diff --git a/CHANGELOG.rst b/CHANGELOG.rst
new file mode 100644
index 0000000..fa0bbc5
--- /dev/null
+++ b/CHANGELOG.rst
@@ -0,0 +1,7 @@
+
+iptables-formula
+================
+
+0.0.1 (2015-08-03)
+
+- Initial formula setup
\ No newline at end of file
diff --git a/LICENSE b/LICENSE
new file mode 100644
index 0000000..6f2b42f
--- /dev/null
+++ b/LICENSE
@@ -0,0 +1,13 @@
+Copyright (c) 2014-2015 tcp cloud a.s.
+
+Licensed under the Apache License, Version 2.0 (the "License");
+you may not use this file except in compliance with the License.
+You may obtain a copy of the License at
+
+   http://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing, software
+distributed under the License is distributed on an "AS IS" BASIS,
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+See the License for the specific language governing permissions and
+limitations under the License.
\ No newline at end of file
diff --git a/README.rst b/README.rst
new file mode 100644
index 0000000..1a2d8e1
--- /dev/null
+++ b/README.rst
@@ -0,0 +1,308 @@
+
+================
+iptables formula
+================
+
+iptables is a user-space application program that allows a system administrator to configure the tables provided by the Linux kernel firewall and the chains and rules it stores.
+
+Sample pillars
+==============
+
+Simple INPUT chain httpd ACCEPT rule on position 1
+
+.. code-block:: yaml
+
+    iptables:
+      service:
+        enabled: false
+          chain:
+            INPUT:
+              enabled: true
+              rule:
+                httpd:
+                  position: 1
+                  table: filter
+                  jump: ACCEPT
+                  family: ipv6
+                  match: state
+                  connection_state: NEW
+                  protocol: tcp
+                  source_port: 1025:65535
+                  destination_port: 80
+
+Read more
+=========
+
+* http://docs.saltstack.com/en/latest/ref/states/all/salt.states.iptables.html
+* https://help.ubuntu.com/community/IptablesHowTo
+* http://wiki.centos.org/HowTos/Network/IPTables
+
+.. code-block:: yaml
+
+  chain:
+    PREROUTING:
+      enabled: true
+      rule:
+        dnat_ssh_185:
+          table: filter
+          jump: DNAT
+          match: tcp
+          protocol: tcp
+          destination_network: 185.22.97.132/32
+          destination_port: 20022
+          to_destination:
+            host: 10.0.110.38
+            port: 22
+          comment: Premapovani ssh zvenku na standardni port
+        dnat_ssh_10:
+          table: filter
+          jump: DNAT
+          match: tcp
+          protocol: tcp
+          destination_network: 10.0.110.38/32
+          destination_port: 20022
+          to_destination:
+            host: 10.0.110.38
+            port: 22
+          comment: Premapovani ssh 20022-22
+        redirect_vpn_185:
+          table: filter
+          jump: REDIRECT
+          match: udp
+          protocol: udp
+          destination_network: 185.22.97.132/32
+          destination_port: 3690
+          to_port:
+            port: 1194
+          comment: Presmerovani VPN portu 3690 > 1194
+    POSTROUTING:
+      enabled: true
+      rule:
+        snat_vpn_185:
+          table: filter
+          jump: SNAT
+          match: udp
+          protocol: udp
+          source_network: 10.8.0.0/24
+          out_interface: eth1
+          to_source:
+            host: 185.22.97.132
+          comment: NAT pro klienty administratorske VPNky
+    INPUT:
+      enabled: true
+      rule:
+        allow_conn_established:
+          table: filter
+          jump: ACCEPT
+          match: state
+          connection_state: RELATED,ESTABLISHED
+          comment: Vsechen provoz souvisejici s povolenymi pravidly pustit
+        allow_proto_icmp:
+          table: filter
+          jump: ACCEPT
+          protocol: icmp
+          comment: ICMP nechceme filtrovat
+        allow_iface_lo:
+          table: filter
+          jump: ACCEPT
+          in_interface: lo
+          comment: Lokalni smycka muze vsechno
+        allow_ssh_10.0.110.38:
+          table: filter
+          jump: ACCEPT
+          match: tcp
+          protocol: tcp
+          destination_network: 10.0.110.38/32
+          destination_port: 22
+          comment: SSH z lokalni site
+        allow_ssh_10.8.0.1:
+          table: filter
+          jump: ACCEPT
+          match: tcp
+          protocol: tcp
+          destination_network: 10.8.0.1/32
+          destination_port: 22
+          comment: SSH z VPN site
+        allow_ssh_private_10:
+          table: filter
+          jump: ACCEPT
+          match: state
+          connection_state: NEW
+          source_network: 10.0.0.0/8
+          destination_network: 185.22.97.132/32
+          destination_port: 22
+          comment: ssh z vnitrni site 10.0.0.0/8 povolit na obvykly protokol
+        allow_ssh_private_192:
+          table: filter
+          jump: ACCEPT
+          match: state
+          connection_state: NEW
+          source_network: 192.0.0.0/8
+          destination_network: 185.22.97.132/32
+          destination_port: 22
+          comment: ssh z vnitrni site 192.0.0.0/8 povolit na obvykly protokol
+        allow_ssh_private_172:
+          table: filter
+          jump: ACCEPT
+          match: state
+          connection_state: NEW
+          source_network: 172.16.162.0/24
+          destination_network: 185.22.97.132/32
+          destination_port: 22
+          comment: ssh z vnitrni site 10.0.0.0/8 povolit na obvykly protokol
+        allow_ssh_private_185:
+          table: filter
+          jump: ACCEPT
+          match: state
+          connection_state: NEW
+          source_network: 185.22.97.0/24
+          destination_network: 185.22.97.132/32
+          destination_port: 22
+          comment: ssh z vnitrni site 192.0.0.0/8 povolit na obvykly protokol
+        deny_ssh_public:
+          table: filter
+          jump: DROP
+          match: tpc
+          protocol: tcp
+          destination_network: 185.22.97.132/32
+          destination_port: 22
+          comment: ssh z vnejsi site na obvykly port ZAKAZAT, budeme ho presmerovavat
+        allow_ssh_public_redirect:
+          table: filter
+          jump: ACCEPT
+          match: tpc
+          protocol: tcp
+          destination_port: 22022
+          comment: nahradni ssh port bude presmerovan na 22 pokud se prijde z vnejsi site
+        allow_zabbix_server:
+          table: filter
+          jump: ACCEPT
+          match: tpc
+          protocol: tcp
+          source_network: 10.0.110.36/32
+          destination_port: 10050
+          comment: zabbix monitoring
+        allow_tsmc_web_10:
+          table: filter
+          jump: ACCEPT
+          match: tpc
+          protocol: tcp
+          source_network: 10.0.0.0/8
+          destination_port: 1581
+          comment: tsm client web gui
+        allow_tsmc_37010_10:
+          table: filter
+          jump: ACCEPT
+          match: state
+          protocol: tcp
+          source_network: 10.0.0.0/8
+          destination_port: 37010
+          comment: tsmc web
+        allow_tsmc_39876_10:
+          table: filter
+          jump: ACCEPT
+          match: state
+          protocol: tcp
+          source_network: 10.0.0.0/8
+          destination_port: 39876
+          comment: tsmc web
+        allow_tsm_web_172:
+          table: filter
+          jump: ACCEPT
+          match: tpc
+          protocol: tcp
+          source_network: 172.16.162.0/24
+          destination_port: 1581
+          comment: tsm client web gui
+        allow_tsmc_37010_172:
+          table: filter
+          jump: ACCEPT
+          match: state
+          protocol: tcp
+          source_network: 172.16.162.0/24
+          destination_port: 37010
+          comment: tsmc web
+        allow_tsmc_39876_172:
+          table: filter
+          jump: ACCEPT
+          match: state
+          protocol: tcp
+          source_network: 172.16.162.0/24
+          destination_port: 39876
+          comment: tsmc web
+        allow_vpn_public:
+          table: filter
+          jump: ACCEPT
+          match: state
+          connection_state: NEW
+          destination_port: 1194
+          comment: Povolime VPN odkudkoli
+        reject_rest:
+          table: filter
+          jump: REJECT
+          comment: Zdvorile odmitame ostatni komunikaci; --reject-with icmp-host-prohibited neni
+    FORWARD:
+      enabled: true
+      rule:
+        allow_conn_established:
+          table: filter
+          jump: ACCEPT
+          match: state
+          connection_state: RELATED,ESTABLISHED
+          comment: Vsechen provoz souvisejici s povolenymi pravidly pustit
+        snat_vpn_185:
+          table: filter
+          jump: SNAT
+          match: udp
+          protocol: udp
+          source_network: 10.8.0.0/24
+          out_interface: eth1
+          to_source:
+            host: 185.22.97.132
+          comment: NAT pro klienty administratorske VPNky
+        accept_net_10.0.110.0_vpn:
+          table: filter
+          jump: ACCEPT
+          source_network: 10.0.110.0/24
+          destionation_network: 10.8.0.0/24
+          comment: vnitrni komunikace management
+        accept_net_10.10.0.0_vpn:
+          table: filter
+          jump: ACCEPT
+          source_network: 10.10.0.0/16
+          destionation_network: 10.8.0.0/24
+          comment: vnitrni komunikace management
+        accept_net_10.0.101.0_vpn:
+          table: filter
+          jump: ACCEPT
+          source_network: 10.0.101.0/24
+          destionation_network: 10.8.0.0/24
+          comment: vnitrni komunikace VLAN1501
+        accept_net_10.0.102.0_vpn:
+          table: filter
+          jump: ACCEPT
+          source_network: 10.0.102.0/24
+          destionation_network: 10.8.0.0/24
+          comment: vnitrni komunikace VLAN1502
+        accept_net_10.0.103.0_vpn:
+          table: filter
+          jump: ACCEPT
+          source_network: 10.0.103.0/24
+          destionation_network: 10.8.0.0/24
+          comment: vnitrni komunikace VLAN1503
+        accept_net_10.0.106.0_vpn:
+          table: filter
+          jump: ACCEPT
+          source_network: 10.0.106.0/24
+          destionation_network: 10.8.0.0/24
+          comment: vnitrni komunikace VLAN1506
+        accept_net_10.0.110.0:
+          table: filter
+          jump: ACCEPT
+          source_network: 10.0.110.0/24
+          comment: Vse ze site 10.0.110.0
+        accept_net_10.8.0.0:
+          table: filter
+          jump: ACCEPT
+          source_network: 10.8.0.0/24
+          comment: Z teto VPN se smi skoro vsechno
diff --git a/VERSION b/VERSION
new file mode 100644
index 0000000..3b04cfb
--- /dev/null
+++ b/VERSION
@@ -0,0 +1 @@
+0.2
diff --git a/debian/changelog b/debian/changelog
new file mode 100644
index 0000000..02b2933
--- /dev/null
+++ b/debian/changelog
@@ -0,0 +1,11 @@
+salt-formula-iptables (0.2) trusty; urgency=medium
+
+  * First public release
+
+ -- Filip Pytloun <filip.pytloun@tcpcloud.eu>  Tue, 06 Oct 2015 16:38:43 +0200
+
+salt-formula-iptables (0.1) trusty; urgency=medium
+
+  * Initial release
+
+ -- Jan Kaufman <jan.kaufman@tcpcloud.eu>  Thu, 13 Aug 2015 23:23:41 +0200
diff --git a/debian/compat b/debian/compat
new file mode 100644
index 0000000..ec63514
--- /dev/null
+++ b/debian/compat
@@ -0,0 +1 @@
+9
diff --git a/debian/control b/debian/control
new file mode 100644
index 0000000..6c61c33
--- /dev/null
+++ b/debian/control
@@ -0,0 +1,15 @@
+Source: salt-formula-iptables
+Maintainer: Jan Kaufman <jan.kaufman@tcpcloud.eu>
+Section: admin
+Priority: optional
+Build-Depends: debhelper (>= 9)
+Standards-Version: 3.9.6
+Homepage: http://www.tcpcloud.eu
+Vcs-Browser: https://github.com/tcpcloud/salt-formula-iptables
+Vcs-Git: https://github.com/tcpcloud/salt-formula-iptables.git
+
+Package: salt-formula-iptables
+Architecture: all
+Depends: ${misc:Depends}, salt-master, reclass
+Description: iptables salt formula
+ Configure iptables rules.
diff --git a/debian/copyright b/debian/copyright
new file mode 100644
index 0000000..8f82be0
--- /dev/null
+++ b/debian/copyright
@@ -0,0 +1,15 @@
+Format: http://www.debian.org/doc/packaging-manuals/copyright-format/1.0/
+Upstream-Name: salt-formula-iptables
+Upstream-Contact: Ales Komarek <ales.komarek@tcpcloud.eu>
+Source: https://github.com/tcpcloud/salt-formula-iptables
+
+Files: *
+Copyright: 2014-2015 tcp cloud a.s.
+License: Apache-2.0
+  Copyright (C) 2014-2015 tcp cloud a.s.
+  .
+  Licensed under the Apache License, Version 2.0 (the "License");
+  you may not use this file except in compliance with the License.
+  .
+  On a Debian system you can find a copy of this license in
+  /usr/share/common-licenses/Apache-2.0.
diff --git a/debian/docs b/debian/docs
new file mode 100644
index 0000000..d585829
--- /dev/null
+++ b/debian/docs
@@ -0,0 +1,3 @@
+README.rst
+CHANGELOG.rst
+VERSION
diff --git a/debian/install b/debian/install
new file mode 100644
index 0000000..313b79a
--- /dev/null
+++ b/debian/install
@@ -0,0 +1,2 @@
+iptables/*             /usr/share/salt-formulas/env/iptables/
+metadata/service/*      /usr/share/salt-formulas/reclass/service/iptables/
diff --git a/debian/rules b/debian/rules
new file mode 100755
index 0000000..abde6ef
--- /dev/null
+++ b/debian/rules
@@ -0,0 +1,5 @@
+#!/usr/bin/make -f
+
+%:
+	dh $@
+
diff --git a/debian/source/format b/debian/source/format
new file mode 100644
index 0000000..89ae9db
--- /dev/null
+++ b/debian/source/format
@@ -0,0 +1 @@
+3.0 (native)
diff --git a/iptables/init.sls b/iptables/init.sls
new file mode 100644
index 0000000..43a97fc
--- /dev/null
+++ b/iptables/init.sls
@@ -0,0 +1,4 @@
+include:
+{%- if pillar.iptables.service is defined %}
+- iptables.service
+{%- endif %}
\ No newline at end of file
diff --git a/iptables/map.jinja b/iptables/map.jinja
new file mode 100644
index 0000000..9e9c115
--- /dev/null
+++ b/iptables/map.jinja
@@ -0,0 +1,11 @@
+
+{% set service = salt['grains.filter_by']({
+    'Debian': {
+        'pkgs': ['iptables','iptables-persistent' ],
+        'service': 'iptables-persistent',
+    },
+    'RedHat': {
+        'pkgs': ['iptables'],
+        'service': 'iptables',
+    },
+}, merge=salt['pillar.get']('iptables:service')) %}
diff --git a/iptables/service.sls b/iptables/service.sls
new file mode 100644
index 0000000..f126bd2
--- /dev/null
+++ b/iptables/service.sls
@@ -0,0 +1,77 @@
+{% from "iptables/map.jinja" import service with context %}
+
+{%- if pillar.iptables.service.enabled %}
+
+iptables_packages:
+  pkg.installed:
+  - names: {{ service.pkgs }}
+
+iptables_services:
+  service.dead:
+  - enable: true
+  - name: {{ service.service }}
+  - sig: test -e /etc/iptables/rules.v4
+  - require:
+    - pkg: iptables_packages
+
+{%- for chain_name, chain in service.get('chain', {}).iteritems() %}
+ 
+{%- for rule_name, rule in chain.get('rule', {}).iteritems() %}
+
+iptables_{{ chain_name }}_{{ rule_name }}:
+  iptables.insert:
+  {%- if rule.position is defined %}
+  - position: {{ rule.position }}
+  {%- endif %}
+  {%- if rule.table is defined %}
+  - table: {{ rule.table }}
+  {%- endif %}
+  - chain: {{ chain_name }}
+  {%- if rule.jump is defined %}
+  - jump: {{ rule.jump }}
+  {%- endif %}
+  {%- if rule.match is defined %}
+  - match: {{ rule.match }}
+  {%- endif %}
+  {%- if rule.connection_state is defined %}
+  - connstate: {{ rule.connection_state }}
+  {%- endif %}
+  {%- if rule.protocol is defined %}
+  - proto: {{ rule.protocol }}
+  {%- endif %}
+  {%- if rule.destination_port is defined %}
+  - dport: {{ rule.destination_port }}
+  {%- endif %}
+  {%- if rule.source_port is defined %}
+  - sport: {{ rule.source_port }}
+  {%- endif %}
+  {%- if rule.in_interface is defined %}
+  - in-interface: {{ rule.in_interface }}
+  {%- endif %}
+  {%- if rule.out_interface is defined %}
+  - out-interface: {{ rule.out_interface }}
+  {%- endif %}
+  {%- if rule.to_destination is defined %}
+  - to-destination: {{ rule.to_destination }}
+  {%- endif %}
+  {%-  if rule.source_network is defined %}
+  - source: {{ rule.source_network }}
+  {%- endif %}
+  {%-  if rule.destination_network is defined %}
+  - destination: {{ rule.destination_network }}
+  {%- endif %}
+
+  - save: True
+
+{%- endfor %}
+
+{%- endfor %}
+
+{%- else %}
+
+iptables_services:
+  service.dead:
+  - enable: false
+  - name: {{ service.service }}
+
+{%- endif %}
diff --git a/metadata/service/server/init.yml b/metadata/service/server/init.yml
new file mode 100644
index 0000000..09c3cb0
--- /dev/null
+++ b/metadata/service/server/init.yml
@@ -0,0 +1,2 @@
+applications:
+- iptables
\ No newline at end of file