diff --git a/doc/source/README.rst b/doc/source/README.rst
new file mode 120000
index 0000000..c768ff7
--- /dev/null
+++ b/doc/source/README.rst
@@ -0,0 +1 @@
+../../README.rst
\ No newline at end of file
diff --git a/doc/source/conf.py b/doc/source/conf.py
index 326bd67..c611c72 100644
--- a/doc/source/conf.py
+++ b/doc/source/conf.py
@@ -36,7 +36,7 @@
 
 # General information about the project.
 project = u'salt-formula-helm'
-copyright = u'2016, Mirantis Inc.'
+copyright = u'2017, Mirantis Inc.'
 
 # If true, '()' will be appended to :func: etc. cross-reference text.
 add_function_parentheses = True
diff --git a/doc/source/guide.rst b/doc/source/guide.rst
new file mode 100644
index 0000000..a5d5de5
--- /dev/null
+++ b/doc/source/guide.rst
@@ -0,0 +1,205 @@
+==========
+User guide
+==========
+
+.. highlight:: yaml
+
+Instalation
+===========
+
+Our formula is already being installed from `system level <https://github.com/Mirantis/reclass-system-salt-model/blob/master/salt/master/pkg.yml>`_
+so if you have ``system.salt.master.pkg`` or ``system.salt.master.git`` class
+on your config node, you don't need to do anything.
+
+Using class from system level
+-----------------------------
+
+You can use ``system.salt.master.formula.pkg.helm`` `class <https://github.com/Mirantis/reclass-system-salt-model/blob/master/salt/master/formula/pkg/helm.yml>`_
+to install from packages or include following to some part of config node
+model::
+
+  parameters:
+    salt:
+      master:
+        environment:
+          prd:
+            formula:
+              helm:
+                source: pkg
+                name: salt-formula-helm
+
+If you want to isntall from Git repo, you can use ``system.salt.master.formula.git.helm`` `class <https://github.com/Mirantis/reclass-system-salt-model/blob/master/salt/master/formula/git/helm.yml>`_
+or following snippet::
+
+  parameters:
+    salt:
+      master:
+        environment:
+          prd:
+            formula:
+              helm:
+                source: git
+                address: '${_param:salt_master_environment_repository}/salt-formula-helm.git'
+                revision: ${_param:salt_master_environment_revision}
+                module:
+                  helm.py:
+                    enabled: true
+                state:
+                  helm_release.py:
+                    enabled: true
+
+Using apt
+---------
+
+You can also just install using ``apt`` from our repo at `<http://apt-mk.mirantis.com/>`_:
+
+.. code-block:: bash
+
+  apt install salt-formula-helm
+
+Basic usage
+===========
+
+The most simple way to use this formula is to include ``service.helm.client``
+class or one derived from it to one of your Kubernetes controllers. Following
+our cookiecutter model structure, if you create file at ``classes/cluster/<cluster name>/kubernetes/helm.yml``
+with following contents (we'll use this file throughout this guide)::
+
+  classes:
+  - service.helm.client
+
+and then add it to one of kubernetes controllers by adding to ``reclass:storage:node``
+section of ``classes/cluster/<cluster name>/infra/config.yml`` file::
+
+  kubernetes_control_node01:
+  - cluster.${_param:cluster_name}.kubernetes.helm
+
+And then run ``reclass`` state and ``refresh_pillar`` method:
+
+.. code-block:: bash
+
+  salt -I 'salt:master' state.sls reclass
+  salt '*' saltutil.refresh_pillar
+
+Now you can address this node via ``helm:client`` pillar value:
+
+.. code-block:: bash
+
+  salt -I 'helm:client' state.sls helm
+
+After you run this, the state will install ``helm`` binary on selected node and
+deploy Tiller on Kubernetes cluster.
+
+Release creation
+----------------
+
+To create some release, you should add its description to
+``helm:client:releases`` section of the model::
+
+  classes:
+  - service.helm.client
+  parameters:
+    helm:
+      client:
+        releases:
+          my-first-sql:  # This name is used by default as release name
+            name: the-mysql  # But can be overriden here
+            chart: stable/mysql  # This chart exists in default helm repo
+
+After this if you run ``helm`` state
+
+.. code-block:: bash
+
+  salt -I 'helm:client' state.sls helm
+
+``the-mysql`` release will be created in Tiller in ``default`` namespace.
+
+Using Mirantis chart repository
+-------------------------------
+
+To use charts from Mirantis chart repository you must describe it in model and
+use it in ``chart``::
+
+  helm:
+    client:
+      repos:
+        mirantisworkloads: https://mirantisworkloads.storage.googleapis.com/
+      releases:
+        zoo1:
+          name: my-zookeeper
+          chart: mirantisworkloads/zookeeper  # we reference installed repo
+
+This pillar will install latest version of Zookeeper chart from Mirantis
+repository.
+
+Release customizations
+----------------------
+
+You can change namespace where the release is created, version of chart to use
+and specify any values to pass to the chart::
+
+ releases:
+   zoo1:
+     chart: mirantisworkloads/zookeeper
+     namespace: different-ns  # Namespace will be created if absent
+     version: 1.2.0  # select any available version
+     values:
+       logLevel: INFO  # any values used by chart can specified here
+
+Note that after initial deployment, you can change these values (except
+namespace) if chart supports it.
+
+.. note::
+
+  In Kubernetes versions up to 1.6 statefulsets cannot be upgraded, so you
+  cannot change version of chart that creates statefulset, like our Zookeeper
+  chart.
+
+Release deletion
+----------------
+
+To ensure that release is absent, you should set its ``enable`` parameter to
+``false``::
+
+  releases:
+    zoo1:
+      name: my-zookeeper  # Note that releases are identified in Tiller by name
+                          # so you must leave custom name if you've specified
+                          # one.
+      enabled: false
+
+After this model is applied, ``my-zookeeper`` release will be deleted.
+
+Running on remote Kubernetes
+============================
+
+Up to this point we assumed that Helm formula is applied to controller node of
+existing Kubernetes cluster with already installed and configured ``kubectl``.
+If you want to use it with some remote Kubernetes or on any different node
+(e.g. Salt Master node), you'll need to install and configure ``kubectl`` on
+it.
+
+For example, to run it on our cluster, you should add ``cluster.<cluster name>.kubernetes.helm``
+class to config node in ``nodes/<your config node fqdn>.yml``, and then modify
+``classes/cluster/<cluster name>/kubernetes/helm.yml``::
+
+  helm:
+    client:
+      kubectl:
+        install: true
+        config:
+          user: 
+            username: ${_param:kubernetes_admin_user}
+            password: ${_param:kubernetes_admin_password}
+          cluster:
+            server: https://${_param:kubernetes_control_address}
+            certificate_authority: /etc/ssl/certs/ca-salt_master_ca.crt
+
+Note that we're using parameters that are already specified in ``cluster.<cluster name>.kubernetes``
+class for simplicity. We are also using path to CA certificate specifit to
+config node. If you don't have such file, you'll have to specify base64
+representation of certificate file in ``certificate_authority_data``.
+
+Now if we apply state ``helm`` to our config node, both ``helm`` and ``kubectl``
+binaries will be installed and ``kubectl`` config will be created in
+``/srv/helm/kubeconfig.yaml``.
diff --git a/doc/source/index.rst b/doc/source/index.rst
index a6210d3..3931253 100644
--- a/doc/source/index.rst
+++ b/doc/source/index.rst
@@ -1 +1,9 @@
-.. include:: ../../README.rst
+==========================
+Helm Formula documentation
+==========================
+
+.. toctree::
+   :maxdepth: 2
+
+   README
+   guide