diff --git a/CHANGELOG.rst b/CHANGELOG.rst
new file mode 100644
index 0000000..b91e0e0
--- /dev/null
+++ b/CHANGELOG.rst
@@ -0,0 +1,6 @@
+keystone formula
+================
+
+0.0.1 (2015-08-03)
+
+- Initial formula setup
\ No newline at end of file
diff --git a/LICENSE b/LICENSE
new file mode 100644
index 0000000..8e80b12
--- /dev/null
+++ b/LICENSE
@@ -0,0 +1,13 @@
+Copyright (c) 2014-2015 tcp cloud a. s.
+
+Licensed under the Apache License, Version 2.0 (the "License");
+you may not use this file except in compliance with the License.
+You may obtain a copy of the License at
+
+   http://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing, software
+distributed under the License is distributed on an "AS IS" BASIS,
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+See the License for the specific language governing permissions and
+limitations under the License.
\ No newline at end of file
diff --git a/README.rst b/README.rst
new file mode 100644
index 0000000..2cf4bce
--- /dev/null
+++ b/README.rst
@@ -0,0 +1,182 @@
+==================
+OpenStack Keystone
+==================
+
+Keystone provides authentication, authorization and service discovery mechanisms via HTTP primarily for use by projects in the OpenStack family. It is most commonly deployed as an HTTP interface to existing identity systems, such as LDAP.
+
+From Kilo release Keystone v3 endpoint has definition without version in url
+
+.. code-block:: bash
+
+  +----------------------------------+-----------+--------------------------+--------------------------+---------------------------+----------------------------------+
+  |                id                |   region  |        publicurl         |       internalurl        |          adminurl         |            service_id            |
+  +----------------------------------+-----------+--------------------------+--------------------------+---------------------------+----------------------------------+
+  | 91663a8db11c487c9253c8c456863494 | RegionOne | http://10.0.150.37:5000/ | http://10.0.150.37:5000/ | http://10.0.150.37:35357/ | 0fd2dba3153d45a1ba7f709cfc2d69c9 |
+  +----------------------------------+-----------+--------------------------+--------------------------+---------------------------+----------------------------------+
+
+
+Sample pillars
+==============
+
+Full stacked keystone
+
+.. code-block:: yaml
+
+    keystone:
+      server:
+        enabled: true
+        version: juno
+        service_token: 'service_tokeen'
+        service_tenant: service
+        service_password: 'servicepwd'
+        admin_tenant: admin
+        admin_name: admin
+        admin_password: 'adminpwd'
+        admin_email: stackmaster@domain.com
+        roles:
+          - admin
+          - Member
+          - image_manager
+        bind:
+          address: 0.0.0.0
+          private_address: 127.0.0.1
+          private_port: 35357
+          public_address: 127.0.0.1
+          public_port: 5000
+        api_version: 2.0
+        region: RegionOne
+        database:
+          engine: mysql
+          host: '127.0.0.1'
+          name: 'keystone'
+          password: 'LfTno5mYdZmRfoPV'
+          user: 'keystone'
+
+Keystone public HTTPS API
+
+.. code-block:: yaml
+
+    keystone:
+      server:
+        enabled: true
+        version: juno
+        ...
+        services:
+        - name: nova
+          type: compute
+          description: OpenStack Compute Service
+          user:
+            name: nova
+            password: password
+          bind:
+            public_address: cloud.domain.com
+            public_protocol: https
+            public_port: 8774
+            internal_address: 10.0.0.20
+            internal_port: 8774
+            admin_address: 10.0.0.20
+            admin_port: 8774
+
+Keystone memcached storage for tokens
+
+.. code-block:: yaml
+
+    keystone:
+      server:
+        enabled: true
+        version: juno
+        ...
+        token_store: cache
+        cache:
+          engine: memcached
+          host: 127.0.0.1
+          port: 11211
+        services:
+        ...
+
+Keystone clustered memcached storage for tokens
+
+.. code-block:: yaml
+
+    keystone:
+      server:
+        enabled: true
+        version: juno
+        ...
+        token_store: cache
+        cache:
+          engine: memcached
+          members:
+          - host: 192.160.0.1
+            port: 11211
+          - host: 192.160.0.2
+            port: 11211
+        services:
+        ...
+
+Keystone client
+
+.. code-block:: yaml
+
+    keystone:
+      client:
+        enabled: true
+        server:
+          host: 10.0.0.2
+          public_port: 5000
+          private_port: 35357
+          service_token: 'token'
+          admin_tenant: admin
+          admin_name: admin
+          admin_password: 'passwd'
+
+Keystone cluster
+
+.. code-block:: yaml
+
+    keystone:
+      control:
+        enabled: true
+        provider:
+          os15_token:
+            host: 10.0.0.2
+            port: 35357
+            token: token
+          os15_tcp_core_stg:
+            host: 10.0.0.5
+            port: 5000
+            tenant: admin
+            name: admin
+            password: password
+
+Keystone fernet tokens for OpenStack Kilo release
+
+.. code-block:: yaml
+
+    keystone:
+      server:
+        ...
+        tokens:
+          engine: fernet
+        ...
+
+Read more
+=========
+
+* http://docs.openstack.org/developer/keystone/configuration.html
+* http://docs.openstack.org/developer/keystone/architecture.html
+* http://docs.saltstack.com/ref/states/all/salt.states.keystone.html
+* http://docs.saltstack.com/ref/modules/all/salt.modules.keystone.html
+* http://www.sebastien-han.fr/blog/2012/12/12/cleanup-keystone-tokens/
+* http://www-01.ibm.com/support/knowledgecenter/SS4KMC_2.2.0/com.ibm.sco.doc_2.2/t_memcached_keystone.html?lang=en
+* https://bugs.launchpad.net/tripleo/+bug/1203910
+
+Things to improve
+=================
+
+* Keystone as service provider (SP) - must be running under Apache (same as with PKI token)
+* Keystone with MongoDB backend - where is it?
+* IdP is owned by domain, domain corresponds to billable account - IdP administration
+* IdP Shiboleth alternatives - mod_auth_mellon
+
+Generally this SP/IdP stuff is a little unstable - how to let SP know identity has changed, no visibility in UI (IBM has some not in upstream yet)
diff --git a/VERSION b/VERSION
new file mode 100644
index 0000000..3b04cfb
--- /dev/null
+++ b/VERSION
@@ -0,0 +1 @@
+0.2
diff --git a/debian/changelog b/debian/changelog
new file mode 100644
index 0000000..1bcb522
--- /dev/null
+++ b/debian/changelog
@@ -0,0 +1,11 @@
+salt-formula-keystone (0.2) trusty; urgency=medium
+
+  * First public release
+
+ -- Filip Pytloun <filip.pytloun@tcpcloud.eu>  Tue, 06 Oct 2015 16:38:45 +0200
+
+salt-formula-keystone (0.1) trusty; urgency=medium
+
+  * Initial release
+
+ -- Jakub Pavlik <jakub.pavlik@tcpcloud.eu>  Thu, 13 Aug 2015 23:23:41 +0200
diff --git a/debian/compat b/debian/compat
new file mode 100644
index 0000000..ec63514
--- /dev/null
+++ b/debian/compat
@@ -0,0 +1 @@
+9
diff --git a/debian/control b/debian/control
new file mode 100644
index 0000000..82f3dc7
--- /dev/null
+++ b/debian/control
@@ -0,0 +1,15 @@
+Source: salt-formula-keystone
+Maintainer: Jakub Pavlik <jakub.pavlik@tcpcloud.eu>
+Section: admin
+Priority: optional
+Build-Depends: debhelper (>= 9)
+Standards-Version: 3.9.6
+Homepage: http://www.tcpcloud.eu
+Vcs-Browser: https://github.com/tcpcloud/salt-formula-keystone
+Vcs-Git: https://github.com/tcpcloud/salt-formula-keystone.git
+
+Package: salt-formula-keystone
+Architecture: all
+Depends: ${misc:Depends}, salt-master, reclass
+Description: Keystone Salt formula
+ Install and configure Keystone server and client.
diff --git a/debian/copyright b/debian/copyright
new file mode 100644
index 0000000..e1a127e
--- /dev/null
+++ b/debian/copyright
@@ -0,0 +1,15 @@
+Format: http://www.debian.org/doc/packaging-manuals/copyright-format/1.0/
+Upstream-Name: salt-formula-keystone
+Upstream-Contact: Jakub Pavlik <jakub.pavlik@tcpcloud.eu>
+Source: https://github.com/tcpcloud/salt-formula-keystone
+
+Files: *
+Copyright: 2014-2015 tcp cloud
+License: Apache-2.0
+  Copyright (C) 2014-2015 tcp cloud
+  .
+  Licensed under the Apache License, Version 2.0 (the "License");
+  you may not use this file except in compliance with the License.
+  .
+  On a Debian system you can find a copy of this license in
+  /usr/share/common-licenses/Apache-2.0.
diff --git a/debian/docs b/debian/docs
new file mode 100644
index 0000000..d585829
--- /dev/null
+++ b/debian/docs
@@ -0,0 +1,3 @@
+README.rst
+CHANGELOG.rst
+VERSION
diff --git a/debian/install b/debian/install
new file mode 100644
index 0000000..934ed30
--- /dev/null
+++ b/debian/install
@@ -0,0 +1,2 @@
+keystone/*             /usr/share/salt-formulas/env/keystone/
+metadata/service/*      /usr/share/salt-formulas/reclass/service/keystone/
diff --git a/debian/rules b/debian/rules
new file mode 100755
index 0000000..abde6ef
--- /dev/null
+++ b/debian/rules
@@ -0,0 +1,5 @@
+#!/usr/bin/make -f
+
+%:
+	dh $@
+
diff --git a/debian/source/format b/debian/source/format
new file mode 100644
index 0000000..89ae9db
--- /dev/null
+++ b/debian/source/format
@@ -0,0 +1 @@
+3.0 (native)
diff --git a/keystone/client.sls b/keystone/client.sls
new file mode 100644
index 0000000..2f6edbd
--- /dev/null
+++ b/keystone/client.sls
@@ -0,0 +1,48 @@
+{%- from "keystone/map.jinja" import client with context %}
+{%- if client.enabled %}
+
+keystone_client_packages:
+  pkg.installed:
+  - names: {{ client.pkgs }}
+
+{%- if client.tenant is defined %}
+
+keystone_client_roles:
+  keystone.role_present:
+  - names: {{ client.roles }}
+
+{%- for tenant_name, tenant in client.get('tenant', {}).iteritems() %}
+
+keystone_tenant_{{ tenant_name }}:
+  keystone.tenant_present:
+  - name: {{ tenant_name }}
+  - require:
+    - keystone: keystone_client_roles
+
+{%- for user_name, user in tenant.get('user', {}).iteritems() %}
+
+keystone_{{ tenant_name }}_user_{{ user_name }}:
+  keystone.user_present:
+  - name: {{ user_name }}
+  - password: {{ user.password }}
+  - email: {{ user.get('email', 'root@localhost') }}
+  - tenant: {{ tenant_name }}
+  - roles:
+      "{{ tenant_name }}":
+        {%- if user.get('is_admin', False) %}
+        - admin
+        {%- elif user.get('roles', False) %}
+        {{ user.roles }}
+        {%- else %}
+        - Member
+        {%- endif %}
+  - require:
+    - keystone: keystone_tenant_{{ tenant_name }}
+
+{%- endfor %}
+
+{%- endfor %}
+
+{%- endif %}
+
+{%- endif %}
diff --git a/keystone/client.sls.orig b/keystone/client.sls.orig
new file mode 100644
index 0000000..8a8cb30
--- /dev/null
+++ b/keystone/client.sls.orig
@@ -0,0 +1,63 @@
+{%- from "keystone/map.jinja" import client with context %}
+{%- if client.enabled %}
+
+keystone_client_packages:
+  pkg.installed:
+  - names: {{ client.pkgs }}
+
+/root/openrc:
+  file.managed:
+  - source: salt://keystone/conf/openrc
+  - template: jinja
+
+{%- if client.tenant is defined %}
+
+keystone_client_roles:
+  keystone.role_present:
+  - names: {{ client.roles }}
+
+{%- for tenant_name, tenant in client.get('tenant', {}).iteritems() %}
+
+keystone_tenant_{{ tenant_name }}:
+  keystone.tenant_present:
+  - name: {{ tenant_name }}
+  - require:
+    - keystone: keystone_client_roles
+
+{%- for user_name, user in tenant.get('user', {}).iteritems() %}
+
+keystone_{{ tenant_name }}_user_{{ user_name }}:
+  keystone.user_present:
+  - name: {{ user_name }}
+  - password: {{ user.password }}
+  - email: {{ user.get('email', 'root@localhost') }}
+  - tenant: {{ tenant_name }}
+<<<<<<< HEAD
+  - roles: 
+      "{{ tenant_name }}":
+        {%- if user.get('is_admin', False) %}
+        - admin
+        {%- else %}
+        - Member
+        {%- endif %}
+=======
+  - roles:
+    - {{ tenant_name }}:
+      {%- if user.get('is_admin', False) %}
+      - admin
+      {%- elif user.get('roles', False) %}
+      {{ user.roles }}
+      {%- else %}
+      - Member
+      {%- endif %}
+>>>>>>> Allow to define keystone roles in pillar
+  - require:
+    - keystone: keystone_tenant_{{ tenant_name }}
+
+{%- endfor %}
+
+{%- endfor %}
+
+{%- endif %}
+
+{%- endif %}
diff --git a/keystone/control.sls b/keystone/control.sls
new file mode 100644
index 0000000..5ac4f9a
--- /dev/null
+++ b/keystone/control.sls
@@ -0,0 +1,11 @@
+{%- from "keystone/map.jinja" import control with context %}
+{%- for provider_name, provider in control.get('provider', {}).iteritems() %}
+
+/root/keystonerc_{{ provider_name }}:
+  file.managed:
+  - source: salt://keystone/files/keystonerc_user
+  - template: jinja
+  - defaults:
+      provider_name: "{{ provider_name }}"
+
+{%- endfor %}
diff --git a/keystone/files/juno/keystone-paste.ini.Debian b/keystone/files/juno/keystone-paste.ini.Debian
new file mode 100644
index 0000000..46f994c
--- /dev/null
+++ b/keystone/files/juno/keystone-paste.ini.Debian
@@ -0,0 +1,121 @@
+# Keystone PasteDeploy configuration file.
+
+[filter:debug]
+paste.filter_factory = keystone.common.wsgi:Debug.factory
+
+[filter:build_auth_context]
+paste.filter_factory = keystone.middleware:AuthContextMiddleware.factory
+
+[filter:token_auth]
+paste.filter_factory = keystone.middleware:TokenAuthMiddleware.factory
+
+[filter:admin_token_auth]
+paste.filter_factory = keystone.middleware:AdminTokenAuthMiddleware.factory
+
+[filter:xml_body]
+paste.filter_factory = keystone.middleware:XmlBodyMiddleware.factory
+
+[filter:xml_body_v2]
+paste.filter_factory = keystone.middleware:XmlBodyMiddlewareV2.factory
+
+[filter:xml_body_v3]
+paste.filter_factory = keystone.middleware:XmlBodyMiddlewareV3.factory
+
+[filter:json_body]
+paste.filter_factory = keystone.middleware:JsonBodyMiddleware.factory
+
+[filter:user_crud_extension]
+paste.filter_factory = keystone.contrib.user_crud:CrudExtension.factory
+
+[filter:crud_extension]
+paste.filter_factory = keystone.contrib.admin_crud:CrudExtension.factory
+
+[filter:ec2_extension]
+paste.filter_factory = keystone.contrib.ec2:Ec2Extension.factory
+
+[filter:ec2_extension_v3]
+paste.filter_factory = keystone.contrib.ec2:Ec2ExtensionV3.factory
+
+[filter:federation_extension]
+paste.filter_factory = keystone.contrib.federation.routers:FederationExtension.factory
+
+[filter:oauth1_extension]
+paste.filter_factory = keystone.contrib.oauth1.routers:OAuth1Extension.factory
+
+[filter:s3_extension]
+paste.filter_factory = keystone.contrib.s3:S3Extension.factory
+
+[filter:endpoint_filter_extension]
+paste.filter_factory = keystone.contrib.endpoint_filter.routers:EndpointFilterExtension.factory
+
+[filter:endpoint_policy_extension]
+paste.filter_factory = keystone.contrib.endpoint_policy.routers:EndpointPolicyExtension.factory
+
+[filter:simple_cert_extension]
+paste.filter_factory = keystone.contrib.simple_cert:SimpleCertExtension.factory
+
+[filter:revoke_extension]
+paste.filter_factory = keystone.contrib.revoke.routers:RevokeExtension.factory
+
+[filter:url_normalize]
+paste.filter_factory = keystone.middleware:NormalizingFilter.factory
+
+[filter:sizelimit]
+paste.filter_factory = keystone.middleware:RequestBodySizeLimiter.factory
+
+[filter:stats_monitoring]
+paste.filter_factory = keystone.contrib.stats:StatsMiddleware.factory
+
+[filter:stats_reporting]
+paste.filter_factory = keystone.contrib.stats:StatsExtension.factory
+
+[filter:access_log]
+paste.filter_factory = keystone.contrib.access:AccessLogMiddleware.factory
+
+[app:public_service]
+paste.app_factory = keystone.service:public_app_factory
+
+[app:service_v3]
+paste.app_factory = keystone.service:v3_app_factory
+
+[app:admin_service]
+paste.app_factory = keystone.service:admin_app_factory
+
+[pipeline:public_api]
+# The last item in this pipeline must be public_service or an equivalent
+# application. It cannot be a filter.
+pipeline = sizelimit url_normalize build_auth_context token_auth admin_token_auth xml_body_v2 json_body ec2_extension user_crud_extension public_service
+
+[pipeline:admin_api]
+# The last item in this pipeline must be admin_service or an equivalent
+# application. It cannot be a filter.
+pipeline = sizelimit url_normalize build_auth_context token_auth admin_token_auth xml_body_v2 json_body ec2_extension s3_extension crud_extension admin_service
+
+[pipeline:api_v3]
+# The last item in this pipeline must be service_v3 or an equivalent
+# application. It cannot be a filter.
+pipeline = sizelimit url_normalize build_auth_context token_auth admin_token_auth xml_body_v3 json_body ec2_extension_v3 s3_extension simple_cert_extension revoke_extension service_v3
+
+[app:public_version_service]
+paste.app_factory = keystone.service:public_version_app_factory
+
+[app:admin_version_service]
+paste.app_factory = keystone.service:admin_version_app_factory
+
+[pipeline:public_version_api]
+pipeline = sizelimit url_normalize xml_body public_version_service
+
+[pipeline:admin_version_api]
+pipeline = sizelimit url_normalize xml_body admin_version_service
+
+[composite:main]
+use = egg:Paste#urlmap
+/v2.0 = public_api
+/v3 = api_v3
+/ = public_version_api
+
+[composite:admin]
+use = egg:Paste#urlmap
+/v2.0 = admin_api
+/v3 = api_v3
+/ = admin_version_api
diff --git a/keystone/files/juno/keystone.conf.Debian b/keystone/files/juno/keystone.conf.Debian
new file mode 100644
index 0000000..4d2b9a8
--- /dev/null
+++ b/keystone/files/juno/keystone.conf.Debian
@@ -0,0 +1,1718 @@
+{% from "keystone/map.jinja" import server with context %}
+[DEFAULT]
+
+#
+# Options defined in keystone
+#
+
+# A "shared secret" that can be used to bootstrap Keystone.
+# This "token" does not represent a user, and carries no
+# explicit authorization. To disable in production (highly
+# recommended), remove AdminTokenAuthMiddleware from your
+# paste application pipelines (for example, in keystone-
+# paste.ini). (string value)
+#admin_token=ADMIN
+admin_token={{ server.service_token }}
+
+# The IP address of the network interface for the public
+# service to listen on. (string value)
+# Deprecated group/name - [DEFAULT]/bind_host
+#public_bind_host=0.0.0.0
+public_bind_host={% if server.bind.address is defined %}{{ server.bind.address }}{% else %}{{ server.bind.public_address }}{% endif %}
+
+# The IP address of the network interface for the admin
+# service to listen on. (string value)
+# Deprecated group/name - [DEFAULT]/bind_host
+#admin_bind_host=0.0.0.0
+admin_bind_host={% if server.bind.address is defined %}{{ server.bind.address }}{% else %}{{ server.bind.public_address }}{% endif %}
+
+# (Deprecated) The port which the OpenStack Compute service
+# listens on. This option was only used for string replacement
+# in the templated catalog backend. Templated catalogs should
+# replace the "$(compute_port)s" substitution with the static
+# port of the compute service. As of Juno, this option is
+# deprecated and will be removed in the L release. (integer
+# value)
+#compute_port=8774
+#compute_port=8774
+
+# The port number which the admin service listens on. (integer
+# value)
+#admin_port=35357
+#admin_port=35357
+
+# The port number which the public service listens on.
+# (integer value)
+#public_port=5000
+#public_port=5000
+
+# The base public endpoint URL for Keystone that is advertised
+# to clients (NOTE: this does NOT affect how Keystone listens
+# for connections). Defaults to the base host URL of the
+# request. E.g. a request to http://server:5000/v2.0/users
+# will default to http://server:5000. You should only need to
+# set this value if the base URL contains a path (e.g.
+# /prefix/v2.0) or the endpoint should be found on a different
+# server. (string value)
+#public_endpoint=<None>
+
+# The base admin endpoint URL for Keystone that is advertised
+# to clients (NOTE: this does NOT affect how Keystone listens
+# for connections). Defaults to the base host URL of the
+# request. E.g. a request to http://server:35357/v2.0/users
+# will default to http://server:35357. You should only need to
+# set this value if the base URL contains a path (e.g.
+# /prefix/v2.0) or the endpoint should be found on a different
+# server. (string value)
+#admin_endpoint=<None>
+
+# The number of worker processes to serve the public WSGI
+# application. Defaults to number of CPUs (minimum of 2).
+# (integer value)
+#public_workers=<None>
+
+# The number of worker processes to serve the admin WSGI
+# application. Defaults to number of CPUs (minimum of 2).
+# (integer value)
+#admin_workers=<None>
+
+# Enforced by optional sizelimit middleware
+# (keystone.middleware:RequestBodySizeLimiter). (integer
+# value)
+#max_request_body_size=114688
+
+# Limit the sizes of user & project ID/names. (integer value)
+#max_param_size=64
+
+# Similar to max_param_size, but provides an exception for
+# token values. (integer value)
+#max_token_size=8192
+
+# During a SQL upgrade member_role_id will be used to create a
+# new role that will replace records in the assignment table
+# with explicit role grants. After migration, the
+# member_role_id will be used in the API add_user_to_project.
+# (string value)
+#member_role_id=9fe2ff9ee4384b1894a90878d3e92bab
+
+# During a SQL upgrade member_role_name will be used to create
+# a new role that will replace records in the assignment table
+# with explicit role grants. After migration, member_role_name
+# will be ignored. (string value)
+#member_role_name=_member_
+
+# The value passed as the keyword "rounds" to passlib's
+# encrypt method. (integer value)
+#crypt_strength=40000
+
+# Set this to true if you want to enable TCP_KEEPALIVE on
+# server sockets, i.e. sockets used by the Keystone wsgi
+# server for client connections. (boolean value)
+#tcp_keepalive=false
+
+# Sets the value of TCP_KEEPIDLE in seconds for each server
+# socket. Only applies if tcp_keepalive is true. Not supported
+# on OS X. (integer value)
+#tcp_keepidle=600
+
+# The maximum number of entities that will be returned in a
+# collection, with no limit set by default. This global limit
+# may be then overridden for a specific driver, by specifying
+# a list_limit in the appropriate section (e.g. [assignment]).
+# (integer value)
+#list_limit=<None>
+
+# Set this to false if you want to enable the ability for
+# user, group and project entities to be moved between domains
+# by updating their domain_id. Allowing such movement is not
+# recommended if the scope of a domain admin is being
+# restricted by use of an appropriate policy file (see
+# policy.v3cloudsample as an example). (boolean value)
+#domain_id_immutable=true
+
+# If set to true, strict password length checking is performed
+# for password manipulation. If a password exceeds the maximum
+# length, the operation will fail with an HTTP 403 Forbidden
+# error. If set to false, passwords are automatically
+# truncated to the maximum length. (boolean value)
+#strict_password_check=false
+
+
+#
+# Options defined in oslo.messaging
+#
+
+# Use durable queues in amqp. (boolean value)
+# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
+#amqp_durable_queues=false
+
+# Auto-delete queues in amqp. (boolean value)
+#amqp_auto_delete=false
+
+# Size of RPC connection pool. (integer value)
+#rpc_conn_pool_size=30
+
+# Qpid broker hostname. (string value)
+#qpid_hostname=localhost
+
+# Qpid broker port. (integer value)
+#qpid_port=5672
+
+# Qpid HA cluster host:port pairs. (list value)
+#qpid_hosts=$qpid_hostname:$qpid_port
+
+# Username for Qpid connection. (string value)
+#qpid_username=
+
+# Password for Qpid connection. (string value)
+#qpid_password=
+
+# Space separated list of SASL mechanisms to use for auth.
+# (string value)
+#qpid_sasl_mechanisms=
+
+# Seconds between connection keepalive heartbeats. (integer
+# value)
+#qpid_heartbeat=60
+
+# Transport to use, either 'tcp' or 'ssl'. (string value)
+#qpid_protocol=tcp
+
+# Whether to disable the Nagle algorithm. (boolean value)
+#qpid_tcp_nodelay=true
+
+# The number of prefetched messages held by receiver. (integer
+# value)
+#qpid_receiver_capacity=1
+
+# The qpid topology version to use.  Version 1 is what was
+# originally used by impl_qpid.  Version 2 includes some
+# backwards-incompatible changes that allow broker federation
+# to work.  Users should update to version 2 when they are
+# able to take everything down, as it requires a clean break.
+# (integer value)
+#qpid_topology_version=1
+
+# SSL version to use (valid only if SSL enabled). valid values
+# are TLSv1, SSLv23 and SSLv3. SSLv2 may be available on some
+# distributions. (string value)
+#kombu_ssl_version=
+
+# SSL key file (valid only if SSL enabled). (string value)
+#kombu_ssl_keyfile=
+
+# SSL cert file (valid only if SSL enabled). (string value)
+#kombu_ssl_certfile=
+
+# SSL certification authority file (valid only if SSL
+# enabled). (string value)
+#kombu_ssl_ca_certs=
+
+# How long to wait before reconnecting in response to an AMQP
+# consumer cancel notification. (floating point value)
+#kombu_reconnect_delay=1.0
+
+# The RabbitMQ broker address where a single node is used.
+# (string value)
+#rabbit_host=localhost
+
+# The RabbitMQ broker port where a single node is used.
+# (integer value)
+#rabbit_port=5672
+
+# RabbitMQ HA cluster host:port pairs. (list value)
+#rabbit_hosts=$rabbit_host:$rabbit_port
+#rabbit_hosts=127.0.0.1:5673,192.168.0.5:5673,192.168.0.6:5673
+
+# Connect over SSL for RabbitMQ. (boolean value)
+#rabbit_use_ssl=false
+
+# The RabbitMQ userid. (string value)
+#rabbit_userid=guest
+#rabbit_userid=nova
+
+# The RabbitMQ password. (string value)
+#rabbit_password=guest
+#rabbit_password=FGezNflN
+
+# the RabbitMQ login method (string value)
+#rabbit_login_method=AMQPLAIN
+
+# The RabbitMQ virtual host. (string value)
+#rabbit_virtual_host=/
+#rabbit_virtual_host=/
+
+# How frequently to retry connecting with RabbitMQ. (integer
+# value)
+#rabbit_retry_interval=1
+
+# How long to backoff for between retries when connecting to
+# RabbitMQ. (integer value)
+#rabbit_retry_backoff=2
+
+# Maximum number of RabbitMQ connection retries. Default is 0
+# (infinite retry count). (integer value)
+#rabbit_max_retries=0
+
+# Use HA queues in RabbitMQ (x-ha-policy: all). If you change
+# this option, you must wipe the RabbitMQ database. (boolean
+# value)
+#rabbit_ha_queues=false
+#rabbit_ha_queues=True
+
+# If passed, use a fake RabbitMQ provider. (boolean value)
+#fake_rabbit=false
+
+# ZeroMQ bind address. Should be a wildcard (*), an ethernet
+# interface, or IP. The "host" option should point or resolve
+# to this address. (string value)
+#rpc_zmq_bind_address=*
+
+# MatchMaker driver. (string value)
+#rpc_zmq_matchmaker=oslo.messaging._drivers.matchmaker.MatchMakerLocalhost
+
+# ZeroMQ receiver listening port. (integer value)
+#rpc_zmq_port=9501
+
+# Number of ZeroMQ contexts, defaults to 1. (integer value)
+#rpc_zmq_contexts=1
+
+# Maximum number of ingress messages to locally buffer per
+# topic. Default is unlimited. (integer value)
+#rpc_zmq_topic_backlog=<None>
+
+# Directory for holding IPC sockets. (string value)
+#rpc_zmq_ipc_dir=/var/run/openstack
+
+# Name of this node. Must be a valid hostname, FQDN, or IP
+# address. Must match "host" option, if running Nova. (string
+# value)
+#rpc_zmq_host=keystone
+
+# Seconds to wait before a cast expires (TTL). Only supported
+# by impl_zmq. (integer value)
+#rpc_cast_timeout=30
+
+# Heartbeat frequency. (integer value)
+#matchmaker_heartbeat_freq=300
+
+# Heartbeat time-to-live. (integer value)
+#matchmaker_heartbeat_ttl=600
+
+# Size of RPC greenthread pool. (integer value)
+#rpc_thread_pool_size=64
+
+# Driver or drivers to handle sending notifications. (multi
+# valued)
+{%- if server.notification %}
+#notification_driver=
+notification_driver=messaging
+{%- endif %}
+# AMQP topic used for OpenStack notifications. (list value)
+# Deprecated group/name - [rpc_notifier2]/topics
+#notification_topics=notifications
+#notification_topics=notifications
+
+# Seconds to wait for a response from a call. (integer value)
+#rpc_response_timeout=60
+
+# A URL representing the messaging driver to use and its full
+# configuration. If not set, we fall back to the rpc_backend
+# option and driver specific configuration. (string value)
+#transport_url=<None>
+
+# The messaging driver to use, defaults to rabbit. Other
+# drivers include qpid and zmq. (string value)
+#rpc_backend=rabbit
+
+# The default exchange under which topics are scoped. May be
+# overridden by an exchange name specified in the
+# transport_url option. (string value)
+#control_exchange=keystone
+
+
+#
+# Options defined in keystone.notifications
+#
+
+# Default publisher_id for outgoing notifications (string
+# value)
+#default_publisher_id=<None>
+
+
+#
+# Options defined in keystone.openstack.common.eventlet_backdoor
+#
+
+# Enable eventlet backdoor.  Acceptable values are 0, <port>,
+# and <start>:<end>, where 0 results in listening on a random
+# tcp port number; <port> results in listening on the
+# specified port number (and not enabling backdoor if that
+# port is in use); and <start>:<end> results in listening on
+# the smallest unused port number within the specified range
+# of port numbers.  The chosen port is displayed in the
+# service's log file. (string value)
+#backdoor_port=<None>
+
+
+#
+# Options defined in keystone.openstack.common.log
+#
+
+# Print debugging output (set logging level to DEBUG instead
+# of default WARNING level). (boolean value)
+#debug=false
+debug=False
+
+# Print more verbose output (set logging level to INFO instead
+# of default WARNING level). (boolean value)
+#verbose=false
+verbose=True
+
+# Log output to standard error. (boolean value)
+#use_stderr=true
+
+# Format string to use for log messages with context. (string
+# value)
+#logging_context_format_string=%(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
+
+# Format string to use for log messages without context.
+# (string value)
+#logging_default_format_string=%(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
+
+# Data to append to log format when level is DEBUG. (string
+# value)
+#logging_debug_format_suffix=%(funcName)s %(pathname)s:%(lineno)d
+
+# Prefix each line of exception output with this format.
+# (string value)
+#logging_exception_prefix=%(asctime)s.%(msecs)03d %(process)d TRACE %(name)s %(instance)s
+
+# List of logger=LEVEL pairs. (list value)
+#default_log_levels=amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN
+
+# Enables or disables publication of error events. (boolean
+# value)
+#publish_errors=false
+
+# Enables or disables fatal status of deprecations. (boolean
+# value)
+#fatal_deprecations=false
+
+# The format for an instance that is passed with the log
+# message. (string value)
+#instance_format="[instance: %(uuid)s] "
+
+# The format for an instance UUID that is passed with the log
+# message. (string value)
+#instance_uuid_format="[instance: %(uuid)s] "
+
+# The name of a logging configuration file. This file is
+# appended to any existing logging configuration files. For
+# details about logging configuration files, see the Python
+# logging module documentation. (string value)
+# Deprecated group/name - [DEFAULT]/log_config
+#log_config_append=<None>
+
+# DEPRECATED. A logging.Formatter log message format string
+# which may use any of the available logging.LogRecord
+# attributes. This option is deprecated.  Please use
+# logging_context_format_string and
+# logging_default_format_string instead. (string value)
+#log_format=<None>
+
+# Format string for %%(asctime)s in log records. Default:
+# %(default)s . (string value)
+#log_date_format=%Y-%m-%d %H:%M:%S
+
+# (Optional) Name of log file to output to. If no default is
+# set, logging will go to stdout. (string value)
+# Deprecated group/name - [DEFAULT]/logfile
+#log_file=<None>
+
+# (Optional) The base directory used for relative --log-file
+# paths. (string value)
+# Deprecated group/name - [DEFAULT]/logdir
+log_dir=/var/log/keystone
+
+# Use syslog for logging. Existing syslog format is DEPRECATED
+# during I, and will change in J to honor RFC5424. (boolean
+# value)
+#use_syslog=false
+#use_syslog=True
+
+# (Optional) Enables or disables syslog rfc5424 format for
+# logging. If enabled, prefixes the MSG part of the syslog
+# message with APP-NAME (RFC5424). The format without the APP-
+# NAME is deprecated in I, and will be removed in J. (boolean
+# value)
+#use_syslog_rfc_format=false
+#use_syslog_rfc_format=True
+
+# Syslog facility to receive log lines. (string value)
+#syslog_log_facility=LOG_USER
+#syslog_log_facility=LOG_USER
+
+
+#
+# Options defined in keystone.openstack.common.policy
+#
+
+# The JSON file that defines policies. (string value)
+#policy_file=policy.json
+
+# Default rule. Enforced when a requested rule is not found.
+# (string value)
+#policy_default_rule=default
+
+
+[assignment]
+
+#
+# Options defined in keystone
+#
+
+# Assignment backend driver. (string value)
+#driver=<None>
+
+# Toggle for assignment caching. This has no effect unless
+# global caching is enabled. (boolean value)
+#caching=true
+
+# TTL (in seconds) to cache assignment data. This has no
+# effect unless global caching is enabled. (integer value)
+#cache_time=<None>
+
+# Maximum number of entities that will be returned in an
+# assignment collection. (integer value)
+#list_limit=<None>
+
+
+[auth]
+
+#
+# Options defined in keystone
+#
+
+# Default auth methods. (list value)
+#methods=external,password,token
+
+# The password auth plugin module. (string value)
+#password=keystone.auth.plugins.password.Password
+
+# The token auth plugin module. (string value)
+#token=keystone.auth.plugins.token.Token
+
+# The external (REMOTE_USER) auth plugin module. (string
+# value)
+#external=keystone.auth.plugins.external.DefaultDomain
+
+
+[cache]
+
+#
+# Options defined in keystone
+#
+
+# Prefix for building the configuration dictionary for the
+# cache region. This should not need to be changed unless
+# there is another dogpile.cache region with the same
+# configuration name. (string value)
+#config_prefix=cache.keystone
+
+# Default TTL, in seconds, for any cached item in the
+# dogpile.cache region. This applies to any cached method that
+# doesn't have an explicit cache expiration time defined for
+# it. (integer value)
+#expiration_time=600
+
+# Dogpile.cache backend module. It is recommended that
+# Memcache with pooling (keystone.cache.memcache_pool) or
+# Redis (dogpile.cache.redis) be used in production
+# deployments.  Small workloads (single process) like devstack
+# can use the dogpile.cache.memory backend. (string value)
+#backend=keystone.common.cache.noop
+backend=keystone.cache.memcache_pool
+
+# Arguments supplied to the backend module. Specify this
+# option once per argument to be passed to the dogpile.cache
+# backend. Example format: "<argname>:<value>". (multi valued)
+#backend_argument=
+
+# Proxy classes to import that will affect the way the
+# dogpile.cache backend functions. See the dogpile.cache
+# documentation on changing-backend-behavior. (list value)
+#proxies=
+
+# Global toggle for all caching using the should_cache_fn
+# mechanism. (boolean value)
+#enabled=false
+enabled=True
+
+# Extra debugging from the cache backend (cache keys,
+# get/set/delete/etc calls). This is only really useful if you
+# need to see the specific cache-backend get/set/delete calls
+# with the keys/values.  Typically this should be left set to
+# false. (boolean value)
+#debug_cache_backend=false
+
+# Memcache servers in the format of "host:port".
+# (dogpile.cache.memcache and keystone.cache.memcache_pool
+# backends only) (list value)
+#memcache_servers=localhost:11211
+#memcache_servers=192.168.0.4:11211,192.168.0.5:11211,192.168.0.6:11211
+
+{%- if server.cache is defined %}
+{%- if server.cache.members is defined %}
+memcache_servers = {%- for member in server.cache.members %}{{ member.host }}:{{ member.port }}{% if not loop.last %},{% endif %}{%- endfor %}
+{%- else %}
+memcache_servers = ['{{ server.cache.host }}:{{ server.cache.port }}']
+{%- endif %}
+{%- endif %}
+
+
+# Number of seconds memcached server is considered dead before
+# it is tried again. (dogpile.cache.memcache and
+# keystone.cache.memcache_pool backends only) (integer value)
+#memcache_dead_retry=300
+memcache_dead_retry=300
+
+# Timeout in seconds for every call to a server.
+# (dogpile.cache.memcache and keystone.cache.memcache_pool
+# backends only) (integer value)
+#memcache_socket_timeout=3
+memcache_socket_timeout=1
+
+# Max total number of open connections to every memcached
+# server. (keystone.cache.memcache_pool backend only) (integer
+# value)
+#memcache_pool_maxsize=10
+memcache_pool_maxsize=100
+
+# Number of seconds a connection to memcached is held unused
+# in the pool before it is closed.
+# (keystone.cache.memcache_pool backend only) (integer value)
+#memcache_pool_unused_timeout=60
+memcache_pool_unused_timeout=60
+
+# Number of seconds that an operation will wait to get a
+# memcache client connection. (integer value)
+#memcache_pool_connection_get_timeout=10
+
+
+[catalog]
+
+#
+# Options defined in keystone
+#
+
+# Catalog template file name for use with the template catalog
+# backend. (string value)
+#template_file=default_catalog.templates
+template_file=/etc/keystone/default_catalog.templates
+
+# Catalog backend driver. (string value)
+#driver=keystone.catalog.backends.sql.Catalog
+driver=keystone.catalog.backends.sql.Catalog
+
+# Toggle for catalog caching. This has no effect unless global
+# caching is enabled. (boolean value)
+#caching=true
+
+# Time to cache catalog data (in seconds). This has no effect
+# unless global and catalog caching are enabled. (integer
+# value)
+#cache_time=<None>
+
+# Maximum number of entities that will be returned in a
+# catalog collection. (integer value)
+#list_limit=<None>
+
+# (Deprecated) List of possible substitutions for use in
+# formatting endpoints. Use caution when modifying this list.
+# It will give users with permission to create endpoints the
+# ability to see those values in your configuration file. This
+# option will be removed in Juno. (list value)
+#endpoint_substitution_whitelist=tenant_id,user_id,public_bind_host,admin_bind_host,compute_host,compute_port,admin_port,public_port,public_endpoint,admin_endpoint
+
+
+[credential]
+
+#
+# Options defined in keystone
+#
+
+# Credential backend driver. (string value)
+#driver=keystone.credential.backends.sql.Credential
+
+
+[database]
+
+#
+# Options defined in oslo.db
+#
+
+# The file name to use with SQLite. (string value)
+#sqlite_db=oslo.sqlite
+
+# If True, SQLite uses synchronous mode. (boolean value)
+#sqlite_synchronous=true
+
+# The back end to use for the database. (string value)
+# Deprecated group/name - [DEFAULT]/db_backend
+#backend=sqlalchemy
+
+# The SQLAlchemy connection string to use to connect to the
+# database. (string value)
+# Deprecated group/name - [DEFAULT]/sql_connection
+# Deprecated group/name - [DATABASE]/sql_connection
+# Deprecated group/name - [sql]/connection
+#connection=<None>
+#connection=mysql://keystone:aPWE6zu4@192.168.0.2/keystone?read_timeout=60
+connection={{ server.database.engine }}://{{ server.database.user }}:{{ server.database.password }}@{{ server.database.host }}/{{ server.database.name }}
+
+# The SQLAlchemy connection string to use to connect to the
+# slave database. (string value)
+#slave_connection=<None>
+
+# The SQL mode to be used for MySQL sessions. This option,
+# including the default, overrides any server-set SQL mode. To
+# use whatever SQL mode is set by the server configuration,
+# set this to no value. Example: mysql_sql_mode= (string
+# value)
+#mysql_sql_mode=TRADITIONAL
+
+# Timeout before idle SQL connections are reaped. (integer
+# value)
+# Deprecated group/name - [DEFAULT]/sql_idle_timeout
+# Deprecated group/name - [DATABASE]/sql_idle_timeout
+# Deprecated group/name - [sql]/idle_timeout
+#idle_timeout=3600
+idle_timeout=3600
+
+# Minimum number of SQL connections to keep open in a pool.
+# (integer value)
+# Deprecated group/name - [DEFAULT]/sql_min_pool_size
+# Deprecated group/name - [DATABASE]/sql_min_pool_size
+#min_pool_size=1
+
+# Maximum number of SQL connections to keep open in a pool.
+# (integer value)
+# Deprecated group/name - [DEFAULT]/sql_max_pool_size
+# Deprecated group/name - [DATABASE]/sql_max_pool_size
+#max_pool_size=<None>
+
+# Maximum db connection retries during startup. Set to -1 to
+# specify an infinite retry count. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_max_retries
+# Deprecated group/name - [DATABASE]/sql_max_retries
+#max_retries=10
+
+# Interval between retries of opening a SQL connection.
+# (integer value)
+# Deprecated group/name - [DEFAULT]/sql_retry_interval
+# Deprecated group/name - [DATABASE]/reconnect_interval
+#retry_interval=10
+
+# If set, use this value for max_overflow with SQLAlchemy.
+# (integer value)
+# Deprecated group/name - [DEFAULT]/sql_max_overflow
+# Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
+#max_overflow=<None>
+
+# Verbosity of SQL debugging information: 0=None,
+# 100=Everything. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_connection_debug
+#connection_debug=0
+
+# Add Python stack traces to SQL as comment strings. (boolean
+# value)
+# Deprecated group/name - [DEFAULT]/sql_connection_trace
+#connection_trace=false
+
+# If set, use this value for pool_timeout with SQLAlchemy.
+# (integer value)
+# Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
+#pool_timeout=<None>
+
+# Enable the experimental use of database reconnect on
+# connection lost. (boolean value)
+#use_db_reconnect=false
+
+# Seconds between database connection retries. (integer value)
+#db_retry_interval=1
+
+# If True, increases the interval between database connection
+# retries up to db_max_retry_interval. (boolean value)
+#db_inc_retry_interval=true
+
+# If db_inc_retry_interval is set, the maximum seconds between
+# database connection retries. (integer value)
+#db_max_retry_interval=10
+
+# Maximum database connection retries before error is raised.
+# Set to -1 to specify an infinite retry count. (integer
+# value)
+#db_max_retries=20
+
+
+[ec2]
+
+#
+# Options defined in keystone
+#
+
+# EC2Credential backend driver. (string value)
+#driver=keystone.contrib.ec2.backends.kvs.Ec2
+driver=keystone.contrib.ec2.backends.sql.Ec2
+
+
+[endpoint_filter]
+
+#
+# Options defined in keystone
+#
+
+# Endpoint Filter backend driver (string value)
+#driver=keystone.contrib.endpoint_filter.backends.sql.EndpointFilter
+
+# Toggle to return all active endpoints if no filter exists.
+# (boolean value)
+#return_all_endpoints_if_no_filter=true
+
+
+[endpoint_policy]
+
+#
+# Options defined in keystone
+#
+
+# Endpoint policy backend driver (string value)
+#driver=keystone.contrib.endpoint_policy.backends.sql.EndpointPolicy
+
+
+[federation]
+
+#
+# Options defined in keystone
+#
+
+# Federation backend driver. (string value)
+#driver=keystone.contrib.federation.backends.sql.Federation
+
+# Value to be used when filtering assertion parameters from
+# the environment. (string value)
+#assertion_prefix=
+
+
+[identity]
+
+#
+# Options defined in keystone
+#
+
+# This references the domain to use for all Identity API v2
+# requests (which are not aware of domains). A domain with
+# this ID will be created for you by keystone-manage db_sync
+# in migration 008. The domain referenced by this ID cannot be
+# deleted on the v3 API, to prevent accidentally breaking the
+# v2 API. There is nothing special about this domain, other
+# than the fact that it must exist to order to maintain
+# support for your v2 clients. (string value)
+#default_domain_id=default
+
+# A subset (or all) of domains can have their own identity
+# driver, each with their own partial configuration file in a
+# domain configuration directory. Only values specific to the
+# domain need to be placed in the domain specific
+# configuration file. This feature is disabled by default; set
+# to true to enable. (boolean value)
+#domain_specific_drivers_enabled=false
+
+# Path for Keystone to locate the domain specific identity
+# configuration files if domain_specific_drivers_enabled is
+# set to true. (string value)
+#domain_config_dir=/etc/keystone/domains
+
+# Identity backend driver. (string value)
+#driver=keystone.identity.backends.sql.Identity
+driver=keystone.identity.backends.sql.Identity
+
+# Maximum supported length for user passwords; decrease to
+# improve performance. (integer value)
+#max_password_length=4096
+
+# Maximum number of entities that will be returned in an
+# identity collection. (integer value)
+#list_limit=<None>
+
+
+[identity_mapping]
+
+#
+# Options defined in keystone
+#
+
+# Keystone Identity Mapping backend driver. (string value)
+#driver=keystone.identity.mapping_backends.sql.Mapping
+
+# Public ID generator for user and group entities. The
+# Keystone identity mapper only supports generators that
+# produce no more than 64 characters. (string value)
+#generator=keystone.identity.id_generators.sha256.Generator
+
+# The format of user and group IDs changed in Juno for
+# backends that do not generate UUIDs (e.g. LDAP), with
+# keystone providing a hash mapping to the underlying
+# attribute in LDAP. By default this mapping is disabled,
+# which ensures that existing IDs will not change. Even when
+# the mapping is enabled by using domain specific drivers, any
+# users and groups from the default domain being handled by
+# LDAP will still not be mapped to ensure their IDs remain
+# backward compatible. Setting this value to False will enable
+# the mapping for even the default LDAP driver. It is only
+# safe to do this if you do not already have assignments for
+# users and groups from the default LDAP domain, and it is
+# acceptable for Keystone to provide the different IDs to
+# clients than it did previously.  Typically this means that
+# the only time you can set this value to False is when
+# configuring a fresh installation. (boolean value)
+#backward_compatible_ids=true
+
+
+[kvs]
+
+#
+# Options defined in keystone
+#
+
+# Extra dogpile.cache backend modules to register with the
+# dogpile.cache library. (list value)
+#backends=
+
+# Prefix for building the configuration dictionary for the KVS
+# region. This should not need to be changed unless there is
+# another dogpile.cache region with the same configuration
+# name. (string value)
+#config_prefix=keystone.kvs
+
+# Toggle to disable using a key-mangling function to ensure
+# fixed length keys. This is toggle-able for debugging
+# purposes, it is highly recommended to always leave this set
+# to true. (boolean value)
+#enable_key_mangler=true
+
+# Default lock timeout for distributed locking. (integer
+# value)
+#default_lock_timeout=5
+
+
+[ldap]
+
+#
+# Options defined in keystone
+#
+
+# URL for connecting to the LDAP server. (string value)
+#url=ldap://localhost
+
+# User BindDN to query the LDAP server. (string value)
+#user=<None>
+
+# Password for the BindDN to query the LDAP server. (string
+# value)
+#password=<None>
+
+# LDAP server suffix (string value)
+#suffix=cn=example,cn=com
+
+# If true, will add a dummy member to groups. This is required
+# if the objectclass for groups requires the "member"
+# attribute. (boolean value)
+#use_dumb_member=false
+
+# DN of the "dummy member" to use when "use_dumb_member" is
+# enabled. (string value)
+#dumb_member=cn=dumb,dc=nonexistent
+
+# Delete subtrees using the subtree delete control. Only
+# enable this option if your LDAP server supports subtree
+# deletion. (boolean value)
+#allow_subtree_delete=false
+
+# The LDAP scope for queries, this can be either "one"
+# (onelevel/singleLevel) or "sub" (subtree/wholeSubtree).
+# (string value)
+#query_scope=one
+
+# Maximum results per page; a value of zero ("0") disables
+# paging. (integer value)
+#page_size=0
+
+# The LDAP dereferencing option for queries. This can be
+# either "never", "searching", "always", "finding" or
+# "default". The "default" option falls back to using default
+# dereferencing configured by your ldap.conf. (string value)
+#alias_dereferencing=default
+
+# Sets the LDAP debugging level for LDAP calls. A value of 0
+# means that debugging is not enabled. This value is a
+# bitmask, consult your LDAP documentation for possible
+# values. (integer value)
+#debug_level=<None>
+
+# Override the system's default referral chasing behavior for
+# queries. (boolean value)
+#chase_referrals=<None>
+
+# Search base for users. (string value)
+#user_tree_dn=<None>
+
+# LDAP search filter for users. (string value)
+#user_filter=<None>
+
+# LDAP objectclass for users. (string value)
+#user_objectclass=inetOrgPerson
+
+# LDAP attribute mapped to user id. WARNING: must not be a
+# multivalued attribute. (string value)
+#user_id_attribute=cn
+
+# LDAP attribute mapped to user name. (string value)
+#user_name_attribute=sn
+
+# LDAP attribute mapped to user email. (string value)
+#user_mail_attribute=mail
+
+# LDAP attribute mapped to password. (string value)
+#user_pass_attribute=userPassword
+
+# LDAP attribute mapped to user enabled flag. (string value)
+#user_enabled_attribute=enabled
+
+# Invert the meaning of the boolean enabled values. Some LDAP
+# servers use a boolean lock attribute where "true" means an
+# account is disabled. Setting "user_enabled_invert = true"
+# will allow these lock attributes to be used. This setting
+# will have no effect if "user_enabled_mask" or
+# "user_enabled_emulation" settings are in use. (boolean
+# value)
+#user_enabled_invert=false
+
+# Bitmask integer to indicate the bit that the enabled value
+# is stored in if the LDAP server represents "enabled" as a
+# bit on an integer rather than a boolean. A value of "0"
+# indicates the mask is not used. If this is not set to "0"
+# the typical value is "2". This is typically used when
+# "user_enabled_attribute = userAccountControl". (integer
+# value)
+#user_enabled_mask=0
+
+# Default value to enable users. This should match an
+# appropriate int value if the LDAP server uses non-boolean
+# (bitmask) values to indicate if a user is enabled or
+# disabled. If this is not set to "True" the typical value is
+# "512". This is typically used when "user_enabled_attribute =
+# userAccountControl". (string value)
+#user_enabled_default=True
+
+# List of attributes stripped off the user on update. (list
+# value)
+#user_attribute_ignore=default_project_id,tenants
+
+# LDAP attribute mapped to default_project_id for users.
+# (string value)
+#user_default_project_id_attribute=<None>
+
+# Allow user creation in LDAP backend. (boolean value)
+#user_allow_create=true
+
+# Allow user updates in LDAP backend. (boolean value)
+#user_allow_update=true
+
+# Allow user deletion in LDAP backend. (boolean value)
+#user_allow_delete=true
+
+# If true, Keystone uses an alternative method to determine if
+# a user is enabled or not by checking if they are a member of
+# the "user_enabled_emulation_dn" group. (boolean value)
+#user_enabled_emulation=false
+
+# DN of the group entry to hold enabled users when using
+# enabled emulation. (string value)
+#user_enabled_emulation_dn=<None>
+
+# List of additional LDAP attributes used for mapping
+# additional attribute mappings for users. Attribute mapping
+# format is <ldap_attr>:<user_attr>, where ldap_attr is the
+# attribute in the LDAP entry and user_attr is the Identity
+# API attribute. (list value)
+#user_additional_attribute_mapping=
+
+# Search base for projects (string value)
+# Deprecated group/name - [ldap]/tenant_tree_dn
+#project_tree_dn=<None>
+
+# LDAP search filter for projects. (string value)
+# Deprecated group/name - [ldap]/tenant_filter
+#project_filter=<None>
+
+# LDAP objectclass for projects. (string value)
+# Deprecated group/name - [ldap]/tenant_objectclass
+#project_objectclass=groupOfNames
+
+# LDAP attribute mapped to project id. (string value)
+# Deprecated group/name - [ldap]/tenant_id_attribute
+#project_id_attribute=cn
+
+# LDAP attribute mapped to project membership for user.
+# (string value)
+# Deprecated group/name - [ldap]/tenant_member_attribute
+#project_member_attribute=member
+
+# LDAP attribute mapped to project name. (string value)
+# Deprecated group/name - [ldap]/tenant_name_attribute
+#project_name_attribute=ou
+
+# LDAP attribute mapped to project description. (string value)
+# Deprecated group/name - [ldap]/tenant_desc_attribute
+#project_desc_attribute=description
+
+# LDAP attribute mapped to project enabled. (string value)
+# Deprecated group/name - [ldap]/tenant_enabled_attribute
+#project_enabled_attribute=enabled
+
+# LDAP attribute mapped to project domain_id. (string value)
+# Deprecated group/name - [ldap]/tenant_domain_id_attribute
+#project_domain_id_attribute=businessCategory
+
+# List of attributes stripped off the project on update. (list
+# value)
+# Deprecated group/name - [ldap]/tenant_attribute_ignore
+#project_attribute_ignore=
+
+# Allow project creation in LDAP backend. (boolean value)
+# Deprecated group/name - [ldap]/tenant_allow_create
+#project_allow_create=true
+
+# Allow project update in LDAP backend. (boolean value)
+# Deprecated group/name - [ldap]/tenant_allow_update
+#project_allow_update=true
+
+# Allow project deletion in LDAP backend. (boolean value)
+# Deprecated group/name - [ldap]/tenant_allow_delete
+#project_allow_delete=true
+
+# If true, Keystone uses an alternative method to determine if
+# a project is enabled or not by checking if they are a member
+# of the "project_enabled_emulation_dn" group. (boolean value)
+# Deprecated group/name - [ldap]/tenant_enabled_emulation
+#project_enabled_emulation=false
+
+# DN of the group entry to hold enabled projects when using
+# enabled emulation. (string value)
+# Deprecated group/name - [ldap]/tenant_enabled_emulation_dn
+#project_enabled_emulation_dn=<None>
+
+# Additional attribute mappings for projects. Attribute
+# mapping format is <ldap_attr>:<user_attr>, where ldap_attr
+# is the attribute in the LDAP entry and user_attr is the
+# Identity API attribute. (list value)
+# Deprecated group/name - [ldap]/tenant_additional_attribute_mapping
+#project_additional_attribute_mapping=
+
+# Search base for roles. (string value)
+#role_tree_dn=<None>
+
+# LDAP search filter for roles. (string value)
+#role_filter=<None>
+
+# LDAP objectclass for roles. (string value)
+#role_objectclass=organizationalRole
+
+# LDAP attribute mapped to role id. (string value)
+#role_id_attribute=cn
+
+# LDAP attribute mapped to role name. (string value)
+#role_name_attribute=ou
+
+# LDAP attribute mapped to role membership. (string value)
+#role_member_attribute=roleOccupant
+
+# List of attributes stripped off the role on update. (list
+# value)
+#role_attribute_ignore=
+
+# Allow role creation in LDAP backend. (boolean value)
+#role_allow_create=true
+
+# Allow role update in LDAP backend. (boolean value)
+#role_allow_update=true
+
+# Allow role deletion in LDAP backend. (boolean value)
+#role_allow_delete=true
+
+# Additional attribute mappings for roles. Attribute mapping
+# format is <ldap_attr>:<user_attr>, where ldap_attr is the
+# attribute in the LDAP entry and user_attr is the Identity
+# API attribute. (list value)
+#role_additional_attribute_mapping=
+
+# Search base for groups. (string value)
+#group_tree_dn=<None>
+
+# LDAP search filter for groups. (string value)
+#group_filter=<None>
+
+# LDAP objectclass for groups. (string value)
+#group_objectclass=groupOfNames
+
+# LDAP attribute mapped to group id. (string value)
+#group_id_attribute=cn
+
+# LDAP attribute mapped to group name. (string value)
+#group_name_attribute=ou
+
+# LDAP attribute mapped to show group membership. (string
+# value)
+#group_member_attribute=member
+
+# LDAP attribute mapped to group description. (string value)
+#group_desc_attribute=description
+
+# List of attributes stripped off the group on update. (list
+# value)
+#group_attribute_ignore=
+
+# Allow group creation in LDAP backend. (boolean value)
+#group_allow_create=true
+
+# Allow group update in LDAP backend. (boolean value)
+#group_allow_update=true
+
+# Allow group deletion in LDAP backend. (boolean value)
+#group_allow_delete=true
+
+# Additional attribute mappings for groups. Attribute mapping
+# format is <ldap_attr>:<user_attr>, where ldap_attr is the
+# attribute in the LDAP entry and user_attr is the Identity
+# API attribute. (list value)
+#group_additional_attribute_mapping=
+
+# CA certificate file path for communicating with LDAP
+# servers. (string value)
+#tls_cacertfile=<None>
+
+# CA certificate directory path for communicating with LDAP
+# servers. (string value)
+#tls_cacertdir=<None>
+
+# Enable TLS for communicating with LDAP servers. (boolean
+# value)
+#use_tls=false
+
+# Valid options for tls_req_cert are demand, never, and allow.
+# (string value)
+#tls_req_cert=demand
+
+# Enable LDAP connection pooling. (boolean value)
+#use_pool=false
+
+# Connection pool size. (integer value)
+#pool_size=10
+
+# Maximum count of reconnect trials. (integer value)
+#pool_retry_max=3
+
+# Time span in seconds to wait between two reconnect trials.
+# (floating point value)
+#pool_retry_delay=0.1
+
+# Connector timeout in seconds. Value -1 indicates indefinite
+# wait for response. (integer value)
+#pool_connection_timeout=-1
+
+# Connection lifetime in seconds. (integer value)
+#pool_connection_lifetime=600
+
+# Enable LDAP connection pooling for end user authentication.
+# If use_pool is disabled, then this setting is meaningless
+# and is not used at all. (boolean value)
+#use_auth_pool=false
+
+# End user auth connection pool size. (integer value)
+#auth_pool_size=100
+
+# End user auth connection lifetime in seconds. (integer
+# value)
+#auth_pool_connection_lifetime=60
+
+
+[matchmaker_redis]
+
+#
+# Options defined in oslo.messaging
+#
+
+# Host to locate redis. (string value)
+#host=127.0.0.1
+
+# Use this port to connect to redis host. (integer value)
+#port=6379
+
+# Password for Redis server (optional). (string value)
+#password=<None>
+
+
+[matchmaker_ring]
+
+#
+# Options defined in oslo.messaging
+#
+
+# Matchmaker ring file (JSON). (string value)
+# Deprecated group/name - [DEFAULT]/matchmaker_ringfile
+#ringfile=/etc/oslo/matchmaker_ring.json
+
+
+[memcache]
+
+#
+# Options defined in keystone
+#
+
+# Memcache servers in the format of "host:port". (list value)
+#servers=localhost:11211
+{%- if server.cache is defined %}
+{%- if server.cache.members is defined %}
+servers = {%- for member in server.cache.members %}{{ member.host }}:{{ member.port }}{% if not loop.last %},{% endif %}{%- endfor %}
+{%- else %}
+servers = ['{{ server.cache.host }}:{{ server.cache.port }}']
+{%- endif %}
+{%- endif %}
+
+# Number of seconds memcached server is considered dead before
+# it is tried again. This is used by the key value store
+# system (e.g. token pooled memcached persistence backend).
+# (integer value)
+#dead_retry=300
+
+# Timeout in seconds for every call to a server. This is used
+# by the key value store system (e.g. token pooled memcached
+# persistence backend). (integer value)
+#socket_timeout=3
+
+# Max total number of open connections to every memcached
+# server. This is used by the key value store system (e.g.
+# token pooled memcached persistence backend). (integer value)
+#pool_maxsize=10
+
+# Number of seconds a connection to memcached is held unused
+# in the pool before it is closed. This is used by the key
+# value store system (e.g. token pooled memcached persistence
+# backend). (integer value)
+#pool_unused_timeout=60
+
+# Number of seconds that an operation will wait to get a
+# memcache client connection. This is used by the key value
+# store system (e.g. token pooled memcached persistence
+# backend). (integer value)
+#pool_connection_get_timeout=10
+
+
+[oauth1]
+
+#
+# Options defined in keystone
+#
+
+# Credential backend driver. (string value)
+#driver=keystone.contrib.oauth1.backends.sql.OAuth1
+
+# Duration (in seconds) for the OAuth Request Token. (integer
+# value)
+#request_token_duration=28800
+
+# Duration (in seconds) for the OAuth Access Token. (integer
+# value)
+#access_token_duration=86400
+
+
+[os_inherit]
+
+#
+# Options defined in keystone
+#
+
+# role-assignment inheritance to projects from owning domain
+# can be optionally enabled. (boolean value)
+#enabled=false
+
+
+[paste_deploy]
+
+#
+# Options defined in keystone
+#
+
+# Name of the paste configuration file that defines the
+# available pipelines. (string value)
+#config_file=keystone-paste.ini
+
+
+[policy]
+
+#
+# Options defined in keystone
+#
+
+# Policy backend driver. (string value)
+#driver=keystone.policy.backends.sql.Policy
+driver=keystone.policy.backends.rules.Policy
+
+# Maximum number of entities that will be returned in a policy
+# collection. (integer value)
+#list_limit=<None>
+
+
+[revoke]
+
+#
+# Options defined in keystone
+#
+
+# An implementation of the backend for persisting revocation
+# events. (string value)
+#driver=keystone.contrib.revoke.backends.kvs.Revoke
+
+# This value (calculated in seconds) is added to token
+# expiration before a revocation event may be removed from the
+# backend. (integer value)
+#expiration_buffer=1800
+
+# Toggle for revocation event caching. This has no effect
+# unless global caching is enabled. (boolean value)
+#caching=true
+
+
+[saml]
+
+#
+# Options defined in keystone
+#
+
+# Default TTL, in seconds, for any generated SAML assertion
+# created by Keystone. (integer value)
+#assertion_expiration_time=3600
+
+# Binary to be called for XML signing. Install the appropriate
+# package, specify absolute path or adjust your PATH
+# environment variable if the binary cannot be found. (string
+# value)
+#xmlsec1_binary=xmlsec1
+
+# Path of the certfile for SAML signing. For non-production
+# environments, you may be interested in using `keystone-
+# manage pki_setup` to generate self-signed certificates.
+# Note, the path cannot contain a comma. (string value)
+#certfile=/etc/keystone/ssl/certs/signing_cert.pem
+
+# Path of the keyfile for SAML signing. Note, the path cannot
+# contain a comma. (string value)
+#keyfile=/etc/keystone/ssl/private/signing_key.pem
+
+# Entity ID value for unique Identity Provider identification.
+# Usually FQDN is set with a suffix. A value is required to
+# generate IDP Metadata. For example:
+# https://keystone.example.com/v3/OS-FEDERATION/saml2/idp
+# (string value)
+#idp_entity_id=<None>
+
+# Identity Provider Single-Sign-On service value, required in
+# the Identity Provider's metadata. A value is required to
+# generate IDP Metadata. For example:
+# https://keystone.example.com/v3/OS-FEDERATION/saml2/sso
+# (string value)
+#idp_sso_endpoint=<None>
+
+# Language used by the organization. (string value)
+#idp_lang=en
+
+# Organization name the installation belongs to. (string
+# value)
+#idp_organization_name=<None>
+
+# Organization name to be displayed. (string value)
+#idp_organization_display_name=<None>
+
+# URL of the organization. (string value)
+#idp_organization_url=<None>
+
+# Company of contact person. (string value)
+#idp_contact_company=<None>
+
+# Given name of contact person (string value)
+#idp_contact_name=<None>
+
+# Surname of contact person. (string value)
+#idp_contact_surname=<None>
+
+# Email address of contact person. (string value)
+#idp_contact_email=<None>
+
+# Telephone number of contact person. (string value)
+#idp_contact_telephone=<None>
+
+# Contact type. Allowed values are: technical, support,
+# administrative billing, and other (string value)
+#idp_contact_type=other
+
+# Path to the Identity Provider Metadata file. This file
+# should be generated with the keystone-manage
+# saml_idp_metadata command. (string value)
+#idp_metadata_path=/etc/keystone/saml2_idp_metadata.xml
+
+
+[signing]
+
+#
+# Options defined in keystone
+#
+
+# Deprecated in favor of provider in the [token] section.
+# (string value)
+#token_format=<None>
+
+# Path of the certfile for token signing. For non-production
+# environments, you may be interested in using `keystone-
+# manage pki_setup` to generate self-signed certificates.
+# (string value)
+#certfile=/etc/keystone/ssl/certs/signing_cert.pem
+
+# Path of the keyfile for token signing. (string value)
+#keyfile=/etc/keystone/ssl/private/signing_key.pem
+
+# Path of the CA for token signing. (string value)
+#ca_certs=/etc/keystone/ssl/certs/ca.pem
+
+# Path of the CA key for token signing. (string value)
+#ca_key=/etc/keystone/ssl/private/cakey.pem
+
+# Key size (in bits) for token signing cert (auto generated
+# certificate). (integer value)
+#key_size=2048
+
+# Days the token signing cert is valid for (auto generated
+# certificate). (integer value)
+#valid_days=3650
+
+# Certificate subject (auto generated certificate) for token
+# signing. (string value)
+#cert_subject=/C=US/ST=Unset/L=Unset/O=Unset/CN=www.example.com
+
+
+[ssl]
+
+#
+# Options defined in keystone
+#
+
+# Toggle for SSL support on the Keystone eventlet servers.
+# (boolean value)
+#enable=false
+enable=False
+
+# Path of the certfile for SSL. For non-production
+# environments, you may be interested in using `keystone-
+# manage ssl_setup` to generate self-signed certificates.
+# (string value)
+#certfile=/etc/keystone/ssl/certs/keystone.pem
+
+# Path of the keyfile for SSL. (string value)
+#keyfile=/etc/keystone/ssl/private/keystonekey.pem
+
+# Path of the ca cert file for SSL. (string value)
+#ca_certs=/etc/keystone/ssl/certs/ca.pem
+
+# Path of the CA key file for SSL. (string value)
+#ca_key=/etc/keystone/ssl/private/cakey.pem
+
+# Require client certificate. (boolean value)
+#cert_required=false
+
+# SSL key length (in bits) (auto generated certificate).
+# (integer value)
+#key_size=1024
+
+# Days the certificate is valid for once signed (auto
+# generated certificate). (integer value)
+#valid_days=3650
+
+# SSL certificate subject (auto generated certificate).
+# (string value)
+#cert_subject=/C=US/ST=Unset/L=Unset/O=Unset/CN=localhost
+
+
+[stats]
+
+#
+# Options defined in keystone
+#
+
+# Stats backend driver. (string value)
+#driver=keystone.contrib.stats.backends.kvs.Stats
+
+
+[token]
+
+#
+# Options defined in keystone
+#
+
+# External auth mechanisms that should add bind information to
+# token, e.g., kerberos,x509. (list value)
+#bind=
+
+# Enforcement policy on tokens presented to Keystone with bind
+# information. One of disabled, permissive, strict, required
+# or a specifically required bind mode, e.g., kerberos or x509
+# to require binding to that authentication. (string value)
+#enforce_token_bind=permissive
+
+# Amount of time a token should remain valid (in seconds).
+# (integer value)
+#expiration=3600
+expiration=43200
+
+# Controls the token construction, validation, and revocation
+# operations. Core providers are
+# "keystone.token.providers.[pkiz|pki|uuid].Provider". The
+# default provider is uuid. (string value)
+#provider=<None>
+provider=keystone.token.providers.uuid.Provider
+
+# Token persistence backend driver. (string value)
+#driver=keystone.token.persistence.backends.sql.Token
+driver=keystone.token.persistence.backends.memcache_pool.Token
+
+# Toggle for token system caching. This has no effect unless
+# global caching is enabled. (boolean value)
+#caching=true
+caching=False
+
+# Time to cache the revocation list and the revocation events
+# if revoke extension is enabled (in seconds). This has no
+# effect unless global and token caching are enabled. (integer
+# value)
+#revocation_cache_time=3600
+
+# Time to cache tokens (in seconds). This has no effect unless
+# global and token caching are enabled. (integer value)
+#cache_time=<None>
+
+# Revoke token by token identifier. Setting revoke_by_id to
+# true enables various forms of enumerating tokens, e.g. `list
+# tokens for user`. These enumerations are processed to
+# determine the list of tokens to revoke. Only disable if you
+# are switching to using the Revoke extension with a backend
+# other than KVS, which stores events in memory. (boolean
+# value)
+#revoke_by_id=true
+
+# The hash algorithm to use for PKI tokens. This can be set to
+# any algorithm that hashlib supports. WARNING: Before
+# changing this value, the auth_token middleware must be
+# configured with the hash_algorithms, otherwise token
+# revocation will not be processed correctly. (string value)
+#hash_algorithm=md5
+
+
+[trust]
+
+#
+# Options defined in keystone
+#
+
+# Delegation and impersonation features can be optionally
+# disabled. (boolean value)
+#enabled=true
+
+# Trust backend driver. (string value)
+#driver=keystone.trust.backends.sql.Trust
+
+
+
+[app:admin_version_service]
+paste.app_factory=keystone.service:admin_version_app_factory
+
+[pipeline:public_version_api]
+pipeline=stats_monitoring url_normalize xml_body public_version_service
+
+[filter:user_crud_extension]
+paste.filter_factory=keystone.contrib.user_crud:CrudExtension.factory
+
+[composite:main]
+/=public_version_api
+/v2.0=public_api
+use=egg:Paste#urlmap
+
+[filter:stats_monitoring]
+paste.filter_factory=keystone.contrib.stats:StatsMiddleware.factory
+
+[filter:ec2_extension]
+paste.filter_factory=keystone.contrib.ec2:Ec2Extension.factory
+
+[filter:debug]
+paste.filter_factory=keystone.common.wsgi:Debug.factory
+
+[filter:crud_extension]
+paste.filter_factory=keystone.contrib.admin_crud:CrudExtension.factory
+
+[filter:xml_body]
+paste.filter_factory=keystone.middleware:XmlBodyMiddleware.factory
+
+[pipeline:public_api]
+pipeline=stats_monitoring url_normalize token_auth admin_token_auth xml_body json_body debug ec2_extension user_crud_extension public_service
+
+[pipeline:admin_version_api]
+pipeline=stats_monitoring url_normalize xml_body admin_version_service
+
+[filter:stats_reporting]
+paste.filter_factory=keystone.contrib.stats:StatsExtension.factory
+
+[filter:s3_extension]
+paste.filter_factory=keystone.contrib.s3:S3Extension.factory
+
+[DATABASE]
+max_pool_size=10
+max_overflow=30
+max_retries=-1
+
+[filter:url_normalize]
+paste.filter_factory=keystone.middleware:NormalizingFilter.factory
+
+[filter:token_auth]
+paste.filter_factory=keystone.middleware:TokenAuthMiddleware.factory
+
+[filter:json_body]
+paste.filter_factory=keystone.middleware:JsonBodyMiddleware.factory
+
+[composite:admin]
+/=admin_version_api
+use=egg:Paste#urlmap
+/v2.0=admin_api
+
+[filter:admin_token_auth]
+paste.filter_factory=keystone.middleware:AdminTokenAuthMiddleware.factory
+
+[pipeline:admin_api]
+pipeline=stats_monitoring url_normalize token_auth admin_token_auth xml_body json_body debug stats_reporting ec2_extension s3_extension crud_extension admin_service
+
+[app:public_service]
+paste.app_factory=keystone.service:public_app_factory
+
+[app:admin_service]
+paste.app_factory=keystone.service:admin_app_factory
+
+[app:public_version_service]
+paste.app_factory=keystone.service:public_version_app_factory
diff --git a/keystone/files/juno/policy-v2.json b/keystone/files/juno/policy-v2.json
new file mode 100644
index 0000000..af65205
--- /dev/null
+++ b/keystone/files/juno/policy-v2.json
@@ -0,0 +1,171 @@
+{
+    "admin_required": "role:admin or is_admin:1",
+    "service_role": "role:service",
+    "service_or_admin": "rule:admin_required or rule:service_role",
+    "owner" : "user_id:%(user_id)s",
+    "admin_or_owner": "rule:admin_required or rule:owner",
+
+    "default": "rule:admin_required",
+
+    "identity:get_region": "",
+    "identity:list_regions": "",
+    "identity:create_region": "rule:admin_required",
+    "identity:update_region": "rule:admin_required",
+    "identity:delete_region": "rule:admin_required",
+
+    "identity:get_service": "rule:admin_required",
+    "identity:list_services": "rule:admin_required",
+    "identity:create_service": "rule:admin_required",
+    "identity:update_service": "rule:admin_required",
+    "identity:delete_service": "rule:admin_required",
+
+    "identity:get_endpoint": "rule:admin_required",
+    "identity:list_endpoints": "rule:admin_required",
+    "identity:create_endpoint": "rule:admin_required",
+    "identity:update_endpoint": "rule:admin_required",
+    "identity:delete_endpoint": "rule:admin_required",
+
+    "identity:get_domain": "rule:admin_required",
+    "identity:list_domains": "rule:admin_required",
+    "identity:create_domain": "rule:admin_required",
+    "identity:update_domain": "rule:admin_required",
+    "identity:delete_domain": "rule:admin_required",
+
+    "identity:get_project": "rule:admin_required",
+    "identity:list_projects": "rule:admin_required",
+    "identity:list_user_projects": "rule:admin_or_owner",
+    "identity:create_project": "rule:admin_required",
+    "identity:update_project": "rule:admin_required",
+    "identity:delete_project": "rule:admin_required",
+
+    "identity:get_user": "rule:admin_required",
+    "identity:list_users": "rule:admin_required",
+    "identity:create_user": "rule:admin_required",
+    "identity:update_user": "rule:admin_required",
+    "identity:delete_user": "rule:admin_required",
+    "identity:change_password": "rule:admin_or_owner",
+
+    "identity:get_group": "rule:admin_required",
+    "identity:list_groups": "rule:admin_required",
+    "identity:list_groups_for_user": "rule:admin_or_owner",
+    "identity:create_group": "rule:admin_required",
+    "identity:update_group": "rule:admin_required",
+    "identity:delete_group": "rule:admin_required",
+    "identity:list_users_in_group": "rule:admin_required",
+    "identity:remove_user_from_group": "rule:admin_required",
+    "identity:check_user_in_group": "rule:admin_required",
+    "identity:add_user_to_group": "rule:admin_required",
+
+    "identity:get_credential": "rule:admin_required",
+    "identity:list_credentials": "rule:admin_required",
+    "identity:create_credential": "rule:admin_required",
+    "identity:update_credential": "rule:admin_required",
+    "identity:delete_credential": "rule:admin_required",
+
+    "identity:ec2_get_credential": "rule:admin_or_owner",
+    "identity:ec2_list_credentials": "rule:admin_or_owner",
+    "identity:ec2_create_credential": "rule:admin_or_owner",
+    "identity:ec2_delete_credential": "rule:admin_required or (rule:owner and user_id:%(target.credential.user_id)s)",
+
+    "identity:get_role": "rule:admin_required",
+    "identity:list_roles": "rule:admin_required",
+    "identity:create_role": "rule:admin_required",
+    "identity:update_role": "rule:admin_required",
+    "identity:delete_role": "rule:admin_required",
+
+    "identity:check_grant": "rule:admin_required",
+    "identity:list_grants": "rule:admin_required",
+    "identity:create_grant": "rule:admin_required",
+    "identity:revoke_grant": "rule:admin_required",
+
+    "identity:list_role_assignments": "rule:admin_required",
+
+    "identity:get_policy": "rule:admin_required",
+    "identity:list_policies": "rule:admin_required",
+    "identity:create_policy": "rule:admin_required",
+    "identity:update_policy": "rule:admin_required",
+    "identity:delete_policy": "rule:admin_required",
+
+    "identity:check_token": "rule:admin_required",
+    "identity:validate_token": "rule:service_or_admin",
+    "identity:validate_token_head": "rule:service_or_admin",
+    "identity:revocation_list": "rule:service_or_admin",
+    "identity:revoke_token": "rule:admin_or_owner",
+
+    "identity:create_trust": "user_id:%(trust.trustor_user_id)s",
+    "identity:get_trust": "rule:admin_or_owner",
+    "identity:list_trusts": "",
+    "identity:list_roles_for_trust": "",
+    "identity:check_role_for_trust": "",
+    "identity:get_role_for_trust": "",
+    "identity:delete_trust": "",
+
+    "identity:create_consumer": "rule:admin_required",
+    "identity:get_consumer": "rule:admin_required",
+    "identity:list_consumers": "rule:admin_required",
+    "identity:delete_consumer": "rule:admin_required",
+    "identity:update_consumer": "rule:admin_required",
+
+    "identity:authorize_request_token": "rule:admin_required",
+    "identity:list_access_token_roles": "rule:admin_required",
+    "identity:get_access_token_role": "rule:admin_required",
+    "identity:list_access_tokens": "rule:admin_required",
+    "identity:get_access_token": "rule:admin_required",
+    "identity:delete_access_token": "rule:admin_required",
+
+    "identity:list_projects_for_endpoint": "rule:admin_required",
+    "identity:add_endpoint_to_project": "rule:admin_required",
+    "identity:check_endpoint_in_project": "rule:admin_required",
+    "identity:list_endpoints_for_project": "rule:admin_required",
+    "identity:remove_endpoint_from_project": "rule:admin_required",
+
+    "identity:create_endpoint_group": "rule:admin_required",
+    "identity:list_endpoint_groups": "rule:admin_required",
+    "identity:get_endpoint_group": "rule:admin_required",
+    "identity:update_endpoint_group": "rule:admin_required",
+    "identity:delete_endpoint_group": "rule:admin_required",
+    "identity:list_projects_associated_with_endpoint_group": "rule:admin_required",
+    "identity:list_endpoints_associated_with_endpoint_group": "rule:admin_required",
+    "identity:list_endpoint_groups_for_project": "rule:admin_required",
+    "identity:add_endpoint_group_to_project": "rule:admin_required",
+    "identity:remove_endpoint_group_from_project": "rule:admin_required",
+
+    "identity:create_identity_provider": "rule:admin_required",
+    "identity:list_identity_providers": "rule:admin_required",
+    "identity:get_identity_providers": "rule:admin_required",
+    "identity:update_identity_provider": "rule:admin_required",
+    "identity:delete_identity_provider": "rule:admin_required",
+
+    "identity:create_protocol": "rule:admin_required",
+    "identity:update_protocol": "rule:admin_required",
+    "identity:get_protocol": "rule:admin_required",
+    "identity:list_protocols": "rule:admin_required",
+    "identity:delete_protocol": "rule:admin_required",
+
+    "identity:create_mapping": "rule:admin_required",
+    "identity:get_mapping": "rule:admin_required",
+    "identity:list_mappings": "rule:admin_required",
+    "identity:delete_mapping": "rule:admin_required",
+    "identity:update_mapping": "rule:admin_required",
+
+    "identity:get_auth_catalog": "",
+    "identity:get_auth_projects": "",
+    "identity:get_auth_domains": "",
+
+    "identity:list_projects_for_groups": "",
+    "identity:list_domains_for_groups": "",
+
+    "identity:list_revoke_events": "",
+
+    "identity:create_policy_association_for_endpoint": "rule:admin_required",
+    "identity:check_policy_association_for_endpoint": "rule:admin_required",
+    "identity:delete_policy_association_for_endpoint": "rule:admin_required",
+    "identity:create_policy_association_for_service": "rule:admin_required",
+    "identity:check_policy_association_for_service": "rule:admin_required",
+    "identity:delete_policy_association_for_service": "rule:admin_required",
+    "identity:create_policy_association_for_region_and_service": "rule:admin_required",
+    "identity:check_policy_association_for_region_and_service": "rule:admin_required",
+    "identity:delete_policy_association_for_region_and_service": "rule:admin_required",
+    "identity:get_policy_for_endpoint": "rule:admin_required",
+    "identity:list_endpoints_for_policy": "rule:admin_required"
+}
diff --git a/keystone/files/keystonerc b/keystone/files/keystonerc
new file mode 100644
index 0000000..3a1ca5f
--- /dev/null
+++ b/keystone/files/keystonerc
@@ -0,0 +1,7 @@
+{%- set server = pillar.keystone.server %}
+export OS_USERNAME={{ server.admin_name }}
+export OS_PASSWORD={{ server.admin_password }}
+export OS_TENANT_NAME={{ server.admin_tenant }}
+export OS_AUTH_URL=http://{{ server.bind.private_address }}:{{ server.bind.private_port }}/v2.0
+export OS_SERVICE_TOKEN={{ server.service_token }}
+export OS_SERVICE_ENDPOINT="http://{{ server.bind.private_address }}:{{ server.bind.private_port }}/v2.0/"
diff --git a/keystone/files/keystonerc_user b/keystone/files/keystonerc_user
new file mode 100644
index 0000000..62293bf
--- /dev/null
+++ b/keystone/files/keystonerc_user
@@ -0,0 +1,14 @@
+{%- set cluster = pillar.keystone.cluster %}
+{%- set provider = salt['pillar.get']('keystone:control:provider:'+provider_name) %}
+{%- if provider.user is defined %}
+export OS_USERNAME={{ provider.user }}
+export OS_PASSWORD={{ provider.password }}
+export OS_TENANT_NAME={{ provider.tenant }}
+export OS_AUTH_URL=http://{{ provider.host }}:{{ provider.port }}/{{ provider.get('version', 'v2.0') }}
+{%- endif %}
+{%- if provider.token is defined %}
+export OS_SERVICE_TOKEN={{ provider.token }}
+export OS_SERVICE_ENDPOINT="http://{{ provider.host }}:{{ provider.port }}/{{ provider.get('version', 'v2.0') }}/"
+{%- endif %}
+export OS_AUTH_STRATEGY=keystone
+	
\ No newline at end of file
diff --git a/keystone/files/keystonercv3 b/keystone/files/keystonercv3
new file mode 100644
index 0000000..9566528
--- /dev/null
+++ b/keystone/files/keystonercv3
@@ -0,0 +1,9 @@
+{%- set server = pillar.keystone.server %}
+export OS_IDENTITY_API_VERSION=3
+export OS_AUTH_URL=http://{{ server.bind.private_address }}:{{ server.bind.private_port }}/v3
+export OS_PROJECT_DOMAIN_NAME=default
+export OS_USER_DOMAIN_NAME=default
+export OS_PROJECT_NAME={{ server.admin_tenant }}
+export OS_TENANT_NAME={{ server.admin_tenant }}
+export OS_USERNAME={{ server.admin_name }}
+export OS_PASSWORD={{ server.admin_password }}
\ No newline at end of file
diff --git a/keystone/files/kilo/keystone-paste.ini.Debian b/keystone/files/kilo/keystone-paste.ini.Debian
new file mode 100644
index 0000000..3e195aa
--- /dev/null
+++ b/keystone/files/kilo/keystone-paste.ini.Debian
@@ -0,0 +1,106 @@
+# Keystone PasteDeploy configuration file.
+
+[filter:debug]
+paste.filter_factory = keystone.common.wsgi:Debug.factory
+
+[filter:request_id]
+paste.filter_factory = oslo_middleware:RequestId.factory
+
+[filter:build_auth_context]
+paste.filter_factory = keystone.middleware:AuthContextMiddleware.factory
+
+[filter:token_auth]
+paste.filter_factory = keystone.middleware:TokenAuthMiddleware.factory
+
+[filter:admin_token_auth]
+paste.filter_factory = keystone.middleware:AdminTokenAuthMiddleware.factory
+
+[filter:json_body]
+paste.filter_factory = keystone.middleware:JsonBodyMiddleware.factory
+
+[filter:user_crud_extension]
+paste.filter_factory = keystone.contrib.user_crud:CrudExtension.factory
+
+[filter:crud_extension]
+paste.filter_factory = keystone.contrib.admin_crud:CrudExtension.factory
+
+[filter:ec2_extension]
+paste.filter_factory = keystone.contrib.ec2:Ec2Extension.factory
+
+[filter:ec2_extension_v3]
+paste.filter_factory = keystone.contrib.ec2:Ec2ExtensionV3.factory
+
+[filter:federation_extension]
+paste.filter_factory = keystone.contrib.federation.routers:FederationExtension.factory
+
+[filter:oauth1_extension]
+paste.filter_factory = keystone.contrib.oauth1.routers:OAuth1Extension.factory
+
+[filter:s3_extension]
+paste.filter_factory = keystone.contrib.s3:S3Extension.factory
+
+[filter:endpoint_filter_extension]
+paste.filter_factory = keystone.contrib.endpoint_filter.routers:EndpointFilterExtension.factory
+
+[filter:endpoint_policy_extension]
+paste.filter_factory = keystone.contrib.endpoint_policy.routers:EndpointPolicyExtension.factory
+
+[filter:simple_cert_extension]
+paste.filter_factory = keystone.contrib.simple_cert:SimpleCertExtension.factory
+
+[filter:revoke_extension]
+paste.filter_factory = keystone.contrib.revoke.routers:RevokeExtension.factory
+
+[filter:url_normalize]
+paste.filter_factory = keystone.middleware:NormalizingFilter.factory
+
+[filter:sizelimit]
+paste.filter_factory = oslo_middleware.sizelimit:RequestBodySizeLimiter.factory
+
+[app:public_service]
+paste.app_factory = keystone.service:public_app_factory
+
+[app:service_v3]
+paste.app_factory = keystone.service:v3_app_factory
+
+[app:admin_service]
+paste.app_factory = keystone.service:admin_app_factory
+
+[pipeline:public_api]
+# The last item in this pipeline must be public_service or an equivalent
+# application. It cannot be a filter.
+pipeline = sizelimit url_normalize request_id build_auth_context token_auth admin_token_auth json_body ec2_extension user_crud_extension public_service
+
+[pipeline:admin_api]
+# The last item in this pipeline must be admin_service or an equivalent
+# application. It cannot be a filter.
+pipeline = sizelimit url_normalize request_id build_auth_context token_auth admin_token_auth json_body ec2_extension s3_extension crud_extension admin_service
+
+[pipeline:api_v3]
+# The last item in this pipeline must be service_v3 or an equivalent
+# application. It cannot be a filter.
+pipeline = sizelimit url_normalize request_id build_auth_context token_auth admin_token_auth json_body ec2_extension_v3 s3_extension simple_cert_extension revoke_extension federation_extension oauth1_extension endpoint_filter_extension endpoint_policy_extension service_v3
+
+[app:public_version_service]
+paste.app_factory = keystone.service:public_version_app_factory
+
+[app:admin_version_service]
+paste.app_factory = keystone.service:admin_version_app_factory
+
+[pipeline:public_version_api]
+pipeline = sizelimit url_normalize public_version_service
+
+[pipeline:admin_version_api]
+pipeline = sizelimit url_normalize admin_version_service
+
+[composite:main]
+use = egg:Paste#urlmap
+/v2.0 = public_api
+/v3 = api_v3
+/ = public_version_api
+
+[composite:admin]
+use = egg:Paste#urlmap
+/v2.0 = admin_api
+/v3 = api_v3
+/ = admin_version_api
diff --git a/keystone/files/kilo/keystone.conf.Debian b/keystone/files/kilo/keystone.conf.Debian
new file mode 100644
index 0000000..a279823
--- /dev/null
+++ b/keystone/files/kilo/keystone.conf.Debian
@@ -0,0 +1,1777 @@
+{% from "keystone/map.jinja" import server with context %}
+[DEFAULT]
+
+#
+# From keystone
+#
+
+# A "shared secret" that can be used to bootstrap Keystone. This "token" does
+# not represent a user, and carries no explicit authorization. To disable in
+# production (highly recommended), remove AdminTokenAuthMiddleware from your
+# paste application pipelines (for example, in keystone-paste.ini). (string
+# value)
+#admin_token = ADMIN
+admin_token={{ server.service_token }}
+
+# (Deprecated) The port which the OpenStack Compute service listens on. This
+# option was only used for string replacement in the templated catalog backend.
+# Templated catalogs should replace the "$(compute_port)s" substitution with
+# the static port of the compute service. As of Juno, this option is deprecated
+# and will be removed in the L release. (integer value)
+#compute_port = 8774
+
+# The base public endpoint URL for Keystone that is advertised to clients
+# (NOTE: this does NOT affect how Keystone listens for connections). Defaults
+# to the base host URL of the request. E.g. a request to
+# http://server:5000/v3/users will default to http://server:5000. You should
+# only need to set this value if the base URL contains a path (e.g. /prefix/v3)
+# or the endpoint should be found on a different server. (string value)
+#public_endpoint = <None>
+
+# The base admin endpoint URL for Keystone that is advertised to clients (NOTE:
+# this does NOT affect how Keystone listens for connections). Defaults to the
+# base host URL of the request. E.g. a request to http://server:35357/v3/users
+# will default to http://server:35357. You should only need to set this value
+# if the base URL contains a path (e.g. /prefix/v3) or the endpoint should be
+# found on a different server. (string value)
+#admin_endpoint = <None>
+
+# Maximum depth of the project hierarchy. WARNING: setting it to a large value
+# may adversely impact performance. (integer value)
+#max_project_tree_depth = 5
+
+# Limit the sizes of user & project ID/names. (integer value)
+#max_param_size = 64
+
+# Similar to max_param_size, but provides an exception for token values.
+# (integer value)
+#max_token_size = 8192
+
+# Similar to the member_role_name option, this represents the default role ID
+# used to associate users with their default projects in the v2 API. This will
+# be used as the explicit role where one is not specified by the v2 API.
+# (string value)
+#member_role_id = 9fe2ff9ee4384b1894a90878d3e92bab
+
+# This is the role name used in combination with the member_role_id option; see
+# that option for more detail. (string value)
+#member_role_name = _member_
+
+# The value passed as the keyword "rounds" to passlib's encrypt method.
+# (integer value)
+#crypt_strength = 40000
+
+# The maximum number of entities that will be returned in a collection, with no
+# limit set by default. This global limit may be then overridden for a specific
+# driver, by specifying a list_limit in the appropriate section (e.g.
+# [assignment]). (integer value)
+#list_limit = <None>
+
+# Set this to false if you want to enable the ability for user, group and
+# project entities to be moved between domains by updating their domain_id.
+# Allowing such movement is not recommended if the scope of a domain admin is
+# being restricted by use of an appropriate policy file (see
+# policy.v3cloudsample as an example). (boolean value)
+#domain_id_immutable = true
+
+# If set to true, strict password length checking is performed for password
+# manipulation. If a password exceeds the maximum length, the operation will
+# fail with an HTTP 403 Forbidden error. If set to false, passwords are
+# automatically truncated to the maximum length. (boolean value)
+#strict_password_check = false
+
+# The HTTP header used to determine the scheme for the original request, even
+# if it was removed by an SSL terminating proxy. Typical value is
+# "HTTP_X_FORWARDED_PROTO". (string value)
+#secure_proxy_ssl_header = <None>
+
+#
+# From keystone.notifications
+#
+
+# Default publisher_id for outgoing notifications (string value)
+#default_publisher_id = <None>
+
+# Define the notification format for Identity Service events. A "basic"
+# notification has information about the resource being operated on. A "cadf"
+# notification has the same information, as well as information about the
+# initiator of the event. Valid options are: basic and cadf (string value)
+#notification_format = basic
+
+#
+# From keystone.openstack.common.eventlet_backdoor
+#
+
+# Enable eventlet backdoor.  Acceptable values are 0, <port>, and
+# <start>:<end>, where 0 results in listening on a random tcp port number;
+# <port> results in listening on the specified port number (and not enabling
+# backdoor if that port is in use); and <start>:<end> results in listening on
+# the smallest unused port number within the specified range of port numbers.
+# The chosen port is displayed in the service's log file. (string value)
+#backdoor_port = <None>
+
+#
+# From oslo.log
+#
+
+# Print debugging output (set logging level to DEBUG instead of default WARNING
+# level). (boolean value)
+#debug = false
+debug = false
+
+# Print more verbose output (set logging level to INFO instead of default
+# WARNING level). (boolean value)
+#verbose = false
+verbose = true
+
+# The name of a logging configuration file. This file is appended to any
+# existing logging configuration files. For details about logging configuration
+# files, see the Python logging module documentation. (string value)
+# Deprecated group/name - [DEFAULT]/log_config
+#log_config_append = <None>
+
+# DEPRECATED. A logging.Formatter log message format string which may use any
+# of the available logging.LogRecord attributes. This option is deprecated.
+# Please use logging_context_format_string and logging_default_format_string
+# instead. (string value)
+#log_format = <None>
+
+# Format string for %%(asctime)s in log records. Default: %(default)s . (string
+# value)
+#log_date_format = %Y-%m-%d %H:%M:%S
+
+# (Optional) Name of log file to output to. If no default is set, logging will
+# go to stdout. (string value)
+# Deprecated group/name - [DEFAULT]/logfile
+#log_file = <None>
+
+# (Optional) The base directory used for relative --log-file paths. (string
+# value)
+# Deprecated group/name - [DEFAULT]/logdir
+#log_dir = <None>
+log_dir = /var/log/keystone
+
+# Use syslog for logging. Existing syslog format is DEPRECATED during I, and
+# will change in J to honor RFC5424. (boolean value)
+#use_syslog = false
+
+# (Optional) Enables or disables syslog rfc5424 format for logging. If enabled,
+# prefixes the MSG part of the syslog message with APP-NAME (RFC5424). The
+# format without the APP-NAME is deprecated in I, and will be removed in J.
+# (boolean value)
+#use_syslog_rfc_format = false
+
+# Syslog facility to receive log lines. (string value)
+#syslog_log_facility = LOG_USER
+
+# Log output to standard error. (boolean value)
+#use_stderr = true
+
+# Format string to use for log messages with context. (string value)
+#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
+
+# Format string to use for log messages without context. (string value)
+#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
+
+# Data to append to log format when level is DEBUG. (string value)
+#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
+
+# Prefix each line of exception output with this format. (string value)
+#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d TRACE %(name)s %(instance)s
+
+# List of logger=LEVEL pairs. (list value)
+#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN
+
+# Enables or disables publication of error events. (boolean value)
+#publish_errors = false
+
+# Enables or disables fatal status of deprecations. (boolean value)
+#fatal_deprecations = false
+
+# The format for an instance that is passed with the log message. (string
+# value)
+#instance_format = "[instance: %(uuid)s] "
+
+# The format for an instance UUID that is passed with the log message. (string
+# value)
+#instance_uuid_format = "[instance: %(uuid)s] "
+
+#
+# From oslo.messaging
+#
+
+# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
+# The "host" option should point or resolve to this address. (string value)
+#rpc_zmq_bind_address = *
+
+# MatchMaker driver. (string value)
+#rpc_zmq_matchmaker = oslo_messaging._drivers.matchmaker.MatchMakerLocalhost
+
+# ZeroMQ receiver listening port. (integer value)
+#rpc_zmq_port = 9501
+
+# Number of ZeroMQ contexts, defaults to 1. (integer value)
+#rpc_zmq_contexts = 1
+
+# Maximum number of ingress messages to locally buffer per topic. Default is
+# unlimited. (integer value)
+#rpc_zmq_topic_backlog = <None>
+
+# Directory for holding IPC sockets. (string value)
+#rpc_zmq_ipc_dir = /var/run/openstack
+
+# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
+# "host" option, if running Nova. (string value)
+#rpc_zmq_host = localhost
+
+# Seconds to wait before a cast expires (TTL). Only supported by impl_zmq.
+# (integer value)
+#rpc_cast_timeout = 30
+
+# Heartbeat frequency. (integer value)
+#matchmaker_heartbeat_freq = 300
+
+# Heartbeat time-to-live. (integer value)
+#matchmaker_heartbeat_ttl = 600
+
+# Size of RPC thread pool. (integer value)
+#rpc_thread_pool_size = 64
+
+# Driver or drivers to handle sending notifications. (multi valued)
+{%- if server.notification %}
+#notification_driver=
+notification_driver=messaging
+{%- endif %}
+# AMQP topic used for OpenStack notifications. (list value)
+# Deprecated group/name - [rpc_notifier2]/topics
+#notification_topics = notifications
+
+# Seconds to wait for a response from a call. (integer value)
+#rpc_response_timeout = 60
+
+# A URL representing the messaging driver to use and its full configuration. If
+# not set, we fall back to the rpc_backend option and driver specific
+# configuration. (string value)
+#transport_url = <None>
+
+# The messaging driver to use, defaults to rabbit. Other drivers include qpid
+# and zmq. (string value)
+#rpc_backend = rabbit
+
+# The default exchange under which topics are scoped. May be overridden by an
+# exchange name specified in the transport_url option. (string value)
+#control_exchange = keystone
+
+
+[assignment]
+
+#
+# From keystone
+#
+
+# Assignment backend driver. (string value)
+#driver = <None>
+
+
+[auth]
+
+#
+# From keystone
+#
+
+# Default auth methods. (list value)
+#methods = external,password,token,oauth1
+
+# The password auth plugin module. (string value)
+#password = keystone.auth.plugins.password.Password
+
+# The token auth plugin module. (string value)
+#token = keystone.auth.plugins.token.Token
+
+# The external (REMOTE_USER) auth plugin module. (string value)
+#external = keystone.auth.plugins.external.DefaultDomain
+
+# The oAuth1.0 auth plugin module. (string value)
+#oauth1 = keystone.auth.plugins.oauth1.OAuth
+
+
+[cache]
+
+#
+# From keystone
+#
+
+# Prefix for building the configuration dictionary for the cache region. This
+# should not need to be changed unless there is another dogpile.cache region
+# with the same configuration name. (string value)
+#config_prefix = cache.keystone
+
+# Default TTL, in seconds, for any cached item in the dogpile.cache region.
+# This applies to any cached method that doesn't have an explicit cache
+# expiration time defined for it. (integer value)
+#expiration_time = 600
+
+# Dogpile.cache backend module. It is recommended that Memcache with pooling
+# (keystone.cache.memcache_pool) or Redis (dogpile.cache.redis) be used in
+# production deployments.  Small workloads (single process) like devstack can
+# use the dogpile.cache.memory backend. (string value)
+#backend = keystone.common.cache.noop
+backend=keystone.cache.memcache_pool
+
+# Arguments supplied to the backend module. Specify this option once per
+# argument to be passed to the dogpile.cache backend. Example format:
+# "<argname>:<value>". (multi valued)
+#backend_argument =
+
+# Proxy classes to import that will affect the way the dogpile.cache backend
+# functions. See the dogpile.cache documentation on changing-backend-behavior.
+# (list value)
+#proxies =
+
+# Global toggle for all caching using the should_cache_fn mechanism. (boolean
+# value)
+#enabled = false
+enabled = true
+
+# Extra debugging from the cache backend (cache keys, get/set/delete/etc
+# calls). This is only really useful if you need to see the specific cache-
+# backend get/set/delete calls with the keys/values.  Typically this should be
+# left set to false. (boolean value)
+#debug_cache_backend = false
+
+# Memcache servers in the format of "host:port". (dogpile.cache.memcache and
+# keystone.cache.memcache_pool backends only). (list value)
+#memcache_servers = localhost:11211
+{%- if server.cache is defined %}
+{%- if server.cache.members is defined %}
+memcache_servers = {%- for member in server.cache.members %}{{ member.host }}:{{ member.port }}{% if not loop.last %},{% endif %}{%- endfor %}
+{%- else %}
+memcache_servers = ['{{ server.cache.host }}:{{ server.cache.port }}']
+{%- endif %}
+{%- endif %}
+
+# Number of seconds memcached server is considered dead before it is tried
+# again. (dogpile.cache.memcache and keystone.cache.memcache_pool backends
+# only). (integer value)
+#memcache_dead_retry = 300
+memcache_dead_retry=300
+
+# Timeout in seconds for every call to a server. (dogpile.cache.memcache and
+# keystone.cache.memcache_pool backends only). (integer value)
+#memcache_socket_timeout = 3
+memcache_socket_timeout = 1
+
+# Max total number of open connections to every memcached server.
+# (keystone.cache.memcache_pool backend only). (integer value)
+#memcache_pool_maxsize = 10
+memcache_pool_maxsize = 100
+
+# Number of seconds a connection to memcached is held unused in the pool before
+# it is closed. (keystone.cache.memcache_pool backend only). (integer value)
+#memcache_pool_unused_timeout = 60
+memcache_pool_unused_timeout = 60
+
+# Number of seconds that an operation will wait to get a memcache client
+# connection. (integer value)
+#memcache_pool_connection_get_timeout = 10
+
+
+[catalog]
+
+#
+# From keystone
+#
+
+# Catalog template file name for use with the template catalog backend. (string
+# value)
+#template_file = default_catalog.templates
+template_file=/etc/keystone/default_catalog.templates
+
+# Catalog backend driver. (string value)
+#driver=keystone.catalog.backends.sql.Catalog
+driver=keystone.catalog.backends.sql.Catalog
+
+# Toggle for catalog caching. This has no effect unless global caching is
+# enabled. (boolean value)
+#caching = true
+
+# Time to cache catalog data (in seconds). This has no effect unless global and
+# catalog caching are enabled. (integer value)
+#cache_time = <None>
+
+# Maximum number of entities that will be returned in a catalog collection.
+# (integer value)
+#list_limit = <None>
+
+
+[credential]
+
+#
+# From keystone
+#
+
+# Credential backend driver. (string value)
+#driver = keystone.credential.backends.sql.Credential
+
+
+[database]
+
+#
+# From oslo.db
+#
+
+# The file name to use with SQLite. (string value)
+# Deprecated group/name - [DEFAULT]/sqlite_db
+#sqlite_db = oslo.sqlite
+
+# If True, SQLite uses synchronous mode. (boolean value)
+# Deprecated group/name - [DEFAULT]/sqlite_synchronous
+#sqlite_synchronous = true
+
+# The back end to use for the database. (string value)
+# Deprecated group/name - [DEFAULT]/db_backend
+#backend = sqlalchemy
+
+# The SQLAlchemy connection string to use to connect to the database. (string
+# value)
+# Deprecated group/name - [DEFAULT]/sql_connection
+# Deprecated group/name - [DATABASE]/sql_connection
+# Deprecated group/name - [sql]/connection
+#connection = <None>
+connection={{ server.database.engine }}://{{ server.database.user }}:{{ server.database.password }}@{{ server.database.host }}/{{ server.database.name }}
+
+# The SQLAlchemy connection string to use to connect to the slave database.
+# (string value)
+#slave_connection = <None>
+
+# The SQL mode to be used for MySQL sessions. This option, including the
+# default, overrides any server-set SQL mode. To use whatever SQL mode is set
+# by the server configuration, set this to no value. Example: mysql_sql_mode=
+# (string value)
+#mysql_sql_mode = TRADITIONAL
+
+# Timeout before idle SQL connections are reaped. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_idle_timeout
+# Deprecated group/name - [DATABASE]/sql_idle_timeout
+# Deprecated group/name - [sql]/idle_timeout
+#idle_timeout = 3600
+idle_timeout = 3600
+
+# Minimum number of SQL connections to keep open in a pool. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_min_pool_size
+# Deprecated group/name - [DATABASE]/sql_min_pool_size
+#min_pool_size = 1
+
+# Maximum number of SQL connections to keep open in a pool. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_max_pool_size
+# Deprecated group/name - [DATABASE]/sql_max_pool_size
+#max_pool_size = <None>
+max_pool_size=10
+max_overflow=30
+max_retries=-1
+
+# Maximum number of database connection retries during startup. Set to -1 to
+# specify an infinite retry count. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_max_retries
+# Deprecated group/name - [DATABASE]/sql_max_retries
+#max_retries = 10
+
+# Interval between retries of opening a SQL connection. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_retry_interval
+# Deprecated group/name - [DATABASE]/reconnect_interval
+#retry_interval = 10
+
+# If set, use this value for max_overflow with SQLAlchemy. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_max_overflow
+# Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
+#max_overflow = <None>
+
+# Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
+# value)
+# Deprecated group/name - [DEFAULT]/sql_connection_debug
+#connection_debug = 0
+
+# Add Python stack traces to SQL as comment strings. (boolean value)
+# Deprecated group/name - [DEFAULT]/sql_connection_trace
+#connection_trace = false
+
+# If set, use this value for pool_timeout with SQLAlchemy. (integer value)
+# Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
+#pool_timeout = <None>
+
+# Enable the experimental use of database reconnect on connection lost.
+# (boolean value)
+#use_db_reconnect = false
+
+# Seconds between retries of a database transaction. (integer value)
+#db_retry_interval = 1
+
+# If True, increases the interval between retries of a database operation up to
+# db_max_retry_interval. (boolean value)
+#db_inc_retry_interval = true
+
+# If db_inc_retry_interval is set, the maximum seconds between retries of a
+# database operation. (integer value)
+#db_max_retry_interval = 10
+
+# Maximum retries in case of connection error or deadlock error before error is
+# raised. Set to -1 to specify an infinite retry count. (integer value)
+#db_max_retries = 20
+
+
+[domain_config]
+
+#
+# From keystone
+#
+
+# Domain config backend driver. (string value)
+#driver = keystone.resource.config_backends.sql.DomainConfig
+
+# Toggle for domain config caching. This has no effect unless global caching is
+# enabled. (boolean value)
+#caching = true
+
+# TTL (in seconds) to cache domain config data. This has no effect unless
+# domain config caching is enabled. (integer value)
+#cache_time = 300
+
+
+[endpoint_filter]
+
+#
+# From keystone
+#
+
+# Endpoint Filter backend driver (string value)
+#driver = keystone.contrib.endpoint_filter.backends.sql.EndpointFilter
+
+# Toggle to return all active endpoints if no filter exists. (boolean value)
+#return_all_endpoints_if_no_filter = true
+
+
+[endpoint_policy]
+
+#
+# From keystone
+#
+
+# Endpoint policy backend driver (string value)
+#driver = keystone.contrib.endpoint_policy.backends.sql.EndpointPolicy
+
+
+[eventlet_server]
+
+#
+# From keystone
+#
+
+# The number of worker processes to serve the public eventlet application.
+# Defaults to number of CPUs (minimum of 2). (integer value)
+# Deprecated group/name - [DEFAULT]/public_workers
+#public_workers = <None>
+
+# The number of worker processes to serve the admin eventlet application.
+# Defaults to number of CPUs (minimum of 2). (integer value)
+# Deprecated group/name - [DEFAULT]/admin_workers
+#admin_workers = <None>
+
+# The IP address of the network interface for the public service to listen on.
+# (string value)
+# Deprecated group/name - [DEFAULT]/bind_host
+# Deprecated group/name - [DEFAULT]/public_bind_host
+#public_bind_host = 0.0.0.0
+public_bind_host={% if server.bind.address is defined %}{{ server.bind.address }}{% else %}{{ server.bind.public_address }}{% endif %}
+
+# The port number which the public service listens on. (integer value)
+# Deprecated group/name - [DEFAULT]/public_port
+#public_port = 5000
+
+# The IP address of the network interface for the admin service to listen on.
+# (string value)
+# Deprecated group/name - [DEFAULT]/bind_host
+# Deprecated group/name - [DEFAULT]/admin_bind_host
+#admin_bind_host = 0.0.0.0
+admin_bind_host={% if server.bind.address is defined %}{{ server.bind.address }}{% else %}{{ server.bind.public_address }}{% endif %}
+
+# The port number which the admin service listens on. (integer value)
+# Deprecated group/name - [DEFAULT]/admin_port
+#admin_port = 35357
+
+# Set this to true if you want to enable TCP_KEEPALIVE on server sockets, i.e.
+# sockets used by the Keystone wsgi server for client connections. (boolean
+# value)
+# Deprecated group/name - [DEFAULT]/tcp_keepalive
+#tcp_keepalive = false
+
+# Sets the value of TCP_KEEPIDLE in seconds for each server socket. Only
+# applies if tcp_keepalive is true. (integer value)
+# Deprecated group/name - [DEFAULT]/tcp_keepidle
+#tcp_keepidle = 600
+
+
+[eventlet_server_ssl]
+
+#
+# From keystone
+#
+
+# Toggle for SSL support on the Keystone eventlet servers. (boolean value)
+# Deprecated group/name - [ssl]/enable
+#enable = false
+
+# Path of the certfile for SSL. For non-production environments, you may be
+# interested in using `keystone-manage ssl_setup` to generate self-signed
+# certificates. (string value)
+# Deprecated group/name - [ssl]/certfile
+#certfile = /etc/keystone/ssl/certs/keystone.pem
+
+# Path of the keyfile for SSL. (string value)
+# Deprecated group/name - [ssl]/keyfile
+#keyfile = /etc/keystone/ssl/private/keystonekey.pem
+
+# Path of the CA cert file for SSL. (string value)
+# Deprecated group/name - [ssl]/ca_certs
+#ca_certs = /etc/keystone/ssl/certs/ca.pem
+
+# Require client certificate. (boolean value)
+# Deprecated group/name - [ssl]/cert_required
+#cert_required = false
+
+
+[federation]
+
+#
+# From keystone
+#
+
+# Federation backend driver. (string value)
+#driver = keystone.contrib.federation.backends.sql.Federation
+
+# Value to be used when filtering assertion parameters from the environment.
+# (string value)
+#assertion_prefix =
+
+# Value to be used to obtain the entity ID of the Identity Provider from the
+# environment (e.g. if using the mod_shib plugin this value is `Shib-Identity-
+# Provider`). (string value)
+#remote_id_attribute = <None>
+
+# A domain name that is reserved to allow federated ephemeral users to have a
+# domain concept. Note that an admin will not be able to create a domain with
+# this name or update an existing domain to this name. You are not advised to
+# change this value unless you really have to. Changing this option to empty
+# string or None will not have any impact and default name will be used.
+# (string value)
+#federated_domain_name = Federated
+
+# A list of trusted dashboard hosts. Before accepting a Single Sign-On request
+# to return a token, the origin host must be a member of the trusted_dashboard
+# list. This configuration option may be repeated for multiple values. For
+# example: trusted_dashboard=http://acme.com trusted_dashboard=http://beta.com
+# (multi valued)
+#trusted_dashboard =
+
+# Location of Single Sign-On callback handler, will return a token to a trusted
+# dashboard host. (string value)
+#sso_callback_template = /etc/keystone/sso_callback_template.html
+
+
+[fernet_tokens]
+
+#
+# From keystone
+#
+
+# Directory containing Fernet token keys. (string value)
+key_repository = {{ server.tokens.location }}
+
+# This controls how many keys are held in rotation by keystone-manage
+# fernet_rotate before they are discarded. The default value of 3 means that
+# keystone will maintain one staged key, one primary key, and one secondary
+# key. Increasing this value means that additional secondary keys will be kept
+# in the rotation. (integer value)
+#max_active_keys = 3
+
+
+[identity]
+
+#
+# From keystone
+#
+
+# This references the domain to use for all Identity API v2 requests (which are
+# not aware of domains). A domain with this ID will be created for you by
+# keystone-manage db_sync in migration 008. The domain referenced by this ID
+# cannot be deleted on the v3 API, to prevent accidentally breaking the v2 API.
+# There is nothing special about this domain, other than the fact that it must
+# exist to order to maintain support for your v2 clients. (string value)
+#default_domain_id = default
+
+# A subset (or all) of domains can have their own identity driver, each with
+# their own partial configuration options, stored in either the resource
+# backend or in a file in a domain configuration directory (depending on the
+# setting of domain_configurations_from_database). Only values specific to the
+# domain need to be specified in this manner. This feature is disabled by
+# default; set to true to enable. (boolean value)
+#domain_specific_drivers_enabled = false
+
+# Extract the domain specific configuration options from the resource backend
+# where they have been stored with the domain data. This feature is disabled by
+# default (in which case the domain specific options will be loaded from files
+# in the domain configuration directory); set to true to enable. (boolean
+# value)
+#domain_configurations_from_database = false
+
+# Path for Keystone to locate the domain specific identity configuration files
+# if domain_specific_drivers_enabled is set to true. (string value)
+#domain_config_dir = /etc/keystone/domains
+
+# Identity backend driver. (string value)
+#driver = keystone.identity.backends.sql.Identity
+driver = keystone.identity.backends.sql.Identity
+
+# Toggle for identity caching. This has no effect unless global caching is
+# enabled. (boolean value)
+#caching = true
+
+# Time to cache identity data (in seconds). This has no effect unless global
+# and identity caching are enabled. (integer value)
+#cache_time = 600
+
+# Maximum supported length for user passwords; decrease to improve performance.
+# (integer value)
+#max_password_length = 4096
+
+# Maximum number of entities that will be returned in an identity collection.
+# (integer value)
+#list_limit = <None>
+
+
+[identity_mapping]
+
+#
+# From keystone
+#
+
+# Keystone Identity Mapping backend driver. (string value)
+#driver = keystone.identity.mapping_backends.sql.Mapping
+
+# Public ID generator for user and group entities. The Keystone identity mapper
+# only supports generators that produce no more than 64 characters. (string
+# value)
+#generator = keystone.identity.id_generators.sha256.Generator
+
+# The format of user and group IDs changed in Juno for backends that do not
+# generate UUIDs (e.g. LDAP), with keystone providing a hash mapping to the
+# underlying attribute in LDAP. By default this mapping is disabled, which
+# ensures that existing IDs will not change. Even when the mapping is enabled
+# by using domain specific drivers, any users and groups from the default
+# domain being handled by LDAP will still not be mapped to ensure their IDs
+# remain backward compatible. Setting this value to False will enable the
+# mapping for even the default LDAP driver. It is only safe to do this if you
+# do not already have assignments for users and groups from the default LDAP
+# domain, and it is acceptable for Keystone to provide the different IDs to
+# clients than it did previously.  Typically this means that the only time you
+# can set this value to False is when configuring a fresh installation.
+# (boolean value)
+#backward_compatible_ids = true
+
+
+[kvs]
+
+#
+# From keystone
+#
+
+# Extra dogpile.cache backend modules to register with the dogpile.cache
+# library. (list value)
+#backends =
+
+# Prefix for building the configuration dictionary for the KVS region. This
+# should not need to be changed unless there is another dogpile.cache region
+# with the same configuration name. (string value)
+#config_prefix = keystone.kvs
+
+# Toggle to disable using a key-mangling function to ensure fixed length keys.
+# This is toggle-able for debugging purposes, it is highly recommended to
+# always leave this set to true. (boolean value)
+#enable_key_mangler = true
+
+# Default lock timeout (in seconds) for distributed locking. (integer value)
+#default_lock_timeout = 5
+
+
+[ldap]
+
+#
+# From keystone
+#
+
+# URL for connecting to the LDAP server. (string value)
+#url = ldap://localhost
+
+# User BindDN to query the LDAP server. (string value)
+#user = <None>
+
+# Password for the BindDN to query the LDAP server. (string value)
+#password = <None>
+
+# LDAP server suffix (string value)
+#suffix = cn=example,cn=com
+
+# If true, will add a dummy member to groups. This is required if the
+# objectclass for groups requires the "member" attribute. (boolean value)
+#use_dumb_member = false
+
+# DN of the "dummy member" to use when "use_dumb_member" is enabled. (string
+# value)
+#dumb_member = cn=dumb,dc=nonexistent
+
+# Delete subtrees using the subtree delete control. Only enable this option if
+# your LDAP server supports subtree deletion. (boolean value)
+#allow_subtree_delete = false
+
+# The LDAP scope for queries, this can be either "one" (onelevel/singleLevel)
+# or "sub" (subtree/wholeSubtree). (string value)
+#query_scope = one
+
+# Maximum results per page; a value of zero ("0") disables paging. (integer
+# value)
+#page_size = 0
+
+# The LDAP dereferencing option for queries. This can be either "never",
+# "searching", "always", "finding" or "default". The "default" option falls
+# back to using default dereferencing configured by your ldap.conf. (string
+# value)
+#alias_dereferencing = default
+
+# Sets the LDAP debugging level for LDAP calls. A value of 0 means that
+# debugging is not enabled. This value is a bitmask, consult your LDAP
+# documentation for possible values. (integer value)
+#debug_level = <None>
+
+# Override the system's default referral chasing behavior for queries. (boolean
+# value)
+#chase_referrals = <None>
+
+# Search base for users. (string value)
+#user_tree_dn = <None>
+
+# LDAP search filter for users. (string value)
+#user_filter = <None>
+
+# LDAP objectclass for users. (string value)
+#user_objectclass = inetOrgPerson
+
+# LDAP attribute mapped to user id. WARNING: must not be a multivalued
+# attribute. (string value)
+#user_id_attribute = cn
+
+# LDAP attribute mapped to user name. (string value)
+#user_name_attribute = sn
+
+# LDAP attribute mapped to user email. (string value)
+#user_mail_attribute = mail
+
+# LDAP attribute mapped to password. (string value)
+#user_pass_attribute = userPassword
+
+# LDAP attribute mapped to user enabled flag. (string value)
+#user_enabled_attribute = enabled
+
+# Invert the meaning of the boolean enabled values. Some LDAP servers use a
+# boolean lock attribute where "true" means an account is disabled. Setting
+# "user_enabled_invert = true" will allow these lock attributes to be used.
+# This setting will have no effect if "user_enabled_mask" or
+# "user_enabled_emulation" settings are in use. (boolean value)
+#user_enabled_invert = false
+
+# Bitmask integer to indicate the bit that the enabled value is stored in if
+# the LDAP server represents "enabled" as a bit on an integer rather than a
+# boolean. A value of "0" indicates the mask is not used. If this is not set to
+# "0" the typical value is "2". This is typically used when
+# "user_enabled_attribute = userAccountControl". (integer value)
+#user_enabled_mask = 0
+
+# Default value to enable users. This should match an appropriate int value if
+# the LDAP server uses non-boolean (bitmask) values to indicate if a user is
+# enabled or disabled. If this is not set to "True" the typical value is "512".
+# This is typically used when "user_enabled_attribute = userAccountControl".
+# (string value)
+#user_enabled_default = True
+
+# List of attributes stripped off the user on update. (list value)
+#user_attribute_ignore = default_project_id,tenants
+
+# LDAP attribute mapped to default_project_id for users. (string value)
+#user_default_project_id_attribute = <None>
+
+# Allow user creation in LDAP backend. (boolean value)
+#user_allow_create = true
+
+# Allow user updates in LDAP backend. (boolean value)
+#user_allow_update = true
+
+# Allow user deletion in LDAP backend. (boolean value)
+#user_allow_delete = true
+
+# If true, Keystone uses an alternative method to determine if a user is
+# enabled or not by checking if they are a member of the
+# "user_enabled_emulation_dn" group. (boolean value)
+#user_enabled_emulation = false
+
+# DN of the group entry to hold enabled users when using enabled emulation.
+# (string value)
+#user_enabled_emulation_dn = <None>
+
+# List of additional LDAP attributes used for mapping additional attribute
+# mappings for users. Attribute mapping format is <ldap_attr>:<user_attr>,
+# where ldap_attr is the attribute in the LDAP entry and user_attr is the
+# Identity API attribute. (list value)
+#user_additional_attribute_mapping =
+
+# Search base for projects (string value)
+# Deprecated group/name - [ldap]/tenant_tree_dn
+#project_tree_dn = <None>
+
+# LDAP search filter for projects. (string value)
+# Deprecated group/name - [ldap]/tenant_filter
+#project_filter = <None>
+
+# LDAP objectclass for projects. (string value)
+# Deprecated group/name - [ldap]/tenant_objectclass
+#project_objectclass = groupOfNames
+
+# LDAP attribute mapped to project id. (string value)
+# Deprecated group/name - [ldap]/tenant_id_attribute
+#project_id_attribute = cn
+
+# LDAP attribute mapped to project membership for user. (string value)
+# Deprecated group/name - [ldap]/tenant_member_attribute
+#project_member_attribute = member
+
+# LDAP attribute mapped to project name. (string value)
+# Deprecated group/name - [ldap]/tenant_name_attribute
+#project_name_attribute = ou
+
+# LDAP attribute mapped to project description. (string value)
+# Deprecated group/name - [ldap]/tenant_desc_attribute
+#project_desc_attribute = description
+
+# LDAP attribute mapped to project enabled. (string value)
+# Deprecated group/name - [ldap]/tenant_enabled_attribute
+#project_enabled_attribute = enabled
+
+# LDAP attribute mapped to project domain_id. (string value)
+# Deprecated group/name - [ldap]/tenant_domain_id_attribute
+#project_domain_id_attribute = businessCategory
+
+# List of attributes stripped off the project on update. (list value)
+# Deprecated group/name - [ldap]/tenant_attribute_ignore
+#project_attribute_ignore =
+
+# Allow project creation in LDAP backend. (boolean value)
+# Deprecated group/name - [ldap]/tenant_allow_create
+#project_allow_create = true
+
+# Allow project update in LDAP backend. (boolean value)
+# Deprecated group/name - [ldap]/tenant_allow_update
+#project_allow_update = true
+
+# Allow project deletion in LDAP backend. (boolean value)
+# Deprecated group/name - [ldap]/tenant_allow_delete
+#project_allow_delete = true
+
+# If true, Keystone uses an alternative method to determine if a project is
+# enabled or not by checking if they are a member of the
+# "project_enabled_emulation_dn" group. (boolean value)
+# Deprecated group/name - [ldap]/tenant_enabled_emulation
+#project_enabled_emulation = false
+
+# DN of the group entry to hold enabled projects when using enabled emulation.
+# (string value)
+# Deprecated group/name - [ldap]/tenant_enabled_emulation_dn
+#project_enabled_emulation_dn = <None>
+
+# Additional attribute mappings for projects. Attribute mapping format is
+# <ldap_attr>:<user_attr>, where ldap_attr is the attribute in the LDAP entry
+# and user_attr is the Identity API attribute. (list value)
+# Deprecated group/name - [ldap]/tenant_additional_attribute_mapping
+#project_additional_attribute_mapping =
+
+# Search base for roles. (string value)
+#role_tree_dn = <None>
+
+# LDAP search filter for roles. (string value)
+#role_filter = <None>
+
+# LDAP objectclass for roles. (string value)
+#role_objectclass = organizationalRole
+
+# LDAP attribute mapped to role id. (string value)
+#role_id_attribute = cn
+
+# LDAP attribute mapped to role name. (string value)
+#role_name_attribute = ou
+
+# LDAP attribute mapped to role membership. (string value)
+#role_member_attribute = roleOccupant
+
+# List of attributes stripped off the role on update. (list value)
+#role_attribute_ignore =
+
+# Allow role creation in LDAP backend. (boolean value)
+#role_allow_create = true
+
+# Allow role update in LDAP backend. (boolean value)
+#role_allow_update = true
+
+# Allow role deletion in LDAP backend. (boolean value)
+#role_allow_delete = true
+
+# Additional attribute mappings for roles. Attribute mapping format is
+# <ldap_attr>:<user_attr>, where ldap_attr is the attribute in the LDAP entry
+# and user_attr is the Identity API attribute. (list value)
+#role_additional_attribute_mapping =
+
+# Search base for groups. (string value)
+#group_tree_dn = <None>
+
+# LDAP search filter for groups. (string value)
+#group_filter = <None>
+
+# LDAP objectclass for groups. (string value)
+#group_objectclass = groupOfNames
+
+# LDAP attribute mapped to group id. (string value)
+#group_id_attribute = cn
+
+# LDAP attribute mapped to group name. (string value)
+#group_name_attribute = ou
+
+# LDAP attribute mapped to show group membership. (string value)
+#group_member_attribute = member
+
+# LDAP attribute mapped to group description. (string value)
+#group_desc_attribute = description
+
+# List of attributes stripped off the group on update. (list value)
+#group_attribute_ignore =
+
+# Allow group creation in LDAP backend. (boolean value)
+#group_allow_create = true
+
+# Allow group update in LDAP backend. (boolean value)
+#group_allow_update = true
+
+# Allow group deletion in LDAP backend. (boolean value)
+#group_allow_delete = true
+
+# Additional attribute mappings for groups. Attribute mapping format is
+# <ldap_attr>:<user_attr>, where ldap_attr is the attribute in the LDAP entry
+# and user_attr is the Identity API attribute. (list value)
+#group_additional_attribute_mapping =
+
+# CA certificate file path for communicating with LDAP servers. (string value)
+#tls_cacertfile = <None>
+
+# CA certificate directory path for communicating with LDAP servers. (string
+# value)
+#tls_cacertdir = <None>
+
+# Enable TLS for communicating with LDAP servers. (boolean value)
+#use_tls = false
+
+# Valid options for tls_req_cert are demand, never, and allow. (string value)
+#tls_req_cert = demand
+
+# Enable LDAP connection pooling. (boolean value)
+#use_pool = false
+
+# Connection pool size. (integer value)
+#pool_size = 10
+
+# Maximum count of reconnect trials. (integer value)
+#pool_retry_max = 3
+
+# Time span in seconds to wait between two reconnect trials. (floating point
+# value)
+#pool_retry_delay = 0.1
+
+# Connector timeout in seconds. Value -1 indicates indefinite wait for
+# response. (integer value)
+#pool_connection_timeout = -1
+
+# Connection lifetime in seconds. (integer value)
+#pool_connection_lifetime = 600
+
+# Enable LDAP connection pooling for end user authentication. If use_pool is
+# disabled, then this setting is meaningless and is not used at all. (boolean
+# value)
+#use_auth_pool = false
+
+# End user auth connection pool size. (integer value)
+#auth_pool_size = 100
+
+# End user auth connection lifetime in seconds. (integer value)
+#auth_pool_connection_lifetime = 60
+
+
+[matchmaker_redis]
+
+#
+# From oslo.messaging
+#
+
+# Host to locate redis. (string value)
+#host = 127.0.0.1
+
+# Use this port to connect to redis host. (integer value)
+#port = 6379
+
+# Password for Redis server (optional). (string value)
+#password = <None>
+
+
+[matchmaker_ring]
+
+#
+# From oslo.messaging
+#
+
+# Matchmaker ring file (JSON). (string value)
+# Deprecated group/name - [DEFAULT]/matchmaker_ringfile
+#ringfile = /etc/oslo/matchmaker_ring.json
+
+
+[memcache]
+
+#
+# From keystone
+#
+
+# Memcache servers in the format of "host:port". (list value)
+#servers = localhost:11211
+{%- if server.cache is defined %}
+{%- if server.cache.members is defined %}
+servers = {%- for member in server.cache.members %}{{ member.host }}:{{ member.port }}{% if not loop.last %},{% endif %}{%- endfor %}
+{%- else %}
+servers = ['{{ server.cache.host }}:{{ server.cache.port }}']
+{%- endif %}
+{%- endif %}
+
+# Number of seconds memcached server is considered dead before it is tried
+# again. This is used by the key value store system (e.g. token pooled
+# memcached persistence backend). (integer value)
+#dead_retry = 300
+
+# Timeout in seconds for every call to a server. This is used by the key value
+# store system (e.g. token pooled memcached persistence backend). (integer
+# value)
+#socket_timeout = 3
+
+# Max total number of open connections to every memcached server. This is used
+# by the key value store system (e.g. token pooled memcached persistence
+# backend). (integer value)
+#pool_maxsize = 10
+
+# Number of seconds a connection to memcached is held unused in the pool before
+# it is closed. This is used by the key value store system (e.g. token pooled
+# memcached persistence backend). (integer value)
+#pool_unused_timeout = 60
+
+# Number of seconds that an operation will wait to get a memcache client
+# connection. This is used by the key value store system (e.g. token pooled
+# memcached persistence backend). (integer value)
+#pool_connection_get_timeout = 10
+
+
+[oauth1]
+
+#
+# From keystone
+#
+
+# Credential backend driver. (string value)
+#driver = keystone.contrib.oauth1.backends.sql.OAuth1
+
+# Duration (in seconds) for the OAuth Request Token. (integer value)
+#request_token_duration = 28800
+
+# Duration (in seconds) for the OAuth Access Token. (integer value)
+#access_token_duration = 86400
+
+
+[os_inherit]
+
+#
+# From keystone
+#
+
+# role-assignment inheritance to projects from owning domain or from projects
+# higher in the hierarchy can be optionally enabled. (boolean value)
+#enabled = false
+
+
+[oslo_messaging_amqp]
+
+#
+# From oslo.messaging
+#
+
+# address prefix used when sending to a specific server (string value)
+# Deprecated group/name - [amqp1]/server_request_prefix
+#server_request_prefix = exclusive
+
+# address prefix used when broadcasting to all servers (string value)
+# Deprecated group/name - [amqp1]/broadcast_prefix
+#broadcast_prefix = broadcast
+
+# address prefix when sending to any server in group (string value)
+# Deprecated group/name - [amqp1]/group_request_prefix
+#group_request_prefix = unicast
+
+# Name for the AMQP container (string value)
+# Deprecated group/name - [amqp1]/container_name
+#container_name = <None>
+
+# Timeout for inactive connections (in seconds) (integer value)
+# Deprecated group/name - [amqp1]/idle_timeout
+#idle_timeout = 0
+
+# Debug: dump AMQP frames to stdout (boolean value)
+# Deprecated group/name - [amqp1]/trace
+#trace = false
+
+# CA certificate PEM file for verifing server certificate (string value)
+# Deprecated group/name - [amqp1]/ssl_ca_file
+#ssl_ca_file =
+
+# Identifying certificate PEM file to present to clients (string value)
+# Deprecated group/name - [amqp1]/ssl_cert_file
+#ssl_cert_file =
+
+# Private key PEM file used to sign cert_file certificate (string value)
+# Deprecated group/name - [amqp1]/ssl_key_file
+#ssl_key_file =
+
+# Password for decrypting ssl_key_file (if encrypted) (string value)
+# Deprecated group/name - [amqp1]/ssl_key_password
+#ssl_key_password = <None>
+
+# Accept clients using either SSL or plain TCP (boolean value)
+# Deprecated group/name - [amqp1]/allow_insecure_clients
+#allow_insecure_clients = false
+
+
+[oslo_messaging_qpid]
+
+#
+# From oslo.messaging
+#
+
+# Use durable queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
+#amqp_durable_queues = false
+
+# Auto-delete queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/amqp_auto_delete
+#amqp_auto_delete = false
+
+# Size of RPC connection pool. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_conn_pool_size
+#rpc_conn_pool_size = 30
+
+# Qpid broker hostname. (string value)
+# Deprecated group/name - [DEFAULT]/qpid_hostname
+#qpid_hostname = localhost
+
+# Qpid broker port. (integer value)
+# Deprecated group/name - [DEFAULT]/qpid_port
+#qpid_port = 5672
+
+# Qpid HA cluster host:port pairs. (list value)
+# Deprecated group/name - [DEFAULT]/qpid_hosts
+#qpid_hosts = $qpid_hostname:$qpid_port
+
+# Username for Qpid connection. (string value)
+# Deprecated group/name - [DEFAULT]/qpid_username
+#qpid_username =
+
+# Password for Qpid connection. (string value)
+# Deprecated group/name - [DEFAULT]/qpid_password
+#qpid_password =
+
+# Space separated list of SASL mechanisms to use for auth. (string value)
+# Deprecated group/name - [DEFAULT]/qpid_sasl_mechanisms
+#qpid_sasl_mechanisms =
+
+# Seconds between connection keepalive heartbeats. (integer value)
+# Deprecated group/name - [DEFAULT]/qpid_heartbeat
+#qpid_heartbeat = 60
+
+# Transport to use, either 'tcp' or 'ssl'. (string value)
+# Deprecated group/name - [DEFAULT]/qpid_protocol
+#qpid_protocol = tcp
+
+# Whether to disable the Nagle algorithm. (boolean value)
+# Deprecated group/name - [DEFAULT]/qpid_tcp_nodelay
+#qpid_tcp_nodelay = true
+
+# The number of prefetched messages held by receiver. (integer value)
+# Deprecated group/name - [DEFAULT]/qpid_receiver_capacity
+#qpid_receiver_capacity = 1
+
+# The qpid topology version to use.  Version 1 is what was originally used by
+# impl_qpid.  Version 2 includes some backwards-incompatible changes that allow
+# broker federation to work.  Users should update to version 2 when they are
+# able to take everything down, as it requires a clean break. (integer value)
+# Deprecated group/name - [DEFAULT]/qpid_topology_version
+#qpid_topology_version = 1
+
+
+[oslo_messaging_rabbit]
+
+#
+# From oslo.messaging
+#
+
+# Use durable queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
+#amqp_durable_queues = false
+
+# Auto-delete queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/amqp_auto_delete
+#amqp_auto_delete = false
+
+# Size of RPC connection pool. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_conn_pool_size
+#rpc_conn_pool_size = 30
+
+# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
+# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
+# distributions. (string value)
+# Deprecated group/name - [DEFAULT]/kombu_ssl_version
+#kombu_ssl_version =
+
+# SSL key file (valid only if SSL enabled). (string value)
+# Deprecated group/name - [DEFAULT]/kombu_ssl_keyfile
+#kombu_ssl_keyfile =
+
+# SSL cert file (valid only if SSL enabled). (string value)
+# Deprecated group/name - [DEFAULT]/kombu_ssl_certfile
+#kombu_ssl_certfile =
+
+# SSL certification authority file (valid only if SSL enabled). (string value)
+# Deprecated group/name - [DEFAULT]/kombu_ssl_ca_certs
+#kombu_ssl_ca_certs =
+
+# How long to wait before reconnecting in response to an AMQP consumer cancel
+# notification. (floating point value)
+# Deprecated group/name - [DEFAULT]/kombu_reconnect_delay
+#kombu_reconnect_delay = 1.0
+
+# The RabbitMQ broker address where a single node is used. (string value)
+# Deprecated group/name - [DEFAULT]/rabbit_host
+#rabbit_host = localhost
+
+# The RabbitMQ broker port where a single node is used. (integer value)
+# Deprecated group/name - [DEFAULT]/rabbit_port
+#rabbit_port = 5672
+
+# RabbitMQ HA cluster host:port pairs. (list value)
+# Deprecated group/name - [DEFAULT]/rabbit_hosts
+#rabbit_hosts = $rabbit_host:$rabbit_port
+
+# Connect over SSL for RabbitMQ. (boolean value)
+# Deprecated group/name - [DEFAULT]/rabbit_use_ssl
+#rabbit_use_ssl = false
+
+# The RabbitMQ userid. (string value)
+# Deprecated group/name - [DEFAULT]/rabbit_userid
+#rabbit_userid = guest
+
+# The RabbitMQ password. (string value)
+# Deprecated group/name - [DEFAULT]/rabbit_password
+#rabbit_password = guest
+
+# The RabbitMQ login method. (string value)
+# Deprecated group/name - [DEFAULT]/rabbit_login_method
+#rabbit_login_method = AMQPLAIN
+
+# The RabbitMQ virtual host. (string value)
+# Deprecated group/name - [DEFAULT]/rabbit_virtual_host
+#rabbit_virtual_host = /
+
+# How frequently to retry connecting with RabbitMQ. (integer value)
+#rabbit_retry_interval = 1
+
+# How long to backoff for between retries when connecting to RabbitMQ. (integer
+# value)
+# Deprecated group/name - [DEFAULT]/rabbit_retry_backoff
+#rabbit_retry_backoff = 2
+
+# Maximum number of RabbitMQ connection retries. Default is 0 (infinite retry
+# count). (integer value)
+# Deprecated group/name - [DEFAULT]/rabbit_max_retries
+#rabbit_max_retries = 0
+
+# Use HA queues in RabbitMQ (x-ha-policy: all). If you change this option, you
+# must wipe the RabbitMQ database. (boolean value)
+# Deprecated group/name - [DEFAULT]/rabbit_ha_queues
+#rabbit_ha_queues = false
+
+# Number of seconds after which the Rabbit broker is considered down if
+# heartbeat's keep-alive fails (0 disable the heartbeat). (integer value)
+#heartbeat_timeout_threshold = 60
+
+# How often times during the heartbeat_timeout_threshold we check the
+# heartbeat. (integer value)
+#heartbeat_rate = 2
+
+# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake (boolean value)
+# Deprecated group/name - [DEFAULT]/fake_rabbit
+#fake_rabbit = false
+
+
+[oslo_middleware]
+
+#
+# From oslo.middleware
+#
+
+# The maximum body size for each  request, in bytes. (integer value)
+# Deprecated group/name - [DEFAULT]/osapi_max_request_body_size
+# Deprecated group/name - [DEFAULT]/max_request_body_size
+#max_request_body_size = 114688
+
+
+[oslo_policy]
+
+#
+# From oslo.policy
+#
+
+# The JSON file that defines policies. (string value)
+# Deprecated group/name - [DEFAULT]/policy_file
+#policy_file = policy.json
+
+# Default rule. Enforced when a requested rule is not found. (string value)
+# Deprecated group/name - [DEFAULT]/policy_default_rule
+#policy_default_rule = default
+
+# Directories where policy configuration files are stored. They can be relative
+# to any directory in the search path defined by the config_dir option, or
+# absolute paths. The file defined by policy_file must exist for these
+# directories to be searched.  Missing or empty directories are ignored. (multi
+# valued)
+# Deprecated group/name - [DEFAULT]/policy_dirs
+#policy_dirs = policy.d
+
+
+[paste_deploy]
+
+#
+# From keystone
+#
+
+# Name of the paste configuration file that defines the available pipelines.
+# (string value)
+#config_file = keystone-paste.ini
+
+
+[policy]
+
+#
+# From keystone
+#
+
+# Policy backend driver. (string value)
+#driver = keystone.policy.backends.sql.Policy
+
+# Maximum number of entities that will be returned in a policy collection.
+# (integer value)
+#list_limit = <None>
+
+
+[resource]
+
+#
+# From keystone
+#
+
+# Resource backend driver. If a resource driver is not specified, the
+# assignment driver will choose the resource driver. (string value)
+#driver = <None>
+
+# Toggle for resource caching. This has no effect unless global caching is
+# enabled. (boolean value)
+# Deprecated group/name - [assignment]/caching
+#caching = true
+
+# TTL (in seconds) to cache resource data. This has no effect unless global
+# caching is enabled. (integer value)
+# Deprecated group/name - [assignment]/cache_time
+#cache_time = <None>
+
+# Maximum number of entities that will be returned in a resource collection.
+# (integer value)
+# Deprecated group/name - [assignment]/list_limit
+#list_limit = <None>
+
+
+[revoke]
+
+#
+# From keystone
+#
+
+# An implementation of the backend for persisting revocation events. (string
+# value)
+#driver = keystone.contrib.revoke.backends.sql.Revoke
+
+# This value (calculated in seconds) is added to token expiration before a
+# revocation event may be removed from the backend. (integer value)
+#expiration_buffer = 1800
+
+# Toggle for revocation event caching. This has no effect unless global caching
+# is enabled. (boolean value)
+#caching = true
+
+# Time to cache the revocation list and the revocation events (in seconds).
+# This has no effect unless global and token caching are enabled. (integer
+# value)
+# Deprecated group/name - [token]/revocation_cache_time
+#cache_time = 3600
+
+
+[role]
+
+#
+# From keystone
+#
+
+# Role backend driver. (string value)
+#driver = <None>
+
+# Toggle for role caching. This has no effect unless global caching is enabled.
+# (boolean value)
+#caching = true
+
+# TTL (in seconds) to cache role data. This has no effect unless global caching
+# is enabled. (integer value)
+#cache_time = <None>
+
+# Maximum number of entities that will be returned in a role collection.
+# (integer value)
+#list_limit = <None>
+
+
+[saml]
+
+#
+# From keystone
+#
+
+# Default TTL, in seconds, for any generated SAML assertion created by
+# Keystone. (integer value)
+#assertion_expiration_time = 3600
+
+# Binary to be called for XML signing. Install the appropriate package, specify
+# absolute path or adjust your PATH environment variable if the binary cannot
+# be found. (string value)
+#xmlsec1_binary = xmlsec1
+
+# Path of the certfile for SAML signing. For non-production environments, you
+# may be interested in using `keystone-manage pki_setup` to generate self-
+# signed certificates. Note, the path cannot contain a comma. (string value)
+#certfile = /etc/keystone/ssl/certs/signing_cert.pem
+
+# Path of the keyfile for SAML signing. Note, the path cannot contain a comma.
+# (string value)
+#keyfile = /etc/keystone/ssl/private/signing_key.pem
+
+# Entity ID value for unique Identity Provider identification. Usually FQDN is
+# set with a suffix. A value is required to generate IDP Metadata. For example:
+# https://keystone.example.com/v3/OS-FEDERATION/saml2/idp (string value)
+#idp_entity_id = <None>
+
+# Identity Provider Single-Sign-On service value, required in the Identity
+# Provider's metadata. A value is required to generate IDP Metadata. For
+# example: https://keystone.example.com/v3/OS-FEDERATION/saml2/sso (string
+# value)
+#idp_sso_endpoint = <None>
+
+# Language used by the organization. (string value)
+#idp_lang = en
+
+# Organization name the installation belongs to. (string value)
+#idp_organization_name = <None>
+
+# Organization name to be displayed. (string value)
+#idp_organization_display_name = <None>
+
+# URL of the organization. (string value)
+#idp_organization_url = <None>
+
+# Company of contact person. (string value)
+#idp_contact_company = <None>
+
+# Given name of contact person (string value)
+#idp_contact_name = <None>
+
+# Surname of contact person. (string value)
+#idp_contact_surname = <None>
+
+# Email address of contact person. (string value)
+#idp_contact_email = <None>
+
+# Telephone number of contact person. (string value)
+#idp_contact_telephone = <None>
+
+# Contact type. Allowed values are: technical, support, administrative billing,
+# and other (string value)
+#idp_contact_type = other
+
+# Path to the Identity Provider Metadata file. This file should be generated
+# with the keystone-manage saml_idp_metadata command. (string value)
+#idp_metadata_path = /etc/keystone/saml2_idp_metadata.xml
+
+# The prefix to use for the RelayState SAML attribute, used when generating ECP
+# wrapped assertions. (string value)
+#relay_state_prefix = ss:mem:
+
+
+[signing]
+
+#
+# From keystone
+#
+
+# Path of the certfile for token signing. For non-production environments, you
+# may be interested in using `keystone-manage pki_setup` to generate self-
+# signed certificates. (string value)
+#certfile = /etc/keystone/ssl/certs/signing_cert.pem
+
+# Path of the keyfile for token signing. (string value)
+#keyfile = /etc/keystone/ssl/private/signing_key.pem
+
+# Path of the CA for token signing. (string value)
+#ca_certs = /etc/keystone/ssl/certs/ca.pem
+
+# Path of the CA key for token signing. (string value)
+#ca_key = /etc/keystone/ssl/private/cakey.pem
+
+# Key size (in bits) for token signing cert (auto generated certificate).
+# (integer value)
+#key_size = 2048
+
+# Days the token signing cert is valid for (auto generated certificate).
+# (integer value)
+#valid_days = 3650
+
+# Certificate subject (auto generated certificate) for token signing. (string
+# value)
+#cert_subject = /C=US/ST=Unset/L=Unset/O=Unset/CN=www.example.com
+
+
+[ssl]
+
+#
+# From keystone
+#
+
+# Path of the CA key file for SSL. (string value)
+#ca_key = /etc/keystone/ssl/private/cakey.pem
+
+# SSL key length (in bits) (auto generated certificate). (integer value)
+#key_size = 1024
+
+# Days the certificate is valid for once signed (auto generated certificate).
+# (integer value)
+#valid_days = 3650
+
+# SSL certificate subject (auto generated certificate). (string value)
+#cert_subject = /C=US/ST=Unset/L=Unset/O=Unset/CN=localhost
+
+
+[token]
+
+#
+# From keystone
+#
+
+# External auth mechanisms that should add bind information to token, e.g.,
+# kerberos,x509. (list value)
+#bind =
+
+# Enforcement policy on tokens presented to Keystone with bind information. One
+# of disabled, permissive, strict, required or a specifically required bind
+# mode, e.g., kerberos or x509 to require binding to that authentication.
+# (string value)
+#enforce_token_bind = permissive
+
+# Amount of time a token should remain valid (in seconds). (integer value)
+#expiration = 3600
+expiration = 43200
+# Controls the token construction, validation, and revocation operations. Core
+# providers are "keystone.token.providers.[fernet|pkiz|pki|uuid].Provider".
+# (string value)
+#provider = keystone.token.providers.uuid.Provider
+{% if server.tokens.engine == 'fernet' %}
+provider = keystone.token.providers.fernet.Provider
+{% endif %}
+# Token persistence backend driver. (string value)
+#driver = keystone.token.persistence.backends.sql.Token
+driver=keystone.token.persistence.backends.memcache_pool.Token
+
+# Toggle for token system caching. This has no effect unless global caching is
+# enabled. (boolean value)
+#caching = true
+
+# Time to cache tokens (in seconds). This has no effect unless global and token
+# caching are enabled. (integer value)
+#cache_time = <None>
+
+# Revoke token by token identifier. Setting revoke_by_id to true enables
+# various forms of enumerating tokens, e.g. `list tokens for user`. These
+# enumerations are processed to determine the list of tokens to revoke. Only
+# disable if you are switching to using the Revoke extension with a backend
+# other than KVS, which stores events in memory. (boolean value)
+#revoke_by_id = true
+
+# Allow rescoping of scoped token. Setting allow_rescoped_scoped_token to false
+# prevents a user from exchanging a scoped token for any other token. (boolean
+# value)
+#allow_rescope_scoped_token = true
+
+# The hash algorithm to use for PKI tokens. This can be set to any algorithm
+# that hashlib supports. WARNING: Before changing this value, the auth_token
+# middleware must be configured with the hash_algorithms, otherwise token
+# revocation will not be processed correctly. (string value)
+#hash_algorithm = md5
+
+
+[trust]
+
+#
+# From keystone
+#
+
+# Delegation and impersonation features can be optionally disabled. (boolean
+# value)
+#enabled = true
+
+# Enable redelegation feature. (boolean value)
+#allow_redelegation = false
+
+# Maximum depth of trust redelegation. (integer value)
+#max_redelegation_count = 3
+
+# Trust backend driver. (string value)
+#driver = keystone.trust.backends.sql.Trust
+
+
+[extra_headers]
+Distribution = Ubuntu
diff --git a/keystone/files/kilo/policy-v2.json b/keystone/files/kilo/policy-v2.json
new file mode 100644
index 0000000..2b88c53
--- /dev/null
+++ b/keystone/files/kilo/policy-v2.json
@@ -0,0 +1,184 @@
+{
+    "admin_required": "role:admin or is_admin:1",
+    "service_role": "role:service",
+    "service_or_admin": "rule:admin_required or rule:service_role",
+    "owner" : "user_id:%(user_id)s",
+    "admin_or_owner": "rule:admin_required or rule:owner",
+    "token_subject": "user_id:%(target.token.user_id)s",
+    "admin_or_token_subject": "rule:admin_required or rule:token_subject",
+    "service_admin_or_token_subject": "rule:service_or_admin or rule:token_subject",
+
+    "default": "rule:admin_required",
+
+    "identity:get_region": "",
+    "identity:list_regions": "",
+    "identity:create_region": "rule:admin_required",
+    "identity:update_region": "rule:admin_required",
+    "identity:delete_region": "rule:admin_required",
+
+    "identity:get_service": "rule:admin_required",
+    "identity:list_services": "rule:admin_required",
+    "identity:create_service": "rule:admin_required",
+    "identity:update_service": "rule:admin_required",
+    "identity:delete_service": "rule:admin_required",
+
+    "identity:get_endpoint": "rule:admin_required",
+    "identity:list_endpoints": "rule:admin_required",
+    "identity:create_endpoint": "rule:admin_required",
+    "identity:update_endpoint": "rule:admin_required",
+    "identity:delete_endpoint": "rule:admin_required",
+
+    "identity:get_domain": "rule:admin_required",
+    "identity:list_domains": "rule:admin_required",
+    "identity:create_domain": "rule:admin_required",
+    "identity:update_domain": "rule:admin_required",
+    "identity:delete_domain": "rule:admin_required",
+
+    "identity:get_project": "rule:admin_required",
+    "identity:list_projects": "rule:admin_required",
+    "identity:list_user_projects": "rule:admin_or_owner",
+    "identity:create_project": "rule:admin_required",
+    "identity:update_project": "rule:admin_required",
+    "identity:delete_project": "rule:admin_required",
+
+    "identity:get_user": "rule:admin_required",
+    "identity:list_users": "rule:admin_required",
+    "identity:create_user": "rule:admin_required",
+    "identity:update_user": "rule:admin_required",
+    "identity:delete_user": "rule:admin_required",
+    "identity:change_password": "rule:admin_or_owner",
+
+    "identity:get_group": "rule:admin_required",
+    "identity:list_groups": "rule:admin_required",
+    "identity:list_groups_for_user": "rule:admin_or_owner",
+    "identity:create_group": "rule:admin_required",
+    "identity:update_group": "rule:admin_required",
+    "identity:delete_group": "rule:admin_required",
+    "identity:list_users_in_group": "rule:admin_required",
+    "identity:remove_user_from_group": "rule:admin_required",
+    "identity:check_user_in_group": "rule:admin_required",
+    "identity:add_user_to_group": "rule:admin_required",
+
+    "identity:get_credential": "rule:admin_required",
+    "identity:list_credentials": "rule:admin_required",
+    "identity:create_credential": "rule:admin_required",
+    "identity:update_credential": "rule:admin_required",
+    "identity:delete_credential": "rule:admin_required",
+
+    "identity:ec2_get_credential": "rule:admin_required or (rule:owner and user_id:%(target.credential.user_id)s)",
+    "identity:ec2_list_credentials": "rule:admin_or_owner",
+    "identity:ec2_create_credential": "rule:admin_or_owner",
+    "identity:ec2_delete_credential": "rule:admin_required or (rule:owner and user_id:%(target.credential.user_id)s)",
+
+    "identity:get_role": "rule:admin_required",
+    "identity:list_roles": "rule:admin_required",
+    "identity:create_role": "rule:admin_required",
+    "identity:update_role": "rule:admin_required",
+    "identity:delete_role": "rule:admin_required",
+
+    "identity:check_grant": "rule:admin_required",
+    "identity:list_grants": "rule:admin_required",
+    "identity:create_grant": "rule:admin_required",
+    "identity:revoke_grant": "rule:admin_required",
+
+    "identity:list_role_assignments": "rule:admin_required",
+
+    "identity:get_policy": "rule:admin_required",
+    "identity:list_policies": "rule:admin_required",
+    "identity:create_policy": "rule:admin_required",
+    "identity:update_policy": "rule:admin_required",
+    "identity:delete_policy": "rule:admin_required",
+
+    "identity:check_token": "rule:admin_or_token_subject",
+    "identity:validate_token": "rule:service_admin_or_token_subject",
+    "identity:validate_token_head": "rule:service_or_admin",
+    "identity:revocation_list": "rule:service_or_admin",
+    "identity:revoke_token": "rule:admin_or_token_subject",
+
+    "identity:create_trust": "user_id:%(trust.trustor_user_id)s",
+    "identity:list_trusts": "",
+    "identity:list_roles_for_trust": "",
+    "identity:get_role_for_trust": "",
+    "identity:delete_trust": "",
+
+    "identity:create_consumer": "rule:admin_required",
+    "identity:get_consumer": "rule:admin_required",
+    "identity:list_consumers": "rule:admin_required",
+    "identity:delete_consumer": "rule:admin_required",
+    "identity:update_consumer": "rule:admin_required",
+
+    "identity:authorize_request_token": "rule:admin_required",
+    "identity:list_access_token_roles": "rule:admin_required",
+    "identity:get_access_token_role": "rule:admin_required",
+    "identity:list_access_tokens": "rule:admin_required",
+    "identity:get_access_token": "rule:admin_required",
+    "identity:delete_access_token": "rule:admin_required",
+
+    "identity:list_projects_for_endpoint": "rule:admin_required",
+    "identity:add_endpoint_to_project": "rule:admin_required",
+    "identity:check_endpoint_in_project": "rule:admin_required",
+    "identity:list_endpoints_for_project": "rule:admin_required",
+    "identity:remove_endpoint_from_project": "rule:admin_required",
+
+    "identity:create_endpoint_group": "rule:admin_required",
+    "identity:list_endpoint_groups": "rule:admin_required",
+    "identity:get_endpoint_group": "rule:admin_required",
+    "identity:update_endpoint_group": "rule:admin_required",
+    "identity:delete_endpoint_group": "rule:admin_required",
+    "identity:list_projects_associated_with_endpoint_group": "rule:admin_required",
+    "identity:list_endpoints_associated_with_endpoint_group": "rule:admin_required",
+    "identity:get_endpoint_group_in_project": "rule:admin_required",
+    "identity:list_endpoint_groups_for_project": "rule:admin_required",
+    "identity:add_endpoint_group_to_project": "rule:admin_required",
+    "identity:remove_endpoint_group_from_project": "rule:admin_required",
+
+    "identity:create_identity_provider": "rule:admin_required",
+    "identity:list_identity_providers": "rule:admin_required",
+    "identity:get_identity_providers": "rule:admin_required",
+    "identity:update_identity_provider": "rule:admin_required",
+    "identity:delete_identity_provider": "rule:admin_required",
+
+    "identity:create_protocol": "rule:admin_required",
+    "identity:update_protocol": "rule:admin_required",
+    "identity:get_protocol": "rule:admin_required",
+    "identity:list_protocols": "rule:admin_required",
+    "identity:delete_protocol": "rule:admin_required",
+
+    "identity:create_mapping": "rule:admin_required",
+    "identity:get_mapping": "rule:admin_required",
+    "identity:list_mappings": "rule:admin_required",
+    "identity:delete_mapping": "rule:admin_required",
+    "identity:update_mapping": "rule:admin_required",
+
+    "identity:create_service_provider": "rule:admin_required",
+    "identity:list_service_providers": "rule:admin_required",
+    "identity:get_service_provider": "rule:admin_required",
+    "identity:update_service_provider": "rule:admin_required",
+    "identity:delete_service_provider": "rule:admin_required",
+
+    "identity:get_auth_catalog": "",
+    "identity:get_auth_projects": "",
+    "identity:get_auth_domains": "",
+
+    "identity:list_projects_for_groups": "",
+    "identity:list_domains_for_groups": "",
+
+    "identity:list_revoke_events": "",
+
+    "identity:create_policy_association_for_endpoint": "rule:admin_required",
+    "identity:check_policy_association_for_endpoint": "rule:admin_required",
+    "identity:delete_policy_association_for_endpoint": "rule:admin_required",
+    "identity:create_policy_association_for_service": "rule:admin_required",
+    "identity:check_policy_association_for_service": "rule:admin_required",
+    "identity:delete_policy_association_for_service": "rule:admin_required",
+    "identity:create_policy_association_for_region_and_service": "rule:admin_required",
+    "identity:check_policy_association_for_region_and_service": "rule:admin_required",
+    "identity:delete_policy_association_for_region_and_service": "rule:admin_required",
+    "identity:get_policy_for_endpoint": "rule:admin_required",
+    "identity:list_endpoints_for_policy": "rule:admin_required",
+
+    "identity:create_domain_config": "rule:admin_required",
+    "identity:get_domain_config": "rule:admin_required",
+    "identity:update_domain_config": "rule:admin_required",
+    "identity:delete_domain_config": "rule:admin_required"
+}
\ No newline at end of file
diff --git a/keystone/files/kilo/policy-v3.json b/keystone/files/kilo/policy-v3.json
new file mode 100644
index 0000000..d0e3e64
--- /dev/null
+++ b/keystone/files/kilo/policy-v3.json
@@ -0,0 +1,195 @@
+{
+    "admin_required": "role:admin",
+    "cloud_admin": "rule:admin_required and domain_id:default",
+    "service_role": "role:service",
+    "service_or_admin": "rule:admin_required or rule:service_role",
+    "owner" : "user_id:%(user_id)s or user_id:%(target.token.user_id)s",
+    "admin_or_owner": "(rule:admin_required and domain_id:%(target.token.user.domain.id)s) or rule:owner",
+    "admin_or_cloud_admin": "rule:admin_required or rule:cloud_admin",
+    "admin_and_matching_domain_id": "rule:admin_required and domain_id:%(domain_id)s",
+    "service_admin_or_owner": "rule:service_or_admin or rule:owner",
+
+    "default": "rule:admin_required",
+
+    "identity:get_region": "",
+    "identity:list_regions": "",
+    "identity:create_region": "rule:cloud_admin",
+    "identity:update_region": "rule:cloud_admin",
+    "identity:delete_region": "rule:cloud_admin",
+
+    "identity:get_service": "rule:admin_or_cloud_admin",
+    "identity:list_services": "rule:admin_or_cloud_admin",
+    "identity:create_service": "rule:cloud_admin",
+    "identity:update_service": "rule:cloud_admin",
+    "identity:delete_service": "rule:cloud_admin",
+
+    "identity:get_endpoint": "rule:admin_or_cloud_admin",
+    "identity:list_endpoints": "rule:admin_or_cloud_admin",
+    "identity:create_endpoint": "rule:cloud_admin",
+    "identity:update_endpoint": "rule:cloud_admin",
+    "identity:delete_endpoint": "rule:cloud_admin",
+
+    "identity:get_domain": "rule:cloud_admin or rule:admin_and_matching_domain_id",
+    "identity:list_domains": "rule:cloud_admin",
+    "identity:create_domain": "rule:cloud_admin",
+    "identity:update_domain": "rule:cloud_admin",
+    "identity:delete_domain": "rule:cloud_admin",
+
+    "admin_and_matching_target_project_domain_id": "rule:admin_required and domain_id:%(target.project.domain_id)s",
+    "admin_and_matching_project_domain_id": "rule:admin_required and domain_id:%(project.domain_id)s",
+    "identity:get_project": "rule:cloud_admin or rule:admin_and_matching_target_project_domain_id",
+    "identity:list_projects": "rule:cloud_admin or rule:admin_and_matching_domain_id",
+    "identity:list_user_projects": "rule:owner or rule:admin_and_matching_domain_id",
+    "identity:create_project": "rule:cloud_admin or rule:admin_and_matching_project_domain_id",
+    "identity:update_project": "rule:cloud_admin or rule:admin_and_matching_target_project_domain_id",
+    "identity:delete_project": "rule:cloud_admin or rule:admin_and_matching_target_project_domain_id",
+
+    "admin_and_matching_target_user_domain_id": "rule:admin_required and domain_id:%(target.user.domain_id)s",
+    "admin_and_matching_user_domain_id": "rule:admin_required and domain_id:%(user.domain_id)s",
+    "identity:get_user": "rule:cloud_admin or rule:admin_and_matching_target_user_domain_id",
+    "identity:list_users": "rule:cloud_admin or rule:admin_and_matching_domain_id",
+    "identity:create_user": "rule:cloud_admin or rule:admin_and_matching_user_domain_id",
+    "identity:update_user": "rule:cloud_admin or rule:admin_and_matching_target_user_domain_id",
+    "identity:delete_user": "rule:cloud_admin or rule:admin_and_matching_target_user_domain_id",
+
+    "admin_and_matching_target_group_domain_id": "rule:admin_required and domain_id:%(target.group.domain_id)s",
+    "admin_and_matching_group_domain_id": "rule:admin_required and domain_id:%(group.domain_id)s",
+    "identity:get_group": "rule:cloud_admin or rule:admin_and_matching_target_group_domain_id",
+    "identity:list_groups": "rule:cloud_admin or rule:admin_and_matching_domain_id",
+    "identity:list_groups_for_user": "rule:owner or rule:admin_and_matching_domain_id",
+    "identity:create_group": "rule:cloud_admin or rule:admin_and_matching_group_domain_id",
+    "identity:update_group": "rule:cloud_admin or rule:admin_and_matching_target_group_domain_id",
+    "identity:delete_group": "rule:cloud_admin or rule:admin_and_matching_target_group_domain_id",
+    "identity:list_users_in_group": "rule:cloud_admin or rule:admin_and_matching_target_group_domain_id",
+    "identity:remove_user_from_group": "rule:cloud_admin or rule:admin_and_matching_target_group_domain_id",
+    "identity:check_user_in_group": "rule:cloud_admin or rule:admin_and_matching_target_group_domain_id",
+    "identity:add_user_to_group": "rule:cloud_admin or rule:admin_and_matching_target_group_domain_id",
+
+    "identity:get_credential": "rule:admin_required",
+    "identity:list_credentials": "rule:admin_required or user_id:%(user_id)s",
+    "identity:create_credential": "rule:admin_required",
+    "identity:update_credential": "rule:admin_required",
+    "identity:delete_credential": "rule:admin_required",
+
+    "identity:ec2_get_credential": "rule:admin_or_cloud_admin or (rule:owner and user_id:%(target.credential.user_id)s)",
+    "identity:ec2_list_credentials": "rule:admin_or_cloud_admin or rule:owner",
+    "identity:ec2_create_credential": "rule:admin_or_cloud_admin or rule:owner",
+    "identity:ec2_delete_credential": "rule:admin_or_cloud_admin or (rule:owner and user_id:%(target.credential.user_id)s)",
+
+    "identity:get_role": "rule:admin_or_cloud_admin",
+    "identity:list_roles": "rule:admin_or_cloud_admin",
+    "identity:create_role": "rule:cloud_admin",
+    "identity:update_role": "rule:cloud_admin",
+    "identity:delete_role": "rule:cloud_admin",
+
+    "domain_admin_for_grants": "rule:admin_required and (domain_id:%(domain_id)s or domain_id:%(target.project.domain_id)s)",
+    "project_admin_for_grants": "rule:admin_required and project_id:%(project_id)s",
+    "identity:check_grant": "rule:cloud_admin or rule:domain_admin_for_grants or rule:project_admin_for_grants",
+    "identity:list_grants": "rule:cloud_admin or rule:domain_admin_for_grants or rule:project_admin_for_grants",
+    "identity:create_grant": "rule:cloud_admin or rule:domain_admin_for_grants or rule:project_admin_for_grants",
+    "identity:revoke_grant": "rule:cloud_admin or rule:domain_admin_for_grants or rule:project_admin_for_grants",
+
+    "admin_on_domain_filter" : "rule:admin_required and domain_id:%(scope.domain.id)s",
+    "admin_on_project_filter" : "rule:admin_required and project_id:%(scope.project.id)s",
+    "identity:list_role_assignments": "rule:cloud_admin or rule:admin_on_domain_filter or rule:admin_on_project_filter",
+
+    "identity:get_policy": "rule:cloud_admin",
+    "identity:list_policies": "rule:cloud_admin",
+    "identity:create_policy": "rule:cloud_admin",
+    "identity:update_policy": "rule:cloud_admin",
+    "identity:delete_policy": "rule:cloud_admin",
+
+    "identity:change_password": "rule:owner",
+    "identity:check_token": "rule:admin_or_owner",
+    "identity:validate_token": "rule:service_admin_or_owner",
+    "identity:validate_token_head": "rule:service_or_admin",
+    "identity:revocation_list": "rule:service_or_admin",
+    "identity:revoke_token": "rule:admin_or_owner",
+
+    "identity:create_trust": "user_id:%(trust.trustor_user_id)s",
+    "identity:list_trusts": "",
+    "identity:list_roles_for_trust": "",
+    "identity:get_role_for_trust": "",
+    "identity:delete_trust": "",
+
+    "identity:create_consumer": "rule:admin_required",
+    "identity:get_consumer": "rule:admin_required",
+    "identity:list_consumers": "rule:admin_required",
+    "identity:delete_consumer": "rule:admin_required",
+    "identity:update_consumer": "rule:admin_required",
+
+    "identity:authorize_request_token": "rule:admin_required",
+    "identity:list_access_token_roles": "rule:admin_required",
+    "identity:get_access_token_role": "rule:admin_required",
+    "identity:list_access_tokens": "rule:admin_required",
+    "identity:get_access_token": "rule:admin_required",
+    "identity:delete_access_token": "rule:admin_required",
+
+    "identity:list_projects_for_endpoint": "rule:admin_required",
+    "identity:add_endpoint_to_project": "rule:admin_required",
+    "identity:check_endpoint_in_project": "rule:admin_required",
+    "identity:list_endpoints_for_project": "rule:admin_required",
+    "identity:remove_endpoint_from_project": "rule:admin_required",
+
+    "identity:create_endpoint_group": "rule:admin_required",
+    "identity:list_endpoint_groups": "rule:admin_required",
+    "identity:get_endpoint_group": "rule:admin_required",
+    "identity:update_endpoint_group": "rule:admin_required",
+    "identity:delete_endpoint_group": "rule:admin_required",
+    "identity:list_projects_associated_with_endpoint_group": "rule:admin_required",
+    "identity:list_endpoints_associated_with_endpoint_group": "rule:admin_required",
+    "identity:get_endpoint_group_in_project": "rule:admin_required",
+    "identity:list_endpoint_groups_for_project": "rule:admin_required",
+    "identity:add_endpoint_group_to_project": "rule:admin_required",
+    "identity:remove_endpoint_group_from_project": "rule:admin_required",
+
+    "identity:create_identity_provider": "rule:cloud_admin",
+    "identity:list_identity_providers": "rule:cloud_admin",
+    "identity:get_identity_providers": "rule:cloud_admin",
+    "identity:update_identity_provider": "rule:cloud_admin",
+    "identity:delete_identity_provider": "rule:cloud_admin",
+
+    "identity:create_protocol": "rule:cloud_admin",
+    "identity:update_protocol": "rule:cloud_admin",
+    "identity:get_protocol": "rule:cloud_admin",
+    "identity:list_protocols": "rule:cloud_admin",
+    "identity:delete_protocol": "rule:cloud_admin",
+
+    "identity:create_mapping": "rule:cloud_admin",
+    "identity:get_mapping": "rule:cloud_admin",
+    "identity:list_mappings": "rule:cloud_admin",
+    "identity:delete_mapping": "rule:cloud_admin",
+    "identity:update_mapping": "rule:cloud_admin",
+
+    "identity:create_service_provider": "rule:cloud_admin",
+    "identity:list_service_providers": "rule:cloud_admin",
+    "identity:get_service_provider": "rule:cloud_admin",
+    "identity:update_service_provider": "rule:cloud_admin",
+    "identity:delete_service_provider": "rule:cloud_admin",
+
+    "identity:get_auth_catalog": "",
+    "identity:get_auth_projects": "",
+    "identity:get_auth_domains": "",
+
+    "identity:list_projects_for_groups": "",
+    "identity:list_domains_for_groups": "",
+
+    "identity:list_revoke_events": "",
+
+    "identity:create_policy_association_for_endpoint": "rule:cloud_admin",
+    "identity:check_policy_association_for_endpoint": "rule:cloud_admin",
+    "identity:delete_policy_association_for_endpoint": "rule:cloud_admin",
+    "identity:create_policy_association_for_service": "rule:cloud_admin",
+    "identity:check_policy_association_for_service": "rule:cloud_admin",
+    "identity:delete_policy_association_for_service": "rule:cloud_admin",
+    "identity:create_policy_association_for_region_and_service": "rule:cloud_admin",
+    "identity:check_policy_association_for_region_and_service": "rule:cloud_admin",
+    "identity:delete_policy_association_for_region_and_service": "rule:cloud_admin",
+    "identity:get_policy_for_endpoint": "rule:cloud_admin",
+    "identity:list_endpoints_for_policy": "rule:cloud_admin",
+
+    "identity:create_domain_config": "rule:cloud_admin",
+    "identity:get_domain_config": "rule:cloud_admin",
+    "identity:update_domain_config": "rule:cloud_admin",
+    "identity:delete_domain_config": "rule:cloud_admin"
+}
\ No newline at end of file
diff --git a/keystone/files/sensu.conf b/keystone/files/sensu.conf
new file mode 100644
index 0000000..282fa3c
--- /dev/null
+++ b/keystone/files/sensu.conf
@@ -0,0 +1,12 @@
+local_keystone_server_proc:
+  command: "PATH=$PATH:/usr/lib64/nagios/plugins:/usr/lib/nagios/plugins check_procs -C keystone-all -u keystone -c 1:20"
+  interval: 60
+  occurrences: 1
+  subscribers:
+  - local-keystone-server
+remote_keystone_server_api:
+  command: "PATH=$PATH:/usr/local/bin oschecks-check_keystone_api --os-auth-url='http://:::openstack.host:::::::openstack.port:::/v2.0' --os-username :::openstack.user::: --os-password :::openstack.password::: --tenant :::openstack.tenant:::"
+  interval: 300
+  occurrences: 1
+  subscribers:
+  - remote-network
\ No newline at end of file
diff --git a/keystone/init.sls b/keystone/init.sls
new file mode 100644
index 0000000..adb2f15
--- /dev/null
+++ b/keystone/init.sls
@@ -0,0 +1,11 @@
+
+include:
+{% if pillar.keystone.server is defined %}
+- keystone.server
+{% endif %}
+{% if pillar.keystone.client is defined %}
+- keystone.client
+{% endif %}
+{% if pillar.keystone.control is defined %}
+- keystone.control
+{% endif %}
diff --git a/keystone/map.jinja b/keystone/map.jinja
new file mode 100644
index 0000000..31c1c49
--- /dev/null
+++ b/keystone/map.jinja
@@ -0,0 +1,48 @@
+
+{% set server = salt['grains.filter_by']({
+    'Debian': {
+        'pkgs': ['keystone', 'python-keystone', 'python-keystoneclient', 'python-psycopg2', 'python-mysqldb', 'mysql-client', 'python-six', 'python-memcache', 'python-openstackclient'],
+        'service_name': 'keystone',
+        'version': 'icehouse',
+        'api_version': '2',
+        'tokens': {
+          'engine': 'database',
+          'expiration': '86400'
+        },
+        'notification': False,
+        'roles': ['admin', 'Member']
+    },
+    'RedHat': {
+        'pkgs': ['openstack-keystone', 'openstack-utils', 'python-keystone', 'python-keystoneclient'],
+        'service_name': 'openstack-keystone',
+        'api_version': '2',
+        'version': 'icehouse',
+        'tokens': {
+          'engine': 'database',
+          'expiration': '86400'
+        },
+        'notification': False,
+        'roles': ['admin', 'Member']
+    },
+}, merge=salt['pillar.get']('keystone:server')) %}
+
+{% set client = salt['grains.filter_by']({
+    'Debian': {
+        'pkgs': ['python-keystoneclient', 'python-openstackclient'],
+        'service': 'keystone',
+        'roles': ['admin', 'Member'],
+    },
+    'RedHat': {
+        'pkgs': ['python-keystoneclient'],
+        'roles': ['admin', 'Member'],
+    },
+}, merge=salt['pillar.get']('keystone:client')) %}
+
+{% set control = salt['grains.filter_by']({
+    'Debian': {
+        'pkgs': [],
+    },
+    'RedHat': {
+        'pkgs': [],
+    },
+}, merge=salt['pillar.get']('keystone:control')) %}
diff --git a/keystone/server.sls b/keystone/server.sls
new file mode 100644
index 0000000..5fd8a31
--- /dev/null
+++ b/keystone/server.sls
@@ -0,0 +1,203 @@
+{%- from "keystone/map.jinja" import server with context %}
+{%- if server.enabled %}
+
+keystone_packages:
+  pkg.installed:
+  - names: {{ server.pkgs }}
+
+{%- if not salt['user.info']('keystone') %}
+
+keystone_user:
+  user.present:
+    - name: keystone
+    - home: /var/lib/keystone
+    - uid: 301
+    - gid: 301
+    - shell: /bin/false
+    - system: True
+    - require_in:
+      - pkg: keystone_packages
+
+keystone_group:
+  group.present:
+    - name: keystone
+    - gid: 301
+    - system: True
+    - require_in:
+      - pkg: keystone_packages
+      - user: keystone_user
+
+{%- endif %}
+
+/etc/keystone/keystone.conf:
+  file.managed:
+  - source: salt://keystone/files/{{ server.version }}/keystone.conf.{{ grains.os_family }}
+  - template: jinja
+  - require:
+    - pkg: keystone_packages
+
+
+/etc/keystone/keystone-paste.ini:
+  file.managed:
+  - source: salt://keystone/files/{{ server.version }}/keystone-paste.ini.{{ grains.os_family }}
+  - template: jinja
+  - require:
+    - pkg: keystone_packages
+  - watch_in:
+    - service: keystone_service
+
+/etc/keystone/policy.json:
+  file.managed:
+  - source: salt://keystone/files/{{ server.version }}/policy-v{{ server.api_version }}.json
+  - require:
+    - pkg: keystone_packages
+  - watch_in:
+    - service: keystone_service
+
+keystone_service:
+  service.running:
+  - name: {{ server.service_name }}
+  - enable: True
+  - watch:
+    - file: /etc/keystone/keystone.conf
+
+/root/keystonerc:
+  file.managed:
+  - source: salt://keystone/files/keystonerc
+  - template: jinja
+  - require:
+    - pkg: keystone_packages
+
+/root/keystonercv3:
+  file.managed:
+  - source: salt://keystone/files/keystonercv3
+  - template: jinja
+  - require:
+    - pkg: keystone_packages
+
+keystone_syncdb:
+  cmd.run:
+  - name: keystone-manage db_sync
+  - require:
+    - service: keystone_service
+
+{% if server.tokens.engine == 'fernet' %}
+
+/etc/keystone/fernet-keys:
+  file.directory:
+  - mode: 755
+  - user: keystone
+  - group: keystone
+  - require:
+    - pkg: keystone_packages
+  - require_in:
+    - service: keystone_fernet_setup
+
+keystone_fernet_setup:
+  cmd.run:
+  - name: keystone-manage fernet_setup --keystone-user keystone --keystone-group keystone
+  - require:
+    - service: keystone_service
+
+{% endif %}
+
+keystone_service_tenant:
+  keystone.tenant_present:
+  - name: {{ server.service_tenant }}
+  - require:
+    - cmd: keystone_syncdb
+
+keystone_admin_tenant:
+  keystone.tenant_present:
+  - name: {{ server.admin_tenant }}
+  - require:
+    - keystone: keystone_service_tenant
+
+keystone_roles:
+  keystone.role_present:
+  - names: {{ server.roles }}
+  - require:
+    - keystone: keystone_service_tenant
+
+keystone_admin_user:
+  keystone.user_present:
+  - name: {{ server.admin_name }}
+  - password: {{ server.admin_password }}
+  - email: {{ server.admin_email }}
+  - tenant: {{ server.admin_tenant }}
+  - roles:
+      {{ server.admin_tenant }}:
+      - admin
+  - require:
+    - keystone: keystone_admin_tenant
+    - keystone: keystone_roles
+
+{% for service_name, service in server.get('service', {}).iteritems() %}
+
+keystone_{{ service_name }}_service:
+  keystone.service_present:
+  - name: {{ service_name }}
+  - service_type: {{ service.type }}
+  - description: {{ service.description }}
+  - require:
+    - keystone: keystone_roles
+
+keystone_{{ service_name }}_endpoint:
+  keystone.endpoint_present:
+  - name: {{ service_name }}
+  - publicurl: '{{ service.bind.get('public_protocol', 'http') }}://{{ service.bind.public_address }}:{{ service.bind.public_port }}{{ service.bind.public_path }}'
+  - internalurl: '{{ service.bind.get('internal_protocol', 'http') }}://{{ service.bind.internal_address }}:{{ service.bind.internal_port }}{{ service.bind.internal_path }}'
+  - adminurl: '{{ service.bind.get('admin_protocol', 'http') }}://{{ service.bind.admin_address }}:{{ service.bind.admin_port }}{{ service.bind.admin_path }}'
+  - region: {{ service.get('region', 'RegionOne') }}
+  - require:
+    - keystone: keystone_{{ service_name }}_service
+
+{% if service.user is defined %}
+
+keystone_user_{{ service.user.name }}:
+  keystone.user_present:
+  - name: {{ service.user.name }}
+  - password: {{ service.user.password }}
+  - email: {{ server.admin_email }}
+  - tenant: {{ server.service_tenant }}
+  - roles:
+      {{ server.service_tenant }}:
+      - admin
+  - require:
+    - keystone: keystone_roles
+
+{% endif %}
+
+{% endfor %}
+
+{%- for tenant_name, tenant in server.get('tenant', {}).iteritems() %}
+
+keystone_tenant_{{ tenant_name }}:
+  keystone.tenant_present:
+  - name: {{ tenant_name }}
+  - require:
+    - keystone: keystone_roles
+
+{%- for user_name, user in tenant.get('user', {}).iteritems() %}
+
+keystone_user_{{ user_name }}:
+  keystone.user_present:
+  - name: {{ user_name }}
+  - password: {{ user.password }}
+  - email: {{ user.get('email', 'root@localhost') }}
+  - tenant: {{ tenant_name }}
+  - roles:
+      {{ tenant_name }}:
+      {%- if user.get('roles', False) %}
+      {{ user.roles }}
+      {%- else %}
+      - Member
+      {%- endif %}
+  - require:
+    - keystone: keystone_tenant_{{ tenant_name }}
+
+{%- endfor %}
+
+{%- endfor %}
+
+{%- endif %}
diff --git a/metadata/service/client/init.yml b/metadata/service/client/init.yml
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/metadata/service/client/init.yml
diff --git a/metadata/service/server/cluster.yml b/metadata/service/server/cluster.yml
new file mode 100644
index 0000000..f1e7f03
--- /dev/null
+++ b/metadata/service/server/cluster.yml
@@ -0,0 +1,41 @@
+applications:
+- keystone
+parameters:
+  _param:
+    mysql_keystone_password: password
+  keystone:
+    server:
+      enabled: true
+      version: ${_param:keystone_version}
+      service_token: ${_param:keystone_service_token}
+      service_tenant: service
+      admin_tenant: admin
+      admin_name: admin
+      admin_password: ${_param:keystone_admin_password}
+      admin_email: root@domain.com
+      bind:
+        address: ${_param:cluster_local_address}
+        private_address: ${_param:cluster_vip_address}
+        private_port: 35357
+        public_address: ${_param:cluster_vip_address}
+        public_port: 5000
+      region: RegionOne
+      database:
+        engine: mysql
+        host: ${_param:cluster_vip_address}
+        name: keystone
+        password: ${_param:mysql_keystone_password}
+        user: keystone
+      tokens:
+        engine: cache
+        expiration: 86400
+        location: /etc/keystone/fernet-keys/
+      cache:
+        engine: memcached
+        members: 
+        - host: ${_param:cluster_node01_address}
+          port: 11211
+        - host: ${_param:cluster_node02_address}
+          port: 11211
+        - host: ${_param:cluster_node03_address}
+          port: 11211
\ No newline at end of file
diff --git a/metadata/service/server/single.yml b/metadata/service/server/single.yml
new file mode 100644
index 0000000..5ba48d9
--- /dev/null
+++ b/metadata/service/server/single.yml
@@ -0,0 +1,37 @@
+applications:
+- keystone
+parameters:
+  _param:
+    mysql_keystone_password: password
+  keystone:
+    server:
+      enabled: true
+      version: ${_param:keystone_version}
+      service_token: ${_param:keystone_service_token}
+      service_tenant: service
+      admin_tenant: admin
+      admin_name: admin
+      admin_password: ${_param:keystone_admin_password}
+      admin_email: root@localhost
+      bind:
+        address: 0.0.0.0
+        private_address: ${_param:keystone_service_host}
+        private_port: 35357
+        public_address: ${_param:keystone_service_host}
+        public_port: 5000
+      region: RegionOne
+      database:
+        engine: mysql
+        host: 'localhost'
+        name: 'keystone'
+        password: '${_param:mysql_keystone_password}'
+        user: 'keystone'
+      tokens:
+        engine: cache
+        expiration: 86400
+        location: /etc/keystone/fernet-keys/
+      cache:
+        engine: memcached
+        members: 
+        - host: localhost
+          port: 11211
\ No newline at end of file