diff --git a/README.rst b/README.rst
index 085040d..0d038d3 100644
--- a/README.rst
+++ b/README.rst
@@ -239,6 +239,21 @@
             bind:
               ...
 
+Enable ceilometer notifications
+
+.. code-block:: yaml
+
+    keystone:
+      server:
+        notification: true
+        message_queue:
+          engine: rabbitmq
+          host: 127.0.0.1
+          port: 5672
+          user: openstack
+          password: password
+          virtual_host: '/openstack'
+          ha_queues: true
 
 Read more
 =========
diff --git a/keystone/files/liberty/keystone.conf.Debian b/keystone/files/liberty/keystone.conf.Debian
index d785f90..80c1ed6 100644
--- a/keystone/files/liberty/keystone.conf.Debian
+++ b/keystone/files/liberty/keystone.conf.Debian
@@ -234,7 +234,7 @@
 # messaging, messagingv2, routing, log, test, noop (multi valued)
 {%- if server.notification %}
 #notification_driver=
-notification_driver=messaging
+notification_driver=messagingv2
 {%- endif %}
 # AMQP topic used for OpenStack notifications. (list value)
 # Deprecated group/name - [rpc_notifier2]/topics
@@ -1178,7 +1178,7 @@
 #
 # From oslo.messaging
 #
-
+{%- if server.notification %}
 # Use durable queues in AMQP. (boolean value)
 # Deprecated group/name - [DEFAULT]/amqp_durable_queues
 # Deprecated group/name - [DEFAULT]/rabbit_durable_queues
@@ -1188,16 +1188,6 @@
 # Deprecated group/name - [DEFAULT]/amqp_auto_delete
 #amqp_auto_delete = false
 
-# Send a single AMQP reply to call message. The current behaviour since oslo-
-# incubator is to send two AMQP replies - first one with the payload, a second
-# one to ensure the other have finish to send the payload. We are going to
-# remove it in the N release, but we must keep backward compatible at the same
-# time. This option provides such compatibility - it defaults to False in
-# Liberty and can be turned on for early adopters with a new installations or
-# for testing. Please note, that this option will be removed in the Mitaka
-# release. (boolean value)
-#send_single_reply = false
-
 # SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
 # SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
 # distributions. (string value)
@@ -1221,17 +1211,17 @@
 # Deprecated group/name - [DEFAULT]/kombu_reconnect_delay
 #kombu_reconnect_delay = 1.0
 
-# How long to wait before considering a reconnect attempt to have failed. This
-# value should not be longer than rpc_response_timeout. (integer value)
-#kombu_reconnect_timeout = 60
-
 # The RabbitMQ broker address where a single node is used. (string value)
 # Deprecated group/name - [DEFAULT]/rabbit_host
 #rabbit_host = localhost
+rabbit_host = {{ server.message_queue.host }}
 
-# The RabbitMQ broker port where a single node is used. (integer value)
+# The RabbitMQ broker port where a single node is used. (port value)
+# Minimum value: 0
+# Maximum value: 65535
 # Deprecated group/name - [DEFAULT]/rabbit_port
 #rabbit_port = 5672
+rabbit_port = {{ server.message_queue.port }}
 
 # RabbitMQ HA cluster host:port pairs. (list value)
 # Deprecated group/name - [DEFAULT]/rabbit_hosts
@@ -1244,10 +1234,12 @@
 # The RabbitMQ userid. (string value)
 # Deprecated group/name - [DEFAULT]/rabbit_userid
 #rabbit_userid = guest
+rabbit_userid = {{ server.message_queue.user }}
 
 # The RabbitMQ password. (string value)
 # Deprecated group/name - [DEFAULT]/rabbit_password
 #rabbit_password = guest
+rabbit_password = {{ server.message_queue.password }}
 
 # The RabbitMQ login method. (string value)
 # Deprecated group/name - [DEFAULT]/rabbit_login_method
@@ -1256,6 +1248,7 @@
 # The RabbitMQ virtual host. (string value)
 # Deprecated group/name - [DEFAULT]/rabbit_virtual_host
 #rabbit_virtual_host = /
+rabbit_virtual_host = {{ server.message_queue.virtual_host }}
 
 # How frequently to retry connecting with RabbitMQ. (integer value)
 #rabbit_retry_interval = 1
@@ -1265,29 +1258,49 @@
 # Deprecated group/name - [DEFAULT]/rabbit_retry_backoff
 #rabbit_retry_backoff = 2
 
+# Maximum interval of RabbitMQ connection retries. Default is 30 seconds.
+# (integer value)
+#rabbit_interval_max = 30
+
 # Maximum number of RabbitMQ connection retries. Default is 0 (infinite retry
 # count). (integer value)
 # Deprecated group/name - [DEFAULT]/rabbit_max_retries
 #rabbit_max_retries = 0
 
-# Use HA queues in RabbitMQ (x-ha-policy: all). If you change this option, you
-# must wipe the RabbitMQ database. (boolean value)
+# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this
+# option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring
+# is no longer controlled by the x-ha-policy argument when declaring a queue.
+# If you just want to make sure that all queues (except  those with auto-
+# generated names) are mirrored across all nodes, run: "rabbitmqctl set_policy
+# HA '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value)
 # Deprecated group/name - [DEFAULT]/rabbit_ha_queues
 #rabbit_ha_queues = false
 
+# Positive integer representing duration in seconds for queue TTL (x-expires).
+# Queues which are unused for the duration of the TTL are automatically
+# deleted. The parameter affects only reply and fanout queues. (integer value)
+# Minimum value: 1
+#rabbit_transient_queues_ttl = 1800
+
+# Specifies the number of messages to prefetch. Setting to zero allows
+# unlimited messages. (integer value)
+#rabbit_qos_prefetch_count = 0
+
 # Number of seconds after which the Rabbit broker is considered down if
 # heartbeat's keep-alive fails (0 disable the heartbeat). EXPERIMENTAL (integer
 # value)
 #heartbeat_timeout_threshold = 60
+heartbeat_timeout_threshold = 0
 
 # How often times during the heartbeat_timeout_threshold we check the
 # heartbeat. (integer value)
 #heartbeat_rate = 2
+heartbeat_rate = 2
 
 # Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake (boolean value)
 # Deprecated group/name - [DEFAULT]/fake_rabbit
 #fake_rabbit = false
-
+{%- endif %}
 
 [oslo_middleware]
 
diff --git a/keystone/files/mitaka/keystone-paste.ini.Debian b/keystone/files/mitaka/keystone-paste.ini.Debian
new file mode 100644
index 0000000..4f3b0a2
--- /dev/null
+++ b/keystone/files/mitaka/keystone-paste.ini.Debian
@@ -0,0 +1,88 @@
+# Keystone PasteDeploy configuration file.
+
+[filter:debug]
+use = egg:oslo.middleware#debug
+
+[filter:request_id]
+use = egg:oslo.middleware#request_id
+
+[filter:build_auth_context]
+use = egg:keystone#build_auth_context
+
+[filter:token_auth]
+use = egg:keystone#token_auth
+
+[filter:admin_token_auth]
+# This is deprecated in the M release and will be removed in the O release.
+# Use `keystone-manage bootstrap` and remove this from the pipelines below.
+use = egg:keystone#admin_token_auth
+
+[filter:json_body]
+use = egg:keystone#json_body
+
+[filter:cors]
+use = egg:oslo.middleware#cors
+oslo_config_project = keystone
+
+[filter:ec2_extension]
+use = egg:keystone#ec2_extension
+
+[filter:ec2_extension_v3]
+use = egg:keystone#ec2_extension_v3
+
+[filter:s3_extension]
+use = egg:keystone#s3_extension
+
+[filter:url_normalize]
+use = egg:keystone#url_normalize
+
+[filter:sizelimit]
+use = egg:oslo.middleware#sizelimit
+
+[app:public_service]
+use = egg:keystone#public_service
+
+[app:service_v3]
+use = egg:keystone#service_v3
+
+[app:admin_service]
+use = egg:keystone#admin_service
+
+[pipeline:public_api]
+# The last item in this pipeline must be public_service or an equivalent
+# application. It cannot be a filter.
+pipeline = cors sizelimit url_normalize request_id admin_token_auth build_auth_context token_auth json_body ec2_extension public_service
+
+[pipeline:admin_api]
+# The last item in this pipeline must be admin_service or an equivalent
+# application. It cannot be a filter.
+pipeline = cors sizelimit url_normalize request_id admin_token_auth build_auth_context token_auth json_body ec2_extension s3_extension admin_service
+
+[pipeline:api_v3]
+# The last item in this pipeline must be service_v3 or an equivalent
+# application. It cannot be a filter.
+pipeline = cors sizelimit url_normalize request_id admin_token_auth build_auth_context token_auth json_body ec2_extension_v3 s3_extension service_v3
+
+[app:public_version_service]
+use = egg:keystone#public_version_service
+
+[app:admin_version_service]
+use = egg:keystone#admin_version_service
+
+[pipeline:public_version_api]
+pipeline = cors sizelimit url_normalize public_version_service
+
+[pipeline:admin_version_api]
+pipeline = cors sizelimit url_normalize admin_version_service
+
+[composite:main]
+use = egg:Paste#urlmap
+/v2.0 = public_api
+/v3 = api_v3
+/ = public_version_api
+
+[composite:admin]
+use = egg:Paste#urlmap
+/v2.0 = admin_api
+/v3 = api_v3
+/ = admin_version_api
diff --git a/keystone/files/mitaka/keystone-paste.ini.RedHat b/keystone/files/mitaka/keystone-paste.ini.RedHat
new file mode 120000
index 0000000..6eebd5d
--- /dev/null
+++ b/keystone/files/mitaka/keystone-paste.ini.RedHat
@@ -0,0 +1 @@
+keystone-paste.ini.Debian
\ No newline at end of file
diff --git a/keystone/files/mitaka/keystone.conf.Debian b/keystone/files/mitaka/keystone.conf.Debian
new file mode 100644
index 0000000..9f80fd9
--- /dev/null
+++ b/keystone/files/mitaka/keystone.conf.Debian
@@ -0,0 +1,2172 @@
+{% from "keystone/map.jinja" import server with context %}
+[DEFAULT]
+
+#
+# From keystone
+#
+
+# A "shared secret" that can be used to bootstrap Keystone. This "token" does
+# not represent a user, and carries no explicit authorization. If set to
+# `None`, the value is ignored and the `admin_token` log in mechanism is
+# effectively disabled. To completely disable `admin_token` in production
+# (highly recommended), remove AdminTokenAuthMiddleware from your paste
+# application pipelines (for example, in keystone-paste.ini). (string value)
+#admin_token = <None>
+admin_token={{ server.service_token }}
+
+# The base public endpoint URL for Keystone that is advertised to clients
+# (NOTE: this does NOT affect how Keystone listens for connections). Defaults
+# to the base host URL of the request. E.g. a request to
+# http://server:5000/v3/users will default to http://server:5000. You should
+# only need to set this value if the base URL contains a path (e.g. /prefix/v3)
+# or the endpoint should be found on a different server. (string value)
+#public_endpoint = <None>
+
+# The base admin endpoint URL for Keystone that is advertised to clients (NOTE:
+# this does NOT affect how Keystone listens for connections). Defaults to the
+# base host URL of the request. E.g. a request to http://server:35357/v3/users
+# will default to http://server:35357. You should only need to set this value
+# if the base URL contains a path (e.g. /prefix/v3) or the endpoint should be
+# found on a different server. (string value)
+#admin_endpoint = <None>
+
+# Maximum depth of the project hierarchy, excluding the project acting as a
+# domain at the top of the hierarchy. WARNING: setting it to a large value may
+# adversely impact  performance. (integer value)
+#max_project_tree_depth = 5
+
+# Limit the sizes of user & project ID/names. (integer value)
+#max_param_size = 64
+
+# Similar to max_param_size, but provides an exception for token values.
+# (integer value)
+#max_token_size = 8192
+
+# Similar to the member_role_name option, this represents the default role ID
+# used to associate users with their default projects in the v2 API. This will
+# be used as the explicit role where one is not specified by the v2 API.
+# (string value)
+#member_role_id = 9fe2ff9ee4384b1894a90878d3e92bab
+
+# This is the role name used in combination with the member_role_id option; see
+# that option for more detail. (string value)
+#member_role_name = _member_
+
+# The value passed as the keyword "rounds" to passlib's encrypt method.
+# (integer value)
+# Minimum value: 1000
+# Maximum value: 100000
+#crypt_strength = 10000
+
+# The maximum number of entities that will be returned in a collection, with no
+# limit set by default. This global limit may be then overridden for a specific
+# driver, by specifying a list_limit in the appropriate section (e.g.
+# [assignment]). (integer value)
+#list_limit = <None>
+
+# Set this to false if you want to enable the ability for user, group and
+# project entities to be moved between domains by updating their domain_id.
+# Allowing such movement is not recommended if the scope of a domain admin is
+# being restricted by use of an appropriate policy file (see
+# policy.v3cloudsample as an example). This ability is deprecated and will be
+# removed in a future release. (boolean value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#domain_id_immutable = true
+
+# If set to true, strict password length checking is performed for password
+# manipulation. If a password exceeds the maximum length, the operation will
+# fail with an HTTP 403 Forbidden error. If set to false, passwords are
+# automatically truncated to the maximum length. (boolean value)
+#strict_password_check = false
+
+# The HTTP header used to determine the scheme for the original request, even
+# if it was removed by an SSL terminating proxy. (string value)
+#secure_proxy_ssl_header = HTTP_X_FORWARDED_PROTO
+secure_proxy_ssl_header = "HTTP_X_FORWARDED_PROTO"
+
+# If set to true the server will return information in the response that may
+# allow an unauthenticated or authenticated user to get more information than
+# normal, such as why authentication failed. This may be useful for debugging
+# but is insecure. (boolean value)
+#insecure_debug = false
+
+#
+# From keystone.notifications
+#
+
+# Default publisher_id for outgoing notifications (string value)
+#default_publisher_id = <None>
+
+# Define the notification format for Identity Service events. A "basic"
+# notification has information about the resource being operated on. A "cadf"
+# notification has the same information, as well as information about the
+# initiator of the event. (string value)
+# Allowed values: basic, cadf
+#notification_format = basic
+
+# Define the notification options to opt-out from. The value expected is:
+# identity.<resource_type>.<operation>. This field can be set multiple times in
+# order to add more notifications to opt-out from. For example:
+#  notification_opt_out=identity.user.created
+#  notification_opt_out=identity.authenticate.success (multi valued)
+#notification_opt_out =
+
+#
+# From oslo.log
+#
+
+# If set to true, the logging level will be set to DEBUG instead of the default
+# INFO level. (boolean value)
+#debug = false
+debug = false
+
+# If set to false, the logging level will be set to WARNING instead of the
+# default INFO level. (boolean value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#verbose = true
+verbose = true
+
+# The name of a logging configuration file. This file is appended to any
+# existing logging configuration files. For details about logging configuration
+# files, see the Python logging module documentation. Note that when logging
+# configuration files are used then all logging configuration is set in the
+# configuration file and other logging configuration options are ignored (for
+# example, logging_context_format_string). (string value)
+# Deprecated group/name - [DEFAULT]/log_config
+#log_config_append = <None>
+
+# Defines the format string for %%(asctime)s in log records. Default:
+# %(default)s . This option is ignored if log_config_append is set. (string
+# value)
+#log_date_format = %Y-%m-%d %H:%M:%S
+
+# (Optional) Name of log file to send logging output to. If no default is set,
+# logging will go to stderr as defined by use_stderr. This option is ignored if
+# log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logfile
+#log_file = <None>
+
+# (Optional) The base directory used for relative log_file  paths. This option
+# is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logdir
+#log_dir = <None>
+log_dir = /var/log/keystone
+
+# Uses logging handler designed to watch file system. When log file is moved or
+# removed this handler will open a new log file with specified path
+# instantaneously. It makes sense only if log_file option is specified and
+# Linux platform is used. This option is ignored if log_config_append is set.
+# (boolean value)
+#watch_log_file = false
+
+# Use syslog for logging. Existing syslog format is DEPRECATED and will be
+# changed later to honor RFC5424. This option is ignored if log_config_append
+# is set. (boolean value)
+#use_syslog = false
+
+# Syslog facility to receive log lines. This option is ignored if
+# log_config_append is set. (string value)
+#syslog_log_facility = LOG_USER
+
+# Log output to standard error. This option is ignored if log_config_append is
+# set. (boolean value)
+#use_stderr = true
+
+# Format string to use for log messages with context. (string value)
+#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
+
+# Format string to use for log messages when context is undefined. (string
+# value)
+#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
+
+# Additional data to append to log message when logging level for the message
+# is DEBUG. (string value)
+#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
+
+# Prefix each line of exception output with this format. (string value)
+#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
+
+# Defines the format string for %(user_identity)s that is used in
+# logging_context_format_string. (string value)
+#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
+
+# List of package logging levels in logger=LEVEL pairs. This option is ignored
+# if log_config_append is set. (list value)
+#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
+
+# Enables or disables publication of error events. (boolean value)
+#publish_errors = false
+
+# The format for an instance that is passed with the log message. (string
+# value)
+#instance_format = "[instance: %(uuid)s] "
+
+# The format for an instance UUID that is passed with the log message. (string
+# value)
+#instance_uuid_format = "[instance: %(uuid)s] "
+
+# Enables or disables fatal status of deprecations. (boolean value)
+#fatal_deprecations = false
+
+#
+# From oslo.messaging
+#
+
+# Size of RPC connection pool. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_conn_pool_size
+#rpc_conn_pool_size = 30
+
+# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
+# The "host" option should point or resolve to this address. (string value)
+#rpc_zmq_bind_address = *
+
+# MatchMaker driver. (string value)
+# Allowed values: redis, dummy
+#rpc_zmq_matchmaker = redis
+
+# Type of concurrency used. Either "native" or "eventlet" (string value)
+#rpc_zmq_concurrency = eventlet
+
+# Number of ZeroMQ contexts, defaults to 1. (integer value)
+#rpc_zmq_contexts = 1
+
+# Maximum number of ingress messages to locally buffer per topic. Default is
+# unlimited. (integer value)
+#rpc_zmq_topic_backlog = <None>
+
+# Directory for holding IPC sockets. (string value)
+#rpc_zmq_ipc_dir = /var/run/openstack
+
+# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
+# "host" option, if running Nova. (string value)
+#rpc_zmq_host = localhost
+
+# Seconds to wait before a cast expires (TTL). The default value of -1
+# specifies an infinite linger period. The value of 0 specifies no linger
+# period. Pending messages shall be discarded immediately when the socket is
+# closed. Only supported by impl_zmq. (integer value)
+#rpc_cast_timeout = -1
+
+# The default number of seconds that poll should wait. Poll raises timeout
+# exception when timeout expired. (integer value)
+#rpc_poll_timeout = 1
+
+# Expiration timeout in seconds of a name service record about existing target
+# ( < 0 means no timeout). (integer value)
+#zmq_target_expire = 120
+
+# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
+# value)
+#use_pub_sub = true
+
+# Minimal port number for random ports range. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#rpc_zmq_min_port = 49152
+
+# Maximal port number for random ports range. (integer value)
+# Minimum value: 1
+# Maximum value: 65536
+#rpc_zmq_max_port = 65536
+
+# Number of retries to find free port number before fail with ZMQBindError.
+# (integer value)
+#rpc_zmq_bind_port_retries = 100
+
+# Size of executor thread pool. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
+#executor_thread_pool_size = 64
+
+# Seconds to wait for a response from a call. (integer value)
+#rpc_response_timeout = 60
+
+# A URL representing the messaging driver to use and its full configuration. If
+# not set, we fall back to the rpc_backend option and driver specific
+# configuration. (string value)
+#transport_url = <None>
+
+# The messaging driver to use, defaults to rabbit. Other drivers include amqp
+# and zmq. (string value)
+#rpc_backend = rabbit
+
+# The default exchange under which topics are scoped. May be overridden by an
+# exchange name specified in the transport_url option. (string value)
+#control_exchange = keystone
+
+#
+# From oslo.service.service
+#
+
+# Enable eventlet backdoor.  Acceptable values are 0, <port>, and
+# <start>:<end>, where 0 results in listening on a random tcp port number;
+# <port> results in listening on the specified port number (and not enabling
+# backdoor if that port is in use); and <start>:<end> results in listening on
+# the smallest unused port number within the specified range of port numbers.
+# The chosen port is displayed in the service's log file. (string value)
+#backdoor_port = <None>
+
+# Enable eventlet backdoor, using the provided path as a unix socket that can
+# receive connections. This option is mutually exclusive with 'backdoor_port'
+# in that only one should be provided. If both are provided then the existence
+# of this option overrides the usage of that option. (string value)
+#backdoor_socket = <None>
+
+# Enables or disables logging values of all registered options when starting a
+# service (at DEBUG level). (boolean value)
+#log_options = true
+
+# Specify a timeout after which a gracefully shutdown server will exit. Zero
+# value means endless wait. (integer value)
+#graceful_shutdown_timeout = 60
+
+
+[assignment]
+
+#
+# From keystone
+#
+
+# Entrypoint for the assignment backend driver in the keystone.assignment
+# namespace. Only an SQL driver is supplied. If an assignment driver is not
+# specified, the identity driver will choose the assignment driver (driver
+# selection based on `[identity]/driver` option is deprecated and will be
+# removed in the "O" release). (string value)
+#driver = <None>
+
+# A list of role names which are prohibited from being an implied role. (list
+# value)
+#prohibited_implied_role = admin
+
+{%- if server.get("assignment", {}).get("backend", "sql") == "ldap" %}
+driver = ldap
+{%- else %}
+driver = sql
+{%- endif %}
+
+[auth]
+
+#
+# From keystone
+#
+
+# Allowed authentication methods. (list value)
+#methods = external,password,token,oauth1
+
+# Entrypoint for the password auth plugin module in the keystone.auth.password
+# namespace. (string value)
+#password = <None>
+
+# Entrypoint for the token auth plugin module in the keystone.auth.token
+# namespace. (string value)
+#token = <None>
+
+# Entrypoint for the external (REMOTE_USER) auth plugin module in the
+# keystone.auth.external namespace. Supplied drivers are DefaultDomain and
+# Domain. The default driver is DefaultDomain. (string value)
+#external = <None>
+
+# Entrypoint for the oAuth1.0 auth plugin module in the keystone.auth.oauth1
+# namespace. (string value)
+#oauth1 = <None>
+
+
+[cache]
+
+#
+# From oslo.cache
+#
+
+# Prefix for building the configuration dictionary for the cache region. This
+# should not need to be changed unless there is another dogpile.cache region
+# with the same configuration name. (string value)
+#config_prefix = cache.oslo
+
+# Default TTL, in seconds, for any cached item in the dogpile.cache region.
+# This applies to any cached method that doesn't have an explicit cache
+# expiration time defined for it. (integer value)
+#expiration_time = 600
+
+# Dogpile.cache backend module. It is recommended that Memcache with pooling
+# (oslo_cache.memcache_pool) or Redis (dogpile.cache.redis) be used in
+# production deployments.  Small workloads (single process) like devstack can
+# use the dogpile.cache.memory backend. (string value)
+#backend = dogpile.cache.null
+backend = oslo_cache.memcache_pool
+
+# Arguments supplied to the backend module. Specify this option once per
+# argument to be passed to the dogpile.cache backend. Example format:
+# "<argname>:<value>". (multi valued)
+#backend_argument =
+
+# Proxy classes to import that will affect the way the dogpile.cache backend
+# functions. See the dogpile.cache documentation on changing-backend-behavior.
+# (list value)
+#proxies =
+
+# Global toggle for caching. (boolean value)
+#enabled = false
+enabled = true
+
+# Extra debugging from the cache backend (cache keys, get/set/delete/etc
+# calls). This is only really useful if you need to see the specific cache-
+# backend get/set/delete calls with the keys/values.  Typically this should be
+# left set to false. (boolean value)
+#debug_cache_backend = false
+
+# Memcache servers in the format of "host:port". (dogpile.cache.memcache and
+# oslo_cache.memcache_pool backends only). (list value)
+#memcache_servers = localhost:11211
+{%- if server.cache is defined %}
+{%- if server.cache.members is defined %}
+memcache_servers = {%- for member in server.cache.members %}{{ member.host }}:{{ member.port }}{% if not loop.last %},{% endif %}{%- endfor %}
+{%- else %}
+memcache_servers = ['{{ server.cache.host }}:{{ server.cache.port }}']
+{%- endif %}
+{%- endif %}
+
+# Number of seconds memcached server is considered dead before it is tried
+# again. (dogpile.cache.memcache and oslo_cache.memcache_pool backends only).
+# (integer value)
+#memcache_dead_retry = 300
+memcache_dead_retry = 300
+
+# Timeout in seconds for every call to a server. (dogpile.cache.memcache and
+# oslo_cache.memcache_pool backends only). (integer value)
+#memcache_socket_timeout = 3
+memcache_socket_timeout = 1
+
+# Max total number of open connections to every memcached server.
+# (oslo_cache.memcache_pool backend only). (integer value)
+#memcache_pool_maxsize = 10
+memcache_pool_maxsize = 100
+
+# Number of seconds a connection to memcached is held unused in the pool before
+# it is closed. (oslo_cache.memcache_pool backend only). (integer value)
+#memcache_pool_unused_timeout = 60
+memcache_pool_unused_timeout = 60
+
+# Number of seconds that an operation will wait to get a memcache client
+# connection. (integer value)
+#memcache_pool_connection_get_timeout = 10
+
+
+[catalog]
+
+#
+# From keystone
+#
+
+# Catalog template file name for use with the template catalog backend. (string
+# value)
+#template_file = default_catalog.templates
+template_file = default_catalog.templates
+
+# Entrypoint for the catalog backend driver in the keystone.catalog namespace.
+# Supplied drivers are kvs, sql, templated, and endpoint_filter.sql (string
+# value)
+driver = sql
+
+# Toggle for catalog caching. This has no effect unless global caching is
+# enabled. (boolean value)
+#caching = true
+
+# Time to cache catalog data (in seconds). This has no effect unless global and
+# catalog caching are enabled. (integer value)
+#cache_time = <None>
+
+# Maximum number of entities that will be returned in a catalog collection.
+# (integer value)
+#list_limit = <None>
+
+
+[cors]
+
+#
+# From oslo.middleware
+#
+
+# Indicate whether this resource may be shared with the domain received in the
+# requests "origin" header. (list value)
+#allowed_origin = <None>
+
+# Indicate that the actual request can include user credentials (boolean value)
+#allow_credentials = true
+
+# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
+# Headers. (list value)
+#expose_headers = X-Auth-Token,X-Openstack-Request-Id,X-Subject-Token
+
+# Maximum cache age of CORS preflight requests. (integer value)
+#max_age = 3600
+
+# Indicate which methods can be used during the actual request. (list value)
+#allow_methods = GET,PUT,POST,DELETE,PATCH
+
+# Indicate which header field names may be used during the actual request.
+# (list value)
+#allow_headers = X-Auth-Token,X-Openstack-Request-Id,X-Subject-Token,X-Project-Id,X-Project-Name,X-Project-Domain-Id,X-Project-Domain-Name,X-Domain-Id,X-Domain-Name
+
+
+[cors.subdomain]
+
+#
+# From oslo.middleware
+#
+
+# Indicate whether this resource may be shared with the domain received in the
+# requests "origin" header. (list value)
+#allowed_origin = <None>
+
+# Indicate that the actual request can include user credentials (boolean value)
+#allow_credentials = true
+
+# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
+# Headers. (list value)
+#expose_headers = X-Auth-Token,X-Openstack-Request-Id,X-Subject-Token
+
+# Maximum cache age of CORS preflight requests. (integer value)
+#max_age = 3600
+
+# Indicate which methods can be used during the actual request. (list value)
+#allow_methods = GET,PUT,POST,DELETE,PATCH
+
+# Indicate which header field names may be used during the actual request.
+# (list value)
+#allow_headers = X-Auth-Token,X-Openstack-Request-Id,X-Subject-Token,X-Project-Id,X-Project-Name,X-Project-Domain-Id,X-Project-Domain-Name,X-Domain-Id,X-Domain-Name
+
+
+[credential]
+
+#
+# From keystone
+#
+
+# Entrypoint for the credential backend driver in the keystone.credential
+# namespace. (string value)
+#driver = sql
+
+
+[database]
+
+#
+# From oslo.db
+#
+
+# The file name to use with SQLite. (string value)
+# Deprecated group/name - [DEFAULT]/sqlite_db
+#sqlite_db = oslo.sqlite
+
+# If True, SQLite uses synchronous mode. (boolean value)
+# Deprecated group/name - [DEFAULT]/sqlite_synchronous
+#sqlite_synchronous = true
+
+# The back end to use for the database. (string value)
+# Deprecated group/name - [DEFAULT]/db_backend
+#backend = sqlalchemy
+
+# The SQLAlchemy connection string to use to connect to the database. (string
+# value)
+# Deprecated group/name - [DEFAULT]/sql_connection
+# Deprecated group/name - [DATABASE]/sql_connection
+# Deprecated group/name - [sql]/connection
+#connection = <None>
+connection={{ server.database.engine }}://{{ server.database.user }}:{{ server.database.password }}@{{ server.database.host }}/{{ server.database.name }}
+
+# The SQLAlchemy connection string to use to connect to the slave database.
+# (string value)
+#slave_connection = <None>
+
+# The SQL mode to be used for MySQL sessions. This option, including the
+# default, overrides any server-set SQL mode. To use whatever SQL mode is set
+# by the server configuration, set this to no value. Example: mysql_sql_mode=
+# (string value)
+#mysql_sql_mode = TRADITIONAL
+
+# Timeout before idle SQL connections are reaped. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_idle_timeout
+# Deprecated group/name - [DATABASE]/sql_idle_timeout
+# Deprecated group/name - [sql]/idle_timeout
+#idle_timeout = 3600
+idle_timeout = 3600
+
+# Minimum number of SQL connections to keep open in a pool. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_min_pool_size
+# Deprecated group/name - [DATABASE]/sql_min_pool_size
+#min_pool_size = 1
+
+# Maximum number of SQL connections to keep open in a pool. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_max_pool_size
+# Deprecated group/name - [DATABASE]/sql_max_pool_size
+#max_pool_size = <None>
+max_pool_size=10
+max_overflow=30
+max_retries=-1
+
+# Maximum number of database connection retries during startup. Set to -1 to
+# specify an infinite retry count. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_max_retries
+# Deprecated group/name - [DATABASE]/sql_max_retries
+#max_retries = 10
+
+# Interval between retries of opening a SQL connection. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_retry_interval
+# Deprecated group/name - [DATABASE]/reconnect_interval
+#retry_interval = 10
+
+# If set, use this value for max_overflow with SQLAlchemy. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_max_overflow
+# Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
+#max_overflow = 50
+
+# Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
+# value)
+# Deprecated group/name - [DEFAULT]/sql_connection_debug
+#connection_debug = 0
+
+# Add Python stack traces to SQL as comment strings. (boolean value)
+# Deprecated group/name - [DEFAULT]/sql_connection_trace
+#connection_trace = false
+
+# If set, use this value for pool_timeout with SQLAlchemy. (integer value)
+# Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
+#pool_timeout = <None>
+
+# Enable the experimental use of database reconnect on connection lost.
+# (boolean value)
+#use_db_reconnect = false
+
+# Seconds between retries of a database transaction. (integer value)
+#db_retry_interval = 1
+
+# If True, increases the interval between retries of a database operation up to
+# db_max_retry_interval. (boolean value)
+#db_inc_retry_interval = true
+
+# If db_inc_retry_interval is set, the maximum seconds between retries of a
+# database operation. (integer value)
+#db_max_retry_interval = 10
+
+# Maximum retries in case of connection error or deadlock error before error is
+# raised. Set to -1 to specify an infinite retry count. (integer value)
+#db_max_retries = 20
+
+
+[domain_config]
+
+#
+# From keystone
+#
+
+# Entrypoint for the domain config backend driver in the
+# keystone.resource.domain_config namespace. (string value)
+#driver = sql
+
+# Toggle for domain config caching. This has no effect unless global caching is
+# enabled. (boolean value)
+#caching = true
+
+# TTL (in seconds) to cache domain config data. This has no effect unless
+# domain config caching is enabled. (integer value)
+#cache_time = 300
+
+
+[endpoint_filter]
+
+#
+# From keystone
+#
+
+# Entrypoint for the endpoint filter backend driver in the
+# keystone.endpoint_filter namespace. (string value)
+#driver = sql
+
+# Toggle to return all active endpoints if no filter exists. (boolean value)
+#return_all_endpoints_if_no_filter = true
+
+
+[endpoint_policy]
+
+#
+# From keystone
+#
+
+# Enable endpoint_policy functionality. (boolean value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: The option to enable the OS-ENDPOINT-POLICY extension has been
+# deprecated in the M release and will be removed in the O release. The OS-
+# ENDPOINT-POLICY extension will be enabled by default.
+#enabled = true
+
+# Entrypoint for the endpoint policy backend driver in the
+# keystone.endpoint_policy namespace. (string value)
+#driver = sql
+
+
+[eventlet_server]
+
+#
+# From keystone
+#
+
+# The number of worker processes to serve the public eventlet application.
+# Defaults to number of CPUs (minimum of 2). (integer value)
+# Deprecated group/name - [DEFAULT]/public_workers
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#public_workers = <None>
+
+# The number of worker processes to serve the admin eventlet application.
+# Defaults to number of CPUs (minimum of 2). (integer value)
+# Deprecated group/name - [DEFAULT]/admin_workers
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#admin_workers = <None>
+
+# The IP address of the network interface for the public service to listen on.
+# (string value)
+# Deprecated group/name - [DEFAULT]/bind_host
+# Deprecated group/name - [DEFAULT]/public_bind_host
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#public_bind_host = 0.0.0.0
+public_bind_host={% if server.bind.address is defined %}{{ server.bind.address }}{% else %}{{ server.bind.public_address }}{% endif %}
+
+# The port number which the public service listens on. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+# Deprecated group/name - [DEFAULT]/public_port
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#public_port = 5000
+
+# The IP address of the network interface for the admin service to listen on.
+# (string value)
+# Deprecated group/name - [DEFAULT]/bind_host
+# Deprecated group/name - [DEFAULT]/admin_bind_host
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#admin_bind_host = 0.0.0.0
+admin_bind_host={% if server.bind.address is defined %}{{ server.bind.address }}{% else %}{{ server.bind.public_address }}{% endif %}
+
+# The port number which the admin service listens on. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+# Deprecated group/name - [DEFAULT]/admin_port
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#admin_port = 35357
+
+# If set to false, disables keepalives on the server; all connections will be
+# closed after serving one request. (boolean value)
+#wsgi_keep_alive = true
+
+# Timeout for socket operations on a client connection. If an incoming
+# connection is idle for this number of seconds it will be closed. A value of
+# "0" means wait forever. (integer value)
+#client_socket_timeout = 900
+
+# Set this to true if you want to enable TCP_KEEPALIVE on server sockets, i.e.
+# sockets used by the Keystone wsgi server for client connections. (boolean
+# value)
+# Deprecated group/name - [DEFAULT]/tcp_keepalive
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#tcp_keepalive = false
+
+# Sets the value of TCP_KEEPIDLE in seconds for each server socket. Only
+# applies if tcp_keepalive is true. Ignored if system does not support it.
+# (integer value)
+# Deprecated group/name - [DEFAULT]/tcp_keepidle
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#tcp_keepidle = 600
+
+
+[eventlet_server_ssl]
+
+#
+# From keystone
+#
+
+# Toggle for SSL support on the Keystone eventlet servers. (boolean value)
+# Deprecated group/name - [ssl]/enable
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#enable = false
+
+# Path of the certfile for SSL. For non-production environments, you may be
+# interested in using `keystone-manage ssl_setup` to generate self-signed
+# certificates. (string value)
+# Deprecated group/name - [ssl]/certfile
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#certfile = /etc/keystone/ssl/certs/keystone.pem
+
+# Path of the keyfile for SSL. (string value)
+# Deprecated group/name - [ssl]/keyfile
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#keyfile = /etc/keystone/ssl/private/keystonekey.pem
+
+# Path of the CA cert file for SSL. (string value)
+# Deprecated group/name - [ssl]/ca_certs
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#ca_certs = /etc/keystone/ssl/certs/ca.pem
+
+# Require client certificate. (boolean value)
+# Deprecated group/name - [ssl]/cert_required
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#cert_required = false
+
+
+[federation]
+
+#
+# From keystone
+#
+
+# Entrypoint for the federation backend driver in the keystone.federation
+# namespace. (string value)
+#driver = sql
+
+# Value to be used when filtering assertion parameters from the environment.
+# (string value)
+#assertion_prefix =
+
+# Value to be used to obtain the entity ID of the Identity Provider from the
+# environment (e.g. if using the mod_shib plugin this value is `Shib-Identity-
+# Provider`). (string value)
+#remote_id_attribute = <None>
+
+# A domain name that is reserved to allow federated ephemeral users to have a
+# domain concept. Note that an admin will not be able to create a domain with
+# this name or update an existing domain to this name. You are not advised to
+# change this value unless you really have to. (string value)
+#federated_domain_name = Federated
+
+# A list of trusted dashboard hosts. Before accepting a Single Sign-On request
+# to return a token, the origin host must be a member of the trusted_dashboard
+# list. This configuration option may be repeated for multiple values. For
+# example: trusted_dashboard=http://acme.com/auth/websso
+# trusted_dashboard=http://beta.com/auth/websso (multi valued)
+#trusted_dashboard =
+
+# Location of Single Sign-On callback handler, will return a token to a trusted
+# dashboard host. (string value)
+#sso_callback_template = /etc/keystone/sso_callback_template.html
+
+
+[fernet_tokens]
+
+#
+# From keystone
+#
+
+# Directory containing Fernet token keys. (string value)
+#key_repository = /etc/keystone/fernet-keys/
+key_repository = {{ server.tokens.location }}
+
+# This controls how many keys are held in rotation by keystone-manage
+# fernet_rotate before they are discarded. The default value of 3 means that
+# keystone will maintain one staged key, one primary key, and one secondary
+# key. Increasing this value means that additional secondary keys will be kept
+# in the rotation. (integer value)
+#max_active_keys = 3
+
+
+[identity]
+
+#
+# From keystone
+#
+
+# This references the domain to use for all Identity API v2 requests (which are
+# not aware of domains). A domain with this ID will be created for you by
+# keystone-manage db_sync in migration 008. The domain referenced by this ID
+# cannot be deleted on the v3 API, to prevent accidentally breaking the v2 API.
+# There is nothing special about this domain, other than the fact that it must
+# exist to order to maintain support for your v2 clients. (string value)
+#default_domain_id = default
+{%- if server.get('domain', {}) %}
+{%- for name, domain in server.domain.iteritems() %}
+{%- if domain.get('default', False) %}
+default_domain_id = {{ name }}
+{%- endif %}
+{%- endfor %}
+{%- endif %}
+
+# A subset (or all) of domains can have their own identity driver, each with
+# their own partial configuration options, stored in either the resource
+# backend or in a file in a domain configuration directory (depending on the
+# setting of domain_configurations_from_database). Only values specific to the
+# domain need to be specified in this manner. This feature is disabled by
+# default; set to true to enable. (boolean value)
+#domain_specific_drivers_enabled = false
+{%- if server.get('domain', {}) %}
+domain_specific_drivers_enabled = true
+{%- endif %}
+
+# Extract the domain specific configuration options from the resource backend
+# where they have been stored with the domain data. This feature is disabled by
+# default (in which case the domain specific options will be loaded from files
+# in the domain configuration directory); set to true to enable. (boolean
+# value)
+#domain_configurations_from_database = false
+
+# Path for Keystone to locate the domain specific identity configuration files
+# if domain_specific_drivers_enabled is set to true. (string value)
+#domain_config_dir = /etc/keystone/domains
+{%- if server.get('domain', {}) %}
+domain_config_dir = /etc/keystone/domains
+{%- endif %}
+
+# Entrypoint for the identity backend driver in the keystone.identity
+# namespace. Supplied drivers are ldap and sql. (string value)
+#driver = sql
+{%- if server.get('backend', 'sql') == 'ldap' %}
+driver = ldap
+{%- else %}
+driver = sql
+{%- endif %}
+
+# Toggle for identity caching. This has no effect unless global caching is
+# enabled. (boolean value)
+#caching = true
+
+# Time to cache identity data (in seconds). This has no effect unless global
+# and identity caching are enabled. (integer value)
+#cache_time = 600
+
+# Maximum supported length for user passwords; decrease to improve performance.
+# (integer value)
+# Maximum value: 4096
+#max_password_length = 4096
+
+# Maximum number of entities that will be returned in an identity collection.
+# (integer value)
+#list_limit = <None>
+
+
+[identity_mapping]
+
+#
+# From keystone
+#
+
+# Entrypoint for the identity mapping backend driver in the
+# keystone.identity.id_mapping namespace. (string value)
+#driver = sql
+
+# Entrypoint for the public ID generator for user and group entities in the
+# keystone.identity.id_generator namespace. The Keystone identity mapper only
+# supports generators that produce no more than 64 characters. (string value)
+#generator = sha256
+
+# The format of user and group IDs changed in Juno for backends that do not
+# generate UUIDs (e.g. LDAP), with keystone providing a hash mapping to the
+# underlying attribute in LDAP. By default this mapping is disabled, which
+# ensures that existing IDs will not change. Even when the mapping is enabled
+# by using domain specific drivers, any users and groups from the default
+# domain being handled by LDAP will still not be mapped to ensure their IDs
+# remain backward compatible. Setting this value to False will enable the
+# mapping for even the default LDAP driver. It is only safe to do this if you
+# do not already have assignments for users and groups from the default LDAP
+# domain, and it is acceptable for Keystone to provide the different IDs to
+# clients than it did previously. Typically this means that the only time you
+# can set this value to False is when configuring a fresh installation.
+# (boolean value)
+#backward_compatible_ids = true
+
+
+[kvs]
+
+#
+# From keystone
+#
+
+# Extra dogpile.cache backend modules to register with the dogpile.cache
+# library. (list value)
+#backends =
+
+# Prefix for building the configuration dictionary for the KVS region. This
+# should not need to be changed unless there is another dogpile.cache region
+# with the same configuration name. (string value)
+#config_prefix = keystone.kvs
+
+# Toggle to disable using a key-mangling function to ensure fixed length keys.
+# This is toggle-able for debugging purposes, it is highly recommended to
+# always leave this set to true. (boolean value)
+#enable_key_mangler = true
+
+# Default lock timeout (in seconds) for distributed locking. (integer value)
+#default_lock_timeout = 5
+
+{%- if server.get("backend", "sql") == "ldap" %}
+{%- set ldap = server.ldap %}
+{% include "keystone/files/_ldap.conf" %}
+{%- endif %}
+
+[ldap]
+
+#
+# From keystone
+#
+
+# URL(s) for connecting to the LDAP server. Multiple LDAP URLs may be specified
+# as a comma separated string. The first URL to successfully bind is used for
+# the connection. (string value)
+#url = ldap://localhost
+
+# User BindDN to query the LDAP server. (string value)
+#user = <None>
+
+# Password for the BindDN to query the LDAP server. (string value)
+#password = <None>
+
+# LDAP server suffix (string value)
+#suffix = cn=example,cn=com
+
+# If true, will add a dummy member to groups. This is required if the
+# objectclass for groups requires the "member" attribute. (boolean value)
+#use_dumb_member = false
+
+# DN of the "dummy member" to use when "use_dumb_member" is enabled. (string
+# value)
+#dumb_member = cn=dumb,dc=nonexistent
+
+# Delete subtrees using the subtree delete control. Only enable this option if
+# your LDAP server supports subtree deletion. (boolean value)
+#allow_subtree_delete = false
+
+# The LDAP scope for queries, "one" represents oneLevel/singleLevel and "sub"
+# represents subtree/wholeSubtree options. (string value)
+# Allowed values: one, sub
+#query_scope = one
+
+# Maximum results per page; a value of zero ("0") disables paging. (integer
+# value)
+#page_size = 0
+
+# The LDAP dereferencing option for queries. The "default" option falls back to
+# using default dereferencing configured by your ldap.conf. (string value)
+# Allowed values: never, searching, always, finding, default
+#alias_dereferencing = default
+
+# Sets the LDAP debugging level for LDAP calls. A value of 0 means that
+# debugging is not enabled. This value is a bitmask, consult your LDAP
+# documentation for possible values. (integer value)
+#debug_level = <None>
+
+# Override the system's default referral chasing behavior for queries. (boolean
+# value)
+#chase_referrals = <None>
+
+# Search base for users. Defaults to the suffix value. (string value)
+#user_tree_dn = <None>
+
+# LDAP search filter for users. (string value)
+#user_filter = <None>
+
+# LDAP objectclass for users. (string value)
+#user_objectclass = inetOrgPerson
+
+# LDAP attribute mapped to user id. WARNING: must not be a multivalued
+# attribute. (string value)
+#user_id_attribute = cn
+
+# LDAP attribute mapped to user name. (string value)
+#user_name_attribute = sn
+
+# LDAP attribute mapped to user description. (string value)
+#user_description_attribute = description
+
+# LDAP attribute mapped to user email. (string value)
+#user_mail_attribute = mail
+
+# LDAP attribute mapped to password. (string value)
+#user_pass_attribute = userPassword
+
+# LDAP attribute mapped to user enabled flag. (string value)
+#user_enabled_attribute = enabled
+
+# Invert the meaning of the boolean enabled values. Some LDAP servers use a
+# boolean lock attribute where "true" means an account is disabled. Setting
+# "user_enabled_invert = true" will allow these lock attributes to be used.
+# This setting will have no effect if "user_enabled_mask" or
+# "user_enabled_emulation" settings are in use. (boolean value)
+#user_enabled_invert = false
+
+# Bitmask integer to indicate the bit that the enabled value is stored in if
+# the LDAP server represents "enabled" as a bit on an integer rather than a
+# boolean. A value of "0" indicates the mask is not used. If this is not set to
+# "0" the typical value is "2". This is typically used when
+# "user_enabled_attribute = userAccountControl". (integer value)
+#user_enabled_mask = 0
+
+# Default value to enable users. This should match an appropriate int value if
+# the LDAP server uses non-boolean (bitmask) values to indicate if a user is
+# enabled or disabled. If this is not set to "True" the typical value is "512".
+# This is typically used when "user_enabled_attribute = userAccountControl".
+# (string value)
+#user_enabled_default = True
+
+# List of attributes stripped off the user on update. (list value)
+#user_attribute_ignore = default_project_id
+
+# LDAP attribute mapped to default_project_id for users. (string value)
+#user_default_project_id_attribute = <None>
+
+# Allow user creation in LDAP backend. (boolean value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Write support for Identity LDAP backends has been deprecated in the M
+# release and will be removed in the O release.
+#user_allow_create = true
+
+# Allow user updates in LDAP backend. (boolean value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Write support for Identity LDAP backends has been deprecated in the M
+# release and will be removed in the O release.
+#user_allow_update = true
+
+# Allow user deletion in LDAP backend. (boolean value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Write support for Identity LDAP backends has been deprecated in the M
+# release and will be removed in the O release.
+#user_allow_delete = true
+
+# If true, Keystone uses an alternative method to determine if a user is
+# enabled or not by checking if they are a member of the
+# "user_enabled_emulation_dn" group. (boolean value)
+#user_enabled_emulation = false
+
+# DN of the group entry to hold enabled users when using enabled emulation.
+# (string value)
+#user_enabled_emulation_dn = <None>
+
+# Use the "group_member_attribute" and "group_objectclass" settings to
+# determine membership in the emulated enabled group. (boolean value)
+#user_enabled_emulation_use_group_config = false
+
+# List of additional LDAP attributes used for mapping additional attribute
+# mappings for users. Attribute mapping format is <ldap_attr>:<user_attr>,
+# where ldap_attr is the attribute in the LDAP entry and user_attr is the
+# Identity API attribute. (list value)
+#user_additional_attribute_mapping =
+
+# Search base for groups. Defaults to the suffix value. (string value)
+#group_tree_dn = <None>
+
+# LDAP search filter for groups. (string value)
+#group_filter = <None>
+
+# LDAP objectclass for groups. (string value)
+#group_objectclass = groupOfNames
+
+# LDAP attribute mapped to group id. (string value)
+#group_id_attribute = cn
+
+# LDAP attribute mapped to group name. (string value)
+#group_name_attribute = ou
+
+# LDAP attribute mapped to show group membership. (string value)
+#group_member_attribute = member
+
+# LDAP attribute mapped to group description. (string value)
+#group_desc_attribute = description
+
+# List of attributes stripped off the group on update. (list value)
+#group_attribute_ignore =
+
+# Allow group creation in LDAP backend. (boolean value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Write support for Identity LDAP backends has been deprecated in the M
+# release and will be removed in the O release.
+#group_allow_create = true
+
+# Allow group update in LDAP backend. (boolean value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Write support for Identity LDAP backends has been deprecated in the M
+# release and will be removed in the O release.
+#group_allow_update = true
+
+# Allow group deletion in LDAP backend. (boolean value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Write support for Identity LDAP backends has been deprecated in the M
+# release and will be removed in the O release.
+#group_allow_delete = true
+
+# Additional attribute mappings for groups. Attribute mapping format is
+# <ldap_attr>:<user_attr>, where ldap_attr is the attribute in the LDAP entry
+# and user_attr is the Identity API attribute. (list value)
+#group_additional_attribute_mapping =
+
+# CA certificate file path for communicating with LDAP servers. (string value)
+#tls_cacertfile = <None>
+
+# CA certificate directory path for communicating with LDAP servers. (string
+# value)
+#tls_cacertdir = <None>
+
+# Enable TLS for communicating with LDAP servers. (boolean value)
+#use_tls = false
+
+# Specifies what checks to perform on client certificates in an incoming TLS
+# session. (string value)
+# Allowed values: demand, never, allow
+#tls_req_cert = demand
+
+# Enable LDAP connection pooling. (boolean value)
+#use_pool = true
+
+# Connection pool size. (integer value)
+#pool_size = 10
+
+# Maximum count of reconnect trials. (integer value)
+#pool_retry_max = 3
+
+# Time span in seconds to wait between two reconnect trials. (floating point
+# value)
+#pool_retry_delay = 0.1
+
+# Connector timeout in seconds. Value -1 indicates indefinite wait for
+# response. (integer value)
+#pool_connection_timeout = -1
+
+# Connection lifetime in seconds. (integer value)
+#pool_connection_lifetime = 600
+
+# Enable LDAP connection pooling for end user authentication. If use_pool is
+# disabled, then this setting is meaningless and is not used at all. (boolean
+# value)
+#use_auth_pool = true
+
+# End user auth connection pool size. (integer value)
+#auth_pool_size = 100
+
+# End user auth connection lifetime in seconds. (integer value)
+#auth_pool_connection_lifetime = 60
+
+# If the members of the group objectclass are user IDs rather than DNs, set
+# this to true. This is the case when using posixGroup as the group objectclass
+# and OpenDirectory. (boolean value)
+#group_members_are_ids = false
+
+
+[matchmaker_redis]
+
+#
+# From oslo.messaging
+#
+
+# Host to locate redis. (string value)
+#host = 127.0.0.1
+
+# Use this port to connect to redis host. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#port = 6379
+
+# Password for Redis server (optional). (string value)
+#password =
+
+# List of Redis Sentinel hosts (fault tolerance mode) e.g.
+# [host:port, host1:port ... ] (list value)
+#sentinel_hosts =
+
+# Redis replica set name. (string value)
+#sentinel_group_name = oslo-messaging-zeromq
+
+# Time in ms to wait between connection attempts. (integer value)
+#wait_timeout = 500
+
+# Time in ms to wait before the transaction is killed. (integer value)
+#check_timeout = 20000
+
+# Timeout in ms on blocking socket operations (integer value)
+#socket_timeout = 1000
+
+
+[memcache]
+
+#
+# From keystone
+#
+
+# Memcache servers in the format of "host:port". (list value)
+#servers = localhost:11211
+{%- if server.cache is defined %}
+{%- if server.cache.members is defined %}
+servers = {%- for member in server.cache.members %}{{ member.host }}:{{ member.port }}{% if not loop.last %},{% endif %}{%- endfor %}
+{%- else %}
+servers = ['{{ server.cache.host }}:{{ server.cache.port }}']
+{%- endif %}
+{%- endif %}
+
+# Number of seconds memcached server is considered dead before it is tried
+# again. This is used by the key value store system (e.g. token pooled
+# memcached persistence backend). (integer value)
+#dead_retry = 300
+
+# Timeout in seconds for every call to a server. This is used by the key value
+# store system (e.g. token pooled memcached persistence backend). (integer
+# value)
+#socket_timeout = 3
+
+# Max total number of open connections to every memcached server. This is used
+# by the key value store system (e.g. token pooled memcached persistence
+# backend). (integer value)
+#pool_maxsize = 10
+
+# Number of seconds a connection to memcached is held unused in the pool before
+# it is closed. This is used by the key value store system (e.g. token pooled
+# memcached persistence backend). (integer value)
+#pool_unused_timeout = 60
+
+# Number of seconds that an operation will wait to get a memcache client
+# connection. This is used by the key value store system (e.g. token pooled
+# memcached persistence backend). (integer value)
+#pool_connection_get_timeout = 10
+
+
+[oauth1]
+
+#
+# From keystone
+#
+
+# Entrypoint for the OAuth backend driver in the keystone.oauth1 namespace.
+# (string value)
+#driver = sql
+
+# Duration (in seconds) for the OAuth Request Token. (integer value)
+#request_token_duration = 28800
+
+# Duration (in seconds) for the OAuth Access Token. (integer value)
+#access_token_duration = 86400
+
+
+[os_inherit]
+
+#
+# From keystone
+#
+
+# role-assignment inheritance to projects from owning domain or from projects
+# higher in the hierarchy can be optionally disabled. In the future, this
+# option will be removed and the hierarchy will be always enabled. (boolean
+# value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: The option to enable the OS-INHERIT extension has been deprecated in
+# the M release and will be removed in the O release. The OS-INHERIT extension
+# will be enabled by default.
+#enabled = true
+
+
+[oslo_messaging_amqp]
+
+#
+# From oslo.messaging
+#
+
+# address prefix used when sending to a specific server (string value)
+# Deprecated group/name - [amqp1]/server_request_prefix
+#server_request_prefix = exclusive
+
+# address prefix used when broadcasting to all servers (string value)
+# Deprecated group/name - [amqp1]/broadcast_prefix
+#broadcast_prefix = broadcast
+
+# address prefix when sending to any server in group (string value)
+# Deprecated group/name - [amqp1]/group_request_prefix
+#group_request_prefix = unicast
+
+# Name for the AMQP container (string value)
+# Deprecated group/name - [amqp1]/container_name
+#container_name = <None>
+
+# Timeout for inactive connections (in seconds) (integer value)
+# Deprecated group/name - [amqp1]/idle_timeout
+#idle_timeout = 0
+
+# Debug: dump AMQP frames to stdout (boolean value)
+# Deprecated group/name - [amqp1]/trace
+#trace = false
+
+# CA certificate PEM file to verify server certificate (string value)
+# Deprecated group/name - [amqp1]/ssl_ca_file
+#ssl_ca_file =
+
+# Identifying certificate PEM file to present to clients (string value)
+# Deprecated group/name - [amqp1]/ssl_cert_file
+#ssl_cert_file =
+
+# Private key PEM file used to sign cert_file certificate (string value)
+# Deprecated group/name - [amqp1]/ssl_key_file
+#ssl_key_file =
+
+# Password for decrypting ssl_key_file (if encrypted) (string value)
+# Deprecated group/name - [amqp1]/ssl_key_password
+#ssl_key_password = <None>
+
+# Accept clients using either SSL or plain TCP (boolean value)
+# Deprecated group/name - [amqp1]/allow_insecure_clients
+#allow_insecure_clients = false
+
+# Space separated list of acceptable SASL mechanisms (string value)
+# Deprecated group/name - [amqp1]/sasl_mechanisms
+#sasl_mechanisms =
+
+# Path to directory that contains the SASL configuration (string value)
+# Deprecated group/name - [amqp1]/sasl_config_dir
+#sasl_config_dir =
+
+# Name of configuration file (without .conf suffix) (string value)
+# Deprecated group/name - [amqp1]/sasl_config_name
+#sasl_config_name =
+
+# User name for message broker authentication (string value)
+# Deprecated group/name - [amqp1]/username
+#username =
+
+# Password for message broker authentication (string value)
+# Deprecated group/name - [amqp1]/password
+#password =
+
+
+[oslo_messaging_notifications]
+
+#
+# From oslo.messaging
+#
+
+# The Drivers(s) to handle sending notifications. Possible values are
+# messaging, messagingv2, routing, log, test, noop (multi valued)
+# Deprecated group/name - [DEFAULT]/notification_driver
+#driver =
+{%- if server.notification %}
+driver=messagingv2
+{%- endif %}
+
+# A URL representing the messaging driver to use for notifications. If not set,
+# we fall back to the same configuration used for RPC. (string value)
+# Deprecated group/name - [DEFAULT]/notification_transport_url
+#transport_url = <None>
+
+# AMQP topic used for OpenStack notifications. (list value)
+# Deprecated group/name - [rpc_notifier2]/topics
+# Deprecated group/name - [DEFAULT]/notification_topics
+#topics = notifications
+
+
+[oslo_messaging_rabbit]
+
+#
+# From oslo.messaging
+#
+{%- if server.notification %}
+# Use durable queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/amqp_durable_queues
+# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
+#amqp_durable_queues = false
+
+# Auto-delete queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/amqp_auto_delete
+#amqp_auto_delete = false
+
+# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
+# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
+# distributions. (string value)
+# Deprecated group/name - [DEFAULT]/kombu_ssl_version
+#kombu_ssl_version =
+
+# SSL key file (valid only if SSL enabled). (string value)
+# Deprecated group/name - [DEFAULT]/kombu_ssl_keyfile
+#kombu_ssl_keyfile =
+
+# SSL cert file (valid only if SSL enabled). (string value)
+# Deprecated group/name - [DEFAULT]/kombu_ssl_certfile
+#kombu_ssl_certfile =
+
+# SSL certification authority file (valid only if SSL enabled). (string value)
+# Deprecated group/name - [DEFAULT]/kombu_ssl_ca_certs
+#kombu_ssl_ca_certs =
+
+# How long to wait before reconnecting in response to an AMQP consumer cancel
+# notification. (floating point value)
+# Deprecated group/name - [DEFAULT]/kombu_reconnect_delay
+#kombu_reconnect_delay = 1.0
+
+# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not
+# be used. This option may notbe available in future versions. (string value)
+#kombu_compression = <None>
+
+# How long to wait a missing client beforce abandoning to send it its replies.
+# This value should not be longer than rpc_response_timeout. (integer value)
+# Deprecated group/name - [DEFAULT]/kombu_reconnect_timeout
+#kombu_missing_consumer_retry_timeout = 60
+
+# Determines how the next RabbitMQ node is chosen in case the one we are
+# currently connected to becomes unavailable. Takes effect only if more than
+# one RabbitMQ node is provided in config. (string value)
+# Allowed values: round-robin, shuffle
+#kombu_failover_strategy = round-robin
+
+# The RabbitMQ broker address where a single node is used. (string value)
+# Deprecated group/name - [DEFAULT]/rabbit_host
+#rabbit_host = localhost
+rabbit_host = {{ server.message_queue.host }}
+
+# The RabbitMQ broker port where a single node is used. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+# Deprecated group/name - [DEFAULT]/rabbit_port
+#rabbit_port = 5672
+rabbit_port = {{ server.message_queue.port }}
+
+# RabbitMQ HA cluster host:port pairs. (list value)
+# Deprecated group/name - [DEFAULT]/rabbit_hosts
+#rabbit_hosts = $rabbit_host:$rabbit_port
+
+# Connect over SSL for RabbitMQ. (boolean value)
+# Deprecated group/name - [DEFAULT]/rabbit_use_ssl
+#rabbit_use_ssl = false
+
+# The RabbitMQ userid. (string value)
+# Deprecated group/name - [DEFAULT]/rabbit_userid
+#rabbit_userid = guest
+rabbit_userid = {{ server.message_queue.user }}
+
+# The RabbitMQ password. (string value)
+# Deprecated group/name - [DEFAULT]/rabbit_password
+#rabbit_password = guest
+rabbit_password = {{ server.message_queue.password }}
+
+# The RabbitMQ login method. (string value)
+# Deprecated group/name - [DEFAULT]/rabbit_login_method
+#rabbit_login_method = AMQPLAIN
+
+# The RabbitMQ virtual host. (string value)
+# Deprecated group/name - [DEFAULT]/rabbit_virtual_host
+#rabbit_virtual_host = /
+rabbit_virtual_host = {{ server.message_queue.virtual_host }}
+
+# How frequently to retry connecting with RabbitMQ. (integer value)
+#rabbit_retry_interval = 1
+
+# How long to backoff for between retries when connecting to RabbitMQ. (integer
+# value)
+# Deprecated group/name - [DEFAULT]/rabbit_retry_backoff
+#rabbit_retry_backoff = 2
+
+# Maximum interval of RabbitMQ connection retries. Default is 30 seconds.
+# (integer value)
+#rabbit_interval_max = 30
+
+# Maximum number of RabbitMQ connection retries. Default is 0 (infinite retry
+# count). (integer value)
+# Deprecated group/name - [DEFAULT]/rabbit_max_retries
+#rabbit_max_retries = 0
+
+# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this
+# option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring
+# is no longer controlled by the x-ha-policy argument when declaring a queue.
+# If you just want to make sure that all queues (except  those with auto-
+# generated names) are mirrored across all nodes, run: "rabbitmqctl set_policy
+# HA '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value)
+# Deprecated group/name - [DEFAULT]/rabbit_ha_queues
+#rabbit_ha_queues = false
+
+# Positive integer representing duration in seconds for queue TTL (x-expires).
+# Queues which are unused for the duration of the TTL are automatically
+# deleted. The parameter affects only reply and fanout queues. (integer value)
+# Minimum value: 1
+#rabbit_transient_queues_ttl = 1800
+
+# Specifies the number of messages to prefetch. Setting to zero allows
+# unlimited messages. (integer value)
+#rabbit_qos_prefetch_count = 0
+
+# Number of seconds after which the Rabbit broker is considered down if
+# heartbeat's keep-alive fails (0 disable the heartbeat). EXPERIMENTAL (integer
+# value)
+#heartbeat_timeout_threshold = 60
+heartbeat_timeout_threshold = 0
+
+# How often times during the heartbeat_timeout_threshold we check the
+# heartbeat. (integer value)
+#heartbeat_rate = 2
+heartbeat_rate = 2
+
+# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake (boolean value)
+# Deprecated group/name - [DEFAULT]/fake_rabbit
+#fake_rabbit = false
+
+# Maximum number of channels to allow (integer value)
+#channel_max = <None>
+
+# The maximum byte size for an AMQP frame (integer value)
+#frame_max = <None>
+
+# How often to send heartbeats for consumer's connections (integer value)
+#heartbeat_interval = 1
+
+# Enable SSL (boolean value)
+#ssl = <None>
+
+# Arguments passed to ssl.wrap_socket (dict value)
+#ssl_options = <None>
+
+# Set socket timeout in seconds for connection's socket (floating point value)
+#socket_timeout = 0.25
+
+# Set TCP_USER_TIMEOUT in seconds for connection's socket (floating point
+# value)
+#tcp_user_timeout = 0.25
+
+# Set delay for reconnection to some host which has connection error (floating
+# point value)
+#host_connection_reconnect_delay = 0.25
+
+# Maximum number of connections to keep queued. (integer value)
+#pool_max_size = 10
+
+# Maximum number of connections to create above `pool_max_size`. (integer
+# value)
+#pool_max_overflow = 0
+
+# Default number of seconds to wait for a connections to available (integer
+# value)
+#pool_timeout = 30
+
+# Lifetime of a connection (since creation) in seconds or None for no
+# recycling. Expired connections are closed on acquire. (integer value)
+#pool_recycle = 600
+
+# Threshold at which inactive (since release) connections are considered stale
+# in seconds or None for no staleness. Stale connections are closed on acquire.
+# (integer value)
+#pool_stale = 60
+
+# Persist notification messages. (boolean value)
+#notification_persistence = false
+
+# Exchange name for for sending notifications (string value)
+#default_notification_exchange = ${control_exchange}_notification
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# notification listener. (integer value)
+#notification_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during sending
+# notification, -1 means infinite retry. (integer value)
+#default_notification_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during sending
+# notification message (floating point value)
+#notification_retry_delay = 0.25
+
+# Time to live for rpc queues without consumers in seconds. (integer value)
+#rpc_queue_expiration = 60
+
+# Exchange name for sending RPC messages (string value)
+#default_rpc_exchange = ${control_exchange}_rpc
+
+# Exchange name for receiving RPC replies (string value)
+#rpc_reply_exchange = ${control_exchange}_rpc_reply
+
+# Max number of not acknowledged message which RabbitMQ can send to rpc
+# listener. (integer value)
+#rpc_listener_prefetch_count = 100
+
+# Max number of not acknowledged message which RabbitMQ can send to rpc reply
+# listener. (integer value)
+#rpc_reply_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during sending
+# reply. -1 means infinite retry during rpc_timeout (integer value)
+#rpc_reply_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during sending
+# reply. (floating point value)
+#rpc_reply_retry_delay = 0.25
+
+# Reconnecting retry count in case of connectivity problem during sending RPC
+# message, -1 means infinite retry. If actual retry attempts in not 0 the rpc
+# request could be processed more then one time (integer value)
+#default_rpc_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during sending RPC
+# message (floating point value)
+#rpc_retry_delay = 0.25
+{%- endif %}
+
+
+[oslo_middleware]
+
+#
+# From oslo.middleware
+#
+
+# The maximum body size for each  request, in bytes. (integer value)
+# Deprecated group/name - [DEFAULT]/osapi_max_request_body_size
+# Deprecated group/name - [DEFAULT]/max_request_body_size
+#max_request_body_size = 114688
+
+# The HTTP Header that will be used to determine what the original request
+# protocol scheme was, even if it was hidden by an SSL termination proxy.
+# (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#secure_proxy_ssl_header = X-Forwarded-Proto
+
+
+[oslo_policy]
+
+#
+# From oslo.policy
+#
+
+# The JSON file that defines policies. (string value)
+# Deprecated group/name - [DEFAULT]/policy_file
+#policy_file = policy.json
+
+# Default rule. Enforced when a requested rule is not found. (string value)
+# Deprecated group/name - [DEFAULT]/policy_default_rule
+#policy_default_rule = default
+
+# Directories where policy configuration files are stored. They can be relative
+# to any directory in the search path defined by the config_dir option, or
+# absolute paths. The file defined by policy_file must exist for these
+# directories to be searched.  Missing or empty directories are ignored. (multi
+# valued)
+# Deprecated group/name - [DEFAULT]/policy_dirs
+#policy_dirs = policy.d
+
+
+[paste_deploy]
+
+#
+# From keystone
+#
+
+# Name of the paste configuration file that defines the available pipelines.
+# (string value)
+#config_file = keystone-paste.ini
+
+
+[policy]
+
+#
+# From keystone
+#
+
+# Entrypoint for the policy backend driver in the keystone.policy namespace.
+# Supplied drivers are rules and sql. (string value)
+#driver = sql
+
+# Maximum number of entities that will be returned in a policy collection.
+# (integer value)
+#list_limit = <None>
+
+
+[resource]
+
+#
+# From keystone
+#
+
+# Entrypoint for the resource backend driver in the keystone.resource
+# namespace. Only an SQL driver is supplied. If a resource driver is not
+# specified, the assignment driver will choose the resource driver. (string
+# value)
+#driver = <None>
+
+# Toggle for resource caching. This has no effect unless global caching is
+# enabled. (boolean value)
+# Deprecated group/name - [assignment]/caching
+#caching = true
+
+# TTL (in seconds) to cache resource data. This has no effect unless global
+# caching is enabled. (integer value)
+# Deprecated group/name - [assignment]/cache_time
+#cache_time = <None>
+
+# Maximum number of entities that will be returned in a resource collection.
+# (integer value)
+# Deprecated group/name - [assignment]/list_limit
+#list_limit = <None>
+
+# Name of the domain that owns the `admin_project_name`. Defaults to None.
+# (string value)
+#admin_project_domain_name = <None>
+
+# Special project for performing administrative operations on remote services.
+# Tokens scoped to this project will contain the key/value
+# `is_admin_project=true`. Defaults to None. (string value)
+#admin_project_name = <None>
+
+# Whether the names of projects are restricted from containing url reserved
+# characters. If set to new, attempts to create or update a project with a url
+# unsafe name will return an error. In addition, if set to strict, attempts to
+# scope a token using an unsafe project name will return an error. (string
+# value)
+# Allowed values: off, new, strict
+#project_name_url_safe = off
+
+# Whether the names of domains are restricted from containing url reserved
+# characters. If set to new, attempts to create or update a domain with a url
+# unsafe name will return an error. In addition, if set to strict, attempts to
+# scope a token using a domain name which is unsafe will return an error.
+# (string value)
+# Allowed values: off, new, strict
+#domain_name_url_safe = off
+
+
+[revoke]
+
+#
+# From keystone
+#
+
+# Entrypoint for an implementation of the backend for persisting revocation
+# events in the keystone.revoke namespace. Supplied drivers are kvs and sql.
+# (string value)
+#driver = sql
+
+# This value (calculated in seconds) is added to token expiration before a
+# revocation event may be removed from the backend. (integer value)
+#expiration_buffer = 1800
+
+# Toggle for revocation event caching. This has no effect unless global caching
+# is enabled. (boolean value)
+#caching = true
+
+# Time to cache the revocation list and the revocation events (in seconds).
+# This has no effect unless global and token caching are enabled. (integer
+# value)
+# Deprecated group/name - [token]/revocation_cache_time
+#cache_time = 3600
+
+
+[role]
+
+#
+# From keystone
+#
+
+# Entrypoint for the role backend driver in the keystone.role namespace.
+# Supplied drivers are ldap and sql. (string value)
+#driver = <None>
+
+# Toggle for role caching. This has no effect unless global caching is enabled.
+# (boolean value)
+#caching = true
+
+# TTL (in seconds) to cache role data. This has no effect unless global caching
+# is enabled. (integer value)
+#cache_time = <None>
+
+# Maximum number of entities that will be returned in a role collection.
+# (integer value)
+#list_limit = <None>
+
+
+[saml]
+
+#
+# From keystone
+#
+
+# Default TTL, in seconds, for any generated SAML assertion created by
+# Keystone. (integer value)
+#assertion_expiration_time = 3600
+
+# Binary to be called for XML signing. Install the appropriate package, specify
+# absolute path or adjust your PATH environment variable if the binary cannot
+# be found. (string value)
+#xmlsec1_binary = xmlsec1
+
+# Path of the certfile for SAML signing. For non-production environments, you
+# may be interested in using `keystone-manage pki_setup` to generate self-
+# signed certificates. Note, the path cannot contain a comma. (string value)
+#certfile = /etc/keystone/ssl/certs/signing_cert.pem
+
+# Path of the keyfile for SAML signing. Note, the path cannot contain a comma.
+# (string value)
+#keyfile = /etc/keystone/ssl/private/signing_key.pem
+
+# Entity ID value for unique Identity Provider identification. Usually FQDN is
+# set with a suffix. A value is required to generate IDP Metadata. For example:
+# https://keystone.example.com/v3/OS-FEDERATION/saml2/idp (string value)
+#idp_entity_id = <None>
+
+# Identity Provider Single-Sign-On service value, required in the Identity
+# Provider's metadata. A value is required to generate IDP Metadata. For
+# example: https://keystone.example.com/v3/OS-FEDERATION/saml2/sso (string
+# value)
+#idp_sso_endpoint = <None>
+
+# Language used by the organization. (string value)
+#idp_lang = en
+
+# Organization name the installation belongs to. (string value)
+#idp_organization_name = <None>
+
+# Organization name to be displayed. (string value)
+#idp_organization_display_name = <None>
+
+# URL of the organization. (string value)
+#idp_organization_url = <None>
+
+# Company of contact person. (string value)
+#idp_contact_company = <None>
+
+# Given name of contact person (string value)
+#idp_contact_name = <None>
+
+# Surname of contact person. (string value)
+#idp_contact_surname = <None>
+
+# Email address of contact person. (string value)
+#idp_contact_email = <None>
+
+# Telephone number of contact person. (string value)
+#idp_contact_telephone = <None>
+
+# The contact type describing the main point of contact for the identity
+# provider. (string value)
+# Allowed values: technical, support, administrative, billing, other
+#idp_contact_type = other
+
+# Path to the Identity Provider Metadata file. This file should be generated
+# with the keystone-manage saml_idp_metadata command. (string value)
+#idp_metadata_path = /etc/keystone/saml2_idp_metadata.xml
+
+# The prefix to use for the RelayState SAML attribute, used when generating ECP
+# wrapped assertions. (string value)
+#relay_state_prefix = ss:mem:
+
+
+[shadow_users]
+
+#
+# From keystone
+#
+
+# Entrypoint for the shadow users backend driver in the
+# keystone.identity.shadow_users namespace. (string value)
+#driver = sql
+
+
+[signing]
+
+#
+# From keystone
+#
+
+# Path of the certfile for token signing. For non-production environments, you
+# may be interested in using `keystone-manage pki_setup` to generate self-
+# signed certificates. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: PKI token support has been deprecated in the M release and will be
+# removed in the O release. Fernet or UUID tokens are recommended.
+#certfile = /etc/keystone/ssl/certs/signing_cert.pem
+
+# Path of the keyfile for token signing. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: PKI token support has been deprecated in the M release and will be
+# removed in the O release. Fernet or UUID tokens are recommended.
+#keyfile = /etc/keystone/ssl/private/signing_key.pem
+
+# Path of the CA for token signing. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: PKI token support has been deprecated in the M release and will be
+# removed in the O release. Fernet or UUID tokens are recommended.
+#ca_certs = /etc/keystone/ssl/certs/ca.pem
+
+# Path of the CA key for token signing. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: PKI token support has been deprecated in the M release and will be
+# removed in the O release. Fernet or UUID tokens are recommended.
+#ca_key = /etc/keystone/ssl/private/cakey.pem
+
+# Key size (in bits) for token signing cert (auto generated certificate).
+# (integer value)
+# Minimum value: 1024
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: PKI token support has been deprecated in the M release and will be
+# removed in the O release. Fernet or UUID tokens are recommended.
+#key_size = 2048
+
+# Days the token signing cert is valid for (auto generated certificate).
+# (integer value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: PKI token support has been deprecated in the M release and will be
+# removed in the O release. Fernet or UUID tokens are recommended.
+#valid_days = 3650
+
+# Certificate subject (auto generated certificate) for token signing. (string
+# value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: PKI token support has been deprecated in the M release and will be
+# removed in the O release. Fernet or UUID tokens are recommended.
+#cert_subject = /C=US/ST=Unset/L=Unset/O=Unset/CN=www.example.com
+
+
+[ssl]
+
+#
+# From keystone
+#
+
+# Path of the CA key file for SSL. (string value)
+#ca_key = /etc/keystone/ssl/private/cakey.pem
+
+# SSL key length (in bits) (auto generated certificate). (integer value)
+# Minimum value: 1024
+#key_size = 1024
+
+# Days the certificate is valid for once signed (auto generated certificate).
+# (integer value)
+#valid_days = 3650
+
+# SSL certificate subject (auto generated certificate). (string value)
+#cert_subject = /C=US/ST=Unset/L=Unset/O=Unset/CN=localhost
+
+
+[token]
+
+#
+# From keystone
+#
+
+# External auth mechanisms that should add bind information to token, e.g.,
+# kerberos,x509. (list value)
+#bind =
+
+# Enforcement policy on tokens presented to Keystone with bind information. One
+# of disabled, permissive, strict, required or a specifically required bind
+# mode, e.g., kerberos or x509 to require binding to that authentication.
+# (string value)
+#enforce_token_bind = permissive
+
+# Amount of time a token should remain valid (in seconds). (integer value)
+#expiration = 3600
+expiration = {{ server.tokens.expiration }}
+
+# Controls the token construction, validation, and revocation operations.
+# Entrypoint in the keystone.token.provider namespace. Core providers are
+# [fernet|pkiz|pki|uuid]. (string value)
+#provider = uuid
+{% if server.tokens.engine == 'fernet' %}
+provider = keystone.token.providers.fernet.Provider
+{% endif %}
+
+# Entrypoint for the token persistence backend driver in the
+# keystone.token.persistence namespace. Supplied drivers are kvs, memcache,
+# memcache_pool, and sql. (string value)
+#driver = sql
+driver = memcache_pool
+
+# Toggle for token system caching. This has no effect unless global caching is
+# enabled. (boolean value)
+#caching = true
+
+# Time to cache tokens (in seconds). This has no effect unless global and token
+# caching are enabled. (integer value)
+#cache_time = <None>
+
+# Revoke token by token identifier. Setting revoke_by_id to true enables
+# various forms of enumerating tokens, e.g. `list tokens for user`. These
+# enumerations are processed to determine the list of tokens to revoke. Only
+# disable if you are switching to using the Revoke extension with a backend
+# other than KVS, which stores events in memory. (boolean value)
+#revoke_by_id = true
+
+# Allow rescoping of scoped token. Setting allow_rescoped_scoped_token to false
+# prevents a user from exchanging a scoped token for any other token. (boolean
+# value)
+#allow_rescope_scoped_token = true
+
+# The hash algorithm to use for PKI tokens. This can be set to any algorithm
+# that hashlib supports. WARNING: Before changing this value, the auth_token
+# middleware must be configured with the hash_algorithms, otherwise token
+# revocation will not be processed correctly. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: PKI token support has been deprecated in the M release and will be
+# removed in the O release. Fernet or UUID tokens are recommended.
+#hash_algorithm = md5
+
+# Add roles to token that are not explicitly added, but that are linked
+# implicitly to other roles. (boolean value)
+#infer_roles = true
+
+
+[tokenless_auth]
+
+#
+# From keystone
+#
+
+# The list of trusted issuers to further filter the certificates that are
+# allowed to participate in the X.509 tokenless authorization. If the option is
+# absent then no certificates will be allowed. The naming format for the
+# attributes of a Distinguished Name(DN) must be separated by a comma and
+# contain no spaces. This configuration option may be repeated for multiple
+# values. For example: trusted_issuer=CN=john,OU=keystone,O=openstack
+# trusted_issuer=CN=mary,OU=eng,O=abc (multi valued)
+#trusted_issuer =
+
+# The protocol name for the X.509 tokenless authorization along with the option
+# issuer_attribute below can look up its corresponding mapping. (string value)
+#protocol = x509
+
+# The issuer attribute that is served as an IdP ID for the X.509 tokenless
+# authorization along with the protocol to look up its corresponding mapping.
+# It is the environment variable in the WSGI environment that references to the
+# issuer of the client certificate. (string value)
+#issuer_attribute = SSL_CLIENT_I_DN
+
+
+[trust]
+
+#
+# From keystone
+#
+
+# Delegation and impersonation features can be optionally disabled. (boolean
+# value)
+#enabled = true
+
+# Enable redelegation feature. (boolean value)
+#allow_redelegation = false
+
+# Maximum depth of trust redelegation. (integer value)
+#max_redelegation_count = 3
+
+# Entrypoint for the trust backend driver in the keystone.trust namespace.
+# (string value)
+#driver = sql
+
+[extra_headers]
+Distribution = Ubuntu
\ No newline at end of file
diff --git a/keystone/files/mitaka/keystone.conf.RedHat b/keystone/files/mitaka/keystone.conf.RedHat
new file mode 120000
index 0000000..4221824
--- /dev/null
+++ b/keystone/files/mitaka/keystone.conf.RedHat
@@ -0,0 +1 @@
+keystone.conf.Debian
\ No newline at end of file
diff --git a/keystone/files/mitaka/policy-v2.json b/keystone/files/mitaka/policy-v2.json
new file mode 100644
index 0000000..797af24
--- /dev/null
+++ b/keystone/files/mitaka/policy-v2.json
@@ -0,0 +1,198 @@
+{
+    "admin_required": "role:admin or is_admin:1",
+    "service_role": "role:service",
+    "service_or_admin": "rule:admin_required or rule:service_role",
+    "owner" : "user_id:%(user_id)s",
+    "admin_or_owner": "rule:admin_required or rule:owner",
+    "token_subject": "user_id:%(target.token.user_id)s",
+    "admin_or_token_subject": "rule:admin_required or rule:token_subject",
+    "service_admin_or_token_subject": "rule:service_or_admin or rule:token_subject",
+
+    "default": "rule:admin_required",
+
+    "identity:get_region": "",
+    "identity:list_regions": "",
+    "identity:create_region": "rule:admin_required",
+    "identity:update_region": "rule:admin_required",
+    "identity:delete_region": "rule:admin_required",
+
+    "identity:get_service": "rule:admin_required",
+    "identity:list_services": "rule:admin_required",
+    "identity:create_service": "rule:admin_required",
+    "identity:update_service": "rule:admin_required",
+    "identity:delete_service": "rule:admin_required",
+
+    "identity:get_endpoint": "rule:admin_required",
+    "identity:list_endpoints": "rule:admin_required",
+    "identity:create_endpoint": "rule:admin_required",
+    "identity:update_endpoint": "rule:admin_required",
+    "identity:delete_endpoint": "rule:admin_required",
+
+    "identity:get_domain": "rule:admin_required",
+    "identity:list_domains": "rule:admin_required",
+    "identity:create_domain": "rule:admin_required",
+    "identity:update_domain": "rule:admin_required",
+    "identity:delete_domain": "rule:admin_required",
+
+    "identity:get_project": "rule:admin_required or project_id:%(target.project.id)s",
+    "identity:list_projects": "rule:admin_required",
+    "identity:list_user_projects": "rule:admin_or_owner",
+    "identity:create_project": "rule:admin_required",
+    "identity:update_project": "rule:admin_required",
+    "identity:delete_project": "rule:admin_required",
+
+    "identity:get_user": "rule:admin_required",
+    "identity:list_users": "rule:admin_required",
+    "identity:create_user": "rule:admin_required",
+    "identity:update_user": "rule:admin_required",
+    "identity:delete_user": "rule:admin_required",
+    "identity:change_password": "rule:admin_or_owner",
+
+    "identity:get_group": "rule:admin_required",
+    "identity:list_groups": "rule:admin_required",
+    "identity:list_groups_for_user": "rule:admin_or_owner",
+    "identity:create_group": "rule:admin_required",
+    "identity:update_group": "rule:admin_required",
+    "identity:delete_group": "rule:admin_required",
+    "identity:list_users_in_group": "rule:admin_required",
+    "identity:remove_user_from_group": "rule:admin_required",
+    "identity:check_user_in_group": "rule:admin_required",
+    "identity:add_user_to_group": "rule:admin_required",
+
+    "identity:get_credential": "rule:admin_required",
+    "identity:list_credentials": "rule:admin_required",
+    "identity:create_credential": "rule:admin_required",
+    "identity:update_credential": "rule:admin_required",
+    "identity:delete_credential": "rule:admin_required",
+
+    "identity:ec2_get_credential": "rule:admin_required or (rule:owner and user_id:%(target.credential.user_id)s)",
+    "identity:ec2_list_credentials": "rule:admin_or_owner",
+    "identity:ec2_create_credential": "rule:admin_or_owner",
+    "identity:ec2_delete_credential": "rule:admin_required or (rule:owner and user_id:%(target.credential.user_id)s)",
+
+    "identity:get_role": "rule:admin_required",
+    "identity:list_roles": "rule:admin_required",
+    "identity:create_role": "rule:admin_required",
+    "identity:update_role": "rule:admin_required",
+    "identity:delete_role": "rule:admin_required",
+    "identity:get_domain_role": "rule:admin_required",
+    "identity:list_domain_roles": "rule:admin_required",
+    "identity:create_domain_role": "rule:admin_required",
+    "identity:update_domain_role": "rule:admin_required",
+    "identity:delete_domain_role": "rule:admin_required",
+
+    "identity:get_implied_role": "rule:admin_required ",
+    "identity:list_implied_roles": "rule:admin_required",
+    "identity:create_implied_role": "rule:admin_required",
+    "identity:delete_implied_role": "rule:admin_required",
+    "identity:list_role_inference_rules": "rule:admin_required",
+    "identity:check_implied_role": "rule:admin_required",
+
+    "identity:check_grant": "rule:admin_required",
+    "identity:list_grants": "rule:admin_required",
+    "identity:create_grant": "rule:admin_required",
+    "identity:revoke_grant": "rule:admin_required",
+
+    "identity:list_role_assignments": "rule:admin_required",
+    "identity:list_role_assignments_for_tree": "rule:admin_required",
+
+    "identity:get_policy": "rule:admin_required",
+    "identity:list_policies": "rule:admin_required",
+    "identity:create_policy": "rule:admin_required",
+    "identity:update_policy": "rule:admin_required",
+    "identity:delete_policy": "rule:admin_required",
+
+    "identity:check_token": "rule:admin_or_token_subject",
+    "identity:validate_token": "rule:service_admin_or_token_subject",
+    "identity:validate_token_head": "rule:service_or_admin",
+    "identity:revocation_list": "rule:service_or_admin",
+    "identity:revoke_token": "rule:admin_or_token_subject",
+
+    "identity:create_trust": "user_id:%(trust.trustor_user_id)s",
+    "identity:list_trusts": "",
+    "identity:list_roles_for_trust": "",
+    "identity:get_role_for_trust": "",
+    "identity:delete_trust": "",
+
+    "identity:create_consumer": "rule:admin_required",
+    "identity:get_consumer": "rule:admin_required",
+    "identity:list_consumers": "rule:admin_required",
+    "identity:delete_consumer": "rule:admin_required",
+    "identity:update_consumer": "rule:admin_required",
+
+    "identity:authorize_request_token": "rule:admin_required",
+    "identity:list_access_token_roles": "rule:admin_required",
+    "identity:get_access_token_role": "rule:admin_required",
+    "identity:list_access_tokens": "rule:admin_required",
+    "identity:get_access_token": "rule:admin_required",
+    "identity:delete_access_token": "rule:admin_required",
+
+    "identity:list_projects_for_endpoint": "rule:admin_required",
+    "identity:add_endpoint_to_project": "rule:admin_required",
+    "identity:check_endpoint_in_project": "rule:admin_required",
+    "identity:list_endpoints_for_project": "rule:admin_required",
+    "identity:remove_endpoint_from_project": "rule:admin_required",
+
+    "identity:create_endpoint_group": "rule:admin_required",
+    "identity:list_endpoint_groups": "rule:admin_required",
+    "identity:get_endpoint_group": "rule:admin_required",
+    "identity:update_endpoint_group": "rule:admin_required",
+    "identity:delete_endpoint_group": "rule:admin_required",
+    "identity:list_projects_associated_with_endpoint_group": "rule:admin_required",
+    "identity:list_endpoints_associated_with_endpoint_group": "rule:admin_required",
+    "identity:get_endpoint_group_in_project": "rule:admin_required",
+    "identity:list_endpoint_groups_for_project": "rule:admin_required",
+    "identity:add_endpoint_group_to_project": "rule:admin_required",
+    "identity:remove_endpoint_group_from_project": "rule:admin_required",
+
+    "identity:create_identity_provider": "rule:admin_required",
+    "identity:list_identity_providers": "rule:admin_required",
+    "identity:get_identity_providers": "rule:admin_required",
+    "identity:update_identity_provider": "rule:admin_required",
+    "identity:delete_identity_provider": "rule:admin_required",
+
+    "identity:create_protocol": "rule:admin_required",
+    "identity:update_protocol": "rule:admin_required",
+    "identity:get_protocol": "rule:admin_required",
+    "identity:list_protocols": "rule:admin_required",
+    "identity:delete_protocol": "rule:admin_required",
+
+    "identity:create_mapping": "rule:admin_required",
+    "identity:get_mapping": "rule:admin_required",
+    "identity:list_mappings": "rule:admin_required",
+    "identity:delete_mapping": "rule:admin_required",
+    "identity:update_mapping": "rule:admin_required",
+
+    "identity:create_service_provider": "rule:admin_required",
+    "identity:list_service_providers": "rule:admin_required",
+    "identity:get_service_provider": "rule:admin_required",
+    "identity:update_service_provider": "rule:admin_required",
+    "identity:delete_service_provider": "rule:admin_required",
+
+    "identity:get_auth_catalog": "",
+    "identity:get_auth_projects": "",
+    "identity:get_auth_domains": "",
+
+    "identity:list_projects_for_groups": "",
+    "identity:list_domains_for_groups": "",
+
+    "identity:list_revoke_events": "",
+
+    "identity:create_policy_association_for_endpoint": "rule:admin_required",
+    "identity:check_policy_association_for_endpoint": "rule:admin_required",
+    "identity:delete_policy_association_for_endpoint": "rule:admin_required",
+    "identity:create_policy_association_for_service": "rule:admin_required",
+    "identity:check_policy_association_for_service": "rule:admin_required",
+    "identity:delete_policy_association_for_service": "rule:admin_required",
+    "identity:create_policy_association_for_region_and_service": "rule:admin_required",
+    "identity:check_policy_association_for_region_and_service": "rule:admin_required",
+    "identity:delete_policy_association_for_region_and_service": "rule:admin_required",
+    "identity:get_policy_for_endpoint": "rule:admin_required",
+    "identity:list_endpoints_for_policy": "rule:admin_required",
+
+    "identity:create_domain_config": "rule:admin_required",
+    "identity:get_domain_config": "rule:admin_required",
+    "identity:update_domain_config": "rule:admin_required",
+    "identity:delete_domain_config": "rule:admin_required",
+    "identity:get_domain_config_default": "rule:admin_required"
+}
diff --git a/metadata/service/server/cluster.yml b/metadata/service/server/cluster.yml
index 5d1bbc1..d01af2c 100644
--- a/metadata/service/server/cluster.yml
+++ b/metadata/service/server/cluster.yml
@@ -32,6 +32,14 @@
         engine: cache
         expiration: 43200
         location: /etc/keystone/fernet-keys/
+      message_queue:
+        engine: rabbitmq
+        host: ${_param:cluster_vip_address}
+        port: 5672
+        user: openstack
+        password: ${_param:rabbitmq_openstack_password}
+        virtual_host: '/openstack'
+        ha_queues: true
       cache:
         engine: memcached
         members: 
diff --git a/metadata/service/server/single.yml b/metadata/service/server/single.yml
index 09d98a1..3e72a88 100644
--- a/metadata/service/server/single.yml
+++ b/metadata/service/server/single.yml
@@ -30,6 +30,14 @@
         engine: cache
         expiration: 43200
         location: /etc/keystone/fernet-keys/
+      message_queue:
+        engine: rabbitmq
+        host: ${_param:single_address}
+        port: 5672
+        user: openstack
+        password: ${_param:rabbitmq_openstack_password}
+        virtual_host: '/openstack'
+        ha_queues: true
       cache:
         engine: memcached
         members: 
diff --git a/tests/pillar/cluster.sls b/tests/pillar/cluster.sls
index c199b7a..da3d86d 100644
--- a/tests/pillar/cluster.sls
+++ b/tests/pillar/cluster.sls
@@ -25,6 +25,15 @@
       engine: cache
       expiration: 86400
       location: /etc/keystone/fernet-keys/
+    notification: true
+    message_queue:
+      engine: rabbitmq
+      host: 127.0.0.1
+      port: 5672
+      user: openstack
+      password: password
+      virtual_host: '/openstack'
+      ha_queues: true
     cache:
       engine: memcached
       members: 
diff --git a/tests/pillar/single.sls b/tests/pillar/single.sls
index 912d6c5..e81487c 100644
--- a/tests/pillar/single.sls
+++ b/tests/pillar/single.sls
@@ -21,6 +21,15 @@
       name: 'keystone'
       password: 'password'
       user: 'keystone'
+    notification: true
+    message_queue:
+      engine: rabbitmq
+      host: 127.0.0.1
+      port: 5672
+      user: openstack
+      password: password
+      virtual_host: '/openstack'
+      ha_queues: true
     tokens:
       engine: cache
       expiration: 86400