemiddleware.auth_token:filter_factory
+
+[filter:extensions]
+paste.filter_factory = neutron.api.extensions:plugin_aware_extension_middleware_factory
+
+[app:neutronversions]
+paste.app_factory = neutron.api.versions:Versions.factory
+
+[app:neutronapiapp_v2_0]
+paste.app_factory = neutron.api.v2.router:APIRouter.factory
+
+{%- if server.audit.enabled %}
+[filter:audit]
+paste.filter_factory = {{ server.get("audit", {}).get("filter_factory", "keystonemiddleware.audit:filter_factory") }}
+audit_map_file = {{ server.get("audit", {}).get("map_file", "/etc/pycadf/neutron_api_audit_map.conf") }}
+{%- endif %}
+
+[filter:osprofiler]
+paste.filter_factory = osprofiler.web:WsgiMiddleware.factory
diff --git a/neutron/files/newton/api-paste.ini.RedHat b/neutron/files/newton/api-paste.ini.RedHat
new file mode 100644
index 0000000..580ee6f
--- /dev/null
+++ b/neutron/files/newton/api-paste.ini.RedHat
@@ -0,0 +1,52 @@
+{%- from "neutron/map.jinja" import server with context %}
+[composite:neutron]
+use = egg:Paste#urlmap
+/: neutronversions_composite
+/v2.0: neutronapi_v2_0
+
+[composite:neutronapi_v2_0]
+use = call:neutron.auth:pipeline_factory
+noauth = cors http_proxy_to_wsgi request_id catch_errors extensions neutronapiapp_v2_0
+keystone = cors http_proxy_to_wsgi request_id catch_errors authtoken keystonecontext extensions {% if server.audit.enabled %}audit {% endif %}neutronapiapp_v2_0
+
+[composite:neutronversions_composite]
+use = call:neutron.auth:pipeline_factory
+noauth = cors http_proxy_to_wsgi neutronversions
+keystone = cors http_proxy_to_wsgi {% if server.audit.enabled %}audit {% endif %}neutronversions
+
+[filter:request_id]
+paste.filter_factory = oslo_middleware:RequestId.factory
+
+[filter:catch_errors]
+paste.filter_factory = oslo_middleware:CatchErrors.factory
+
+[filter:cors]
+paste.filter_factory = oslo_middleware.cors:filter_factory
+oslo_config_project = neutron
+
+[filter:http_proxy_to_wsgi]
+paste.filter_factory = oslo_middleware.http_proxy_to_wsgi:HTTPProxyToWSGI.factory
+
+[filter:keystonecontext]
+paste.filter_factory = neutron.auth:NeutronKeystoneContext.factory
+
+[filter:authtoken]
+paste.filter_factory = keystonemiddleware.auth_token:filter_factory
+
+[filter:extensions]
+paste.filter_factory = neutron.api.extensions:plugin_aware_extension_middleware_factory
+
+[app:neutronversions]
+paste.app_factory = neutron.api.versions:Versions.factory
+
+[app:neutronapiapp_v2_0]
+paste.app_factory = neutron.api.v2.router:APIRouter.factory
+
+{%- if server.audit.enabled %}
+[filter:audit]
+paste.filter_factory = {{ server.get("audit", {}).get("filter_factory", "keystonemiddleware.audit:filter_factory") }}
+audit_map_file = {{ server.get("audit", {}).get("map_file", "/etc/pycadf/neutron_api_audit_map.conf") }}
+{%- endif %}
+
+[filter:osprofiler]
+paste.filter_factory = osprofiler.web:WsgiMiddleware.factory
diff --git a/neutron/files/newton/dhcp_agent.ini b/neutron/files/newton/dhcp_agent.ini
new file mode 100644
index 0000000..908086d
--- /dev/null
+++ b/neutron/files/newton/dhcp_agent.ini
@@ -0,0 +1,184 @@
+[DEFAULT]
+
+#
+# From neutron.base.agent
+#
+
+# Name of Open vSwitch bridge to use (string value)
+#ovs_integration_bridge = br-int
+
+# Uses veth for an OVS interface or not. Support kernels with limited namespace support (e.g. RHEL 6.5) so long as ovs_use_veth is set to
+# True. (boolean value)
+#ovs_use_veth = false
+
+# MTU setting for device. This option will be removed in Newton. Please use the system-wide global_physnet_mtu setting which the agents will
+# take into account when wiring VIFs. (integer value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#network_device_mtu = <None>
+
+# The driver used to manage the virtual interface. (string value)
+#interface_driver = <None>
+interface_driver = neutron.agent.linux.interface.OVSInterfaceDriver
+
+# Timeout in seconds for ovs-vsctl commands. If the timeout expires, ovs commands will fail with ALARMCLOCK error. (integer value)
+#ovs_vsctl_timeout = 10
+
+#
+# From neutron.dhcp.agent
+#
+
+# The DHCP agent will resync its state with Neutron to recover from any transient notification or RPC errors. The interval is number of
+# seconds between attempts. (integer value)
+#resync_interval = 5
+resync_interval = 30
+
+# The driver used to manage the DHCP server. (string value)
+#dhcp_driver = neutron.agent.linux.dhcp.Dnsmasq
+dhcp_driver = neutron.agent.linux.dhcp.Dnsmasq
+
+# The DHCP server can assist with providing metadata support on isolated networks. Setting this value to True will cause the DHCP server to
+# append specific host routes to the DHCP request. The metadata service will only be activated when the subnet does not contain any router
+# port. The guest instance must be configured to request host routes via DHCP (Option 121). This option doesn't have any effect when
+# force_metadata is set to True. (boolean value)
+#enable_isolated_metadata = false
+enable_isolated_metadata = True
+
+# In some cases the Neutron router is not present to provide the metadata IP but the DHCP server can be used to provide this info. Setting
+# this value will force the DHCP server to append specific host routes to the DHCP request. If this option is set, then the metadata service
+# will be activated for all the networks. (boolean value)
+#force_metadata = false
+
+# Allows for serving metadata requests coming from a dedicated metadata access network whose CIDR is 169.254.169.254/16 (or larger prefix),
+# and is connected to a Neutron router from which the VMs send metadata:1 request. In this case DHCP Option 121 will not be injected in VMs,
+# as they will be able to reach 169.254.169.254 through a router. This option requires enable_isolated_metadata = True. (boolean value)
+#enable_metadata_network = false
+enable_metadata_network = False
+
+# Number of threads to use during sync process. Should not exceed connection pool size configured on server. (integer value)
+#num_sync_threads = 4
+
+# Location to store DHCP server config files. (string value)
+#dhcp_confs = $state_path/dhcp
+
+# Domain to use for building the hostnames. This option is deprecated. It has been moved to neutron.conf as dns_domain. It will be removed
+# in a future release. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#dhcp_domain = openstacklocal
+
+# Override the default dnsmasq settings with this file. (string value)
+#dnsmasq_config_file =
+
+# Comma-separated list of the DNS servers which will be used as forwarders. (list value)
+# Deprecated group/name - [DEFAULT]/dnsmasq_dns_server
+#dnsmasq_dns_servers = <None>
+
+# Base log dir for dnsmasq logging. The log contains DHCP and DNS log information and is useful for debugging issues with either DHCP or
+# DNS. If this section is null, disable dnsmasq log. (string value)
+#dnsmasq_base_log_dir = <None>
+
+# Enables the dnsmasq service to provide name resolution for instances via DNS resolvers on the host running the DHCP agent. Effectively
+# removes the '--no-resolv' option from the dnsmasq process arguments. Adding custom DNS resolvers to the 'dnsmasq_dns_servers' option
+# disables this feature. (boolean value)
+#dnsmasq_local_resolv = false
+
+# Limit number of leases to prevent a denial-of-service. (integer value)
+#dnsmasq_lease_max = 16777216
+
+# Use broadcast in DHCP replies. (boolean value)
+#dhcp_broadcast_reply = false
+
+#
+# From oslo.log
+#
+
+# If set to true, the logging level will be set to DEBUG instead of the default INFO level. (boolean value)
+#debug = false
+debug = False
+
+# If set to false, the logging level will be set to WARNING instead of the default INFO level. (boolean value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#verbose = true
+
+# The name of a logging configuration file. This file is appended to any existing logging configuration files. For details about logging
+# configuration files, see the Python logging module documentation. Note that when logging configuration files are used then all logging
+# configuration is set in the configuration file and other logging configuration options are ignored (for example,
+# logging_context_format_string). (string value)
+# Deprecated group/name - [DEFAULT]/log_config
+#log_config_append = <None>
+
+# Defines the format string for %%(asctime)s in log records. Default: %(default)s . This option is ignored if log_config_append is set.
+# (string value)
+#log_date_format = %Y-%m-%d %H:%M:%S
+
+# (Optional) Name of log file to send logging output to. If no default is set, logging will go to stderr as defined by use_stderr. This
+# option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logfile
+#log_file = <None>
+
+# (Optional) The base directory used for relative log_file paths. This option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logdir
+#log_dir = <None>
+
+# Uses logging handler designed to watch file system. When log file is moved or removed this handler will open a new log file with specified
+# path instantaneously. It makes sense only if log_file option is specified and Linux platform is used. This option is ignored if
+# log_config_append is set. (boolean value)
+#watch_log_file = false
+
+# Use syslog for logging. Existing syslog format is DEPRECATED and will be changed later to honor RFC5424. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_syslog = false
+
+# Syslog facility to receive log lines. This option is ignored if log_config_append is set. (string value)
+#syslog_log_facility = LOG_USER
+
+# Log output to standard error. This option is ignored if log_config_append is set. (boolean value)
+#use_stderr = true
+
+# Format string to use for log messages with context. (string value)
+#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
+
+# Format string to use for log messages when context is undefined. (string value)
+#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
+
+# Additional data to append to log message when logging level for the message is DEBUG. (string value)
+#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
+
+# Prefix each line of exception output with this format. (string value)
+#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
+
+# Defines the format string for %(user_identity)s that is used in logging_context_format_string. (string value)
+#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
+
+# List of package logging levels in logger=LEVEL pairs. This option is ignored if log_config_append is set. (list value)
+#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
+
+# Enables or disables publication of error events. (boolean value)
+#publish_errors = false
+
+# The format for an instance that is passed with the log message. (string value)
+#instance_format = "[instance: %(uuid)s] "
+
+# The format for an instance UUID that is passed with the log message. (string value)
+#instance_uuid_format = "[instance: %(uuid)s] "
+
+# Enables or disables fatal status of deprecations. (boolean value)
+#fatal_deprecations = false
+root_helper=sudo neutron-rootwrap /etc/neutron/rootwrap.conf
+state_path=/var/lib/neutron
+
+
+[AGENT]
+
+#
+# From neutron.base.agent
+#
+
+# Seconds between nodes reporting state to server; should be less than agent_down_time, best if it is half or less than agent_down_time.
+# (floating point value)
+#report_interval = 30
+
+# Log agent heartbeats (boolean value)
+#log_agent_heartbeats = false
diff --git a/neutron/files/newton/l3_agent.ini b/neutron/files/newton/l3_agent.ini
new file mode 100644
index 0000000..0095ab7
--- /dev/null
+++ b/neutron/files/newton/l3_agent.ini
@@ -0,0 +1,230 @@
+{%- if pillar.neutron.gateway is defined %}
+{%- from "neutron/map.jinja" import gateway as neutron with context %}
+{%- else %}
+{%- from "neutron/map.jinja" import compute as neutron with context %}
+{%- endif %}
+
+[DEFAULT]
+
+#
+# From neutron.base.agent
+#
+
+# Name of Open vSwitch bridge to use (string value)
+#ovs_integration_bridge = br-int
+
+# Uses veth for an OVS interface or not. Support kernels with limited namespace support (e.g. RHEL 6.5) so long as ovs_use_veth is set to
+# True. (boolean value)
+#ovs_use_veth = false
+
+# MTU setting for device. This option will be removed in Newton. Please use the system-wide global_physnet_mtu setting which the agents will
+# take into account when wiring VIFs. (integer value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#network_device_mtu = <None>
+
+# The driver used to manage the virtual interface. (string value)
+#interface_driver = <None>
+interface_driver = neutron.agent.linux.interface.OVSInterfaceDriver
+
+# Timeout in seconds for ovs-vsctl commands. If the timeout expires, ovs commands will fail with ALARMCLOCK error. (integer value)
+#ovs_vsctl_timeout = 10
+
+#
+# From neutron.l3.agent
+#
+
+# The working mode for the agent. Allowed modes are: 'legacy' - this preserves the existing behavior where the L3 agent is deployed on a
+# centralized networking node to provide L3 services like DNAT, and SNAT. Use this mode if you do not want to adopt DVR. 'dvr' - this mode
+# enables DVR functionality and must be used for an L3 agent that runs on a compute host. 'dvr_snat' - this enables centralized SNAT support
+# in conjunction with DVR. This mode must be used for an L3 agent running on a centralized node (or in single-host deployments, e.g.
+# devstack) (string value)
+# Allowed values: dvr, dvr_snat, legacy
+#agent_mode = legacy
+agent_mode = {{ neutron.agent_mode }}
+
+# TCP Port used by Neutron metadata namespace proxy. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#metadata_port = 9697
+metadata_port = 8775
+
+# Send this many gratuitous ARPs for HA setup, if less than or equal to 0, the feature is disabled (integer value)
+#send_arp_for_ha = 3
+
+# If non-empty, the l3 agent can only configure a router that has the matching router ID. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#router_id =
+
+# Indicates that this L3 agent should also handle routers that do not have an external network gateway configured. This option should be
+# True only for a single agent in a Neutron deployment, and may be False for all agents if all routers must have an external network
+# gateway. (boolean value)
+#handle_internal_only_routers = true
+
+# When external_network_bridge is set, each L3 agent can be associated with no more than one external network. This value should be set to
+# the UUID of that external network. To allow L3 agent support multiple external networks, both the external_network_bridge and
+# gateway_external_network_id must be left empty. (string value)
+#gateway_external_network_id =
+
+# With IPv6, the network used for the external gateway does not need to have an associated subnet, since the automatically assigned link-
+# local address (LLA) can be used. However, an IPv6 gateway address is needed for use as the next-hop for the default route. If no IPv6
+# gateway address is configured here, (and only then) the neutron router will be configured to get its default route from router
+# advertisements (RAs) from the upstream router; in which case the upstream router must also be configured to send these RAs. The
+# ipv6_gateway, when configured, should be the LLA of the interface on the upstream router. If a next-hop using a global unique address
+# (GUA) is desired, it needs to be done via a subnet allocated to the network and not through this parameter. (string value)
+#ipv6_gateway =
+
+# Driver used for ipv6 prefix delegation. This needs to be an entry point defined in the neutron.agent.linux.pd_drivers namespace. See
+# setup.cfg for entry points included with the neutron source. (string value)
+#prefix_delegation_driver = dibbler
+
+# Allow running metadata proxy. (boolean value)
+#enable_metadata_proxy = true
+
+# Iptables mangle mark used to mark metadata valid requests. This mark will be masked with 0xffff so that only the lower 16 bits will be
+# used. (string value)
+#metadata_access_mark = 0x1
+
+# Iptables mangle mark used to mark ingress from external network. This mark will be masked with 0xffff so that only the lower 16 bits will
+# be used. (string value)
+#external_ingress_mark = 0x2
+
+# Name of bridge used for external network traffic. This should be set to an empty value for the Linux Bridge. When this parameter is set,
+# each L3 agent can be associated with no more than one external network. (string value)
+#external_network_bridge = br-ex
+external_network_bridge =
+
+# Seconds between running periodic tasks (integer value)
+#periodic_interval = 40
+
+# Number of separate API worker processes for service. If not specified, the default is equal to the number of CPUs available for best
+# performance. (integer value)
+#api_workers = <None>
+
+# Number of RPC worker processes for service (integer value)
+#rpc_workers = 1
+
+# Number of RPC worker processes dedicated to state reports queue (integer value)
+#rpc_state_report_workers = 1
+
+# Range of seconds to randomly delay when starting the periodic task scheduler to reduce stampeding. (Disable by setting to 0) (integer
+# value)
+#periodic_fuzzy_delay = 5
+
+# Location to store keepalived/conntrackd config files (string value)
+#ha_confs_path = $state_path/ha_confs
+
+# VRRP authentication type (string value)
+# Allowed values: AH, PASS
+#ha_vrrp_auth_type = PASS
+
+# VRRP authentication password (string value)
+#ha_vrrp_auth_password = <None>
+
+# The advertisement interval in seconds (integer value)
+#ha_vrrp_advert_int = 2
+
+# Service to handle DHCPv6 Prefix delegation. (string value)
+#pd_dhcp_driver = dibbler
+
+# Location to store IPv6 RA config files (string value)
+#ra_confs = $state_path/ra
+
+# MinRtrAdvInterval setting for radvd.conf (integer value)
+#min_rtr_adv_interval = 30
+
+# MaxRtrAdvInterval setting for radvd.conf (integer value)
+#max_rtr_adv_interval = 100
+
+#
+# From oslo.log
+#
+
+# If set to true, the logging level will be set to DEBUG instead of the default INFO level. (boolean value)
+#debug = false
+debug = False
+
+# If set to false, the logging level will be set to WARNING instead of the default INFO level. (boolean value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#verbose = true
+
+# The name of a logging configuration file. This file is appended to any existing logging configuration files. For details about logging
+# configuration files, see the Python logging module documentation. Note that when logging configuration files are used then all logging
+# configuration is set in the configuration file and other logging configuration options are ignored (for example,
+# logging_context_format_string). (string value)
+# Deprecated group/name - [DEFAULT]/log_config
+#log_config_append = <None>
+
+# Defines the format string for %%(asctime)s in log records. Default: %(default)s . This option is ignored if log_config_append is set.
+# (string value)
+#log_date_format = %Y-%m-%d %H:%M:%S
+
+# (Optional) Name of log file to send logging output to. If no default is set, logging will go to stderr as defined by use_stderr. This
+# option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logfile
+#log_file = <None>
+
+# (Optional) The base directory used for relative log_file paths. This option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logdir
+#log_dir = <None>
+
+# Uses logging handler designed to watch file system. When log file is moved or removed this handler will open a new log file with specified
+# path instantaneously. It makes sense only if log_file option is specified and Linux platform is used. This option is ignored if
+# log_config_append is set. (boolean value)
+#watch_log_file = false
+
+# Use syslog for logging. Existing syslog format is DEPRECATED and will be changed later to honor RFC5424. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_syslog = false
+
+# Syslog facility to receive log lines. This option is ignored if log_config_append is set. (string value)
+#syslog_log_facility = LOG_USER
+
+# Log output to standard error. This option is ignored if log_config_append is set. (boolean value)
+#use_stderr = true
+
+# Format string to use for log messages with context. (string value)
+#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
+
+# Format string to use for log messages when context is undefined. (string value)
+#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
+
+# Additional data to append to log message when logging level for the message is DEBUG. (string value)
+#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
+
+# Prefix each line of exception output with this format. (string value)
+#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
+
+# Defines the format string for %(user_identity)s that is used in logging_context_format_string. (string value)
+#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
+
+# List of package logging levels in logger=LEVEL pairs. This option is ignored if log_config_append is set. (list value)
+#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
+
+# Enables or disables publication of error events. (boolean value)
+#publish_errors = false
+
+# The format for an instance that is passed with the log message. (string value)
+#instance_format = "[instance: %(uuid)s] "
+
+# The format for an instance UUID that is passed with the log message. (string value)
+#instance_uuid_format = "[instance: %(uuid)s] "
+
+# Enables or disables fatal status of deprecations. (boolean value)
+#fatal_deprecations = false
+
+
+[AGENT]
+
+#
+# From neutron.base.agent
+#
+
+# Seconds between nodes reporting state to server; should be less than agent_down_time, best if it is half or less than agent_down_time.
+# (floating point value)
+#report_interval = 30
+
+# Log agent heartbeats (boolean value)
+#log_agent_heartbeats = false
diff --git a/neutron/files/newton/metadata_agent.ini b/neutron/files/newton/metadata_agent.ini
new file mode 100644
index 0000000..15c21ac
--- /dev/null
+++ b/neutron/files/newton/metadata_agent.ini
@@ -0,0 +1,158 @@
+{%- if pillar.neutron.gateway is defined %}
+{%- from "neutron/map.jinja" import gateway as neutron with context %}
+{%- else %}
+{%- from "neutron/map.jinja" import compute as neutron with context %}
+{%- endif %}
+[DEFAULT]
+
+#
+# From neutron.metadata.agent
+#
+
+# Location for Metadata Proxy UNIX domain socket. (string value)
+#metadata_proxy_socket = $state_path/metadata_proxy
+
+# User (uid or name) running metadata proxy after its initialization (if empty: agent effective user). (string value)
+#metadata_proxy_user =
+
+# Group (gid or name) running metadata proxy after its initialization (if empty: agent effective group). (string value)
+#metadata_proxy_group =
+
+# Certificate Authority public key (CA cert) file for ssl (string value)
+#auth_ca_cert = <None>
+
+# IP address used by Nova metadata server. (string value)
+#nova_metadata_ip = 127.0.0.1
+nova_metadata_ip = {{ neutron.metadata.host }}
+
+# TCP Port used by Nova metadata server. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#nova_metadata_port = 8775
+
+# When proxying metadata requests, Neutron signs the Instance-ID header with a shared secret to prevent spoofing. You may select any string
+# for a secret, but it must match here and in the configuration used by the Nova Metadata Server. NOTE: Nova uses the same config key, but
+# in [neutron] section. (string value)
+metadata_proxy_shared_secret = {{ neutron.metadata.password }}
+
+# Protocol to access nova metadata, http or https (string value)
+# Allowed values: http, https
+#nova_metadata_protocol = http
+nova_metadata_protocol = http
+
+# Allow to perform insecure SSL (https) requests to nova metadata (boolean value)
+#nova_metadata_insecure = false
+
+# Client certificate for nova metadata api server. (string value)
+#nova_client_cert =
+
+# Private key of client certificate. (string value)
+#nova_client_priv_key =
+
+# Metadata Proxy UNIX domain socket mode, 4 values allowed: 'deduce': deduce mode from metadata_proxy_user/group values, 'user': set
+# metadata proxy socket mode to 0o644, to use when metadata_proxy_user is agent effective user or root, 'group': set metadata proxy socket
+# mode to 0o664, to use when metadata_proxy_group is agent effective group or root, 'all': set metadata proxy socket mode to 0o666, to use
+# otherwise. (string value)
+# Allowed values: deduce, user, group, all
+#metadata_proxy_socket_mode = deduce
+
+# Number of separate worker processes for metadata server (defaults to half of the number of CPUs) (integer value)
+#metadata_workers = 4
+
+# Number of backlog requests to configure the metadata server socket with (integer value)
+#metadata_backlog = 4096
+
+# URL to connect to the cache back end. (string value)
+#cache_url = memory://
+
+#
+# From oslo.log
+#
+
+# If set to true, the logging level will be set to DEBUG instead of the default INFO level. (boolean value)
+#debug = false
+debug = False
+
+# If set to false, the logging level will be set to WARNING instead of the default INFO level. (boolean value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#verbose = true
+
+# The name of a logging configuration file. This file is appended to any existing logging configuration files. For details about logging
+# configuration files, see the Python logging module documentation. Note that when logging configuration files are used then all logging
+# configuration is set in the configuration file and other logging configuration options are ignored (for example,
+# logging_context_format_string). (string value)
+# Deprecated group/name - [DEFAULT]/log_config
+#log_config_append = <None>
+
+# Defines the format string for %%(asctime)s in log records. Default: %(default)s . This option is ignored if log_config_append is set.
+# (string value)
+#log_date_format = %Y-%m-%d %H:%M:%S
+
+# (Optional) Name of log file to send logging output to. If no default is set, logging will go to stderr as defined by use_stderr. This
+# option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logfile
+#log_file = <None>
+
+# (Optional) The base directory used for relative log_file paths. This option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logdir
+#log_dir = <None>
+
+# Uses logging handler designed to watch file system. When log file is moved or removed this handler will open a new log file with specified
+# path instantaneously. It makes sense only if log_file option is specified and Linux platform is used. This option is ignored if
+# log_config_append is set. (boolean value)
+#watch_log_file = false
+
+# Use syslog for logging. Existing syslog format is DEPRECATED and will be changed later to honor RFC5424. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_syslog = false
+
+# Syslog facility to receive log lines. This option is ignored if log_config_append is set. (string value)
+#syslog_log_facility = LOG_USER
+
+# Log output to standard error. This option is ignored if log_config_append is set. (boolean value)
+#use_stderr = true
+
+# Format string to use for log messages with context. (string value)
+#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
+
+# Format string to use for log messages when context is undefined. (string value)
+#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
+
+# Additional data to append to log message when logging level for the message is DEBUG. (string value)
+#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
+
+# Prefix each line of exception output with this format. (string value)
+#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
+
+# Defines the format string for %(user_identity)s that is used in logging_context_format_string. (string value)
+#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
+
+# List of package logging levels in logger=LEVEL pairs. This option is ignored if log_config_append is set. (list value)
+#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
+
+# Enables or disables publication of error events. (boolean value)
+#publish_errors = false
+
+# The format for an instance that is passed with the log message. (string value)
+#instance_format = "[instance: %(uuid)s] "
+
+# The format for an instance UUID that is passed with the log message. (string value)
+#instance_uuid_format = "[instance: %(uuid)s] "
+
+# Enables or disables fatal status of deprecations. (boolean value)
+#fatal_deprecations = false
+
+
+[AGENT]
+
+#
+# From neutron.metadata.agent
+#
+
+# Seconds between nodes reporting state to server; should be less than agent_down_time, best if it is half or less than agent_down_time.
+# (floating point value)
+#report_interval = 30
+
+# Log agent heartbeats (boolean value)
+#log_agent_heartbeats = false
diff --git a/neutron/files/newton/ml2_conf.ini b/neutron/files/newton/ml2_conf.ini
new file mode 100644
index 0000000..67841f2
--- /dev/null
+++ b/neutron/files/newton/ml2_conf.ini
@@ -0,0 +1,212 @@
+{%- from "neutron/map.jinja" import server with context %}
+[DEFAULT]
+
+#
+# From oslo.log
+#
+
+# If set to true, the logging level will be set to DEBUG instead of the default INFO level. (boolean value)
+#debug = false
+
+# If set to false, the logging level will be set to WARNING instead of the default INFO level. (boolean value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#verbose = true
+
+# The name of a logging configuration file. This file is appended to any existing logging configuration files. For details about logging
+# configuration files, see the Python logging module documentation. Note that when logging configuration files are used then all logging
+# configuration is set in the configuration file and other logging configuration options are ignored (for example,
+# logging_context_format_string). (string value)
+# Deprecated group/name - [DEFAULT]/log_config
+#log_config_append = <None>
+
+# Defines the format string for %%(asctime)s in log records. Default: %(default)s . This option is ignored if log_config_append is set.
+# (string value)
+#log_date_format = %Y-%m-%d %H:%M:%S
+
+# (Optional) Name of log file to send logging output to. If no default is set, logging will go to stderr as defined by use_stderr. This
+# option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logfile
+#log_file = <None>
+
+# (Optional) The base directory used for relative log_file paths. This option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logdir
+#log_dir = <None>
+
+# Uses logging handler designed to watch file system. When log file is moved or removed this handler will open a new log file with specified
+# path instantaneously. It makes sense only if log_file option is specified and Linux platform is used. This option is ignored if
+# log_config_append is set. (boolean value)
+#watch_log_file = false
+
+# Use syslog for logging. Existing syslog format is DEPRECATED and will be changed later to honor RFC5424. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_syslog = false
+
+# Syslog facility to receive log lines. This option is ignored if log_config_append is set. (string value)
+#syslog_log_facility = LOG_USER
+
+# Log output to standard error. This option is ignored if log_config_append is set. (boolean value)
+#use_stderr = true
+
+# Format string to use for log messages with context. (string value)
+#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
+
+# Format string to use for log messages when context is undefined. (string value)
+#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
+
+# Additional data to append to log message when logging level for the message is DEBUG. (string value)
+#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
+
+# Prefix each line of exception output with this format. (string value)
+#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
+
+# Defines the format string for %(user_identity)s that is used in logging_context_format_string. (string value)
+#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
+
+# List of package logging levels in logger=LEVEL pairs. This option is ignored if log_config_append is set. (list value)
+#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
+
+# Enables or disables publication of error events. (boolean value)
+#publish_errors = false
+
+# The format for an instance that is passed with the log message. (string value)
+#instance_format = "[instance: %(uuid)s] "
+
+# The format for an instance UUID that is passed with the log message. (string value)
+#instance_uuid_format = "[instance: %(uuid)s] "
+
+# Enables or disables fatal status of deprecations. (boolean value)
+#fatal_deprecations = false
+
+
+[ml2]
+
+#
+# From neutron.ml2
+#
+
+# List of network type driver entrypoints to be loaded from the neutron.ml2.type_drivers namespace. (list value)
+#type_drivers = local,flat,vlan,gre,vxlan,geneve
+type_drivers = local,flat,vlan,gre,vxlan
+
+# Ordered list of network_types to allocate as tenant networks. The default value 'local' is useful for single-box testing but provides no
+# connectivity between hosts. (list value)
+#tenant_network_types = local
+tenant_network_types = {{ server.backend.tenant_network_types }}
+
+# An ordered list of networking mechanism driver entrypoints to be loaded from the neutron.ml2.mechanism_drivers namespace. (list value)
+#mechanism_drivers =openvswitch,l2population
+mechanism_drivers ={%- for backend_name, mechanism in server.backend.get('mechanism', {}).iteritems() %}{{ mechanism.driver }},{%- endfor %}l2population
+
+# An ordered list of extension driver entrypoints to be loaded from the neutron.ml2.extension_drivers namespace. For example:
+# extension_drivers = port_security,qos (list value)
+extension_drivers = port_security
+#extension_drivers =
+
+# Maximum size of an IP packet (MTU) that can traverse the underlying physical network infrastructure without fragmentation for
+# overlay/tunnel networks. In most cases, use the same value as the global_physnet_mtu option. (integer value)
+#path_mtu = 1500
+path_mtu = {{ server.get('global_physnet_mtu', '1500') }}
+
+# A list of mappings of physical networks to MTU values. The format of the mapping is <physnet>:<mtu val>. This mapping allows specifying a
+# physical network MTU value that differs from the default global_physnet_mtu value. (list value)
+#physical_network_mtus =
+physical_network_mtus =physnet1:{{ server.backend.get('external_mtu', '1500') }}{%- if "vlan" in server.backend.tenant_network_types %},physnet2:{{ server.backend.get('external_mtu', '1500') }}{%- endif %}
+
+# Default network type for external networks when no provider attributes are specified. By default it is None, which means that if provider
+# attributes are not specified while creating external networks then they will have the same type as tenant networks. Allowed values for
+# external_network_type config option depend on the network type values configured in type_drivers config option. (string value)
+#external_network_type = <None>
+
+
+[ml2_type_flat]
+
+#
+# From neutron.ml2
+#
+
+# List of physical_network names with which flat networks can be created. Use default '*' to allow flat networks with arbitrary
+# physical_network names. Use an empty list to disable flat networks. (list value)
+#flat_networks = *
+flat_networks = *
+
+
+[ml2_type_geneve]
+
+#
+# From neutron.ml2
+#
+
+# Comma-separated list of <vni_min>:<vni_max> tuples enumerating ranges of Geneve VNI IDs that are available for tenant network allocation
+# (list value)
+#vni_ranges =
+
+# Geneve encapsulation header size is dynamic, this value is used to calculate the maximum MTU for the driver. This is the sum of the sizes
+# of the outer ETH + IP + UDP + GENEVE header sizes. The default size for this field is 50, which is the size of the Geneve header without
+# any additional option headers. (integer value)
+#max_header_size = 50
+
+
+[ml2_type_gre]
+
+#
+# From neutron.ml2
+#
+
+# Comma-separated list of <tun_min>:<tun_max> tuples enumerating ranges of GRE tunnel IDs that are available for tenant network allocation
+# (list value)
+#tunnel_id_ranges =
+tunnel_id_ranges =2:65535
+
+
+[ml2_type_vlan]
+
+#
+# From neutron.ml2
+#
+
+# List of <physical_network>:<vlan_min>:<vlan_max> or <physical_network> specifying physical_network names usable for VLAN provider and
+# tenant networks, as well as ranges of VLAN tags on each available for allocation to tenant networks. (list value)
+#network_vlan_ranges =
+network_vlan_ranges = physnet1{%- if server.backend.external_vlan_range is defined %}:{{ server.backend.external_vlan_range }}{%- endif %}{%- if "vlan" in server.backend.tenant_network_types %},physnet2:{{ server.backend.tenant_vlan_range }}{%- endif %}
+
+
+[ml2_type_vxlan]
+
+#
+# From neutron.ml2
+#
+
+# Comma-separated list of <vni_min>:<vni_max> tuples enumerating ranges of VXLAN VNI IDs that are available for tenant network allocation
+# (list value)
+#vni_ranges =
+vni_ranges =2:65535
+
+# Multicast group for VXLAN. When configured, will enable sending all broadcast traffic to this multicast group. When left unconfigured,
+# will disable multicast VXLAN mode. (string value)
+#vxlan_group = <None>
+vxlan_group = 224.0.0.1
+
+
+[securitygroup]
+
+#
+# From neutron.ml2
+#
+
+# Driver for security groups firewall in the L2 agent (string value)
+#firewall_driver = <None>
+{%- if server.dpdk %}
+firewall_driver = openvswitch
+{%- else %}
+firewall_driver = neutron.agent.linux.iptables_firewall.OVSHybridIptablesFirewallDriver
+{%- endif %}
+
+# Controls whether the neutron security group API is enabled in the server. It should be false when using no security groups or using the
+# nova security group API. (boolean value)
+#enable_security_group = true
+enable_security_group = True
+
+# Use ipset to speed-up the iptables based security groups. Enabling ipset support requires that ipset is installed on L2 agent node.
+# (boolean value)
+#enable_ipset = true
diff --git a/neutron/files/newton/neutron-generic.conf.Debian b/neutron/files/newton/neutron-generic.conf.Debian
new file mode 100644
index 0000000..545d04a
--- /dev/null
+++ b/neutron/files/newton/neutron-generic.conf.Debian
@@ -0,0 +1,1559 @@
+{%- if pillar.neutron.gateway is defined %}
+{%- from "neutron/map.jinja" import gateway as neutron with context %}
+{%- else %}
+{%- from "neutron/map.jinja" import compute as neutron with context %}
+{%- endif %}
+[DEFAULT]
+
+#
+# From neutron
+#
+
+# Where to store Neutron state files. This directory must be writable by the
+# agent. (string value)
+#state_path = /var/lib/neutron
+state_path = /var/lib/neutron
+
+
+
+# The path for API extensions. Note that this can be a colon-separated list of
+# paths. For example: api_extensions_path =
+# extensions:/path/to/more/exts:/even/more/exts. The __path__ of
+# neutron.extensions is appended to this, so if your extensions are in there
+# you don't need to specify them here. (string value)
+
+{% if neutron.backend.engine == "ml2" %}
+
+core_plugin = neutron.plugins.ml2.plugin.Ml2Plugin
+
+service_plugins =neutron.services.l3_router.l3_router_plugin.L3RouterPlugin,neutron.services.metering.metering_plugin.MeteringPlugin
+
+{% endif %}
+
+# The type of authentication to use (string value)
+#auth_strategy = keystone
+auth_strategy = keystone
+
+# The service plugins Neutron will use (list value)
+# The base MAC address Neutron will use for VIFs. The first 3 octets will
+# remain unchanged. If the 4th octet is not 00, it will also be used. The
+# others will be randomly generated. (string value)
+#base_mac = fa:16:3e:00:00:00
+
+# How many times Neutron will retry MAC generation (integer value)
+#mac_generation_retries = 16
+mac_generation_retries = 32
+
+# Allow the usage of the bulk API (boolean value)
+#allow_bulk = true
+
+# Allow the usage of the pagination (boolean value)
+#allow_pagination = false
+
+# Allow the usage of the sorting (boolean value)
+#allow_sorting = false
+
+# The maximum number of items returned in a single response, value was
+# 'infinite' or negative integer means no limit (string value)
+#pagination_max_limit = -1
+
+# Default value of availability zone hints. The availability zone aware
+# schedulers use this when the resources availability_zone_hints is empty.
+# Multiple availability zones can be specified by a comma separated string.
+# This value can be empty. In this case, even if availability_zone_hints for a
+# resource is empty, availability zone is considered for high availability
+# while scheduling the resource. (list value)
+#default_availability_zones =
+
+# Maximum number of DNS nameservers per subnet (integer value)
+#max_dns_nameservers = 5
+
+# Maximum number of host routes per subnet (integer value)
+#max_subnet_host_routes = 20
+
+# Maximum number of fixed ips per port. This option is deprecated and will be
+# removed in the N release. (integer value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#max_fixed_ips_per_port = 5
+
+# Default IPv4 subnet pool to be used for automatic subnet CIDR allocation.
+# Specifies by UUID the pool to be used in case where creation of a subnet is
+# being called without a subnet pool ID. If not set then no pool will be used
+# unless passed explicitly to the subnet create. If no pool is used, then a
+# CIDR must be passed to create a subnet and that subnet will not be allocated
+# from any pool; it will be considered part of the tenant's private address
+# space. This option is deprecated for removal in the N release. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#default_ipv4_subnet_pool = <None>
+
+# Default IPv6 subnet pool to be used for automatic subnet CIDR allocation.
+# Specifies by UUID the pool to be used in case where creation of a subnet is
+# being called without a subnet pool ID. See the description for
+# default_ipv4_subnet_pool for more information. This option is deprecated for
+# removal in the N release. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#default_ipv6_subnet_pool = <None>
+
+# Enables IPv6 Prefix Delegation for automatic subnet CIDR allocation. Set to
+# True to enable IPv6 Prefix Delegation for subnet allocation in a PD-capable
+# environment. Users making subnet creation requests for IPv6 subnets without
+# providing a CIDR or subnetpool ID will be given a CIDR via the Prefix
+# Delegation mechanism. Note that enabling PD will override the behavior of the
+# default IPv6 subnetpool. (boolean value)
+#ipv6_pd_enabled = false
+
+# DHCP lease duration (in seconds). Use -1 to tell dnsmasq to use infinite
+# lease times. (integer value)
+# Deprecated group/name - [DEFAULT]/dhcp_lease_time
+#dhcp_lease_duration = 86400
+dhcp_lease_duration = 600
+
+# Domain to use for building the hostnames (string value)
+#dns_domain = openstacklocal
+
+# Driver for external DNS integration. (string value)
+#external_dns_driver = <None>
+
+# Allow sending resource operation notification to DHCP agent (boolean value)
+#dhcp_agent_notification = true
+
+# Allow overlapping IP support in Neutron. Attention: the following parameter
+# MUST be set to False if Neutron is being used in conjunction with Nova
+# security groups. (boolean value)
+#allow_overlapping_ips = false
+allow_overlapping_ips = True
+
+# Hostname to be used by the Neutron server, agents and services running on
+# this machine. All the agents and services running on this machine must use
+# the same host value. (string value)
+#host = example.domain
+
+# Ensure that configured gateway is on subnet. For IPv6, validate only if
+# gateway is not a link local address. Deprecated, to be removed during the
+# Newton release, at which point the gateway will not be forced on to subnet.
+# (boolean value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#force_gateway_on_subnet = true
+
+# Send notification to nova when port status changes (boolean value)
+#notify_nova_on_port_status_changes = true
+notify_nova_on_port_status_changes = True
+
+# Send notification to nova when port data (fixed_ips/floatingip) changes so
+# nova can update its cache. (boolean value)
+#notify_nova_on_port_data_changes = true
+notify_nova_on_port_data_changes = True
+
+# Number of seconds between sending events to nova if there are any events to
+# send. (integer value)
+#send_events_interval = 2
+
+# If True, advertise network MTU values if core plugin calculates them. MTU is
+# advertised to running instances via DHCP and RA MTU options. (boolean value)
+#advertise_mtu = true
+advertise_mtu = True
+
+# Neutron IPAM (IP address management) driver to use. If ipam_driver is not set
+# (default behavior), no IPAM driver is used. In order to use the reference
+# implementation of Neutron IPAM driver, use 'internal'. (string value)
+#ipam_driver = <None>
+
+# If True, then allow plugins that support it to create VLAN transparent
+# networks. (boolean value)
+#vlan_transparent = false
+
+# This will choose the web framework in which to run the Neutron API server.
+# 'pecan' is a new experiemental rewrite of the API server. (string value)
+# Allowed values: legacy, pecan
+#web_framework = legacy
+
+# MTU of the underlying physical network. Neutron uses this value to calculate
+# MTU for all virtual network components. For flat and VLAN networks, neutron
+# uses this value without modification. For overlay networks such as VXLAN,
+# neutron automatically subtracts the overlay protocol overhead from this
+# value. Defaults to 1500, the standard value for Ethernet. (integer value)
+# Deprecated group/name - [ml2]/segment_mtu
+#global_physnet_mtu = 1500
+
+# Number of backlog requests to configure the socket with (integer value)
+#backlog = 4096
+
+# Number of seconds to keep retrying to listen (integer value)
+#retry_until_window = 30
+
+# Enable SSL on the API server (boolean value)
+#use_ssl = false
+
+# Seconds between running periodic tasks (integer value)
+#periodic_interval = 40
+
+# Number of separate API worker processes for service. If not specified, the
+# default is equal to the number of CPUs available for best performance.
+# (integer value)
+#api_workers = <None>
+
+# Number of RPC worker processes for service (integer value)
+#rpc_workers = 1
+
+# Number of RPC worker processes dedicated to state reports queue (integer
+# value)
+#rpc_state_report_workers = 1
+
+# Range of seconds to randomly delay when starting the periodic task scheduler
+# to reduce stampeding. (Disable by setting to 0) (integer value)
+#periodic_fuzzy_delay = 5
+
+#
+# From neutron.agent
+#
+
+# The driver used to manage the virtual interface. (string value)
+#interface_driver = <None>
+
+# Location for Metadata Proxy UNIX domain socket. (string value)
+#metadata_proxy_socket = $state_path/metadata_proxy
+
+# User (uid or name) running metadata proxy after its initialization (if empty:
+# agent effective user). (string value)
+#metadata_proxy_user =
+
+# Group (gid or name) running metadata proxy after its initialization (if
+# empty: agent effective group). (string value)
+#metadata_proxy_group =
+
+# Enable/Disable log watch by metadata proxy. It should be disabled when
+# metadata_proxy_user/group is not allowed to read/write its log file and
+# copytruncate logrotate option must be used if logrotate is enabled on
+# metadata proxy log files. Option default value is deduced from
+# metadata_proxy_user: watch log is enabled if metadata_proxy_user is agent
+# effective user id/name. (boolean value)
+#metadata_proxy_watch_log = <None>
+
+#
+# From neutron.db
+#
+
+# Seconds to regard the agent is down; should be at least twice
+# report_interval, to be sure the agent is down for good. (integer value)
+#agent_down_time = 75
+agent_down_time = 30
+
+# Representing the resource type whose load is being reported by the agent.
+# This can be "networks", "subnets" or "ports". When specified (Default is
+# networks), the server will extract particular load sent as part of its agent
+# configuration object from the agent report state, which is the number of
+# resources being consumed, at every report_interval.dhcp_load_type can be used
+# in combination with network_scheduler_driver =
+# neutron.scheduler.dhcp_agent_scheduler.WeightScheduler When the
+# network_scheduler_driver is WeightScheduler, dhcp_load_type can be configured
+# to represent the choice for the resource being balanced. Example:
+# dhcp_load_type=networks (string value)
+# Allowed values: networks, subnets, ports
+#dhcp_load_type = networks
+
+# Agent starts with admin_state_up=False when enable_new_agents=False. In the
+# case, user's resources will not be scheduled automatically to the agent until
+# admin changes admin_state_up to True. (boolean value)
+#enable_new_agents = true
+
+# Maximum number of routes per router (integer value)
+#max_routes = 30
+
+# Define the default value of enable_snat if not provided in
+# external_gateway_info. (boolean value)
+#enable_snat_by_default = true
+
+# Driver to use for scheduling network to DHCP agent (string value)
+#network_scheduler_driver = neutron.scheduler.dhcp_agent_scheduler.WeightScheduler
+
+# Allow auto scheduling networks to DHCP agent. (boolean value)
+#network_auto_schedule = true
+
+# Automatically remove networks from offline DHCP agents. (boolean value)
+#allow_automatic_dhcp_failover = true
+
+# Number of DHCP agents scheduled to host a tenant network. If this number is
+# greater than 1, the scheduler automatically assigns multiple DHCP agents for
+# a given tenant network, providing high availability for DHCP service.
+# (integer value)
+#dhcp_agents_per_network = 1
+
+# Enable services on an agent with admin_state_up False. If this option is
+# False, when admin_state_up of an agent is turned False, services on it will
+# be disabled. Agents with admin_state_up False are not selected for automatic
+# scheduling regardless of this option. But manual scheduling to such agents is
+# available if this option is True. (boolean value)
+#enable_services_on_agents_with_admin_state_down = false
+
+# The base mac address used for unique DVR instances by Neutron. The first 3
+# octets will remain unchanged. If the 4th octet is not 00, it will also be
+# used. The others will be randomly generated. The 'dvr_base_mac' *must* be
+# different from 'base_mac' to avoid mixing them up with MAC's allocated for
+# tenant ports. A 4 octet example would be dvr_base_mac = fa:16:3f:4f:00:00.
+# The default is 3 octet (string value)
+#dvr_base_mac = fa:16:3f:00:00:00
+
+# System-wide flag to determine the type of router that tenants can create.
+# Only admin can override. (boolean value)
+#router_distributed = false
+
+# Driver to use for scheduling router to a default L3 agent (string value)
+#router_scheduler_driver = neutron.scheduler.l3_agent_scheduler.LeastRoutersScheduler
+
+# Allow auto scheduling of routers to L3 agent. (boolean value)
+#router_auto_schedule = true
+
+# Automatically reschedule routers from offline L3 agents to online L3 agents.
+# (boolean value)
+#allow_automatic_l3agent_failover = false
+
+# Enable HA mode for virtual routers. (boolean value)
+#l3_ha = false
+
+# Maximum number of L3 agents which a HA router will be scheduled on. If it is
+# set to 0 then the router will be scheduled on every agent. (integer value)
+#max_l3_agents_per_router = 3
+
+# Minimum number of L3 agents which a HA router will be scheduled on. If it is
+# set to 0 then the router will be scheduled on every agent. (integer value)
+#min_l3_agents_per_router = 2
+
+# Subnet used for the l3 HA admin network. (string value)
+#l3_ha_net_cidr = 169.254.192.0/18
+
+# The network type to use when creating the HA network for an HA router. By
+# default or if empty, the first 'tenant_network_types' is used. This is
+# helpful when the VRRP traffic should use a specific network which is not the
+# default one. (string value)
+#l3_ha_network_type =
+
+# The physical network name with which the HA network can be created. (string
+# value)
+#l3_ha_network_physical_name =
+
+#
+# From neutron.extensions
+#
+
+# Maximum number of allowed address pairs (integer value)
+#max_allowed_address_pair = 10
+
+#
+# From neutron.qos
+#
+
+# Drivers list to use to send the update notification (list value)
+#notification_drivers = m,e,s,s,a,g,e,_,q,u,e,u,e
+
+#
+# From oslo.log
+#
+
+# If set to true, the logging level will be set to DEBUG instead of the default
+# INFO level. (boolean value)
+#debug = false
+
+# If set to false, the logging level will be set to WARNING instead of the
+# default INFO level. (boolean value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#verbose = true
+verbose = true
+
+# The name of a logging configuration file. This file is appended to any
+# existing logging configuration files. For details about logging configuration
+# files, see the Python logging module documentation. Note that when logging
+# configuration files are used then all logging configuration is set in the
+# configuration file and other logging configuration options are ignored (for
+# example, logging_context_format_string). (string value)
+# Deprecated group/name - [DEFAULT]/log_config
+#log_config_append = <None>
+
+# Defines the format string for %%(asctime)s in log records. Default:
+# %(default)s . This option is ignored if log_config_append is set. (string
+# value)
+#log_date_format = %Y-%m-%d %H:%M:%S
+
+# (Optional) Name of log file to send logging output to. If no default is set,
+# logging will go to stderr as defined by use_stderr. This option is ignored if
+# log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logfile
+#log_file = <None>
+
+# (Optional) The base directory used for relative log_file paths. This option
+# is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logdir
+#log_dir = <None>
+
+# Uses logging handler designed to watch file system. When log file is moved or
+# removed this handler will open a new log file with specified path
+# instantaneously. It makes sense only if log_file option is specified and
+# Linux platform is used. This option is ignored if log_config_append is set.
+# (boolean value)
+#watch_log_file = false
+
+# Use syslog for logging. Existing syslog format is DEPRECATED and will be
+# changed later to honor RFC5424. This option is ignored if log_config_append
+# is set. (boolean value)
+#use_syslog = false
+
+# Syslog facility to receive log lines. This option is ignored if
+# log_config_append is set. (string value)
+#syslog_log_facility = LOG_USER
+
+# Log output to standard error. This option is ignored if log_config_append is
+# set. (boolean value)
+#use_stderr = true
+
+# Format string to use for log messages with context. (string value)
+#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
+
+# Format string to use for log messages when context is undefined. (string
+# value)
+#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
+
+# Additional data to append to log message when logging level for the message
+# is DEBUG. (string value)
+#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
+
+# Prefix each line of exception output with this format. (string value)
+#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
+
+# Defines the format string for %(user_identity)s that is used in
+# logging_context_format_string. (string value)
+#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
+
+# List of package logging levels in logger=LEVEL pairs. This option is ignored
+# if log_config_append is set. (list value)
+#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
+
+# Enables or disables publication of error events. (boolean value)
+#publish_errors = false
+
+# The format for an instance that is passed with the log message. (string
+# value)
+#instance_format = "[instance: %(uuid)s] "
+
+# The format for an instance UUID that is passed with the log message. (string
+# value)
+#instance_uuid_format = "[instance: %(uuid)s] "
+
+# Enables or disables fatal status of deprecations. (boolean value)
+#fatal_deprecations = false
+
+#
+# From oslo.messaging
+#
+
+# Size of RPC connection pool. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_conn_pool_size
+#rpc_conn_pool_size = 30
+
+# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
+# The "host" option should point or resolve to this address. (string value)
+#rpc_zmq_bind_address = *
+
+# MatchMaker driver. (string value)
+# Allowed values: redis, dummy
+#rpc_zmq_matchmaker = redis
+
+# Type of concurrency used. Either "native" or "eventlet" (string value)
+#rpc_zmq_concurrency = eventlet
+
+# Number of ZeroMQ contexts, defaults to 1. (integer value)
+#rpc_zmq_contexts = 1
+
+# Maximum number of ingress messages to locally buffer per topic. Default is
+# unlimited. (integer value)
+#rpc_zmq_topic_backlog = <None>
+
+# Directory for holding IPC sockets. (string value)
+#rpc_zmq_ipc_dir = /var/run/openstack
+
+# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
+# "host" option, if running Nova. (string value)
+#rpc_zmq_host = localhost
+
+# Seconds to wait before a cast expires (TTL). The default value of -1
+# specifies an infinite linger period. The value of 0 specifies no linger
+# period. Pending messages shall be discarded immediately when the socket is
+# closed. Only supported by impl_zmq. (integer value)
+#rpc_cast_timeout = -1
+rpc_cast_timeout=30
+
+# The default number of seconds that poll should wait. Poll raises timeout
+# exception when timeout expired. (integer value)
+#rpc_poll_timeout = 1
+
+# Expiration timeout in seconds of a name service record about existing target
+# ( < 0 means no timeout). (integer value)
+#zmq_target_expire = 120
+
+# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
+# value)
+#use_pub_sub = true
+
+# Minimal port number for random ports range. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#rpc_zmq_min_port = 49152
+
+# Maximal port number for random ports range. (integer value)
+# Minimum value: 1
+# Maximum value: 65536
+#rpc_zmq_max_port = 65536
+
+# Number of retries to find free port number before fail with ZMQBindError.
+# (integer value)
+#rpc_zmq_bind_port_retries = 100
+
+# Size of executor thread pool. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
+#executor_thread_pool_size = 64
+executor_thread_pool_size = 70
+
+# Seconds to wait for a response from a call. (integer value)
+#rpc_response_timeout = 60
+rpc_response_timeout=60
+
+# A URL representing the messaging driver to use and its full configuration. If
+# not set, we fall back to the rpc_backend option and driver specific
+# configuration. (string value)
+#transport_url = <None>
+{%- if neutron.message_queue.members is defined %}
+transport_url = rabbit://{% for member in neutron.message_queue.members -%}
+ {{ neutron.message_queue.user }}:{{ neutron.message_queue.password }}@{{ member.host }}:{{ member.get('port', 5672) }}
+ {%- if not loop.last -%},{%- endif -%}
+ {%- endfor -%}
+ /{{ neutron.message_queue.virtual_host }}
+{%- else %}
+transport_url = rabbit://{{ neutron.message_queue.user }}:{{ neutron.message_queue.password }}@{{ neutron.message_queue.host }}:{{ neutron.message_queue.port }}{{ neutron.message_queue.virtual_host }}
+{%- endif %}
+
+# The messaging driver to use, defaults to rabbit. Other drivers include amqp
+# and zmq. (string value)
+#rpc_backend = rabbit
+rpc_backend = rabbit
+
+# The default exchange under which topics are scoped. May be overridden by an
+# exchange name specified in the transport_url option. (string value)
+#control_exchange = neutron
+
+#
+# From oslo.service.wsgi
+#
+
+# File name for the paste.deploy config for api service (string value)
+#api_paste_config = api-paste.ini
+
+# A python format string that is used as the template to generate log lines.
+# The following values can beformatted into it: client_ip, date_time,
+# request_line, status_code, body_length, wall_seconds. (string value)
+#wsgi_log_format = %(client_ip)s "%(request_line)s" status: %(status_code)s len: %(body_length)s time: %(wall_seconds).7f
+
+# Sets the value of TCP_KEEPIDLE in seconds for each server socket. Not
+# supported on OS X. (integer value)
+#tcp_keepidle = 600
+
+# Size of the pool of greenthreads used by wsgi (integer value)
+#wsgi_default_pool_size = 1000
+
+# Maximum line size of message headers to be accepted. max_header_line may need
+# to be increased when using large tokens (typically those generated by the
+# Keystone v3 API with big service catalogs). (integer value)
+#max_header_line = 16384
+
+# If False, closes the client socket connection explicitly. (boolean value)
+#wsgi_keep_alive = true
+
+# Timeout for client connections' socket operations. If an incoming connection
+# is idle for this number of seconds it will be closed. A value of '0' means
+# wait forever. (integer value)
+#client_socket_timeout = 900
+
+[agent]
+
+#
+# From neutron.agent
+#
+
+# Root helper application. Use 'sudo neutron-rootwrap
+# /etc/neutron/rootwrap.conf' to use the real root filter facility. Change to
+# 'sudo' to skip the filtering and just run the command directly. (string
+# value)
+root_helper = sudo /usr/bin/neutron-rootwrap /etc/neutron/rootwrap.conf
+
+# Use the root helper when listing the namespaces on a system. This may not be
+# required depending on the security configuration. If the root helper is not
+# required, set this to False for a performance improvement. (boolean value)
+#use_helper_for_ns_read = true
+
+# Root helper daemon application to use when possible. (string value)
+#root_helper_daemon = <None>
+
+# Seconds between nodes reporting state to server; should be less than
+# agent_down_time, best if it is half or less than agent_down_time. (floating
+# point value)
+#report_interval = 30
+report_interval = 10
+
+# Log agent heartbeats (boolean value)
+#log_agent_heartbeats = false
+
+# Add comments to iptables rules. Set to false to disallow the addition of
+# comments to generated iptables rules that describe each rule's purpose.
+# System must support the iptables comments module for addition of comments.
+# (boolean value)
+#comment_iptables_rules = true
+
+# Action to be executed when a child process dies (string value)
+# Allowed values: respawn, exit
+#check_child_processes_action = respawn
+
+# Interval between checks of child process liveness (seconds), use 0 to disable
+# (integer value)
+#check_child_processes_interval = 60
+
+# Availability zone of this node (string value)
+availability_zone = {{ neutron.availability_zone|default('nova') }}
+
+
+[cors]
+
+#
+# From oslo.middleware.cors
+#
+
+# Indicate whether this resource may be shared with the domain received in the
+# requests "origin" header. (list value)
+#allowed_origin = <None>
+
+# Indicate that the actual request can include user credentials (boolean value)
+#allow_credentials = true
+
+# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
+# Headers. (list value)
+#expose_headers = X-Auth-Token,X-Subject-Token,X-Service-Token,X-OpenStack-Request-ID,OpenStack-Volume-microversion
+
+# Maximum cache age of CORS preflight requests. (integer value)
+#max_age = 3600
+
+# Indicate which methods can be used during the actual request. (list value)
+#allow_methods = GET,PUT,POST,DELETE,PATCH
+
+# Indicate which header field names may be used during the actual request.
+# (list value)
+#allow_headers = X-Auth-Token,X-Identity-Status,X-Roles,X-Service-Catalog,X-User-Id,X-Tenant-Id,X-OpenStack-Request-ID
+
+
+[cors.subdomain]
+
+#
+# From oslo.middleware.cors
+#
+
+# Indicate whether this resource may be shared with the domain received in the
+# requests "origin" header. (list value)
+#allowed_origin = <None>
+
+# Indicate that the actual request can include user credentials (boolean value)
+#allow_credentials = true
+
+# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
+# Headers. (list value)
+#expose_headers = X-Auth-Token,X-Subject-Token,X-Service-Token,X-OpenStack-Request-ID,OpenStack-Volume-microversion
+
+# Maximum cache age of CORS preflight requests. (integer value)
+#max_age = 3600
+
+# Indicate which methods can be used during the actual request. (list value)
+#allow_methods = GET,PUT,POST,DELETE,PATCH
+
+# Indicate which header field names may be used during the actual request.
+# (list value)
+#allow_headers = X-Auth-Token,X-Identity-Status,X-Roles,X-Service-Catalog,X-User-Id,X-Tenant-Id,X-OpenStack-Request-ID
+
+
+[database]
+
+#
+# From neutron.db
+#
+
+# Database engine for which script will be generated when using offline
+# migration. (string value)
+#engine =
+
+#
+# From oslo.db
+#
+
+# The file name to use with SQLite. (string value)
+# Deprecated group/name - [DEFAULT]/sqlite_db
+#sqlite_db = oslo.sqlite
+
+# If True, SQLite uses synchronous mode. (boolean value)
+# Deprecated group/name - [DEFAULT]/sqlite_synchronous
+#sqlite_synchronous = true
+
+# The back end to use for the database. (string value)
+# Deprecated group/name - [DEFAULT]/db_backend
+#backend = sqlalchemy
+
+# The SQLAlchemy connection string to use to connect to the database. (string
+# value)
+# Deprecated group/name - [DEFAULT]/sql_connection
+# Deprecated group/name - [DATABASE]/sql_connection
+# Deprecated group/name - [sql]/connection
+
+# The SQLAlchemy connection string to use to connect to the slave database.
+# (string value)
+#slave_connection = <None>
+
+# The SQL mode to be used for MySQL sessions. This option, including the
+# default, overrides any server-set SQL mode. To use whatever SQL mode is set
+# by the server configuration, set this to no value. Example: mysql_sql_mode=
+# (string value)
+#mysql_sql_mode = TRADITIONAL
+
+# Timeout before idle SQL connections are reaped. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_idle_timeout
+# Deprecated group/name - [DATABASE]/sql_idle_timeout
+# Deprecated group/name - [sql]/idle_timeout
+#idle_timeout = 3600
+
+# Minimum number of SQL connections to keep open in a pool. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_min_pool_size
+# Deprecated group/name - [DATABASE]/sql_min_pool_size
+#min_pool_size = 1
+
+# Maximum number of SQL connections to keep open in a pool. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_max_pool_size
+# Deprecated group/name - [DATABASE]/sql_max_pool_size
+#max_pool_size = <None>
+
+# Maximum number of database connection retries during startup. Set to -1 to
+# specify an infinite retry count. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_max_retries
+# Deprecated group/name - [DATABASE]/sql_max_retries
+#max_retries = 10
+
+# Interval between retries of opening a SQL connection. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_retry_interval
+# Deprecated group/name - [DATABASE]/reconnect_interval
+#retry_interval = 10
+
+# If set, use this value for max_overflow with SQLAlchemy. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_max_overflow
+# Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
+#max_overflow = 50
+
+# Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
+# value)
+# Deprecated group/name - [DEFAULT]/sql_connection_debug
+#connection_debug = 0
+
+# Add Python stack traces to SQL as comment strings. (boolean value)
+# Deprecated group/name - [DEFAULT]/sql_connection_trace
+#connection_trace = false
+
+# If set, use this value for pool_timeout with SQLAlchemy. (integer value)
+# Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
+#pool_timeout = <None>
+
+# Enable the experimental use of database reconnect on connection lost.
+# (boolean value)
+#use_db_reconnect = false
+
+# Seconds between retries of a database transaction. (integer value)
+#db_retry_interval = 1
+
+# If True, increases the interval between retries of a database operation up to
+# db_max_retry_interval. (boolean value)
+#db_inc_retry_interval = true
+
+# If db_inc_retry_interval is set, the maximum seconds between retries of a
+# database operation. (integer value)
+#db_max_retry_interval = 10
+
+# Maximum retries in case of connection error or deadlock error before error is
+# raised. Set to -1 to specify an infinite retry count. (integer value)
+#db_max_retries = 20
+
+
+[keystone_authtoken]
+
+#
+# From keystonemiddleware.auth_token
+#
+
+# Complete public Identity API endpoint. (string value)
+#auth_uri = <None>
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+# Do not handle authorization requests within the middleware, but delegate the
+# authorization decision to downstream WSGI components. (boolean value)
+#delay_auth_decision = false
+
+# Request timeout value for communicating with Identity API server. (integer
+# value)
+#http_connect_timeout = <None>
+
+# How many times are we trying to reconnect when communicating with Identity
+# API Server. (integer value)
+#http_request_max_retries = 3
+
+# Env key for the swift cache. (string value)
+#cache = <None>
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# The region in which the identity server can be found. (string value)
+#region_name = <None>
+
+# Directory used to cache files related to PKI tokens. (string value)
+#signing_dir = <None>
+
+# Optionally specify a list of memcached server(s) to use for caching. If left
+# undefined, tokens will instead be cached in-process. (list value)
+# Deprecated group/name - [DEFAULT]/memcache_servers
+#memcached_servers = <None>
+
+# In order to prevent excessive effort spent validating tokens, the middleware
+# caches previously-seen tokens for a configurable duration (in seconds). Set
+# to -1 to disable caching completely. (integer value)
+#token_cache_time = 300
+
+# Determines the frequency at which the list of revoked tokens is retrieved
+# from the Identity service (in seconds). A high number of revocation events
+# combined with a low cache duration may significantly reduce performance.
+# (integer value)
+#revocation_cache_time = 10
+
+# (Optional) If defined, indicate whether token data should be authenticated or
+# authenticated and encrypted. If MAC, token data is authenticated (with HMAC)
+# in the cache. If ENCRYPT, token data is encrypted and authenticated in the
+# cache. If the value is not one of these options or empty, auth_token will
+# raise an exception on initialization. (string value)
+# Allowed values: None, MAC, ENCRYPT
+#memcache_security_strategy = None
+
+# (Optional, mandatory if memcache_security_strategy is defined) This string is
+# used for key derivation. (string value)
+#memcache_secret_key = <None>
+
+# (Optional) Number of seconds memcached server is considered dead before it is
+# tried again. (integer value)
+#memcache_pool_dead_retry = 300
+
+# (Optional) Maximum total number of open connections to every memcached
+# server. (integer value)
+#memcache_pool_maxsize = 10
+
+# (Optional) Socket timeout in seconds for communicating with a memcached
+# server. (integer value)
+#memcache_pool_socket_timeout = 3
+
+# (Optional) Number of seconds a connection to memcached is held unused in the
+# pool before it is closed. (integer value)
+#memcache_pool_unused_timeout = 60
+
+# (Optional) Number of seconds that an operation will wait to get a memcached
+# client connection from the pool. (integer value)
+#memcache_pool_conn_get_timeout = 10
+
+# (Optional) Use the advanced (eventlet safe) memcached client pool. The
+# advanced pool will only work under python 2.x. (boolean value)
+#memcache_use_advanced_pool = false
+
+# (Optional) Indicate whether to set the X-Service-Catalog header. If False,
+# middleware will not ask for service catalog on token validation and will not
+# set the X-Service-Catalog header. (boolean value)
+#include_service_catalog = true
+
+# Used to control the use and type of token binding. Can be set to: "disabled"
+# to not check token binding. "permissive" (default) to validate binding
+# information if the bind type is of a form known to the server and ignore it
+# if not. "strict" like "permissive" but if the bind type is unknown the token
+# will be rejected. "required" any form of token binding is needed to be
+# allowed. Finally the name of a binding method that must be present in tokens.
+# (string value)
+#enforce_token_bind = permissive
+
+# If true, the revocation list will be checked for cached tokens. This requires
+# that PKI tokens are configured on the identity server. (boolean value)
+#check_revocations_for_cached = false
+
+# Hash algorithms to use for hashing PKI tokens. This may be a single algorithm
+# or multiple. The algorithms are those supported by Python standard
+# hashlib.new(). The hashes will be tried in the order given, so put the
+# preferred one first for performance. The result of the first hash will be
+# stored in the cache. This will typically be set to multiple values only while
+# migrating from a less secure algorithm to a more secure one. Once all the old
+# tokens are expired this option should be set to a single value for better
+# performance. (list value)
+#hash_algorithms = md5
+
+# Prefix to prepend at the beginning of the path. Deprecated, use identity_uri.
+# (string value)
+#auth_admin_prefix =
+
+# Host providing the admin Identity API endpoint. Deprecated, use identity_uri.
+# (string value)
+#auth_host = 127.0.0.1
+
+# Port of the admin Identity API endpoint. Deprecated, use identity_uri.
+# (integer value)
+#auth_port = 35357
+
+# Protocol of the admin Identity API endpoint. Deprecated, use identity_uri.
+# (string value)
+# Allowed values: http, https
+#auth_protocol = https
+
+# Complete admin Identity API endpoint. This should specify the unversioned
+# root endpoint e.g. https://localhost:35357/ (string value)
+#identity_uri = <None>
+
+# This option is deprecated and may be removed in a future release. Single
+# shared secret with the Keystone configuration used for bootstrapping a
+# Keystone installation, or otherwise bypassing the normal authentication
+# process. This option should not be used, use `admin_user` and
+# `admin_password` instead. (string value)
+#admin_token = <None>
+
+# Service username. (string value)
+#admin_user = <None>
+
+# Service user password. (string value)
+#admin_password = <None>
+
+# Service tenant name. (string value)
+#admin_tenant_name = admin
+
+# Authentication type to load (unknown value)
+# Deprecated group/name - [DEFAULT]/auth_plugin
+#auth_type = <None>
+
+# Config Section from which to load plugin specific options (unknown value)
+#auth_section = <None>
+
+
+[matchmaker_redis]
+
+#
+# From oslo.messaging
+#
+
+# Host to locate redis. (string value)
+#host = 127.0.0.1
+
+# Use this port to connect to redis host. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#port = 6379
+
+# Password for Redis server (optional). (string value)
+#password =
+
+# List of Redis Sentinel hosts (fault tolerance mode) e.g.
+# [host:port, host1:port ... ] (list value)
+#sentinel_hosts =
+
+# Redis replica set name. (string value)
+#sentinel_group_name = oslo-messaging-zeromq
+
+# Time in ms to wait between connection attempts. (integer value)
+#wait_timeout = 500
+
+# Time in ms to wait before the transaction is killed. (integer value)
+#check_timeout = 20000
+
+# Timeout in ms on blocking socket operations (integer value)
+#socket_timeout = 1000
+
+
+[nova]
+
+#
+# From neutron
+#
+
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+
+# Type of the nova endpoint to use. This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Allowed values: public, admin, internal
+#endpoint_type = public
+
+#
+# From nova.auth
+#
+
+# Authentication URL (unknown value)
+#auth_url = <None>
+
+# Authentication type to load (unknown value)
+# Deprecated group/name - [DEFAULT]/auth_plugin
+#auth_type = <None>
+
+# PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# (string value)
+#cafile = <None>
+
+# PEM encoded client certificate cert file (string value)
+#certfile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (unknown
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used
+# for both the user and project domain in v3 and ignored in v2 authentication.
+# (unknown value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (unknown value)
+#domain_id = <None>
+
+# Domain name to scope to (unknown value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# PEM encoded client certificate key file (string value)
+#keyfile = <None>
+
+# User's password (unknown value)
+#password = <None>
+
+# Domain ID containing project (unknown value)
+#project_domain_id = <None>
+
+# Domain name containing project (unknown value)
+#project_domain_name = <None>
+
+# Project ID to scope to (unknown value)
+# Deprecated group/name - [DEFAULT]/tenant-id
+#project_id = <None>
+
+# Project name to scope to (unknown value)
+# Deprecated group/name - [DEFAULT]/tenant-name
+#project_name = <None>
+
+# Tenant ID (unknown value)
+#tenant_id = <None>
+
+# Tenant Name (unknown value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (unknown value)
+#trust_id = <None>
+
+# User's domain id (unknown value)
+#user_domain_id = <None>
+
+# User's domain name (unknown value)
+#user_domain_name = <None>
+
+# User id (unknown value)
+#user_id = <None>
+
+# Username (unknown value)
+# Deprecated group/name - [DEFAULT]/username
+#username = <None>
+
+
+[oslo_concurrency]
+
+#
+# From oslo.concurrency
+#
+
+# Enables or disables inter-process locks. (boolean value)
+# Deprecated group/name - [DEFAULT]/disable_process_locking
+#disable_process_locking = false
+
+# Directory to use for lock files. For security, the specified directory
+# should only be writable by the user running the processes that need locking.
+# Defaults to environment variable OSLO_LOCK_PATH. If OSLO_LOCK_PATH is not set
+# in the environment, use the Python tempfile.gettempdir function to find a
+# suitable location. If external locks are used, a lock path must be set.
+# (string value)
+# Deprecated group/name - [DEFAULT]/lock_path
+#lock_path = /tmp
+lock_path = $state_path/lock
+
+[oslo_messaging_amqp]
+
+#
+# From oslo.messaging
+#
+
+# address prefix used when sending to a specific server (string value)
+# Deprecated group/name - [amqp1]/server_request_prefix
+#server_request_prefix = exclusive
+
+# address prefix used when broadcasting to all servers (string value)
+# Deprecated group/name - [amqp1]/broadcast_prefix
+#broadcast_prefix = broadcast
+
+# address prefix when sending to any server in group (string value)
+# Deprecated group/name - [amqp1]/group_request_prefix
+#group_request_prefix = unicast
+
+# Name for the AMQP container (string value)
+# Deprecated group/name - [amqp1]/container_name
+#container_name = <None>
+
+# Timeout for inactive connections (in seconds) (integer value)
+# Deprecated group/name - [amqp1]/idle_timeout
+#idle_timeout = 0
+
+# Debug: dump AMQP frames to stdout (boolean value)
+# Deprecated group/name - [amqp1]/trace
+#trace = false
+
+# CA certificate PEM file to verify server certificate (string value)
+# Deprecated group/name - [amqp1]/ssl_ca_file
+#ssl_ca_file =
+
+# Identifying certificate PEM file to present to clients (string value)
+# Deprecated group/name - [amqp1]/ssl_cert_file
+#ssl_cert_file =
+
+# Private key PEM file used to sign cert_file certificate (string value)
+# Deprecated group/name - [amqp1]/ssl_key_file
+#ssl_key_file =
+
+# Password for decrypting ssl_key_file (if encrypted) (string value)
+# Deprecated group/name - [amqp1]/ssl_key_password
+#ssl_key_password = <None>
+
+# Accept clients using either SSL or plain TCP (boolean value)
+# Deprecated group/name - [amqp1]/allow_insecure_clients
+#allow_insecure_clients = false
+
+# Space separated list of acceptable SASL mechanisms (string value)
+# Deprecated group/name - [amqp1]/sasl_mechanisms
+#sasl_mechanisms =
+
+# Path to directory that contains the SASL configuration (string value)
+# Deprecated group/name - [amqp1]/sasl_config_dir
+#sasl_config_dir =
+
+# Name of configuration file (without .conf suffix) (string value)
+# Deprecated group/name - [amqp1]/sasl_config_name
+#sasl_config_name =
+
+# User name for message broker authentication (string value)
+# Deprecated group/name - [amqp1]/username
+#username =
+
+# Password for message broker authentication (string value)
+# Deprecated group/name - [amqp1]/password
+#password =
+
+
+[oslo_messaging_notifications]
+
+#
+# From oslo.messaging
+#
+
+# The Drivers(s) to handle sending notifications. Possible values are
+# messaging, messagingv2, routing, log, test, noop (multi valued)
+# Deprecated group/name - [DEFAULT]/notification_driver
+#driver =
+{%- if neutron.notification is mapping %}
+driver = {{ neutron.notification.get('driver', 'messagingv2') }}
+{%- if neutron.notification.topics is defined %}
+topics = {{ neutron.notification.topics }}
+{%- endif %}
+{%- elif neutron.get('notification', False) %}
+driver = messagingv2
+{%- endif %}
+
+# A URL representing the messaging driver to use for notifications. If not set,
+# we fall back to the same configuration used for RPC. (string value)
+# Deprecated group/name - [DEFAULT]/notification_transport_url
+#transport_url = <None>
+
+# AMQP topic used for OpenStack notifications. (list value)
+# Deprecated group/name - [rpc_notifier2]/topics
+# Deprecated group/name - [DEFAULT]/notification_topics
+#topics = notifications
+
+
+[oslo_messaging_rabbit]
+
+#
+# From oslo.messaging
+#
+
+# Use durable queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/amqp_durable_queues
+# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
+#amqp_durable_queues = false
+
+# Auto-delete queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/amqp_auto_delete
+#amqp_auto_delete = false
+
+# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
+# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
+# distributions. (string value)
+# Deprecated group/name - [DEFAULT]/kombu_ssl_version
+#kombu_ssl_version =
+
+# SSL key file (valid only if SSL enabled). (string value)
+# Deprecated group/name - [DEFAULT]/kombu_ssl_keyfile
+#kombu_ssl_keyfile =
+
+# SSL cert file (valid only if SSL enabled). (string value)
+# Deprecated group/name - [DEFAULT]/kombu_ssl_certfile
+#kombu_ssl_certfile =
+
+# SSL certification authority file (valid only if SSL enabled). (string value)
+# Deprecated group/name - [DEFAULT]/kombu_ssl_ca_certs
+#kombu_ssl_ca_certs =
+
+# How long to wait before reconnecting in response to an AMQP consumer cancel
+# notification. (floating point value)
+# Deprecated group/name - [DEFAULT]/kombu_reconnect_delay
+#kombu_reconnect_delay = 1.0
+
+# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not
+# be used. This option may notbe available in future versions. (string value)
+#kombu_compression = <None>
+
+# How long to wait a missing client beforce abandoning to send it its replies.
+# This value should not be longer than rpc_response_timeout. (integer value)
+# Deprecated group/name - [DEFAULT]/kombu_reconnect_timeout
+#kombu_missing_consumer_retry_timeout = 60
+
+# Determines how the next RabbitMQ node is chosen in case the one we are
+# currently connected to becomes unavailable. Takes effect only if more than
+# one RabbitMQ node is provided in config. (string value)
+# Allowed values: round-robin, shuffle
+#kombu_failover_strategy = round-robin
+
+# The RabbitMQ broker address where a single node is used. (string value)
+# Deprecated group/name - [DEFAULT]/rabbit_host
+#rabbit_host = localhost
+
+# The RabbitMQ broker port where a single node is used. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+# Deprecated group/name - [DEFAULT]/rabbit_port
+#rabbit_port = 5672
+
+# RabbitMQ HA cluster host:port pairs. (list value)
+# Deprecated group/name - [DEFAULT]/rabbit_hosts
+#rabbit_hosts = $rabbit_host:$rabbit_port
+#
+
+# Connect over SSL for RabbitMQ. (boolean value)
+# Deprecated group/name - [DEFAULT]/rabbit_use_ssl
+#rabbit_use_ssl = false
+
+# The RabbitMQ userid. (string value)
+# Deprecated group/name - [DEFAULT]/rabbit_userid
+#rabbit_userid = guest
+
+# The RabbitMQ password. (string value)
+# Deprecated group/name - [DEFAULT]/rabbit_password
+#rabbit_password = guest
+
+# The RabbitMQ login method. (string value)
+# Deprecated group/name - [DEFAULT]/rabbit_login_method
+#rabbit_login_method = AMQPLAIN
+
+# The RabbitMQ virtual host. (string value)
+# Deprecated group/name - [DEFAULT]/rabbit_virtual_host
+#rabbit_virtual_host = /
+
+# How frequently to retry connecting with RabbitMQ. (integer value)
+#rabbit_retry_interval = 1
+rabbit_retry_interval = 1
+
+# How long to backoff for between retries when connecting to RabbitMQ. (integer
+# value)
+# Deprecated group/name - [DEFAULT]/rabbit_retry_backoff
+#rabbit_retry_backoff = 2
+rabbit_retry_backoff = 2
+
+# Maximum interval of RabbitMQ connection retries. Default is 30 seconds.
+# (integer value)
+#rabbit_interval_max = 30
+
+# Maximum number of RabbitMQ connection retries. Default is 0 (infinite retry
+# count). (integer value)
+# Deprecated group/name - [DEFAULT]/rabbit_max_retries
+#rabbit_max_retries = 0
+rabbit_max_retries = 0
+
+# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this
+# option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring
+# is no longer controlled by the x-ha-policy argument when declaring a queue.
+# If you just want to make sure that all queues (except those with auto-
+# generated names) are mirrored across all nodes, run: "rabbitmqctl set_policy
+# HA '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value)
+# Deprecated group/name - [DEFAULT]/rabbit_ha_queues
+#rabbit_ha_queues = false
+
+# Positive integer representing duration in seconds for queue TTL (x-expires).
+# Queues which are unused for the duration of the TTL are automatically
+# deleted. The parameter affects only reply and fanout queues. (integer value)
+# Minimum value: 1
+#rabbit_transient_queues_ttl = 1800
+
+# Specifies the number of messages to prefetch. Setting to zero allows
+# unlimited messages. (integer value)
+#rabbit_qos_prefetch_count = 0
+
+# Number of seconds after which the Rabbit broker is considered down if
+# heartbeat's keep-alive fails (0 disable the heartbeat). EXPERIMENTAL (integer
+# value)
+#heartbeat_timeout_threshold = 60
+heartbeat_timeout_threshold = 0
+
+# How often times during the heartbeat_timeout_threshold we check the
+# heartbeat. (integer value)
+#heartbeat_rate = 2
+heartbeat_rate = 2
+
+# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake (boolean value)
+# Deprecated group/name - [DEFAULT]/fake_rabbit
+#fake_rabbit = false
+
+# Maximum number of channels to allow (integer value)
+#channel_max = <None>
+
+# The maximum byte size for an AMQP frame (integer value)
+#frame_max = <None>
+
+# How often to send heartbeats for consumer's connections (integer value)
+#heartbeat_interval = 1
+
+# Enable SSL (boolean value)
+#ssl = <None>
+
+# Arguments passed to ssl.wrap_socket (dict value)
+#ssl_options = <None>
+
+# Set socket timeout in seconds for connection's socket (floating point value)
+#socket_timeout = 0.25
+
+# Set TCP_USER_TIMEOUT in seconds for connection's socket (floating point
+# value)
+#tcp_user_timeout = 0.25
+
+# Set delay for reconnection to some host which has connection error (floating
+# point value)
+#host_connection_reconnect_delay = 0.25
+
+# Maximum number of connections to keep queued. (integer value)
+#pool_max_size = 10
+
+# Maximum number of connections to create above `pool_max_size`. (integer
+# value)
+#pool_max_overflow = 0
+
+# Default number of seconds to wait for a connections to available (integer
+# value)
+#pool_timeout = 30
+
+# Lifetime of a connection (since creation) in seconds or None for no
+# recycling. Expired connections are closed on acquire. (integer value)
+#pool_recycle = 600
+
+# Threshold at which inactive (since release) connections are considered stale
+# in seconds or None for no staleness. Stale connections are closed on acquire.
+# (integer value)
+#pool_stale = 60
+
+# Persist notification messages. (boolean value)
+#notification_persistence = false
+
+# Exchange name for for sending notifications (string value)
+#default_notification_exchange = ${control_exchange}_notification
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# notification listener. (integer value)
+#notification_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during sending
+# notification, -1 means infinite retry. (integer value)
+#default_notification_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during sending
+# notification message (floating point value)
+#notification_retry_delay = 0.25
+
+# Time to live for rpc queues without consumers in seconds. (integer value)
+#rpc_queue_expiration = 60
+
+# Exchange name for sending RPC messages (string value)
+#default_rpc_exchange = ${control_exchange}_rpc
+
+# Exchange name for receiving RPC replies (string value)
+#rpc_reply_exchange = ${control_exchange}_rpc_reply
+
+# Max number of not acknowledged message which RabbitMQ can send to rpc
+# listener. (integer value)
+#rpc_listener_prefetch_count = 100
+
+# Max number of not acknowledged message which RabbitMQ can send to rpc reply
+# listener. (integer value)
+#rpc_reply_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during sending
+# reply. -1 means infinite retry during rpc_timeout (integer value)
+#rpc_reply_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during sending
+# reply. (floating point value)
+#rpc_reply_retry_delay = 0.25
+
+# Reconnecting retry count in case of connectivity problem during sending RPC
+# message, -1 means infinite retry. If actual retry attempts in not 0 the rpc
+# request could be processed more then one time (integer value)
+#default_rpc_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during sending RPC
+# message (floating point value)
+#rpc_retry_delay = 0.25
+
+
+[oslo_policy]
+
+#
+# From oslo.policy
+#
+
+# The JSON file that defines policies. (string value)
+# Deprecated group/name - [DEFAULT]/policy_file
+#policy_file = policy.json
+
+# Default rule. Enforced when a requested rule is not found. (string value)
+# Deprecated group/name - [DEFAULT]/policy_default_rule
+#policy_default_rule = default
+
+# Directories where policy configuration files are stored. They can be relative
+# to any directory in the search path defined by the config_dir option, or
+# absolute paths. The file defined by policy_file must exist for these
+# directories to be searched. Missing or empty directories are ignored. (multi
+# valued)
+# Deprecated group/name - [DEFAULT]/policy_dirs
+#policy_dirs = policy.d
+
+
+[quotas]
+
+#
+# From neutron
+#
+
+# Resource name(s) that are supported in quota features. This option is now
+# deprecated for removal. (list value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#quota_items = network,subnet,port
+
+# Default number of resource allowed per tenant. A negative value means
+# unlimited. (integer value)
+#default_quota = -1
+
+# Number of networks allowed per tenant. A negative value means unlimited.
+# (integer value)
+#quota_network = 10
+
+# Number of subnets allowed per tenant, A negative value means unlimited.
+# (integer value)
+#quota_subnet = 10
+
+# Number of ports allowed per tenant. A negative value means unlimited.
+# (integer value)
+#quota_port = 50
+
+# Default driver to use for quota checks (string value)
+#quota_driver = neutron.db.quota.driver.DbQuotaDriver
+
+# Keep in track in the database of current resourcequota usage. Plugins which
+# do not leverage the neutron database should set this flag to False (boolean
+# value)
+#track_quota_usage = true
+
+#
+# From neutron.extensions
+#
+
+# Number of routers allowed per tenant. A negative value means unlimited.
+# (integer value)
+#quota_router = 10
+
+# Number of floating IPs allowed per tenant. A negative value means unlimited.
+# (integer value)
+#quota_floatingip = 50
+
+# Number of security groups allowed per tenant. A negative value means
+# unlimited. (integer value)
+#quota_security_group = 10
+
+# Number of security rules allowed per tenant. A negative value means
+# unlimited. (integer value)
+#quota_security_group_rule = 100
+
+
+[ssl]
+
+#
+# From oslo.service.sslutils
+#
+
+# CA certificate file to use to verify connecting clients. (string value)
+# Deprecated group/name - [DEFAULT]/ssl_ca_file
+#ca_file = <None>
+
+# Certificate file to use when starting the server securely. (string value)
+# Deprecated group/name - [DEFAULT]/ssl_cert_file
+#cert_file = <None>
+
+# Private key file to use when starting the server securely. (string value)
+# Deprecated group/name - [DEFAULT]/ssl_key_file
+#key_file = <None>
+
+# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
+# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
+# distributions. (string value)
+#version = <None>
+
+# Sets the list of available ciphers. value should be a string in the OpenSSL
+# cipher list format. (string value)
+#ciphers = <None>
diff --git a/neutron/files/newton/neutron-server b/neutron/files/newton/neutron-server
new file mode 100644
index 0000000..54f6ceb
--- /dev/null
+++ b/neutron/files/newton/neutron-server
@@ -0,0 +1,16 @@
+# Generated by Salt.
+{%- from "neutron/map.jinja" import server with context %}
+
+# defaults for neutron-server
+
+# path to config file corresponding to the core_plugin specified in
+# neutron.conf
+#NEUTRON_PLUGIN_CONFIG="/etc/neutron/plugins/openvswitch/ovs_neutron_plugin.ini"
+
+{%- if server.backend.engine == "ml2" %}
+NEUTRON_PLUGIN_CONFIG="/etc/neutron/plugins/ml2/ml2_conf.ini"
+{%- endif %}
+
+{%- if server.backend.engine == "contrail" %}
+NEUTRON_PLUGIN_CONFIG="/etc/neutron/plugins/opencontrail/ContrailPlugin.ini"
+{%- endif %}
\ No newline at end of file
diff --git a/neutron/files/newton/neutron-server.conf.Debian b/neutron/files/newton/neutron-server.conf.Debian
new file mode 100644
index 0000000..ccc54f3
--- /dev/null
+++ b/neutron/files/newton/neutron-server.conf.Debian
@@ -0,0 +1,1657 @@
+{%- from "neutron/map.jinja" import server with context %}
+[DEFAULT]
+
+#
+# From neutron
+#
+
+# Where to store Neutron state files. This directory must be writable by the
+# agent. (string value)
+#state_path = /var/lib/neutron
+state_path = /var/lib/neutron
+
+# The host IP to bind to (string value)
+#bind_host = 0.0.0.0
+bind_host = {{ server.bind.address }}
+
+# The port to bind to (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#bind_port = 9696
+bind_port = {{ server.bind.port }}
+
+# The path for API extensions. Note that this can be a colon-separated list of
+# paths. For example: api_extensions_path =
+# extensions:/path/to/more/exts:/even/more/exts. The __path__ of
+# neutron.extensions is appended to this, so if your extensions are in there
+# you don't need to specify them here. (string value)
+
+{% if server.backend.engine == "contrail" %}
+
+# TEMPORARY - until neutron v2 contrail package would be supported
+#api_extensions_path = extensions:/usr/lib/python2.7/dist-packages/neutron_plugin_contrail/extensions:/usr/lib/python2.7/dist-packages/neutron_lbaas/extensions
+api_extensions_path = extensions:/usr/lib/python2.7/dist-packages/neutron_plugin_contrail/extensions
+# The core plugin Neutron will use (string value)
+core_plugin = neutron_plugin_contrail.plugins.opencontrail.contrail_plugin.NeutronPluginContrailCoreV2
+
+# TEMPORARY - until neutron v2 contrail package would be supported
+#service_plugins = neutron_plugin_contrail.plugins.opencontrail.loadbalancer.v2.plugin.LoadBalancerPluginV2
+{% elif server.backend.engine == "ml2" %}
+
+core_plugin = neutron.plugins.ml2.plugin.Ml2Plugin
+
+service_plugins =neutron.services.l3_router.l3_router_plugin.L3RouterPlugin,neutron.services.metering.metering_plugin.MeteringPlugin{%- if server.lbaas is defined -%}
+,neutron_lbaas.services.loadbalancer.plugin.LoadBalancerPluginv2
+{%- endif -%}
+
+{% endif %}
+
+# The type of authentication to use (string value)
+#auth_strategy = keystone
+auth_strategy = keystone
+
+# The service plugins Neutron will use (list value)
+# The base MAC address Neutron will use for VIFs. The first 3 octets will
+# remain unchanged. If the 4th octet is not 00, it will also be used. The
+# others will be randomly generated. (string value)
+#base_mac = fa:16:3e:00:00:00
+
+# How many times Neutron will retry MAC generation (integer value)
+#mac_generation_retries = 16
+mac_generation_retries = 32
+
+# Allow the usage of the bulk API (boolean value)
+#allow_bulk = true
+
+# Allow the usage of the pagination (boolean value)
+{% if server.get('allow_pagination', false) %}
+allow_pagination = True
+{% else %}
+allow_pagination = False
+{% endif %}
+
+# Allow the usage of the sorting (boolean value)
+#allow_sorting = false
+
+# The maximum number of items returned in a single response, value was
+# 'infinite' or negative integer means no limit (string value)
+pagination_max_limit = {{ server.pagination_max_limit|default('-1') }}
+
+# Default value of availability zone hints. The availability zone aware
+# schedulers use this when the resources availability_zone_hints is empty.
+# Multiple availability zones can be specified by a comma separated string.
+# This value can be empty. In this case, even if availability_zone_hints for a
+# resource is empty, availability zone is considered for high availability
+# while scheduling the resource. (list value)
+#default_availability_zones =
+
+# Maximum number of DNS nameservers per subnet (integer value)
+#max_dns_nameservers = 5
+
+# Maximum number of host routes per subnet (integer value)
+#max_subnet_host_routes = 20
+
+# Maximum number of fixed ips per port. This option is deprecated and will be
+# removed in the N release. (integer value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#max_fixed_ips_per_port = 5
+
+# Default IPv4 subnet pool to be used for automatic subnet CIDR allocation.
+# Specifies by UUID the pool to be used in case where creation of a subnet is
+# being called without a subnet pool ID. If not set then no pool will be used
+# unless passed explicitly to the subnet create. If no pool is used, then a
+# CIDR must be passed to create a subnet and that subnet will not be allocated
+# from any pool; it will be considered part of the tenant's private address
+# space. This option is deprecated for removal in the N release. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#default_ipv4_subnet_pool = <None>
+
+# Default IPv6 subnet pool to be used for automatic subnet CIDR allocation.
+# Specifies by UUID the pool to be used in case where creation of a subnet is
+# being called without a subnet pool ID. See the description for
+# default_ipv4_subnet_pool for more information. This option is deprecated for
+# removal in the N release. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#default_ipv6_subnet_pool = <None>
+
+# Enables IPv6 Prefix Delegation for automatic subnet CIDR allocation. Set to
+# True to enable IPv6 Prefix Delegation for subnet allocation in a PD-capable
+# environment. Users making subnet creation requests for IPv6 subnets without
+# providing a CIDR or subnetpool ID will be given a CIDR via the Prefix
+# Delegation mechanism. Note that enabling PD will override the behavior of the
+# default IPv6 subnetpool. (boolean value)
+#ipv6_pd_enabled = false
+
+# DHCP lease duration (in seconds). Use -1 to tell dnsmasq to use infinite
+# lease times. (integer value)
+# Deprecated group/name - [DEFAULT]/dhcp_lease_time
+#dhcp_lease_duration = 86400
+dhcp_lease_duration = 600
+
+# Domain to use for building the hostnames (string value)
+#dns_domain = openstacklocal
+dns_domain = {{ server.dns_domain }}
+
+# Driver for external DNS integration. (string value)
+#external_dns_driver = <None>
+
+# Allow sending resource operation notification to DHCP agent (boolean value)
+#dhcp_agent_notification = true
+
+# Allow overlapping IP support in Neutron. Attention: the following parameter
+# MUST be set to False if Neutron is being used in conjunction with Nova
+# security groups. (boolean value)
+#allow_overlapping_ips = false
+allow_overlapping_ips = True
+
+# Hostname to be used by the Neutron server, agents and services running on
+# this machine. All the agents and services running on this machine must use
+# the same host value. (string value)
+#host = example.domain
+
+# Ensure that configured gateway is on subnet. For IPv6, validate only if
+# gateway is not a link local address. Deprecated, to be removed during the
+# Newton release, at which point the gateway will not be forced on to subnet.
+# (boolean value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#force_gateway_on_subnet = true
+
+# Send notification to nova when port status changes (boolean value)
+#notify_nova_on_port_status_changes = true
+notify_nova_on_port_status_changes = True
+
+# Send notification to nova when port data (fixed_ips/floatingip) changes so
+# nova can update its cache. (boolean value)
+#notify_nova_on_port_data_changes = true
+notify_nova_on_port_data_changes = True
+
+# Number of seconds between sending events to nova if there are any events to
+# send. (integer value)
+#send_events_interval = 2
+
+# If True, advertise network MTU values if core plugin calculates them. MTU is
+# advertised to running instances via DHCP and RA MTU options. (boolean value)
+#advertise_mtu = true
+advertise_mtu = True
+
+# Neutron IPAM (IP address management) driver to use. If ipam_driver is not set
+# (default behavior), no IPAM driver is used. In order to use the reference
+# implementation of Neutron IPAM driver, use 'internal'. (string value)
+#ipam_driver = <None>
+
+# If True, then allow plugins that support it to create VLAN transparent
+# networks. (boolean value)
+#vlan_transparent = false
+
+# This will choose the web framework in which to run the Neutron API server.
+# 'pecan' is a new experiemental rewrite of the API server. (string value)
+# Allowed values: legacy, pecan
+#web_framework = legacy
+
+# MTU of the underlying physical network. Neutron uses this value to calculate
+# MTU for all virtual network components. For flat and VLAN networks, neutron
+# uses this value without modification. For overlay networks such as VXLAN,
+# neutron automatically subtracts the overlay protocol overhead from this
+# value. Defaults to 1500, the standard value for Ethernet. (integer value)
+# Deprecated group/name - [ml2]/segment_mtu
+#global_physnet_mtu = 1500
+global_physnet_mtu = {{ server.get('global_physnet_mtu', '1500') }}
+
+# Number of backlog requests to configure the socket with (integer value)
+#backlog = 4096
+
+# Number of seconds to keep retrying to listen (integer value)
+#retry_until_window = 30
+
+# Enable SSL on the API server (boolean value)
+#use_ssl = false
+
+# Seconds between running periodic tasks (integer value)
+#periodic_interval = 40
+
+# Number of separate API worker processes for service. If not specified, the
+# default is equal to the number of CPUs available for best performance.
+# (integer value)
+#api_workers = <None>
+
+# Number of RPC worker processes for service (integer value)
+#rpc_workers = 1
+
+# Number of RPC worker processes dedicated to state reports queue (integer
+# value)
+#rpc_state_report_workers = 1
+
+# Range of seconds to randomly delay when starting the periodic task scheduler
+# to reduce stampeding. (Disable by setting to 0) (integer value)
+#periodic_fuzzy_delay = 5
+
+#
+# From neutron.agent
+#
+
+# The driver used to manage the virtual interface. (string value)
+#interface_driver = <None>
+
+# Location for Metadata Proxy UNIX domain socket. (string value)
+#metadata_proxy_socket = $state_path/metadata_proxy
+
+# User (uid or name) running metadata proxy after its initialization (if empty:
+# agent effective user). (string value)
+#metadata_proxy_user =
+
+# Group (gid or name) running metadata proxy after its initialization (if
+# empty: agent effective group). (string value)
+#metadata_proxy_group =
+
+# Enable/Disable log watch by metadata proxy. It should be disabled when
+# metadata_proxy_user/group is not allowed to read/write its log file and
+# copytruncate logrotate option must be used if logrotate is enabled on
+# metadata proxy log files. Option default value is deduced from
+# metadata_proxy_user: watch log is enabled if metadata_proxy_user is agent
+# effective user id/name. (boolean value)
+#metadata_proxy_watch_log = <None>
+
+#
+# From neutron.db
+#
+
+# Seconds to regard the agent is down; should be at least twice
+# report_interval, to be sure the agent is down for good. (integer value)
+#agent_down_time = 75
+agent_down_time = 30
+
+# Representing the resource type whose load is being reported by the agent.
+# This can be "networks", "subnets" or "ports". When specified (Default is
+# networks), the server will extract particular load sent as part of its agent
+# configuration object from the agent report state, which is the number of
+# resources being consumed, at every report_interval.dhcp_load_type can be used
+# in combination with network_scheduler_driver =
+# neutron.scheduler.dhcp_agent_scheduler.WeightScheduler When the
+# network_scheduler_driver is WeightScheduler, dhcp_load_type can be configured
+# to represent the choice for the resource being balanced. Example:
+# dhcp_load_type=networks (string value)
+# Allowed values: networks, subnets, ports
+#dhcp_load_type = networks
+
+# Agent starts with admin_state_up=False when enable_new_agents=False. In the
+# case, user's resources will not be scheduled automatically to the agent until
+# admin changes admin_state_up to True. (boolean value)
+#enable_new_agents = true
+
+# Maximum number of routes per router (integer value)
+#max_routes = 30
+
+# Define the default value of enable_snat if not provided in
+# external_gateway_info. (boolean value)
+#enable_snat_by_default = true
+
+# Driver to use for scheduling network to DHCP agent (string value)
+#network_scheduler_driver = neutron.scheduler.dhcp_agent_scheduler.WeightScheduler
+
+# Allow auto scheduling networks to DHCP agent. (boolean value)
+#network_auto_schedule = true
+
+# Automatically remove networks from offline DHCP agents. (boolean value)
+#allow_automatic_dhcp_failover = true
+
+# Number of DHCP agents scheduled to host a tenant network. If this number is
+# greater than 1, the scheduler automatically assigns multiple DHCP agents for
+# a given tenant network, providing high availability for DHCP service.
+# (integer value)
+#dhcp_agents_per_network = 1
+dhcp_agents_per_network = 2
+
+# Enable services on an agent with admin_state_up False. If this option is
+# False, when admin_state_up of an agent is turned False, services on it will
+# be disabled. Agents with admin_state_up False are not selected for automatic
+# scheduling regardless of this option. But manual scheduling to such agents is
+# available if this option is True. (boolean value)
+#enable_services_on_agents_with_admin_state_down = false
+
+# The base mac address used for unique DVR instances by Neutron. The first 3
+# octets will remain unchanged. If the 4th octet is not 00, it will also be
+# used. The others will be randomly generated. The 'dvr_base_mac' *must* be
+# different from 'base_mac' to avoid mixing them up with MAC's allocated for
+# tenant ports. A 4 octet example would be dvr_base_mac = fa:16:3f:4f:00:00.
+# The default is 3 octet (string value)
+#dvr_base_mac = fa:16:3f:00:00:00
+
+# System-wide flag to determine the type of router that tenants can create.
+# Only admin can override. (boolean value)
+#router_distributed = false
+router_distributed = {{ server.get('dvr', 'False') }}
+
+# Driver to use for scheduling router to a default L3 agent (string value)
+#router_scheduler_driver = neutron.scheduler.l3_agent_scheduler.LeastRoutersScheduler
+router_scheduler_driver = neutron.scheduler.l3_agent_scheduler.ChanceScheduler
+
+# Allow auto scheduling of routers to L3 agent. (boolean value)
+#router_auto_schedule = true
+
+# Automatically reschedule routers from offline L3 agents to online L3 agents.
+# (boolean value)
+#allow_automatic_l3agent_failover = false
+
+# Enable HA mode for virtual routers. (boolean value)
+#l3_ha = false
+l3_ha = {{ server.get('l3_ha', 'False') }}
+
+# Maximum number of L3 agents which a HA router will be scheduled on. If it is
+# set to 0 then the router will be scheduled on every agent. (integer value)
+#max_l3_agents_per_router = 3
+
+# Minimum number of L3 agents which a HA router will be scheduled on. If it is
+# set to 0 then the router will be scheduled on every agent. (integer value)
+#min_l3_agents_per_router = 2
+
+# Subnet used for the l3 HA admin network. (string value)
+#l3_ha_net_cidr = 169.254.192.0/18
+
+# The network type to use when creating the HA network for an HA router. By
+# default or if empty, the first 'tenant_network_types' is used. This is
+# helpful when the VRRP traffic should use a specific network which is not the
+# default one. (string value)
+#l3_ha_network_type =
+
+# The physical network name with which the HA network can be created. (string
+# value)
+#l3_ha_network_physical_name =
+
+#
+# From neutron.extensions
+#
+
+# Maximum number of allowed address pairs (integer value)
+#max_allowed_address_pair = 10
+
+#
+# From neutron.qos
+#
+
+# Drivers list to use to send the update notification (list value)
+#notification_drivers = m,e,s,s,a,g,e,_,q,u,e,u,e
+
+#
+# From oslo.log
+#
+
+# If set to true, the logging level will be set to DEBUG instead of the default
+# INFO level. (boolean value)
+#debug = false
+
+# If set to false, the logging level will be set to WARNING instead of the
+# default INFO level. (boolean value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#verbose = true
+verbose = true
+
+# The name of a logging configuration file. This file is appended to any
+# existing logging configuration files. For details about logging configuration
+# files, see the Python logging module documentation. Note that when logging
+# configuration files are used then all logging configuration is set in the
+# configuration file and other logging configuration options are ignored (for
+# example, logging_context_format_string). (string value)
+# Deprecated group/name - [DEFAULT]/log_config
+#log_config_append = <None>
+
+# Defines the format string for %%(asctime)s in log records. Default:
+# %(default)s . This option is ignored if log_config_append is set. (string
+# value)
+#log_date_format = %Y-%m-%d %H:%M:%S
+
+# (Optional) Name of log file to send logging output to. If no default is set,
+# logging will go to stderr as defined by use_stderr. This option is ignored if
+# log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logfile
+#log_file = <None>
+
+# (Optional) The base directory used for relative log_file paths. This option
+# is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logdir
+#log_dir = <None>
+
+# Uses logging handler designed to watch file system. When log file is moved or
+# removed this handler will open a new log file with specified path
+# instantaneously. It makes sense only if log_file option is specified and
+# Linux platform is used. This option is ignored if log_config_append is set.
+# (boolean value)
+#watch_log_file = false
+
+# Use syslog for logging. Existing syslog format is DEPRECATED and will be
+# changed later to honor RFC5424. This option is ignored if log_config_append
+# is set. (boolean value)
+#use_syslog = false
+
+# Syslog facility to receive log lines. This option is ignored if
+# log_config_append is set. (string value)
+#syslog_log_facility = LOG_USER
+
+# Log output to standard error. This option is ignored if log_config_append is
+# set. (boolean value)
+#use_stderr = true
+
+# Format string to use for log messages with context. (string value)
+#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
+
+# Format string to use for log messages when context is undefined. (string
+# value)
+#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
+
+# Additional data to append to log message when logging level for the message
+# is DEBUG. (string value)
+#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
+
+# Prefix each line of exception output with this format. (string value)
+#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
+
+# Defines the format string for %(user_identity)s that is used in
+# logging_context_format_string. (string value)
+#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
+
+# List of package logging levels in logger=LEVEL pairs. This option is ignored
+# if log_config_append is set. (list value)
+#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
+
+# Enables or disables publication of error events. (boolean value)
+#publish_errors = false
+
+# The format for an instance that is passed with the log message. (string
+# value)
+#instance_format = "[instance: %(uuid)s] "
+
+# The format for an instance UUID that is passed with the log message. (string
+# value)
+#instance_uuid_format = "[instance: %(uuid)s] "
+
+# Enables or disables fatal status of deprecations. (boolean value)
+#fatal_deprecations = false
+
+#
+# From oslo.messaging
+#
+
+# Size of RPC connection pool. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_conn_pool_size
+#rpc_conn_pool_size = 30
+
+# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
+# The "host" option should point or resolve to this address. (string value)
+#rpc_zmq_bind_address = *
+
+# MatchMaker driver. (string value)
+# Allowed values: redis, dummy
+#rpc_zmq_matchmaker = redis
+
+# Type of concurrency used. Either "native" or "eventlet" (string value)
+#rpc_zmq_concurrency = eventlet
+
+# Number of ZeroMQ contexts, defaults to 1. (integer value)
+#rpc_zmq_contexts = 1
+
+# Maximum number of ingress messages to locally buffer per topic. Default is
+# unlimited. (integer value)
+#rpc_zmq_topic_backlog = <None>
+
+# Directory for holding IPC sockets. (string value)
+#rpc_zmq_ipc_dir = /var/run/openstack
+
+# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
+# "host" option, if running Nova. (string value)
+#rpc_zmq_host = localhost
+
+# Seconds to wait before a cast expires (TTL). The default value of -1
+# specifies an infinite linger period. The value of 0 specifies no linger
+# period. Pending messages shall be discarded immediately when the socket is
+# closed. Only supported by impl_zmq. (integer value)
+#rpc_cast_timeout = -1
+rpc_cast_timeout=30
+
+# The default number of seconds that poll should wait. Poll raises timeout
+# exception when timeout expired. (integer value)
+#rpc_poll_timeout = 1
+
+# Expiration timeout in seconds of a name service record about existing target
+# ( < 0 means no timeout). (integer value)
+#zmq_target_expire = 120
+
+# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
+# value)
+#use_pub_sub = true
+
+# Minimal port number for random ports range. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#rpc_zmq_min_port = 49152
+
+# Maximal port number for random ports range. (integer value)
+# Minimum value: 1
+# Maximum value: 65536
+#rpc_zmq_max_port = 65536
+
+# Number of retries to find free port number before fail with ZMQBindError.
+# (integer value)
+#rpc_zmq_bind_port_retries = 100
+
+# Size of executor thread pool. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
+#executor_thread_pool_size = 64
+executor_thread_pool_size = 70
+
+# Seconds to wait for a response from a call. (integer value)
+#rpc_response_timeout = 60
+rpc_response_timeout=60
+
+# A URL representing the messaging driver to use and its full configuration. If
+# not set, we fall back to the rpc_backend option and driver specific
+# configuration. (string value)
+#transport_url = <None>
+
+# The messaging driver to use, defaults to rabbit. Other drivers include amqp
+# and zmq. (string value)
+#rpc_backend = rabbit
+rpc_backend = rabbit
+
+{%- if server.message_queue.members is defined %}
+transport_url = rabbit://{% for member in server.message_queue.members -%}
+ {{ server.message_queue.user }}:{{ server.message_queue.password }}@{{ member.host }}:{{ member.get('port', 5672) }}
+ {%- if not loop.last -%},{%- endif -%}
+ {%- endfor -%}
+ /{{ server.message_queue.virtual_host }}
+{%- else %}
+transport_url = rabbit://{{ server.message_queue.user }}:{{ server.message_queue.password }}@{{ server.message_queue.host }}:{{ server.message_queue.port }}{{ server.message_queue.virtual_host }}
+{%- endif %}
+
+# The default exchange under which topics are scoped. May be overridden by an
+# exchange name specified in the transport_url option. (string value)
+#control_exchange = neutron
+
+#
+# From oslo.service.wsgi
+#
+
+# File name for the paste.deploy config for api service (string value)
+#api_paste_config = api-paste.ini
+
+# A python format string that is used as the template to generate log lines.
+# The following values can beformatted into it: client_ip, date_time,
+# request_line, status_code, body_length, wall_seconds. (string value)
+#wsgi_log_format = %(client_ip)s "%(request_line)s" status: %(status_code)s len: %(body_length)s time: %(wall_seconds).7f
+
+# Sets the value of TCP_KEEPIDLE in seconds for each server socket. Not
+# supported on OS X. (integer value)
+#tcp_keepidle = 600
+
+# Size of the pool of greenthreads used by wsgi (integer value)
+#wsgi_default_pool_size = 1000
+
+# Maximum line size of message headers to be accepted. max_header_line may need
+# to be increased when using large tokens (typically those generated by the
+# Keystone v3 API with big service catalogs). (integer value)
+#max_header_line = 16384
+
+# If False, closes the client socket connection explicitly. (boolean value)
+#wsgi_keep_alive = true
+
+# Timeout for client connections' socket operations. If an incoming connection
+# is idle for this number of seconds it will be closed. A value of '0' means
+# wait forever. (integer value)
+#client_socket_timeout = 900
+
+nova_url = http://{{ server.compute.host }}:8774/v2
+
+[agent]
+
+#
+# From neutron.agent
+#
+
+# Root helper application. Use 'sudo neutron-rootwrap
+# /etc/neutron/rootwrap.conf' to use the real root filter facility. Change to
+# 'sudo' to skip the filtering and just run the command directly. (string
+# value)
+root_helper = sudo /usr/bin/neutron-rootwrap /etc/neutron/rootwrap.conf
+
+# Use the root helper when listing the namespaces on a system. This may not be
+# required depending on the security configuration. If the root helper is not
+# required, set this to False for a performance improvement. (boolean value)
+#use_helper_for_ns_read = true
+
+# Root helper daemon application to use when possible. (string value)
+#root_helper_daemon = <None>
+
+# Seconds between nodes reporting state to server; should be less than
+# agent_down_time, best if it is half or less than agent_down_time. (floating
+# point value)
+#report_interval = 30
+report_interval = 10
+
+# Log agent heartbeats (boolean value)
+#log_agent_heartbeats = false
+
+# Add comments to iptables rules. Set to false to disallow the addition of
+# comments to generated iptables rules that describe each rule's purpose.
+# System must support the iptables comments module for addition of comments.
+# (boolean value)
+#comment_iptables_rules = true
+
+# Action to be executed when a child process dies (string value)
+# Allowed values: respawn, exit
+#check_child_processes_action = respawn
+
+# Interval between checks of child process liveness (seconds), use 0 to disable
+# (integer value)
+#check_child_processes_interval = 60
+
+# Availability zone of this node (string value)
+#availability_zone = nova
+
+
+[cors]
+
+#
+# From oslo.middleware.cors
+#
+
+# Indicate whether this resource may be shared with the domain received in the
+# requests "origin" header. (list value)
+#allowed_origin = <None>
+
+# Indicate that the actual request can include user credentials (boolean value)
+#allow_credentials = true
+
+# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
+# Headers. (list value)
+#expose_headers = X-Auth-Token,X-Subject-Token,X-Service-Token,X-OpenStack-Request-ID,OpenStack-Volume-microversion
+
+# Maximum cache age of CORS preflight requests. (integer value)
+#max_age = 3600
+
+# Indicate which methods can be used during the actual request. (list value)
+#allow_methods = GET,PUT,POST,DELETE,PATCH
+
+# Indicate which header field names may be used during the actual request.
+# (list value)
+#allow_headers = X-Auth-Token,X-Identity-Status,X-Roles,X-Service-Catalog,X-User-Id,X-Tenant-Id,X-OpenStack-Request-ID
+
+
+[cors.subdomain]
+
+#
+# From oslo.middleware.cors
+#
+
+# Indicate whether this resource may be shared with the domain received in the
+# requests "origin" header. (list value)
+#allowed_origin = <None>
+
+# Indicate that the actual request can include user credentials (boolean value)
+#allow_credentials = true
+
+# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
+# Headers. (list value)
+#expose_headers = X-Auth-Token,X-Subject-Token,X-Service-Token,X-OpenStack-Request-ID,OpenStack-Volume-microversion
+
+# Maximum cache age of CORS preflight requests. (integer value)
+#max_age = 3600
+
+# Indicate which methods can be used during the actual request. (list value)
+#allow_methods = GET,PUT,POST,DELETE,PATCH
+
+# Indicate which header field names may be used during the actual request.
+# (list value)
+#allow_headers = X-Auth-Token,X-Identity-Status,X-Roles,X-Service-Catalog,X-User-Id,X-Tenant-Id,X-OpenStack-Request-ID
+
+
+[database]
+
+#
+# From neutron.db
+#
+
+# Database engine for which script will be generated when using offline
+# migration. (string value)
+#engine =
+
+#
+# From oslo.db
+#
+
+# The file name to use with SQLite. (string value)
+# Deprecated group/name - [DEFAULT]/sqlite_db
+#sqlite_db = oslo.sqlite
+
+# If True, SQLite uses synchronous mode. (boolean value)
+# Deprecated group/name - [DEFAULT]/sqlite_synchronous
+#sqlite_synchronous = true
+
+# The back end to use for the database. (string value)
+# Deprecated group/name - [DEFAULT]/db_backend
+#backend = sqlalchemy
+
+# The SQLAlchemy connection string to use to connect to the database. (string
+# value)
+# Deprecated group/name - [DEFAULT]/sql_connection
+# Deprecated group/name - [DATABASE]/sql_connection
+# Deprecated group/name - [sql]/connection
+{% if server.backend.engine == "ml2" %}
+connection = {{ server.database.engine }}+pymysql://{{ server.database.user }}:{{ server.database.password }}@{{ server.database.host }}/{{ server.database.name }}?charset=utf8
+{% else %}
+connection = sqlite:////var/lib/neutron/neutron.sqlite
+{% endif %}
+# The SQLAlchemy connection string to use to connect to the slave database.
+# (string value)
+#slave_connection = <None>
+
+# The SQL mode to be used for MySQL sessions. This option, including the
+# default, overrides any server-set SQL mode. To use whatever SQL mode is set
+# by the server configuration, set this to no value. Example: mysql_sql_mode=
+# (string value)
+#mysql_sql_mode = TRADITIONAL
+
+# Timeout before idle SQL connections are reaped. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_idle_timeout
+# Deprecated group/name - [DATABASE]/sql_idle_timeout
+# Deprecated group/name - [sql]/idle_timeout
+#idle_timeout = 3600
+idle_timeout = 3600
+
+# Minimum number of SQL connections to keep open in a pool. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_min_pool_size
+# Deprecated group/name - [DATABASE]/sql_min_pool_size
+#min_pool_size = 1
+
+# Maximum number of SQL connections to keep open in a pool. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_max_pool_size
+# Deprecated group/name - [DATABASE]/sql_max_pool_size
+#max_pool_size = <None>
+max_pool_size = 20
+
+# Maximum number of database connection retries during startup. Set to -1 to
+# specify an infinite retry count. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_max_retries
+# Deprecated group/name - [DATABASE]/sql_max_retries
+#max_retries = 10
+max_retries = -1
+
+# Interval between retries of opening a SQL connection. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_retry_interval
+# Deprecated group/name - [DATABASE]/reconnect_interval
+#retry_interval = 10
+retry_interval = 2
+
+# If set, use this value for max_overflow with SQLAlchemy. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_max_overflow
+# Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
+#max_overflow = 50
+max_overflow = 20
+
+# Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
+# value)
+# Deprecated group/name - [DEFAULT]/sql_connection_debug
+#connection_debug = 0
+
+# Add Python stack traces to SQL as comment strings. (boolean value)
+# Deprecated group/name - [DEFAULT]/sql_connection_trace
+#connection_trace = false
+
+# If set, use this value for pool_timeout with SQLAlchemy. (integer value)
+# Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
+#pool_timeout = <None>
+
+# Enable the experimental use of database reconnect on connection lost.
+# (boolean value)
+#use_db_reconnect = false
+
+# Seconds between retries of a database transaction. (integer value)
+#db_retry_interval = 1
+
+# If True, increases the interval between retries of a database operation up to
+# db_max_retry_interval. (boolean value)
+#db_inc_retry_interval = true
+
+# If db_inc_retry_interval is set, the maximum seconds between retries of a
+# database operation. (integer value)
+#db_max_retry_interval = 10
+
+# Maximum retries in case of connection error or deadlock error before error is
+# raised. Set to -1 to specify an infinite retry count. (integer value)
+#db_max_retries = 20
+
+
+[keystone_authtoken]
+{% if server.backend.engine == "contrail" %}
+admin_token = {{ server.backend.token }}
+admin_user={{ server.backend.user }}
+admin_password={{ server.backend.password }}
+admin_tenant_name={{ server.backend.tenant }}
+{%- endif %}
+auth_region={{ server.identity.region }}
+auth_protocol=http
+revocation_cache_time = 10
+auth_type = password
+auth_host = {{ server.identity.host }}
+auth_port = 35357
+user_domain_id = {{ server.identity.get('domain', 'default') }}
+project_domain_id = {{ server.identity.get('domain', 'default') }}
+project_name = {{ server.identity.tenant }}
+username = {{ server.identity.user }}
+password = {{ server.identity.password }}
+auth_uri=http://{{ server.identity.host }}:5000
+auth_url=http://{{ server.identity.host }}:35357
+{%- if server.cache is defined %}
+memcached_servers={%- for member in server.cache.members %}{{ member.host }}:11211{% if not loop.last %},{% endif %}{%- endfor %}
+{%- endif %}
+#
+# From keystonemiddleware.auth_token
+#
+
+# Complete public Identity API endpoint. (string value)
+#auth_uri = <None>
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+# Do not handle authorization requests within the middleware, but delegate the
+# authorization decision to downstream WSGI components. (boolean value)
+#delay_auth_decision = false
+
+# Request timeout value for communicating with Identity API server. (integer
+# value)
+#http_connect_timeout = <None>
+
+# How many times are we trying to reconnect when communicating with Identity
+# API Server. (integer value)
+#http_request_max_retries = 3
+
+# Env key for the swift cache. (string value)
+#cache = <None>
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# The region in which the identity server can be found. (string value)
+#region_name = <None>
+
+# Directory used to cache files related to PKI tokens. (string value)
+#signing_dir = <None>
+
+# Optionally specify a list of memcached server(s) to use for caching. If left
+# undefined, tokens will instead be cached in-process. (list value)
+# Deprecated group/name - [DEFAULT]/memcache_servers
+#memcached_servers = <None>
+
+# In order to prevent excessive effort spent validating tokens, the middleware
+# caches previously-seen tokens for a configurable duration (in seconds). Set
+# to -1 to disable caching completely. (integer value)
+#token_cache_time = 300
+
+# Determines the frequency at which the list of revoked tokens is retrieved
+# from the Identity service (in seconds). A high number of revocation events
+# combined with a low cache duration may significantly reduce performance.
+# (integer value)
+#revocation_cache_time = 10
+
+# (Optional) If defined, indicate whether token data should be authenticated or
+# authenticated and encrypted. If MAC, token data is authenticated (with HMAC)
+# in the cache. If ENCRYPT, token data is encrypted and authenticated in the
+# cache. If the value is not one of these options or empty, auth_token will
+# raise an exception on initialization. (string value)
+# Allowed values: None, MAC, ENCRYPT
+#memcache_security_strategy = None
+
+# (Optional, mandatory if memcache_security_strategy is defined) This string is
+# used for key derivation. (string value)
+#memcache_secret_key = <None>
+
+# (Optional) Number of seconds memcached server is considered dead before it is
+# tried again. (integer value)
+#memcache_pool_dead_retry = 300
+
+# (Optional) Maximum total number of open connections to every memcached
+# server. (integer value)
+#memcache_pool_maxsize = 10
+
+# (Optional) Socket timeout in seconds for communicating with a memcached
+# server. (integer value)
+#memcache_pool_socket_timeout = 3
+
+# (Optional) Number of seconds a connection to memcached is held unused in the
+# pool before it is closed. (integer value)
+#memcache_pool_unused_timeout = 60
+
+# (Optional) Number of seconds that an operation will wait to get a memcached
+# client connection from the pool. (integer value)
+#memcache_pool_conn_get_timeout = 10
+
+# (Optional) Use the advanced (eventlet safe) memcached client pool. The
+# advanced pool will only work under python 2.x. (boolean value)
+#memcache_use_advanced_pool = false
+
+# (Optional) Indicate whether to set the X-Service-Catalog header. If False,
+# middleware will not ask for service catalog on token validation and will not
+# set the X-Service-Catalog header. (boolean value)
+#include_service_catalog = true
+
+# Used to control the use and type of token binding. Can be set to: "disabled"
+# to not check token binding. "permissive" (default) to validate binding
+# information if the bind type is of a form known to the server and ignore it
+# if not. "strict" like "permissive" but if the bind type is unknown the token
+# will be rejected. "required" any form of token binding is needed to be
+# allowed. Finally the name of a binding method that must be present in tokens.
+# (string value)
+#enforce_token_bind = permissive
+
+# If true, the revocation list will be checked for cached tokens. This requires
+# that PKI tokens are configured on the identity server. (boolean value)
+#check_revocations_for_cached = false
+
+# Hash algorithms to use for hashing PKI tokens. This may be a single algorithm
+# or multiple. The algorithms are those supported by Python standard
+# hashlib.new(). The hashes will be tried in the order given, so put the
+# preferred one first for performance. The result of the first hash will be
+# stored in the cache. This will typically be set to multiple values only while
+# migrating from a less secure algorithm to a more secure one. Once all the old
+# tokens are expired this option should be set to a single value for better
+# performance. (list value)
+#hash_algorithms = md5
+
+# Prefix to prepend at the beginning of the path. Deprecated, use identity_uri.
+# (string value)
+#auth_admin_prefix =
+
+# Host providing the admin Identity API endpoint. Deprecated, use identity_uri.
+# (string value)
+#auth_host = 127.0.0.1
+
+# Port of the admin Identity API endpoint. Deprecated, use identity_uri.
+# (integer value)
+#auth_port = 35357
+
+# Protocol of the admin Identity API endpoint. Deprecated, use identity_uri.
+# (string value)
+# Allowed values: http, https
+#auth_protocol = https
+
+# Complete admin Identity API endpoint. This should specify the unversioned
+# root endpoint e.g. https://localhost:35357/ (string value)
+#identity_uri = <None>
+
+# This option is deprecated and may be removed in a future release. Single
+# shared secret with the Keystone configuration used for bootstrapping a
+# Keystone installation, or otherwise bypassing the normal authentication
+# process. This option should not be used, use `admin_user` and
+# `admin_password` instead. (string value)
+#admin_token = <None>
+
+# Service username. (string value)
+#admin_user = <None>
+
+# Service user password. (string value)
+#admin_password = <None>
+
+# Service tenant name. (string value)
+#admin_tenant_name = admin
+
+# Authentication type to load (unknown value)
+# Deprecated group/name - [DEFAULT]/auth_plugin
+#auth_type = <None>
+
+# Config Section from which to load plugin specific options (unknown value)
+#auth_section = <None>
+
+
+[matchmaker_redis]
+
+#
+# From oslo.messaging
+#
+
+# Host to locate redis. (string value)
+#host = 127.0.0.1
+
+# Use this port to connect to redis host. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#port = 6379
+
+# Password for Redis server (optional). (string value)
+#password =
+
+# List of Redis Sentinel hosts (fault tolerance mode) e.g.
+# [host:port, host1:port ... ] (list value)
+#sentinel_hosts =
+
+# Redis replica set name. (string value)
+#sentinel_group_name = oslo-messaging-zeromq
+
+# Time in ms to wait between connection attempts. (integer value)
+#wait_timeout = 500
+
+# Time in ms to wait before the transaction is killed. (integer value)
+#check_timeout = 20000
+
+# Timeout in ms on blocking socket operations (integer value)
+#socket_timeout = 1000
+
+
+[nova]
+
+#
+# From neutron
+#
+
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = {{ server.compute.region }}
+
+# Type of the nova endpoint to use. This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Allowed values: public, admin, internal
+endpoint_type = {{ server.identity.get('endpoint_type', 'public') }}
+
+#
+# From nova.auth
+#
+
+# Authentication URL (unknown value)
+#auth_url = <None>
+user_domain_id = {{ server.identity.get('domain', 'default') }}
+project_domain_id = {{ server.identity.get('domain', 'default') }}
+project_name = {{ server.identity.tenant }}
+password = {{ server.compute.password }}
+username = {{ server.compute.user }}
+auth_type = password
+auth_url = http://{{ server.identity.host }}:35357
+
+# Authentication type to load (unknown value)
+# Deprecated group/name - [DEFAULT]/auth_plugin
+#auth_type = <None>
+
+# PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# (string value)
+#cafile = <None>
+
+# PEM encoded client certificate cert file (string value)
+#certfile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (unknown
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used
+# for both the user and project domain in v3 and ignored in v2 authentication.
+# (unknown value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (unknown value)
+#domain_id = <None>
+
+# Domain name to scope to (unknown value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# PEM encoded client certificate key file (string value)
+#keyfile = <None>
+
+# User's password (unknown value)
+#password = <None>
+
+# Domain ID containing project (unknown value)
+#project_domain_id = <None>
+
+# Domain name containing project (unknown value)
+#project_domain_name = <None>
+
+# Project ID to scope to (unknown value)
+# Deprecated group/name - [DEFAULT]/tenant-id
+#project_id = <None>
+
+# Project name to scope to (unknown value)
+# Deprecated group/name - [DEFAULT]/tenant-name
+#project_name = <None>
+
+# Tenant ID (unknown value)
+#tenant_id = <None>
+
+# Tenant Name (unknown value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (unknown value)
+#trust_id = <None>
+
+# User's domain id (unknown value)
+#user_domain_id = <None>
+
+# User's domain name (unknown value)
+#user_domain_name = <None>
+
+# User id (unknown value)
+#user_id = <None>
+
+# Username (unknown value)
+# Deprecated group/name - [DEFAULT]/username
+#username = <None>
+
+
+[oslo_concurrency]
+
+#
+# From oslo.concurrency
+#
+
+# Enables or disables inter-process locks. (boolean value)
+# Deprecated group/name - [DEFAULT]/disable_process_locking
+#disable_process_locking = false
+
+# Directory to use for lock files. For security, the specified directory
+# should only be writable by the user running the processes that need locking.
+# Defaults to environment variable OSLO_LOCK_PATH. If OSLO_LOCK_PATH is not set
+# in the environment, use the Python tempfile.gettempdir function to find a
+# suitable location. If external locks are used, a lock path must be set.
+# (string value)
+# Deprecated group/name - [DEFAULT]/lock_path
+#lock_path = /tmp
+lock_path = $state_path/lock
+
+[oslo_messaging_amqp]
+
+#
+# From oslo.messaging
+#
+
+# address prefix used when sending to a specific server (string value)
+# Deprecated group/name - [amqp1]/server_request_prefix
+#server_request_prefix = exclusive
+
+# address prefix used when broadcasting to all servers (string value)
+# Deprecated group/name - [amqp1]/broadcast_prefix
+#broadcast_prefix = broadcast
+
+# address prefix when sending to any server in group (string value)
+# Deprecated group/name - [amqp1]/group_request_prefix
+#group_request_prefix = unicast
+
+# Name for the AMQP container (string value)
+# Deprecated group/name - [amqp1]/container_name
+#container_name = <None>
+
+# Timeout for inactive connections (in seconds) (integer value)
+# Deprecated group/name - [amqp1]/idle_timeout
+#idle_timeout = 0
+
+# Debug: dump AMQP frames to stdout (boolean value)
+# Deprecated group/name - [amqp1]/trace
+#trace = false
+
+# CA certificate PEM file to verify server certificate (string value)
+# Deprecated group/name - [amqp1]/ssl_ca_file
+#ssl_ca_file =
+
+# Identifying certificate PEM file to present to clients (string value)
+# Deprecated group/name - [amqp1]/ssl_cert_file
+#ssl_cert_file =
+
+# Private key PEM file used to sign cert_file certificate (string value)
+# Deprecated group/name - [amqp1]/ssl_key_file
+#ssl_key_file =
+
+# Password for decrypting ssl_key_file (if encrypted) (string value)
+# Deprecated group/name - [amqp1]/ssl_key_password
+#ssl_key_password = <None>
+
+# Accept clients using either SSL or plain TCP (boolean value)
+# Deprecated group/name - [amqp1]/allow_insecure_clients
+#allow_insecure_clients = false
+
+# Space separated list of acceptable SASL mechanisms (string value)
+# Deprecated group/name - [amqp1]/sasl_mechanisms
+#sasl_mechanisms =
+
+# Path to directory that contains the SASL configuration (string value)
+# Deprecated group/name - [amqp1]/sasl_config_dir
+#sasl_config_dir =
+
+# Name of configuration file (without .conf suffix) (string value)
+# Deprecated group/name - [amqp1]/sasl_config_name
+#sasl_config_name =
+
+# User name for message broker authentication (string value)
+# Deprecated group/name - [amqp1]/username
+#username =
+
+# Password for message broker authentication (string value)
+# Deprecated group/name - [amqp1]/password
+#password =
+
+
+[oslo_messaging_notifications]
+
+#
+# From oslo.messaging
+#
+
+# The Drivers(s) to handle sending notifications. Possible values are
+# messaging, messagingv2, routing, log, test, noop (multi valued)
+# Deprecated group/name - [DEFAULT]/notification_driver
+#driver =
+{%- if server.notification is mapping %}
+driver = {{ server.notification.get('driver', 'messagingv2') }}
+{%- if server.notification.topics is defined %}
+topics = {{ server.notification.topics }}
+{%- endif %}
+{%- elif server.notification %}
+driver = messagingv2
+{%- endif %}
+# A URL representing the messaging driver to use for notifications. If not set,
+# we fall back to the same configuration used for RPC. (string value)
+# Deprecated group/name - [DEFAULT]/notification_transport_url
+#transport_url = <None>
+
+# AMQP topic used for OpenStack notifications. (list value)
+# Deprecated group/name - [rpc_notifier2]/topics
+# Deprecated group/name - [DEFAULT]/notification_topics
+#topics = notifications
+
+
+[oslo_messaging_rabbit]
+
+#
+# From oslo.messaging
+#
+
+# Use durable queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/amqp_durable_queues
+# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
+#amqp_durable_queues = false
+
+# Auto-delete queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/amqp_auto_delete
+#amqp_auto_delete = false
+
+# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
+# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
+# distributions. (string value)
+# Deprecated group/name - [DEFAULT]/kombu_ssl_version
+#kombu_ssl_version =
+
+# SSL key file (valid only if SSL enabled). (string value)
+# Deprecated group/name - [DEFAULT]/kombu_ssl_keyfile
+#kombu_ssl_keyfile =
+
+# SSL cert file (valid only if SSL enabled). (string value)
+# Deprecated group/name - [DEFAULT]/kombu_ssl_certfile
+#kombu_ssl_certfile =
+
+# SSL certification authority file (valid only if SSL enabled). (string value)
+# Deprecated group/name - [DEFAULT]/kombu_ssl_ca_certs
+#kombu_ssl_ca_certs =
+
+# How long to wait before reconnecting in response to an AMQP consumer cancel
+# notification. (floating point value)
+# Deprecated group/name - [DEFAULT]/kombu_reconnect_delay
+#kombu_reconnect_delay = 1.0
+
+# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not
+# be used. This option may notbe available in future versions. (string value)
+#kombu_compression = <None>
+
+# How long to wait a missing client beforce abandoning to send it its replies.
+# This value should not be longer than rpc_response_timeout. (integer value)
+# Deprecated group/name - [DEFAULT]/kombu_reconnect_timeout
+#kombu_missing_consumer_retry_timeout = 60
+
+# Determines how the next RabbitMQ node is chosen in case the one we are
+# currently connected to becomes unavailable. Takes effect only if more than
+# one RabbitMQ node is provided in config. (string value)
+# Allowed values: round-robin, shuffle
+#kombu_failover_strategy = round-robin
+
+# The RabbitMQ broker address where a single node is used. (string value)
+# Deprecated group/name - [DEFAULT]/rabbit_host
+#rabbit_host = localhost
+
+# The RabbitMQ broker port where a single node is used. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+# Deprecated group/name - [DEFAULT]/rabbit_port
+#rabbit_port = 5672
+
+# RabbitMQ HA cluster host:port pairs. (list value)
+# Deprecated group/name - [DEFAULT]/rabbit_hosts
+#rabbit_hosts = $rabbit_host:$rabbit_port
+#
+
+# Connect over SSL for RabbitMQ. (boolean value)
+# Deprecated group/name - [DEFAULT]/rabbit_use_ssl
+#rabbit_use_ssl = false
+
+# The RabbitMQ userid. (string value)
+# Deprecated group/name - [DEFAULT]/rabbit_userid
+#rabbit_userid = guest
+
+# The RabbitMQ password. (string value)
+# Deprecated group/name - [DEFAULT]/rabbit_password
+#rabbit_password = guest
+
+# The RabbitMQ login method. (string value)
+# Deprecated group/name - [DEFAULT]/rabbit_login_method
+#rabbit_login_method = AMQPLAIN
+
+# The RabbitMQ virtual host. (string value)
+# Deprecated group/name - [DEFAULT]/rabbit_virtual_host
+#rabbit_virtual_host = /
+
+# How frequently to retry connecting with RabbitMQ. (integer value)
+#rabbit_retry_interval = 1
+rabbit_retry_interval = 1
+
+# How long to backoff for between retries when connecting to RabbitMQ. (integer
+# value)
+# Deprecated group/name - [DEFAULT]/rabbit_retry_backoff
+#rabbit_retry_backoff = 2
+rabbit_retry_backoff = 2
+
+# Maximum interval of RabbitMQ connection retries. Default is 30 seconds.
+# (integer value)
+#rabbit_interval_max = 30
+
+# Maximum number of RabbitMQ connection retries. Default is 0 (infinite retry
+# count). (integer value)
+# Deprecated group/name - [DEFAULT]/rabbit_max_retries
+#rabbit_max_retries = 0
+rabbit_max_retries = 0
+
+# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this
+# option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring
+# is no longer controlled by the x-ha-policy argument when declaring a queue.
+# If you just want to make sure that all queues (except those with auto-
+# generated names) are mirrored across all nodes, run: "rabbitmqctl set_policy
+# HA '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value)
+# Deprecated group/name - [DEFAULT]/rabbit_ha_queues
+#rabbit_ha_queues = false
+
+# Positive integer representing duration in seconds for queue TTL (x-expires).
+# Queues which are unused for the duration of the TTL are automatically
+# deleted. The parameter affects only reply and fanout queues. (integer value)
+# Minimum value: 1
+#rabbit_transient_queues_ttl = 1800
+
+# Specifies the number of messages to prefetch. Setting to zero allows
+# unlimited messages. (integer value)
+#rabbit_qos_prefetch_count = 0
+
+# Number of seconds after which the Rabbit broker is considered down if
+# heartbeat's keep-alive fails (0 disable the heartbeat). EXPERIMENTAL (integer
+# value)
+#heartbeat_timeout_threshold = 60
+heartbeat_timeout_threshold = 0
+
+# How often times during the heartbeat_timeout_threshold we check the
+# heartbeat. (integer value)
+#heartbeat_rate = 2
+heartbeat_rate = 2
+
+# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake (boolean value)
+# Deprecated group/name - [DEFAULT]/fake_rabbit
+#fake_rabbit = false
+
+# Maximum number of channels to allow (integer value)
+#channel_max = <None>
+
+# The maximum byte size for an AMQP frame (integer value)
+#frame_max = <None>
+
+# How often to send heartbeats for consumer's connections (integer value)
+#heartbeat_interval = 1
+
+# Enable SSL (boolean value)
+#ssl = <None>
+
+# Arguments passed to ssl.wrap_socket (dict value)
+#ssl_options = <None>
+
+# Set socket timeout in seconds for connection's socket (floating point value)
+#socket_timeout = 0.25
+
+# Set TCP_USER_TIMEOUT in seconds for connection's socket (floating point
+# value)
+#tcp_user_timeout = 0.25
+
+# Set delay for reconnection to some host which has connection error (floating
+# point value)
+#host_connection_reconnect_delay = 0.25
+
+# Maximum number of connections to keep queued. (integer value)
+#pool_max_size = 10
+
+# Maximum number of connections to create above `pool_max_size`. (integer
+# value)
+#pool_max_overflow = 0
+
+# Default number of seconds to wait for a connections to available (integer
+# value)
+#pool_timeout = 30
+
+# Lifetime of a connection (since creation) in seconds or None for no
+# recycling. Expired connections are closed on acquire. (integer value)
+#pool_recycle = 600
+
+# Threshold at which inactive (since release) connections are considered stale
+# in seconds or None for no staleness. Stale connections are closed on acquire.
+# (integer value)
+#pool_stale = 60
+
+# Persist notification messages. (boolean value)
+#notification_persistence = false
+
+# Exchange name for for sending notifications (string value)
+#default_notification_exchange = ${control_exchange}_notification
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# notification listener. (integer value)
+#notification_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during sending
+# notification, -1 means infinite retry. (integer value)
+#default_notification_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during sending
+# notification message (floating point value)
+#notification_retry_delay = 0.25
+
+# Time to live for rpc queues without consumers in seconds. (integer value)
+#rpc_queue_expiration = 60
+
+# Exchange name for sending RPC messages (string value)
+#default_rpc_exchange = ${control_exchange}_rpc
+
+# Exchange name for receiving RPC replies (string value)
+#rpc_reply_exchange = ${control_exchange}_rpc_reply
+
+# Max number of not acknowledged message which RabbitMQ can send to rpc
+# listener. (integer value)
+#rpc_listener_prefetch_count = 100
+
+# Max number of not acknowledged message which RabbitMQ can send to rpc reply
+# listener. (integer value)
+#rpc_reply_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during sending
+# reply. -1 means infinite retry during rpc_timeout (integer value)
+#rpc_reply_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during sending
+# reply. (floating point value)
+#rpc_reply_retry_delay = 0.25
+
+# Reconnecting retry count in case of connectivity problem during sending RPC
+# message, -1 means infinite retry. If actual retry attempts in not 0 the rpc
+# request could be processed more then one time (integer value)
+#default_rpc_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during sending RPC
+# message (floating point value)
+#rpc_retry_delay = 0.25
+
+
+[oslo_policy]
+
+#
+# From oslo.policy
+#
+
+# The JSON file that defines policies. (string value)
+# Deprecated group/name - [DEFAULT]/policy_file
+#policy_file = policy.json
+
+# Default rule. Enforced when a requested rule is not found. (string value)
+# Deprecated group/name - [DEFAULT]/policy_default_rule
+#policy_default_rule = default
+
+# Directories where policy configuration files are stored. They can be relative
+# to any directory in the search path defined by the config_dir option, or
+# absolute paths. The file defined by policy_file must exist for these
+# directories to be searched. Missing or empty directories are ignored. (multi
+# valued)
+# Deprecated group/name - [DEFAULT]/policy_dirs
+#policy_dirs = policy.d
+
+
+[quotas]
+
+#
+# From neutron
+#
+
+# Resource name(s) that are supported in quota features. This option is now
+# deprecated for removal. (list value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#quota_items = network,subnet,port
+
+# Default number of resource allowed per tenant. A negative value means
+# unlimited. (integer value)
+#default_quota = -1
+
+# Number of networks allowed per tenant. A negative value means unlimited.
+# (integer value)
+#quota_network = 10
+
+# Number of subnets allowed per tenant, A negative value means unlimited.
+# (integer value)
+#quota_subnet = 10
+
+# Number of ports allowed per tenant. A negative value means unlimited.
+# (integer value)
+#quota_port = 50
+
+# Default driver to use for quota checks (string value)
+#quota_driver = neutron.db.quota.driver.DbQuotaDriver
+{% if server.backend.engine == "contrail" %}
+quota_driver = neutron_plugin_contrail.plugins.opencontrail.quota.driver.QuotaDriver
+{% endif %}
+
+# Keep in track in the database of current resourcequota usage. Plugins which
+# do not leverage the neutron database should set this flag to False (boolean
+# value)
+#track_quota_usage = true
+
+#
+# From neutron.extensions
+#
+
+# Number of routers allowed per tenant. A negative value means unlimited.
+# (integer value)
+#quota_router = 10
+
+# Number of floating IPs allowed per tenant. A negative value means unlimited.
+# (integer value)
+#quota_floatingip = 50
+
+# Number of security groups allowed per tenant. A negative value means
+# unlimited. (integer value)
+#quota_security_group = 10
+
+# Number of security rules allowed per tenant. A negative value means
+# unlimited. (integer value)
+#quota_security_group_rule = 100
+
+
+[ssl]
+
+#
+# From oslo.service.sslutils
+#
+
+# CA certificate file to use to verify connecting clients. (string value)
+# Deprecated group/name - [DEFAULT]/ssl_ca_file
+#ca_file = <None>
+
+# Certificate file to use when starting the server securely. (string value)
+# Deprecated group/name - [DEFAULT]/ssl_cert_file
+#cert_file = <None>
+
+# Private key file to use when starting the server securely. (string value)
+# Deprecated group/name - [DEFAULT]/ssl_key_file
+#key_file = <None>
+
+# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
+# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
+# distributions. (string value)
+#version = <None>
+
+# Sets the list of available ciphers. value should be a string in the OpenSSL
+# cipher list format. (string value)
+#ciphers = <None>
+[service_providers]
+
+{% if server.lbaas is defined -%}
+
+{%- if server.lbaas.enabled -%}
+
+{%- for lbaas_name, lbaas in server.lbaas.providers.iteritems() %}
+
+{%- if lbaas.engine == "avinetworks" -%}
+service_provider=LOADBALANCERV2:{{ lbaas_name }}:neutron_lbaas.drivers.avi.avi_driver.AviDriver
+
+[{{ lbaas_name }}]
+address={{ lbaas.controller_address }}
+user={{ lbaas.controller_user }}
+password={{ lbaas.controller_password }}
+cloud={{ lbaas.controller_cloud_name }}
+{%- endif -%}
+
+{%- endfor -%}
+
+{% endif %}
+
+{% elif server.backend.engine == "contrail" %}
+
+service_provider = LOADBALANCER:Opencontrail:neutron_plugin_contrail.plugins.opencontrail.loadbalancer.driver.OpencontrailLoadbalancerDriver:default
+
+{% include "neutron/files/"+server.version+"/ContrailPlugin.ini" %}
+
+{% endif %}
diff --git a/neutron/files/newton/openvswitch_agent.ini b/neutron/files/newton/openvswitch_agent.ini
new file mode 100644
index 0000000..b93aaeb
--- /dev/null
+++ b/neutron/files/newton/openvswitch_agent.ini
@@ -0,0 +1,259 @@
+{%- if pillar.neutron.gateway is defined %}
+{%- from "neutron/map.jinja" import gateway as neutron with context %}
+{%- else %}
+{%- from "neutron/map.jinja" import compute as neutron with context %}
+{%- endif %}
+
+[DEFAULT]
+
+#
+# From oslo.log
+#
+
+# If set to true, the logging level will be set to DEBUG instead of the default INFO level. (boolean value)
+#debug = false
+
+# If set to false, the logging level will be set to WARNING instead of the default INFO level. (boolean value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#verbose = true
+
+# The name of a logging configuration file. This file is appended to any existing logging configuration files. For details about logging
+# configuration files, see the Python logging module documentation. Note that when logging configuration files are used then all logging
+# configuration is set in the configuration file and other logging configuration options are ignored (for example,
+# logging_context_format_string). (string value)
+# Deprecated group/name - [DEFAULT]/log_config
+#log_config_append = <None>
+
+# Defines the format string for %%(asctime)s in log records. Default: %(default)s . This option is ignored if log_config_append is set.
+# (string value)
+#log_date_format = %Y-%m-%d %H:%M:%S
+
+# (Optional) Name of log file to send logging output to. If no default is set, logging will go to stderr as defined by use_stderr. This
+# option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logfile
+#log_file = <None>
+
+# (Optional) The base directory used for relative log_file paths. This option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logdir
+#log_dir = <None>
+
+# Uses logging handler designed to watch file system. When log file is moved or removed this handler will open a new log file with specified
+# path instantaneously. It makes sense only if log_file option is specified and Linux platform is used. This option is ignored if
+# log_config_append is set. (boolean value)
+#watch_log_file = false
+
+# Use syslog for logging. Existing syslog format is DEPRECATED and will be changed later to honor RFC5424. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_syslog = false
+
+# Syslog facility to receive log lines. This option is ignored if log_config_append is set. (string value)
+#syslog_log_facility = LOG_USER
+
+# Log output to standard error. This option is ignored if log_config_append is set. (boolean value)
+#use_stderr = true
+
+# Format string to use for log messages with context. (string value)
+#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
+
+# Format string to use for log messages when context is undefined. (string value)
+#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
+
+# Additional data to append to log message when logging level for the message is DEBUG. (string value)
+#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
+
+# Prefix each line of exception output with this format. (string value)
+#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
+
+# Defines the format string for %(user_identity)s that is used in logging_context_format_string. (string value)
+#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
+
+# List of package logging levels in logger=LEVEL pairs. This option is ignored if log_config_append is set. (list value)
+#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
+
+# Enables or disables publication of error events. (boolean value)
+#publish_errors = false
+
+# The format for an instance that is passed with the log message. (string value)
+#instance_format = "[instance: %(uuid)s] "
+
+# The format for an instance UUID that is passed with the log message. (string value)
+#instance_uuid_format = "[instance: %(uuid)s] "
+
+# Enables or disables fatal status of deprecations. (boolean value)
+#fatal_deprecations = false
+
+
+[agent]
+
+#
+# From neutron.ml2.ovs.agent
+#
+
+# The number of seconds the agent will wait between polling for local device changes. (integer value)
+#polling_interval = 2
+
+# Minimize polling by monitoring ovsdb for interface changes. (boolean value)
+#minimize_polling = true
+
+# The number of seconds to wait before respawning the ovsdb monitor after losing communication with it. (integer value)
+#ovsdb_monitor_respawn_interval = 30
+
+# Network types supported by the agent (gre and/or vxlan). (list value)
+#tunnel_types =
+{%- if "vxlan" in neutron.backend.tenant_network_types %}
+tunnel_types =vxlan
+
+# The UDP port to use for VXLAN tunnels. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#vxlan_udp_port = 4789
+vxlan_udp_port = 4789
+
+# MTU size of veth interfaces (integer value)
+#veth_mtu = 9000
+
+# Use ML2 l2population mechanism driver to learn remote MAC and IPs and improve tunnel scalability. (boolean value)
+#l2_population = false
+l2_population = True
+
+# Enable local ARP responder if it is supported. Requires OVS 2.1 and ML2 l2population driver. Allows the switch (when supporting an
+# overlay) to respond to an ARP request locally without performing a costly ARP broadcast into the overlay. (boolean value)
+#arp_responder = false
+arp_responder = True
+{%- endif %}
+
+# Enable suppression of ARP responses that don't match an IP address that belongs to the port from which they originate. Note: This prevents
+# the VMs attached to this agent from spoofing, it doesn't protect them from other devices which have the capability to spoof (e.g. bare
+# metal or VMs attached to agents without this flag set to True). Spoofing rules will not be added to any ports that have port security
+# disabled. For LinuxBridge, this requires ebtables. For OVS, it requires a version that supports matching ARP headers. This option will be
+# removed in Newton so the only way to disable protection will be via the port security extension. (boolean value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#prevent_arp_spoofing = true
+
+# Set or un-set the don't fragment (DF) bit on outgoing IP packet carrying GRE/VXLAN tunnel. (boolean value)
+#dont_fragment = true
+
+# Make the l2 agent run in DVR mode. (boolean value)
+#enable_distributed_routing = false
+enable_distributed_routing = {{ neutron.get('dvr', 'False') }}
+
+# Set new timeout in seconds for new rpc calls after agent receives SIGTERM. If value is set to 0, rpc timeout won't be changed (integer
+# value)
+#quitting_rpc_timeout = 10
+
+# Reset flow table on start. Setting this to True will cause brief traffic interruption. (boolean value)
+#drop_flows_on_start = false
+drop_flows_on_start = False
+
+# Set or un-set the tunnel header checksum on outgoing IP packet carrying GRE/VXLAN tunnel. (boolean value)
+#tunnel_csum = false
+
+# Selects the Agent Type reported (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#agent_type = Open vSwitch agent
+
+
+[ovs]
+
+#
+# From neutron.ml2.ovs.agent
+#
+
+# Integration bridge to use. Do not change this parameter unless you have a good reason to. This is the name of the OVS integration bridge.
+# There is one per hypervisor. The integration bridge acts as a virtual 'patch bay'. All VM VIFs are attached to this bridge and then
+# 'patched' according to their network connectivity. (string value)
+#integration_bridge = br-int
+integration_bridge = br-int
+
+# Tunnel bridge to use. (string value)
+#tunnel_bridge = br-tun
+tunnel_bridge = br-tun
+
+# Peer patch port in integration bridge for tunnel bridge. (string value)
+#int_peer_patch_port = patch-tun
+
+# Peer patch port in tunnel bridge for integration bridge. (string value)
+#tun_peer_patch_port = patch-int
+
+# Local IP address of tunnel endpoint. Can be either an IPv4 or IPv6 address. (IP address value)
+#local_ip = <None>
+{%- if "vxlan" in neutron.backend.tenant_network_types %}
+local_ip = {{ neutron.local_ip }}
+{%- endif %}
+
+# Comma-separated list of <physical_network>:<bridge> tuples mapping physical network names to the agent's node-specific Open vSwitch bridge
+# names to be used for flat and VLAN networks. The length of bridge names should be no more than 11. Each bridge must exist, and should have
+# a physical network interface configured as a port. All physical networks configured on the server should have mappings to appropriate
+# bridges on each agent. Note: If you remove a bridge from this mapping, make sure to disconnect it from the integration bridge as it won't
+# be managed by the agent anymore. Deprecated for ofagent. (list value)
+#bridge_mappings =
+{%- if "vlan" in neutron.backend.tenant_network_types %}
+bridge_mappings ={%- if neutron.get('external_access', True) %}physnet1:br-floating,{%- endif %}physnet2:br-prv
+{%- elif neutron.get('external_access', True) %}
+bridge_mappings =physnet1:br-floating
+{%- endif %}
+# Use veths instead of patch ports to interconnect the integration bridge to physical networks. Support kernel without Open vSwitch patch
+# port support so long as it is set to True. (boolean value)
+#use_veth_interconnection = false
+
+# OpenFlow interface to use. (string value)
+# Allowed values: ovs-ofctl, native
+#of_interface = ovs-ofctl
+
+# OVS datapath to use. 'system' is the default value and corresponds to the kernel datapath. To enable the userspace datapath set this value
+# to 'netdev'. (string value)
+# Allowed values: system, netdev
+#datapath_type = system
+{%- if neutron.dpdk %}
+datapath_type = netdev
+{%- endif %}
+
+# OVS vhost-user socket directory. (string value)
+#vhostuser_socket_dir = /var/run/openvswitch
+
+# Address to listen on for OpenFlow connections. Used only for 'native' driver. (IP address value)
+#of_listen_address = 127.0.0.1
+
+# Port to listen on for OpenFlow connections. Used only for 'native' driver. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#of_listen_port = 6633
+
+# Timeout in seconds to wait for the local switch connecting the controller. Used only for 'native' driver. (integer value)
+#of_connect_timeout = 30
+
+# Timeout in seconds to wait for a single OpenFlow request. Used only for 'native' driver. (integer value)
+#of_request_timeout = 10
+
+# The interface for interacting with the OVSDB (string value)
+# Allowed values: vsctl, native
+#ovsdb_interface = vsctl
+
+# The connection string for the native OVSDB backend. Requires the native ovsdb_interface to be enabled. (string value)
+#ovsdb_connection = tcp:127.0.0.1:6640
+
+[securitygroup]
+
+#
+# From neutron.ml2.ovs.agent
+#
+
+# Driver for security groups firewall in the L2 agent (string value)
+#firewall_driver = <None>
+{%- if neutron.dpdk %}
+firewall_driver = openvswitch
+{%- else %}
+firewall_driver = neutron.agent.linux.iptables_firewall.OVSHybridIptablesFirewallDriver
+{%- endif %}
+
+# Controls whether the neutron security group API is enabled in the server. It should be false when using no security groups or using the
+# nova security group API. (boolean value)
+#enable_security_group = true
+enable_security_group = True
+
+# Use ipset to speed-up the iptables based security groups. Enabling ipset support requires that ipset is installed on L2 agent node.
+# (boolean value)
+#enable_ipset = true
diff --git a/neutron/files/newton/sriov_agent.ini b/neutron/files/newton/sriov_agent.ini
new file mode 100644
index 0000000..d4ac823
--- /dev/null
+++ b/neutron/files/newton/sriov_agent.ini
@@ -0,0 +1,45 @@
+{%- if pillar.neutron.gateway is defined %}
+{%- from "neutron/map.jinja" import gateway as neutron with context %}
+{%- else %}
+{%- from "neutron/map.jinja" import compute as neutron with context %}
+{%- endif %}
+[DEFAULT]
+
+#
+# From oslo.log
+#
+
+# If set to true, the logging level will be set to DEBUG instead of the default INFO level. (boolean value)
+#debug = false
+
+# If set to false, the logging level will be set to WARNING instead of the default INFO level. (boolean value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#verbose = true
+
+[agent]
+
+#
+# From neutron.ml2.sriov.agent
+#
+
+# Extensions list to use (list value)
+#extensions =
+
+
+[ml2_sriov]
+
+#
+# From neutron.ml2.sriov.agent
+#
+
+# Comma-separated list of <physical_network>:<network_device> tuples mapping physical network names to the agent's node-specific physical
+# network device interfaces of SR-IOV physical function to be used for VLAN networks. All physical networks listed in network_vlan_ranges on
+# the server should have mappings to appropriate interfaces on each agent. (list value)
+#physical_device_mappings =
+physical_device_mappings = {%- for nic_name, sriov in neutron.backend.sriov.iteritems() %}{{ sriov.physical_network }}:{{ sriov.devname }}{% if not loop.last %},{% endif %}{%- endfor %}
+
+# Comma-separated list of <network_device>:<vfs_to_exclude> tuples, mapping network_device to the agent's node-specific list of virtual
+# functions that should not be used for virtual networking. vfs_to_exclude is a semicolon-separated list of virtual functions to exclude
+# from network_device. The network_device in the mapping should appear in the physical_device_mappings list. (list value)
+#exclude_devices =
diff --git a/neutron/files/ocata/ContrailPlugin.ini b/neutron/files/ocata/ContrailPlugin.ini
new file mode 100644
index 0000000..2817f52
--- /dev/null
+++ b/neutron/files/ocata/ContrailPlugin.ini
@@ -0,0 +1,13 @@
+{% from "neutron/map.jinja" import server with context %}
+[APISERVER]
+api_server_ip = {{ server.backend.host }}
+api_server_port = 8082
+multi_tenancy = True
+contrail_extensions = ipam:neutron_plugin_contrail.plugins.opencontrail.contrail_plugin_ipam.NeutronPluginContrailIpam,policy:neutron_plugin_contrail.plugins.opencontrail.contrail_plugin_policy.NeutronPluginContrailPolicy,route-table:neutron_plugin_contrail.plugins.opencontrail.contrail_plugin_vpc.NeutronPluginContrailVpc,contrail:None
+
+[KEYSTONE]
+auth_url = http://{{ server.identity.host }}:35357/v2.0
+admin_token = {{ server.backend.token }}
+admin_user={{ server.backend.user }}
+admin_password={{ server.backend.password }}
+admin_tenant_name={{ server.backend.tenant }}
\ No newline at end of file
diff --git a/neutron/files/ocata/api-paste.ini.Debian b/neutron/files/ocata/api-paste.ini.Debian
new file mode 100644
index 0000000..580ee6f
--- /dev/null
+++ b/neutron/files/ocata/api-paste.ini.Debian
@@ -0,0 +1,52 @@
+{%- from "neutron/map.jinja" import server with context %}
+[composite:neutron]
+use = egg:Paste#urlmap
+/: neutronversions_composite
+/v2.0: neutronapi_v2_0
+
+[composite:neutronapi_v2_0]
+use = call:neutron.auth:pipeline_factory
+noauth = cors http_proxy_to_wsgi request_id catch_errors extensions neutronapiapp_v2_0
+keystone = cors http_proxy_to_wsgi request_id catch_errors authtoken keystonecontext extensions {% if server.audit.enabled %}audit {% endif %}neutronapiapp_v2_0
+
+[composite:neutronversions_composite]
+use = call:neutron.auth:pipeline_factory
+noauth = cors http_proxy_to_wsgi neutronversions
+keystone = cors http_proxy_to_wsgi {% if server.audit.enabled %}audit {% endif %}neutronversions
+
+[filter:request_id]
+paste.filter_factory = oslo_middleware:RequestId.factory
+
+[filter:catch_errors]
+paste.filter_factory = oslo_middleware:CatchErrors.factory
+
+[filter:cors]
+paste.filter_factory = oslo_middleware.cors:filter_factory
+oslo_config_project = neutron
+
+[filter:http_proxy_to_wsgi]
+paste.filter_factory = oslo_middleware.http_proxy_to_wsgi:HTTPProxyToWSGI.factory
+
+[filter:keystonecontext]
+paste.filter_factory = neutron.auth:NeutronKeystoneContext.factory
+
+[filter:authtoken]
+paste.filter_factory = keystonemiddleware.auth_token:filter_factory
+
+[filter:extensions]
+paste.filter_factory = neutron.api.extensions:plugin_aware_extension_middleware_factory
+
+[app:neutronversions]
+paste.app_factory = neutron.api.versions:Versions.factory
+
+[app:neutronapiapp_v2_0]
+paste.app_factory = neutron.api.v2.router:APIRouter.factory
+
+{%- if server.audit.enabled %}
+[filter:audit]
+paste.filter_factory = {{ server.get("audit", {}).get("filter_factory", "keystonemiddleware.audit:filter_factory") }}
+audit_map_file = {{ server.get("audit", {}).get("map_file", "/etc/pycadf/neutron_api_audit_map.conf") }}
+{%- endif %}
+
+[filter:osprofiler]
+paste.filter_factory = osprofiler.web:WsgiMiddleware.factory
diff --git a/neutron/files/ocata/api-paste.ini.RedHat b/neutron/files/ocata/api-paste.ini.RedHat
new file mode 120000
index 0000000..08fd76a
--- /dev/null
+++ b/neutron/files/ocata/api-paste.ini.RedHat
@@ -0,0 +1 @@
+api-paste.ini.Debian
\ No newline at end of file
diff --git a/neutron/files/ocata/dhcp_agent.ini b/neutron/files/ocata/dhcp_agent.ini
new file mode 100644
index 0000000..293b968
--- /dev/null
+++ b/neutron/files/ocata/dhcp_agent.ini
@@ -0,0 +1,200 @@
+[DEFAULT]
+
+#
+# From neutron.base.agent
+#
+
+# Name of Open vSwitch bridge to use (string value)
+#ovs_integration_bridge = br-int
+
+# Uses veth for an OVS interface or not. Support kernels with limited namespace support (e.g. RHEL 6.5) so long as ovs_use_veth is set to
+# True. (boolean value)
+#ovs_use_veth = false
+
+# MTU setting for device. This option will be removed in Newton. Please use the system-wide global_physnet_mtu setting which the agents will
+# take into account when wiring VIFs. (integer value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#network_device_mtu = <None>
+
+# The driver used to manage the virtual interface. (string value)
+#interface_driver = <None>
+interface_driver = neutron.agent.linux.interface.OVSInterfaceDriver
+
+# Timeout in seconds for ovs-vsctl commands. If the timeout expires, ovs commands will fail with ALARMCLOCK error. (integer value)
+#ovs_vsctl_timeout = 10
+
+#
+# From neutron.dhcp.agent
+#
+
+# The DHCP agent will resync its state with Neutron to recover from any transient notification or RPC errors. The interval is number of
+# seconds between attempts. (integer value)
+#resync_interval = 5
+resync_interval = 30
+
+# The driver used to manage the DHCP server. (string value)
+#dhcp_driver = neutron.agent.linux.dhcp.Dnsmasq
+dhcp_driver = neutron.agent.linux.dhcp.Dnsmasq
+
+# The DHCP server can assist with providing metadata support on isolated networks. Setting this value to True will cause the DHCP server to
+# append specific host routes to the DHCP request. The metadata service will only be activated when the subnet does not contain any router
+# port. The guest instance must be configured to request host routes via DHCP (Option 121). This option doesn't have any effect when
+# force_metadata is set to True. (boolean value)
+#enable_isolated_metadata = false
+enable_isolated_metadata = True
+
+# In some cases the Neutron router is not present to provide the metadata IP but the DHCP server can be used to provide this info. Setting
+# this value will force the DHCP server to append specific host routes to the DHCP request. If this option is set, then the metadata service
+# will be activated for all the networks. (boolean value)
+#force_metadata = false
+
+# Allows for serving metadata requests coming from a dedicated metadata access network whose CIDR is 169.254.169.254/16 (or larger prefix),
+# and is connected to a Neutron router from which the VMs send metadata:1 request. In this case DHCP Option 121 will not be injected in VMs,
+# as they will be able to reach 169.254.169.254 through a router. This option requires enable_isolated_metadata = True. (boolean value)
+#enable_metadata_network = false
+enable_metadata_network = False
+
+# Number of threads to use during sync process. Should not exceed connection pool size configured on server. (integer value)
+#num_sync_threads = 4
+
+# Location to store DHCP server config files. (string value)
+#dhcp_confs = $state_path/dhcp
+
+# Domain to use for building the hostnames. This option is deprecated. It has been moved to neutron.conf as dns_domain. It will be removed
+# in a future release. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#dhcp_domain = openstacklocal
+
+# Override the default dnsmasq settings with this file. (string value)
+#dnsmasq_config_file =
+
+# Comma-separated list of the DNS servers which will be used as forwarders. (list value)
+# Deprecated group/name - [DEFAULT]/dnsmasq_dns_server
+#dnsmasq_dns_servers = <None>
+
+# Base log dir for dnsmasq logging. The log contains DHCP and DNS log information and is useful for debugging issues with either DHCP or
+# DNS. If this section is null, disable dnsmasq log. (string value)
+#dnsmasq_base_log_dir = <None>
+
+# Enables the dnsmasq service to provide name resolution for instances via DNS resolvers on the host running the DHCP agent. Effectively
+# removes the '--no-resolv' option from the dnsmasq process arguments. Adding custom DNS resolvers to the 'dnsmasq_dns_servers' option
+# disables this feature. (boolean value)
+#dnsmasq_local_resolv = false
+
+# Limit number of leases to prevent a denial-of-service. (integer value)
+#dnsmasq_lease_max = 16777216
+
+# Use broadcast in DHCP replies. (boolean value)
+#dhcp_broadcast_reply = false
+
+#
+# From oslo.log
+#
+
+# If set to true, the logging level will be set to DEBUG instead of the default INFO level. (boolean value)
+#debug = false
+debug = False
+
+# If set to false, the logging level will be set to WARNING instead of the default INFO level. (boolean value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#verbose = true
+
+# The name of a logging configuration file. This file is appended to any existing logging configuration files. For details about logging
+# configuration files, see the Python logging module documentation. Note that when logging configuration files are used then all logging
+# configuration is set in the configuration file and other logging configuration options are ignored (for example,
+# logging_context_format_string). (string value)
+# Deprecated group/name - [DEFAULT]/log_config
+#log_config_append = <None>
+
+# Defines the format string for %%(asctime)s in log records. Default: %(default)s . This option is ignored if log_config_append is set.
+# (string value)
+#log_date_format = %Y-%m-%d %H:%M:%S
+
+# (Optional) Name of log file to send logging output to. If no default is set, logging will go to stderr as defined by use_stderr. This
+# option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logfile
+#log_file = <None>
+
+# (Optional) The base directory used for relative log_file paths. This option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logdir
+#log_dir = <None>
+
+# Uses logging handler designed to watch file system. When log file is moved or removed this handler will open a new log file with specified
+# path instantaneously. It makes sense only if log_file option is specified and Linux platform is used. This option is ignored if
+# log_config_append is set. (boolean value)
+#watch_log_file = false
+
+# Use syslog for logging. Existing syslog format is DEPRECATED and will be changed later to honor RFC5424. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_syslog = false
+
+# Syslog facility to receive log lines. This option is ignored if log_config_append is set. (string value)
+#syslog_log_facility = LOG_USER
+
+# Log output to standard error. This option is ignored if log_config_append is set. (boolean value)
+#use_stderr = true
+
+# Format string to use for log messages with context. (string value)
+#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
+
+# Format string to use for log messages when context is undefined. (string value)
+#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
+
+# Additional data to append to log message when logging level for the message is DEBUG. (string value)
+#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
+
+# Prefix each line of exception output with this format. (string value)
+#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
+
+# Defines the format string for %(user_identity)s that is used in logging_context_format_string. (string value)
+#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
+
+# List of package logging levels in logger=LEVEL pairs. This option is ignored if log_config_append is set. (list value)
+#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
+
+# Enables or disables publication of error events. (boolean value)
+#publish_errors = false
+
+# The format for an instance that is passed with the log message. (string value)
+#instance_format = "[instance: %(uuid)s] "
+
+# The format for an instance UUID that is passed with the log message. (string value)
+#instance_uuid_format = "[instance: %(uuid)s] "
+
+# Enables or disables fatal status of deprecations. (boolean value)
+#fatal_deprecations = false
+root_helper=sudo neutron-rootwrap /etc/neutron/rootwrap.conf
+state_path=/var/lib/neutron
+
+
+[AGENT]
+
+#
+# From neutron.base.agent
+#
+
+# Seconds between nodes reporting state to server; should be less than agent_down_time, best if it is half or less than agent_down_time.
+# (floating point value)
+#report_interval = 30
+
+# Log agent heartbeats (boolean value)
+#log_agent_heartbeats = false
+
+[ovs]
+
+#
+# From neutron.base.agent
+#
+
+# The interface for interacting with the OVSDB (string value)
+# Allowed values: vsctl, native
+#ovsdb_interface = native
+
+# The connection string for the OVSDB backend. Will be used by ovsdb-client
+# when monitoring and used for the all ovsdb commands when native
+# ovsdb_interface is enabled (string value)
+#ovsdb_connection = tcp:127.0.0.1:6640
+
diff --git a/neutron/files/ocata/l3_agent.ini b/neutron/files/ocata/l3_agent.ini
new file mode 100644
index 0000000..44b27ff
--- /dev/null
+++ b/neutron/files/ocata/l3_agent.ini
@@ -0,0 +1,322 @@
+{%- if pillar.neutron.gateway is defined %}
+{%- from "neutron/map.jinja" import gateway as neutron with context %}
+{%- else %}
+{%- from "neutron/map.jinja" import compute as neutron with context %}
+{%- endif %}
+
+[DEFAULT]
+
+#
+# From neutron.base.agent
+#
+
+# Name of Open vSwitch bridge to use (string value)
+#ovs_integration_bridge = br-int
+
+# Uses veth for an OVS interface or not. Support kernels with limited namespace
+# support (e.g. RHEL 6.5) so long as ovs_use_veth is set to True. (boolean
+# value)
+#ovs_use_veth = false
+
+# The driver used to manage the virtual interface. (string value)
+#interface_driver = <None>
+interface_driver = neutron.agent.linux.interface.OVSInterfaceDriver
+
+# Timeout in seconds for ovs-vsctl commands. If the timeout expires, ovs
+# commands will fail with ALARMCLOCK error. (integer value)
+#ovs_vsctl_timeout = 10
+
+#
+# From neutron.l3.agent
+#
+
+# The working mode for the agent. Allowed modes are: 'legacy' - this preserves
+# the existing behavior where the L3 agent is deployed on a centralized
+# networking node to provide L3 services like DNAT, and SNAT. Use this mode if
+# you do not want to adopt DVR. 'dvr' - this mode enables DVR functionality and
+# must be used for an L3 agent that runs on a compute host. 'dvr_snat' - this
+# enables centralized SNAT support in conjunction with DVR. This mode must be
+# used for an L3 agent running on a centralized node (or in single-host
+# deployments, e.g. devstack) (string value)
+# Allowed values: dvr, dvr_snat, legacy
+#agent_mode = legacy
+agent_mode = {{ neutron.agent_mode }}
+
+# TCP Port used by Neutron metadata namespace proxy. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#metadata_port = 9697
+metadata_port = 8775
+
+# DEPRECATED: Send this many gratuitous ARPs for HA setup, if less than or
+# equal to 0, the feature is disabled (integer value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#send_arp_for_ha = 3
+
+# Indicates that this L3 agent should also handle routers that do not have an
+# external network gateway configured. This option should be True only for a
+# single agent in a Neutron deployment, and may be False for all agents if all
+# routers must have an external network gateway. (boolean value)
+#handle_internal_only_routers = true
+
+# When external_network_bridge is set, each L3 agent can be associated with no
+# more than one external network. This value should be set to the UUID of that
+# external network. To allow L3 agent support multiple external networks, both
+# the external_network_bridge and gateway_external_network_id must be left
+# empty. (string value)
+#gateway_external_network_id =
+
+# With IPv6, the network used for the external gateway does not need to have an
+# associated subnet, since the automatically assigned link-local address (LLA)
+# can be used. However, an IPv6 gateway address is needed for use as the next-
+# hop for the default route. If no IPv6 gateway address is configured here,
+# (and only then) the neutron router will be configured to get its default
+# route from router advertisements (RAs) from the upstream router; in which
+# case the upstream router must also be configured to send these RAs. The
+# ipv6_gateway, when configured, should be the LLA of the interface on the
+# upstream router. If a next-hop using a global unique address (GUA) is
+# desired, it needs to be done via a subnet allocated to the network and not
+# through this parameter. (string value)
+#ipv6_gateway =
+
+# Driver used for ipv6 prefix delegation. This needs to be an entry point
+# defined in the neutron.agent.linux.pd_drivers namespace. See setup.cfg for
+# entry points included with the neutron source. (string value)
+#prefix_delegation_driver = dibbler
+
+# Allow running metadata proxy. (boolean value)
+#enable_metadata_proxy = true
+
+# Iptables mangle mark used to mark metadata valid requests. This mark will be
+# masked with 0xffff so that only the lower 16 bits will be used. (string
+# value)
+#metadata_access_mark = 0x1
+
+# Iptables mangle mark used to mark ingress from external network. This mark
+# will be masked with 0xffff so that only the lower 16 bits will be used.
+# (string value)
+#external_ingress_mark = 0x2
+
+# DEPRECATED: Name of bridge used for external network traffic. When this
+# parameter is set, the L3 agent will plug an interface directly into an
+# external bridge which will not allow any wiring by the L2 agent. Using this
+# will result in incorrect port statuses. This option is deprecated and will be
+# removed in Ocata. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#external_network_bridge =
+external_network_bridge =
+
+# Seconds between running periodic tasks. (integer value)
+#periodic_interval = 40
+
+# Number of separate API worker processes for service. If not specified, the
+# default is equal to the number of CPUs available for best performance.
+# (integer value)
+#api_workers = <None>
+
+# Number of RPC worker processes for service. (integer value)
+#rpc_workers = 1
+
+# Number of RPC worker processes dedicated to state reports queue. (integer
+# value)
+#rpc_state_report_workers = 1
+
+# Range of seconds to randomly delay when starting the periodic task scheduler
+# to reduce stampeding. (Disable by setting to 0) (integer value)
+#periodic_fuzzy_delay = 5
+
+# Location to store keepalived/conntrackd config files (string value)
+#ha_confs_path = $state_path/ha_confs
+
+# VRRP authentication type (string value)
+# Allowed values: AH, PASS
+#ha_vrrp_auth_type = PASS
+
+# VRRP authentication password (string value)
+#ha_vrrp_auth_password = <None>
+
+# The advertisement interval in seconds (integer value)
+#ha_vrrp_advert_int = 2
+
+# Number of concurrent threads for keepalived server connection requests. More
+# threads create a higher CPU load on the agent node. (integer value)
+# Minimum value: 1
+#ha_keepalived_state_change_server_threads = (1 + <num_of_cpus>) / 2
+
+# The VRRP health check interval in seconds. Values > 0 enable VRRP health
+# checks. Setting it to 0 disables VRRP health checks. Recommended value is 5.
+# This will cause pings to be sent to the gateway IP address(es) - requires
+# ICMP_ECHO_REQUEST to be enabled on the gateway. If gateway fails, all routers
+# will be reported as master, and master election will be repeated in round-
+# robin fashion, until one of the router restore the gateway connection.
+# (integer value)
+#ha_vrrp_health_check_interval = 0
+
+# Service to handle DHCPv6 Prefix delegation. (string value)
+#pd_dhcp_driver = dibbler
+
+# Location to store IPv6 RA config files (string value)
+#ra_confs = $state_path/ra
+
+# MinRtrAdvInterval setting for radvd.conf (integer value)
+#min_rtr_adv_interval = 30
+
+# MaxRtrAdvInterval setting for radvd.conf (integer value)
+#max_rtr_adv_interval = 100
+
+#
+# From oslo.log
+#
+
+# If set to true, the logging level will be set to DEBUG instead of the default
+# INFO level. (boolean value)
+# Note: This option can be changed without restarting.
+#debug = false
+debug = False
+
+# DEPRECATED: If set to false, the logging level will be set to WARNING instead
+# of the default INFO level. (boolean value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#verbose = true
+
+# The name of a logging configuration file. This file is appended to any
+# existing logging configuration files. For details about logging configuration
+# files, see the Python logging module documentation. Note that when logging
+# configuration files are used then all logging configuration is set in the
+# configuration file and other logging configuration options are ignored (for
+# example, logging_context_format_string). (string value)
+# Note: This option can be changed without restarting.
+# Deprecated group/name - [DEFAULT]/log_config
+#log_config_append = <None>
+
+# Defines the format string for %%(asctime)s in log records. Default:
+# %(default)s . This option is ignored if log_config_append is set. (string
+# value)
+#log_date_format = %Y-%m-%d %H:%M:%S
+
+# (Optional) Name of log file to send logging output to. If no default is set,
+# logging will go to stderr as defined by use_stderr. This option is ignored if
+# log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logfile
+#log_file = <None>
+
+# (Optional) The base directory used for relative log_file paths. This option
+# is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logdir
+#log_dir = <None>
+
+# Uses logging handler designed to watch file system. When log file is moved or
+# removed this handler will open a new log file with specified path
+# instantaneously. It makes sense only if log_file option is specified and
+# Linux platform is used. This option is ignored if log_config_append is set.
+# (boolean value)
+#watch_log_file = false
+
+# Use syslog for logging. Existing syslog format is DEPRECATED and will be
+# changed later to honor RFC5424. This option is ignored if log_config_append
+# is set. (boolean value)
+#use_syslog = false
+
+# Syslog facility to receive log lines. This option is ignored if
+# log_config_append is set. (string value)
+#syslog_log_facility = LOG_USER
+
+# Log output to standard error. This option is ignored if log_config_append is
+# set. (boolean value)
+#use_stderr = false
+
+# Format string to use for log messages with context. (string value)
+#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
+
+# Format string to use for log messages when context is undefined. (string
+# value)
+#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
+
+# Additional data to append to log message when logging level for the message
+# is DEBUG. (string value)
+#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
+
+# Prefix each line of exception output with this format. (string value)
+#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
+
+# Defines the format string for %(user_identity)s that is used in
+# logging_context_format_string. (string value)
+#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
+
+# List of package logging levels in logger=LEVEL pairs. This option is ignored
+# if log_config_append is set. (list value)
+#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
+
+# Enables or disables publication of error events. (boolean value)
+#publish_errors = false
+
+# The format for an instance that is passed with the log message. (string
+# value)
+#instance_format = "[instance: %(uuid)s] "
+
+# The format for an instance UUID that is passed with the log message. (string
+# value)
+#instance_uuid_format = "[instance: %(uuid)s] "
+
+# Interval, number of seconds, of log rate limiting. (integer value)
+#rate_limit_interval = 0
+
+# Maximum number of logged messages per rate_limit_interval. (integer value)
+#rate_limit_burst = 0
+
+# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG
+# or empty string. Logs with level greater or equal to rate_limit_except_level
+# are not filtered. An empty string means that all levels are filtered. (string
+# value)
+#rate_limit_except_level = CRITICAL
+
+# Enables or disables fatal status of deprecations. (boolean value)
+#fatal_deprecations = false
+
+
+[agent]
+
+#
+# From neutron.az.agent
+#
+
+# Availability zone of this node (string value)
+#availability_zone = nova
+
+#
+# From neutron.base.agent
+#
+
+# Seconds between nodes reporting state to server; should be less than
+# agent_down_time, best if it is half or less than agent_down_time. (floating
+# point value)
+#report_interval = 30
+
+# Log agent heartbeats (boolean value)
+#log_agent_heartbeats = false
+
+#
+# From neutron.l3.agent
+#
+
+# Extensions list to use (list value)
+#extensions =
+
+
+[ovs]
+
+#
+# From neutron.base.agent
+#
+
+# The interface for interacting with the OVSDB (string value)
+# Allowed values: vsctl, native
+#ovsdb_interface = native
+
+# The connection string for the OVSDB backend. Will be used by ovsdb-client
+# when monitoring and used for the all ovsdb commands when native
+# ovsdb_interface is enabled (string value)
+#ovsdb_connection = tcp:127.0.0.1:6640
diff --git a/neutron/files/ocata/metadata_agent.ini b/neutron/files/ocata/metadata_agent.ini
new file mode 100644
index 0000000..9772781
--- /dev/null
+++ b/neutron/files/ocata/metadata_agent.ini
@@ -0,0 +1,275 @@
+{%- if pillar.neutron.gateway is defined %}
+{%- from "neutron/map.jinja" import gateway as neutron with context %}
+{%- else %}
+{%- from "neutron/map.jinja" import compute as neutron with context %}
+{%- endif %}
+[DEFAULT]
+
+#
+# From neutron.metadata.agent
+#
+
+# Location for Metadata Proxy UNIX domain socket. (string value)
+#metadata_proxy_socket = $state_path/metadata_proxy
+
+# User (uid or name) running metadata proxy after its initialization (if empty:
+# agent effective user). (string value)
+#metadata_proxy_user =
+
+# Group (gid or name) running metadata proxy after its initialization (if
+# empty: agent effective group). (string value)
+#metadata_proxy_group =
+
+# Certificate Authority public key (CA cert) file for ssl (string value)
+#auth_ca_cert = <None>
+
+# IP address used by Nova metadata server. (string value)
+#nova_metadata_ip = 127.0.0.1
+nova_metadata_ip = {{ neutron.metadata.host }}
+
+# TCP Port used by Nova metadata server. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#nova_metadata_port = 8775
+
+# When proxying metadata requests, Neutron signs the Instance-ID header with a
+# shared secret to prevent spoofing. You may select any string for a secret,
+# but it must match here and in the configuration used by the Nova Metadata
+# Server. NOTE: Nova uses the same config key, but in [neutron] section.
+# (string value)
+#metadata_proxy_shared_secret =
+metadata_proxy_shared_secret = {{ neutron.metadata.password }}
+
+# Protocol to access nova metadata, http or https (string value)
+# Allowed values: http, https
+#nova_metadata_protocol = http
+nova_metadata_protocol = http
+
+# Allow to perform insecure SSL (https) requests to nova metadata (boolean
+# value)
+#nova_metadata_insecure = false
+
+# Client certificate for nova metadata api server. (string value)
+#nova_client_cert =
+
+# Private key of client certificate. (string value)
+#nova_client_priv_key =
+
+# Metadata Proxy UNIX domain socket mode, 4 values allowed: 'deduce': deduce
+# mode from metadata_proxy_user/group values, 'user': set metadata proxy socket
+# mode to 0o644, to use when metadata_proxy_user is agent effective user or
+# root, 'group': set metadata proxy socket mode to 0o664, to use when
+# metadata_proxy_group is agent effective group or root, 'all': set metadata
+# proxy socket mode to 0o666, to use otherwise. (string value)
+# Allowed values: deduce, user, group, all
+#metadata_proxy_socket_mode = deduce
+
+# Number of separate worker processes for metadata server (defaults to half of
+# the number of CPUs) (integer value)
+#metadata_workers = 2
+
+# Number of backlog requests to configure the metadata server socket with
+# (integer value)
+#metadata_backlog = 4096
+
+# DEPRECATED: URL to connect to the cache back end. This option is deprecated
+# in the Newton release and will be removed. Please add a [cache] group for
+# oslo.cache in your neutron.conf and add "enable" and "backend" options in
+# this section. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#cache_url =
+
+#
+# From oslo.log
+#
+
+# If set to true, the logging level will be set to DEBUG instead of the default
+# INFO level. (boolean value)
+# Note: This option can be changed without restarting.
+#debug = false
+debug = False
+
+# DEPRECATED: If set to false, the logging level will be set to WARNING instead
+# of the default INFO level. (boolean value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#verbose = true
+
+# The name of a logging configuration file. This file is appended to any
+# existing logging configuration files. For details about logging configuration
+# files, see the Python logging module documentation. Note that when logging
+# configuration files are used then all logging configuration is set in the
+# configuration file and other logging configuration options are ignored (for
+# example, logging_context_format_string). (string value)
+# Note: This option can be changed without restarting.
+# Deprecated group/name - [DEFAULT]/log_config
+#log_config_append = <None>
+
+# Defines the format string for %%(asctime)s in log records. Default:
+# %(default)s . This option is ignored if log_config_append is set. (string
+# value)
+#log_date_format = %Y-%m-%d %H:%M:%S
+
+# (Optional) Name of log file to send logging output to. If no default is set,
+# logging will go to stderr as defined by use_stderr. This option is ignored if
+# log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logfile
+#log_file = <None>
+
+# (Optional) The base directory used for relative log_file paths. This option
+# is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logdir
+#log_dir = <None>
+
+# Uses logging handler designed to watch file system. When log file is moved or
+# removed this handler will open a new log file with specified path
+# instantaneously. It makes sense only if log_file option is specified and
+# Linux platform is used. This option is ignored if log_config_append is set.
+# (boolean value)
+#watch_log_file = false
+
+# Use syslog for logging. Existing syslog format is DEPRECATED and will be
+# changed later to honor RFC5424. This option is ignored if log_config_append
+# is set. (boolean value)
+#use_syslog = false
+
+# Syslog facility to receive log lines. This option is ignored if
+# log_config_append is set. (string value)
+#syslog_log_facility = LOG_USER
+
+# Log output to standard error. This option is ignored if log_config_append is
+# set. (boolean value)
+#use_stderr = false
+
+# Format string to use for log messages with context. (string value)
+#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
+
+# Format string to use for log messages when context is undefined. (string
+# value)
+#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
+
+# Additional data to append to log message when logging level for the message
+# is DEBUG. (string value)
+#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
+
+# Prefix each line of exception output with this format. (string value)
+#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
+
+# Defines the format string for %(user_identity)s that is used in
+# logging_context_format_string. (string value)
+#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
+
+# List of package logging levels in logger=LEVEL pairs. This option is ignored
+# if log_config_append is set. (list value)
+#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
+
+# Enables or disables publication of error events. (boolean value)
+#publish_errors = false
+
+# The format for an instance that is passed with the log message. (string
+# value)
+#instance_format = "[instance: %(uuid)s] "
+
+# The format for an instance UUID that is passed with the log message. (string
+# value)
+#instance_uuid_format = "[instance: %(uuid)s] "
+
+# Interval, number of seconds, of log rate limiting. (integer value)
+#rate_limit_interval = 0
+
+# Maximum number of logged messages per rate_limit_interval. (integer value)
+#rate_limit_burst = 0
+
+# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG
+# or empty string. Logs with level greater or equal to rate_limit_except_level
+# are not filtered. An empty string means that all levels are filtered. (string
+# value)
+#rate_limit_except_level = CRITICAL
+
+# Enables or disables fatal status of deprecations. (boolean value)
+#fatal_deprecations = false
+
+
+[agent]
+
+#
+# From neutron.metadata.agent
+#
+
+# Seconds between nodes reporting state to server; should be less than
+# agent_down_time, best if it is half or less than agent_down_time. (floating
+# point value)
+#report_interval = 30
+
+# Log agent heartbeats (boolean value)
+#log_agent_heartbeats = false
+
+
+[cache]
+
+#
+# From oslo.cache
+#
+
+# Prefix for building the configuration dictionary for the cache region. This
+# should not need to be changed unless there is another dogpile.cache region
+# with the same configuration name. (string value)
+#config_prefix = cache.oslo
+
+# Default TTL, in seconds, for any cached item in the dogpile.cache region.
+# This applies to any cached method that doesn't have an explicit cache
+# expiration time defined for it. (integer value)
+#expiration_time = 600
+
+# Dogpile.cache backend module. It is recommended that Memcache or Redis
+# (dogpile.cache.redis) be used in production deployments. For eventlet-based
+# or highly threaded servers, Memcache with pooling (oslo_cache.memcache_pool)
+# is recommended. For low thread servers, dogpile.cache.memcached is
+# recommended. Test environments with a single instance of the server can use
+# the dogpile.cache.memory backend. (string value)
+#backend = dogpile.cache.null
+
+# Arguments supplied to the backend module. Specify this option once per
+# argument to be passed to the dogpile.cache backend. Example format:
+# "<argname>:<value>". (multi valued)
+#backend_argument =
+
+# Proxy classes to import that will affect the way the dogpile.cache backend
+# functions. See the dogpile.cache documentation on changing-backend-behavior.
+# (list value)
+#proxies =
+
+# Global toggle for caching. (boolean value)
+#enabled = false
+
+# Extra debugging from the cache backend (cache keys, get/set/delete/etc
+# calls). This is only really useful if you need to see the specific cache-
+# backend get/set/delete calls with the keys/values. Typically this should be
+# left set to false. (boolean value)
+#debug_cache_backend = false
+
+# Memcache servers in the format of "host:port". (dogpile.cache.memcache and
+# oslo_cache.memcache_pool backends only). (list value)
+#memcache_servers = localhost:11211
+
+# Number of seconds memcached server is considered dead before it is tried
+# again. (dogpile.cache.memcache and oslo_cache.memcache_pool backends only).
+# (integer value)
+#memcache_dead_retry = 300
+
+# Timeout in seconds for every call to a server. (dogpile.cache.memcache and
+# oslo_cache.memcache_pool backends only). (integer value)
+#memcache_socket_timeout = 3
+
+# Max total number of open connections to every memcached server.
+# (oslo_cache.memcache_pool backend only). (integer value)
+#memcache_pool_maxsize = 10
+
+# Number of seconds a connection to memcached is held unused in the pool before
+# it is closed. (oslo_cache.memcache_pool backend only). (integer value)
+#memcache_pool_unused_timeout = 60
+
+# Number of seconds that an operation will wait to get a memcache client
+# connection. (integer value)
+#memcache_pool_connection_get_timeout = 10
diff --git a/neutron/files/ocata/ml2_conf.ini b/neutron/files/ocata/ml2_conf.ini
new file mode 100644
index 0000000..736ce2d
--- /dev/null
+++ b/neutron/files/ocata/ml2_conf.ini
@@ -0,0 +1,266 @@
+{%- from "neutron/map.jinja" import server with context %}
+[DEFAULT]
+
+#
+# From oslo.log
+#
+
+# If set to true, the logging level will be set to DEBUG instead of the default
+# INFO level. (boolean value)
+# Note: This option can be changed without restarting.
+#debug = false
+
+# DEPRECATED: If set to false, the logging level will be set to WARNING instead
+# of the default INFO level. (boolean value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#verbose = true
+
+# The name of a logging configuration file. This file is appended to any
+# existing logging configuration files. For details about logging configuration
+# files, see the Python logging module documentation. Note that when logging
+# configuration files are used then all logging configuration is set in the
+# configuration file and other logging configuration options are ignored (for
+# example, logging_context_format_string). (string value)
+# Note: This option can be changed without restarting.
+# Deprecated group/name - [DEFAULT]/log_config
+#log_config_append = <None>
+
+# Defines the format string for %%(asctime)s in log records. Default:
+# %(default)s . This option is ignored if log_config_append is set. (string
+# value)
+#log_date_format = %Y-%m-%d %H:%M:%S
+
+# (Optional) Name of log file to send logging output to. If no default is set,
+# logging will go to stderr as defined by use_stderr. This option is ignored if
+# log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logfile
+#log_file = <None>
+
+# (Optional) The base directory used for relative log_file paths. This option
+# is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logdir
+#log_dir = <None>
+
+# Uses logging handler designed to watch file system. When log file is moved or
+# removed this handler will open a new log file with specified path
+# instantaneously. It makes sense only if log_file option is specified and
+# Linux platform is used. This option is ignored if log_config_append is set.
+# (boolean value)
+#watch_log_file = false
+
+# Use syslog for logging. Existing syslog format is DEPRECATED and will be
+# changed later to honor RFC5424. This option is ignored if log_config_append
+# is set. (boolean value)
+#use_syslog = false
+
+# Syslog facility to receive log lines. This option is ignored if
+# log_config_append is set. (string value)
+#syslog_log_facility = LOG_USER
+
+# Log output to standard error. This option is ignored if log_config_append is
+# set. (boolean value)
+#use_stderr = false
+
+# Format string to use for log messages with context. (string value)
+#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
+
+# Format string to use for log messages when context is undefined. (string
+# value)
+#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
+
+# Additional data to append to log message when logging level for the message
+# is DEBUG. (string value)
+#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
+
+# Prefix each line of exception output with this format. (string value)
+#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
+
+# Defines the format string for %(user_identity)s that is used in
+# logging_context_format_string. (string value)
+#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
+
+# List of package logging levels in logger=LEVEL pairs. This option is ignored
+# if log_config_append is set. (list value)
+#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
+
+# Enables or disables publication of error events. (boolean value)
+#publish_errors = false
+
+# The format for an instance that is passed with the log message. (string
+# value)
+#instance_format = "[instance: %(uuid)s] "
+
+# The format for an instance UUID that is passed with the log message. (string
+# value)
+#instance_uuid_format = "[instance: %(uuid)s] "
+
+# Interval, number of seconds, of log rate limiting. (integer value)
+#rate_limit_interval = 0
+
+# Maximum number of logged messages per rate_limit_interval. (integer value)
+#rate_limit_burst = 0
+
+# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG
+# or empty string. Logs with level greater or equal to rate_limit_except_level
+# are not filtered. An empty string means that all levels are filtered. (string
+# value)
+#rate_limit_except_level = CRITICAL
+
+# Enables or disables fatal status of deprecations. (boolean value)
+#fatal_deprecations = false
+
+
+[ml2]
+
+#
+# From neutron.ml2
+#
+
+# List of network type driver entrypoints to be loaded from the
+# neutron.ml2.type_drivers namespace. (list value)
+#type_drivers = local,flat,vlan,gre,vxlan,geneve
+type_drivers = local,flat,vlan,gre,vxlan
+
+# Ordered list of network_types to allocate as tenant networks. The default
+# value 'local' is useful for single-box testing but provides no connectivity
+# between hosts. (list value)
+#tenant_network_types = local
+tenant_network_types = {{ server.backend.tenant_network_types }}
+
+# An ordered list of networking mechanism driver entrypoints to be loaded from
+# the neutron.ml2.mechanism_drivers namespace. (list value)
+#mechanism_drivers =
+mechanism_drivers ={%- for backend_name, mechanism in server.backend.get('mechanism', {}).iteritems() %}{{ mechanism.driver }},{%- endfor %}l2population
+
+# An ordered list of extension driver entrypoints to be loaded from the
+# neutron.ml2.extension_drivers namespace. For example: extension_drivers =
+# port_security,qos (list value)
+#extension_drivers =
+extension_drivers = port_security
+
+# Maximum size of an IP packet (MTU) that can traverse the underlying physical
+# network infrastructure without fragmentation when using an overlay/tunnel
+# protocol. This option allows specifying a physical network MTU value that
+# differs from the default global_physnet_mtu value. (integer value)
+#path_mtu = 0
+path_mtu = {{ server.get('global_physnet_mtu', '1500') }}
+
+# A list of mappings of physical networks to MTU values. The format of the
+# mapping is <physnet>:<mtu val>. This mapping allows specifying a physical
+# network MTU value that differs from the default global_physnet_mtu value.
+# (list value)
+#physical_network_mtus =
+physical_network_mtus =physnet1:{{ server.backend.get('external_mtu', '1500') }}{%- if "vlan" in server.backend.tenant_network_types %},physnet2:{{ server.backend.get('external_mtu', '1500') }}{%- endif %}
+
+# Default network type for external networks when no provider attributes are
+# specified. By default it is None, which means that if provider attributes are
+# not specified while creating external networks then they will have the same
+# type as tenant networks. Allowed values for external_network_type config
+# option depend on the network type values configured in type_drivers config
+# option. (string value)
+#external_network_type = <None>
+
+# IP version of all overlay (tunnel) network endpoints. Use a value of 4 for
+# IPv4 or 6 for IPv6. (integer value)
+#overlay_ip_version = 4
+
+
+[ml2_type_flat]
+
+#
+# From neutron.ml2
+#
+
+# List of physical_network names with which flat networks can be created. Use
+# default '*' to allow flat networks with arbitrary physical_network names. Use
+# an empty list to disable flat networks. (list value)
+#flat_networks = *
+flat_networks = *
+
+
+[ml2_type_geneve]
+
+#
+# From neutron.ml2
+#
+
+# Comma-separated list of <vni_min>:<vni_max> tuples enumerating ranges of
+# Geneve VNI IDs that are available for tenant network allocation (list value)
+#vni_ranges =
+
+# Geneve encapsulation header size is dynamic, this value is used to calculate
+# the maximum MTU for the driver. This is the sum of the sizes of the outer ETH
+# + IP + UDP + GENEVE header sizes. The default size for this field is 50,
+# which is the size of the Geneve header without any additional option headers.
+# (integer value)
+#max_header_size = 30
+
+
+[ml2_type_gre]
+
+#
+# From neutron.ml2
+#
+
+# Comma-separated list of <tun_min>:<tun_max> tuples enumerating ranges of GRE
+# tunnel IDs that are available for tenant network allocation (list value)
+#tunnel_id_ranges =
+tunnel_id_ranges =2:65535
+
+
+[ml2_type_vlan]
+
+#
+# From neutron.ml2
+#
+
+# List of <physical_network>:<vlan_min>:<vlan_max> or <physical_network>
+# specifying physical_network names usable for VLAN provider and tenant
+# networks, as well as ranges of VLAN tags on each available for allocation to
+# tenant networks. (list value)
+#network_vlan_ranges =
+network_vlan_ranges = physnet1{%- if server.backend.external_vlan_range is defined %}:{{ server.backend.external_vlan_range }}{%- endif %}{%- if "vlan" in server.backend.tenant_network_types %},physnet2:{{ server.backend.tenant_vlan_range }}{%- endif %}
+
+
+[ml2_type_vxlan]
+
+#
+# From neutron.ml2
+#
+
+# Comma-separated list of <vni_min>:<vni_max> tuples enumerating ranges of
+# VXLAN VNI IDs that are available for tenant network allocation (list value)
+#vni_ranges =
+vni_ranges =2:65535
+
+# Multicast group for VXLAN. When configured, will enable sending all broadcast
+# traffic to this multicast group. When left unconfigured, will disable
+# multicast VXLAN mode. (string value)
+#vxlan_group = <None>
+vxlan_group = 224.0.0.1
+
+
+[securitygroup]
+
+#
+# From neutron.ml2
+#
+
+# Driver for security groups firewall in the L2 agent (string value)
+#firewall_driver = <None>
+{%- if server.dpdk %}
+firewall_driver = openvswitch
+{%- else %}
+firewall_driver = neutron.agent.linux.iptables_firewall.OVSHybridIptablesFirewallDriver
+{%- endif %}
+
+# Controls whether the neutron security group API is enabled in the server. It
+# should be false when using no security groups or using the nova security
+# group API. (boolean value)
+#enable_security_group = true
+enable_security_group = True
+
+# Use ipset to speed-up the iptables based security groups. Enabling ipset
+# support requires that ipset is installed on L2 agent node. (boolean value)
+#enable_ipset = true
diff --git a/neutron/files/ocata/neutron-generic.conf.Debian b/neutron/files/ocata/neutron-generic.conf.Debian
new file mode 100644
index 0000000..2687898
--- /dev/null
+++ b/neutron/files/ocata/neutron-generic.conf.Debian
@@ -0,0 +1,2077 @@
+{%- if pillar.neutron.gateway is defined %}
+{%- from "neutron/map.jinja" import gateway as neutron with context %}
+{%- else %}
+{%- from "neutron/map.jinja" import compute as neutron with context %}
+{%- endif %}
+[DEFAULT]
+
+#
+# From neutron
+#
+
+# Where to store Neutron state files. This directory must be writable by the
+# agent. (string value)
+#state_path = /var/lib/neutron
+state_path = /var/lib/neutron
+
+# The host IP to bind to (string value)
+#bind_host = 0.0.0.0
+
+# The port to bind to (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#bind_port = 9696
+
+# The path for API extensions. Note that this can be a colon-separated list of
+# paths. For example: api_extensions_path =
+# extensions:/path/to/more/exts:/even/more/exts. The __path__ of
+# neutron.extensions is appended to this, so if your extensions are in there
+# you don't need to specify them here. (string value)
+#api_extensions_path =
+
+# The type of authentication to use (string value)
+#auth_strategy = keystone
+auth_strategy = keystone
+
+{% if neutron.backend.engine == "ml2" %}
+
+core_plugin = neutron.plugins.ml2.plugin.Ml2Plugin
+
+service_plugins =neutron.services.l3_router.l3_router_plugin.L3RouterPlugin,neutron.services.metering.metering_plugin.MeteringPlugin
+
+{% endif %}
+
+# The service plugins Neutron will use (list value)
+#service_plugins =
+
+# The base MAC address Neutron will use for VIFs. The first 3 octets will
+# remain unchanged. If the 4th octet is not 00, it will also be used. The
+# others will be randomly generated. (string value)
+#base_mac = fa:16:3e:00:00:00
+
+# Allow the usage of the bulk API (boolean value)
+#allow_bulk = true
+
+# The maximum number of items returned in a single response, value was
+# 'infinite' or negative integer means no limit (string value)
+#pagination_max_limit = -1
+
+# Default value of availability zone hints. The availability zone aware
+# schedulers use this when the resources availability_zone_hints is empty.
+# Multiple availability zones can be specified by a comma separated string.
+# This value can be empty. In this case, even if availability_zone_hints for a
+# resource is empty, availability zone is considered for high availability
+# while scheduling the resource. (list value)
+#default_availability_zones =
+
+# Maximum number of DNS nameservers per subnet (integer value)
+#max_dns_nameservers = 5
+
+# Maximum number of host routes per subnet (integer value)
+#max_subnet_host_routes = 20
+
+# DEPRECATED: Maximum number of fixed ips per port. This option is deprecated
+# and will be removed in the Ocata release. (integer value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#max_fixed_ips_per_port = 5
+
+# Enables IPv6 Prefix Delegation for automatic subnet CIDR allocation. Set to
+# True to enable IPv6 Prefix Delegation for subnet allocation in a PD-capable
+# environment. Users making subnet creation requests for IPv6 subnets without
+# providing a CIDR or subnetpool ID will be given a CIDR via the Prefix
+# Delegation mechanism. Note that enabling PD will override the behavior of the
+# default IPv6 subnetpool. (boolean value)
+#ipv6_pd_enabled = false
+
+# DHCP lease duration (in seconds). Use -1 to tell dnsmasq to use infinite
+# lease times. (integer value)
+#dhcp_lease_duration = 86400
+dhcp_lease_duration = 600
+
+# Domain to use for building the hostnames (string value)
+#dns_domain = openstacklocal
+
+# Driver for external DNS integration. (string value)
+#external_dns_driver = <None>
+
+# Allow sending resource operation notification to DHCP agent (boolean value)
+#dhcp_agent_notification = true
+
+# Allow overlapping IP support in Neutron. Attention: the following parameter
+# MUST be set to False if Neutron is being used in conjunction with Nova
+# security groups. (boolean value)
+#allow_overlapping_ips = false
+allow_overlapping_ips = True
+
+# Hostname to be used by the Neutron server, agents and services running on
+# this machine. All the agents and services running on this machine must use
+# the same host value. (string value)
+#host = example.domain
+
+# Send notification to nova when port status changes (boolean value)
+#notify_nova_on_port_status_changes = true
+notify_nova_on_port_status_changes = True
+
+# Send notification to nova when port data (fixed_ips/floatingip) changes so
+# nova can update its cache. (boolean value)
+#notify_nova_on_port_data_changes = true
+notify_nova_on_port_data_changes = True
+
+# Number of seconds between sending events to nova if there are any events to
+# send. (integer value)
+#send_events_interval = 2
+
+# Neutron IPAM (IP address management) driver to use. By default, the reference
+# implementation of the Neutron IPAM driver is used. (string value)
+#ipam_driver = internal
+
+# If True, then allow plugins that support it to create VLAN transparent
+# networks. (boolean value)
+#vlan_transparent = false
+
+# This will choose the web framework in which to run the Neutron API server.
+# 'pecan' is a new experimental rewrite of the API server. (string value)
+# Allowed values: legacy, pecan
+#web_framework = legacy
+
+# MTU of the underlying physical network. Neutron uses this value to calculate
+# MTU for all virtual network components. For flat and VLAN networks, neutron
+# uses this value without modification. For overlay networks such as VXLAN,
+# neutron automatically subtracts the overlay protocol overhead from this
+# value. Defaults to 1500, the standard value for Ethernet. (integer value)
+# Deprecated group/name - [ml2]/segment_mtu
+#global_physnet_mtu = 1500
+
+# Number of backlog requests to configure the socket with (integer value)
+#backlog = 4096
+
+# Number of seconds to keep retrying to listen (integer value)
+#retry_until_window = 30
+
+# Enable SSL on the API server (boolean value)
+#use_ssl = false
+
+# Seconds between running periodic tasks. (integer value)
+#periodic_interval = 40
+
+# Number of separate API worker processes for service. If not specified, the
+# default is equal to the number of CPUs available for best performance.
+# (integer value)
+#api_workers = <None>
+
+# Number of RPC worker processes for service. (integer value)
+#rpc_workers = 1
+
+# Number of RPC worker processes dedicated to state reports queue. (integer
+# value)
+#rpc_state_report_workers = 1
+
+# Range of seconds to randomly delay when starting the periodic task scheduler
+# to reduce stampeding. (Disable by setting to 0) (integer value)
+#periodic_fuzzy_delay = 5
+
+#
+# From neutron.agent
+#
+
+# The driver used to manage the virtual interface. (string value)
+#interface_driver = <None>
+
+# Location for Metadata Proxy UNIX domain socket. (string value)
+#metadata_proxy_socket = $state_path/metadata_proxy
+
+# User (uid or name) running metadata proxy after its initialization (if empty:
+# agent effective user). (string value)
+#metadata_proxy_user =
+
+# Group (gid or name) running metadata proxy after its initialization (if
+# empty: agent effective group). (string value)
+#metadata_proxy_group =
+
+# Enable/Disable log watch by metadata proxy. It should be disabled when
+# metadata_proxy_user/group is not allowed to read/write its log file and
+# copytruncate logrotate option must be used if logrotate is enabled on
+# metadata proxy log files. Option default value is deduced from
+# metadata_proxy_user: watch log is enabled if metadata_proxy_user is agent
+# effective user id/name. (boolean value)
+#metadata_proxy_watch_log = <None>
+
+#
+# From neutron.db
+#
+
+# Representing the resource type whose load is being reported by the agent.
+# This can be "networks", "subnets" or "ports". When specified (Default is
+# networks), the server will extract particular load sent as part of its agent
+# configuration object from the agent report state, which is the number of
+# resources being consumed, at every report_interval.dhcp_load_type can be used
+# in combination with network_scheduler_driver =
+# neutron.scheduler.dhcp_agent_scheduler.WeightScheduler When the
+# network_scheduler_driver is WeightScheduler, dhcp_load_type can be configured
+# to represent the choice for the resource being balanced. Example:
+# dhcp_load_type=networks (string value)
+# Allowed values: networks, subnets, ports
+#dhcp_load_type = networks
+
+# Agent starts with admin_state_up=False when enable_new_agents=False. In the
+# case, user's resources will not be scheduled automatically to the agent until
+# admin changes admin_state_up to True. (boolean value)
+#enable_new_agents = true
+
+# Maximum number of routes per router (integer value)
+#max_routes = 30
+
+# Define the default value of enable_snat if not provided in
+# external_gateway_info. (boolean value)
+#enable_snat_by_default = true
+
+# Driver to use for scheduling network to DHCP agent (string value)
+#network_scheduler_driver = neutron.scheduler.dhcp_agent_scheduler.WeightScheduler
+
+# Allow auto scheduling networks to DHCP agent. (boolean value)
+#network_auto_schedule = true
+
+# Automatically remove networks from offline DHCP agents. (boolean value)
+#allow_automatic_dhcp_failover = true
+
+# Number of DHCP agents scheduled to host a tenant network. If this number is
+# greater than 1, the scheduler automatically assigns multiple DHCP agents for
+# a given tenant network, providing high availability for DHCP service.
+# (integer value)
+#dhcp_agents_per_network = 1
+
+# Enable services on an agent with admin_state_up False. If this option is
+# False, when admin_state_up of an agent is turned False, services on it will
+# be disabled. Agents with admin_state_up False are not selected for automatic
+# scheduling regardless of this option. But manual scheduling to such agents is
+# available if this option is True. (boolean value)
+#enable_services_on_agents_with_admin_state_down = false
+
+# The base mac address used for unique DVR instances by Neutron. The first 3
+# octets will remain unchanged. If the 4th octet is not 00, it will also be
+# used. The others will be randomly generated. The 'dvr_base_mac' *must* be
+# different from 'base_mac' to avoid mixing them up with MAC's allocated for
+# tenant ports. A 4 octet example would be dvr_base_mac = fa:16:3f:4f:00:00.
+# The default is 3 octet (string value)
+#dvr_base_mac = fa:16:3f:00:00:00
+
+# System-wide flag to determine the type of router that tenants can create.
+# Only admin can override. (boolean value)
+#router_distributed = false
+
+# Driver to use for scheduling router to a default L3 agent (string value)
+#router_scheduler_driver = neutron.scheduler.l3_agent_scheduler.LeastRoutersScheduler
+
+# Allow auto scheduling of routers to L3 agent. (boolean value)
+#router_auto_schedule = true
+
+# Automatically reschedule routers from offline L3 agents to online L3 agents.
+# (boolean value)
+#allow_automatic_l3agent_failover = false
+
+# Enable HA mode for virtual routers. (boolean value)
+#l3_ha = false
+
+# Maximum number of L3 agents which a HA router will be scheduled on. If it is
+# set to 0 then the router will be scheduled on every agent. (integer value)
+#max_l3_agents_per_router = 3
+
+# Subnet used for the l3 HA admin network. (string value)
+#l3_ha_net_cidr = 169.254.192.0/18
+
+# The network type to use when creating the HA network for an HA router. By
+# default or if empty, the first 'tenant_network_types' is used. This is
+# helpful when the VRRP traffic should use a specific network which is not the
+# default one. (string value)
+#l3_ha_network_type =
+
+# The physical network name with which the HA network can be created. (string
+# value)
+#l3_ha_network_physical_name =
+
+#
+# From neutron.extensions
+#
+
+# Maximum number of allowed address pairs (integer value)
+#max_allowed_address_pair = 10
+
+#
+# From oslo.log
+#
+
+# If set to true, the logging level will be set to DEBUG instead of the default
+# INFO level. (boolean value)
+# Note: This option can be changed without restarting.
+#debug = false
+
+# DEPRECATED: If set to false, the logging level will be set to WARNING instead
+# of the default INFO level. (boolean value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#verbose = true
+verbose = true
+
+# The name of a logging configuration file. This file is appended to any
+# existing logging configuration files. For details about logging configuration
+# files, see the Python logging module documentation. Note that when logging
+# configuration files are used then all logging configuration is set in the
+# configuration file and other logging configuration options are ignored (for
+# example, logging_context_format_string). (string value)
+# Note: This option can be changed without restarting.
+# Deprecated group/name - [DEFAULT]/log_config
+#log_config_append = <None>
+
+# Defines the format string for %%(asctime)s in log records. Default:
+# %(default)s . This option is ignored if log_config_append is set. (string
+# value)
+#log_date_format = %Y-%m-%d %H:%M:%S
+
+# (Optional) Name of log file to send logging output to. If no default is set,
+# logging will go to stderr as defined by use_stderr. This option is ignored if
+# log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logfile
+#log_file = <None>
+
+# (Optional) The base directory used for relative log_file paths. This option
+# is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logdir
+#log_dir = <None>
+
+# Uses logging handler designed to watch file system. When log file is moved or
+# removed this handler will open a new log file with specified path
+# instantaneously. It makes sense only if log_file option is specified and
+# Linux platform is used. This option is ignored if log_config_append is set.
+# (boolean value)
+#watch_log_file = false
+
+# Use syslog for logging. Existing syslog format is DEPRECATED and will be
+# changed later to honor RFC5424. This option is ignored if log_config_append
+# is set. (boolean value)
+#use_syslog = false
+
+# Syslog facility to receive log lines. This option is ignored if
+# log_config_append is set. (string value)
+#syslog_log_facility = LOG_USER
+
+# Log output to standard error. This option is ignored if log_config_append is
+# set. (boolean value)
+#use_stderr = false
+
+# Format string to use for log messages with context. (string value)
+#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
+
+# Format string to use for log messages when context is undefined. (string
+# value)
+#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
+
+# Additional data to append to log message when logging level for the message
+# is DEBUG. (string value)
+#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
+
+# Prefix each line of exception output with this format. (string value)
+#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
+
+# Defines the format string for %(user_identity)s that is used in
+# logging_context_format_string. (string value)
+#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
+
+# List of package logging levels in logger=LEVEL pairs. This option is ignored
+# if log_config_append is set. (list value)
+#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
+
+# Enables or disables publication of error events. (boolean value)
+#publish_errors = false
+
+# The format for an instance that is passed with the log message. (string
+# value)
+#instance_format = "[instance: %(uuid)s] "
+
+# The format for an instance UUID that is passed with the log message. (string
+# value)
+#instance_uuid_format = "[instance: %(uuid)s] "
+
+# Interval, number of seconds, of log rate limiting. (integer value)
+#rate_limit_interval = 0
+
+# Maximum number of logged messages per rate_limit_interval. (integer value)
+#rate_limit_burst = 0
+
+# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG
+# or empty string. Logs with level greater or equal to rate_limit_except_level
+# are not filtered. An empty string means that all levels are filtered. (string
+# value)
+#rate_limit_except_level = CRITICAL
+
+# Enables or disables fatal status of deprecations. (boolean value)
+#fatal_deprecations = false
+
+#
+# From oslo.messaging
+#
+
+# Size of RPC connection pool. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_conn_pool_size
+#rpc_conn_pool_size = 30
+
+# The pool size limit for connections expiration policy (integer value)
+#conn_pool_min_size = 2
+
+# The time-to-live in sec of idle connections in the pool (integer value)
+#conn_pool_ttl = 1200
+
+# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
+# The "host" option should point or resolve to this address. (string value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_bind_address
+#rpc_zmq_bind_address = *
+
+# MatchMaker driver. (string value)
+# Allowed values: redis, sentinel, dummy
+# Deprecated group/name - [DEFAULT]/rpc_zmq_matchmaker
+#rpc_zmq_matchmaker = redis
+
+# Number of ZeroMQ contexts, defaults to 1. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_contexts
+#rpc_zmq_contexts = 1
+
+# Maximum number of ingress messages to locally buffer per topic. Default is
+# unlimited. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_topic_backlog
+#rpc_zmq_topic_backlog = <None>
+
+# Directory for holding IPC sockets. (string value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_ipc_dir
+#rpc_zmq_ipc_dir = /var/run/openstack
+
+# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
+# "host" option, if running Nova. (string value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_host
+#rpc_zmq_host = localhost
+
+# Number of seconds to wait before all pending messages will be sent after
+# closing a socket. The default value of -1 specifies an infinite linger
+# period. The value of 0 specifies no linger period. Pending messages shall be
+# discarded immediately when the socket is closed. Positive values specify an
+# upper bound for the linger period. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
+#zmq_linger = -1
+zmq_linger = 30
+
+# The default number of seconds that poll should wait. Poll raises timeout
+# exception when timeout expired. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_poll_timeout
+#rpc_poll_timeout = 1
+
+# Expiration timeout in seconds of a name service record about existing target
+# ( < 0 means no timeout). (integer value)
+# Deprecated group/name - [DEFAULT]/zmq_target_expire
+#zmq_target_expire = 300
+
+# Update period in seconds of a name service record about existing target.
+# (integer value)
+# Deprecated group/name - [DEFAULT]/zmq_target_update
+#zmq_target_update = 180
+
+# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
+# value)
+# Deprecated group/name - [DEFAULT]/use_pub_sub
+#use_pub_sub = false
+
+# Use ROUTER remote proxy. (boolean value)
+# Deprecated group/name - [DEFAULT]/use_router_proxy
+#use_router_proxy = false
+
+# This option makes direct connections dynamic or static. It makes sense only
+# with use_router_proxy=False which means to use direct connections for direct
+# message types (ignored otherwise). (boolean value)
+#use_dynamic_connections = false
+
+# How many additional connections to a host will be made for failover reasons.
+# This option is actual only in dynamic connections mode. (integer value)
+#zmq_failover_connections = 2
+
+# Minimal port number for random ports range. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+# Deprecated group/name - [DEFAULT]/rpc_zmq_min_port
+#rpc_zmq_min_port = 49153
+
+# Maximal port number for random ports range. (integer value)
+# Minimum value: 1
+# Maximum value: 65536
+# Deprecated group/name - [DEFAULT]/rpc_zmq_max_port
+#rpc_zmq_max_port = 65536
+
+# Number of retries to find free port number before fail with ZMQBindError.
+# (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_bind_port_retries
+#rpc_zmq_bind_port_retries = 100
+
+# Default serialization mechanism for serializing/deserializing
+# outgoing/incoming messages (string value)
+# Allowed values: json, msgpack
+# Deprecated group/name - [DEFAULT]/rpc_zmq_serialization
+#rpc_zmq_serialization = json
+
+# This option configures round-robin mode in zmq socket. True means not keeping
+# a queue when server side disconnects. False means to keep queue and messages
+# even if server is disconnected, when the server appears we send all
+# accumulated messages to it. (boolean value)
+#zmq_immediate = true
+
+# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
+# other negative value) means to skip any overrides and leave it to OS default;
+# 0 and 1 (or any other positive value) mean to disable and enable the option
+# respectively. (integer value)
+#zmq_tcp_keepalive = -1
+
+# The duration between two keepalive transmissions in idle condition. The unit
+# is platform dependent, for example, seconds in Linux, milliseconds in Windows
+# etc. The default value of -1 (or any other negative value and 0) means to
+# skip any overrides and leave it to OS default. (integer value)
+#zmq_tcp_keepalive_idle = -1
+
+# The number of retransmissions to be carried out before declaring that remote
+# end is not available. The default value of -1 (or any other negative value
+# and 0) means to skip any overrides and leave it to OS default. (integer
+# value)
+#zmq_tcp_keepalive_cnt = -1
+
+# The duration between two successive keepalive retransmissions, if
+# acknowledgement to the previous keepalive transmission is not received. The
+# unit is platform dependent, for example, seconds in Linux, milliseconds in
+# Windows etc. The default value of -1 (or any other negative value and 0)
+# means to skip any overrides and leave it to OS default. (integer value)
+#zmq_tcp_keepalive_intvl = -1
+
+# Maximum number of (green) threads to work concurrently. (integer value)
+#rpc_thread_pool_size = 100
+
+# Expiration timeout in seconds of a sent/received message after which it is
+# not tracked anymore by a client/server. (integer value)
+#rpc_message_ttl = 300
+
+# Wait for message acknowledgements from receivers. This mechanism works only
+# via proxy without PUB/SUB. (boolean value)
+#rpc_use_acks = false
+
+# Number of seconds to wait for an ack from a cast/call. After each retry
+# attempt this timeout is multiplied by some specified multiplier. (integer
+# value)
+#rpc_ack_timeout_base = 15
+
+# Number to multiply base ack timeout by after each retry attempt. (integer
+# value)
+#rpc_ack_timeout_multiplier = 2
+
+# Default number of message sending attempts in case of any problems occurred:
+# positive value N means at most N retries, 0 means no retries, None or -1 (or
+# any other negative values) mean to retry forever. This option is used only if
+# acknowledgments are enabled. (integer value)
+#rpc_retry_attempts = 3
+
+# List of publisher hosts SubConsumer can subscribe on. This option has higher
+# priority then the default publishers list taken from the matchmaker. (list
+# value)
+#subscribe_on =
+agent_down_time = 30
+
+# Size of executor thread pool. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
+#executor_thread_pool_size = 64
+executor_thread_pool_size = 70
+
+# Seconds to wait for a response from a call. (integer value)
+#rpc_response_timeout = 60
+rpc_response_timeout=60
+
+# A URL representing the messaging driver to use and its full configuration.
+# (string value)
+#transport_url = <None>
+{%- if neutron.message_queue.members is defined %}
+transport_url = rabbit://{% for member in neutron.message_queue.members -%}
+ {{ neutron.message_queue.user }}:{{ neutron.message_queue.password }}@{{ member.host }}:{{ member.get('port', 5672) }}
+ {%- if not loop.last -%},{%- endif -%}
+ {%- endfor -%}
+ /{{ neutron.message_queue.virtual_host }}
+{%- else %}
+transport_url = rabbit://{{ neutron.message_queue.user }}:{{ neutron.message_queue.password }}@{{ neutron.message_queue.host }}:{{ neutron.message_queue.port }}{{ neutron.message_queue.virtual_host }}
+{%- endif %}
+
+# DEPRECATED: The messaging driver to use, defaults to rabbit. Other drivers
+# include amqp and zmq. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rpc_backend = rabbit
+rpc_backend = rabbit
+
+# The default exchange under which topics are scoped. May be overridden by an
+# exchange name specified in the transport_url option. (string value)
+#control_exchange = neutron
+
+#
+# From oslo.service.wsgi
+#
+
+# File name for the paste.deploy config for api service (string value)
+#api_paste_config = api-paste.ini
+
+# A python format string that is used as the template to generate log lines.
+# The following values can beformatted into it: client_ip, date_time,
+# request_line, status_code, body_length, wall_seconds. (string value)
+#wsgi_log_format = %(client_ip)s "%(request_line)s" status: %(status_code)s len: %(body_length)s time: %(wall_seconds).7f
+
+# Sets the value of TCP_KEEPIDLE in seconds for each server socket. Not
+# supported on OS X. (integer value)
+#tcp_keepidle = 600
+
+# Size of the pool of greenthreads used by wsgi (integer value)
+#wsgi_default_pool_size = 100
+
+# Maximum line size of message headers to be accepted. max_header_line may need
+# to be increased when using large tokens (typically those generated when
+# keystone is configured to use PKI tokens with big service catalogs). (integer
+# value)
+#max_header_line = 16384
+
+# If False, closes the client socket connection explicitly. (boolean value)
+#wsgi_keep_alive = true
+
+# Timeout for client connections' socket operations. If an incoming connection
+# is idle for this number of seconds it will be closed. A value of '0' means
+# wait forever. (integer value)
+#client_socket_timeout = 900
+
+
+[agent]
+
+#
+# From neutron.agent
+#
+
+# Root helper application. Use 'sudo neutron-rootwrap
+# /etc/neutron/rootwrap.conf' to use the real root filter facility. Change to
+# 'sudo' to skip the filtering and just run the command directly. (string
+# value)
+root_helper = sudo /usr/bin/neutron-rootwrap /etc/neutron/rootwrap.conf
+
+# Use the root helper when listing the namespaces on a system. This may not be
+# required depending on the security configuration. If the root helper is not
+# required, set this to False for a performance improvement. (boolean value)
+#use_helper_for_ns_read = true
+
+# Root helper daemon application to use when possible. For the agent which
+# needs to execute commands in Dom0 in the hypervisor of XenServer, this item
+# should be set to 'xenapi_root_helper', so that it will keep a XenAPI session
+# to pass commands to Dom0. (string value)
+#root_helper_daemon = <None>
+
+# Seconds between nodes reporting state to server; should be less than
+# agent_down_time, best if it is half or less than agent_down_time. (floating
+# point value)
+#report_interval = 30
+report_interval = 10
+
+# Log agent heartbeats (boolean value)
+#log_agent_heartbeats = false
+
+# Add comments to iptables rules. Set to false to disallow the addition of
+# comments to generated iptables rules that describe each rule's purpose.
+# System must support the iptables comments module for addition of comments.
+# (boolean value)
+#comment_iptables_rules = true
+
+# Duplicate every iptables difference calculation to ensure the format being
+# generated matches the format of iptables-save. This option should not be
+# turned on for production systems because it imposes a performance penalty.
+# (boolean value)
+#debug_iptables_rules = false
+
+# Action to be executed when a child process dies (string value)
+# Allowed values: respawn, exit
+#check_child_processes_action = respawn
+
+# Interval between checks of child process liveness (seconds), use 0 to disable
+# (integer value)
+#check_child_processes_interval = 60
+
+# Availability zone of this node (string value)
+#availability_zone = nova
+availability_zone = {{ neutron.availability_zone|default('nova') }}
+
+
+[cors]
+
+#
+# From oslo.middleware.cors
+#
+
+# Indicate whether this resource may be shared with the domain received in the
+# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
+# slash. Example: https://horizon.example.com (list value)
+#allowed_origin = <None>
+
+# Indicate that the actual request can include user credentials (boolean value)
+#allow_credentials = true
+
+# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
+# Headers. (list value)
+#expose_headers = X-Auth-Token,X-Subject-Token,X-Service-Token,X-OpenStack-Request-ID,OpenStack-Volume-microversion
+
+# Maximum cache age of CORS preflight requests. (integer value)
+#max_age = 3600
+
+# Indicate which methods can be used during the actual request. (list value)
+#allow_methods = GET,PUT,POST,DELETE,PATCH
+
+# Indicate which header field names may be used during the actual request.
+# (list value)
+#allow_headers = X-Auth-Token,X-Identity-Status,X-Roles,X-Service-Catalog,X-User-Id,X-Tenant-Id,X-OpenStack-Request-ID
+
+
+[cors.subdomain]
+
+#
+# From oslo.middleware.cors
+#
+
+# Indicate whether this resource may be shared with the domain received in the
+# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
+# slash. Example: https://horizon.example.com (list value)
+#allowed_origin = <None>
+
+# Indicate that the actual request can include user credentials (boolean value)
+#allow_credentials = true
+
+# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
+# Headers. (list value)
+#expose_headers = X-Auth-Token,X-Subject-Token,X-Service-Token,X-OpenStack-Request-ID,OpenStack-Volume-microversion
+
+# Maximum cache age of CORS preflight requests. (integer value)
+#max_age = 3600
+
+# Indicate which methods can be used during the actual request. (list value)
+#allow_methods = GET,PUT,POST,DELETE,PATCH
+
+# Indicate which header field names may be used during the actual request.
+# (list value)
+#allow_headers = X-Auth-Token,X-Identity-Status,X-Roles,X-Service-Catalog,X-User-Id,X-Tenant-Id,X-OpenStack-Request-ID
+
+
+[database]
+
+#
+# From neutron.db
+#
+
+# Database engine for which script will be generated when using offline
+# migration. (string value)
+#engine =
+
+#
+# From oslo.db
+#
+
+# DEPRECATED: The file name to use with SQLite. (string value)
+# Deprecated group/name - [DEFAULT]/sqlite_db
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Should use config option connection or slave_connection to connect
+# the database.
+#sqlite_db = oslo.sqlite
+
+# If True, SQLite uses synchronous mode. (boolean value)
+# Deprecated group/name - [DEFAULT]/sqlite_synchronous
+#sqlite_synchronous = true
+
+# The back end to use for the database. (string value)
+# Deprecated group/name - [DEFAULT]/db_backend
+#backend = sqlalchemy
+
+# The SQLAlchemy connection string to use to connect to the database. (string
+# value)
+# Deprecated group/name - [DEFAULT]/sql_connection
+# Deprecated group/name - [DATABASE]/sql_connection
+# Deprecated group/name - [sql]/connection
+connection = sqlite:////var/lib/neutron/neutron.sqlite
+
+# The SQLAlchemy connection string to use to connect to the slave database.
+# (string value)
+#slave_connection = <None>
+
+# The SQL mode to be used for MySQL sessions. This option, including the
+# default, overrides any server-set SQL mode. To use whatever SQL mode is set
+# by the server configuration, set this to no value. Example: mysql_sql_mode=
+# (string value)
+#mysql_sql_mode = TRADITIONAL
+
+# Timeout before idle SQL connections are reaped. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_idle_timeout
+# Deprecated group/name - [DATABASE]/sql_idle_timeout
+# Deprecated group/name - [sql]/idle_timeout
+#idle_timeout = 3600
+
+# Minimum number of SQL connections to keep open in a pool. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_min_pool_size
+# Deprecated group/name - [DATABASE]/sql_min_pool_size
+#min_pool_size = 1
+
+# Maximum number of SQL connections to keep open in a pool. Setting a value of
+# 0 indicates no limit. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_max_pool_size
+# Deprecated group/name - [DATABASE]/sql_max_pool_size
+#max_pool_size = 5
+
+# Maximum number of database connection retries during startup. Set to -1 to
+# specify an infinite retry count. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_max_retries
+# Deprecated group/name - [DATABASE]/sql_max_retries
+#max_retries = 10
+
+# Interval between retries of opening a SQL connection. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_retry_interval
+# Deprecated group/name - [DATABASE]/reconnect_interval
+#retry_interval = 10
+
+# If set, use this value for max_overflow with SQLAlchemy. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_max_overflow
+# Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
+#max_overflow = 50
+
+# Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
+# value)
+# Minimum value: 0
+# Maximum value: 100
+# Deprecated group/name - [DEFAULT]/sql_connection_debug
+#connection_debug = 0
+
+# Add Python stack traces to SQL as comment strings. (boolean value)
+# Deprecated group/name - [DEFAULT]/sql_connection_trace
+#connection_trace = false
+
+# If set, use this value for pool_timeout with SQLAlchemy. (integer value)
+# Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
+#pool_timeout = <None>
+
+# Enable the experimental use of database reconnect on connection lost.
+# (boolean value)
+#use_db_reconnect = false
+
+# Seconds between retries of a database transaction. (integer value)
+#db_retry_interval = 1
+
+# If True, increases the interval between retries of a database operation up to
+# db_max_retry_interval. (boolean value)
+#db_inc_retry_interval = true
+
+# If db_inc_retry_interval is set, the maximum seconds between retries of a
+# database operation. (integer value)
+#db_max_retry_interval = 10
+
+# Maximum retries in case of connection error or deadlock error before error is
+# raised. Set to -1 to specify an infinite retry count. (integer value)
+#db_max_retries = 20
+
+
+[keystone_authtoken]
+
+#
+# From keystonemiddleware.auth_token
+#
+
+# Complete "public" Identity API endpoint. This endpoint should not be an
+# "admin" endpoint, as it should be accessible by all end users.
+# Unauthenticated clients are redirected to this endpoint to authenticate.
+# Although this endpoint should ideally be unversioned, client support in the
+# wild varies. If you're using a versioned v2 endpoint here, then this should
+# *not* be the same endpoint the service user utilizes for validating tokens,
+# because normal end users may not be able to reach that endpoint. (string
+# value)
+#auth_uri = <None>
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+# Do not handle authorization requests within the middleware, but delegate the
+# authorization decision to downstream WSGI components. (boolean value)
+#delay_auth_decision = false
+
+# Request timeout value for communicating with Identity API server. (integer
+# value)
+#http_connect_timeout = <None>
+
+# How many times are we trying to reconnect when communicating with Identity
+# API Server. (integer value)
+#http_request_max_retries = 3
+
+# Request environment key where the Swift cache object is stored. When
+# auth_token middleware is deployed with a Swift cache, use this option to have
+# the middleware share a caching backend with swift. Otherwise, use the
+# ``memcached_servers`` option instead. (string value)
+#cache = <None>
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# The region in which the identity server can be found. (string value)
+#region_name = <None>
+
+# DEPRECATED: Directory used to cache files related to PKI tokens. This option
+# has been deprecated in the Ocata release and will be removed in the P
+# release. (string value)
+# This option is deprecated for removal since Ocata.
+# Its value may be silently ignored in the future.
+# Reason: PKI token format is no longer supported.
+#signing_dir = <None>
+
+# Optionally specify a list of memcached server(s) to use for caching. If left
+# undefined, tokens will instead be cached in-process. (list value)
+# Deprecated group/name - [keystone_authtoken]/memcache_servers
+#memcached_servers = <None>
+
+# In order to prevent excessive effort spent validating tokens, the middleware
+# caches previously-seen tokens for a configurable duration (in seconds). Set
+# to -1 to disable caching completely. (integer value)
+#token_cache_time = 300
+
+# DEPRECATED: Determines the frequency at which the list of revoked tokens is
+# retrieved from the Identity service (in seconds). A high number of revocation
+# events combined with a low cache duration may significantly reduce
+# performance. Only valid for PKI tokens. This option has been deprecated in
+# the Ocata release and will be removed in the P release. (integer value)
+# This option is deprecated for removal since Ocata.
+# Its value may be silently ignored in the future.
+# Reason: PKI token format is no longer supported.
+#revocation_cache_time = 10
+
+# (Optional) If defined, indicate whether token data should be authenticated or
+# authenticated and encrypted. If MAC, token data is authenticated (with HMAC)
+# in the cache. If ENCRYPT, token data is encrypted and authenticated in the
+# cache. If the value is not one of these options or empty, auth_token will
+# raise an exception on initialization. (string value)
+# Allowed values: None, MAC, ENCRYPT
+#memcache_security_strategy = None
+
+# (Optional, mandatory if memcache_security_strategy is defined) This string is
+# used for key derivation. (string value)
+#memcache_secret_key = <None>
+
+# (Optional) Number of seconds memcached server is considered dead before it is
+# tried again. (integer value)
+#memcache_pool_dead_retry = 300
+
+# (Optional) Maximum total number of open connections to every memcached
+# server. (integer value)
+#memcache_pool_maxsize = 10
+
+# (Optional) Socket timeout in seconds for communicating with a memcached
+# server. (integer value)
+#memcache_pool_socket_timeout = 3
+
+# (Optional) Number of seconds a connection to memcached is held unused in the
+# pool before it is closed. (integer value)
+#memcache_pool_unused_timeout = 60
+
+# (Optional) Number of seconds that an operation will wait to get a memcached
+# client connection from the pool. (integer value)
+#memcache_pool_conn_get_timeout = 10
+
+# (Optional) Use the advanced (eventlet safe) memcached client pool. The
+# advanced pool will only work under python 2.x. (boolean value)
+#memcache_use_advanced_pool = false
+
+# (Optional) Indicate whether to set the X-Service-Catalog header. If False,
+# middleware will not ask for service catalog on token validation and will not
+# set the X-Service-Catalog header. (boolean value)
+#include_service_catalog = true
+
+# Used to control the use and type of token binding. Can be set to: "disabled"
+# to not check token binding. "permissive" (default) to validate binding
+# information if the bind type is of a form known to the server and ignore it
+# if not. "strict" like "permissive" but if the bind type is unknown the token
+# will be rejected. "required" any form of token binding is needed to be
+# allowed. Finally the name of a binding method that must be present in tokens.
+# (string value)
+#enforce_token_bind = permissive
+
+# DEPRECATED: If true, the revocation list will be checked for cached tokens.
+# This requires that PKI tokens are configured on the identity server. (boolean
+# value)
+# This option is deprecated for removal since Ocata.
+# Its value may be silently ignored in the future.
+# Reason: PKI token format is no longer supported.
+#check_revocations_for_cached = false
+
+# DEPRECATED: Hash algorithms to use for hashing PKI tokens. This may be a
+# single algorithm or multiple. The algorithms are those supported by Python
+# standard hashlib.new(). The hashes will be tried in the order given, so put
+# the preferred one first for performance. The result of the first hash will be
+# stored in the cache. This will typically be set to multiple values only while
+# migrating from a less secure algorithm to a more secure one. Once all the old
+# tokens are expired this option should be set to a single value for better
+# performance. (list value)
+# This option is deprecated for removal since Ocata.
+# Its value may be silently ignored in the future.
+# Reason: PKI token format is no longer supported.
+#hash_algorithms = md5
+
+# A choice of roles that must be present in a service token. Service tokens are
+# allowed to request that an expired token can be used and so this check should
+# tightly control that only actual services should be sending this token. Roles
+# here are applied as an ANY check so any role in this list must be present.
+# For backwards compatibility reasons this currently only affects the
+# allow_expired check. (list value)
+#service_token_roles = service
+
+# For backwards compatibility reasons we must let valid service tokens pass
+# that don't pass the service_token_roles check as valid. Setting this true
+# will become the default in a future release and should be enabled if
+# possible. (boolean value)
+#service_token_roles_required = false
+
+# Prefix to prepend at the beginning of the path. Deprecated, use identity_uri.
+# (string value)
+#auth_admin_prefix =
+
+# Host providing the admin Identity API endpoint. Deprecated, use identity_uri.
+# (string value)
+#auth_host = 127.0.0.1
+
+# Port of the admin Identity API endpoint. Deprecated, use identity_uri.
+# (integer value)
+#auth_port = 35357
+
+# Protocol of the admin Identity API endpoint. Deprecated, use identity_uri.
+# (string value)
+# Allowed values: http, https
+#auth_protocol = https
+
+# Complete admin Identity API endpoint. This should specify the unversioned
+# root endpoint e.g. https://localhost:35357/ (string value)
+#identity_uri = <None>
+
+# This option is deprecated and may be removed in a future release. Single
+# shared secret with the Keystone configuration used for bootstrapping a
+# Keystone installation, or otherwise bypassing the normal authentication
+# process. This option should not be used, use `admin_user` and
+# `admin_password` instead. (string value)
+#admin_token = <None>
+
+# Service username. (string value)
+#admin_user = <None>
+
+# Service user password. (string value)
+#admin_password = <None>
+
+# Service tenant name. (string value)
+#admin_tenant_name = admin
+
+# Authentication type to load (string value)
+# Deprecated group/name - [keystone_authtoken]/auth_plugin
+#auth_type = <None>
+
+# Config Section from which to load plugin specific options (string value)
+#auth_section = <None>
+
+
+[matchmaker_redis]
+
+#
+# From oslo.messaging
+#
+
+# DEPRECATED: Host to locate redis. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#host = 127.0.0.1
+
+# DEPRECATED: Use this port to connect to redis host. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#port = 6379
+
+# DEPRECATED: Password for Redis server (optional). (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#password =
+
+# DEPRECATED: List of Redis Sentinel hosts (fault tolerance mode), e.g.,
+# [host:port, host1:port ... ] (list value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#sentinel_hosts =
+
+# Redis replica set name. (string value)
+#sentinel_group_name = oslo-messaging-zeromq
+
+# Time in ms to wait between connection attempts. (integer value)
+#wait_timeout = 2000
+
+# Time in ms to wait before the transaction is killed. (integer value)
+#check_timeout = 20000
+
+# Timeout in ms on blocking socket operations. (integer value)
+#socket_timeout = 10000
+
+
+[nova]
+
+#
+# From neutron
+#
+
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+
+# Type of the nova endpoint to use. This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Allowed values: public, admin, internal
+#endpoint_type = public
+
+#
+# From nova.auth
+#
+
+# Authentication URL (string value)
+#auth_url = <None>
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+
+# PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# (string value)
+#cafile = <None>
+
+# PEM encoded client certificate cert file (string value)
+#certfile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used
+# for both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# PEM encoded client certificate key file (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+# Deprecated group/name - [nova]/tenant-id
+#project_id = <None>
+
+# Project name to scope to (string value)
+# Deprecated group/name - [nova]/tenant-name
+#project_name = <None>
+
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
+# User id (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [nova]/user-name
+#username = <None>
+
+
+[oslo_concurrency]
+
+#
+# From oslo.concurrency
+#
+
+# Enables or disables inter-process locks. (boolean value)
+# Deprecated group/name - [DEFAULT]/disable_process_locking
+#disable_process_locking = false
+
+# Directory to use for lock files. For security, the specified directory
+# should only be writable by the user running the processes that need locking.
+# Defaults to environment variable OSLO_LOCK_PATH. If OSLO_LOCK_PATH is not set
+# in the environment, use the Python tempfile.gettempdir function to find a
+# suitable location. If external locks are used, a lock path must be set.
+# (string value)
+# Deprecated group/name - [DEFAULT]/lock_path
+#lock_path = /tmp
+lock_path = $state_path/lock
+
+
+[oslo_messaging_amqp]
+
+#
+# From oslo.messaging
+#
+
+# Name for the AMQP container. must be globally unique. Defaults to a generated
+# UUID (string value)
+# Deprecated group/name - [amqp1]/container_name
+#container_name = <None>
+
+# Timeout for inactive connections (in seconds) (integer value)
+# Deprecated group/name - [amqp1]/idle_timeout
+#idle_timeout = 0
+
+# Debug: dump AMQP frames to stdout (boolean value)
+# Deprecated group/name - [amqp1]/trace
+#trace = false
+
+# CA certificate PEM file used to verify the server's certificate (string
+# value)
+# Deprecated group/name - [amqp1]/ssl_ca_file
+#ssl_ca_file =
+
+# Self-identifying certificate PEM file for client authentication (string
+# value)
+# Deprecated group/name - [amqp1]/ssl_cert_file
+#ssl_cert_file =
+
+# Private key PEM file used to sign ssl_cert_file certificate (optional)
+# (string value)
+# Deprecated group/name - [amqp1]/ssl_key_file
+#ssl_key_file =
+
+# Password for decrypting ssl_key_file (if encrypted) (string value)
+# Deprecated group/name - [amqp1]/ssl_key_password
+#ssl_key_password = <None>
+
+# DEPRECATED: Accept clients using either SSL or plain TCP (boolean value)
+# Deprecated group/name - [amqp1]/allow_insecure_clients
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Not applicable - not a SSL server
+#allow_insecure_clients = false
+
+# Space separated list of acceptable SASL mechanisms (string value)
+# Deprecated group/name - [amqp1]/sasl_mechanisms
+#sasl_mechanisms =
+
+# Path to directory that contains the SASL configuration (string value)
+# Deprecated group/name - [amqp1]/sasl_config_dir
+#sasl_config_dir =
+
+# Name of configuration file (without .conf suffix) (string value)
+# Deprecated group/name - [amqp1]/sasl_config_name
+#sasl_config_name =
+
+# User name for message broker authentication (string value)
+# Deprecated group/name - [amqp1]/username
+#username =
+
+# Password for message broker authentication (string value)
+# Deprecated group/name - [amqp1]/password
+#password =
+
+# Seconds to pause before attempting to re-connect. (integer value)
+# Minimum value: 1
+#connection_retry_interval = 1
+
+# Increase the connection_retry_interval by this many seconds after each
+# unsuccessful failover attempt. (integer value)
+# Minimum value: 0
+#connection_retry_backoff = 2
+
+# Maximum limit for connection_retry_interval + connection_retry_backoff
+# (integer value)
+# Minimum value: 1
+#connection_retry_interval_max = 30
+
+# Time to pause between re-connecting an AMQP 1.0 link that failed due to a
+# recoverable error. (integer value)
+# Minimum value: 1
+#link_retry_delay = 10
+
+# The maximum number of attempts to re-send a reply message which failed due to
+# a recoverable error. (integer value)
+# Minimum value: -1
+#default_reply_retry = 0
+
+# The deadline for an rpc reply message delivery. (integer value)
+# Minimum value: 5
+#default_reply_timeout = 30
+
+# The deadline for an rpc cast or call message delivery. Only used when caller
+# does not provide a timeout expiry. (integer value)
+# Minimum value: 5
+#default_send_timeout = 30
+
+# The deadline for a sent notification message delivery. Only used when caller
+# does not provide a timeout expiry. (integer value)
+# Minimum value: 5
+#default_notify_timeout = 30
+
+# The duration to schedule a purge of idle sender links. Detach link after
+# expiry. (integer value)
+# Minimum value: 1
+#default_sender_link_timeout = 600
+
+# Indicates the addressing mode used by the driver.
+# Permitted values:
+# 'legacy' - use legacy non-routable addressing
+# 'routable' - use routable addresses
+# 'dynamic' - use legacy addresses if the message bus does not support routing
+# otherwise use routable addressing (string value)
+#addressing_mode = dynamic
+
+# address prefix used when sending to a specific server (string value)
+# Deprecated group/name - [amqp1]/server_request_prefix
+#server_request_prefix = exclusive
+
+# address prefix used when broadcasting to all servers (string value)
+# Deprecated group/name - [amqp1]/broadcast_prefix
+#broadcast_prefix = broadcast
+
+# address prefix when sending to any server in group (string value)
+# Deprecated group/name - [amqp1]/group_request_prefix
+#group_request_prefix = unicast
+
+# Address prefix for all generated RPC addresses (string value)
+#rpc_address_prefix = openstack.org/om/rpc
+
+# Address prefix for all generated Notification addresses (string value)
+#notify_address_prefix = openstack.org/om/notify
+
+# Appended to the address prefix when sending a fanout message. Used by the
+# message bus to identify fanout messages. (string value)
+#multicast_address = multicast
+
+# Appended to the address prefix when sending to a particular RPC/Notification
+# server. Used by the message bus to identify messages sent to a single
+# destination. (string value)
+#unicast_address = unicast
+
+# Appended to the address prefix when sending to a group of consumers. Used by
+# the message bus to identify messages that should be delivered in a round-
+# robin fashion across consumers. (string value)
+#anycast_address = anycast
+
+# Exchange name used in notification addresses.
+# Exchange name resolution precedence:
+# Target.exchange if set
+# else default_notification_exchange if set
+# else control_exchange if set
+# else 'notify' (string value)
+#default_notification_exchange = <None>
+
+# Exchange name used in RPC addresses.
+# Exchange name resolution precedence:
+# Target.exchange if set
+# else default_rpc_exchange if set
+# else control_exchange if set
+# else 'rpc' (string value)
+#default_rpc_exchange = <None>
+
+# Window size for incoming RPC Reply messages. (integer value)
+# Minimum value: 1
+#reply_link_credit = 200
+
+# Window size for incoming RPC Request messages (integer value)
+# Minimum value: 1
+#rpc_server_credit = 100
+
+# Window size for incoming Notification messages (integer value)
+# Minimum value: 1
+#notify_server_credit = 100
+
+# Send messages of this type pre-settled.
+# Pre-settled messages will not receive acknowledgement
+# from the peer. Note well: pre-settled messages may be
+# silently discarded if the delivery fails.
+# Permitted values:
+# 'rpc-call' - send RPC Calls pre-settled
+# 'rpc-reply'- send RPC Replies pre-settled
+# 'rpc-cast' - Send RPC Casts pre-settled
+# 'notify' - Send Notifications pre-settled
+# (multi valued)
+#pre_settled = rpc-cast
+#pre_settled = rpc-reply
+
+
+[oslo_messaging_kafka]
+
+#
+# From oslo.messaging
+#
+
+# DEPRECATED: Default Kafka broker Host (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#kafka_default_host = localhost
+
+# DEPRECATED: Default Kafka broker Port (port value)
+# Minimum value: 0
+# Maximum value: 65535
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#kafka_default_port = 9092
+
+# Max fetch bytes of Kafka consumer (integer value)
+#kafka_max_fetch_bytes = 1048576
+
+# Default timeout(s) for Kafka consumers (integer value)
+#kafka_consumer_timeout = 1.0
+
+# Pool Size for Kafka Consumers (integer value)
+#pool_size = 10
+
+# The pool size limit for connections expiration policy (integer value)
+#conn_pool_min_size = 2
+
+# The time-to-live in sec of idle connections in the pool (integer value)
+#conn_pool_ttl = 1200
+
+# Group id for Kafka consumer. Consumers in one group will coordinate message
+# consumption (string value)
+#consumer_group = oslo_messaging_consumer
+
+# Upper bound on the delay for KafkaProducer batching in seconds (floating
+# point value)
+#producer_batch_timeout = 0.0
+
+# Size of batch for the producer async send (integer value)
+#producer_batch_size = 16384
+
+
+[oslo_messaging_notifications]
+
+#
+# From oslo.messaging
+#
+
+# The Drivers(s) to handle sending notifications. Possible values are
+# messaging, messagingv2, routing, log, test, noop (multi valued)
+# Deprecated group/name - [DEFAULT]/notification_driver
+#driver =
+{%- if neutron.notification is mapping %}
+driver = {{ neutron.notification.get('driver', 'messagingv2') }}
+{%- if neutron.notification.topics is defined %}
+topics = {{ neutron.notification.topics }}
+{%- endif %}
+{%- elif neutron.get('notification', False) %}
+driver = messagingv2
+{%- endif %}
+# A URL representing the messaging driver to use for notifications. If not set,
+# we fall back to the same configuration used for RPC. (string value)
+# Deprecated group/name - [DEFAULT]/notification_transport_url
+#transport_url = <None>
+
+# AMQP topic used for OpenStack notifications. (list value)
+# Deprecated group/name - [rpc_notifier2]/topics
+# Deprecated group/name - [DEFAULT]/notification_topics
+#topics = notifications
+
+
+[oslo_messaging_rabbit]
+
+#
+# From oslo.messaging
+#
+
+# Use durable queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/amqp_durable_queues
+# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
+#amqp_durable_queues = false
+
+# Auto-delete queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/amqp_auto_delete
+#amqp_auto_delete = false
+
+# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
+# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
+# distributions. (string value)
+# Deprecated group/name - [DEFAULT]/kombu_ssl_version
+#kombu_ssl_version =
+
+# SSL key file (valid only if SSL enabled). (string value)
+# Deprecated group/name - [DEFAULT]/kombu_ssl_keyfile
+#kombu_ssl_keyfile =
+
+# SSL cert file (valid only if SSL enabled). (string value)
+# Deprecated group/name - [DEFAULT]/kombu_ssl_certfile
+#kombu_ssl_certfile =
+
+# SSL certification authority file (valid only if SSL enabled). (string value)
+# Deprecated group/name - [DEFAULT]/kombu_ssl_ca_certs
+#kombu_ssl_ca_certs =
+
+# How long to wait before reconnecting in response to an AMQP consumer cancel
+# notification. (floating point value)
+# Deprecated group/name - [DEFAULT]/kombu_reconnect_delay
+#kombu_reconnect_delay = 1.0
+
+# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not
+# be used. This option may not be available in future versions. (string value)
+#kombu_compression = <None>
+
+# How long to wait a missing client before abandoning to send it its replies.
+# This value should not be longer than rpc_response_timeout. (integer value)
+# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
+#kombu_missing_consumer_retry_timeout = 60
+
+# Determines how the next RabbitMQ node is chosen in case the one we are
+# currently connected to becomes unavailable. Takes effect only if more than
+# one RabbitMQ node is provided in config. (string value)
+# Allowed values: round-robin, shuffle
+#kombu_failover_strategy = round-robin
+
+# DEPRECATED: The RabbitMQ broker address where a single node is used. (string
+# value)
+# Deprecated group/name - [DEFAULT]/rabbit_host
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_host = localhost
+
+# DEPRECATED: The RabbitMQ broker port where a single node is used. (port
+# value)
+# Minimum value: 0
+# Maximum value: 65535
+# Deprecated group/name - [DEFAULT]/rabbit_port
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_port = 5672
+
+# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
+# Deprecated group/name - [DEFAULT]/rabbit_hosts
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_hosts = $rabbit_host:$rabbit_port
+
+# Connect over SSL for RabbitMQ. (boolean value)
+# Deprecated group/name - [DEFAULT]/rabbit_use_ssl
+#rabbit_use_ssl = false
+
+# DEPRECATED: The RabbitMQ userid. (string value)
+# Deprecated group/name - [DEFAULT]/rabbit_userid
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_userid = guest
+
+# DEPRECATED: The RabbitMQ password. (string value)
+# Deprecated group/name - [DEFAULT]/rabbit_password
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_password = guest
+
+# The RabbitMQ login method. (string value)
+# Allowed values: PLAIN, AMQPLAIN, RABBIT-CR-DEMO
+# Deprecated group/name - [DEFAULT]/rabbit_login_method
+#rabbit_login_method = AMQPLAIN
+
+# DEPRECATED: The RabbitMQ virtual host. (string value)
+# Deprecated group/name - [DEFAULT]/rabbit_virtual_host
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_virtual_host = /
+
+# How frequently to retry connecting with RabbitMQ. (integer value)
+#rabbit_retry_interval = 1
+rabbit_retry_interval = 1
+
+# How long to backoff for between retries when connecting to RabbitMQ. (integer
+# value)
+# Deprecated group/name - [DEFAULT]/rabbit_retry_backoff
+#rabbit_retry_backoff = 2
+rabbit_retry_backoff = 2
+
+# Maximum interval of RabbitMQ connection retries. Default is 30 seconds.
+# (integer value)
+#rabbit_interval_max = 30
+
+# DEPRECATED: Maximum number of RabbitMQ connection retries. Default is 0
+# (infinite retry count). (integer value)
+# Deprecated group/name - [DEFAULT]/rabbit_max_retries
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#rabbit_max_retries = 0
+rabbit_max_retries = 0
+
+# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this
+# option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring
+# is no longer controlled by the x-ha-policy argument when declaring a queue.
+# If you just want to make sure that all queues (except those with auto-
+# generated names) are mirrored across all nodes, run: "rabbitmqctl set_policy
+# HA '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value)
+# Deprecated group/name - [DEFAULT]/rabbit_ha_queues
+#rabbit_ha_queues = false
+
+# Positive integer representing duration in seconds for queue TTL (x-expires).
+# Queues which are unused for the duration of the TTL are automatically
+# deleted. The parameter affects only reply and fanout queues. (integer value)
+# Minimum value: 1
+#rabbit_transient_queues_ttl = 1800
+
+# Specifies the number of messages to prefetch. Setting to zero allows
+# unlimited messages. (integer value)
+#rabbit_qos_prefetch_count = 0
+
+# Number of seconds after which the Rabbit broker is considered down if
+# heartbeat's keep-alive fails (0 disable the heartbeat). EXPERIMENTAL (integer
+# value)
+#heartbeat_timeout_threshold = 60
+heartbeat_timeout_threshold = 0
+
+# How often times during the heartbeat_timeout_threshold we check the
+# heartbeat. (integer value)
+#heartbeat_rate = 2
+heartbeat_rate = 2
+
+# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake (boolean value)
+# Deprecated group/name - [DEFAULT]/fake_rabbit
+#fake_rabbit = false
+
+# Maximum number of channels to allow (integer value)
+#channel_max = <None>
+
+# The maximum byte size for an AMQP frame (integer value)
+#frame_max = <None>
+
+# How often to send heartbeats for consumer's connections (integer value)
+#heartbeat_interval = 3
+
+# Enable SSL (boolean value)
+#ssl = <None>
+
+# Arguments passed to ssl.wrap_socket (dict value)
+#ssl_options = <None>
+
+# Set socket timeout in seconds for connection's socket (floating point value)
+#socket_timeout = 0.25
+
+# Set TCP_USER_TIMEOUT in seconds for connection's socket (floating point
+# value)
+#tcp_user_timeout = 0.25
+
+# Set delay for reconnection to some host which has connection error (floating
+# point value)
+#host_connection_reconnect_delay = 0.25
+
+# Connection factory implementation (string value)
+# Allowed values: new, single, read_write
+#connection_factory = single
+
+# Maximum number of connections to keep queued. (integer value)
+#pool_max_size = 30
+
+# Maximum number of connections to create above `pool_max_size`. (integer
+# value)
+#pool_max_overflow = 0
+
+# Default number of seconds to wait for a connections to available (integer
+# value)
+#pool_timeout = 30
+
+# Lifetime of a connection (since creation) in seconds or None for no
+# recycling. Expired connections are closed on acquire. (integer value)
+#pool_recycle = 600
+
+# Threshold at which inactive (since release) connections are considered stale
+# in seconds or None for no staleness. Stale connections are closed on acquire.
+# (integer value)
+#pool_stale = 60
+
+# Default serialization mechanism for serializing/deserializing
+# outgoing/incoming messages (string value)
+# Allowed values: json, msgpack
+#default_serializer_type = json
+
+# Persist notification messages. (boolean value)
+#notification_persistence = false
+
+# Exchange name for sending notifications (string value)
+#default_notification_exchange = ${control_exchange}_notification
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# notification listener. (integer value)
+#notification_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during sending
+# notification, -1 means infinite retry. (integer value)
+#default_notification_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during sending
+# notification message (floating point value)
+#notification_retry_delay = 0.25
+
+# Time to live for rpc queues without consumers in seconds. (integer value)
+#rpc_queue_expiration = 60
+
+# Exchange name for sending RPC messages (string value)
+#default_rpc_exchange = ${control_exchange}_rpc
+
+# Exchange name for receiving RPC replies (string value)
+#rpc_reply_exchange = ${control_exchange}_rpc_reply
+
+# Max number of not acknowledged message which RabbitMQ can send to rpc
+# listener. (integer value)
+#rpc_listener_prefetch_count = 100
+
+# Max number of not acknowledged message which RabbitMQ can send to rpc reply
+# listener. (integer value)
+#rpc_reply_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during sending
+# reply. -1 means infinite retry during rpc_timeout (integer value)
+#rpc_reply_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during sending
+# reply. (floating point value)
+#rpc_reply_retry_delay = 0.25
+
+# Reconnecting retry count in case of connectivity problem during sending RPC
+# message, -1 means infinite retry. If actual retry attempts in not 0 the rpc
+# request could be processed more than one time (integer value)
+#default_rpc_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during sending RPC
+# message (floating point value)
+#rpc_retry_delay = 0.25
+
+
+[oslo_messaging_zmq]
+
+#
+# From oslo.messaging
+#
+
+# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
+# The "host" option should point or resolve to this address. (string value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_bind_address
+#rpc_zmq_bind_address = *
+
+# MatchMaker driver. (string value)
+# Allowed values: redis, sentinel, dummy
+# Deprecated group/name - [DEFAULT]/rpc_zmq_matchmaker
+#rpc_zmq_matchmaker = redis
+
+# Number of ZeroMQ contexts, defaults to 1. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_contexts
+#rpc_zmq_contexts = 1
+
+# Maximum number of ingress messages to locally buffer per topic. Default is
+# unlimited. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_topic_backlog
+#rpc_zmq_topic_backlog = <None>
+
+# Directory for holding IPC sockets. (string value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_ipc_dir
+#rpc_zmq_ipc_dir = /var/run/openstack
+
+# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
+# "host" option, if running Nova. (string value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_host
+#rpc_zmq_host = localhost
+
+# Number of seconds to wait before all pending messages will be sent after
+# closing a socket. The default value of -1 specifies an infinite linger
+# period. The value of 0 specifies no linger period. Pending messages shall be
+# discarded immediately when the socket is closed. Positive values specify an
+# upper bound for the linger period. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
+#zmq_linger = -1
+
+# The default number of seconds that poll should wait. Poll raises timeout
+# exception when timeout expired. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_poll_timeout
+#rpc_poll_timeout = 1
+
+# Expiration timeout in seconds of a name service record about existing target
+# ( < 0 means no timeout). (integer value)
+# Deprecated group/name - [DEFAULT]/zmq_target_expire
+#zmq_target_expire = 300
+
+# Update period in seconds of a name service record about existing target.
+# (integer value)
+# Deprecated group/name - [DEFAULT]/zmq_target_update
+#zmq_target_update = 180
+
+# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
+# value)
+# Deprecated group/name - [DEFAULT]/use_pub_sub
+#use_pub_sub = false
+
+# Use ROUTER remote proxy. (boolean value)
+# Deprecated group/name - [DEFAULT]/use_router_proxy
+#use_router_proxy = false
+
+# This option makes direct connections dynamic or static. It makes sense only
+# with use_router_proxy=False which means to use direct connections for direct
+# message types (ignored otherwise). (boolean value)
+#use_dynamic_connections = false
+
+# How many additional connections to a host will be made for failover reasons.
+# This option is actual only in dynamic connections mode. (integer value)
+#zmq_failover_connections = 2
+
+# Minimal port number for random ports range. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+# Deprecated group/name - [DEFAULT]/rpc_zmq_min_port
+#rpc_zmq_min_port = 49153
+
+# Maximal port number for random ports range. (integer value)
+# Minimum value: 1
+# Maximum value: 65536
+# Deprecated group/name - [DEFAULT]/rpc_zmq_max_port
+#rpc_zmq_max_port = 65536
+
+# Number of retries to find free port number before fail with ZMQBindError.
+# (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_bind_port_retries
+#rpc_zmq_bind_port_retries = 100
+
+# Default serialization mechanism for serializing/deserializing
+# outgoing/incoming messages (string value)
+# Allowed values: json, msgpack
+# Deprecated group/name - [DEFAULT]/rpc_zmq_serialization
+#rpc_zmq_serialization = json
+
+# This option configures round-robin mode in zmq socket. True means not keeping
+# a queue when server side disconnects. False means to keep queue and messages
+# even if server is disconnected, when the server appears we send all
+# accumulated messages to it. (boolean value)
+#zmq_immediate = true
+
+# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
+# other negative value) means to skip any overrides and leave it to OS default;
+# 0 and 1 (or any other positive value) mean to disable and enable the option
+# respectively. (integer value)
+#zmq_tcp_keepalive = -1
+
+# The duration between two keepalive transmissions in idle condition. The unit
+# is platform dependent, for example, seconds in Linux, milliseconds in Windows
+# etc. The default value of -1 (or any other negative value and 0) means to
+# skip any overrides and leave it to OS default. (integer value)
+#zmq_tcp_keepalive_idle = -1
+
+# The number of retransmissions to be carried out before declaring that remote
+# end is not available. The default value of -1 (or any other negative value
+# and 0) means to skip any overrides and leave it to OS default. (integer
+# value)
+#zmq_tcp_keepalive_cnt = -1
+
+# The duration between two successive keepalive retransmissions, if
+# acknowledgement to the previous keepalive transmission is not received. The
+# unit is platform dependent, for example, seconds in Linux, milliseconds in
+# Windows etc. The default value of -1 (or any other negative value and 0)
+# means to skip any overrides and leave it to OS default. (integer value)
+#zmq_tcp_keepalive_intvl = -1
+
+# Maximum number of (green) threads to work concurrently. (integer value)
+#rpc_thread_pool_size = 100
+
+# Expiration timeout in seconds of a sent/received message after which it is
+# not tracked anymore by a client/server. (integer value)
+#rpc_message_ttl = 300
+
+# Wait for message acknowledgements from receivers. This mechanism works only
+# via proxy without PUB/SUB. (boolean value)
+#rpc_use_acks = false
+
+# Number of seconds to wait for an ack from a cast/call. After each retry
+# attempt this timeout is multiplied by some specified multiplier. (integer
+# value)
+#rpc_ack_timeout_base = 15
+
+# Number to multiply base ack timeout by after each retry attempt. (integer
+# value)
+#rpc_ack_timeout_multiplier = 2
+
+# Default number of message sending attempts in case of any problems occurred:
+# positive value N means at most N retries, 0 means no retries, None or -1 (or
+# any other negative values) mean to retry forever. This option is used only if
+# acknowledgments are enabled. (integer value)
+#rpc_retry_attempts = 3
+
+# List of publisher hosts SubConsumer can subscribe on. This option has higher
+# priority then the default publishers list taken from the matchmaker. (list
+# value)
+#subscribe_on =
+
+
+[oslo_middleware]
+
+#
+# From oslo.middleware.http_proxy_to_wsgi
+#
+
+# Whether the application is behind a proxy or not. This determines if the
+# middleware should parse the headers or not. (boolean value)
+#enable_proxy_headers_parsing = false
+
+
+[oslo_policy]
+
+#
+# From oslo.policy
+#
+
+# The file that defines policies. (string value)
+# Deprecated group/name - [DEFAULT]/policy_file
+#policy_file = policy.json
+
+# Default rule. Enforced when a requested rule is not found. (string value)
+# Deprecated group/name - [DEFAULT]/policy_default_rule
+#policy_default_rule = default
+
+# Directories where policy configuration files are stored. They can be relative
+# to any directory in the search path defined by the config_dir option, or
+# absolute paths. The file defined by policy_file must exist for these
+# directories to be searched. Missing or empty directories are ignored. (multi
+# valued)
+# Deprecated group/name - [DEFAULT]/policy_dirs
+#policy_dirs = policy.d
+
+
+[qos]
+
+#
+# From neutron.qos
+#
+
+# DEPRECATED: Drivers list to use to send the update notification. This option
+# will be unused in Pike. (list value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#notification_drivers = message_queue
+
+
+[quotas]
+
+#
+# From neutron
+#
+
+# Default number of resource allowed per tenant. A negative value means
+# unlimited. (integer value)
+#default_quota = -1
+
+# Number of networks allowed per tenant. A negative value means unlimited.
+# (integer value)
+#quota_network = 10
+
+# Number of subnets allowed per tenant, A negative value means unlimited.
+# (integer value)
+#quota_subnet = 10
+
+# Number of ports allowed per tenant. A negative value means unlimited.
+# (integer value)
+#quota_port = 50
+
+# Default driver to use for quota checks. (string value)
+#quota_driver = neutron.db.quota.driver.DbQuotaDriver
+
+# Keep in track in the database of current resource quota usage. Plugins which
+# do not leverage the neutron database should set this flag to False. (boolean
+# value)
+#track_quota_usage = true
+
+#
+# From neutron.extensions
+#
+
+# Number of routers allowed per tenant. A negative value means unlimited.
+# (integer value)
+#quota_router = 10
+
+# Number of floating IPs allowed per tenant. A negative value means unlimited.
+# (integer value)
+#quota_floatingip = 50
+
+# Number of security groups allowed per tenant. A negative value means
+# unlimited. (integer value)
+#quota_security_group = 10
+
+# Number of security rules allowed per tenant. A negative value means
+# unlimited. (integer value)
+#quota_security_group_rule = 100
+
+
+[ssl]
+
+#
+# From oslo.service.sslutils
+#
+
+# CA certificate file to use to verify connecting clients. (string value)
+# Deprecated group/name - [DEFAULT]/ssl_ca_file
+#ca_file = <None>
+
+# Certificate file to use when starting the server securely. (string value)
+# Deprecated group/name - [DEFAULT]/ssl_cert_file
+#cert_file = <None>
+
+# Private key file to use when starting the server securely. (string value)
+# Deprecated group/name - [DEFAULT]/ssl_key_file
+#key_file = <None>
+
+# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
+# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
+# distributions. (string value)
+#version = <None>
+
+# Sets the list of available ciphers. value should be a string in the OpenSSL
+# cipher list format. (string value)
+#ciphers = <None>
diff --git a/neutron/files/ocata/neutron-server b/neutron/files/ocata/neutron-server
new file mode 100644
index 0000000..54f6ceb
--- /dev/null
+++ b/neutron/files/ocata/neutron-server
@@ -0,0 +1,16 @@
+# Generated by Salt.
+{%- from "neutron/map.jinja" import server with context %}
+
+# defaults for neutron-server
+
+# path to config file corresponding to the core_plugin specified in
+# neutron.conf
+#NEUTRON_PLUGIN_CONFIG="/etc/neutron/plugins/openvswitch/ovs_neutron_plugin.ini"
+
+{%- if server.backend.engine == "ml2" %}
+NEUTRON_PLUGIN_CONFIG="/etc/neutron/plugins/ml2/ml2_conf.ini"
+{%- endif %}
+
+{%- if server.backend.engine == "contrail" %}
+NEUTRON_PLUGIN_CONFIG="/etc/neutron/plugins/opencontrail/ContrailPlugin.ini"
+{%- endif %}
\ No newline at end of file
diff --git a/neutron/files/ocata/neutron-server.conf.Debian b/neutron/files/ocata/neutron-server.conf.Debian
new file mode 100644
index 0000000..8bbe2a2
--- /dev/null
+++ b/neutron/files/ocata/neutron-server.conf.Debian
@@ -0,0 +1,2169 @@
+{%- from "neutron/map.jinja" import server with context %}
+[DEFAULT]
+
+#
+# From neutron
+#
+
+# Where to store Neutron state files. This directory must be writable by the
+# agent. (string value)
+#state_path = /var/lib/neutron
+state_path = /var/lib/neutron
+
+# The host IP to bind to (string value)
+#bind_host = 0.0.0.0
+bind_host = {{ server.bind.address }}
+
+# The port to bind to (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#bind_port = 9696
+bind_port = {{ server.bind.port }}
+
+# The path for API extensions. Note that this can be a colon-separated list of
+# paths. For example: api_extensions_path =
+# extensions:/path/to/more/exts:/even/more/exts. The __path__ of
+# neutron.extensions is appended to this, so if your extensions are in there
+# you don't need to specify them here. (string value)
+#api_extensions_path =
+agent_down_time = 30
+
+# The type of authentication to use (string value)
+#auth_strategy = keystone
+auth_strategy = keystone
+
+{% if server.backend.engine == "contrail" %}
+
+# TEMPORARY - until neutron v2 contrail package would be supported
+#api_extensions_path = extensions:/usr/lib/python2.7/dist-packages/neutron_plugin_contrail/extensions:/usr/lib/python2.7/dist-packages/neutron_lbaas/extensions
+api_extensions_path = extensions:/usr/lib/python2.7/dist-packages/neutron_plugin_contrail/extensions
+# The core plugin Neutron will use (string value)
+core_plugin = neutron_plugin_contrail.plugins.opencontrail.contrail_plugin.NeutronPluginContrailCoreV2
+
+# TEMPORARY - until neutron v2 contrail package would be supported
+#service_plugins = neutron_plugin_contrail.plugins.opencontrail.loadbalancer.v2.plugin.LoadBalancerPluginV2
+{% elif server.backend.engine == "ml2" %}
+
+core_plugin = neutron.plugins.ml2.plugin.Ml2Plugin
+
+service_plugins =neutron.services.l3_router.l3_router_plugin.L3RouterPlugin,neutron.services.metering.metering_plugin.MeteringPlugin{%- if server.lbaas is defined -%}
+,neutron_lbaas.services.loadbalancer.plugin.LoadBalancerPluginv2
+{%- endif -%}
+
+{% endif %}
+
+# The service plugins Neutron will use (list value)
+#service_plugins =
+{% if server.get('allow_pagination', false) %}
+allow_pagination = True
+{% else %}
+allow_pagination = False
+{% endif %}
+
+# The base MAC address Neutron will use for VIFs. The first 3 octets will
+# remain unchanged. If the 4th octet is not 00, it will also be used. The
+# others will be randomly generated. (string value)
+#base_mac = fa:16:3e:00:00:00
+
+# Allow the usage of the bulk API (boolean value)
+#allow_bulk = true
+
+# The maximum number of items returned in a single response, value was
+# 'infinite' or negative integer means no limit (string value)
+#pagination_max_limit = -1
+pagination_max_limit = {{ server.pagination_max_limit|default('-1') }}
+
+# Default value of availability zone hints. The availability zone aware
+# schedulers use this when the resources availability_zone_hints is empty.
+# Multiple availability zones can be specified by a comma separated string.
+# This value can be empty. In this case, even if availability_zone_hints for a
+# resource is empty, availability zone is considered for high availability
+# while scheduling the resource. (list value)
+#default_availability_zones =
+
+# Maximum number of DNS nameservers per subnet (integer value)
+#max_dns_nameservers = 5
+
+# Maximum number of host routes per subnet (integer value)
+#max_subnet_host_routes = 20
+
+# DEPRECATED: Maximum number of fixed ips per port. This option is deprecated
+# and will be removed in the Ocata release. (integer value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#max_fixed_ips_per_port = 5
+
+# Enables IPv6 Prefix Delegation for automatic subnet CIDR allocation. Set to
+# True to enable IPv6 Prefix Delegation for subnet allocation in a PD-capable
+# environment. Users making subnet creation requests for IPv6 subnets without
+# providing a CIDR or subnetpool ID will be given a CIDR via the Prefix
+# Delegation mechanism. Note that enabling PD will override the behavior of the
+# default IPv6 subnetpool. (boolean value)
+#ipv6_pd_enabled = false
+
+# DHCP lease duration (in seconds). Use -1 to tell dnsmasq to use infinite
+# lease times. (integer value)
+#dhcp_lease_duration = 86400
+dhcp_lease_duration = 600
+
+# Domain to use for building the hostnames (string value)
+#dns_domain = openstacklocal
+dns_domain = {{ server.dns_domain }}
+
+# Driver for external DNS integration. (string value)
+#external_dns_driver = <None>
+
+# Allow sending resource operation notification to DHCP agent (boolean value)
+#dhcp_agent_notification = true
+
+# Allow overlapping IP support in Neutron. Attention: the following parameter
+# MUST be set to False if Neutron is being used in conjunction with Nova
+# security groups. (boolean value)
+#allow_overlapping_ips = false
+allow_overlapping_ips = True
+
+# Hostname to be used by the Neutron server, agents and services running on
+# this machine. All the agents and services running on this machine must use
+# the same host value. (string value)
+#host = example.domain
+
+# Send notification to nova when port status changes (boolean value)
+#notify_nova_on_port_status_changes = true
+notify_nova_on_port_status_changes = true
+
+# Send notification to nova when port data (fixed_ips/floatingip) changes so
+# nova can update its cache. (boolean value)
+#notify_nova_on_port_data_changes = true
+notify_nova_on_port_data_changes = true
+
+# Number of seconds between sending events to nova if there are any events to
+# send. (integer value)
+#send_events_interval = 2
+
+# Neutron IPAM (IP address management) driver to use. By default, the reference
+# implementation of the Neutron IPAM driver is used. (string value)
+#ipam_driver = internal
+
+# If True, then allow plugins that support it to create VLAN transparent
+# networks. (boolean value)
+#vlan_transparent = false
+
+# This will choose the web framework in which to run the Neutron API server.
+# 'pecan' is a new experimental rewrite of the API server. (string value)
+# Allowed values: legacy, pecan
+#web_framework = legacy
+
+# MTU of the underlying physical network. Neutron uses this value to calculate
+# MTU for all virtual network components. For flat and VLAN networks, neutron
+# uses this value without modification. For overlay networks such as VXLAN,
+# neutron automatically subtracts the overlay protocol overhead from this
+# value. Defaults to 1500, the standard value for Ethernet. (integer value)
+# Deprecated group/name - [ml2]/segment_mtu
+#global_physnet_mtu = 1500
+global_physnet_mtu = {{ server.get('global_physnet_mtu', '1500') }}
+
+# Number of backlog requests to configure the socket with (integer value)
+#backlog = 4096
+
+# Number of seconds to keep retrying to listen (integer value)
+#retry_until_window = 30
+
+# Enable SSL on the API server (boolean value)
+#use_ssl = false
+
+# Seconds between running periodic tasks. (integer value)
+#periodic_interval = 40
+
+# Number of separate API worker processes for service. If not specified, the
+# default is equal to the number of CPUs available for best performance.
+# (integer value)
+#api_workers = <None>
+
+# Number of RPC worker processes for service. (integer value)
+#rpc_workers = 1
+
+# Number of RPC worker processes dedicated to state reports queue. (integer
+# value)
+#rpc_state_report_workers = 1
+
+# Range of seconds to randomly delay when starting the periodic task scheduler
+# to reduce stampeding. (Disable by setting to 0) (integer value)
+#periodic_fuzzy_delay = 5
+
+#
+# From neutron.agent
+#
+
+# The driver used to manage the virtual interface. (string value)
+#interface_driver = <None>
+
+# Location for Metadata Proxy UNIX domain socket. (string value)
+#metadata_proxy_socket = $state_path/metadata_proxy
+
+# User (uid or name) running metadata proxy after its initialization (if empty:
+# agent effective user). (string value)
+#metadata_proxy_user =
+
+# Group (gid or name) running metadata proxy after its initialization (if
+# empty: agent effective group). (string value)
+#metadata_proxy_group =
+
+# Enable/Disable log watch by metadata proxy. It should be disabled when
+# metadata_proxy_user/group is not allowed to read/write its log file and
+# copytruncate logrotate option must be used if logrotate is enabled on
+# metadata proxy log files. Option default value is deduced from
+# metadata_proxy_user: watch log is enabled if metadata_proxy_user is agent
+# effective user id/name. (boolean value)
+#metadata_proxy_watch_log = <None>
+
+#
+# From neutron.db
+#
+
+# Representing the resource type whose load is being reported by the agent.
+# This can be "networks", "subnets" or "ports". When specified (Default is
+# networks), the server will extract particular load sent as part of its agent
+# configuration object from the agent report state, which is the number of
+# resources being consumed, at every report_interval.dhcp_load_type can be used
+# in combination with network_scheduler_driver =
+# neutron.scheduler.dhcp_agent_scheduler.WeightScheduler When the
+# network_scheduler_driver is WeightScheduler, dhcp_load_type can be configured
+# to represent the choice for the resource being balanced. Example:
+# dhcp_load_type=networks (string value)
+# Allowed values: networks, subnets, ports
+#dhcp_load_type = networks
+
+# Agent starts with admin_state_up=False when enable_new_agents=False. In the
+# case, user's resources will not be scheduled automatically to the agent until
+# admin changes admin_state_up to True. (boolean value)
+#enable_new_agents = true
+
+# Maximum number of routes per router (integer value)
+#max_routes = 30
+
+# Define the default value of enable_snat if not provided in
+# external_gateway_info. (boolean value)
+#enable_snat_by_default = true
+
+# Driver to use for scheduling network to DHCP agent (string value)
+#network_scheduler_driver = neutron.scheduler.dhcp_agent_scheduler.WeightScheduler
+
+# Allow auto scheduling networks to DHCP agent. (boolean value)
+#network_auto_schedule = true
+
+# Automatically remove networks from offline DHCP agents. (boolean value)
+#allow_automatic_dhcp_failover = true
+
+# Number of DHCP agents scheduled to host a tenant network. If this number is
+# greater than 1, the scheduler automatically assigns multiple DHCP agents for
+# a given tenant network, providing high availability for DHCP service.
+# (integer value)
+#dhcp_agents_per_network = 1
+dhcp_agents_per_network = 2
+
+# Enable services on an agent with admin_state_up False. If this option is
+# False, when admin_state_up of an agent is turned False, services on it will
+# be disabled. Agents with admin_state_up False are not selected for automatic
+# scheduling regardless of this option. But manual scheduling to such agents is
+# available if this option is True. (boolean value)
+#enable_services_on_agents_with_admin_state_down = false
+
+# The base mac address used for unique DVR instances by Neutron. The first 3
+# octets will remain unchanged. If the 4th octet is not 00, it will also be
+# used. The others will be randomly generated. The 'dvr_base_mac' *must* be
+# different from 'base_mac' to avoid mixing them up with MAC's allocated for
+# tenant ports. A 4 octet example would be dvr_base_mac = fa:16:3f:4f:00:00.
+# The default is 3 octet (string value)
+#dvr_base_mac = fa:16:3f:00:00:00
+
+# System-wide flag to determine the type of router that tenants can create.
+# Only admin can override. (boolean value)
+#router_distributed = false
+router_distributed = {{ server.get('dvr', 'False') }}
+
+# Driver to use for scheduling router to a default L3 agent (string value)
+#router_scheduler_driver = neutron.scheduler.l3_agent_scheduler.LeastRoutersScheduler
+router_scheduler_driver = neutron.scheduler.l3_agent_scheduler.ChanceScheduler
+
+# Allow auto scheduling of routers to L3 agent. (boolean value)
+#router_auto_schedule = true
+
+# Automatically reschedule routers from offline L3 agents to online L3 agents.
+# (boolean value)
+#allow_automatic_l3agent_failover = false
+
+# Enable HA mode for virtual routers. (boolean value)
+#l3_ha = false
+l3_ha = {{ server.get('l3_ha', 'False') }}
+
+# Maximum number of L3 agents which a HA router will be scheduled on. If it is
+# set to 0 then the router will be scheduled on every agent. (integer value)
+#max_l3_agents_per_router = 3
+
+# Subnet used for the l3 HA admin network. (string value)
+#l3_ha_net_cidr = 169.254.192.0/18
+
+# The network type to use when creating the HA network for an HA router. By
+# default or if empty, the first 'tenant_network_types' is used. This is
+# helpful when the VRRP traffic should use a specific network which is not the
+# default one. (string value)
+#l3_ha_network_type =
+
+# The physical network name with which the HA network can be created. (string
+# value)
+#l3_ha_network_physical_name =
+
+#
+# From neutron.extensions
+#
+
+# Maximum number of allowed address pairs (integer value)
+#max_allowed_address_pair = 10
+
+#
+# From oslo.log
+#
+
+# If set to true, the logging level will be set to DEBUG instead of the default
+# INFO level. (boolean value)
+# Note: This option can be changed without restarting.
+#debug = false
+
+# DEPRECATED: If set to false, the logging level will be set to WARNING instead
+# of the default INFO level. (boolean value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#verbose = true
+verbose = true
+
+# The name of a logging configuration file. This file is appended to any
+# existing logging configuration files. For details about logging configuration
+# files, see the Python logging module documentation. Note that when logging
+# configuration files are used then all logging configuration is set in the
+# configuration file and other logging configuration options are ignored (for
+# example, logging_context_format_string). (string value)
+# Note: This option can be changed without restarting.
+# Deprecated group/name - [DEFAULT]/log_config
+#log_config_append = <None>
+
+# Defines the format string for %%(asctime)s in log records. Default:
+# %(default)s . This option is ignored if log_config_append is set. (string
+# value)
+#log_date_format = %Y-%m-%d %H:%M:%S
+
+# (Optional) Name of log file to send logging output to. If no default is set,
+# logging will go to stderr as defined by use_stderr. This option is ignored if
+# log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logfile
+#log_file = <None>
+
+# (Optional) The base directory used for relative log_file paths. This option
+# is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logdir
+#log_dir = <None>
+
+# Uses logging handler designed to watch file system. When log file is moved or
+# removed this handler will open a new log file with specified path
+# instantaneously. It makes sense only if log_file option is specified and
+# Linux platform is used. This option is ignored if log_config_append is set.
+# (boolean value)
+#watch_log_file = false
+
+# Use syslog for logging. Existing syslog format is DEPRECATED and will be
+# changed later to honor RFC5424. This option is ignored if log_config_append
+# is set. (boolean value)
+#use_syslog = false
+
+# Syslog facility to receive log lines. This option is ignored if
+# log_config_append is set. (string value)
+#syslog_log_facility = LOG_USER
+
+# Log output to standard error. This option is ignored if log_config_append is
+# set. (boolean value)
+#use_stderr = false
+
+# Format string to use for log messages with context. (string value)
+#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
+
+# Format string to use for log messages when context is undefined. (string
+# value)
+#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
+
+# Additional data to append to log message when logging level for the message
+# is DEBUG. (string value)
+#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
+
+# Prefix each line of exception output with this format. (string value)
+#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
+
+# Defines the format string for %(user_identity)s that is used in
+# logging_context_format_string. (string value)
+#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
+
+# List of package logging levels in logger=LEVEL pairs. This option is ignored
+# if log_config_append is set. (list value)
+#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
+
+# Enables or disables publication of error events. (boolean value)
+#publish_errors = false
+
+# The format for an instance that is passed with the log message. (string
+# value)
+#instance_format = "[instance: %(uuid)s] "
+
+# The format for an instance UUID that is passed with the log message. (string
+# value)
+#instance_uuid_format = "[instance: %(uuid)s] "
+
+# Interval, number of seconds, of log rate limiting. (integer value)
+#rate_limit_interval = 0
+
+# Maximum number of logged messages per rate_limit_interval. (integer value)
+#rate_limit_burst = 0
+
+# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG
+# or empty string. Logs with level greater or equal to rate_limit_except_level
+# are not filtered. An empty string means that all levels are filtered. (string
+# value)
+#rate_limit_except_level = CRITICAL
+
+# Enables or disables fatal status of deprecations. (boolean value)
+#fatal_deprecations = false
+
+#
+# From oslo.messaging
+#
+
+# Size of RPC connection pool. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_conn_pool_size
+#rpc_conn_pool_size = 30
+
+# The pool size limit for connections expiration policy (integer value)
+#conn_pool_min_size = 2
+
+# The time-to-live in sec of idle connections in the pool (integer value)
+#conn_pool_ttl = 1200
+
+# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
+# The "host" option should point or resolve to this address. (string value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_bind_address
+#rpc_zmq_bind_address = *
+
+# MatchMaker driver. (string value)
+# Allowed values: redis, sentinel, dummy
+# Deprecated group/name - [DEFAULT]/rpc_zmq_matchmaker
+#rpc_zmq_matchmaker = redis
+
+# Number of ZeroMQ contexts, defaults to 1. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_contexts
+#rpc_zmq_contexts = 1
+
+# Maximum number of ingress messages to locally buffer per topic. Default is
+# unlimited. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_topic_backlog
+#rpc_zmq_topic_backlog = <None>
+
+# Directory for holding IPC sockets. (string value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_ipc_dir
+#rpc_zmq_ipc_dir = /var/run/openstack
+
+# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
+# "host" option, if running Nova. (string value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_host
+#rpc_zmq_host = localhost
+
+# Number of seconds to wait before all pending messages will be sent after
+# closing a socket. The default value of -1 specifies an infinite linger
+# period. The value of 0 specifies no linger period. Pending messages shall be
+# discarded immediately when the socket is closed. Positive values specify an
+# upper bound for the linger period. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
+#zmq_linger = -1
+zmq_linger = 30
+
+# The default number of seconds that poll should wait. Poll raises timeout
+# exception when timeout expired. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_poll_timeout
+#rpc_poll_timeout = 1
+
+# Expiration timeout in seconds of a name service record about existing target
+# ( < 0 means no timeout). (integer value)
+# Deprecated group/name - [DEFAULT]/zmq_target_expire
+#zmq_target_expire = 300
+
+# Update period in seconds of a name service record about existing target.
+# (integer value)
+# Deprecated group/name - [DEFAULT]/zmq_target_update
+#zmq_target_update = 180
+
+# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
+# value)
+# Deprecated group/name - [DEFAULT]/use_pub_sub
+#use_pub_sub = false
+
+# Use ROUTER remote proxy. (boolean value)
+# Deprecated group/name - [DEFAULT]/use_router_proxy
+#use_router_proxy = false
+
+# This option makes direct connections dynamic or static. It makes sense only
+# with use_router_proxy=False which means to use direct connections for direct
+# message types (ignored otherwise). (boolean value)
+#use_dynamic_connections = false
+
+# How many additional connections to a host will be made for failover reasons.
+# This option is actual only in dynamic connections mode. (integer value)
+#zmq_failover_connections = 2
+
+# Minimal port number for random ports range. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+# Deprecated group/name - [DEFAULT]/rpc_zmq_min_port
+#rpc_zmq_min_port = 49153
+
+# Maximal port number for random ports range. (integer value)
+# Minimum value: 1
+# Maximum value: 65536
+# Deprecated group/name - [DEFAULT]/rpc_zmq_max_port
+#rpc_zmq_max_port = 65536
+
+# Number of retries to find free port number before fail with ZMQBindError.
+# (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_bind_port_retries
+#rpc_zmq_bind_port_retries = 100
+
+# Default serialization mechanism for serializing/deserializing
+# outgoing/incoming messages (string value)
+# Allowed values: json, msgpack
+# Deprecated group/name - [DEFAULT]/rpc_zmq_serialization
+#rpc_zmq_serialization = json
+
+# This option configures round-robin mode in zmq socket. True means not keeping
+# a queue when server side disconnects. False means to keep queue and messages
+# even if server is disconnected, when the server appears we send all
+# accumulated messages to it. (boolean value)
+#zmq_immediate = true
+
+# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
+# other negative value) means to skip any overrides and leave it to OS default;
+# 0 and 1 (or any other positive value) mean to disable and enable the option
+# respectively. (integer value)
+#zmq_tcp_keepalive = -1
+
+# The duration between two keepalive transmissions in idle condition. The unit
+# is platform dependent, for example, seconds in Linux, milliseconds in Windows
+# etc. The default value of -1 (or any other negative value and 0) means to
+# skip any overrides and leave it to OS default. (integer value)
+#zmq_tcp_keepalive_idle = -1
+
+# The number of retransmissions to be carried out before declaring that remote
+# end is not available. The default value of -1 (or any other negative value
+# and 0) means to skip any overrides and leave it to OS default. (integer
+# value)
+#zmq_tcp_keepalive_cnt = -1
+
+# The duration between two successive keepalive retransmissions, if
+# acknowledgement to the previous keepalive transmission is not received. The
+# unit is platform dependent, for example, seconds in Linux, milliseconds in
+# Windows etc. The default value of -1 (or any other negative value and 0)
+# means to skip any overrides and leave it to OS default. (integer value)
+#zmq_tcp_keepalive_intvl = -1
+
+# Maximum number of (green) threads to work concurrently. (integer value)
+#rpc_thread_pool_size = 100
+
+# Expiration timeout in seconds of a sent/received message after which it is
+# not tracked anymore by a client/server. (integer value)
+#rpc_message_ttl = 300
+
+# Wait for message acknowledgements from receivers. This mechanism works only
+# via proxy without PUB/SUB. (boolean value)
+#rpc_use_acks = false
+
+# Number of seconds to wait for an ack from a cast/call. After each retry
+# attempt this timeout is multiplied by some specified multiplier. (integer
+# value)
+#rpc_ack_timeout_base = 15
+
+# Number to multiply base ack timeout by after each retry attempt. (integer
+# value)
+#rpc_ack_timeout_multiplier = 2
+
+# Default number of message sending attempts in case of any problems occurred:
+# positive value N means at most N retries, 0 means no retries, None or -1 (or
+# any other negative values) mean to retry forever. This option is used only if
+# acknowledgments are enabled. (integer value)
+#rpc_retry_attempts = 3
+
+# List of publisher hosts SubConsumer can subscribe on. This option has higher
+# priority then the default publishers list taken from the matchmaker. (list
+# value)
+#subscribe_on =
+
+# Size of executor thread pool. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
+#executor_thread_pool_size = 64
+executor_thread_pool_size = 70
+
+# Seconds to wait for a response from a call. (integer value)
+#rpc_response_timeout = 60
+rpc_response_timeout=60
+
+# A URL representing the messaging driver to use and its full configuration.
+# (string value)
+#transport_url = <None>
+{%- if server.message_queue.members is defined %}
+transport_url = rabbit://{% for member in server.message_queue.members -%}
+ {{ server.message_queue.user }}:{{ server.message_queue.password }}@{{ member.host }}:{{ member.get('port', 5672) }}
+ {%- if not loop.last -%},{%- endif -%}
+ {%- endfor -%}
+ /{{ server.message_queue.virtual_host }}
+{%- else %}
+transport_url = rabbit://{{ server.message_queue.user }}:{{ server.message_queue.password }}@{{ server.message_queue.host }}:{{ server.message_queue.port }}{{ server.message_queue.virtual_host }}
+{%- endif %}
+
+# DEPRECATED: The messaging driver to use, defaults to rabbit. Other drivers
+# include amqp and zmq. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rpc_backend = rabbit
+rpc_backend = rabbit
+
+# The default exchange under which topics are scoped. May be overridden by an
+# exchange name specified in the transport_url option. (string value)
+#control_exchange = neutron
+
+#
+# From oslo.service.wsgi
+#
+
+# File name for the paste.deploy config for api service (string value)
+#api_paste_config = api-paste.ini
+
+# A python format string that is used as the template to generate log lines.
+# The following values can beformatted into it: client_ip, date_time,
+# request_line, status_code, body_length, wall_seconds. (string value)
+#wsgi_log_format = %(client_ip)s "%(request_line)s" status: %(status_code)s len: %(body_length)s time: %(wall_seconds).7f
+
+# Sets the value of TCP_KEEPIDLE in seconds for each server socket. Not
+# supported on OS X. (integer value)
+#tcp_keepidle = 600
+
+# Size of the pool of greenthreads used by wsgi (integer value)
+#wsgi_default_pool_size = 100
+
+# Maximum line size of message headers to be accepted. max_header_line may need
+# to be increased when using large tokens (typically those generated when
+# keystone is configured to use PKI tokens with big service catalogs). (integer
+# value)
+#max_header_line = 16384
+
+# If False, closes the client socket connection explicitly. (boolean value)
+#wsgi_keep_alive = true
+
+# Timeout for client connections' socket operations. If an incoming connection
+# is idle for this number of seconds it will be closed. A value of '0' means
+# wait forever. (integer value)
+#client_socket_timeout = 900
+nova_url = http://{{ server.compute.host }}:8774/v2
+
+
+[agent]
+
+#
+# From neutron.agent
+#
+
+# Root helper application. Use 'sudo neutron-rootwrap
+# /etc/neutron/rootwrap.conf' to use the real root filter facility. Change to
+# 'sudo' to skip the filtering and just run the command directly. (string
+# value)
+root_helper = sudo /usr/bin/neutron-rootwrap /etc/neutron/rootwrap.conf
+
+# Use the root helper when listing the namespaces on a system. This may not be
+# required depending on the security configuration. If the root helper is not
+# required, set this to False for a performance improvement. (boolean value)
+#use_helper_for_ns_read = true
+
+# Root helper daemon application to use when possible. For the agent which
+# needs to execute commands in Dom0 in the hypervisor of XenServer, this item
+# should be set to 'xenapi_root_helper', so that it will keep a XenAPI session
+# to pass commands to Dom0. (string value)
+#root_helper_daemon = <None>
+
+# Seconds between nodes reporting state to server; should be less than
+# agent_down_time, best if it is half or less than agent_down_time. (floating
+# point value)
+#report_interval = 30
+report_interval = 10
+
+# Log agent heartbeats (boolean value)
+#log_agent_heartbeats = false
+
+# Add comments to iptables rules. Set to false to disallow the addition of
+# comments to generated iptables rules that describe each rule's purpose.
+# System must support the iptables comments module for addition of comments.
+# (boolean value)
+#comment_iptables_rules = true
+
+# Duplicate every iptables difference calculation to ensure the format being
+# generated matches the format of iptables-save. This option should not be
+# turned on for production systems because it imposes a performance penalty.
+# (boolean value)
+#debug_iptables_rules = false
+
+# Action to be executed when a child process dies (string value)
+# Allowed values: respawn, exit
+#check_child_processes_action = respawn
+
+# Interval between checks of child process liveness (seconds), use 0 to disable
+# (integer value)
+#check_child_processes_interval = 60
+
+# Availability zone of this node (string value)
+#availability_zone = nova
+
+
+[cors]
+
+#
+# From oslo.middleware.cors
+#
+
+# Indicate whether this resource may be shared with the domain received in the
+# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
+# slash. Example: https://horizon.example.com (list value)
+#allowed_origin = <None>
+
+# Indicate that the actual request can include user credentials (boolean value)
+#allow_credentials = true
+
+# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
+# Headers. (list value)
+#expose_headers = X-Auth-Token,X-Subject-Token,X-Service-Token,X-OpenStack-Request-ID,OpenStack-Volume-microversion
+
+# Maximum cache age of CORS preflight requests. (integer value)
+#max_age = 3600
+
+# Indicate which methods can be used during the actual request. (list value)
+#allow_methods = GET,PUT,POST,DELETE,PATCH
+
+# Indicate which header field names may be used during the actual request.
+# (list value)
+#allow_headers = X-Auth-Token,X-Identity-Status,X-Roles,X-Service-Catalog,X-User-Id,X-Tenant-Id,X-OpenStack-Request-ID
+
+
+[cors.subdomain]
+
+#
+# From oslo.middleware.cors
+#
+
+# Indicate whether this resource may be shared with the domain received in the
+# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
+# slash. Example: https://horizon.example.com (list value)
+#allowed_origin = <None>
+
+# Indicate that the actual request can include user credentials (boolean value)
+#allow_credentials = true
+
+# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
+# Headers. (list value)
+#expose_headers = X-Auth-Token,X-Subject-Token,X-Service-Token,X-OpenStack-Request-ID,OpenStack-Volume-microversion
+
+# Maximum cache age of CORS preflight requests. (integer value)
+#max_age = 3600
+
+# Indicate which methods can be used during the actual request. (list value)
+#allow_methods = GET,PUT,POST,DELETE,PATCH
+
+# Indicate which header field names may be used during the actual request.
+# (list value)
+#allow_headers = X-Auth-Token,X-Identity-Status,X-Roles,X-Service-Catalog,X-User-Id,X-Tenant-Id,X-OpenStack-Request-ID
+
+
+[database]
+
+#
+# From neutron.db
+#
+
+# Database engine for which script will be generated when using offline
+# migration. (string value)
+#engine =
+
+#
+# From oslo.db
+#
+
+# DEPRECATED: The file name to use with SQLite. (string value)
+# Deprecated group/name - [DEFAULT]/sqlite_db
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Should use config option connection or slave_connection to connect
+# the database.
+#sqlite_db = oslo.sqlite
+
+# If True, SQLite uses synchronous mode. (boolean value)
+# Deprecated group/name - [DEFAULT]/sqlite_synchronous
+#sqlite_synchronous = true
+
+# The back end to use for the database. (string value)
+# Deprecated group/name - [DEFAULT]/db_backend
+#backend = sqlalchemy
+
+# The SQLAlchemy connection string to use to connect to the database. (string
+# value)
+# Deprecated group/name - [DEFAULT]/sql_connection
+# Deprecated group/name - [DATABASE]/sql_connection
+# Deprecated group/name - [sql]/connection
+{% if server.backend.engine == "ml2" %}
+connection = {{ server.database.engine }}+pymysql://{{ server.database.user }}:{{ server.database.password }}@{{ server.database.host }}/{{ server.database.name }}?charset=utf8
+{% else %}
+connection = sqlite:////var/lib/neutron/neutron.sqlite
+{% endif %}
+# The SQLAlchemy connection string to use to connect to the slave database.
+# (string value)
+#slave_connection = <None>
+
+# The SQL mode to be used for MySQL sessions. This option, including the
+# default, overrides any server-set SQL mode. To use whatever SQL mode is set
+# by the server configuration, set this to no value. Example: mysql_sql_mode=
+# (string value)
+#mysql_sql_mode = TRADITIONAL
+
+# Timeout before idle SQL connections are reaped. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_idle_timeout
+# Deprecated group/name - [DATABASE]/sql_idle_timeout
+# Deprecated group/name - [sql]/idle_timeout
+#idle_timeout = 3600
+idle_timeout = 3600
+
+# Minimum number of SQL connections to keep open in a pool. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_min_pool_size
+# Deprecated group/name - [DATABASE]/sql_min_pool_size
+#min_pool_size = 1
+
+# Maximum number of SQL connections to keep open in a pool. Setting a value of
+# 0 indicates no limit. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_max_pool_size
+# Deprecated group/name - [DATABASE]/sql_max_pool_size
+#max_pool_size = 5
+max_pool_size = 20
+
+# Maximum number of database connection retries during startup. Set to -1 to
+# specify an infinite retry count. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_max_retries
+# Deprecated group/name - [DATABASE]/sql_max_retries
+#max_retries = 10
+max_retries = -1
+
+# Interval between retries of opening a SQL connection. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_retry_interval
+# Deprecated group/name - [DATABASE]/reconnect_interval
+#retry_interval = 10
+retry_interval = 2
+
+# If set, use this value for max_overflow with SQLAlchemy. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_max_overflow
+# Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
+#max_overflow = 50
+max_overflow = 20
+
+# Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
+# value)
+# Minimum value: 0
+# Maximum value: 100
+# Deprecated group/name - [DEFAULT]/sql_connection_debug
+#connection_debug = 0
+
+# Add Python stack traces to SQL as comment strings. (boolean value)
+# Deprecated group/name - [DEFAULT]/sql_connection_trace
+#connection_trace = false
+
+# If set, use this value for pool_timeout with SQLAlchemy. (integer value)
+# Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
+#pool_timeout = <None>
+
+# Enable the experimental use of database reconnect on connection lost.
+# (boolean value)
+#use_db_reconnect = false
+
+# Seconds between retries of a database transaction. (integer value)
+#db_retry_interval = 1
+
+# If True, increases the interval between retries of a database operation up to
+# db_max_retry_interval. (boolean value)
+#db_inc_retry_interval = true
+
+# If db_inc_retry_interval is set, the maximum seconds between retries of a
+# database operation. (integer value)
+#db_max_retry_interval = 10
+
+# Maximum retries in case of connection error or deadlock error before error is
+# raised. Set to -1 to specify an infinite retry count. (integer value)
+#db_max_retries = 20
+
+
+[keystone_authtoken]
+{% if server.backend.engine == "contrail" %}
+admin_token = {{ server.backend.token }}
+admin_user={{ server.backend.user }}
+admin_password={{ server.backend.password }}
+admin_tenant_name={{ server.backend.tenant }}
+{%- endif %}
+auth_region={{ server.identity.region }}
+auth_protocol=http
+revocation_cache_time = 10
+auth_type = password
+auth_host = {{ server.identity.host }}
+auth_port = 35357
+user_domain_id = {{ server.identity.get('domain', 'default') }}
+project_domain_id = {{ server.identity.get('domain', 'default') }}
+project_name = {{ server.identity.tenant }}
+username = {{ server.identity.user }}
+password = {{ server.identity.password }}
+auth_uri=http://{{ server.identity.host }}:5000
+auth_url=http://{{ server.identity.host }}:35357
+{%- if server.cache is defined %}
+memcached_servers={%- for member in server.cache.members %}{{ member.host }}:11211{% if not loop.last %},{% endif %}{%- endfor %}
+{%- endif %}
+#
+# From keystonemiddleware.auth_token
+#
+
+# Complete "public" Identity API endpoint. This endpoint should not be an
+# "admin" endpoint, as it should be accessible by all end users.
+# Unauthenticated clients are redirected to this endpoint to authenticate.
+# Although this endpoint should ideally be unversioned, client support in the
+# wild varies. If you're using a versioned v2 endpoint here, then this should
+# *not* be the same endpoint the service user utilizes for validating tokens,
+# because normal end users may not be able to reach that endpoint. (string
+# value)
+#auth_uri = <None>
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+# Do not handle authorization requests within the middleware, but delegate the
+# authorization decision to downstream WSGI components. (boolean value)
+#delay_auth_decision = false
+
+# Request timeout value for communicating with Identity API server. (integer
+# value)
+#http_connect_timeout = <None>
+
+# How many times are we trying to reconnect when communicating with Identity
+# API Server. (integer value)
+#http_request_max_retries = 3
+
+# Request environment key where the Swift cache object is stored. When
+# auth_token middleware is deployed with a Swift cache, use this option to have
+# the middleware share a caching backend with swift. Otherwise, use the
+# ``memcached_servers`` option instead. (string value)
+#cache = <None>
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# The region in which the identity server can be found. (string value)
+#region_name = <None>
+
+# DEPRECATED: Directory used to cache files related to PKI tokens. This option
+# has been deprecated in the Ocata release and will be removed in the P
+# release. (string value)
+# This option is deprecated for removal since Ocata.
+# Its value may be silently ignored in the future.
+# Reason: PKI token format is no longer supported.
+#signing_dir = <None>
+
+# Optionally specify a list of memcached server(s) to use for caching. If left
+# undefined, tokens will instead be cached in-process. (list value)
+# Deprecated group/name - [keystone_authtoken]/memcache_servers
+#memcached_servers = <None>
+
+# In order to prevent excessive effort spent validating tokens, the middleware
+# caches previously-seen tokens for a configurable duration (in seconds). Set
+# to -1 to disable caching completely. (integer value)
+#token_cache_time = 300
+
+# DEPRECATED: Determines the frequency at which the list of revoked tokens is
+# retrieved from the Identity service (in seconds). A high number of revocation
+# events combined with a low cache duration may significantly reduce
+# performance. Only valid for PKI tokens. This option has been deprecated in
+# the Ocata release and will be removed in the P release. (integer value)
+# This option is deprecated for removal since Ocata.
+# Its value may be silently ignored in the future.
+# Reason: PKI token format is no longer supported.
+#revocation_cache_time = 10
+
+# (Optional) If defined, indicate whether token data should be authenticated or
+# authenticated and encrypted. If MAC, token data is authenticated (with HMAC)
+# in the cache. If ENCRYPT, token data is encrypted and authenticated in the
+# cache. If the value is not one of these options or empty, auth_token will
+# raise an exception on initialization. (string value)
+# Allowed values: None, MAC, ENCRYPT
+#memcache_security_strategy = None
+
+# (Optional, mandatory if memcache_security_strategy is defined) This string is
+# used for key derivation. (string value)
+#memcache_secret_key = <None>
+
+# (Optional) Number of seconds memcached server is considered dead before it is
+# tried again. (integer value)
+#memcache_pool_dead_retry = 300
+
+# (Optional) Maximum total number of open connections to every memcached
+# server. (integer value)
+#memcache_pool_maxsize = 10
+
+# (Optional) Socket timeout in seconds for communicating with a memcached
+# server. (integer value)
+#memcache_pool_socket_timeout = 3
+
+# (Optional) Number of seconds a connection to memcached is held unused in the
+# pool before it is closed. (integer value)
+#memcache_pool_unused_timeout = 60
+
+# (Optional) Number of seconds that an operation will wait to get a memcached
+# client connection from the pool. (integer value)
+#memcache_pool_conn_get_timeout = 10
+
+# (Optional) Use the advanced (eventlet safe) memcached client pool. The
+# advanced pool will only work under python 2.x. (boolean value)
+#memcache_use_advanced_pool = false
+
+# (Optional) Indicate whether to set the X-Service-Catalog header. If False,
+# middleware will not ask for service catalog on token validation and will not
+# set the X-Service-Catalog header. (boolean value)
+#include_service_catalog = true
+
+# Used to control the use and type of token binding. Can be set to: "disabled"
+# to not check token binding. "permissive" (default) to validate binding
+# information if the bind type is of a form known to the server and ignore it
+# if not. "strict" like "permissive" but if the bind type is unknown the token
+# will be rejected. "required" any form of token binding is needed to be
+# allowed. Finally the name of a binding method that must be present in tokens.
+# (string value)
+#enforce_token_bind = permissive
+
+# DEPRECATED: If true, the revocation list will be checked for cached tokens.
+# This requires that PKI tokens are configured on the identity server. (boolean
+# value)
+# This option is deprecated for removal since Ocata.
+# Its value may be silently ignored in the future.
+# Reason: PKI token format is no longer supported.
+#check_revocations_for_cached = false
+
+# DEPRECATED: Hash algorithms to use for hashing PKI tokens. This may be a
+# single algorithm or multiple. The algorithms are those supported by Python
+# standard hashlib.new(). The hashes will be tried in the order given, so put
+# the preferred one first for performance. The result of the first hash will be
+# stored in the cache. This will typically be set to multiple values only while
+# migrating from a less secure algorithm to a more secure one. Once all the old
+# tokens are expired this option should be set to a single value for better
+# performance. (list value)
+# This option is deprecated for removal since Ocata.
+# Its value may be silently ignored in the future.
+# Reason: PKI token format is no longer supported.
+#hash_algorithms = md5
+
+# A choice of roles that must be present in a service token. Service tokens are
+# allowed to request that an expired token can be used and so this check should
+# tightly control that only actual services should be sending this token. Roles
+# here are applied as an ANY check so any role in this list must be present.
+# For backwards compatibility reasons this currently only affects the
+# allow_expired check. (list value)
+#service_token_roles = service
+
+# For backwards compatibility reasons we must let valid service tokens pass
+# that don't pass the service_token_roles check as valid. Setting this true
+# will become the default in a future release and should be enabled if
+# possible. (boolean value)
+#service_token_roles_required = false
+
+# Prefix to prepend at the beginning of the path. Deprecated, use identity_uri.
+# (string value)
+#auth_admin_prefix =
+
+# Host providing the admin Identity API endpoint. Deprecated, use identity_uri.
+# (string value)
+#auth_host = 127.0.0.1
+
+# Port of the admin Identity API endpoint. Deprecated, use identity_uri.
+# (integer value)
+#auth_port = 35357
+
+# Protocol of the admin Identity API endpoint. Deprecated, use identity_uri.
+# (string value)
+# Allowed values: http, https
+#auth_protocol = https
+
+# Complete admin Identity API endpoint. This should specify the unversioned
+# root endpoint e.g. https://localhost:35357/ (string value)
+#identity_uri = <None>
+
+# This option is deprecated and may be removed in a future release. Single
+# shared secret with the Keystone configuration used for bootstrapping a
+# Keystone installation, or otherwise bypassing the normal authentication
+# process. This option should not be used, use `admin_user` and
+# `admin_password` instead. (string value)
+#admin_token = <None>
+
+# Service username. (string value)
+#admin_user = <None>
+
+# Service user password. (string value)
+#admin_password = <None>
+
+# Service tenant name. (string value)
+#admin_tenant_name = admin
+
+# Authentication type to load (string value)
+# Deprecated group/name - [keystone_authtoken]/auth_plugin
+#auth_type = <None>
+
+# Config Section from which to load plugin specific options (string value)
+#auth_section = <None>
+
+
+[matchmaker_redis]
+
+#
+# From oslo.messaging
+#
+
+# DEPRECATED: Host to locate redis. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#host = 127.0.0.1
+
+# DEPRECATED: Use this port to connect to redis host. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#port = 6379
+
+# DEPRECATED: Password for Redis server (optional). (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#password =
+
+# DEPRECATED: List of Redis Sentinel hosts (fault tolerance mode), e.g.,
+# [host:port, host1:port ... ] (list value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#sentinel_hosts =
+
+# Redis replica set name. (string value)
+#sentinel_group_name = oslo-messaging-zeromq
+
+# Time in ms to wait between connection attempts. (integer value)
+#wait_timeout = 2000
+
+# Time in ms to wait before the transaction is killed. (integer value)
+#check_timeout = 20000
+
+# Timeout in ms on blocking socket operations. (integer value)
+#socket_timeout = 10000
+
+
+[nova]
+
+#
+# From neutron
+#
+
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = {{ server.compute.region }}
+
+# Type of the nova endpoint to use. This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Allowed values: public, admin, internal
+#endpoint_type = public
+endpoint_type = {{ server.identity.get('endpoint_type', 'public') }}
+
+#
+# From nova.auth
+#
+
+# Authentication URL (string value)
+#auth_url = <None>
+user_domain_id = {{ server.identity.get('domain', 'default') }}
+project_domain_id = {{ server.identity.get('domain', 'default') }}
+project_name = {{ server.identity.tenant }}
+password = {{ server.compute.password }}
+username = {{ server.compute.user }}
+auth_type = password
+auth_url = http://{{ server.identity.host }}:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+
+# PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# (string value)
+#cafile = <None>
+
+# PEM encoded client certificate cert file (string value)
+#certfile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used
+# for both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# PEM encoded client certificate key file (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+# Deprecated group/name - [nova]/tenant-id
+#project_id = <None>
+
+# Project name to scope to (string value)
+# Deprecated group/name - [nova]/tenant-name
+#project_name = <None>
+
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
+# User id (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [nova]/user-name
+#username = <None>
+
+
+[oslo_concurrency]
+
+#
+# From oslo.concurrency
+#
+
+# Enables or disables inter-process locks. (boolean value)
+# Deprecated group/name - [DEFAULT]/disable_process_locking
+#disable_process_locking = false
+
+# Directory to use for lock files. For security, the specified directory
+# should only be writable by the user running the processes that need locking.
+# Defaults to environment variable OSLO_LOCK_PATH. If OSLO_LOCK_PATH is not set
+# in the environment, use the Python tempfile.gettempdir function to find a
+# suitable location. If external locks are used, a lock path must be set.
+# (string value)
+# Deprecated group/name - [DEFAULT]/lock_path
+#lock_path = /tmp
+lock_path = $state_path/lock
+
+
+[oslo_messaging_amqp]
+
+#
+# From oslo.messaging
+#
+
+# Name for the AMQP container. must be globally unique. Defaults to a generated
+# UUID (string value)
+# Deprecated group/name - [amqp1]/container_name
+#container_name = <None>
+
+# Timeout for inactive connections (in seconds) (integer value)
+# Deprecated group/name - [amqp1]/idle_timeout
+#idle_timeout = 0
+
+# Debug: dump AMQP frames to stdout (boolean value)
+# Deprecated group/name - [amqp1]/trace
+#trace = false
+
+# CA certificate PEM file used to verify the server's certificate (string
+# value)
+# Deprecated group/name - [amqp1]/ssl_ca_file
+#ssl_ca_file =
+
+# Self-identifying certificate PEM file for client authentication (string
+# value)
+# Deprecated group/name - [amqp1]/ssl_cert_file
+#ssl_cert_file =
+
+# Private key PEM file used to sign ssl_cert_file certificate (optional)
+# (string value)
+# Deprecated group/name - [amqp1]/ssl_key_file
+#ssl_key_file =
+
+# Password for decrypting ssl_key_file (if encrypted) (string value)
+# Deprecated group/name - [amqp1]/ssl_key_password
+#ssl_key_password = <None>
+
+# DEPRECATED: Accept clients using either SSL or plain TCP (boolean value)
+# Deprecated group/name - [amqp1]/allow_insecure_clients
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Not applicable - not a SSL server
+#allow_insecure_clients = false
+
+# Space separated list of acceptable SASL mechanisms (string value)
+# Deprecated group/name - [amqp1]/sasl_mechanisms
+#sasl_mechanisms =
+
+# Path to directory that contains the SASL configuration (string value)
+# Deprecated group/name - [amqp1]/sasl_config_dir
+#sasl_config_dir =
+
+# Name of configuration file (without .conf suffix) (string value)
+# Deprecated group/name - [amqp1]/sasl_config_name
+#sasl_config_name =
+
+# User name for message broker authentication (string value)
+# Deprecated group/name - [amqp1]/username
+#username =
+
+# Password for message broker authentication (string value)
+# Deprecated group/name - [amqp1]/password
+#password =
+
+# Seconds to pause before attempting to re-connect. (integer value)
+# Minimum value: 1
+#connection_retry_interval = 1
+
+# Increase the connection_retry_interval by this many seconds after each
+# unsuccessful failover attempt. (integer value)
+# Minimum value: 0
+#connection_retry_backoff = 2
+
+# Maximum limit for connection_retry_interval + connection_retry_backoff
+# (integer value)
+# Minimum value: 1
+#connection_retry_interval_max = 30
+
+# Time to pause between re-connecting an AMQP 1.0 link that failed due to a
+# recoverable error. (integer value)
+# Minimum value: 1
+#link_retry_delay = 10
+
+# The maximum number of attempts to re-send a reply message which failed due to
+# a recoverable error. (integer value)
+# Minimum value: -1
+#default_reply_retry = 0
+
+# The deadline for an rpc reply message delivery. (integer value)
+# Minimum value: 5
+#default_reply_timeout = 30
+
+# The deadline for an rpc cast or call message delivery. Only used when caller
+# does not provide a timeout expiry. (integer value)
+# Minimum value: 5
+#default_send_timeout = 30
+
+# The deadline for a sent notification message delivery. Only used when caller
+# does not provide a timeout expiry. (integer value)
+# Minimum value: 5
+#default_notify_timeout = 30
+
+# The duration to schedule a purge of idle sender links. Detach link after
+# expiry. (integer value)
+# Minimum value: 1
+#default_sender_link_timeout = 600
+
+# Indicates the addressing mode used by the driver.
+# Permitted values:
+# 'legacy' - use legacy non-routable addressing
+# 'routable' - use routable addresses
+# 'dynamic' - use legacy addresses if the message bus does not support routing
+# otherwise use routable addressing (string value)
+#addressing_mode = dynamic
+
+# address prefix used when sending to a specific server (string value)
+# Deprecated group/name - [amqp1]/server_request_prefix
+#server_request_prefix = exclusive
+
+# address prefix used when broadcasting to all servers (string value)
+# Deprecated group/name - [amqp1]/broadcast_prefix
+#broadcast_prefix = broadcast
+
+# address prefix when sending to any server in group (string value)
+# Deprecated group/name - [amqp1]/group_request_prefix
+#group_request_prefix = unicast
+
+# Address prefix for all generated RPC addresses (string value)
+#rpc_address_prefix = openstack.org/om/rpc
+
+# Address prefix for all generated Notification addresses (string value)
+#notify_address_prefix = openstack.org/om/notify
+
+# Appended to the address prefix when sending a fanout message. Used by the
+# message bus to identify fanout messages. (string value)
+#multicast_address = multicast
+
+# Appended to the address prefix when sending to a particular RPC/Notification
+# server. Used by the message bus to identify messages sent to a single
+# destination. (string value)
+#unicast_address = unicast
+
+# Appended to the address prefix when sending to a group of consumers. Used by
+# the message bus to identify messages that should be delivered in a round-
+# robin fashion across consumers. (string value)
+#anycast_address = anycast
+
+# Exchange name used in notification addresses.
+# Exchange name resolution precedence:
+# Target.exchange if set
+# else default_notification_exchange if set
+# else control_exchange if set
+# else 'notify' (string value)
+#default_notification_exchange = <None>
+
+# Exchange name used in RPC addresses.
+# Exchange name resolution precedence:
+# Target.exchange if set
+# else default_rpc_exchange if set
+# else control_exchange if set
+# else 'rpc' (string value)
+#default_rpc_exchange = <None>
+
+# Window size for incoming RPC Reply messages. (integer value)
+# Minimum value: 1
+#reply_link_credit = 200
+
+# Window size for incoming RPC Request messages (integer value)
+# Minimum value: 1
+#rpc_server_credit = 100
+
+# Window size for incoming Notification messages (integer value)
+# Minimum value: 1
+#notify_server_credit = 100
+
+# Send messages of this type pre-settled.
+# Pre-settled messages will not receive acknowledgement
+# from the peer. Note well: pre-settled messages may be
+# silently discarded if the delivery fails.
+# Permitted values:
+# 'rpc-call' - send RPC Calls pre-settled
+# 'rpc-reply'- send RPC Replies pre-settled
+# 'rpc-cast' - Send RPC Casts pre-settled
+# 'notify' - Send Notifications pre-settled
+# (multi valued)
+#pre_settled = rpc-cast
+#pre_settled = rpc-reply
+
+
+[oslo_messaging_kafka]
+
+#
+# From oslo.messaging
+#
+
+# DEPRECATED: Default Kafka broker Host (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#kafka_default_host = localhost
+
+# DEPRECATED: Default Kafka broker Port (port value)
+# Minimum value: 0
+# Maximum value: 65535
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#kafka_default_port = 9092
+
+# Max fetch bytes of Kafka consumer (integer value)
+#kafka_max_fetch_bytes = 1048576
+
+# Default timeout(s) for Kafka consumers (integer value)
+#kafka_consumer_timeout = 1.0
+
+# Pool Size for Kafka Consumers (integer value)
+#pool_size = 10
+
+# The pool size limit for connections expiration policy (integer value)
+#conn_pool_min_size = 2
+
+# The time-to-live in sec of idle connections in the pool (integer value)
+#conn_pool_ttl = 1200
+
+# Group id for Kafka consumer. Consumers in one group will coordinate message
+# consumption (string value)
+#consumer_group = oslo_messaging_consumer
+
+# Upper bound on the delay for KafkaProducer batching in seconds (floating
+# point value)
+#producer_batch_timeout = 0.0
+
+# Size of batch for the producer async send (integer value)
+#producer_batch_size = 16384
+
+
+[oslo_messaging_notifications]
+
+#
+# From oslo.messaging
+#
+
+# The Drivers(s) to handle sending notifications. Possible values are
+# messaging, messagingv2, routing, log, test, noop (multi valued)
+# Deprecated group/name - [DEFAULT]/notification_driver
+#driver =
+{%- if server.notification is mapping %}
+driver = {{ server.notification.get('driver', 'messagingv2') }}
+{%- if server.notification.topics is defined %}
+topics = {{ server.notification.topics }}
+{%- endif %}
+{%- elif server.notification %}
+driver = messagingv2
+{%- endif %}
+
+# A URL representing the messaging driver to use for notifications. If not set,
+# we fall back to the same configuration used for RPC. (string value)
+# Deprecated group/name - [DEFAULT]/notification_transport_url
+#transport_url = <None>
+
+# AMQP topic used for OpenStack notifications. (list value)
+# Deprecated group/name - [rpc_notifier2]/topics
+# Deprecated group/name - [DEFAULT]/notification_topics
+#topics = notifications
+
+
+[oslo_messaging_rabbit]
+
+#
+# From oslo.messaging
+#
+
+# Use durable queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/amqp_durable_queues
+# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
+#amqp_durable_queues = false
+
+# Auto-delete queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/amqp_auto_delete
+#amqp_auto_delete = false
+
+# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
+# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
+# distributions. (string value)
+# Deprecated group/name - [DEFAULT]/kombu_ssl_version
+#kombu_ssl_version =
+
+# SSL key file (valid only if SSL enabled). (string value)
+# Deprecated group/name - [DEFAULT]/kombu_ssl_keyfile
+#kombu_ssl_keyfile =
+
+# SSL cert file (valid only if SSL enabled). (string value)
+# Deprecated group/name - [DEFAULT]/kombu_ssl_certfile
+#kombu_ssl_certfile =
+
+# SSL certification authority file (valid only if SSL enabled). (string value)
+# Deprecated group/name - [DEFAULT]/kombu_ssl_ca_certs
+#kombu_ssl_ca_certs =
+
+# How long to wait before reconnecting in response to an AMQP consumer cancel
+# notification. (floating point value)
+# Deprecated group/name - [DEFAULT]/kombu_reconnect_delay
+#kombu_reconnect_delay = 1.0
+
+# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not
+# be used. This option may not be available in future versions. (string value)
+#kombu_compression = <None>
+
+# How long to wait a missing client before abandoning to send it its replies.
+# This value should not be longer than rpc_response_timeout. (integer value)
+# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
+#kombu_missing_consumer_retry_timeout = 60
+
+# Determines how the next RabbitMQ node is chosen in case the one we are
+# currently connected to becomes unavailable. Takes effect only if more than
+# one RabbitMQ node is provided in config. (string value)
+# Allowed values: round-robin, shuffle
+#kombu_failover_strategy = round-robin
+
+# DEPRECATED: The RabbitMQ broker address where a single node is used. (string
+# value)
+# Deprecated group/name - [DEFAULT]/rabbit_host
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_host = localhost
+
+# DEPRECATED: The RabbitMQ broker port where a single node is used. (port
+# value)
+# Minimum value: 0
+# Maximum value: 65535
+# Deprecated group/name - [DEFAULT]/rabbit_port
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_port = 5672
+
+# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
+# Deprecated group/name - [DEFAULT]/rabbit_hosts
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_hosts = $rabbit_host:$rabbit_port
+
+# Connect over SSL for RabbitMQ. (boolean value)
+# Deprecated group/name - [DEFAULT]/rabbit_use_ssl
+#rabbit_use_ssl = false
+
+# DEPRECATED: The RabbitMQ userid. (string value)
+# Deprecated group/name - [DEFAULT]/rabbit_userid
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_userid = guest
+
+# DEPRECATED: The RabbitMQ password. (string value)
+# Deprecated group/name - [DEFAULT]/rabbit_password
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_password = guest
+
+# The RabbitMQ login method. (string value)
+# Allowed values: PLAIN, AMQPLAIN, RABBIT-CR-DEMO
+# Deprecated group/name - [DEFAULT]/rabbit_login_method
+#rabbit_login_method = AMQPLAIN
+
+# DEPRECATED: The RabbitMQ virtual host. (string value)
+# Deprecated group/name - [DEFAULT]/rabbit_virtual_host
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_virtual_host = /
+
+# How frequently to retry connecting with RabbitMQ. (integer value)
+#rabbit_retry_interval = 1
+rabbit_retry_interval = 1
+
+# How long to backoff for between retries when connecting to RabbitMQ. (integer
+# value)
+# Deprecated group/name - [DEFAULT]/rabbit_retry_backoff
+#rabbit_retry_backoff = 2
+rabbit_retry_backoff = 2
+
+# Maximum interval of RabbitMQ connection retries. Default is 30 seconds.
+# (integer value)
+#rabbit_interval_max = 30
+
+# DEPRECATED: Maximum number of RabbitMQ connection retries. Default is 0
+# (infinite retry count). (integer value)
+# Deprecated group/name - [DEFAULT]/rabbit_max_retries
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#rabbit_max_retries = 0
+rabbit_max_retries = 0
+
+# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this
+# option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring
+# is no longer controlled by the x-ha-policy argument when declaring a queue.
+# If you just want to make sure that all queues (except those with auto-
+# generated names) are mirrored across all nodes, run: "rabbitmqctl set_policy
+# HA '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value)
+# Deprecated group/name - [DEFAULT]/rabbit_ha_queues
+#rabbit_ha_queues = false
+
+# Positive integer representing duration in seconds for queue TTL (x-expires).
+# Queues which are unused for the duration of the TTL are automatically
+# deleted. The parameter affects only reply and fanout queues. (integer value)
+# Minimum value: 1
+#rabbit_transient_queues_ttl = 1800
+
+# Specifies the number of messages to prefetch. Setting to zero allows
+# unlimited messages. (integer value)
+#rabbit_qos_prefetch_count = 0
+
+# Number of seconds after which the Rabbit broker is considered down if
+# heartbeat's keep-alive fails (0 disable the heartbeat). EXPERIMENTAL (integer
+# value)
+#heartbeat_timeout_threshold = 60
+heartbeat_timeout_threshold = 0
+
+# How often times during the heartbeat_timeout_threshold we check the
+# heartbeat. (integer value)
+#heartbeat_rate = 2
+heartbeat_rate = 2
+
+# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake (boolean value)
+# Deprecated group/name - [DEFAULT]/fake_rabbit
+#fake_rabbit = false
+
+# Maximum number of channels to allow (integer value)
+#channel_max = <None>
+
+# The maximum byte size for an AMQP frame (integer value)
+#frame_max = <None>
+
+# How often to send heartbeats for consumer's connections (integer value)
+#heartbeat_interval = 3
+
+# Enable SSL (boolean value)
+#ssl = <None>
+
+# Arguments passed to ssl.wrap_socket (dict value)
+#ssl_options = <None>
+
+# Set socket timeout in seconds for connection's socket (floating point value)
+#socket_timeout = 0.25
+
+# Set TCP_USER_TIMEOUT in seconds for connection's socket (floating point
+# value)
+#tcp_user_timeout = 0.25
+
+# Set delay for reconnection to some host which has connection error (floating
+# point value)
+#host_connection_reconnect_delay = 0.25
+
+# Connection factory implementation (string value)
+# Allowed values: new, single, read_write
+#connection_factory = single
+
+# Maximum number of connections to keep queued. (integer value)
+#pool_max_size = 30
+
+# Maximum number of connections to create above `pool_max_size`. (integer
+# value)
+#pool_max_overflow = 0
+
+# Default number of seconds to wait for a connections to available (integer
+# value)
+#pool_timeout = 30
+
+# Lifetime of a connection (since creation) in seconds or None for no
+# recycling. Expired connections are closed on acquire. (integer value)
+#pool_recycle = 600
+
+# Threshold at which inactive (since release) connections are considered stale
+# in seconds or None for no staleness. Stale connections are closed on acquire.
+# (integer value)
+#pool_stale = 60
+
+# Default serialization mechanism for serializing/deserializing
+# outgoing/incoming messages (string value)
+# Allowed values: json, msgpack
+#default_serializer_type = json
+
+# Persist notification messages. (boolean value)
+#notification_persistence = false
+
+# Exchange name for sending notifications (string value)
+#default_notification_exchange = ${control_exchange}_notification
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# notification listener. (integer value)
+#notification_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during sending
+# notification, -1 means infinite retry. (integer value)
+#default_notification_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during sending
+# notification message (floating point value)
+#notification_retry_delay = 0.25
+
+# Time to live for rpc queues without consumers in seconds. (integer value)
+#rpc_queue_expiration = 60
+
+# Exchange name for sending RPC messages (string value)
+#default_rpc_exchange = ${control_exchange}_rpc
+
+# Exchange name for receiving RPC replies (string value)
+#rpc_reply_exchange = ${control_exchange}_rpc_reply
+
+# Max number of not acknowledged message which RabbitMQ can send to rpc
+# listener. (integer value)
+#rpc_listener_prefetch_count = 100
+
+# Max number of not acknowledged message which RabbitMQ can send to rpc reply
+# listener. (integer value)
+#rpc_reply_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during sending
+# reply. -1 means infinite retry during rpc_timeout (integer value)
+#rpc_reply_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during sending
+# reply. (floating point value)
+#rpc_reply_retry_delay = 0.25
+
+# Reconnecting retry count in case of connectivity problem during sending RPC
+# message, -1 means infinite retry. If actual retry attempts in not 0 the rpc
+# request could be processed more than one time (integer value)
+#default_rpc_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during sending RPC
+# message (floating point value)
+#rpc_retry_delay = 0.25
+
+
+[oslo_messaging_zmq]
+
+#
+# From oslo.messaging
+#
+
+# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
+# The "host" option should point or resolve to this address. (string value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_bind_address
+#rpc_zmq_bind_address = *
+
+# MatchMaker driver. (string value)
+# Allowed values: redis, sentinel, dummy
+# Deprecated group/name - [DEFAULT]/rpc_zmq_matchmaker
+#rpc_zmq_matchmaker = redis
+
+# Number of ZeroMQ contexts, defaults to 1. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_contexts
+#rpc_zmq_contexts = 1
+
+# Maximum number of ingress messages to locally buffer per topic. Default is
+# unlimited. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_topic_backlog
+#rpc_zmq_topic_backlog = <None>
+
+# Directory for holding IPC sockets. (string value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_ipc_dir
+#rpc_zmq_ipc_dir = /var/run/openstack
+
+# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
+# "host" option, if running Nova. (string value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_host
+#rpc_zmq_host = localhost
+
+# Number of seconds to wait before all pending messages will be sent after
+# closing a socket. The default value of -1 specifies an infinite linger
+# period. The value of 0 specifies no linger period. Pending messages shall be
+# discarded immediately when the socket is closed. Positive values specify an
+# upper bound for the linger period. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
+#zmq_linger = -1
+
+# The default number of seconds that poll should wait. Poll raises timeout
+# exception when timeout expired. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_poll_timeout
+#rpc_poll_timeout = 1
+
+# Expiration timeout in seconds of a name service record about existing target
+# ( < 0 means no timeout). (integer value)
+# Deprecated group/name - [DEFAULT]/zmq_target_expire
+#zmq_target_expire = 300
+
+# Update period in seconds of a name service record about existing target.
+# (integer value)
+# Deprecated group/name - [DEFAULT]/zmq_target_update
+#zmq_target_update = 180
+
+# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
+# value)
+# Deprecated group/name - [DEFAULT]/use_pub_sub
+#use_pub_sub = false
+
+# Use ROUTER remote proxy. (boolean value)
+# Deprecated group/name - [DEFAULT]/use_router_proxy
+#use_router_proxy = false
+
+# This option makes direct connections dynamic or static. It makes sense only
+# with use_router_proxy=False which means to use direct connections for direct
+# message types (ignored otherwise). (boolean value)
+#use_dynamic_connections = false
+
+# How many additional connections to a host will be made for failover reasons.
+# This option is actual only in dynamic connections mode. (integer value)
+#zmq_failover_connections = 2
+
+# Minimal port number for random ports range. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+# Deprecated group/name - [DEFAULT]/rpc_zmq_min_port
+#rpc_zmq_min_port = 49153
+
+# Maximal port number for random ports range. (integer value)
+# Minimum value: 1
+# Maximum value: 65536
+# Deprecated group/name - [DEFAULT]/rpc_zmq_max_port
+#rpc_zmq_max_port = 65536
+
+# Number of retries to find free port number before fail with ZMQBindError.
+# (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_bind_port_retries
+#rpc_zmq_bind_port_retries = 100
+
+# Default serialization mechanism for serializing/deserializing
+# outgoing/incoming messages (string value)
+# Allowed values: json, msgpack
+# Deprecated group/name - [DEFAULT]/rpc_zmq_serialization
+#rpc_zmq_serialization = json
+
+# This option configures round-robin mode in zmq socket. True means not keeping
+# a queue when server side disconnects. False means to keep queue and messages
+# even if server is disconnected, when the server appears we send all
+# accumulated messages to it. (boolean value)
+#zmq_immediate = true
+
+# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
+# other negative value) means to skip any overrides and leave it to OS default;
+# 0 and 1 (or any other positive value) mean to disable and enable the option
+# respectively. (integer value)
+#zmq_tcp_keepalive = -1
+
+# The duration between two keepalive transmissions in idle condition. The unit
+# is platform dependent, for example, seconds in Linux, milliseconds in Windows
+# etc. The default value of -1 (or any other negative value and 0) means to
+# skip any overrides and leave it to OS default. (integer value)
+#zmq_tcp_keepalive_idle = -1
+
+# The number of retransmissions to be carried out before declaring that remote
+# end is not available. The default value of -1 (or any other negative value
+# and 0) means to skip any overrides and leave it to OS default. (integer
+# value)
+#zmq_tcp_keepalive_cnt = -1
+
+# The duration between two successive keepalive retransmissions, if
+# acknowledgement to the previous keepalive transmission is not received. The
+# unit is platform dependent, for example, seconds in Linux, milliseconds in
+# Windows etc. The default value of -1 (or any other negative value and 0)
+# means to skip any overrides and leave it to OS default. (integer value)
+#zmq_tcp_keepalive_intvl = -1
+
+# Maximum number of (green) threads to work concurrently. (integer value)
+#rpc_thread_pool_size = 100
+
+# Expiration timeout in seconds of a sent/received message after which it is
+# not tracked anymore by a client/server. (integer value)
+#rpc_message_ttl = 300
+
+# Wait for message acknowledgements from receivers. This mechanism works only
+# via proxy without PUB/SUB. (boolean value)
+#rpc_use_acks = false
+
+# Number of seconds to wait for an ack from a cast/call. After each retry
+# attempt this timeout is multiplied by some specified multiplier. (integer
+# value)
+#rpc_ack_timeout_base = 15
+
+# Number to multiply base ack timeout by after each retry attempt. (integer
+# value)
+#rpc_ack_timeout_multiplier = 2
+
+# Default number of message sending attempts in case of any problems occurred:
+# positive value N means at most N retries, 0 means no retries, None or -1 (or
+# any other negative values) mean to retry forever. This option is used only if
+# acknowledgments are enabled. (integer value)
+#rpc_retry_attempts = 3
+
+# List of publisher hosts SubConsumer can subscribe on. This option has higher
+# priority then the default publishers list taken from the matchmaker. (list
+# value)
+#subscribe_on =
+
+
+[oslo_middleware]
+
+#
+# From oslo.middleware.http_proxy_to_wsgi
+#
+
+# Whether the application is behind a proxy or not. This determines if the
+# middleware should parse the headers or not. (boolean value)
+#enable_proxy_headers_parsing = false
+
+
+[oslo_policy]
+
+#
+# From oslo.policy
+#
+
+# The file that defines policies. (string value)
+# Deprecated group/name - [DEFAULT]/policy_file
+#policy_file = policy.json
+
+# Default rule. Enforced when a requested rule is not found. (string value)
+# Deprecated group/name - [DEFAULT]/policy_default_rule
+#policy_default_rule = default
+
+# Directories where policy configuration files are stored. They can be relative
+# to any directory in the search path defined by the config_dir option, or
+# absolute paths. The file defined by policy_file must exist for these
+# directories to be searched. Missing or empty directories are ignored. (multi
+# valued)
+# Deprecated group/name - [DEFAULT]/policy_dirs
+#policy_dirs = policy.d
+
+
+[qos]
+
+#
+# From neutron.qos
+#
+
+# DEPRECATED: Drivers list to use to send the update notification. This option
+# will be unused in Pike. (list value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#notification_drivers = message_queue
+
+
+[quotas]
+
+#
+# From neutron
+#
+
+# Default number of resource allowed per tenant. A negative value means
+# unlimited. (integer value)
+#default_quota = -1
+
+# Number of networks allowed per tenant. A negative value means unlimited.
+# (integer value)
+#quota_network = 10
+
+# Number of subnets allowed per tenant, A negative value means unlimited.
+# (integer value)
+#quota_subnet = 10
+
+# Number of ports allowed per tenant. A negative value means unlimited.
+# (integer value)
+#quota_port = 50
+
+# Default driver to use for quota checks. (string value)
+#quota_driver = neutron.db.quota.driver.DbQuotaDriver
+{% if server.backend.engine == "contrail" %}
+quota_driver = neutron_plugin_contrail.plugins.opencontrail.quota.driver.QuotaDriver
+{% endif %}
+# Keep in track in the database of current resource quota usage. Plugins which
+# do not leverage the neutron database should set this flag to False. (boolean
+# value)
+#track_quota_usage = true
+
+#
+# From neutron.extensions
+#
+
+# Number of routers allowed per tenant. A negative value means unlimited.
+# (integer value)
+#quota_router = 10
+
+# Number of floating IPs allowed per tenant. A negative value means unlimited.
+# (integer value)
+#quota_floatingip = 50
+
+# Number of security groups allowed per tenant. A negative value means
+# unlimited. (integer value)
+#quota_security_group = 10
+
+# Number of security rules allowed per tenant. A negative value means
+# unlimited. (integer value)
+#quota_security_group_rule = 100
+
+
+[ssl]
+
+#
+# From oslo.service.sslutils
+#
+
+# CA certificate file to use to verify connecting clients. (string value)
+# Deprecated group/name - [DEFAULT]/ssl_ca_file
+#ca_file = <None>
+
+# Certificate file to use when starting the server securely. (string value)
+# Deprecated group/name - [DEFAULT]/ssl_cert_file
+#cert_file = <None>
+
+# Private key file to use when starting the server securely. (string value)
+# Deprecated group/name - [DEFAULT]/ssl_key_file
+#key_file = <None>
+
+# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
+# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
+# distributions. (string value)
+#version = <None>
+
+# Sets the list of available ciphers. value should be a string in the OpenSSL
+# cipher list format. (string value)
+#ciphers = <None>
+[service_providers]
+
+{% if server.lbaas is defined -%}
+
+{%- if server.lbaas.enabled -%}
+
+{%- for lbaas_name, lbaas in server.lbaas.providers.iteritems() %}
+
+{%- if lbaas.engine == "avinetworks" -%}
+service_provider=LOADBALANCERV2:{{ lbaas_name }}:neutron_lbaas.drivers.avi.avi_driver.AviDriver
+
+[{{ lbaas_name }}]
+address={{ lbaas.controller_address }}
+user={{ lbaas.controller_user }}
+password={{ lbaas.controller_password }}
+cloud={{ lbaas.controller_cloud_name }}
+{%- endif -%}
+
+{%- endfor -%}
+
+{% endif %}
+
+{% elif server.backend.engine == "contrail" %}
+
+service_provider = LOADBALANCER:Opencontrail:neutron_plugin_contrail.plugins.opencontrail.loadbalancer.driver.OpencontrailLoadbalancerDriver:default
+
+{% include "neutron/files/"+server.version+"/ContrailPlugin.ini" %}
+
+{% endif %}
diff --git a/neutron/files/ocata/openvswitch_agent.ini b/neutron/files/ocata/openvswitch_agent.ini
new file mode 100644
index 0000000..0536d2a
--- /dev/null
+++ b/neutron/files/ocata/openvswitch_agent.ini
@@ -0,0 +1,337 @@
+{%- if pillar.neutron.gateway is defined %}
+{%- from "neutron/map.jinja" import gateway as neutron with context %}
+{%- else %}
+{%- from "neutron/map.jinja" import compute as neutron with context %}
+{%- endif %}
+
+[DEFAULT]
+
+#
+# From oslo.log
+#
+
+# If set to true, the logging level will be set to DEBUG instead of the default
+# INFO level. (boolean value)
+# Note: This option can be changed without restarting.
+#debug = false
+
+# DEPRECATED: If set to false, the logging level will be set to WARNING instead
+# of the default INFO level. (boolean value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#verbose = true
+
+# The name of a logging configuration file. This file is appended to any
+# existing logging configuration files. For details about logging configuration
+# files, see the Python logging module documentation. Note that when logging
+# configuration files are used then all logging configuration is set in the
+# configuration file and other logging configuration options are ignored (for
+# example, logging_context_format_string). (string value)
+# Note: This option can be changed without restarting.
+# Deprecated group/name - [DEFAULT]/log_config
+#log_config_append = <None>
+
+# Defines the format string for %%(asctime)s in log records. Default:
+# %(default)s . This option is ignored if log_config_append is set. (string
+# value)
+#log_date_format = %Y-%m-%d %H:%M:%S
+
+# (Optional) Name of log file to send logging output to. If no default is set,
+# logging will go to stderr as defined by use_stderr. This option is ignored if
+# log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logfile
+#log_file = <None>
+
+# (Optional) The base directory used for relative log_file paths. This option
+# is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logdir
+#log_dir = <None>
+
+# Uses logging handler designed to watch file system. When log file is moved or
+# removed this handler will open a new log file with specified path
+# instantaneously. It makes sense only if log_file option is specified and
+# Linux platform is used. This option is ignored if log_config_append is set.
+# (boolean value)
+#watch_log_file = false
+
+# Use syslog for logging. Existing syslog format is DEPRECATED and will be
+# changed later to honor RFC5424. This option is ignored if log_config_append
+# is set. (boolean value)
+#use_syslog = false
+
+# Syslog facility to receive log lines. This option is ignored if
+# log_config_append is set. (string value)
+#syslog_log_facility = LOG_USER
+
+# Log output to standard error. This option is ignored if log_config_append is
+# set. (boolean value)
+#use_stderr = false
+
+# Format string to use for log messages with context. (string value)
+#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
+
+# Format string to use for log messages when context is undefined. (string
+# value)
+#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
+
+# Additional data to append to log message when logging level for the message
+# is DEBUG. (string value)
+#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
+
+# Prefix each line of exception output with this format. (string value)
+#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
+
+# Defines the format string for %(user_identity)s that is used in
+# logging_context_format_string. (string value)
+#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
+
+# List of package logging levels in logger=LEVEL pairs. This option is ignored
+# if log_config_append is set. (list value)
+#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
+
+# Enables or disables publication of error events. (boolean value)
+#publish_errors = false
+
+# The format for an instance that is passed with the log message. (string
+# value)
+#instance_format = "[instance: %(uuid)s] "
+
+# The format for an instance UUID that is passed with the log message. (string
+# value)
+#instance_uuid_format = "[instance: %(uuid)s] "
+
+# Interval, number of seconds, of log rate limiting. (integer value)
+#rate_limit_interval = 0
+
+# Maximum number of logged messages per rate_limit_interval. (integer value)
+#rate_limit_burst = 0
+
+# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG
+# or empty string. Logs with level greater or equal to rate_limit_except_level
+# are not filtered. An empty string means that all levels are filtered. (string
+# value)
+#rate_limit_except_level = CRITICAL
+
+# Enables or disables fatal status of deprecations. (boolean value)
+#fatal_deprecations = false
+
+
+[agent]
+
+#
+# From neutron.ml2.ovs.agent
+#
+
+# The number of seconds the agent will wait between polling for local device
+# changes. (integer value)
+#polling_interval = 2
+
+# Minimize polling by monitoring ovsdb for interface changes. (boolean value)
+#minimize_polling = true
+
+# The number of seconds to wait before respawning the ovsdb monitor after
+# losing communication with it. (integer value)
+#ovsdb_monitor_respawn_interval = 30
+
+{%- if "vxlan" in neutron.backend.tenant_network_types %}
+tunnel_types =vxlan
+
+# The UDP port to use for VXLAN tunnels. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#vxlan_udp_port = 4789
+vxlan_udp_port = 4789
+
+# MTU size of veth interfaces (integer value)
+#veth_mtu = 9000
+
+# Use ML2 l2population mechanism driver to learn remote MAC and IPs and improve tunnel scalability. (boolean value)
+#l2_population = false
+l2_population = True
+
+# Enable local ARP responder if it is supported. Requires OVS 2.1 and ML2 l2population driver. Allows the switch (when supporting an
+# overlay) to respond to an ARP request locally without performing a costly ARP broadcast into the overlay. (boolean value)
+#arp_responder = false
+arp_responder = True
+{%- endif %}
+
+# DEPRECATED: Enable suppression of ARP responses that don't match an IP
+# address that belongs to the port from which they originate. Note: This
+# prevents the VMs attached to this agent from spoofing, it doesn't protect
+# them from other devices which have the capability to spoof (e.g. bare metal
+# or VMs attached to agents without this flag set to True). Spoofing rules will
+# not be added to any ports that have port security disabled. For LinuxBridge,
+# this requires ebtables. For OVS, it requires a version that supports matching
+# ARP headers. This option will be removed in Ocata so the only way to disable
+# protection will be via the port security extension. (boolean value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#prevent_arp_spoofing = true
+
+# Set or un-set the don't fragment (DF) bit on outgoing IP packet carrying
+# GRE/VXLAN tunnel. (boolean value)
+#dont_fragment = true
+
+# Make the l2 agent run in DVR mode. (boolean value)
+#enable_distributed_routing = false
+enable_distributed_routing = {{ neutron.get('dvr', 'False') }}
+
+# Set new timeout in seconds for new rpc calls after agent receives SIGTERM. If
+# value is set to 0, rpc timeout won't be changed (integer value)
+#quitting_rpc_timeout = 10
+
+# Reset flow table on start. Setting this to True will cause brief traffic
+# interruption. (boolean value)
+#drop_flows_on_start = false
+drop_flows_on_start = False
+
+# Set or un-set the tunnel header checksum on outgoing IP packet carrying
+# GRE/VXLAN tunnel. (boolean value)
+#tunnel_csum = false
+
+# DEPRECATED: Selects the Agent Type reported (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#agent_type = Open vSwitch agent
+
+# Extensions list to use (list value)
+#extensions =
+
+
+[ovs]
+
+#
+# From neutron.ml2.ovs.agent
+#
+
+# Integration bridge to use. Do not change this parameter unless you have a
+# good reason to. This is the name of the OVS integration bridge. There is one
+# per hypervisor. The integration bridge acts as a virtual 'patch bay'. All VM
+# VIFs are attached to this bridge and then 'patched' according to their
+# network connectivity. (string value)
+#integration_bridge = br-int
+integration_bridge = br-int
+
+# Tunnel bridge to use. (string value)
+#tunnel_bridge = br-tun
+tunnel_bridge = br-tun
+
+# Peer patch port in integration bridge for tunnel bridge. (string value)
+#int_peer_patch_port = patch-tun
+
+# Peer patch port in tunnel bridge for integration bridge. (string value)
+#tun_peer_patch_port = patch-int
+
+# IP address of local overlay (tunnel) network endpoint. Use either an IPv4 or
+# IPv6 address that resides on one of the host network interfaces. The IP
+# version of this value must match the value of the 'overlay_ip_version' option
+# in the ML2 plug-in configuration file on the neutron server node(s). (IP
+# address value)
+#local_ip = <None>
+{%- if "vxlan" in neutron.backend.tenant_network_types %}
+local_ip = {{ neutron.local_ip }}
+{%- endif %}
+
+# Comma-separated list of <physical_network>:<bridge> tuples mapping physical
+# network names to the agent's node-specific Open vSwitch bridge names to be
+# used for flat and VLAN networks. The length of bridge names should be no more
+# than 11. Each bridge must exist, and should have a physical network interface
+# configured as a port. All physical networks configured on the server should
+# have mappings to appropriate bridges on each agent. Note: If you remove a
+# bridge from this mapping, make sure to disconnect it from the integration
+# bridge as it won't be managed by the agent anymore. (list value)
+#bridge_mappings =
+{%- if "vlan" in neutron.backend.tenant_network_types %}
+bridge_mappings ={%- if neutron.get('external_access', True) %}physnet1:br-floating,{%- endif %}physnet2:br-prv
+{%- elif neutron.get('external_access', True) %}
+bridge_mappings =physnet1:br-floating
+{%- endif %}
+
+# Use veths instead of patch ports to interconnect the integration bridge to
+# physical networks. Support kernel without Open vSwitch patch port support so
+# long as it is set to True. (boolean value)
+#use_veth_interconnection = false
+
+# OpenFlow interface to use. (string value)
+# Allowed values: ovs-ofctl, native
+#of_interface = native
+
+# OVS datapath to use. 'system' is the default value and corresponds to the
+# kernel datapath. To enable the userspace datapath set this value to 'netdev'.
+# (string value)
+# Allowed values: system, netdev
+#datapath_type = system
+{%- if neutron.dpdk %}
+datapath_type = netdev
+{%- endif %}
+
+# OVS vhost-user socket directory. (string value)
+#vhostuser_socket_dir = /var/run/openvswitch
+
+# Address to listen on for OpenFlow connections. Used only for 'native' driver.
+# (IP address value)
+#of_listen_address = 127.0.0.1
+
+# Port to listen on for OpenFlow connections. Used only for 'native' driver.
+# (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#of_listen_port = 6633
+
+# Timeout in seconds to wait for the local switch connecting the controller.
+# Used only for 'native' driver. (integer value)
+#of_connect_timeout = 30
+
+# Timeout in seconds to wait for a single OpenFlow request. Used only for
+# 'native' driver. (integer value)
+#of_request_timeout = 10
+
+# The interface for interacting with the OVSDB (string value)
+# Allowed values: vsctl, native
+#ovsdb_interface = native
+
+# The connection string for the OVSDB backend. Will be used by ovsdb-client
+# when monitoring and used for the all ovsdb commands when native
+# ovsdb_interface is enabled (string value)
+#ovsdb_connection = tcp:127.0.0.1:6640
+
+
+[securitygroup]
+
+#
+# From neutron.ml2.ovs.agent
+#
+
+# Driver for security groups firewall in the L2 agent (string value)
+#firewall_driver = <None>
+{%- if neutron.dpdk %}
+firewall_driver = openvswitch
+{%- else %}
+firewall_driver = neutron.agent.linux.iptables_firewall.OVSHybridIptablesFirewallDriver
+{%- endif %}
+
+# Controls whether the neutron security group API is enabled in the server. It
+# should be false when using no security groups or using the nova security
+# group API. (boolean value)
+#enable_security_group = true
+enable_security_group = True
+
+# Use ipset to speed-up the iptables based security groups. Enabling ipset
+# support requires that ipset is installed on L2 agent node. (boolean value)
+#enable_ipset = true
+
+
+[xenapi]
+
+#
+# From neutron.ml2.xenapi
+#
+
+# URL for connection to XenServer/Xen Cloud Platform. (string value)
+#connection_url = <None>
+
+# Username for connection to XenServer/Xen Cloud Platform. (string value)
+#connection_username = <None>
+
+# Password for connection to XenServer/Xen Cloud Platform. (string value)
+#connection_password = <None>
diff --git a/neutron/files/ocata/sriov_agent.ini b/neutron/files/ocata/sriov_agent.ini
new file mode 100644
index 0000000..5f78a0e
--- /dev/null
+++ b/neutron/files/ocata/sriov_agent.ini
@@ -0,0 +1,148 @@
+{%- if pillar.neutron.gateway is defined %}
+{%- from "neutron/map.jinja" import gateway as neutron with context %}
+{%- else %}
+{%- from "neutron/map.jinja" import compute as neutron with context %}
+{%- endif %}
+[DEFAULT]
+
+#
+# From oslo.log
+#
+
+# If set to true, the logging level will be set to DEBUG instead of the default
+# INFO level. (boolean value)
+# Note: This option can be changed without restarting.
+#debug = false
+
+# DEPRECATED: If set to false, the logging level will be set to WARNING instead
+# of the default INFO level. (boolean value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#verbose = true
+
+# The name of a logging configuration file. This file is appended to any
+# existing logging configuration files. For details about logging configuration
+# files, see the Python logging module documentation. Note that when logging
+# configuration files are used then all logging configuration is set in the
+# configuration file and other logging configuration options are ignored (for
+# example, logging_context_format_string). (string value)
+# Note: This option can be changed without restarting.
+# Deprecated group/name - [DEFAULT]/log_config
+#log_config_append = <None>
+
+# Defines the format string for %%(asctime)s in log records. Default:
+# %(default)s . This option is ignored if log_config_append is set. (string
+# value)
+#log_date_format = %Y-%m-%d %H:%M:%S
+
+# (Optional) Name of log file to send logging output to. If no default is set,
+# logging will go to stderr as defined by use_stderr. This option is ignored if
+# log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logfile
+#log_file = <None>
+
+# (Optional) The base directory used for relative log_file paths. This option
+# is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logdir
+#log_dir = <None>
+
+# Uses logging handler designed to watch file system. When log file is moved or
+# removed this handler will open a new log file with specified path
+# instantaneously. It makes sense only if log_file option is specified and
+# Linux platform is used. This option is ignored if log_config_append is set.
+# (boolean value)
+#watch_log_file = false
+
+# Use syslog for logging. Existing syslog format is DEPRECATED and will be
+# changed later to honor RFC5424. This option is ignored if log_config_append
+# is set. (boolean value)
+#use_syslog = false
+
+# Syslog facility to receive log lines. This option is ignored if
+# log_config_append is set. (string value)
+#syslog_log_facility = LOG_USER
+
+# Log output to standard error. This option is ignored if log_config_append is
+# set. (boolean value)
+#use_stderr = false
+
+# Format string to use for log messages with context. (string value)
+#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
+
+# Format string to use for log messages when context is undefined. (string
+# value)
+#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
+
+# Additional data to append to log message when logging level for the message
+# is DEBUG. (string value)
+#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
+
+# Prefix each line of exception output with this format. (string value)
+#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
+
+# Defines the format string for %(user_identity)s that is used in
+# logging_context_format_string. (string value)
+#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
+
+# List of package logging levels in logger=LEVEL pairs. This option is ignored
+# if log_config_append is set. (list value)
+#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
+
+# Enables or disables publication of error events. (boolean value)
+#publish_errors = false
+
+# The format for an instance that is passed with the log message. (string
+# value)
+#instance_format = "[instance: %(uuid)s] "
+
+# The format for an instance UUID that is passed with the log message. (string
+# value)
+#instance_uuid_format = "[instance: %(uuid)s] "
+
+# Interval, number of seconds, of log rate limiting. (integer value)
+#rate_limit_interval = 0
+
+# Maximum number of logged messages per rate_limit_interval. (integer value)
+#rate_limit_burst = 0
+
+# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG
+# or empty string. Logs with level greater or equal to rate_limit_except_level
+# are not filtered. An empty string means that all levels are filtered. (string
+# value)
+#rate_limit_except_level = CRITICAL
+
+# Enables or disables fatal status of deprecations. (boolean value)
+#fatal_deprecations = false
+
+
+[agent]
+
+#
+# From neutron.ml2.sriov.agent
+#
+
+# Extensions list to use (list value)
+#extensions =
+
+
+[sriov_nic]
+
+#
+# From neutron.ml2.sriov.agent
+#
+
+# Comma-separated list of <physical_network>:<network_device> tuples mapping
+# physical network names to the agent's node-specific physical network device
+# interfaces of SR-IOV physical function to be used for VLAN networks. All
+# physical networks listed in network_vlan_ranges on the server should have
+# mappings to appropriate interfaces on each agent. (list value)
+#physical_device_mappings =
+physical_device_mappings = {%- for nic_name, sriov in neutron.backend.sriov.iteritems() %}{{ sriov.physical_network }}:{{ sriov.devname }}{% if not loop.last %},{% endif %}{%- endfor %}
+
+# Comma-separated list of <network_device>:<vfs_to_exclude> tuples, mapping
+# network_device to the agent's node-specific list of virtual functions that
+# should not be used for virtual networking. vfs_to_exclude is a semicolon-
+# separated list of virtual functions to exclude from network_device. The
+# network_device in the mapping should appear in the physical_device_mappings
+# list. (list value)
+#exclude_devices =
diff --git a/neutron/server.sls b/neutron/server.sls
index 23b439b..2f530e2 100644
--- a/neutron/server.sls
+++ b/neutron/server.sls
@@ -27,12 +27,14 @@
pkg.installed:
- name: neutron-plugin-contrail
+{%- if not grains.get('noservices', False) %}
neutron_server_service:
service.running:
- name: neutron-server
- enable: true
- watch:
- file: /etc/neutron/neutron.conf
+{%- endif %}
{%- endif %}
@@ -53,12 +55,14 @@
- require:
- file: /etc/neutron/plugins/ml2/ml2_conf.ini
+{%- if not grains.get('noservices', False) %}
neutron_db_manage:
cmd.run:
- name: neutron-db-manage --config-file /etc/neutron/neutron.conf --config-file /etc/neutron/plugins/ml2/ml2_conf.ini upgrade head
- require:
- file: /etc/neutron/neutron.conf
- file: /etc/neutron/plugins/ml2/ml2_conf.ini
+{%- endif %}
{%- endif %}
@@ -104,12 +108,14 @@
- dir_mode: 755
- template: jinja
+{%- if not grains.get('noservices', False) %}
neutron_db_manage:
cmd.run:
- name: neutron-db-manage --config-file /etc/neutron/neutron.conf --config-file /etc/neutron/plugins/midonet/midonet.ini upgrade head
- require:
- file: /etc/neutron/neutron.conf
- file: /etc/neutron/plugins/midonet/midonet.ini
+{%- endif %}
{%- if server.version == "kilo" %}
@@ -132,12 +138,14 @@
- python-neutron-lbaas
- python-neutron-fwaas
+{%- if not grains.get('noservices', False) %}
neutron_db_manage:
cmd.run:
- name: neutron-db-manage --subproject networking-midonet upgrade head
- require:
- file: /etc/neutron/neutron.conf
- file: /etc/neutron/plugins/midonet/midonet.ini
+{%- endif %}
{%- endif %}
{%- endif %}
diff --git a/tests/pillar/compute_dpdk.sls b/tests/pillar/compute_dpdk.sls
index 0a3a498..c56fb81 100644
--- a/tests/pillar/compute_dpdk.sls
+++ b/tests/pillar/compute_dpdk.sls
@@ -14,12 +14,12 @@
local_ip: 10.1.0.105
message_queue:
engine: rabbitmq
- host: 172.16.10.254
+ host: 127.0.0.1
password: workshop
port: 5672
user: openstack
virtual_host: /openstack
metadata:
- host: 172.16.10.254
+ host: 127.0.0.1
password: password
version: mitaka
diff --git a/tests/pillar/compute_dvr.sls b/tests/pillar/compute_dvr.sls
index 9f0160e..8d5f7d5 100644
--- a/tests/pillar/compute_dvr.sls
+++ b/tests/pillar/compute_dvr.sls
@@ -13,12 +13,12 @@
local_ip: 10.1.0.105
message_queue:
engine: rabbitmq
- host: 172.16.10.254
+ host: 127.0.0.1
password: workshop
port: 5672
user: openstack
virtual_host: /openstack
metadata:
- host: 172.16.10.254
+ host: 127.0.0.1
password: password
version: mitaka
\ No newline at end of file
diff --git a/tests/pillar/compute_legacy.sls b/tests/pillar/compute_legacy.sls
index ee9d7c8..154af25 100644
--- a/tests/pillar/compute_legacy.sls
+++ b/tests/pillar/compute_legacy.sls
@@ -13,12 +13,12 @@
local_ip: 10.1.0.105
message_queue:
engine: rabbitmq
- host: 172.16.10.254
+ host: 127.0.0.1
password: workshop
port: 5672
user: openstack
virtual_host: /openstack
metadata:
- host: 172.16.10.254
+ host: 127.0.0.1
password: password
version: mitaka
diff --git a/tests/pillar/compute_nonexternal_dvr.sls b/tests/pillar/compute_nonexternal_dvr.sls
index 42fee7e..8ce0da1 100644
--- a/tests/pillar/compute_nonexternal_dvr.sls
+++ b/tests/pillar/compute_nonexternal_dvr.sls
@@ -13,12 +13,12 @@
local_ip: 10.1.0.105
message_queue:
engine: rabbitmq
- host: 172.16.10.254
+ host: 127.0.0.1
password: workshop
port: 5672
user: openstack
virtual_host: /openstack
metadata:
- host: 172.16.10.254
+ host: 127.0.0.1
password: password
version: mitaka
diff --git a/tests/pillar/compute_sriov.sls b/tests/pillar/compute_sriov.sls
index 9504878..f5a106f 100644
--- a/tests/pillar/compute_sriov.sls
+++ b/tests/pillar/compute_sriov.sls
@@ -17,12 +17,12 @@
local_ip: 10.1.0.105
message_queue:
engine: rabbitmq
- host: 172.16.10.254
+ host: 127.0.0.1
password: workshop
port: 5672
user: openstack
virtual_host: /openstack
metadata:
- host: 172.16.10.254
+ host: 127.0.0.1
password: password
version: mitaka
diff --git a/tests/pillar/control_dvr.sls b/tests/pillar/control_dvr.sls
index 7684188..014de67 100644
--- a/tests/pillar/control_dvr.sls
+++ b/tests/pillar/control_dvr.sls
@@ -11,14 +11,14 @@
address: 172.16.10.101
port: 9696
compute:
- host: 172.16.10.254
+ host: 127.0.0.1
password: workshop
region: RegionOne
tenant: service
user: nova
database:
engine: mysql
- host: 172.16.10.254
+ host: 127.0.0.1
name: neutron
password: workshop
port: 3306
@@ -29,7 +29,7 @@
global_physnet_mtu: 1500
identity:
engine: keystone
- host: 172.16.10.254
+ host: 127.0.0.1
password: workshop
port: 35357
region: RegionOne
@@ -39,7 +39,7 @@
l3_ha: false
message_queue:
engine: rabbitmq
- host: 172.16.10.254
+ host: 127.0.0.1
password: workshop
port: 5672
user: openstack
diff --git a/tests/pillar/control_nodvr.sls b/tests/pillar/control_nodvr.sls
index 154c47e..8840b5e 100644
--- a/tests/pillar/control_nodvr.sls
+++ b/tests/pillar/control_nodvr.sls
@@ -11,14 +11,14 @@
address: 172.16.10.101
port: 9696
compute:
- host: 172.16.10.254
+ host: 127.0.0.1
password: workshop
region: RegionOne
tenant: service
user: nova
database:
engine: mysql
- host: 172.16.10.254
+ host: 127.0.0.1
name: neutron
password: workshop
port: 3306
@@ -29,7 +29,7 @@
global_physnet_mtu: 1500
identity:
engine: keystone
- host: 172.16.10.254
+ host: 127.0.0.1
password: workshop
port: 35357
region: RegionOne
@@ -39,7 +39,7 @@
l3_ha: True
message_queue:
engine: rabbitmq
- host: 172.16.10.254
+ host: 127.0.0.1
password: workshop
port: 5672
user: openstack
diff --git a/tests/pillar/gateway_dvr.sls b/tests/pillar/gateway_dvr.sls
index 7591008..2c47529 100644
--- a/tests/pillar/gateway_dvr.sls
+++ b/tests/pillar/gateway_dvr.sls
@@ -13,12 +13,12 @@
local_ip: 10.1.0.110
message_queue:
engine: rabbitmq
- host: 172.16.10.254
+ host: 127.0.0.1
password: workshop
port: 5672
user: openstack
virtual_host: /openstack
metadata:
- host: 172.16.10.254
+ host: 127.0.0.1
password: password
version: mitaka
\ No newline at end of file
diff --git a/tests/pillar/gateway_legacy.sls b/tests/pillar/gateway_legacy.sls
index 661eebd..d9b7ef8 100644
--- a/tests/pillar/gateway_legacy.sls
+++ b/tests/pillar/gateway_legacy.sls
@@ -13,12 +13,12 @@
local_ip: 10.1.0.110
message_queue:
engine: rabbitmq
- host: 172.16.10.254
+ host: 127.0.0.1
password: workshop
port: 5672
user: openstack
virtual_host: /openstack
metadata:
- host: 172.16.10.254
+ host: 127.0.0.1
password: password
version: mitaka
diff --git a/tests/pillar/repo_mos9.sls b/tests/pillar/repo_mos9.sls
new file mode 100644
index 0000000..cd14fe8
--- /dev/null
+++ b/tests/pillar/repo_mos9.sls
@@ -0,0 +1,8 @@
+linux:
+ system:
+ enabled: true
+ repo:
+ mirantis_openstack:
+ source: "deb http://mirror.fuel-infra.org/mos-repos/ubuntu/9.0/ mos9.0 main restricted"
+ architectures: amd64
+ key_url: "http://mirror.fuel-infra.org/mos-repos/ubuntu/9.0/archive-mos9.0.key"
diff --git a/tests/run_tests.sh b/tests/run_tests.sh
index 8c07e58..a4cac88 100755
--- a/tests/run_tests.sh
+++ b/tests/run_tests.sh
@@ -44,6 +44,7 @@
[ ! -d ${SALT_PILLAR_DIR} ] && mkdir -p ${SALT_PILLAR_DIR}
echo "base:" > ${SALT_PILLAR_DIR}/top.sls
for pillar in ${PILLARDIR}/*; do
+ grep ${FORMULA_NAME}: ${pillar} &>/dev/null || continue
state_name=$(basename ${pillar%.sls})
echo -e " ${state_name}:\n - ${state_name}" >> ${SALT_PILLAR_DIR}/top.sls
done
@@ -56,6 +57,7 @@
echo "base:" > ${SALT_FILE_DIR}/top.sls
for pillar in ${PILLARDIR}/*.sls; do
+ grep ${FORMULA_NAME}: ${pillar} &>/dev/null || continue
state_name=$(basename ${pillar%.sls})
echo -e " ${state_name}:\n - ${FORMULA_NAME}" >> ${SALT_FILE_DIR}/top.sls
done
@@ -126,6 +128,7 @@
run() {
for pillar in ${PILLARDIR}/*.sls; do
+ grep ${FORMULA_NAME}: ${pillar} &>/dev/null || continue
state_name=$(basename ${pillar%.sls})
salt_run --id=${state_name} state.show_sls ${FORMULA_NAME} || (log_err "Execution of ${FORMULA_NAME}.${state_name} failed"; exit 1)
done