Merge tag '2016.4.1' into debian/unstable
2016.4.1
diff --git a/.gitignore b/.gitignore
new file mode 100644
index 0000000..1bfce6e
--- /dev/null
+++ b/.gitignore
@@ -0,0 +1,4 @@
+tests/build/
+*.swp
+*.pyc
+.ropeproject
\ No newline at end of file
diff --git a/.gitreview b/.gitreview
new file mode 100644
index 0000000..83d8dfc
--- /dev/null
+++ b/.gitreview
@@ -0,0 +1,4 @@
+[gerrit]
+host=review.openstack.org
+port=29418
+project=openstack/salt-formula-heat.git
diff --git a/CHANGELOG.rst b/CHANGELOG.rst
new file mode 100644
index 0000000..d8f896c
--- /dev/null
+++ b/CHANGELOG.rst
@@ -0,0 +1,10 @@
+heat formula
+============
+
+2016.4.1 (2016-04-15)
+
+- second release
+
+0.0.1 (2015-08-03)
+
+- Initial formula setup
diff --git a/LICENSE b/LICENSE
new file mode 100644
index 0000000..8d968b6
--- /dev/null
+++ b/LICENSE
@@ -0,0 +1,201 @@
+ Apache License
+ Version 2.0, January 2004
+ http://www.apache.org/licenses/
+
+ TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION
+
+ 1. Definitions.
+
+ "License" shall mean the terms and conditions for use, reproduction,
+ and distribution as defined by Sections 1 through 9 of this document.
+
+ "Licensor" shall mean the copyright owner or entity authorized by
+ the copyright owner that is granting the License.
+
+ "Legal Entity" shall mean the union of the acting entity and all
+ other entities that control, are controlled by, or are under common
+ control with that entity. For the purposes of this definition,
+ "control" means (i) the power, direct or indirect, to cause the
+ direction or management of such entity, whether by contract or
+ otherwise, or (ii) ownership of fifty percent (50%) or more of the
+ outstanding shares, or (iii) beneficial ownership of such entity.
+
+ "You" (or "Your") shall mean an individual or Legal Entity
+ exercising permissions granted by this License.
+
+ "Source" form shall mean the preferred form for making modifications,
+ including but not limited to software source code, documentation
+ source, and configuration files.
+
+ "Object" form shall mean any form resulting from mechanical
+ transformation or translation of a Source form, including but
+ not limited to compiled object code, generated documentation,
+ and conversions to other media types.
+
+ "Work" shall mean the work of authorship, whether in Source or
+ Object form, made available under the License, as indicated by a
+ copyright notice that is included in or attached to the work
+ (an example is provided in the Appendix below).
+
+ "Derivative Works" shall mean any work, whether in Source or Object
+ form, that is based on (or derived from) the Work and for which the
+ editorial revisions, annotations, elaborations, or other modifications
+ represent, as a whole, an original work of authorship. For the purposes
+ of this License, Derivative Works shall not include works that remain
+ separable from, or merely link (or bind by name) to the interfaces of,
+ the Work and Derivative Works thereof.
+
+ "Contribution" shall mean any work of authorship, including
+ the original version of the Work and any modifications or additions
+ to that Work or Derivative Works thereof, that is intentionally
+ submitted to Licensor for inclusion in the Work by the copyright owner
+ or by an individual or Legal Entity authorized to submit on behalf of
+ the copyright owner. For the purposes of this definition, "submitted"
+ means any form of electronic, verbal, or written communication sent
+ to the Licensor or its representatives, including but not limited to
+ communication on electronic mailing lists, source code control systems,
+ and issue tracking systems that are managed by, or on behalf of, the
+ Licensor for the purpose of discussing and improving the Work, but
+ excluding communication that is conspicuously marked or otherwise
+ designated in writing by the copyright owner as "Not a Contribution."
+
+ "Contributor" shall mean Licensor and any individual or Legal Entity
+ on behalf of whom a Contribution has been received by Licensor and
+ subsequently incorporated within the Work.
+
+ 2. Grant of Copyright License. Subject to the terms and conditions of
+ this License, each Contributor hereby grants to You a perpetual,
+ worldwide, non-exclusive, no-charge, royalty-free, irrevocable
+ copyright license to reproduce, prepare Derivative Works of,
+ publicly display, publicly perform, sublicense, and distribute the
+ Work and such Derivative Works in Source or Object form.
+
+ 3. Grant of Patent License. Subject to the terms and conditions of
+ this License, each Contributor hereby grants to You a perpetual,
+ worldwide, non-exclusive, no-charge, royalty-free, irrevocable
+ (except as stated in this section) patent license to make, have made,
+ use, offer to sell, sell, import, and otherwise transfer the Work,
+ where such license applies only to those patent claims licensable
+ by such Contributor that are necessarily infringed by their
+ Contribution(s) alone or by combination of their Contribution(s)
+ with the Work to which such Contribution(s) was submitted. If You
+ institute patent litigation against any entity (including a
+ cross-claim or counterclaim in a lawsuit) alleging that the Work
+ or a Contribution incorporated within the Work constitutes direct
+ or contributory patent infringement, then any patent licenses
+ granted to You under this License for that Work shall terminate
+ as of the date such litigation is filed.
+
+ 4. Redistribution. You may reproduce and distribute copies of the
+ Work or Derivative Works thereof in any medium, with or without
+ modifications, and in Source or Object form, provided that You
+ meet the following conditions:
+
+ (a) You must give any other recipients of the Work or
+ Derivative Works a copy of this License; and
+
+ (b) You must cause any modified files to carry prominent notices
+ stating that You changed the files; and
+
+ (c) You must retain, in the Source form of any Derivative Works
+ that You distribute, all copyright, patent, trademark, and
+ attribution notices from the Source form of the Work,
+ excluding those notices that do not pertain to any part of
+ the Derivative Works; and
+
+ (d) If the Work includes a "NOTICE" text file as part of its
+ distribution, then any Derivative Works that You distribute must
+ include a readable copy of the attribution notices contained
+ within such NOTICE file, excluding those notices that do not
+ pertain to any part of the Derivative Works, in at least one
+ of the following places: within a NOTICE text file distributed
+ as part of the Derivative Works; within the Source form or
+ documentation, if provided along with the Derivative Works; or,
+ within a display generated by the Derivative Works, if and
+ wherever such third-party notices normally appear. The contents
+ of the NOTICE file are for informational purposes only and
+ do not modify the License. You may add Your own attribution
+ notices within Derivative Works that You distribute, alongside
+ or as an addendum to the NOTICE text from the Work, provided
+ that such additional attribution notices cannot be construed
+ as modifying the License.
+
+ You may add Your own copyright statement to Your modifications and
+ may provide additional or different license terms and conditions
+ for use, reproduction, or distribution of Your modifications, or
+ for any such Derivative Works as a whole, provided Your use,
+ reproduction, and distribution of the Work otherwise complies with
+ the conditions stated in this License.
+
+ 5. Submission of Contributions. Unless You explicitly state otherwise,
+ any Contribution intentionally submitted for inclusion in the Work
+ by You to the Licensor shall be under the terms and conditions of
+ this License, without any additional terms or conditions.
+ Notwithstanding the above, nothing herein shall supersede or modify
+ the terms of any separate license agreement you may have executed
+ with Licensor regarding such Contributions.
+
+ 6. Trademarks. This License does not grant permission to use the trade
+ names, trademarks, service marks, or product names of the Licensor,
+ except as required for reasonable and customary use in describing the
+ origin of the Work and reproducing the content of the NOTICE file.
+
+ 7. Disclaimer of Warranty. Unless required by applicable law or
+ agreed to in writing, Licensor provides the Work (and each
+ Contributor provides its Contributions) on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
+ implied, including, without limitation, any warranties or conditions
+ of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A
+ PARTICULAR PURPOSE. You are solely responsible for determining the
+ appropriateness of using or redistributing the Work and assume any
+ risks associated with Your exercise of permissions under this License.
+
+ 8. Limitation of Liability. In no event and under no legal theory,
+ whether in tort (including negligence), contract, or otherwise,
+ unless required by applicable law (such as deliberate and grossly
+ negligent acts) or agreed to in writing, shall any Contributor be
+ liable to You for damages, including any direct, indirect, special,
+ incidental, or consequential damages of any character arising as a
+ result of this License or out of the use or inability to use the
+ Work (including but not limited to damages for loss of goodwill,
+ work stoppage, computer failure or malfunction, or any and all
+ other commercial damages or losses), even if such Contributor
+ has been advised of the possibility of such damages.
+
+ 9. Accepting Warranty or Additional Liability. While redistributing
+ the Work or Derivative Works thereof, You may choose to offer,
+ and charge a fee for, acceptance of support, warranty, indemnity,
+ or other liability obligations and/or rights consistent with this
+ License. However, in accepting such obligations, You may act only
+ on Your own behalf and on Your sole responsibility, not on behalf
+ of any other Contributor, and only if You agree to indemnify,
+ defend, and hold each Contributor harmless for any liability
+ incurred by, or claims asserted against, such Contributor by reason
+ of your accepting any such warranty or additional liability.
+
+ END OF TERMS AND CONDITIONS
+
+ APPENDIX: How to apply the Apache License to your work.
+
+ To apply the Apache License to your work, attach the following
+ boilerplate notice, with the fields enclosed by brackets "[]"
+ replaced with your own identifying information. (Don't include
+ the brackets!) The text should be enclosed in the appropriate
+ comment syntax for the file format. We also recommend that a
+ file or class name and description of purpose be included on the
+ same "printed page" as the copyright notice for easier
+ identification within third-party archives.
+
+ Copyright [yyyy] [name of copyright owner]
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
diff --git a/Makefile b/Makefile
new file mode 100644
index 0000000..fc83783
--- /dev/null
+++ b/Makefile
@@ -0,0 +1,26 @@
+DESTDIR=/
+SALTENVDIR=/usr/share/salt-formulas/env
+RECLASSDIR=/usr/share/salt-formulas/reclass
+FORMULANAME=$(shell grep name: metadata.yml|head -1|cut -d : -f 2|grep -Eo '[a-z0-9\-]*')
+
+all:
+ @echo "make install - Install into DESTDIR"
+ @echo "make test - Run tests"
+ @echo "make clean - Cleanup after tests run"
+
+install:
+ # Formula
+ [ -d $(DESTDIR)/$(SALTENVDIR) ] || mkdir -p $(DESTDIR)/$(SALTENVDIR)
+ cp -a $(FORMULANAME) $(DESTDIR)/$(SALTENVDIR)/
+ [ ! -d _modules ] || cp -a _modules $(DESTDIR)/$(SALTENVDIR)/
+ [ ! -d _states ] || cp -a _states $(DESTDIR)/$(SALTENVDIR)/ || true
+ # Metadata
+ [ -d $(DESTDIR)/$(RECLASSDIR)/service/$(FORMULANAME) ] || mkdir -p $(DESTDIR)/$(RECLASSDIR)/service/$(FORMULANAME)
+ cp -a metadata/service/* $(DESTDIR)/$(RECLASSDIR)/service/$(FORMULANAME)
+
+test:
+ [ ! -d tests ] || (cd tests; ./run_tests.sh)
+
+clean:
+ [ ! -d tests/build ] || rm -rf tests/build
+ [ ! -d build ] || rm -rf build
diff --git a/README.rst b/README.rst
new file mode 100644
index 0000000..b9058f1
--- /dev/null
+++ b/README.rst
@@ -0,0 +1,119 @@
+
+====
+Heat
+====
+
+Heat is the main project in the OpenStack Orchestration program. It implements an orchestration engine to launch multiple composite cloud applications based on templates in the form of text files that can be treated like code. A native Heat template format is evolving, but Heat also endeavours to provide compatibility with the AWS CloudFormation template format, so that many existing CloudFormation templates can be launched on OpenStack. Heat provides both an OpenStack-native ReST API and a CloudFormation-compatible Query API.
+
+Sample pillars
+==============
+
+Single Heat services on the controller node
+
+.. code-block:: yaml
+
+ heat:
+ server:
+ enabled: true
+ version: icehouse
+ region: RegionOne
+ bind:
+ metadata:
+ address: 10.0.106.10
+ port: 8000
+ waitcondition:
+ address: 10.0.106.10
+ port: 8000
+ watch:
+ address: 10.0.106.10
+ port: 8003
+ cloudwatch:
+ host: 10.0.106.20
+ api:
+ host: 10.0.106.20
+ api_cfn:
+ host: 10.0.106.20
+ database:
+ engine: mysql
+ host: 10.0.106.20
+ port: 3306
+ name: heat
+ user: heat
+ password: password
+ identity:
+ engine: keystone
+ host: 10.0.106.20
+ port: 35357
+ tenant: service
+ user: heat
+ password: password
+ message_queue:
+ engine: rabbitmq
+ host: 10.0.106.20
+ port: 5672
+ user: openstack
+ password: password
+ virtual_host: '/openstack'
+ ha_queues: True
+
+Heat client with specified git templates
+
+.. code-block:: yaml
+
+ heat:
+ client:
+ enabled: true
+ source:
+ engine: git
+ address: git@repo.domain.com/heat-templates.git
+ revision: master
+
+Heat system definition of several stacks/systems
+
+.. code-block:: yaml
+
+ heat:
+ control:
+ enabled: true
+ system:
+ web_production:
+ format: hot
+ template_file: /srv/heat/template/web_cluster.hot
+ environment: /srv/heat/env/web_cluster/prd.env
+ web_staging:
+ format: hot
+ template_file: /srv/heat/template/web_cluster.hot
+ environment: /srv/heat/env/web_cluster/stg.env
+
+Ceilometer notification
+
+.. code-block:: yaml
+
+ heat:
+ server:
+ enabled: true
+ version: icehouse
+ notification: true
+
+Usage
+=====
+
+Install Contrail Heat plugin for additional resources
+
+.. code-block:: bash
+
+ pip install git+https://github.com/Juniper/contrail-heat.git@R1.30
+
+Read more
+=========
+
+* http://docs.openstack.org/developer/heat/man/heat-keystone-setup.html
+* http://docwiki.cisco.com/wiki/OpenStack_Havana_Release:_High-Availability_Manual_Deployment_Guide
+
+
+Things to improve
+=================
+
+* IBM UrbanCode Deploy - has resources for AWS and VMWare
+ http://www.ibm.com/developerworks/rational/library/multi-platform-application-deployment-urbancode-deploy/
+
diff --git a/VERSION b/VERSION
new file mode 100644
index 0000000..1bad316
--- /dev/null
+++ b/VERSION
@@ -0,0 +1 @@
+2016.4.1
diff --git a/_modules/heat.py b/_modules/heat.py
new file mode 100644
index 0000000..8265951
--- /dev/null
+++ b/_modules/heat.py
@@ -0,0 +1,257 @@
+# -*- coding: utf-8 -*-
+'''
+Module for handling Heat stacks.
+
+:depends: - python-heatclient>=0.2.3 Python module
+:configuration: This module is not usable until the following are specified
+ either in a pillar or in the minion's config file::
+
+ keystone.user: admin
+ keystone.password: verybadpass
+ keystone.tenant: admin
+ keystone.tenant_id: f80919baedab48ec8931f200c65a50df
+ keystone.insecure: False #(optional)
+ keystone.auth_url: 'http://127.0.0.1:5000/v2.0/'
+
+ If configuration for multiple openstack accounts is required, they can be
+ set up as different configuration profiles:
+ For example::
+
+ openstack1:
+ keystone.user: admin
+ keystone.password: verybadpass
+ keystone.tenant: admin
+ keystone.tenant_id: f80919baedab48ec8931f200c65a50df
+ keystone.auth_url: 'http://127.0.0.1:5000/v2.0/'
+
+ openstack2:
+ keystone.user: admin
+ keystone.password: verybadpass
+ keystone.tenant: admin
+ keystone.tenant_id: f80919baedab48ec8931f200c65a50df
+ keystone.auth_url: 'http://127.0.0.2:5000/v2.0/'
+
+ With this configuration in place, any of the heat functions can make
+ use of a configuration profile by declaring it explicitly.
+ For example::
+
+ salt '*' heat.stack_list profile=openstack1
+
+'''
+
+from __future__ import absolute_import
+import logging
+LOG = logging.getLogger(__name__)
+
+# Import third party libs
+HAS_HEAT = False
+try:
+ from heatclient.v1 import client
+ HAS_HEAT = True
+except Exception, e:
+ LOG.trace("heatclient or keystone is not installed %s" % e)
+
+import json
+import glob
+from os.path import basename
+from yaml import load, dump
+
+HEAT_ROOT = "/srv/heat/env"
+
+TEMPLATE_PATH = "template"
+ENV_PATH ="env"
+
+HOT = ".hot"
+ENV = ".env"
+
+HOT_MASK = "*%s" % HOT
+ENV_MASK = "*%s" % ENV
+
+
+def _autheticate(func_name):
+ '''
+ Authenticate requests with the salt keystone module and format return data
+ '''
+ @wraps(func_name)
+ def decorator_method(*args, **kwargs):
+ '''
+ Authenticate request and format return data
+ '''
+ connection_args = {'profile': kwargs.get('profile', None)}
+ nkwargs = {}
+ for kwarg in kwargs:
+ if 'connection_' in kwarg:
+ connection_args.update({kwarg: kwargs[kwarg]})
+ elif '__' not in kwarg:
+ nkwargs.update({kwarg: kwargs[kwarg]})
+ kstone = __salt__['keystone.auth'](**connection_args)
+ token = kstone.auth_token
+ endpoint = kstone.service_catalog.url_for(
+ service_type='orchestration',
+ endpoint_type='publicURL')
+ heat_interface = client.Client(
+ endpoint_url=endpoint, token=token)
+ return_data = func_name(heat_interface, *args, **nkwargs)
+ if isinstance(return_data, list):
+ # format list as a dict for rendering
+ return {data.get('name', None) or data['id']: data
+ for data in return_data}
+ return return_data
+ return decorator_method
+
+
+def _filename(path):
+ """
+ helper
+ return filename without extension
+ """
+ return basename(path).split(".")[0]
+
+
+def _get_templates(choices=True):
+ """
+ if choices is False return array of full path
+ """
+
+ path = "/".join([HEAT_ROOT, TEMPLATE_PATH])
+
+ templates = []
+
+ for path in glob.glob("/".join([path, HOT_MASK])):
+ name = filename(path)
+ templates.append((name, name.replace("_", " ").capitalize()))
+
+ return sorted(templates)
+
+
+def _get_environments(template_name=None):
+ """return environments choices
+ """
+ path = "/".join([HEAT_ROOT, ENV_PATH])
+
+ environments = []
+
+ if template_name:
+ join = [path, template_name, ENV_MASK]
+ else:
+ join = [path, ENV_MASK]
+
+ for path in glob.glob("/".join(join)):
+ name = filename(path)
+ environments.append((name, name.replace("_", " ").capitalize()))
+
+ return sorted(environments)
+
+
+def _get_template_data(name):
+ """
+ load and return template data
+ """
+
+ path = "/".join([
+ HEAT_ROOT,
+ TEMPLATE_PATH,
+ "".join([name, HOT])
+ ])
+
+ try:
+ f = open(path, 'r')
+ data = load(f)
+ except Exception, e:
+ raise e
+
+ return data
+
+
+def _get_environment_data(template_name, name):
+ """
+ load and return parameters data
+ """
+
+ path = "/".join([
+ HEAT_ROOT,
+ ENV_PATH,
+ template_name,
+ "".join([name, ENV])
+ ])
+
+ try:
+ f = open(path, 'r')
+ data = load(f)
+ except Exception, e:
+ raise e
+
+ return data
+
+
+def __virtual__():
+ '''
+ Only load this module if Heat
+ is installed on this minion.
+ '''
+ if HAS_HEAT:
+ return 'heat'
+ return False
+
+__opts__ = {}
+
+
+def stack_list(tenant=None, **kwargs):
+
+ heat = heatclient()
+
+ ret = {}
+ ret["result"] = heat.stacks.list()
+
+ return ret
+
+
+def stack_create(template, environment=None, name=None, parameters=None, timeout_mins=5,
+ enable_rollback=True, **kwargs):
+ '''
+ Return a specific endpoint (gitlab endpoint-get)
+
+ :params template: template name
+ :params name: if not provided template will be used
+
+ CLI Example:
+
+ .. code-block:: bash
+
+ salt '*' heat.stack_create template_name
+ '''
+
+ heat = heatclient()
+
+ # get template
+
+ template_data = get_template_data(template)
+
+ # Validate the template and get back the params.
+ kwargs = {}
+ kwargs['template'] = str(json.dumps(template_data, cls=CustomEncoder))
+
+ try:
+ validated = heat.stacks.validate(**kwargs)
+ except Exception as e:
+ LOG.error("Template not valid %s" % e)
+
+ fields = {
+ 'stack_name': name,
+ 'template': json.dumps(template_data, cls=CustomEncoder),
+ 'environment': parameters,
+ 'parameters': parameters,
+ 'timeout_mins': timeout_mins,
+ 'disable_rollback': enable_rollback,
+ }
+ #LOG.debug(dir(heat))
+
+ heat.stacks.create(**fields)
+
+ return {'status': result}
+
+
+def stack_delete(template, name=None, parameters=None, **kwargs):
+
+ return {'Error': 'Could not delete stack.'}
+
diff --git a/_states/heat.py b/_states/heat.py
new file mode 100644
index 0000000..ef57b5f
--- /dev/null
+++ b/_states/heat.py
@@ -0,0 +1,50 @@
+# -*- coding: utf-8 -*-
+'''
+Management of Heat stacks
+==============================
+
+:depends: - python-heatclient>=0.2.3 Python module
+:configuration: See :py:mod:`salt.modules.heat` for setup instructions.
+
+.. code-block:: yaml
+
+ heat.keystone_endpoint: 'http://icehouse.cloudlab.cz:5000/v2.0'
+ heat.url: 'http://10.0.106.19:8004/v1/fc015a00cda344e9b66e3d99e0a0591a'
+ heat.username: 'admin'
+ heat.tenant_id: 'fc015a00cda344e9b66e3d99e0a0591a'
+ heat.password: 'cloudlab'
+
+'''
+
+def __virtual__():
+ '''
+ Only load if the gitlab module is in __salt__
+ '''
+ return 'heat' if 'python-heatclient' in __salt__ else False
+
+
+def stack_absent(name):
+
+ pass
+
+def stack_present(name, template_file=None, environment_file=None):
+ ''''
+ Enforces stack
+
+ :param:name: The name of the stack to create
+ :param:template_file: Template file
+ '''
+
+ ret = {'name': name,
+ 'changes': {},
+ 'result': True,
+ 'comment': 'Stack "{0}" already exists'.format(name)}
+
+ # Create project
+ __salt__['gitlab.project_create'](name, description, enabled,
+ profile=profile,
+ **connection_args)
+ ret['comment'] = 'Tenant "{0}" has been added'.format(name)
+ ret['changes']['Tenant'] = 'Created'
+
+ return ret
diff --git a/doc/source/conf.py b/doc/source/conf.py
new file mode 100644
index 0000000..8a73af2
--- /dev/null
+++ b/doc/source/conf.py
@@ -0,0 +1,73 @@
+# -*- coding: utf-8 -*-
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
+# implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+import os
+import sys
+
+sys.path.insert(0, os.path.abspath('../..'))
+# -- General configuration ----------------------------------------------------
+
+# Add any Sphinx extension module names here, as strings. They can be
+# extensions coming with Sphinx (named 'sphinx.ext.*') or your custom ones.
+extensions = [
+ 'sphinx.ext.autodoc',
+]
+
+# autodoc generation is a bit aggressive and a nuisance when doing heavy
+# text edit cycles.
+# execute "export SPHINX_DEBUG=1" in your terminal to disable
+
+# The suffix of source filenames.
+source_suffix = '.rst'
+
+# The master toctree document.
+master_doc = 'index'
+
+# General information about the project.
+project = u'salt-formula-heat'
+copyright = u'2015, OpenStack Foundation'
+
+# If true, '()' will be appended to :func: etc. cross-reference text.
+add_function_parentheses = True
+
+# If true, the current module name will be prepended to all description
+# unit titles (such as .. function::).
+add_module_names = True
+
+# The name of the Pygments (syntax highlighting) style to use.
+pygments_style = 'sphinx'
+
+# -- Options for HTML output --------------------------------------------------
+
+# The theme to use for HTML and HTML Help pages. Major themes that come with
+# Sphinx are currently 'default' and 'sphinxdoc'.
+# html_theme_path = ["."]
+# html_theme = '_theme'
+# html_static_path = ['static']
+
+# Output file base name for HTML help builder.
+htmlhelp_basename = '%sdoc' % project
+
+# Grouping the document tree into LaTeX files. List of tuples
+# (source start file, target name, title, author, documentclass
+# [howto/manual]).
+latex_documents = [
+ ('index',
+ '%s.tex' % project,
+ u'%s Documentation' % project,
+ u'OpenStack Foundation', 'manual'),
+]
+
+# Example configuration for intersphinx: refer to the Python standard library.
+# intersphinx_mapping = {'http://docs.python.org/': None}
diff --git a/doc/source/index.rst b/doc/source/index.rst
new file mode 100644
index 0000000..a6210d3
--- /dev/null
+++ b/doc/source/index.rst
@@ -0,0 +1 @@
+.. include:: ../../README.rst
diff --git a/heat/client.sls b/heat/client.sls
new file mode 100644
index 0000000..e885147
--- /dev/null
+++ b/heat/client.sls
@@ -0,0 +1,27 @@
+{%- from "heat/map.jinja" import client with context %}
+{%- if client.enabled %}
+
+include:
+- git
+
+heat_client_packages:
+ pkg.installed:
+ - names: {{ client.pkgs }}
+
+heat_client_home:
+ file.directory:
+ - name: /srv/heat
+
+{%- if client.source.engine == 'git' %}
+
+{{ client.source.address }}:
+ git.latest:
+ - target: /srv/heat/env
+ - rev: {{ client.source.revision }}
+ - require:
+ - pkg: git_packages
+ - file: /srv/heat
+
+{%- endif %}
+
+{%- endif %}
\ No newline at end of file
diff --git a/heat/control.sls b/heat/control.sls
new file mode 100644
index 0000000..ecb16bf
--- /dev/null
+++ b/heat/control.sls
@@ -0,0 +1,14 @@
+{%- from "heat/map.jinja" import control with context %}
+{%- for system_name, system in control.system.iteritems() %}
+
+heat_stack_{{ system_name }}:
+ heat.stack_present:
+ - name: {{ system_name }}
+ {%- if system.template_file is defined %}
+ - template_file: {{ system.template_file }}
+ {%- endif %}
+ {%- if system.environment_file is defined %}
+ - environment_file: {{ system.environment_file }}
+ {%- endif %}
+
+{%- endfor %}
\ No newline at end of file
diff --git a/heat/files/heka.toml b/heat/files/heka.toml
new file mode 100644
index 0000000..4546613
--- /dev/null
+++ b/heat/files/heka.toml
@@ -0,0 +1,16 @@
+{%- if pillar.heat.server is defined %}
+
+[logstreamer_heat]
+type = "LogstreamerInput"
+log_directory = "/var/log/heat"
+file_match = '(?P<Service>.+)\.log\.?(?P<Seq>\d*)$'
+differentiator = ["'heat','_','Service'"]
+priority = ["^Index"]
+decoder = "openstack"
+
+[openstack]
+type = "SandboxDecoder"
+filename = "lua_modules/decoders/openstack.lua"
+module_directory = "/usr/share/heka/lua_modules;/usr/share/heka/lua_modules/common"
+
+{% endif %}
diff --git a/heat/files/juno/api-paste.ini b/heat/files/juno/api-paste.ini
new file mode 100644
index 0000000..271296b
--- /dev/null
+++ b/heat/files/juno/api-paste.ini
@@ -0,0 +1,98 @@
+# heat-api pipeline
+[pipeline:heat-api]
+pipeline = request_id faultwrap ssl versionnegotiation authurl authtoken context apiv1app
+
+# heat-api pipeline for standalone heat
+# ie. uses alternative auth backend that authenticates users against keystone
+# using username and password instead of validating token (which requires
+# an admin/service token).
+# To enable, in heat.conf:
+# [paste_deploy]
+# flavor = standalone
+#
+[pipeline:heat-api-standalone]
+pipeline = request_id faultwrap ssl versionnegotiation authurl authpassword context apiv1app
+
+# heat-api pipeline for custom cloud backends
+# i.e. in heat.conf:
+# [paste_deploy]
+# flavor = custombackend
+#
+[pipeline:heat-api-custombackend]
+pipeline = request_id faultwrap versionnegotiation context custombackendauth apiv1app
+
+# heat-api-cfn pipeline
+[pipeline:heat-api-cfn]
+pipeline = cfnversionnegotiation ec2authtoken authtoken context apicfnv1app
+
+# heat-api-cfn pipeline for standalone heat
+# relies exclusively on authenticating with ec2 signed requests
+[pipeline:heat-api-cfn-standalone]
+pipeline = cfnversionnegotiation ec2authtoken context apicfnv1app
+
+# heat-api-cloudwatch pipeline
+[pipeline:heat-api-cloudwatch]
+pipeline = versionnegotiation ec2authtoken authtoken context apicwapp
+
+# heat-api-cloudwatch pipeline for standalone heat
+# relies exclusively on authenticating with ec2 signed requests
+[pipeline:heat-api-cloudwatch-standalone]
+pipeline = versionnegotiation ec2authtoken context apicwapp
+
+[app:apiv1app]
+paste.app_factory = heat.common.wsgi:app_factory
+heat.app_factory = heat.api.openstack.v1:API
+
+[app:apicfnv1app]
+paste.app_factory = heat.common.wsgi:app_factory
+heat.app_factory = heat.api.cfn.v1:API
+
+[app:apicwapp]
+paste.app_factory = heat.common.wsgi:app_factory
+heat.app_factory = heat.api.cloudwatch:API
+
+[filter:versionnegotiation]
+paste.filter_factory = heat.common.wsgi:filter_factory
+heat.filter_factory = heat.api.openstack:version_negotiation_filter
+
+[filter:faultwrap]
+paste.filter_factory = heat.common.wsgi:filter_factory
+heat.filter_factory = heat.api.openstack:faultwrap_filter
+
+[filter:cfnversionnegotiation]
+paste.filter_factory = heat.common.wsgi:filter_factory
+heat.filter_factory = heat.api.cfn:version_negotiation_filter
+
+[filter:cwversionnegotiation]
+paste.filter_factory = heat.common.wsgi:filter_factory
+heat.filter_factory = heat.api.cloudwatch:version_negotiation_filter
+
+[filter:context]
+paste.filter_factory = heat.common.context:ContextMiddleware_filter_factory
+
+[filter:ec2authtoken]
+paste.filter_factory = heat.api.aws.ec2token:EC2Token_filter_factory
+
+[filter:ssl]
+paste.filter_factory = heat.common.wsgi:filter_factory
+heat.filter_factory = heat.api.openstack:sslmiddleware_filter
+
+# Middleware to set auth_url header appropriately
+[filter:authurl]
+paste.filter_factory = heat.common.auth_url:filter_factory
+
+# Auth middleware that validates token against keystone
+[filter:authtoken]
+paste.filter_factory = keystonemiddleware.auth_token:filter_factory
+
+# Auth middleware that validates username/password against keystone
+[filter:authpassword]
+paste.filter_factory = heat.common.auth_password:filter_factory
+
+# Auth middleware that validates against custom backend
+[filter:custombackendauth]
+paste.filter_factory = heat.common.custom_backend_auth:filter_factory
+
+# Middleware to set x-openstack-request-id in http response header
+[filter:request_id]
+paste.filter_factory = heat.openstack.common.middleware.request_id:RequestIdMiddleware.factory
diff --git a/heat/files/juno/heat.conf.Debian b/heat/files/juno/heat.conf.Debian
new file mode 100644
index 0000000..1f4a37f
--- /dev/null
+++ b/heat/files/juno/heat.conf.Debian
@@ -0,0 +1,1388 @@
+{%- from "heat/map.jinja" import server with context %}
+[DEFAULT]
+
+#
+# Options defined in heat.common.config
+#
+
+# Name of the engine node. This can be an opaque identifier.
+# It is not necessarily a hostname, FQDN, or IP address.
+# (string value)
+#host=heat
+
+sql_connection = {{ server.database.engine }}://{{ server.database.user }}:{{ server.database.password }}@{{ server.database.host }}/{{ server.database.name }}
+
+#
+# Options defined in heat.common.config
+#
+
+# The default user for new instances. This option is
+# deprecated and will be removed in the Juno release. If it's
+# empty, Heat will use the default user set up with your cloud
+# image (for OS::Nova::Server) or 'ec2-user' (for
+# AWS::EC2::Instance). (string value)
+#instance_user=ec2-user
+
+# Driver to use for controlling instances. (string value)
+#instance_driver=heat.engine.nova
+
+# List of directories to search for plug-ins. (list value)
+#plugin_dirs=/usr/lib64/heat,/usr/lib/heat
+
+# The directory to search for environment files. (string
+# value)
+#environment_dir=/etc/heat/environment.d
+
+# Select deferred auth method, stored password or trusts.
+# (string value)
+#deferred_auth_method=password
+deferred_auth_method=trusts
+
+# Subset of trustor roles to be delegated to heat. If
+# trusts_delegated_roles is set to [], all roles of a user
+# will be delegated to heat when creating a stack. (list
+# value)
+#trusts_delegated_roles=heat_stack_owner
+trusts_delegated_roles=heat_stack_owner
+
+# Maximum resources allowed per top-level stack. (integer
+# value)
+#max_resources_per_stack=1000
+
+# Maximum number of stacks any one tenant may have active at
+# one time. (integer value)
+#max_stacks_per_tenant=100
+
+# Number of times to retry to bring a resource to a non-error
+# state. Set to 0 to disable retries. (integer value)
+#action_retry_limit=5
+
+# Controls how many events will be pruned whenever a stack's
+# events exceed max_events_per_stack. Set this lower to keep
+# more events at the expense of more frequent purges. (integer
+# value)
+#event_purge_batch_size=10
+
+# Maximum events that will be available per stack. Older
+# events will be deleted when this is reached. Set to 0 for
+# unlimited events per stack. (integer value)
+#max_events_per_stack=1000
+
+# Timeout in seconds for stack action (ie. create or update).
+# (integer value)
+#stack_action_timeout=3600
+
+# RPC timeout for the engine liveness check that is used for
+# stack locking. (integer value)
+#engine_life_check_timeout=2
+
+# Enable the legacy OS::Heat::CWLiteAlarm resource. (boolean
+# value)
+#enable_cloud_watch_lite=true
+
+# Enable the preview Stack Abandon feature. (boolean value)
+#enable_stack_abandon=false
+
+# Enable the preview Stack Adopt feature. (boolean value)
+#enable_stack_adopt=false
+
+# Deprecated. (string value)
+#onready=<None>
+
+
+#
+# Options defined in heat.common.config
+#
+
+# Seconds between running periodic tasks. (integer value)
+#periodic_interval=60
+
+# URL of the Heat metadata server. (string value)
+heat_metadata_server_url=http://{{ server.metadata.host }}:{{ server.metadata.port }}
+
+# URL of the Heat waitcondition server. (string value)
+heat_waitcondition_server_url=http://{{ server.waitcondition.host }}:{{ server.waitcondition.port }}/v1/waitcondition
+
+# URL of the Heat CloudWatch server. (string value)
+heat_watch_server_url=http://{{ server.watch.host }}:{{ server.watch.port }}
+
+# Instance connection to CFN/CW API via https. (string value)
+#instance_connection_is_secure=0
+
+# Instance connection to CFN/CW API validate certs if SSL is
+# used. (string value)
+#instance_connection_https_validate_certificates=1
+
+# Default region name used to get services endpoints. (string
+# value)
+#region_name_for_services=<None>
+
+# Keystone role for heat template-defined users. (string
+# value)
+#heat_stack_user_role=heat_stack_user
+
+# Keystone domain ID which contains heat template-defined
+# users. If this option is set, stack_user_domain_name option
+# will be ignored. (string value)
+# Deprecated group/name - [DEFAULT]/stack_user_domain
+#stack_user_domain_id=<None>
+
+# Keystone domain name which contains heat template-defined
+# users. If `stack_user_domain_id` option is set, this option
+# is ignored. (string value)
+#stack_user_domain_name=<None>
+
+{%- if server.stack_domain_admin is defined %}
+
+# Keystone username, a user with roles sufficient to manage
+# users and projects in the stack_user_domain. (string value)
+stack_domain_admin={{ server.stack_domain_admin.name }}
+
+# Keystone password for stack_domain_admin user. (string
+# value)
+stack_domain_admin_password={{ server.stack_domain_admin.password }}
+
+# Keystone domain name which contains heat template-defined
+# users. If `stack_user_domain_id` option is set, this option
+# is ignored. (string value)
+stack_user_domain_name={{ server.stack_domain_admin.domain }}
+
+{%- else %}
+
+# Keystone username, a user with roles sufficient to manage
+# users and projects in the stack_user_domain. (string value)
+#stack_domain_admin=<None>
+
+# Keystone password for stack_domain_admin user. (string
+# value)
+#stack_domain_admin_password=<None>
+
+{%- endif %}
+
+# Maximum raw byte size of any template. (integer value)
+#max_template_size=524288
+
+# Maximum depth allowed when using nested stacks. (integer
+# value)
+#max_nested_stack_depth=3
+
+# Number of heat-engine processes to fork and run. (integer
+# value)
+#num_engine_workers=1
+
+
+#
+# Options defined in heat.common.wsgi
+#
+
+# Maximum raw byte size of JSON request body. Should be larger
+# than max_template_size. (integer value)
+#max_json_body_size=1048576
+
+
+#
+# Options defined in oslo.messaging
+#
+
+# Use durable queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
+#amqp_durable_queues=false
+
+# Auto-delete queues in AMQP. (boolean value)
+#amqp_auto_delete=false
+
+# Size of RPC connection pool. (integer value)
+#rpc_conn_pool_size=30
+
+# Qpid broker hostname. (string value)
+#qpid_hostname=localhost
+
+# Qpid broker port. (integer value)
+#qpid_port=5672
+
+# Qpid HA cluster host:port pairs. (list value)
+#qpid_hosts=$qpid_hostname:$qpid_port
+
+# Username for Qpid connection. (string value)
+#qpid_username=
+
+# Password for Qpid connection. (string value)
+#qpid_password=
+
+# Space separated list of SASL mechanisms to use for auth.
+# (string value)
+#qpid_sasl_mechanisms=
+
+# Seconds between connection keepalive heartbeats. (integer
+# value)
+#qpid_heartbeat=60
+
+# Transport to use, either 'tcp' or 'ssl'. (string value)
+#qpid_protocol=tcp
+
+# Whether to disable the Nagle algorithm. (boolean value)
+#qpid_tcp_nodelay=true
+
+# The number of prefetched messages held by receiver. (integer
+# value)
+#qpid_receiver_capacity=1
+
+# The qpid topology version to use. Version 1 is what was
+# originally used by impl_qpid. Version 2 includes some
+# backwards-incompatible changes that allow broker federation
+# to work. Users should update to version 2 when they are
+# able to take everything down, as it requires a clean break.
+# (integer value)
+#qpid_topology_version=1
+
+# SSL version to use (valid only if SSL enabled). valid values
+# are TLSv1 and SSLv23. SSLv2 and SSLv3 may be available on
+# some distributions. (string value)
+#kombu_ssl_version=
+
+# SSL key file (valid only if SSL enabled). (string value)
+#kombu_ssl_keyfile=
+
+# SSL cert file (valid only if SSL enabled). (string value)
+#kombu_ssl_certfile=
+
+# SSL certification authority file (valid only if SSL
+# enabled). (string value)
+#kombu_ssl_ca_certs=
+
+# How long to wait before reconnecting in response to an AMQP
+# consumer cancel notification. (floating point value)
+#kombu_reconnect_delay=1.0
+
+# The RabbitMQ broker address where a single node is used.
+# (string value)
+rabbit_host = {{ server.message_queue.host }}
+
+# The RabbitMQ broker port where a single node is used.
+# (integer value)
+rabbit_port = {{ server.message_queue.port }}
+
+# RabbitMQ HA cluster host:port pairs. (list value)
+#rabbit_hosts=$rabbit_host:$rabbit_port
+
+# Connect over SSL for RabbitMQ. (boolean value)
+#rabbit_use_ssl=false
+
+# The RabbitMQ userid. (string value)
+rabbit_userid = {{ server.message_queue.user }}
+
+# The RabbitMQ password. (string value)
+rabbit_password = {{ server.message_queue.password }}
+
+# The RabbitMQ login method. (string value)
+#rabbit_login_method=AMQPLAIN
+
+# The RabbitMQ virtual host. (string value)
+rabbit_virtual_host = {{ server.message_queue.virtual_host }}
+
+# How frequently to retry connecting with RabbitMQ. (integer
+# value)
+#rabbit_retry_interval=1
+
+# How long to backoff for between retries when connecting to
+# RabbitMQ. (integer value)
+#rabbit_retry_backoff=2
+
+# Maximum number of RabbitMQ connection retries. Default is 0
+# (infinite retry count). (integer value)
+#rabbit_max_retries=0
+
+# Use HA queues in RabbitMQ (x-ha-policy: all). If you change
+# this option, you must wipe the RabbitMQ database. (boolean
+# value)
+rabbit_ha_queues={{ server.message_queue.ha_queues }}
+
+# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake
+# (boolean value)
+#fake_rabbit=false
+
+# ZeroMQ bind address. Should be a wildcard (*), an ethernet
+# interface, or IP. The "host" option should point or resolve
+# to this address. (string value)
+#rpc_zmq_bind_address=*
+
+# MatchMaker driver. (string value)
+#rpc_zmq_matchmaker=oslo.messaging._drivers.matchmaker.MatchMakerLocalhost
+
+# ZeroMQ receiver listening port. (integer value)
+#rpc_zmq_port=9501
+
+# Number of ZeroMQ contexts, defaults to 1. (integer value)
+#rpc_zmq_contexts=1
+
+# Maximum number of ingress messages to locally buffer per
+# topic. Default is unlimited. (integer value)
+#rpc_zmq_topic_backlog=<None>
+
+# Directory for holding IPC sockets. (string value)
+#rpc_zmq_ipc_dir=/var/run/openstack
+
+# Name of this node. Must be a valid hostname, FQDN, or IP
+# address. Must match "host" option, if running Nova. (string
+# value)
+#rpc_zmq_host=heat
+
+# Seconds to wait before a cast expires (TTL). Only supported
+# by impl_zmq. (integer value)
+#rpc_cast_timeout=30
+
+# Heartbeat frequency. (integer value)
+#matchmaker_heartbeat_freq=300
+
+# Heartbeat time-to-live. (integer value)
+#matchmaker_heartbeat_ttl=600
+
+# Size of RPC greenthread pool. (integer value)
+#rpc_thread_pool_size=64
+
+# Driver or drivers to handle sending notifications. (multi
+# valued)
+{%- if server.notification %}
+notification_driver=oslo.messaging.notifier.Notifier
+{%- endif %}
+# AMQP topic used for OpenStack notifications. (list value)
+# Deprecated group/name - [rpc_notifier2]/topics
+#notification_topics=notifications
+
+# Seconds to wait for a response from a call. (integer value)
+#rpc_response_timeout=60
+
+# A URL representing the messaging driver to use and its full
+# configuration. If not set, we fall back to the rpc_backend
+# option and driver specific configuration. (string value)
+#transport_url=<None>
+
+# The messaging driver to use, defaults to rabbit. Other
+# drivers include qpid and zmq. (string value)
+#rpc_backend=rabbit
+
+# The default exchange under which topics are scoped. May be
+# overridden by an exchange name specified in the
+# transport_url option. (string value)
+#control_exchange=openstack
+
+
+#
+# Options defined in heat.api.middleware.ssl
+#
+
+# The HTTP Header that will be used to determine which the
+# original request protocol scheme was, even if it was removed
+# by an SSL terminator proxy. (string value)
+#secure_proxy_ssl_header=X-Forwarded-Proto
+
+
+#
+# Options defined in heat.common.crypt
+#
+
+# Encryption key used for authentication info in database.
+# (string value)
+#auth_encryption_key=notgood but just long enough i think
+
+
+#
+# Options defined in heat.common.heat_keystoneclient
+#
+
+# Fully qualified class name to use as a keystone backend.
+# (string value)
+#keystone_backend=heat.common.heat_keystoneclient.KeystoneClientV3
+
+
+#
+# Options defined in heat.engine.clients
+#
+
+# Fully qualified class name to use as a client backend.
+# (string value)
+#cloud_backend=heat.engine.clients.OpenStackClients
+
+
+#
+# Options defined in heat.engine.notification
+#
+
+# Default notification level for outgoing notifications.
+# (string value)
+#default_notification_level=INFO
+
+# Default publisher_id for outgoing notifications. (string
+# value)
+#default_publisher_id=<None>
+
+# List of drivers to send notifications (DEPRECATED). (multi
+# valued)
+#list_notifier_drivers=<None>
+
+
+#
+# Options defined in heat.engine.resources.loadbalancer
+#
+
+# Custom template for the built-in loadbalancer nested stack.
+# (string value)
+#loadbalancer_template=<None>
+
+
+#
+# Options defined in heat.openstack.common.eventlet_backdoor
+#
+
+# Enable eventlet backdoor. Acceptable values are 0, <port>,
+# and <start>:<end>, where 0 results in listening on a random
+# tcp port number; <port> results in listening on the
+# specified port number (and not enabling backdoor if that
+# port is in use); and <start>:<end> results in listening on
+# the smallest unused port number within the specified range
+# of port numbers. The chosen port is displayed in the
+# service's log file. (string value)
+#backdoor_port=<None>
+
+
+#
+# Options defined in heat.openstack.common.lockutils
+#
+
+# Enables or disables inter-process locks. (boolean value)
+#disable_process_locking=false
+
+# Directory to use for lock files. (string value)
+#lock_path=<None>
+
+
+#
+# Options defined in heat.openstack.common.log
+#
+
+# Print debugging output (set logging level to DEBUG instead
+# of default WARNING level). (boolean value)
+#debug=false
+
+# Print more verbose output (set logging level to INFO instead
+# of default WARNING level). (boolean value)
+verbose=True
+
+# Log output to standard error. (boolean value)
+#use_stderr=true
+
+# Format string to use for log messages with context. (string
+# value)
+#logging_context_format_string=%(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
+
+# Format string to use for log messages without context.
+# (string value)
+#logging_default_format_string=%(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
+
+# Data to append to log format when level is DEBUG. (string
+# value)
+#logging_debug_format_suffix=%(funcName)s %(pathname)s:%(lineno)d
+
+# Prefix each line of exception output with this format.
+# (string value)
+#logging_exception_prefix=%(asctime)s.%(msecs)03d %(process)d TRACE %(name)s %(instance)s
+
+# List of logger=LEVEL pairs. (list value)
+#default_log_levels=amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN
+
+# Enables or disables publication of error events. (boolean
+# value)
+#publish_errors=false
+
+# Enables or disables fatal status of deprecations. (boolean
+# value)
+#fatal_deprecations=false
+
+# The format for an instance that is passed with the log
+# message. (string value)
+#instance_format="[instance: %(uuid)s] "
+
+# The format for an instance UUID that is passed with the log
+# message. (string value)
+#instance_uuid_format="[instance: %(uuid)s] "
+
+# The name of a logging configuration file. This file is
+# appended to any existing logging configuration files. For
+# details about logging configuration files, see the Python
+# logging module documentation. (string value)
+# Deprecated group/name - [DEFAULT]/log_config
+#log_config_append=<None>
+
+# DEPRECATED. A logging.Formatter log message format string
+# which may use any of the available logging.LogRecord
+# attributes. This option is deprecated. Please use
+# logging_context_format_string and
+# logging_default_format_string instead. (string value)
+#log_format=<None>
+
+# Format string for %%(asctime)s in log records. Default:
+# %(default)s . (string value)
+#log_date_format=%Y-%m-%d %H:%M:%S
+
+# (Optional) Name of log file to output to. If no default is
+# set, logging will go to stdout. (string value)
+# Deprecated group/name - [DEFAULT]/logfile
+log_file=/var/log/heat/heat.log
+
+# (Optional) The base directory used for relative --log-file
+# paths. (string value)
+# Deprecated group/name - [DEFAULT]/logdir
+#log_dir=<None>
+
+# Use syslog for logging. Existing syslog format is DEPRECATED
+# during I, and will change in J to honor RFC5424. (boolean
+# value)
+#use_syslog=false
+
+# (Optional) Enables or disables syslog rfc5424 format for
+# logging. If enabled, prefixes the MSG part of the syslog
+# message with APP-NAME (RFC5424). The format without the APP-
+# NAME is deprecated in I, and will be removed in J. (boolean
+# value)
+#use_syslog_rfc_format=false
+
+# Syslog facility to receive log lines. (string value)
+#syslog_log_facility=LOG_USER
+
+
+#
+# Options defined in heat.openstack.common.policy
+#
+
+# The JSON file that defines policies. (string value)
+#policy_file=policy.json
+
+# Default rule. Enforced when a requested rule is not found.
+# (string value)
+#policy_default_rule=default
+
+
+[auth_password]
+
+#
+# Options defined in heat.common.config
+#
+
+# Allow orchestration of multiple clouds. (boolean value)
+#multi_cloud=false
+
+# Allowed keystone endpoints for auth_uri when multi_cloud is
+# enabled. At least one endpoint needs to be specified. (list
+# value)
+#allowed_auth_uris=
+
+
+[clients]
+
+#
+# Options defined in heat.common.config
+#
+
+# Type of endpoint in Identity service catalog to use for
+# communication with the OpenStack service. (string value)
+#endpoint_type=publicURL
+
+# Optional CA cert file to use in SSL connections. (string
+# value)
+#ca_file=<None>
+
+# Optional PEM-formatted certificate chain file. (string
+# value)
+#cert_file=<None>
+
+# Optional PEM-formatted file that contains the private key.
+# (string value)
+#key_file=<None>
+
+# If set, then the server's certificate will not be verified.
+# (boolean value)
+#insecure=false
+
+
+[clients_ceilometer]
+
+#
+# Options defined in heat.common.config
+#
+
+# Type of endpoint in Identity service catalog to use for
+# communication with the OpenStack service. (string value)
+#endpoint_type=<None>
+
+# Optional CA cert file to use in SSL connections. (string
+# value)
+#ca_file=<None>
+
+# Optional PEM-formatted certificate chain file. (string
+# value)
+#cert_file=<None>
+
+# Optional PEM-formatted file that contains the private key.
+# (string value)
+#key_file=<None>
+
+# If set, then the server's certificate will not be verified.
+# (boolean value)
+#insecure=<None>
+
+
+[clients_cinder]
+
+#
+# Options defined in heat.common.config
+#
+
+# Type of endpoint in Identity service catalog to use for
+# communication with the OpenStack service. (string value)
+#endpoint_type=<None>
+
+# Optional CA cert file to use in SSL connections. (string
+# value)
+#ca_file=<None>
+
+# Optional PEM-formatted certificate chain file. (string
+# value)
+#cert_file=<None>
+
+# Optional PEM-formatted file that contains the private key.
+# (string value)
+#key_file=<None>
+
+# If set, then the server's certificate will not be verified.
+# (boolean value)
+#insecure=<None>
+
+
+#
+# Options defined in heat.common.config
+#
+
+# Allow client's debug log output. (boolean value)
+#http_log_debug=false
+
+
+[clients_glance]
+
+#
+# Options defined in heat.common.config
+#
+
+# Type of endpoint in Identity service catalog to use for
+# communication with the OpenStack service. (string value)
+#endpoint_type=<None>
+
+# Optional CA cert file to use in SSL connections. (string
+# value)
+#ca_file=<None>
+
+# Optional PEM-formatted certificate chain file. (string
+# value)
+#cert_file=<None>
+
+# Optional PEM-formatted file that contains the private key.
+# (string value)
+#key_file=<None>
+
+# If set, then the server's certificate will not be verified.
+# (boolean value)
+#insecure=<None>
+
+
+[clients_heat]
+
+#
+# Options defined in heat.common.config
+#
+
+# Type of endpoint in Identity service catalog to use for
+# communication with the OpenStack service. (string value)
+#endpoint_type=<None>
+
+# Optional CA cert file to use in SSL connections. (string
+# value)
+#ca_file=<None>
+
+# Optional PEM-formatted certificate chain file. (string
+# value)
+#cert_file=<None>
+
+# Optional PEM-formatted file that contains the private key.
+# (string value)
+#key_file=<None>
+
+# If set, then the server's certificate will not be verified.
+# (boolean value)
+#insecure=<None>
+
+
+#
+# Options defined in heat.common.config
+#
+
+# Optional heat url in format like
+# http://0.0.0.0:8004/v1/%(tenant_id)s. (string value)
+#url=
+
+
+[clients_keystone]
+
+#
+# Options defined in heat.common.config
+#
+
+# Type of endpoint in Identity service catalog to use for
+# communication with the OpenStack service. (string value)
+#endpoint_type=<None>
+
+# Optional CA cert file to use in SSL connections. (string
+# value)
+#ca_file=<None>
+
+# Optional PEM-formatted certificate chain file. (string
+# value)
+#cert_file=<None>
+
+# Optional PEM-formatted file that contains the private key.
+# (string value)
+#key_file=<None>
+
+# If set, then the server's certificate will not be verified.
+# (boolean value)
+#insecure=<None>
+
+
+[clients_neutron]
+
+#
+# Options defined in heat.common.config
+#
+
+# Type of endpoint in Identity service catalog to use for
+# communication with the OpenStack service. (string value)
+#endpoint_type=<None>
+
+# Optional CA cert file to use in SSL connections. (string
+# value)
+#ca_file=<None>
+
+# Optional PEM-formatted certificate chain file. (string
+# value)
+#cert_file=<None>
+
+# Optional PEM-formatted file that contains the private key.
+# (string value)
+#key_file=<None>
+
+# If set, then the server's certificate will not be verified.
+# (boolean value)
+#insecure=<None>
+
+
+[clients_nova]
+
+#
+# Options defined in heat.common.config
+#
+
+# Type of endpoint in Identity service catalog to use for
+# communication with the OpenStack service. (string value)
+#endpoint_type=<None>
+
+# Optional CA cert file to use in SSL connections. (string
+# value)
+#ca_file=<None>
+
+# Optional PEM-formatted certificate chain file. (string
+# value)
+#cert_file=<None>
+
+# Optional PEM-formatted file that contains the private key.
+# (string value)
+#key_file=<None>
+
+# If set, then the server's certificate will not be verified.
+# (boolean value)
+#insecure=<None>
+
+
+#
+# Options defined in heat.common.config
+#
+
+# Allow client's debug log output. (boolean value)
+#http_log_debug=false
+
+
+[clients_swift]
+
+#
+# Options defined in heat.common.config
+#
+
+# Type of endpoint in Identity service catalog to use for
+# communication with the OpenStack service. (string value)
+#endpoint_type=<None>
+
+# Optional CA cert file to use in SSL connections. (string
+# value)
+#ca_file=<None>
+
+# Optional PEM-formatted certificate chain file. (string
+# value)
+#cert_file=<None>
+
+# Optional PEM-formatted file that contains the private key.
+# (string value)
+#key_file=<None>
+
+# If set, then the server's certificate will not be verified.
+# (boolean value)
+#insecure=<None>
+
+
+[clients_trove]
+
+#
+# Options defined in heat.common.config
+#
+
+# Type of endpoint in Identity service catalog to use for
+# communication with the OpenStack service. (string value)
+#endpoint_type=<None>
+
+# Optional CA cert file to use in SSL connections. (string
+# value)
+#ca_file=<None>
+
+# Optional PEM-formatted certificate chain file. (string
+# value)
+#cert_file=<None>
+
+# Optional PEM-formatted file that contains the private key.
+# (string value)
+#key_file=<None>
+
+# If set, then the server's certificate will not be verified.
+# (boolean value)
+#insecure=<None>
+
+
+[database]
+
+#
+# Options defined in oslo.db
+#
+
+# The file name to use with SQLite. (string value)
+#sqlite_db=oslo.sqlite
+
+# If True, SQLite uses synchronous mode. (boolean value)
+#sqlite_synchronous=true
+
+# The back end to use for the database. (string value)
+# Deprecated group/name - [DEFAULT]/db_backend
+#backend=sqlalchemy
+
+# The SQLAlchemy connection string to use to connect to the
+# database. (string value)
+# Deprecated group/name - [DEFAULT]/sql_connection
+# Deprecated group/name - [DATABASE]/sql_connection
+# Deprecated group/name - [sql]/connection
+connection = {{ server.database.engine }}://{{ server.database.user }}:{{ server.database.password }}@{{ server.database.host }}/{{ server.database.name }}
+
+# The SQLAlchemy connection string to use to connect to the
+# slave database. (string value)
+#slave_connection=<None>
+
+# The SQL mode to be used for MySQL sessions. This option,
+# including the default, overrides any server-set SQL mode. To
+# use whatever SQL mode is set by the server configuration,
+# set this to no value. Example: mysql_sql_mode= (string
+# value)
+#mysql_sql_mode=TRADITIONAL
+
+# Timeout before idle SQL connections are reaped. (integer
+# value)
+# Deprecated group/name - [DEFAULT]/sql_idle_timeout
+# Deprecated group/name - [DATABASE]/sql_idle_timeout
+# Deprecated group/name - [sql]/idle_timeout
+#idle_timeout=3600
+
+# Minimum number of SQL connections to keep open in a pool.
+# (integer value)
+# Deprecated group/name - [DEFAULT]/sql_min_pool_size
+# Deprecated group/name - [DATABASE]/sql_min_pool_size
+#min_pool_size=1
+
+# Maximum number of SQL connections to keep open in a pool.
+# (integer value)
+# Deprecated group/name - [DEFAULT]/sql_max_pool_size
+# Deprecated group/name - [DATABASE]/sql_max_pool_size
+#max_pool_size=<None>
+
+# Maximum number of database connection retries during
+# startup. Set to -1 to specify an infinite retry count.
+# (integer value)
+# Deprecated group/name - [DEFAULT]/sql_max_retries
+# Deprecated group/name - [DATABASE]/sql_max_retries
+#max_retries=10
+
+# Interval between retries of opening a SQL connection.
+# (integer value)
+# Deprecated group/name - [DEFAULT]/sql_retry_interval
+# Deprecated group/name - [DATABASE]/reconnect_interval
+#retry_interval=10
+
+# If set, use this value for max_overflow with SQLAlchemy.
+# (integer value)
+# Deprecated group/name - [DEFAULT]/sql_max_overflow
+# Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
+#max_overflow=<None>
+
+# Verbosity of SQL debugging information: 0=None,
+# 100=Everything. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_connection_debug
+#connection_debug=0
+
+# Add Python stack traces to SQL as comment strings. (boolean
+# value)
+# Deprecated group/name - [DEFAULT]/sql_connection_trace
+#connection_trace=false
+
+# If set, use this value for pool_timeout with SQLAlchemy.
+# (integer value)
+# Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
+#pool_timeout=<None>
+
+# Enable the experimental use of database reconnect on
+# connection lost. (boolean value)
+#use_db_reconnect=false
+
+# Seconds between database connection retries. (integer value)
+#db_retry_interval=1
+
+# If True, increases the interval between database connection
+# retries up to db_max_retry_interval. (boolean value)
+#db_inc_retry_interval=true
+
+# If db_inc_retry_interval is set, the maximum seconds between
+# database connection retries. (integer value)
+#db_max_retry_interval=10
+
+# Maximum database connection retries before error is raised.
+# Set to -1 to specify an infinite retry count. (integer
+# value)
+#db_max_retries=20
+
+
+[ec2authtoken]
+
+#
+# Options defined in heat.api.aws.ec2token
+#
+
+# Authentication Endpoint URI. (string value)
+auth_uri=http://{{ server.identity.host }}:5000/v2.0
+
+# Allow orchestration of multiple clouds. (boolean value)
+#multi_cloud=false
+
+# Allowed keystone endpoints for auth_uri when multi_cloud is
+# enabled. At least one endpoint needs to be specified. (list
+# value)
+#allowed_auth_uris=
+
+keystone_ec2_uri=http://{{ server.identity.host }}:5000/v2.0/ec2tokens
+
+[heat_api]
+
+#
+# Options defined in heat.common.wsgi
+#
+
+# Address to bind the server. Useful when selecting a
+# particular network interface. (string value)
+bind_host={{ server.bind.api.address }}
+
+# The port on which the server will listen. (integer value)
+#bind_port=8004
+
+# Number of backlog requests to configure the socket with.
+# (integer value)
+#backlog=4096
+
+# Location of the SSL certificate file to use for SSL mode.
+# (string value)
+#cert_file=<None>
+
+# Location of the SSL key file to use for enabling SSL mode.
+# (string value)
+#key_file=<None>
+
+# Number of workers for Heat service. (integer value)
+#workers=0
+
+# Maximum line size of message headers to be accepted.
+# max_header_line may need to be increased when using large
+# tokens (typically those generated by the Keystone v3 API
+# with big service catalogs). (integer value)
+#max_header_line=16384
+
+
+[heat_api_cfn]
+
+#
+# Options defined in heat.common.wsgi
+#
+
+# Address to bind the server. Useful when selecting a
+# particular network interface. (string value)
+bind_host={{ server.bind.api_cfn.address }}
+
+# The port on which the server will listen. (integer value)
+#bind_port=8000
+
+# Number of backlog requests to configure the socket with.
+# (integer value)
+#backlog=4096
+
+# Location of the SSL certificate file to use for SSL mode.
+# (string value)
+#cert_file=<None>
+
+# Location of the SSL key file to use for enabling SSL mode.
+# (string value)
+#key_file=<None>
+
+# Number of workers for Heat service. (integer value)
+#workers=0
+
+# Maximum line size of message headers to be accepted.
+# max_header_line may need to be increased when using large
+# tokens (typically those generated by the Keystone v3 API
+# with big service catalogs). (integer value)
+#max_header_line=16384
+
+
+[heat_api_cloudwatch]
+
+#
+# Options defined in heat.common.wsgi
+#
+
+# Address to bind the server. Useful when selecting a
+# particular network interface. (string value)
+bind_host={{ server.bind.api_cloudwatch.address }}
+
+# The port on which the server will listen. (integer value)
+#bind_port=8003
+
+# Number of backlog requests to configure the socket with.
+# (integer value)
+#backlog=4096
+
+# Location of the SSL certificate file to use for SSL mode.
+# (string value)
+#cert_file=<None>
+
+# Location of the SSL key file to use for enabling SSL mode.
+# (string value)
+#key_file=<None>
+
+# Number of workers for Heat service. (integer value)
+#workers=0
+
+# Maximum line size of message headers to be accepted.
+# max_header_line may need to be increased when using large
+# tokens (typically those generated by the Keystone v3 API
+# with big service catalogs.) (integer value)
+#max_header_line=16384
+
+
+[keystone_authtoken]
+
+#
+# Options defined in keystonemiddleware.auth_token
+#
+
+# Prefix to prepend at the beginning of the path. Deprecated,
+# use identity_uri. (string value)
+#auth_admin_prefix=
+
+# Host providing the admin Identity API endpoint. Deprecated,
+# use identity_uri. (string value)
+auth_host = {{ server.identity.host }}
+
+# Port of the admin Identity API endpoint. Deprecated, use
+# identity_uri. (integer value)
+auth_port = 35357
+
+# Protocol of the admin Identity API endpoint (http or https).
+# Deprecated, use identity_uri. (string value)
+auth_protocol=http
+
+# Complete public Identity API endpoint (string value)
+auth_uri=http://{{ server.identity.host }}:5000/v3
+
+# Complete admin Identity API endpoint. This should specify
+# the unversioned root endpoint e.g. https://localhost:35357/
+# (string value)
+identity_uri=http://{{ server.identity.host }}:35357/
+
+# API version of the admin Identity API endpoint (string
+# value)
+#auth_version=<None>
+auth_version=v3.0
+
+# Do not handle authorization requests within the middleware,
+# but delegate the authorization decision to downstream WSGI
+# components (boolean value)
+#delay_auth_decision=false
+
+# Request timeout value for communicating with Identity API
+# server. (boolean value)
+#http_connect_timeout=<None>
+
+# How many times are we trying to reconnect when communicating
+# with Identity API Server. (integer value)
+#http_request_max_retries=3
+
+# This option is deprecated and may be removed in a future
+# release. Single shared secret with the Keystone
+# configuration used for bootstrapping a Keystone
+# installation, or otherwise bypassing the normal
+# authentication process. This option should not be used, use
+# `admin_user` and `admin_password` instead. (string value)
+#admin_token=<None>
+
+# Keystone account username (string value)
+admin_user = {{ server.identity.user }}
+
+# Keystone account password (string value)
+admin_password = {{ server.identity.password }}
+
+# Keystone service account tenant name to validate user tokens
+# (string value)
+admin_tenant_name = {{ server.identity.tenant }}
+
+# Env key for the swift cache (string value)
+#cache=<None>
+
+# Required if Keystone server requires client certificate
+# (string value)
+#certfile=<None>
+
+# Required if Keystone server requires client certificate
+# (string value)
+#keyfile=<None>
+
+# A PEM encoded Certificate Authority to use when verifying
+# HTTPs connections. Defaults to system CAs. (string value)
+#cafile=<None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure=false
+
+# Directory used to cache files related to PKI tokens (string
+# value)
+#signing_dir=<None>
+
+# Optionally specify a list of memcached server(s) to use for
+# caching. If left undefined, tokens will instead be cached
+# in-process. (list value)
+# Deprecated group/name - [DEFAULT]/memcache_servers
+#memcached_servers=<None>
+
+# In order to prevent excessive effort spent validating
+# tokens, the middleware caches previously-seen tokens for a
+# configurable duration (in seconds). Set to -1 to disable
+# caching completely. (integer value)
+#token_cache_time=300
+
+# Determines the frequency at which the list of revoked tokens
+# is retrieved from the Identity service (in seconds). A high
+# number of revocation events combined with a low cache
+# duration may significantly reduce performance. (integer
+# value)
+#revocation_cache_time=10
+
+# (optional) if defined, indicate whether token data should be
+# authenticated or authenticated and encrypted. Acceptable
+# values are MAC or ENCRYPT. If MAC, token data is
+# authenticated (with HMAC) in the cache. If ENCRYPT, token
+# data is encrypted and authenticated in the cache. If the
+# value is not one of these options or empty, auth_token will
+# raise an exception on initialization. (string value)
+#memcache_security_strategy=<None>
+
+# (optional, mandatory if memcache_security_strategy is
+# defined) this string is used for key derivation. (string
+# value)
+#memcache_secret_key=<None>
+
+# (optional) number of seconds memcached server is considered
+# dead before it is tried again. (integer value)
+#memcache_pool_dead_retry=300
+
+# (optional) max total number of open connections to every
+# memcached server. (integer value)
+#memcache_pool_maxsize=10
+
+# (optional) socket timeout in seconds for communicating with
+# a memcache server. (integer value)
+#memcache_pool_socket_timeout=3
+
+# (optional) number of seconds a connection to memcached is
+# held unused in the pool before it is closed. (integer value)
+#memcache_pool_unused_timeout=60
+
+# (optional) number of seconds that an operation will wait to
+# get a memcache client connection from the pool. (integer
+# value)
+#memcache_pool_conn_get_timeout=10
+
+# (optional) use the advanced (eventlet safe) memcache client
+# pool. The advanced pool will only work under python 2.x.
+# (boolean value)
+#memcache_use_advanced_pool=false
+
+# (optional) indicate whether to set the X-Service-Catalog
+# header. If False, middleware will not ask for service
+# catalog on token validation and will not set the X-Service-
+# Catalog header. (boolean value)
+#include_service_catalog=true
+
+# Used to control the use and type of token binding. Can be
+# set to: "disabled" to not check token binding. "permissive"
+# (default) to validate binding information if the bind type
+# is of a form known to the server and ignore it if not.
+# "strict" like "permissive" but if the bind type is unknown
+# the token will be rejected. "required" any form of token
+# binding is needed to be allowed. Finally the name of a
+# binding method that must be present in tokens. (string
+# value)
+#enforce_token_bind=permissive
+
+# If true, the revocation list will be checked for cached
+# tokens. This requires that PKI tokens are configured on the
+# Keystone server. (boolean value)
+#check_revocations_for_cached=false
+
+# Hash algorithms to use for hashing PKI tokens. This may be a
+# single algorithm or multiple. The algorithms are those
+# supported by Python standard hashlib.new(). The hashes will
+# be tried in the order given, so put the preferred one first
+# for performance. The result of the first hash will be stored
+# in the cache. This will typically be set to multiple values
+# only while migrating from a less secure algorithm to a more
+# secure one. Once all the old tokens are expired this option
+# should be set to a single value for better performance.
+# (list value)
+#hash_algorithms=md5
+
+
+[matchmaker_redis]
+
+#
+# Options defined in oslo.messaging
+#
+
+# Host to locate redis. (string value)
+#host=127.0.0.1
+
+# Use this port to connect to redis host. (integer value)
+#port=6379
+
+# Password for Redis server (optional). (string value)
+#password=<None>
+
+
+[matchmaker_ring]
+
+#
+# Options defined in oslo.messaging
+#
+
+# Matchmaker ring file (JSON). (string value)
+# Deprecated group/name - [DEFAULT]/matchmaker_ringfile
+#ringfile=/etc/oslo/matchmaker_ring.json
+
+
+[oslo_messaging_amqp]
+
+#
+# Options defined in oslo.messaging
+#
+# NOTE: Options in this group are supported when using oslo.messaging >=1.5.0.
+
+# address prefix used when sending to a specific server
+# (string value)
+#server_request_prefix=exclusive
+
+# address prefix used when broadcasting to all servers (string
+# value)
+#broadcast_prefix=broadcast
+
+# address prefix when sending to any server in group (string
+# value)
+#group_request_prefix=unicast
+
+# Name for the AMQP container (string value)
+#container_name=<None>
+
+# Timeout for inactive connections (in seconds) (integer
+# value)
+#idle_timeout=0
+
+# Debug: dump AMQP frames to stdout (boolean value)
+#trace=false
+
+# CA certificate PEM file for verifing server certificate
+# (string value)
+#ssl_ca_file=
+
+# Identifying certificate PEM file to present to clients
+# (string value)
+#ssl_cert_file=
+
+# Private key PEM file used to sign cert_file certificate
+# (string value)
+#ssl_key_file=
+
+# Password for decrypting ssl_key_file (if encrypted) (string
+# value)
+#ssl_key_password=<None>
+
+# Accept clients using either SSL or plain TCP (boolean value)
+#allow_insecure_clients=false
+
+
+[paste_deploy]
+
+#
+# Options defined in heat.common.config
+#
+
+# The flavor to use. (string value)
+#flavor=<None>
+
+# The API paste config file to use. (string value)
+#api_paste_config=api-paste.ini
+
+
+[revision]
+
+#
+# Options defined in heat.common.config
+#
+
+# Heat build revision. If you would prefer to manage your
+# build revision separately, you can move this section to a
+# different file and add it as another config option. (string
+# value)
+#heat_revision=unknown
diff --git a/heat/files/juno/heat.conf.RedHat b/heat/files/juno/heat.conf.RedHat
new file mode 120000
index 0000000..08e351a
--- /dev/null
+++ b/heat/files/juno/heat.conf.RedHat
@@ -0,0 +1 @@
+heat.conf.Debian
\ No newline at end of file
diff --git a/heat/files/kilo/api-paste.ini b/heat/files/kilo/api-paste.ini
new file mode 100644
index 0000000..a0b48fe
--- /dev/null
+++ b/heat/files/kilo/api-paste.ini
@@ -0,0 +1,104 @@
+
+# heat-api pipeline
+[pipeline:heat-api]
+pipeline = request_id faultwrap ssl versionnegotiation osprofiler authurl authtoken context apiv1app
+
+# heat-api pipeline for standalone heat
+# ie. uses alternative auth backend that authenticates users against keystone
+# using username and password instead of validating token (which requires
+# an admin/service token).
+# To enable, in heat.conf:
+# [paste_deploy]
+# flavor = standalone
+#
+[pipeline:heat-api-standalone]
+pipeline = request_id faultwrap ssl versionnegotiation authurl authpassword context apiv1app
+
+# heat-api pipeline for custom cloud backends
+# i.e. in heat.conf:
+# [paste_deploy]
+# flavor = custombackend
+#
+[pipeline:heat-api-custombackend]
+pipeline = request_id faultwrap versionnegotiation context custombackendauth apiv1app
+
+# heat-api-cfn pipeline
+[pipeline:heat-api-cfn]
+pipeline = cfnversionnegotiation osprofiler ec2authtoken authtoken context apicfnv1app
+
+# heat-api-cfn pipeline for standalone heat
+# relies exclusively on authenticating with ec2 signed requests
+[pipeline:heat-api-cfn-standalone]
+pipeline = cfnversionnegotiation ec2authtoken context apicfnv1app
+
+# heat-api-cloudwatch pipeline
+[pipeline:heat-api-cloudwatch]
+pipeline = versionnegotiation osprofiler ec2authtoken authtoken context apicwapp
+
+# heat-api-cloudwatch pipeline for standalone heat
+# relies exclusively on authenticating with ec2 signed requests
+[pipeline:heat-api-cloudwatch-standalone]
+pipeline = versionnegotiation ec2authtoken context apicwapp
+
+[app:apiv1app]
+paste.app_factory = heat.common.wsgi:app_factory
+heat.app_factory = heat.api.openstack.v1:API
+
+[app:apicfnv1app]
+paste.app_factory = heat.common.wsgi:app_factory
+heat.app_factory = heat.api.cfn.v1:API
+
+[app:apicwapp]
+paste.app_factory = heat.common.wsgi:app_factory
+heat.app_factory = heat.api.cloudwatch:API
+
+[filter:versionnegotiation]
+paste.filter_factory = heat.common.wsgi:filter_factory
+heat.filter_factory = heat.api.openstack:version_negotiation_filter
+
+[filter:faultwrap]
+paste.filter_factory = heat.common.wsgi:filter_factory
+heat.filter_factory = heat.api.openstack:faultwrap_filter
+
+[filter:cfnversionnegotiation]
+paste.filter_factory = heat.common.wsgi:filter_factory
+heat.filter_factory = heat.api.cfn:version_negotiation_filter
+
+[filter:cwversionnegotiation]
+paste.filter_factory = heat.common.wsgi:filter_factory
+heat.filter_factory = heat.api.cloudwatch:version_negotiation_filter
+
+[filter:context]
+paste.filter_factory = heat.common.context:ContextMiddleware_filter_factory
+
+[filter:ec2authtoken]
+paste.filter_factory = heat.api.aws.ec2token:EC2Token_filter_factory
+
+[filter:ssl]
+paste.filter_factory = heat.common.wsgi:filter_factory
+heat.filter_factory = heat.api.openstack:sslmiddleware_filter
+
+# Middleware to set auth_url header appropriately
+[filter:authurl]
+paste.filter_factory = heat.common.auth_url:filter_factory
+
+# Auth middleware that validates token against keystone
+[filter:authtoken]
+paste.filter_factory = keystonemiddleware.auth_token:filter_factory
+
+# Auth middleware that validates username/password against keystone
+[filter:authpassword]
+paste.filter_factory = heat.common.auth_password:filter_factory
+
+# Auth middleware that validates against custom backend
+[filter:custombackendauth]
+paste.filter_factory = heat.common.custom_backend_auth:filter_factory
+
+# Middleware to set x-openstack-request-id in http response header
+[filter:request_id]
+paste.filter_factory = oslo.middleware.request_id:RequestId.factory
+
+[filter:osprofiler]
+paste.filter_factory = osprofiler.web:WsgiMiddleware.factory
+hmac_keys = SECRET_KEY
+enabled = yes
diff --git a/heat/files/kilo/heat.conf.Debian b/heat/files/kilo/heat.conf.Debian
new file mode 100644
index 0000000..6fab1b7
--- /dev/null
+++ b/heat/files/kilo/heat.conf.Debian
@@ -0,0 +1,922 @@
+{%- from "heat/map.jinja" import server with context %}
+[DEFAULT]
+
+#
+# From oslo.log
+#
+
+region_name_for_services={{ server.region }}
+
+# Print debugging output (set logging level to DEBUG instead of default WARNING
+# level). (boolean value)
+#debug = false
+
+# Print more verbose output (set logging level to INFO instead of default
+# WARNING level). (boolean value)
+#verbose = false
+verbose = true
+
+# The name of a logging configuration file. This file is appended to any
+# existing logging configuration files. For details about logging configuration
+# files, see the Python logging module documentation. (string value)
+# Deprecated group/name - [DEFAULT]/log_config
+#log_config_append = <None>
+
+# DEPRECATED. A logging.Formatter log message format string which may use any
+# of the available logging.LogRecord attributes. This option is deprecated.
+# Please use logging_context_format_string and logging_default_format_string
+# instead. (string value)
+#log_format = <None>
+heat_metadata_server_url=http://{{ server.metadata.host }}:{{ server.metadata.port }}
+
+# URL of the Heat waitcondition server. (string value)
+heat_waitcondition_server_url=http://{{ server.waitcondition.host }}:{{ server.waitcondition.port }}/v1/waitcondition
+
+# URL of the Heat CloudWatch server. (string value)
+heat_watch_server_url=http://{{ server.watch.host }}:{{ server.watch.port }}
+# Format string for %%(asctime)s in log records. Default: %(default)s . (string
+# value)
+#log_date_format = %Y-%m-%d %H:%M:%S
+
+# (Optional) Name of log file to output to. If no default is set, logging will
+# go to stdout. (string value)
+# Deprecated group/name - [DEFAULT]/logfile
+#log_file = <None>
+log_file=/var/log/heat/heat.log
+
+# (Optional) The base directory used for relative --log-file paths. (string
+# value)
+# Deprecated group/name - [DEFAULT]/logdir
+#log_dir = <None>
+
+# Use syslog for logging. Existing syslog format is DEPRECATED during I, and
+# will change in J to honor RFC5424. (boolean value)
+#use_syslog = false
+
+workers=4
+
+{%- if server.stack_domain_admin is defined %}
+
+# Keystone username, a user with roles sufficient to manage
+# users and projects in the stack_user_domain. (string value)
+stack_domain_admin = heat_domain_admin
+
+# Keystone password for stack_domain_admin user. (string
+# value)
+stack_domain_admin_password={{ server.stack_domain_admin.password }}
+
+stack_user_domain_name = heat_user_domain
+
+{%- else %}
+
+# Keystone username, a user with roles sufficient to manage
+# users and projects in the stack_user_domain. (string value)
+#stack_domain_admin=<None>
+
+# Keystone password for stack_domain_admin user. (string
+# value)
+#stack_domain_admin_password=<None>
+
+{%- endif %}
+
+# (Optional) Enables or disables syslog rfc5424 format for logging. If enabled,
+# prefixes the MSG part of the syslog message with APP-NAME (RFC5424). The
+# format without the APP-NAME is deprecated in I, and will be removed in J.
+# (boolean value)
+#use_syslog_rfc_format = false
+
+# Syslog facility to receive log lines. (string value)
+#syslog_log_facility = LOG_USER
+
+# Log output to standard error. (boolean value)
+#use_stderr = true
+
+# Format string to use for log messages with context. (string value)
+#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
+
+# Format string to use for log messages without context. (string value)
+#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
+
+# Data to append to log format when level is DEBUG. (string value)
+#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
+
+# Prefix each line of exception output with this format. (string value)
+#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d TRACE %(name)s %(instance)s
+
+# List of logger=LEVEL pairs. (list value)
+#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN
+
+# Enables or disables publication of error events. (boolean value)
+#publish_errors = false
+
+# Enables or disables fatal status of deprecations. (boolean value)
+#fatal_deprecations = false
+
+# The format for an instance that is passed with the log message. (string
+# value)
+#instance_format = "[instance: %(uuid)s] "
+
+# The format for an instance UUID that is passed with the log message. (string
+# value)
+#instance_uuid_format = "[instance: %(uuid)s] "
+
+#
+# From oslo.messaging
+#
+
+# Size of RPC connection pool. (integer value)
+#rpc_conn_pool_size = 30
+
+# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
+# The "host" option should point or resolve to this address. (string value)
+#rpc_zmq_bind_address = *
+
+# MatchMaker driver. (string value)
+#rpc_zmq_matchmaker = local
+
+# ZeroMQ receiver listening port. (integer value)
+#rpc_zmq_port = 9501
+
+# Number of ZeroMQ contexts, defaults to 1. (integer value)
+#rpc_zmq_contexts = 1
+
+# Maximum number of ingress messages to locally buffer per topic. Default is
+# unlimited. (integer value)
+#rpc_zmq_topic_backlog = <None>
+
+# Directory for holding IPC sockets. (string value)
+#rpc_zmq_ipc_dir = /var/run/openstack
+
+# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
+# "host" option, if running Nova. (string value)
+#rpc_zmq_host = localhost
+
+# Seconds to wait before a cast expires (TTL). Only supported by impl_zmq.
+# (integer value)
+#rpc_cast_timeout = 30
+
+# Heartbeat frequency. (integer value)
+#matchmaker_heartbeat_freq = 300
+
+# Heartbeat time-to-live. (integer value)
+#matchmaker_heartbeat_ttl = 600
+
+# Size of RPC thread pool. (integer value)
+#rpc_thread_pool_size = 64
+
+# Driver or drivers to handle sending notifications. (multi valued)
+#notification_driver =
+notification_driver = oslo.messaging.notifier.Notifier
+
+# AMQP topic used for OpenStack notifications. (list value)
+# Deprecated group/name - [rpc_notifier2]/topics
+#notification_topics = notifications
+
+# Seconds to wait for a response from a call. (integer value)
+#rpc_response_timeout = 60
+
+# A URL representing the messaging driver to use and its full configuration. If
+# not set, we fall back to the rpc_backend option and driver specific
+# configuration. (string value)
+#transport_url = <None>
+
+# The messaging driver to use, defaults to rabbit. Other drivers include qpid
+# and zmq. (string value)
+#rpc_backend = rabbit
+rpc_backend = rabbit
+
+# The default exchange under which topics are scoped. May be overridden by an
+# exchange name specified in the transport_url option. (string value)
+#control_exchange = openstack
+
+[heat_api]
+
+#
+# Options defined in heat.common.wsgi
+#
+
+# Address to bind the server. Useful when selecting a
+# particular network interface. (string value)
+bind_host={{ server.bind.api.address }}
+
+# The port on which the server will listen. (integer value)
+#bind_port=8004
+
+# Number of backlog requests to configure the socket with.
+# (integer value)
+#backlog=4096
+
+# Location of the SSL certificate file to use for SSL mode.
+# (string value)
+#cert_file=<None>
+
+# Location of the SSL key file to use for enabling SSL mode.
+# (string value)
+#key_file=<None>
+
+# Number of workers for Heat service. (integer value)
+#workers=0
+
+# Maximum line size of message headers to be accepted.
+# max_header_line may need to be increased when using large
+# tokens (typically those generated by the Keystone v3 API
+# with big service catalogs). (integer value)
+#max_header_line=16384
+
+
+[heat_api_cfn]
+
+#
+# Options defined in heat.common.wsgi
+#
+
+# Address to bind the server. Useful when selecting a
+# particular network interface. (string value)
+bind_host={{ server.bind.api_cfn.address }}
+
+# The port on which the server will listen. (integer value)
+#bind_port=8000
+
+# Number of backlog requests to configure the socket with.
+# (integer value)
+#backlog=4096
+
+# Location of the SSL certificate file to use for SSL mode.
+# (string value)
+#cert_file=<None>
+
+# Location of the SSL key file to use for enabling SSL mode.
+# (string value)
+#key_file=<None>
+
+# Number of workers for Heat service. (integer value)
+#workers=0
+
+# Maximum line size of message headers to be accepted.
+# max_header_line may need to be increased when using large
+# tokens (typically those generated by the Keystone v3 API
+# with big service catalogs). (integer value)
+#max_header_line=16384
+
+
+[heat_api_cloudwatch]
+
+#
+# Options defined in heat.common.wsgi
+#
+
+# Address to bind the server. Useful when selecting a
+# particular network interface. (string value)
+bind_host={{ server.bind.api_cloudwatch.address }}
+
+# The port on which the server will listen. (integer value)
+#bind_port=8003
+
+# Number of backlog requests to configure the socket with.
+# (integer value)
+#backlog=4096
+
+# Location of the SSL certificate file to use for SSL mode.
+# (string value)
+#cert_file=<None>
+
+# Location of the SSL key file to use for enabling SSL mode.
+# (string value)
+#key_file=<None>
+
+# Number of workers for Heat service. (integer value)
+#workers=0
+
+# Maximum line size of message headers to be accepted.
+# max_header_line may need to be increased when using large
+# tokens (typically those generated by the Keystone v3 API
+# with big service catalogs.) (integer value)
+#max_header_line=16384
+
+
+[database]
+
+#
+# From oslo.db
+#
+
+# The file name to use with SQLite. (string value)
+# Deprecated group/name - [DEFAULT]/sqlite_db
+#sqlite_db = oslo.sqlite
+
+# If True, SQLite uses synchronous mode. (boolean value)
+# Deprecated group/name - [DEFAULT]/sqlite_synchronous
+#sqlite_synchronous = true
+
+# The back end to use for the database. (string value)
+# Deprecated group/name - [DEFAULT]/db_backend
+#backend = sqlalchemy
+
+# The SQLAlchemy connection string to use to connect to the database. (string
+# value)
+# Deprecated group/name - [DEFAULT]/sql_connection
+# Deprecated group/name - [DATABASE]/sql_connection
+# Deprecated group/name - [sql]/connection
+#connection = <None>
+connection = {{ server.database.engine }}://{{ server.database.user }}:{{ server.database.password }}@{{ server.database.host }}/{{ server.database.name }}
+
+# The SQLAlchemy connection string to use to connect to the slave database.
+# (string value)
+#slave_connection = <None>
+
+# The SQL mode to be used for MySQL sessions. This option, including the
+# default, overrides any server-set SQL mode. To use whatever SQL mode is set
+# by the server configuration, set this to no value. Example: mysql_sql_mode=
+# (string value)
+#mysql_sql_mode = TRADITIONAL
+
+# Timeout before idle SQL connections are reaped. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_idle_timeout
+# Deprecated group/name - [DATABASE]/sql_idle_timeout
+# Deprecated group/name - [sql]/idle_timeout
+#idle_timeout = 3600
+
+# Minimum number of SQL connections to keep open in a pool. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_min_pool_size
+# Deprecated group/name - [DATABASE]/sql_min_pool_size
+#min_pool_size = 1
+
+# Maximum number of SQL connections to keep open in a pool. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_max_pool_size
+# Deprecated group/name - [DATABASE]/sql_max_pool_size
+#max_pool_size = <None>
+
+# Maximum number of database connection retries during startup. Set to -1 to
+# specify an infinite retry count. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_max_retries
+# Deprecated group/name - [DATABASE]/sql_max_retries
+#max_retries = 10
+
+# Interval between retries of opening a SQL connection. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_retry_interval
+# Deprecated group/name - [DATABASE]/reconnect_interval
+#retry_interval = 10
+
+# If set, use this value for max_overflow with SQLAlchemy. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_max_overflow
+# Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
+#max_overflow = <None>
+
+# Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
+# value)
+# Deprecated group/name - [DEFAULT]/sql_connection_debug
+#connection_debug = 0
+
+# Add Python stack traces to SQL as comment strings. (boolean value)
+# Deprecated group/name - [DEFAULT]/sql_connection_trace
+#connection_trace = false
+
+# If set, use this value for pool_timeout with SQLAlchemy. (integer value)
+# Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
+#pool_timeout = <None>
+
+# Enable the experimental use of database reconnect on connection lost.
+# (boolean value)
+#use_db_reconnect = false
+
+# Seconds between retries of a database transaction. (integer value)
+#db_retry_interval = 1
+
+# If True, increases the interval between retries of a database operation up to
+# db_max_retry_interval. (boolean value)
+#db_inc_retry_interval = true
+
+# If db_inc_retry_interval is set, the maximum seconds between retries of a
+# database operation. (integer value)
+#db_max_retry_interval = 10
+
+# Maximum retries in case of connection error or deadlock error before error is
+# raised. Set to -1 to specify an infinite retry count. (integer value)
+#db_max_retries = 20
+
+
+[keystone_authtoken]
+
+#
+# From keystonemiddleware.auth_token
+#
+auth_host = {{ server.identity.host }}
+
+# Port of the admin Identity API endpoint. Deprecated, use
+# identity_uri. (integer value)
+auth_port = 35357
+
+# Protocol of the admin Identity API endpoint (http or https).
+# Deprecated, use identity_uri. (string value)
+auth_protocol=http
+
+# Complete public Identity API endpoint (string value)
+auth_uri=http://{{ server.identity.host }}:5000/v3
+
+# Complete admin Identity API endpoint. This should specify
+# the unversioned root endpoint e.g. https://localhost:35357/
+# (string value)
+identity_uri=http://{{ server.identity.host }}:35357/
+
+# API version of the admin Identity API endpoint (string
+# value)
+#auth_version=<None>
+auth_version=v3.0
+
+# Do not handle authorization requests within the middleware,
+# but delegate the authorization decision to downstream WSGI
+# components (boolean value)
+#delay_auth_decision=false
+
+# Request timeout value for communicating with Identity API
+# server. (boolean value)
+#http_connect_timeout=<None>
+
+# How many times are we trying to reconnect when communicating
+# with Identity API Server. (integer value)
+#http_request_max_retries=3
+
+# This option is deprecated and may be removed in a future
+# release. Single shared secret with the Keystone
+# configuration used for bootstrapping a Keystone
+# installation, or otherwise bypassing the normal
+# authentication process. This option should not be used, use
+# `admin_user` and `admin_password` instead. (string value)
+#admin_token=<None>
+
+# Keystone account username (string value)
+admin_user = {{ server.identity.user }}
+
+# Keystone account password (string value)
+admin_password = {{ server.identity.password }}
+
+# Keystone service account tenant name to validate user tokens
+# (string value)
+admin_tenant_name = {{ server.identity.tenant }}
+# Complete public Identity API endpoint. (string value)
+#auth_uri = <None>
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+# Do not handle authorization requests within the middleware, but delegate the
+# authorization decision to downstream WSGI components. (boolean value)
+#delay_auth_decision = false
+
+# Request timeout value for communicating with Identity API server. (integer
+# value)
+#http_connect_timeout = <None>
+
+# How many times are we trying to reconnect when communicating with Identity
+# API Server. (integer value)
+#http_request_max_retries = 3
+
+# Env key for the swift cache. (string value)
+#cache = <None>
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Directory used to cache files related to PKI tokens. (string value)
+#signing_dir = <None>
+
+# Optionally specify a list of memcached server(s) to use for caching. If left
+# undefined, tokens will instead be cached in-process. (list value)
+# Deprecated group/name - [DEFAULT]/memcache_servers
+#memcached_servers = <None>
+
+# In order to prevent excessive effort spent validating tokens, the middleware
+# caches previously-seen tokens for a configurable duration (in seconds). Set
+# to -1 to disable caching completely. (integer value)
+#token_cache_time = 300
+
+# Determines the frequency at which the list of revoked tokens is retrieved
+# from the Identity service (in seconds). A high number of revocation events
+# combined with a low cache duration may significantly reduce performance.
+# (integer value)
+#revocation_cache_time = 10
+
+# (Optional) If defined, indicate whether token data should be authenticated or
+# authenticated and encrypted. Acceptable values are MAC or ENCRYPT. If MAC,
+# token data is authenticated (with HMAC) in the cache. If ENCRYPT, token data
+# is encrypted and authenticated in the cache. If the value is not one of these
+# options or empty, auth_token will raise an exception on initialization.
+# (string value)
+#memcache_security_strategy = <None>
+
+# (Optional, mandatory if memcache_security_strategy is defined) This string is
+# used for key derivation. (string value)
+#memcache_secret_key = <None>
+
+# (Optional) Number of seconds memcached server is considered dead before it is
+# tried again. (integer value)
+#memcache_pool_dead_retry = 300
+
+# (Optional) Maximum total number of open connections to every memcached
+# server. (integer value)
+#memcache_pool_maxsize = 10
+
+# (Optional) Socket timeout in seconds for communicating with a memcache
+# server. (integer value)
+#memcache_pool_socket_timeout = 3
+
+# (Optional) Number of seconds a connection to memcached is held unused in the
+# pool before it is closed. (integer value)
+#memcache_pool_unused_timeout = 60
+
+# (Optional) Number of seconds that an operation will wait to get a memcache
+# client connection from the pool. (integer value)
+#memcache_pool_conn_get_timeout = 10
+
+# (Optional) Use the advanced (eventlet safe) memcache client pool. The
+# advanced pool will only work under python 2.x. (boolean value)
+#memcache_use_advanced_pool = false
+
+# (Optional) Indicate whether to set the X-Service-Catalog header. If False,
+# middleware will not ask for service catalog on token validation and will not
+# set the X-Service-Catalog header. (boolean value)
+#include_service_catalog = true
+
+# Used to control the use and type of token binding. Can be set to: "disabled"
+# to not check token binding. "permissive" (default) to validate binding
+# information if the bind type is of a form known to the server and ignore it
+# if not. "strict" like "permissive" but if the bind type is unknown the token
+# will be rejected. "required" any form of token binding is needed to be
+# allowed. Finally the name of a binding method that must be present in tokens.
+# (string value)
+#enforce_token_bind = permissive
+
+# If true, the revocation list will be checked for cached tokens. This requires
+# that PKI tokens are configured on the identity server. (boolean value)
+#check_revocations_for_cached = false
+
+# Hash algorithms to use for hashing PKI tokens. This may be a single algorithm
+# or multiple. The algorithms are those supported by Python standard
+# hashlib.new(). The hashes will be tried in the order given, so put the
+# preferred one first for performance. The result of the first hash will be
+# stored in the cache. This will typically be set to multiple values only while
+# migrating from a less secure algorithm to a more secure one. Once all the old
+# tokens are expired this option should be set to a single value for better
+# performance. (list value)
+#hash_algorithms = md5
+
+# Prefix to prepend at the beginning of the path. Deprecated, use identity_uri.
+# (string value)
+#auth_admin_prefix =
+
+# Host providing the admin Identity API endpoint. Deprecated, use identity_uri.
+# (string value)
+#auth_host = 127.0.0.1
+
+# Port of the admin Identity API endpoint. Deprecated, use identity_uri.
+# (integer value)
+#auth_port = 35357
+
+# Protocol of the admin Identity API endpoint (http or https). Deprecated, use
+# identity_uri. (string value)
+#auth_protocol = https
+
+# Complete admin Identity API endpoint. This should specify the unversioned
+# root endpoint e.g. https://localhost:35357/ (string value)
+#identity_uri = <None>
+
+# This option is deprecated and may be removed in a future release. Single
+# shared secret with the Keystone configuration used for bootstrapping a
+# Keystone installation, or otherwise bypassing the normal authentication
+# process. This option should not be used, use `admin_user` and
+# `admin_password` instead. (string value)
+#admin_token = <None>
+
+# Service username. (string value)
+#admin_user = <None>
+
+# Service user password. (string value)
+#admin_password = <None>
+
+# Service tenant name. (string value)
+#admin_tenant_name = admin
+
+
+[matchmaker_redis]
+
+#
+# From oslo.messaging
+#
+
+# Host to locate redis. (string value)
+#host = 127.0.0.1
+
+# Use this port to connect to redis host. (integer value)
+#port = 6379
+
+# Password for Redis server (optional). (string value)
+#password = <None>
+
+
+[matchmaker_ring]
+
+#
+# From oslo.messaging
+#
+
+# Matchmaker ring file (JSON). (string value)
+# Deprecated group/name - [DEFAULT]/matchmaker_ringfile
+#ringfile = /etc/oslo/matchmaker_ring.json
+
+
+[oslo_messaging_amqp]
+
+#
+# From oslo.messaging
+#
+
+# address prefix used when sending to a specific server (string value)
+# Deprecated group/name - [amqp1]/server_request_prefix
+#server_request_prefix = exclusive
+
+# address prefix used when broadcasting to all servers (string value)
+# Deprecated group/name - [amqp1]/broadcast_prefix
+#broadcast_prefix = broadcast
+
+# address prefix when sending to any server in group (string value)
+# Deprecated group/name - [amqp1]/group_request_prefix
+#group_request_prefix = unicast
+
+# Name for the AMQP container (string value)
+# Deprecated group/name - [amqp1]/container_name
+#container_name = <None>
+
+# Timeout for inactive connections (in seconds) (integer value)
+# Deprecated group/name - [amqp1]/idle_timeout
+#idle_timeout = 0
+
+# Debug: dump AMQP frames to stdout (boolean value)
+# Deprecated group/name - [amqp1]/trace
+#trace = false
+
+# CA certificate PEM file for verifing server certificate (string value)
+# Deprecated group/name - [amqp1]/ssl_ca_file
+#ssl_ca_file =
+
+# Identifying certificate PEM file to present to clients (string value)
+# Deprecated group/name - [amqp1]/ssl_cert_file
+#ssl_cert_file =
+
+# Private key PEM file used to sign cert_file certificate (string value)
+# Deprecated group/name - [amqp1]/ssl_key_file
+#ssl_key_file =
+
+# Password for decrypting ssl_key_file (if encrypted) (string value)
+# Deprecated group/name - [amqp1]/ssl_key_password
+#ssl_key_password = <None>
+
+# Accept clients using either SSL or plain TCP (boolean value)
+# Deprecated group/name - [amqp1]/allow_insecure_clients
+#allow_insecure_clients = false
+
+
+[oslo_messaging_qpid]
+
+#
+# From oslo.messaging
+#
+
+# Use durable queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
+#amqp_durable_queues = false
+
+# Auto-delete queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/amqp_auto_delete
+#amqp_auto_delete = false
+
+# Qpid broker hostname. (string value)
+# Deprecated group/name - [DEFAULT]/qpid_hostname
+#qpid_hostname = localhost
+
+# Qpid broker port. (integer value)
+# Deprecated group/name - [DEFAULT]/qpid_port
+#qpid_port = 5672
+
+# Qpid HA cluster host:port pairs. (list value)
+# Deprecated group/name - [DEFAULT]/qpid_hosts
+#qpid_hosts = $qpid_hostname:$qpid_port
+
+# Username for Qpid connection. (string value)
+# Deprecated group/name - [DEFAULT]/qpid_username
+#qpid_username =
+
+# Password for Qpid connection. (string value)
+# Deprecated group/name - [DEFAULT]/qpid_password
+#qpid_password =
+
+# Space separated list of SASL mechanisms to use for auth. (string value)
+# Deprecated group/name - [DEFAULT]/qpid_sasl_mechanisms
+#qpid_sasl_mechanisms =
+
+# Seconds between connection keepalive heartbeats. (integer value)
+# Deprecated group/name - [DEFAULT]/qpid_heartbeat
+#qpid_heartbeat = 60
+
+# Transport to use, either 'tcp' or 'ssl'. (string value)
+# Deprecated group/name - [DEFAULT]/qpid_protocol
+#qpid_protocol = tcp
+
+# Whether to disable the Nagle algorithm. (boolean value)
+# Deprecated group/name - [DEFAULT]/qpid_tcp_nodelay
+#qpid_tcp_nodelay = true
+
+# The number of prefetched messages held by receiver. (integer value)
+# Deprecated group/name - [DEFAULT]/qpid_receiver_capacity
+#qpid_receiver_capacity = 1
+
+# The qpid topology version to use. Version 1 is what was originally used by
+# impl_qpid. Version 2 includes some backwards-incompatible changes that allow
+# broker federation to work. Users should update to version 2 when they are
+# able to take everything down, as it requires a clean break. (integer value)
+# Deprecated group/name - [DEFAULT]/qpid_topology_version
+#qpid_topology_version = 1
+
+
+[oslo_messaging_rabbit]
+
+#
+# From oslo.messaging
+#
+
+# Use durable queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
+#amqp_durable_queues = false
+
+# Auto-delete queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/amqp_auto_delete
+#amqp_auto_delete = false
+
+# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
+# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
+# distributions. (string value)
+# Deprecated group/name - [DEFAULT]/kombu_ssl_version
+#kombu_ssl_version =
+
+# SSL key file (valid only if SSL enabled). (string value)
+# Deprecated group/name - [DEFAULT]/kombu_ssl_keyfile
+#kombu_ssl_keyfile =
+
+# SSL cert file (valid only if SSL enabled). (string value)
+# Deprecated group/name - [DEFAULT]/kombu_ssl_certfile
+#kombu_ssl_certfile =
+
+# SSL certification authority file (valid only if SSL enabled). (string value)
+# Deprecated group/name - [DEFAULT]/kombu_ssl_ca_certs
+#kombu_ssl_ca_certs =
+
+# How long to wait before reconnecting in response to an AMQP consumer cancel
+# notification. (floating point value)
+# Deprecated group/name - [DEFAULT]/kombu_reconnect_delay
+#kombu_reconnect_delay = 1.0
+
+# The RabbitMQ broker address where a single node is used. (string value)
+# Deprecated group/name - [DEFAULT]/rabbit_host
+rabbit_host = {{ server.message_queue.host }}
+
+# The RabbitMQ broker port where a single node is used.
+# (integer value)
+rabbit_port = {{ server.message_queue.port }}
+
+# RabbitMQ HA cluster host:port pairs. (list value)
+#rabbit_hosts=$rabbit_host:$rabbit_port
+
+# Connect over SSL for RabbitMQ. (boolean value)
+#rabbit_use_ssl=false
+
+# The RabbitMQ userid. (string value)
+rabbit_userid = {{ server.message_queue.user }}
+
+# The RabbitMQ password. (string value)
+rabbit_password = {{ server.message_queue.password }}
+
+# The RabbitMQ login method. (string value)
+#rabbit_login_method=AMQPLAIN
+
+# The RabbitMQ virtual host. (string value)
+rabbit_virtual_host = {{ server.message_queue.virtual_host }}
+
+# How frequently to retry connecting with RabbitMQ. (integer
+# value)
+#rabbit_retry_interval=1
+
+# How long to backoff for between retries when connecting to
+# RabbitMQ. (integer value)
+#rabbit_retry_backoff=2
+
+# Maximum number of RabbitMQ connection retries. Default is 0
+# (infinite retry count). (integer value)
+#rabbit_max_retries=0
+
+# Use HA queues in RabbitMQ (x-ha-policy: all). If you change
+# this option, you must wipe the RabbitMQ database. (boolean
+# value)
+rabbit_ha_queues={{ server.message_queue.ha_queues }}
+
+#rabbit_host = localhost
+
+# The RabbitMQ broker port where a single node is used. (integer value)
+# Deprecated group/name - [DEFAULT]/rabbit_port
+#rabbit_port = 5672
+
+# RabbitMQ HA cluster host:port pairs. (list value)
+# Deprecated group/name - [DEFAULT]/rabbit_hosts
+#rabbit_hosts = $rabbit_host:$rabbit_port
+
+# Connect over SSL for RabbitMQ. (boolean value)
+# Deprecated group/name - [DEFAULT]/rabbit_use_ssl
+#rabbit_use_ssl = false
+
+# The RabbitMQ userid. (string value)
+# Deprecated group/name - [DEFAULT]/rabbit_userid
+#rabbit_userid = guest
+
+# The RabbitMQ password. (string value)
+# Deprecated group/name - [DEFAULT]/rabbit_password
+#rabbit_password = guest
+
+# The RabbitMQ login method. (string value)
+# Deprecated group/name - [DEFAULT]/rabbit_login_method
+#rabbit_login_method = AMQPLAIN
+
+# The RabbitMQ virtual host. (string value)
+# Deprecated group/name - [DEFAULT]/rabbit_virtual_host
+#rabbit_virtual_host = /
+
+# How frequently to retry connecting with RabbitMQ. (integer value)
+#rabbit_retry_interval = 1
+
+# How long to backoff for between retries when connecting to RabbitMQ. (integer
+# value)
+# Deprecated group/name - [DEFAULT]/rabbit_retry_backoff
+#rabbit_retry_backoff = 2
+
+# Maximum number of RabbitMQ connection retries. Default is 0 (infinite retry
+# count). (integer value)
+# Deprecated group/name - [DEFAULT]/rabbit_max_retries
+#rabbit_max_retries = 0
+
+# Use HA queues in RabbitMQ (x-ha-policy: all). If you change this option, you
+# must wipe the RabbitMQ database. (boolean value)
+# Deprecated group/name - [DEFAULT]/rabbit_ha_queues
+#rabbit_ha_queues = false
+
+# Number of seconds after which the Rabbit broker is considered down if
+# heartbeat's keep-alive fails (0 disable the heartbeat). (integer value)
+#heartbeat_timeout_threshold = 60
+
+# How often times during the heartbeat_timeout_threshold we check the
+# heartbeat. (integer value)
+#heartbeat_rate = 2
+
+# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake (boolean value)
+# Deprecated group/name - [DEFAULT]/fake_rabbit
+#fake_rabbit = false
+
+[ec2authtoken]
+
+#
+# Options defined in heat.api.aws.ec2token
+#
+
+# Authentication Endpoint URI. (string value)
+auth_uri=http://{{ server.identity.host }}:5000/v2.0
+
+# Allow orchestration of multiple clouds. (boolean value)
+#multi_cloud=false
+
+# Allowed keystone endpoints for auth_uri when multi_cloud is
+# enabled. At least one endpoint needs to be specified. (list
+# value)
+#allowed_auth_uris=
+
+keystone_ec2_uri=http://{{ server.identity.host }}:5000/v2.0/ec2tokens
+
+{%- if pillar.get('opencontrail', {}).get('client', {}).get('enabled', False) %}
+
+{%- from "opencontrail/map.jinja" import client with context %}
+
+[clients_contrail]
+
+user={{ client.identity.user }}
+password={{ client.identity.password }}
+tenant={{ client.identity.tenant }}
+auth_host_ip={{ client.identity.host }}
+api_server={{ client.api.host }}
+api_port={{ client.api.port }}
+
+{%- endif %}
diff --git a/heat/files/kilo/heat.conf.RedHat b/heat/files/kilo/heat.conf.RedHat
new file mode 120000
index 0000000..08e351a
--- /dev/null
+++ b/heat/files/kilo/heat.conf.RedHat
@@ -0,0 +1 @@
+heat.conf.Debian
\ No newline at end of file
diff --git a/heat/files/liberty/api-paste.ini b/heat/files/liberty/api-paste.ini
new file mode 100644
index 0000000..e75c3a1
--- /dev/null
+++ b/heat/files/liberty/api-paste.ini
@@ -0,0 +1,104 @@
+
+# heat-api pipeline
+[pipeline:heat-api]
+pipeline = request_id faultwrap ssl versionnegotiation osprofiler authurl authtoken context apiv1app
+
+# heat-api pipeline for standalone heat
+# ie. uses alternative auth backend that authenticates users against keystone
+# using username and password instead of validating token (which requires
+# an admin/service token).
+# To enable, in heat.conf:
+# [paste_deploy]
+# flavor = standalone
+#
+[pipeline:heat-api-standalone]
+pipeline = request_id faultwrap ssl versionnegotiation authurl authpassword context apiv1app
+
+# heat-api pipeline for custom cloud backends
+# i.e. in heat.conf:
+# [paste_deploy]
+# flavor = custombackend
+#
+[pipeline:heat-api-custombackend]
+pipeline = request_id faultwrap versionnegotiation context custombackendauth apiv1app
+
+# heat-api-cfn pipeline
+[pipeline:heat-api-cfn]
+pipeline = cfnversionnegotiation osprofiler ec2authtoken authtoken context apicfnv1app
+
+# heat-api-cfn pipeline for standalone heat
+# relies exclusively on authenticating with ec2 signed requests
+[pipeline:heat-api-cfn-standalone]
+pipeline = cfnversionnegotiation ec2authtoken context apicfnv1app
+
+# heat-api-cloudwatch pipeline
+[pipeline:heat-api-cloudwatch]
+pipeline = versionnegotiation osprofiler ec2authtoken authtoken context apicwapp
+
+# heat-api-cloudwatch pipeline for standalone heat
+# relies exclusively on authenticating with ec2 signed requests
+[pipeline:heat-api-cloudwatch-standalone]
+pipeline = versionnegotiation ec2authtoken context apicwapp
+
+[app:apiv1app]
+paste.app_factory = heat.common.wsgi:app_factory
+heat.app_factory = heat.api.openstack.v1:API
+
+[app:apicfnv1app]
+paste.app_factory = heat.common.wsgi:app_factory
+heat.app_factory = heat.api.cfn.v1:API
+
+[app:apicwapp]
+paste.app_factory = heat.common.wsgi:app_factory
+heat.app_factory = heat.api.cloudwatch:API
+
+[filter:versionnegotiation]
+paste.filter_factory = heat.common.wsgi:filter_factory
+heat.filter_factory = heat.api.openstack:version_negotiation_filter
+
+[filter:faultwrap]
+paste.filter_factory = heat.common.wsgi:filter_factory
+heat.filter_factory = heat.api.openstack:faultwrap_filter
+
+[filter:cfnversionnegotiation]
+paste.filter_factory = heat.common.wsgi:filter_factory
+heat.filter_factory = heat.api.cfn:version_negotiation_filter
+
+[filter:cwversionnegotiation]
+paste.filter_factory = heat.common.wsgi:filter_factory
+heat.filter_factory = heat.api.cloudwatch:version_negotiation_filter
+
+[filter:context]
+paste.filter_factory = heat.common.context:ContextMiddleware_filter_factory
+
+[filter:ec2authtoken]
+paste.filter_factory = heat.api.aws.ec2token:EC2Token_filter_factory
+
+[filter:ssl]
+paste.filter_factory = heat.common.wsgi:filter_factory
+heat.filter_factory = heat.api.openstack:sslmiddleware_filter
+
+# Middleware to set auth_url header appropriately
+[filter:authurl]
+paste.filter_factory = heat.common.auth_url:filter_factory
+
+# Auth middleware that validates token against keystone
+[filter:authtoken]
+paste.filter_factory = keystonemiddleware.auth_token:filter_factory
+
+# Auth middleware that validates username/password against keystone
+[filter:authpassword]
+paste.filter_factory = heat.common.auth_password:filter_factory
+
+# Auth middleware that validates against custom backend
+[filter:custombackendauth]
+paste.filter_factory = heat.common.custom_backend_auth:filter_factory
+
+# Middleware to set x-openstack-request-id in http response header
+[filter:request_id]
+paste.filter_factory = oslo_middleware.request_id:RequestId.factory
+
+[filter:osprofiler]
+paste.filter_factory = osprofiler.web:WsgiMiddleware.factory
+hmac_keys = SECRET_KEY
+enabled = yes
diff --git a/heat/files/liberty/heat.conf.Debian b/heat/files/liberty/heat.conf.Debian
new file mode 100644
index 0000000..6fab1b7
--- /dev/null
+++ b/heat/files/liberty/heat.conf.Debian
@@ -0,0 +1,922 @@
+{%- from "heat/map.jinja" import server with context %}
+[DEFAULT]
+
+#
+# From oslo.log
+#
+
+region_name_for_services={{ server.region }}
+
+# Print debugging output (set logging level to DEBUG instead of default WARNING
+# level). (boolean value)
+#debug = false
+
+# Print more verbose output (set logging level to INFO instead of default
+# WARNING level). (boolean value)
+#verbose = false
+verbose = true
+
+# The name of a logging configuration file. This file is appended to any
+# existing logging configuration files. For details about logging configuration
+# files, see the Python logging module documentation. (string value)
+# Deprecated group/name - [DEFAULT]/log_config
+#log_config_append = <None>
+
+# DEPRECATED. A logging.Formatter log message format string which may use any
+# of the available logging.LogRecord attributes. This option is deprecated.
+# Please use logging_context_format_string and logging_default_format_string
+# instead. (string value)
+#log_format = <None>
+heat_metadata_server_url=http://{{ server.metadata.host }}:{{ server.metadata.port }}
+
+# URL of the Heat waitcondition server. (string value)
+heat_waitcondition_server_url=http://{{ server.waitcondition.host }}:{{ server.waitcondition.port }}/v1/waitcondition
+
+# URL of the Heat CloudWatch server. (string value)
+heat_watch_server_url=http://{{ server.watch.host }}:{{ server.watch.port }}
+# Format string for %%(asctime)s in log records. Default: %(default)s . (string
+# value)
+#log_date_format = %Y-%m-%d %H:%M:%S
+
+# (Optional) Name of log file to output to. If no default is set, logging will
+# go to stdout. (string value)
+# Deprecated group/name - [DEFAULT]/logfile
+#log_file = <None>
+log_file=/var/log/heat/heat.log
+
+# (Optional) The base directory used for relative --log-file paths. (string
+# value)
+# Deprecated group/name - [DEFAULT]/logdir
+#log_dir = <None>
+
+# Use syslog for logging. Existing syslog format is DEPRECATED during I, and
+# will change in J to honor RFC5424. (boolean value)
+#use_syslog = false
+
+workers=4
+
+{%- if server.stack_domain_admin is defined %}
+
+# Keystone username, a user with roles sufficient to manage
+# users and projects in the stack_user_domain. (string value)
+stack_domain_admin = heat_domain_admin
+
+# Keystone password for stack_domain_admin user. (string
+# value)
+stack_domain_admin_password={{ server.stack_domain_admin.password }}
+
+stack_user_domain_name = heat_user_domain
+
+{%- else %}
+
+# Keystone username, a user with roles sufficient to manage
+# users and projects in the stack_user_domain. (string value)
+#stack_domain_admin=<None>
+
+# Keystone password for stack_domain_admin user. (string
+# value)
+#stack_domain_admin_password=<None>
+
+{%- endif %}
+
+# (Optional) Enables or disables syslog rfc5424 format for logging. If enabled,
+# prefixes the MSG part of the syslog message with APP-NAME (RFC5424). The
+# format without the APP-NAME is deprecated in I, and will be removed in J.
+# (boolean value)
+#use_syslog_rfc_format = false
+
+# Syslog facility to receive log lines. (string value)
+#syslog_log_facility = LOG_USER
+
+# Log output to standard error. (boolean value)
+#use_stderr = true
+
+# Format string to use for log messages with context. (string value)
+#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
+
+# Format string to use for log messages without context. (string value)
+#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
+
+# Data to append to log format when level is DEBUG. (string value)
+#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
+
+# Prefix each line of exception output with this format. (string value)
+#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d TRACE %(name)s %(instance)s
+
+# List of logger=LEVEL pairs. (list value)
+#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN
+
+# Enables or disables publication of error events. (boolean value)
+#publish_errors = false
+
+# Enables or disables fatal status of deprecations. (boolean value)
+#fatal_deprecations = false
+
+# The format for an instance that is passed with the log message. (string
+# value)
+#instance_format = "[instance: %(uuid)s] "
+
+# The format for an instance UUID that is passed with the log message. (string
+# value)
+#instance_uuid_format = "[instance: %(uuid)s] "
+
+#
+# From oslo.messaging
+#
+
+# Size of RPC connection pool. (integer value)
+#rpc_conn_pool_size = 30
+
+# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
+# The "host" option should point or resolve to this address. (string value)
+#rpc_zmq_bind_address = *
+
+# MatchMaker driver. (string value)
+#rpc_zmq_matchmaker = local
+
+# ZeroMQ receiver listening port. (integer value)
+#rpc_zmq_port = 9501
+
+# Number of ZeroMQ contexts, defaults to 1. (integer value)
+#rpc_zmq_contexts = 1
+
+# Maximum number of ingress messages to locally buffer per topic. Default is
+# unlimited. (integer value)
+#rpc_zmq_topic_backlog = <None>
+
+# Directory for holding IPC sockets. (string value)
+#rpc_zmq_ipc_dir = /var/run/openstack
+
+# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
+# "host" option, if running Nova. (string value)
+#rpc_zmq_host = localhost
+
+# Seconds to wait before a cast expires (TTL). Only supported by impl_zmq.
+# (integer value)
+#rpc_cast_timeout = 30
+
+# Heartbeat frequency. (integer value)
+#matchmaker_heartbeat_freq = 300
+
+# Heartbeat time-to-live. (integer value)
+#matchmaker_heartbeat_ttl = 600
+
+# Size of RPC thread pool. (integer value)
+#rpc_thread_pool_size = 64
+
+# Driver or drivers to handle sending notifications. (multi valued)
+#notification_driver =
+notification_driver = oslo.messaging.notifier.Notifier
+
+# AMQP topic used for OpenStack notifications. (list value)
+# Deprecated group/name - [rpc_notifier2]/topics
+#notification_topics = notifications
+
+# Seconds to wait for a response from a call. (integer value)
+#rpc_response_timeout = 60
+
+# A URL representing the messaging driver to use and its full configuration. If
+# not set, we fall back to the rpc_backend option and driver specific
+# configuration. (string value)
+#transport_url = <None>
+
+# The messaging driver to use, defaults to rabbit. Other drivers include qpid
+# and zmq. (string value)
+#rpc_backend = rabbit
+rpc_backend = rabbit
+
+# The default exchange under which topics are scoped. May be overridden by an
+# exchange name specified in the transport_url option. (string value)
+#control_exchange = openstack
+
+[heat_api]
+
+#
+# Options defined in heat.common.wsgi
+#
+
+# Address to bind the server. Useful when selecting a
+# particular network interface. (string value)
+bind_host={{ server.bind.api.address }}
+
+# The port on which the server will listen. (integer value)
+#bind_port=8004
+
+# Number of backlog requests to configure the socket with.
+# (integer value)
+#backlog=4096
+
+# Location of the SSL certificate file to use for SSL mode.
+# (string value)
+#cert_file=<None>
+
+# Location of the SSL key file to use for enabling SSL mode.
+# (string value)
+#key_file=<None>
+
+# Number of workers for Heat service. (integer value)
+#workers=0
+
+# Maximum line size of message headers to be accepted.
+# max_header_line may need to be increased when using large
+# tokens (typically those generated by the Keystone v3 API
+# with big service catalogs). (integer value)
+#max_header_line=16384
+
+
+[heat_api_cfn]
+
+#
+# Options defined in heat.common.wsgi
+#
+
+# Address to bind the server. Useful when selecting a
+# particular network interface. (string value)
+bind_host={{ server.bind.api_cfn.address }}
+
+# The port on which the server will listen. (integer value)
+#bind_port=8000
+
+# Number of backlog requests to configure the socket with.
+# (integer value)
+#backlog=4096
+
+# Location of the SSL certificate file to use for SSL mode.
+# (string value)
+#cert_file=<None>
+
+# Location of the SSL key file to use for enabling SSL mode.
+# (string value)
+#key_file=<None>
+
+# Number of workers for Heat service. (integer value)
+#workers=0
+
+# Maximum line size of message headers to be accepted.
+# max_header_line may need to be increased when using large
+# tokens (typically those generated by the Keystone v3 API
+# with big service catalogs). (integer value)
+#max_header_line=16384
+
+
+[heat_api_cloudwatch]
+
+#
+# Options defined in heat.common.wsgi
+#
+
+# Address to bind the server. Useful when selecting a
+# particular network interface. (string value)
+bind_host={{ server.bind.api_cloudwatch.address }}
+
+# The port on which the server will listen. (integer value)
+#bind_port=8003
+
+# Number of backlog requests to configure the socket with.
+# (integer value)
+#backlog=4096
+
+# Location of the SSL certificate file to use for SSL mode.
+# (string value)
+#cert_file=<None>
+
+# Location of the SSL key file to use for enabling SSL mode.
+# (string value)
+#key_file=<None>
+
+# Number of workers for Heat service. (integer value)
+#workers=0
+
+# Maximum line size of message headers to be accepted.
+# max_header_line may need to be increased when using large
+# tokens (typically those generated by the Keystone v3 API
+# with big service catalogs.) (integer value)
+#max_header_line=16384
+
+
+[database]
+
+#
+# From oslo.db
+#
+
+# The file name to use with SQLite. (string value)
+# Deprecated group/name - [DEFAULT]/sqlite_db
+#sqlite_db = oslo.sqlite
+
+# If True, SQLite uses synchronous mode. (boolean value)
+# Deprecated group/name - [DEFAULT]/sqlite_synchronous
+#sqlite_synchronous = true
+
+# The back end to use for the database. (string value)
+# Deprecated group/name - [DEFAULT]/db_backend
+#backend = sqlalchemy
+
+# The SQLAlchemy connection string to use to connect to the database. (string
+# value)
+# Deprecated group/name - [DEFAULT]/sql_connection
+# Deprecated group/name - [DATABASE]/sql_connection
+# Deprecated group/name - [sql]/connection
+#connection = <None>
+connection = {{ server.database.engine }}://{{ server.database.user }}:{{ server.database.password }}@{{ server.database.host }}/{{ server.database.name }}
+
+# The SQLAlchemy connection string to use to connect to the slave database.
+# (string value)
+#slave_connection = <None>
+
+# The SQL mode to be used for MySQL sessions. This option, including the
+# default, overrides any server-set SQL mode. To use whatever SQL mode is set
+# by the server configuration, set this to no value. Example: mysql_sql_mode=
+# (string value)
+#mysql_sql_mode = TRADITIONAL
+
+# Timeout before idle SQL connections are reaped. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_idle_timeout
+# Deprecated group/name - [DATABASE]/sql_idle_timeout
+# Deprecated group/name - [sql]/idle_timeout
+#idle_timeout = 3600
+
+# Minimum number of SQL connections to keep open in a pool. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_min_pool_size
+# Deprecated group/name - [DATABASE]/sql_min_pool_size
+#min_pool_size = 1
+
+# Maximum number of SQL connections to keep open in a pool. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_max_pool_size
+# Deprecated group/name - [DATABASE]/sql_max_pool_size
+#max_pool_size = <None>
+
+# Maximum number of database connection retries during startup. Set to -1 to
+# specify an infinite retry count. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_max_retries
+# Deprecated group/name - [DATABASE]/sql_max_retries
+#max_retries = 10
+
+# Interval between retries of opening a SQL connection. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_retry_interval
+# Deprecated group/name - [DATABASE]/reconnect_interval
+#retry_interval = 10
+
+# If set, use this value for max_overflow with SQLAlchemy. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_max_overflow
+# Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
+#max_overflow = <None>
+
+# Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
+# value)
+# Deprecated group/name - [DEFAULT]/sql_connection_debug
+#connection_debug = 0
+
+# Add Python stack traces to SQL as comment strings. (boolean value)
+# Deprecated group/name - [DEFAULT]/sql_connection_trace
+#connection_trace = false
+
+# If set, use this value for pool_timeout with SQLAlchemy. (integer value)
+# Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
+#pool_timeout = <None>
+
+# Enable the experimental use of database reconnect on connection lost.
+# (boolean value)
+#use_db_reconnect = false
+
+# Seconds between retries of a database transaction. (integer value)
+#db_retry_interval = 1
+
+# If True, increases the interval between retries of a database operation up to
+# db_max_retry_interval. (boolean value)
+#db_inc_retry_interval = true
+
+# If db_inc_retry_interval is set, the maximum seconds between retries of a
+# database operation. (integer value)
+#db_max_retry_interval = 10
+
+# Maximum retries in case of connection error or deadlock error before error is
+# raised. Set to -1 to specify an infinite retry count. (integer value)
+#db_max_retries = 20
+
+
+[keystone_authtoken]
+
+#
+# From keystonemiddleware.auth_token
+#
+auth_host = {{ server.identity.host }}
+
+# Port of the admin Identity API endpoint. Deprecated, use
+# identity_uri. (integer value)
+auth_port = 35357
+
+# Protocol of the admin Identity API endpoint (http or https).
+# Deprecated, use identity_uri. (string value)
+auth_protocol=http
+
+# Complete public Identity API endpoint (string value)
+auth_uri=http://{{ server.identity.host }}:5000/v3
+
+# Complete admin Identity API endpoint. This should specify
+# the unversioned root endpoint e.g. https://localhost:35357/
+# (string value)
+identity_uri=http://{{ server.identity.host }}:35357/
+
+# API version of the admin Identity API endpoint (string
+# value)
+#auth_version=<None>
+auth_version=v3.0
+
+# Do not handle authorization requests within the middleware,
+# but delegate the authorization decision to downstream WSGI
+# components (boolean value)
+#delay_auth_decision=false
+
+# Request timeout value for communicating with Identity API
+# server. (boolean value)
+#http_connect_timeout=<None>
+
+# How many times are we trying to reconnect when communicating
+# with Identity API Server. (integer value)
+#http_request_max_retries=3
+
+# This option is deprecated and may be removed in a future
+# release. Single shared secret with the Keystone
+# configuration used for bootstrapping a Keystone
+# installation, or otherwise bypassing the normal
+# authentication process. This option should not be used, use
+# `admin_user` and `admin_password` instead. (string value)
+#admin_token=<None>
+
+# Keystone account username (string value)
+admin_user = {{ server.identity.user }}
+
+# Keystone account password (string value)
+admin_password = {{ server.identity.password }}
+
+# Keystone service account tenant name to validate user tokens
+# (string value)
+admin_tenant_name = {{ server.identity.tenant }}
+# Complete public Identity API endpoint. (string value)
+#auth_uri = <None>
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+# Do not handle authorization requests within the middleware, but delegate the
+# authorization decision to downstream WSGI components. (boolean value)
+#delay_auth_decision = false
+
+# Request timeout value for communicating with Identity API server. (integer
+# value)
+#http_connect_timeout = <None>
+
+# How many times are we trying to reconnect when communicating with Identity
+# API Server. (integer value)
+#http_request_max_retries = 3
+
+# Env key for the swift cache. (string value)
+#cache = <None>
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Directory used to cache files related to PKI tokens. (string value)
+#signing_dir = <None>
+
+# Optionally specify a list of memcached server(s) to use for caching. If left
+# undefined, tokens will instead be cached in-process. (list value)
+# Deprecated group/name - [DEFAULT]/memcache_servers
+#memcached_servers = <None>
+
+# In order to prevent excessive effort spent validating tokens, the middleware
+# caches previously-seen tokens for a configurable duration (in seconds). Set
+# to -1 to disable caching completely. (integer value)
+#token_cache_time = 300
+
+# Determines the frequency at which the list of revoked tokens is retrieved
+# from the Identity service (in seconds). A high number of revocation events
+# combined with a low cache duration may significantly reduce performance.
+# (integer value)
+#revocation_cache_time = 10
+
+# (Optional) If defined, indicate whether token data should be authenticated or
+# authenticated and encrypted. Acceptable values are MAC or ENCRYPT. If MAC,
+# token data is authenticated (with HMAC) in the cache. If ENCRYPT, token data
+# is encrypted and authenticated in the cache. If the value is not one of these
+# options or empty, auth_token will raise an exception on initialization.
+# (string value)
+#memcache_security_strategy = <None>
+
+# (Optional, mandatory if memcache_security_strategy is defined) This string is
+# used for key derivation. (string value)
+#memcache_secret_key = <None>
+
+# (Optional) Number of seconds memcached server is considered dead before it is
+# tried again. (integer value)
+#memcache_pool_dead_retry = 300
+
+# (Optional) Maximum total number of open connections to every memcached
+# server. (integer value)
+#memcache_pool_maxsize = 10
+
+# (Optional) Socket timeout in seconds for communicating with a memcache
+# server. (integer value)
+#memcache_pool_socket_timeout = 3
+
+# (Optional) Number of seconds a connection to memcached is held unused in the
+# pool before it is closed. (integer value)
+#memcache_pool_unused_timeout = 60
+
+# (Optional) Number of seconds that an operation will wait to get a memcache
+# client connection from the pool. (integer value)
+#memcache_pool_conn_get_timeout = 10
+
+# (Optional) Use the advanced (eventlet safe) memcache client pool. The
+# advanced pool will only work under python 2.x. (boolean value)
+#memcache_use_advanced_pool = false
+
+# (Optional) Indicate whether to set the X-Service-Catalog header. If False,
+# middleware will not ask for service catalog on token validation and will not
+# set the X-Service-Catalog header. (boolean value)
+#include_service_catalog = true
+
+# Used to control the use and type of token binding. Can be set to: "disabled"
+# to not check token binding. "permissive" (default) to validate binding
+# information if the bind type is of a form known to the server and ignore it
+# if not. "strict" like "permissive" but if the bind type is unknown the token
+# will be rejected. "required" any form of token binding is needed to be
+# allowed. Finally the name of a binding method that must be present in tokens.
+# (string value)
+#enforce_token_bind = permissive
+
+# If true, the revocation list will be checked for cached tokens. This requires
+# that PKI tokens are configured on the identity server. (boolean value)
+#check_revocations_for_cached = false
+
+# Hash algorithms to use for hashing PKI tokens. This may be a single algorithm
+# or multiple. The algorithms are those supported by Python standard
+# hashlib.new(). The hashes will be tried in the order given, so put the
+# preferred one first for performance. The result of the first hash will be
+# stored in the cache. This will typically be set to multiple values only while
+# migrating from a less secure algorithm to a more secure one. Once all the old
+# tokens are expired this option should be set to a single value for better
+# performance. (list value)
+#hash_algorithms = md5
+
+# Prefix to prepend at the beginning of the path. Deprecated, use identity_uri.
+# (string value)
+#auth_admin_prefix =
+
+# Host providing the admin Identity API endpoint. Deprecated, use identity_uri.
+# (string value)
+#auth_host = 127.0.0.1
+
+# Port of the admin Identity API endpoint. Deprecated, use identity_uri.
+# (integer value)
+#auth_port = 35357
+
+# Protocol of the admin Identity API endpoint (http or https). Deprecated, use
+# identity_uri. (string value)
+#auth_protocol = https
+
+# Complete admin Identity API endpoint. This should specify the unversioned
+# root endpoint e.g. https://localhost:35357/ (string value)
+#identity_uri = <None>
+
+# This option is deprecated and may be removed in a future release. Single
+# shared secret with the Keystone configuration used for bootstrapping a
+# Keystone installation, or otherwise bypassing the normal authentication
+# process. This option should not be used, use `admin_user` and
+# `admin_password` instead. (string value)
+#admin_token = <None>
+
+# Service username. (string value)
+#admin_user = <None>
+
+# Service user password. (string value)
+#admin_password = <None>
+
+# Service tenant name. (string value)
+#admin_tenant_name = admin
+
+
+[matchmaker_redis]
+
+#
+# From oslo.messaging
+#
+
+# Host to locate redis. (string value)
+#host = 127.0.0.1
+
+# Use this port to connect to redis host. (integer value)
+#port = 6379
+
+# Password for Redis server (optional). (string value)
+#password = <None>
+
+
+[matchmaker_ring]
+
+#
+# From oslo.messaging
+#
+
+# Matchmaker ring file (JSON). (string value)
+# Deprecated group/name - [DEFAULT]/matchmaker_ringfile
+#ringfile = /etc/oslo/matchmaker_ring.json
+
+
+[oslo_messaging_amqp]
+
+#
+# From oslo.messaging
+#
+
+# address prefix used when sending to a specific server (string value)
+# Deprecated group/name - [amqp1]/server_request_prefix
+#server_request_prefix = exclusive
+
+# address prefix used when broadcasting to all servers (string value)
+# Deprecated group/name - [amqp1]/broadcast_prefix
+#broadcast_prefix = broadcast
+
+# address prefix when sending to any server in group (string value)
+# Deprecated group/name - [amqp1]/group_request_prefix
+#group_request_prefix = unicast
+
+# Name for the AMQP container (string value)
+# Deprecated group/name - [amqp1]/container_name
+#container_name = <None>
+
+# Timeout for inactive connections (in seconds) (integer value)
+# Deprecated group/name - [amqp1]/idle_timeout
+#idle_timeout = 0
+
+# Debug: dump AMQP frames to stdout (boolean value)
+# Deprecated group/name - [amqp1]/trace
+#trace = false
+
+# CA certificate PEM file for verifing server certificate (string value)
+# Deprecated group/name - [amqp1]/ssl_ca_file
+#ssl_ca_file =
+
+# Identifying certificate PEM file to present to clients (string value)
+# Deprecated group/name - [amqp1]/ssl_cert_file
+#ssl_cert_file =
+
+# Private key PEM file used to sign cert_file certificate (string value)
+# Deprecated group/name - [amqp1]/ssl_key_file
+#ssl_key_file =
+
+# Password for decrypting ssl_key_file (if encrypted) (string value)
+# Deprecated group/name - [amqp1]/ssl_key_password
+#ssl_key_password = <None>
+
+# Accept clients using either SSL or plain TCP (boolean value)
+# Deprecated group/name - [amqp1]/allow_insecure_clients
+#allow_insecure_clients = false
+
+
+[oslo_messaging_qpid]
+
+#
+# From oslo.messaging
+#
+
+# Use durable queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
+#amqp_durable_queues = false
+
+# Auto-delete queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/amqp_auto_delete
+#amqp_auto_delete = false
+
+# Qpid broker hostname. (string value)
+# Deprecated group/name - [DEFAULT]/qpid_hostname
+#qpid_hostname = localhost
+
+# Qpid broker port. (integer value)
+# Deprecated group/name - [DEFAULT]/qpid_port
+#qpid_port = 5672
+
+# Qpid HA cluster host:port pairs. (list value)
+# Deprecated group/name - [DEFAULT]/qpid_hosts
+#qpid_hosts = $qpid_hostname:$qpid_port
+
+# Username for Qpid connection. (string value)
+# Deprecated group/name - [DEFAULT]/qpid_username
+#qpid_username =
+
+# Password for Qpid connection. (string value)
+# Deprecated group/name - [DEFAULT]/qpid_password
+#qpid_password =
+
+# Space separated list of SASL mechanisms to use for auth. (string value)
+# Deprecated group/name - [DEFAULT]/qpid_sasl_mechanisms
+#qpid_sasl_mechanisms =
+
+# Seconds between connection keepalive heartbeats. (integer value)
+# Deprecated group/name - [DEFAULT]/qpid_heartbeat
+#qpid_heartbeat = 60
+
+# Transport to use, either 'tcp' or 'ssl'. (string value)
+# Deprecated group/name - [DEFAULT]/qpid_protocol
+#qpid_protocol = tcp
+
+# Whether to disable the Nagle algorithm. (boolean value)
+# Deprecated group/name - [DEFAULT]/qpid_tcp_nodelay
+#qpid_tcp_nodelay = true
+
+# The number of prefetched messages held by receiver. (integer value)
+# Deprecated group/name - [DEFAULT]/qpid_receiver_capacity
+#qpid_receiver_capacity = 1
+
+# The qpid topology version to use. Version 1 is what was originally used by
+# impl_qpid. Version 2 includes some backwards-incompatible changes that allow
+# broker federation to work. Users should update to version 2 when they are
+# able to take everything down, as it requires a clean break. (integer value)
+# Deprecated group/name - [DEFAULT]/qpid_topology_version
+#qpid_topology_version = 1
+
+
+[oslo_messaging_rabbit]
+
+#
+# From oslo.messaging
+#
+
+# Use durable queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
+#amqp_durable_queues = false
+
+# Auto-delete queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/amqp_auto_delete
+#amqp_auto_delete = false
+
+# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
+# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
+# distributions. (string value)
+# Deprecated group/name - [DEFAULT]/kombu_ssl_version
+#kombu_ssl_version =
+
+# SSL key file (valid only if SSL enabled). (string value)
+# Deprecated group/name - [DEFAULT]/kombu_ssl_keyfile
+#kombu_ssl_keyfile =
+
+# SSL cert file (valid only if SSL enabled). (string value)
+# Deprecated group/name - [DEFAULT]/kombu_ssl_certfile
+#kombu_ssl_certfile =
+
+# SSL certification authority file (valid only if SSL enabled). (string value)
+# Deprecated group/name - [DEFAULT]/kombu_ssl_ca_certs
+#kombu_ssl_ca_certs =
+
+# How long to wait before reconnecting in response to an AMQP consumer cancel
+# notification. (floating point value)
+# Deprecated group/name - [DEFAULT]/kombu_reconnect_delay
+#kombu_reconnect_delay = 1.0
+
+# The RabbitMQ broker address where a single node is used. (string value)
+# Deprecated group/name - [DEFAULT]/rabbit_host
+rabbit_host = {{ server.message_queue.host }}
+
+# The RabbitMQ broker port where a single node is used.
+# (integer value)
+rabbit_port = {{ server.message_queue.port }}
+
+# RabbitMQ HA cluster host:port pairs. (list value)
+#rabbit_hosts=$rabbit_host:$rabbit_port
+
+# Connect over SSL for RabbitMQ. (boolean value)
+#rabbit_use_ssl=false
+
+# The RabbitMQ userid. (string value)
+rabbit_userid = {{ server.message_queue.user }}
+
+# The RabbitMQ password. (string value)
+rabbit_password = {{ server.message_queue.password }}
+
+# The RabbitMQ login method. (string value)
+#rabbit_login_method=AMQPLAIN
+
+# The RabbitMQ virtual host. (string value)
+rabbit_virtual_host = {{ server.message_queue.virtual_host }}
+
+# How frequently to retry connecting with RabbitMQ. (integer
+# value)
+#rabbit_retry_interval=1
+
+# How long to backoff for between retries when connecting to
+# RabbitMQ. (integer value)
+#rabbit_retry_backoff=2
+
+# Maximum number of RabbitMQ connection retries. Default is 0
+# (infinite retry count). (integer value)
+#rabbit_max_retries=0
+
+# Use HA queues in RabbitMQ (x-ha-policy: all). If you change
+# this option, you must wipe the RabbitMQ database. (boolean
+# value)
+rabbit_ha_queues={{ server.message_queue.ha_queues }}
+
+#rabbit_host = localhost
+
+# The RabbitMQ broker port where a single node is used. (integer value)
+# Deprecated group/name - [DEFAULT]/rabbit_port
+#rabbit_port = 5672
+
+# RabbitMQ HA cluster host:port pairs. (list value)
+# Deprecated group/name - [DEFAULT]/rabbit_hosts
+#rabbit_hosts = $rabbit_host:$rabbit_port
+
+# Connect over SSL for RabbitMQ. (boolean value)
+# Deprecated group/name - [DEFAULT]/rabbit_use_ssl
+#rabbit_use_ssl = false
+
+# The RabbitMQ userid. (string value)
+# Deprecated group/name - [DEFAULT]/rabbit_userid
+#rabbit_userid = guest
+
+# The RabbitMQ password. (string value)
+# Deprecated group/name - [DEFAULT]/rabbit_password
+#rabbit_password = guest
+
+# The RabbitMQ login method. (string value)
+# Deprecated group/name - [DEFAULT]/rabbit_login_method
+#rabbit_login_method = AMQPLAIN
+
+# The RabbitMQ virtual host. (string value)
+# Deprecated group/name - [DEFAULT]/rabbit_virtual_host
+#rabbit_virtual_host = /
+
+# How frequently to retry connecting with RabbitMQ. (integer value)
+#rabbit_retry_interval = 1
+
+# How long to backoff for between retries when connecting to RabbitMQ. (integer
+# value)
+# Deprecated group/name - [DEFAULT]/rabbit_retry_backoff
+#rabbit_retry_backoff = 2
+
+# Maximum number of RabbitMQ connection retries. Default is 0 (infinite retry
+# count). (integer value)
+# Deprecated group/name - [DEFAULT]/rabbit_max_retries
+#rabbit_max_retries = 0
+
+# Use HA queues in RabbitMQ (x-ha-policy: all). If you change this option, you
+# must wipe the RabbitMQ database. (boolean value)
+# Deprecated group/name - [DEFAULT]/rabbit_ha_queues
+#rabbit_ha_queues = false
+
+# Number of seconds after which the Rabbit broker is considered down if
+# heartbeat's keep-alive fails (0 disable the heartbeat). (integer value)
+#heartbeat_timeout_threshold = 60
+
+# How often times during the heartbeat_timeout_threshold we check the
+# heartbeat. (integer value)
+#heartbeat_rate = 2
+
+# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake (boolean value)
+# Deprecated group/name - [DEFAULT]/fake_rabbit
+#fake_rabbit = false
+
+[ec2authtoken]
+
+#
+# Options defined in heat.api.aws.ec2token
+#
+
+# Authentication Endpoint URI. (string value)
+auth_uri=http://{{ server.identity.host }}:5000/v2.0
+
+# Allow orchestration of multiple clouds. (boolean value)
+#multi_cloud=false
+
+# Allowed keystone endpoints for auth_uri when multi_cloud is
+# enabled. At least one endpoint needs to be specified. (list
+# value)
+#allowed_auth_uris=
+
+keystone_ec2_uri=http://{{ server.identity.host }}:5000/v2.0/ec2tokens
+
+{%- if pillar.get('opencontrail', {}).get('client', {}).get('enabled', False) %}
+
+{%- from "opencontrail/map.jinja" import client with context %}
+
+[clients_contrail]
+
+user={{ client.identity.user }}
+password={{ client.identity.password }}
+tenant={{ client.identity.tenant }}
+auth_host_ip={{ client.identity.host }}
+api_server={{ client.api.host }}
+api_port={{ client.api.port }}
+
+{%- endif %}
diff --git a/heat/files/liberty/heat.conf.RedHat b/heat/files/liberty/heat.conf.RedHat
new file mode 120000
index 0000000..08e351a
--- /dev/null
+++ b/heat/files/liberty/heat.conf.RedHat
@@ -0,0 +1 @@
+heat.conf.Debian
\ No newline at end of file
diff --git a/heat/files/sensu.conf b/heat/files/sensu.conf
new file mode 100644
index 0000000..6389b93
--- /dev/null
+++ b/heat/files/sensu.conf
@@ -0,0 +1,18 @@
+local_heat_api_cfn_proc:
+ command: "PATH=$PATH:/usr/lib64/nagios/plugins:/usr/lib/nagios/plugins check_procs -C heat-api-cfn -u heat -c 1:10"
+ interval: 60
+ occurrences: 1
+ subscribers:
+ - local-heat-server
+local_heat_engine:
+ command: "PATH=$PATH:/usr/lib64/nagios/plugins:/usr/lib/nagios/plugins check_procs -C heat-engine -u heat -c 1:20"
+ interval: 60
+ occurrences: 1
+ subscribers:
+ - local-heat-server
+local_heat_api:
+ command: "PATH=$PATH:/usr/lib64/nagios/plugins:/usr/lib/nagios/plugins check_procs -C heat-api -u heat -c 1:10"
+ interval: 60
+ occurrences: 1
+ subscribers:
+ - local-heat-server
\ No newline at end of file
diff --git a/heat/init.sls b/heat/init.sls
new file mode 100644
index 0000000..3ed5ba1
--- /dev/null
+++ b/heat/init.sls
@@ -0,0 +1,9 @@
+{%- if pillar.heat is defined %}
+include:
+{%- if pillar.heat.server is defined %}
+- heat.server
+{%- endif %}
+{%- if pillar.heat.client is defined %}
+- heat.client
+{%- endif %}
+{%- endif %}
\ No newline at end of file
diff --git a/heat/map.jinja b/heat/map.jinja
new file mode 100644
index 0000000..518eef3
--- /dev/null
+++ b/heat/map.jinja
@@ -0,0 +1,22 @@
+
+{% set server = salt['grains.filter_by']({
+ 'Debian': {
+ 'pkgs': ['heat-api', 'heat-api-cfn', 'heat-api-cloudwatch', 'heat-engine', 'heat-common','python-heatclient'],
+ 'services': ['heat-api', 'heat-api-cfn', 'heat-api-cloudwatch', 'heat-engine'],
+ 'notification': False
+ },
+ 'RedHat': {
+ 'pkgs': ['openstack-heat-api', 'openstack-heat-api-cfn', 'openstack-heat-api-cloudwatch', 'openstack-heat-engine', 'openstack-heat-common'],
+ 'services': ['openstack-heat-api', 'openstack-heat-api-cfn', 'openstack-heat-api-cloudwatch', 'openstack-heat-engine'],
+ 'notification': False
+ },
+}, merge=salt['pillar.get']('heat:server')) %}
+
+{% set client = salt['grains.filter_by']({
+ 'Debian': {
+ 'pkgs': ['python-heatclient'],
+ },
+ 'RedHat': {
+ 'pkgs': ['python-heatclient'],
+ },
+}, merge=salt['pillar.get']('heat:client')) %}
diff --git a/heat/meta/sensu.yml b/heat/meta/sensu.yml
new file mode 100644
index 0000000..80712a9
--- /dev/null
+++ b/heat/meta/sensu.yml
@@ -0,0 +1,25 @@
+check:
+ local_heat_api_cfn_proc:
+ command: "PATH=$PATH:/usr/lib64/nagios/plugins:/usr/lib/nagios/plugins check_procs -C heat-api-cfn -u heat -c 1:10"
+ interval: 60
+ occurrences: 1
+ subscribers:
+ - local-heat-server
+ local_heat_engine:
+ command: "PATH=$PATH:/usr/lib64/nagios/plugins:/usr/lib/nagios/plugins check_procs -C heat-engine -u heat -c 1:20"
+ interval: 60
+ occurrences: 1
+ subscribers:
+ - local-heat-server
+ local_heat_api:
+ command: "PATH=$PATH:/usr/lib64/nagios/plugins:/usr/lib/nagios/plugins check_procs -C heat-api -u heat -c 1:10"
+ interval: 60
+ occurrences: 1
+ subscribers:
+ - local-heat-server
+ remote_heat_stack_create:
+ command: "PATH=$PATH:/usr/local/bin check_heat-stack.py --auth_url http://:::openstack.host::::35357/v2.0/ --username :::openstack.user::: --password :::openstack.password::: --tenant :::openstack.tenant::: --template check_heat-stack.hot"
+ interval: 300
+ occurrences: 1
+ subscribers:
+ - remote-network
\ No newline at end of file
diff --git a/heat/meta/sphinx.yml b/heat/meta/sphinx.yml
new file mode 100644
index 0000000..d3dbbe2
--- /dev/null
+++ b/heat/meta/sphinx.yml
@@ -0,0 +1,51 @@
+doc:
+ name: Heat
+ description: Heat implements an orchestration engine to launch multiple composite cloud applications based on templates in the form of text files that can be treated like code.
+ role:
+ {%- if pillar.heat.server is defined %}
+ {%- from "heat/map.jinja" import server with context %}
+ server:
+ name: server
+ endpoint:
+ heat_api:
+ name: heat-api
+ type: heat-api
+ address: http://{{ server.bind.api.address }}:8004
+ protocol: http
+ heat_api_cfn:
+ name: heat-api-cfn
+ type: heat-api-cfn
+ address: http://{{ server.bind.api_cfn.address }}:8003
+ protocol: http
+ heat_api_cloudwatch:
+ name: heat-api-cloudwatch
+ type: heat-api-cloudwatch
+ address: http://{{ server.bind.api_cloudwatch.address }}:8000
+ protocol: http
+ param:
+ bind:
+ value: {{ server.bind.api.address }}:8004
+ version:
+ name: "Version"
+ value: {{ server.version }}
+ database_host:
+ name: "Database"
+ value: {{ server.database.user }}@{{ server.database.host }}:{{ server.database.port }}//{{ server.database.name }}
+ message_queue_ip:
+ name: "Message queue"
+ value: {{ server.message_queue.user }}@{{ server.message_queue.host }}:{{ server.message_queue.port }}{{ server.message_queue.virtual_host }}
+ identity_host:
+ name: "Identity service"
+ value: {{ server.identity.user }}@{{ server.identity.host }}:{{ server.identity.port }}
+ packages:
+ value: |
+ {%- for pkg in server.pkgs %}
+ {%- set pkg_version = "dpkg -l "+pkg+" | grep "+pkg+" | awk '{print $3}'" %}
+ * {{ pkg }}: {{ salt['cmd.run'](pkg_version) }}
+ {%- endfor %}
+ {%- endif %}
+ {%- if pillar.heat.client is defined %}
+ client:
+ name: client
+ param: {}
+ {%- endif %}
diff --git a/heat/server.sls b/heat/server.sls
new file mode 100644
index 0000000..b247463
--- /dev/null
+++ b/heat/server.sls
@@ -0,0 +1,70 @@
+{%- from "heat/map.jinja" import server with context %}
+{%- if server.enabled %}
+
+heat_server_packages:
+ pkg.installed:
+ - names: {{ server.pkgs }}
+
+/etc/heat/heat.conf:
+ file.managed:
+ - source: salt://heat/files/{{ server.version }}/heat.conf.{{ grains.os_family }}
+ - template: jinja
+ - require:
+ - pkg: heat_server_packages
+
+/etc/heat/api-paste.ini:
+ file.managed:
+ - source: salt://heat/files/{{ server.version }}/api-paste.ini
+ - template: jinja
+ - require:
+ - pkg: heat_server_packages
+
+heat_client_roles:
+ keystone.role_present:
+ - names:
+ - heat_stack_owner
+ - heat_stack_user
+ - require:
+ - pkg: heat_server_packages
+
+{%- if server.version != 'juno' %}
+
+heat_keystone_setup:
+ cmd.run:
+ - name: 'source /root/keystonercv3; heat-keystone-setup-domain --stack-user-domain-name heat_user_domain --stack-domain-admin heat_domain_admin --stack-domain-admin-password {{ server.stack_domain_admin.password }}'
+ - shell: /bin/bash
+ - require:
+ - file: /etc/heat/heat.conf
+ - pkg: heat_server_packages
+ - require_in:
+ - cmd: heat_syncdb
+
+{%- endif %}
+
+heat_syncdb:
+ cmd.run:
+ - name: heat-manage db_sync
+ - require:
+ - file: /etc/heat/heat.conf
+ - pkg: heat_server_packages
+
+heat_log_access:
+ cmd.run:
+ - name: chown heat:heat /var/log/heat/ -R
+ - require:
+ - file: /etc/heat/heat.conf
+ - pkg: heat_server_packages
+ - require_in:
+ - service: heat_server_services
+
+heat_server_services:
+ service.running:
+ - names: {{ server.services }}
+ - enable: true
+ - require:
+ - cmd: heat_syncdb
+ - watch:
+ - file: /etc/heat/heat.conf
+ - file: /etc/heat/api-paste.ini
+
+{%- endif %}
diff --git a/metadata.yml b/metadata.yml
new file mode 100644
index 0000000..720f1de
--- /dev/null
+++ b/metadata.yml
@@ -0,0 +1,3 @@
+name: "heat"
+version: "2016.4.1"
+source: "https://github.com/openstack/salt-formula-heat"
diff --git a/metadata/service/client/init.yml b/metadata/service/client/init.yml
new file mode 100644
index 0000000..c5f35d0
--- /dev/null
+++ b/metadata/service/client/init.yml
@@ -0,0 +1,8 @@
+parameters:
+ heat:
+ client:
+ enabled: true
+ source:
+ engine: git
+ address: ${_param:heat_data_repository}
+ revision: ${_param:heat_data_revision}
diff --git a/metadata/service/server/cluster.yml b/metadata/service/server/cluster.yml
new file mode 100644
index 0000000..b688139
--- /dev/null
+++ b/metadata/service/server/cluster.yml
@@ -0,0 +1,52 @@
+applications:
+- heat
+classes:
+- service.heat.support
+parameters:
+ heat:
+ server:
+ stack_domain_admin:
+ name: heat_domain_admin
+ password: ${_param:heat_domain_admin_password}
+ domain: heat
+ enabled: true
+ region: RegionOne
+ version: ${_param:heat_version}
+ bind:
+ api_cfn:
+ address: ${_param:cluster_local_address}
+ api_cloudwatch:
+ address: ${_param:cluster_local_address}
+ api:
+ address: ${_param:cluster_local_address}
+ database:
+ engine: mysql
+ host: ${_param:cluster_vip_address}
+ port: 3306
+ name: heat
+ user: heat
+ password: ${_param:mysql_heat_password}
+ metadata:
+ host: ${_param:cluster_vip_address}
+ port: 8000
+ waitcondition:
+ host: ${_param:cluster_vip_address}
+ port: 8000
+ watch:
+ host: ${_param:cluster_vip_address}
+ port: 8003
+ identity:
+ engine: keystone
+ host: ${_param:cluster_vip_address}
+ port: 35357
+ tenant: service
+ user: heat
+ password: ${_param:keystone_heat_password}
+ message_queue:
+ engine: rabbitmq
+ host: ${_param:cluster_vip_address}
+ port: 5672
+ user: openstack
+ password: ${_param:rabbitmq_openstack_password}
+ virtual_host: '/openstack'
+ ha_queues: true
diff --git a/metadata/service/server/single.yml b/metadata/service/server/single.yml
new file mode 100644
index 0000000..082e429
--- /dev/null
+++ b/metadata/service/server/single.yml
@@ -0,0 +1,52 @@
+applications:
+- heat
+classes:
+- service.heat.support
+parameters:
+ heat:
+ server:
+ stack_domain_admin:
+ name: heat_domain_admin
+ password: ${_param:heat_domain_admin_password}
+ domain: heat
+ enabled: true
+ region: RegionOne
+ version: ${_param:heat_version}
+ bind:
+ api_cfn:
+ address: 0.0.0.0
+ api_cloudwatch:
+ address: 0.0.0.0
+ api:
+ address: ${_param:single_address}
+ database:
+ engine: mysql
+ host: ${_param:single_address}
+ port: 3306
+ name: heat
+ user: heat
+ password: ${_param:mysql_heat_password}
+ metadata:
+ host: ${_param:single_address}
+ port: 8000
+ waitcondition:
+ host: ${_param:single_address}
+ port: 8000
+ watch:
+ host: ${_param:single_address}
+ port: 8003
+ identity:
+ engine: keystone
+ host: ${_param:single_address}
+ port: 35357
+ tenant: service
+ user: heat
+ password: ${_param:keystone_heat_password}
+ message_queue:
+ engine: rabbitmq
+ host: ${_param:single_address}
+ port: 5672
+ user: openstack
+ password: ${_param:rabbitmq_openstack_password}
+ virtual_host: '/openstack'
+ ha_queues: true
diff --git a/metadata/service/support.yml b/metadata/service/support.yml
new file mode 100644
index 0000000..994f93f
--- /dev/null
+++ b/metadata/service/support.yml
@@ -0,0 +1,11 @@
+parameters:
+ heat:
+ _support:
+ collectd:
+ enabled: false
+ heka:
+ enabled: false
+ sensu:
+ enabled: true
+ sphinx:
+ enabled: true
diff --git a/other-requirements.txt b/other-requirements.txt
new file mode 100644
index 0000000..ba84cc5
--- /dev/null
+++ b/other-requirements.txt
@@ -0,0 +1 @@
+python-yaml
diff --git a/tests/pillar/server_cluster.sls b/tests/pillar/server_cluster.sls
new file mode 100644
index 0000000..ef6a978
--- /dev/null
+++ b/tests/pillar/server_cluster.sls
@@ -0,0 +1,47 @@
+heat:
+ server:
+ enabled: true
+ region: RegionOne
+ version: liberty
+ stack_domain_admin:
+ name: heat_domain_admin
+ password: password
+ domain: heat
+ bind:
+ api_cfn:
+ address: 127.0.0.1
+ api_cloudwatch:
+ address: 127.0.0.1
+ api:
+ address: 127.0.0.1
+ database:
+ engine: mysql
+ host: 127.0.0.1
+ port: 3306
+ name: heat
+ user: heat
+ password: password
+ metadata:
+ host: 127.0.0.1
+ port: 8000
+ waitcondition:
+ host: 127.0.0.1
+ port: 8000
+ watch:
+ host: 127.0.0.1
+ port: 8003
+ identity:
+ engine: keystone
+ host: 127.0.0.1
+ port: 35357
+ tenant: service
+ user: heat
+ password: password
+ message_queue:
+ engine: rabbitmq
+ host: 127.0.0.1
+ port: 5672
+ user: openstack
+ password: password
+ virtual_host: '/openstack'
+ ha_queues: true
\ No newline at end of file
diff --git a/tests/pillar/server_single.sls b/tests/pillar/server_single.sls
new file mode 100644
index 0000000..667fc69
--- /dev/null
+++ b/tests/pillar/server_single.sls
@@ -0,0 +1,47 @@
+heat:
+ server:
+ enabled: true
+ region: RegionOne
+ version: liberty
+ stack_domain_admin:
+ name: heat_domain_admin
+ password: password
+ domain: heat
+ bind:
+ api_cfn:
+ address: 0.0.0.0
+ api_cloudwatch:
+ address: 0.0.0.0
+ api:
+ address: 127.0.0.1
+ database:
+ engine: mysql
+ host: 127.0.0.1
+ port: 3306
+ name: heat
+ user: heat
+ password: password
+ metadata:
+ host: 127.0.0.1
+ port: 8000
+ waitcondition:
+ host: 127.0.0.1
+ port: 8000
+ watch:
+ host: 127.0.0.1
+ port: 8003
+ identity:
+ engine: keystone
+ host: 127.0.0.1
+ port: 35357
+ tenant: service
+ user: heat
+ password: password
+ message_queue:
+ engine: rabbitmq
+ host: 127.0.0.1
+ port: 5672
+ user: openstack
+ password: password
+ virtual_host: '/openstack'
+ ha_queues: true
\ No newline at end of file
diff --git a/tests/run_tests.sh b/tests/run_tests.sh
new file mode 100755
index 0000000..3f42101
--- /dev/null
+++ b/tests/run_tests.sh
@@ -0,0 +1,162 @@
+#!/usr/bin/env bash
+
+set -e
+[ -n "$DEBUG" ] && set -x
+
+CURDIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )"
+METADATA=${CURDIR}/../metadata.yml
+FORMULA_NAME=$(cat $METADATA | python -c "import sys,yaml; print yaml.load(sys.stdin)['name']")
+
+## Overrideable parameters
+PILLARDIR=${PILLARDIR:-${CURDIR}/pillar}
+BUILDDIR=${BUILDDIR:-${CURDIR}/build}
+VENV_DIR=${VENV_DIR:-${BUILDDIR}/virtualenv}
+DEPSDIR=${BUILDDIR}/deps
+
+SALT_FILE_DIR=${SALT_FILE_DIR:-${BUILDDIR}/file_root}
+SALT_PILLAR_DIR=${SALT_PILLAR_DIR:-${BUILDDIR}/pillar_root}
+SALT_CONFIG_DIR=${SALT_CONFIG_DIR:-${BUILDDIR}/salt}
+SALT_CACHE_DIR=${SALT_CACHE_DIR:-${SALT_CONFIG_DIR}/cache}
+
+SALT_OPTS="${SALT_OPTS} --retcode-passthrough --local -c ${SALT_CONFIG_DIR}"
+
+if [ "x${SALT_VERSION}" != "x" ]; then
+ PIP_SALT_VERSION="==${SALT_VERSION}"
+fi
+
+## Functions
+log_info() {
+ echo "[INFO] $*"
+}
+
+log_err() {
+ echo "[ERROR] $*" >&2
+}
+
+setup_virtualenv() {
+ log_info "Setting up Python virtualenv"
+ virtualenv $VENV_DIR
+ source ${VENV_DIR}/bin/activate
+ pip install salt${PIP_SALT_VERSION}
+}
+
+setup_pillar() {
+ [ ! -d ${SALT_PILLAR_DIR} ] && mkdir -p ${SALT_PILLAR_DIR}
+ echo "base:" > ${SALT_PILLAR_DIR}/top.sls
+ for pillar in ${PILLARDIR}/*; do
+ state_name=$(basename ${pillar%.sls})
+ echo -e " ${state_name}:\n - ${state_name}" >> ${SALT_PILLAR_DIR}/top.sls
+ done
+}
+
+setup_salt() {
+ [ ! -d ${SALT_FILE_DIR} ] && mkdir -p ${SALT_FILE_DIR}
+ [ ! -d ${SALT_CONFIG_DIR} ] && mkdir -p ${SALT_CONFIG_DIR}
+ [ ! -d ${SALT_CACHE_DIR} ] && mkdir -p ${SALT_CACHE_DIR}
+
+ echo "base:" > ${SALT_FILE_DIR}/top.sls
+ for pillar in ${PILLARDIR}/*.sls; do
+ state_name=$(basename ${pillar%.sls})
+ echo -e " ${state_name}:\n - ${FORMULA_NAME}" >> ${SALT_FILE_DIR}/top.sls
+ done
+
+ cat << EOF > ${SALT_CONFIG_DIR}/minion
+file_client: local
+cachedir: ${SALT_CACHE_DIR}
+verify_env: False
+
+file_roots:
+ base:
+ - ${SALT_FILE_DIR}
+ - ${CURDIR}/..
+ - /usr/share/salt-formulas/env
+
+pillar_roots:
+ base:
+ - ${SALT_PILLAR_DIR}
+ - ${PILLARDIR}
+EOF
+}
+
+fetch_dependency() {
+ dep_name="$(echo $1|cut -d : -f 1)"
+ dep_source="$(echo $1|cut -d : -f 2-)"
+ dep_root="${DEPSDIR}/$(basename $dep_source .git)"
+ dep_metadata="${dep_root}/metadata.yml"
+
+ [ -d /usr/share/salt-formulas/env/${dep_name} ] && log_info "Dependency $dep_name already present in system-wide salt env" && return 0
+ [ -d $dep_root ] && log_info "Dependency $dep_name already fetched" && return 0
+
+ log_info "Fetching dependency $dep_name"
+ [ ! -d ${DEPSDIR} ] && mkdir -p ${DEPSDIR}
+ git clone $dep_source ${DEPSDIR}/$(basename $dep_source .git)
+ ln -s ${dep_root}/${dep_name} ${SALT_FILE_DIR}/${dep_name}
+
+ METADATA="${dep_metadata}" install_dependencies
+}
+
+install_dependencies() {
+ grep -E "^dependencies:" ${METADATA} >/dev/null || return 0
+ (python - | while read dep; do fetch_dependency "$dep"; done) << EOF
+import sys,yaml
+for dep in yaml.load(open('${METADATA}', 'ro'))['dependencies']:
+ print '%s:%s' % (dep["name"], dep["source"])
+EOF
+}
+
+clean() {
+ log_info "Cleaning up ${BUILDDIR}"
+ [ -d ${BUILDDIR} ] && rm -rf ${BUILDDIR} || exit 0
+}
+
+salt_run() {
+ [ -e ${VEN_DIR}/bin/activate ] && source ${VENV_DIR}/bin/activate
+ salt-call ${SALT_OPTS} $*
+}
+
+prepare() {
+ [ -d ${BUILDDIR} ] && mkdir -p ${BUILDDIR}
+
+ which salt-call || setup_virtualenv
+ setup_pillar
+ setup_salt
+ install_dependencies
+}
+
+run() {
+ for pillar in ${PILLARDIR}/*.sls; do
+ state_name=$(basename ${pillar%.sls})
+ salt_run --id=${state_name} state.show_sls ${FORMULA_NAME} || (log_err "Execution of ${FORMULA_NAME}.${state_name} failed"; exit 1)
+ done
+}
+
+_atexit() {
+ RETVAL=$?
+ trap true INT TERM EXIT
+
+ if [ $RETVAL -ne 0 ]; then
+ log_err "Execution failed"
+ else
+ log_info "Execution successful"
+ fi
+ return $RETVAL
+}
+
+## Main
+trap _atexit INT TERM EXIT
+
+case $1 in
+ clean)
+ clean
+ ;;
+ prepare)
+ prepare
+ ;;
+ run)
+ run
+ ;;
+ *)
+ prepare
+ run
+ ;;
+esac