diff --git a/.gitignore b/.gitignore
new file mode 100644
index 0000000..1bfce6e
--- /dev/null
+++ b/.gitignore
@@ -0,0 +1,4 @@
+tests/build/
+*.swp
+*.pyc
+.ropeproject
\ No newline at end of file
diff --git a/CHANGELOG.rst b/CHANGELOG.rst
new file mode 100644
index 0000000..1e66bd0
--- /dev/null
+++ b/CHANGELOG.rst
@@ -0,0 +1,10 @@
+neutron formula
+===============
+
+2016.4.1 (2016-04-15)
+
+- second release
+
+0.0.1 (2015-08-03)
+
+- Initial formula setup
diff --git a/LICENSE b/LICENSE
new file mode 100644
index 0000000..8e80b12
--- /dev/null
+++ b/LICENSE
@@ -0,0 +1,13 @@
+Copyright (c) 2014-2015 tcp cloud a. s.
+
+Licensed under the Apache License, Version 2.0 (the "License");
+you may not use this file except in compliance with the License.
+You may obtain a copy of the License at
+
+   http://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing, software
+distributed under the License is distributed on an "AS IS" BASIS,
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+See the License for the specific language governing permissions and
+limitations under the License.
\ No newline at end of file
diff --git a/Makefile b/Makefile
new file mode 100644
index 0000000..fc83783
--- /dev/null
+++ b/Makefile
@@ -0,0 +1,26 @@
+DESTDIR=/
+SALTENVDIR=/usr/share/salt-formulas/env
+RECLASSDIR=/usr/share/salt-formulas/reclass
+FORMULANAME=$(shell grep name: metadata.yml|head -1|cut -d : -f 2|grep -Eo '[a-z0-9\-]*')
+
+all:
+	@echo "make install - Install into DESTDIR"
+	@echo "make test    - Run tests"
+	@echo "make clean   - Cleanup after tests run"
+
+install:
+	# Formula
+	[ -d $(DESTDIR)/$(SALTENVDIR) ] || mkdir -p $(DESTDIR)/$(SALTENVDIR)
+	cp -a $(FORMULANAME) $(DESTDIR)/$(SALTENVDIR)/
+	[ ! -d _modules ] || cp -a _modules $(DESTDIR)/$(SALTENVDIR)/
+	[ ! -d _states ] || cp -a _states $(DESTDIR)/$(SALTENVDIR)/ || true
+	# Metadata
+	[ -d $(DESTDIR)/$(RECLASSDIR)/service/$(FORMULANAME) ] || mkdir -p $(DESTDIR)/$(RECLASSDIR)/service/$(FORMULANAME)
+	cp -a metadata/service/* $(DESTDIR)/$(RECLASSDIR)/service/$(FORMULANAME)
+
+test:
+	[ ! -d tests ] || (cd tests; ./run_tests.sh)
+
+clean:
+	[ ! -d tests/build ] || rm -rf tests/build
+	[ ! -d build ] || rm -rf build
diff --git a/README.rst b/README.rst
new file mode 100644
index 0000000..0ad803b
--- /dev/null
+++ b/README.rst
@@ -0,0 +1,208 @@
+=======================
+Neutron Network Service
+=======================
+
+Neutron is an OpenStack project to provide "networking as a service" between interface devices (e.g., vNICs) managed by other Openstack services (e.g., nova).
+
+Starting in the Folsom release, Neutron is a core and supported part of the OpenStack platform (for Essex, we were an "incubated" project, which means use is suggested only for those who really know what they're doing with Neutron). 
+
+Usage notes
+===========
+
+For live migration to work, you have to set migration param on bridge and switch nodes.
+
+.. code-block:: yaml
+
+    neutron:
+      bridge:
+        enabled: true
+        migration: true
+
+.. code-block:: yaml
+
+    neutron:
+      switch:
+        enabled: true
+        migration: true
+
+Furthermore you need to set private and public keys for user 'neutron'.
+
+Sample pillars
+==============
+
+Neutron Server on the controller node
+
+.. code-block:: yaml
+
+    neutron:
+      server:
+        enabled: true
+        version: havana
+        plugin: ml2/contrail
+        bind:
+          address: 172.20.0.1
+          port: 9696
+        tunnel_type: vxlan
+        public_networks:
+        - name: public
+          subnets:
+          - name: public-subnet
+            gateway: 10.0.0.1
+            network: 10.0.0.0/24
+            pool_start: 10.0.5.20
+            pool_end: 10.0.5.200
+            dhcp: False
+        database:
+          engine: mysql
+          host: 127.0.0.1
+          port: 3306
+          name: neutron
+          user: neutron
+          password: pwd
+        identity:
+          engine: keystone
+          host: 127.0.0.1
+          port: 35357
+          user: neutron
+          password: pwd
+          tenant: service
+        message_queue:
+          engine: rabbitmq
+          host: 127.0.0.1
+          port: 5672
+          user: openstack
+          password: pwd
+          virtual_host: '/openstack'
+        metadata:
+          host: 127.0.0.1
+          port: 8775
+          password: pass
+        fwaas: false
+
+Neutron bridge on the network node
+
+.. code-block:: yaml
+
+    neutron:
+      bridge:
+        enabled: true
+        version: havana
+        tunnel_type: vxlan
+        bind:
+          address: 172.20.0.2
+        database:
+          engine: mysql
+          host: 127.0.0.1
+          port: 3306
+          name: neutron
+          user: neutron
+          password: pwd
+        identity:
+          engine: keystone
+          host: 127.0.0.1
+          port: 35357
+          user: neutron
+          password: pwd
+          tenant: service
+        message_queue:
+          engine: rabbitmq
+          host: 127.0.0.1
+          port: 5672
+          user: openstack
+          password: pwd
+          virtual_host: '/openstack'
+
+Neutron switch on the compute node with live migration turned on
+
+.. code-block:: yaml
+
+    neutron:
+      switch:
+        enabled: true
+        version: havana
+        migration: True
+        tunnel_type: vxlan
+        bind:
+          address: 127.20.0.100
+        database:
+          engine: mysql
+          host: 127.0.0.1
+          port: 3306
+          name: neutron
+          user: neutron
+          password: pwd
+        identity:
+          engine: keystone
+          host: 127.0.0.1
+          port: 35357
+          user: neutron
+          password: pwd
+          tenant: service
+        message_queue:
+          engine: rabbitmq
+          host: 127.0.0.1
+          port: 5672
+          user: openstack
+          password: pwd
+          virtual_host: '/openstack'
+
+Neutron Keystone region
+
+.. code-block:: yaml
+
+    neutron:
+      server:
+        enabled: true
+        version: kilo
+        ...
+        identity:
+          region: RegionTwo
+        ...
+        compute:
+          region: RegionTwo
+        ...
+
+
+Client-side RabbitMQ HA setup
+
+.. code-block:: yaml
+
+    neutron:
+      server:
+        ....
+        message_queue:
+          engine: rabbitmq
+          members:
+            - host: 10.0.16.1
+            - host: 10.0.16.2
+            - host: 10.0.16.3
+          user: openstack
+          password: pwd
+          virtual_host: '/openstack'
+        ....
+
+
+
+Usage
+=====
+
+Fix RDO Neutron installation
+
+.. code-block:: yaml
+
+    neutron-db-manage --config-file /usr/share/neutron/neutron-dist.conf --config-file /etc/neutron/neutron.conf --config-file /etc/neutron/plugin.ini stamp havana
+
+Read more
+=========
+
+* https://wiki.openstack.org/wiki/Neutron
+* http://docs.openstack.org/havana/install-guide/install/zypper/content/install-neutron.install-plugin.ovs.gre.html
+* http://docs.openstack.org/admin-guide-cloud/content//ch_networking.html
+* https://github.com/marafa/openstack/blob/master/openstack-outside.sh
+* http://techbackground.blogspot.ie/2013/06/metadata-via-quantum-router.html
+* http://techbackground.blogspot.ie/2013/06/metadata-via-dhcp-namespace.html
+* http://developer.rackspace.com/blog/neutron-networking-l3-agent.html
+* http://docs.openstack.org/grizzly/basic-install/apt/content/basic-install_network.html#configure-l3
+* ML2 plugin http://openstack.redhat.com/ML2_plugin
+* https://github.com/stackforge/fuel-library/tree/master/deployment/puppet/neutron/files
+* http://openstack.redhat.com/forum/discussion/972/stable-havana-2013-2-3-update/p1
diff --git a/VERSION b/VERSION
new file mode 100644
index 0000000..1bad316
--- /dev/null
+++ b/VERSION
@@ -0,0 +1 @@
+2016.4.1
diff --git a/doc/source/conf.py b/doc/source/conf.py
new file mode 100644
index 0000000..e6cd972
--- /dev/null
+++ b/doc/source/conf.py
@@ -0,0 +1,73 @@
+# -*- coding: utf-8 -*-
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#    http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
+# implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+import os
+import sys
+
+sys.path.insert(0, os.path.abspath('../..'))
+# -- General configuration ----------------------------------------------------
+
+# Add any Sphinx extension module names here, as strings. They can be
+# extensions coming with Sphinx (named 'sphinx.ext.*') or your custom ones.
+extensions = [
+    'sphinx.ext.autodoc',
+]
+
+# autodoc generation is a bit aggressive and a nuisance when doing heavy
+# text edit cycles.
+# execute "export SPHINX_DEBUG=1" in your terminal to disable
+
+# The suffix of source filenames.
+source_suffix = '.rst'
+
+# The master toctree document.
+master_doc = 'index'
+
+# General information about the project.
+project = u'salt-formula-neutron'
+copyright = u'2015, OpenStack Foundation'
+
+# If true, '()' will be appended to :func: etc. cross-reference text.
+add_function_parentheses = True
+
+# If true, the current module name will be prepended to all description
+# unit titles (such as .. function::).
+add_module_names = True
+
+# The name of the Pygments (syntax highlighting) style to use.
+pygments_style = 'sphinx'
+
+# -- Options for HTML output --------------------------------------------------
+
+# The theme to use for HTML and HTML Help pages.  Major themes that come with
+# Sphinx are currently 'default' and 'sphinxdoc'.
+# html_theme_path = ["."]
+# html_theme = '_theme'
+# html_static_path = ['static']
+
+# Output file base name for HTML help builder.
+htmlhelp_basename = '%sdoc' % project
+
+# Grouping the document tree into LaTeX files. List of tuples
+# (source start file, target name, title, author, documentclass
+# [howto/manual]).
+latex_documents = [
+    ('index',
+     '%s.tex' % project,
+     u'%s Documentation' % project,
+     u'OpenStack Foundation', 'manual'),
+]
+
+# Example configuration for intersphinx: refer to the Python standard library.
+# intersphinx_mapping = {'http://docs.python.org/': None}
diff --git a/doc/source/index.rst b/doc/source/index.rst
new file mode 100644
index 0000000..a6210d3
--- /dev/null
+++ b/doc/source/index.rst
@@ -0,0 +1 @@
+.. include:: ../../README.rst
diff --git a/metadata.yml b/metadata.yml
new file mode 100644
index 0000000..17e1481
--- /dev/null
+++ b/metadata.yml
@@ -0,0 +1,3 @@
+name: "neutron"
+version: "2016.4.1"
+source: "https://github.com/tcpcloud/salt-formula-neutron"
\ No newline at end of file
diff --git a/metadata/service/bridge/single.yml b/metadata/service/bridge/single.yml
new file mode 100644
index 0000000..9475c1f
--- /dev/null
+++ b/metadata/service/bridge/single.yml
@@ -0,0 +1,29 @@
+applications:
+- neutron
+parameters:
+  neutron:
+    bridge:
+      enabled: true
+      version: icehouse
+      migration: true
+      mtu: 1500
+      bind:
+        address: ${linux:network:host:local:address}
+      metadata:
+        host: ${linux:network:host:vip:address}
+        port: 8775
+        password: metadataPass
+      identity:
+        engine: keystone
+        host: ${linux:network:host:vip:address}
+        port: 35357
+        user: neutron
+        password: ${_secret:keystone_neutron_password}
+        tenant: service
+      message_queue:
+        engine: rabbitmq
+        host: ${linux:network:host:vip:address}
+        port: 5672
+        user: openstack
+        password: ${_secret:rabbitmq_openstack_password}
+        virtual_host: '/openstack'
diff --git a/metadata/service/control/cluster.yml b/metadata/service/control/cluster.yml
new file mode 100644
index 0000000..c5ef5c0
--- /dev/null
+++ b/metadata/service/control/cluster.yml
@@ -0,0 +1,43 @@
+applications:
+- neutron
+classes:
+- service.neutron.support
+parameters:
+  neutron:
+    server:
+      enabled: true
+      fwaas: false
+      dns_domain: novalocal
+      tunnel_type: vxlan
+      version: ${_param:neutron_version}
+      bind:
+        address: ${_param:cluster_local_address}
+        port: 9696
+      database:
+        engine: mysql
+        host: ${_param:cluster_vip_address}
+        port: 3306
+        name: neutron
+        user: neutron
+        password: ${_param:mysql_neutron_password}
+      identity:
+        engine: keystone
+        region: RegionOne
+        host: ${_param:cluster_vip_address}
+        port: 35357
+        user: neutron
+        password: ${_param:keystone_neutron_password}
+        tenant: service
+      message_queue:
+        engine: rabbitmq
+        host: ${_param:cluster_vip_address}
+        port: 5672
+        user: openstack
+        password: ${_param:rabbitmq_openstack_password}
+        virtual_host: '/openstack'
+      compute:
+        host: ${_param:cluster_vip_address}
+        region: RegionOne
+        user: nova
+        password: ${_param:keystone_nova_password}
+        tenant: service
diff --git a/metadata/service/control/single.yml b/metadata/service/control/single.yml
new file mode 100644
index 0000000..ea2c0f7
--- /dev/null
+++ b/metadata/service/control/single.yml
@@ -0,0 +1,44 @@
+applications:
+- neutron
+classes:
+- service.neutron.support
+parameters:
+  neutron:
+    server:
+      enabled: true
+      plugin: ml2
+      fwaas: false
+      dns_domain: novalocal
+      tunnel_type: vxlan
+      version: ${_param:neutron_version}
+      bind:
+        address: ${_param:single_address}
+        port: 9696
+      database:
+        engine: mysql
+        host: ${_param:single_address}
+        port: 3306
+        name: neutron
+        user: neutron
+        password: ${_param:mysql_neutron_password}
+      identity:
+        engine: keystone
+        region: RegionOne
+        host: ${_param:single_address}
+        port: 35357
+        user: neutron
+        password: ${_param:keystone_neutron_password}
+        tenant: service
+      message_queue:
+        engine: rabbitmq
+        host: ${_param:single_address}
+        port: 5672
+        user: openstack
+        password: ${_param:rabbitmq_openstack_password}
+        virtual_host: '/openstack'
+      compute:
+        host: ${_param:single_address}
+        region: RegionOne
+        user: nova
+        password: ${_param:keystone_nova_password}
+        tenant: service
diff --git a/metadata/service/support.yml b/metadata/service/support.yml
new file mode 100644
index 0000000..b4e3021
--- /dev/null
+++ b/metadata/service/support.yml
@@ -0,0 +1,11 @@
+parameters:
+  neutron:
+    _support:
+      collectd:
+        enabled: false
+      heka:
+        enabled: false
+      sensu:
+        enabled: true
+      sphinx:
+        enabled: true
\ No newline at end of file
diff --git a/metadata/service/switch/single.yml b/metadata/service/switch/single.yml
new file mode 100644
index 0000000..29d6749
--- /dev/null
+++ b/metadata/service/switch/single.yml
@@ -0,0 +1,33 @@
+applications:
+- neutron
+parameters:
+  neutron:
+    switch:
+      enabled: true
+      version: icehouse
+      mtu: 1500
+      tunnel_type: gre
+      bind:
+        address: ${linux:network:host:local:address}
+      database:
+        engine: mysql
+        host: ${linux:network:host:vip:address}
+        port: 3306
+        name: neutron
+        user: neutron
+        password: ${_secret:mysql_neutron_password}
+      identity:
+        engine: keystone
+        host: ${linux:network:host:vip:address}
+        port: 35357
+        user: neutron
+        password: ${_secret:keystone_neutron_password}
+        tenant: service
+      message_queue:
+        engine: rabbitmq
+        host: ${linux:network:host:vip:address}
+        port: 5672
+        user: openstack
+        password: ${_secret:rabbitmq_openstack_password}
+        virtual_host: '/openstack'
+        ha_queues: true
diff --git a/neutron/bridge.sls b/neutron/bridge.sls
new file mode 100644
index 0000000..7678127
--- /dev/null
+++ b/neutron/bridge.sls
@@ -0,0 +1,6 @@
+{% from "neutron/map.jinja" import bridge with context %}
+{%- if bridge.enabled %}
+
+{#TBD: prepared role for OpenVSwitch implementation on Network node side#}
+
+{%- endif %}
\ No newline at end of file
diff --git a/neutron/compute.sls b/neutron/compute.sls
new file mode 100644
index 0000000..9e92b40
--- /dev/null
+++ b/neutron/compute.sls
@@ -0,0 +1,6 @@
+{% from "neutron/map.jinja" import compute with context %}
+{%- if compute.enabled %}
+
+{#TBD: prepared role for OpenVSwitch implementation on Compute node side#}
+
+{%- endif %}
\ No newline at end of file
diff --git a/neutron/files/juno/ContrailPlugin.ini b/neutron/files/juno/ContrailPlugin.ini
new file mode 100644
index 0000000..1fed366
--- /dev/null
+++ b/neutron/files/juno/ContrailPlugin.ini
@@ -0,0 +1,15 @@
+{% from "neutron/map.jinja" import server with context %}
+{% from "opencontrail/map.jinja" import config with context %}
+[APISERVER]
+api_server_ip = {{ config.discovery.host }}
+api_server_port = 8082
+multi_tenancy = True
+contrail_extensions = ipam:neutron_plugin_contrail.plugins.opencontrail.contrail_plugin_ipam.NeutronPluginContrailIpam,policy:neutron_plugin_contrail.plugins.opencontrail.contrail_plugin_policy.NeutronPluginContrailPolicy,route-table:neutron_plugin_contrail.plugins.opencontrail.contrail_plugin_vpc.NeutronPluginContrailVpc,contrail:None
+
+[KEYSTONE]
+auth_url = http://{{ config.identity.host }}:35357/v2.0
+admin_token = {{ config.identity.token }}
+admin_user={{ config.identity.user }}
+admin_password={{ config.identity.password }}
+admin_tenant_name={{ config.identity.tenant }}
+
diff --git a/neutron/files/juno/api-paste.ini.Debian b/neutron/files/juno/api-paste.ini.Debian
new file mode 100644
index 0000000..7c26074
--- /dev/null
+++ b/neutron/files/juno/api-paste.ini.Debian
@@ -0,0 +1,39 @@
+{%- if pillar.neutron.server is defined %}
+{%- set neutron = pillar.neutron.server %}
+{%- elif pillar.neutron.switch is defined %}
+{%- set neutron = pillar.neutron.switch %}
+{%- elif pillar.neutron.bridge is defined %}
+{%- set neutron = pillar.neutron.bridge %}
+{%- endif %}
+[composite:neutron]
+use = egg:Paste#urlmap
+/: neutronversions
+/v2.0: neutronapi_v2_0
+
+[composite:neutronapi_v2_0]
+use = call:neutron.auth:pipeline_factory
+noauth = extensions neutronapiapp_v2_0
+keystone = authtoken keystonecontext extensions neutronapiapp_v2_0
+
+[filter:keystonecontext]
+paste.filter_factory = neutron.auth:NeutronKeystoneContext.factory
+
+[filter:authtoken]
+paste.filter_factory = keystoneclient.middleware.auth_token:filter_factory
+auth_port={{ neutron.identity.port }}
+auth_protocol=http
+auth_url=http://{{ neutron.identity.host }}:{{ neutron.identity.port }}/v2.0
+auth_host={{ neutron.identity.host }}
+admin_tenant_name = {{ neutron.identity.tenant }}
+admin_user = {{ neutron.identity.user }}
+admin_password = {{ neutron.identity.password }}
+signing_dir = /var/lib/neutron/keystone-signing
+
+[filter:extensions]
+paste.filter_factory = neutron.api.extensions:plugin_aware_extension_middleware_factory
+
+[app:neutronversions]
+paste.app_factory = neutron.api.versions:Versions.factory
+
+[app:neutronapiapp_v2_0]
+paste.app_factory = neutron.api.v2.router:APIRouter.factory
diff --git a/neutron/files/juno/api-paste.ini.RedHat b/neutron/files/juno/api-paste.ini.RedHat
new file mode 120000
index 0000000..08fd76a
--- /dev/null
+++ b/neutron/files/juno/api-paste.ini.RedHat
@@ -0,0 +1 @@
+api-paste.ini.Debian
\ No newline at end of file
diff --git a/neutron/files/juno/neutron-server b/neutron/files/juno/neutron-server
new file mode 100644
index 0000000..9b06503
--- /dev/null
+++ b/neutron/files/juno/neutron-server
@@ -0,0 +1,16 @@
+# Generated by Salt.
+{%- from "neutron/map.jinja" import server with context %}
+
+# defaults for neutron-server
+
+# path to config file corresponding to the core_plugin specified in
+# neutron.conf
+#NEUTRON_PLUGIN_CONFIG="/etc/neutron/plugins/openvswitch/ovs_neutron_plugin.ini"
+
+{%- if server.plugin == "ml2" %}
+NEUTRON_PLUGIN_CONFIG="/etc/neutron/plugins/ml2/ml2_conf.ini"
+{%- endif %}
+
+{%- if server.plugin == "contrail" %}
+NEUTRON_PLUGIN_CONFIG="/etc/neutron/plugins/opencontrail/ContrailPlugin.ini"
+{%- endif %}
\ No newline at end of file
diff --git a/neutron/files/juno/neutron-server.conf.contrail.Debian b/neutron/files/juno/neutron-server.conf.contrail.Debian
new file mode 100644
index 0000000..63aa88c
--- /dev/null
+++ b/neutron/files/juno/neutron-server.conf.contrail.Debian
@@ -0,0 +1,514 @@
+{%- set neutron = pillar.neutron.server %}
+{%- from "neutron/map.jinja" import server with context %}
+[DEFAULT]
+# Print more verbose output (set logging level to INFO instead of default WARNING level).
+# verbose = False
+
+# Print debugging output (set logging level to DEBUG instead of default WARNING level).
+# debug = False
+
+# Where to store Neutron state files.  This directory must be writable by the
+# user executing the agent.
+state_path = /var/lib/neutron
+
+# Where to store lock files
+lock_path = $state_path/lock
+
+# log_format = %(asctime)s %(levelname)8s [%(name)s] %(message)s
+# log_date_format = %Y-%m-%d %H:%M:%S
+
+# use_syslog                           -> syslog
+# log_file and log_dir                 -> log_dir/log_file
+# (not log_file) and log_dir           -> log_dir/{binary_name}.log
+# use_stderr                           -> stderr
+# (not user_stderr) and (not log_file) -> stdout
+# publish_errors                       -> notification system
+
+# use_syslog = False
+# syslog_log_facility = LOG_USER
+
+# use_stderr = True
+# log_file =
+# log_dir =
+
+# publish_errors = False
+
+# Address to bind the API server to
+# bind_host = 0.0.0.0
+bind_host = {{ neutron.bind.address }}
+
+# Port the bind the API server to
+# bind_port = 9696
+bind_port = {{ neutron.bind.port }}
+
+# Path to the extensions.  Note that this can be a colon-separated list of
+# paths.  For example:
+# api_extensions_path = extensions:/path/to/more/extensions:/even/more/extensions
+# The __path__ of neutron.extensions is appended to this, so if your
+# extensions are in there you don't need to specify them here
+# api_extensions_path =
+
+# (StrOpt) Neutron core plugin entrypoint to be loaded from the
+# neutron.core_plugins namespace. See setup.cfg for the entrypoint names of the
+# plugins included in the neutron source distribution. For compatibility with
+# previous versions, the class name of a plugin can be specified instead of its
+# entrypoint name.
+#
+core_plugin = neutron_plugin_contrail.plugins.opencontrail.contrail_plugin.NeutronPluginContrailCoreV2
+api_extensions_path = extensions:/usr/lib/python2.7/dist-packages/neutron_plugin_contrail/extensions
+# Example: core_plugin = ml2
+
+# (ListOpt) List of service plugin entrypoints to be loaded from the
+# neutron.service_plugins namespace. See setup.cfg for the entrypoint names of
+# the plugins included in the neutron source distribution. For compatibility
+# with previous versions, the class name of a plugin can be specified instead
+# of its entrypoint name.
+#
+# service_plugins =
+# Example: service_plugins = router,firewall,lbaas,vpnaas,metering
+
+# Paste configuration file
+# api_paste_config = api-paste.ini
+
+# The strategy to be used for auth.
+# Supported values are 'keystone'(default), 'noauth'.
+# auth_strategy = keystone
+
+# Base MAC address. The first 3 octets will remain unchanged. If the
+# 4h octet is not 00, it will also be used. The others will be
+# randomly generated.
+# 3 octet
+# base_mac = fa:16:3e:00:00:00
+# 4 octet
+# base_mac = fa:16:3e:4f:00:00
+
+# Maximum amount of retries to generate a unique MAC address
+# mac_generation_retries = 16
+
+# DHCP Lease duration (in seconds)
+# dhcp_lease_duration = 86400
+
+# Allow sending resource operation notification to DHCP agent
+# dhcp_agent_notification = True
+
+# Enable or disable bulk create/update/delete operations
+# allow_bulk = True
+# Enable or disable pagination
+# allow_pagination = False
+# Enable or disable sorting
+# allow_sorting = False
+# Enable or disable overlapping IPs for subnets
+# Attention: the following parameter MUST be set to False if Neutron is
+# being used in conjunction with nova security groups
+# allow_overlapping_ips = False
+# Ensure that configured gateway is on subnet
+# force_gateway_on_subnet = False
+
+
+# RPC configuration options. Defined in rpc __init__
+# The messaging module to use, defaults to kombu.
+# rpc_backend = neutron.openstack.common.rpc.impl_kombu
+# Size of RPC thread pool
+# rpc_thread_pool_size = 64
+# Size of RPC connection pool
+# rpc_conn_pool_size = 30
+# Seconds to wait for a response from call or multicall
+# rpc_response_timeout = 60
+# Seconds to wait before a cast expires (TTL). Only supported by impl_zmq.
+# rpc_cast_timeout = 30
+# Modules of exceptions that are permitted to be recreated
+# upon receiving exception data from an rpc call.
+# allowed_rpc_exception_modules = neutron.openstack.common.exception, nova.exception
+# AMQP exchange to connect to if using RabbitMQ or QPID
+# control_exchange = neutron
+
+# If passed, use a fake RabbitMQ provider
+# fake_rabbit = False
+
+# Configuration options if sending notifications via kombu rpc (these are
+# the defaults)
+# SSL version to use (valid only if SSL enabled)
+# kombu_ssl_version =
+# SSL key file (valid only if SSL enabled)
+# kombu_ssl_keyfile =
+# SSL cert file (valid only if SSL enabled)
+# kombu_ssl_certfile =
+# SSL certification authority file (valid only if SSL enabled)
+# kombu_ssl_ca_certs =
+# IP address of the RabbitMQ installation
+# rabbit_host = localhost
+# Password of the RabbitMQ server
+# rabbit_password = guest
+# Port where RabbitMQ server is running/listening
+# rabbit_port = 5672
+# RabbitMQ single or HA cluster (host:port pairs i.e: host1:5672, host2:5672)
+# rabbit_hosts is defaulted to '$rabbit_host:$rabbit_port'
+# rabbit_hosts = localhost:5672
+# User ID used for RabbitMQ connections
+# rabbit_userid = guest
+# Location of a virtual RabbitMQ installation.
+# rabbit_virtual_host = /
+# Maximum retries with trying to connect to RabbitMQ
+# (the default of 0 implies an infinite retry count)
+# rabbit_max_retries = 0
+# RabbitMQ connection retry interval
+# rabbit_retry_interval = 1
+# Use HA queues in RabbitMQ (x-ha-policy: all). You need to
+# wipe RabbitMQ database when changing this option. (boolean value)
+# rabbit_ha_queues = false
+
+# QPID
+# ###rpc_backend = neutron.openstack.common.rpc.impl_qpid
+# Qpid broker hostname
+# qpid_hostname = localhost
+# Qpid broker port
+# qpid_port = 5672
+# Qpid single or HA cluster (host:port pairs i.e: host1:5672, host2:5672)
+# qpid_hosts is defaulted to '$qpid_hostname:$qpid_port'
+# qpid_hosts = localhost:5672
+# Username for qpid connection
+# qpid_username = ''
+# Password for qpid connection
+# qpid_password = ''
+# Space separated list of SASL mechanisms to use for auth
+# qpid_sasl_mechanisms = ''
+# Seconds between connection keepalive heartbeats
+# qpid_heartbeat = 60
+# Transport to use, either 'tcp' or 'ssl'
+# qpid_protocol = tcp
+# Disable Nagle algorithm
+# qpid_tcp_nodelay = True
+
+# ZMQ
+# rpc_backend=neutron.openstack.common.rpc.impl_zmq
+# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
+# The "host" option should point or resolve to this address.
+# rpc_zmq_bind_address = *
+
+# ============ Notification System Options =====================
+
+# Notifications can be sent when network/subnet/port are created, updated or deleted.
+# There are three methods of sending notifications: logging (via the
+# log_file directive), rpc (via a message queue) and
+# noop (no notifications sent, the default)
+
+# Notification_driver can be defined multiple times
+# Do nothing driver
+# notification_driver = neutron.openstack.common.notifier.no_op_notifier
+# Logging driver
+# notification_driver = neutron.openstack.common.notifier.log_notifier
+# RPC driver.
+{%- if server.notification %}
+notification_driver = neutron.openstack.common.notifier.rpc_notifier
+{%- endif %}
+#bind_port = 9697
+auth_strategy = keystone
+allow_overlapping_ips = True
+
+#rabbit_host = 10.0.102.35
+service_plugins = neutron_plugin_contrail.plugins.opencontrail.loadbalancer.plugin.LoadBalancerPlugin
+log_format = %(asctime)s.%(msecs)d %(levelname)8s [%(name)s] %(message)s
+#rabbit_port = 5673
+rabbit_retry_interval = 1
+rabbit_retry_backoff = 2
+rabbit_max_retries = 0
+#rabbit_ha_queues = True
+rpc_cast_timeout = 30
+rpc_conn_pool_size = 40
+rpc_response_timeout = 60
+rpc_thread_pool_size = 70
+
+rabbit_host = {{ neutron.message_queue.host }}
+rabbit_port = {{ neutron.message_queue.port }}
+
+rabbit_userid = {{ neutron.message_queue.user }}
+rabbit_password = {{ neutron.message_queue.password }}
+rabbit_virtual_host = {{ neutron.message_queue.virtual_host }}
+
+
+# default_notification_level is used to form actual topic name(s) or to set logging level
+# default_notification_level = INFO
+
+# default_publisher_id is a part of the notification payload
+# host = myhost.com
+# default_publisher_id = $host
+
+# Defined in rpc_notifier, can be comma separated values.
+# The actual topic names will be %s.%(default_notification_level)s
+# notification_topics = notifications
+
+# Default maximum number of items returned in a single response,
+# value == infinite and value < 0 means no max limit, and value must
+# be greater than 0. If the number of items requested is greater than
+# pagination_max_limit, server will just return pagination_max_limit
+# of number of items.
+# pagination_max_limit = -1
+
+# Maximum number of DNS nameservers per subnet
+# max_dns_nameservers = 5
+
+# Maximum number of host routes per subnet
+# max_subnet_host_routes = 20
+
+# Maximum number of fixed ips per port
+# max_fixed_ips_per_port = 5
+
+# =========== items for agent management extension =============
+# Seconds to regard the agent as down; should be at least twice
+# report_interval, to be sure the agent is down for good
+# agent_down_time = 75
+# ===========  end of items for agent management extension =====
+
+# =========== items for agent scheduler extension =============
+# Driver to use for scheduling network to DHCP agent
+# network_scheduler_driver = neutron.scheduler.dhcp_agent_scheduler.ChanceScheduler
+# Driver to use for scheduling router to a default L3 agent
+# router_scheduler_driver = neutron.scheduler.l3_agent_scheduler.ChanceScheduler
+# Driver to use for scheduling a loadbalancer pool to an lbaas agent
+# loadbalancer_pool_scheduler_driver = neutron.services.loadbalancer.agent_scheduler.ChanceScheduler
+
+# Allow auto scheduling networks to DHCP agent. It will schedule non-hosted
+# networks to first DHCP agent which sends get_active_networks message to
+# neutron server
+# network_auto_schedule = True
+
+# Allow auto scheduling routers to L3 agent. It will schedule non-hosted
+# routers to first L3 agent which sends sync_routers message to neutron server
+# router_auto_schedule = True
+
+# Number of DHCP agents scheduled to host a network. This enables redundant
+# DHCP agents for configured networks.
+# dhcp_agents_per_network = 1
+
+# ===========  end of items for agent scheduler extension =====
+
+# =========== WSGI parameters related to the API server ==============
+# Number of separate worker processes to spawn.  The default, 0, runs the
+# worker thread in the current process.  Greater than 0 launches that number of
+# child processes as workers.  The parent process manages them.
+# api_workers = 0
+
+# Number of separate RPC worker processes to spawn.  The default, 0, runs the
+# worker thread in the current process.  Greater than 0 launches that number of
+# child processes as RPC workers.  The parent process manages them.
+# This feature is experimental until issues are addressed and testing has been
+# enabled for various plugins for compatibility.
+# rpc_workers = 0
+
+# Sets the value of TCP_KEEPIDLE in seconds to use for each server socket when
+# starting API server. Not supported on OS X.
+# tcp_keepidle = 600
+
+# Number of seconds to keep retrying to listen
+# retry_until_window = 30
+
+# Number of backlog requests to configure the socket with.
+# backlog = 4096
+
+# Max header line to accommodate large tokens
+# max_header_line = 16384
+
+# Enable SSL on the API server
+# use_ssl = False
+
+# Certificate file to use when starting API server securely
+# ssl_cert_file = /path/to/certfile
+
+# Private key file to use when starting API server securely
+# ssl_key_file = /path/to/keyfile
+
+# CA certificate file to use when starting API server securely to
+# verify connecting clients. This is an optional parameter only required if
+# API clients need to authenticate to the API server using SSL certificates
+# signed by a trusted CA
+# ssl_ca_file = /path/to/cafile
+# ======== end of WSGI parameters related to the API server ==========
+
+
+# ======== neutron nova interactions ==========
+# Send notification to nova when port status is active.
+# notify_nova_on_port_status_changes = True
+
+# Send notifications to nova when port data (fixed_ips/floatingips) change
+# so nova can update it's cache.
+# notify_nova_on_port_data_changes = True
+
+# URL for connection to nova (Only supports one nova region currently).
+# nova_url = http://127.0.0.1:8774
+
+# Name of nova region to use. Useful if keystone manages more than one region
+# nova_region_name =
+
+# Username for connection to nova in admin context
+# nova_admin_username =
+
+# The uuid of the admin nova tenant
+# nova_admin_tenant_id =
+
+# Password for connection to nova in admin context.
+# nova_admin_password =
+
+# Authorization URL for connection to nova in admin context.
+# nova_admin_auth_url =
+
+# Number of seconds between sending events to nova if there are any events to send
+# send_events_interval = 2
+
+# ======== end of neutron nova interactions ==========
+
+[quotas]
+quota_driver = neutron_plugin_contrail.plugins.opencontrail.quota.driver.QuotaDriver
+# Default driver to use for quota checks
+# quota_driver = neutron.db.quota_db.DbQuotaDriver
+
+# Resource name(s) that are supported in quota features
+# quota_items = network,subnet,port
+
+# Default number of resource allowed per tenant. A negative value means
+# unlimited.
+# default_quota = -1
+
+# Number of networks allowed per tenant. A negative value means unlimited.
+# quota_network = 10
+
+# Number of subnets allowed per tenant. A negative value means unlimited.
+# quota_subnet = 10
+
+# Number of ports allowed per tenant. A negative value means unlimited.
+# quota_port = 50
+
+# Number of security groups allowed per tenant. A negative value means
+# unlimited.
+# quota_security_group = 10
+
+# Number of security group rules allowed per tenant. A negative value means
+# unlimited.
+# quota_security_group_rule = 100
+
+# Number of vips allowed per tenant. A negative value means unlimited.
+# quota_vip = 10
+
+# Number of pools allowed per tenant. A negative value means unlimited.
+# quota_pool = 10
+
+# Number of pool members allowed per tenant. A negative value means unlimited.
+# The default is unlimited because a member is not a real resource consumer
+# on Openstack. However, on back-end, a member is a resource consumer
+# and that is the reason why quota is possible.
+# quota_member = -1
+
+# Number of health monitors allowed per tenant. A negative value means
+# unlimited.
+# The default is unlimited because a health monitor is not a real resource
+# consumer on Openstack. However, on back-end, a member is a resource consumer
+# and that is the reason why quota is possible.
+# quota_health_monitors = -1
+
+# Number of routers allowed per tenant. A negative value means unlimited.
+# quota_router = 10
+
+# Number of floating IPs allowed per tenant. A negative value means unlimited.
+# quota_floatingip = 50
+
+[agent]
+# Use "sudo neutron-rootwrap /etc/neutron/rootwrap.conf" to use the real
+# root filter facility.
+# Change to "sudo" to skip the filtering and just run the comand directly
+root_helper = sudo /usr/bin/neutron-rootwrap /etc/neutron/rootwrap.conf
+
+# =========== items for agent management extension =============
+# seconds between nodes reporting state to server; should be less than
+# agent_down_time, best if it is half or less than agent_down_time
+# report_interval = 30
+
+# ===========  end of items for agent management extension =====
+
+[keystone_authtoken]
+#auth_host = 10.0.102.35
+#auth_port = 35357
+#auth_protocol = http
+#admin_tenant_name = service
+#admin_user = neutron
+#admin_password = ad1b8c6b91b59f556ed2
+signing_dir = $state_path/keystone-signing
+#admin_token = ad1b8c6b91b59f556ed2
+
+auth_host = {{ neutron.identity.host }}
+auth_port = {{ neutron.identity.port }}
+auth_protocol = http
+admin_tenant_name = {{ neutron.identity.tenant }}
+admin_user = {{ neutron.identity.user }}
+admin_password = {{ neutron.identity.password }}
+auth_uri=http://{{ neutron.identity.host }}:5000/
+
+[database]
+# This line MUST be changed to actually run the plugin.
+# Example:
+# connection = mysql://root:pass@127.0.0.1:3306/neutron
+# Replace 127.0.0.1 above with the IP address of the database used by the
+# main neutron server. (Leave it as is if the database runs on this host.)
+connection = sqlite:////var/lib/neutron/neutron.sqlite
+
+# The SQLAlchemy connection string used to connect to the slave database
+# slave_connection =
+
+# Database reconnection retry times - in event connectivity is lost
+# set to -1 implies an infinite retry count
+# max_retries = 10
+
+# Database reconnection interval in seconds - if the initial connection to the
+# database fails
+# retry_interval = 10
+
+# Minimum number of SQL connections to keep open in a pool
+# min_pool_size = 1
+
+# Maximum number of SQL connections to keep open in a pool
+# max_pool_size = 10
+
+# Timeout in seconds before idle sql connections are reaped
+# idle_timeout = 3600
+
+# If set, use this value for max_overflow with sqlalchemy
+# max_overflow = 20
+
+# Verbosity of SQL debugging information. 0=None, 100=Everything
+# connection_debug = 0
+
+# Add python stack traces to SQL as comment strings
+# connection_trace = False
+
+# If set, use this value for pool_timeout with sqlalchemy
+# pool_timeout = 10
+
+[service_providers]
+service_provider = LOADBALANCER:Opencontrail:neutron_plugin_contrail.plugins.opencontrail.loadbalancer.driver.OpencontrailLoadbalancerDriver:default
+# Specify service providers (drivers) for advanced services like loadbalancer, VPN, Firewall.
+# Must be in form:
+# service_provider=<service_type>:<name>:<driver>[:default]
+# List of allowed service types includes LOADBALANCER, FIREWALL, VPN
+# Combination of <service type> and <name> must be unique; <driver> must also be unique
+# This is multiline option, example for default provider:
+# service_provider=LOADBALANCER:name:lbaas_plugin_driver_path:default
+# example of non-default provider:
+# service_provider=FIREWALL:name2:firewall_driver_path
+# --- Reference implementations ---
+# In order to activate Radware's lbaas driver you need to uncomment the next line.
+# If you want to keep the HA Proxy as the default lbaas driver, remove the attribute default from the line below.
+# Otherwise comment the HA Proxy line
+# service_provider = LOADBALANCER:Radware:neutron.services.loadbalancer.drivers.radware.driver.LoadBalancerDriver:default
+# uncomment the following line to make the 'netscaler' LBaaS provider available.
+# service_provider=LOADBALANCER:NetScaler:neutron.services.loadbalancer.drivers.netscaler.netscaler_driver.NetScalerPluginDriver
+# Uncomment the following line (and comment out the OpenSwan VPN line) to enable Cisco's VPN driver.
+# service_provider=VPN:cisco:neutron.services.vpn.service_drivers.cisco_ipsec.CiscoCsrIPsecVPNDriver:default
+# Uncomment the line below to use Embrane heleos as Load Balancer service provider.
+# service_provider=LOADBALANCER:Embrane:neutron.services.loadbalancer.drivers.embrane.driver.EmbraneLbaas:default
+
+
+[QUOTAS]
+quota_network = -1
+quota_subnet = -1
+quota_port = -1
+
+[NOVA]
+vif_types = vrouter
diff --git a/neutron/files/juno/neutron-server.conf.contrail.RedHat b/neutron/files/juno/neutron-server.conf.contrail.RedHat
new file mode 120000
index 0000000..bb7b8c7
--- /dev/null
+++ b/neutron/files/juno/neutron-server.conf.contrail.RedHat
@@ -0,0 +1 @@
+neutron-server.conf.contrail.Debian
\ No newline at end of file
diff --git a/neutron/files/kilo/ContrailPlugin.ini b/neutron/files/kilo/ContrailPlugin.ini
new file mode 100644
index 0000000..1fed366
--- /dev/null
+++ b/neutron/files/kilo/ContrailPlugin.ini
@@ -0,0 +1,15 @@
+{% from "neutron/map.jinja" import server with context %}
+{% from "opencontrail/map.jinja" import config with context %}
+[APISERVER]
+api_server_ip = {{ config.discovery.host }}
+api_server_port = 8082
+multi_tenancy = True
+contrail_extensions = ipam:neutron_plugin_contrail.plugins.opencontrail.contrail_plugin_ipam.NeutronPluginContrailIpam,policy:neutron_plugin_contrail.plugins.opencontrail.contrail_plugin_policy.NeutronPluginContrailPolicy,route-table:neutron_plugin_contrail.plugins.opencontrail.contrail_plugin_vpc.NeutronPluginContrailVpc,contrail:None
+
+[KEYSTONE]
+auth_url = http://{{ config.identity.host }}:35357/v2.0
+admin_token = {{ config.identity.token }}
+admin_user={{ config.identity.user }}
+admin_password={{ config.identity.password }}
+admin_tenant_name={{ config.identity.tenant }}
+
diff --git a/neutron/files/kilo/api-paste.ini.Debian b/neutron/files/kilo/api-paste.ini.Debian
new file mode 100644
index 0000000..54f9daa
--- /dev/null
+++ b/neutron/files/kilo/api-paste.ini.Debian
@@ -0,0 +1,45 @@
+{%- if pillar.neutron.server is defined %}
+{%- set neutron = pillar.neutron.server %}
+{%- elif pillar.neutron.switch is defined %}
+{%- set neutron = pillar.neutron.switch %}
+{%- elif pillar.neutron.bridge is defined %}
+{%- set neutron = pillar.neutron.bridge %}
+{%- endif %}
+[composite:neutron]
+use = egg:Paste#urlmap
+/: neutronversions
+/v2.0: neutronapi_v2_0
+
+[composite:neutronapi_v2_0]
+use = call:neutron.auth:pipeline_factory
+noauth = request_id catch_errors extensions neutronapiapp_v2_0
+keystone = request_id catch_errors authtoken keystonecontext extensions neutronapiapp_v2_0
+
+[filter:request_id]
+paste.filter_factory = oslo.middleware:RequestId.factory
+
+[filter:catch_errors]
+paste.filter_factory = oslo.middleware:CatchErrors.factory
+
+[filter:keystonecontext]
+paste.filter_factory = neutron.auth:NeutronKeystoneContext.factory
+
+[filter:authtoken]
+paste.filter_factory = keystonemiddleware.auth_token:filter_factory
+auth_port={{ neutron.identity.port }}
+auth_protocol=http
+auth_url=http://{{ neutron.identity.host }}:{{ neutron.identity.port }}/v2.0
+auth_host={{ neutron.identity.host }}
+admin_tenant_name = {{ neutron.identity.tenant }}
+admin_user = {{ neutron.identity.user }}
+admin_password = {{ neutron.identity.password }}
+signing_dir = /var/lib/neutron/keystone-signing
+
+[filter:extensions]
+paste.filter_factory = neutron.api.extensions:plugin_aware_extension_middleware_factory
+
+[app:neutronversions]
+paste.app_factory = neutron.api.versions:Versions.factory
+
+[app:neutronapiapp_v2_0]
+paste.app_factory = neutron.api.v2.router:APIRouter.factory
diff --git a/neutron/files/kilo/api-paste.ini.RedHat b/neutron/files/kilo/api-paste.ini.RedHat
new file mode 120000
index 0000000..08fd76a
--- /dev/null
+++ b/neutron/files/kilo/api-paste.ini.RedHat
@@ -0,0 +1 @@
+api-paste.ini.Debian
\ No newline at end of file
diff --git a/neutron/files/kilo/neutron-server b/neutron/files/kilo/neutron-server
new file mode 100644
index 0000000..9b06503
--- /dev/null
+++ b/neutron/files/kilo/neutron-server
@@ -0,0 +1,16 @@
+# Generated by Salt.
+{%- from "neutron/map.jinja" import server with context %}
+
+# defaults for neutron-server
+
+# path to config file corresponding to the core_plugin specified in
+# neutron.conf
+#NEUTRON_PLUGIN_CONFIG="/etc/neutron/plugins/openvswitch/ovs_neutron_plugin.ini"
+
+{%- if server.plugin == "ml2" %}
+NEUTRON_PLUGIN_CONFIG="/etc/neutron/plugins/ml2/ml2_conf.ini"
+{%- endif %}
+
+{%- if server.plugin == "contrail" %}
+NEUTRON_PLUGIN_CONFIG="/etc/neutron/plugins/opencontrail/ContrailPlugin.ini"
+{%- endif %}
\ No newline at end of file
diff --git a/neutron/files/kilo/neutron-server.conf.contrail.Debian b/neutron/files/kilo/neutron-server.conf.contrail.Debian
new file mode 100644
index 0000000..e43c49a
--- /dev/null
+++ b/neutron/files/kilo/neutron-server.conf.contrail.Debian
@@ -0,0 +1,1025 @@
+{%- set neutron = pillar.neutron.server %}
+{%- from "neutron/map.jinja" import server with context %}
+[DEFAULT]
+# Print more verbose output (set logging level to INFO instead of default WARNING level).
+# verbose = False
+verbose = true
+
+# =========Start Global Config Option for Distributed L3 Router===============
+# Setting the "router_distributed" flag to "True" will default to the creation
+# of distributed tenant routers. The admin can override this flag by specifying
+# the type of the router on the create request (admin-only attribute). Default
+# value is "False" to support legacy mode (centralized) routers.
+#
+# router_distributed = False
+#
+# ===========End Global Config Option for Distributed L3 Router===============
+
+# Print debugging output (set logging level to DEBUG instead of default WARNING level).
+# debug = False
+
+# Where to store Neutron state files.  This directory must be writable by the
+# user executing the agent.
+# state_path = /var/lib/neutron
+state_path = /var/lib/neutron
+
+# log_format = %(asctime)s %(levelname)8s [%(name)s] %(message)s
+# log_date_format = %Y-%m-%d %H:%M:%S
+
+# use_syslog                           -> syslog
+# log_file and log_dir                 -> log_dir/log_file
+# (not log_file) and log_dir           -> log_dir/{binary_name}.log
+# use_stderr                           -> stderr
+# (not user_stderr) and (not log_file) -> stdout
+# publish_errors                       -> notification system
+
+# use_syslog = False
+# syslog_log_facility = LOG_USER
+
+# use_stderr = True
+# log_file =
+# log_dir =
+
+# publish_errors = False
+
+# Address to bind the API server to
+bind_host = {{ neutron.bind.address }}
+
+# Port the bind the API server to
+# bind_port = 9696
+bind_port = {{ neutron.bind.port }}
+
+# Path to the extensions.  Note that this can be a colon-separated list of
+# paths.  For example:
+# api_extensions_path = extensions:/path/to/more/extensions:/even/more/extensions
+# The __path__ of neutron.extensions is appended to this, so if your
+# extensions are in there you don't need to specify them here
+# api_extensions_path =
+
+# (StrOpt) Neutron core plugin entrypoint to be loaded from the
+# neutron.core_plugins namespace. See setup.cfg for the entrypoint names of the
+# plugins included in the neutron source distribution. For compatibility with
+# previous versions, the class name of a plugin can be specified instead of its
+# entrypoint name.
+#
+#core_plugin = ml2
+# Example: core_plugin = ml2
+core_plugin = neutron_plugin_contrail.plugins.opencontrail.contrail_plugin.NeutronPluginContrailCoreV2
+api_extensions_path = extensions:/usr/lib/python2.7/dist-packages/neutron_plugin_contrail/extensions
+# (ListOpt) List of service plugin entrypoints to be loaded from the
+# neutron.service_plugins namespace. See setup.cfg for the entrypoint names of
+# the plugins included in the neutron source distribution. For compatibility
+# with previous versions, the class name of a plugin can be specified instead
+# of its entrypoint name.
+#
+# service_plugins =
+# Example: service_plugins = router,firewall,lbaas,vpnaas,metering
+service_plugins = neutron_plugin_contrail.plugins.opencontrail.loadbalancer.plugin.LoadBalancerPlugin
+
+# Paste configuration file
+# api_paste_config = api-paste.ini
+
+# (StrOpt) Hostname to be used by the neutron server, agents and services
+# running on this machine. All the agents and services running on this machine
+# must use the same host value.
+# The default value is hostname of the machine.
+#
+# host =
+
+# The strategy to be used for auth.
+# Supported values are 'keystone'(default), 'noauth'.
+# auth_strategy = keystone
+auth_strategy = keystone
+
+# Base MAC address. The first 3 octets will remain unchanged. If the
+# 4h octet is not 00, it will also be used. The others will be
+# randomly generated.
+# 3 octet
+# base_mac = fa:16:3e:00:00:00
+# 4 octet
+# base_mac = fa:16:3e:4f:00:00
+
+# DVR Base MAC address. The first 3 octets will remain unchanged. If the
+# 4th octet is not 00, it will also be used.  The others will be randomly
+# generated. The 'dvr_base_mac' *must* be different from 'base_mac' to
+# avoid mixing them up with MAC's allocated for tenant ports.
+# A 4 octet example would be dvr_base_mac = fa:16:3f:4f:00:00
+# The default is 3 octet
+# dvr_base_mac = fa:16:3f:00:00:00
+
+# Maximum amount of retries to generate a unique MAC address
+# mac_generation_retries = 16
+
+# DHCP Lease duration (in seconds).  Use -1 to
+# tell dnsmasq to use infinite lease times.
+# dhcp_lease_duration = 86400
+
+# Allow sending resource operation notification to DHCP agent
+# dhcp_agent_notification = True
+
+# Enable or disable bulk create/update/delete operations
+# allow_bulk = True
+# Enable or disable pagination
+# allow_pagination = False
+# Enable or disable sorting
+# allow_sorting = False
+# Enable or disable overlapping IPs for subnets
+# Attention: the following parameter MUST be set to False if Neutron is
+# being used in conjunction with nova security groups
+# allow_overlapping_ips = False
+allow_overlapping_ips = True
+# Ensure that configured gateway is on subnet. For IPv6, validate only if
+# gateway is not a link local address. Deprecated, to be removed during the
+# K release, at which point the check will be mandatory.
+# force_gateway_on_subnet = True
+
+# Default maximum number of items returned in a single response,
+# value == infinite and value < 0 means no max limit, and value must
+# be greater than 0. If the number of items requested is greater than
+# pagination_max_limit, server will just return pagination_max_limit
+# of number of items.
+# pagination_max_limit = -1
+
+# Maximum number of DNS nameservers per subnet
+# max_dns_nameservers = 5
+
+# Maximum number of host routes per subnet
+# max_subnet_host_routes = 20
+
+# Maximum number of fixed ips per port
+# max_fixed_ips_per_port = 5
+
+# Maximum number of routes per router
+# max_routes = 30
+
+# Default Subnet Pool to be used for IPv4 subnet-allocation.
+# Specifies by UUID the pool to be used in case of subnet-create being called
+# without a subnet-pool ID.  The default of None means that no pool will be
+# used unless passed explicitly to subnet create.  If no pool is used, then a
+# CIDR must be passed to create a subnet and that subnet will not be allocated
+# from any pool; it will be considered part of the tenant's private address
+# space.
+# default_ipv4_subnet_pool =
+
+# Default Subnet Pool to be used for IPv6 subnet-allocation.
+# Specifies by UUID the pool to be used in case of subnet-create being
+# called without a subnet-pool ID.  Set to "prefix_delegation"
+# to enable IPv6 Prefix Delegation in a PD-capable environment.
+# See the description for default_ipv4_subnet_pool for more information.
+# default_ipv6_subnet_pool =
+
+# =========== items for MTU selection and advertisement =============
+# Advertise MTU.  If True, effort is made to advertise MTU
+# settings to VMs via network methods (ie. DHCP and RA MTU options)
+# when the network's preferred MTU is known.
+# advertise_mtu = False
+# ======== end of items for MTU selection and advertisement =========
+
+# =========== items for agent management extension =============
+# Seconds to regard the agent as down; should be at least twice
+# report_interval, to be sure the agent is down for good
+# agent_down_time = 75
+# ===========  end of items for agent management extension =====
+
+# =========== items for agent scheduler extension =============
+# Driver to use for scheduling network to DHCP agent
+# network_scheduler_driver = neutron.scheduler.dhcp_agent_scheduler.ChanceScheduler
+# Driver to use for scheduling router to a default L3 agent
+# router_scheduler_driver = neutron.scheduler.l3_agent_scheduler.ChanceScheduler
+# Driver to use for scheduling a loadbalancer pool to an lbaas agent
+# loadbalancer_pool_scheduler_driver = neutron.services.loadbalancer.agent_scheduler.ChanceScheduler
+
+# (StrOpt) Representing the resource type whose load is being reported by
+# the agent.
+# This can be 'networks','subnets' or 'ports'. When specified (Default is networks),
+# the server will extract particular load sent as part of its agent configuration object
+# from the agent report state, which is the number of resources being consumed, at
+# every report_interval.
+# dhcp_load_type can be used in combination with network_scheduler_driver =
+# neutron.scheduler.dhcp_agent_scheduler.WeightScheduler
+# When the network_scheduler_driver is WeightScheduler, dhcp_load_type can
+# be configured to represent the choice for the resource being balanced.
+# Example: dhcp_load_type = networks
+# Values:
+#   networks - number of networks hosted on the agent
+#   subnets -  number of subnets associated with the networks hosted on the agent
+#   ports   -  number of ports associated with the networks hosted on the agent
+# dhcp_load_type = networks
+
+# Allow auto scheduling networks to DHCP agent. It will schedule non-hosted
+# networks to first DHCP agent which sends get_active_networks message to
+# neutron server
+# network_auto_schedule = True
+
+# Allow auto scheduling routers to L3 agent. It will schedule non-hosted
+# routers to first L3 agent which sends sync_routers message to neutron server
+# router_auto_schedule = True
+
+# Allow automatic rescheduling of routers from dead L3 agents with
+# admin_state_up set to True to alive agents.
+# allow_automatic_l3agent_failover = False
+
+# Allow automatic removal of networks from dead DHCP agents with
+# admin_state_up set to True.
+# Networks could then be rescheduled if network_auto_schedule is True
+# allow_automatic_dhcp_failover = True
+
+# Number of DHCP agents scheduled to host a network. This enables redundant
+# DHCP agents for configured networks.
+# dhcp_agents_per_network = 1
+
+# Enable services on agents with admin_state_up False.
+# If this option is False, when admin_state_up of an agent is turned to
+# False, services on it will be disabled. If this option is True, services
+# on agents with admin_state_up False keep available and manual scheduling
+# to such agents is available. Agents with admin_state_up False are not
+# selected for automatic scheduling regardless of this option.
+# enable_services_on_agents_with_admin_state_down = False
+
+# ===========  end of items for agent scheduler extension =====
+
+# =========== items for l3 extension ==============
+# Enable high availability for virtual routers.
+# l3_ha = False
+#
+# Maximum number of l3 agents which a HA router will be scheduled on. If it
+# is set to 0 the router will be scheduled on every agent.
+# max_l3_agents_per_router = 3
+#
+# Minimum number of l3 agents which a HA router will be scheduled on. The
+# default value is 2.
+# min_l3_agents_per_router = 2
+#
+# CIDR of the administrative network if HA mode is enabled
+# l3_ha_net_cidr = 169.254.192.0/18
+# =========== end of items for l3 extension =======
+
+# =========== items for metadata proxy configuration ==============
+# User (uid or name) running metadata proxy after its initialization
+# (if empty: agent effective user)
+# metadata_proxy_user =
+
+# Group (gid or name) running metadata proxy after its initialization
+# (if empty: agent effective group)
+# metadata_proxy_group =
+
+# Enable/Disable log watch by metadata proxy, it should be disabled when
+# metadata_proxy_user/group is not allowed to read/write its log file and
+# 'copytruncate' logrotate option must be used if logrotate is enabled on
+# metadata proxy log files. Option default value is deduced from
+# metadata_proxy_user: watch log is enabled if metadata_proxy_user is agent
+# effective user id/name.
+# metadata_proxy_watch_log =
+
+# Location of Metadata Proxy UNIX domain socket
+# metadata_proxy_socket = $state_path/metadata_proxy
+# =========== end of items for metadata proxy configuration ==============
+
+# ========== items for VLAN trunking networks ==========
+# Setting this flag to True will allow plugins that support it to
+# create VLAN transparent networks. This flag has no effect for
+# plugins that do not support VLAN transparent networks.
+# vlan_transparent = False
+# ========== end of items for VLAN trunking networks ==========
+
+# =========== WSGI parameters related to the API server ==============
+# Number of separate worker processes to spawn.  The default, 0, runs the
+# worker thread in the current process.  Greater than 0 launches that number of
+# child processes as workers.  The parent process manages them.
+# api_workers = 0
+
+# Number of separate RPC worker processes to spawn.  The default, 0, runs the
+# worker thread in the current process.  Greater than 0 launches that number of
+# child processes as RPC workers.  The parent process manages them.
+# This feature is experimental until issues are addressed and testing has been
+# enabled for various plugins for compatibility.
+# rpc_workers = 0
+
+# Timeout for client connections socket operations. If an
+# incoming connection is idle for this number of seconds it
+# will be closed. A value of '0' means wait forever. (integer
+# value)
+# client_socket_timeout = 900
+
+# wsgi keepalive option. Determines if connections are allowed to be held open
+# by clients after a request is fulfilled. A value of False will ensure that
+# the socket connection will be explicitly closed once a response has been
+# sent to the client.
+# wsgi_keep_alive = True
+
+# Sets the value of TCP_KEEPIDLE in seconds to use for each server socket when
+# starting API server. Not supported on OS X.
+# tcp_keepidle = 600
+
+# Number of seconds to keep retrying to listen
+# retry_until_window = 30
+
+# Number of backlog requests to configure the socket with.
+# backlog = 4096
+
+# Max header line to accommodate large tokens
+# max_header_line = 16384
+
+# Enable SSL on the API server
+# use_ssl = False
+
+# Certificate file to use when starting API server securely
+# ssl_cert_file = /path/to/certfile
+
+# Private key file to use when starting API server securely
+# ssl_key_file = /path/to/keyfile
+
+# CA certificate file to use when starting API server securely to
+# verify connecting clients. This is an optional parameter only required if
+# API clients need to authenticate to the API server using SSL certificates
+# signed by a trusted CA
+# ssl_ca_file = /path/to/cafile
+# ======== end of WSGI parameters related to the API server ==========
+
+# ======== neutron nova interactions ==========
+# Send notification to nova when port status is active.
+# notify_nova_on_port_status_changes = True
+notify_nova_on_port_status_changes = True
+
+# Send notifications to nova when port data (fixed_ips/floatingips) change
+# so nova can update it's cache.
+# notify_nova_on_port_data_changes = True
+notify_nova_on_port_data_changes = True
+
+# URL for connection to nova (Only supports one nova region currently).
+# nova_url = http://127.0.0.1:8774/v2
+nova_url = http://{{ neutron.compute.host }}:8774/v2
+
+# Name of nova region to use. Useful if keystone manages more than one region
+# nova_region_name =
+nova_region_name = {{ neutron.compute.region }}
+
+# Username for connection to nova in admin context
+# nova_admin_username =
+nova_admin_username = {{ neutron.compute.user }}
+
+# The uuid of the admin nova tenant
+# nova_admin_tenant_id =
+
+# The name of the admin nova tenant. If the uuid of the admin nova tenant
+# is set, this is optional.  Useful for cases where the uuid of the admin
+# nova tenant is not available when configuration is being done.
+# nova_admin_tenant_name =
+nova_admin_tenant_name = {{ neutron.compute.tenant }}
+
+# Password for connection to nova in admin context.
+# nova_admin_password =
+nova_admin_password = {{ neutron.compute.password }}
+
+# Authorization URL for connection to nova in admin context.
+# nova_admin_auth_url =
+nova_admin_auth_url = http://{{ neutron.identity.host }}:35357
+
+# CA file for novaclient to verify server certificates
+# nova_ca_certificates_file =
+
+# Boolean to control ignoring SSL errors on the nova url
+# nova_api_insecure = False
+
+# Number of seconds between sending events to nova if there are any events to send
+# send_events_interval = 2
+send_events_interval = 2
+
+# ======== end of neutron nova interactions ==========
+
+#
+# Options defined in oslo.messaging
+#
+
+# Use durable queues in amqp. (boolean value)
+# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
+# amqp_durable_queues=false
+
+# Auto-delete queues in amqp. (boolean value)
+# amqp_auto_delete=false
+
+# Size of RPC connection pool. (integer value)
+# rpc_conn_pool_size=30
+
+# Qpid broker hostname. (string value)
+# qpid_hostname=localhost
+
+# Qpid broker port. (integer value)
+# qpid_port=5672
+
+# Qpid HA cluster host:port pairs. (list value)
+# qpid_hosts=$qpid_hostname:$qpid_port
+
+# Username for Qpid connection. (string value)
+# qpid_username=
+
+# Password for Qpid connection. (string value)
+# qpid_password=
+
+# Space separated list of SASL mechanisms to use for auth.
+# (string value)
+# qpid_sasl_mechanisms=
+
+# Seconds between connection keepalive heartbeats. (integer
+# value)
+# qpid_heartbeat=60
+
+# Transport to use, either 'tcp' or 'ssl'. (string value)
+# qpid_protocol=tcp
+
+# Whether to disable the Nagle algorithm. (boolean value)
+# qpid_tcp_nodelay=true
+
+# The qpid topology version to use.  Version 1 is what was
+# originally used by impl_qpid.  Version 2 includes some
+# backwards-incompatible changes that allow broker federation
+# to work.  Users should update to version 2 when they are
+# able to take everything down, as it requires a clean break.
+# (integer value)
+# qpid_topology_version=1
+
+# SSL version to use (valid only if SSL enabled). valid values
+# are TLSv1, SSLv23 and SSLv3. SSLv2 may be available on some
+# distributions. (string value)
+# kombu_ssl_version=
+
+# SSL key file (valid only if SSL enabled). (string value)
+# kombu_ssl_keyfile=
+
+# SSL cert file (valid only if SSL enabled). (string value)
+# kombu_ssl_certfile=
+
+# SSL certification authority file (valid only if SSL
+# enabled). (string value)
+# kombu_ssl_ca_certs=
+
+# How long to wait before reconnecting in response to an AMQP
+# consumer cancel notification. (floating point value)
+# kombu_reconnect_delay=1.0
+
+# The RabbitMQ broker address where a single node is used.
+# (string value)
+# rabbit_host=localhost
+
+# The RabbitMQ broker port where a single node is used.
+# (integer value)
+# rabbit_port=5672
+
+# RabbitMQ HA cluster host:port pairs. (list value)
+# rabbit_hosts=$rabbit_host:$rabbit_port
+
+# Connect over SSL for RabbitMQ. (boolean value)
+# rabbit_use_ssl=false
+
+# The RabbitMQ userid. (string value)
+# rabbit_userid=guest
+
+# The RabbitMQ password. (string value)
+# rabbit_password=guest
+
+# the RabbitMQ login method (string value)
+# rabbit_login_method=AMQPLAIN
+
+# The RabbitMQ virtual host. (string value)
+# rabbit_virtual_host=/
+
+# How frequently to retry connecting with RabbitMQ. (integer
+# value)
+# rabbit_retry_interval=1
+
+# How long to backoff for between retries when connecting to
+# RabbitMQ. (integer value)
+# rabbit_retry_backoff=2
+
+# Maximum number of RabbitMQ connection retries. Default is 0
+# (infinite retry count). (integer value)
+# rabbit_max_retries=0
+
+# Use HA queues in RabbitMQ (x-ha-policy: all). If you change
+# this option, you must wipe the RabbitMQ database. (boolean
+# value)
+# rabbit_ha_queues=false
+
+# If passed, use a fake RabbitMQ provider. (boolean value)
+# fake_rabbit=false
+
+# ZeroMQ bind address. Should be a wildcard (*), an ethernet
+# interface, or IP. The "host" option should point or resolve
+# to this address. (string value)
+# rpc_zmq_bind_address=*
+
+# MatchMaker driver. (string value)
+# rpc_zmq_matchmaker=oslo.messaging._drivers.matchmaker.MatchMakerLocalhost
+
+# ZeroMQ receiver listening port. (integer value)
+# rpc_zmq_port=9501
+
+# Number of ZeroMQ contexts, defaults to 1. (integer value)
+# rpc_zmq_contexts=1
+
+# Maximum number of ingress messages to locally buffer per
+# topic. Default is unlimited. (integer value)
+# rpc_zmq_topic_backlog=
+
+# Directory for holding IPC sockets. (string value)
+# rpc_zmq_ipc_dir=/var/run/openstack
+
+# Name of this node. Must be a valid hostname, FQDN, or IP
+# address. Must match "host" option, if running Nova. (string
+# value)
+# rpc_zmq_host=oslo
+
+# Seconds to wait before a cast expires (TTL). Only supported
+# by impl_zmq. (integer value)
+# rpc_cast_timeout=30
+rpc_cast_timeout=30
+
+# Heartbeat frequency. (integer value)
+# matchmaker_heartbeat_freq=300
+
+# Heartbeat time-to-live. (integer value)
+# matchmaker_heartbeat_ttl=600
+
+# Size of RPC greenthread pool. (integer value)
+# rpc_thread_pool_size=64
+rpc_thread_pool_size=70
+
+# Driver or drivers to handle sending notifications. (multi
+# valued)
+# notification_driver=
+{%- if server.notification %}
+notification_driver = neutron.openstack.common.notifier.rpc_notifier
+{%- endif %}
+# AMQP topic used for OpenStack notifications. (list value)
+# Deprecated group/name - [rpc_notifier2]/topics
+# notification_topics=notifications
+
+# Seconds to wait for a response from a call. (integer value)
+# rpc_response_timeout=60
+rpc_response_timeout=60
+
+# A URL representing the messaging driver to use and its full
+# configuration. If not set, we fall back to the rpc_backend
+# option and driver specific configuration. (string value)
+# transport_url=
+
+# The messaging driver to use, defaults to rabbit. Other
+# drivers include qpid and zmq. (string value)
+# rpc_backend=rabbit
+rpc_backend=rabbit
+
+# The default exchange under which topics are scoped. May be
+# overridden by an exchange name specified in the
+# transport_url option. (string value)
+# control_exchange=openstack
+
+
+[matchmaker_redis]
+
+#
+# Options defined in oslo.messaging
+#
+
+# Host to locate redis. (string value)
+# host=127.0.0.1
+
+# Use this port to connect to redis host. (integer value)
+# port=6379
+
+# Password for Redis server (optional). (string value)
+# password=
+
+
+[matchmaker_ring]
+
+#
+# Options defined in oslo.messaging
+#
+
+# Matchmaker ring file (JSON). (string value)
+# Deprecated group/name - [DEFAULT]/matchmaker_ringfile
+# ringfile=/etc/oslo/matchmaker_ring.json
+
+[quotas]
+# Default driver to use for quota checks
+# quota_driver = neutron.db.quota_db.DbQuotaDriver
+quota_driver = neutron_plugin_contrail.plugins.opencontrail.quota.driver.QuotaDriver
+
+# Resource name(s) that are supported in quota features
+# quota_items = network,subnet,port
+
+# Default number of resource allowed per tenant. A negative value means
+# unlimited.
+# default_quota = -1
+
+# Number of networks allowed per tenant. A negative value means unlimited.
+# quota_network = 10
+
+# Number of subnets allowed per tenant. A negative value means unlimited.
+# quota_subnet = 10
+
+# Number of ports allowed per tenant. A negative value means unlimited.
+# quota_port = 50
+
+# Number of security groups allowed per tenant. A negative value means
+# unlimited.
+# quota_security_group = 10
+
+# Number of security group rules allowed per tenant. A negative value means
+# unlimited.
+# quota_security_group_rule = 100
+
+# Number of vips allowed per tenant. A negative value means unlimited.
+# quota_vip = 10
+
+# Number of pools allowed per tenant. A negative value means unlimited.
+# quota_pool = 10
+
+# Number of pool members allowed per tenant. A negative value means unlimited.
+# The default is unlimited because a member is not a real resource consumer
+# on Openstack. However, on back-end, a member is a resource consumer
+# and that is the reason why quota is possible.
+# quota_member = -1
+
+# Number of health monitors allowed per tenant. A negative value means
+# unlimited.
+# The default is unlimited because a health monitor is not a real resource
+# consumer on Openstack. However, on back-end, a member is a resource consumer
+# and that is the reason why quota is possible.
+# quota_health_monitor = -1
+
+# Number of loadbalancers allowed per tenant. A negative value means unlimited.
+# quota_loadbalancer = 10
+
+# Number of listeners allowed per tenant. A negative value means unlimited.
+# quota_listener = -1
+
+# Number of v2 health monitors allowed per tenant. A negative value means
+# unlimited. These health monitors exist under the lbaas v2 API
+# quota_healthmonitor = -1
+
+# Number of routers allowed per tenant. A negative value means unlimited.
+# quota_router = 10
+
+# Number of floating IPs allowed per tenant. A negative value means unlimited.
+# quota_floatingip = 50
+
+# Number of firewalls allowed per tenant. A negative value means unlimited.
+# quota_firewall = 1
+
+# Number of firewall policies allowed per tenant. A negative value means
+# unlimited.
+# quota_firewall_policy = 1
+
+# Number of firewall rules allowed per tenant. A negative value means
+# unlimited.
+# quota_firewall_rule = 100
+
+[agent]
+# Use "sudo neutron-rootwrap /etc/neutron/rootwrap.conf" to use the real
+# root filter facility.
+# Change to "sudo" to skip the filtering and just run the command directly
+root_helper = sudo /usr/bin/neutron-rootwrap /etc/neutron/rootwrap.conf
+
+# Set to true to add comments to generated iptables rules that describe
+# each rule's purpose. (System must support the iptables comments module.)
+# comment_iptables_rules = True
+
+# Root helper daemon application to use when possible.
+# root_helper_daemon =
+
+# Use the root helper when listing the namespaces on a system. This may not
+# be required depending on the security configuration. If the root helper is
+# not required, set this to False for a performance improvement.
+# use_helper_for_ns_read = True
+
+# The interval to check external processes for failure in seconds (0=disabled)
+# check_child_processes_interval = 60
+
+# Action to take when an external process spawned by an agent dies
+# Values:
+#   respawn - Respawns the external process
+#   exit - Exits the agent
+# check_child_processes_action = respawn
+
+# =========== items for agent management extension =============
+# seconds between nodes reporting state to server; should be less than
+# agent_down_time, best if it is half or less than agent_down_time
+# report_interval = 30
+
+# ===========  end of items for agent management extension =====
+
+[keystone_authtoken]
+
+identity_uri = http://{{ neutron.identity.host }}:5000
+auth_host = {{ neutron.identity.host }}
+auth_port = {{ neutron.identity.port }}
+auth_protocol = http
+admin_tenant_name = {{ neutron.identity.tenant }}
+admin_user = {{ neutron.identity.user }}
+admin_password = {{ neutron.identity.password }}
+auth_uri=http://{{ neutron.identity.host }}:5000
+auth_url=http://{{ neutron.identity.host }}:35357
+auth_region={{ neutron.identity.region }}
+
+[database]
+# This line MUST be changed to actually run the plugin.
+# Example:
+connection = sqlite:////var/lib/neutron/neutron.sqlite
+# Replace 127.0.0.1 above with the IP address of the database used by the
+# main neutron server. (Leave it as is if the database runs on this host.)
+# connection = sqlite://
+# NOTE: In deployment the [database] section and its connection attribute may
+# be set in the corresponding core plugin '.ini' file. However, it is suggested
+# to put the [database] section and its connection attribute in this
+# configuration file.
+
+# Database engine for which script will be generated when using offline
+# migration
+# engine =
+
+# The SQLAlchemy connection string used to connect to the slave database
+# slave_connection =
+
+# Database reconnection retry times - in event connectivity is lost
+# set to -1 implies an infinite retry count
+# max_retries = 10
+
+# Database reconnection interval in seconds - if the initial connection to the
+# database fails
+# retry_interval = 10
+
+# Minimum number of SQL connections to keep open in a pool
+# min_pool_size = 1
+
+# Maximum number of SQL connections to keep open in a pool
+# max_pool_size = 10
+
+# Timeout in seconds before idle sql connections are reaped
+# idle_timeout = 3600
+
+# If set, use this value for max_overflow with sqlalchemy
+# max_overflow = 20
+
+# Verbosity of SQL debugging information. 0=None, 100=Everything
+# connection_debug = 0
+
+# Add python stack traces to SQL as comment strings
+# connection_trace = False
+
+# If set, use this value for pool_timeout with sqlalchemy
+# pool_timeout = 10
+
+[nova]
+# Name of the plugin to load
+# auth_plugin =
+
+# Config Section from which to load plugin specific options
+# auth_section =
+
+# PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# cafile =
+
+# PEM encoded client certificate cert file
+# certfile =
+
+# Verify HTTPS connections.
+# insecure = False
+
+# PEM encoded client certificate key file
+# keyfile =
+
+# Name of nova region to use. Useful if keystone manages more than one region.
+# region_name =
+
+# Timeout value for http requests
+# timeout =
+
+[oslo_concurrency]
+
+# Directory to use for lock files. For security, the specified directory should
+# only be writable by the user running the processes that need locking.
+# Defaults to environment variable OSLO_LOCK_PATH. If external locks are used,
+# a lock path must be set.
+lock_path = $state_path/lock
+
+# Enables or disables inter-process locks.
+# disable_process_locking = False
+
+[oslo_policy]
+
+# The JSON file that defines policies.
+# policy_file = policy.json
+
+# Default rule. Enforced when a requested rule is not found.
+# policy_default_rule = default
+
+# Directories where policy configuration files are stored.
+# They can be relative to any directory in the search path defined by the
+# config_dir option, or absolute paths. The file defined by policy_file
+# must exist for these directories to be searched. Missing or empty
+# directories are ignored.
+# policy_dirs = policy.d
+
+[oslo_messaging_amqp]
+
+#
+# From oslo.messaging
+#
+
+# Address prefix used when sending to a specific server (string value)
+# Deprecated group/name - [amqp1]/server_request_prefix
+# server_request_prefix = exclusive
+
+# Address prefix used when broadcasting to all servers (string value)
+# Deprecated group/name - [amqp1]/broadcast_prefix
+# broadcast_prefix = broadcast
+
+# Address prefix when sending to any server in group (string value)
+# Deprecated group/name - [amqp1]/group_request_prefix
+# group_request_prefix = unicast
+
+# Name for the AMQP container (string value)
+# Deprecated group/name - [amqp1]/container_name
+# container_name =
+
+# Timeout for inactive connections (in seconds) (integer value)
+# Deprecated group/name - [amqp1]/idle_timeout
+# idle_timeout = 0
+
+# Debug: dump AMQP frames to stdout (boolean value)
+# Deprecated group/name - [amqp1]/trace
+# trace = false
+
+# CA certificate PEM file for verifing server certificate (string value)
+# Deprecated group/name - [amqp1]/ssl_ca_file
+# ssl_ca_file =
+
+# Identifying certificate PEM file to present to clients (string value)
+# Deprecated group/name - [amqp1]/ssl_cert_file
+# ssl_cert_file =
+
+# Private key PEM file used to sign cert_file certificate (string value)
+# Deprecated group/name - [amqp1]/ssl_key_file
+# ssl_key_file =
+
+# Password for decrypting ssl_key_file (if encrypted) (string value)
+# Deprecated group/name - [amqp1]/ssl_key_password
+# ssl_key_password =
+
+# Accept clients using either SSL or plain TCP (boolean value)
+# Deprecated group/name - [amqp1]/allow_insecure_clients
+# allow_insecure_clients = false
+
+
+[oslo_messaging_qpid]
+
+#
+# From oslo.messaging
+#
+
+# Use durable queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
+# amqp_durable_queues = false
+
+# Auto-delete queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/amqp_auto_delete
+# amqp_auto_delete = false
+
+# Size of RPC connection pool. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_conn_pool_size
+# rpc_conn_pool_size = 30
+
+# Qpid broker hostname. (string value)
+# Deprecated group/name - [DEFAULT]/qpid_hostname
+# qpid_hostname = localhost
+
+# Qpid broker port. (integer value)
+# Deprecated group/name - [DEFAULT]/qpid_port
+# qpid_port = 5672
+
+# Qpid HA cluster host:port pairs. (list value)
+# Deprecated group/name - [DEFAULT]/qpid_hosts
+# qpid_hosts = $qpid_hostname:$qpid_port
+
+# Username for Qpid connection. (string value)
+# Deprecated group/name - [DEFAULT]/qpid_username
+# qpid_username =
+
+# Password for Qpid connection. (string value)
+# Deprecated group/name - [DEFAULT]/qpid_password
+# qpid_password =
+
+# Space separated list of SASL mechanisms to use for auth. (string value)
+# Deprecated group/name - [DEFAULT]/qpid_sasl_mechanisms
+# qpid_sasl_mechanisms =
+
+# Seconds between connection keepalive heartbeats. (integer value)
+# Deprecated group/name - [DEFAULT]/qpid_heartbeat
+# qpid_heartbeat = 60
+
+# Transport to use, either 'tcp' or 'ssl'. (string value)
+# Deprecated group/name - [DEFAULT]/qpid_protocol
+# qpid_protocol = tcp
+
+# Whether to disable the Nagle algorithm. (boolean value)
+# Deprecated group/name - [DEFAULT]/qpid_tcp_nodelay
+# qpid_tcp_nodelay = true
+
+# The number of prefetched messages held by receiver. (integer value)
+# Deprecated group/name - [DEFAULT]/qpid_receiver_capacity
+# qpid_receiver_capacity = 1
+
+# The qpid topology version to use.  Version 1 is what was originally used by
+# impl_qpid.  Version 2 includes some backwards-incompatible changes that allow
+# broker federation to work.  Users should update to version 2 when they are
+# able to take everything down, as it requires a clean break. (integer value)
+# Deprecated group/name - [DEFAULT]/qpid_topology_version
+# qpid_topology_version = 1
+
+
+[oslo_messaging_rabbit]
+
+#
+# From oslo.messaging
+#
+
+# Use durable queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
+# amqp_durable_queues = false
+
+# Auto-delete queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/amqp_auto_delete
+# amqp_auto_delete = false
+
+# Size of RPC connection pool. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_conn_pool_size
+rpc_conn_pool_size = 40
+
+# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
+# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
+# distributions. (string value)
+# Deprecated group/name - [DEFAULT]/kombu_ssl_version
+# kombu_ssl_version =
+
+# SSL key file (valid only if SSL enabled). (string value)
+# Deprecated group/name - [DEFAULT]/kombu_ssl_keyfile
+# kombu_ssl_keyfile =
+
+# SSL cert file (valid only if SSL enabled). (string value)
+# Deprecated group/name - [DEFAULT]/kombu_ssl_certfile
+# kombu_ssl_certfile =
+
+# SSL certification authority file (valid only if SSL enabled). (string value)
+# Deprecated group/name - [DEFAULT]/kombu_ssl_ca_certs
+# kombu_ssl_ca_certs =
+
+# How long to wait before reconnecting in response to an AMQP consumer cancel
+# notification. (floating point value)
+# Deprecated group/name - [DEFAULT]/kombu_reconnect_delay
+# kombu_reconnect_delay = 1.0
+
+# The RabbitMQ broker address where a single node is used. (string value)
+# Deprecated group/name - [DEFAULT]/rabbit_host
+# rabbit_host = localhost
+
+
+{%- if server.message_queue.members is defined %}
+rabbit_hosts = {% for member in server.message_queue.members -%}
+                   {{ member.host }}:{{ member.get('port', 5672) }}
+                   {%- if not loop.last -%},{%- endif -%}
+               {%- endfor -%}
+{%- else %}
+rabbit_host = {{ server.message_queue.host }}
+rabbit_port = {{ server.message_queue.port }}
+{%- endif %}
+
+rabbit_userid = {{ neutron.message_queue.user }}
+rabbit_password = {{ neutron.message_queue.password }}
+rabbit_virtual_host = {{ neutron.message_queue.virtual_host }}
+
+
+rabbit_retry_interval = 1
+
+rabbit_retry_backoff = 2
+
+rabbit_max_retries = 0
+
+# Use HA queues in RabbitMQ (x-ha-policy: all). If you change this option, you
+# must wipe the RabbitMQ database. (boolean value)
+# Deprecated group/name - [DEFAULT]/rabbit_ha_queues
+# rabbit_ha_queues = false
+
+# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake (boolean value)
+# Deprecated group/name - [DEFAULT]/fake_rabbit
+# fake_rabbit = false
+[QUOTAS]
+quota_network = -1
+quota_subnet = -1
+quota_port = -1
+
+[NOVA]
+vif_types = vrouter
+
+[service_providers]
+service_provider = LOADBALANCER:Opencontrail:neutron_plugin_contrail.plugins.opencontrail.loadbalancer.driver.OpencontrailLoadbalancerDriver:default
diff --git a/neutron/files/kilo/neutron-server.conf.contrail.RedHat b/neutron/files/kilo/neutron-server.conf.contrail.RedHat
new file mode 100644
index 0000000..b09917f
--- /dev/null
+++ b/neutron/files/kilo/neutron-server.conf.contrail.RedHat
@@ -0,0 +1,1024 @@
+{%- set neutron = pillar.neutron.server %}
+{%- from "neutron/map.jinja" import server with context %}
+[DEFAULT]
+# Print more verbose output (set logging level to INFO instead of default WARNING level).
+# verbose = False
+verbose = true
+
+# =========Start Global Config Option for Distributed L3 Router===============
+# Setting the "router_distributed" flag to "True" will default to the creation
+# of distributed tenant routers. The admin can override this flag by specifying
+# the type of the router on the create request (admin-only attribute). Default
+# value is "False" to support legacy mode (centralized) routers.
+#
+# router_distributed = False
+#
+# ===========End Global Config Option for Distributed L3 Router===============
+
+# Print debugging output (set logging level to DEBUG instead of default WARNING level).
+# debug = False
+
+# Where to store Neutron state files.  This directory must be writable by the
+# user executing the agent.
+# state_path = /var/lib/neutron
+state_path = /var/lib/neutron
+
+# log_format = %(asctime)s %(levelname)8s [%(name)s] %(message)s
+# log_date_format = %Y-%m-%d %H:%M:%S
+
+# use_syslog                           -> syslog
+# log_file and log_dir                 -> log_dir/log_file
+# (not log_file) and log_dir           -> log_dir/{binary_name}.log
+# use_stderr                           -> stderr
+# (not user_stderr) and (not log_file) -> stdout
+# publish_errors                       -> notification system
+
+# use_syslog = False
+# syslog_log_facility = LOG_USER
+
+# use_stderr = True
+# log_file =
+# log_dir =
+
+# publish_errors = False
+
+# Address to bind the API server to
+bind_host = {{ neutron.bind.address }}
+
+# Port the bind the API server to
+# bind_port = 9696
+bind_port = {{ neutron.bind.port }}
+
+# Path to the extensions.  Note that this can be a colon-separated list of
+# paths.  For example:
+# api_extensions_path = extensions:/path/to/more/extensions:/even/more/extensions
+# The __path__ of neutron.extensions is appended to this, so if your
+# extensions are in there you don't need to specify them here
+# api_extensions_path =
+
+# (StrOpt) Neutron core plugin entrypoint to be loaded from the
+# neutron.core_plugins namespace. See setup.cfg for the entrypoint names of the
+# plugins included in the neutron source distribution. For compatibility with
+# previous versions, the class name of a plugin can be specified instead of its
+# entrypoint name.
+#
+#core_plugin = ml2
+# Example: core_plugin = ml2
+core_plugin = neutron_plugin_contrail.plugins.opencontrail.contrail_plugin.NeutronPluginContrailCoreV2
+api_extensions_path = extensions:/usr/lib/python2.7/site-packages/neutron_plugin_contrail/extensions
+# (ListOpt) List of service plugin entrypoints to be loaded from the
+# neutron.service_plugins namespace. See setup.cfg for the entrypoint names of
+# the plugins included in the neutron source distribution. For compatibility
+# with previous versions, the class name of a plugin can be specified instead
+# of its entrypoint name.
+#
+# service_plugins =
+# Example: service_plugins = router,firewall,lbaas,vpnaas,metering
+#service_plugins = neutron_plugin_contrail.plugins.opencontrail.loadbalancer.plugin.LoadBalancerPlugin
+
+# Paste configuration file
+# api_paste_config = api-paste.ini
+
+# (StrOpt) Hostname to be used by the neutron server, agents and services
+# running on this machine. All the agents and services running on this machine
+# must use the same host value.
+# The default value is hostname of the machine.
+#
+# host =
+
+# The strategy to be used for auth.
+# Supported values are 'keystone'(default), 'noauth'.
+# auth_strategy = keystone
+auth_strategy = keystone
+
+# Base MAC address. The first 3 octets will remain unchanged. If the
+# 4h octet is not 00, it will also be used. The others will be
+# randomly generated.
+# 3 octet
+# base_mac = fa:16:3e:00:00:00
+# 4 octet
+# base_mac = fa:16:3e:4f:00:00
+
+# DVR Base MAC address. The first 3 octets will remain unchanged. If the
+# 4th octet is not 00, it will also be used.  The others will be randomly
+# generated. The 'dvr_base_mac' *must* be different from 'base_mac' to
+# avoid mixing them up with MAC's allocated for tenant ports.
+# A 4 octet example would be dvr_base_mac = fa:16:3f:4f:00:00
+# The default is 3 octet
+# dvr_base_mac = fa:16:3f:00:00:00
+
+# Maximum amount of retries to generate a unique MAC address
+# mac_generation_retries = 16
+
+# DHCP Lease duration (in seconds).  Use -1 to
+# tell dnsmasq to use infinite lease times.
+# dhcp_lease_duration = 86400
+
+# Allow sending resource operation notification to DHCP agent
+# dhcp_agent_notification = True
+
+# Enable or disable bulk create/update/delete operations
+# allow_bulk = True
+# Enable or disable pagination
+# allow_pagination = False
+# Enable or disable sorting
+# allow_sorting = False
+# Enable or disable overlapping IPs for subnets
+# Attention: the following parameter MUST be set to False if Neutron is
+# being used in conjunction with nova security groups
+# allow_overlapping_ips = False
+allow_overlapping_ips = True
+# Ensure that configured gateway is on subnet. For IPv6, validate only if
+# gateway is not a link local address. Deprecated, to be removed during the
+# K release, at which point the check will be mandatory.
+# force_gateway_on_subnet = True
+
+# Default maximum number of items returned in a single response,
+# value == infinite and value < 0 means no max limit, and value must
+# be greater than 0. If the number of items requested is greater than
+# pagination_max_limit, server will just return pagination_max_limit
+# of number of items.
+# pagination_max_limit = -1
+
+# Maximum number of DNS nameservers per subnet
+# max_dns_nameservers = 5
+
+# Maximum number of host routes per subnet
+# max_subnet_host_routes = 20
+
+# Maximum number of fixed ips per port
+# max_fixed_ips_per_port = 5
+
+# Maximum number of routes per router
+# max_routes = 30
+
+# Default Subnet Pool to be used for IPv4 subnet-allocation.
+# Specifies by UUID the pool to be used in case of subnet-create being called
+# without a subnet-pool ID.  The default of None means that no pool will be
+# used unless passed explicitly to subnet create.  If no pool is used, then a
+# CIDR must be passed to create a subnet and that subnet will not be allocated
+# from any pool; it will be considered part of the tenant's private address
+# space.
+# default_ipv4_subnet_pool =
+
+# Default Subnet Pool to be used for IPv6 subnet-allocation.
+# Specifies by UUID the pool to be used in case of subnet-create being
+# called without a subnet-pool ID.  Set to "prefix_delegation"
+# to enable IPv6 Prefix Delegation in a PD-capable environment.
+# See the description for default_ipv4_subnet_pool for more information.
+# default_ipv6_subnet_pool =
+
+# =========== items for MTU selection and advertisement =============
+# Advertise MTU.  If True, effort is made to advertise MTU
+# settings to VMs via network methods (ie. DHCP and RA MTU options)
+# when the network's preferred MTU is known.
+# advertise_mtu = False
+# ======== end of items for MTU selection and advertisement =========
+
+# =========== items for agent management extension =============
+# Seconds to regard the agent as down; should be at least twice
+# report_interval, to be sure the agent is down for good
+# agent_down_time = 75
+# ===========  end of items for agent management extension =====
+
+# =========== items for agent scheduler extension =============
+# Driver to use for scheduling network to DHCP agent
+# network_scheduler_driver = neutron.scheduler.dhcp_agent_scheduler.ChanceScheduler
+# Driver to use for scheduling router to a default L3 agent
+# router_scheduler_driver = neutron.scheduler.l3_agent_scheduler.ChanceScheduler
+# Driver to use for scheduling a loadbalancer pool to an lbaas agent
+# loadbalancer_pool_scheduler_driver = neutron.services.loadbalancer.agent_scheduler.ChanceScheduler
+
+# (StrOpt) Representing the resource type whose load is being reported by
+# the agent.
+# This can be 'networks','subnets' or 'ports'. When specified (Default is networks),
+# the server will extract particular load sent as part of its agent configuration object
+# from the agent report state, which is the number of resources being consumed, at
+# every report_interval.
+# dhcp_load_type can be used in combination with network_scheduler_driver =
+# neutron.scheduler.dhcp_agent_scheduler.WeightScheduler
+# When the network_scheduler_driver is WeightScheduler, dhcp_load_type can
+# be configured to represent the choice for the resource being balanced.
+# Example: dhcp_load_type = networks
+# Values:
+#   networks - number of networks hosted on the agent
+#   subnets -  number of subnets associated with the networks hosted on the agent
+#   ports   -  number of ports associated with the networks hosted on the agent
+# dhcp_load_type = networks
+
+# Allow auto scheduling networks to DHCP agent. It will schedule non-hosted
+# networks to first DHCP agent which sends get_active_networks message to
+# neutron server
+# network_auto_schedule = True
+
+# Allow auto scheduling routers to L3 agent. It will schedule non-hosted
+# routers to first L3 agent which sends sync_routers message to neutron server
+# router_auto_schedule = True
+
+# Allow automatic rescheduling of routers from dead L3 agents with
+# admin_state_up set to True to alive agents.
+# allow_automatic_l3agent_failover = False
+
+# Allow automatic removal of networks from dead DHCP agents with
+# admin_state_up set to True.
+# Networks could then be rescheduled if network_auto_schedule is True
+# allow_automatic_dhcp_failover = True
+
+# Number of DHCP agents scheduled to host a network. This enables redundant
+# DHCP agents for configured networks.
+# dhcp_agents_per_network = 1
+
+# Enable services on agents with admin_state_up False.
+# If this option is False, when admin_state_up of an agent is turned to
+# False, services on it will be disabled. If this option is True, services
+# on agents with admin_state_up False keep available and manual scheduling
+# to such agents is available. Agents with admin_state_up False are not
+# selected for automatic scheduling regardless of this option.
+# enable_services_on_agents_with_admin_state_down = False
+
+# ===========  end of items for agent scheduler extension =====
+
+# =========== items for l3 extension ==============
+# Enable high availability for virtual routers.
+# l3_ha = False
+#
+# Maximum number of l3 agents which a HA router will be scheduled on. If it
+# is set to 0 the router will be scheduled on every agent.
+# max_l3_agents_per_router = 3
+#
+# Minimum number of l3 agents which a HA router will be scheduled on. The
+# default value is 2.
+# min_l3_agents_per_router = 2
+#
+# CIDR of the administrative network if HA mode is enabled
+# l3_ha_net_cidr = 169.254.192.0/18
+# =========== end of items for l3 extension =======
+
+# =========== items for metadata proxy configuration ==============
+# User (uid or name) running metadata proxy after its initialization
+# (if empty: agent effective user)
+# metadata_proxy_user =
+
+# Group (gid or name) running metadata proxy after its initialization
+# (if empty: agent effective group)
+# metadata_proxy_group =
+
+# Enable/Disable log watch by metadata proxy, it should be disabled when
+# metadata_proxy_user/group is not allowed to read/write its log file and
+# 'copytruncate' logrotate option must be used if logrotate is enabled on
+# metadata proxy log files. Option default value is deduced from
+# metadata_proxy_user: watch log is enabled if metadata_proxy_user is agent
+# effective user id/name.
+# metadata_proxy_watch_log =
+
+# Location of Metadata Proxy UNIX domain socket
+# metadata_proxy_socket = $state_path/metadata_proxy
+# =========== end of items for metadata proxy configuration ==============
+
+# ========== items for VLAN trunking networks ==========
+# Setting this flag to True will allow plugins that support it to
+# create VLAN transparent networks. This flag has no effect for
+# plugins that do not support VLAN transparent networks.
+# vlan_transparent = False
+# ========== end of items for VLAN trunking networks ==========
+
+# =========== WSGI parameters related to the API server ==============
+# Number of separate worker processes to spawn.  The default, 0, runs the
+# worker thread in the current process.  Greater than 0 launches that number of
+# child processes as workers.  The parent process manages them.
+# api_workers = 0
+
+# Number of separate RPC worker processes to spawn.  The default, 0, runs the
+# worker thread in the current process.  Greater than 0 launches that number of
+# child processes as RPC workers.  The parent process manages them.
+# This feature is experimental until issues are addressed and testing has been
+# enabled for various plugins for compatibility.
+# rpc_workers = 0
+
+# Timeout for client connections socket operations. If an
+# incoming connection is idle for this number of seconds it
+# will be closed. A value of '0' means wait forever. (integer
+# value)
+# client_socket_timeout = 900
+
+# wsgi keepalive option. Determines if connections are allowed to be held open
+# by clients after a request is fulfilled. A value of False will ensure that
+# the socket connection will be explicitly closed once a response has been
+# sent to the client.
+# wsgi_keep_alive = True
+
+# Sets the value of TCP_KEEPIDLE in seconds to use for each server socket when
+# starting API server. Not supported on OS X.
+# tcp_keepidle = 600
+
+# Number of seconds to keep retrying to listen
+# retry_until_window = 30
+
+# Number of backlog requests to configure the socket with.
+# backlog = 4096
+
+# Max header line to accommodate large tokens
+# max_header_line = 16384
+
+# Enable SSL on the API server
+# use_ssl = False
+
+# Certificate file to use when starting API server securely
+# ssl_cert_file = /path/to/certfile
+
+# Private key file to use when starting API server securely
+# ssl_key_file = /path/to/keyfile
+
+# CA certificate file to use when starting API server securely to
+# verify connecting clients. This is an optional parameter only required if
+# API clients need to authenticate to the API server using SSL certificates
+# signed by a trusted CA
+# ssl_ca_file = /path/to/cafile
+# ======== end of WSGI parameters related to the API server ==========
+
+# ======== neutron nova interactions ==========
+# Send notification to nova when port status is active.
+# notify_nova_on_port_status_changes = True
+notify_nova_on_port_status_changes = True
+
+# Send notifications to nova when port data (fixed_ips/floatingips) change
+# so nova can update it's cache.
+# notify_nova_on_port_data_changes = True
+notify_nova_on_port_data_changes = True
+
+# URL for connection to nova (Only supports one nova region currently).
+# nova_url = http://127.0.0.1:8774/v2
+nova_url = http://{{ neutron.compute.host }}:8774/v2
+
+# Name of nova region to use. Useful if keystone manages more than one region
+# nova_region_name =
+nova_region_name = {{ neutron.compute.region }}
+
+# Username for connection to nova in admin context
+# nova_admin_username =
+nova_admin_username = {{ neutron.compute.user }}
+
+# The uuid of the admin nova tenant
+# nova_admin_tenant_id =
+
+# The name of the admin nova tenant. If the uuid of the admin nova tenant
+# is set, this is optional.  Useful for cases where the uuid of the admin
+# nova tenant is not available when configuration is being done.
+# nova_admin_tenant_name =
+nova_admin_tenant_name = {{ neutron.compute.tenant }}
+
+# Password for connection to nova in admin context.
+# nova_admin_password =
+nova_admin_password = {{ neutron.compute.password }}
+
+# Authorization URL for connection to nova in admin context.
+# nova_admin_auth_url =
+nova_admin_auth_url = http://{{ neutron.identity.host }}:35357
+
+# CA file for novaclient to verify server certificates
+# nova_ca_certificates_file =
+
+# Boolean to control ignoring SSL errors on the nova url
+# nova_api_insecure = False
+
+# Number of seconds between sending events to nova if there are any events to send
+# send_events_interval = 2
+send_events_interval = 2
+
+# ======== end of neutron nova interactions ==========
+
+#
+# Options defined in oslo.messaging
+#
+
+# Use durable queues in amqp. (boolean value)
+# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
+# amqp_durable_queues=false
+
+# Auto-delete queues in amqp. (boolean value)
+# amqp_auto_delete=false
+
+# Size of RPC connection pool. (integer value)
+# rpc_conn_pool_size=30
+
+# Qpid broker hostname. (string value)
+# qpid_hostname=localhost
+
+# Qpid broker port. (integer value)
+# qpid_port=5672
+
+# Qpid HA cluster host:port pairs. (list value)
+# qpid_hosts=$qpid_hostname:$qpid_port
+
+# Username for Qpid connection. (string value)
+# qpid_username=
+
+# Password for Qpid connection. (string value)
+# qpid_password=
+
+# Space separated list of SASL mechanisms to use for auth.
+# (string value)
+# qpid_sasl_mechanisms=
+
+# Seconds between connection keepalive heartbeats. (integer
+# value)
+# qpid_heartbeat=60
+
+# Transport to use, either 'tcp' or 'ssl'. (string value)
+# qpid_protocol=tcp
+
+# Whether to disable the Nagle algorithm. (boolean value)
+# qpid_tcp_nodelay=true
+
+# The qpid topology version to use.  Version 1 is what was
+# originally used by impl_qpid.  Version 2 includes some
+# backwards-incompatible changes that allow broker federation
+# to work.  Users should update to version 2 when they are
+# able to take everything down, as it requires a clean break.
+# (integer value)
+# qpid_topology_version=1
+
+# SSL version to use (valid only if SSL enabled). valid values
+# are TLSv1, SSLv23 and SSLv3. SSLv2 may be available on some
+# distributions. (string value)
+# kombu_ssl_version=
+
+# SSL key file (valid only if SSL enabled). (string value)
+# kombu_ssl_keyfile=
+
+# SSL cert file (valid only if SSL enabled). (string value)
+# kombu_ssl_certfile=
+
+# SSL certification authority file (valid only if SSL
+# enabled). (string value)
+# kombu_ssl_ca_certs=
+
+# How long to wait before reconnecting in response to an AMQP
+# consumer cancel notification. (floating point value)
+# kombu_reconnect_delay=1.0
+
+# The RabbitMQ broker address where a single node is used.
+# (string value)
+# rabbit_host=localhost
+
+# The RabbitMQ broker port where a single node is used.
+# (integer value)
+# rabbit_port=5672
+
+# RabbitMQ HA cluster host:port pairs. (list value)
+# rabbit_hosts=$rabbit_host:$rabbit_port
+
+# Connect over SSL for RabbitMQ. (boolean value)
+# rabbit_use_ssl=false
+
+# The RabbitMQ userid. (string value)
+# rabbit_userid=guest
+
+# The RabbitMQ password. (string value)
+# rabbit_password=guest
+
+# the RabbitMQ login method (string value)
+# rabbit_login_method=AMQPLAIN
+
+# The RabbitMQ virtual host. (string value)
+# rabbit_virtual_host=/
+
+# How frequently to retry connecting with RabbitMQ. (integer
+# value)
+# rabbit_retry_interval=1
+
+# How long to backoff for between retries when connecting to
+# RabbitMQ. (integer value)
+# rabbit_retry_backoff=2
+
+# Maximum number of RabbitMQ connection retries. Default is 0
+# (infinite retry count). (integer value)
+# rabbit_max_retries=0
+
+# Use HA queues in RabbitMQ (x-ha-policy: all). If you change
+# this option, you must wipe the RabbitMQ database. (boolean
+# value)
+# rabbit_ha_queues=false
+
+# If passed, use a fake RabbitMQ provider. (boolean value)
+# fake_rabbit=false
+
+# ZeroMQ bind address. Should be a wildcard (*), an ethernet
+# interface, or IP. The "host" option should point or resolve
+# to this address. (string value)
+# rpc_zmq_bind_address=*
+
+# MatchMaker driver. (string value)
+# rpc_zmq_matchmaker=oslo.messaging._drivers.matchmaker.MatchMakerLocalhost
+
+# ZeroMQ receiver listening port. (integer value)
+# rpc_zmq_port=9501
+
+# Number of ZeroMQ contexts, defaults to 1. (integer value)
+# rpc_zmq_contexts=1
+
+# Maximum number of ingress messages to locally buffer per
+# topic. Default is unlimited. (integer value)
+# rpc_zmq_topic_backlog=
+
+# Directory for holding IPC sockets. (string value)
+# rpc_zmq_ipc_dir=/var/run/openstack
+
+# Name of this node. Must be a valid hostname, FQDN, or IP
+# address. Must match "host" option, if running Nova. (string
+# value)
+# rpc_zmq_host=oslo
+
+# Seconds to wait before a cast expires (TTL). Only supported
+# by impl_zmq. (integer value)
+# rpc_cast_timeout=30
+rpc_cast_timeout=30
+
+# Heartbeat frequency. (integer value)
+# matchmaker_heartbeat_freq=300
+
+# Heartbeat time-to-live. (integer value)
+# matchmaker_heartbeat_ttl=600
+
+# Size of RPC greenthread pool. (integer value)
+# rpc_thread_pool_size=64
+rpc_thread_pool_size=70
+
+# Driver or drivers to handle sending notifications. (multi
+# valued)
+# notification_driver=
+{%- if server.notification %}
+notification_driver = neutron.openstack.common.notifier.rpc_notifier
+{%- endif %}
+# AMQP topic used for OpenStack notifications. (list value)
+# Deprecated group/name - [rpc_notifier2]/topics
+# notification_topics=notifications
+
+# Seconds to wait for a response from a call. (integer value)
+# rpc_response_timeout=60
+rpc_response_timeout=60
+
+# A URL representing the messaging driver to use and its full
+# configuration. If not set, we fall back to the rpc_backend
+# option and driver specific configuration. (string value)
+# transport_url=
+
+# The messaging driver to use, defaults to rabbit. Other
+# drivers include qpid and zmq. (string value)
+# rpc_backend=rabbit
+rpc_backend=rabbit
+
+# The default exchange under which topics are scoped. May be
+# overridden by an exchange name specified in the
+# transport_url option. (string value)
+# control_exchange=openstack
+
+
+[matchmaker_redis]
+
+#
+# Options defined in oslo.messaging
+#
+
+# Host to locate redis. (string value)
+# host=127.0.0.1
+
+# Use this port to connect to redis host. (integer value)
+# port=6379
+
+# Password for Redis server (optional). (string value)
+# password=
+
+
+[matchmaker_ring]
+
+#
+# Options defined in oslo.messaging
+#
+
+# Matchmaker ring file (JSON). (string value)
+# Deprecated group/name - [DEFAULT]/matchmaker_ringfile
+# ringfile=/etc/oslo/matchmaker_ring.json
+
+[quotas]
+# Default driver to use for quota checks
+# quota_driver = neutron.db.quota_db.DbQuotaDriver
+quota_driver = neutron_plugin_contrail.plugins.opencontrail.quota.driver.QuotaDriver
+
+# Resource name(s) that are supported in quota features
+# quota_items = network,subnet,port
+
+# Default number of resource allowed per tenant. A negative value means
+# unlimited.
+# default_quota = -1
+
+# Number of networks allowed per tenant. A negative value means unlimited.
+# quota_network = 10
+
+# Number of subnets allowed per tenant. A negative value means unlimited.
+# quota_subnet = 10
+
+# Number of ports allowed per tenant. A negative value means unlimited.
+# quota_port = 50
+
+# Number of security groups allowed per tenant. A negative value means
+# unlimited.
+# quota_security_group = 10
+
+# Number of security group rules allowed per tenant. A negative value means
+# unlimited.
+# quota_security_group_rule = 100
+
+# Number of vips allowed per tenant. A negative value means unlimited.
+# quota_vip = 10
+
+# Number of pools allowed per tenant. A negative value means unlimited.
+# quota_pool = 10
+
+# Number of pool members allowed per tenant. A negative value means unlimited.
+# The default is unlimited because a member is not a real resource consumer
+# on Openstack. However, on back-end, a member is a resource consumer
+# and that is the reason why quota is possible.
+# quota_member = -1
+
+# Number of health monitors allowed per tenant. A negative value means
+# unlimited.
+# The default is unlimited because a health monitor is not a real resource
+# consumer on Openstack. However, on back-end, a member is a resource consumer
+# and that is the reason why quota is possible.
+# quota_health_monitor = -1
+
+# Number of loadbalancers allowed per tenant. A negative value means unlimited.
+# quota_loadbalancer = 10
+
+# Number of listeners allowed per tenant. A negative value means unlimited.
+# quota_listener = -1
+
+# Number of v2 health monitors allowed per tenant. A negative value means
+# unlimited. These health monitors exist under the lbaas v2 API
+# quota_healthmonitor = -1
+
+# Number of routers allowed per tenant. A negative value means unlimited.
+# quota_router = 10
+
+# Number of floating IPs allowed per tenant. A negative value means unlimited.
+# quota_floatingip = 50
+
+# Number of firewalls allowed per tenant. A negative value means unlimited.
+# quota_firewall = 1
+
+# Number of firewall policies allowed per tenant. A negative value means
+# unlimited.
+# quota_firewall_policy = 1
+
+# Number of firewall rules allowed per tenant. A negative value means
+# unlimited.
+# quota_firewall_rule = 100
+
+[agent]
+# Use "sudo neutron-rootwrap /etc/neutron/rootwrap.conf" to use the real
+# root filter facility.
+# Change to "sudo" to skip the filtering and just run the command directly
+root_helper = sudo /usr/bin/neutron-rootwrap /etc/neutron/rootwrap.conf
+
+# Set to true to add comments to generated iptables rules that describe
+# each rule's purpose. (System must support the iptables comments module.)
+# comment_iptables_rules = True
+
+# Root helper daemon application to use when possible.
+# root_helper_daemon =
+
+# Use the root helper when listing the namespaces on a system. This may not
+# be required depending on the security configuration. If the root helper is
+# not required, set this to False for a performance improvement.
+# use_helper_for_ns_read = True
+
+# The interval to check external processes for failure in seconds (0=disabled)
+# check_child_processes_interval = 60
+
+# Action to take when an external process spawned by an agent dies
+# Values:
+#   respawn - Respawns the external process
+#   exit - Exits the agent
+# check_child_processes_action = respawn
+
+# =========== items for agent management extension =============
+# seconds between nodes reporting state to server; should be less than
+# agent_down_time, best if it is half or less than agent_down_time
+# report_interval = 30
+
+# ===========  end of items for agent management extension =====
+
+[keystone_authtoken]
+
+identity_uri = http://{{ neutron.identity.host }}:5000
+auth_host = {{ neutron.identity.host }}
+auth_port = {{ neutron.identity.port }}
+auth_protocol = http
+admin_tenant_name = {{ neutron.identity.tenant }}
+admin_user = {{ neutron.identity.user }}
+admin_password = {{ neutron.identity.password }}
+auth_uri=http://{{ neutron.identity.host }}:5000
+auth_url=http://{{ neutron.identity.host }}:35357
+auth_region={{ neutron.identity.region }}
+
+[database]
+# This line MUST be changed to actually run the plugin.
+# Example:
+connection = sqlite:////var/lib/neutron/neutron.sqlite
+# Replace 127.0.0.1 above with the IP address of the database used by the
+# main neutron server. (Leave it as is if the database runs on this host.)
+# connection = sqlite://
+# NOTE: In deployment the [database] section and its connection attribute may
+# be set in the corresponding core plugin '.ini' file. However, it is suggested
+# to put the [database] section and its connection attribute in this
+# configuration file.
+
+# Database engine for which script will be generated when using offline
+# migration
+# engine =
+
+# The SQLAlchemy connection string used to connect to the slave database
+# slave_connection =
+
+# Database reconnection retry times - in event connectivity is lost
+# set to -1 implies an infinite retry count
+# max_retries = 10
+
+# Database reconnection interval in seconds - if the initial connection to the
+# database fails
+# retry_interval = 10
+
+# Minimum number of SQL connections to keep open in a pool
+# min_pool_size = 1
+
+# Maximum number of SQL connections to keep open in a pool
+# max_pool_size = 10
+
+# Timeout in seconds before idle sql connections are reaped
+# idle_timeout = 3600
+
+# If set, use this value for max_overflow with sqlalchemy
+# max_overflow = 20
+
+# Verbosity of SQL debugging information. 0=None, 100=Everything
+# connection_debug = 0
+
+# Add python stack traces to SQL as comment strings
+# connection_trace = False
+
+# If set, use this value for pool_timeout with sqlalchemy
+# pool_timeout = 10
+
+[nova]
+# Name of the plugin to load
+# auth_plugin =
+
+# Config Section from which to load plugin specific options
+# auth_section =
+
+# PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# cafile =
+
+# PEM encoded client certificate cert file
+# certfile =
+
+# Verify HTTPS connections.
+# insecure = False
+
+# PEM encoded client certificate key file
+# keyfile =
+
+# Name of nova region to use. Useful if keystone manages more than one region.
+# region_name =
+
+# Timeout value for http requests
+# timeout =
+
+[oslo_concurrency]
+
+# Directory to use for lock files. For security, the specified directory should
+# only be writable by the user running the processes that need locking.
+# Defaults to environment variable OSLO_LOCK_PATH. If external locks are used,
+# a lock path must be set.
+lock_path = $state_path/lock
+
+# Enables or disables inter-process locks.
+# disable_process_locking = False
+
+[oslo_policy]
+
+# The JSON file that defines policies.
+# policy_file = policy.json
+
+# Default rule. Enforced when a requested rule is not found.
+# policy_default_rule = default
+
+# Directories where policy configuration files are stored.
+# They can be relative to any directory in the search path defined by the
+# config_dir option, or absolute paths. The file defined by policy_file
+# must exist for these directories to be searched. Missing or empty
+# directories are ignored.
+# policy_dirs = policy.d
+
+[oslo_messaging_amqp]
+
+#
+# From oslo.messaging
+#
+
+# Address prefix used when sending to a specific server (string value)
+# Deprecated group/name - [amqp1]/server_request_prefix
+# server_request_prefix = exclusive
+
+# Address prefix used when broadcasting to all servers (string value)
+# Deprecated group/name - [amqp1]/broadcast_prefix
+# broadcast_prefix = broadcast
+
+# Address prefix when sending to any server in group (string value)
+# Deprecated group/name - [amqp1]/group_request_prefix
+# group_request_prefix = unicast
+
+# Name for the AMQP container (string value)
+# Deprecated group/name - [amqp1]/container_name
+# container_name =
+
+# Timeout for inactive connections (in seconds) (integer value)
+# Deprecated group/name - [amqp1]/idle_timeout
+# idle_timeout = 0
+
+# Debug: dump AMQP frames to stdout (boolean value)
+# Deprecated group/name - [amqp1]/trace
+# trace = false
+
+# CA certificate PEM file for verifing server certificate (string value)
+# Deprecated group/name - [amqp1]/ssl_ca_file
+# ssl_ca_file =
+
+# Identifying certificate PEM file to present to clients (string value)
+# Deprecated group/name - [amqp1]/ssl_cert_file
+# ssl_cert_file =
+
+# Private key PEM file used to sign cert_file certificate (string value)
+# Deprecated group/name - [amqp1]/ssl_key_file
+# ssl_key_file =
+
+# Password for decrypting ssl_key_file (if encrypted) (string value)
+# Deprecated group/name - [amqp1]/ssl_key_password
+# ssl_key_password =
+
+# Accept clients using either SSL or plain TCP (boolean value)
+# Deprecated group/name - [amqp1]/allow_insecure_clients
+# allow_insecure_clients = false
+
+
+[oslo_messaging_qpid]
+
+#
+# From oslo.messaging
+#
+
+# Use durable queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
+# amqp_durable_queues = false
+
+# Auto-delete queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/amqp_auto_delete
+# amqp_auto_delete = false
+
+# Size of RPC connection pool. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_conn_pool_size
+# rpc_conn_pool_size = 30
+
+# Qpid broker hostname. (string value)
+# Deprecated group/name - [DEFAULT]/qpid_hostname
+# qpid_hostname = localhost
+
+# Qpid broker port. (integer value)
+# Deprecated group/name - [DEFAULT]/qpid_port
+# qpid_port = 5672
+
+# Qpid HA cluster host:port pairs. (list value)
+# Deprecated group/name - [DEFAULT]/qpid_hosts
+# qpid_hosts = $qpid_hostname:$qpid_port
+
+# Username for Qpid connection. (string value)
+# Deprecated group/name - [DEFAULT]/qpid_username
+# qpid_username =
+
+# Password for Qpid connection. (string value)
+# Deprecated group/name - [DEFAULT]/qpid_password
+# qpid_password =
+
+# Space separated list of SASL mechanisms to use for auth. (string value)
+# Deprecated group/name - [DEFAULT]/qpid_sasl_mechanisms
+# qpid_sasl_mechanisms =
+
+# Seconds between connection keepalive heartbeats. (integer value)
+# Deprecated group/name - [DEFAULT]/qpid_heartbeat
+# qpid_heartbeat = 60
+
+# Transport to use, either 'tcp' or 'ssl'. (string value)
+# Deprecated group/name - [DEFAULT]/qpid_protocol
+# qpid_protocol = tcp
+
+# Whether to disable the Nagle algorithm. (boolean value)
+# Deprecated group/name - [DEFAULT]/qpid_tcp_nodelay
+# qpid_tcp_nodelay = true
+
+# The number of prefetched messages held by receiver. (integer value)
+# Deprecated group/name - [DEFAULT]/qpid_receiver_capacity
+# qpid_receiver_capacity = 1
+
+# The qpid topology version to use.  Version 1 is what was originally used by
+# impl_qpid.  Version 2 includes some backwards-incompatible changes that allow
+# broker federation to work.  Users should update to version 2 when they are
+# able to take everything down, as it requires a clean break. (integer value)
+# Deprecated group/name - [DEFAULT]/qpid_topology_version
+# qpid_topology_version = 1
+
+
+[oslo_messaging_rabbit]
+
+#
+# From oslo.messaging
+#
+
+# Use durable queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
+# amqp_durable_queues = false
+
+# Auto-delete queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/amqp_auto_delete
+# amqp_auto_delete = false
+
+# Size of RPC connection pool. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_conn_pool_size
+rpc_conn_pool_size = 40
+
+# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
+# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
+# distributions. (string value)
+# Deprecated group/name - [DEFAULT]/kombu_ssl_version
+# kombu_ssl_version =
+
+# SSL key file (valid only if SSL enabled). (string value)
+# Deprecated group/name - [DEFAULT]/kombu_ssl_keyfile
+# kombu_ssl_keyfile =
+
+# SSL cert file (valid only if SSL enabled). (string value)
+# Deprecated group/name - [DEFAULT]/kombu_ssl_certfile
+# kombu_ssl_certfile =
+
+# SSL certification authority file (valid only if SSL enabled). (string value)
+# Deprecated group/name - [DEFAULT]/kombu_ssl_ca_certs
+# kombu_ssl_ca_certs =
+
+# How long to wait before reconnecting in response to an AMQP consumer cancel
+# notification. (floating point value)
+# Deprecated group/name - [DEFAULT]/kombu_reconnect_delay
+# kombu_reconnect_delay = 1.0
+
+# The RabbitMQ broker address where a single node is used. (string value)
+# Deprecated group/name - [DEFAULT]/rabbit_host
+# rabbit_host = localhost
+
+{%- if server.message_queue.members is defined %}
+rabbit_hosts = {% for member in server.message_queue.members -%}
+                   {{ member.host }}:{{ member.get('port', 5672) }}
+                   {%- if not loop.last -%},{%- endif -%}
+               {%- endfor -%}
+{%- else %}
+rabbit_host = {{ server.message_queue.host }}
+rabbit_port = {{ server.message_queue.port }}
+{%- endif %}
+
+rabbit_userid = {{ neutron.message_queue.user }}
+rabbit_password = {{ neutron.message_queue.password }}
+rabbit_virtual_host = {{ neutron.message_queue.virtual_host }}
+
+
+rabbit_retry_interval = 1
+
+rabbit_retry_backoff = 2
+
+rabbit_max_retries = 0
+
+# Use HA queues in RabbitMQ (x-ha-policy: all). If you change this option, you
+# must wipe the RabbitMQ database. (boolean value)
+# Deprecated group/name - [DEFAULT]/rabbit_ha_queues
+# rabbit_ha_queues = false
+
+# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake (boolean value)
+# Deprecated group/name - [DEFAULT]/fake_rabbit
+# fake_rabbit = false
+[QUOTAS]
+quota_network = -1
+quota_subnet = -1
+quota_port = -1
+
+[NOVA]
+vif_types = vrouter
+
+[service_providers]
+service_provider = LOADBALANCER:Opencontrail:neutron_plugin_contrail.plugins.opencontrail.loadbalancer.driver.OpencontrailLoadbalancerDriver:default
diff --git a/neutron/files/liberty/ContrailPlugin.ini b/neutron/files/liberty/ContrailPlugin.ini
new file mode 100644
index 0000000..1fed366
--- /dev/null
+++ b/neutron/files/liberty/ContrailPlugin.ini
@@ -0,0 +1,15 @@
+{% from "neutron/map.jinja" import server with context %}
+{% from "opencontrail/map.jinja" import config with context %}
+[APISERVER]
+api_server_ip = {{ config.discovery.host }}
+api_server_port = 8082
+multi_tenancy = True
+contrail_extensions = ipam:neutron_plugin_contrail.plugins.opencontrail.contrail_plugin_ipam.NeutronPluginContrailIpam,policy:neutron_plugin_contrail.plugins.opencontrail.contrail_plugin_policy.NeutronPluginContrailPolicy,route-table:neutron_plugin_contrail.plugins.opencontrail.contrail_plugin_vpc.NeutronPluginContrailVpc,contrail:None
+
+[KEYSTONE]
+auth_url = http://{{ config.identity.host }}:35357/v2.0
+admin_token = {{ config.identity.token }}
+admin_user={{ config.identity.user }}
+admin_password={{ config.identity.password }}
+admin_tenant_name={{ config.identity.tenant }}
+
diff --git a/neutron/files/liberty/api-paste.ini.Debian b/neutron/files/liberty/api-paste.ini.Debian
new file mode 100644
index 0000000..4fa84c6
--- /dev/null
+++ b/neutron/files/liberty/api-paste.ini.Debian
@@ -0,0 +1,44 @@
+{%- if pillar.neutron.server is defined %}
+{%- set neutron = pillar.neutron.server %}
+{%- elif pillar.neutron.switch is defined %}
+{%- set neutron = pillar.neutron.switch %}
+{%- elif pillar.neutron.bridge is defined %}
+{%- set neutron = pillar.neutron.bridge %}
+{%- endif %}
+[composite:neutron]
+use = egg:Paste#urlmap
+/: neutronversions
+/v2.0: neutronapi_v2_0
+
+[composite:neutronapi_v2_0]
+use = call:neutron.auth:pipeline_factory
+noauth = request_id catch_errors extensions neutronapiapp_v2_0
+keystone = request_id catch_errors authtoken keystonecontext extensions neutronapiapp_v2_0
+
+[filter:request_id]
+paste.filter_factory = oslo_middleware:RequestId.factory
+
+[filter:catch_errors]
+paste.filter_factory = oslo_middleware:CatchErrors.factory
+
+[filter:keystonecontext]
+paste.filter_factory = neutron.auth:NeutronKeystoneContext.factory
+
+[filter:authtoken]
+paste.filter_factory = keystonemiddleware.auth_token:filter_factory
+auth_port={{ neutron.identity.port }}
+auth_protocol=http
+auth_url=http://{{ neutron.identity.host }}:{{ neutron.identity.port }}/v2.0
+auth_host={{ neutron.identity.host }}
+admin_tenant_name = {{ neutron.identity.tenant }}
+admin_user = {{ neutron.identity.user }}
+admin_password = {{ neutron.identity.password }}
+
+[filter:extensions]
+paste.filter_factory = neutron.api.extensions:plugin_aware_extension_middleware_factory
+
+[app:neutronversions]
+paste.app_factory = neutron.api.versions:Versions.factory
+
+[app:neutronapiapp_v2_0]
+paste.app_factory = neutron.api.v2.router:APIRouter.factory
diff --git a/neutron/files/liberty/api-paste.ini.RedHat b/neutron/files/liberty/api-paste.ini.RedHat
new file mode 120000
index 0000000..08fd76a
--- /dev/null
+++ b/neutron/files/liberty/api-paste.ini.RedHat
@@ -0,0 +1 @@
+api-paste.ini.Debian
\ No newline at end of file
diff --git a/neutron/files/liberty/neutron-server b/neutron/files/liberty/neutron-server
new file mode 100644
index 0000000..9b06503
--- /dev/null
+++ b/neutron/files/liberty/neutron-server
@@ -0,0 +1,16 @@
+# Generated by Salt.
+{%- from "neutron/map.jinja" import server with context %}
+
+# defaults for neutron-server
+
+# path to config file corresponding to the core_plugin specified in
+# neutron.conf
+#NEUTRON_PLUGIN_CONFIG="/etc/neutron/plugins/openvswitch/ovs_neutron_plugin.ini"
+
+{%- if server.plugin == "ml2" %}
+NEUTRON_PLUGIN_CONFIG="/etc/neutron/plugins/ml2/ml2_conf.ini"
+{%- endif %}
+
+{%- if server.plugin == "contrail" %}
+NEUTRON_PLUGIN_CONFIG="/etc/neutron/plugins/opencontrail/ContrailPlugin.ini"
+{%- endif %}
\ No newline at end of file
diff --git a/neutron/files/liberty/neutron-server.conf.contrail.Debian b/neutron/files/liberty/neutron-server.conf.contrail.Debian
new file mode 100644
index 0000000..7a657bb
--- /dev/null
+++ b/neutron/files/liberty/neutron-server.conf.contrail.Debian
@@ -0,0 +1,1030 @@
+{%- set neutron = pillar.neutron.server %}
+{%- from "neutron/map.jinja" import server with context %}
+[DEFAULT]
+# Print more verbose output (set logging level to INFO instead of default WARNING level).
+# verbose = False
+verbose = true
+
+# =========Start Global Config Option for Distributed L3 Router===============
+# Setting the "router_distributed" flag to "True" will default to the creation
+# of distributed tenant routers. The admin can override this flag by specifying
+# the type of the router on the create request (admin-only attribute). Default
+# value is "False" to support legacy mode (centralized) routers.
+#
+# router_distributed = False
+#
+# ===========End Global Config Option for Distributed L3 Router===============
+
+# Print debugging output (set logging level to DEBUG instead of default WARNING level).
+# debug = False
+
+# Where to store Neutron state files.  This directory must be writable by the
+# user executing the agent.
+# state_path = /var/lib/neutron
+state_path = /var/lib/neutron
+
+# log_format = %(asctime)s %(levelname)8s [%(name)s] %(message)s
+# log_date_format = %Y-%m-%d %H:%M:%S
+
+# use_syslog                           -> syslog
+# log_file and log_dir                 -> log_dir/log_file
+# (not log_file) and log_dir           -> log_dir/{binary_name}.log
+# use_stderr                           -> stderr
+# (not user_stderr) and (not log_file) -> stdout
+# publish_errors                       -> notification system
+
+# use_syslog = False
+# syslog_log_facility = LOG_USER
+
+# use_stderr = True
+# log_file =
+# log_dir =
+
+# publish_errors = False
+
+# Address to bind the API server to
+bind_host = {{ neutron.bind.address }}
+
+# Port the bind the API server to
+# bind_port = 9696
+bind_port = {{ neutron.bind.port }}
+
+# Path to the extensions.  Note that this can be a colon-separated list of
+# paths.  For example:
+# api_extensions_path = extensions:/path/to/more/extensions:/even/more/extensions
+# The __path__ of neutron.extensions is appended to this, so if your
+# extensions are in there you don't need to specify them here
+# api_extensions_path =
+
+# (StrOpt) Neutron core plugin entrypoint to be loaded from the
+# neutron.core_plugins namespace. See setup.cfg for the entrypoint names of the
+# plugins included in the neutron source distribution. For compatibility with
+# previous versions, the class name of a plugin can be specified instead of its
+# entrypoint name.
+#
+#core_plugin = ml2
+# Example: core_plugin = ml2
+core_plugin = neutron_plugin_contrail.plugins.opencontrail.contrail_plugin.NeutronPluginContrailCoreV2
+api_extensions_path = extensions:/usr/lib/python2.7/dist-packages/neutron_plugin_contrail/extensions
+# (ListOpt) List of service plugin entrypoints to be loaded from the
+# neutron.service_plugins namespace. See setup.cfg for the entrypoint names of
+# the plugins included in the neutron source distribution. For compatibility
+# with previous versions, the class name of a plugin can be specified instead
+# of its entrypoint name.
+#
+# service_plugins =
+# Example: service_plugins = router,firewall,lbaas,vpnaas,metering
+
+# JPAVLIK TEMPRORARY DISABLE LbaaS until Contrail fix it
+#service_plugins = neutron_plugin_contrail.plugins.opencontrail.loadbalancer.plugin.LoadBalancerPlugin
+
+# Paste configuration file
+# api_paste_config = api-paste.ini
+
+# (StrOpt) Hostname to be used by the neutron server, agents and services
+# running on this machine. All the agents and services running on this machine
+# must use the same host value.
+# The default value is hostname of the machine.
+#
+# host =
+
+# The strategy to be used for auth.
+# Supported values are 'keystone'(default), 'noauth'.
+# auth_strategy = keystone
+auth_strategy = keystone
+
+# Base MAC address. The first 3 octets will remain unchanged. If the
+# 4h octet is not 00, it will also be used. The others will be
+# randomly generated.
+# 3 octet
+# base_mac = fa:16:3e:00:00:00
+# 4 octet
+# base_mac = fa:16:3e:4f:00:00
+
+# DVR Base MAC address. The first 3 octets will remain unchanged. If the
+# 4th octet is not 00, it will also be used.  The others will be randomly
+# generated. The 'dvr_base_mac' *must* be different from 'base_mac' to
+# avoid mixing them up with MAC's allocated for tenant ports.
+# A 4 octet example would be dvr_base_mac = fa:16:3f:4f:00:00
+# The default is 3 octet
+# dvr_base_mac = fa:16:3f:00:00:00
+
+# Maximum amount of retries to generate a unique MAC address
+# mac_generation_retries = 16
+
+# DHCP Lease duration (in seconds).  Use -1 to
+# tell dnsmasq to use infinite lease times.
+# dhcp_lease_duration = 86400
+
+# Allow sending resource operation notification to DHCP agent
+# dhcp_agent_notification = True
+
+dns_domain = {{ neutron.dns_domain }}
+
+# Enable or disable bulk create/update/delete operations
+# allow_bulk = True
+# Enable or disable pagination
+# allow_pagination = False
+# Enable or disable sorting
+# allow_sorting = False
+# Enable or disable overlapping IPs for subnets
+# Attention: the following parameter MUST be set to False if Neutron is
+# being used in conjunction with nova security groups
+# allow_overlapping_ips = False
+allow_overlapping_ips = True
+# Ensure that configured gateway is on subnet. For IPv6, validate only if
+# gateway is not a link local address. Deprecated, to be removed during the
+# K release, at which point the check will be mandatory.
+# force_gateway_on_subnet = True
+
+# Default maximum number of items returned in a single response,
+# value == infinite and value < 0 means no max limit, and value must
+# be greater than 0. If the number of items requested is greater than
+# pagination_max_limit, server will just return pagination_max_limit
+# of number of items.
+# pagination_max_limit = -1
+
+# Maximum number of DNS nameservers per subnet
+# max_dns_nameservers = 5
+
+# Maximum number of host routes per subnet
+# max_subnet_host_routes = 20
+
+# Maximum number of fixed ips per port
+# max_fixed_ips_per_port = 5
+
+# Maximum number of routes per router
+# max_routes = 30
+
+# Default Subnet Pool to be used for IPv4 subnet-allocation.
+# Specifies by UUID the pool to be used in case of subnet-create being called
+# without a subnet-pool ID.  The default of None means that no pool will be
+# used unless passed explicitly to subnet create.  If no pool is used, then a
+# CIDR must be passed to create a subnet and that subnet will not be allocated
+# from any pool; it will be considered part of the tenant's private address
+# space.
+# default_ipv4_subnet_pool =
+
+# Default Subnet Pool to be used for IPv6 subnet-allocation.
+# Specifies by UUID the pool to be used in case of subnet-create being
+# called without a subnet-pool ID.  Set to "prefix_delegation"
+# to enable IPv6 Prefix Delegation in a PD-capable environment.
+# See the description for default_ipv4_subnet_pool for more information.
+# default_ipv6_subnet_pool =
+
+# =========== items for MTU selection and advertisement =============
+# Advertise MTU.  If True, effort is made to advertise MTU
+# settings to VMs via network methods (ie. DHCP and RA MTU options)
+# when the network's preferred MTU is known.
+# advertise_mtu = False
+# ======== end of items for MTU selection and advertisement =========
+
+# =========== items for agent management extension =============
+# Seconds to regard the agent as down; should be at least twice
+# report_interval, to be sure the agent is down for good
+# agent_down_time = 75
+# ===========  end of items for agent management extension =====
+
+# =========== items for agent scheduler extension =============
+# Driver to use for scheduling network to DHCP agent
+# network_scheduler_driver = neutron.scheduler.dhcp_agent_scheduler.ChanceScheduler
+# Driver to use for scheduling router to a default L3 agent
+# router_scheduler_driver = neutron.scheduler.l3_agent_scheduler.ChanceScheduler
+# Driver to use for scheduling a loadbalancer pool to an lbaas agent
+# loadbalancer_pool_scheduler_driver = neutron.services.loadbalancer.agent_scheduler.ChanceScheduler
+
+# (StrOpt) Representing the resource type whose load is being reported by
+# the agent.
+# This can be 'networks','subnets' or 'ports'. When specified (Default is networks),
+# the server will extract particular load sent as part of its agent configuration object
+# from the agent report state, which is the number of resources being consumed, at
+# every report_interval.
+# dhcp_load_type can be used in combination with network_scheduler_driver =
+# neutron.scheduler.dhcp_agent_scheduler.WeightScheduler
+# When the network_scheduler_driver is WeightScheduler, dhcp_load_type can
+# be configured to represent the choice for the resource being balanced.
+# Example: dhcp_load_type = networks
+# Values:
+#   networks - number of networks hosted on the agent
+#   subnets -  number of subnets associated with the networks hosted on the agent
+#   ports   -  number of ports associated with the networks hosted on the agent
+# dhcp_load_type = networks
+
+# Allow auto scheduling networks to DHCP agent. It will schedule non-hosted
+# networks to first DHCP agent which sends get_active_networks message to
+# neutron server
+# network_auto_schedule = True
+
+# Allow auto scheduling routers to L3 agent. It will schedule non-hosted
+# routers to first L3 agent which sends sync_routers message to neutron server
+# router_auto_schedule = True
+
+# Allow automatic rescheduling of routers from dead L3 agents with
+# admin_state_up set to True to alive agents.
+# allow_automatic_l3agent_failover = False
+
+# Allow automatic removal of networks from dead DHCP agents with
+# admin_state_up set to True.
+# Networks could then be rescheduled if network_auto_schedule is True
+# allow_automatic_dhcp_failover = True
+
+# Number of DHCP agents scheduled to host a network. This enables redundant
+# DHCP agents for configured networks.
+# dhcp_agents_per_network = 1
+
+# Enable services on agents with admin_state_up False.
+# If this option is False, when admin_state_up of an agent is turned to
+# False, services on it will be disabled. If this option is True, services
+# on agents with admin_state_up False keep available and manual scheduling
+# to such agents is available. Agents with admin_state_up False are not
+# selected for automatic scheduling regardless of this option.
+# enable_services_on_agents_with_admin_state_down = False
+
+# ===========  end of items for agent scheduler extension =====
+
+# =========== items for l3 extension ==============
+# Enable high availability for virtual routers.
+# l3_ha = False
+#
+# Maximum number of l3 agents which a HA router will be scheduled on. If it
+# is set to 0 the router will be scheduled on every agent.
+# max_l3_agents_per_router = 3
+#
+# Minimum number of l3 agents which a HA router will be scheduled on. The
+# default value is 2.
+# min_l3_agents_per_router = 2
+#
+# CIDR of the administrative network if HA mode is enabled
+# l3_ha_net_cidr = 169.254.192.0/18
+# =========== end of items for l3 extension =======
+
+# =========== items for metadata proxy configuration ==============
+# User (uid or name) running metadata proxy after its initialization
+# (if empty: agent effective user)
+# metadata_proxy_user =
+
+# Group (gid or name) running metadata proxy after its initialization
+# (if empty: agent effective group)
+# metadata_proxy_group =
+
+# Enable/Disable log watch by metadata proxy, it should be disabled when
+# metadata_proxy_user/group is not allowed to read/write its log file and
+# 'copytruncate' logrotate option must be used if logrotate is enabled on
+# metadata proxy log files. Option default value is deduced from
+# metadata_proxy_user: watch log is enabled if metadata_proxy_user is agent
+# effective user id/name.
+# metadata_proxy_watch_log =
+
+# Location of Metadata Proxy UNIX domain socket
+# metadata_proxy_socket = $state_path/metadata_proxy
+# =========== end of items for metadata proxy configuration ==============
+
+# ========== items for VLAN trunking networks ==========
+# Setting this flag to True will allow plugins that support it to
+# create VLAN transparent networks. This flag has no effect for
+# plugins that do not support VLAN transparent networks.
+# vlan_transparent = False
+# ========== end of items for VLAN trunking networks ==========
+
+# =========== WSGI parameters related to the API server ==============
+# Number of separate worker processes to spawn.  The default, 0, runs the
+# worker thread in the current process.  Greater than 0 launches that number of
+# child processes as workers.  The parent process manages them.
+# api_workers = 0
+
+# Number of separate RPC worker processes to spawn.  The default, 0, runs the
+# worker thread in the current process.  Greater than 0 launches that number of
+# child processes as RPC workers.  The parent process manages them.
+# This feature is experimental until issues are addressed and testing has been
+# enabled for various plugins for compatibility.
+# rpc_workers = 0
+
+# Timeout for client connections socket operations. If an
+# incoming connection is idle for this number of seconds it
+# will be closed. A value of '0' means wait forever. (integer
+# value)
+# client_socket_timeout = 900
+
+# wsgi keepalive option. Determines if connections are allowed to be held open
+# by clients after a request is fulfilled. A value of False will ensure that
+# the socket connection will be explicitly closed once a response has been
+# sent to the client.
+# wsgi_keep_alive = True
+
+# Sets the value of TCP_KEEPIDLE in seconds to use for each server socket when
+# starting API server. Not supported on OS X.
+# tcp_keepidle = 600
+
+# Number of seconds to keep retrying to listen
+# retry_until_window = 30
+
+# Number of backlog requests to configure the socket with.
+# backlog = 4096
+
+# Max header line to accommodate large tokens
+# max_header_line = 16384
+
+# Enable SSL on the API server
+# use_ssl = False
+
+# Certificate file to use when starting API server securely
+# ssl_cert_file = /path/to/certfile
+
+# Private key file to use when starting API server securely
+# ssl_key_file = /path/to/keyfile
+
+# CA certificate file to use when starting API server securely to
+# verify connecting clients. This is an optional parameter only required if
+# API clients need to authenticate to the API server using SSL certificates
+# signed by a trusted CA
+# ssl_ca_file = /path/to/cafile
+# ======== end of WSGI parameters related to the API server ==========
+
+# ======== neutron nova interactions ==========
+# Send notification to nova when port status is active.
+# notify_nova_on_port_status_changes = True
+notify_nova_on_port_status_changes = True
+
+# Send notifications to nova when port data (fixed_ips/floatingips) change
+# so nova can update it's cache.
+# notify_nova_on_port_data_changes = True
+# TEMPORARY BUG - cannot associate floating ips with notification port True. OpenStack Bug 
+notify_nova_on_port_data_changes = False
+
+# URL for connection to nova (Only supports one nova region currently).
+# nova_url = http://127.0.0.1:8774/v2
+nova_url = http://{{ neutron.compute.host }}:8774/v2
+
+# Name of nova region to use. Useful if keystone manages more than one region
+# nova_region_name =
+nova_region_name = {{ neutron.compute.region }}
+
+# Username for connection to nova in admin context
+# nova_admin_username =
+nova_admin_username = {{ neutron.compute.user }}
+
+# The uuid of the admin nova tenant
+# nova_admin_tenant_id =
+
+# The name of the admin nova tenant. If the uuid of the admin nova tenant
+# is set, this is optional.  Useful for cases where the uuid of the admin
+# nova tenant is not available when configuration is being done.
+# nova_admin_tenant_name =
+nova_admin_tenant_name = {{ neutron.compute.tenant }}
+
+# Password for connection to nova in admin context.
+# nova_admin_password =
+nova_admin_password = {{ neutron.compute.password }}
+
+# Authorization URL for connection to nova in admin context.
+# nova_admin_auth_url =
+nova_admin_auth_url = http://{{ neutron.identity.host }}:35357
+
+# CA file for novaclient to verify server certificates
+# nova_ca_certificates_file =
+
+# Boolean to control ignoring SSL errors on the nova url
+# nova_api_insecure = False
+
+# Number of seconds between sending events to nova if there are any events to send
+# send_events_interval = 2
+send_events_interval = 2
+
+# ======== end of neutron nova interactions ==========
+
+#
+# Options defined in oslo.messaging
+#
+
+# Use durable queues in amqp. (boolean value)
+# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
+# amqp_durable_queues=false
+
+# Auto-delete queues in amqp. (boolean value)
+# amqp_auto_delete=false
+
+# Size of RPC connection pool. (integer value)
+# rpc_conn_pool_size=30
+
+# Qpid broker hostname. (string value)
+# qpid_hostname=localhost
+
+# Qpid broker port. (integer value)
+# qpid_port=5672
+
+# Qpid HA cluster host:port pairs. (list value)
+# qpid_hosts=$qpid_hostname:$qpid_port
+
+# Username for Qpid connection. (string value)
+# qpid_username=
+
+# Password for Qpid connection. (string value)
+# qpid_password=
+
+# Space separated list of SASL mechanisms to use for auth.
+# (string value)
+# qpid_sasl_mechanisms=
+
+# Seconds between connection keepalive heartbeats. (integer
+# value)
+# qpid_heartbeat=60
+
+# Transport to use, either 'tcp' or 'ssl'. (string value)
+# qpid_protocol=tcp
+
+# Whether to disable the Nagle algorithm. (boolean value)
+# qpid_tcp_nodelay=true
+
+# The qpid topology version to use.  Version 1 is what was
+# originally used by impl_qpid.  Version 2 includes some
+# backwards-incompatible changes that allow broker federation
+# to work.  Users should update to version 2 when they are
+# able to take everything down, as it requires a clean break.
+# (integer value)
+# qpid_topology_version=1
+
+# SSL version to use (valid only if SSL enabled). valid values
+# are TLSv1, SSLv23 and SSLv3. SSLv2 may be available on some
+# distributions. (string value)
+# kombu_ssl_version=
+
+# SSL key file (valid only if SSL enabled). (string value)
+# kombu_ssl_keyfile=
+
+# SSL cert file (valid only if SSL enabled). (string value)
+# kombu_ssl_certfile=
+
+# SSL certification authority file (valid only if SSL
+# enabled). (string value)
+# kombu_ssl_ca_certs=
+
+# How long to wait before reconnecting in response to an AMQP
+# consumer cancel notification. (floating point value)
+# kombu_reconnect_delay=1.0
+
+# The RabbitMQ broker address where a single node is used.
+# (string value)
+# rabbit_host=localhost
+
+# The RabbitMQ broker port where a single node is used.
+# (integer value)
+# rabbit_port=5672
+
+# RabbitMQ HA cluster host:port pairs. (list value)
+# rabbit_hosts=$rabbit_host:$rabbit_port
+
+# Connect over SSL for RabbitMQ. (boolean value)
+# rabbit_use_ssl=false
+
+# The RabbitMQ userid. (string value)
+# rabbit_userid=guest
+
+# The RabbitMQ password. (string value)
+# rabbit_password=guest
+
+# the RabbitMQ login method (string value)
+# rabbit_login_method=AMQPLAIN
+
+# The RabbitMQ virtual host. (string value)
+# rabbit_virtual_host=/
+
+# How frequently to retry connecting with RabbitMQ. (integer
+# value)
+# rabbit_retry_interval=1
+
+# How long to backoff for between retries when connecting to
+# RabbitMQ. (integer value)
+# rabbit_retry_backoff=2
+
+# Maximum number of RabbitMQ connection retries. Default is 0
+# (infinite retry count). (integer value)
+# rabbit_max_retries=0
+
+# Use HA queues in RabbitMQ (x-ha-policy: all). If you change
+# this option, you must wipe the RabbitMQ database. (boolean
+# value)
+# rabbit_ha_queues=false
+
+# If passed, use a fake RabbitMQ provider. (boolean value)
+# fake_rabbit=false
+
+# ZeroMQ bind address. Should be a wildcard (*), an ethernet
+# interface, or IP. The "host" option should point or resolve
+# to this address. (string value)
+# rpc_zmq_bind_address=*
+
+# MatchMaker driver. (string value)
+# rpc_zmq_matchmaker=oslo.messaging._drivers.matchmaker.MatchMakerLocalhost
+
+# ZeroMQ receiver listening port. (integer value)
+# rpc_zmq_port=9501
+
+# Number of ZeroMQ contexts, defaults to 1. (integer value)
+# rpc_zmq_contexts=1
+
+# Maximum number of ingress messages to locally buffer per
+# topic. Default is unlimited. (integer value)
+# rpc_zmq_topic_backlog=
+
+# Directory for holding IPC sockets. (string value)
+# rpc_zmq_ipc_dir=/var/run/openstack
+
+# Name of this node. Must be a valid hostname, FQDN, or IP
+# address. Must match "host" option, if running Nova. (string
+# value)
+# rpc_zmq_host=oslo
+
+# Seconds to wait before a cast expires (TTL). Only supported
+# by impl_zmq. (integer value)
+# rpc_cast_timeout=30
+rpc_cast_timeout=30
+
+# Heartbeat frequency. (integer value)
+# matchmaker_heartbeat_freq=300
+
+# Heartbeat time-to-live. (integer value)
+# matchmaker_heartbeat_ttl=600
+
+# Size of RPC greenthread pool. (integer value)
+# rpc_thread_pool_size=64
+rpc_thread_pool_size=70
+
+# Driver or drivers to handle sending notifications. (multi
+# valued)
+# notification_driver=
+{%- if server.notification %}
+notification_driver = neutron.openstack.common.notifier.rpc_notifier
+{%- endif %}
+# AMQP topic used for OpenStack notifications. (list value)
+# Deprecated group/name - [rpc_notifier2]/topics
+# notification_topics=notifications
+
+# Seconds to wait for a response from a call. (integer value)
+# rpc_response_timeout=60
+rpc_response_timeout=60
+
+# A URL representing the messaging driver to use and its full
+# configuration. If not set, we fall back to the rpc_backend
+# option and driver specific configuration. (string value)
+# transport_url=
+
+# The messaging driver to use, defaults to rabbit. Other
+# drivers include qpid and zmq. (string value)
+# rpc_backend=rabbit
+rpc_backend=rabbit
+
+# The default exchange under which topics are scoped. May be
+# overridden by an exchange name specified in the
+# transport_url option. (string value)
+# control_exchange=openstack
+
+
+[matchmaker_redis]
+
+#
+# Options defined in oslo.messaging
+#
+
+# Host to locate redis. (string value)
+# host=127.0.0.1
+
+# Use this port to connect to redis host. (integer value)
+# port=6379
+
+# Password for Redis server (optional). (string value)
+# password=
+
+
+[matchmaker_ring]
+
+#
+# Options defined in oslo.messaging
+#
+
+# Matchmaker ring file (JSON). (string value)
+# Deprecated group/name - [DEFAULT]/matchmaker_ringfile
+# ringfile=/etc/oslo/matchmaker_ring.json
+
+[quotas]
+# Default driver to use for quota checks
+# quota_driver = neutron.db.quota_db.DbQuotaDriver
+quota_driver = neutron_plugin_contrail.plugins.opencontrail.quota.driver.QuotaDriver
+
+# Resource name(s) that are supported in quota features
+# quota_items = network,subnet,port
+
+# Default number of resource allowed per tenant. A negative value means
+# unlimited.
+# default_quota = -1
+
+# Number of networks allowed per tenant. A negative value means unlimited.
+# quota_network = 10
+
+# Number of subnets allowed per tenant. A negative value means unlimited.
+# quota_subnet = 10
+
+# Number of ports allowed per tenant. A negative value means unlimited.
+# quota_port = 50
+
+# Number of security groups allowed per tenant. A negative value means
+# unlimited.
+# quota_security_group = 10
+
+# Number of security group rules allowed per tenant. A negative value means
+# unlimited.
+# quota_security_group_rule = 100
+
+# Number of vips allowed per tenant. A negative value means unlimited.
+# quota_vip = 10
+
+# Number of pools allowed per tenant. A negative value means unlimited.
+# quota_pool = 10
+
+# Number of pool members allowed per tenant. A negative value means unlimited.
+# The default is unlimited because a member is not a real resource consumer
+# on Openstack. However, on back-end, a member is a resource consumer
+# and that is the reason why quota is possible.
+# quota_member = -1
+
+# Number of health monitors allowed per tenant. A negative value means
+# unlimited.
+# The default is unlimited because a health monitor is not a real resource
+# consumer on Openstack. However, on back-end, a member is a resource consumer
+# and that is the reason why quota is possible.
+# quota_health_monitor = -1
+
+# Number of loadbalancers allowed per tenant. A negative value means unlimited.
+# quota_loadbalancer = 10
+
+# Number of listeners allowed per tenant. A negative value means unlimited.
+# quota_listener = -1
+
+# Number of v2 health monitors allowed per tenant. A negative value means
+# unlimited. These health monitors exist under the lbaas v2 API
+# quota_healthmonitor = -1
+
+# Number of routers allowed per tenant. A negative value means unlimited.
+# quota_router = 10
+
+# Number of floating IPs allowed per tenant. A negative value means unlimited.
+# quota_floatingip = 50
+
+# Number of firewalls allowed per tenant. A negative value means unlimited.
+# quota_firewall = 1
+
+# Number of firewall policies allowed per tenant. A negative value means
+# unlimited.
+# quota_firewall_policy = 1
+
+# Number of firewall rules allowed per tenant. A negative value means
+# unlimited.
+# quota_firewall_rule = 100
+
+[agent]
+# Use "sudo neutron-rootwrap /etc/neutron/rootwrap.conf" to use the real
+# root filter facility.
+# Change to "sudo" to skip the filtering and just run the command directly
+root_helper = sudo /usr/bin/neutron-rootwrap /etc/neutron/rootwrap.conf
+
+# Set to true to add comments to generated iptables rules that describe
+# each rule's purpose. (System must support the iptables comments module.)
+# comment_iptables_rules = True
+
+# Root helper daemon application to use when possible.
+# root_helper_daemon =
+
+# Use the root helper when listing the namespaces on a system. This may not
+# be required depending on the security configuration. If the root helper is
+# not required, set this to False for a performance improvement.
+# use_helper_for_ns_read = True
+
+# The interval to check external processes for failure in seconds (0=disabled)
+# check_child_processes_interval = 60
+
+# Action to take when an external process spawned by an agent dies
+# Values:
+#   respawn - Respawns the external process
+#   exit - Exits the agent
+# check_child_processes_action = respawn
+
+# =========== items for agent management extension =============
+# seconds between nodes reporting state to server; should be less than
+# agent_down_time, best if it is half or less than agent_down_time
+# report_interval = 30
+
+# ===========  end of items for agent management extension =====
+
+[keystone_authtoken]
+
+identity_uri = http://{{ neutron.identity.host }}:5000
+auth_host = {{ neutron.identity.host }}
+auth_port = {{ neutron.identity.port }}
+auth_protocol = http
+admin_tenant_name = {{ neutron.identity.tenant }}
+admin_user = {{ neutron.identity.user }}
+admin_password = {{ neutron.identity.password }}
+auth_uri=http://{{ neutron.identity.host }}:5000
+auth_url=http://{{ neutron.identity.host }}:35357
+auth_region={{ neutron.identity.region }}
+
+[database]
+# This line MUST be changed to actually run the plugin.
+# Example:
+connection = sqlite:////var/lib/neutron/neutron.sqlite
+# Replace 127.0.0.1 above with the IP address of the database used by the
+# main neutron server. (Leave it as is if the database runs on this host.)
+# connection = sqlite://
+# NOTE: In deployment the [database] section and its connection attribute may
+# be set in the corresponding core plugin '.ini' file. However, it is suggested
+# to put the [database] section and its connection attribute in this
+# configuration file.
+
+# Database engine for which script will be generated when using offline
+# migration
+# engine =
+
+# The SQLAlchemy connection string used to connect to the slave database
+# slave_connection =
+
+# Database reconnection retry times - in event connectivity is lost
+# set to -1 implies an infinite retry count
+# max_retries = 10
+
+# Database reconnection interval in seconds - if the initial connection to the
+# database fails
+# retry_interval = 10
+
+# Minimum number of SQL connections to keep open in a pool
+# min_pool_size = 1
+
+# Maximum number of SQL connections to keep open in a pool
+# max_pool_size = 10
+
+# Timeout in seconds before idle sql connections are reaped
+# idle_timeout = 3600
+
+# If set, use this value for max_overflow with sqlalchemy
+# max_overflow = 20
+
+# Verbosity of SQL debugging information. 0=None, 100=Everything
+# connection_debug = 0
+
+# Add python stack traces to SQL as comment strings
+# connection_trace = False
+
+# If set, use this value for pool_timeout with sqlalchemy
+# pool_timeout = 10
+
+[nova]
+# Name of the plugin to load
+# auth_plugin =
+auth_plugin = password
+
+# Config Section from which to load plugin specific options
+# auth_section =
+
+# PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# cafile =
+
+# PEM encoded client certificate cert file
+# certfile =
+
+# Verify HTTPS connections.
+# insecure = False
+
+# PEM encoded client certificate key file
+# keyfile =
+
+# Name of nova region to use. Useful if keystone manages more than one region.
+# region_name =
+
+# Timeout value for http requests
+# timeout =
+
+[oslo_concurrency]
+
+# Directory to use for lock files. For security, the specified directory should
+# only be writable by the user running the processes that need locking.
+# Defaults to environment variable OSLO_LOCK_PATH. If external locks are used,
+# a lock path must be set.
+lock_path = $state_path/lock
+
+# Enables or disables inter-process locks.
+# disable_process_locking = False
+
+[oslo_policy]
+
+# The JSON file that defines policies.
+# policy_file = policy.json
+
+# Default rule. Enforced when a requested rule is not found.
+# policy_default_rule = default
+
+# Directories where policy configuration files are stored.
+# They can be relative to any directory in the search path defined by the
+# config_dir option, or absolute paths. The file defined by policy_file
+# must exist for these directories to be searched. Missing or empty
+# directories are ignored.
+# policy_dirs = policy.d
+
+[oslo_messaging_amqp]
+
+#
+# From oslo.messaging
+#
+
+# Address prefix used when sending to a specific server (string value)
+# Deprecated group/name - [amqp1]/server_request_prefix
+# server_request_prefix = exclusive
+
+# Address prefix used when broadcasting to all servers (string value)
+# Deprecated group/name - [amqp1]/broadcast_prefix
+# broadcast_prefix = broadcast
+
+# Address prefix when sending to any server in group (string value)
+# Deprecated group/name - [amqp1]/group_request_prefix
+# group_request_prefix = unicast
+
+# Name for the AMQP container (string value)
+# Deprecated group/name - [amqp1]/container_name
+# container_name =
+
+# Timeout for inactive connections (in seconds) (integer value)
+# Deprecated group/name - [amqp1]/idle_timeout
+# idle_timeout = 0
+
+# Debug: dump AMQP frames to stdout (boolean value)
+# Deprecated group/name - [amqp1]/trace
+# trace = false
+
+# CA certificate PEM file for verifing server certificate (string value)
+# Deprecated group/name - [amqp1]/ssl_ca_file
+# ssl_ca_file =
+
+# Identifying certificate PEM file to present to clients (string value)
+# Deprecated group/name - [amqp1]/ssl_cert_file
+# ssl_cert_file =
+
+# Private key PEM file used to sign cert_file certificate (string value)
+# Deprecated group/name - [amqp1]/ssl_key_file
+# ssl_key_file =
+
+# Password for decrypting ssl_key_file (if encrypted) (string value)
+# Deprecated group/name - [amqp1]/ssl_key_password
+# ssl_key_password =
+
+# Accept clients using either SSL or plain TCP (boolean value)
+# Deprecated group/name - [amqp1]/allow_insecure_clients
+# allow_insecure_clients = false
+
+
+[oslo_messaging_qpid]
+
+#
+# From oslo.messaging
+#
+
+# Use durable queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
+# amqp_durable_queues = false
+
+# Auto-delete queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/amqp_auto_delete
+# amqp_auto_delete = false
+
+# Size of RPC connection pool. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_conn_pool_size
+# rpc_conn_pool_size = 30
+
+# Qpid broker hostname. (string value)
+# Deprecated group/name - [DEFAULT]/qpid_hostname
+# qpid_hostname = localhost
+
+# Qpid broker port. (integer value)
+# Deprecated group/name - [DEFAULT]/qpid_port
+# qpid_port = 5672
+
+# Qpid HA cluster host:port pairs. (list value)
+# Deprecated group/name - [DEFAULT]/qpid_hosts
+# qpid_hosts = $qpid_hostname:$qpid_port
+
+# Username for Qpid connection. (string value)
+# Deprecated group/name - [DEFAULT]/qpid_username
+# qpid_username =
+
+# Password for Qpid connection. (string value)
+# Deprecated group/name - [DEFAULT]/qpid_password
+# qpid_password =
+
+# Space separated list of SASL mechanisms to use for auth. (string value)
+# Deprecated group/name - [DEFAULT]/qpid_sasl_mechanisms
+# qpid_sasl_mechanisms =
+
+# Seconds between connection keepalive heartbeats. (integer value)
+# Deprecated group/name - [DEFAULT]/qpid_heartbeat
+# qpid_heartbeat = 60
+
+# Transport to use, either 'tcp' or 'ssl'. (string value)
+# Deprecated group/name - [DEFAULT]/qpid_protocol
+# qpid_protocol = tcp
+
+# Whether to disable the Nagle algorithm. (boolean value)
+# Deprecated group/name - [DEFAULT]/qpid_tcp_nodelay
+# qpid_tcp_nodelay = true
+
+# The number of prefetched messages held by receiver. (integer value)
+# Deprecated group/name - [DEFAULT]/qpid_receiver_capacity
+# qpid_receiver_capacity = 1
+
+# The qpid topology version to use.  Version 1 is what was originally used by
+# impl_qpid.  Version 2 includes some backwards-incompatible changes that allow
+# broker federation to work.  Users should update to version 2 when they are
+# able to take everything down, as it requires a clean break. (integer value)
+# Deprecated group/name - [DEFAULT]/qpid_topology_version
+# qpid_topology_version = 1
+
+
+[oslo_messaging_rabbit]
+
+#
+# From oslo.messaging
+#
+
+# Use durable queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
+# amqp_durable_queues = false
+
+# Auto-delete queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/amqp_auto_delete
+# amqp_auto_delete = false
+
+# Size of RPC connection pool. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_conn_pool_size
+rpc_conn_pool_size = 40
+
+# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
+# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
+# distributions. (string value)
+# Deprecated group/name - [DEFAULT]/kombu_ssl_version
+# kombu_ssl_version =
+
+# SSL key file (valid only if SSL enabled). (string value)
+# Deprecated group/name - [DEFAULT]/kombu_ssl_keyfile
+# kombu_ssl_keyfile =
+
+# SSL cert file (valid only if SSL enabled). (string value)
+# Deprecated group/name - [DEFAULT]/kombu_ssl_certfile
+# kombu_ssl_certfile =
+
+# SSL certification authority file (valid only if SSL enabled). (string value)
+# Deprecated group/name - [DEFAULT]/kombu_ssl_ca_certs
+# kombu_ssl_ca_certs =
+
+# How long to wait before reconnecting in response to an AMQP consumer cancel
+# notification. (floating point value)
+# Deprecated group/name - [DEFAULT]/kombu_reconnect_delay
+# kombu_reconnect_delay = 1.0
+
+# The RabbitMQ broker address where a single node is used. (string value)
+# Deprecated group/name - [DEFAULT]/rabbit_host
+# rabbit_host = localhost
+
+{%- if server.message_queue.members is defined %}
+rabbit_hosts = {% for member in server.message_queue.members -%}
+                   {{ member.host }}:{{ member.get('port', 5672) }}
+                   {%- if not loop.last -%},{%- endif -%}
+               {%- endfor -%}
+{%- else %}
+rabbit_host = {{ server.message_queue.host }}
+rabbit_port = {{ server.message_queue.port }}
+{%- endif %}
+
+rabbit_userid = {{ neutron.message_queue.user }}
+rabbit_password = {{ neutron.message_queue.password }}
+rabbit_virtual_host = {{ neutron.message_queue.virtual_host }}
+
+
+rabbit_retry_interval = 1
+
+rabbit_retry_backoff = 2
+
+rabbit_max_retries = 0
+
+# Use HA queues in RabbitMQ (x-ha-policy: all). If you change this option, you
+# must wipe the RabbitMQ database. (boolean value)
+# Deprecated group/name - [DEFAULT]/rabbit_ha_queues
+# rabbit_ha_queues = false
+
+# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake (boolean value)
+# Deprecated group/name - [DEFAULT]/fake_rabbit
+# fake_rabbit = false
+[QUOTAS]
+quota_network = -1
+quota_subnet = -1
+quota_port = -1
+
+[NOVA]
+vif_types = vrouter
+
+[service_providers]
+service_provider = LOADBALANCER:Opencontrail:neutron_plugin_contrail.plugins.opencontrail.loadbalancer.driver.OpencontrailLoadbalancerDriver:default
diff --git a/neutron/files/liberty/neutron-server.conf.contrail.RedHat b/neutron/files/liberty/neutron-server.conf.contrail.RedHat
new file mode 100644
index 0000000..75e8d5b
--- /dev/null
+++ b/neutron/files/liberty/neutron-server.conf.contrail.RedHat
@@ -0,0 +1,1029 @@
+{%- set neutron = pillar.neutron.server %}
+{%- from "neutron/map.jinja" import server with context %}
+[DEFAULT]
+# Print more verbose output (set logging level to INFO instead of default WARNING level).
+# verbose = False
+verbose = true
+
+# =========Start Global Config Option for Distributed L3 Router===============
+# Setting the "router_distributed" flag to "True" will default to the creation
+# of distributed tenant routers. The admin can override this flag by specifying
+# the type of the router on the create request (admin-only attribute). Default
+# value is "False" to support legacy mode (centralized) routers.
+#
+# router_distributed = False
+#
+# ===========End Global Config Option for Distributed L3 Router===============
+
+# Print debugging output (set logging level to DEBUG instead of default WARNING level).
+# debug = False
+
+# Where to store Neutron state files.  This directory must be writable by the
+# user executing the agent.
+# state_path = /var/lib/neutron
+state_path = /var/lib/neutron
+
+# log_format = %(asctime)s %(levelname)8s [%(name)s] %(message)s
+# log_date_format = %Y-%m-%d %H:%M:%S
+
+# use_syslog                           -> syslog
+# log_file and log_dir                 -> log_dir/log_file
+# (not log_file) and log_dir           -> log_dir/{binary_name}.log
+# use_stderr                           -> stderr
+# (not user_stderr) and (not log_file) -> stdout
+# publish_errors                       -> notification system
+
+# use_syslog = False
+# syslog_log_facility = LOG_USER
+
+# use_stderr = True
+# log_file =
+# log_dir =
+
+# publish_errors = False
+
+# Address to bind the API server to
+bind_host = {{ neutron.bind.address }}
+
+# Port the bind the API server to
+# bind_port = 9696
+bind_port = {{ neutron.bind.port }}
+
+# Path to the extensions.  Note that this can be a colon-separated list of
+# paths.  For example:
+# api_extensions_path = extensions:/path/to/more/extensions:/even/more/extensions
+# The __path__ of neutron.extensions is appended to this, so if your
+# extensions are in there you don't need to specify them here
+# api_extensions_path =
+
+# (StrOpt) Neutron core plugin entrypoint to be loaded from the
+# neutron.core_plugins namespace. See setup.cfg for the entrypoint names of the
+# plugins included in the neutron source distribution. For compatibility with
+# previous versions, the class name of a plugin can be specified instead of its
+# entrypoint name.
+#
+#core_plugin = ml2
+# Example: core_plugin = ml2
+core_plugin = neutron_plugin_contrail.plugins.opencontrail.contrail_plugin.NeutronPluginContrailCoreV2
+api_extensions_path = extensions:/usr/lib/python2.7/site-packages/neutron_plugin_contrail/extensions
+# (ListOpt) List of service plugin entrypoints to be loaded from the
+# neutron.service_plugins namespace. See setup.cfg for the entrypoint names of
+# the plugins included in the neutron source distribution. For compatibility
+# with previous versions, the class name of a plugin can be specified instead
+# of its entrypoint name.
+#
+# service_plugins =
+# Example: service_plugins = router,firewall,lbaas,vpnaas,metering
+
+# JPAVLIK TEMPRORARY DISABLE LbaaS until Contrail fix it
+#service_plugins = neutron_plugin_contrail.plugins.opencontrail.loadbalancer.plugin.LoadBalancerPlugin
+
+# Paste configuration file
+# api_paste_config = api-paste.ini
+
+# (StrOpt) Hostname to be used by the neutron server, agents and services
+# running on this machine. All the agents and services running on this machine
+# must use the same host value.
+# The default value is hostname of the machine.
+#
+# host =
+
+# The strategy to be used for auth.
+# Supported values are 'keystone'(default), 'noauth'.
+# auth_strategy = keystone
+auth_strategy = keystone
+
+# Base MAC address. The first 3 octets will remain unchanged. If the
+# 4h octet is not 00, it will also be used. The others will be
+# randomly generated.
+# 3 octet
+# base_mac = fa:16:3e:00:00:00
+# 4 octet
+# base_mac = fa:16:3e:4f:00:00
+
+# DVR Base MAC address. The first 3 octets will remain unchanged. If the
+# 4th octet is not 00, it will also be used.  The others will be randomly
+# generated. The 'dvr_base_mac' *must* be different from 'base_mac' to
+# avoid mixing them up with MAC's allocated for tenant ports.
+# A 4 octet example would be dvr_base_mac = fa:16:3f:4f:00:00
+# The default is 3 octet
+# dvr_base_mac = fa:16:3f:00:00:00
+
+# Maximum amount of retries to generate a unique MAC address
+# mac_generation_retries = 16
+
+# DHCP Lease duration (in seconds).  Use -1 to
+# tell dnsmasq to use infinite lease times.
+# dhcp_lease_duration = 86400
+
+# Allow sending resource operation notification to DHCP agent
+# dhcp_agent_notification = True
+
+dns_domain = {{ neutron.dns_domain }}
+
+# Enable or disable bulk create/update/delete operations
+# allow_bulk = True
+# Enable or disable pagination
+# allow_pagination = False
+# Enable or disable sorting
+# allow_sorting = False
+# Enable or disable overlapping IPs for subnets
+# Attention: the following parameter MUST be set to False if Neutron is
+# being used in conjunction with nova security groups
+# allow_overlapping_ips = False
+allow_overlapping_ips = True
+# Ensure that configured gateway is on subnet. For IPv6, validate only if
+# gateway is not a link local address. Deprecated, to be removed during the
+# K release, at which point the check will be mandatory.
+# force_gateway_on_subnet = True
+
+# Default maximum number of items returned in a single response,
+# value == infinite and value < 0 means no max limit, and value must
+# be greater than 0. If the number of items requested is greater than
+# pagination_max_limit, server will just return pagination_max_limit
+# of number of items.
+# pagination_max_limit = -1
+
+# Maximum number of DNS nameservers per subnet
+# max_dns_nameservers = 5
+
+# Maximum number of host routes per subnet
+# max_subnet_host_routes = 20
+
+# Maximum number of fixed ips per port
+# max_fixed_ips_per_port = 5
+
+# Maximum number of routes per router
+# max_routes = 30
+
+# Default Subnet Pool to be used for IPv4 subnet-allocation.
+# Specifies by UUID the pool to be used in case of subnet-create being called
+# without a subnet-pool ID.  The default of None means that no pool will be
+# used unless passed explicitly to subnet create.  If no pool is used, then a
+# CIDR must be passed to create a subnet and that subnet will not be allocated
+# from any pool; it will be considered part of the tenant's private address
+# space.
+# default_ipv4_subnet_pool =
+
+# Default Subnet Pool to be used for IPv6 subnet-allocation.
+# Specifies by UUID the pool to be used in case of subnet-create being
+# called without a subnet-pool ID.  Set to "prefix_delegation"
+# to enable IPv6 Prefix Delegation in a PD-capable environment.
+# See the description for default_ipv4_subnet_pool for more information.
+# default_ipv6_subnet_pool =
+
+# =========== items for MTU selection and advertisement =============
+# Advertise MTU.  If True, effort is made to advertise MTU
+# settings to VMs via network methods (ie. DHCP and RA MTU options)
+# when the network's preferred MTU is known.
+# advertise_mtu = False
+# ======== end of items for MTU selection and advertisement =========
+
+# =========== items for agent management extension =============
+# Seconds to regard the agent as down; should be at least twice
+# report_interval, to be sure the agent is down for good
+# agent_down_time = 75
+# ===========  end of items for agent management extension =====
+
+# =========== items for agent scheduler extension =============
+# Driver to use for scheduling network to DHCP agent
+# network_scheduler_driver = neutron.scheduler.dhcp_agent_scheduler.ChanceScheduler
+# Driver to use for scheduling router to a default L3 agent
+# router_scheduler_driver = neutron.scheduler.l3_agent_scheduler.ChanceScheduler
+# Driver to use for scheduling a loadbalancer pool to an lbaas agent
+# loadbalancer_pool_scheduler_driver = neutron.services.loadbalancer.agent_scheduler.ChanceScheduler
+
+# (StrOpt) Representing the resource type whose load is being reported by
+# the agent.
+# This can be 'networks','subnets' or 'ports'. When specified (Default is networks),
+# the server will extract particular load sent as part of its agent configuration object
+# from the agent report state, which is the number of resources being consumed, at
+# every report_interval.
+# dhcp_load_type can be used in combination with network_scheduler_driver =
+# neutron.scheduler.dhcp_agent_scheduler.WeightScheduler
+# When the network_scheduler_driver is WeightScheduler, dhcp_load_type can
+# be configured to represent the choice for the resource being balanced.
+# Example: dhcp_load_type = networks
+# Values:
+#   networks - number of networks hosted on the agent
+#   subnets -  number of subnets associated with the networks hosted on the agent
+#   ports   -  number of ports associated with the networks hosted on the agent
+# dhcp_load_type = networks
+
+# Allow auto scheduling networks to DHCP agent. It will schedule non-hosted
+# networks to first DHCP agent which sends get_active_networks message to
+# neutron server
+# network_auto_schedule = True
+
+# Allow auto scheduling routers to L3 agent. It will schedule non-hosted
+# routers to first L3 agent which sends sync_routers message to neutron server
+# router_auto_schedule = True
+
+# Allow automatic rescheduling of routers from dead L3 agents with
+# admin_state_up set to True to alive agents.
+# allow_automatic_l3agent_failover = False
+
+# Allow automatic removal of networks from dead DHCP agents with
+# admin_state_up set to True.
+# Networks could then be rescheduled if network_auto_schedule is True
+# allow_automatic_dhcp_failover = True
+
+# Number of DHCP agents scheduled to host a network. This enables redundant
+# DHCP agents for configured networks.
+# dhcp_agents_per_network = 1
+
+# Enable services on agents with admin_state_up False.
+# If this option is False, when admin_state_up of an agent is turned to
+# False, services on it will be disabled. If this option is True, services
+# on agents with admin_state_up False keep available and manual scheduling
+# to such agents is available. Agents with admin_state_up False are not
+# selected for automatic scheduling regardless of this option.
+# enable_services_on_agents_with_admin_state_down = False
+
+# ===========  end of items for agent scheduler extension =====
+
+# =========== items for l3 extension ==============
+# Enable high availability for virtual routers.
+# l3_ha = False
+#
+# Maximum number of l3 agents which a HA router will be scheduled on. If it
+# is set to 0 the router will be scheduled on every agent.
+# max_l3_agents_per_router = 3
+#
+# Minimum number of l3 agents which a HA router will be scheduled on. The
+# default value is 2.
+# min_l3_agents_per_router = 2
+#
+# CIDR of the administrative network if HA mode is enabled
+# l3_ha_net_cidr = 169.254.192.0/18
+# =========== end of items for l3 extension =======
+
+# =========== items for metadata proxy configuration ==============
+# User (uid or name) running metadata proxy after its initialization
+# (if empty: agent effective user)
+# metadata_proxy_user =
+
+# Group (gid or name) running metadata proxy after its initialization
+# (if empty: agent effective group)
+# metadata_proxy_group =
+
+# Enable/Disable log watch by metadata proxy, it should be disabled when
+# metadata_proxy_user/group is not allowed to read/write its log file and
+# 'copytruncate' logrotate option must be used if logrotate is enabled on
+# metadata proxy log files. Option default value is deduced from
+# metadata_proxy_user: watch log is enabled if metadata_proxy_user is agent
+# effective user id/name.
+# metadata_proxy_watch_log =
+
+# Location of Metadata Proxy UNIX domain socket
+# metadata_proxy_socket = $state_path/metadata_proxy
+# =========== end of items for metadata proxy configuration ==============
+
+# ========== items for VLAN trunking networks ==========
+# Setting this flag to True will allow plugins that support it to
+# create VLAN transparent networks. This flag has no effect for
+# plugins that do not support VLAN transparent networks.
+# vlan_transparent = False
+# ========== end of items for VLAN trunking networks ==========
+
+# =========== WSGI parameters related to the API server ==============
+# Number of separate worker processes to spawn.  The default, 0, runs the
+# worker thread in the current process.  Greater than 0 launches that number of
+# child processes as workers.  The parent process manages them.
+# api_workers = 0
+
+# Number of separate RPC worker processes to spawn.  The default, 0, runs the
+# worker thread in the current process.  Greater than 0 launches that number of
+# child processes as RPC workers.  The parent process manages them.
+# This feature is experimental until issues are addressed and testing has been
+# enabled for various plugins for compatibility.
+# rpc_workers = 0
+
+# Timeout for client connections socket operations. If an
+# incoming connection is idle for this number of seconds it
+# will be closed. A value of '0' means wait forever. (integer
+# value)
+# client_socket_timeout = 900
+
+# wsgi keepalive option. Determines if connections are allowed to be held open
+# by clients after a request is fulfilled. A value of False will ensure that
+# the socket connection will be explicitly closed once a response has been
+# sent to the client.
+# wsgi_keep_alive = True
+
+# Sets the value of TCP_KEEPIDLE in seconds to use for each server socket when
+# starting API server. Not supported on OS X.
+# tcp_keepidle = 600
+
+# Number of seconds to keep retrying to listen
+# retry_until_window = 30
+
+# Number of backlog requests to configure the socket with.
+# backlog = 4096
+
+# Max header line to accommodate large tokens
+# max_header_line = 16384
+
+# Enable SSL on the API server
+# use_ssl = False
+
+# Certificate file to use when starting API server securely
+# ssl_cert_file = /path/to/certfile
+
+# Private key file to use when starting API server securely
+# ssl_key_file = /path/to/keyfile
+
+# CA certificate file to use when starting API server securely to
+# verify connecting clients. This is an optional parameter only required if
+# API clients need to authenticate to the API server using SSL certificates
+# signed by a trusted CA
+# ssl_ca_file = /path/to/cafile
+# ======== end of WSGI parameters related to the API server ==========
+
+# ======== neutron nova interactions ==========
+# Send notification to nova when port status is active.
+# notify_nova_on_port_status_changes = True
+notify_nova_on_port_status_changes = True
+
+# Send notifications to nova when port data (fixed_ips/floatingips) change
+# so nova can update it's cache.
+# notify_nova_on_port_data_changes = True
+# TEMPORARY BUG - cannot associate floating ips with notification port True. OpenStack Bug 
+notify_nova_on_port_data_changes = False
+
+# URL for connection to nova (Only supports one nova region currently).
+# nova_url = http://127.0.0.1:8774/v2
+nova_url = http://{{ neutron.compute.host }}:8774/v2
+
+# Name of nova region to use. Useful if keystone manages more than one region
+# nova_region_name =
+nova_region_name = {{ neutron.compute.region }}
+
+# Username for connection to nova in admin context
+# nova_admin_username =
+nova_admin_username = {{ neutron.compute.user }}
+
+# The uuid of the admin nova tenant
+# nova_admin_tenant_id =
+
+# The name of the admin nova tenant. If the uuid of the admin nova tenant
+# is set, this is optional.  Useful for cases where the uuid of the admin
+# nova tenant is not available when configuration is being done.
+# nova_admin_tenant_name =
+nova_admin_tenant_name = {{ neutron.compute.tenant }}
+
+# Password for connection to nova in admin context.
+# nova_admin_password =
+nova_admin_password = {{ neutron.compute.password }}
+
+# Authorization URL for connection to nova in admin context.
+# nova_admin_auth_url =
+nova_admin_auth_url = http://{{ neutron.identity.host }}:35357
+
+# CA file for novaclient to verify server certificates
+# nova_ca_certificates_file =
+
+# Boolean to control ignoring SSL errors on the nova url
+# nova_api_insecure = False
+
+# Number of seconds between sending events to nova if there are any events to send
+# send_events_interval = 2
+send_events_interval = 2
+
+# ======== end of neutron nova interactions ==========
+
+#
+# Options defined in oslo.messaging
+#
+
+# Use durable queues in amqp. (boolean value)
+# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
+# amqp_durable_queues=false
+
+# Auto-delete queues in amqp. (boolean value)
+# amqp_auto_delete=false
+
+# Size of RPC connection pool. (integer value)
+# rpc_conn_pool_size=30
+
+# Qpid broker hostname. (string value)
+# qpid_hostname=localhost
+
+# Qpid broker port. (integer value)
+# qpid_port=5672
+
+# Qpid HA cluster host:port pairs. (list value)
+# qpid_hosts=$qpid_hostname:$qpid_port
+
+# Username for Qpid connection. (string value)
+# qpid_username=
+
+# Password for Qpid connection. (string value)
+# qpid_password=
+
+# Space separated list of SASL mechanisms to use for auth.
+# (string value)
+# qpid_sasl_mechanisms=
+
+# Seconds between connection keepalive heartbeats. (integer
+# value)
+# qpid_heartbeat=60
+
+# Transport to use, either 'tcp' or 'ssl'. (string value)
+# qpid_protocol=tcp
+
+# Whether to disable the Nagle algorithm. (boolean value)
+# qpid_tcp_nodelay=true
+
+# The qpid topology version to use.  Version 1 is what was
+# originally used by impl_qpid.  Version 2 includes some
+# backwards-incompatible changes that allow broker federation
+# to work.  Users should update to version 2 when they are
+# able to take everything down, as it requires a clean break.
+# (integer value)
+# qpid_topology_version=1
+
+# SSL version to use (valid only if SSL enabled). valid values
+# are TLSv1, SSLv23 and SSLv3. SSLv2 may be available on some
+# distributions. (string value)
+# kombu_ssl_version=
+
+# SSL key file (valid only if SSL enabled). (string value)
+# kombu_ssl_keyfile=
+
+# SSL cert file (valid only if SSL enabled). (string value)
+# kombu_ssl_certfile=
+
+# SSL certification authority file (valid only if SSL
+# enabled). (string value)
+# kombu_ssl_ca_certs=
+
+# How long to wait before reconnecting in response to an AMQP
+# consumer cancel notification. (floating point value)
+# kombu_reconnect_delay=1.0
+
+# The RabbitMQ broker address where a single node is used.
+# (string value)
+# rabbit_host=localhost
+
+# The RabbitMQ broker port where a single node is used.
+# (integer value)
+# rabbit_port=5672
+
+# RabbitMQ HA cluster host:port pairs. (list value)
+# rabbit_hosts=$rabbit_host:$rabbit_port
+
+# Connect over SSL for RabbitMQ. (boolean value)
+# rabbit_use_ssl=false
+
+# The RabbitMQ userid. (string value)
+# rabbit_userid=guest
+
+# The RabbitMQ password. (string value)
+# rabbit_password=guest
+
+# the RabbitMQ login method (string value)
+# rabbit_login_method=AMQPLAIN
+
+# The RabbitMQ virtual host. (string value)
+# rabbit_virtual_host=/
+
+# How frequently to retry connecting with RabbitMQ. (integer
+# value)
+# rabbit_retry_interval=1
+
+# How long to backoff for between retries when connecting to
+# RabbitMQ. (integer value)
+# rabbit_retry_backoff=2
+
+# Maximum number of RabbitMQ connection retries. Default is 0
+# (infinite retry count). (integer value)
+# rabbit_max_retries=0
+
+# Use HA queues in RabbitMQ (x-ha-policy: all). If you change
+# this option, you must wipe the RabbitMQ database. (boolean
+# value)
+# rabbit_ha_queues=false
+
+# If passed, use a fake RabbitMQ provider. (boolean value)
+# fake_rabbit=false
+
+# ZeroMQ bind address. Should be a wildcard (*), an ethernet
+# interface, or IP. The "host" option should point or resolve
+# to this address. (string value)
+# rpc_zmq_bind_address=*
+
+# MatchMaker driver. (string value)
+# rpc_zmq_matchmaker=oslo.messaging._drivers.matchmaker.MatchMakerLocalhost
+
+# ZeroMQ receiver listening port. (integer value)
+# rpc_zmq_port=9501
+
+# Number of ZeroMQ contexts, defaults to 1. (integer value)
+# rpc_zmq_contexts=1
+
+# Maximum number of ingress messages to locally buffer per
+# topic. Default is unlimited. (integer value)
+# rpc_zmq_topic_backlog=
+
+# Directory for holding IPC sockets. (string value)
+# rpc_zmq_ipc_dir=/var/run/openstack
+
+# Name of this node. Must be a valid hostname, FQDN, or IP
+# address. Must match "host" option, if running Nova. (string
+# value)
+# rpc_zmq_host=oslo
+
+# Seconds to wait before a cast expires (TTL). Only supported
+# by impl_zmq. (integer value)
+# rpc_cast_timeout=30
+rpc_cast_timeout=30
+
+# Heartbeat frequency. (integer value)
+# matchmaker_heartbeat_freq=300
+
+# Heartbeat time-to-live. (integer value)
+# matchmaker_heartbeat_ttl=600
+
+# Size of RPC greenthread pool. (integer value)
+# rpc_thread_pool_size=64
+rpc_thread_pool_size=70
+
+# Driver or drivers to handle sending notifications. (multi
+# valued)
+# notification_driver=
+{%- if server.notification %}
+notification_driver = neutron.openstack.common.notifier.rpc_notifier
+{%- endif %}
+# AMQP topic used for OpenStack notifications. (list value)
+# Deprecated group/name - [rpc_notifier2]/topics
+# notification_topics=notifications
+
+# Seconds to wait for a response from a call. (integer value)
+# rpc_response_timeout=60
+rpc_response_timeout=60
+
+# A URL representing the messaging driver to use and its full
+# configuration. If not set, we fall back to the rpc_backend
+# option and driver specific configuration. (string value)
+# transport_url=
+
+# The messaging driver to use, defaults to rabbit. Other
+# drivers include qpid and zmq. (string value)
+# rpc_backend=rabbit
+rpc_backend=rabbit
+
+# The default exchange under which topics are scoped. May be
+# overridden by an exchange name specified in the
+# transport_url option. (string value)
+# control_exchange=openstack
+
+
+[matchmaker_redis]
+
+#
+# Options defined in oslo.messaging
+#
+
+# Host to locate redis. (string value)
+# host=127.0.0.1
+
+# Use this port to connect to redis host. (integer value)
+# port=6379
+
+# Password for Redis server (optional). (string value)
+# password=
+
+
+[matchmaker_ring]
+
+#
+# Options defined in oslo.messaging
+#
+
+# Matchmaker ring file (JSON). (string value)
+# Deprecated group/name - [DEFAULT]/matchmaker_ringfile
+# ringfile=/etc/oslo/matchmaker_ring.json
+
+[quotas]
+# Default driver to use for quota checks
+# quota_driver = neutron.db.quota_db.DbQuotaDriver
+quota_driver = neutron_plugin_contrail.plugins.opencontrail.quota.driver.QuotaDriver
+
+# Resource name(s) that are supported in quota features
+# quota_items = network,subnet,port
+
+# Default number of resource allowed per tenant. A negative value means
+# unlimited.
+# default_quota = -1
+
+# Number of networks allowed per tenant. A negative value means unlimited.
+# quota_network = 10
+
+# Number of subnets allowed per tenant. A negative value means unlimited.
+# quota_subnet = 10
+
+# Number of ports allowed per tenant. A negative value means unlimited.
+# quota_port = 50
+
+# Number of security groups allowed per tenant. A negative value means
+# unlimited.
+# quota_security_group = 10
+
+# Number of security group rules allowed per tenant. A negative value means
+# unlimited.
+# quota_security_group_rule = 100
+
+# Number of vips allowed per tenant. A negative value means unlimited.
+# quota_vip = 10
+
+# Number of pools allowed per tenant. A negative value means unlimited.
+# quota_pool = 10
+
+# Number of pool members allowed per tenant. A negative value means unlimited.
+# The default is unlimited because a member is not a real resource consumer
+# on Openstack. However, on back-end, a member is a resource consumer
+# and that is the reason why quota is possible.
+# quota_member = -1
+
+# Number of health monitors allowed per tenant. A negative value means
+# unlimited.
+# The default is unlimited because a health monitor is not a real resource
+# consumer on Openstack. However, on back-end, a member is a resource consumer
+# and that is the reason why quota is possible.
+# quota_health_monitor = -1
+
+# Number of loadbalancers allowed per tenant. A negative value means unlimited.
+# quota_loadbalancer = 10
+
+# Number of listeners allowed per tenant. A negative value means unlimited.
+# quota_listener = -1
+
+# Number of v2 health monitors allowed per tenant. A negative value means
+# unlimited. These health monitors exist under the lbaas v2 API
+# quota_healthmonitor = -1
+
+# Number of routers allowed per tenant. A negative value means unlimited.
+# quota_router = 10
+
+# Number of floating IPs allowed per tenant. A negative value means unlimited.
+# quota_floatingip = 50
+
+# Number of firewalls allowed per tenant. A negative value means unlimited.
+# quota_firewall = 1
+
+# Number of firewall policies allowed per tenant. A negative value means
+# unlimited.
+# quota_firewall_policy = 1
+
+# Number of firewall rules allowed per tenant. A negative value means
+# unlimited.
+# quota_firewall_rule = 100
+
+[agent]
+# Use "sudo neutron-rootwrap /etc/neutron/rootwrap.conf" to use the real
+# root filter facility.
+# Change to "sudo" to skip the filtering and just run the command directly
+root_helper = sudo /usr/bin/neutron-rootwrap /etc/neutron/rootwrap.conf
+
+# Set to true to add comments to generated iptables rules that describe
+# each rule's purpose. (System must support the iptables comments module.)
+# comment_iptables_rules = True
+
+# Root helper daemon application to use when possible.
+# root_helper_daemon =
+
+# Use the root helper when listing the namespaces on a system. This may not
+# be required depending on the security configuration. If the root helper is
+# not required, set this to False for a performance improvement.
+# use_helper_for_ns_read = True
+
+# The interval to check external processes for failure in seconds (0=disabled)
+# check_child_processes_interval = 60
+
+# Action to take when an external process spawned by an agent dies
+# Values:
+#   respawn - Respawns the external process
+#   exit - Exits the agent
+# check_child_processes_action = respawn
+
+# =========== items for agent management extension =============
+# seconds between nodes reporting state to server; should be less than
+# agent_down_time, best if it is half or less than agent_down_time
+# report_interval = 30
+
+# ===========  end of items for agent management extension =====
+
+[keystone_authtoken]
+
+identity_uri = http://{{ neutron.identity.host }}:5000
+auth_host = {{ neutron.identity.host }}
+auth_port = {{ neutron.identity.port }}
+auth_protocol = http
+admin_tenant_name = {{ neutron.identity.tenant }}
+admin_user = {{ neutron.identity.user }}
+admin_password = {{ neutron.identity.password }}
+auth_uri=http://{{ neutron.identity.host }}:5000
+auth_url=http://{{ neutron.identity.host }}:35357
+auth_region={{ neutron.identity.region }}
+
+[database]
+# This line MUST be changed to actually run the plugin.
+# Example:
+connection = sqlite:////var/lib/neutron/neutron.sqlite
+# Replace 127.0.0.1 above with the IP address of the database used by the
+# main neutron server. (Leave it as is if the database runs on this host.)
+# connection = sqlite://
+# NOTE: In deployment the [database] section and its connection attribute may
+# be set in the corresponding core plugin '.ini' file. However, it is suggested
+# to put the [database] section and its connection attribute in this
+# configuration file.
+
+# Database engine for which script will be generated when using offline
+# migration
+# engine =
+
+# The SQLAlchemy connection string used to connect to the slave database
+# slave_connection =
+
+# Database reconnection retry times - in event connectivity is lost
+# set to -1 implies an infinite retry count
+# max_retries = 10
+
+# Database reconnection interval in seconds - if the initial connection to the
+# database fails
+# retry_interval = 10
+
+# Minimum number of SQL connections to keep open in a pool
+# min_pool_size = 1
+
+# Maximum number of SQL connections to keep open in a pool
+# max_pool_size = 10
+
+# Timeout in seconds before idle sql connections are reaped
+# idle_timeout = 3600
+
+# If set, use this value for max_overflow with sqlalchemy
+# max_overflow = 20
+
+# Verbosity of SQL debugging information. 0=None, 100=Everything
+# connection_debug = 0
+
+# Add python stack traces to SQL as comment strings
+# connection_trace = False
+
+# If set, use this value for pool_timeout with sqlalchemy
+# pool_timeout = 10
+
+[nova]
+# Name of the plugin to load
+# auth_plugin =
+auth_plugin = password
+
+# Config Section from which to load plugin specific options
+# auth_section =
+
+# PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# cafile =
+
+# PEM encoded client certificate cert file
+# certfile =
+
+# Verify HTTPS connections.
+# insecure = False
+
+# PEM encoded client certificate key file
+# keyfile =
+
+# Name of nova region to use. Useful if keystone manages more than one region.
+# region_name =
+
+# Timeout value for http requests
+# timeout =
+
+[oslo_concurrency]
+
+# Directory to use for lock files. For security, the specified directory should
+# only be writable by the user running the processes that need locking.
+# Defaults to environment variable OSLO_LOCK_PATH. If external locks are used,
+# a lock path must be set.
+lock_path = $state_path/lock
+
+# Enables or disables inter-process locks.
+# disable_process_locking = False
+
+[oslo_policy]
+
+# The JSON file that defines policies.
+# policy_file = policy.json
+
+# Default rule. Enforced when a requested rule is not found.
+# policy_default_rule = default
+
+# Directories where policy configuration files are stored.
+# They can be relative to any directory in the search path defined by the
+# config_dir option, or absolute paths. The file defined by policy_file
+# must exist for these directories to be searched. Missing or empty
+# directories are ignored.
+# policy_dirs = policy.d
+
+[oslo_messaging_amqp]
+
+#
+# From oslo.messaging
+#
+
+# Address prefix used when sending to a specific server (string value)
+# Deprecated group/name - [amqp1]/server_request_prefix
+# server_request_prefix = exclusive
+
+# Address prefix used when broadcasting to all servers (string value)
+# Deprecated group/name - [amqp1]/broadcast_prefix
+# broadcast_prefix = broadcast
+
+# Address prefix when sending to any server in group (string value)
+# Deprecated group/name - [amqp1]/group_request_prefix
+# group_request_prefix = unicast
+
+# Name for the AMQP container (string value)
+# Deprecated group/name - [amqp1]/container_name
+# container_name =
+
+# Timeout for inactive connections (in seconds) (integer value)
+# Deprecated group/name - [amqp1]/idle_timeout
+# idle_timeout = 0
+
+# Debug: dump AMQP frames to stdout (boolean value)
+# Deprecated group/name - [amqp1]/trace
+# trace = false
+
+# CA certificate PEM file for verifing server certificate (string value)
+# Deprecated group/name - [amqp1]/ssl_ca_file
+# ssl_ca_file =
+
+# Identifying certificate PEM file to present to clients (string value)
+# Deprecated group/name - [amqp1]/ssl_cert_file
+# ssl_cert_file =
+
+# Private key PEM file used to sign cert_file certificate (string value)
+# Deprecated group/name - [amqp1]/ssl_key_file
+# ssl_key_file =
+
+# Password for decrypting ssl_key_file (if encrypted) (string value)
+# Deprecated group/name - [amqp1]/ssl_key_password
+# ssl_key_password =
+
+# Accept clients using either SSL or plain TCP (boolean value)
+# Deprecated group/name - [amqp1]/allow_insecure_clients
+# allow_insecure_clients = false
+
+
+[oslo_messaging_qpid]
+
+#
+# From oslo.messaging
+#
+
+# Use durable queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
+# amqp_durable_queues = false
+
+# Auto-delete queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/amqp_auto_delete
+# amqp_auto_delete = false
+
+# Size of RPC connection pool. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_conn_pool_size
+# rpc_conn_pool_size = 30
+
+# Qpid broker hostname. (string value)
+# Deprecated group/name - [DEFAULT]/qpid_hostname
+# qpid_hostname = localhost
+
+# Qpid broker port. (integer value)
+# Deprecated group/name - [DEFAULT]/qpid_port
+# qpid_port = 5672
+
+# Qpid HA cluster host:port pairs. (list value)
+# Deprecated group/name - [DEFAULT]/qpid_hosts
+# qpid_hosts = $qpid_hostname:$qpid_port
+
+# Username for Qpid connection. (string value)
+# Deprecated group/name - [DEFAULT]/qpid_username
+# qpid_username =
+
+# Password for Qpid connection. (string value)
+# Deprecated group/name - [DEFAULT]/qpid_password
+# qpid_password =
+
+# Space separated list of SASL mechanisms to use for auth. (string value)
+# Deprecated group/name - [DEFAULT]/qpid_sasl_mechanisms
+# qpid_sasl_mechanisms =
+
+# Seconds between connection keepalive heartbeats. (integer value)
+# Deprecated group/name - [DEFAULT]/qpid_heartbeat
+# qpid_heartbeat = 60
+
+# Transport to use, either 'tcp' or 'ssl'. (string value)
+# Deprecated group/name - [DEFAULT]/qpid_protocol
+# qpid_protocol = tcp
+
+# Whether to disable the Nagle algorithm. (boolean value)
+# Deprecated group/name - [DEFAULT]/qpid_tcp_nodelay
+# qpid_tcp_nodelay = true
+
+# The number of prefetched messages held by receiver. (integer value)
+# Deprecated group/name - [DEFAULT]/qpid_receiver_capacity
+# qpid_receiver_capacity = 1
+
+# The qpid topology version to use.  Version 1 is what was originally used by
+# impl_qpid.  Version 2 includes some backwards-incompatible changes that allow
+# broker federation to work.  Users should update to version 2 when they are
+# able to take everything down, as it requires a clean break. (integer value)
+# Deprecated group/name - [DEFAULT]/qpid_topology_version
+# qpid_topology_version = 1
+
+
+[oslo_messaging_rabbit]
+
+#
+# From oslo.messaging
+#
+
+# Use durable queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
+# amqp_durable_queues = false
+
+# Auto-delete queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/amqp_auto_delete
+# amqp_auto_delete = false
+
+# Size of RPC connection pool. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_conn_pool_size
+rpc_conn_pool_size = 40
+
+# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
+# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
+# distributions. (string value)
+# Deprecated group/name - [DEFAULT]/kombu_ssl_version
+# kombu_ssl_version =
+
+# SSL key file (valid only if SSL enabled). (string value)
+# Deprecated group/name - [DEFAULT]/kombu_ssl_keyfile
+# kombu_ssl_keyfile =
+
+# SSL cert file (valid only if SSL enabled). (string value)
+# Deprecated group/name - [DEFAULT]/kombu_ssl_certfile
+# kombu_ssl_certfile =
+
+# SSL certification authority file (valid only if SSL enabled). (string value)
+# Deprecated group/name - [DEFAULT]/kombu_ssl_ca_certs
+# kombu_ssl_ca_certs =
+
+# How long to wait before reconnecting in response to an AMQP consumer cancel
+# notification. (floating point value)
+# Deprecated group/name - [DEFAULT]/kombu_reconnect_delay
+# kombu_reconnect_delay = 1.0
+
+# The RabbitMQ broker address where a single node is used. (string value)
+# Deprecated group/name - [DEFAULT]/rabbit_host
+# rabbit_host = localhost
+
+{%- if server.message_queue.members is defined %}
+rabbit_hosts = {% for member in server.message_queue.members -%}
+                   {{ member.host }}:{{ member.get('port', 5672) }}
+                   {%- if not loop.last -%},{%- endif -%}
+               {%- endfor -%}
+{%- else %}
+rabbit_host = {{ server.message_queue.host }}
+rabbit_port = {{ server.message_queue.port }}
+{%- endif %}
+
+rabbit_userid = {{ neutron.message_queue.user }}
+rabbit_password = {{ neutron.message_queue.password }}
+rabbit_virtual_host = {{ neutron.message_queue.virtual_host }}
+
+rabbit_retry_interval = 1
+
+rabbit_retry_backoff = 2
+
+rabbit_max_retries = 0
+
+# Use HA queues in RabbitMQ (x-ha-policy: all). If you change this option, you
+# must wipe the RabbitMQ database. (boolean value)
+# Deprecated group/name - [DEFAULT]/rabbit_ha_queues
+# rabbit_ha_queues = false
+
+# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake (boolean value)
+# Deprecated group/name - [DEFAULT]/fake_rabbit
+# fake_rabbit = false
+[QUOTAS]
+quota_network = -1
+quota_subnet = -1
+quota_port = -1
+
+[NOVA]
+vif_types = vrouter
+
+[service_providers]
+service_provider = LOADBALANCER:Opencontrail:neutron_plugin_contrail.plugins.opencontrail.loadbalancer.driver.OpencontrailLoadbalancerDriver:default
diff --git a/neutron/files/mitaka/ContrailPlugin.ini b/neutron/files/mitaka/ContrailPlugin.ini
new file mode 100644
index 0000000..1fed366
--- /dev/null
+++ b/neutron/files/mitaka/ContrailPlugin.ini
@@ -0,0 +1,15 @@
+{% from "neutron/map.jinja" import server with context %}
+{% from "opencontrail/map.jinja" import config with context %}
+[APISERVER]
+api_server_ip = {{ config.discovery.host }}
+api_server_port = 8082
+multi_tenancy = True
+contrail_extensions = ipam:neutron_plugin_contrail.plugins.opencontrail.contrail_plugin_ipam.NeutronPluginContrailIpam,policy:neutron_plugin_contrail.plugins.opencontrail.contrail_plugin_policy.NeutronPluginContrailPolicy,route-table:neutron_plugin_contrail.plugins.opencontrail.contrail_plugin_vpc.NeutronPluginContrailVpc,contrail:None
+
+[KEYSTONE]
+auth_url = http://{{ config.identity.host }}:35357/v2.0
+admin_token = {{ config.identity.token }}
+admin_user={{ config.identity.user }}
+admin_password={{ config.identity.password }}
+admin_tenant_name={{ config.identity.tenant }}
+
diff --git a/neutron/files/mitaka/api-paste.ini.Debian b/neutron/files/mitaka/api-paste.ini.Debian
new file mode 100644
index 0000000..5902651
--- /dev/null
+++ b/neutron/files/mitaka/api-paste.ini.Debian
@@ -0,0 +1,34 @@
+[composite:neutron]
+use = egg:Paste#urlmap
+/: neutronversions
+/v2.0: neutronapi_v2_0
+
+[composite:neutronapi_v2_0]
+use = call:neutron.auth:pipeline_factory
+noauth = cors request_id catch_errors extensions neutronapiapp_v2_0
+keystone = cors request_id catch_errors authtoken keystonecontext extensions neutronapiapp_v2_0
+
+[filter:request_id]
+paste.filter_factory = oslo_middleware:RequestId.factory
+
+[filter:catch_errors]
+paste.filter_factory = oslo_middleware:CatchErrors.factory
+
+[filter:cors]
+paste.filter_factory = oslo_middleware.cors:filter_factory
+oslo_config_project = neutron
+
+[filter:keystonecontext]
+paste.filter_factory = neutron.auth:NeutronKeystoneContext.factory
+
+[filter:authtoken]
+paste.filter_factory = keystonemiddleware.auth_token:filter_factory
+
+[filter:extensions]
+paste.filter_factory = neutron.api.extensions:plugin_aware_extension_middleware_factory
+
+[app:neutronversions]
+paste.app_factory = neutron.api.versions:Versions.factory
+
+[app:neutronapiapp_v2_0]
+paste.app_factory = neutron.api.v2.router:APIRouter.factory
diff --git a/neutron/files/mitaka/api-paste.ini.RedHat b/neutron/files/mitaka/api-paste.ini.RedHat
new file mode 120000
index 0000000..08fd76a
--- /dev/null
+++ b/neutron/files/mitaka/api-paste.ini.RedHat
@@ -0,0 +1 @@
+api-paste.ini.Debian
\ No newline at end of file
diff --git a/neutron/files/mitaka/neutron-server b/neutron/files/mitaka/neutron-server
new file mode 100644
index 0000000..9b06503
--- /dev/null
+++ b/neutron/files/mitaka/neutron-server
@@ -0,0 +1,16 @@
+# Generated by Salt.
+{%- from "neutron/map.jinja" import server with context %}
+
+# defaults for neutron-server
+
+# path to config file corresponding to the core_plugin specified in
+# neutron.conf
+#NEUTRON_PLUGIN_CONFIG="/etc/neutron/plugins/openvswitch/ovs_neutron_plugin.ini"
+
+{%- if server.plugin == "ml2" %}
+NEUTRON_PLUGIN_CONFIG="/etc/neutron/plugins/ml2/ml2_conf.ini"
+{%- endif %}
+
+{%- if server.plugin == "contrail" %}
+NEUTRON_PLUGIN_CONFIG="/etc/neutron/plugins/opencontrail/ContrailPlugin.ini"
+{%- endif %}
\ No newline at end of file
diff --git a/neutron/files/mitaka/neutron-server.conf.contrail.Debian b/neutron/files/mitaka/neutron-server.conf.contrail.Debian
new file mode 100644
index 0000000..e6889e8
--- /dev/null
+++ b/neutron/files/mitaka/neutron-server.conf.contrail.Debian
@@ -0,0 +1,1577 @@
+{%- from "neutron/map.jinja" import server with context %}
+[DEFAULT]
+
+#
+# From neutron
+#
+
+# Where to store Neutron state files. This directory must be writable by the
+# agent. (string value)
+#state_path = /var/lib/neutron
+state_path = /var/lib/neutron
+
+# The host IP to bind to (string value)
+#bind_host = 0.0.0.0
+bind_host = {{ server.bind.address }}
+
+# The port to bind to (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#bind_port = 9696
+bind_port = {{ server.bind.port }}
+
+# The path for API extensions. Note that this can be a colon-separated list of
+# paths. For example: api_extensions_path =
+# extensions:/path/to/more/exts:/even/more/exts. The __path__ of
+# neutron.extensions is appended to this, so if your extensions are in there
+# you don't need to specify them here. (string value)
+#api_extensions_path =
+api_extensions_path = extensions:/usr/lib/python2.7/dist-packages/neutron_plugin_contrail/extensions
+
+# The type of authentication to use (string value)
+#auth_strategy = keystone
+auth_strategy = keystone
+
+# The core plugin Neutron will use (string value)
+core_plugin = neutron_plugin_contrail.plugins.opencontrail.contrail_plugin.NeutronPluginContrailCoreV2
+
+
+# The service plugins Neutron will use (list value)
+#service_plugins =
+
+# The base MAC address Neutron will use for VIFs. The first 3 octets will
+# remain unchanged. If the 4th octet is not 00, it will also be used. The
+# others will be randomly generated. (string value)
+#base_mac = fa:16:3e:00:00:00
+
+# How many times Neutron will retry MAC generation (integer value)
+#mac_generation_retries = 16
+
+# Allow the usage of the bulk API (boolean value)
+#allow_bulk = true
+
+# Allow the usage of the pagination (boolean value)
+#allow_pagination = false
+
+# Allow the usage of the sorting (boolean value)
+#allow_sorting = false
+
+# The maximum number of items returned in a single response, value was
+# 'infinite' or negative integer means no limit (string value)
+#pagination_max_limit = -1
+
+# Default value of availability zone hints. The availability zone aware
+# schedulers use this when the resources availability_zone_hints is empty.
+# Multiple availability zones can be specified by a comma separated string.
+# This value can be empty. In this case, even if availability_zone_hints for a
+# resource is empty, availability zone is considered for high availability
+# while scheduling the resource. (list value)
+#default_availability_zones =
+
+# Maximum number of DNS nameservers per subnet (integer value)
+#max_dns_nameservers = 5
+
+# Maximum number of host routes per subnet (integer value)
+#max_subnet_host_routes = 20
+
+# Maximum number of fixed ips per port. This option is deprecated and will be
+# removed in the N release. (integer value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#max_fixed_ips_per_port = 5
+
+# Default IPv4 subnet pool to be used for automatic subnet CIDR allocation.
+# Specifies by UUID the pool to be used in case where creation of a subnet is
+# being called without a subnet pool ID. If not set then no pool will be used
+# unless passed explicitly to the subnet create. If no pool is used, then a
+# CIDR must be passed to create a subnet and that subnet will not be allocated
+# from any pool; it will be considered part of the tenant's private address
+# space. This option is deprecated for removal in the N release. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#default_ipv4_subnet_pool = <None>
+
+# Default IPv6 subnet pool to be used for automatic subnet CIDR allocation.
+# Specifies by UUID the pool to be used in case where creation of a subnet is
+# being called without a subnet pool ID. See the description for
+# default_ipv4_subnet_pool for more information. This option is deprecated for
+# removal in the N release. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#default_ipv6_subnet_pool = <None>
+
+# Enables IPv6 Prefix Delegation for automatic subnet CIDR allocation. Set to
+# True to enable IPv6 Prefix Delegation for subnet allocation in a PD-capable
+# environment. Users making subnet creation requests for IPv6 subnets without
+# providing a CIDR or subnetpool ID will be given a CIDR via the Prefix
+# Delegation mechanism. Note that enabling PD will override the behavior of the
+# default IPv6 subnetpool. (boolean value)
+#ipv6_pd_enabled = false
+
+# DHCP lease duration (in seconds). Use -1 to tell dnsmasq to use infinite
+# lease times. (integer value)
+# Deprecated group/name - [DEFAULT]/dhcp_lease_time
+#dhcp_lease_duration = 86400
+
+# Domain to use for building the hostnames (string value)
+#dns_domain = openstacklocal
+dns_domain = {{ server.dns_domain }}
+
+# Driver for external DNS integration. (string value)
+#external_dns_driver = <None>
+
+# Allow sending resource operation notification to DHCP agent (boolean value)
+#dhcp_agent_notification = true
+
+# Allow overlapping IP support in Neutron. Attention: the following parameter
+# MUST be set to False if Neutron is being used in conjunction with Nova
+# security groups. (boolean value)
+#allow_overlapping_ips = false
+allow_overlapping_ips = True
+
+# Hostname to be used by the Neutron server, agents and services running on
+# this machine. All the agents and services running on this machine must use
+# the same host value. (string value)
+#host = example.domain
+
+# Ensure that configured gateway is on subnet. For IPv6, validate only if
+# gateway is not a link local address. Deprecated, to be removed during the
+# Newton release, at which point the gateway will not be forced on to subnet.
+# (boolean value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#force_gateway_on_subnet = true
+
+# Send notification to nova when port status changes (boolean value)
+#notify_nova_on_port_status_changes = true
+notify_nova_on_port_status_changes = True
+
+# Send notification to nova when port data (fixed_ips/floatingip) changes so
+# nova can update its cache. (boolean value)
+#notify_nova_on_port_data_changes = true
+notify_nova_on_port_data_changes = False
+
+# Number of seconds between sending events to nova if there are any events to
+# send. (integer value)
+#send_events_interval = 2
+
+# If True, advertise network MTU values if core plugin calculates them. MTU is
+# advertised to running instances via DHCP and RA MTU options. (boolean value)
+#advertise_mtu = true
+
+# Neutron IPAM (IP address management) driver to use. If ipam_driver is not set
+# (default behavior), no IPAM driver is used. In order to use the reference
+# implementation of Neutron IPAM driver, use 'internal'. (string value)
+#ipam_driver = <None>
+
+# If True, then allow plugins that support it to create VLAN transparent
+# networks. (boolean value)
+#vlan_transparent = false
+
+# This will choose the web framework in which to run the Neutron API server.
+# 'pecan' is a new experiemental rewrite of the API server. (string value)
+# Allowed values: legacy, pecan
+#web_framework = legacy
+
+# MTU of the underlying physical network. Neutron uses this value to calculate
+# MTU for all virtual network components. For flat and VLAN networks, neutron
+# uses this value without modification. For overlay networks such as VXLAN,
+# neutron automatically subtracts the overlay protocol overhead from this
+# value. Defaults to 1500, the standard value for Ethernet. (integer value)
+# Deprecated group/name - [ml2]/segment_mtu
+#global_physnet_mtu = 1500
+
+# Number of backlog requests to configure the socket with (integer value)
+#backlog = 4096
+
+# Number of seconds to keep retrying to listen (integer value)
+#retry_until_window = 30
+
+# Enable SSL on the API server (boolean value)
+#use_ssl = false
+
+# Seconds between running periodic tasks (integer value)
+#periodic_interval = 40
+
+# Number of separate API worker processes for service. If not specified, the
+# default is equal to the number of CPUs available for best performance.
+# (integer value)
+#api_workers = <None>
+
+# Number of RPC worker processes for service (integer value)
+#rpc_workers = 1
+
+# Number of RPC worker processes dedicated to state reports queue (integer
+# value)
+#rpc_state_report_workers = 1
+
+# Range of seconds to randomly delay when starting the periodic task scheduler
+# to reduce stampeding. (Disable by setting to 0) (integer value)
+#periodic_fuzzy_delay = 5
+
+#
+# From neutron.agent
+#
+
+# The driver used to manage the virtual interface. (string value)
+#interface_driver = <None>
+
+# Location for Metadata Proxy UNIX domain socket. (string value)
+#metadata_proxy_socket = $state_path/metadata_proxy
+
+# User (uid or name) running metadata proxy after its initialization (if empty:
+# agent effective user). (string value)
+#metadata_proxy_user =
+
+# Group (gid or name) running metadata proxy after its initialization (if
+# empty: agent effective group). (string value)
+#metadata_proxy_group =
+
+# Enable/Disable log watch by metadata proxy. It should be disabled when
+# metadata_proxy_user/group is not allowed to read/write its log file and
+# copytruncate logrotate option must be used if logrotate is enabled on
+# metadata proxy log files. Option default value is deduced from
+# metadata_proxy_user: watch log is enabled if metadata_proxy_user is agent
+# effective user id/name. (boolean value)
+#metadata_proxy_watch_log = <None>
+
+#
+# From neutron.db
+#
+
+# Seconds to regard the agent is down; should be at least twice
+# report_interval, to be sure the agent is down for good. (integer value)
+#agent_down_time = 75
+
+# Representing the resource type whose load is being reported by the agent.
+# This can be "networks", "subnets" or "ports". When specified (Default is
+# networks), the server will extract particular load sent as part of its agent
+# configuration object from the agent report state, which is the number of
+# resources being consumed, at every report_interval.dhcp_load_type can be used
+# in combination with network_scheduler_driver =
+# neutron.scheduler.dhcp_agent_scheduler.WeightScheduler When the
+# network_scheduler_driver is WeightScheduler, dhcp_load_type can be configured
+# to represent the choice for the resource being balanced. Example:
+# dhcp_load_type=networks (string value)
+# Allowed values: networks, subnets, ports
+#dhcp_load_type = networks
+
+# Agent starts with admin_state_up=False when enable_new_agents=False. In the
+# case, user's resources will not be scheduled automatically to the agent until
+# admin changes admin_state_up to True. (boolean value)
+#enable_new_agents = true
+
+# Maximum number of routes per router (integer value)
+#max_routes = 30
+
+# Define the default value of enable_snat if not provided in
+# external_gateway_info. (boolean value)
+#enable_snat_by_default = true
+
+# Driver to use for scheduling network to DHCP agent (string value)
+#network_scheduler_driver = neutron.scheduler.dhcp_agent_scheduler.WeightScheduler
+
+# Allow auto scheduling networks to DHCP agent. (boolean value)
+#network_auto_schedule = true
+
+# Automatically remove networks from offline DHCP agents. (boolean value)
+#allow_automatic_dhcp_failover = true
+
+# Number of DHCP agents scheduled to host a tenant network. If this number is
+# greater than 1, the scheduler automatically assigns multiple DHCP agents for
+# a given tenant network, providing high availability for DHCP service.
+# (integer value)
+#dhcp_agents_per_network = 1
+
+# Enable services on an agent with admin_state_up False. If this option is
+# False, when admin_state_up of an agent is turned False, services on it will
+# be disabled. Agents with admin_state_up False are not selected for automatic
+# scheduling regardless of this option. But manual scheduling to such agents is
+# available if this option is True. (boolean value)
+#enable_services_on_agents_with_admin_state_down = false
+
+# The base mac address used for unique DVR instances by Neutron. The first 3
+# octets will remain unchanged. If the 4th octet is not 00, it will also be
+# used. The others will be randomly generated. The 'dvr_base_mac' *must* be
+# different from 'base_mac' to avoid mixing them up with MAC's allocated for
+# tenant ports. A 4 octet example would be dvr_base_mac = fa:16:3f:4f:00:00.
+# The default is 3 octet (string value)
+#dvr_base_mac = fa:16:3f:00:00:00
+
+# System-wide flag to determine the type of router that tenants can create.
+# Only admin can override. (boolean value)
+#router_distributed = false
+
+# Driver to use for scheduling router to a default L3 agent (string value)
+#router_scheduler_driver = neutron.scheduler.l3_agent_scheduler.LeastRoutersScheduler
+
+# Allow auto scheduling of routers to L3 agent. (boolean value)
+#router_auto_schedule = true
+
+# Automatically reschedule routers from offline L3 agents to online L3 agents.
+# (boolean value)
+#allow_automatic_l3agent_failover = false
+
+# Enable HA mode for virtual routers. (boolean value)
+#l3_ha = false
+
+# Maximum number of L3 agents which a HA router will be scheduled on. If it is
+# set to 0 then the router will be scheduled on every agent. (integer value)
+#max_l3_agents_per_router = 3
+
+# Minimum number of L3 agents which a HA router will be scheduled on. If it is
+# set to 0 then the router will be scheduled on every agent. (integer value)
+#min_l3_agents_per_router = 2
+
+# Subnet used for the l3 HA admin network. (string value)
+#l3_ha_net_cidr = 169.254.192.0/18
+
+# The network type to use when creating the HA network for an HA router. By
+# default or if empty, the first 'tenant_network_types' is used. This is
+# helpful when the VRRP traffic should use a specific network which is not the
+# default one. (string value)
+#l3_ha_network_type =
+
+# The physical network name with which the HA network can be created. (string
+# value)
+#l3_ha_network_physical_name =
+
+#
+# From neutron.extensions
+#
+
+# Maximum number of allowed address pairs (integer value)
+#max_allowed_address_pair = 10
+
+#
+# From neutron.qos
+#
+
+# Drivers list to use to send the update notification (list value)
+#notification_drivers = m,e,s,s,a,g,e,_,q,u,e,u,e
+
+#
+# From oslo.log
+#
+
+# If set to true, the logging level will be set to DEBUG instead of the default
+# INFO level. (boolean value)
+#debug = false
+
+# If set to false, the logging level will be set to WARNING instead of the
+# default INFO level. (boolean value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#verbose = true
+verbose = true
+
+# The name of a logging configuration file. This file is appended to any
+# existing logging configuration files. For details about logging configuration
+# files, see the Python logging module documentation. Note that when logging
+# configuration files are used then all logging configuration is set in the
+# configuration file and other logging configuration options are ignored (for
+# example, logging_context_format_string). (string value)
+# Deprecated group/name - [DEFAULT]/log_config
+#log_config_append = <None>
+
+# Defines the format string for %%(asctime)s in log records. Default:
+# %(default)s . This option is ignored if log_config_append is set. (string
+# value)
+#log_date_format = %Y-%m-%d %H:%M:%S
+
+# (Optional) Name of log file to send logging output to. If no default is set,
+# logging will go to stderr as defined by use_stderr. This option is ignored if
+# log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logfile
+#log_file = <None>
+
+# (Optional) The base directory used for relative log_file  paths. This option
+# is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logdir
+#log_dir = <None>
+
+# Uses logging handler designed to watch file system. When log file is moved or
+# removed this handler will open a new log file with specified path
+# instantaneously. It makes sense only if log_file option is specified and
+# Linux platform is used. This option is ignored if log_config_append is set.
+# (boolean value)
+#watch_log_file = false
+
+# Use syslog for logging. Existing syslog format is DEPRECATED and will be
+# changed later to honor RFC5424. This option is ignored if log_config_append
+# is set. (boolean value)
+#use_syslog = false
+
+# Syslog facility to receive log lines. This option is ignored if
+# log_config_append is set. (string value)
+#syslog_log_facility = LOG_USER
+
+# Log output to standard error. This option is ignored if log_config_append is
+# set. (boolean value)
+#use_stderr = true
+
+# Format string to use for log messages with context. (string value)
+#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
+
+# Format string to use for log messages when context is undefined. (string
+# value)
+#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
+
+# Additional data to append to log message when logging level for the message
+# is DEBUG. (string value)
+#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
+
+# Prefix each line of exception output with this format. (string value)
+#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
+
+# Defines the format string for %(user_identity)s that is used in
+# logging_context_format_string. (string value)
+#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
+
+# List of package logging levels in logger=LEVEL pairs. This option is ignored
+# if log_config_append is set. (list value)
+#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
+
+# Enables or disables publication of error events. (boolean value)
+#publish_errors = false
+
+# The format for an instance that is passed with the log message. (string
+# value)
+#instance_format = "[instance: %(uuid)s] "
+
+# The format for an instance UUID that is passed with the log message. (string
+# value)
+#instance_uuid_format = "[instance: %(uuid)s] "
+
+# Enables or disables fatal status of deprecations. (boolean value)
+#fatal_deprecations = false
+
+#
+# From oslo.messaging
+#
+
+# Size of RPC connection pool. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_conn_pool_size
+#rpc_conn_pool_size = 30
+
+# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
+# The "host" option should point or resolve to this address. (string value)
+#rpc_zmq_bind_address = *
+
+# MatchMaker driver. (string value)
+# Allowed values: redis, dummy
+#rpc_zmq_matchmaker = redis
+
+# Type of concurrency used. Either "native" or "eventlet" (string value)
+#rpc_zmq_concurrency = eventlet
+
+# Number of ZeroMQ contexts, defaults to 1. (integer value)
+#rpc_zmq_contexts = 1
+
+# Maximum number of ingress messages to locally buffer per topic. Default is
+# unlimited. (integer value)
+#rpc_zmq_topic_backlog = <None>
+
+# Directory for holding IPC sockets. (string value)
+#rpc_zmq_ipc_dir = /var/run/openstack
+
+# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
+# "host" option, if running Nova. (string value)
+#rpc_zmq_host = localhost
+
+# Seconds to wait before a cast expires (TTL). The default value of -1
+# specifies an infinite linger period. The value of 0 specifies no linger
+# period. Pending messages shall be discarded immediately when the socket is
+# closed. Only supported by impl_zmq. (integer value)
+#rpc_cast_timeout = -1
+rpc_cast_timeout=30
+
+# The default number of seconds that poll should wait. Poll raises timeout
+# exception when timeout expired. (integer value)
+#rpc_poll_timeout = 1
+
+# Expiration timeout in seconds of a name service record about existing target
+# ( < 0 means no timeout). (integer value)
+#zmq_target_expire = 120
+
+# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
+# value)
+#use_pub_sub = true
+
+# Minimal port number for random ports range. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#rpc_zmq_min_port = 49152
+
+# Maximal port number for random ports range. (integer value)
+# Minimum value: 1
+# Maximum value: 65536
+#rpc_zmq_max_port = 65536
+
+# Number of retries to find free port number before fail with ZMQBindError.
+# (integer value)
+#rpc_zmq_bind_port_retries = 100
+
+# Size of executor thread pool. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
+#executor_thread_pool_size = 64
+executor_thread_pool_size = 70
+
+# Seconds to wait for a response from a call. (integer value)
+#rpc_response_timeout = 60
+rpc_response_timeout=60
+
+# A URL representing the messaging driver to use and its full configuration. If
+# not set, we fall back to the rpc_backend option and driver specific
+# configuration. (string value)
+#transport_url = <None>
+
+# The messaging driver to use, defaults to rabbit. Other drivers include amqp
+# and zmq. (string value)
+#rpc_backend = rabbit
+rpc_backend = rabbit
+
+# The default exchange under which topics are scoped. May be overridden by an
+# exchange name specified in the transport_url option. (string value)
+#control_exchange = neutron
+
+#
+# From oslo.service.wsgi
+#
+
+# File name for the paste.deploy config for api service (string value)
+#api_paste_config = api-paste.ini
+
+# A python format string that is used as the template to generate log lines.
+# The following values can beformatted into it: client_ip, date_time,
+# request_line, status_code, body_length, wall_seconds. (string value)
+#wsgi_log_format = %(client_ip)s "%(request_line)s" status: %(status_code)s  len: %(body_length)s time: %(wall_seconds).7f
+
+# Sets the value of TCP_KEEPIDLE in seconds for each server socket. Not
+# supported on OS X. (integer value)
+#tcp_keepidle = 600
+
+# Size of the pool of greenthreads used by wsgi (integer value)
+#wsgi_default_pool_size = 1000
+
+# Maximum line size of message headers to be accepted. max_header_line may need
+# to be increased when using large tokens (typically those generated by the
+# Keystone v3 API with big service catalogs). (integer value)
+#max_header_line = 16384
+
+# If False, closes the client socket connection explicitly. (boolean value)
+#wsgi_keep_alive = true
+
+# Timeout for client connections' socket operations. If an incoming connection
+# is idle for this number of seconds it will be closed. A value of '0' means
+# wait forever. (integer value)
+#client_socket_timeout = 900
+
+
+[agent]
+
+#
+# From neutron.agent
+#
+
+# Root helper application. Use 'sudo neutron-rootwrap
+# /etc/neutron/rootwrap.conf' to use the real root filter facility. Change to
+# 'sudo' to skip the filtering and just run the command directly. (string
+# value)
+root_helper = sudo /usr/bin/neutron-rootwrap /etc/neutron/rootwrap.conf
+
+# Use the root helper when listing the namespaces on a system. This may not be
+# required depending on the security configuration. If the root helper is not
+# required, set this to False for a performance improvement. (boolean value)
+#use_helper_for_ns_read = true
+
+# Root helper daemon application to use when possible. (string value)
+#root_helper_daemon = <None>
+
+# Seconds between nodes reporting state to server; should be less than
+# agent_down_time, best if it is half or less than agent_down_time. (floating
+# point value)
+#report_interval = 30
+
+# Log agent heartbeats (boolean value)
+#log_agent_heartbeats = false
+
+# Add comments to iptables rules. Set to false to disallow the addition of
+# comments to generated iptables rules that describe each rule's purpose.
+# System must support the iptables comments module for addition of comments.
+# (boolean value)
+#comment_iptables_rules = true
+
+# Action to be executed when a child process dies (string value)
+# Allowed values: respawn, exit
+#check_child_processes_action = respawn
+
+# Interval between checks of child process liveness (seconds), use 0 to disable
+# (integer value)
+#check_child_processes_interval = 60
+
+# Availability zone of this node (string value)
+#availability_zone = nova
+
+
+[cors]
+
+#
+# From oslo.middleware.cors
+#
+
+# Indicate whether this resource may be shared with the domain received in the
+# requests "origin" header. (list value)
+#allowed_origin = <None>
+
+# Indicate that the actual request can include user credentials (boolean value)
+#allow_credentials = true
+
+# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
+# Headers. (list value)
+#expose_headers = X-Auth-Token,X-Subject-Token,X-Service-Token,X-OpenStack-Request-ID,OpenStack-Volume-microversion
+
+# Maximum cache age of CORS preflight requests. (integer value)
+#max_age = 3600
+
+# Indicate which methods can be used during the actual request. (list value)
+#allow_methods = GET,PUT,POST,DELETE,PATCH
+
+# Indicate which header field names may be used during the actual request.
+# (list value)
+#allow_headers = X-Auth-Token,X-Identity-Status,X-Roles,X-Service-Catalog,X-User-Id,X-Tenant-Id,X-OpenStack-Request-ID
+
+
+[cors.subdomain]
+
+#
+# From oslo.middleware.cors
+#
+
+# Indicate whether this resource may be shared with the domain received in the
+# requests "origin" header. (list value)
+#allowed_origin = <None>
+
+# Indicate that the actual request can include user credentials (boolean value)
+#allow_credentials = true
+
+# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
+# Headers. (list value)
+#expose_headers = X-Auth-Token,X-Subject-Token,X-Service-Token,X-OpenStack-Request-ID,OpenStack-Volume-microversion
+
+# Maximum cache age of CORS preflight requests. (integer value)
+#max_age = 3600
+
+# Indicate which methods can be used during the actual request. (list value)
+#allow_methods = GET,PUT,POST,DELETE,PATCH
+
+# Indicate which header field names may be used during the actual request.
+# (list value)
+#allow_headers = X-Auth-Token,X-Identity-Status,X-Roles,X-Service-Catalog,X-User-Id,X-Tenant-Id,X-OpenStack-Request-ID
+
+
+[database]
+
+#
+# From neutron.db
+#
+
+# Database engine for which script will be generated when using offline
+# migration. (string value)
+#engine =
+
+#
+# From oslo.db
+#
+
+# The file name to use with SQLite. (string value)
+# Deprecated group/name - [DEFAULT]/sqlite_db
+#sqlite_db = oslo.sqlite
+
+# If True, SQLite uses synchronous mode. (boolean value)
+# Deprecated group/name - [DEFAULT]/sqlite_synchronous
+#sqlite_synchronous = true
+
+# The back end to use for the database. (string value)
+# Deprecated group/name - [DEFAULT]/db_backend
+#backend = sqlalchemy
+
+# The SQLAlchemy connection string to use to connect to the database. (string
+# value)
+# Deprecated group/name - [DEFAULT]/sql_connection
+# Deprecated group/name - [DATABASE]/sql_connection
+# Deprecated group/name - [sql]/connection
+connection = sqlite:////var/lib/neutron/neutron.sqlite
+
+# The SQLAlchemy connection string to use to connect to the slave database.
+# (string value)
+#slave_connection = <None>
+
+# The SQL mode to be used for MySQL sessions. This option, including the
+# default, overrides any server-set SQL mode. To use whatever SQL mode is set
+# by the server configuration, set this to no value. Example: mysql_sql_mode=
+# (string value)
+#mysql_sql_mode = TRADITIONAL
+
+# Timeout before idle SQL connections are reaped. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_idle_timeout
+# Deprecated group/name - [DATABASE]/sql_idle_timeout
+# Deprecated group/name - [sql]/idle_timeout
+#idle_timeout = 3600
+
+# Minimum number of SQL connections to keep open in a pool. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_min_pool_size
+# Deprecated group/name - [DATABASE]/sql_min_pool_size
+#min_pool_size = 1
+
+# Maximum number of SQL connections to keep open in a pool. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_max_pool_size
+# Deprecated group/name - [DATABASE]/sql_max_pool_size
+#max_pool_size = <None>
+
+# Maximum number of database connection retries during startup. Set to -1 to
+# specify an infinite retry count. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_max_retries
+# Deprecated group/name - [DATABASE]/sql_max_retries
+#max_retries = 10
+
+# Interval between retries of opening a SQL connection. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_retry_interval
+# Deprecated group/name - [DATABASE]/reconnect_interval
+#retry_interval = 10
+
+# If set, use this value for max_overflow with SQLAlchemy. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_max_overflow
+# Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
+#max_overflow = 50
+
+# Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
+# value)
+# Deprecated group/name - [DEFAULT]/sql_connection_debug
+#connection_debug = 0
+
+# Add Python stack traces to SQL as comment strings. (boolean value)
+# Deprecated group/name - [DEFAULT]/sql_connection_trace
+#connection_trace = false
+
+# If set, use this value for pool_timeout with SQLAlchemy. (integer value)
+# Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
+#pool_timeout = <None>
+
+# Enable the experimental use of database reconnect on connection lost.
+# (boolean value)
+#use_db_reconnect = false
+
+# Seconds between retries of a database transaction. (integer value)
+#db_retry_interval = 1
+
+# If True, increases the interval between retries of a database operation up to
+# db_max_retry_interval. (boolean value)
+#db_inc_retry_interval = true
+
+# If db_inc_retry_interval is set, the maximum seconds between retries of a
+# database operation. (integer value)
+#db_max_retry_interval = 10
+
+# Maximum retries in case of connection error or deadlock error before error is
+# raised. Set to -1 to specify an infinite retry count. (integer value)
+#db_max_retries = 20
+
+
+[keystone_authtoken]
+
+identity_uri = http://{{ server.identity.host }}:5000
+auth_host = {{ server.identity.host }}
+auth_port = {{ server.identity.port }}
+auth_protocol = http
+admin_tenant_name = {{ server.identity.tenant }}
+admin_user = {{ server.identity.user }}
+admin_password = {{ server.identity.password }}
+auth_uri=http://{{ server.identity.host }}:5000
+auth_url=http://{{ server.identity.host }}:35357
+auth_region={{ server.identity.region }}
+#
+# From keystonemiddleware.auth_token
+#
+
+# Complete public Identity API endpoint. (string value)
+#auth_uri = <None>
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+# Do not handle authorization requests within the middleware, but delegate the
+# authorization decision to downstream WSGI components. (boolean value)
+#delay_auth_decision = false
+
+# Request timeout value for communicating with Identity API server. (integer
+# value)
+#http_connect_timeout = <None>
+
+# How many times are we trying to reconnect when communicating with Identity
+# API Server. (integer value)
+#http_request_max_retries = 3
+
+# Env key for the swift cache. (string value)
+#cache = <None>
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# The region in which the identity server can be found. (string value)
+#region_name = <None>
+
+# Directory used to cache files related to PKI tokens. (string value)
+#signing_dir = <None>
+
+# Optionally specify a list of memcached server(s) to use for caching. If left
+# undefined, tokens will instead be cached in-process. (list value)
+# Deprecated group/name - [DEFAULT]/memcache_servers
+#memcached_servers = <None>
+
+# In order to prevent excessive effort spent validating tokens, the middleware
+# caches previously-seen tokens for a configurable duration (in seconds). Set
+# to -1 to disable caching completely. (integer value)
+#token_cache_time = 300
+
+# Determines the frequency at which the list of revoked tokens is retrieved
+# from the Identity service (in seconds). A high number of revocation events
+# combined with a low cache duration may significantly reduce performance.
+# (integer value)
+#revocation_cache_time = 10
+
+# (Optional) If defined, indicate whether token data should be authenticated or
+# authenticated and encrypted. If MAC, token data is authenticated (with HMAC)
+# in the cache. If ENCRYPT, token data is encrypted and authenticated in the
+# cache. If the value is not one of these options or empty, auth_token will
+# raise an exception on initialization. (string value)
+# Allowed values: None, MAC, ENCRYPT
+#memcache_security_strategy = None
+
+# (Optional, mandatory if memcache_security_strategy is defined) This string is
+# used for key derivation. (string value)
+#memcache_secret_key = <None>
+
+# (Optional) Number of seconds memcached server is considered dead before it is
+# tried again. (integer value)
+#memcache_pool_dead_retry = 300
+
+# (Optional) Maximum total number of open connections to every memcached
+# server. (integer value)
+#memcache_pool_maxsize = 10
+
+# (Optional) Socket timeout in seconds for communicating with a memcached
+# server. (integer value)
+#memcache_pool_socket_timeout = 3
+
+# (Optional) Number of seconds a connection to memcached is held unused in the
+# pool before it is closed. (integer value)
+#memcache_pool_unused_timeout = 60
+
+# (Optional) Number of seconds that an operation will wait to get a memcached
+# client connection from the pool. (integer value)
+#memcache_pool_conn_get_timeout = 10
+
+# (Optional) Use the advanced (eventlet safe) memcached client pool. The
+# advanced pool will only work under python 2.x. (boolean value)
+#memcache_use_advanced_pool = false
+
+# (Optional) Indicate whether to set the X-Service-Catalog header. If False,
+# middleware will not ask for service catalog on token validation and will not
+# set the X-Service-Catalog header. (boolean value)
+#include_service_catalog = true
+
+# Used to control the use and type of token binding. Can be set to: "disabled"
+# to not check token binding. "permissive" (default) to validate binding
+# information if the bind type is of a form known to the server and ignore it
+# if not. "strict" like "permissive" but if the bind type is unknown the token
+# will be rejected. "required" any form of token binding is needed to be
+# allowed. Finally the name of a binding method that must be present in tokens.
+# (string value)
+#enforce_token_bind = permissive
+
+# If true, the revocation list will be checked for cached tokens. This requires
+# that PKI tokens are configured on the identity server. (boolean value)
+#check_revocations_for_cached = false
+
+# Hash algorithms to use for hashing PKI tokens. This may be a single algorithm
+# or multiple. The algorithms are those supported by Python standard
+# hashlib.new(). The hashes will be tried in the order given, so put the
+# preferred one first for performance. The result of the first hash will be
+# stored in the cache. This will typically be set to multiple values only while
+# migrating from a less secure algorithm to a more secure one. Once all the old
+# tokens are expired this option should be set to a single value for better
+# performance. (list value)
+#hash_algorithms = md5
+
+# Prefix to prepend at the beginning of the path. Deprecated, use identity_uri.
+# (string value)
+#auth_admin_prefix =
+
+# Host providing the admin Identity API endpoint. Deprecated, use identity_uri.
+# (string value)
+#auth_host = 127.0.0.1
+
+# Port of the admin Identity API endpoint. Deprecated, use identity_uri.
+# (integer value)
+#auth_port = 35357
+
+# Protocol of the admin Identity API endpoint. Deprecated, use identity_uri.
+# (string value)
+# Allowed values: http, https
+#auth_protocol = https
+
+# Complete admin Identity API endpoint. This should specify the unversioned
+# root endpoint e.g. https://localhost:35357/ (string value)
+#identity_uri = <None>
+
+# This option is deprecated and may be removed in a future release. Single
+# shared secret with the Keystone configuration used for bootstrapping a
+# Keystone installation, or otherwise bypassing the normal authentication
+# process. This option should not be used, use `admin_user` and
+# `admin_password` instead. (string value)
+#admin_token = <None>
+
+# Service username. (string value)
+#admin_user = <None>
+
+# Service user password. (string value)
+#admin_password = <None>
+
+# Service tenant name. (string value)
+#admin_tenant_name = admin
+
+# Authentication type to load (unknown value)
+# Deprecated group/name - [DEFAULT]/auth_plugin
+#auth_type = <None>
+
+# Config Section from which to load plugin specific options (unknown value)
+#auth_section = <None>
+
+
+[matchmaker_redis]
+
+#
+# From oslo.messaging
+#
+
+# Host to locate redis. (string value)
+#host = 127.0.0.1
+
+# Use this port to connect to redis host. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#port = 6379
+
+# Password for Redis server (optional). (string value)
+#password =
+
+# List of Redis Sentinel hosts (fault tolerance mode) e.g.
+# [host:port, host1:port ... ] (list value)
+#sentinel_hosts =
+
+# Redis replica set name. (string value)
+#sentinel_group_name = oslo-messaging-zeromq
+
+# Time in ms to wait between connection attempts. (integer value)
+#wait_timeout = 500
+
+# Time in ms to wait before the transaction is killed. (integer value)
+#check_timeout = 20000
+
+# Timeout in ms on blocking socket operations (integer value)
+#socket_timeout = 1000
+
+
+[nova]
+
+#
+# From neutron
+#
+
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = {{ server.compute.region }}
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Allowed values: public, admin, internal
+#endpoint_type = public
+
+#
+# From nova.auth
+#
+
+# Authentication URL (unknown value)
+#auth_url = <None>
+user_domain_id = {{ server.identity.get('domain', 'default') }}
+project_domain_id = {{ server.identity.get('domain', 'default') }}
+project_name = {{ server.identity.tenant }}
+password = {{ server.compute.password }}
+username = {{ server.compute.user }}
+auth_type = password
+auth_url = http://{{ server.identity.host }}:35357
+
+# Authentication type to load (unknown value)
+# Deprecated group/name - [DEFAULT]/auth_plugin
+#auth_type = <None>
+
+# PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# (string value)
+#cafile = <None>
+
+# PEM encoded client certificate cert file (string value)
+#certfile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (unknown
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used
+# for both the user and project domain in v3 and ignored in v2 authentication.
+# (unknown value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (unknown value)
+#domain_id = <None>
+
+# Domain name to scope to (unknown value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# PEM encoded client certificate key file (string value)
+#keyfile = <None>
+
+# User's password (unknown value)
+#password = <None>
+
+# Domain ID containing project (unknown value)
+#project_domain_id = <None>
+
+# Domain name containing project (unknown value)
+#project_domain_name = <None>
+
+# Project ID to scope to (unknown value)
+# Deprecated group/name - [DEFAULT]/tenant-id
+#project_id = <None>
+
+# Project name to scope to (unknown value)
+# Deprecated group/name - [DEFAULT]/tenant-name
+#project_name = <None>
+
+# Tenant ID (unknown value)
+#tenant_id = <None>
+
+# Tenant Name (unknown value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (unknown value)
+#trust_id = <None>
+
+# User's domain id (unknown value)
+#user_domain_id = <None>
+
+# User's domain name (unknown value)
+#user_domain_name = <None>
+
+# User id (unknown value)
+#user_id = <None>
+
+# Username (unknown value)
+# Deprecated group/name - [DEFAULT]/username
+#username = <None>
+
+
+[oslo_concurrency]
+
+#
+# From oslo.concurrency
+#
+
+# Enables or disables inter-process locks. (boolean value)
+# Deprecated group/name - [DEFAULT]/disable_process_locking
+#disable_process_locking = false
+
+# Directory to use for lock files.  For security, the specified directory
+# should only be writable by the user running the processes that need locking.
+# Defaults to environment variable OSLO_LOCK_PATH. If OSLO_LOCK_PATH is not set
+# in the environment, use the Python tempfile.gettempdir function to find a
+# suitable location. If external locks are used, a lock path must be set.
+# (string value)
+# Deprecated group/name - [DEFAULT]/lock_path
+#lock_path = /tmp
+lock_path = $state_path/lock
+
+[oslo_messaging_amqp]
+
+#
+# From oslo.messaging
+#
+
+# address prefix used when sending to a specific server (string value)
+# Deprecated group/name - [amqp1]/server_request_prefix
+#server_request_prefix = exclusive
+
+# address prefix used when broadcasting to all servers (string value)
+# Deprecated group/name - [amqp1]/broadcast_prefix
+#broadcast_prefix = broadcast
+
+# address prefix when sending to any server in group (string value)
+# Deprecated group/name - [amqp1]/group_request_prefix
+#group_request_prefix = unicast
+
+# Name for the AMQP container (string value)
+# Deprecated group/name - [amqp1]/container_name
+#container_name = <None>
+
+# Timeout for inactive connections (in seconds) (integer value)
+# Deprecated group/name - [amqp1]/idle_timeout
+#idle_timeout = 0
+
+# Debug: dump AMQP frames to stdout (boolean value)
+# Deprecated group/name - [amqp1]/trace
+#trace = false
+
+# CA certificate PEM file to verify server certificate (string value)
+# Deprecated group/name - [amqp1]/ssl_ca_file
+#ssl_ca_file =
+
+# Identifying certificate PEM file to present to clients (string value)
+# Deprecated group/name - [amqp1]/ssl_cert_file
+#ssl_cert_file =
+
+# Private key PEM file used to sign cert_file certificate (string value)
+# Deprecated group/name - [amqp1]/ssl_key_file
+#ssl_key_file =
+
+# Password for decrypting ssl_key_file (if encrypted) (string value)
+# Deprecated group/name - [amqp1]/ssl_key_password
+#ssl_key_password = <None>
+
+# Accept clients using either SSL or plain TCP (boolean value)
+# Deprecated group/name - [amqp1]/allow_insecure_clients
+#allow_insecure_clients = false
+
+# Space separated list of acceptable SASL mechanisms (string value)
+# Deprecated group/name - [amqp1]/sasl_mechanisms
+#sasl_mechanisms =
+
+# Path to directory that contains the SASL configuration (string value)
+# Deprecated group/name - [amqp1]/sasl_config_dir
+#sasl_config_dir =
+
+# Name of configuration file (without .conf suffix) (string value)
+# Deprecated group/name - [amqp1]/sasl_config_name
+#sasl_config_name =
+
+# User name for message broker authentication (string value)
+# Deprecated group/name - [amqp1]/username
+#username =
+
+# Password for message broker authentication (string value)
+# Deprecated group/name - [amqp1]/password
+#password =
+
+
+[oslo_messaging_notifications]
+
+#
+# From oslo.messaging
+#
+
+# The Drivers(s) to handle sending notifications. Possible values are
+# messaging, messagingv2, routing, log, test, noop (multi valued)
+# Deprecated group/name - [DEFAULT]/notification_driver
+#driver =
+{%- if server.notification %}
+driver = messagingv2
+{%- endif %}
+# A URL representing the messaging driver to use for notifications. If not set,
+# we fall back to the same configuration used for RPC. (string value)
+# Deprecated group/name - [DEFAULT]/notification_transport_url
+#transport_url = <None>
+
+# AMQP topic used for OpenStack notifications. (list value)
+# Deprecated group/name - [rpc_notifier2]/topics
+# Deprecated group/name - [DEFAULT]/notification_topics
+#topics = notifications
+
+
+[oslo_messaging_rabbit]
+
+#
+# From oslo.messaging
+#
+
+# Use durable queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/amqp_durable_queues
+# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
+#amqp_durable_queues = false
+
+# Auto-delete queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/amqp_auto_delete
+#amqp_auto_delete = false
+
+# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
+# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
+# distributions. (string value)
+# Deprecated group/name - [DEFAULT]/kombu_ssl_version
+#kombu_ssl_version =
+
+# SSL key file (valid only if SSL enabled). (string value)
+# Deprecated group/name - [DEFAULT]/kombu_ssl_keyfile
+#kombu_ssl_keyfile =
+
+# SSL cert file (valid only if SSL enabled). (string value)
+# Deprecated group/name - [DEFAULT]/kombu_ssl_certfile
+#kombu_ssl_certfile =
+
+# SSL certification authority file (valid only if SSL enabled). (string value)
+# Deprecated group/name - [DEFAULT]/kombu_ssl_ca_certs
+#kombu_ssl_ca_certs =
+
+# How long to wait before reconnecting in response to an AMQP consumer cancel
+# notification. (floating point value)
+# Deprecated group/name - [DEFAULT]/kombu_reconnect_delay
+#kombu_reconnect_delay = 1.0
+
+# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not
+# be used. This option may notbe available in future versions. (string value)
+#kombu_compression = <None>
+
+# How long to wait a missing client beforce abandoning to send it its replies.
+# This value should not be longer than rpc_response_timeout. (integer value)
+# Deprecated group/name - [DEFAULT]/kombu_reconnect_timeout
+#kombu_missing_consumer_retry_timeout = 60
+
+# Determines how the next RabbitMQ node is chosen in case the one we are
+# currently connected to becomes unavailable. Takes effect only if more than
+# one RabbitMQ node is provided in config. (string value)
+# Allowed values: round-robin, shuffle
+#kombu_failover_strategy = round-robin
+
+# The RabbitMQ broker address where a single node is used. (string value)
+# Deprecated group/name - [DEFAULT]/rabbit_host
+#rabbit_host = localhost
+
+# The RabbitMQ broker port where a single node is used. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+# Deprecated group/name - [DEFAULT]/rabbit_port
+#rabbit_port = 5672
+
+# RabbitMQ HA cluster host:port pairs. (list value)
+# Deprecated group/name - [DEFAULT]/rabbit_hosts
+#rabbit_hosts = $rabbit_host:$rabbit_port
+#
+{%- if server.message_queue.members is defined %}
+rabbit_hosts = {% for member in server.message_queue.members -%}
+                   {{ member.host }}:{{ member.get('port', 5672) }}
+                   {%- if not loop.last -%},{%- endif -%}
+               {%- endfor -%}
+{%- else %}
+rabbit_host = {{ server.message_queue.host }}
+rabbit_port = {{ server.message_queue.port }}
+{%- endif %}
+
+rabbit_userid = {{ server.message_queue.user }}
+rabbit_password = {{ server.message_queue.password }}
+rabbit_virtual_host = {{ server.message_queue.virtual_host }}
+# Connect over SSL for RabbitMQ. (boolean value)
+# Deprecated group/name - [DEFAULT]/rabbit_use_ssl
+#rabbit_use_ssl = false
+
+# The RabbitMQ userid. (string value)
+# Deprecated group/name - [DEFAULT]/rabbit_userid
+#rabbit_userid = guest
+
+# The RabbitMQ password. (string value)
+# Deprecated group/name - [DEFAULT]/rabbit_password
+#rabbit_password = guest
+
+# The RabbitMQ login method. (string value)
+# Deprecated group/name - [DEFAULT]/rabbit_login_method
+#rabbit_login_method = AMQPLAIN
+
+# The RabbitMQ virtual host. (string value)
+# Deprecated group/name - [DEFAULT]/rabbit_virtual_host
+#rabbit_virtual_host = /
+
+# How frequently to retry connecting with RabbitMQ. (integer value)
+#rabbit_retry_interval = 1
+rabbit_retry_interval = 1
+
+# How long to backoff for between retries when connecting to RabbitMQ. (integer
+# value)
+# Deprecated group/name - [DEFAULT]/rabbit_retry_backoff
+#rabbit_retry_backoff = 2
+rabbit_retry_backoff = 2
+
+# Maximum interval of RabbitMQ connection retries. Default is 30 seconds.
+# (integer value)
+#rabbit_interval_max = 30
+
+# Maximum number of RabbitMQ connection retries. Default is 0 (infinite retry
+# count). (integer value)
+# Deprecated group/name - [DEFAULT]/rabbit_max_retries
+#rabbit_max_retries = 0
+rabbit_max_retries = 0
+
+# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this
+# option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring
+# is no longer controlled by the x-ha-policy argument when declaring a queue.
+# If you just want to make sure that all queues (except  those with auto-
+# generated names) are mirrored across all nodes, run: "rabbitmqctl set_policy
+# HA '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value)
+# Deprecated group/name - [DEFAULT]/rabbit_ha_queues
+#rabbit_ha_queues = false
+
+# Positive integer representing duration in seconds for queue TTL (x-expires).
+# Queues which are unused for the duration of the TTL are automatically
+# deleted. The parameter affects only reply and fanout queues. (integer value)
+# Minimum value: 1
+#rabbit_transient_queues_ttl = 1800
+
+# Specifies the number of messages to prefetch. Setting to zero allows
+# unlimited messages. (integer value)
+#rabbit_qos_prefetch_count = 0
+
+# Number of seconds after which the Rabbit broker is considered down if
+# heartbeat's keep-alive fails (0 disable the heartbeat). EXPERIMENTAL (integer
+# value)
+#heartbeat_timeout_threshold = 60
+
+# How often times during the heartbeat_timeout_threshold we check the
+# heartbeat. (integer value)
+#heartbeat_rate = 2
+
+# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake (boolean value)
+# Deprecated group/name - [DEFAULT]/fake_rabbit
+#fake_rabbit = false
+
+# Maximum number of channels to allow (integer value)
+#channel_max = <None>
+
+# The maximum byte size for an AMQP frame (integer value)
+#frame_max = <None>
+
+# How often to send heartbeats for consumer's connections (integer value)
+#heartbeat_interval = 1
+
+# Enable SSL (boolean value)
+#ssl = <None>
+
+# Arguments passed to ssl.wrap_socket (dict value)
+#ssl_options = <None>
+
+# Set socket timeout in seconds for connection's socket (floating point value)
+#socket_timeout = 0.25
+
+# Set TCP_USER_TIMEOUT in seconds for connection's socket (floating point
+# value)
+#tcp_user_timeout = 0.25
+
+# Set delay for reconnection to some host which has connection error (floating
+# point value)
+#host_connection_reconnect_delay = 0.25
+
+# Maximum number of connections to keep queued. (integer value)
+#pool_max_size = 10
+
+# Maximum number of connections to create above `pool_max_size`. (integer
+# value)
+#pool_max_overflow = 0
+
+# Default number of seconds to wait for a connections to available (integer
+# value)
+#pool_timeout = 30
+
+# Lifetime of a connection (since creation) in seconds or None for no
+# recycling. Expired connections are closed on acquire. (integer value)
+#pool_recycle = 600
+
+# Threshold at which inactive (since release) connections are considered stale
+# in seconds or None for no staleness. Stale connections are closed on acquire.
+# (integer value)
+#pool_stale = 60
+
+# Persist notification messages. (boolean value)
+#notification_persistence = false
+
+# Exchange name for for sending notifications (string value)
+#default_notification_exchange = ${control_exchange}_notification
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# notification listener. (integer value)
+#notification_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during sending
+# notification, -1 means infinite retry. (integer value)
+#default_notification_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during sending
+# notification message (floating point value)
+#notification_retry_delay = 0.25
+
+# Time to live for rpc queues without consumers in seconds. (integer value)
+#rpc_queue_expiration = 60
+
+# Exchange name for sending RPC messages (string value)
+#default_rpc_exchange = ${control_exchange}_rpc
+
+# Exchange name for receiving RPC replies (string value)
+#rpc_reply_exchange = ${control_exchange}_rpc_reply
+
+# Max number of not acknowledged message which RabbitMQ can send to rpc
+# listener. (integer value)
+#rpc_listener_prefetch_count = 100
+
+# Max number of not acknowledged message which RabbitMQ can send to rpc reply
+# listener. (integer value)
+#rpc_reply_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during sending
+# reply. -1 means infinite retry during rpc_timeout (integer value)
+#rpc_reply_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during sending
+# reply. (floating point value)
+#rpc_reply_retry_delay = 0.25
+
+# Reconnecting retry count in case of connectivity problem during sending RPC
+# message, -1 means infinite retry. If actual retry attempts in not 0 the rpc
+# request could be processed more then one time (integer value)
+#default_rpc_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during sending RPC
+# message (floating point value)
+#rpc_retry_delay = 0.25
+
+
+[oslo_policy]
+
+#
+# From oslo.policy
+#
+
+# The JSON file that defines policies. (string value)
+# Deprecated group/name - [DEFAULT]/policy_file
+#policy_file = policy.json
+
+# Default rule. Enforced when a requested rule is not found. (string value)
+# Deprecated group/name - [DEFAULT]/policy_default_rule
+#policy_default_rule = default
+
+# Directories where policy configuration files are stored. They can be relative
+# to any directory in the search path defined by the config_dir option, or
+# absolute paths. The file defined by policy_file must exist for these
+# directories to be searched.  Missing or empty directories are ignored. (multi
+# valued)
+# Deprecated group/name - [DEFAULT]/policy_dirs
+#policy_dirs = policy.d
+
+
+[quotas]
+
+#
+# From neutron
+#
+
+# Resource name(s) that are supported in quota features. This option is now
+# deprecated for removal. (list value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#quota_items = network,subnet,port
+
+# Default number of resource allowed per tenant. A negative value means
+# unlimited. (integer value)
+#default_quota = -1
+
+# Number of networks allowed per tenant. A negative value means unlimited.
+# (integer value)
+#quota_network = 10
+
+# Number of subnets allowed per tenant, A negative value means unlimited.
+# (integer value)
+#quota_subnet = 10
+
+# Number of ports allowed per tenant. A negative value means unlimited.
+# (integer value)
+#quota_port = 50
+
+# Default driver to use for quota checks (string value)
+#quota_driver = neutron.db.quota.driver.DbQuotaDriver
+quota_driver = neutron_plugin_contrail.plugins.opencontrail.quota.driver.QuotaDriver
+
+# Keep in track in the database of current resourcequota usage. Plugins which
+# do not leverage the neutron database should set this flag to False (boolean
+# value)
+#track_quota_usage = true
+
+#
+# From neutron.extensions
+#
+
+# Number of routers allowed per tenant. A negative value means unlimited.
+# (integer value)
+#quota_router = 10
+
+# Number of floating IPs allowed per tenant. A negative value means unlimited.
+# (integer value)
+#quota_floatingip = 50
+
+# Number of security groups allowed per tenant. A negative value means
+# unlimited. (integer value)
+#quota_security_group = 10
+
+# Number of security rules allowed per tenant. A negative value means
+# unlimited. (integer value)
+#quota_security_group_rule = 100
+
+
+[ssl]
+
+#
+# From oslo.service.sslutils
+#
+
+# CA certificate file to use to verify connecting clients. (string value)
+# Deprecated group/name - [DEFAULT]/ssl_ca_file
+#ca_file = <None>
+
+# Certificate file to use when starting the server securely. (string value)
+# Deprecated group/name - [DEFAULT]/ssl_cert_file
+#cert_file = <None>
+
+# Private key file to use when starting the server securely. (string value)
+# Deprecated group/name - [DEFAULT]/ssl_key_file
+#key_file = <None>
+
+# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
+# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
+# distributions. (string value)
+#version = <None>
+
+# Sets the list of available ciphers. value should be a string in the OpenSSL
+# cipher list format. (string value)
+#ciphers = <None>
+[service_providers]
+service_provider = LOADBALANCER:Opencontrail:neutron_plugin_contrail.plugins.opencontrail.loadbalancer.driver.OpencontrailLoadbalancerDriver:default
diff --git a/neutron/init.sls b/neutron/init.sls
new file mode 100644
index 0000000..aa5552a
--- /dev/null
+++ b/neutron/init.sls
@@ -0,0 +1,11 @@
+
+include:
+{% if pillar.neutron.server is defined %}
+- neutron.server
+{% endif %}
+{% if pillar.neutron.bridge is defined %}
+- neutron.bridge
+{% endif %}
+{% if pillar.neutron.compute is defined %}
+- neutron.compute
+{% endif %}
\ No newline at end of file
diff --git a/neutron/map.jinja b/neutron/map.jinja
new file mode 100644
index 0000000..4c89807
--- /dev/null
+++ b/neutron/map.jinja
@@ -0,0 +1,41 @@
+
+{% set compute = salt['grains.filter_by']({
+    'Debian': {
+        'pkgs': ['neutron-plugin-openvswitch-agent', 'openvswitch-switch', 'openvswitch-datapath-dkms'],
+        'services': ['openvswitch-switch', 'neutron-plugin-openvswitch-agent']
+    },
+    'RedHat': {
+        'pkgs': ['openstack-neutron-openvswitch', 'openvswitch', 'fuel-utils'],
+        'services': ['openvswitch', 'neutron-openvswitch-agent']
+    },
+}, merge=salt['pillar.get']('neutron:compute')) %}
+
+{% set bridge = salt['grains.filter_by']({
+    'Debian': {
+        'pkgs': ['neutron-dhcp-agent', 'neutron-plugin-openvswitch-agent', 'neutron-l3-agent', 'openvswitch-common'],
+        'precise_pkgs': ['openvswitch-datapath-lts-saucy-dkms'],
+        'migration': False,
+        'services': ['neutron-plugin-openvswitch-agent', 'neutron-metadata-agent', 'neutron-l3-agent', 'neutron-dhcp-agent']
+    },
+    'RedHat': {
+        'pkgs': ['openstack-neutron-openvswitch'],
+        'migration': False,
+        'migration_pkgs': ['fuel-utils',],
+        'services': ['neutron-openvswitch-agent', 'neutron-metadata-agent', 'neutron-l3-agent', 'neutron-dhcp-agent']
+    },
+}, merge=salt['pillar.get']('neutron:bridge')) %}
+
+{% set server = salt['grains.filter_by']({
+    'Debian': {
+        'pkgs': ['neutron-server','neutron-lbaas-agent'],
+        'pkgs_ml2': ['neutron-plugin-ml2'],
+        'services': ['neutron-server'],
+        'notification': False
+    },
+    'RedHat': {
+        'pkgs_ml2': ['openstack-neutron-ml2'],
+        'pkgs': ['openstack-neutron'],
+        'services': ['neutron-server'],
+        'notification': False
+    },
+}, merge=salt['pillar.get']('neutron:server')) %}
diff --git a/neutron/meta/sensu.yml b/neutron/meta/sensu.yml
new file mode 100644
index 0000000..f287cf4
--- /dev/null
+++ b/neutron/meta/sensu.yml
@@ -0,0 +1,7 @@
+check:
+  local_neutron_server_proc:
+    command: "PATH=$PATH:/usr/lib64/nagios/plugins:/usr/lib/nagios/plugins check_procs -C neutron-server -u neutron -c 1:30"
+    interval: 60
+    occurrences: 1
+    subscribers:
+    - local-neutron-server
\ No newline at end of file
diff --git a/neutron/meta/sphinx.yml b/neutron/meta/sphinx.yml
new file mode 100644
index 0000000..a4d2085
--- /dev/null
+++ b/neutron/meta/sphinx.yml
@@ -0,0 +1,41 @@
+doc:
+  name: Neutron
+  description: Neutron is an OpenStack project to provide networking as a service between interface devices managed by other Openstack services.
+  role:
+  {%- if pillar.neutron.server is defined %}
+  {%- from "neutron/map.jinja" import server with context %}
+    server:
+      name: server
+      endpoint:
+        neutron_server:
+          name: neutron-server
+          type: neutron-server
+          address: http://{{ server.bind.address }}:{{ server.bind.port }}
+          protocol: http
+      param:
+        bind:
+          value: {{ server.bind.address }}:{{ server.bind.port }}
+        plugin:
+          value: {{ server.plugin }}
+        version:
+          name: "Version"
+          value: {{ server.version }}
+        database_host:
+          name: "Database"
+          value: {{ server.database.user }}@{{ server.database.host }}:{{ server.database.port }}//{{ server.database.name }}
+        message_queue_ip:
+          name: "Message queue"
+          value: {{ server.message_queue.user }}@{{ server.message_queue.host }}:{{ server.message_queue.port }}{{ server.message_queue.virtual_host }}
+        compute_host:
+          name: "Compute service"
+          value: {{ server.compute.user }}@{{ server.compute.host }}
+        identity_host:
+          name: "Identity service"
+          value: {{ server.identity.user }}@{{ server.identity.host }}:{{ server.identity.port }}
+        packages:
+          value: |
+            {%- for pkg in server.pkgs %}
+            {%- set pkg_version = "dpkg -l "+pkg+" | grep "+pkg+" | awk '{print $3}'" %}
+            * {{ pkg }}: {{ salt['cmd.run'](pkg_version) }}
+            {%- endfor %}
+  {%- endif %}
\ No newline at end of file
diff --git a/neutron/server.sls b/neutron/server.sls
new file mode 100644
index 0000000..573440f
--- /dev/null
+++ b/neutron/server.sls
@@ -0,0 +1,66 @@
+{%- from "neutron/map.jinja" import server with context %}
+{%- if server.enabled %}
+
+neutron_server_packages:
+  pkg.installed:
+  - names: {{ server.pkgs }}
+
+{% if server.plugin == "contrail" %}
+
+/etc/neutron/neutron.conf:
+  file.managed:
+  - source: salt://neutron/files/{{ server.version }}/neutron-server.conf.contrail.{{ grains.os_family }}
+  - template: jinja
+  - require:
+    - pkg: neutron_server_packages
+
+/etc/neutron/plugins/opencontrail/ContrailPlugin.ini:
+  file.managed:
+  - source: salt://neutron/files/{{ server.version }}/ContrailPlugin.ini
+  - template: jinja
+  - require:
+    - pkg: neutron_server_packages
+    - pkg: neutron_contrail_package
+
+contrail_plugin_link:
+  cmd.run:
+  - names:
+    - ln -s /etc/neutron/plugins/opencontrail/ContrailPlugin.ini /etc/neutron/plugin.ini
+  - unless: test -e /etc/neutron/plugin.ini
+  - require:
+    - file: /etc/neutron/plugins/opencontrail/ContrailPlugin.ini
+
+neutron_contrail_package:
+  pkg.installed:
+  - name: neutron-plugin-contrail
+
+neutron_server_service:
+  service.running:
+  - name: neutron-server
+  - enable: true
+  - watch:
+    - file: /etc/neutron/neutron.conf
+
+{%- if grains.os_family == "Debian" %}
+
+/etc/default/neutron-server:
+  file.managed:
+  - source: salt://neutron/files/{{ server.version }}/neutron-server
+  - template: jinja
+  - require:
+    - pkg: neutron_server_packages
+  - watch_in:
+    - service: neutron_server_services
+
+{%- endif %}
+
+{%- endif %}
+
+neutron_server_services:
+  service.running:
+  - names: {{ server.services }}
+  - enable: true
+  - watch:
+    - file: /etc/neutron/neutron.conf
+
+{%- endif %}
diff --git a/other-requirements.txt b/other-requirements.txt
new file mode 100644
index 0000000..ba84cc5
--- /dev/null
+++ b/other-requirements.txt
@@ -0,0 +1 @@
+python-yaml
diff --git a/tests/pillar/control_cluster.sls b/tests/pillar/control_cluster.sls
new file mode 100644
index 0000000..3c669df
--- /dev/null
+++ b/tests/pillar/control_cluster.sls
@@ -0,0 +1,42 @@
+neutron:
+  server:
+    enabled: true
+    plugin: opencontrail
+    fwaas: false
+    dns_domain: novalocal
+    tunnel_type: vxlan
+    version: liberty
+    bind:
+      address: 127.0.0.1
+      port: 9696
+    database:
+      engine: mysql
+      host: 127.0.0.1
+      port: 3306
+      name: neutron
+      user: neutron
+      password: password
+    identity:
+      engine: keystone
+      region: RegionOne
+      host: 127.0.0.1
+      port: 35357
+      user: neutron
+      password: password
+      tenant: service
+    message_queue:
+      engine: rabbitmq
+      members:
+      - host: 127.0.0.1
+      - host: 127.0.1.1
+      - host: 127.0.2.1
+      user: openstack
+      password: password
+      virtual_host: '/openstack'
+      ha_queues: true
+    compute:
+      host: 127.0.0.1
+      region: RegionOne
+      user: nova
+      password: password
+      tenant: service
diff --git a/tests/pillar/control_single.sls b/tests/pillar/control_single.sls
new file mode 100644
index 0000000..0817493
--- /dev/null
+++ b/tests/pillar/control_single.sls
@@ -0,0 +1,39 @@
+neutron:
+  server:
+    enabled: true
+    plugin: ml2
+    fwaas: false
+    dns_domain: novalocal
+    tunnel_type: vxlan
+    version: liberty
+    bind:
+      address: 127.0.0.1
+      port: 9696
+    database:
+      engine: mysql
+      host: 127.0.0.1
+      port: 3306
+      name: neutron
+      user: neutron
+      password: password
+    identity:
+      engine: keystone
+      region: RegionOne
+      host: 127.0.0.1
+      port: 35357
+      user: neutron
+      password: password
+      tenant: service
+    message_queue:
+      engine: rabbitmq
+      host: 127.0.0.1
+      port: 5672
+      user: openstack
+      password: password
+      virtual_host: '/openstack'
+    compute:
+      host: 127.0.0.1
+      region: RegionOne
+      user: nova
+      password: password
+      tenant: service
diff --git a/tests/run_tests.sh b/tests/run_tests.sh
new file mode 100755
index 0000000..3f42101
--- /dev/null
+++ b/tests/run_tests.sh
@@ -0,0 +1,162 @@
+#!/usr/bin/env bash
+
+set -e
+[ -n "$DEBUG" ] && set -x
+
+CURDIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )"
+METADATA=${CURDIR}/../metadata.yml
+FORMULA_NAME=$(cat $METADATA | python -c "import sys,yaml; print yaml.load(sys.stdin)['name']")
+
+## Overrideable parameters
+PILLARDIR=${PILLARDIR:-${CURDIR}/pillar}
+BUILDDIR=${BUILDDIR:-${CURDIR}/build}
+VENV_DIR=${VENV_DIR:-${BUILDDIR}/virtualenv}
+DEPSDIR=${BUILDDIR}/deps
+
+SALT_FILE_DIR=${SALT_FILE_DIR:-${BUILDDIR}/file_root}
+SALT_PILLAR_DIR=${SALT_PILLAR_DIR:-${BUILDDIR}/pillar_root}
+SALT_CONFIG_DIR=${SALT_CONFIG_DIR:-${BUILDDIR}/salt}
+SALT_CACHE_DIR=${SALT_CACHE_DIR:-${SALT_CONFIG_DIR}/cache}
+
+SALT_OPTS="${SALT_OPTS} --retcode-passthrough --local -c ${SALT_CONFIG_DIR}"
+
+if [ "x${SALT_VERSION}" != "x" ]; then
+    PIP_SALT_VERSION="==${SALT_VERSION}"
+fi
+
+## Functions
+log_info() {
+    echo "[INFO] $*"
+}
+
+log_err() {
+    echo "[ERROR] $*" >&2
+}
+
+setup_virtualenv() {
+    log_info "Setting up Python virtualenv"
+    virtualenv $VENV_DIR
+    source ${VENV_DIR}/bin/activate
+    pip install salt${PIP_SALT_VERSION}
+}
+
+setup_pillar() {
+    [ ! -d ${SALT_PILLAR_DIR} ] && mkdir -p ${SALT_PILLAR_DIR}
+    echo "base:" > ${SALT_PILLAR_DIR}/top.sls
+    for pillar in ${PILLARDIR}/*; do
+        state_name=$(basename ${pillar%.sls})
+        echo -e "  ${state_name}:\n    - ${state_name}" >> ${SALT_PILLAR_DIR}/top.sls
+    done
+}
+
+setup_salt() {
+    [ ! -d ${SALT_FILE_DIR} ] && mkdir -p ${SALT_FILE_DIR}
+    [ ! -d ${SALT_CONFIG_DIR} ] && mkdir -p ${SALT_CONFIG_DIR}
+    [ ! -d ${SALT_CACHE_DIR} ] && mkdir -p ${SALT_CACHE_DIR}
+
+    echo "base:" > ${SALT_FILE_DIR}/top.sls
+    for pillar in ${PILLARDIR}/*.sls; do
+        state_name=$(basename ${pillar%.sls})
+        echo -e "  ${state_name}:\n    - ${FORMULA_NAME}" >> ${SALT_FILE_DIR}/top.sls
+    done
+
+    cat << EOF > ${SALT_CONFIG_DIR}/minion
+file_client: local
+cachedir: ${SALT_CACHE_DIR}
+verify_env: False
+
+file_roots:
+  base:
+  - ${SALT_FILE_DIR}
+  - ${CURDIR}/..
+  - /usr/share/salt-formulas/env
+
+pillar_roots:
+  base:
+  - ${SALT_PILLAR_DIR}
+  - ${PILLARDIR}
+EOF
+}
+
+fetch_dependency() {
+    dep_name="$(echo $1|cut -d : -f 1)"
+    dep_source="$(echo $1|cut -d : -f 2-)"
+    dep_root="${DEPSDIR}/$(basename $dep_source .git)"
+    dep_metadata="${dep_root}/metadata.yml"
+
+    [ -d /usr/share/salt-formulas/env/${dep_name} ] && log_info "Dependency $dep_name already present in system-wide salt env" && return 0
+    [ -d $dep_root ] && log_info "Dependency $dep_name already fetched" && return 0
+
+    log_info "Fetching dependency $dep_name"
+    [ ! -d ${DEPSDIR} ] && mkdir -p ${DEPSDIR}
+    git clone $dep_source ${DEPSDIR}/$(basename $dep_source .git)
+    ln -s ${dep_root}/${dep_name} ${SALT_FILE_DIR}/${dep_name}
+
+    METADATA="${dep_metadata}" install_dependencies
+}
+
+install_dependencies() {
+    grep -E "^dependencies:" ${METADATA} >/dev/null || return 0
+    (python - | while read dep; do fetch_dependency "$dep"; done) << EOF
+import sys,yaml
+for dep in yaml.load(open('${METADATA}', 'ro'))['dependencies']:
+    print '%s:%s' % (dep["name"], dep["source"])
+EOF
+}
+
+clean() {
+    log_info "Cleaning up ${BUILDDIR}"
+    [ -d ${BUILDDIR} ] && rm -rf ${BUILDDIR} || exit 0
+}
+
+salt_run() {
+    [ -e ${VEN_DIR}/bin/activate ] && source ${VENV_DIR}/bin/activate
+    salt-call ${SALT_OPTS} $*
+}
+
+prepare() {
+    [ -d ${BUILDDIR} ] && mkdir -p ${BUILDDIR}
+
+    which salt-call || setup_virtualenv
+    setup_pillar
+    setup_salt
+    install_dependencies
+}
+
+run() {
+    for pillar in ${PILLARDIR}/*.sls; do
+        state_name=$(basename ${pillar%.sls})
+        salt_run --id=${state_name} state.show_sls ${FORMULA_NAME} || (log_err "Execution of ${FORMULA_NAME}.${state_name} failed"; exit 1)
+    done
+}
+
+_atexit() {
+    RETVAL=$?
+    trap true INT TERM EXIT
+
+    if [ $RETVAL -ne 0 ]; then
+        log_err "Execution failed"
+    else
+        log_info "Execution successful"
+    fi
+    return $RETVAL
+}
+
+## Main
+trap _atexit INT TERM EXIT
+
+case $1 in
+    clean)
+        clean
+        ;;
+    prepare)
+        prepare
+        ;;
+    run)
+        run
+        ;;
+    *)
+        prepare
+        run
+        ;;
+esac