diff --git a/neutron/files/mitaka/dhcp_agent.ini b/neutron/files/mitaka/dhcp_agent.ini
new file mode 100644
index 0000000..908086d
--- /dev/null
+++ b/neutron/files/mitaka/dhcp_agent.ini
@@ -0,0 +1,184 @@
+[DEFAULT]
+
+#
+# From neutron.base.agent
+#
+
+# Name of Open vSwitch bridge to use (string value)
+#ovs_integration_bridge = br-int
+
+# Uses veth for an OVS interface or not. Support kernels with limited namespace support (e.g. RHEL 6.5) so long as ovs_use_veth is set to
+# True. (boolean value)
+#ovs_use_veth = false
+
+# MTU setting for device. This option will be removed in Newton. Please use the system-wide global_physnet_mtu setting which the agents will
+# take into account when wiring VIFs. (integer value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#network_device_mtu = <None>
+
+# The driver used to manage the virtual interface. (string value)
+#interface_driver = <None>
+interface_driver = neutron.agent.linux.interface.OVSInterfaceDriver
+
+# Timeout in seconds for ovs-vsctl commands. If the timeout expires, ovs commands will fail with ALARMCLOCK error. (integer value)
+#ovs_vsctl_timeout = 10
+
+#
+# From neutron.dhcp.agent
+#
+
+# The DHCP agent will resync its state with Neutron to recover from any transient notification or RPC errors. The interval is number of
+# seconds between attempts. (integer value)
+#resync_interval = 5
+resync_interval = 30
+
+# The driver used to manage the DHCP server. (string value)
+#dhcp_driver = neutron.agent.linux.dhcp.Dnsmasq
+dhcp_driver = neutron.agent.linux.dhcp.Dnsmasq
+
+# The DHCP server can assist with providing metadata support on isolated networks. Setting this value to True will cause the DHCP server to
+# append specific host routes to the DHCP request. The metadata service will only be activated when the subnet does not contain any router
+# port. The guest instance must be configured to request host routes via DHCP (Option 121). This option doesn't have any effect when
+# force_metadata is set to True. (boolean value)
+#enable_isolated_metadata = false
+enable_isolated_metadata = True
+
+# In some cases the Neutron router is not present to provide the metadata IP but the DHCP server can be used to provide this info. Setting
+# this value will force the DHCP server to append specific host routes to the DHCP request. If this option is set, then the metadata service
+# will be activated for all the networks. (boolean value)
+#force_metadata = false
+
+# Allows for serving metadata requests coming from a dedicated metadata access network whose CIDR is 169.254.169.254/16 (or larger prefix),
+# and is connected to a Neutron router from which the VMs send metadata:1 request. In this case DHCP Option 121 will not be injected in VMs,
+# as they will be able to reach 169.254.169.254 through a router. This option requires enable_isolated_metadata = True. (boolean value)
+#enable_metadata_network = false
+enable_metadata_network = False
+
+# Number of threads to use during sync process. Should not exceed connection pool size configured on server. (integer value)
+#num_sync_threads = 4
+
+# Location to store DHCP server config files. (string value)
+#dhcp_confs = $state_path/dhcp
+
+# Domain to use for building the hostnames. This option is deprecated. It has been moved to neutron.conf as dns_domain. It will be removed
+# in a future release. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#dhcp_domain = openstacklocal
+
+# Override the default dnsmasq settings with this file. (string value)
+#dnsmasq_config_file =
+
+# Comma-separated list of the DNS servers which will be used as forwarders. (list value)
+# Deprecated group/name - [DEFAULT]/dnsmasq_dns_server
+#dnsmasq_dns_servers = <None>
+
+# Base log dir for dnsmasq logging. The log contains DHCP and DNS log information and is useful for debugging issues with either DHCP or
+# DNS. If this section is null, disable dnsmasq log. (string value)
+#dnsmasq_base_log_dir = <None>
+
+# Enables the dnsmasq service to provide name resolution for instances via DNS resolvers on the host running the DHCP agent. Effectively
+# removes the '--no-resolv' option from the dnsmasq process arguments. Adding custom DNS resolvers to the 'dnsmasq_dns_servers' option
+# disables this feature. (boolean value)
+#dnsmasq_local_resolv = false
+
+# Limit number of leases to prevent a denial-of-service. (integer value)
+#dnsmasq_lease_max = 16777216
+
+# Use broadcast in DHCP replies. (boolean value)
+#dhcp_broadcast_reply = false
+
+#
+# From oslo.log
+#
+
+# If set to true, the logging level will be set to DEBUG instead of the default INFO level. (boolean value)
+#debug = false
+debug = False
+
+# If set to false, the logging level will be set to WARNING instead of the default INFO level. (boolean value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#verbose = true
+
+# The name of a logging configuration file. This file is appended to any existing logging configuration files. For details about logging
+# configuration files, see the Python logging module documentation. Note that when logging configuration files are used then all logging
+# configuration is set in the configuration file and other logging configuration options are ignored (for example,
+# logging_context_format_string). (string value)
+# Deprecated group/name - [DEFAULT]/log_config
+#log_config_append = <None>
+
+# Defines the format string for %%(asctime)s in log records. Default: %(default)s . This option is ignored if log_config_append is set.
+# (string value)
+#log_date_format = %Y-%m-%d %H:%M:%S
+
+# (Optional) Name of log file to send logging output to. If no default is set, logging will go to stderr as defined by use_stderr. This
+# option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logfile
+#log_file = <None>
+
+# (Optional) The base directory used for relative log_file  paths. This option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logdir
+#log_dir = <None>
+
+# Uses logging handler designed to watch file system. When log file is moved or removed this handler will open a new log file with specified
+# path instantaneously. It makes sense only if log_file option is specified and Linux platform is used. This option is ignored if
+# log_config_append is set. (boolean value)
+#watch_log_file = false
+
+# Use syslog for logging. Existing syslog format is DEPRECATED and will be changed later to honor RFC5424. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_syslog = false
+
+# Syslog facility to receive log lines. This option is ignored if log_config_append is set. (string value)
+#syslog_log_facility = LOG_USER
+
+# Log output to standard error. This option is ignored if log_config_append is set. (boolean value)
+#use_stderr = true
+
+# Format string to use for log messages with context. (string value)
+#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
+
+# Format string to use for log messages when context is undefined. (string value)
+#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
+
+# Additional data to append to log message when logging level for the message is DEBUG. (string value)
+#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
+
+# Prefix each line of exception output with this format. (string value)
+#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
+
+# Defines the format string for %(user_identity)s that is used in logging_context_format_string. (string value)
+#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
+
+# List of package logging levels in logger=LEVEL pairs. This option is ignored if log_config_append is set. (list value)
+#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
+
+# Enables or disables publication of error events. (boolean value)
+#publish_errors = false
+
+# The format for an instance that is passed with the log message. (string value)
+#instance_format = "[instance: %(uuid)s] "
+
+# The format for an instance UUID that is passed with the log message. (string value)
+#instance_uuid_format = "[instance: %(uuid)s] "
+
+# Enables or disables fatal status of deprecations. (boolean value)
+#fatal_deprecations = false
+root_helper=sudo neutron-rootwrap /etc/neutron/rootwrap.conf
+state_path=/var/lib/neutron
+
+
+[AGENT]
+
+#
+# From neutron.base.agent
+#
+
+# Seconds between nodes reporting state to server; should be less than agent_down_time, best if it is half or less than agent_down_time.
+# (floating point value)
+#report_interval = 30
+
+# Log agent heartbeats (boolean value)
+#log_agent_heartbeats = false
diff --git a/neutron/files/mitaka/l3_agent.ini b/neutron/files/mitaka/l3_agent.ini
new file mode 100644
index 0000000..0095ab7
--- /dev/null
+++ b/neutron/files/mitaka/l3_agent.ini
@@ -0,0 +1,230 @@
+{%- if pillar.neutron.gateway is defined %}
+{%- from "neutron/map.jinja" import gateway as neutron with context %}
+{%- else %}
+{%- from "neutron/map.jinja" import compute as neutron with context %}
+{%- endif %}
+
+[DEFAULT]
+
+#
+# From neutron.base.agent
+#
+
+# Name of Open vSwitch bridge to use (string value)
+#ovs_integration_bridge = br-int
+
+# Uses veth for an OVS interface or not. Support kernels with limited namespace support (e.g. RHEL 6.5) so long as ovs_use_veth is set to
+# True. (boolean value)
+#ovs_use_veth = false
+
+# MTU setting for device. This option will be removed in Newton. Please use the system-wide global_physnet_mtu setting which the agents will
+# take into account when wiring VIFs. (integer value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#network_device_mtu = <None>
+
+# The driver used to manage the virtual interface. (string value)
+#interface_driver = <None>
+interface_driver = neutron.agent.linux.interface.OVSInterfaceDriver
+
+# Timeout in seconds for ovs-vsctl commands. If the timeout expires, ovs commands will fail with ALARMCLOCK error. (integer value)
+#ovs_vsctl_timeout = 10
+
+#
+# From neutron.l3.agent
+#
+
+# The working mode for the agent. Allowed modes are: 'legacy' - this preserves the existing behavior where the L3 agent is deployed on a
+# centralized networking node to provide L3 services like DNAT, and SNAT. Use this mode if you do not want to adopt DVR. 'dvr' - this mode
+# enables DVR functionality and must be used for an L3 agent that runs on a compute host. 'dvr_snat' - this enables centralized SNAT support
+# in conjunction with DVR.  This mode must be used for an L3 agent running on a centralized node (or in single-host deployments, e.g.
+# devstack) (string value)
+# Allowed values: dvr, dvr_snat, legacy
+#agent_mode = legacy
+agent_mode = {{ neutron.agent_mode }}
+
+# TCP Port used by Neutron metadata namespace proxy. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#metadata_port = 9697
+metadata_port = 8775
+
+# Send this many gratuitous ARPs for HA setup, if less than or equal to 0, the feature is disabled (integer value)
+#send_arp_for_ha = 3
+
+# If non-empty, the l3 agent can only configure a router that has the matching router ID. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#router_id =
+
+# Indicates that this L3 agent should also handle routers that do not have an external network gateway configured. This option should be
+# True only for a single agent in a Neutron deployment, and may be False for all agents if all routers must have an external network
+# gateway. (boolean value)
+#handle_internal_only_routers = true
+
+# When external_network_bridge is set, each L3 agent can be associated with no more than one external network. This value should be set to
+# the UUID of that external network. To allow L3 agent support multiple external networks, both the external_network_bridge and
+# gateway_external_network_id must be left empty. (string value)
+#gateway_external_network_id =
+
+# With IPv6, the network used for the external gateway does not need to have an associated subnet, since the automatically assigned link-
+# local address (LLA) can be used. However, an IPv6 gateway address is needed for use as the next-hop for the default route. If no IPv6
+# gateway address is configured here, (and only then) the neutron router will be configured to get its default route from router
+# advertisements (RAs) from the upstream router; in which case the upstream router must also be configured to send these RAs. The
+# ipv6_gateway, when configured, should be the LLA of the interface on the upstream router. If a next-hop using a global unique address
+# (GUA) is desired, it needs to be done via a subnet allocated to the network and not through this parameter.  (string value)
+#ipv6_gateway =
+
+# Driver used for ipv6 prefix delegation. This needs to be an entry point defined in the neutron.agent.linux.pd_drivers namespace. See
+# setup.cfg for entry points included with the neutron source. (string value)
+#prefix_delegation_driver = dibbler
+
+# Allow running metadata proxy. (boolean value)
+#enable_metadata_proxy = true
+
+# Iptables mangle mark used to mark metadata valid requests. This mark will be masked with 0xffff so that only the lower 16 bits will be
+# used. (string value)
+#metadata_access_mark = 0x1
+
+# Iptables mangle mark used to mark ingress from external network. This mark will be masked with 0xffff so that only the lower 16 bits will
+# be used. (string value)
+#external_ingress_mark = 0x2
+
+# Name of bridge used for external network traffic. This should be set to an empty value for the Linux Bridge. When this parameter is set,
+# each L3 agent can be associated with no more than one external network. (string value)
+#external_network_bridge = br-ex
+external_network_bridge = 
+
+# Seconds between running periodic tasks (integer value)
+#periodic_interval = 40
+
+# Number of separate API worker processes for service. If not specified, the default is equal to the number of CPUs available for best
+# performance. (integer value)
+#api_workers = <None>
+
+# Number of RPC worker processes for service (integer value)
+#rpc_workers = 1
+
+# Number of RPC worker processes dedicated to state reports queue (integer value)
+#rpc_state_report_workers = 1
+
+# Range of seconds to randomly delay when starting the periodic task scheduler to reduce stampeding. (Disable by setting to 0) (integer
+# value)
+#periodic_fuzzy_delay = 5
+
+# Location to store keepalived/conntrackd config files (string value)
+#ha_confs_path = $state_path/ha_confs
+
+# VRRP authentication type (string value)
+# Allowed values: AH, PASS
+#ha_vrrp_auth_type = PASS
+
+# VRRP authentication password (string value)
+#ha_vrrp_auth_password = <None>
+
+# The advertisement interval in seconds (integer value)
+#ha_vrrp_advert_int = 2
+
+# Service to handle DHCPv6 Prefix delegation. (string value)
+#pd_dhcp_driver = dibbler
+
+# Location to store IPv6 RA config files (string value)
+#ra_confs = $state_path/ra
+
+# MinRtrAdvInterval setting for radvd.conf (integer value)
+#min_rtr_adv_interval = 30
+
+# MaxRtrAdvInterval setting for radvd.conf (integer value)
+#max_rtr_adv_interval = 100
+
+#
+# From oslo.log
+#
+
+# If set to true, the logging level will be set to DEBUG instead of the default INFO level. (boolean value)
+#debug = false
+debug = False
+
+# If set to false, the logging level will be set to WARNING instead of the default INFO level. (boolean value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#verbose = true
+
+# The name of a logging configuration file. This file is appended to any existing logging configuration files. For details about logging
+# configuration files, see the Python logging module documentation. Note that when logging configuration files are used then all logging
+# configuration is set in the configuration file and other logging configuration options are ignored (for example,
+# logging_context_format_string). (string value)
+# Deprecated group/name - [DEFAULT]/log_config
+#log_config_append = <None>
+
+# Defines the format string for %%(asctime)s in log records. Default: %(default)s . This option is ignored if log_config_append is set.
+# (string value)
+#log_date_format = %Y-%m-%d %H:%M:%S
+
+# (Optional) Name of log file to send logging output to. If no default is set, logging will go to stderr as defined by use_stderr. This
+# option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logfile
+#log_file = <None>
+
+# (Optional) The base directory used for relative log_file  paths. This option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logdir
+#log_dir = <None>
+
+# Uses logging handler designed to watch file system. When log file is moved or removed this handler will open a new log file with specified
+# path instantaneously. It makes sense only if log_file option is specified and Linux platform is used. This option is ignored if
+# log_config_append is set. (boolean value)
+#watch_log_file = false
+
+# Use syslog for logging. Existing syslog format is DEPRECATED and will be changed later to honor RFC5424. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_syslog = false
+
+# Syslog facility to receive log lines. This option is ignored if log_config_append is set. (string value)
+#syslog_log_facility = LOG_USER
+
+# Log output to standard error. This option is ignored if log_config_append is set. (boolean value)
+#use_stderr = true
+
+# Format string to use for log messages with context. (string value)
+#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
+
+# Format string to use for log messages when context is undefined. (string value)
+#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
+
+# Additional data to append to log message when logging level for the message is DEBUG. (string value)
+#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
+
+# Prefix each line of exception output with this format. (string value)
+#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
+
+# Defines the format string for %(user_identity)s that is used in logging_context_format_string. (string value)
+#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
+
+# List of package logging levels in logger=LEVEL pairs. This option is ignored if log_config_append is set. (list value)
+#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
+
+# Enables or disables publication of error events. (boolean value)
+#publish_errors = false
+
+# The format for an instance that is passed with the log message. (string value)
+#instance_format = "[instance: %(uuid)s] "
+
+# The format for an instance UUID that is passed with the log message. (string value)
+#instance_uuid_format = "[instance: %(uuid)s] "
+
+# Enables or disables fatal status of deprecations. (boolean value)
+#fatal_deprecations = false
+
+
+[AGENT]
+
+#
+# From neutron.base.agent
+#
+
+# Seconds between nodes reporting state to server; should be less than agent_down_time, best if it is half or less than agent_down_time.
+# (floating point value)
+#report_interval = 30
+
+# Log agent heartbeats (boolean value)
+#log_agent_heartbeats = false
diff --git a/neutron/files/mitaka/metadata_agent.ini b/neutron/files/mitaka/metadata_agent.ini
new file mode 100644
index 0000000..15c21ac
--- /dev/null
+++ b/neutron/files/mitaka/metadata_agent.ini
@@ -0,0 +1,158 @@
+{%- if pillar.neutron.gateway is defined %}
+{%- from "neutron/map.jinja" import gateway as neutron with context %}
+{%- else %}
+{%- from "neutron/map.jinja" import compute as neutron with context %}
+{%- endif %}
+[DEFAULT]
+
+#
+# From neutron.metadata.agent
+#
+
+# Location for Metadata Proxy UNIX domain socket. (string value)
+#metadata_proxy_socket = $state_path/metadata_proxy
+
+# User (uid or name) running metadata proxy after its initialization (if empty: agent effective user). (string value)
+#metadata_proxy_user =
+
+# Group (gid or name) running metadata proxy after its initialization (if empty: agent effective group). (string value)
+#metadata_proxy_group =
+
+# Certificate Authority public key (CA cert) file for ssl (string value)
+#auth_ca_cert = <None>
+
+# IP address used by Nova metadata server. (string value)
+#nova_metadata_ip = 127.0.0.1
+nova_metadata_ip = {{ neutron.metadata.host }}
+
+# TCP Port used by Nova metadata server. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#nova_metadata_port = 8775
+
+# When proxying metadata requests, Neutron signs the Instance-ID header with a shared secret to prevent spoofing. You may select any string
+# for a secret, but it must match here and in the configuration used by the Nova Metadata Server. NOTE: Nova uses the same config key, but
+# in [neutron] section. (string value)
+metadata_proxy_shared_secret = {{ neutron.metadata.password }}
+
+# Protocol to access nova metadata, http or https (string value)
+# Allowed values: http, https
+#nova_metadata_protocol = http
+nova_metadata_protocol = http
+
+# Allow to perform insecure SSL (https) requests to nova metadata (boolean value)
+#nova_metadata_insecure = false
+
+# Client certificate for nova metadata api server. (string value)
+#nova_client_cert =
+
+# Private key of client certificate. (string value)
+#nova_client_priv_key =
+
+# Metadata Proxy UNIX domain socket mode, 4 values allowed: 'deduce': deduce mode from metadata_proxy_user/group values, 'user': set
+# metadata proxy socket mode to 0o644, to use when metadata_proxy_user is agent effective user or root, 'group': set metadata proxy socket
+# mode to 0o664, to use when metadata_proxy_group is agent effective group or root, 'all': set metadata proxy socket mode to 0o666, to use
+# otherwise. (string value)
+# Allowed values: deduce, user, group, all
+#metadata_proxy_socket_mode = deduce
+
+# Number of separate worker processes for metadata server (defaults to half of the number of CPUs) (integer value)
+#metadata_workers = 4
+
+# Number of backlog requests to configure the metadata server socket with (integer value)
+#metadata_backlog = 4096
+
+# URL to connect to the cache back end. (string value)
+#cache_url = memory://
+
+#
+# From oslo.log
+#
+
+# If set to true, the logging level will be set to DEBUG instead of the default INFO level. (boolean value)
+#debug = false
+debug = False
+
+# If set to false, the logging level will be set to WARNING instead of the default INFO level. (boolean value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#verbose = true
+
+# The name of a logging configuration file. This file is appended to any existing logging configuration files. For details about logging
+# configuration files, see the Python logging module documentation. Note that when logging configuration files are used then all logging
+# configuration is set in the configuration file and other logging configuration options are ignored (for example,
+# logging_context_format_string). (string value)
+# Deprecated group/name - [DEFAULT]/log_config
+#log_config_append = <None>
+
+# Defines the format string for %%(asctime)s in log records. Default: %(default)s . This option is ignored if log_config_append is set.
+# (string value)
+#log_date_format = %Y-%m-%d %H:%M:%S
+
+# (Optional) Name of log file to send logging output to. If no default is set, logging will go to stderr as defined by use_stderr. This
+# option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logfile
+#log_file = <None>
+
+# (Optional) The base directory used for relative log_file  paths. This option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logdir
+#log_dir = <None>
+
+# Uses logging handler designed to watch file system. When log file is moved or removed this handler will open a new log file with specified
+# path instantaneously. It makes sense only if log_file option is specified and Linux platform is used. This option is ignored if
+# log_config_append is set. (boolean value)
+#watch_log_file = false
+
+# Use syslog for logging. Existing syslog format is DEPRECATED and will be changed later to honor RFC5424. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_syslog = false
+
+# Syslog facility to receive log lines. This option is ignored if log_config_append is set. (string value)
+#syslog_log_facility = LOG_USER
+
+# Log output to standard error. This option is ignored if log_config_append is set. (boolean value)
+#use_stderr = true
+
+# Format string to use for log messages with context. (string value)
+#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
+
+# Format string to use for log messages when context is undefined. (string value)
+#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
+
+# Additional data to append to log message when logging level for the message is DEBUG. (string value)
+#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
+
+# Prefix each line of exception output with this format. (string value)
+#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
+
+# Defines the format string for %(user_identity)s that is used in logging_context_format_string. (string value)
+#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
+
+# List of package logging levels in logger=LEVEL pairs. This option is ignored if log_config_append is set. (list value)
+#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
+
+# Enables or disables publication of error events. (boolean value)
+#publish_errors = false
+
+# The format for an instance that is passed with the log message. (string value)
+#instance_format = "[instance: %(uuid)s] "
+
+# The format for an instance UUID that is passed with the log message. (string value)
+#instance_uuid_format = "[instance: %(uuid)s] "
+
+# Enables or disables fatal status of deprecations. (boolean value)
+#fatal_deprecations = false
+
+
+[AGENT]
+
+#
+# From neutron.metadata.agent
+#
+
+# Seconds between nodes reporting state to server; should be less than agent_down_time, best if it is half or less than agent_down_time.
+# (floating point value)
+#report_interval = 30
+
+# Log agent heartbeats (boolean value)
+#log_agent_heartbeats = false
diff --git a/neutron/files/mitaka/ml2_conf.ini b/neutron/files/mitaka/ml2_conf.ini
new file mode 100644
index 0000000..d455fb9
--- /dev/null
+++ b/neutron/files/mitaka/ml2_conf.ini
@@ -0,0 +1,208 @@
+{%- from "neutron/map.jinja" import server with context %}
+[DEFAULT]
+
+#
+# From oslo.log
+#
+
+# If set to true, the logging level will be set to DEBUG instead of the default INFO level. (boolean value)
+#debug = false
+
+# If set to false, the logging level will be set to WARNING instead of the default INFO level. (boolean value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#verbose = true
+
+# The name of a logging configuration file. This file is appended to any existing logging configuration files. For details about logging
+# configuration files, see the Python logging module documentation. Note that when logging configuration files are used then all logging
+# configuration is set in the configuration file and other logging configuration options are ignored (for example,
+# logging_context_format_string). (string value)
+# Deprecated group/name - [DEFAULT]/log_config
+#log_config_append = <None>
+
+# Defines the format string for %%(asctime)s in log records. Default: %(default)s . This option is ignored if log_config_append is set.
+# (string value)
+#log_date_format = %Y-%m-%d %H:%M:%S
+
+# (Optional) Name of log file to send logging output to. If no default is set, logging will go to stderr as defined by use_stderr. This
+# option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logfile
+#log_file = <None>
+
+# (Optional) The base directory used for relative log_file  paths. This option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logdir
+#log_dir = <None>
+
+# Uses logging handler designed to watch file system. When log file is moved or removed this handler will open a new log file with specified
+# path instantaneously. It makes sense only if log_file option is specified and Linux platform is used. This option is ignored if
+# log_config_append is set. (boolean value)
+#watch_log_file = false
+
+# Use syslog for logging. Existing syslog format is DEPRECATED and will be changed later to honor RFC5424. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_syslog = false
+
+# Syslog facility to receive log lines. This option is ignored if log_config_append is set. (string value)
+#syslog_log_facility = LOG_USER
+
+# Log output to standard error. This option is ignored if log_config_append is set. (boolean value)
+#use_stderr = true
+
+# Format string to use for log messages with context. (string value)
+#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
+
+# Format string to use for log messages when context is undefined. (string value)
+#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
+
+# Additional data to append to log message when logging level for the message is DEBUG. (string value)
+#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
+
+# Prefix each line of exception output with this format. (string value)
+#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
+
+# Defines the format string for %(user_identity)s that is used in logging_context_format_string. (string value)
+#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
+
+# List of package logging levels in logger=LEVEL pairs. This option is ignored if log_config_append is set. (list value)
+#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
+
+# Enables or disables publication of error events. (boolean value)
+#publish_errors = false
+
+# The format for an instance that is passed with the log message. (string value)
+#instance_format = "[instance: %(uuid)s] "
+
+# The format for an instance UUID that is passed with the log message. (string value)
+#instance_uuid_format = "[instance: %(uuid)s] "
+
+# Enables or disables fatal status of deprecations. (boolean value)
+#fatal_deprecations = false
+
+
+[ml2]
+
+#
+# From neutron.ml2
+#
+
+# List of network type driver entrypoints to be loaded from the neutron.ml2.type_drivers namespace. (list value)
+#type_drivers = local,flat,vlan,gre,vxlan,geneve
+type_drivers = local,flat,vlan,gre,vxlan
+
+# Ordered list of network_types to allocate as tenant networks. The default value 'local' is useful for single-box testing but provides no
+# connectivity between hosts. (list value)
+#tenant_network_types = local
+tenant_network_types = {{ server.backend.tenant_network_types }}
+
+# An ordered list of networking mechanism driver entrypoints to be loaded from the neutron.ml2.mechanism_drivers namespace. (list value)
+#mechanism_drivers =openvswitch,l2population
+mechanism_drivers ={%- for backend_name, mechanism in server.backend.get('mechanism', {}).iteritems() %}{{ mechanism.driver }},{%- endfor %}l2population
+
+# An ordered list of extension driver entrypoints to be loaded from the neutron.ml2.extension_drivers namespace. For example:
+# extension_drivers = port_security,qos (list value)
+extension_drivers = port_security
+#extension_drivers =
+
+# Maximum size of an IP packet (MTU) that can traverse the underlying physical network infrastructure without fragmentation for
+# overlay/tunnel networks. In most cases, use the same value as the global_physnet_mtu option. (integer value)
+#path_mtu = 1500
+path_mtu = {{ server.get('global_physnet_mtu', '1500') }}
+
+# A list of mappings of physical networks to MTU values. The format of the mapping is <physnet>:<mtu val>. This mapping allows specifying a
+# physical network MTU value that differs from the default global_physnet_mtu value. (list value)
+#physical_network_mtus =
+physical_network_mtus =physnet1:{{ server.backend.get('external_mtu', '1500') }}{%- if "vlan" in server.backend.tenant_network_types %},physnet2:{{ server.backend.get('external_mtu', '1500') }}{%- endif %}
+
+# Default network type for external networks when no provider attributes are specified. By default it is None, which means that if provider
+# attributes are not specified while creating external networks then they will have the same type as tenant networks. Allowed values for
+# external_network_type config option depend on the network type values configured in type_drivers config option. (string value)
+#external_network_type = <None>
+
+
+[ml2_type_flat]
+
+#
+# From neutron.ml2
+#
+
+# List of physical_network names with which flat networks can be created. Use default '*' to allow flat networks with arbitrary
+# physical_network names. Use an empty list to disable flat networks. (list value)
+#flat_networks = *
+flat_networks = *
+
+
+[ml2_type_geneve]
+
+#
+# From neutron.ml2
+#
+
+# Comma-separated list of <vni_min>:<vni_max> tuples enumerating ranges of Geneve VNI IDs that are available for tenant network allocation
+# (list value)
+#vni_ranges =
+
+# Geneve encapsulation header size is dynamic, this value is used to calculate the maximum MTU for the driver. This is the sum of the sizes
+# of the outer ETH + IP + UDP + GENEVE header sizes. The default size for this field is 50, which is the size of the Geneve header without
+# any additional option headers. (integer value)
+#max_header_size = 50
+
+
+[ml2_type_gre]
+
+#
+# From neutron.ml2
+#
+
+# Comma-separated list of <tun_min>:<tun_max> tuples enumerating ranges of GRE tunnel IDs that are available for tenant network allocation
+# (list value)
+#tunnel_id_ranges =
+tunnel_id_ranges =2:65535
+
+
+[ml2_type_vlan]
+
+#
+# From neutron.ml2
+#
+
+# List of <physical_network>:<vlan_min>:<vlan_max> or <physical_network> specifying physical_network names usable for VLAN provider and
+# tenant networks, as well as ranges of VLAN tags on each available for allocation to tenant networks. (list value)
+#network_vlan_ranges =
+network_vlan_ranges ={%- if "vlan" in server.backend.tenant_network_types %}physnet1{%- if server.backend.external_vlan_range is defined %}:{{ server.backend.external_vlan_range }}{%- endif %},physnet2:{{ server.backend.tenant_vlan_range }}{%- endif %}
+
+
+[ml2_type_vxlan]
+
+#
+# From neutron.ml2
+#
+
+# Comma-separated list of <vni_min>:<vni_max> tuples enumerating ranges of VXLAN VNI IDs that are available for tenant network allocation
+# (list value)
+#vni_ranges =
+vni_ranges =2:65535
+
+# Multicast group for VXLAN. When configured, will enable sending all broadcast traffic to this multicast group. When left unconfigured,
+# will disable multicast VXLAN mode. (string value)
+#vxlan_group = <None>
+vxlan_group = 224.0.0.1
+
+
+[securitygroup]
+
+#
+# From neutron.ml2
+#
+
+# Driver for security groups firewall in the L2 agent (string value)
+#firewall_driver = <None>
+firewall_driver = neutron.agent.linux.iptables_firewall.OVSHybridIptablesFirewallDriver
+
+# Controls whether the neutron security group API is enabled in the server. It should be false when using no security groups or using the
+# nova security group API. (boolean value)
+#enable_security_group = true
+enable_security_group = True
+
+# Use ipset to speed-up the iptables based security groups. Enabling ipset support requires that ipset is installed on L2 agent node.
+# (boolean value)
+#enable_ipset = true
diff --git a/neutron/files/mitaka/neutron-generic.conf.Debian b/neutron/files/mitaka/neutron-generic.conf.Debian
new file mode 100644
index 0000000..57e64f6
--- /dev/null
+++ b/neutron/files/mitaka/neutron-generic.conf.Debian
@@ -0,0 +1,1554 @@
+{%- if pillar.neutron.gateway is defined %}
+{%- from "neutron/map.jinja" import gateway as neutron with context %}
+{%- else %}
+{%- from "neutron/map.jinja" import compute as neutron with context %}
+{%- endif %}
+[DEFAULT]
+
+#
+# From neutron
+#
+
+# Where to store Neutron state files. This directory must be writable by the
+# agent. (string value)
+#state_path = /var/lib/neutron
+state_path = /var/lib/neutron
+
+
+
+# The path for API extensions. Note that this can be a colon-separated list of
+# paths. For example: api_extensions_path =
+# extensions:/path/to/more/exts:/even/more/exts. The __path__ of
+# neutron.extensions is appended to this, so if your extensions are in there
+# you don't need to specify them here. (string value)
+
+{% if neutron.backend.engine == "ml2" %}
+
+core_plugin = neutron.plugins.ml2.plugin.Ml2Plugin
+
+service_plugins =neutron.services.l3_router.l3_router_plugin.L3RouterPlugin,neutron.services.metering.metering_plugin.MeteringPlugin
+
+{% endif %}
+
+# The type of authentication to use (string value)
+#auth_strategy = keystone
+auth_strategy = keystone
+
+# The service plugins Neutron will use (list value)
+# The base MAC address Neutron will use for VIFs. The first 3 octets will
+# remain unchanged. If the 4th octet is not 00, it will also be used. The
+# others will be randomly generated. (string value)
+#base_mac = fa:16:3e:00:00:00
+
+# How many times Neutron will retry MAC generation (integer value)
+#mac_generation_retries = 16
+mac_generation_retries = 32
+
+# Allow the usage of the bulk API (boolean value)
+#allow_bulk = true
+
+# Allow the usage of the pagination (boolean value)
+#allow_pagination = false
+
+# Allow the usage of the sorting (boolean value)
+#allow_sorting = false
+
+# The maximum number of items returned in a single response, value was
+# 'infinite' or negative integer means no limit (string value)
+#pagination_max_limit = -1
+
+# Default value of availability zone hints. The availability zone aware
+# schedulers use this when the resources availability_zone_hints is empty.
+# Multiple availability zones can be specified by a comma separated string.
+# This value can be empty. In this case, even if availability_zone_hints for a
+# resource is empty, availability zone is considered for high availability
+# while scheduling the resource. (list value)
+#default_availability_zones =
+
+# Maximum number of DNS nameservers per subnet (integer value)
+#max_dns_nameservers = 5
+
+# Maximum number of host routes per subnet (integer value)
+#max_subnet_host_routes = 20
+
+# Maximum number of fixed ips per port. This option is deprecated and will be
+# removed in the N release. (integer value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#max_fixed_ips_per_port = 5
+
+# Default IPv4 subnet pool to be used for automatic subnet CIDR allocation.
+# Specifies by UUID the pool to be used in case where creation of a subnet is
+# being called without a subnet pool ID. If not set then no pool will be used
+# unless passed explicitly to the subnet create. If no pool is used, then a
+# CIDR must be passed to create a subnet and that subnet will not be allocated
+# from any pool; it will be considered part of the tenant's private address
+# space. This option is deprecated for removal in the N release. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#default_ipv4_subnet_pool = <None>
+
+# Default IPv6 subnet pool to be used for automatic subnet CIDR allocation.
+# Specifies by UUID the pool to be used in case where creation of a subnet is
+# being called without a subnet pool ID. See the description for
+# default_ipv4_subnet_pool for more information. This option is deprecated for
+# removal in the N release. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#default_ipv6_subnet_pool = <None>
+
+# Enables IPv6 Prefix Delegation for automatic subnet CIDR allocation. Set to
+# True to enable IPv6 Prefix Delegation for subnet allocation in a PD-capable
+# environment. Users making subnet creation requests for IPv6 subnets without
+# providing a CIDR or subnetpool ID will be given a CIDR via the Prefix
+# Delegation mechanism. Note that enabling PD will override the behavior of the
+# default IPv6 subnetpool. (boolean value)
+#ipv6_pd_enabled = false
+
+# DHCP lease duration (in seconds). Use -1 to tell dnsmasq to use infinite
+# lease times. (integer value)
+# Deprecated group/name - [DEFAULT]/dhcp_lease_time
+#dhcp_lease_duration = 86400
+dhcp_lease_duration = 600
+
+# Domain to use for building the hostnames (string value)
+#dns_domain = openstacklocal
+
+# Driver for external DNS integration. (string value)
+#external_dns_driver = <None>
+
+# Allow sending resource operation notification to DHCP agent (boolean value)
+#dhcp_agent_notification = true
+
+# Allow overlapping IP support in Neutron. Attention: the following parameter
+# MUST be set to False if Neutron is being used in conjunction with Nova
+# security groups. (boolean value)
+#allow_overlapping_ips = false
+allow_overlapping_ips = True
+
+# Hostname to be used by the Neutron server, agents and services running on
+# this machine. All the agents and services running on this machine must use
+# the same host value. (string value)
+#host = example.domain
+
+# Ensure that configured gateway is on subnet. For IPv6, validate only if
+# gateway is not a link local address. Deprecated, to be removed during the
+# Newton release, at which point the gateway will not be forced on to subnet.
+# (boolean value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#force_gateway_on_subnet = true
+
+# Send notification to nova when port status changes (boolean value)
+#notify_nova_on_port_status_changes = true
+notify_nova_on_port_status_changes = True
+
+# Send notification to nova when port data (fixed_ips/floatingip) changes so
+# nova can update its cache. (boolean value)
+#notify_nova_on_port_data_changes = true
+notify_nova_on_port_data_changes = True
+
+# Number of seconds between sending events to nova if there are any events to
+# send. (integer value)
+#send_events_interval = 2
+
+# If True, advertise network MTU values if core plugin calculates them. MTU is
+# advertised to running instances via DHCP and RA MTU options. (boolean value)
+#advertise_mtu = true
+advertise_mtu = True
+
+# Neutron IPAM (IP address management) driver to use. If ipam_driver is not set
+# (default behavior), no IPAM driver is used. In order to use the reference
+# implementation of Neutron IPAM driver, use 'internal'. (string value)
+#ipam_driver = <None>
+
+# If True, then allow plugins that support it to create VLAN transparent
+# networks. (boolean value)
+#vlan_transparent = false
+
+# This will choose the web framework in which to run the Neutron API server.
+# 'pecan' is a new experiemental rewrite of the API server. (string value)
+# Allowed values: legacy, pecan
+#web_framework = legacy
+
+# MTU of the underlying physical network. Neutron uses this value to calculate
+# MTU for all virtual network components. For flat and VLAN networks, neutron
+# uses this value without modification. For overlay networks such as VXLAN,
+# neutron automatically subtracts the overlay protocol overhead from this
+# value. Defaults to 1500, the standard value for Ethernet. (integer value)
+# Deprecated group/name - [ml2]/segment_mtu
+#global_physnet_mtu = 1500
+
+# Number of backlog requests to configure the socket with (integer value)
+#backlog = 4096
+
+# Number of seconds to keep retrying to listen (integer value)
+#retry_until_window = 30
+
+# Enable SSL on the API server (boolean value)
+#use_ssl = false
+
+# Seconds between running periodic tasks (integer value)
+#periodic_interval = 40
+
+# Number of separate API worker processes for service. If not specified, the
+# default is equal to the number of CPUs available for best performance.
+# (integer value)
+#api_workers = <None>
+
+# Number of RPC worker processes for service (integer value)
+#rpc_workers = 1
+
+# Number of RPC worker processes dedicated to state reports queue (integer
+# value)
+#rpc_state_report_workers = 1
+
+# Range of seconds to randomly delay when starting the periodic task scheduler
+# to reduce stampeding. (Disable by setting to 0) (integer value)
+#periodic_fuzzy_delay = 5
+
+#
+# From neutron.agent
+#
+
+# The driver used to manage the virtual interface. (string value)
+#interface_driver = <None>
+
+# Location for Metadata Proxy UNIX domain socket. (string value)
+#metadata_proxy_socket = $state_path/metadata_proxy
+
+# User (uid or name) running metadata proxy after its initialization (if empty:
+# agent effective user). (string value)
+#metadata_proxy_user =
+
+# Group (gid or name) running metadata proxy after its initialization (if
+# empty: agent effective group). (string value)
+#metadata_proxy_group =
+
+# Enable/Disable log watch by metadata proxy. It should be disabled when
+# metadata_proxy_user/group is not allowed to read/write its log file and
+# copytruncate logrotate option must be used if logrotate is enabled on
+# metadata proxy log files. Option default value is deduced from
+# metadata_proxy_user: watch log is enabled if metadata_proxy_user is agent
+# effective user id/name. (boolean value)
+#metadata_proxy_watch_log = <None>
+
+#
+# From neutron.db
+#
+
+# Seconds to regard the agent is down; should be at least twice
+# report_interval, to be sure the agent is down for good. (integer value)
+#agent_down_time = 75
+agent_down_time = 30
+
+# Representing the resource type whose load is being reported by the agent.
+# This can be "networks", "subnets" or "ports". When specified (Default is
+# networks), the server will extract particular load sent as part of its agent
+# configuration object from the agent report state, which is the number of
+# resources being consumed, at every report_interval.dhcp_load_type can be used
+# in combination with network_scheduler_driver =
+# neutron.scheduler.dhcp_agent_scheduler.WeightScheduler When the
+# network_scheduler_driver is WeightScheduler, dhcp_load_type can be configured
+# to represent the choice for the resource being balanced. Example:
+# dhcp_load_type=networks (string value)
+# Allowed values: networks, subnets, ports
+#dhcp_load_type = networks
+
+# Agent starts with admin_state_up=False when enable_new_agents=False. In the
+# case, user's resources will not be scheduled automatically to the agent until
+# admin changes admin_state_up to True. (boolean value)
+#enable_new_agents = true
+
+# Maximum number of routes per router (integer value)
+#max_routes = 30
+
+# Define the default value of enable_snat if not provided in
+# external_gateway_info. (boolean value)
+#enable_snat_by_default = true
+
+# Driver to use for scheduling network to DHCP agent (string value)
+#network_scheduler_driver = neutron.scheduler.dhcp_agent_scheduler.WeightScheduler
+
+# Allow auto scheduling networks to DHCP agent. (boolean value)
+#network_auto_schedule = true
+
+# Automatically remove networks from offline DHCP agents. (boolean value)
+#allow_automatic_dhcp_failover = true
+
+# Number of DHCP agents scheduled to host a tenant network. If this number is
+# greater than 1, the scheduler automatically assigns multiple DHCP agents for
+# a given tenant network, providing high availability for DHCP service.
+# (integer value)
+#dhcp_agents_per_network = 1
+
+# Enable services on an agent with admin_state_up False. If this option is
+# False, when admin_state_up of an agent is turned False, services on it will
+# be disabled. Agents with admin_state_up False are not selected for automatic
+# scheduling regardless of this option. But manual scheduling to such agents is
+# available if this option is True. (boolean value)
+#enable_services_on_agents_with_admin_state_down = false
+
+# The base mac address used for unique DVR instances by Neutron. The first 3
+# octets will remain unchanged. If the 4th octet is not 00, it will also be
+# used. The others will be randomly generated. The 'dvr_base_mac' *must* be
+# different from 'base_mac' to avoid mixing them up with MAC's allocated for
+# tenant ports. A 4 octet example would be dvr_base_mac = fa:16:3f:4f:00:00.
+# The default is 3 octet (string value)
+#dvr_base_mac = fa:16:3f:00:00:00
+
+# System-wide flag to determine the type of router that tenants can create.
+# Only admin can override. (boolean value)
+#router_distributed = false
+
+# Driver to use for scheduling router to a default L3 agent (string value)
+#router_scheduler_driver = neutron.scheduler.l3_agent_scheduler.LeastRoutersScheduler
+
+# Allow auto scheduling of routers to L3 agent. (boolean value)
+#router_auto_schedule = true
+
+# Automatically reschedule routers from offline L3 agents to online L3 agents.
+# (boolean value)
+#allow_automatic_l3agent_failover = false
+
+# Enable HA mode for virtual routers. (boolean value)
+#l3_ha = false
+
+# Maximum number of L3 agents which a HA router will be scheduled on. If it is
+# set to 0 then the router will be scheduled on every agent. (integer value)
+#max_l3_agents_per_router = 3
+
+# Minimum number of L3 agents which a HA router will be scheduled on. If it is
+# set to 0 then the router will be scheduled on every agent. (integer value)
+#min_l3_agents_per_router = 2
+
+# Subnet used for the l3 HA admin network. (string value)
+#l3_ha_net_cidr = 169.254.192.0/18
+
+# The network type to use when creating the HA network for an HA router. By
+# default or if empty, the first 'tenant_network_types' is used. This is
+# helpful when the VRRP traffic should use a specific network which is not the
+# default one. (string value)
+#l3_ha_network_type =
+
+# The physical network name with which the HA network can be created. (string
+# value)
+#l3_ha_network_physical_name =
+
+#
+# From neutron.extensions
+#
+
+# Maximum number of allowed address pairs (integer value)
+#max_allowed_address_pair = 10
+
+#
+# From neutron.qos
+#
+
+# Drivers list to use to send the update notification (list value)
+#notification_drivers = m,e,s,s,a,g,e,_,q,u,e,u,e
+
+#
+# From oslo.log
+#
+
+# If set to true, the logging level will be set to DEBUG instead of the default
+# INFO level. (boolean value)
+#debug = false
+
+# If set to false, the logging level will be set to WARNING instead of the
+# default INFO level. (boolean value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#verbose = true
+verbose = true
+
+# The name of a logging configuration file. This file is appended to any
+# existing logging configuration files. For details about logging configuration
+# files, see the Python logging module documentation. Note that when logging
+# configuration files are used then all logging configuration is set in the
+# configuration file and other logging configuration options are ignored (for
+# example, logging_context_format_string). (string value)
+# Deprecated group/name - [DEFAULT]/log_config
+#log_config_append = <None>
+
+# Defines the format string for %%(asctime)s in log records. Default:
+# %(default)s . This option is ignored if log_config_append is set. (string
+# value)
+#log_date_format = %Y-%m-%d %H:%M:%S
+
+# (Optional) Name of log file to send logging output to. If no default is set,
+# logging will go to stderr as defined by use_stderr. This option is ignored if
+# log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logfile
+#log_file = <None>
+
+# (Optional) The base directory used for relative log_file  paths. This option
+# is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logdir
+#log_dir = <None>
+
+# Uses logging handler designed to watch file system. When log file is moved or
+# removed this handler will open a new log file with specified path
+# instantaneously. It makes sense only if log_file option is specified and
+# Linux platform is used. This option is ignored if log_config_append is set.
+# (boolean value)
+#watch_log_file = false
+
+# Use syslog for logging. Existing syslog format is DEPRECATED and will be
+# changed later to honor RFC5424. This option is ignored if log_config_append
+# is set. (boolean value)
+#use_syslog = false
+
+# Syslog facility to receive log lines. This option is ignored if
+# log_config_append is set. (string value)
+#syslog_log_facility = LOG_USER
+
+# Log output to standard error. This option is ignored if log_config_append is
+# set. (boolean value)
+#use_stderr = true
+
+# Format string to use for log messages with context. (string value)
+#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
+
+# Format string to use for log messages when context is undefined. (string
+# value)
+#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
+
+# Additional data to append to log message when logging level for the message
+# is DEBUG. (string value)
+#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
+
+# Prefix each line of exception output with this format. (string value)
+#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
+
+# Defines the format string for %(user_identity)s that is used in
+# logging_context_format_string. (string value)
+#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
+
+# List of package logging levels in logger=LEVEL pairs. This option is ignored
+# if log_config_append is set. (list value)
+#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
+
+# Enables or disables publication of error events. (boolean value)
+#publish_errors = false
+
+# The format for an instance that is passed with the log message. (string
+# value)
+#instance_format = "[instance: %(uuid)s] "
+
+# The format for an instance UUID that is passed with the log message. (string
+# value)
+#instance_uuid_format = "[instance: %(uuid)s] "
+
+# Enables or disables fatal status of deprecations. (boolean value)
+#fatal_deprecations = false
+
+#
+# From oslo.messaging
+#
+
+# Size of RPC connection pool. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_conn_pool_size
+#rpc_conn_pool_size = 30
+
+# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
+# The "host" option should point or resolve to this address. (string value)
+#rpc_zmq_bind_address = *
+
+# MatchMaker driver. (string value)
+# Allowed values: redis, dummy
+#rpc_zmq_matchmaker = redis
+
+# Type of concurrency used. Either "native" or "eventlet" (string value)
+#rpc_zmq_concurrency = eventlet
+
+# Number of ZeroMQ contexts, defaults to 1. (integer value)
+#rpc_zmq_contexts = 1
+
+# Maximum number of ingress messages to locally buffer per topic. Default is
+# unlimited. (integer value)
+#rpc_zmq_topic_backlog = <None>
+
+# Directory for holding IPC sockets. (string value)
+#rpc_zmq_ipc_dir = /var/run/openstack
+
+# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
+# "host" option, if running Nova. (string value)
+#rpc_zmq_host = localhost
+
+# Seconds to wait before a cast expires (TTL). The default value of -1
+# specifies an infinite linger period. The value of 0 specifies no linger
+# period. Pending messages shall be discarded immediately when the socket is
+# closed. Only supported by impl_zmq. (integer value)
+#rpc_cast_timeout = -1
+rpc_cast_timeout=30
+
+# The default number of seconds that poll should wait. Poll raises timeout
+# exception when timeout expired. (integer value)
+#rpc_poll_timeout = 1
+
+# Expiration timeout in seconds of a name service record about existing target
+# ( < 0 means no timeout). (integer value)
+#zmq_target_expire = 120
+
+# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
+# value)
+#use_pub_sub = true
+
+# Minimal port number for random ports range. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#rpc_zmq_min_port = 49152
+
+# Maximal port number for random ports range. (integer value)
+# Minimum value: 1
+# Maximum value: 65536
+#rpc_zmq_max_port = 65536
+
+# Number of retries to find free port number before fail with ZMQBindError.
+# (integer value)
+#rpc_zmq_bind_port_retries = 100
+
+# Size of executor thread pool. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
+#executor_thread_pool_size = 64
+executor_thread_pool_size = 70
+
+# Seconds to wait for a response from a call. (integer value)
+#rpc_response_timeout = 60
+rpc_response_timeout=60
+
+# A URL representing the messaging driver to use and its full configuration. If
+# not set, we fall back to the rpc_backend option and driver specific
+# configuration. (string value)
+#transport_url = <None>
+
+# The messaging driver to use, defaults to rabbit. Other drivers include amqp
+# and zmq. (string value)
+#rpc_backend = rabbit
+rpc_backend = rabbit
+
+# The default exchange under which topics are scoped. May be overridden by an
+# exchange name specified in the transport_url option. (string value)
+#control_exchange = neutron
+
+#
+# From oslo.service.wsgi
+#
+
+# File name for the paste.deploy config for api service (string value)
+#api_paste_config = api-paste.ini
+
+# A python format string that is used as the template to generate log lines.
+# The following values can beformatted into it: client_ip, date_time,
+# request_line, status_code, body_length, wall_seconds. (string value)
+#wsgi_log_format = %(client_ip)s "%(request_line)s" status: %(status_code)s  len: %(body_length)s time: %(wall_seconds).7f
+
+# Sets the value of TCP_KEEPIDLE in seconds for each server socket. Not
+# supported on OS X. (integer value)
+#tcp_keepidle = 600
+
+# Size of the pool of greenthreads used by wsgi (integer value)
+#wsgi_default_pool_size = 1000
+
+# Maximum line size of message headers to be accepted. max_header_line may need
+# to be increased when using large tokens (typically those generated by the
+# Keystone v3 API with big service catalogs). (integer value)
+#max_header_line = 16384
+
+# If False, closes the client socket connection explicitly. (boolean value)
+#wsgi_keep_alive = true
+
+# Timeout for client connections' socket operations. If an incoming connection
+# is idle for this number of seconds it will be closed. A value of '0' means
+# wait forever. (integer value)
+#client_socket_timeout = 900
+
+[agent]
+
+#
+# From neutron.agent
+#
+
+# Root helper application. Use 'sudo neutron-rootwrap
+# /etc/neutron/rootwrap.conf' to use the real root filter facility. Change to
+# 'sudo' to skip the filtering and just run the command directly. (string
+# value)
+root_helper = sudo /usr/bin/neutron-rootwrap /etc/neutron/rootwrap.conf
+
+# Use the root helper when listing the namespaces on a system. This may not be
+# required depending on the security configuration. If the root helper is not
+# required, set this to False for a performance improvement. (boolean value)
+#use_helper_for_ns_read = true
+
+# Root helper daemon application to use when possible. (string value)
+#root_helper_daemon = <None>
+
+# Seconds between nodes reporting state to server; should be less than
+# agent_down_time, best if it is half or less than agent_down_time. (floating
+# point value)
+#report_interval = 30
+report_interval = 10
+
+# Log agent heartbeats (boolean value)
+#log_agent_heartbeats = false
+
+# Add comments to iptables rules. Set to false to disallow the addition of
+# comments to generated iptables rules that describe each rule's purpose.
+# System must support the iptables comments module for addition of comments.
+# (boolean value)
+#comment_iptables_rules = true
+
+# Action to be executed when a child process dies (string value)
+# Allowed values: respawn, exit
+#check_child_processes_action = respawn
+
+# Interval between checks of child process liveness (seconds), use 0 to disable
+# (integer value)
+#check_child_processes_interval = 60
+
+# Availability zone of this node (string value)
+#availability_zone = nova
+
+
+[cors]
+
+#
+# From oslo.middleware.cors
+#
+
+# Indicate whether this resource may be shared with the domain received in the
+# requests "origin" header. (list value)
+#allowed_origin = <None>
+
+# Indicate that the actual request can include user credentials (boolean value)
+#allow_credentials = true
+
+# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
+# Headers. (list value)
+#expose_headers = X-Auth-Token,X-Subject-Token,X-Service-Token,X-OpenStack-Request-ID,OpenStack-Volume-microversion
+
+# Maximum cache age of CORS preflight requests. (integer value)
+#max_age = 3600
+
+# Indicate which methods can be used during the actual request. (list value)
+#allow_methods = GET,PUT,POST,DELETE,PATCH
+
+# Indicate which header field names may be used during the actual request.
+# (list value)
+#allow_headers = X-Auth-Token,X-Identity-Status,X-Roles,X-Service-Catalog,X-User-Id,X-Tenant-Id,X-OpenStack-Request-ID
+
+
+[cors.subdomain]
+
+#
+# From oslo.middleware.cors
+#
+
+# Indicate whether this resource may be shared with the domain received in the
+# requests "origin" header. (list value)
+#allowed_origin = <None>
+
+# Indicate that the actual request can include user credentials (boolean value)
+#allow_credentials = true
+
+# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
+# Headers. (list value)
+#expose_headers = X-Auth-Token,X-Subject-Token,X-Service-Token,X-OpenStack-Request-ID,OpenStack-Volume-microversion
+
+# Maximum cache age of CORS preflight requests. (integer value)
+#max_age = 3600
+
+# Indicate which methods can be used during the actual request. (list value)
+#allow_methods = GET,PUT,POST,DELETE,PATCH
+
+# Indicate which header field names may be used during the actual request.
+# (list value)
+#allow_headers = X-Auth-Token,X-Identity-Status,X-Roles,X-Service-Catalog,X-User-Id,X-Tenant-Id,X-OpenStack-Request-ID
+
+
+[database]
+
+#
+# From neutron.db
+#
+
+# Database engine for which script will be generated when using offline
+# migration. (string value)
+#engine =
+
+#
+# From oslo.db
+#
+
+# The file name to use with SQLite. (string value)
+# Deprecated group/name - [DEFAULT]/sqlite_db
+#sqlite_db = oslo.sqlite
+
+# If True, SQLite uses synchronous mode. (boolean value)
+# Deprecated group/name - [DEFAULT]/sqlite_synchronous
+#sqlite_synchronous = true
+
+# The back end to use for the database. (string value)
+# Deprecated group/name - [DEFAULT]/db_backend
+#backend = sqlalchemy
+
+# The SQLAlchemy connection string to use to connect to the database. (string
+# value)
+# Deprecated group/name - [DEFAULT]/sql_connection
+# Deprecated group/name - [DATABASE]/sql_connection
+# Deprecated group/name - [sql]/connection
+
+# The SQLAlchemy connection string to use to connect to the slave database.
+# (string value)
+#slave_connection = <None>
+
+# The SQL mode to be used for MySQL sessions. This option, including the
+# default, overrides any server-set SQL mode. To use whatever SQL mode is set
+# by the server configuration, set this to no value. Example: mysql_sql_mode=
+# (string value)
+#mysql_sql_mode = TRADITIONAL
+
+# Timeout before idle SQL connections are reaped. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_idle_timeout
+# Deprecated group/name - [DATABASE]/sql_idle_timeout
+# Deprecated group/name - [sql]/idle_timeout
+#idle_timeout = 3600
+
+# Minimum number of SQL connections to keep open in a pool. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_min_pool_size
+# Deprecated group/name - [DATABASE]/sql_min_pool_size
+#min_pool_size = 1
+
+# Maximum number of SQL connections to keep open in a pool. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_max_pool_size
+# Deprecated group/name - [DATABASE]/sql_max_pool_size
+#max_pool_size = <None>
+
+# Maximum number of database connection retries during startup. Set to -1 to
+# specify an infinite retry count. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_max_retries
+# Deprecated group/name - [DATABASE]/sql_max_retries
+#max_retries = 10
+
+# Interval between retries of opening a SQL connection. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_retry_interval
+# Deprecated group/name - [DATABASE]/reconnect_interval
+#retry_interval = 10
+
+# If set, use this value for max_overflow with SQLAlchemy. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_max_overflow
+# Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
+#max_overflow = 50
+
+# Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
+# value)
+# Deprecated group/name - [DEFAULT]/sql_connection_debug
+#connection_debug = 0
+
+# Add Python stack traces to SQL as comment strings. (boolean value)
+# Deprecated group/name - [DEFAULT]/sql_connection_trace
+#connection_trace = false
+
+# If set, use this value for pool_timeout with SQLAlchemy. (integer value)
+# Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
+#pool_timeout = <None>
+
+# Enable the experimental use of database reconnect on connection lost.
+# (boolean value)
+#use_db_reconnect = false
+
+# Seconds between retries of a database transaction. (integer value)
+#db_retry_interval = 1
+
+# If True, increases the interval between retries of a database operation up to
+# db_max_retry_interval. (boolean value)
+#db_inc_retry_interval = true
+
+# If db_inc_retry_interval is set, the maximum seconds between retries of a
+# database operation. (integer value)
+#db_max_retry_interval = 10
+
+# Maximum retries in case of connection error or deadlock error before error is
+# raised. Set to -1 to specify an infinite retry count. (integer value)
+#db_max_retries = 20
+
+
+[keystone_authtoken]
+
+#
+# From keystonemiddleware.auth_token
+#
+
+# Complete public Identity API endpoint. (string value)
+#auth_uri = <None>
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+# Do not handle authorization requests within the middleware, but delegate the
+# authorization decision to downstream WSGI components. (boolean value)
+#delay_auth_decision = false
+
+# Request timeout value for communicating with Identity API server. (integer
+# value)
+#http_connect_timeout = <None>
+
+# How many times are we trying to reconnect when communicating with Identity
+# API Server. (integer value)
+#http_request_max_retries = 3
+
+# Env key for the swift cache. (string value)
+#cache = <None>
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# The region in which the identity server can be found. (string value)
+#region_name = <None>
+
+# Directory used to cache files related to PKI tokens. (string value)
+#signing_dir = <None>
+
+# Optionally specify a list of memcached server(s) to use for caching. If left
+# undefined, tokens will instead be cached in-process. (list value)
+# Deprecated group/name - [DEFAULT]/memcache_servers
+#memcached_servers = <None>
+
+# In order to prevent excessive effort spent validating tokens, the middleware
+# caches previously-seen tokens for a configurable duration (in seconds). Set
+# to -1 to disable caching completely. (integer value)
+#token_cache_time = 300
+
+# Determines the frequency at which the list of revoked tokens is retrieved
+# from the Identity service (in seconds). A high number of revocation events
+# combined with a low cache duration may significantly reduce performance.
+# (integer value)
+#revocation_cache_time = 10
+
+# (Optional) If defined, indicate whether token data should be authenticated or
+# authenticated and encrypted. If MAC, token data is authenticated (with HMAC)
+# in the cache. If ENCRYPT, token data is encrypted and authenticated in the
+# cache. If the value is not one of these options or empty, auth_token will
+# raise an exception on initialization. (string value)
+# Allowed values: None, MAC, ENCRYPT
+#memcache_security_strategy = None
+
+# (Optional, mandatory if memcache_security_strategy is defined) This string is
+# used for key derivation. (string value)
+#memcache_secret_key = <None>
+
+# (Optional) Number of seconds memcached server is considered dead before it is
+# tried again. (integer value)
+#memcache_pool_dead_retry = 300
+
+# (Optional) Maximum total number of open connections to every memcached
+# server. (integer value)
+#memcache_pool_maxsize = 10
+
+# (Optional) Socket timeout in seconds for communicating with a memcached
+# server. (integer value)
+#memcache_pool_socket_timeout = 3
+
+# (Optional) Number of seconds a connection to memcached is held unused in the
+# pool before it is closed. (integer value)
+#memcache_pool_unused_timeout = 60
+
+# (Optional) Number of seconds that an operation will wait to get a memcached
+# client connection from the pool. (integer value)
+#memcache_pool_conn_get_timeout = 10
+
+# (Optional) Use the advanced (eventlet safe) memcached client pool. The
+# advanced pool will only work under python 2.x. (boolean value)
+#memcache_use_advanced_pool = false
+
+# (Optional) Indicate whether to set the X-Service-Catalog header. If False,
+# middleware will not ask for service catalog on token validation and will not
+# set the X-Service-Catalog header. (boolean value)
+#include_service_catalog = true
+
+# Used to control the use and type of token binding. Can be set to: "disabled"
+# to not check token binding. "permissive" (default) to validate binding
+# information if the bind type is of a form known to the server and ignore it
+# if not. "strict" like "permissive" but if the bind type is unknown the token
+# will be rejected. "required" any form of token binding is needed to be
+# allowed. Finally the name of a binding method that must be present in tokens.
+# (string value)
+#enforce_token_bind = permissive
+
+# If true, the revocation list will be checked for cached tokens. This requires
+# that PKI tokens are configured on the identity server. (boolean value)
+#check_revocations_for_cached = false
+
+# Hash algorithms to use for hashing PKI tokens. This may be a single algorithm
+# or multiple. The algorithms are those supported by Python standard
+# hashlib.new(). The hashes will be tried in the order given, so put the
+# preferred one first for performance. The result of the first hash will be
+# stored in the cache. This will typically be set to multiple values only while
+# migrating from a less secure algorithm to a more secure one. Once all the old
+# tokens are expired this option should be set to a single value for better
+# performance. (list value)
+#hash_algorithms = md5
+
+# Prefix to prepend at the beginning of the path. Deprecated, use identity_uri.
+# (string value)
+#auth_admin_prefix =
+
+# Host providing the admin Identity API endpoint. Deprecated, use identity_uri.
+# (string value)
+#auth_host = 127.0.0.1
+
+# Port of the admin Identity API endpoint. Deprecated, use identity_uri.
+# (integer value)
+#auth_port = 35357
+
+# Protocol of the admin Identity API endpoint. Deprecated, use identity_uri.
+# (string value)
+# Allowed values: http, https
+#auth_protocol = https
+
+# Complete admin Identity API endpoint. This should specify the unversioned
+# root endpoint e.g. https://localhost:35357/ (string value)
+#identity_uri = <None>
+
+# This option is deprecated and may be removed in a future release. Single
+# shared secret with the Keystone configuration used for bootstrapping a
+# Keystone installation, or otherwise bypassing the normal authentication
+# process. This option should not be used, use `admin_user` and
+# `admin_password` instead. (string value)
+#admin_token = <None>
+
+# Service username. (string value)
+#admin_user = <None>
+
+# Service user password. (string value)
+#admin_password = <None>
+
+# Service tenant name. (string value)
+#admin_tenant_name = admin
+
+# Authentication type to load (unknown value)
+# Deprecated group/name - [DEFAULT]/auth_plugin
+#auth_type = <None>
+
+# Config Section from which to load plugin specific options (unknown value)
+#auth_section = <None>
+
+
+[matchmaker_redis]
+
+#
+# From oslo.messaging
+#
+
+# Host to locate redis. (string value)
+#host = 127.0.0.1
+
+# Use this port to connect to redis host. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#port = 6379
+
+# Password for Redis server (optional). (string value)
+#password =
+
+# List of Redis Sentinel hosts (fault tolerance mode) e.g.
+# [host:port, host1:port ... ] (list value)
+#sentinel_hosts =
+
+# Redis replica set name. (string value)
+#sentinel_group_name = oslo-messaging-zeromq
+
+# Time in ms to wait between connection attempts. (integer value)
+#wait_timeout = 500
+
+# Time in ms to wait before the transaction is killed. (integer value)
+#check_timeout = 20000
+
+# Timeout in ms on blocking socket operations (integer value)
+#socket_timeout = 1000
+
+
+[nova]
+
+#
+# From neutron
+#
+
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Allowed values: public, admin, internal
+#endpoint_type = public
+
+#
+# From nova.auth
+#
+
+# Authentication URL (unknown value)
+#auth_url = <None>
+
+# Authentication type to load (unknown value)
+# Deprecated group/name - [DEFAULT]/auth_plugin
+#auth_type = <None>
+
+# PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# (string value)
+#cafile = <None>
+
+# PEM encoded client certificate cert file (string value)
+#certfile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (unknown
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used
+# for both the user and project domain in v3 and ignored in v2 authentication.
+# (unknown value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (unknown value)
+#domain_id = <None>
+
+# Domain name to scope to (unknown value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# PEM encoded client certificate key file (string value)
+#keyfile = <None>
+
+# User's password (unknown value)
+#password = <None>
+
+# Domain ID containing project (unknown value)
+#project_domain_id = <None>
+
+# Domain name containing project (unknown value)
+#project_domain_name = <None>
+
+# Project ID to scope to (unknown value)
+# Deprecated group/name - [DEFAULT]/tenant-id
+#project_id = <None>
+
+# Project name to scope to (unknown value)
+# Deprecated group/name - [DEFAULT]/tenant-name
+#project_name = <None>
+
+# Tenant ID (unknown value)
+#tenant_id = <None>
+
+# Tenant Name (unknown value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (unknown value)
+#trust_id = <None>
+
+# User's domain id (unknown value)
+#user_domain_id = <None>
+
+# User's domain name (unknown value)
+#user_domain_name = <None>
+
+# User id (unknown value)
+#user_id = <None>
+
+# Username (unknown value)
+# Deprecated group/name - [DEFAULT]/username
+#username = <None>
+
+
+[oslo_concurrency]
+
+#
+# From oslo.concurrency
+#
+
+# Enables or disables inter-process locks. (boolean value)
+# Deprecated group/name - [DEFAULT]/disable_process_locking
+#disable_process_locking = false
+
+# Directory to use for lock files.  For security, the specified directory
+# should only be writable by the user running the processes that need locking.
+# Defaults to environment variable OSLO_LOCK_PATH. If OSLO_LOCK_PATH is not set
+# in the environment, use the Python tempfile.gettempdir function to find a
+# suitable location. If external locks are used, a lock path must be set.
+# (string value)
+# Deprecated group/name - [DEFAULT]/lock_path
+#lock_path = /tmp
+lock_path = $state_path/lock
+
+[oslo_messaging_amqp]
+
+#
+# From oslo.messaging
+#
+
+# address prefix used when sending to a specific server (string value)
+# Deprecated group/name - [amqp1]/server_request_prefix
+#server_request_prefix = exclusive
+
+# address prefix used when broadcasting to all servers (string value)
+# Deprecated group/name - [amqp1]/broadcast_prefix
+#broadcast_prefix = broadcast
+
+# address prefix when sending to any server in group (string value)
+# Deprecated group/name - [amqp1]/group_request_prefix
+#group_request_prefix = unicast
+
+# Name for the AMQP container (string value)
+# Deprecated group/name - [amqp1]/container_name
+#container_name = <None>
+
+# Timeout for inactive connections (in seconds) (integer value)
+# Deprecated group/name - [amqp1]/idle_timeout
+#idle_timeout = 0
+
+# Debug: dump AMQP frames to stdout (boolean value)
+# Deprecated group/name - [amqp1]/trace
+#trace = false
+
+# CA certificate PEM file to verify server certificate (string value)
+# Deprecated group/name - [amqp1]/ssl_ca_file
+#ssl_ca_file =
+
+# Identifying certificate PEM file to present to clients (string value)
+# Deprecated group/name - [amqp1]/ssl_cert_file
+#ssl_cert_file =
+
+# Private key PEM file used to sign cert_file certificate (string value)
+# Deprecated group/name - [amqp1]/ssl_key_file
+#ssl_key_file =
+
+# Password for decrypting ssl_key_file (if encrypted) (string value)
+# Deprecated group/name - [amqp1]/ssl_key_password
+#ssl_key_password = <None>
+
+# Accept clients using either SSL or plain TCP (boolean value)
+# Deprecated group/name - [amqp1]/allow_insecure_clients
+#allow_insecure_clients = false
+
+# Space separated list of acceptable SASL mechanisms (string value)
+# Deprecated group/name - [amqp1]/sasl_mechanisms
+#sasl_mechanisms =
+
+# Path to directory that contains the SASL configuration (string value)
+# Deprecated group/name - [amqp1]/sasl_config_dir
+#sasl_config_dir =
+
+# Name of configuration file (without .conf suffix) (string value)
+# Deprecated group/name - [amqp1]/sasl_config_name
+#sasl_config_name =
+
+# User name for message broker authentication (string value)
+# Deprecated group/name - [amqp1]/username
+#username =
+
+# Password for message broker authentication (string value)
+# Deprecated group/name - [amqp1]/password
+#password =
+
+
+[oslo_messaging_notifications]
+
+#
+# From oslo.messaging
+#
+
+# The Drivers(s) to handle sending notifications. Possible values are
+# messaging, messagingv2, routing, log, test, noop (multi valued)
+# Deprecated group/name - [DEFAULT]/notification_driver
+#driver =
+
+# A URL representing the messaging driver to use for notifications. If not set,
+# we fall back to the same configuration used for RPC. (string value)
+# Deprecated group/name - [DEFAULT]/notification_transport_url
+#transport_url = <None>
+
+# AMQP topic used for OpenStack notifications. (list value)
+# Deprecated group/name - [rpc_notifier2]/topics
+# Deprecated group/name - [DEFAULT]/notification_topics
+#topics = notifications
+
+
+[oslo_messaging_rabbit]
+
+#
+# From oslo.messaging
+#
+
+# Use durable queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/amqp_durable_queues
+# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
+#amqp_durable_queues = false
+
+# Auto-delete queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/amqp_auto_delete
+#amqp_auto_delete = false
+
+# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
+# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
+# distributions. (string value)
+# Deprecated group/name - [DEFAULT]/kombu_ssl_version
+#kombu_ssl_version =
+
+# SSL key file (valid only if SSL enabled). (string value)
+# Deprecated group/name - [DEFAULT]/kombu_ssl_keyfile
+#kombu_ssl_keyfile =
+
+# SSL cert file (valid only if SSL enabled). (string value)
+# Deprecated group/name - [DEFAULT]/kombu_ssl_certfile
+#kombu_ssl_certfile =
+
+# SSL certification authority file (valid only if SSL enabled). (string value)
+# Deprecated group/name - [DEFAULT]/kombu_ssl_ca_certs
+#kombu_ssl_ca_certs =
+
+# How long to wait before reconnecting in response to an AMQP consumer cancel
+# notification. (floating point value)
+# Deprecated group/name - [DEFAULT]/kombu_reconnect_delay
+#kombu_reconnect_delay = 1.0
+
+# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not
+# be used. This option may notbe available in future versions. (string value)
+#kombu_compression = <None>
+
+# How long to wait a missing client beforce abandoning to send it its replies.
+# This value should not be longer than rpc_response_timeout. (integer value)
+# Deprecated group/name - [DEFAULT]/kombu_reconnect_timeout
+#kombu_missing_consumer_retry_timeout = 60
+
+# Determines how the next RabbitMQ node is chosen in case the one we are
+# currently connected to becomes unavailable. Takes effect only if more than
+# one RabbitMQ node is provided in config. (string value)
+# Allowed values: round-robin, shuffle
+#kombu_failover_strategy = round-robin
+
+# The RabbitMQ broker address where a single node is used. (string value)
+# Deprecated group/name - [DEFAULT]/rabbit_host
+#rabbit_host = localhost
+
+# The RabbitMQ broker port where a single node is used. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+# Deprecated group/name - [DEFAULT]/rabbit_port
+#rabbit_port = 5672
+
+# RabbitMQ HA cluster host:port pairs. (list value)
+# Deprecated group/name - [DEFAULT]/rabbit_hosts
+#rabbit_hosts = $rabbit_host:$rabbit_port
+#
+{%- if neutron.message_queue.members is defined %}
+rabbit_hosts = {% for member in neutron.message_queue.members -%}
+                   {{ member.host }}:{{ member.get('port', 5672) }}
+                   {%- if not loop.last -%},{%- endif -%}
+               {%- endfor -%}
+{%- else %}
+rabbit_host = {{ neutron.message_queue.host }}
+rabbit_port = {{ neutron.message_queue.port }}
+{%- endif %}
+
+rabbit_userid = {{ neutron.message_queue.user }}
+rabbit_password = {{ neutron.message_queue.password }}
+rabbit_virtual_host = {{ neutron.message_queue.virtual_host }}
+# Connect over SSL for RabbitMQ. (boolean value)
+# Deprecated group/name - [DEFAULT]/rabbit_use_ssl
+#rabbit_use_ssl = false
+
+# The RabbitMQ userid. (string value)
+# Deprecated group/name - [DEFAULT]/rabbit_userid
+#rabbit_userid = guest
+
+# The RabbitMQ password. (string value)
+# Deprecated group/name - [DEFAULT]/rabbit_password
+#rabbit_password = guest
+
+# The RabbitMQ login method. (string value)
+# Deprecated group/name - [DEFAULT]/rabbit_login_method
+#rabbit_login_method = AMQPLAIN
+
+# The RabbitMQ virtual host. (string value)
+# Deprecated group/name - [DEFAULT]/rabbit_virtual_host
+#rabbit_virtual_host = /
+
+# How frequently to retry connecting with RabbitMQ. (integer value)
+#rabbit_retry_interval = 1
+rabbit_retry_interval = 1
+
+# How long to backoff for between retries when connecting to RabbitMQ. (integer
+# value)
+# Deprecated group/name - [DEFAULT]/rabbit_retry_backoff
+#rabbit_retry_backoff = 2
+rabbit_retry_backoff = 2
+
+# Maximum interval of RabbitMQ connection retries. Default is 30 seconds.
+# (integer value)
+#rabbit_interval_max = 30
+
+# Maximum number of RabbitMQ connection retries. Default is 0 (infinite retry
+# count). (integer value)
+# Deprecated group/name - [DEFAULT]/rabbit_max_retries
+#rabbit_max_retries = 0
+rabbit_max_retries = 0
+
+# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this
+# option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring
+# is no longer controlled by the x-ha-policy argument when declaring a queue.
+# If you just want to make sure that all queues (except  those with auto-
+# generated names) are mirrored across all nodes, run: "rabbitmqctl set_policy
+# HA '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value)
+# Deprecated group/name - [DEFAULT]/rabbit_ha_queues
+#rabbit_ha_queues = false
+
+# Positive integer representing duration in seconds for queue TTL (x-expires).
+# Queues which are unused for the duration of the TTL are automatically
+# deleted. The parameter affects only reply and fanout queues. (integer value)
+# Minimum value: 1
+#rabbit_transient_queues_ttl = 1800
+
+# Specifies the number of messages to prefetch. Setting to zero allows
+# unlimited messages. (integer value)
+#rabbit_qos_prefetch_count = 0
+
+# Number of seconds after which the Rabbit broker is considered down if
+# heartbeat's keep-alive fails (0 disable the heartbeat). EXPERIMENTAL (integer
+# value)
+#heartbeat_timeout_threshold = 60
+heartbeat_timeout_threshold = 0
+
+# How often times during the heartbeat_timeout_threshold we check the
+# heartbeat. (integer value)
+#heartbeat_rate = 2
+heartbeat_rate = 2
+
+# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake (boolean value)
+# Deprecated group/name - [DEFAULT]/fake_rabbit
+#fake_rabbit = false
+
+# Maximum number of channels to allow (integer value)
+#channel_max = <None>
+
+# The maximum byte size for an AMQP frame (integer value)
+#frame_max = <None>
+
+# How often to send heartbeats for consumer's connections (integer value)
+#heartbeat_interval = 1
+
+# Enable SSL (boolean value)
+#ssl = <None>
+
+# Arguments passed to ssl.wrap_socket (dict value)
+#ssl_options = <None>
+
+# Set socket timeout in seconds for connection's socket (floating point value)
+#socket_timeout = 0.25
+
+# Set TCP_USER_TIMEOUT in seconds for connection's socket (floating point
+# value)
+#tcp_user_timeout = 0.25
+
+# Set delay for reconnection to some host which has connection error (floating
+# point value)
+#host_connection_reconnect_delay = 0.25
+
+# Maximum number of connections to keep queued. (integer value)
+#pool_max_size = 10
+
+# Maximum number of connections to create above `pool_max_size`. (integer
+# value)
+#pool_max_overflow = 0
+
+# Default number of seconds to wait for a connections to available (integer
+# value)
+#pool_timeout = 30
+
+# Lifetime of a connection (since creation) in seconds or None for no
+# recycling. Expired connections are closed on acquire. (integer value)
+#pool_recycle = 600
+
+# Threshold at which inactive (since release) connections are considered stale
+# in seconds or None for no staleness. Stale connections are closed on acquire.
+# (integer value)
+#pool_stale = 60
+
+# Persist notification messages. (boolean value)
+#notification_persistence = false
+
+# Exchange name for for sending notifications (string value)
+#default_notification_exchange = ${control_exchange}_notification
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# notification listener. (integer value)
+#notification_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during sending
+# notification, -1 means infinite retry. (integer value)
+#default_notification_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during sending
+# notification message (floating point value)
+#notification_retry_delay = 0.25
+
+# Time to live for rpc queues without consumers in seconds. (integer value)
+#rpc_queue_expiration = 60
+
+# Exchange name for sending RPC messages (string value)
+#default_rpc_exchange = ${control_exchange}_rpc
+
+# Exchange name for receiving RPC replies (string value)
+#rpc_reply_exchange = ${control_exchange}_rpc_reply
+
+# Max number of not acknowledged message which RabbitMQ can send to rpc
+# listener. (integer value)
+#rpc_listener_prefetch_count = 100
+
+# Max number of not acknowledged message which RabbitMQ can send to rpc reply
+# listener. (integer value)
+#rpc_reply_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during sending
+# reply. -1 means infinite retry during rpc_timeout (integer value)
+#rpc_reply_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during sending
+# reply. (floating point value)
+#rpc_reply_retry_delay = 0.25
+
+# Reconnecting retry count in case of connectivity problem during sending RPC
+# message, -1 means infinite retry. If actual retry attempts in not 0 the rpc
+# request could be processed more then one time (integer value)
+#default_rpc_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during sending RPC
+# message (floating point value)
+#rpc_retry_delay = 0.25
+
+
+[oslo_policy]
+
+#
+# From oslo.policy
+#
+
+# The JSON file that defines policies. (string value)
+# Deprecated group/name - [DEFAULT]/policy_file
+#policy_file = policy.json
+
+# Default rule. Enforced when a requested rule is not found. (string value)
+# Deprecated group/name - [DEFAULT]/policy_default_rule
+#policy_default_rule = default
+
+# Directories where policy configuration files are stored. They can be relative
+# to any directory in the search path defined by the config_dir option, or
+# absolute paths. The file defined by policy_file must exist for these
+# directories to be searched.  Missing or empty directories are ignored. (multi
+# valued)
+# Deprecated group/name - [DEFAULT]/policy_dirs
+#policy_dirs = policy.d
+
+
+[quotas]
+
+#
+# From neutron
+#
+
+# Resource name(s) that are supported in quota features. This option is now
+# deprecated for removal. (list value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#quota_items = network,subnet,port
+
+# Default number of resource allowed per tenant. A negative value means
+# unlimited. (integer value)
+#default_quota = -1
+
+# Number of networks allowed per tenant. A negative value means unlimited.
+# (integer value)
+#quota_network = 10
+
+# Number of subnets allowed per tenant, A negative value means unlimited.
+# (integer value)
+#quota_subnet = 10
+
+# Number of ports allowed per tenant. A negative value means unlimited.
+# (integer value)
+#quota_port = 50
+
+# Default driver to use for quota checks (string value)
+#quota_driver = neutron.db.quota.driver.DbQuotaDriver
+
+# Keep in track in the database of current resourcequota usage. Plugins which
+# do not leverage the neutron database should set this flag to False (boolean
+# value)
+#track_quota_usage = true
+
+#
+# From neutron.extensions
+#
+
+# Number of routers allowed per tenant. A negative value means unlimited.
+# (integer value)
+#quota_router = 10
+
+# Number of floating IPs allowed per tenant. A negative value means unlimited.
+# (integer value)
+#quota_floatingip = 50
+
+# Number of security groups allowed per tenant. A negative value means
+# unlimited. (integer value)
+#quota_security_group = 10
+
+# Number of security rules allowed per tenant. A negative value means
+# unlimited. (integer value)
+#quota_security_group_rule = 100
+
+
+[ssl]
+
+#
+# From oslo.service.sslutils
+#
+
+# CA certificate file to use to verify connecting clients. (string value)
+# Deprecated group/name - [DEFAULT]/ssl_ca_file
+#ca_file = <None>
+
+# Certificate file to use when starting the server securely. (string value)
+# Deprecated group/name - [DEFAULT]/ssl_cert_file
+#cert_file = <None>
+
+# Private key file to use when starting the server securely. (string value)
+# Deprecated group/name - [DEFAULT]/ssl_key_file
+#key_file = <None>
+
+# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
+# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
+# distributions. (string value)
+#version = <None>
+
+# Sets the list of available ciphers. value should be a string in the OpenSSL
+# cipher list format. (string value)
+#ciphers = <None>
\ No newline at end of file
diff --git a/neutron/files/mitaka/neutron-server.conf.Debian b/neutron/files/mitaka/neutron-server.conf.Debian
index 78406d4..b587cba 100644
--- a/neutron/files/mitaka/neutron-server.conf.Debian
+++ b/neutron/files/mitaka/neutron-server.conf.Debian
@@ -25,21 +25,30 @@
 # extensions:/path/to/more/exts:/even/more/exts. The __path__ of
 # neutron.extensions is appended to this, so if your extensions are in there
 # you don't need to specify them here. (string value)
+
+{% if server.backend.engine == "contrail" %}
+
 # TEMPORARY - until neutron v2 contrail package would be supported
 #api_extensions_path = extensions:/usr/lib/python2.7/dist-packages/neutron_plugin_contrail/extensions:/usr/lib/python2.7/dist-packages/neutron_lbaas/extensions
 api_extensions_path = extensions:/usr/lib/python2.7/dist-packages/neutron_plugin_contrail/extensions
+# The core plugin Neutron will use (string value)
+core_plugin = neutron_plugin_contrail.plugins.opencontrail.contrail_plugin.NeutronPluginContrailCoreV2
+
+# TEMPORARY - until neutron v2 contrail package would be supported
+#service_plugins = neutron_plugin_contrail.plugins.opencontrail.loadbalancer.v2.plugin.LoadBalancerPluginV2
+{% elif server.backend.engine == "ml2" %}
+
+core_plugin = neutron.plugins.ml2.plugin.Ml2Plugin
+
+service_plugins =neutron.services.l3_router.l3_router_plugin.L3RouterPlugin,neutron.services.metering.metering_plugin.MeteringPlugin
+
+{% endif %}
 
 # The type of authentication to use (string value)
 #auth_strategy = keystone
 auth_strategy = keystone
 
-# The core plugin Neutron will use (string value)
-core_plugin = neutron_plugin_contrail.plugins.opencontrail.contrail_plugin.NeutronPluginContrailCoreV2
-
-
 # The service plugins Neutron will use (list value)
-# TEMPORARY - until neutron v2 contrail package would be supported
-#service_plugins = neutron_plugin_contrail.plugins.opencontrail.loadbalancer.v2.plugin.LoadBalancerPluginV2
 # The base MAC address Neutron will use for VIFs. The first 3 octets will
 # remain unchanged. If the 4th octet is not 00, it will also be used. The
 # others will be randomly generated. (string value)
@@ -47,6 +56,7 @@
 
 # How many times Neutron will retry MAC generation (integer value)
 #mac_generation_retries = 16
+mac_generation_retries = 32
 
 # Allow the usage of the bulk API (boolean value)
 #allow_bulk = true
@@ -113,6 +123,7 @@
 # lease times. (integer value)
 # Deprecated group/name - [DEFAULT]/dhcp_lease_time
 #dhcp_lease_duration = 86400
+dhcp_lease_duration = 600
 
 # Domain to use for building the hostnames (string value)
 #dns_domain = openstacklocal
@@ -159,6 +170,7 @@
 # If True, advertise network MTU values if core plugin calculates them. MTU is
 # advertised to running instances via DHCP and RA MTU options. (boolean value)
 #advertise_mtu = true
+advertise_mtu = True
 
 # Neutron IPAM (IP address management) driver to use. If ipam_driver is not set
 # (default behavior), no IPAM driver is used. In order to use the reference
@@ -181,6 +193,7 @@
 # value. Defaults to 1500, the standard value for Ethernet. (integer value)
 # Deprecated group/name - [ml2]/segment_mtu
 #global_physnet_mtu = 1500
+global_physnet_mtu = {{ server.get('global_physnet_mtu', '1500') }}
 
 # Number of backlog requests to configure the socket with (integer value)
 #backlog = 4096
@@ -243,6 +256,7 @@
 # Seconds to regard the agent is down; should be at least twice
 # report_interval, to be sure the agent is down for good. (integer value)
 #agent_down_time = 75
+agent_down_time = 30
 
 # Representing the resource type whose load is being reported by the agent.
 # This can be "networks", "subnets" or "ports". When specified (Default is
@@ -283,6 +297,7 @@
 # a given tenant network, providing high availability for DHCP service.
 # (integer value)
 #dhcp_agents_per_network = 1
+dhcp_agents_per_network = 2
 
 # Enable services on an agent with admin_state_up False. If this option is
 # False, when admin_state_up of an agent is turned False, services on it will
@@ -302,9 +317,11 @@
 # System-wide flag to determine the type of router that tenants can create.
 # Only admin can override. (boolean value)
 #router_distributed = false
+router_distributed = {{ server.get('dvr', 'False') }}
 
 # Driver to use for scheduling router to a default L3 agent (string value)
 #router_scheduler_driver = neutron.scheduler.l3_agent_scheduler.LeastRoutersScheduler
+router_scheduler_driver = neutron.scheduler.l3_agent_scheduler.ChanceScheduler
 
 # Allow auto scheduling of routers to L3 agent. (boolean value)
 #router_auto_schedule = true
@@ -315,6 +332,7 @@
 
 # Enable HA mode for virtual routers. (boolean value)
 #l3_ha = false
+l3_ha = {{ server.get('l3_ha', 'False') }}
 
 # Maximum number of L3 agents which a HA router will be scheduled on. If it is
 # set to 0 then the router will be scheduled on every agent. (integer value)
@@ -568,6 +586,7 @@
 # wait forever. (integer value)
 #client_socket_timeout = 900
 
+nova_url = http://{{ server.compute.host }}:8774/v2
 
 [agent]
 
@@ -593,6 +612,7 @@
 # agent_down_time, best if it is half or less than agent_down_time. (floating
 # point value)
 #report_interval = 30
+report_interval = 10
 
 # Log agent heartbeats (boolean value)
 #log_agent_heartbeats = false
@@ -702,8 +722,11 @@
 # Deprecated group/name - [DEFAULT]/sql_connection
 # Deprecated group/name - [DATABASE]/sql_connection
 # Deprecated group/name - [sql]/connection
+{% if server.backend.engine == "ml2" %}
+connection = {{ server.database.engine }}+pymysql://{{ server.database.user }}:{{ server.database.password }}@{{ server.database.host }}/{{ server.database.name }}
+{% else %}
 connection = sqlite:////var/lib/neutron/neutron.sqlite
-
+{% endif %}
 # The SQLAlchemy connection string to use to connect to the slave database.
 # (string value)
 #slave_connection = <None>
@@ -719,6 +742,7 @@
 # Deprecated group/name - [DATABASE]/sql_idle_timeout
 # Deprecated group/name - [sql]/idle_timeout
 #idle_timeout = 3600
+idle_timeout = 3600
 
 # Minimum number of SQL connections to keep open in a pool. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_min_pool_size
@@ -729,22 +753,26 @@
 # Deprecated group/name - [DEFAULT]/sql_max_pool_size
 # Deprecated group/name - [DATABASE]/sql_max_pool_size
 #max_pool_size = <None>
+max_pool_size = 20
 
 # Maximum number of database connection retries during startup. Set to -1 to
 # specify an infinite retry count. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_retries
 # Deprecated group/name - [DATABASE]/sql_max_retries
 #max_retries = 10
+max_retries = -1
 
 # Interval between retries of opening a SQL connection. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_retry_interval
 # Deprecated group/name - [DATABASE]/reconnect_interval
 #retry_interval = 10
+retry_interval = 2
 
 # If set, use this value for max_overflow with SQLAlchemy. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_overflow
 # Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
 #max_overflow = 50
+max_overflow = 20
 
 # Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
 # value)
@@ -780,16 +808,18 @@
 
 
 [keystone_authtoken]
+{% if server.backend.engine == "contrail" %}
+admin_token = {{ server.backend.token }}
+admin_user={{ server.backend.user }}
+admin_password={{ server.backend.password }}
+admin_tenant_name={{ server.backend.tenant }}
+{%- endif %}
 auth_region={{ server.identity.region }}
 auth_protocol=http
 revocation_cache_time = 10
 auth_type = password
 auth_host = {{ server.identity.host }}
 auth_port = 35357
-admin_token = {{ server.backend.token }}
-admin_user={{ server.backend.user }}
-admin_password={{ server.backend.password }}
-admin_tenant_name={{ server.backend.tenant }}
 user_domain_id = {{ server.identity.get('domain', 'default') }}
 project_domain_id = {{ server.identity.get('domain', 'default') }}
 project_name = {{ server.identity.tenant }}
@@ -1368,10 +1398,12 @@
 # heartbeat's keep-alive fails (0 disable the heartbeat). EXPERIMENTAL (integer
 # value)
 #heartbeat_timeout_threshold = 60
+heartbeat_timeout_threshold = 0
 
 # How often times during the heartbeat_timeout_threshold we check the
 # heartbeat. (integer value)
 #heartbeat_rate = 2
+heartbeat_rate = 2
 
 # Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake (boolean value)
 # Deprecated group/name - [DEFAULT]/fake_rabbit
@@ -1529,7 +1561,9 @@
 
 # Default driver to use for quota checks (string value)
 #quota_driver = neutron.db.quota.driver.DbQuotaDriver
+{% if server.backend.engine == "contrail" %}
 quota_driver = neutron_plugin_contrail.plugins.opencontrail.quota.driver.QuotaDriver
+{% endif %}
 
 # Keep in track in the database of current resourcequota usage. Plugins which
 # do not leverage the neutron database should set this flag to False (boolean
@@ -1584,8 +1618,7 @@
 # cipher list format. (string value)
 #ciphers = <None>
 [service_providers]
-service_provider = LOADBALANCER:Opencontrail:neutron_plugin_contrail.plugins.opencontrail.loadbalancer.driver.OpencontrailLoadbalancerDriver:default
-
 {% if server.backend.engine == "contrail" %}
+service_provider = LOADBALANCER:Opencontrail:neutron_plugin_contrail.plugins.opencontrail.loadbalancer.driver.OpencontrailLoadbalancerDriver:default
 {% include "neutron/files/"+server.version+"/ContrailPlugin.ini" %}
 {% endif %}
diff --git a/neutron/files/mitaka/openvswitch_agent.ini b/neutron/files/mitaka/openvswitch_agent.ini
new file mode 100644
index 0000000..d22dda7
--- /dev/null
+++ b/neutron/files/mitaka/openvswitch_agent.ini
@@ -0,0 +1,250 @@
+{%- if pillar.neutron.gateway is defined %}
+{%- from "neutron/map.jinja" import gateway as neutron with context %}
+{%- else %}
+{%- from "neutron/map.jinja" import compute as neutron with context %}
+{%- endif %}
+
+[DEFAULT]
+
+#
+# From oslo.log
+#
+
+# If set to true, the logging level will be set to DEBUG instead of the default INFO level. (boolean value)
+#debug = false
+
+# If set to false, the logging level will be set to WARNING instead of the default INFO level. (boolean value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#verbose = true
+
+# The name of a logging configuration file. This file is appended to any existing logging configuration files. For details about logging
+# configuration files, see the Python logging module documentation. Note that when logging configuration files are used then all logging
+# configuration is set in the configuration file and other logging configuration options are ignored (for example,
+# logging_context_format_string). (string value)
+# Deprecated group/name - [DEFAULT]/log_config
+#log_config_append = <None>
+
+# Defines the format string for %%(asctime)s in log records. Default: %(default)s . This option is ignored if log_config_append is set.
+# (string value)
+#log_date_format = %Y-%m-%d %H:%M:%S
+
+# (Optional) Name of log file to send logging output to. If no default is set, logging will go to stderr as defined by use_stderr. This
+# option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logfile
+#log_file = <None>
+
+# (Optional) The base directory used for relative log_file  paths. This option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logdir
+#log_dir = <None>
+
+# Uses logging handler designed to watch file system. When log file is moved or removed this handler will open a new log file with specified
+# path instantaneously. It makes sense only if log_file option is specified and Linux platform is used. This option is ignored if
+# log_config_append is set. (boolean value)
+#watch_log_file = false
+
+# Use syslog for logging. Existing syslog format is DEPRECATED and will be changed later to honor RFC5424. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_syslog = false
+
+# Syslog facility to receive log lines. This option is ignored if log_config_append is set. (string value)
+#syslog_log_facility = LOG_USER
+
+# Log output to standard error. This option is ignored if log_config_append is set. (boolean value)
+#use_stderr = true
+
+# Format string to use for log messages with context. (string value)
+#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
+
+# Format string to use for log messages when context is undefined. (string value)
+#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
+
+# Additional data to append to log message when logging level for the message is DEBUG. (string value)
+#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
+
+# Prefix each line of exception output with this format. (string value)
+#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
+
+# Defines the format string for %(user_identity)s that is used in logging_context_format_string. (string value)
+#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
+
+# List of package logging levels in logger=LEVEL pairs. This option is ignored if log_config_append is set. (list value)
+#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
+
+# Enables or disables publication of error events. (boolean value)
+#publish_errors = false
+
+# The format for an instance that is passed with the log message. (string value)
+#instance_format = "[instance: %(uuid)s] "
+
+# The format for an instance UUID that is passed with the log message. (string value)
+#instance_uuid_format = "[instance: %(uuid)s] "
+
+# Enables or disables fatal status of deprecations. (boolean value)
+#fatal_deprecations = false
+
+
+[agent]
+
+#
+# From neutron.ml2.ovs.agent
+#
+
+# The number of seconds the agent will wait between polling for local device changes. (integer value)
+#polling_interval = 2
+
+# Minimize polling by monitoring ovsdb for interface changes. (boolean value)
+#minimize_polling = true
+
+# The number of seconds to wait before respawning the ovsdb monitor after losing communication with it. (integer value)
+#ovsdb_monitor_respawn_interval = 30
+
+# Network types supported by the agent (gre and/or vxlan). (list value)
+#tunnel_types =
+tunnel_types =vxlan
+
+# The UDP port to use for VXLAN tunnels. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#vxlan_udp_port = 4789
+vxlan_udp_port = 4789
+
+# MTU size of veth interfaces (integer value)
+#veth_mtu = 9000
+
+{%- if "vxlan" in neutron.backend.tenant_network_types %}
+# Use ML2 l2population mechanism driver to learn remote MAC and IPs and improve tunnel scalability. (boolean value)
+#l2_population = false
+l2_population = True
+
+# Enable local ARP responder if it is supported. Requires OVS 2.1 and ML2 l2population driver. Allows the switch (when supporting an
+# overlay) to respond to an ARP request locally without performing a costly ARP broadcast into the overlay. (boolean value)
+#arp_responder = false
+arp_responder = True
+{%- endif %}
+
+# Enable suppression of ARP responses that don't match an IP address that belongs to the port from which they originate. Note: This prevents
+# the VMs attached to this agent from spoofing, it doesn't protect them from other devices which have the capability to spoof (e.g. bare
+# metal or VMs attached to agents without this flag set to True). Spoofing rules will not be added to any ports that have port security
+# disabled. For LinuxBridge, this requires ebtables. For OVS, it requires a version that supports matching ARP headers. This option will be
+# removed in Newton so the only way to disable protection will be via the port security extension. (boolean value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#prevent_arp_spoofing = true
+
+# Set or un-set the don't fragment (DF) bit on outgoing IP packet carrying GRE/VXLAN tunnel. (boolean value)
+#dont_fragment = true
+
+# Make the l2 agent run in DVR mode. (boolean value)
+#enable_distributed_routing = false
+enable_distributed_routing = {{ neutron.get('dvr', 'False') }}
+
+# Set new timeout in seconds for new rpc calls after agent receives SIGTERM. If value is set to 0, rpc timeout won't be changed (integer
+# value)
+#quitting_rpc_timeout = 10
+
+# Reset flow table on start. Setting this to True will cause brief traffic interruption. (boolean value)
+#drop_flows_on_start = false
+drop_flows_on_start = False
+
+# Set or un-set the tunnel header checksum  on outgoing IP packet carrying GRE/VXLAN tunnel. (boolean value)
+#tunnel_csum = false
+
+# Selects the Agent Type reported (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#agent_type = Open vSwitch agent
+
+
+[ovs]
+
+#
+# From neutron.ml2.ovs.agent
+#
+
+# Integration bridge to use. Do not change this parameter unless you have a good reason to. This is the name of the OVS integration bridge.
+# There is one per hypervisor. The integration bridge acts as a virtual 'patch bay'. All VM VIFs are attached to this bridge and then
+# 'patched' according to their network connectivity. (string value)
+#integration_bridge = br-int
+integration_bridge = br-int
+
+# Tunnel bridge to use. (string value)
+#tunnel_bridge = br-tun
+tunnel_bridge = br-tun
+
+# Peer patch port in integration bridge for tunnel bridge. (string value)
+#int_peer_patch_port = patch-tun
+
+# Peer patch port in tunnel bridge for integration bridge. (string value)
+#tun_peer_patch_port = patch-int
+
+# Local IP address of tunnel endpoint. Can be either an IPv4 or IPv6 address. (IP address value)
+#local_ip = <None>
+local_ip = {{ neutron.local_ip }}
+
+# Comma-separated list of <physical_network>:<bridge> tuples mapping physical network names to the agent's node-specific Open vSwitch bridge
+# names to be used for flat and VLAN networks. The length of bridge names should be no more than 11. Each bridge must exist, and should have
+# a physical network interface configured as a port. All physical networks configured on the server should have mappings to appropriate
+# bridges on each agent. Note: If you remove a bridge from this mapping, make sure to disconnect it from the integration bridge as it won't
+# be managed by the agent anymore. Deprecated for ofagent. (list value)
+#bridge_mappings =
+{%- if "vlan" in neutron.backend.tenant_network_types %}
+bridge_mappings ={%- if neutron.get('external_access', True) %}physnet1:br-floating,{%- endif %}physnet2:br-prv
+{%- elif neutron.get('external_access', True) %}
+bridge_mappings =physnet1:br-floating
+{%- endif %}
+# Use veths instead of patch ports to interconnect the integration bridge to physical networks. Support kernel without Open vSwitch patch
+# port support so long as it is set to True. (boolean value)
+#use_veth_interconnection = false
+
+# OpenFlow interface to use. (string value)
+# Allowed values: ovs-ofctl, native
+#of_interface = ovs-ofctl
+
+# OVS datapath to use. 'system' is the default value and corresponds to the kernel datapath. To enable the userspace datapath set this value
+# to 'netdev'. (string value)
+# Allowed values: system, netdev
+#datapath_type = system
+
+# OVS vhost-user socket directory. (string value)
+#vhostuser_socket_dir = /var/run/openvswitch
+
+# Address to listen on for OpenFlow connections. Used only for 'native' driver. (IP address value)
+#of_listen_address = 127.0.0.1
+
+# Port to listen on for OpenFlow connections. Used only for 'native' driver. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#of_listen_port = 6633
+
+# Timeout in seconds to wait for the local switch connecting the controller. Used only for 'native' driver. (integer value)
+#of_connect_timeout = 30
+
+# Timeout in seconds to wait for a single OpenFlow request. Used only for 'native' driver. (integer value)
+#of_request_timeout = 10
+
+# The interface for interacting with the OVSDB (string value)
+# Allowed values: vsctl, native
+#ovsdb_interface = vsctl
+
+# The connection string for the native OVSDB backend. Requires the native ovsdb_interface to be enabled. (string value)
+#ovsdb_connection = tcp:127.0.0.1:6640
+
+[securitygroup]
+
+#
+# From neutron.ml2.ovs.agent
+#
+
+# Driver for security groups firewall in the L2 agent (string value)
+#firewall_driver = <None>
+firewall_driver = neutron.agent.linux.iptables_firewall.OVSHybridIptablesFirewallDriver
+
+# Controls whether the neutron security group API is enabled in the server. It should be false when using no security groups or using the
+# nova security group API. (boolean value)
+#enable_security_group = true
+enable_security_group = True
+
+# Use ipset to speed-up the iptables based security groups. Enabling ipset support requires that ipset is installed on L2 agent node.
+# (boolean value)
+#enable_ipset = true