diff --git a/horizon/files/httpd.conf b/horizon/files/httpd.conf
deleted file mode 100644
index 990a125..0000000
--- a/horizon/files/httpd.conf
+++ /dev/null
@@ -1,1009 +0,0 @@
-#
-# This is the main Apache server configuration file.  It contains the
-# configuration directives that give the server its instructions.
-# See <URL:http://httpd.apache.org/docs/2.2/> for detailed information.
-# In particular, see
-# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
-# for a discussion of each configuration directive.
-#
-#
-# Do NOT simply read the instructions in here without understanding
-# what they do.  They're here only as hints or reminders.  If you are unsure
-# consult the online docs. You have been warned.  
-#
-# The configuration directives are grouped into three basic sections:
-#  1. Directives that control the operation of the Apache server process as a
-#     whole (the 'global environment').
-#  2. Directives that define the parameters of the 'main' or 'default' server,
-#     which responds to requests that aren't handled by a virtual host.
-#     These directives also provide default values for the settings
-#     of all virtual hosts.
-#  3. Settings for virtual hosts, which allow Web requests to be sent to
-#     different IP addresses or hostnames and have them handled by the
-#     same Apache server process.
-#
-# Configuration and logfile names: If the filenames you specify for many
-# of the server's control files begin with "/" (or "drive:/" for Win32), the
-# server will use that explicit path.  If the filenames do *not* begin
-# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
-# with ServerRoot set to "/etc/httpd" will be interpreted by the
-# server as "/etc/httpd/logs/foo.log".
-#
-
-### Section 1: Global Environment
-#
-# The directives in this section affect the overall operation of Apache,
-# such as the number of concurrent requests it can handle or where it
-# can find its configuration files.
-#
-
-#
-# Don't give away too much information about all the subcomponents
-# we are running.  Comment out this line if you don't mind remote sites
-# finding out what major optional modules you are running
-ServerTokens OS
-
-#
-# ServerRoot: The top of the directory tree under which the server's
-# configuration, error, and log files are kept.
-#
-# NOTE!  If you intend to place this on an NFS (or otherwise network)
-# mounted filesystem then please read the LockFile documentation
-# (available at <URL:http://httpd.apache.org/docs/2.2/mod/mpm_common.html#lockfile>);
-# you will save yourself a lot of trouble.
-#
-# Do NOT add a slash at the end of the directory path.
-#
-ServerRoot "/etc/httpd"
-
-#
-# PidFile: The file in which the server should record its process
-# identification number when it starts.  Note the PIDFILE variable in
-# /etc/sysconfig/httpd must be set appropriately if this location is
-# changed.
-#
-PidFile run/httpd.pid
-
-#
-# Timeout: The number of seconds before receives and sends time out.
-#
-Timeout 60
-
-#
-# KeepAlive: Whether or not to allow persistent connections (more than
-# one request per connection). Set to "Off" to deactivate.
-#
-KeepAlive Off
-
-#
-# MaxKeepAliveRequests: The maximum number of requests to allow
-# during a persistent connection. Set to 0 to allow an unlimited amount.
-# We recommend you leave this number high, for maximum performance.
-#
-MaxKeepAliveRequests 100
-
-#
-# KeepAliveTimeout: Number of seconds to wait for the next request from the
-# same client on the same connection.
-#
-KeepAliveTimeout 15
-
-##
-## Server-Pool Size Regulation (MPM specific)
-## 
-
-# prefork MPM
-# StartServers: number of server processes to start
-# MinSpareServers: minimum number of server processes which are kept spare
-# MaxSpareServers: maximum number of server processes which are kept spare
-# ServerLimit: maximum value for MaxClients for the lifetime of the server
-# MaxClients: maximum number of server processes allowed to start
-# MaxRequestsPerChild: maximum number of requests a server process serves
-<IfModule prefork.c>
-StartServers       8
-MinSpareServers    5
-MaxSpareServers   20
-ServerLimit      256
-MaxClients       256
-MaxRequestsPerChild  4000
-</IfModule>
-
-# worker MPM
-# StartServers: initial number of server processes to start
-# MaxClients: maximum number of simultaneous client connections
-# MinSpareThreads: minimum number of worker threads which are kept spare
-# MaxSpareThreads: maximum number of worker threads which are kept spare
-# ThreadsPerChild: constant number of worker threads in each server process
-# MaxRequestsPerChild: maximum number of requests a server process serves
-<IfModule worker.c>
-StartServers         4
-MaxClients         300
-MinSpareThreads     25
-MaxSpareThreads     75 
-ThreadsPerChild     25
-MaxRequestsPerChild  0
-</IfModule>
-
-#
-# Listen: Allows you to bind Apache to specific IP addresses and/or
-# ports, in addition to the default. See also the <VirtualHost>
-# directive.
-#
-# Change this to Listen on specific IP addresses as shown below to 
-# prevent Apache from glomming onto all bound IP addresses (0.0.0.0)
-#
-#Listen 12.34.56.78:80
-Listen {{ pillar.horizon.server.bind.address }}:{{ pillar.horizon.server.bind.port }}
-
-#
-# Dynamic Shared Object (DSO) Support
-#
-# To be able to use the functionality of a module which was built as a DSO you
-# have to place corresponding `LoadModule' lines at this location so the
-# directives contained in it are actually available _before_ they are used.
-# Statically compiled modules (those listed by `httpd -l') do not need
-# to be loaded here.
-#
-# Example:
-# LoadModule foo_module modules/mod_foo.so
-#
-LoadModule auth_basic_module modules/mod_auth_basic.so
-LoadModule auth_digest_module modules/mod_auth_digest.so
-LoadModule authn_file_module modules/mod_authn_file.so
-LoadModule authn_alias_module modules/mod_authn_alias.so
-LoadModule authn_anon_module modules/mod_authn_anon.so
-LoadModule authn_dbm_module modules/mod_authn_dbm.so
-LoadModule authn_default_module modules/mod_authn_default.so
-LoadModule authz_host_module modules/mod_authz_host.so
-LoadModule authz_user_module modules/mod_authz_user.so
-LoadModule authz_owner_module modules/mod_authz_owner.so
-LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
-LoadModule authz_dbm_module modules/mod_authz_dbm.so
-LoadModule authz_default_module modules/mod_authz_default.so
-LoadModule ldap_module modules/mod_ldap.so
-LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
-LoadModule include_module modules/mod_include.so
-LoadModule log_config_module modules/mod_log_config.so
-LoadModule logio_module modules/mod_logio.so
-LoadModule env_module modules/mod_env.so
-LoadModule ext_filter_module modules/mod_ext_filter.so
-LoadModule mime_magic_module modules/mod_mime_magic.so
-LoadModule expires_module modules/mod_expires.so
-LoadModule deflate_module modules/mod_deflate.so
-LoadModule headers_module modules/mod_headers.so
-LoadModule usertrack_module modules/mod_usertrack.so
-LoadModule setenvif_module modules/mod_setenvif.so
-LoadModule mime_module modules/mod_mime.so
-LoadModule dav_module modules/mod_dav.so
-LoadModule status_module modules/mod_status.so
-LoadModule autoindex_module modules/mod_autoindex.so
-LoadModule info_module modules/mod_info.so
-LoadModule dav_fs_module modules/mod_dav_fs.so
-LoadModule vhost_alias_module modules/mod_vhost_alias.so
-LoadModule negotiation_module modules/mod_negotiation.so
-LoadModule dir_module modules/mod_dir.so
-LoadModule actions_module modules/mod_actions.so
-LoadModule speling_module modules/mod_speling.so
-LoadModule userdir_module modules/mod_userdir.so
-LoadModule alias_module modules/mod_alias.so
-LoadModule substitute_module modules/mod_substitute.so
-LoadModule rewrite_module modules/mod_rewrite.so
-LoadModule proxy_module modules/mod_proxy.so
-LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
-LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
-LoadModule proxy_http_module modules/mod_proxy_http.so
-LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
-LoadModule proxy_connect_module modules/mod_proxy_connect.so
-LoadModule cache_module modules/mod_cache.so
-LoadModule suexec_module modules/mod_suexec.so
-LoadModule disk_cache_module modules/mod_disk_cache.so
-LoadModule cgi_module modules/mod_cgi.so
-LoadModule version_module modules/mod_version.so
-
-#
-# The following modules are not loaded by default:
-#
-#LoadModule asis_module modules/mod_asis.so
-#LoadModule authn_dbd_module modules/mod_authn_dbd.so
-#LoadModule cern_meta_module modules/mod_cern_meta.so
-#LoadModule cgid_module modules/mod_cgid.so
-#LoadModule dbd_module modules/mod_dbd.so
-#LoadModule dumpio_module modules/mod_dumpio.so
-#LoadModule filter_module modules/mod_filter.so
-#LoadModule ident_module modules/mod_ident.so
-#LoadModule log_forensic_module modules/mod_log_forensic.so
-#LoadModule unique_id_module modules/mod_unique_id.so
-#
-
-#
-# Load config files from the config directory "/etc/httpd/conf.d".
-#
-Include conf.d/*.conf
-
-#
-# ExtendedStatus controls whether Apache will generate "full" status
-# information (ExtendedStatus On) or just basic information (ExtendedStatus
-# Off) when the "server-status" handler is called. The default is Off.
-#
-#ExtendedStatus On
-
-#
-# If you wish httpd to run as a different user or group, you must run
-# httpd as root initially and it will switch.  
-#
-# User/Group: The name (or #number) of the user/group to run httpd as.
-#  . On SCO (ODT 3) use "User nouser" and "Group nogroup".
-#  . On HPUX you may not be able to use shared memory as nobody, and the
-#    suggested workaround is to create a user www and use that user.
-#  NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)
-#  when the value of (unsigned)Group is above 60000; 
-#  don't use Group #-1 on these systems!
-#
-User apache
-Group apache
-
-### Section 2: 'Main' server configuration
-#
-# The directives in this section set up the values used by the 'main'
-# server, which responds to any requests that aren't handled by a
-# <VirtualHost> definition.  These values also provide defaults for
-# any <VirtualHost> containers you may define later in the file.
-#
-# All of these directives may appear inside <VirtualHost> containers,
-# in which case these default settings will be overridden for the
-# virtual host being defined.
-#
-
-#
-# ServerAdmin: Your address, where problems with the server should be
-# e-mailed.  This address appears on some server-generated pages, such
-# as error documents.  e.g. admin@your-domain.com
-#
-ServerAdmin root@localhost
-
-#
-# ServerName gives the name and port that the server uses to identify itself.
-# This can often be determined automatically, but we recommend you specify
-# it explicitly to prevent problems during startup.
-#
-# If this is not set to valid DNS name for your host, server-generated
-# redirections will not work.  See also the UseCanonicalName directive.
-#
-# If your host doesn't have a registered DNS name, enter its IP address here.
-# You will have to access it by its address anyway, and this will make 
-# redirections work in a sensible way.
-#
-#ServerName www.example.com:80
-
-#
-# UseCanonicalName: Determines how Apache constructs self-referencing 
-# URLs and the SERVER_NAME and SERVER_PORT variables.
-# When set "Off", Apache will use the Hostname and Port supplied
-# by the client.  When set "On", Apache will use the value of the
-# ServerName directive.
-#
-UseCanonicalName Off
-
-#
-# DocumentRoot: The directory out of which you will serve your
-# documents. By default, all requests are taken from this directory, but
-# symbolic links and aliases may be used to point to other locations.
-#
-DocumentRoot "/var/www/html"
-
-#
-# Each directory to which Apache has access can be configured with respect
-# to which services and features are allowed and/or disabled in that
-# directory (and its subdirectories). 
-#
-# First, we configure the "default" to be a very restrictive set of 
-# features.  
-#
-<Directory />
-    Options FollowSymLinks
-    AllowOverride None
-</Directory>
-
-#
-# Note that from this point forward you must specifically allow
-# particular features to be enabled - so if something's not working as
-# you might expect, make sure that you have specifically enabled it
-# below.
-#
-
-#
-# This should be changed to whatever you set DocumentRoot to.
-#
-<Directory "/var/www/html">
-
-#
-# Possible values for the Options directive are "None", "All",
-# or any combination of:
-#   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
-#
-# Note that "MultiViews" must be named *explicitly* --- "Options All"
-# doesn't give it to you.
-#
-# The Options directive is both complicated and important.  Please see
-# http://httpd.apache.org/docs/2.2/mod/core.html#options
-# for more information.
-#
-    Options Indexes FollowSymLinks
-
-#
-# AllowOverride controls what directives may be placed in .htaccess files.
-# It can be "All", "None", or any combination of the keywords:
-#   Options FileInfo AuthConfig Limit
-#
-    AllowOverride None
-
-#
-# Controls who can get stuff from this server.
-#
-    Order allow,deny
-    Allow from all
-
-</Directory>
-
-#
-# UserDir: The name of the directory that is appended onto a user's home
-# directory if a ~user request is received.
-#
-# The path to the end user account 'public_html' directory must be
-# accessible to the webserver userid.  This usually means that ~userid
-# must have permissions of 711, ~userid/public_html must have permissions
-# of 755, and documents contained therein must be world-readable.
-# Otherwise, the client will only receive a "403 Forbidden" message.
-#
-# See also: http://httpd.apache.org/docs/misc/FAQ.html#forbidden
-#
-<IfModule mod_userdir.c>
-    #
-    # UserDir is disabled by default since it can confirm the presence
-    # of a username on the system (depending on home directory
-    # permissions).
-    #
-    UserDir disabled
-
-    #
-    # To enable requests to /~user/ to serve the user's public_html
-    # directory, remove the "UserDir disabled" line above, and uncomment
-    # the following line instead:
-    # 
-    #UserDir public_html
-
-</IfModule>
-
-#
-# Control access to UserDir directories.  The following is an example
-# for a site where these directories are restricted to read-only.
-#
-#<Directory /home/*/public_html>
-#    AllowOverride FileInfo AuthConfig Limit
-#    Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
-#    <Limit GET POST OPTIONS>
-#        Order allow,deny
-#        Allow from all
-#    </Limit>
-#    <LimitExcept GET POST OPTIONS>
-#        Order deny,allow
-#        Deny from all
-#    </LimitExcept>
-#</Directory>
-
-#
-# DirectoryIndex: sets the file that Apache will serve if a directory
-# is requested.
-#
-# The index.html.var file (a type-map) is used to deliver content-
-# negotiated documents.  The MultiViews Option can be used for the 
-# same purpose, but it is much slower.
-#
-DirectoryIndex index.html index.html.var
-
-#
-# AccessFileName: The name of the file to look for in each directory
-# for additional configuration directives.  See also the AllowOverride
-# directive.
-#
-AccessFileName .htaccess
-
-#
-# The following lines prevent .htaccess and .htpasswd files from being 
-# viewed by Web clients. 
-#
-<Files ~ "^\.ht">
-    Order allow,deny
-    Deny from all
-    Satisfy All
-</Files>
-
-#
-# TypesConfig describes where the mime.types file (or equivalent) is
-# to be found.
-#
-TypesConfig /etc/mime.types
-
-#
-# DefaultType is the default MIME type the server will use for a document
-# if it cannot otherwise determine one, such as from filename extensions.
-# If your server contains mostly text or HTML documents, "text/plain" is
-# a good value.  If most of your content is binary, such as applications
-# or images, you may want to use "application/octet-stream" instead to
-# keep browsers from trying to display binary files as though they are
-# text.
-#
-DefaultType text/plain
-
-#
-# The mod_mime_magic module allows the server to use various hints from the
-# contents of the file itself to determine its type.  The MIMEMagicFile
-# directive tells the module where the hint definitions are located.
-#
-<IfModule mod_mime_magic.c>
-#   MIMEMagicFile /usr/share/magic.mime
-    MIMEMagicFile conf/magic
-</IfModule>
-
-#
-# HostnameLookups: Log the names of clients or just their IP addresses
-# e.g., www.apache.org (on) or 204.62.129.132 (off).
-# The default is off because it'd be overall better for the net if people
-# had to knowingly turn this feature on, since enabling it means that
-# each client request will result in AT LEAST one lookup request to the
-# nameserver.
-#
-HostnameLookups Off
-
-#
-# EnableMMAP: Control whether memory-mapping is used to deliver
-# files (assuming that the underlying OS supports it).
-# The default is on; turn this off if you serve from NFS-mounted 
-# filesystems.  On some systems, turning it off (regardless of
-# filesystem) can improve performance; for details, please see
-# http://httpd.apache.org/docs/2.2/mod/core.html#enablemmap
-#
-#EnableMMAP off
-
-#
-# EnableSendfile: Control whether the sendfile kernel support is 
-# used to deliver files (assuming that the OS supports it). 
-# The default is on; turn this off if you serve from NFS-mounted 
-# filesystems.  Please see
-# http://httpd.apache.org/docs/2.2/mod/core.html#enablesendfile
-#
-#EnableSendfile off
-
-#
-# ErrorLog: The location of the error log file.
-# If you do not specify an ErrorLog directive within a <VirtualHost>
-# container, error messages relating to that virtual host will be
-# logged here.  If you *do* define an error logfile for a <VirtualHost>
-# container, that host's errors will be logged there and not here.
-#
-ErrorLog logs/error_log
-
-#
-# LogLevel: Control the number of messages logged to the error_log.
-# Possible values include: debug, info, notice, warn, error, crit,
-# alert, emerg.
-#
-LogLevel warn
-
-#
-# The following directives define some format nicknames for use with
-# a CustomLog directive (see below).
-#
-LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
-LogFormat "%h %l %u %t \"%r\" %>s %b" common
-LogFormat "%{Referer}i -> %U" referer
-LogFormat "%{User-agent}i" agent
-
-# "combinedio" includes actual counts of actual bytes received (%I) and sent (%O); this
-# requires the mod_logio module to be loaded.
-#LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
-
-#
-# The location and format of the access logfile (Common Logfile Format).
-# If you do not define any access logfiles within a <VirtualHost>
-# container, they will be logged here.  Contrariwise, if you *do*
-# define per-<VirtualHost> access logfiles, transactions will be
-# logged therein and *not* in this file.
-#
-#CustomLog logs/access_log common
-
-#
-# If you would like to have separate agent and referer logfiles, uncomment
-# the following directives.
-#
-#CustomLog logs/referer_log referer
-#CustomLog logs/agent_log agent
-
-#
-# For a single logfile with access, agent, and referer information
-# (Combined Logfile Format), use the following directive:
-#
-CustomLog logs/access_log combined
-
-#
-# Optionally add a line containing the server version and virtual host
-# name to server-generated pages (internal error documents, FTP directory
-# listings, mod_status and mod_info output etc., but not CGI generated
-# documents or custom error documents).
-# Set to "EMail" to also include a mailto: link to the ServerAdmin.
-# Set to one of:  On | Off | EMail
-#
-ServerSignature On
-
-#
-# Aliases: Add here as many aliases as you need (with no limit). The format is 
-# Alias fakename realname
-#
-# Note that if you include a trailing / on fakename then the server will
-# require it to be present in the URL.  So "/icons" isn't aliased in this
-# example, only "/icons/".  If the fakename is slash-terminated, then the 
-# realname must also be slash terminated, and if the fakename omits the 
-# trailing slash, the realname must also omit it.
-#
-# We include the /icons/ alias for FancyIndexed directory listings.  If you
-# do not use FancyIndexing, you may comment this out.
-#
-Alias /icons/ "/var/www/icons/"
-
-<Directory "/var/www/icons">
-    Options Indexes MultiViews FollowSymLinks
-    AllowOverride None
-    Order allow,deny
-    Allow from all
-</Directory>
-
-#
-# WebDAV module configuration section.
-# 
-<IfModule mod_dav_fs.c>
-    # Location of the WebDAV lock database.
-    DAVLockDB /var/lib/dav/lockdb
-</IfModule>
-
-#
-# ScriptAlias: This controls which directories contain server scripts.
-# ScriptAliases are essentially the same as Aliases, except that
-# documents in the realname directory are treated as applications and
-# run by the server when requested rather than as documents sent to the client.
-# The same rules about trailing "/" apply to ScriptAlias directives as to
-# Alias.
-#
-ScriptAlias /cgi-bin/ "/var/www/cgi-bin/"
-
-#
-# "/var/www/cgi-bin" should be changed to whatever your ScriptAliased
-# CGI directory exists, if you have that configured.
-#
-<Directory "/var/www/cgi-bin">
-    AllowOverride None
-    Options None
-    Order allow,deny
-    Allow from all
-</Directory>
-
-#
-# Redirect allows you to tell clients about documents which used to exist in
-# your server's namespace, but do not anymore. This allows you to tell the
-# clients where to look for the relocated document.
-# Example:
-# Redirect permanent /foo http://www.example.com/bar
-
-#
-# Directives controlling the display of server-generated directory listings.
-#
-
-#
-# IndexOptions: Controls the appearance of server-generated directory
-# listings.
-#
-IndexOptions FancyIndexing VersionSort NameWidth=* HTMLTable Charset=UTF-8
-
-#
-# AddIcon* directives tell the server which icon to show for different
-# files or filename extensions.  These are only displayed for
-# FancyIndexed directories.
-#
-AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
-
-AddIconByType (TXT,/icons/text.gif) text/*
-AddIconByType (IMG,/icons/image2.gif) image/*
-AddIconByType (SND,/icons/sound2.gif) audio/*
-AddIconByType (VID,/icons/movie.gif) video/*
-
-AddIcon /icons/binary.gif .bin .exe
-AddIcon /icons/binhex.gif .hqx
-AddIcon /icons/tar.gif .tar
-AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
-AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
-AddIcon /icons/a.gif .ps .ai .eps
-AddIcon /icons/layout.gif .html .shtml .htm .pdf
-AddIcon /icons/text.gif .txt
-AddIcon /icons/c.gif .c
-AddIcon /icons/p.gif .pl .py
-AddIcon /icons/f.gif .for
-AddIcon /icons/dvi.gif .dvi
-AddIcon /icons/uuencoded.gif .uu
-AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
-AddIcon /icons/tex.gif .tex
-AddIcon /icons/bomb.gif core
-
-AddIcon /icons/back.gif ..
-AddIcon /icons/hand.right.gif README
-AddIcon /icons/folder.gif ^^DIRECTORY^^
-AddIcon /icons/blank.gif ^^BLANKICON^^
-
-#
-# DefaultIcon is which icon to show for files which do not have an icon
-# explicitly set.
-#
-DefaultIcon /icons/unknown.gif
-
-#
-# AddDescription allows you to place a short description after a file in
-# server-generated indexes.  These are only displayed for FancyIndexed
-# directories.
-# Format: AddDescription "description" filename
-#
-#AddDescription "GZIP compressed document" .gz
-#AddDescription "tar archive" .tar
-#AddDescription "GZIP compressed tar archive" .tgz
-
-#
-# ReadmeName is the name of the README file the server will look for by
-# default, and append to directory listings.
-#
-# HeaderName is the name of a file which should be prepended to
-# directory indexes. 
-ReadmeName README.html
-HeaderName HEADER.html
-
-#
-# IndexIgnore is a set of filenames which directory indexing should ignore
-# and not include in the listing.  Shell-style wildcarding is permitted.
-#
-IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
-
-#
-# DefaultLanguage and AddLanguage allows you to specify the language of 
-# a document. You can then use content negotiation to give a browser a 
-# file in a language the user can understand.
-#
-# Specify a default language. This means that all data
-# going out without a specific language tag (see below) will 
-# be marked with this one. You probably do NOT want to set
-# this unless you are sure it is correct for all cases.
-#
-# * It is generally better to not mark a page as 
-# * being a certain language than marking it with the wrong
-# * language!
-#
-# DefaultLanguage nl
-#
-# Note 1: The suffix does not have to be the same as the language
-# keyword --- those with documents in Polish (whose net-standard
-# language code is pl) may wish to use "AddLanguage pl .po" to
-# avoid the ambiguity with the common suffix for perl scripts.
-#
-# Note 2: The example entries below illustrate that in some cases 
-# the two character 'Language' abbreviation is not identical to 
-# the two character 'Country' code for its country,
-# E.g. 'Danmark/dk' versus 'Danish/da'.
-#
-# Note 3: In the case of 'ltz' we violate the RFC by using a three char
-# specifier. There is 'work in progress' to fix this and get
-# the reference data for rfc1766 cleaned up.
-#
-# Catalan (ca) - Croatian (hr) - Czech (cs) - Danish (da) - Dutch (nl)
-# English (en) - Esperanto (eo) - Estonian (et) - French (fr) - German (de)
-# Greek-Modern (el) - Hebrew (he) - Italian (it) - Japanese (ja)
-# Korean (ko) - Luxembourgeois* (ltz) - Norwegian Nynorsk (nn)
-# Norwegian (no) - Polish (pl) - Portugese (pt)
-# Brazilian Portuguese (pt-BR) - Russian (ru) - Swedish (sv)
-# Simplified Chinese (zh-CN) - Spanish (es) - Traditional Chinese (zh-TW)
-#
-AddLanguage ca .ca
-AddLanguage cs .cz .cs
-AddLanguage da .dk
-AddLanguage de .de
-AddLanguage el .el
-AddLanguage en .en
-AddLanguage eo .eo
-AddLanguage es .es
-AddLanguage et .et
-AddLanguage fr .fr
-AddLanguage he .he
-AddLanguage hr .hr
-AddLanguage it .it
-AddLanguage ja .ja
-AddLanguage ko .ko
-AddLanguage ltz .ltz
-AddLanguage nl .nl
-AddLanguage nn .nn
-AddLanguage no .no
-AddLanguage pl .po
-AddLanguage pt .pt
-AddLanguage pt-BR .pt-br
-AddLanguage ru .ru
-AddLanguage sv .sv
-AddLanguage zh-CN .zh-cn
-AddLanguage zh-TW .zh-tw
-
-#
-# LanguagePriority allows you to give precedence to some languages
-# in case of a tie during content negotiation.
-#
-# Just list the languages in decreasing order of preference. We have
-# more or less alphabetized them here. You probably want to change this.
-#
-LanguagePriority en ca cs da de el eo es et fr he hr it ja ko ltz nl nn no pl pt pt-BR ru sv zh-CN zh-TW
-
-#
-# ForceLanguagePriority allows you to serve a result page rather than
-# MULTIPLE CHOICES (Prefer) [in case of a tie] or NOT ACCEPTABLE (Fallback)
-# [in case no accepted languages matched the available variants]
-#
-ForceLanguagePriority Prefer Fallback
-
-#
-# Specify a default charset for all content served; this enables
-# interpretation of all content as UTF-8 by default.  To use the 
-# default browser choice (ISO-8859-1), or to allow the META tags
-# in HTML content to override this choice, comment out this
-# directive:
-#
-AddDefaultCharset UTF-8
-
-#
-# AddType allows you to add to or override the MIME configuration
-# file mime.types for specific file types.
-#
-#AddType application/x-tar .tgz
-
-#
-# AddEncoding allows you to have certain browsers uncompress
-# information on the fly. Note: Not all browsers support this.
-# Despite the name similarity, the following Add* directives have nothing
-# to do with the FancyIndexing customization directives above.
-#
-#AddEncoding x-compress .Z
-#AddEncoding x-gzip .gz .tgz
-
-# If the AddEncoding directives above are commented-out, then you
-# probably should define those extensions to indicate media types:
-#
-AddType application/x-compress .Z
-AddType application/x-gzip .gz .tgz
-
-#
-#   MIME-types for downloading Certificates and CRLs
-#
-AddType application/x-x509-ca-cert .crt
-AddType application/x-pkcs7-crl    .crl
-
-#
-# AddHandler allows you to map certain file extensions to "handlers":
-# actions unrelated to filetype. These can be either built into the server
-# or added with the Action directive (see below)
-#
-# To use CGI scripts outside of ScriptAliased directories:
-# (You will also need to add "ExecCGI" to the "Options" directive.)
-#
-#AddHandler cgi-script .cgi
-
-#
-# For files that include their own HTTP headers:
-#
-#AddHandler send-as-is asis
-
-#
-# For type maps (negotiated resources):
-# (This is enabled by default to allow the Apache "It Worked" page
-#  to be distributed in multiple languages.)
-#
-AddHandler type-map var
-
-#
-# Filters allow you to process content before it is sent to the client.
-#
-# To parse .shtml files for server-side includes (SSI):
-# (You will also need to add "Includes" to the "Options" directive.)
-#
-AddType text/html .shtml
-AddOutputFilter INCLUDES .shtml
-
-#
-# Action lets you define media types that will execute a script whenever
-# a matching file is called. This eliminates the need for repeated URL
-# pathnames for oft-used CGI file processors.
-# Format: Action media/type /cgi-script/location
-# Format: Action handler-name /cgi-script/location
-#
-
-#
-# Customizable error responses come in three flavors:
-# 1) plain text 2) local redirects 3) external redirects
-#
-# Some examples:
-#ErrorDocument 500 "The server made a boo boo."
-#ErrorDocument 404 /missing.html
-#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
-#ErrorDocument 402 http://www.example.com/subscription_info.html
-#
-
-#
-# Putting this all together, we can internationalize error responses.
-#
-# We use Alias to redirect any /error/HTTP_<error>.html.var response to
-# our collection of by-error message multi-language collections.  We use 
-# includes to substitute the appropriate text.
-#
-# You can modify the messages' appearance without changing any of the
-# default HTTP_<error>.html.var files by adding the line:
-#
-#   Alias /error/include/ "/your/include/path/"
-#
-# which allows you to create your own set of files by starting with the
-# /var/www/error/include/ files and
-# copying them to /your/include/path/, even on a per-VirtualHost basis.
-#
-
-Alias /error/ "/var/www/error/"
-
-<IfModule mod_negotiation.c>
-<IfModule mod_include.c>
-    <Directory "/var/www/error">
-        AllowOverride None
-        Options IncludesNoExec
-        AddOutputFilter Includes html
-        AddHandler type-map var
-        Order allow,deny
-        Allow from all
-        LanguagePriority en es de fr
-        ForceLanguagePriority Prefer Fallback
-    </Directory>
-
-#    ErrorDocument 400 /error/HTTP_BAD_REQUEST.html.var
-#    ErrorDocument 401 /error/HTTP_UNAUTHORIZED.html.var
-#    ErrorDocument 403 /error/HTTP_FORBIDDEN.html.var
-#    ErrorDocument 404 /error/HTTP_NOT_FOUND.html.var
-#    ErrorDocument 405 /error/HTTP_METHOD_NOT_ALLOWED.html.var
-#    ErrorDocument 408 /error/HTTP_REQUEST_TIME_OUT.html.var
-#    ErrorDocument 410 /error/HTTP_GONE.html.var
-#    ErrorDocument 411 /error/HTTP_LENGTH_REQUIRED.html.var
-#    ErrorDocument 412 /error/HTTP_PRECONDITION_FAILED.html.var
-#    ErrorDocument 413 /error/HTTP_REQUEST_ENTITY_TOO_LARGE.html.var
-#    ErrorDocument 414 /error/HTTP_REQUEST_URI_TOO_LARGE.html.var
-#    ErrorDocument 415 /error/HTTP_UNSUPPORTED_MEDIA_TYPE.html.var
-#    ErrorDocument 500 /error/HTTP_INTERNAL_SERVER_ERROR.html.var
-#    ErrorDocument 501 /error/HTTP_NOT_IMPLEMENTED.html.var
-#    ErrorDocument 502 /error/HTTP_BAD_GATEWAY.html.var
-#    ErrorDocument 503 /error/HTTP_SERVICE_UNAVAILABLE.html.var
-#    ErrorDocument 506 /error/HTTP_VARIANT_ALSO_VARIES.html.var
-
-</IfModule>
-</IfModule>
-
-#
-# The following directives modify normal HTTP response behavior to
-# handle known problems with browser implementations.
-#
-BrowserMatch "Mozilla/2" nokeepalive
-BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
-BrowserMatch "RealPlayer 4\.0" force-response-1.0
-BrowserMatch "Java/1\.0" force-response-1.0
-BrowserMatch "JDK/1\.0" force-response-1.0
-
-#
-# The following directive disables redirects on non-GET requests for
-# a directory that does not include the trailing slash.  This fixes a 
-# problem with Microsoft WebFolders which does not appropriately handle 
-# redirects for folders with DAV methods.
-# Same deal with Apple's DAV filesystem and Gnome VFS support for DAV.
-#
-BrowserMatch "Microsoft Data Access Internet Publishing Provider" redirect-carefully
-BrowserMatch "MS FrontPage" redirect-carefully
-BrowserMatch "^WebDrive" redirect-carefully
-BrowserMatch "^WebDAVFS/1.[0123]" redirect-carefully
-BrowserMatch "^gnome-vfs/1.0" redirect-carefully
-BrowserMatch "^XML Spy" redirect-carefully
-BrowserMatch "^Dreamweaver-WebDAV-SCM1" redirect-carefully
-
-#
-# Allow server status reports generated by mod_status,
-# with the URL of http://servername/server-status
-# Change the ".example.com" to match your domain to enable.
-#
-#<Location /server-status>
-#    SetHandler server-status
-#    Order deny,allow
-#    Deny from all
-#    Allow from .example.com
-#</Location>
-
-#
-# Allow remote server configuration reports, with the URL of
-#  http://servername/server-info (requires that mod_info.c be loaded).
-# Change the ".example.com" to match your domain to enable.
-#
-#<Location /server-info>
-#    SetHandler server-info
-#    Order deny,allow
-#    Deny from all
-#    Allow from .example.com
-#</Location>
-
-#
-# Proxy Server directives. Uncomment the following lines to
-# enable the proxy server:
-#
-#<IfModule mod_proxy.c>
-#ProxyRequests On
-#
-#<Proxy *>
-#    Order deny,allow
-#    Deny from all
-#    Allow from .example.com
-#</Proxy>
-
-#
-# Enable/disable the handling of HTTP/1.1 "Via:" headers.
-# ("Full" adds the server version; "Block" removes all outgoing Via: headers)
-# Set to one of: Off | On | Full | Block
-#
-#ProxyVia On
-
-#
-# To enable a cache of proxied content, uncomment the following lines.
-# See http://httpd.apache.org/docs/2.2/mod/mod_cache.html for more details.
-#
-#<IfModule mod_disk_cache.c>
-#   CacheEnable disk /
-#   CacheRoot "/var/cache/mod_proxy"
-#</IfModule>
-#
-
-#</IfModule>
-# End of proxy directives.
-
-### Section 3: Virtual Hosts
-#
-# VirtualHost: If you want to maintain multiple domains/hostnames on your
-# machine you can setup VirtualHost containers for them. Most configurations
-# use only name-based virtual hosts so the server doesn't need to worry about
-# IP addresses. This is indicated by the asterisks in the directives below.
-#
-# Please see the documentation at 
-# <URL:http://httpd.apache.org/docs/2.2/vhosts/>
-# for further details before you try to setup virtual hosts.
-#
-# You may use the command line option '-S' to verify your virtual host
-# configuration.
-
-#
-# Use name-based virtual hosting.
-#
-#NameVirtualHost *:80
-#
-# NOTE: NameVirtualHost cannot be used without a port specifier 
-# (e.g. :80) if mod_ssl is being used, due to the nature of the
-# SSL protocol.
-#
-
-#
-# VirtualHost example:
-# Almost any Apache directive may go into a VirtualHost container.
-# The first VirtualHost section is used for requests without a known
-# server name.
-#
-#<VirtualHost *:80>
-#    ServerAdmin webmaster@dummy-host.example.com
-#    DocumentRoot /www/docs/dummy-host.example.com
-#    ServerName dummy-host.example.com
-#    ErrorLog logs/dummy-host.example.com-error_log
-#    CustomLog logs/dummy-host.example.com-access_log common
-#</VirtualHost>
diff --git a/horizon/files/openstack-dashboard.conf.Debian b/horizon/files/openstack-dashboard.conf.Debian
index 224dccb..c9ef51c 100644
--- a/horizon/files/openstack-dashboard.conf.Debian
+++ b/horizon/files/openstack-dashboard.conf.Debian
@@ -1,4 +1,5 @@
 {%- from "horizon/map.jinja" import server with context %}
+Listen {{ server.get('bind', {}).get('address', '0.0.0.0') }}:{{ server.get('bind', {}).get('port', 80) }}
 
 <VirtualHost {{ server.get('bind', {}).get('address', '0.0.0.0') }}:{{ server.get('bind', {}).get('port', 80) }}>
   ServerName {{ server.get('host', {}).get('name', 'openstack-dashboard') }}
diff --git a/horizon/files/ports.conf b/horizon/files/ports.conf
deleted file mode 100644
index 3b7254e..0000000
--- a/horizon/files/ports.conf
+++ /dev/null
@@ -1,16 +0,0 @@
-{%- from "horizon/map.jinja" import server with context %}
-# If you just change the port or add more ports here, you will likely also
-# have to change the VirtualHost statement in
-# /etc/apache2/sites-enabled/000-default.conf
-
-Listen {{ server.bind.address }}:{{ server.bind.port }}
-
-<IfModule ssl_module>
-        Listen {{ server.bind.address }}:443
-</IfModule>
-
-<IfModule mod_gnutls.c>
-        Listen {{ server.bind.address }}:443
-</IfModule>
-
-# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
diff --git a/horizon/map.jinja b/horizon/map.jinja
index 7fec03e..cf7c503 100644
--- a/horizon/map.jinja
+++ b/horizon/map.jinja
@@ -19,8 +19,6 @@
         'apache_log_format': '%h %t %m \\"%U%q\\" %H %>s %O %D \\"%{Referer}i\\" \\"%{User-Agent}i\\"',
         'certs_dir': '/etc/ssl/certs',
         'private_dir': '/etc/ssl/private',
-        'port_config_file': '/etc/apache2/ports.conf',
-        'port_config_template': 'salt://horizon/files/ports.conf',
         'cache': {'host': '127.0.0.1', 'port': 11211}
     },
     'RedHat': {
@@ -39,8 +37,6 @@
         'apache_log_format': '%h %t %m \\"%U%q\\" %H %>s %O %D \\"%{Referer}i\\" \\"%{User-Agent}i\\"',
         'certs_dir': '/etc/pki/tls/certs',
         'private_dir': '/etc/pki/tls/private',
-        'port_config_file': '/etc/httpd/conf/httpd.conf',
-        'port_config_template': 'salt://horizon/files/httpd.conf',
         'cache': {'host': '127.0.0.1', 'port': 11211}
     },
 }, merge=salt['pillar.get']('horizon:server')) %}
diff --git a/horizon/server/service.sls b/horizon/server/service.sls
index a52a550..d0d76c8 100644
--- a/horizon/server/service.sls
+++ b/horizon/server/service.sls
@@ -58,17 +58,6 @@
 
 {%- endfor %}
 
-horizon_apache_port_config:
-  file.managed:
-  - name: {{ server.port_config_file }}
-  - source: {{ server.port_config_template }}
-  - template: jinja
-  - mode: 644
-  - user: root
-  - group: root
-  - require:
-    - pkg: horizon_packages
-
 horizon_apache_config:
   file.managed:
   - name: {{ server.apache_config }}
@@ -101,7 +90,6 @@
     - file: horizon_config
     - file: horizon_apache_config
     - file: horizon_log_file
-    - file: horizon_apache_port_config
 
 horizon_log_dir:
   file.directory: