diff --git a/CHANGELOG.rst b/CHANGELOG.rst
index c60c439..dfe6212 100644
--- a/CHANGELOG.rst
+++ b/CHANGELOG.rst
@@ -1,13 +1,18 @@
 kubernetes formula
 ==================
 
+2016.8.3 (2016-08-12)
+
+- remove obsolete kube-addons scripts
+
+2016.8.2 (2016-08-10)
+
+- minor fixes
+
 2016.8.1 (2016-08-05)
 
 - second release
 
-Kubernetes formula
-==================
-
 0.0.1 (2016-06-13)
 
 - Initial formula setup
diff --git a/README.rst b/README.rst
index 27991fc..7005d62 100644
--- a/README.rst
+++ b/README.rst
@@ -461,7 +461,7 @@
         type: emptyDir
 
 Documentation and Bugs
-============================
+======================
 
 To learn how to deploy OpenStack Salt, consult the documentation available
 online at:
@@ -485,3 +485,9 @@
 Developers should also join the discussion on the IRC list, at:
 
     https://wiki.openstack.org/wiki/Meetings/openstack-salt
+
+Copyright and authors
+=====================
+
+(c) 2016 tcp cloud a.s.
+(c) 2016 OpenStack Foundation
diff --git a/VERSION b/VERSION
index f53ae90..fcb3100 100644
--- a/VERSION
+++ b/VERSION
@@ -1 +1 @@
-2016.8.1
+2016.8.3
diff --git a/kubernetes/files/kube-addons/kube-addon-update.sh b/kubernetes/files/kube-addons/kube-addon-update.sh
deleted file mode 100644
index 77534a1..0000000
--- a/kubernetes/files/kube-addons/kube-addon-update.sh
+++ /dev/null
@@ -1,507 +0,0 @@
-#!/bin/bash
-
-# Copyright 2015 The Kubernetes Authors All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-# The business logic for whether a given object should be created
-# was already enforced by salt, and /etc/kubernetes/addons is the
-# managed result is of that. Start everything below that directory.
-
-# Parameters
-# $1 path to add-ons
-
-
-# LIMITATIONS
-# 1. controllers are not updated unless their name is changed
-# 3. Services will not be updated unless their name is changed,
-#    but for services we actually want updates without name change.
-# 4. Json files are not handled at all. Currently addons must be
-#    in yaml files
-# 5. exit code is probably not always correct (I haven't checked
-#    carefully if it works in 100% cases)
-# 6. There are no unittests
-# 8. Will not work if the total length of paths to addons is greater than
-#    bash can handle. Probably it is not a problem: ARG_MAX=2097152 on GCE.
-# 9. Performance issue: yaml files are read many times in a single execution.
-
-# cosmetic improvements to be done
-# 1. improve the log function; add timestamp, file name, etc.
-# 2. logging doesn't work from files that print things out.
-# 3. kubectl prints the output to stderr (the output should be captured and then
-#    logged)
-
-
-
-# global config
-KUBECTL=${TEST_KUBECTL:-}   # substitute for tests
-KUBECTL=${KUBECTL:-${KUBECTL_BIN:-}}
-KUBECTL=${KUBECTL:-/usr/local/bin/kubectl}
-if [[ ! -x ${KUBECTL} ]]; then
-    echo "ERROR: kubectl command (${KUBECTL}) not found or is not executable" 1>&2
-    exit 1
-fi
-
-# If an add-on definition is incorrect, or a definition has just disappeared
-# from the local directory, the script will still keep on retrying.
-# The script does not end until all retries are done, so
-# one invalid manifest may block updates of other add-ons.
-# Be careful how you set these parameters
-NUM_TRIES=1    # will be updated based on input parameters
-DELAY_AFTER_ERROR_SEC=${TEST_DELAY_AFTER_ERROR_SEC:=10}
-
-
-# remember that you can't log from functions that print some output (because
-# logs are also printed on stdout)
-# $1 level
-# $2 message
-function log() {
-  # manage log levels manually here
-
-  # add the timestamp if you find it useful
-  case $1 in
-    DB3 )
-#        echo "$1: $2"
-        ;;
-    DB2 )
-#        echo "$1: $2"
-        ;;
-    DBG )
-#        echo "$1: $2"
-        ;;
-    INFO )
-        echo "$1: $2"
-        ;;
-    WRN )
-        echo "$1: $2"
-        ;;
-    ERR )
-        echo "$1: $2"
-        ;;
-    * )
-        echo "INVALID_LOG_LEVEL $1: $2"
-        ;;
-  esac
-}
-
-#$1 yaml file path
-function get-object-kind-from-file() {
-    # prints to stdout, so log cannot be used
-    #WARNING: only yaml is supported
-    cat $1 | python -c '''
-try:
-        import pipes,sys,yaml
-        y = yaml.load(sys.stdin)
-        labels = y["metadata"]["labels"]
-        if ("kubernetes.io/cluster-service", "true") not in labels.iteritems():
-            # all add-ons must have the label "kubernetes.io/cluster-service".
-            # Otherwise we are ignoring them (the update will not work anyway)
-            print "ERROR"
-        else:
-            print y["kind"]
-except Exception, ex:
-        print "ERROR"
-    '''
-}
-
-# $1 yaml file path
-# returns a string of the form <namespace>/<name> (we call it nsnames)
-function get-object-nsname-from-file() {
-    # prints to stdout, so log cannot be used
-    #WARNING: only yaml is supported
-    #addons that do not specify a namespace are assumed to be in "default".
-    cat $1 | python -c '''
-try:
-        import pipes,sys,yaml
-        y = yaml.load(sys.stdin)
-        labels = y["metadata"]["labels"]
-        if ("kubernetes.io/cluster-service", "true") not in labels.iteritems():
-            # all add-ons must have the label "kubernetes.io/cluster-service".
-            # Otherwise we are ignoring them (the update will not work anyway)
-            print "ERROR"
-        else:
-            try:
-                print "%s/%s" % (y["metadata"]["namespace"], y["metadata"]["name"])
-            except Exception, ex:
-                print "default/%s" % y["metadata"]["name"]
-except Exception, ex:
-        print "ERROR"
-    '''
-}
-
-# $1 addon directory path
-# $2 addon type (e.g. ReplicationController)
-# echoes the string with paths to files containing addon for the given type
-# works only for yaml files (!) (ignores json files)
-function get-addon-paths-from-disk() {
-    # prints to stdout, so log cannot be used
-    local -r addon_dir=$1
-    local -r obj_type=$2
-    local kind
-    local file_path
-    for file_path in $(find ${addon_dir} -name \*.yaml); do
-        kind=$(get-object-kind-from-file ${file_path})
-        # WARNING: assumption that the topmost indentation is zero (I'm not sure yaml allows for topmost indentation)
-        if [[ "${kind}" == "${obj_type}" ]]; then
-            echo ${file_path}
-        fi
-    done
-}
-
-# waits for all subprocesses
-# returns 0 if all of them were successful and 1 otherwise
-function wait-for-jobs() {
-    local rv=0
-    local pid
-    for pid in $(jobs -p); do
-        wait ${pid}
-        if [[ $? -ne 0 ]]; then
-            rv=1;
-            log ERR "error in pid ${pid}"
-        fi
-        log DB2 "pid ${pid} completed, current error code: ${rv}"
-    done
-    return ${rv}
-}
-
-
-function run-until-success() {
-    local -r command=$1
-    local tries=$2
-    local -r delay=$3
-    local -r command_name=$1
-    while [ ${tries} -gt 0 ]; do
-        log DBG "executing: '$command'"
-        # let's give the command as an argument to bash -c, so that we can use
-        # && and || inside the command itself
-        /bin/bash -c "${command}" && \
-            log DB3 "== Successfully executed ${command_name} at $(date -Is) ==" && \
-            return 0
-        let tries=tries-1
-        log INFO "== Failed to execute ${command_name} at $(date -Is). ${tries} tries remaining. =="
-        sleep ${delay}
-    done
-    return 1
-}
-
-# $1 object type
-# returns a list of <namespace>/<name> pairs (nsnames)
-function get-addon-nsnames-from-server() {
-    local -r obj_type=$1
-    "${KUBECTL}" get "${obj_type}" --all-namespaces -o go-template="{{range.items}}{{.metadata.namespace}}/{{.metadata.name}} {{end}}" --api-version=v1 -l kubernetes.io/cluster-service=true
-}
-
-# returns the characters after the last separator (including)
-# If the separator is empty or if it doesn't appear in the string,
-# an empty string is printed
-# $1 input string
-# $2 separator (must be single character, or empty)
-function get-suffix() {
-    # prints to stdout, so log cannot be used
-    local -r input_string=$1
-    local -r separator=$2
-    local suffix
-
-    if [[ "${separator}" == "" ]]; then
-        echo ""
-        return
-    fi
-
-    if  [[ "${input_string}" == *"${separator}"* ]]; then
-        suffix=$(echo "${input_string}" | rev | cut -d "${separator}" -f1 | rev)
-        echo "${separator}${suffix}"
-    else
-        echo ""
-    fi
-}
-
-# returns the characters up to the last '-' (without it)
-# $1 input string
-# $2 separator
-function get-basename() {
-    # prints to stdout, so log cannot be used
-    local -r input_string=$1
-    local -r separator=$2
-    local suffix
-    suffix="$(get-suffix ${input_string} ${separator})"
-    # this will strip the suffix (if matches)
-    echo ${input_string%$suffix}
-}
-
-function stop-object() {
-    local -r obj_type=$1
-    local -r namespace=$2
-    local -r obj_name=$3
-    log INFO "Stopping ${obj_type} ${namespace}/${obj_name}"
-
-    run-until-success "${KUBECTL} stop --namespace=${namespace} ${obj_type} ${obj_name}" ${NUM_TRIES} ${DELAY_AFTER_ERROR_SEC}
-}
-
-function create-object() {
-    local -r obj_type=$1
-    local -r file_path=$2
-
-    local nsname_from_file
-    nsname_from_file=$(get-object-nsname-from-file ${file_path})
-    if [[ "${nsname_from_file}" == "ERROR" ]]; then
-       log INFO "Cannot read object name from ${file_path}. Ignoring"
-       return 1
-    fi
-    IFS='/' read namespace obj_name <<< "${nsname_from_file}"
-
-    log INFO "Creating new ${obj_type} from file ${file_path} in namespace ${namespace}, name: ${obj_name}"
-    # this will keep on failing if the ${file_path} disappeared in the meantime.
-    # Do not use too many retries.
-    run-until-success "${KUBECTL} create --namespace=${namespace} -f ${file_path}" ${NUM_TRIES} ${DELAY_AFTER_ERROR_SEC}
-}
-
-function update-object() {
-    local -r obj_type=$1
-    local -r namespace=$2
-    local -r obj_name=$3
-    local -r file_path=$4
-    log INFO "updating the ${obj_type} ${namespace}/${obj_name} with the new definition ${file_path}"
-    stop-object ${obj_type} ${namespace} ${obj_name}
-    create-object ${obj_type} ${file_path}
-}
-
-# deletes the objects from the server
-# $1 object type
-# $2 a list of object nsnames
-function stop-objects() {
-    local -r obj_type=$1
-    local -r obj_nsnames=$2
-    local namespace
-    local obj_name
-    for nsname in ${obj_nsnames}; do
-        IFS='/' read namespace obj_name <<< "${nsname}"
-        stop-object ${obj_type} ${namespace} ${obj_name} &
-    done
-}
-
-# creates objects from the given files
-# $1 object type
-# $2 a list of paths to definition files
-function create-objects() {
-    local -r obj_type=$1
-    local -r file_paths=$2
-    local file_path
-    for file_path in ${file_paths}; do
-        # Remember that the file may have disappear by now
-        # But we don't want to check it here because
-        # such race condition may always happen after
-        # we check it. Let's have the race
-        # condition happen a bit more often so that
-        # we see that our tests pass anyway.
-        create-object ${obj_type} ${file_path} &
-    done
-}
-
-# updates objects
-# $1 object type
-# $2 a list of update specifications
-# each update specification is a ';' separated pair: <nsname>;<file path>
-function update-objects() {
-    local -r obj_type=$1      # ignored
-    local -r update_spec=$2
-    local objdesc
-    local nsname
-    local obj_name
-    local namespace
-
-    for objdesc in ${update_spec}; do
-        IFS=';' read nsname file_path <<< "${objdesc}"
-        IFS='/' read namespace obj_name <<< "${nsname}"
-
-        update-object ${obj_type} ${namespace} ${obj_name} ${file_path} &
-    done
-}
-
-# Global variables set by function match-objects.
-nsnames_for_delete=""   # a list of object nsnames to be deleted
-for_update=""           # a list of pairs <nsname>;<filePath> for objects that should be updated
-nsnames_for_ignore=""   # a list of object nsnames that will be ignored
-new_files=""            # a list of file paths that weren't matched by any existing objects (these objects must be created now)
-
-
-# $1 path to files with objects
-# $2 object type in the API (ReplicationController or Service)
-# $3 name separator (single character or empty)
-function match-objects() {
-    local -r addon_dir=$1
-    local -r obj_type=$2
-    local -r separator=$3
-
-    # output variables (globals)
-    nsnames_for_delete=""
-    for_update=""
-    nsnames_for_ignore=""
-    new_files=""
-
-    addon_nsnames_on_server=$(get-addon-nsnames-from-server "${obj_type}")
-    addon_paths_in_files=$(get-addon-paths-from-disk "${addon_dir}" "${obj_type}")
-
-    log DB2 "addon_nsnames_on_server=${addon_nsnames_on_server}"
-    log DB2 "addon_paths_in_files=${addon_paths_in_files}"
-
-    local matched_files=""
-
-    local basensname_on_server=""
-    local nsname_on_server=""
-    local suffix_on_server=""
-    local nsname_from_file=""
-    local suffix_from_file=""
-    local found=0
-    local addon_path=""
-
-    # objects that were moved between namespaces will have different nsname
-    # because the namespace is included. So they will be treated
-    # like different objects and not updated but deleted and created again
-    # (in the current version update is also delete+create, so it does not matter)
-    for nsname_on_server in ${addon_nsnames_on_server}; do
-        basensname_on_server=$(get-basename ${nsname_on_server} ${separator})
-        suffix_on_server="$(get-suffix ${nsname_on_server} ${separator})"
-
-        log DB3 "Found existing addon ${nsname_on_server}, basename=${basensname_on_server}"
-
-        # check if the addon is present in the directory and decide
-        # what to do with it
-        # this is not optimal because we're reading the files over and over
-        # again. But for small number of addons it doesn't matter so much.
-        found=0
-        for addon_path in ${addon_paths_in_files}; do
-            nsname_from_file=$(get-object-nsname-from-file ${addon_path})
-            if [[ "${nsname_from_file}" == "ERROR" ]]; then
-                log INFO "Cannot read object name from ${addon_path}. Ignoring"
-                continue
-            else
-                log DB2 "Found object name '${nsname_from_file}' in file ${addon_path}"
-            fi
-            suffix_from_file="$(get-suffix ${nsname_from_file} ${separator})"
-
-            log DB3 "matching: ${basensname_on_server}${suffix_from_file} == ${nsname_from_file}"
-            if [[ "${basensname_on_server}${suffix_from_file}" == "${nsname_from_file}" ]]; then
-                log DB3 "matched existing ${obj_type} ${nsname_on_server} to file ${addon_path}; suffix_on_server=${suffix_on_server}, suffix_from_file=${suffix_from_file}"
-                found=1
-                matched_files="${matched_files} ${addon_path}"
-                if [[ "${suffix_on_server}" == "${suffix_from_file}" ]]; then
-                    nsnames_for_ignore="${nsnames_for_ignore} ${nsname_from_file}"
-                else
-                    for_update="${for_update} ${nsname_on_server};${addon_path}"
-                fi
-                break
-            fi
-        done
-        if [[ ${found} -eq 0 ]]; then
-            log DB2 "No definition file found for replication controller ${nsname_on_server}. Scheduling for deletion"
-            nsnames_for_delete="${nsnames_for_delete} ${nsname_on_server}"
-        fi
-    done
-
-    log DB3 "matched_files=${matched_files}"
-
-
-    # note that if the addon file is invalid (or got removed after listing files
-    # but before we managed to match it) it will not be matched to any
-    # of the existing objects. So we will treat it as a new file
-    # and try to create its object.
-    for addon_path in ${addon_paths_in_files}; do
-        echo ${matched_files} | grep "${addon_path}" >/dev/null
-        if [[ $? -ne 0 ]]; then
-            new_files="${new_files} ${addon_path}"
-        fi
-    done
-}
-
-
-
-function reconcile-objects() {
-    local -r addon_path=$1
-    local -r obj_type=$2
-    local -r separator=$3    # name separator
-    match-objects ${addon_path} ${obj_type} ${separator}
-
-    log DBG "${obj_type}: nsnames_for_delete=${nsnames_for_delete}"
-    log DBG "${obj_type}: for_update=${for_update}"
-    log DBG "${obj_type}: nsnames_for_ignore=${nsnames_for_ignore}"
-    log DBG "${obj_type}: new_files=${new_files}"
-
-    stop-objects "${obj_type}" "${nsnames_for_delete}"
-    # wait for jobs below is a protection against changing the basename
-    # of a replication controllerm without changing the selector.
-    # If we don't wait, the new rc may be created before the old one is deleted
-    # In such case the old one will wait for all its pods to be gone, but the pods
-    # are created by the new replication controller.
-    # passing --cascade=false could solve the problem, but we want
-    # all orphan pods to be deleted.
-    wait-for-jobs
-    stopResult=$?
-
-    create-objects "${obj_type}" "${new_files}"
-    update-objects "${obj_type}" "${for_update}"
-
-    local nsname
-    for nsname in ${nsnames_for_ignore}; do
-        log DB2 "The ${obj_type} ${nsname} is already up to date"
-    done
-
-    wait-for-jobs
-    createUpdateResult=$?
-
-    if [[ ${stopResult} -eq 0 ]] && [[ ${createUpdateResult} -eq 0 ]]; then
-        return 0
-    else
-        return 1
-    fi
-}
-
-function update-addons() {
-    local -r addon_path=$1
-    # be careful, reconcile-objects uses global variables
-    reconcile-objects ${addon_path} ReplicationController "-" &
-
-    # We don't expect names to be versioned for the following kinds, so
-    # we match the entire name, ignoring version suffix.
-    # That's why we pass an empty string as the version separator.
-    # If the description differs on disk, the object should be recreated.
-    # This is not implemented in this version.
-    reconcile-objects ${addon_path} Service "" &
-    reconcile-objects ${addon_path} PersistentVolume "" &
-    reconcile-objects ${addon_path} PersistentVolumeClaim "" &
-
-    wait-for-jobs
-    if [[ $? -eq 0 ]]; then
-        log INFO "== Kubernetes addon update completed successfully at $(date -Is) =="
-    else
-        log WRN "== Kubernetes addon update completed with errors at $(date -Is) =="
-    fi
-}
-
-# input parameters:
-# $1 input directory
-# $2 retry period in seconds - the script will retry api-server errors for approximately
-#     this amound of time (it is not very precise), at interval equal $DELAY_AFTER_ERROR_SEC.
-#
-
-if [[ $# -ne 2 ]]; then
-    echo "Illegal number of parameters. Usage $0 addon-dir [retry-period]" 1>&2
-    exit 1
-fi
-
-NUM_TRIES=$(($2 / ${DELAY_AFTER_ERROR_SEC}))
-if [[ ${NUM_TRIES} -le 0 ]]; then
-    NUM_TRIES=1
-fi
-
-addon_path=$1
-update-addons ${addon_path}
\ No newline at end of file
diff --git a/kubernetes/files/kube-addons/kube-addons.service b/kubernetes/files/kube-addons/kube-addons.service
deleted file mode 100644
index 920f356..0000000
--- a/kubernetes/files/kube-addons/kube-addons.service
+++ /dev/null
@@ -1,9 +0,0 @@
-[Unit]
-Description=Kubernetes Addon Object Manager
-Documentation=https://github.com/GoogleCloudPlatform/kubernetes
-
-[Service]
-ExecStart=/etc/kubernetes/kube-addons.sh
-
-[Install]
-WantedBy=multi-user.target
\ No newline at end of file
diff --git a/kubernetes/files/kube-addons/kube-addons.sh b/kubernetes/files/kube-addons/kube-addons.sh
deleted file mode 100644
index c1deea1..0000000
--- a/kubernetes/files/kube-addons/kube-addons.sh
+++ /dev/null
@@ -1,226 +0,0 @@
-#!/bin/bash
-
-# Copyright 2014 The Kubernetes Authors All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-# The business logic for whether a given object should be created
-# was already enforced by salt, and /etc/kubernetes/addons is the
-# managed result is of that. Start everything below that directory.
-KUBECTL=${KUBECTL_BIN:-/usr/local/bin/kubectl}
-
-ADDON_CHECK_INTERVAL_SEC=${TEST_ADDON_CHECK_INTERVAL_SEC:-600}
-
-SYSTEM_NAMESPACE=kube-system
-token_dir=${TOKEN_DIR:-/srv/kubernetes}
-
-function create-kubeconfig-secret() {
-  local -r token=$1
-  local -r username=$2
-  local -r server=$3
-  local -r safe_username=$(tr -s ':_' '--' <<< "${username}")
-
-  # Make a kubeconfig file with the token.
-  if [[ ! -z "${CA_CERT:-}" ]]; then
-    # If the CA cert is available, put it into the secret rather than using
-    # insecure-skip-tls-verify.
-    read -r -d '' kubeconfig <<EOF
-apiVersion: v1
-kind: Config
-users:
-- name: ${username}
-  user:
-    token: ${token}
-clusters:
-- name: local
-  cluster:
-     server: ${server}
-     certificate-authority-data: ${CA_CERT}
-contexts:
-- context:
-    cluster: local
-    user: ${username}
-    namespace: ${SYSTEM_NAMESPACE} 
-  name: service-account-context
-current-context: service-account-context
-EOF
-  else
-    read -r -d '' kubeconfig <<EOF
-apiVersion: v1
-kind: Config
-users:
-- name: ${username}
-  user:
-    token: ${token}
-clusters:
-- name: local
-  cluster:
-     server: ${server}
-     insecure-skip-tls-verify: true
-contexts:
-- context:
-    cluster: local
-    user: ${username}
-    namespace: ${SYSTEM_NAMESPACE}
-  name: service-account-context
-current-context: service-account-context
-EOF
-  fi
-
-  local -r kubeconfig_base64=$(echo "${kubeconfig}" | base64 -w0)
-  read -r -d '' secretyaml <<EOF
-apiVersion: v1
-data:
-  kubeconfig: ${kubeconfig_base64}
-kind: Secret
-metadata:
-  name: token-${safe_username}
-type: Opaque
-EOF
-  create-resource-from-string "${secretyaml}" 100 10 "Secret-for-token-for-user-${username}" "${SYSTEM_NAMESPACE}" &
-}
-
-# $1 filename of addon to start.
-# $2 count of tries to start the addon.
-# $3 delay in seconds between two consecutive tries
-# $4 namespace
-function start_addon() {
-  local -r addon_filename=$1;
-  local -r tries=$2;
-  local -r delay=$3;
-  local -r namespace=$4
-
-  create-resource-from-string "$(cat ${addon_filename})" "${tries}" "${delay}" "${addon_filename}" "${namespace}"
-}
-
-# $1 string with json or yaml.
-# $2 count of tries to start the addon.
-# $3 delay in seconds between two consecutive tries
-# $4 name of this object to use when logging about it.
-# $5 namespace for this object
-function create-resource-from-string() {
-  local -r config_string=$1;
-  local tries=$2;
-  local -r delay=$3;
-  local -r config_name=$4;
-  local -r namespace=$5;
-  while [ ${tries} -gt 0 ]; do
-    echo "${config_string}" | ${KUBECTL} --namespace="${namespace}" create -f - && \
-        echo "== Successfully started ${config_name} in namespace ${namespace} at $(date -Is)" && \
-        return 0;
-    let tries=tries-1;
-    echo "== Failed to start ${config_name} in namespace ${namespace} at $(date -Is). ${tries} tries remaining. =="
-    sleep ${delay};
-  done
-  return 1;
-}
-
-# $1 is the directory containing all of the docker images
-function load-docker-images() {
-  local success
-  local restart_docker
-  while true; do
-    success=true
-    restart_docker=false
-    for image in "$1/"*; do
-      timeout 30 docker load -i "${image}" &>/dev/null
-      rc=$?
-      if [[ "$rc" == 124 ]]; then
-        restart_docker=true
-      elif [[ "$rc" != 0 ]]; then
-        success=false
-      fi
-    done
-    if [[ "$success" == "true" ]]; then break; fi
-    if [[ "$restart_docker" == "true" ]]; then service docker restart; fi
-    sleep 15
-  done
-}
-
-# The business logic for whether a given object should be created
-# was already enforced by salt, and /etc/kubernetes/addons is the
-# managed result is of that. Start everything below that directory.
-echo "== Kubernetes addon manager started at $(date -Is) with ADDON_CHECK_INTERVAL_SEC=${ADDON_CHECK_INTERVAL_SEC} =="
-
-# Load the kube-env, which has all the environment variables we care
-# about, in a flat yaml format.
-kube_env_yaml="/var/cache/kubernetes-install/kube_env.yaml"
-if [ ! -e "${kubelet_kubeconfig_file}" ]; then
-  eval $(python -c '''
-import pipes,sys,yaml
-
-for k,v in yaml.load(sys.stdin).iteritems():
-  print "readonly {var}={value}".format(var = k, value = pipes.quote(str(v)))
-''' < "${kube_env_yaml}")
-fi
-
-# Load any images that we may need
-load-docker-images /srv/salt/kube-addons-images
-
-# Create the namespace that will be used to host the cluster-level add-ons.
-start_addon /etc/kubernetes/addons/namespace.yaml 100 10 "" &
-
-# Wait for the default service account to be created in the kube-system namespace.
-token_found=""
-while [ -z "${token_found}" ]; do
-  sleep .5
-  token_found=$(${KUBECTL} get --namespace="${SYSTEM_NAMESPACE}" serviceaccount default -o go-template="{{with index .secrets 0}}{{.name}}{{end}}" || true)
-done
-
-echo "== default service account in the ${SYSTEM_NAMESPACE} namespace has token ${token_found} =="
-
-# Generate secrets for "internal service accounts".
-# TODO(etune): move to a completely yaml/object based
-# workflow so that service accounts can be created
-# at the same time as the services that use them.
-# NOTE: needs to run as root to read this file.
-# Read each line in the csv file of tokens.
-# Expect errors when the script is started again.
-# NOTE: secrets are created asynchronously, in background.
-while read line; do
-  # Split each line into the token and username.
-  IFS=',' read -a parts <<< "${line}"
-  token=${parts[0]}
-  username=${parts[1]}
-  # DNS is special, since it's necessary for cluster bootstrapping.
-  if [[ "${username}" == "system:dns" ]] && [[ ! -z "${KUBERNETES_MASTER_NAME:-}" ]]; then
-    create-kubeconfig-secret "${token}" "${username}" "https://${KUBERNETES_MASTER_NAME}"
-  else
-    # Set the server to https://kubernetes. Pods/components that
-    # do not have DNS available will have to override the server.
-    create-kubeconfig-secret "${token}" "${username}" "https://kubernetes.default"
-  fi
-done < "${token_dir}/known_tokens.csv"
-
-# Create admission_control objects if defined before any other addon services. If the limits
-# are defined in a namespace other than default, we should still create the limits for the
-# default namespace.
-for obj in $(find /etc/kubernetes/admission-controls \( -name \*.yaml -o -name \*.json \)); do
-  start_addon "${obj}" 100 10 default &
-  echo "++ obj ${obj} is created ++"
-done
-
-# Check if the configuration has changed recently - in case the user
-# created/updated/deleted the files on the master.
-while true; do
-  start_sec=$(date +"%s")
-  #kube-addon-update.sh must be deployed in the same directory as this file
-  `dirname $0`/kube-addon-update.sh /etc/kubernetes/addons ${ADDON_CHECK_INTERVAL_SEC}
-  end_sec=$(date +"%s")
-  len_sec=$((${end_sec}-${start_sec}))
-  # subtract the time passed from the sleep time
-  if [[ ${len_sec} -lt ${ADDON_CHECK_INTERVAL_SEC} ]]; then
-    sleep_time=$((${ADDON_CHECK_INTERVAL_SEC}-${len_sec}))
-    sleep ${sleep_time}
-  fi
-done
\ No newline at end of file
diff --git a/kubernetes/master/kube-addons.sls b/kubernetes/master/kube-addons.sls
index c251861..b5e04ff 100644
--- a/kubernetes/master/kube-addons.sls
+++ b/kubernetes/master/kube-addons.sls
@@ -155,18 +155,4 @@
 
 {% endif %}
 
-/etc/kubernetes/kube-addons.sh:
-  file.managed:
-    - source: salt://kubernetes/files/kube-addons/kube-addons.sh
-    - user: root
-    - group: root
-    - mode: 755
-
-/etc/kubernetes/kube-addon-update.sh:
-  file.managed:
-    - source: salt://kubernetes/files/kube-addons/kube-addon-update.sh
-    - user: root
-    - group: root
-    - mode: 755
-
 {% endif %}
\ No newline at end of file
diff --git a/metadata.yml b/metadata.yml
index a7d25e1..3bce5d0 100644
--- a/metadata.yml
+++ b/metadata.yml
@@ -1,3 +1,3 @@
 name: "kubernetes"
-version: "2016.8.1"
+version: "2016.8.3"
 source: "https://github.com/openstack/salt-formula-kubernetes"