diff --git a/glance/files/rocky/glance-api-paste.ini b/glance/files/rocky/glance-api-paste.ini
new file mode 100644
index 0000000..3c208ce
--- /dev/null
+++ b/glance/files/rocky/glance-api-paste.ini
@@ -0,0 +1,97 @@
+{%- from "glance/map.jinja" import server with context %}
+# Use this pipeline for no auth or image caching - DEFAULT
+[pipeline:glance-api]
+pipeline = cors healthcheck http_proxy_to_wsgi versionnegotiation osprofiler unauthenticated-context {% if server.audit.enabled %}audit {% endif %}rootapp
+
+# Use this pipeline for image caching and no auth
+[pipeline:glance-api-caching]
+pipeline = cors healthcheck http_proxy_to_wsgi versionnegotiation osprofiler unauthenticated-context cache {% if server.audit.enabled %}audit {% endif %}rootapp
+
+# Use this pipeline for caching w/ management interface but no auth
+[pipeline:glance-api-cachemanagement]
+pipeline = cors healthcheck http_proxy_to_wsgi versionnegotiation osprofiler {% if server.audit.enabled %}audit {% endif %}unauthenticated-context cache cachemanage rootapp
+
+# Use this pipeline for keystone auth
+[pipeline:glance-api-keystone]
+pipeline = cors healthcheck http_proxy_to_wsgi versionnegotiation osprofiler authtoken {% if server.audit.enabled %}audit {% endif %}context rootapp
+
+# Use this pipeline for keystone auth with image caching
+[pipeline:glance-api-keystone+caching]
+pipeline = cors healthcheck http_proxy_to_wsgi versionnegotiation osprofiler authtoken {% if server.audit.enabled %}audit {% endif %}context cache rootapp
+
+# Use this pipeline for keystone auth with caching and cache management
+[pipeline:glance-api-keystone+cachemanagement]
+pipeline = cors healthcheck http_proxy_to_wsgi versionnegotiation osprofiler authtoken {% if server.audit.enabled %}audit {% endif %}context cache cachemanage rootapp
+
+# Use this pipeline for authZ only. This means that the registry will treat a
+# user as authenticated without making requests to keystone to reauthenticate
+# the user.
+[pipeline:glance-api-trusted-auth]
+pipeline = cors healthcheck http_proxy_to_wsgi versionnegotiation osprofiler {% if server.audit.enabled %}audit {% endif %}context rootapp
+
+# Use this pipeline for authZ only. This means that the registry will treat a
+# user as authenticated without making requests to keystone to reauthenticate
+# the user and uses cache management
+[pipeline:glance-api-trusted-auth+cachemanagement]
+pipeline = cors healthcheck http_proxy_to_wsgi versionnegotiation osprofiler {% if server.audit.enabled %}audit {% endif %}context cache cachemanage rootapp
+
+[composite:rootapp]
+paste.composite_factory = glance.api:root_app_factory
+/: apiversions
+/v1: apiv1app
+/v2: apiv2app
+
+[app:apiversions]
+paste.app_factory = glance.api.versions:create_resource
+
+[app:apiv1app]
+paste.app_factory = glance.api.v1.router:API.factory
+
+[app:apiv2app]
+paste.app_factory = glance.api.v2.router:API.factory
+
+[filter:healthcheck]
+paste.filter_factory = oslo_middleware:Healthcheck.factory
+backends = disable_by_file
+disable_by_file_path = /etc/glance/healthcheck_disable
+
+[filter:versionnegotiation]
+paste.filter_factory = glance.api.middleware.version_negotiation:VersionNegotiationFilter.factory
+
+[filter:cache]
+paste.filter_factory = glance.api.middleware.cache:CacheFilter.factory
+
+[filter:cachemanage]
+paste.filter_factory = glance.api.middleware.cache_manage:CacheManageFilter.factory
+
+[filter:context]
+paste.filter_factory = glance.api.middleware.context:ContextMiddleware.factory
+
+[filter:unauthenticated-context]
+paste.filter_factory = glance.api.middleware.context:UnauthenticatedContextMiddleware.factory
+
+[filter:authtoken]
+paste.filter_factory = keystonemiddleware.auth_token:filter_factory
+delay_auth_decision = true
+
+[filter:gzip]
+paste.filter_factory = glance.api.middleware.gzip:GzipMiddleware.factory
+
+[filter:osprofiler]
+paste.filter_factory = osprofiler.web:WsgiMiddleware.factory
+hmac_keys = SECRET_KEY  #DEPRECATED
+enabled = yes  #DEPRECATED
+
+{%- if server.audit.enabled %}
+[filter:audit]
+paste.filter_factory = {{ server.get("audit", {}).get("filter_factory", "keystonemiddleware.audit:filter_factory")  }}
+audit_map_file = {{ server.get("audit", {}).get("map_file", "/etc/pycadf/glance_api_audit_map.conf") }}
+{%- endif %}
+
+[filter:cors]
+paste.filter_factory =  oslo_middleware.cors:filter_factory
+oslo_config_project = glance
+oslo_config_program = glance-api
+
+[filter:http_proxy_to_wsgi]
+paste.filter_factory = oslo_middleware:HTTPProxyToWSGI.factory
diff --git a/glance/files/rocky/glance-api.conf.Debian b/glance/files/rocky/glance-api.conf.Debian
new file mode 100644
index 0000000..73b1445
--- /dev/null
+++ b/glance/files/rocky/glance-api.conf.Debian
@@ -0,0 +1,3407 @@
+{%- from "glance/map.jinja" import server with context %}
+{% set storage_engines = server.storage.engine.split(',') %}
+[DEFAULT]
+
+#
+# From glance.api
+#
+
+# DEPRECATED:
+# Set the image owner to tenant or the authenticated user.
+#
+# Assign a boolean value to determine the owner of an image. When set to
+# True, the owner of the image is the tenant. When set to False, the
+# owner of the image will be the authenticated user issuing the request.
+# Setting it to False makes the image private to the associated user and
+# sharing with other users within the same tenant (or "project")
+# requires explicit image sharing via image membership.
+#
+# Possible values:
+#     * True
+#     * False
+#
+# Related options:
+#     * None
+#
+#  (boolean value)
+# This option is deprecated for removal since Rocky.
+# Its value may be silently ignored in the future.
+# Reason:
+# The non-default setting for this option misaligns Glance with other
+# OpenStack services with respect to resource ownership.  Further, surveys
+# indicate that this option is not used by operators.  The option will be
+# removed early in the 'S' development cycle following the standard OpenStack
+# deprecation policy.  As the option is not in wide use, no migration path is
+# proposed.
+#owner_is_tenant = true
+
+#
+# Role used to identify an authenticated user as administrator.
+#
+# Provide a string value representing a Keystone role to identify an
+# administrative user. Users with this role will be granted
+# administrative privileges. The default value for this option is
+# 'admin'.
+#
+# Possible values:
+#     * A string value which is a valid Keystone role
+#
+# Related options:
+#     * None
+#
+#  (string value)
+#admin_role = admin
+
+#
+# Allow limited access to unauthenticated users.
+#
+# Assign a boolean to determine API access for unathenticated
+# users. When set to False, the API cannot be accessed by
+# unauthenticated users. When set to True, unauthenticated users can
+# access the API with read-only privileges. This however only applies
+# when using ContextMiddleware.
+#
+# Possible values:
+#     * True
+#     * False
+#
+# Related options:
+#     * None
+#
+#  (boolean value)
+#allow_anonymous_access = false
+
+#
+# Limit the request ID length.
+#
+# Provide  an integer value to limit the length of the request ID to
+# the specified length. The default value is 64. Users can change this
+# to any ineteger value between 0 and 16384 however keeping in mind that
+# a larger value may flood the logs.
+#
+# Possible values:
+#     * Integer value between 0 and 16384
+#
+# Related options:
+#     * None
+#
+#  (integer value)
+# Minimum value: 0
+#max_request_id_length = 64
+
+#
+# Public url endpoint to use for Glance versions response.
+#
+# This is the public url endpoint that will appear in the Glance
+# "versions" response. If no value is specified, the endpoint that is
+# displayed in the version's response is that of the host running the
+# API service. Change the endpoint to represent the proxy URL if the
+# API service is running behind a proxy. If the service is running
+# behind a load balancer, add the load balancer's URL for this value.
+#
+# Possible values:
+#     * None
+#     * Proxy URL
+#     * Load balancer URL
+#
+# Related options:
+#     * None
+#
+#  (string value)
+#public_endpoint = <None>
+
+#
+# Allow users to add additional/custom properties to images.
+#
+# Glance defines a standard set of properties (in its schema) that
+# appear on every image. These properties are also known as
+# ``base properties``. In addition to these properties, Glance
+# allows users to add custom properties to images. These are known
+# as ``additional properties``.
+#
+# By default, this configuration option is set to ``True`` and users
+# are allowed to add additional properties. The number of additional
+# properties that can be added to an image can be controlled via
+# ``image_property_quota`` configuration option.
+#
+# Possible values:
+#     * True
+#     * False
+#
+# Related options:
+#     * image_property_quota
+#
+#  (boolean value)
+#allow_additional_image_properties = true
+
+# "
+# Secure hashing algorithm used for computing the 'os_hash_value' property.
+#
+# This option configures the Glance "multihash", which consists of two
+# image properties: the 'os_hash_algo' and the 'os_hash_value'.  The
+# 'os_hash_algo' will be populated by the value of this configuration
+# option, and the 'os_hash_value' will be populated by the hexdigest computed
+# when the algorithm is applied to the uploaded or imported image data.
+#
+# The value must be a valid secure hash algorithm name recognized by the
+# python 'hashlib' library.  You can determine what these are by examining
+# the 'hashlib.algorithms_available' data member of the version of the
+# library being used in your Glance installation.  For interoperability
+# purposes, however, we recommend that you use the set of secure hash
+# names supplied by the 'hashlib.algorithms_guaranteed' data member because
+# those algorithms are guaranteed to be supported by the 'hashlib' library
+# on all platforms.  Thus, any image consumer using 'hashlib' locally should
+# be able to verify the 'os_hash_value' of the image.
+#
+# The default value of 'sha512' is a performant secure hash algorithm.
+#
+# If this option is misconfigured, any attempts to store image data will fail.
+# For that reason, we recommend using the default value.
+#
+# Possible values:
+#     * Any secure hash algorithm name recognized by the Python 'hashlib'
+#       library
+#
+# Related options:
+#     * None
+#
+#  (string value)
+#hashing_algorithm = sha512
+
+{%- if server.quota is defined %}
+#
+# Maximum number of image members per image.
+#
+# This limits the maximum of users an image can be shared with. Any negative
+# value is interpreted as unlimited.
+#
+# Related options:
+#     * None
+#
+#  (integer value)
+#image_member_quota = 128
+{%- if server.quota.image_member is defined %}
+image_member_quota = {{ server.quota.image_member|default('128') }}
+{%- endif %}
+
+#
+# Maximum number of properties allowed on an image.
+#
+# This enforces an upper limit on the number of additional properties an image
+# can have. Any negative value is interpreted as unlimited.
+#
+# NOTE: This won't have any impact if additional properties are disabled. Please
+# refer to ``allow_additional_image_properties``.
+#
+# Related options:
+#     * ``allow_additional_image_properties``
+#
+#  (integer value)
+#image_property_quota = 128
+{%- if server.quota.image_property is defined %}
+image_property_quota = {{ server.quota.image_property|default('128') }}
+{%- endif %}
+
+#
+# Maximum number of tags allowed on an image.
+#
+# Any negative value is interpreted as unlimited.
+#
+# Related options:
+#     * None
+#
+#  (integer value)
+#image_tag_quota = 128
+{%- if server.quota.image_tag is defined %}
+image_tag_quota = {{ server.quota.image_tag|default('128') }}
+{%- endif %}
+
+#
+# Maximum number of locations allowed on an image.
+#
+# Any negative value is interpreted as unlimited.
+#
+# Related options:
+#     * None
+#
+#  (integer value)
+#image_location_quota = 10
+{%- if server.quota.image_location is defined %}
+image_location_quota = {{ server.quota.image_location|default('10') }}
+{%- endif %}
+
+#
+# Maximum amount of image storage per tenant.
+#
+# This enforces an upper limit on the cumulative storage consumed by all images
+# of a tenant across all stores. This is a per-tenant limit.
+#
+# The default unit for this configuration option is Bytes. However, storage
+# units can be specified using case-sensitive literals ``B``, ``KB``, ``MB``,
+# ``GB`` and ``TB`` representing Bytes, KiloBytes, MegaBytes, GigaBytes and
+# TeraBytes respectively. Note that there should not be any space between the
+# value and unit. Value ``0`` signifies no quota enforcement. Negative values
+# are invalid and result in errors.
+#
+# Possible values:
+#     * A string that is a valid concatenation of a non-negative integer
+#       representing the storage value and an optional string literal
+#       representing storage units as mentioned above.
+#
+# Related options:
+#     * None
+#
+#  (string value)
+#user_storage_quota = 0
+{%- if server.quota.user_storage is defined %}
+user_storage_quota = {{ server.quota.user_storage|default('0') }}
+{%- endif %}
+{%- endif %}
+
+# DEPRECATED:
+# Python module path of data access API.
+#
+# Specifies the path to the API to use for accessing the data model.
+# This option determines how the image catalog data will be accessed.
+#
+# Possible values:
+#     * glance.db.sqlalchemy.api
+#     * glance.db.registry.api
+#     * glance.db.simple.api
+#
+# If this option is set to ``glance.db.sqlalchemy.api`` then the image
+# catalog data is stored in and read from the database via the
+# SQLAlchemy Core and ORM APIs.
+#
+# Setting this option to ``glance.db.registry.api`` will force all
+# database access requests to be routed through the Registry service.
+# This avoids data access from the Glance API nodes for an added layer
+# of security, scalability and manageability.
+#
+# NOTE: In v2 OpenStack Images API, the registry service is optional.
+# In order to use the Registry API in v2, the option
+# ``enable_v2_registry`` must be set to ``True``.
+#
+# Finally, when this configuration option is set to
+# ``glance.db.simple.api``, image catalog data is stored in and read
+# from an in-memory data structure. This is primarily used for testing.
+#
+# Related options:
+#     * enable_v2_api
+#     * enable_v2_registry
+#
+#  (string value)
+# This option is deprecated for removal since Queens.
+# Its value may be silently ignored in the future.
+# Reason:
+# Glance registry service is deprecated for removal.
+#
+# More information can be found from the spec:
+# http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance
+# /deprecate-registry.html
+#data_api = glance.db.sqlalchemy.api
+
+#
+# The default number of results to return for a request.
+#
+# Responses to certain API requests, like list images, may return
+# multiple items. The number of results returned can be explicitly
+# controlled by specifying the ``limit`` parameter in the API request.
+# However, if a ``limit`` parameter is not specified, this
+# configuration value will be used as the default number of results to
+# be returned for any API request.
+#
+# NOTES:
+#     * The value of this configuration option may not be greater than
+#       the value specified by ``api_limit_max``.
+#     * Setting this to a very large value may slow down database
+#       queries and increase response times. Setting this to a
+#       very low value may result in poor user experience.
+#
+# Possible values:
+#     * Any positive integer
+#
+# Related options:
+#     * api_limit_max
+#
+#  (integer value)
+# Minimum value: 1
+limit_param_default = {{ server.limit_default|default('25') }}
+
+#
+# Maximum number of results that could be returned by a request.
+#
+# As described in the help text of ``limit_param_default``, some
+# requests may return multiple results. The number of results to be
+# returned are governed either by the ``limit`` parameter in the
+# request or the ``limit_param_default`` configuration option.
+# The value in either case, can't be greater than the absolute maximum
+# defined by this configuration option. Anything greater than this
+# value is trimmed down to the maximum value defined here.
+#
+# NOTE: Setting this to a very large value may slow down database
+#       queries and increase response times. Setting this to a
+#       very low value may result in poor user experience.
+#
+# Possible values:
+#     * Any positive integer
+#
+# Related options:
+#     * limit_param_default
+#
+#  (integer value)
+# Minimum value: 1
+api_limit_max = {{ server.api_limit_max|default('1000') }}
+
+#
+# Show direct image location when returning an image.
+#
+# This configuration option indicates whether to show the direct image
+# location when returning image details to the user. The direct image
+# location is where the image data is stored in backend storage. This
+# image location is shown under the image property ``direct_url``.
+#
+# When multiple image locations exist for an image, the best location
+# is displayed based on the location strategy indicated by the
+# configuration option ``location_strategy``.
+#
+# NOTES:
+#     * Revealing image locations can present a GRAVE SECURITY RISK as
+#       image locations can sometimes include credentials. Hence, this
+#       is set to ``False`` by default. Set this to ``True`` with
+#       EXTREME CAUTION and ONLY IF you know what you are doing!
+#     * If an operator wishes to avoid showing any image location(s)
+#       to the user, then both this option and
+#       ``show_multiple_locations`` MUST be set to ``False``.
+#
+# Possible values:
+#     * True
+#     * False
+#
+# Related options:
+#     * show_multiple_locations
+#     * location_strategy
+#
+#  (boolean value)
+show_image_direct_url = {{ server.get('show_image_direct_url', True)|lower }}
+
+# DEPRECATED:
+# Show all image locations when returning an image.
+#
+# This configuration option indicates whether to show all the image
+# locations when returning image details to the user. When multiple
+# image locations exist for an image, the locations are ordered based
+# on the location strategy indicated by the configuration opt
+# ``location_strategy``. The image locations are shown under the
+# image property ``locations``.
+#
+# NOTES:
+#     * Revealing image locations can present a GRAVE SECURITY RISK as
+#       image locations can sometimes include credentials. Hence, this
+#       is set to ``False`` by default. Set this to ``True`` with
+#       EXTREME CAUTION and ONLY IF you know what you are doing!
+#     * If an operator wishes to avoid showing any image location(s)
+#       to the user, then both this option and
+#       ``show_image_direct_url`` MUST be set to ``False``.
+#
+# Possible values:
+#     * True
+#     * False
+#
+# Related options:
+#     * show_image_direct_url
+#     * location_strategy
+#
+#  (boolean value)
+# This option is deprecated for removal since Newton.
+# Its value may be silently ignored in the future.
+# Reason: This option will be removed in the Pike release or later because the
+# same functionality can be achieved with greater granularity by using policies.
+# Please see the Newton release notes for more information.
+show_multiple_locations = {{ server.get('show_multiple_locations', False)|lower }}
+
+#
+# Maximum size of image a user can upload in bytes.
+#
+# An image upload greater than the size mentioned here would result
+# in an image creation failure. This configuration option defaults to
+# 1099511627776 bytes (1 TiB).
+#
+# NOTES:
+#     * This value should only be increased after careful
+#       consideration and must be set less than or equal to
+#       8 EiB (9223372036854775808).
+#     * This value must be set with careful consideration of the
+#       backend storage capacity. Setting this to a very low value
+#       may result in a large number of image failures. And, setting
+#       this to a very large value may result in faster consumption
+#       of storage. Hence, this must be set according to the nature of
+#       images created and storage capacity available.
+#
+# Possible values:
+#     * Any positive number less than or equal to 9223372036854775808
+#
+#  (integer value)
+# Minimum value: 1
+# Maximum value: 9223372036854775808
+#image_size_cap = 1099511627776
+
+#
+# Deploy the v2 OpenStack Images API.
+#
+# When this option is set to ``True``, Glance service will respond
+# to requests on registered endpoints conforming to the v2 OpenStack
+# Images API.
+#
+# NOTES:
+#     * If this option is disabled, then the ``enable_v2_registry``
+#       option, which is enabled by default, is also recommended
+#       to be disabled.
+#
+# Possible values:
+#     * True
+#     * False
+#
+# Related options:
+#     * enable_v2_registry
+#
+#  (boolean value)
+#enable_v2_api = true
+
+#
+#                     DEPRECATED FOR REMOVAL
+#  (boolean value)
+#enable_v1_registry = true
+
+# DEPRECATED:
+# Deploy the v2 API Registry service.
+#
+# When this option is set to ``True``, the Registry service
+# will be enabled in Glance for v2 API requests.
+#
+# NOTES:
+#     * Use of Registry is optional in v2 API, so this option
+#       must only be enabled if both ``enable_v2_api`` is set to
+#       ``True`` and the ``data_api`` option is set to
+#       ``glance.db.registry.api``.
+#
+#     * If deploying only the v1 OpenStack Images API, this option,
+#       which is enabled by default, should be disabled.
+#
+# Possible values:
+#     * True
+#     * False
+#
+# Related options:
+#     * enable_v2_api
+#     * data_api
+#
+#  (boolean value)
+# This option is deprecated for removal since Queens.
+# Its value may be silently ignored in the future.
+# Reason:
+# Glance registry service is deprecated for removal.
+#
+# More information can be found from the spec:
+# http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance
+# /deprecate-registry.html
+#enable_v2_registry = true
+
+#
+# Host address of the pydev server.
+#
+# Provide a string value representing the hostname or IP of the
+# pydev server to use for debugging. The pydev server listens for
+# debug connections on this address, facilitating remote debugging
+# in Glance.
+#
+# Possible values:
+#     * Valid hostname
+#     * Valid IP address
+#
+# Related options:
+#     * None
+#
+#  (host address value)
+#pydev_worker_debug_host = localhost
+
+#
+# Port number that the pydev server will listen on.
+#
+# Provide a port number to bind the pydev server to. The pydev
+# process accepts debug connections on this port and facilitates
+# remote debugging in Glance.
+#
+# Possible values:
+#     * A valid port number
+#
+# Related options:
+#     * None
+#
+#  (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#pydev_worker_debug_port = 5678
+
+#
+# AES key for encrypting store location metadata.
+#
+# Provide a string value representing the AES cipher to use for
+# encrypting Glance store metadata.
+#
+# NOTE: The AES key to use must be set to a random string of length
+# 16, 24 or 32 bytes.
+#
+# Possible values:
+#     * String value representing a valid AES key
+#
+# Related options:
+#     * None
+#
+#  (string value)
+#metadata_encryption_key = <None>
+
+#
+# Digest algorithm to use for digital signature.
+#
+# Provide a string value representing the digest algorithm to
+# use for generating digital signatures. By default, ``sha256``
+# is used.
+#
+# To get a list of the available algorithms supported by the version
+# of OpenSSL on your platform, run the command:
+# ``openssl list-message-digest-algorithms``.
+# Examples are 'sha1', 'sha256', and 'sha512'.
+#
+# NOTE: ``digest_algorithm`` is not related to Glance's image signing
+# and verification. It is only used to sign the universally unique
+# identifier (UUID) as a part of the certificate file and key file
+# validation.
+#
+# Possible values:
+#     * An OpenSSL message digest algorithm identifier
+#
+# Relation options:
+#     * None
+#
+#  (string value)
+#digest_algorithm = sha256
+
+#
+# The URL provides location where the temporary data will be stored
+#
+# This option is for Glance internal use only. Glance will save the
+# image data uploaded by the user to 'staging' endpoint during the
+# image import process.
+#
+# This option does not change the 'staging' API endpoint by any means.
+#
+# NOTE: It is discouraged to use same path as [task]/work_dir
+#
+# NOTE: 'file://<absolute-directory-path>' is the only option
+# api_image_import flow will support for now.
+#
+# NOTE: The staging path must be on shared filesystem available to all
+# Glance API nodes.
+#
+# Possible values:
+#     * String starting with 'file://' followed by absolute FS path
+#
+# Related options:
+#     * [task]/work_dir
+#
+#  (string value)
+#node_staging_uri = file:///tmp/staging/
+
+#
+# List of enabled Image Import Methods
+#
+# Both 'glance-direct' and 'web-download' are enabled by default.
+#
+# Related options:
+#     * [DEFAULT]/node_staging_uri (list value)
+#enabled_import_methods = [glance-direct,web-download]
+
+#
+# Strategy to determine the preference order of image locations.
+#
+# This configuration option indicates the strategy to determine
+# the order in which an image's locations must be accessed to
+# serve the image's data. Glance then retrieves the image data
+# from the first responsive active location it finds in this list.
+#
+# This option takes one of two possible values ``location_order``
+# and ``store_type``. The default value is ``location_order``,
+# which suggests that image data be served by using locations in
+# the order they are stored in Glance. The ``store_type`` value
+# sets the image location preference based on the order in which
+# the storage backends are listed as a comma separated list for
+# the configuration option ``store_type_preference``.
+#
+# Possible values:
+#     * location_order
+#     * store_type
+#
+# Related options:
+#     * store_type_preference
+#
+#  (string value)
+# Possible values:
+# location_order - <No description provided>
+# store_type - <No description provided>
+location_strategy = {{ server.location_strategy|default('location_order') }}
+
+#
+# The location of the property protection file.
+#
+# Provide a valid path to the property protection file which contains
+# the rules for property protections and the roles/policies associated
+# with them.
+#
+# A property protection file, when set, restricts the Glance image
+# properties to be created, read, updated and/or deleted by a specific
+# set of users that are identified by either roles or policies.
+# If this configuration option is not set, by default, property
+# protections won't be enforced. If a value is specified and the file
+# is not found, the glance-api service will fail to start.
+# More information on property protections can be found at:
+# https://docs.openstack.org/glance/latest/admin/property-protections.html
+#
+# Possible values:
+#     * Empty string
+#     * Valid path to the property protection configuration file
+#
+# Related options:
+#     * property_protection_rule_format
+#
+#  (string value)
+#property_protection_file = <None>
+
+#
+# Rule format for property protection.
+#
+# Provide the desired way to set property protection on Glance
+# image properties. The two permissible values are ``roles``
+# and ``policies``. The default value is ``roles``.
+#
+# If the value is ``roles``, the property protection file must
+# contain a comma separated list of user roles indicating
+# permissions for each of the CRUD operations on each property
+# being protected. If set to ``policies``, a policy defined in
+# policy.json is used to express property protections for each
+# of the CRUD operations. Examples of how property protections
+# are enforced based on ``roles`` or ``policies`` can be found at:
+# https://docs.openstack.org/glance/latest/admin/property-
+# protections.html#examples
+#
+# Possible values:
+#     * roles
+#     * policies
+#
+# Related options:
+#     * property_protection_file
+#
+#  (string value)
+# Possible values:
+# roles - <No description provided>
+# policies - <No description provided>
+#property_protection_rule_format = roles
+
+#
+# List of allowed exception modules to handle RPC exceptions.
+#
+# Provide a comma separated list of modules whose exceptions are
+# permitted to be recreated upon receiving exception data via an RPC
+# call made to Glance. The default list includes
+# ``glance.common.exception``, ``builtins``, and ``exceptions``.
+#
+# The RPC protocol permits interaction with Glance via calls across a
+# network or within the same system. Including a list of exception
+# namespaces with this option enables RPC to propagate the exceptions
+# back to the users.
+#
+# Possible values:
+#     * A comma separated list of valid exception modules
+#
+# Related options:
+#     * None
+#  (list value)
+#allowed_rpc_exception_modules = glance.common.exception,builtins,exceptions
+
+#
+# IP address to bind the glance servers to.
+#
+# Provide an IP address to bind the glance server to. The default
+# value is ``0.0.0.0``.
+#
+# Edit this option to enable the server to listen on one particular
+# IP address on the network card. This facilitates selection of a
+# particular network interface for the server.
+#
+# Possible values:
+#     * A valid IPv4 address
+#     * A valid IPv6 address
+#
+# Related options:
+#     * None
+#
+#  (host address value)
+bind_host = {{ server.bind.address }}
+
+#
+# Port number on which the server will listen.
+#
+# Provide a valid port number to bind the server's socket to. This
+# port is then set to identify processes and forward network messages
+# that arrive at the server. The default bind_port value for the API
+# server is 9292 and for the registry server is 9191.
+#
+# Possible values:
+#     * A valid port number (0 to 65535)
+#
+# Related options:
+#     * None
+#
+#  (port value)
+# Minimum value: 0
+# Maximum value: 65535
+bind_port = {{ server.bind.port }}
+
+#
+# Number of Glance worker processes to start.
+#
+# Provide a non-negative integer value to set the number of child
+# process workers to service requests. By default, the number of CPUs
+# available is set as the value for ``workers`` limited to 8. For
+# example if the processor count is 6, 6 workers will be used, if the
+# processor count is 24 only 8 workers will be used. The limit will only
+# apply to the default value, if 24 workers is configured, 24 is used.
+#
+# Each worker process is made to listen on the port set in the
+# configuration file and contains a greenthread pool of size 1000.
+#
+# NOTE: Setting the number of workers to zero, triggers the creation
+# of a single API process with a greenthread pool of size 1000.
+#
+# Possible values:
+#     * 0
+#     * Positive integer value (typically equal to the number of CPUs)
+#
+# Related options:
+#     * None
+#
+#  (integer value)
+# Minimum value: 0
+workers = {{ server.workers }}
+
+#
+# Maximum line size of message headers.
+#
+# Provide an integer value representing a length to limit the size of
+# message headers. The default value is 16384.
+#
+# NOTE: ``max_header_line`` may need to be increased when using large
+# tokens (typically those generated by the Keystone v3 API with big
+# service catalogs). However, it is to be kept in mind that larger
+# values for ``max_header_line`` would flood the logs.
+#
+# Setting ``max_header_line`` to 0 sets no limit for the line size of
+# message headers.
+#
+# Possible values:
+#     * 0
+#     * Positive integer
+#
+# Related options:
+#     * None
+#
+#  (integer value)
+# Minimum value: 0
+#max_header_line = 16384
+
+#
+# Set keep alive option for HTTP over TCP.
+#
+# Provide a boolean value to determine sending of keep alive packets.
+# If set to ``False``, the server returns the header
+# "Connection: close". If set to ``True``, the server returns a
+# "Connection: Keep-Alive" in its responses. This enables retention of
+# the same TCP connection for HTTP conversations instead of opening a
+# new one with each new request.
+#
+# This option must be set to ``False`` if the client socket connection
+# needs to be closed explicitly after the response is received and
+# read successfully by the client.
+#
+# Possible values:
+#     * True
+#     * False
+#
+# Related options:
+#     * None
+#
+#  (boolean value)
+#http_keepalive = true
+
+#
+# Timeout for client connections' socket operations.
+#
+# Provide a valid integer value representing time in seconds to set
+# the period of wait before an incoming connection can be closed. The
+# default value is 900 seconds.
+#
+# The value zero implies wait forever.
+#
+# Possible values:
+#     * Zero
+#     * Positive integer
+#
+# Related options:
+#     * None
+#
+#  (integer value)
+# Minimum value: 0
+#client_socket_timeout = 900
+
+#
+# Set the number of incoming connection requests.
+#
+# Provide a positive integer value to limit the number of requests in
+# the backlog queue. The default queue size is 4096.
+#
+# An incoming connection to a TCP listener socket is queued before a
+# connection can be established with the server. Setting the backlog
+# for a TCP socket ensures a limited queue size for incoming traffic.
+#
+# Possible values:
+#     * Positive integer
+#
+# Related options:
+#     * None
+#
+#  (integer value)
+# Minimum value: 1
+#backlog = 4096
+
+#
+# Set the wait time before a connection recheck.
+#
+# Provide a positive integer value representing time in seconds which
+# is set as the idle wait time before a TCP keep alive packet can be
+# sent to the host. The default value is 600 seconds.
+#
+# Setting ``tcp_keepidle`` helps verify at regular intervals that a
+# connection is intact and prevents frequent TCP connection
+# reestablishment.
+#
+# Possible values:
+#     * Positive integer value representing time in seconds
+#
+# Related options:
+#     * None
+#
+#  (integer value)
+# Minimum value: 1
+#tcp_keepidle = 600
+
+#
+# Absolute path to the CA file.
+#
+# Provide a string value representing a valid absolute path to
+# the Certificate Authority file to use for client authentication.
+#
+# A CA file typically contains necessary trusted certificates to
+# use for the client authentication. This is essential to ensure
+# that a secure connection is established to the server via the
+# internet.
+#
+# Possible values:
+#     * Valid absolute path to the CA file
+#
+# Related options:
+#     * None
+#
+#  (string value)
+#ca_file = /etc/ssl/cafile
+
+#
+# Absolute path to the certificate file.
+#
+# Provide a string value representing a valid absolute path to the
+# certificate file which is required to start the API service
+# securely.
+#
+# A certificate file typically is a public key container and includes
+# the server's public key, server name, server information and the
+# signature which was a result of the verification process using the
+# CA certificate. This is required for a secure connection
+# establishment.
+#
+# Possible values:
+#     * Valid absolute path to the certificate file
+#
+# Related options:
+#     * None
+#
+#  (string value)
+#cert_file = /etc/ssl/certs
+
+#
+# Absolute path to a private key file.
+#
+# Provide a string value representing a valid absolute path to a
+# private key file which is required to establish the client-server
+# connection.
+#
+# Possible values:
+#     * Absolute path to the private key file
+#
+# Related options:
+#     * None
+#
+#  (string value)
+#key_file = /etc/ssl/key/key-file.pem
+
+# DEPRECATED: The HTTP header used to determine the scheme for the original
+# request, even if it was removed by an SSL terminating proxy. Typical value is
+# "HTTP_X_FORWARDED_PROTO". (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Use the http_proxy_to_wsgi middleware instead.
+#secure_proxy_ssl_header = <None>
+
+{%- if server.get('image_cache', {}).get('enabled', False) %}
+#
+# The relative path to sqlite file database that will be used for image cache
+# management.
+#
+# This is a relative path to the sqlite file database that tracks the age and
+# usage statistics of image cache. The path is relative to image cache base
+# directory, specified by the configuration option ``image_cache_dir``.
+#
+# This is a lightweight database with just one table.
+#
+# Possible values:
+#     * A valid relative path to sqlite file database
+#
+# Related options:
+#     * ``image_cache_dir``
+#
+#  (string value)
+#image_cache_sqlite_db = cache.db
+
+#
+# The driver to use for image cache management.
+#
+# This configuration option provides the flexibility to choose between the
+# different image-cache drivers available. An image-cache driver is responsible
+# for providing the essential functions of image-cache like write images to/read
+# images from cache, track age and usage of cached images, provide a list of
+# cached images, fetch size of the cache, queue images for caching and clean up
+# the cache, etc.
+#
+# The essential functions of a driver are defined in the base class
+# ``glance.image_cache.drivers.base.Driver``. All image-cache drivers (existing
+# and prospective) must implement this interface. Currently available drivers
+# are ``sqlite`` and ``xattr``. These drivers primarily differ in the way they
+# store the information about cached images:
+#     * The ``sqlite`` driver uses a sqlite database (which sits on every glance
+#     node locally) to track the usage of cached images.
+#     * The ``xattr`` driver uses the extended attributes of files to store this
+#     information. It also requires a filesystem that sets ``atime`` on the files
+#     when accessed.
+#
+# Possible values:
+#     * sqlite
+#     * xattr
+#
+# Related options:
+#     * None
+#
+#  (string value)
+# Possible values:
+# sqlite - <No description provided>
+# xattr - <No description provided>
+#image_cache_driver = sqlite
+
+#
+# The upper limit on cache size, in bytes, after which the cache-pruner cleans
+# up the image cache.
+#
+# NOTE: This is just a threshold for cache-pruner to act upon. It is NOT a
+# hard limit beyond which the image cache would never grow. In fact, depending
+# on how often the cache-pruner runs and how quickly the cache fills, the image
+# cache can far exceed the size specified here very easily. Hence, care must be
+# taken to appropriately schedule the cache-pruner and in setting this limit.
+#
+# Glance caches an image when it is downloaded. Consequently, the size of the
+# image cache grows over time as the number of downloads increases. To keep the
+# cache size from becoming unmanageable, it is recommended to run the
+# cache-pruner as a periodic task. When the cache pruner is kicked off, it
+# compares the current size of image cache and triggers a cleanup if the image
+# cache grew beyond the size specified here. After the cleanup, the size of
+# cache is less than or equal to size specified here.
+#
+# Possible values:
+#     * Any non-negative integer
+#
+# Related options:
+#     * None
+#
+#  (integer value)
+# Minimum value: 0
+image_cache_max_size = {{ server.image_cache.get('max_size', '10737418240') }}
+
+#
+# The amount of time, in seconds, an incomplete image remains in the cache.
+#
+# Incomplete images are images for which download is in progress. Please see the
+# description of configuration option ``image_cache_dir`` for more detail.
+# Sometimes, due to various reasons, it is possible the download may hang and
+# the incompletely downloaded image remains in the ``incomplete`` directory.
+# This configuration option sets a time limit on how long the incomplete images
+# should remain in the ``incomplete`` directory before they are cleaned up.
+# Once an incomplete image spends more time than is specified here, it'll be
+# removed by cache-cleaner on its next run.
+#
+# It is recommended to run cache-cleaner as a periodic task on the Glance API
+# nodes to keep the incomplete images from occupying disk space.
+#
+# Possible values:
+#     * Any non-negative integer
+#
+# Related options:
+#     * None
+#
+#  (integer value)
+# Minimum value: 0
+image_cache_stall_time = {{ server.image_cache.get('stall_time', '86400') }}
+
+#
+# Base directory for image cache.
+#
+# This is the location where image data is cached and served out of. All cached
+# images are stored directly under this directory. This directory also contains
+# three subdirectories, namely, ``incomplete``, ``invalid`` and ``queue``.
+#
+# The ``incomplete`` subdirectory is the staging area for downloading images. An
+# image is first downloaded to this directory. When the image download is
+# successful it is moved to the base directory. However, if the download fails,
+# the partially downloaded image file is moved to the ``invalid`` subdirectory.
+#
+# The ``queue``subdirectory is used for queuing images for download. This is
+# used primarily by the cache-prefetcher, which can be scheduled as a periodic
+# task like cache-pruner and cache-cleaner, to cache images ahead of their
+# usage.
+# Upon receiving the request to cache an image, Glance touches a file in the
+# ``queue`` directory with the image id as the file name. The cache-prefetcher,
+# when running, polls for the files in ``queue`` directory and starts
+# downloading them in the order they were created. When the download is
+# successful, the zero-sized file is deleted from the ``queue`` directory.
+# If the download fails, the zero-sized file remains and it'll be retried the
+# next time cache-prefetcher runs.
+#
+# Possible values:
+#     * A valid path
+#
+# Related options:
+#     * ``image_cache_sqlite_db``
+#
+#  (string value)
+image_cache_dir = {{ server.image_cache.get('directory', '/var/lib/glance/image-cache/') }}
+{%- endif %}
+
+#
+# Default publisher_id for outgoing Glance notifications.
+#
+# This is the value that the notification driver will use to identify
+# messages for events originating from the Glance service. Typically,
+# this is the hostname of the instance that generated the message.
+#
+# Possible values:
+#     * Any reasonable instance identifier, for example: image.host1
+#
+# Related options:
+#     * None
+#
+#  (string value)
+#default_publisher_id = image.localhost
+
+#
+# List of notifications to be disabled.
+#
+# Specify a list of notifications that should not be emitted.
+# A notification can be given either as a notification type to
+# disable a single event notification, or as a notification group
+# prefix to disable all event notifications within a group.
+#
+# Possible values:
+#     A comma-separated list of individual notification types or
+#     notification groups to be disabled. Currently supported groups:
+#         * image
+#         * image.member
+#         * task
+#         * metadef_namespace
+#         * metadef_object
+#         * metadef_property
+#         * metadef_resource_type
+#         * metadef_tag
+#     For a complete listing and description of each event refer to:
+#     http://docs.openstack.org/developer/glance/notifications.html
+#
+#     The values must be specified as: <group_name>.<event_name>
+#     For example: image.create,task.success,metadef_tag
+#
+# Related options:
+#     * None
+#
+#  (list value)
+#disabled_notifications =
+
+# DEPRECATED:
+# Address the registry server is hosted on.
+#
+# Possible values:
+#     * A valid IP or hostname
+#
+# Related options:
+#     * None
+#
+#  (host address value)
+# This option is deprecated for removal since Queens.
+# Its value may be silently ignored in the future.
+# Reason:
+# Glance registry service is deprecated for removal.
+#
+# More information can be found from the spec:
+# http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance
+# /deprecate-registry.html
+registry_host = {{ server.registry.host }}
+
+# DEPRECATED:
+# Port the registry server is listening on.
+#
+# Possible values:
+#     * A valid port number
+#
+# Related options:
+#     * None
+#
+#  (port value)
+# Minimum value: 0
+# Maximum value: 65535
+# This option is deprecated for removal since Queens.
+# Its value may be silently ignored in the future.
+# Reason:
+# Glance registry service is deprecated for removal.
+#
+# More information can be found from the spec:
+# http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance
+# /deprecate-registry.html
+registry_port = {{ server.registry.port }}
+
+# DEPRECATED: Whether to pass through the user token when making requests to the
+# registry. To prevent failures with token expiration during big files upload,
+# it is recommended to set this parameter to False.If "use_user_token" is not in
+# effect, then admin credentials can be specified. (boolean value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: This option was considered harmful and has been deprecated in M
+# release. It will be removed in O release. For more information read OSSN-0060.
+# Related functionality with uploading big images has been implemented with
+# Keystone trusts support.
+#use_user_token = true
+
+# DEPRECATED: The administrators user name. If "use_user_token" is not in
+# effect, then admin credentials can be specified. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: This option was considered harmful and has been deprecated in M
+# release. It will be removed in O release. For more information read OSSN-0060.
+# Related functionality with uploading big images has been implemented with
+# Keystone trusts support.
+#admin_user = <None>
+
+# DEPRECATED: The administrators password. If "use_user_token" is not in effect,
+# then admin credentials can be specified. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: This option was considered harmful and has been deprecated in M
+# release. It will be removed in O release. For more information read OSSN-0060.
+# Related functionality with uploading big images has been implemented with
+# Keystone trusts support.
+#admin_password = <None>
+
+# DEPRECATED: The tenant name of the administrative user. If "use_user_token" is
+# not in effect, then admin tenant name can be specified. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: This option was considered harmful and has been deprecated in M
+# release. It will be removed in O release. For more information read OSSN-0060.
+# Related functionality with uploading big images has been implemented with
+# Keystone trusts support.
+#admin_tenant_name = <None>
+
+# DEPRECATED: The URL to the keystone service. If "use_user_token" is not in
+# effect and using keystone auth, then URL of keystone can be specified. (string
+# value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: This option was considered harmful and has been deprecated in M
+# release. It will be removed in O release. For more information read OSSN-0060.
+# Related functionality with uploading big images has been implemented with
+# Keystone trusts support.
+#auth_url = <None>
+
+# DEPRECATED: The strategy to use for authentication. If "use_user_token" is not
+# in effect, then auth strategy can be specified. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: This option was considered harmful and has been deprecated in M
+# release. It will be removed in O release. For more information read OSSN-0060.
+# Related functionality with uploading big images has been implemented with
+# Keystone trusts support.
+#auth_strategy = noauth
+
+# DEPRECATED: The region for the authentication service. If "use_user_token" is
+# not in effect and using keystone auth, then region name can be specified.
+# (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: This option was considered harmful and has been deprecated in M
+# release. It will be removed in O release. For more information read OSSN-0060.
+# Related functionality with uploading big images has been implemented with
+# Keystone trusts support.
+#auth_region = <None>
+
+# DEPRECATED:
+# Protocol to use for communication with the registry server.
+#
+# Provide a string value representing the protocol to use for
+# communication with the registry server. By default, this option is
+# set to ``http`` and the connection is not secure.
+#
+# This option can be set to ``https`` to establish a secure connection
+# to the registry server. In this case, provide a key to use for the
+# SSL connection using the ``registry_client_key_file`` option. Also
+# include the CA file and cert file using the options
+# ``registry_client_ca_file`` and ``registry_client_cert_file``
+# respectively.
+#
+# Possible values:
+#     * http
+#     * https
+#
+# Related options:
+#     * registry_client_key_file
+#     * registry_client_cert_file
+#     * registry_client_ca_file
+#
+#  (string value)
+# Possible values:
+# http - <No description provided>
+# https - <No description provided>
+# This option is deprecated for removal since Queens.
+# Its value may be silently ignored in the future.
+# Reason:
+# Glance registry service is deprecated for removal.
+#
+# More information can be found from the spec:
+# http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance
+# /deprecate-registry.html
+#registry_client_protocol = http
+
+# DEPRECATED:
+# Absolute path to the private key file.
+#
+# Provide a string value representing a valid absolute path to the
+# private key file to use for establishing a secure connection to
+# the registry server.
+#
+# NOTE: This option must be set if ``registry_client_protocol`` is
+# set to ``https``. Alternatively, the GLANCE_CLIENT_KEY_FILE
+# environment variable may be set to a filepath of the key file.
+#
+# Possible values:
+#     * String value representing a valid absolute path to the key
+#       file.
+#
+# Related options:
+#     * registry_client_protocol
+#
+#  (string value)
+# This option is deprecated for removal since Queens.
+# Its value may be silently ignored in the future.
+# Reason:
+# Glance registry service is deprecated for removal.
+#
+# More information can be found from the spec:
+# http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance
+# /deprecate-registry.html
+#registry_client_key_file = /etc/ssl/key/key-file.pem
+
+# DEPRECATED:
+# Absolute path to the certificate file.
+#
+# Provide a string value representing a valid absolute path to the
+# certificate file to use for establishing a secure connection to
+# the registry server.
+#
+# NOTE: This option must be set if ``registry_client_protocol`` is
+# set to ``https``. Alternatively, the GLANCE_CLIENT_CERT_FILE
+# environment variable may be set to a filepath of the certificate
+# file.
+#
+# Possible values:
+#     * String value representing a valid absolute path to the
+#       certificate file.
+#
+# Related options:
+#     * registry_client_protocol
+#
+#  (string value)
+# This option is deprecated for removal since Queens.
+# Its value may be silently ignored in the future.
+# Reason:
+# Glance registry service is deprecated for removal.
+#
+# More information can be found from the spec:
+# http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance
+# /deprecate-registry.html
+#registry_client_cert_file = /etc/ssl/certs/file.crt
+
+# DEPRECATED:
+# Absolute path to the Certificate Authority file.
+#
+# Provide a string value representing a valid absolute path to the
+# certificate authority file to use for establishing a secure
+# connection to the registry server.
+#
+# NOTE: This option must be set if ``registry_client_protocol`` is
+# set to ``https``. Alternatively, the GLANCE_CLIENT_CA_FILE
+# environment variable may be set to a filepath of the CA file.
+# This option is ignored if the ``registry_client_insecure`` option
+# is set to ``True``.
+#
+# Possible values:
+#     * String value representing a valid absolute path to the CA
+#       file.
+#
+# Related options:
+#     * registry_client_protocol
+#     * registry_client_insecure
+#
+#  (string value)
+# This option is deprecated for removal since Queens.
+# Its value may be silently ignored in the future.
+# Reason:
+# Glance registry service is deprecated for removal.
+#
+# More information can be found from the spec:
+# http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance
+# /deprecate-registry.html
+#registry_client_ca_file = /etc/ssl/cafile/file.ca
+
+# DEPRECATED:
+# Set verification of the registry server certificate.
+#
+# Provide a boolean value to determine whether or not to validate
+# SSL connections to the registry server. By default, this option
+# is set to ``False`` and the SSL connections are validated.
+#
+# If set to ``True``, the connection to the registry server is not
+# validated via a certifying authority and the
+# ``registry_client_ca_file`` option is ignored. This is the
+# registry's equivalent of specifying --insecure on the command line
+# using glanceclient for the API.
+#
+# Possible values:
+#     * True
+#     * False
+#
+# Related options:
+#     * registry_client_protocol
+#     * registry_client_ca_file
+#
+#  (boolean value)
+# This option is deprecated for removal since Queens.
+# Its value may be silently ignored in the future.
+# Reason:
+# Glance registry service is deprecated for removal.
+#
+# More information can be found from the spec:
+# http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance
+# /deprecate-registry.html
+#registry_client_insecure = false
+
+# DEPRECATED:
+# Timeout value for registry requests.
+#
+# Provide an integer value representing the period of time in seconds
+# that the API server will wait for a registry request to complete.
+# The default value is 600 seconds.
+#
+# A value of 0 implies that a request will never timeout.
+#
+# Possible values:
+#     * Zero
+#     * Positive integer
+#
+# Related options:
+#     * None
+#
+#  (integer value)
+# Minimum value: 0
+# This option is deprecated for removal since Queens.
+# Its value may be silently ignored in the future.
+# Reason:
+# Glance registry service is deprecated for removal.
+#
+# More information can be found from the spec:
+# http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance
+# /deprecate-registry.html
+#registry_client_timeout = 600
+
+#
+# Send headers received from identity when making requests to
+# registry.
+#
+# Typically, Glance registry can be deployed in multiple flavors,
+# which may or may not include authentication. For example,
+# ``trusted-auth`` is a flavor that does not require the registry
+# service to authenticate the requests it receives. However, the
+# registry service may still need a user context to be populated to
+# serve the requests. This can be achieved by the caller
+# (the Glance API usually) passing through the headers it received
+# from authenticating with identity for the same request. The typical
+# headers sent are ``X-User-Id``, ``X-Tenant-Id``, ``X-Roles``,
+# ``X-Identity-Status`` and ``X-Service-Catalog``.
+#
+# Provide a boolean value to determine whether to send the identity
+# headers to provide tenant and user information along with the
+# requests to registry service. By default, this option is set to
+# ``False``, which means that user and tenant information is not
+# available readily. It must be obtained by authenticating. Hence, if
+# this is set to ``False``, ``flavor`` must be set to value that
+# either includes authentication or authenticated user context.
+#
+# Possible values:
+#     * True
+#     * False
+#
+# Related options:
+#     * flavor
+#
+#  (boolean value)
+#send_identity_headers = false
+
+#
+# The amount of time, in seconds, to delay image scrubbing.
+#
+# When delayed delete is turned on, an image is put into ``pending_delete``
+# state upon deletion until the scrubber deletes its image data. Typically, soon
+# after the image is put into ``pending_delete`` state, it is available for
+# scrubbing. However, scrubbing can be delayed until a later point using this
+# configuration option. This option denotes the time period an image spends in
+# ``pending_delete`` state before it is available for scrubbing.
+#
+# It is important to realize that this has storage implications. The larger the
+# ``scrub_time``, the longer the time to reclaim backend storage from deleted
+# images.
+#
+# Possible values:
+#     * Any non-negative integer
+#
+# Related options:
+#     * ``delayed_delete``
+#
+#  (integer value)
+# Minimum value: 0
+#scrub_time = 0
+
+#
+# The size of thread pool to be used for scrubbing images.
+#
+# When there are a large number of images to scrub, it is beneficial to scrub
+# images in parallel so that the scrub queue stays in control and the backend
+# storage is reclaimed in a timely fashion. This configuration option denotes
+# the maximum number of images to be scrubbed in parallel. The default value is
+# one, which signifies serial scrubbing. Any value above one indicates parallel
+# scrubbing.
+#
+# Possible values:
+#     * Any non-zero positive integer
+#
+# Related options:
+#     * ``delayed_delete``
+#
+#  (integer value)
+# Minimum value: 1
+#scrub_pool_size = 1
+
+#
+# Turn on/off delayed delete.
+#
+# Typically when an image is deleted, the ``glance-api`` service puts the image
+# into ``deleted`` state and deletes its data at the same time. Delayed delete
+# is a feature in Glance that delays the actual deletion of image data until a
+# later point in time (as determined by the configuration option
+# ``scrub_time``).
+# When delayed delete is turned on, the ``glance-api`` service puts the image
+# into ``pending_delete`` state upon deletion and leaves the image data in the
+# storage backend for the image scrubber to delete at a later time. The image
+# scrubber will move the image into ``deleted`` state upon successful deletion
+# of image data.
+#
+# NOTE: When delayed delete is turned on, image scrubber MUST be running as a
+# periodic task to prevent the backend storage from filling up with undesired
+# usage.
+#
+# Possible values:
+#     * True
+#     * False
+#
+# Related options:
+#     * ``scrub_time``
+#     * ``wakeup_time``
+#     * ``scrub_pool_size``
+#
+#  (boolean value)
+#delayed_delete = false
+
+{%- if server.logging is defined %}
+{%- set _data = server.logging %}
+{%- include "oslo_templates/files/" ~ server.version ~ "/oslo/_log.conf" %}
+{%- endif %}
+
+{%- set _data = server.message_queue %}
+{%- include "oslo_templates/files/" ~ server.version ~ "/oslo/messaging/_default.conf" %}
+
+
+[cors]
+{%- if server.cors is defined %}
+{%- set _data = server.cors %}
+{%- include "oslo_templates/files/" ~ server.version ~ "/oslo/_cors.conf" %}
+{%- endif %}
+
+
+[database]
+{%- set _data = server.database %}
+{%- if _data.ssl is defined and 'cacert_file' not in _data.get('ssl', {}).keys() %}{% do _data['ssl'].update({'cacert_file': server.cacert_file}) %}{% endif %}
+{%- include "oslo_templates/files/" ~ server.version ~ "/oslo/_database.conf" %}
+
+
+[glance_store]
+
+#
+# From glance.store
+#
+
+# DEPRECATED:
+# List of enabled Glance stores.
+#
+# Register the storage backends to use for storing disk images
+# as a comma separated list. The default stores enabled for
+# storing disk images with Glance are ``file`` and ``http``.
+#
+# Possible values:
+#     * A comma separated list that could include:
+#         * file
+#         * http
+#         * swift
+#         * rbd
+#         * sheepdog
+#         * cinder
+#         * vmware
+#
+# Related Options:
+#     * default_store
+#
+#  (list value)
+# This option is deprecated for removal since Rocky.
+# Its value may be silently ignored in the future.
+# Reason:
+# This option is deprecated against new config option
+# ``enabled_backends`` which helps to configure multiple backend stores
+# of different schemes.
+#
+# This option is scheduled for removal in the Stein development
+# cycle.
+{%- if 'file' in storage_engines %}
+stores = file,http
+{%- else %}
+stores = {{ server.storage.engine }}
+{%- endif %}
+
+# DEPRECATED:
+# The default scheme to use for storing images.
+#
+# Provide a string value representing the default scheme to use for
+# storing images. If not set, Glance uses ``file`` as the default
+# scheme to store images with the ``file`` store.
+#
+# NOTE: The value given for this configuration option must be a valid
+# scheme for a store registered with the ``stores`` configuration
+# option.
+#
+# Possible values:
+#     * file
+#     * filesystem
+#     * http
+#     * https
+#     * swift
+#     * swift+http
+#     * swift+https
+#     * swift+config
+#     * rbd
+#     * sheepdog
+#     * cinder
+#     * vsphere
+#
+# Related Options:
+#     * stores
+#
+#  (string value)
+# Possible values:
+# file - <No description provided>
+# filesystem - <No description provided>
+# http - <No description provided>
+# https - <No description provided>
+# swift - <No description provided>
+# swift+http - <No description provided>
+# swift+https - <No description provided>
+# swift+config - <No description provided>
+# rbd - <No description provided>
+# sheepdog - <No description provided>
+# cinder - <No description provided>
+# vsphere - <No description provided>
+# This option is deprecated for removal since Rocky.
+# Its value may be silently ignored in the future.
+# Reason:
+# This option is deprecated against new config option
+# ``default_backend`` which acts similar to ``default_store`` config
+# option.
+#
+# This option is scheduled for removal in the Stein development
+# cycle.
+{%- if server.storage.default_store is defined %}
+default_store = {{ server.storage.default_store }}
+{%- elif 'file' not in storage_engines %}
+default_store = {{ storage_engines[0] }}
+{%- endif %}
+
+# DEPRECATED:
+# Minimum interval in seconds to execute updating dynamic storage
+# capabilities based on current backend status.
+#
+# Provide an integer value representing time in seconds to set the
+# minimum interval before an update of dynamic storage capabilities
+# for a storage backend can be attempted. Setting
+# ``store_capabilities_update_min_interval`` does not mean updates
+# occur periodically based on the set interval. Rather, the update
+# is performed at the elapse of this interval set, if an operation
+# of the store is triggered.
+#
+# By default, this option is set to zero and is disabled. Provide an
+# integer value greater than zero to enable this option.
+#
+# NOTE 1: For more information on store capabilities and their updates,
+# please visit: https://specs.openstack.org/openstack/glance-specs/specs/kilo
+# /store-capabilities.html
+#
+# For more information on setting up a particular store in your
+# deployment and help with the usage of this feature, please contact
+# the storage driver maintainers listed here:
+# https://docs.openstack.org/glance_store/latest/user/drivers.html
+#
+# NOTE 2: The dynamic store update capability described above is not
+# implemented by any current store drivers.  Thus, this option DOES
+# NOT DO ANYTHING (and it never has).  It is DEPRECATED and scheduled
+# for removal early in the Stein development cycle.
+#
+# Possible values:
+#     * Zero
+#     * Positive integer
+#
+# Related Options:
+#     * None
+#
+#  (integer value)
+# Minimum value: 0
+# This option is deprecated for removal since Rocky.
+# Its value may be silently ignored in the future.
+# Reason:
+# This option configures a stub method that has not been implemented
+# for any existing store drivers.  Hence it is non-operational, and
+# giving it a value does absolutely nothing.
+#
+# This option is scheduled for removal early in the Stein development
+# cycle.
+#store_capabilities_update_min_interval = 0
+
+#
+# Information to match when looking for cinder in the service catalog.
+#
+# When the ``cinder_endpoint_template`` is not set and any of
+# ``cinder_store_auth_address``, ``cinder_store_user_name``,
+# ``cinder_store_project_name``, ``cinder_store_password`` is not set,
+# cinder store uses this information to lookup cinder endpoint from the service
+# catalog in the current context. ``cinder_os_region_name``, if set, is taken
+# into consideration to fetch the appropriate endpoint.
+#
+# The service catalog can be listed by the ``openstack catalog list`` command.
+#
+# Possible values:
+#     * A string of of the following form:
+#       ``<service_type>:<service_name>:<interface>``
+#       At least ``service_type`` and ``interface`` should be specified.
+#       ``service_name`` can be omitted.
+#
+# Related options:
+#     * cinder_os_region_name
+#     * cinder_endpoint_template
+#     * cinder_store_auth_address
+#     * cinder_store_user_name
+#     * cinder_store_project_name
+#     * cinder_store_password
+#
+#  (string value)
+cinder_catalog_info = volumev2::{{ server.identity.get('endpoint_type', 'publicURL') }}
+
+#
+# Override service catalog lookup with template for cinder endpoint.
+#
+# When this option is set, this value is used to generate cinder endpoint,
+# instead of looking up from the service catalog.
+# This value is ignored if ``cinder_store_auth_address``,
+# ``cinder_store_user_name``, ``cinder_store_project_name``, and
+# ``cinder_store_password`` are specified.
+#
+# If this configuration option is set, ``cinder_catalog_info`` will be ignored.
+#
+# Possible values:
+#     * URL template string for cinder endpoint, where ``%%(tenant)s`` is
+#       replaced with the current tenant (project) name.
+#       For example: ``http://cinder.openstack.example.org/v2/%%(tenant)s``
+#
+# Related options:
+#     * cinder_store_auth_address
+#     * cinder_store_user_name
+#     * cinder_store_project_name
+#     * cinder_store_password
+#     * cinder_catalog_info
+#
+#  (string value)
+#cinder_endpoint_template = <None>
+
+#
+# Region name to lookup cinder service from the service catalog.
+#
+# This is used only when ``cinder_catalog_info`` is used for determining the
+# endpoint. If set, the lookup for cinder endpoint by this node is filtered to
+# the specified region. It is useful when multiple regions are listed in the
+# catalog. If this is not set, the endpoint is looked up from every region.
+#
+# Possible values:
+#     * A string that is a valid region name.
+#
+# Related options:
+#     * cinder_catalog_info
+#
+#  (string value)
+# Deprecated group/name - [glance_store]/os_region_name
+#cinder_os_region_name = <None>
+{% if server.identity.region is defined %}
+cinder_os_region_name = {{ server.identity.region }}
+{% endif %}
+
+#
+# Location of a CA certificates file used for cinder client requests.
+#
+# The specified CA certificates file, if set, is used to verify cinder
+# connections via HTTPS endpoint. If the endpoint is HTTP, this value is
+# ignored.
+# ``cinder_api_insecure`` must be set to ``True`` to enable the verification.
+#
+# Possible values:
+#     * Path to a ca certificates file
+#
+# Related options:
+#     * cinder_api_insecure
+#
+#  (string value)
+#cinder_ca_certificates_file = <None>
+{%- if 'cinder' in storage_engines and server.storage.cinder.get('protocol', 'http') == 'https' %}
+cinder_ca_certificates_file = {{ server.storage.cinder.get('cacert_file', server.cacert_file) }}
+{%- endif %}
+
+#
+# Number of cinderclient retries on failed http calls.
+#
+# When a call failed by any errors, cinderclient will retry the call up to the
+# specified times after sleeping a few seconds.
+#
+# Possible values:
+#     * A positive integer
+#
+# Related options:
+#     * None
+#
+#  (integer value)
+# Minimum value: 0
+#cinder_http_retries = 3
+
+#
+# Time period, in seconds, to wait for a cinder volume transition to
+# complete.
+#
+# When the cinder volume is created, deleted, or attached to the glance node to
+# read/write the volume data, the volume's state is changed. For example, the
+# newly created volume status changes from ``creating`` to ``available`` after
+# the creation process is completed. This specifies the maximum time to wait for
+# the status change. If a timeout occurs while waiting, or the status is changed
+# to an unexpected value (e.g. `error``), the image creation fails.
+#
+# Possible values:
+#     * A positive integer
+#
+# Related options:
+#     * None
+#
+#  (integer value)
+# Minimum value: 0
+#cinder_state_transition_timeout = 300
+
+#
+# Allow to perform insecure SSL requests to cinder.
+#
+# If this option is set to True, HTTPS endpoint connection is verified using the
+# CA certificates file specified by ``cinder_ca_certificates_file`` option.
+#
+# Possible values:
+#     * True
+#     * False
+#
+# Related options:
+#     * cinder_ca_certificates_file
+#
+#  (boolean value)
+#cinder_api_insecure = false
+
+#
+# The address where the cinder authentication service is listening.
+#
+# When all of ``cinder_store_auth_address``, ``cinder_store_user_name``,
+# ``cinder_store_project_name``, and ``cinder_store_password`` options are
+# specified, the specified values are always used for the authentication.
+# This is useful to hide the image volumes from users by storing them in a
+# project/tenant specific to the image service. It also enables users to share
+# the image volume among other projects under the control of glance's ACL.
+#
+# If either of these options are not set, the cinder endpoint is looked up
+# from the service catalog, and current context's user and project are used.
+#
+# Possible values:
+#     * A valid authentication service address, for example:
+#       ``http://openstack.example.org/identity/v2.0``
+#
+# Related options:
+#     * cinder_store_user_name
+#     * cinder_store_password
+#     * cinder_store_project_name
+#
+#  (string value)
+#cinder_store_auth_address = <None>
+
+#
+# User name to authenticate against cinder.
+#
+# This must be used with all the following related options. If any of these are
+# not specified, the user of the current context is used.
+#
+# Possible values:
+#     * A valid user name
+#
+# Related options:
+#     * cinder_store_auth_address
+#     * cinder_store_password
+#     * cinder_store_project_name
+#
+#  (string value)
+#cinder_store_user_name = <None>
+
+#
+# Password for the user authenticating against cinder.
+#
+# This must be used with all the following related options. If any of these are
+# not specified, the user of the current context is used.
+#
+# Possible values:
+#     * A valid password for the user specified by ``cinder_store_user_name``
+#
+# Related options:
+#     * cinder_store_auth_address
+#     * cinder_store_user_name
+#     * cinder_store_project_name
+#
+#  (string value)
+#cinder_store_password = <None>
+
+#
+# Project name where the image volume is stored in cinder.
+#
+# If this configuration option is not set, the project in current context is
+# used.
+#
+# This must be used with all the following related options. If any of these are
+# not specified, the project of the current context is used.
+#
+# Possible values:
+#     * A valid project name
+#
+# Related options:
+#     * ``cinder_store_auth_address``
+#     * ``cinder_store_user_name``
+#     * ``cinder_store_password``
+#
+#  (string value)
+#cinder_store_project_name = <None>
+
+#
+# Path to the rootwrap configuration file to use for running commands as root.
+#
+# The cinder store requires root privileges to operate the image volumes (for
+# connecting to iSCSI/FC volumes and reading/writing the volume data, etc.).
+# The configuration file should allow the required commands by cinder store and
+# os-brick library.
+#
+# Possible values:
+#     * Path to the rootwrap config file
+#
+# Related options:
+#     * None
+#
+#  (string value)
+#rootwrap_config = /etc/glance/rootwrap.conf
+
+#
+# Volume type that will be used for volume creation in cinder.
+#
+# Some cinder backends can have several volume types to optimize storage usage.
+# Adding this option allows an operator to choose a specific volume type
+# in cinder that can be optimized for images.
+#
+# If this is not set, then the default volume type specified in the cinder
+# configuration will be used for volume creation.
+#
+# Possible values:
+#     * A valid volume type from cinder
+#
+# Related options:
+#     * None
+#
+#  (string value)
+#cinder_volume_type = <None>
+
+#
+# Directory to which the filesystem backend store writes images.
+#
+# Upon start up, Glance creates the directory if it doesn't already
+# exist and verifies write access to the user under which
+# ``glance-api`` runs. If the write access isn't available, a
+# ``BadStoreConfiguration`` exception is raised and the filesystem
+# store may not be available for adding new images.
+#
+# NOTE: This directory is used only when filesystem store is used as a
+# storage backend. Either ``filesystem_store_datadir`` or
+# ``filesystem_store_datadirs`` option must be specified in
+# ``glance-api.conf``. If both options are specified, a
+# ``BadStoreConfiguration`` will be raised and the filesystem store
+# may not be available for adding new images.
+#
+# Possible values:
+#     * A valid path to a directory
+#
+# Related options:
+#     * ``filesystem_store_datadirs``
+#     * ``filesystem_store_file_perm``
+#
+#  (string value)
+filesystem_store_datadir = {{ server.get('filesystem_store_datadir', '/var/lib/glance/images') }}
+
+#
+# List of directories and their priorities to which the filesystem
+# backend store writes images.
+#
+# The filesystem store can be configured to store images in multiple
+# directories as opposed to using a single directory specified by the
+# ``filesystem_store_datadir`` configuration option. When using
+# multiple directories, each directory can be given an optional
+# priority to specify the preference order in which they should
+# be used. Priority is an integer that is concatenated to the
+# directory path with a colon where a higher value indicates higher
+# priority. When two directories have the same priority, the directory
+# with most free space is used. When no priority is specified, it
+# defaults to zero.
+#
+# More information on configuring filesystem store with multiple store
+# directories can be found at
+# https://docs.openstack.org/glance/latest/configuration/configuring.html
+#
+# NOTE: This directory is used only when filesystem store is used as a
+# storage backend. Either ``filesystem_store_datadir`` or
+# ``filesystem_store_datadirs`` option must be specified in
+# ``glance-api.conf``. If both options are specified, a
+# ``BadStoreConfiguration`` will be raised and the filesystem store
+# may not be available for adding new images.
+#
+# Possible values:
+#     * List of strings of the following form:
+#         * ``<a valid directory path>:<optional integer priority>``
+#
+# Related options:
+#     * ``filesystem_store_datadir``
+#     * ``filesystem_store_file_perm``
+#
+#  (multi valued)
+#filesystem_store_datadirs =
+
+#
+# Filesystem store metadata file.
+#
+# The path to a file which contains the metadata to be returned with
+# any location associated with the filesystem store. The file must
+# contain a valid JSON object. The object should contain the keys
+# ``id`` and ``mountpoint``. The value for both keys should be a
+# string.
+#
+# Possible values:
+#     * A valid path to the store metadata file
+#
+# Related options:
+#     * None
+#
+#  (string value)
+#filesystem_store_metadata_file = <None>
+{%- if server.filesystem_store_metadata_file is defined %}
+filesystem_store_metadata_file = {{ server.get('filesystem_store_metadata_file', '/etc/glance/filesystem_store_metadata.json') }}
+{%- endif %}
+
+#
+# File access permissions for the image files.
+#
+# Set the intended file access permissions for image data. This provides
+# a way to enable other services, e.g. Nova, to consume images directly
+# from the filesystem store. The users running the services that are
+# intended to be given access to could be made a member of the group
+# that owns the files created. Assigning a value less then or equal to
+# zero for this configuration option signifies that no changes be made
+# to the  default permissions. This value will be decoded as an octal
+# digit.
+#
+# For more information, please refer the documentation at
+# https://docs.openstack.org/glance/latest/configuration/configuring.html
+#
+# Possible values:
+#     * A valid file access permission
+#     * Zero
+#     * Any negative integer
+#
+# Related options:
+#     * None
+#
+#  (integer value)
+#filesystem_store_file_perm = 0
+
+#
+# Path to the CA bundle file.
+#
+# This configuration option enables the operator to use a custom
+# Certificate Authority file to verify the remote server certificate. If
+# this option is set, the ``https_insecure`` option will be ignored and
+# the CA file specified will be used to authenticate the server
+# certificate and establish a secure connection to the server.
+#
+# Possible values:
+#     * A valid path to a CA file
+#
+# Related options:
+#     * https_insecure
+#
+#  (string value)
+#https_ca_certificates_file = <None>
+
+#
+# Set verification of the remote server certificate.
+#
+# This configuration option takes in a boolean value to determine
+# whether or not to verify the remote server certificate. If set to
+# True, the remote server certificate is not verified. If the option is
+# set to False, then the default CA truststore is used for verification.
+#
+# This option is ignored if ``https_ca_certificates_file`` is set.
+# The remote server certificate will then be verified using the file
+# specified using the ``https_ca_certificates_file`` option.
+#
+# Possible values:
+#     * True
+#     * False
+#
+# Related options:
+#     * https_ca_certificates_file
+#
+#  (boolean value)
+#https_insecure = true
+
+#
+# The http/https proxy information to be used to connect to the remote
+# server.
+#
+# This configuration option specifies the http/https proxy information
+# that should be used to connect to the remote server. The proxy
+# information should be a key value pair of the scheme and proxy, for
+# example, http:10.0.0.1:3128. You can also specify proxies for multiple
+# schemes by separating the key value pairs with a comma, for example,
+# http:10.0.0.1:3128, https:10.0.0.1:1080.
+#
+# Possible values:
+#     * A comma separated list of scheme:proxy pairs as described above
+#
+# Related options:
+#     * None
+#
+#  (dict value)
+#http_proxy_information =
+
+{%- if 'rbd' in storage_engines %}
+#
+# Size, in megabytes, to chunk RADOS images into.
+#
+# Provide an integer value representing the size in megabytes to chunk
+# Glance images into. The default chunk size is 8 megabytes. For optimal
+# performance, the value should be a power of two.
+#
+# When Ceph's RBD object storage system is used as the storage backend
+# for storing Glance images, the images are chunked into objects of the
+# size set using this option. These chunked objects are then stored
+# across the distributed block data store to use for Glance.
+#
+# Possible Values:
+#     * Any positive integer value
+#
+# Related options:
+#     * None
+#
+#  (integer value)
+# Minimum value: 1
+rbd_store_chunk_size = {{ server.storage.chunk_size }}
+
+#
+# RADOS pool in which images are stored.
+#
+# When RBD is used as the storage backend for storing Glance images, the
+# images are stored by means of logical grouping of the objects (chunks
+# of images) into a ``pool``. Each pool is defined with the number of
+# placement groups it can contain. The default pool that is used is
+# 'images'.
+#
+# More information on the RBD storage backend can be found here:
+# http://ceph.com/planet/how-data-is-stored-in-ceph-cluster/
+#
+# Possible Values:
+#     * A valid pool name
+#
+# Related options:
+#     * None
+#
+#  (string value)
+rbd_store_pool = {{ server.storage.pool }}
+
+#
+# RADOS user to authenticate as.
+#
+# This configuration option takes in the RADOS user to authenticate as.
+# This is only needed when RADOS authentication is enabled and is
+# applicable only if the user is using Cephx authentication. If the
+# value for this option is not set by the user or is set to None, a
+# default value will be chosen, which will be based on the client.
+# section in rbd_store_ceph_conf.
+#
+# Possible Values:
+#     * A valid RADOS user
+#
+# Related options:
+#     * rbd_store_ceph_conf
+#
+#  (string value)
+rbd_store_user = {{ server.storage.user }}
+
+#
+# Ceph configuration file path.
+#
+# This configuration option takes in the path to the Ceph configuration
+# file to be used. If the value for this option is not set by the user
+# or is set to None, librados will locate the default configuration file
+# which is located at /etc/ceph/ceph.conf. If using Cephx
+# authentication, this file should include a reference to the right
+# keyring in a client.<USER> section
+#
+# Possible Values:
+#     * A valid path to a configuration file
+#
+# Related options:
+#     * rbd_store_user
+#
+#  (string value)
+rbd_store_ceph_conf = /etc/ceph/ceph.conf
+
+#
+# Timeout value for connecting to Ceph cluster.
+#
+# This configuration option takes in the timeout value in seconds used
+# when connecting to the Ceph cluster i.e. it sets the time to wait for
+# glance-api before closing the connection. This prevents glance-api
+# hangups during the connection to RBD. If the value for this option
+# is set to less than or equal to 0, no timeout is set and the default
+# librados value is used.
+#
+# Possible Values:
+#     * Any integer value
+#
+# Related options:
+#     * None
+#
+#  (integer value)
+#rados_connect_timeout = 0
+{%- endif %}
+
+#
+# Chunk size for images to be stored in Sheepdog data store.
+#
+# Provide an integer value representing the size in mebibyte
+# (1048576 bytes) to chunk Glance images into. The default
+# chunk size is 64 mebibytes.
+#
+# When using Sheepdog distributed storage system, the images are
+# chunked into objects of this size and then stored across the
+# distributed data store to use for Glance.
+#
+# Chunk sizes, if a power of two, help avoid fragmentation and
+# enable improved performance.
+#
+# Possible values:
+#     * Positive integer value representing size in mebibytes.
+#
+# Related Options:
+#     * None
+#
+#  (integer value)
+# Minimum value: 1
+#sheepdog_store_chunk_size = 64
+
+#
+# Port number on which the sheep daemon will listen.
+#
+# Provide an integer value representing a valid port number on
+# which you want the Sheepdog daemon to listen on. The default
+# port is 7000.
+#
+# The Sheepdog daemon, also called 'sheep', manages the storage
+# in the distributed cluster by writing objects across the storage
+# network. It identifies and acts on the messages it receives on
+# the port number set using ``sheepdog_store_port`` option to store
+# chunks of Glance images.
+#
+# Possible values:
+#     * A valid port number (0 to 65535)
+#
+# Related Options:
+#     * sheepdog_store_address
+#
+#  (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#sheepdog_store_port = 7000
+
+#
+# Address to bind the Sheepdog daemon to.
+#
+# Provide a string value representing the address to bind the
+# Sheepdog daemon to. The default address set for the 'sheep'
+# is 127.0.0.1.
+#
+# The Sheepdog daemon, also called 'sheep', manages the storage
+# in the distributed cluster by writing objects across the storage
+# network. It identifies and acts on the messages directed to the
+# address set using ``sheepdog_store_address`` option to store
+# chunks of Glance images.
+#
+# Possible values:
+#     * A valid IPv4 address
+#     * A valid IPv6 address
+#     * A valid hostname
+#
+# Related Options:
+#     * sheepdog_store_port
+#
+#  (host address value)
+#sheepdog_store_address = 127.0.0.1
+
+{%- if 'swift' in storage_engines %}
+#
+# Set verification of the server certificate.
+#
+# This boolean determines whether or not to verify the server
+# certificate. If this option is set to True, swiftclient won't check
+# for a valid SSL certificate when authenticating. If the option is set
+# to False, then the default CA truststore is used for verification.
+#
+# Possible values:
+#     * True
+#     * False
+#
+# Related options:
+#     * swift_store_cacert
+#
+#  (boolean value)
+swift_store_auth_insecure = {{ server.storage.swift.store.get('auth', {}).get('insecure', False)|lower }}
+
+#
+# Path to the CA bundle file.
+#
+# This configuration option enables the operator to specify the path to
+# a custom Certificate Authority file for SSL verification when
+# connecting to Swift.
+#
+# Possible values:
+#     * A valid path to a CA file
+#
+# Related options:
+#     * swift_store_auth_insecure
+#
+#  (string value)
+#swift_store_cacert = /etc/ssl/certs/ca-certificates.crt
+{%- if server.storage.swift.store.cacert is defined %}
+swift_store_cacert = {{ server.storage.swift.store.cacert }}
+{%- endif %}
+
+#
+# The region of Swift endpoint to use by Glance.
+#
+# Provide a string value representing a Swift region where Glance
+# can connect to for image storage. By default, there is no region
+# set.
+#
+# When Glance uses Swift as the storage backend to store images
+# for a specific tenant that has multiple endpoints, setting of a
+# Swift region with ``swift_store_region`` allows Glance to connect
+# to Swift in the specified region as opposed to a single region
+# connectivity.
+#
+# This option can be configured for both single-tenant and
+# multi-tenant storage.
+#
+# NOTE: Setting the region with ``swift_store_region`` is
+# tenant-specific and is necessary ``only if`` the tenant has
+# multiple endpoints across different regions.
+#
+# Possible values:
+#     * A string value representing a valid Swift region.
+#
+# Related Options:
+#     * None
+#
+#  (string value)
+#swift_store_region = RegionTwo
+{%- if server.storage.swift.store.region is defined %}
+swift_store_region = {{ server.storage.swift.store.region }}
+{%- endif %}
+
+#
+# The URL endpoint to use for Swift backend storage.
+#
+# Provide a string value representing the URL endpoint to use for
+# storing Glance images in Swift store. By default, an endpoint
+# is not set and the storage URL returned by ``auth`` is used.
+# Setting an endpoint with ``swift_store_endpoint`` overrides the
+# storage URL and is used for Glance image storage.
+#
+# NOTE: The URL should include the path up to, but excluding the
+# container. The location of an object is obtained by appending
+# the container and object to the configured URL.
+#
+# Possible values:
+#     * String value representing a valid URL path up to a Swift container
+#
+# Related Options:
+#     * None
+#
+#  (string value)
+#swift_store_endpoint = https://swift.openstack.example.org/v1/path_not_including_container_name
+{%- if server.storage.swift.store.endpoint is defined %}
+swift_store_endpoint = {{ server.storage.swift.store.endpoint }}
+{%- endif %}
+
+#
+# Endpoint Type of Swift service.
+#
+# This string value indicates the endpoint type to use to fetch the
+# Swift endpoint. The endpoint type determines the actions the user will
+# be allowed to perform, for instance, reading and writing to the Store.
+# This setting is only used if swift_store_auth_version is greater than
+# 1.
+#
+# Possible values:
+#     * publicURL
+#     * adminURL
+#     * internalURL
+#
+# Related options:
+#     * swift_store_endpoint
+#
+#  (string value)
+# Possible values:
+# publicURL - <No description provided>
+# adminURL - <No description provided>
+# internalURL - <No description provided>
+swift_store_endpoint_type = {{ server.storage.swift.store.get('endpoint_type', server.identity.get('endpoint_type', 'publicURL')) }}
+
+#
+# Type of Swift service to use.
+#
+# Provide a string value representing the service type to use for
+# storing images while using Swift backend storage. The default
+# service type is set to ``object-store``.
+#
+# NOTE: If ``swift_store_auth_version`` is set to 2, the value for
+# this configuration option needs to be ``object-store``. If using
+# a higher version of Keystone or a different auth scheme, this
+# option may be modified.
+#
+# Possible values:
+#     * A string representing a valid service type for Swift storage.
+#
+# Related Options:
+#     * None
+#
+#  (string value)
+#swift_store_service_type = object-store
+{%- if server.storage.swift.store.service_type is defined %}
+swift_store_service_type = {{ server.storage.swift.store.service_type }}
+{%- endif %}
+
+#
+# Name of single container to store images/name prefix for multiple containers
+#
+# When a single container is being used to store images, this configuration
+# option indicates the container within the Glance account to be used for
+# storing all images. When multiple containers are used to store images, this
+# will be the name prefix for all containers. Usage of single/multiple
+# containers can be controlled using the configuration option
+# ``swift_store_multiple_containers_seed``.
+#
+# When using multiple containers, the containers will be named after the value
+# set for this configuration option with the first N chars of the image UUID
+# as the suffix delimited by an underscore (where N is specified by
+# ``swift_store_multiple_containers_seed``).
+#
+# Example: if the seed is set to 3 and swift_store_container = ``glance``, then
+# an image with UUID ``fdae39a1-bac5-4238-aba4-69bcc726e848`` would be placed in
+# the container ``glance_fda``. All dashes in the UUID are included when
+# creating the container name but do not count toward the character limit, so
+# when N=10 the container name would be ``glance_fdae39a1-ba.``
+#
+# Possible values:
+#     * If using single container, this configuration option can be any string
+#       that is a valid swift container name in Glance's Swift account
+#     * If using multiple containers, this configuration option can be any
+#       string as long as it satisfies the container naming rules enforced by
+#       Swift. The value of ``swift_store_multiple_containers_seed`` should be
+#       taken into account as well.
+#
+# Related options:
+#     * ``swift_store_multiple_containers_seed``
+#     * ``swift_store_multi_tenant``
+#     * ``swift_store_create_container_on_put``
+#
+#  (string value)
+swift_store_container = {{ server.storage.swift.store.get('container', 'glance') }}
+
+#
+# The size threshold, in MB, after which Glance will start segmenting image
+# data.
+#
+# Swift has an upper limit on the size of a single uploaded object. By default,
+# this is 5GB. To upload objects bigger than this limit, objects are segmented
+# into multiple smaller objects that are tied together with a manifest file.
+# For more detail, refer to
+# https://docs.openstack.org/swift/latest/overview_large_objects.html
+#
+# This configuration option specifies the size threshold over which the Swift
+# driver will start segmenting image data into multiple smaller files.
+# Currently, the Swift driver only supports creating Dynamic Large Objects.
+#
+# NOTE: This should be set by taking into account the large object limit
+# enforced by the Swift cluster in consideration.
+#
+# Possible values:
+#     * A positive integer that is less than or equal to the large object limit
+#       enforced by the Swift cluster in consideration.
+#
+# Related options:
+#     * ``swift_store_large_object_chunk_size``
+#
+#  (integer value)
+# Minimum value: 1
+#swift_store_large_object_size = 5120
+{%- if server.storage.swift.store.large_object_size is defined %}
+swift_store_large_object_size = {{ server.storage.swift.store.large_object_size }}
+{%- endif %}
+
+#
+# The maximum size, in MB, of the segments when image data is segmented.
+#
+# When image data is segmented to upload images that are larger than the limit
+# enforced by the Swift cluster, image data is broken into segments that are no
+# bigger than the size specified by this configuration option.
+# Refer to ``swift_store_large_object_size`` for more detail.
+#
+# For example: if ``swift_store_large_object_size`` is 5GB and
+# ``swift_store_large_object_chunk_size`` is 1GB, an image of size 6.2GB will be
+# segmented into 7 segments where the first six segments will be 1GB in size and
+# the seventh segment will be 0.2GB.
+#
+# Possible values:
+#     * A positive integer that is less than or equal to the large object limit
+#       enforced by Swift cluster in consideration.
+#
+# Related options:
+#     * ``swift_store_large_object_size``
+#
+#  (integer value)
+# Minimum value: 1
+#swift_store_large_object_chunk_size = 200
+{%- if server.storage.swift.store.large_object_chunk_size is defined %}
+swift_store_large_object_chunk_size = {{ server.storage.swift.store.large_object_chunk_size }}
+{%- endif %}
+
+#
+# Create container, if it doesn't already exist, when uploading image.
+#
+# At the time of uploading an image, if the corresponding container doesn't
+# exist, it will be created provided this configuration option is set to True.
+# By default, it won't be created. This behavior is applicable for both single
+# and multiple containers mode.
+#
+# Possible values:
+#     * True
+#     * False
+#
+# Related options:
+#     * None
+#
+#  (boolean value)
+swift_store_create_container_on_put = {{ server.storage.swift.store.get('create_container_on_put', False)|lower }}
+
+#
+# Store images in tenant's Swift account.
+#
+# This enables multi-tenant storage mode which causes Glance images to be stored
+# in tenant specific Swift accounts. If this is disabled, Glance stores all
+# images in its own account. More details multi-tenant store can be found at
+# https://wiki.openstack.org/wiki/GlanceSwiftTenantSpecificStorage
+#
+# NOTE: If using multi-tenant swift store, please make sure
+# that you do not set a swift configuration file with the
+# 'swift_store_config_file' option.
+#
+# Possible values:
+#     * True
+#     * False
+#
+# Related options:
+#     * swift_store_config_file
+#
+#  (boolean value)
+swift_store_multi_tenant = {{ server.storage.swift.store.get('multi_tenant', False)|lower }}
+
+#
+# Seed indicating the number of containers to use for storing images.
+#
+# When using a single-tenant store, images can be stored in one or more than one
+# containers. When set to 0, all images will be stored in one single container.
+# When set to an integer value between 1 and 32, multiple containers will be
+# used to store images. This configuration option will determine how many
+# containers are created. The total number of containers that will be used is
+# equal to 16^N, so if this config option is set to 2, then 16^2=256 containers
+# will be used to store images.
+#
+# Please refer to ``swift_store_container`` for more detail on the naming
+# convention. More detail about using multiple containers can be found at
+# https://specs.openstack.org/openstack/glance-specs/specs/kilo/swift-store-
+# multiple-containers.html
+#
+# NOTE: This is used only when swift_store_multi_tenant is disabled.
+#
+# Possible values:
+#     * A non-negative integer less than or equal to 32
+#
+# Related options:
+#     * ``swift_store_container``
+#     * ``swift_store_multi_tenant``
+#     * ``swift_store_create_container_on_put``
+#
+#  (integer value)
+# Minimum value: 0
+# Maximum value: 32
+swift_store_multiple_containers_seed = {{ server.storage.swift.store.get('multiple_containers_seed', 0) }}
+
+#
+# List of tenants that will be granted admin access.
+#
+# This is a list of tenants that will be granted read/write access on
+# all Swift containers created by Glance in multi-tenant mode. The
+# default value is an empty list.
+#
+# Possible values:
+#     * A comma separated list of strings representing UUIDs of Keystone
+#       projects/tenants
+#
+# Related options:
+#     * None
+#
+#  (list value)
+#swift_store_admin_tenants =
+{%- if server.storage.swift.store.admin_tenants is defined %}
+swift_store_admin_tenants = {{ server.storage.swift.store.admin_tenants }}
+{%- endif %}
+
+#
+# SSL layer compression for HTTPS Swift requests.
+#
+# Provide a boolean value to determine whether or not to compress
+# HTTPS Swift requests for images at the SSL layer. By default,
+# compression is enabled.
+#
+# When using Swift as the backend store for Glance image storage,
+# SSL layer compression of HTTPS Swift requests can be set using
+# this option. If set to False, SSL layer compression of HTTPS
+# Swift requests is disabled. Disabling this option may improve
+# performance for images which are already in a compressed format,
+# for example, qcow2.
+#
+# Possible values:
+#     * True
+#     * False
+#
+# Related Options:
+#     * None
+#
+#  (boolean value)
+swift_store_ssl_compression = {{ server.storage.swift.store.get('ssl_compression', True)|lower }}
+
+#
+# The number of times a Swift download will be retried before the
+# request fails.
+#
+# Provide an integer value representing the number of times an image
+# download must be retried before erroring out. The default value is
+# zero (no retry on a failed image download). When set to a positive
+# integer value, ``swift_store_retry_get_count`` ensures that the
+# download is attempted this many more times upon a download failure
+# before sending an error message.
+#
+# Possible values:
+#     * Zero
+#     * Positive integer value
+#
+# Related Options:
+#     * None
+#
+#  (integer value)
+# Minimum value: 0
+#swift_store_retry_get_count = 0
+{%- if server.storage.swift.store.retry_get_count is defined %}
+swift_store_retry_get_count = {{ server.storage.swift.store.retry_get_count }}
+{%- endif %}
+
+#
+# Time in seconds defining the size of the window in which a new
+# token may be requested before the current token is due to expire.
+#
+# Typically, the Swift storage driver fetches a new token upon the
+# expiration of the current token to ensure continued access to
+# Swift. However, some Swift transactions (like uploading image
+# segments) may not recover well if the token expires on the fly.
+#
+# Hence, by fetching a new token before the current token expiration,
+# we make sure that the token does not expire or is close to expiry
+# before a transaction is attempted. By default, the Swift storage
+# driver requests for a new token 60 seconds or less before the
+# current token expiration.
+#
+# Possible values:
+#     * Zero
+#     * Positive integer value
+#
+# Related Options:
+#     * None
+#
+#  (integer value)
+# Minimum value: 0
+#swift_store_expire_soon_interval = 60
+{%- if server.storage.swift.store.expire_soon_interval is defined %}
+swift_store_expire_soon_interval = {{ server.storage.swift.store.expire_soon_interval }}
+{%- endif %}
+
+#
+# Use trusts for multi-tenant Swift store.
+#
+# This option instructs the Swift store to create a trust for each
+# add/get request when the multi-tenant store is in use. Using trusts
+# allows the Swift store to avoid problems that can be caused by an
+# authentication token expiring during the upload or download of data.
+#
+# By default, ``swift_store_use_trusts`` is set to ``True``(use of
+# trusts is enabled). If set to ``False``, a user token is used for
+# the Swift connection instead, eliminating the overhead of trust
+# creation.
+#
+# NOTE: This option is considered only when
+# ``swift_store_multi_tenant`` is set to ``True``
+#
+# Possible values:
+#     * True
+#     * False
+#
+# Related options:
+#     * swift_store_multi_tenant
+#
+#  (boolean value)
+#swift_store_use_trusts = true
+{%- if server.storage.swift.store.use_trusts is defined %}
+swift_store_use_trusts = {{ server.storage.swift.store.use_trusts|lower }}
+{%- endif %}
+
+#
+# Buffer image segments before upload to Swift.
+#
+# Provide a boolean value to indicate whether or not Glance should
+# buffer image data to disk while uploading to swift. This enables
+# Glance to resume uploads on error.
+#
+# NOTES:
+# When enabling this option, one should take great care as this
+# increases disk usage on the API node. Be aware that depending
+# upon how the file system is configured, the disk space used
+# for buffering may decrease the actual disk space available for
+# the glance image cache.  Disk utilization will cap according to
+# the following equation:
+# (``swift_store_large_object_chunk_size`` * ``workers`` * 1000)
+#
+# Possible values:
+#     * True
+#     * False
+#
+# Related options:
+#     * swift_upload_buffer_dir
+#
+#  (boolean value)
+#swift_buffer_on_upload = false
+
+#
+# Reference to default Swift account/backing store parameters.
+#
+# Provide a string value representing a reference to the default set
+# of parameters required for using swift account/backing store for
+# image storage. The default reference value for this configuration
+# option is 'ref1'. This configuration option dereferences the
+# parameters and facilitates image storage in Swift storage backend
+# every time a new image is added.
+#
+# Possible values:
+#     * A valid string value
+#
+# Related options:
+#     * None
+#
+#  (string value)
+#default_swift_reference = ref1
+{%- if server.storage.swift.store.default_swift_reference is defined %}
+default_swift_reference = {{ server.storage.swift.store.default_swift_reference }}
+{%- endif %}
+
+# DEPRECATED: Version of the authentication service to use. Valid versions are 2
+# and 3 for keystone and 1 (deprecated) for swauth and rackspace. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason:
+# The option 'auth_version' in the Swift back-end configuration file is
+# used instead.
+#swift_store_auth_version = 2
+
+# DEPRECATED: The address where the Swift authentication service is listening.
+# (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason:
+# The option 'auth_address' in the Swift back-end configuration file is
+# used instead.
+#swift_store_auth_address = <None>
+
+# DEPRECATED: The user to authenticate against the Swift authentication service.
+# (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason:
+# The option 'user' in the Swift back-end configuration file is set instead.
+#swift_store_user = <None>
+
+# DEPRECATED: Auth key for the user authenticating against the Swift
+# authentication service. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason:
+# The option 'key' in the Swift back-end configuration file is used
+# to set the authentication key instead.
+#swift_store_key = <None>
+
+#
+# Absolute path to the file containing the swift account(s)
+# configurations.
+#
+# Include a string value representing the path to a configuration
+# file that has references for each of the configured Swift
+# account(s)/backing stores. By default, no file path is specified
+# and customized Swift referencing is disabled. Configuring this
+# option is highly recommended while using Swift storage backend for
+# image storage as it avoids storage of credentials in the database.
+#
+# NOTE: Please do not configure this option if you have set
+# ``swift_store_multi_tenant`` to ``True``.
+#
+# Possible values:
+#     * String value representing an absolute path on the glance-api
+#       node
+#
+# Related options:
+#     * swift_store_multi_tenant
+#
+#  (string value)
+#swift_store_config_file = <None>
+{%- if server.storage.swift.store.references is defined %}
+swift_store_config_file = /etc/glance/swift-stores.conf
+{%- endif %}
+
+#
+# Directory to buffer image segments before upload to Swift.
+#
+# Provide a string value representing the absolute path to the
+# directory on the glance node where image segments will be
+# buffered briefly before they are uploaded to swift.
+#
+# NOTES:
+# * This is required only when the configuration option
+#   ``swift_buffer_on_upload`` is set to True.
+# * This directory should be provisioned keeping in mind the
+#   ``swift_store_large_object_chunk_size`` and the maximum
+#   number of images that could be uploaded simultaneously by
+#   a given glance node.
+#
+# Possible values:
+#     * String value representing an absolute directory path
+#
+# Related options:
+#     * swift_buffer_on_upload
+#     * swift_store_large_object_chunk_size
+#
+#  (string value)
+#swift_upload_buffer_dir = <None>
+{%- endif %}
+
+{%- if server.storage is defined and server.storage.get('vmware', {}).get('enabled') %}
+{%- set _data = server.storage.vmware %}
+{%- include "glance/files/" ~ server.version ~ "/stores/_vmware.conf" %}
+{%- endif %}
+
+
+[image_format]
+
+#
+# From glance.api
+#
+
+# Supported values for the 'container_format' image attribute (list value)
+# Deprecated group/name - [DEFAULT]/container_formats
+#container_formats = ami,ari,aki,bare,ovf,ova,docker
+
+# Supported values for the 'disk_format' image attribute (list value)
+# Deprecated group/name - [DEFAULT]/disk_formats
+#disk_formats = ami,ari,aki,vhd,vhdx,vmdk,raw,qcow2,vdi,iso,ploop
+
+
+[keystone_authtoken]
+{%- set _data = server.identity %}
+{%- if 'cacert_file' not in _data.keys() %}{% do _data.update({'cacert_file': server.cacert_file}) %}{% endif %}
+{%- set auth_type = _data.get('auth_type', 'password') %}
+{%- if server.get('cache',{}).members is defined and 'cache' not in _data.keys() %}
+{% do _data.update({'cache': server.cache}) %}
+{%- endif %}
+{%- include "oslo_templates/files/" ~ server.version ~ "/keystonemiddleware/_auth_token.conf" %}
+{%- include "oslo_templates/files/" ~ server.version ~ "/keystoneauth/_type_" ~ auth_type ~ ".conf" %}
+
+
+[matchmaker_redis]
+
+#
+# From oslo.messaging
+#
+
+# DEPRECATED: Host to locate redis. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#host = 127.0.0.1
+
+# DEPRECATED: Use this port to connect to redis host. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#port = 6379
+
+# DEPRECATED: Password for Redis server (optional). (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#password =
+
+# DEPRECATED: List of Redis Sentinel hosts (fault tolerance mode), e.g.,
+# [host:port, host1:port ... ] (list value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#sentinel_hosts =
+
+# Redis replica set name. (string value)
+#sentinel_group_name = oslo-messaging-zeromq
+
+# Time in ms to wait between connection attempts. (integer value)
+#wait_timeout = 2000
+
+# Time in ms to wait before the transaction is killed. (integer value)
+#check_timeout = 20000
+
+# Timeout in ms on blocking socket operations. (integer value)
+#socket_timeout = 10000
+
+
+[oslo_concurrency]
+{%- if server.concurrency is defined %}
+{%- set _data = server.concurrency %}
+{%- include "oslo_templates/files/" ~ server.version ~ "/oslo/_concurrency.conf" %}
+{%- endif %}
+
+
+[oslo_messaging_amqp]
+{%- set _data = server.amqp %}
+{%- include "oslo_templates/files/" ~ server.version ~ "/oslo/messaging/_amqp.conf" %}
+
+
+{%- if server.message_queue is defined %}
+{%- set _data = server.message_queue %}
+{%- if _data.engine == 'rabbitmq' %}
+    {%- set messaging_engine = 'rabbit' %}
+{%- else %}
+    {%- set messaging_engine = _data.engine %}
+{%- endif %}
+[oslo_messaging_{{ messaging_engine }}]
+{%- if _data.ssl is defined and 'cacert_file' not in _data.get('ssl', {}).keys() %}{% do _data['ssl'].update({'cacert_file': server.cacert_file}) %}{% endif %}
+{%- include "oslo_templates/files/" ~ server.version ~ "/oslo/messaging/_" ~ messaging_engine ~ ".conf" %}
+{%- endif %}
+
+
+[oslo_messaging_notifications]
+{%- set _data = server.notification %}
+{%- include "oslo_templates/files/" ~ server.version ~ "/oslo/messaging/_notifications.conf" %}
+
+
+[oslo_middleware]
+{%- set _data = server %}
+{%- include "oslo_templates/files/" ~ server.version ~ "/oslo/_middleware.conf" %}
+
+
+[oslo_policy]
+{%- if server.oslo_policy is defined %}
+{%- set _data = server.oslo_policy %}
+{%- include "oslo_templates/files/" ~ server.version ~ "/oslo/_policy.conf" %}
+{%- endif %}
+
+
+[paste_deploy]
+
+#
+# From glance.api
+#
+
+#
+# Deployment flavor to use in the server application pipeline.
+#
+# Provide a string value representing the appropriate deployment
+# flavor used in the server application pipleline. This is typically
+# the partial name of a pipeline in the paste configuration file with
+# the service name removed.
+#
+# For example, if your paste section name in the paste configuration
+# file is [pipeline:glance-api-keystone], set ``flavor`` to
+# ``keystone``.
+#
+# Possible values:
+#     * String value representing a partial pipeline name.
+#
+# Related Options:
+#     * config_file
+#
+#  (string value)
+flavor = {{ server.get('flavor', 'keystone') }}
+
+#
+# Name of the paste configuration file.
+#
+# Provide a string value representing the name of the paste
+# configuration file to use for configuring piplelines for
+# server application deployments.
+#
+# NOTES:
+#     * Provide the name or the path relative to the glance directory
+#       for the paste configuration file and not the absolute path.
+#     * The sample paste configuration file shipped with Glance need
+#       not be edited in most cases as it comes with ready-made
+#       pipelines for all common deployment flavors.
+#
+# If no value is specified for this option, the ``paste.ini`` file
+# with the prefix of the corresponding Glance service's configuration
+# file name will be searched for in the known configuration
+# directories. (For example, if this option is missing from or has no
+# value set in ``glance-api.conf``, the service will look for a file
+# named ``glance-api-paste.ini``.) If the paste configuration file is
+# not found, the service will not start.
+#
+# Possible values:
+#     * A string value representing the name of the paste configuration
+#       file.
+#
+# Related Options:
+#     * flavor
+#
+#  (string value)
+#config_file = glance-api-paste.ini
+
+
+[profiler]
+
+#
+# From glance.api
+#
+
+#
+# Enable the profiling for all services on this node.
+#
+# Default value is False (fully disable the profiling feature).
+#
+# Possible values:
+#
+# * True: Enables the feature
+# * False: Disables the feature. The profiling cannot be started via this
+# project
+#   operations. If the profiling is triggered by another project, this project
+#   part will be empty.
+#  (boolean value)
+# Deprecated group/name - [profiler]/profiler_enabled
+#enabled = false
+
+#
+# Enable SQL requests profiling in services.
+#
+# Default value is False (SQL requests won't be traced).
+#
+# Possible values:
+#
+# * True: Enables SQL requests profiling. Each SQL query will be part of the
+#   trace and can the be analyzed by how much time was spent for that.
+# * False: Disables SQL requests profiling. The spent time is only shown on a
+#   higher level of operations. Single SQL queries cannot be analyzed this way.
+#  (boolean value)
+#trace_sqlalchemy = false
+
+#
+# Secret key(s) to use for encrypting context data for performance profiling.
+#
+# This string value should have the following format: <key1>[,<key2>,...<keyn>],
+# where each key is some random string. A user who triggers the profiling via
+# the REST API has to set one of these keys in the headers of the REST API call
+# to include profiling results of this node for this particular project.
+#
+# Both "enabled" flag and "hmac_keys" config options should be set to enable
+# profiling. Also, to generate correct profiling information across all services
+# at least one key needs to be consistent between OpenStack projects. This
+# ensures it can be used from client side to generate the trace, containing
+# information from all possible resources.
+#  (string value)
+#hmac_keys = SECRET_KEY
+
+#
+# Connection string for a notifier backend.
+#
+# Default value is ``messaging://`` which sets the notifier to oslo_messaging.
+#
+# Examples of possible values:
+#
+# * ``messaging://`` - use oslo_messaging driver for sending spans.
+# * ``redis://127.0.0.1:6379`` - use redis driver for sending spans.
+# * ``mongodb://127.0.0.1:27017`` - use mongodb driver for sending spans.
+# * ``elasticsearch://127.0.0.1:9200`` - use elasticsearch driver for sending
+#   spans.
+# * ``jaeger://127.0.0.1:6831`` - use jaeger tracing as driver for sending
+# spans.
+#  (string value)
+#connection_string = messaging://
+
+#
+# Document type for notification indexing in elasticsearch.
+#  (string value)
+#es_doc_type = notification
+
+#
+# This parameter is a time value parameter (for example: es_scroll_time=2m),
+# indicating for how long the nodes that participate in the search will maintain
+# relevant resources in order to continue and support it.
+#  (string value)
+#es_scroll_time = 2m
+
+#
+# Elasticsearch splits large requests in batches. This parameter defines
+# maximum size of each batch (for example: es_scroll_size=10000).
+#  (integer value)
+#es_scroll_size = 10000
+
+#
+# Redissentinel provides a timeout option on the connections.
+# This parameter defines that timeout (for example: socket_timeout=0.1).
+#  (floating point value)
+#socket_timeout = 0.1
+
+#
+# Redissentinel uses a service name to identify a master redis service.
+# This parameter defines the name (for example:
+# ``sentinal_service_name=mymaster``).
+#  (string value)
+#sentinel_service_name = mymaster
+
+#
+# Enable filter traces that contain error/exception to a separated place.
+#
+# Default value is set to False.
+#
+# Possible values:
+#
+# * True: Enable filter traces that contain error/exception.
+# * False: Disable the filter.
+#  (boolean value)
+#filter_error_trace = false
+
+
+[store_type_location_strategy]
+
+#
+# From glance.api
+#
+
+#
+# Preference order of storage backends.
+#
+# Provide a comma separated list of store names in the order in
+# which images should be retrieved from storage backends.
+# These store names must be registered with the ``stores``
+# configuration option.
+#
+# NOTE: The ``store_type_preference`` configuration option is applied
+# only if ``store_type`` is chosen as a value for the
+# ``location_strategy`` configuration option. An empty list will not
+# change the location order.
+#
+# Possible values:
+#     * Empty list
+#     * Comma separated list of registered store names. Legal values are:
+#         * file
+#         * http
+#         * rbd
+#         * swift
+#         * sheepdog
+#         * cinder
+#         * vmware
+#
+# Related options:
+#     * location_strategy
+#     * stores
+#
+#  (list value)
+#store_type_preference =
+
+
+[task]
+
+#
+# From glance.api
+#
+
+# Time in hours for which a task lives after, either succeeding or failing
+# (integer value)
+# Deprecated group/name - [DEFAULT]/task_time_to_live
+#task_time_to_live = 48
+
+#
+# Task executor to be used to run task scripts.
+#
+# Provide a string value representing the executor to use for task
+# executions. By default, ``TaskFlow`` executor is used.
+#
+# ``TaskFlow`` helps make task executions easy, consistent, scalable
+# and reliable. It also enables creation of lightweight task objects
+# and/or functions that are combined together into flows in a
+# declarative manner.
+#
+# Possible values:
+#     * taskflow
+#
+# Related Options:
+#     * None
+#
+#  (string value)
+#task_executor = taskflow
+
+#
+# Absolute path to the work directory to use for asynchronous
+# task operations.
+#
+# The directory set here will be used to operate over images -
+# normally before they are imported in the destination store.
+#
+# NOTE: When providing a value for ``work_dir``, please make sure
+# that enough space is provided for concurrent tasks to run
+# efficiently without running out of space.
+#
+# A rough estimation can be done by multiplying the number of
+# ``max_workers`` with an average image size (e.g 500MB). The image
+# size estimation should be done based on the average size in your
+# deployment. Note that depending on the tasks running you may need
+# to multiply this number by some factor depending on what the task
+# does. For example, you may want to double the available size if
+# image conversion is enabled. All this being said, remember these
+# are just estimations and you should do them based on the worst
+# case scenario and be prepared to act in case they were wrong.
+#
+# Possible values:
+#     * String value representing the absolute path to the working
+#       directory
+#
+# Related Options:
+#     * None
+#
+#  (string value)
+#work_dir = /work_dir
+
+
+[taskflow_executor]
+
+#
+# From glance.api
+#
+
+#
+# Set the taskflow engine mode.
+#
+# Provide a string type value to set the mode in which the taskflow
+# engine would schedule tasks to the workers on the hosts. Based on
+# this mode, the engine executes tasks either in single or multiple
+# threads. The possible values for this configuration option are:
+# ``serial`` and ``parallel``. When set to ``serial``, the engine runs
+# all the tasks in a single thread which results in serial execution
+# of tasks. Setting this to ``parallel`` makes the engine run tasks in
+# multiple threads. This results in parallel execution of tasks.
+#
+# Possible values:
+#     * serial
+#     * parallel
+#
+# Related options:
+#     * max_workers
+#
+#  (string value)
+# Possible values:
+# serial - <No description provided>
+# parallel - <No description provided>
+#engine_mode = parallel
+
+#
+# Set the number of engine executable tasks.
+#
+# Provide an integer value to limit the number of workers that can be
+# instantiated on the hosts. In other words, this number defines the
+# number of parallel tasks that can be executed at the same time by
+# the taskflow engine. This value can be greater than one when the
+# engine mode is set to parallel.
+#
+# Possible values:
+#     * Integer value greater than or equal to 1
+#
+# Related options:
+#     * engine_mode
+#
+#  (integer value)
+# Minimum value: 1
+# Deprecated group/name - [task]/eventlet_executor_pool_size
+#max_workers = 10
+
+#
+# Set the desired image conversion format.
+#
+# Provide a valid image format to which you want images to be
+# converted before they are stored for consumption by Glance.
+# Appropriate image format conversions are desirable for specific
+# storage backends in order to facilitate efficient handling of
+# bandwidth and usage of the storage infrastructure.
+#
+# By default, ``conversion_format`` is not set and must be set
+# explicitly in the configuration file.
+#
+# The allowed values for this option are ``raw``, ``qcow2`` and
+# ``vmdk``. The  ``raw`` format is the unstructured disk format and
+# should be chosen when RBD or Ceph storage backends are used for
+# image storage. ``qcow2`` is supported by the QEMU emulator that
+# expands dynamically and supports Copy on Write. The ``vmdk`` is
+# another common disk format supported by many common virtual machine
+# monitors like VMWare Workstation.
+#
+# Possible values:
+#     * qcow2
+#     * raw
+#     * vmdk
+#
+# Related options:
+#     * disk_formats
+#
+#  (string value)
+# Possible values:
+# qcow2 - <No description provided>
+# raw - <No description provided>
+# vmdk - <No description provided>
+#conversion_format = raw
+
+
+[barbican]
+{%- if server.get('barbican', {}).get('enabled', False) %}
+{%- set _data = server.identity %}
+{%- include "oslo_templates/files/" ~ server.version ~ "/castellan/_barbican.conf" %}
+{%- endif %}
diff --git a/glance/files/rocky/glance-api.conf.RedHat b/glance/files/rocky/glance-api.conf.RedHat
new file mode 120000
index 0000000..7a47331
--- /dev/null
+++ b/glance/files/rocky/glance-api.conf.RedHat
@@ -0,0 +1 @@
+glance-api.conf.Debian
\ No newline at end of file
diff --git a/glance/files/rocky/glance-cache.conf.Debian b/glance/files/rocky/glance-cache.conf.Debian
new file mode 100644
index 0000000..ba82250
--- /dev/null
+++ b/glance/files/rocky/glance-cache.conf.Debian
@@ -0,0 +1,2241 @@
+{%- from "glance/map.jinja" import server with context %}
+[DEFAULT]
+
+#
+# From glance.cache
+#
+
+#
+# Allow users to add additional/custom properties to images.
+#
+# Glance defines a standard set of properties (in its schema) that
+# appear on every image. These properties are also known as
+# ``base properties``. In addition to these properties, Glance
+# allows users to add custom properties to images. These are known
+# as ``additional properties``.
+#
+# By default, this configuration option is set to ``True`` and users
+# are allowed to add additional properties. The number of additional
+# properties that can be added to an image can be controlled via
+# ``image_property_quota`` configuration option.
+#
+# Possible values:
+#     * True
+#     * False
+#
+# Related options:
+#     * image_property_quota
+#
+#  (boolean value)
+#allow_additional_image_properties = true
+
+# "
+# Secure hashing algorithm used for computing the 'os_hash_value' property.
+#
+# This option configures the Glance "multihash", which consists of two
+# image properties: the 'os_hash_algo' and the 'os_hash_value'.  The
+# 'os_hash_algo' will be populated by the value of this configuration
+# option, and the 'os_hash_value' will be populated by the hexdigest computed
+# when the algorithm is applied to the uploaded or imported image data.
+#
+# The value must be a valid secure hash algorithm name recognized by the
+# python 'hashlib' library.  You can determine what these are by examining
+# the 'hashlib.algorithms_available' data member of the version of the
+# library being used in your Glance installation.  For interoperability
+# purposes, however, we recommend that you use the set of secure hash
+# names supplied by the 'hashlib.algorithms_guaranteed' data member because
+# those algorithms are guaranteed to be supported by the 'hashlib' library
+# on all platforms.  Thus, any image consumer using 'hashlib' locally should
+# be able to verify the 'os_hash_value' of the image.
+#
+# The default value of 'sha512' is a performant secure hash algorithm.
+#
+# If this option is misconfigured, any attempts to store image data will fail.
+# For that reason, we recommend using the default value.
+#
+# Possible values:
+#     * Any secure hash algorithm name recognized by the Python 'hashlib'
+#       library
+#
+# Related options:
+#     * None
+#
+#  (string value)
+#hashing_algorithm = sha512
+
+#
+# Maximum number of image members per image.
+#
+# This limits the maximum of users an image can be shared with. Any negative
+# value is interpreted as unlimited.
+#
+# Related options:
+#     * None
+#
+#  (integer value)
+#image_member_quota = 128
+
+#
+# Maximum number of properties allowed on an image.
+#
+# This enforces an upper limit on the number of additional properties an image
+# can have. Any negative value is interpreted as unlimited.
+#
+# NOTE: This won't have any impact if additional properties are disabled. Please
+# refer to ``allow_additional_image_properties``.
+#
+# Related options:
+#     * ``allow_additional_image_properties``
+#
+#  (integer value)
+#image_property_quota = 128
+
+#
+# Maximum number of tags allowed on an image.
+#
+# Any negative value is interpreted as unlimited.
+#
+# Related options:
+#     * None
+#
+#  (integer value)
+#image_tag_quota = 128
+
+#
+# Maximum number of locations allowed on an image.
+#
+# Any negative value is interpreted as unlimited.
+#
+# Related options:
+#     * None
+#
+#  (integer value)
+#image_location_quota = 10
+
+# DEPRECATED:
+# Python module path of data access API.
+#
+# Specifies the path to the API to use for accessing the data model.
+# This option determines how the image catalog data will be accessed.
+#
+# Possible values:
+#     * glance.db.sqlalchemy.api
+#     * glance.db.registry.api
+#     * glance.db.simple.api
+#
+# If this option is set to ``glance.db.sqlalchemy.api`` then the image
+# catalog data is stored in and read from the database via the
+# SQLAlchemy Core and ORM APIs.
+#
+# Setting this option to ``glance.db.registry.api`` will force all
+# database access requests to be routed through the Registry service.
+# This avoids data access from the Glance API nodes for an added layer
+# of security, scalability and manageability.
+#
+# NOTE: In v2 OpenStack Images API, the registry service is optional.
+# In order to use the Registry API in v2, the option
+# ``enable_v2_registry`` must be set to ``True``.
+#
+# Finally, when this configuration option is set to
+# ``glance.db.simple.api``, image catalog data is stored in and read
+# from an in-memory data structure. This is primarily used for testing.
+#
+# Related options:
+#     * enable_v2_api
+#     * enable_v2_registry
+#
+#  (string value)
+# This option is deprecated for removal since Queens.
+# Its value may be silently ignored in the future.
+# Reason:
+# Glance registry service is deprecated for removal.
+#
+# More information can be found from the spec:
+# http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance
+# /deprecate-registry.html
+#data_api = glance.db.sqlalchemy.api
+
+#
+# The default number of results to return for a request.
+#
+# Responses to certain API requests, like list images, may return
+# multiple items. The number of results returned can be explicitly
+# controlled by specifying the ``limit`` parameter in the API request.
+# However, if a ``limit`` parameter is not specified, this
+# configuration value will be used as the default number of results to
+# be returned for any API request.
+#
+# NOTES:
+#     * The value of this configuration option may not be greater than
+#       the value specified by ``api_limit_max``.
+#     * Setting this to a very large value may slow down database
+#       queries and increase response times. Setting this to a
+#       very low value may result in poor user experience.
+#
+# Possible values:
+#     * Any positive integer
+#
+# Related options:
+#     * api_limit_max
+#
+#  (integer value)
+# Minimum value: 1
+#limit_param_default = 25
+
+#
+# Maximum number of results that could be returned by a request.
+#
+# As described in the help text of ``limit_param_default``, some
+# requests may return multiple results. The number of results to be
+# returned are governed either by the ``limit`` parameter in the
+# request or the ``limit_param_default`` configuration option.
+# The value in either case, can't be greater than the absolute maximum
+# defined by this configuration option. Anything greater than this
+# value is trimmed down to the maximum value defined here.
+#
+# NOTE: Setting this to a very large value may slow down database
+#       queries and increase response times. Setting this to a
+#       very low value may result in poor user experience.
+#
+# Possible values:
+#     * Any positive integer
+#
+# Related options:
+#     * limit_param_default
+#
+#  (integer value)
+# Minimum value: 1
+#api_limit_max = 1000
+
+#
+# Show direct image location when returning an image.
+#
+# This configuration option indicates whether to show the direct image
+# location when returning image details to the user. The direct image
+# location is where the image data is stored in backend storage. This
+# image location is shown under the image property ``direct_url``.
+#
+# When multiple image locations exist for an image, the best location
+# is displayed based on the location strategy indicated by the
+# configuration option ``location_strategy``.
+#
+# NOTES:
+#     * Revealing image locations can present a GRAVE SECURITY RISK as
+#       image locations can sometimes include credentials. Hence, this
+#       is set to ``False`` by default. Set this to ``True`` with
+#       EXTREME CAUTION and ONLY IF you know what you are doing!
+#     * If an operator wishes to avoid showing any image location(s)
+#       to the user, then both this option and
+#       ``show_multiple_locations`` MUST be set to ``False``.
+#
+# Possible values:
+#     * True
+#     * False
+#
+# Related options:
+#     * show_multiple_locations
+#     * location_strategy
+#
+#  (boolean value)
+#show_image_direct_url = false
+
+# DEPRECATED:
+# Show all image locations when returning an image.
+#
+# This configuration option indicates whether to show all the image
+# locations when returning image details to the user. When multiple
+# image locations exist for an image, the locations are ordered based
+# on the location strategy indicated by the configuration opt
+# ``location_strategy``. The image locations are shown under the
+# image property ``locations``.
+#
+# NOTES:
+#     * Revealing image locations can present a GRAVE SECURITY RISK as
+#       image locations can sometimes include credentials. Hence, this
+#       is set to ``False`` by default. Set this to ``True`` with
+#       EXTREME CAUTION and ONLY IF you know what you are doing!
+#     * If an operator wishes to avoid showing any image location(s)
+#       to the user, then both this option and
+#       ``show_image_direct_url`` MUST be set to ``False``.
+#
+# Possible values:
+#     * True
+#     * False
+#
+# Related options:
+#     * show_image_direct_url
+#     * location_strategy
+#
+#  (boolean value)
+# This option is deprecated for removal since Newton.
+# Its value may be silently ignored in the future.
+# Reason: This option will be removed in the Pike release or later because the
+# same functionality can be achieved with greater granularity by using policies.
+# Please see the Newton release notes for more information.
+#show_multiple_locations = false
+
+#
+# Maximum size of image a user can upload in bytes.
+#
+# An image upload greater than the size mentioned here would result
+# in an image creation failure. This configuration option defaults to
+# 1099511627776 bytes (1 TiB).
+#
+# NOTES:
+#     * This value should only be increased after careful
+#       consideration and must be set less than or equal to
+#       8 EiB (9223372036854775808).
+#     * This value must be set with careful consideration of the
+#       backend storage capacity. Setting this to a very low value
+#       may result in a large number of image failures. And, setting
+#       this to a very large value may result in faster consumption
+#       of storage. Hence, this must be set according to the nature of
+#       images created and storage capacity available.
+#
+# Possible values:
+#     * Any positive number less than or equal to 9223372036854775808
+#
+#  (integer value)
+# Minimum value: 1
+# Maximum value: 9223372036854775808
+#image_size_cap = 1099511627776
+
+#
+# Maximum amount of image storage per tenant.
+#
+# This enforces an upper limit on the cumulative storage consumed by all images
+# of a tenant across all stores. This is a per-tenant limit.
+#
+# The default unit for this configuration option is Bytes. However, storage
+# units can be specified using case-sensitive literals ``B``, ``KB``, ``MB``,
+# ``GB`` and ``TB`` representing Bytes, KiloBytes, MegaBytes, GigaBytes and
+# TeraBytes respectively. Note that there should not be any space between the
+# value and unit. Value ``0`` signifies no quota enforcement. Negative values
+# are invalid and result in errors.
+#
+# Possible values:
+#     * A string that is a valid concatenation of a non-negative integer
+#       representing the storage value and an optional string literal
+#       representing storage units as mentioned above.
+#
+# Related options:
+#     * None
+#
+#  (string value)
+#user_storage_quota = 0
+
+#
+# Deploy the v2 OpenStack Images API.
+#
+# When this option is set to ``True``, Glance service will respond
+# to requests on registered endpoints conforming to the v2 OpenStack
+# Images API.
+#
+# NOTES:
+#     * If this option is disabled, then the ``enable_v2_registry``
+#       option, which is enabled by default, is also recommended
+#       to be disabled.
+#
+# Possible values:
+#     * True
+#     * False
+#
+# Related options:
+#     * enable_v2_registry
+#
+#  (boolean value)
+#enable_v2_api = true
+
+#
+#                     DEPRECATED FOR REMOVAL
+#  (boolean value)
+#enable_v1_registry = true
+
+# DEPRECATED:
+# Deploy the v2 API Registry service.
+#
+# When this option is set to ``True``, the Registry service
+# will be enabled in Glance for v2 API requests.
+#
+# NOTES:
+#     * Use of Registry is optional in v2 API, so this option
+#       must only be enabled if both ``enable_v2_api`` is set to
+#       ``True`` and the ``data_api`` option is set to
+#       ``glance.db.registry.api``.
+#
+#     * If deploying only the v1 OpenStack Images API, this option,
+#       which is enabled by default, should be disabled.
+#
+# Possible values:
+#     * True
+#     * False
+#
+# Related options:
+#     * enable_v2_api
+#     * data_api
+#
+#  (boolean value)
+# This option is deprecated for removal since Queens.
+# Its value may be silently ignored in the future.
+# Reason:
+# Glance registry service is deprecated for removal.
+#
+# More information can be found from the spec:
+# http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance
+# /deprecate-registry.html
+#enable_v2_registry = true
+
+#
+# Host address of the pydev server.
+#
+# Provide a string value representing the hostname or IP of the
+# pydev server to use for debugging. The pydev server listens for
+# debug connections on this address, facilitating remote debugging
+# in Glance.
+#
+# Possible values:
+#     * Valid hostname
+#     * Valid IP address
+#
+# Related options:
+#     * None
+#
+#  (host address value)
+#pydev_worker_debug_host = localhost
+
+#
+# Port number that the pydev server will listen on.
+#
+# Provide a port number to bind the pydev server to. The pydev
+# process accepts debug connections on this port and facilitates
+# remote debugging in Glance.
+#
+# Possible values:
+#     * A valid port number
+#
+# Related options:
+#     * None
+#
+#  (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#pydev_worker_debug_port = 5678
+
+#
+# AES key for encrypting store location metadata.
+#
+# Provide a string value representing the AES cipher to use for
+# encrypting Glance store metadata.
+#
+# NOTE: The AES key to use must be set to a random string of length
+# 16, 24 or 32 bytes.
+#
+# Possible values:
+#     * String value representing a valid AES key
+#
+# Related options:
+#     * None
+#
+#  (string value)
+#metadata_encryption_key = <None>
+
+#
+# Digest algorithm to use for digital signature.
+#
+# Provide a string value representing the digest algorithm to
+# use for generating digital signatures. By default, ``sha256``
+# is used.
+#
+# To get a list of the available algorithms supported by the version
+# of OpenSSL on your platform, run the command:
+# ``openssl list-message-digest-algorithms``.
+# Examples are 'sha1', 'sha256', and 'sha512'.
+#
+# NOTE: ``digest_algorithm`` is not related to Glance's image signing
+# and verification. It is only used to sign the universally unique
+# identifier (UUID) as a part of the certificate file and key file
+# validation.
+#
+# Possible values:
+#     * An OpenSSL message digest algorithm identifier
+#
+# Relation options:
+#     * None
+#
+#  (string value)
+#digest_algorithm = sha256
+
+#
+# The URL provides location where the temporary data will be stored
+#
+# This option is for Glance internal use only. Glance will save the
+# image data uploaded by the user to 'staging' endpoint during the
+# image import process.
+#
+# This option does not change the 'staging' API endpoint by any means.
+#
+# NOTE: It is discouraged to use same path as [task]/work_dir
+#
+# NOTE: 'file://<absolute-directory-path>' is the only option
+# api_image_import flow will support for now.
+#
+# NOTE: The staging path must be on shared filesystem available to all
+# Glance API nodes.
+#
+# Possible values:
+#     * String starting with 'file://' followed by absolute FS path
+#
+# Related options:
+#     * [task]/work_dir
+#
+#  (string value)
+#node_staging_uri = file:///tmp/staging/
+
+#
+# List of enabled Image Import Methods
+#
+# Both 'glance-direct' and 'web-download' are enabled by default.
+#
+# Related options:
+#     * [DEFAULT]/node_staging_uri (list value)
+#enabled_import_methods = [glance-direct,web-download]
+
+#
+# The relative path to sqlite file database that will be used for image cache
+# management.
+#
+# This is a relative path to the sqlite file database that tracks the age and
+# usage statistics of image cache. The path is relative to image cache base
+# directory, specified by the configuration option ``image_cache_dir``.
+#
+# This is a lightweight database with just one table.
+#
+# Possible values:
+#     * A valid relative path to sqlite file database
+#
+# Related options:
+#     * ``image_cache_dir``
+#
+#  (string value)
+#image_cache_sqlite_db = cache.db
+
+#
+# The driver to use for image cache management.
+#
+# This configuration option provides the flexibility to choose between the
+# different image-cache drivers available. An image-cache driver is responsible
+# for providing the essential functions of image-cache like write images to/read
+# images from cache, track age and usage of cached images, provide a list of
+# cached images, fetch size of the cache, queue images for caching and clean up
+# the cache, etc.
+#
+# The essential functions of a driver are defined in the base class
+# ``glance.image_cache.drivers.base.Driver``. All image-cache drivers (existing
+# and prospective) must implement this interface. Currently available drivers
+# are ``sqlite`` and ``xattr``. These drivers primarily differ in the way they
+# store the information about cached images:
+#     * The ``sqlite`` driver uses a sqlite database (which sits on every glance
+#     node locally) to track the usage of cached images.
+#     * The ``xattr`` driver uses the extended attributes of files to store this
+#     information. It also requires a filesystem that sets ``atime`` on the
+# files
+#     when accessed.
+#
+# Possible values:
+#     * sqlite
+#     * xattr
+#
+# Related options:
+#     * None
+#
+#  (string value)
+# Possible values:
+# sqlite - <No description provided>
+# xattr - <No description provided>
+#image_cache_driver = sqlite
+
+#
+# The upper limit on cache size, in bytes, after which the cache-pruner cleans
+# up the image cache.
+#
+# NOTE: This is just a threshold for cache-pruner to act upon. It is NOT a
+# hard limit beyond which the image cache would never grow. In fact, depending
+# on how often the cache-pruner runs and how quickly the cache fills, the image
+# cache can far exceed the size specified here very easily. Hence, care must be
+# taken to appropriately schedule the cache-pruner and in setting this limit.
+#
+# Glance caches an image when it is downloaded. Consequently, the size of the
+# image cache grows over time as the number of downloads increases. To keep the
+# cache size from becoming unmanageable, it is recommended to run the
+# cache-pruner as a periodic task. When the cache pruner is kicked off, it
+# compares the current size of image cache and triggers a cleanup if the image
+# cache grew beyond the size specified here. After the cleanup, the size of
+# cache is less than or equal to size specified here.
+#
+# Possible values:
+#     * Any non-negative integer
+#
+# Related options:
+#     * None
+#
+#  (integer value)
+# Minimum value: 0
+image_cache_max_size = {{ server.image_cache.max_size }}
+
+#
+# The amount of time, in seconds, an incomplete image remains in the cache.
+#
+# Incomplete images are images for which download is in progress. Please see the
+# description of configuration option ``image_cache_dir`` for more detail.
+# Sometimes, due to various reasons, it is possible the download may hang and
+# the incompletely downloaded image remains in the ``incomplete`` directory.
+# This configuration option sets a time limit on how long the incomplete images
+# should remain in the ``incomplete`` directory before they are cleaned up.
+# Once an incomplete image spends more time than is specified here, it'll be
+# removed by cache-cleaner on its next run.
+#
+# It is recommended to run cache-cleaner as a periodic task on the Glance API
+# nodes to keep the incomplete images from occupying disk space.
+#
+# Possible values:
+#     * Any non-negative integer
+#
+# Related options:
+#     * None
+#
+#  (integer value)
+# Minimum value: 0
+image_cache_stall_time = {{ server.image_cache.stall_time }}
+
+#
+# Base directory for image cache.
+#
+# This is the location where image data is cached and served out of. All cached
+# images are stored directly under this directory. This directory also contains
+# three subdirectories, namely, ``incomplete``, ``invalid`` and ``queue``.
+#
+# The ``incomplete`` subdirectory is the staging area for downloading images. An
+# image is first downloaded to this directory. When the image download is
+# successful it is moved to the base directory. However, if the download fails,
+# the partially downloaded image file is moved to the ``invalid`` subdirectory.
+#
+# The ``queue``subdirectory is used for queuing images for download. This is
+# used primarily by the cache-prefetcher, which can be scheduled as a periodic
+# task like cache-pruner and cache-cleaner, to cache images ahead of their
+# usage.
+# Upon receiving the request to cache an image, Glance touches a file in the
+# ``queue`` directory with the image id as the file name. The cache-prefetcher,
+# when running, polls for the files in ``queue`` directory and starts
+# downloading them in the order they were created. When the download is
+# successful, the zero-sized file is deleted from the ``queue`` directory.
+# If the download fails, the zero-sized file remains and it'll be retried the
+# next time cache-prefetcher runs.
+#
+# Possible values:
+#     * A valid path
+#
+# Related options:
+#     * ``image_cache_sqlite_db``
+#
+#  (string value)
+image_cache_dir = {{ server.image_cache.directory }}
+
+# DEPRECATED:
+# Address the registry server is hosted on.
+#
+# Possible values:
+#     * A valid IP or hostname
+#
+# Related options:
+#     * None
+#
+#  (host address value)
+# This option is deprecated for removal since Queens.
+# Its value may be silently ignored in the future.
+# Reason:
+# Glance registry service is deprecated for removal.
+#
+# More information can be found from the spec:
+# http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance
+# /deprecate-registry.html
+#registry_host = 0.0.0.0
+
+# DEPRECATED:
+# Port the registry server is listening on.
+#
+# Possible values:
+#     * A valid port number
+#
+# Related options:
+#     * None
+#
+#  (port value)
+# Minimum value: 0
+# Maximum value: 65535
+# This option is deprecated for removal since Queens.
+# Its value may be silently ignored in the future.
+# Reason:
+# Glance registry service is deprecated for removal.
+#
+# More information can be found from the spec:
+# http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance
+# /deprecate-registry.html
+#registry_port = 9191
+
+# DEPRECATED:
+# Protocol to use for communication with the registry server.
+#
+# Provide a string value representing the protocol to use for
+# communication with the registry server. By default, this option is
+# set to ``http`` and the connection is not secure.
+#
+# This option can be set to ``https`` to establish a secure connection
+# to the registry server. In this case, provide a key to use for the
+# SSL connection using the ``registry_client_key_file`` option. Also
+# include the CA file and cert file using the options
+# ``registry_client_ca_file`` and ``registry_client_cert_file``
+# respectively.
+#
+# Possible values:
+#     * http
+#     * https
+#
+# Related options:
+#     * registry_client_key_file
+#     * registry_client_cert_file
+#     * registry_client_ca_file
+#
+#  (string value)
+# Possible values:
+# http - <No description provided>
+# https - <No description provided>
+# This option is deprecated for removal since Queens.
+# Its value may be silently ignored in the future.
+# Reason:
+# Glance registry service is deprecated for removal.
+#
+# More information can be found from the spec:
+# http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance
+# /deprecate-registry.html
+#registry_client_protocol = http
+
+# DEPRECATED:
+# Absolute path to the private key file.
+#
+# Provide a string value representing a valid absolute path to the
+# private key file to use for establishing a secure connection to
+# the registry server.
+#
+# NOTE: This option must be set if ``registry_client_protocol`` is
+# set to ``https``. Alternatively, the GLANCE_CLIENT_KEY_FILE
+# environment variable may be set to a filepath of the key file.
+#
+# Possible values:
+#     * String value representing a valid absolute path to the key
+#       file.
+#
+# Related options:
+#     * registry_client_protocol
+#
+#  (string value)
+# This option is deprecated for removal since Queens.
+# Its value may be silently ignored in the future.
+# Reason:
+# Glance registry service is deprecated for removal.
+#
+# More information can be found from the spec:
+# http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance
+# /deprecate-registry.html
+#registry_client_key_file = /etc/ssl/key/key-file.pem
+
+# DEPRECATED:
+# Absolute path to the certificate file.
+#
+# Provide a string value representing a valid absolute path to the
+# certificate file to use for establishing a secure connection to
+# the registry server.
+#
+# NOTE: This option must be set if ``registry_client_protocol`` is
+# set to ``https``. Alternatively, the GLANCE_CLIENT_CERT_FILE
+# environment variable may be set to a filepath of the certificate
+# file.
+#
+# Possible values:
+#     * String value representing a valid absolute path to the
+#       certificate file.
+#
+# Related options:
+#     * registry_client_protocol
+#
+#  (string value)
+# This option is deprecated for removal since Queens.
+# Its value may be silently ignored in the future.
+# Reason:
+# Glance registry service is deprecated for removal.
+#
+# More information can be found from the spec:
+# http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance
+# /deprecate-registry.html
+#registry_client_cert_file = /etc/ssl/certs/file.crt
+
+# DEPRECATED:
+# Absolute path to the Certificate Authority file.
+#
+# Provide a string value representing a valid absolute path to the
+# certificate authority file to use for establishing a secure
+# connection to the registry server.
+#
+# NOTE: This option must be set if ``registry_client_protocol`` is
+# set to ``https``. Alternatively, the GLANCE_CLIENT_CA_FILE
+# environment variable may be set to a filepath of the CA file.
+# This option is ignored if the ``registry_client_insecure`` option
+# is set to ``True``.
+#
+# Possible values:
+#     * String value representing a valid absolute path to the CA
+#       file.
+#
+# Related options:
+#     * registry_client_protocol
+#     * registry_client_insecure
+#
+#  (string value)
+# This option is deprecated for removal since Queens.
+# Its value may be silently ignored in the future.
+# Reason:
+# Glance registry service is deprecated for removal.
+#
+# More information can be found from the spec:
+# http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance
+# /deprecate-registry.html
+#registry_client_ca_file = /etc/ssl/cafile/file.ca
+
+# DEPRECATED:
+# Set verification of the registry server certificate.
+#
+# Provide a boolean value to determine whether or not to validate
+# SSL connections to the registry server. By default, this option
+# is set to ``False`` and the SSL connections are validated.
+#
+# If set to ``True``, the connection to the registry server is not
+# validated via a certifying authority and the
+# ``registry_client_ca_file`` option is ignored. This is the
+# registry's equivalent of specifying --insecure on the command line
+# using glanceclient for the API.
+#
+# Possible values:
+#     * True
+#     * False
+#
+# Related options:
+#     * registry_client_protocol
+#     * registry_client_ca_file
+#
+#  (boolean value)
+# This option is deprecated for removal since Queens.
+# Its value may be silently ignored in the future.
+# Reason:
+# Glance registry service is deprecated for removal.
+#
+# More information can be found from the spec:
+# http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance
+# /deprecate-registry.html
+#registry_client_insecure = false
+
+# DEPRECATED:
+# Timeout value for registry requests.
+#
+# Provide an integer value representing the period of time in seconds
+# that the API server will wait for a registry request to complete.
+# The default value is 600 seconds.
+#
+# A value of 0 implies that a request will never timeout.
+#
+# Possible values:
+#     * Zero
+#     * Positive integer
+#
+# Related options:
+#     * None
+#
+#  (integer value)
+# Minimum value: 0
+# This option is deprecated for removal since Queens.
+# Its value may be silently ignored in the future.
+# Reason:
+# Glance registry service is deprecated for removal.
+#
+# More information can be found from the spec:
+# http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance
+# /deprecate-registry.html
+#registry_client_timeout = 600
+
+# DEPRECATED: Whether to pass through the user token when making requests to the
+# registry. To prevent failures with token expiration during big files upload,
+# it is recommended to set this parameter to False.If "use_user_token" is not in
+# effect, then admin credentials can be specified. (boolean value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: This option was considered harmful and has been deprecated in M
+# release. It will be removed in O release. For more information read OSSN-0060.
+# Related functionality with uploading big images has been implemented with
+# Keystone trusts support.
+#use_user_token = true
+
+# DEPRECATED: The administrators user name. If "use_user_token" is not in
+# effect, then admin credentials can be specified. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: This option was considered harmful and has been deprecated in M
+# release. It will be removed in O release. For more information read OSSN-0060.
+# Related functionality with uploading big images has been implemented with
+# Keystone trusts support.
+#admin_user = <None>
+
+# DEPRECATED: The administrators password. If "use_user_token" is not in effect,
+# then admin credentials can be specified. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: This option was considered harmful and has been deprecated in M
+# release. It will be removed in O release. For more information read OSSN-0060.
+# Related functionality with uploading big images has been implemented with
+# Keystone trusts support.
+#admin_password = <None>
+
+# DEPRECATED: The tenant name of the administrative user. If "use_user_token" is
+# not in effect, then admin tenant name can be specified. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: This option was considered harmful and has been deprecated in M
+# release. It will be removed in O release. For more information read OSSN-0060.
+# Related functionality with uploading big images has been implemented with
+# Keystone trusts support.
+#admin_tenant_name = <None>
+
+# DEPRECATED: The URL to the keystone service. If "use_user_token" is not in
+# effect and using keystone auth, then URL of keystone can be specified. (string
+# value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: This option was considered harmful and has been deprecated in M
+# release. It will be removed in O release. For more information read OSSN-0060.
+# Related functionality with uploading big images has been implemented with
+# Keystone trusts support.
+#auth_url = <None>
+
+# DEPRECATED: The strategy to use for authentication. If "use_user_token" is not
+# in effect, then auth strategy can be specified. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: This option was considered harmful and has been deprecated in M
+# release. It will be removed in O release. For more information read OSSN-0060.
+# Related functionality with uploading big images has been implemented with
+# Keystone trusts support.
+#auth_strategy = noauth
+
+# DEPRECATED: The region for the authentication service. If "use_user_token" is
+# not in effect and using keystone auth, then region name can be specified.
+# (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: This option was considered harmful and has been deprecated in M
+# release. It will be removed in O release. For more information read OSSN-0060.
+# Related functionality with uploading big images has been implemented with
+# Keystone trusts support.
+#auth_region = <None>
+
+{%- if server.logging is defined %}
+{%- set _data = server.logging %}
+{%- do _data.update({'log_file': '/var/log/glance/image-cache.log'}) %}
+{%- include "oslo_templates/files/" ~ server.version ~ "/oslo/_log.conf" %}
+{%- endif %}
+
+
+[glance_store]
+
+#
+# From glance.store
+#
+
+# DEPRECATED:
+# List of enabled Glance stores.
+#
+# Register the storage backends to use for storing disk images
+# as a comma separated list. The default stores enabled for
+# storing disk images with Glance are ``file`` and ``http``.
+#
+# Possible values:
+#     * A comma separated list that could include:
+#         * file
+#         * http
+#         * swift
+#         * rbd
+#         * sheepdog
+#         * cinder
+#         * vmware
+#
+# Related Options:
+#     * default_store
+#
+#  (list value)
+# This option is deprecated for removal since Rocky.
+# Its value may be silently ignored in the future.
+# Reason:
+# This option is deprecated against new config option
+# ``enabled_backends`` which helps to configure multiple backend stores
+# of different schemes.
+#
+# This option is scheduled for removal in the Stein development
+# cycle.
+#stores = file,http
+
+# DEPRECATED:
+# The default scheme to use for storing images.
+#
+# Provide a string value representing the default scheme to use for
+# storing images. If not set, Glance uses ``file`` as the default
+# scheme to store images with the ``file`` store.
+#
+# NOTE: The value given for this configuration option must be a valid
+# scheme for a store registered with the ``stores`` configuration
+# option.
+#
+# Possible values:
+#     * file
+#     * filesystem
+#     * http
+#     * https
+#     * swift
+#     * swift+http
+#     * swift+https
+#     * swift+config
+#     * rbd
+#     * sheepdog
+#     * cinder
+#     * vsphere
+#
+# Related Options:
+#     * stores
+#
+#  (string value)
+# Possible values:
+# file - <No description provided>
+# filesystem - <No description provided>
+# http - <No description provided>
+# https - <No description provided>
+# swift - <No description provided>
+# swift+http - <No description provided>
+# swift+https - <No description provided>
+# swift+config - <No description provided>
+# rbd - <No description provided>
+# sheepdog - <No description provided>
+# cinder - <No description provided>
+# vsphere - <No description provided>
+# This option is deprecated for removal since Rocky.
+# Its value may be silently ignored in the future.
+# Reason:
+# This option is deprecated against new config option
+# ``default_backend`` which acts similar to ``default_store`` config
+# option.
+#
+# This option is scheduled for removal in the Stein development
+# cycle.
+#default_store = file
+
+# DEPRECATED:
+# Minimum interval in seconds to execute updating dynamic storage
+# capabilities based on current backend status.
+#
+# Provide an integer value representing time in seconds to set the
+# minimum interval before an update of dynamic storage capabilities
+# for a storage backend can be attempted. Setting
+# ``store_capabilities_update_min_interval`` does not mean updates
+# occur periodically based on the set interval. Rather, the update
+# is performed at the elapse of this interval set, if an operation
+# of the store is triggered.
+#
+# By default, this option is set to zero and is disabled. Provide an
+# integer value greater than zero to enable this option.
+#
+# NOTE 1: For more information on store capabilities and their updates,
+# please visit: https://specs.openstack.org/openstack/glance-specs/specs/kilo
+# /store-capabilities.html
+#
+# For more information on setting up a particular store in your
+# deployment and help with the usage of this feature, please contact
+# the storage driver maintainers listed here:
+# https://docs.openstack.org/glance_store/latest/user/drivers.html
+#
+# NOTE 2: The dynamic store update capability described above is not
+# implemented by any current store drivers.  Thus, this option DOES
+# NOT DO ANYTHING (and it never has).  It is DEPRECATED and scheduled
+# for removal early in the Stein development cycle.
+#
+# Possible values:
+#     * Zero
+#     * Positive integer
+#
+# Related Options:
+#     * None
+#
+#  (integer value)
+# Minimum value: 0
+# This option is deprecated for removal since Rocky.
+# Its value may be silently ignored in the future.
+# Reason:
+# This option configures a stub method that has not been implemented
+# for any existing store drivers.  Hence it is non-operational, and
+# giving it a value does absolutely nothing.
+#
+# This option is scheduled for removal early in the Stein development
+# cycle.
+#store_capabilities_update_min_interval = 0
+
+#
+# Information to match when looking for cinder in the service catalog.
+#
+# When the ``cinder_endpoint_template`` is not set and any of
+# ``cinder_store_auth_address``, ``cinder_store_user_name``,
+# ``cinder_store_project_name``, ``cinder_store_password`` is not set,
+# cinder store uses this information to lookup cinder endpoint from the service
+# catalog in the current context. ``cinder_os_region_name``, if set, is taken
+# into consideration to fetch the appropriate endpoint.
+#
+# The service catalog can be listed by the ``openstack catalog list`` command.
+#
+# Possible values:
+#     * A string of of the following form:
+#       ``<service_type>:<service_name>:<interface>``
+#       At least ``service_type`` and ``interface`` should be specified.
+#       ``service_name`` can be omitted.
+#
+# Related options:
+#     * cinder_os_region_name
+#     * cinder_endpoint_template
+#     * cinder_store_auth_address
+#     * cinder_store_user_name
+#     * cinder_store_project_name
+#     * cinder_store_password
+#
+#  (string value)
+#cinder_catalog_info = volumev2::publicURL
+
+#
+# Override service catalog lookup with template for cinder endpoint.
+#
+# When this option is set, this value is used to generate cinder endpoint,
+# instead of looking up from the service catalog.
+# This value is ignored if ``cinder_store_auth_address``,
+# ``cinder_store_user_name``, ``cinder_store_project_name``, and
+# ``cinder_store_password`` are specified.
+#
+# If this configuration option is set, ``cinder_catalog_info`` will be ignored.
+#
+# Possible values:
+#     * URL template string for cinder endpoint, where ``%%(tenant)s`` is
+#       replaced with the current tenant (project) name.
+#       For example: ``http://cinder.openstack.example.org/v2/%%(tenant)s``
+#
+# Related options:
+#     * cinder_store_auth_address
+#     * cinder_store_user_name
+#     * cinder_store_project_name
+#     * cinder_store_password
+#     * cinder_catalog_info
+#
+#  (string value)
+#cinder_endpoint_template = <None>
+
+#
+# Region name to lookup cinder service from the service catalog.
+#
+# This is used only when ``cinder_catalog_info`` is used for determining the
+# endpoint. If set, the lookup for cinder endpoint by this node is filtered to
+# the specified region. It is useful when multiple regions are listed in the
+# catalog. If this is not set, the endpoint is looked up from every region.
+#
+# Possible values:
+#     * A string that is a valid region name.
+#
+# Related options:
+#     * cinder_catalog_info
+#
+#  (string value)
+# Deprecated group/name - [glance_store]/os_region_name
+#cinder_os_region_name = <None>
+{% if server.identity.region is defined %}
+cinder_os_region_name = {{ server.identity.region }}
+{% endif %}
+
+#
+# Location of a CA certificates file used for cinder client requests.
+#
+# The specified CA certificates file, if set, is used to verify cinder
+# connections via HTTPS endpoint. If the endpoint is HTTP, this value is
+# ignored.
+# ``cinder_api_insecure`` must be set to ``True`` to enable the verification.
+#
+# Possible values:
+#     * Path to a ca certificates file
+#
+# Related options:
+#     * cinder_api_insecure
+#
+#  (string value)
+#cinder_ca_certificates_file = <None>
+
+#
+# Number of cinderclient retries on failed http calls.
+#
+# When a call failed by any errors, cinderclient will retry the call up to the
+# specified times after sleeping a few seconds.
+#
+# Possible values:
+#     * A positive integer
+#
+# Related options:
+#     * None
+#
+#  (integer value)
+# Minimum value: 0
+#cinder_http_retries = 3
+
+#
+# Time period, in seconds, to wait for a cinder volume transition to
+# complete.
+#
+# When the cinder volume is created, deleted, or attached to the glance node to
+# read/write the volume data, the volume's state is changed. For example, the
+# newly created volume status changes from ``creating`` to ``available`` after
+# the creation process is completed. This specifies the maximum time to wait for
+# the status change. If a timeout occurs while waiting, or the status is changed
+# to an unexpected value (e.g. `error``), the image creation fails.
+#
+# Possible values:
+#     * A positive integer
+#
+# Related options:
+#     * None
+#
+#  (integer value)
+# Minimum value: 0
+#cinder_state_transition_timeout = 300
+
+#
+# Allow to perform insecure SSL requests to cinder.
+#
+# If this option is set to True, HTTPS endpoint connection is verified using the
+# CA certificates file specified by ``cinder_ca_certificates_file`` option.
+#
+# Possible values:
+#     * True
+#     * False
+#
+# Related options:
+#     * cinder_ca_certificates_file
+#
+#  (boolean value)
+#cinder_api_insecure = false
+
+#
+# The address where the cinder authentication service is listening.
+#
+# When all of ``cinder_store_auth_address``, ``cinder_store_user_name``,
+# ``cinder_store_project_name``, and ``cinder_store_password`` options are
+# specified, the specified values are always used for the authentication.
+# This is useful to hide the image volumes from users by storing them in a
+# project/tenant specific to the image service. It also enables users to share
+# the image volume among other projects under the control of glance's ACL.
+#
+# If either of these options are not set, the cinder endpoint is looked up
+# from the service catalog, and current context's user and project are used.
+#
+# Possible values:
+#     * A valid authentication service address, for example:
+#       ``http://openstack.example.org/identity/v2.0``
+#
+# Related options:
+#     * cinder_store_user_name
+#     * cinder_store_password
+#     * cinder_store_project_name
+#
+#  (string value)
+#cinder_store_auth_address = <None>
+
+#
+# User name to authenticate against cinder.
+#
+# This must be used with all the following related options. If any of these are
+# not specified, the user of the current context is used.
+#
+# Possible values:
+#     * A valid user name
+#
+# Related options:
+#     * cinder_store_auth_address
+#     * cinder_store_password
+#     * cinder_store_project_name
+#
+#  (string value)
+#cinder_store_user_name = <None>
+
+#
+# Password for the user authenticating against cinder.
+#
+# This must be used with all the following related options. If any of these are
+# not specified, the user of the current context is used.
+#
+# Possible values:
+#     * A valid password for the user specified by ``cinder_store_user_name``
+#
+# Related options:
+#     * cinder_store_auth_address
+#     * cinder_store_user_name
+#     * cinder_store_project_name
+#
+#  (string value)
+#cinder_store_password = <None>
+
+#
+# Project name where the image volume is stored in cinder.
+#
+# If this configuration option is not set, the project in current context is
+# used.
+#
+# This must be used with all the following related options. If any of these are
+# not specified, the project of the current context is used.
+#
+# Possible values:
+#     * A valid project name
+#
+# Related options:
+#     * ``cinder_store_auth_address``
+#     * ``cinder_store_user_name``
+#     * ``cinder_store_password``
+#
+#  (string value)
+#cinder_store_project_name = <None>
+
+#
+# Path to the rootwrap configuration file to use for running commands as root.
+#
+# The cinder store requires root privileges to operate the image volumes (for
+# connecting to iSCSI/FC volumes and reading/writing the volume data, etc.).
+# The configuration file should allow the required commands by cinder store and
+# os-brick library.
+#
+# Possible values:
+#     * Path to the rootwrap config file
+#
+# Related options:
+#     * None
+#
+#  (string value)
+#rootwrap_config = /etc/glance/rootwrap.conf
+
+#
+# Volume type that will be used for volume creation in cinder.
+#
+# Some cinder backends can have several volume types to optimize storage usage.
+# Adding this option allows an operator to choose a specific volume type
+# in cinder that can be optimized for images.
+#
+# If this is not set, then the default volume type specified in the cinder
+# configuration will be used for volume creation.
+#
+# Possible values:
+#     * A valid volume type from cinder
+#
+# Related options:
+#     * None
+#
+#  (string value)
+#cinder_volume_type = <None>
+
+#
+# Directory to which the filesystem backend store writes images.
+#
+# Upon start up, Glance creates the directory if it doesn't already
+# exist and verifies write access to the user under which
+# ``glance-api`` runs. If the write access isn't available, a
+# ``BadStoreConfiguration`` exception is raised and the filesystem
+# store may not be available for adding new images.
+#
+# NOTE: This directory is used only when filesystem store is used as a
+# storage backend. Either ``filesystem_store_datadir`` or
+# ``filesystem_store_datadirs`` option must be specified in
+# ``glance-api.conf``. If both options are specified, a
+# ``BadStoreConfiguration`` will be raised and the filesystem store
+# may not be available for adding new images.
+#
+# Possible values:
+#     * A valid path to a directory
+#
+# Related options:
+#     * ``filesystem_store_datadirs``
+#     * ``filesystem_store_file_perm``
+#
+#  (string value)
+#filesystem_store_datadir = /var/lib/glance/images
+
+#
+# List of directories and their priorities to which the filesystem
+# backend store writes images.
+#
+# The filesystem store can be configured to store images in multiple
+# directories as opposed to using a single directory specified by the
+# ``filesystem_store_datadir`` configuration option. When using
+# multiple directories, each directory can be given an optional
+# priority to specify the preference order in which they should
+# be used. Priority is an integer that is concatenated to the
+# directory path with a colon where a higher value indicates higher
+# priority. When two directories have the same priority, the directory
+# with most free space is used. When no priority is specified, it
+# defaults to zero.
+#
+# More information on configuring filesystem store with multiple store
+# directories can be found at
+# https://docs.openstack.org/glance/latest/configuration/configuring.html
+#
+# NOTE: This directory is used only when filesystem store is used as a
+# storage backend. Either ``filesystem_store_datadir`` or
+# ``filesystem_store_datadirs`` option must be specified in
+# ``glance-api.conf``. If both options are specified, a
+# ``BadStoreConfiguration`` will be raised and the filesystem store
+# may not be available for adding new images.
+#
+# Possible values:
+#     * List of strings of the following form:
+#         * ``<a valid directory path>:<optional integer priority>``
+#
+# Related options:
+#     * ``filesystem_store_datadir``
+#     * ``filesystem_store_file_perm``
+#
+#  (multi valued)
+#filesystem_store_datadirs =
+
+#
+# Filesystem store metadata file.
+#
+# The path to a file which contains the metadata to be returned with
+# any location associated with the filesystem store. The file must
+# contain a valid JSON object. The object should contain the keys
+# ``id`` and ``mountpoint``. The value for both keys should be a
+# string.
+#
+# Possible values:
+#     * A valid path to the store metadata file
+#
+# Related options:
+#     * None
+#
+#  (string value)
+#filesystem_store_metadata_file = <None>
+{%- if server.filesystem_store_metadata_file is defined %}
+filesystem_store_metadata_file = {{ server.get('filesystem_store_metadata_file', '/etc/glance/filesystem_store_metadata.json') }}
+{%- endif %}
+
+#
+# File access permissions for the image files.
+#
+# Set the intended file access permissions for image data. This provides
+# a way to enable other services, e.g. Nova, to consume images directly
+# from the filesystem store. The users running the services that are
+# intended to be given access to could be made a member of the group
+# that owns the files created. Assigning a value less then or equal to
+# zero for this configuration option signifies that no changes be made
+# to the  default permissions. This value will be decoded as an octal
+# digit.
+#
+# For more information, please refer the documentation at
+# https://docs.openstack.org/glance/latest/configuration/configuring.html
+#
+# Possible values:
+#     * A valid file access permission
+#     * Zero
+#     * Any negative integer
+#
+# Related options:
+#     * None
+#
+#  (integer value)
+#filesystem_store_file_perm = 0
+
+#
+# Path to the CA bundle file.
+#
+# This configuration option enables the operator to use a custom
+# Certificate Authority file to verify the remote server certificate. If
+# this option is set, the ``https_insecure`` option will be ignored and
+# the CA file specified will be used to authenticate the server
+# certificate and establish a secure connection to the server.
+#
+# Possible values:
+#     * A valid path to a CA file
+#
+# Related options:
+#     * https_insecure
+#
+#  (string value)
+#https_ca_certificates_file = <None>
+
+#
+# Set verification of the remote server certificate.
+#
+# This configuration option takes in a boolean value to determine
+# whether or not to verify the remote server certificate. If set to
+# True, the remote server certificate is not verified. If the option is
+# set to False, then the default CA truststore is used for verification.
+#
+# This option is ignored if ``https_ca_certificates_file`` is set.
+# The remote server certificate will then be verified using the file
+# specified using the ``https_ca_certificates_file`` option.
+#
+# Possible values:
+#     * True
+#     * False
+#
+# Related options:
+#     * https_ca_certificates_file
+#
+#  (boolean value)
+#https_insecure = true
+
+#
+# The http/https proxy information to be used to connect to the remote
+# server.
+#
+# This configuration option specifies the http/https proxy information
+# that should be used to connect to the remote server. The proxy
+# information should be a key value pair of the scheme and proxy, for
+# example, http:10.0.0.1:3128. You can also specify proxies for multiple
+# schemes by separating the key value pairs with a comma, for example,
+# http:10.0.0.1:3128, https:10.0.0.1:1080.
+#
+# Possible values:
+#     * A comma separated list of scheme:proxy pairs as described above
+#
+# Related options:
+#     * None
+#
+#  (dict value)
+#http_proxy_information =
+
+#
+# Size, in megabytes, to chunk RADOS images into.
+#
+# Provide an integer value representing the size in megabytes to chunk
+# Glance images into. The default chunk size is 8 megabytes. For optimal
+# performance, the value should be a power of two.
+#
+# When Ceph's RBD object storage system is used as the storage backend
+# for storing Glance images, the images are chunked into objects of the
+# size set using this option. These chunked objects are then stored
+# across the distributed block data store to use for Glance.
+#
+# Possible Values:
+#     * Any positive integer value
+#
+# Related options:
+#     * None
+#
+#  (integer value)
+# Minimum value: 1
+#rbd_store_chunk_size = 8
+
+#
+# RADOS pool in which images are stored.
+#
+# When RBD is used as the storage backend for storing Glance images, the
+# images are stored by means of logical grouping of the objects (chunks
+# of images) into a ``pool``. Each pool is defined with the number of
+# placement groups it can contain. The default pool that is used is
+# 'images'.
+#
+# More information on the RBD storage backend can be found here:
+# http://ceph.com/planet/how-data-is-stored-in-ceph-cluster/
+#
+# Possible Values:
+#     * A valid pool name
+#
+# Related options:
+#     * None
+#
+#  (string value)
+#rbd_store_pool = images
+
+#
+# RADOS user to authenticate as.
+#
+# This configuration option takes in the RADOS user to authenticate as.
+# This is only needed when RADOS authentication is enabled and is
+# applicable only if the user is using Cephx authentication. If the
+# value for this option is not set by the user or is set to None, a
+# default value will be chosen, which will be based on the client.
+# section in rbd_store_ceph_conf.
+#
+# Possible Values:
+#     * A valid RADOS user
+#
+# Related options:
+#     * rbd_store_ceph_conf
+#
+#  (string value)
+#rbd_store_user = <None>
+
+#
+# Ceph configuration file path.
+#
+# This configuration option takes in the path to the Ceph configuration
+# file to be used. If the value for this option is not set by the user
+# or is set to None, librados will locate the default configuration file
+# which is located at /etc/ceph/ceph.conf. If using Cephx
+# authentication, this file should include a reference to the right
+# keyring in a client.<USER> section
+#
+# Possible Values:
+#     * A valid path to a configuration file
+#
+# Related options:
+#     * rbd_store_user
+#
+#  (string value)
+#rbd_store_ceph_conf = /etc/ceph/ceph.conf
+
+#
+# Timeout value for connecting to Ceph cluster.
+#
+# This configuration option takes in the timeout value in seconds used
+# when connecting to the Ceph cluster i.e. it sets the time to wait for
+# glance-api before closing the connection. This prevents glance-api
+# hangups during the connection to RBD. If the value for this option
+# is set to less than or equal to 0, no timeout is set and the default
+# librados value is used.
+#
+# Possible Values:
+#     * Any integer value
+#
+# Related options:
+#     * None
+#
+#  (integer value)
+#rados_connect_timeout = 0
+
+#
+# Chunk size for images to be stored in Sheepdog data store.
+#
+# Provide an integer value representing the size in mebibyte
+# (1048576 bytes) to chunk Glance images into. The default
+# chunk size is 64 mebibytes.
+#
+# When using Sheepdog distributed storage system, the images are
+# chunked into objects of this size and then stored across the
+# distributed data store to use for Glance.
+#
+# Chunk sizes, if a power of two, help avoid fragmentation and
+# enable improved performance.
+#
+# Possible values:
+#     * Positive integer value representing size in mebibytes.
+#
+# Related Options:
+#     * None
+#
+#  (integer value)
+# Minimum value: 1
+#sheepdog_store_chunk_size = 64
+
+#
+# Port number on which the sheep daemon will listen.
+#
+# Provide an integer value representing a valid port number on
+# which you want the Sheepdog daemon to listen on. The default
+# port is 7000.
+#
+# The Sheepdog daemon, also called 'sheep', manages the storage
+# in the distributed cluster by writing objects across the storage
+# network. It identifies and acts on the messages it receives on
+# the port number set using ``sheepdog_store_port`` option to store
+# chunks of Glance images.
+#
+# Possible values:
+#     * A valid port number (0 to 65535)
+#
+# Related Options:
+#     * sheepdog_store_address
+#
+#  (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#sheepdog_store_port = 7000
+
+#
+# Address to bind the Sheepdog daemon to.
+#
+# Provide a string value representing the address to bind the
+# Sheepdog daemon to. The default address set for the 'sheep'
+# is 127.0.0.1.
+#
+# The Sheepdog daemon, also called 'sheep', manages the storage
+# in the distributed cluster by writing objects across the storage
+# network. It identifies and acts on the messages directed to the
+# address set using ``sheepdog_store_address`` option to store
+# chunks of Glance images.
+#
+# Possible values:
+#     * A valid IPv4 address
+#     * A valid IPv6 address
+#     * A valid hostname
+#
+# Related Options:
+#     * sheepdog_store_port
+#
+#  (host address value)
+#sheepdog_store_address = 127.0.0.1
+
+#
+# Set verification of the server certificate.
+#
+# This boolean determines whether or not to verify the server
+# certificate. If this option is set to True, swiftclient won't check
+# for a valid SSL certificate when authenticating. If the option is set
+# to False, then the default CA truststore is used for verification.
+#
+# Possible values:
+#     * True
+#     * False
+#
+# Related options:
+#     * swift_store_cacert
+#
+#  (boolean value)
+#swift_store_auth_insecure = false
+
+#
+# Path to the CA bundle file.
+#
+# This configuration option enables the operator to specify the path to
+# a custom Certificate Authority file for SSL verification when
+# connecting to Swift.
+#
+# Possible values:
+#     * A valid path to a CA file
+#
+# Related options:
+#     * swift_store_auth_insecure
+#
+#  (string value)
+#swift_store_cacert = /etc/ssl/certs/ca-certificates.crt
+
+#
+# The region of Swift endpoint to use by Glance.
+#
+# Provide a string value representing a Swift region where Glance
+# can connect to for image storage. By default, there is no region
+# set.
+#
+# When Glance uses Swift as the storage backend to store images
+# for a specific tenant that has multiple endpoints, setting of a
+# Swift region with ``swift_store_region`` allows Glance to connect
+# to Swift in the specified region as opposed to a single region
+# connectivity.
+#
+# This option can be configured for both single-tenant and
+# multi-tenant storage.
+#
+# NOTE: Setting the region with ``swift_store_region`` is
+# tenant-specific and is necessary ``only if`` the tenant has
+# multiple endpoints across different regions.
+#
+# Possible values:
+#     * A string value representing a valid Swift region.
+#
+# Related Options:
+#     * None
+#
+#  (string value)
+#swift_store_region = RegionTwo
+
+#
+# The URL endpoint to use for Swift backend storage.
+#
+# Provide a string value representing the URL endpoint to use for
+# storing Glance images in Swift store. By default, an endpoint
+# is not set and the storage URL returned by ``auth`` is used.
+# Setting an endpoint with ``swift_store_endpoint`` overrides the
+# storage URL and is used for Glance image storage.
+#
+# NOTE: The URL should include the path up to, but excluding the
+# container. The location of an object is obtained by appending
+# the container and object to the configured URL.
+#
+# Possible values:
+#     * String value representing a valid URL path up to a Swift container
+#
+# Related Options:
+#     * None
+#
+#  (string value)
+#swift_store_endpoint = https://swift.openstack.example.org/v1/path_not_including_container_name
+
+#
+# Endpoint Type of Swift service.
+#
+# This string value indicates the endpoint type to use to fetch the
+# Swift endpoint. The endpoint type determines the actions the user will
+# be allowed to perform, for instance, reading and writing to the Store.
+# This setting is only used if swift_store_auth_version is greater than
+# 1.
+#
+# Possible values:
+#     * publicURL
+#     * adminURL
+#     * internalURL
+#
+# Related options:
+#     * swift_store_endpoint
+#
+#  (string value)
+# Possible values:
+# publicURL - <No description provided>
+# adminURL - <No description provided>
+# internalURL - <No description provided>
+#swift_store_endpoint_type = publicURL
+
+#
+# Type of Swift service to use.
+#
+# Provide a string value representing the service type to use for
+# storing images while using Swift backend storage. The default
+# service type is set to ``object-store``.
+#
+# NOTE: If ``swift_store_auth_version`` is set to 2, the value for
+# this configuration option needs to be ``object-store``. If using
+# a higher version of Keystone or a different auth scheme, this
+# option may be modified.
+#
+# Possible values:
+#     * A string representing a valid service type for Swift storage.
+#
+# Related Options:
+#     * None
+#
+#  (string value)
+#swift_store_service_type = object-store
+
+#
+# Name of single container to store images/name prefix for multiple containers
+#
+# When a single container is being used to store images, this configuration
+# option indicates the container within the Glance account to be used for
+# storing all images. When multiple containers are used to store images, this
+# will be the name prefix for all containers. Usage of single/multiple
+# containers can be controlled using the configuration option
+# ``swift_store_multiple_containers_seed``.
+#
+# When using multiple containers, the containers will be named after the value
+# set for this configuration option with the first N chars of the image UUID
+# as the suffix delimited by an underscore (where N is specified by
+# ``swift_store_multiple_containers_seed``).
+#
+# Example: if the seed is set to 3 and swift_store_container = ``glance``, then
+# an image with UUID ``fdae39a1-bac5-4238-aba4-69bcc726e848`` would be placed in
+# the container ``glance_fda``. All dashes in the UUID are included when
+# creating the container name but do not count toward the character limit, so
+# when N=10 the container name would be ``glance_fdae39a1-ba.``
+#
+# Possible values:
+#     * If using single container, this configuration option can be any string
+#       that is a valid swift container name in Glance's Swift account
+#     * If using multiple containers, this configuration option can be any
+#       string as long as it satisfies the container naming rules enforced by
+#       Swift. The value of ``swift_store_multiple_containers_seed`` should be
+#       taken into account as well.
+#
+# Related options:
+#     * ``swift_store_multiple_containers_seed``
+#     * ``swift_store_multi_tenant``
+#     * ``swift_store_create_container_on_put``
+#
+#  (string value)
+#swift_store_container = glance
+
+#
+# The size threshold, in MB, after which Glance will start segmenting image
+# data.
+#
+# Swift has an upper limit on the size of a single uploaded object. By default,
+# this is 5GB. To upload objects bigger than this limit, objects are segmented
+# into multiple smaller objects that are tied together with a manifest file.
+# For more detail, refer to
+# https://docs.openstack.org/swift/latest/overview_large_objects.html
+#
+# This configuration option specifies the size threshold over which the Swift
+# driver will start segmenting image data into multiple smaller files.
+# Currently, the Swift driver only supports creating Dynamic Large Objects.
+#
+# NOTE: This should be set by taking into account the large object limit
+# enforced by the Swift cluster in consideration.
+#
+# Possible values:
+#     * A positive integer that is less than or equal to the large object limit
+#       enforced by the Swift cluster in consideration.
+#
+# Related options:
+#     * ``swift_store_large_object_chunk_size``
+#
+#  (integer value)
+# Minimum value: 1
+#swift_store_large_object_size = 5120
+
+#
+# The maximum size, in MB, of the segments when image data is segmented.
+#
+# When image data is segmented to upload images that are larger than the limit
+# enforced by the Swift cluster, image data is broken into segments that are no
+# bigger than the size specified by this configuration option.
+# Refer to ``swift_store_large_object_size`` for more detail.
+#
+# For example: if ``swift_store_large_object_size`` is 5GB and
+# ``swift_store_large_object_chunk_size`` is 1GB, an image of size 6.2GB will be
+# segmented into 7 segments where the first six segments will be 1GB in size and
+# the seventh segment will be 0.2GB.
+#
+# Possible values:
+#     * A positive integer that is less than or equal to the large object limit
+#       enforced by Swift cluster in consideration.
+#
+# Related options:
+#     * ``swift_store_large_object_size``
+#
+#  (integer value)
+# Minimum value: 1
+#swift_store_large_object_chunk_size = 200
+
+#
+# Create container, if it doesn't already exist, when uploading image.
+#
+# At the time of uploading an image, if the corresponding container doesn't
+# exist, it will be created provided this configuration option is set to True.
+# By default, it won't be created. This behavior is applicable for both single
+# and multiple containers mode.
+#
+# Possible values:
+#     * True
+#     * False
+#
+# Related options:
+#     * None
+#
+#  (boolean value)
+#swift_store_create_container_on_put = false
+
+#
+# Store images in tenant's Swift account.
+#
+# This enables multi-tenant storage mode which causes Glance images to be stored
+# in tenant specific Swift accounts. If this is disabled, Glance stores all
+# images in its own account. More details multi-tenant store can be found at
+# https://wiki.openstack.org/wiki/GlanceSwiftTenantSpecificStorage
+#
+# NOTE: If using multi-tenant swift store, please make sure
+# that you do not set a swift configuration file with the
+# 'swift_store_config_file' option.
+#
+# Possible values:
+#     * True
+#     * False
+#
+# Related options:
+#     * swift_store_config_file
+#
+#  (boolean value)
+#swift_store_multi_tenant = false
+
+#
+# Seed indicating the number of containers to use for storing images.
+#
+# When using a single-tenant store, images can be stored in one or more than one
+# containers. When set to 0, all images will be stored in one single container.
+# When set to an integer value between 1 and 32, multiple containers will be
+# used to store images. This configuration option will determine how many
+# containers are created. The total number of containers that will be used is
+# equal to 16^N, so if this config option is set to 2, then 16^2=256 containers
+# will be used to store images.
+#
+# Please refer to ``swift_store_container`` for more detail on the naming
+# convention. More detail about using multiple containers can be found at
+# https://specs.openstack.org/openstack/glance-specs/specs/kilo/swift-store-
+# multiple-containers.html
+#
+# NOTE: This is used only when swift_store_multi_tenant is disabled.
+#
+# Possible values:
+#     * A non-negative integer less than or equal to 32
+#
+# Related options:
+#     * ``swift_store_container``
+#     * ``swift_store_multi_tenant``
+#     * ``swift_store_create_container_on_put``
+#
+#  (integer value)
+# Minimum value: 0
+# Maximum value: 32
+#swift_store_multiple_containers_seed = 0
+
+#
+# List of tenants that will be granted admin access.
+#
+# This is a list of tenants that will be granted read/write access on
+# all Swift containers created by Glance in multi-tenant mode. The
+# default value is an empty list.
+#
+# Possible values:
+#     * A comma separated list of strings representing UUIDs of Keystone
+#       projects/tenants
+#
+# Related options:
+#     * None
+#
+#  (list value)
+#swift_store_admin_tenants =
+
+#
+# SSL layer compression for HTTPS Swift requests.
+#
+# Provide a boolean value to determine whether or not to compress
+# HTTPS Swift requests for images at the SSL layer. By default,
+# compression is enabled.
+#
+# When using Swift as the backend store for Glance image storage,
+# SSL layer compression of HTTPS Swift requests can be set using
+# this option. If set to False, SSL layer compression of HTTPS
+# Swift requests is disabled. Disabling this option may improve
+# performance for images which are already in a compressed format,
+# for example, qcow2.
+#
+# Possible values:
+#     * True
+#     * False
+#
+# Related Options:
+#     * None
+#
+#  (boolean value)
+#swift_store_ssl_compression = true
+
+#
+# The number of times a Swift download will be retried before the
+# request fails.
+#
+# Provide an integer value representing the number of times an image
+# download must be retried before erroring out. The default value is
+# zero (no retry on a failed image download). When set to a positive
+# integer value, ``swift_store_retry_get_count`` ensures that the
+# download is attempted this many more times upon a download failure
+# before sending an error message.
+#
+# Possible values:
+#     * Zero
+#     * Positive integer value
+#
+# Related Options:
+#     * None
+#
+#  (integer value)
+# Minimum value: 0
+#swift_store_retry_get_count = 0
+
+#
+# Time in seconds defining the size of the window in which a new
+# token may be requested before the current token is due to expire.
+#
+# Typically, the Swift storage driver fetches a new token upon the
+# expiration of the current token to ensure continued access to
+# Swift. However, some Swift transactions (like uploading image
+# segments) may not recover well if the token expires on the fly.
+#
+# Hence, by fetching a new token before the current token expiration,
+# we make sure that the token does not expire or is close to expiry
+# before a transaction is attempted. By default, the Swift storage
+# driver requests for a new token 60 seconds or less before the
+# current token expiration.
+#
+# Possible values:
+#     * Zero
+#     * Positive integer value
+#
+# Related Options:
+#     * None
+#
+#  (integer value)
+# Minimum value: 0
+#swift_store_expire_soon_interval = 60
+
+#
+# Use trusts for multi-tenant Swift store.
+#
+# This option instructs the Swift store to create a trust for each
+# add/get request when the multi-tenant store is in use. Using trusts
+# allows the Swift store to avoid problems that can be caused by an
+# authentication token expiring during the upload or download of data.
+#
+# By default, ``swift_store_use_trusts`` is set to ``True``(use of
+# trusts is enabled). If set to ``False``, a user token is used for
+# the Swift connection instead, eliminating the overhead of trust
+# creation.
+#
+# NOTE: This option is considered only when
+# ``swift_store_multi_tenant`` is set to ``True``
+#
+# Possible values:
+#     * True
+#     * False
+#
+# Related options:
+#     * swift_store_multi_tenant
+#
+#  (boolean value)
+#swift_store_use_trusts = true
+
+#
+# Buffer image segments before upload to Swift.
+#
+# Provide a boolean value to indicate whether or not Glance should
+# buffer image data to disk while uploading to swift. This enables
+# Glance to resume uploads on error.
+#
+# NOTES:
+# When enabling this option, one should take great care as this
+# increases disk usage on the API node. Be aware that depending
+# upon how the file system is configured, the disk space used
+# for buffering may decrease the actual disk space available for
+# the glance image cache.  Disk utilization will cap according to
+# the following equation:
+# (``swift_store_large_object_chunk_size`` * ``workers`` * 1000)
+#
+# Possible values:
+#     * True
+#     * False
+#
+# Related options:
+#     * swift_upload_buffer_dir
+#
+#  (boolean value)
+#swift_buffer_on_upload = false
+
+#
+# Reference to default Swift account/backing store parameters.
+#
+# Provide a string value representing a reference to the default set
+# of parameters required for using swift account/backing store for
+# image storage. The default reference value for this configuration
+# option is 'ref1'. This configuration option dereferences the
+# parameters and facilitates image storage in Swift storage backend
+# every time a new image is added.
+#
+# Possible values:
+#     * A valid string value
+#
+# Related options:
+#     * None
+#
+#  (string value)
+#default_swift_reference = ref1
+
+# DEPRECATED: Version of the authentication service to use. Valid versions are 2
+# and 3 for keystone and 1 (deprecated) for swauth and rackspace. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason:
+# The option 'auth_version' in the Swift back-end configuration file is
+# used instead.
+#swift_store_auth_version = 2
+
+# DEPRECATED: The address where the Swift authentication service is listening.
+# (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason:
+# The option 'auth_address' in the Swift back-end configuration file is
+# used instead.
+#swift_store_auth_address = <None>
+
+# DEPRECATED: The user to authenticate against the Swift authentication service.
+# (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason:
+# The option 'user' in the Swift back-end configuration file is set instead.
+#swift_store_user = <None>
+
+# DEPRECATED: Auth key for the user authenticating against the Swift
+# authentication service. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason:
+# The option 'key' in the Swift back-end configuration file is used
+# to set the authentication key instead.
+#swift_store_key = <None>
+
+#
+# Absolute path to the file containing the swift account(s)
+# configurations.
+#
+# Include a string value representing the path to a configuration
+# file that has references for each of the configured Swift
+# account(s)/backing stores. By default, no file path is specified
+# and customized Swift referencing is disabled. Configuring this
+# option is highly recommended while using Swift storage backend for
+# image storage as it avoids storage of credentials in the database.
+#
+# NOTE: Please do not configure this option if you have set
+# ``swift_store_multi_tenant`` to ``True``.
+#
+# Possible values:
+#     * String value representing an absolute path on the glance-api
+#       node
+#
+# Related options:
+#     * swift_store_multi_tenant
+#
+#  (string value)
+#swift_store_config_file = <None>
+
+#
+# Directory to buffer image segments before upload to Swift.
+#
+# Provide a string value representing the absolute path to the
+# directory on the glance node where image segments will be
+# buffered briefly before they are uploaded to swift.
+#
+# NOTES:
+# * This is required only when the configuration option
+#   ``swift_buffer_on_upload`` is set to True.
+# * This directory should be provisioned keeping in mind the
+#   ``swift_store_large_object_chunk_size`` and the maximum
+#   number of images that could be uploaded simultaneously by
+#   a given glance node.
+#
+# Possible values:
+#     * String value representing an absolute directory path
+#
+# Related options:
+#     * swift_buffer_on_upload
+#     * swift_store_large_object_chunk_size
+#
+#  (string value)
+#swift_upload_buffer_dir = <None>
+
+{%- if server.storage is defined and server.storage.get('vmware', {}).get('enabled') %}
+{%- set _data = server.storage.vmware %}
+{%- include "glance/files/" ~ server.version ~ "/stores/_vmware.conf" %}
+{%- endif %}
+
+
+[oslo_policy]
+{%- if server.oslo_policy is defined %}
+{%- set _data = server.oslo_policy %}
+{%- include "oslo_templates/files/" ~ server.version ~ "/oslo/_policy.conf" %}
+{%- endif %}
diff --git a/glance/files/rocky/glance-cache.conf.RedHat b/glance/files/rocky/glance-cache.conf.RedHat
new file mode 120000
index 0000000..ac4c3d1
--- /dev/null
+++ b/glance/files/rocky/glance-cache.conf.RedHat
@@ -0,0 +1 @@
+glance-cache.conf.Debian
\ No newline at end of file
diff --git a/glance/files/rocky/glance-registry-paste.ini b/glance/files/rocky/glance-registry-paste.ini
new file mode 100644
index 0000000..492dbc6
--- /dev/null
+++ b/glance/files/rocky/glance-registry-paste.ini
@@ -0,0 +1,35 @@
+# Use this pipeline for no auth - DEFAULT
+[pipeline:glance-registry]
+pipeline = healthcheck osprofiler unauthenticated-context registryapp
+
+# Use this pipeline for keystone auth
+[pipeline:glance-registry-keystone]
+pipeline = healthcheck osprofiler authtoken context registryapp
+
+# Use this pipeline for authZ only. This means that the registry will treat a
+# user as authenticated without making requests to keystone to reauthenticate
+# the user.
+[pipeline:glance-registry-trusted-auth]
+pipeline = healthcheck osprofiler context registryapp
+
+[app:registryapp]
+paste.app_factory = glance.registry.api:API.factory
+
+[filter:healthcheck]
+paste.filter_factory = oslo_middleware:Healthcheck.factory
+backends = disable_by_file
+disable_by_file_path = /etc/glance/healthcheck_disable
+
+[filter:context]
+paste.filter_factory = glance.api.middleware.context:ContextMiddleware.factory
+
+[filter:unauthenticated-context]
+paste.filter_factory = glance.api.middleware.context:UnauthenticatedContextMiddleware.factory
+
+[filter:authtoken]
+paste.filter_factory = keystonemiddleware.auth_token:filter_factory
+
+[filter:osprofiler]
+paste.filter_factory = osprofiler.web:WsgiMiddleware.factory
+hmac_keys = SECRET_KEY  #DEPRECATED
+enabled = yes  #DEPRECATED
diff --git a/glance/files/rocky/glance-registry.conf.Debian b/glance/files/rocky/glance-registry.conf.Debian
new file mode 100644
index 0000000..d35d0a9
--- /dev/null
+++ b/glance/files/rocky/glance-registry.conf.Debian
@@ -0,0 +1,1686 @@
+{%- from "glance/map.jinja" import server with context %}
+[DEFAULT]
+
+#
+# From glance.registry
+#
+
+# DEPRECATED:
+# Set the image owner to tenant or the authenticated user.
+#
+# Assign a boolean value to determine the owner of an image. When set to
+# True, the owner of the image is the tenant. When set to False, the
+# owner of the image will be the authenticated user issuing the request.
+# Setting it to False makes the image private to the associated user and
+# sharing with other users within the same tenant (or "project")
+# requires explicit image sharing via image membership.
+#
+# Possible values:
+#     * True
+#     * False
+#
+# Related options:
+#     * None
+#
+#  (boolean value)
+# This option is deprecated for removal since Rocky.
+# Its value may be silently ignored in the future.
+# Reason:
+# The non-default setting for this option misaligns Glance with other
+# OpenStack services with respect to resource ownership.  Further, surveys
+# indicate that this option is not used by operators.  The option will be
+# removed early in the 'S' development cycle following the standard OpenStack
+# deprecation policy.  As the option is not in wide use, no migration path is
+# proposed.
+#owner_is_tenant = true
+
+#
+# Role used to identify an authenticated user as administrator.
+#
+# Provide a string value representing a Keystone role to identify an
+# administrative user. Users with this role will be granted
+# administrative privileges. The default value for this option is
+# 'admin'.
+#
+# Possible values:
+#     * A string value which is a valid Keystone role
+#
+# Related options:
+#     * None
+#
+#  (string value)
+#admin_role = admin
+
+#
+# Allow limited access to unauthenticated users.
+#
+# Assign a boolean to determine API access for unathenticated
+# users. When set to False, the API cannot be accessed by
+# unauthenticated users. When set to True, unauthenticated users can
+# access the API with read-only privileges. This however only applies
+# when using ContextMiddleware.
+#
+# Possible values:
+#     * True
+#     * False
+#
+# Related options:
+#     * None
+#
+#  (boolean value)
+#allow_anonymous_access = false
+
+#
+# Limit the request ID length.
+#
+# Provide  an integer value to limit the length of the request ID to
+# the specified length. The default value is 64. Users can change this
+# to any ineteger value between 0 and 16384 however keeping in mind that
+# a larger value may flood the logs.
+#
+# Possible values:
+#     * Integer value between 0 and 16384
+#
+# Related options:
+#     * None
+#
+#  (integer value)
+# Minimum value: 0
+#max_request_id_length = 64
+
+#
+# Allow users to add additional/custom properties to images.
+#
+# Glance defines a standard set of properties (in its schema) that
+# appear on every image. These properties are also known as
+# ``base properties``. In addition to these properties, Glance
+# allows users to add custom properties to images. These are known
+# as ``additional properties``.
+#
+# By default, this configuration option is set to ``True`` and users
+# are allowed to add additional properties. The number of additional
+# properties that can be added to an image can be controlled via
+# ``image_property_quota`` configuration option.
+#
+# Possible values:
+#     * True
+#     * False
+#
+# Related options:
+#     * image_property_quota
+#
+#  (boolean value)
+#allow_additional_image_properties = true
+
+# "
+# Secure hashing algorithm used for computing the 'os_hash_value' property.
+#
+# This option configures the Glance "multihash", which consists of two
+# image properties: the 'os_hash_algo' and the 'os_hash_value'.  The
+# 'os_hash_algo' will be populated by the value of this configuration
+# option, and the 'os_hash_value' will be populated by the hexdigest computed
+# when the algorithm is applied to the uploaded or imported image data.
+#
+# The value must be a valid secure hash algorithm name recognized by the
+# python 'hashlib' library.  You can determine what these are by examining
+# the 'hashlib.algorithms_available' data member of the version of the
+# library being used in your Glance installation.  For interoperability
+# purposes, however, we recommend that you use the set of secure hash
+# names supplied by the 'hashlib.algorithms_guaranteed' data member because
+# those algorithms are guaranteed to be supported by the 'hashlib' library
+# on all platforms.  Thus, any image consumer using 'hashlib' locally should
+# be able to verify the 'os_hash_value' of the image.
+#
+# The default value of 'sha512' is a performant secure hash algorithm.
+#
+# If this option is misconfigured, any attempts to store image data will fail.
+# For that reason, we recommend using the default value.
+#
+# Possible values:
+#     * Any secure hash algorithm name recognized by the Python 'hashlib'
+#       library
+#
+# Related options:
+#     * None
+#
+#  (string value)
+#hashing_algorithm = sha512
+
+#
+# Maximum number of image members per image.
+#
+# This limits the maximum of users an image can be shared with. Any negative
+# value is interpreted as unlimited.
+#
+# Related options:
+#     * None
+#
+#  (integer value)
+#image_member_quota = 128
+
+#
+# Maximum number of properties allowed on an image.
+#
+# This enforces an upper limit on the number of additional properties an image
+# can have. Any negative value is interpreted as unlimited.
+#
+# NOTE: This won't have any impact if additional properties are disabled. Please
+# refer to ``allow_additional_image_properties``.
+#
+# Related options:
+#     * ``allow_additional_image_properties``
+#
+#  (integer value)
+#image_property_quota = 128
+
+#
+# Maximum number of tags allowed on an image.
+#
+# Any negative value is interpreted as unlimited.
+#
+# Related options:
+#     * None
+#
+#  (integer value)
+#image_tag_quota = 128
+
+#
+# Maximum number of locations allowed on an image.
+#
+# Any negative value is interpreted as unlimited.
+#
+# Related options:
+#     * None
+#
+#  (integer value)
+#image_location_quota = 10
+
+# DEPRECATED:
+# Python module path of data access API.
+#
+# Specifies the path to the API to use for accessing the data model.
+# This option determines how the image catalog data will be accessed.
+#
+# Possible values:
+#     * glance.db.sqlalchemy.api
+#     * glance.db.registry.api
+#     * glance.db.simple.api
+#
+# If this option is set to ``glance.db.sqlalchemy.api`` then the image
+# catalog data is stored in and read from the database via the
+# SQLAlchemy Core and ORM APIs.
+#
+# Setting this option to ``glance.db.registry.api`` will force all
+# database access requests to be routed through the Registry service.
+# This avoids data access from the Glance API nodes for an added layer
+# of security, scalability and manageability.
+#
+# NOTE: In v2 OpenStack Images API, the registry service is optional.
+# In order to use the Registry API in v2, the option
+# ``enable_v2_registry`` must be set to ``True``.
+#
+# Finally, when this configuration option is set to
+# ``glance.db.simple.api``, image catalog data is stored in and read
+# from an in-memory data structure. This is primarily used for testing.
+#
+# Related options:
+#     * enable_v2_api
+#     * enable_v2_registry
+#
+#  (string value)
+# This option is deprecated for removal since Queens.
+# Its value may be silently ignored in the future.
+# Reason:
+# Glance registry service is deprecated for removal.
+#
+# More information can be found from the spec:
+# http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance
+# /deprecate-registry.html
+#data_api = glance.db.sqlalchemy.api
+
+#
+# The default number of results to return for a request.
+#
+# Responses to certain API requests, like list images, may return
+# multiple items. The number of results returned can be explicitly
+# controlled by specifying the ``limit`` parameter in the API request.
+# However, if a ``limit`` parameter is not specified, this
+# configuration value will be used as the default number of results to
+# be returned for any API request.
+#
+# NOTES:
+#     * The value of this configuration option may not be greater than
+#       the value specified by ``api_limit_max``.
+#     * Setting this to a very large value may slow down database
+#       queries and increase response times. Setting this to a
+#       very low value may result in poor user experience.
+#
+# Possible values:
+#     * Any positive integer
+#
+# Related options:
+#     * api_limit_max
+#
+#  (integer value)
+# Minimum value: 1
+#limit_param_default = 25
+{%- if server.limit_param_default is defined %}
+limit_param_default = {{ server.limit_param_default }}
+{%- endif %}
+
+#
+# Maximum number of results that could be returned by a request.
+#
+# As described in the help text of ``limit_param_default``, some
+# requests may return multiple results. The number of results to be
+# returned are governed either by the ``limit`` parameter in the
+# request or the ``limit_param_default`` configuration option.
+# The value in either case, can't be greater than the absolute maximum
+# defined by this configuration option. Anything greater than this
+# value is trimmed down to the maximum value defined here.
+#
+# NOTE: Setting this to a very large value may slow down database
+#       queries and increase response times. Setting this to a
+#       very low value may result in poor user experience.
+#
+# Possible values:
+#     * Any positive integer
+#
+# Related options:
+#     * limit_param_default
+#
+#  (integer value)
+# Minimum value: 1
+#api_limit_max = 1000
+{%- if server.api_limit_max is defined %}
+api_limit_max = {{ server.api_limit_max }}
+{%- endif %}
+
+#
+# Show direct image location when returning an image.
+#
+# This configuration option indicates whether to show the direct image
+# location when returning image details to the user. The direct image
+# location is where the image data is stored in backend storage. This
+# image location is shown under the image property ``direct_url``.
+#
+# When multiple image locations exist for an image, the best location
+# is displayed based on the location strategy indicated by the
+# configuration option ``location_strategy``.
+#
+# NOTES:
+#     * Revealing image locations can present a GRAVE SECURITY RISK as
+#       image locations can sometimes include credentials. Hence, this
+#       is set to ``False`` by default. Set this to ``True`` with
+#       EXTREME CAUTION and ONLY IF you know what you are doing!
+#     * If an operator wishes to avoid showing any image location(s)
+#       to the user, then both this option and
+#       ``show_multiple_locations`` MUST be set to ``False``.
+#
+# Possible values:
+#     * True
+#     * False
+#
+# Related options:
+#     * show_multiple_locations
+#     * location_strategy
+#
+#  (boolean value)
+#show_image_direct_url = false
+
+# DEPRECATED:
+# Show all image locations when returning an image.
+#
+# This configuration option indicates whether to show all the image
+# locations when returning image details to the user. When multiple
+# image locations exist for an image, the locations are ordered based
+# on the location strategy indicated by the configuration opt
+# ``location_strategy``. The image locations are shown under the
+# image property ``locations``.
+#
+# NOTES:
+#     * Revealing image locations can present a GRAVE SECURITY RISK as
+#       image locations can sometimes include credentials. Hence, this
+#       is set to ``False`` by default. Set this to ``True`` with
+#       EXTREME CAUTION and ONLY IF you know what you are doing!
+#     * If an operator wishes to avoid showing any image location(s)
+#       to the user, then both this option and
+#       ``show_image_direct_url`` MUST be set to ``False``.
+#
+# Possible values:
+#     * True
+#     * False
+#
+# Related options:
+#     * show_image_direct_url
+#     * location_strategy
+#
+#  (boolean value)
+# This option is deprecated for removal since Newton.
+# Its value may be silently ignored in the future.
+# Reason: This option will be removed in the Pike release or later because the
+# same functionality can be achieved with greater granularity by using policies.
+# Please see the Newton release notes for more information.
+#show_multiple_locations = false
+
+#
+# Maximum size of image a user can upload in bytes.
+#
+# An image upload greater than the size mentioned here would result
+# in an image creation failure. This configuration option defaults to
+# 1099511627776 bytes (1 TiB).
+#
+# NOTES:
+#     * This value should only be increased after careful
+#       consideration and must be set less than or equal to
+#       8 EiB (9223372036854775808).
+#     * This value must be set with careful consideration of the
+#       backend storage capacity. Setting this to a very low value
+#       may result in a large number of image failures. And, setting
+#       this to a very large value may result in faster consumption
+#       of storage. Hence, this must be set according to the nature of
+#       images created and storage capacity available.
+#
+# Possible values:
+#     * Any positive number less than or equal to 9223372036854775808
+#
+#  (integer value)
+# Minimum value: 1
+# Maximum value: 9223372036854775808
+#image_size_cap = 1099511627776
+
+#
+# Maximum amount of image storage per tenant.
+#
+# This enforces an upper limit on the cumulative storage consumed by all images
+# of a tenant across all stores. This is a per-tenant limit.
+#
+# The default unit for this configuration option is Bytes. However, storage
+# units can be specified using case-sensitive literals ``B``, ``KB``, ``MB``,
+# ``GB`` and ``TB`` representing Bytes, KiloBytes, MegaBytes, GigaBytes and
+# TeraBytes respectively. Note that there should not be any space between the
+# value and unit. Value ``0`` signifies no quota enforcement. Negative values
+# are invalid and result in errors.
+#
+# Possible values:
+#     * A string that is a valid concatenation of a non-negative integer
+#       representing the storage value and an optional string literal
+#       representing storage units as mentioned above.
+#
+# Related options:
+#     * None
+#
+#  (string value)
+#user_storage_quota = 0
+
+#
+# Deploy the v2 OpenStack Images API.
+#
+# When this option is set to ``True``, Glance service will respond
+# to requests on registered endpoints conforming to the v2 OpenStack
+# Images API.
+#
+# NOTES:
+#     * If this option is disabled, then the ``enable_v2_registry``
+#       option, which is enabled by default, is also recommended
+#       to be disabled.
+#
+# Possible values:
+#     * True
+#     * False
+#
+# Related options:
+#     * enable_v2_registry
+#
+#  (boolean value)
+#enable_v2_api = true
+
+#
+#                     DEPRECATED FOR REMOVAL
+#  (boolean value)
+#enable_v1_registry = true
+
+# DEPRECATED:
+# Deploy the v2 API Registry service.
+#
+# When this option is set to ``True``, the Registry service
+# will be enabled in Glance for v2 API requests.
+#
+# NOTES:
+#     * Use of Registry is optional in v2 API, so this option
+#       must only be enabled if both ``enable_v2_api`` is set to
+#       ``True`` and the ``data_api`` option is set to
+#       ``glance.db.registry.api``.
+#
+#     * If deploying only the v1 OpenStack Images API, this option,
+#       which is enabled by default, should be disabled.
+#
+# Possible values:
+#     * True
+#     * False
+#
+# Related options:
+#     * enable_v2_api
+#     * data_api
+#
+#  (boolean value)
+# This option is deprecated for removal since Queens.
+# Its value may be silently ignored in the future.
+# Reason:
+# Glance registry service is deprecated for removal.
+#
+# More information can be found from the spec:
+# http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance
+# /deprecate-registry.html
+#enable_v2_registry = true
+
+#
+# Host address of the pydev server.
+#
+# Provide a string value representing the hostname or IP of the
+# pydev server to use for debugging. The pydev server listens for
+# debug connections on this address, facilitating remote debugging
+# in Glance.
+#
+# Possible values:
+#     * Valid hostname
+#     * Valid IP address
+#
+# Related options:
+#     * None
+#
+#  (host address value)
+#pydev_worker_debug_host = localhost
+
+#
+# Port number that the pydev server will listen on.
+#
+# Provide a port number to bind the pydev server to. The pydev
+# process accepts debug connections on this port and facilitates
+# remote debugging in Glance.
+#
+# Possible values:
+#     * A valid port number
+#
+# Related options:
+#     * None
+#
+#  (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#pydev_worker_debug_port = 5678
+
+#
+# AES key for encrypting store location metadata.
+#
+# Provide a string value representing the AES cipher to use for
+# encrypting Glance store metadata.
+#
+# NOTE: The AES key to use must be set to a random string of length
+# 16, 24 or 32 bytes.
+#
+# Possible values:
+#     * String value representing a valid AES key
+#
+# Related options:
+#     * None
+#
+#  (string value)
+#metadata_encryption_key = <None>
+
+#
+# Digest algorithm to use for digital signature.
+#
+# Provide a string value representing the digest algorithm to
+# use for generating digital signatures. By default, ``sha256``
+# is used.
+#
+# To get a list of the available algorithms supported by the version
+# of OpenSSL on your platform, run the command:
+# ``openssl list-message-digest-algorithms``.
+# Examples are 'sha1', 'sha256', and 'sha512'.
+#
+# NOTE: ``digest_algorithm`` is not related to Glance's image signing
+# and verification. It is only used to sign the universally unique
+# identifier (UUID) as a part of the certificate file and key file
+# validation.
+#
+# Possible values:
+#     * An OpenSSL message digest algorithm identifier
+#
+# Relation options:
+#     * None
+#
+#  (string value)
+#digest_algorithm = sha256
+
+#
+# The URL provides location where the temporary data will be stored
+#
+# This option is for Glance internal use only. Glance will save the
+# image data uploaded by the user to 'staging' endpoint during the
+# image import process.
+#
+# This option does not change the 'staging' API endpoint by any means.
+#
+# NOTE: It is discouraged to use same path as [task]/work_dir
+#
+# NOTE: 'file://<absolute-directory-path>' is the only option
+# api_image_import flow will support for now.
+#
+# NOTE: The staging path must be on shared filesystem available to all
+# Glance API nodes.
+#
+# Possible values:
+#     * String starting with 'file://' followed by absolute FS path
+#
+# Related options:
+#     * [task]/work_dir
+#
+#  (string value)
+#node_staging_uri = file:///tmp/staging/
+
+#
+# List of enabled Image Import Methods
+#
+# Both 'glance-direct' and 'web-download' are enabled by default.
+#
+# Related options:
+#     * [DEFAULT]/node_staging_uri (list value)
+#enabled_import_methods = [glance-direct,web-download]
+
+#
+# IP address to bind the glance servers to.
+#
+# Provide an IP address to bind the glance server to. The default
+# value is ``0.0.0.0``.
+#
+# Edit this option to enable the server to listen on one particular
+# IP address on the network card. This facilitates selection of a
+# particular network interface for the server.
+#
+# Possible values:
+#     * A valid IPv4 address
+#     * A valid IPv6 address
+#
+# Related options:
+#     * None
+#
+#  (host address value)
+bind_host = {{ server.bind.address }}
+
+#
+# Port number on which the server will listen.
+#
+# Provide a valid port number to bind the server's socket to. This
+# port is then set to identify processes and forward network messages
+# that arrive at the server. The default bind_port value for the API
+# server is 9292 and for the registry server is 9191.
+#
+# Possible values:
+#     * A valid port number (0 to 65535)
+#
+# Related options:
+#     * None
+#
+#  (port value)
+# Minimum value: 0
+# Maximum value: 65535
+bind_port = {{ server.registry.port }}
+
+#
+# Set the number of incoming connection requests.
+#
+# Provide a positive integer value to limit the number of requests in
+# the backlog queue. The default queue size is 4096.
+#
+# An incoming connection to a TCP listener socket is queued before a
+# connection can be established with the server. Setting the backlog
+# for a TCP socket ensures a limited queue size for incoming traffic.
+#
+# Possible values:
+#     * Positive integer
+#
+# Related options:
+#     * None
+#
+#  (integer value)
+# Minimum value: 1
+#backlog = 4096
+
+#
+# Set the wait time before a connection recheck.
+#
+# Provide a positive integer value representing time in seconds which
+# is set as the idle wait time before a TCP keep alive packet can be
+# sent to the host. The default value is 600 seconds.
+#
+# Setting ``tcp_keepidle`` helps verify at regular intervals that a
+# connection is intact and prevents frequent TCP connection
+# reestablishment.
+#
+# Possible values:
+#     * Positive integer value representing time in seconds
+#
+# Related options:
+#     * None
+#
+#  (integer value)
+# Minimum value: 1
+#tcp_keepidle = 600
+
+#
+# Absolute path to the CA file.
+#
+# Provide a string value representing a valid absolute path to
+# the Certificate Authority file to use for client authentication.
+#
+# A CA file typically contains necessary trusted certificates to
+# use for the client authentication. This is essential to ensure
+# that a secure connection is established to the server via the
+# internet.
+#
+# Possible values:
+#     * Valid absolute path to the CA file
+#
+# Related options:
+#     * None
+#
+#  (string value)
+#ca_file = /etc/ssl/cafile
+
+#
+# Absolute path to the certificate file.
+#
+# Provide a string value representing a valid absolute path to the
+# certificate file which is required to start the API service
+# securely.
+#
+# A certificate file typically is a public key container and includes
+# the server's public key, server name, server information and the
+# signature which was a result of the verification process using the
+# CA certificate. This is required for a secure connection
+# establishment.
+#
+# Possible values:
+#     * Valid absolute path to the certificate file
+#
+# Related options:
+#     * None
+#
+#  (string value)
+#cert_file = /etc/ssl/certs
+
+#
+# Absolute path to a private key file.
+#
+# Provide a string value representing a valid absolute path to a
+# private key file which is required to establish the client-server
+# connection.
+#
+# Possible values:
+#     * Absolute path to the private key file
+#
+# Related options:
+#     * None
+#
+#  (string value)
+#key_file = /etc/ssl/key/key-file.pem
+
+# DEPRECATED: The HTTP header used to determine the scheme for the original
+# request, even if it was removed by an SSL terminating proxy. Typical value is
+# "HTTP_X_FORWARDED_PROTO". (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Use the http_proxy_to_wsgi middleware instead.
+#secure_proxy_ssl_header = <None>
+
+#
+# Number of Glance worker processes to start.
+#
+# Provide a non-negative integer value to set the number of child
+# process workers to service requests. By default, the number of CPUs
+# available is set as the value for ``workers`` limited to 8. For
+# example if the processor count is 6, 6 workers will be used, if the
+# processor count is 24 only 8 workers will be used. The limit will only
+# apply to the default value, if 24 workers is configured, 24 is used.
+#
+# Each worker process is made to listen on the port set in the
+# configuration file and contains a greenthread pool of size 1000.
+#
+# NOTE: Setting the number of workers to zero, triggers the creation
+# of a single API process with a greenthread pool of size 1000.
+#
+# Possible values:
+#     * 0
+#     * Positive integer value (typically equal to the number of CPUs)
+#
+# Related options:
+#     * None
+#
+#  (integer value)
+# Minimum value: 0
+workers = {{ server.workers }}
+
+#
+# Maximum line size of message headers.
+#
+# Provide an integer value representing a length to limit the size of
+# message headers. The default value is 16384.
+#
+# NOTE: ``max_header_line`` may need to be increased when using large
+# tokens (typically those generated by the Keystone v3 API with big
+# service catalogs). However, it is to be kept in mind that larger
+# values for ``max_header_line`` would flood the logs.
+#
+# Setting ``max_header_line`` to 0 sets no limit for the line size of
+# message headers.
+#
+# Possible values:
+#     * 0
+#     * Positive integer
+#
+# Related options:
+#     * None
+#
+#  (integer value)
+# Minimum value: 0
+#max_header_line = 16384
+
+#
+# Set keep alive option for HTTP over TCP.
+#
+# Provide a boolean value to determine sending of keep alive packets.
+# If set to ``False``, the server returns the header
+# "Connection: close". If set to ``True``, the server returns a
+# "Connection: Keep-Alive" in its responses. This enables retention of
+# the same TCP connection for HTTP conversations instead of opening a
+# new one with each new request.
+#
+# This option must be set to ``False`` if the client socket connection
+# needs to be closed explicitly after the response is received and
+# read successfully by the client.
+#
+# Possible values:
+#     * True
+#     * False
+#
+# Related options:
+#     * None
+#
+#  (boolean value)
+#http_keepalive = true
+
+#
+# Timeout for client connections' socket operations.
+#
+# Provide a valid integer value representing time in seconds to set
+# the period of wait before an incoming connection can be closed. The
+# default value is 900 seconds.
+#
+# The value zero implies wait forever.
+#
+# Possible values:
+#     * Zero
+#     * Positive integer
+#
+# Related options:
+#     * None
+#
+#  (integer value)
+# Minimum value: 0
+#client_socket_timeout = 900
+
+{%- if server.logging is defined %}
+{%- set _data = server.logging %}
+{%- do _data.update({'log_file': '/var/log/glance/registry.log'}) %}
+{%- include "oslo_templates/files/" ~ server.version ~ "/oslo/_log.conf" %}
+{%- endif %}
+
+
+[database]
+{%- set _data = server.database %}
+{%- if _data.ssl is defined and 'cacert_file' not in _data.get('ssl', {}).keys() %}{% do _data['ssl'].update({'cacert_file': server.cacert_file}) %}{% endif %}
+{%- include "oslo_templates/files/" ~ server.version ~ "/oslo/_database.conf" %}
+
+
+[keystone_authtoken]
+{%- set _data = server.identity %}
+{%- if 'cacert_file' not in _data.keys() %}{% do _data.update({'cacert_file': server.cacert_file}) %}{% endif %}
+{%- set auth_type = _data.get('auth_type', 'password') %}
+{%- if server.get('cache',{}).members is defined and 'cache' not in _data.keys() %}
+{% do _data.update({'cache': server.cache}) %}
+{%- endif %}
+{%- include "oslo_templates/files/" ~ server.version ~ "/keystonemiddleware/_auth_token.conf" %}
+{%- include "oslo_templates/files/" ~ server.version ~ "/keystoneauth/_type_" ~ auth_type ~ ".conf" %}
+
+
+[matchmaker_redis]
+
+#
+# From oslo.messaging
+#
+
+# DEPRECATED: Host to locate redis. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#host = 127.0.0.1
+
+# DEPRECATED: Use this port to connect to redis host. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#port = 6379
+
+# DEPRECATED: Password for Redis server (optional). (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#password =
+
+# DEPRECATED: List of Redis Sentinel hosts (fault tolerance mode), e.g.,
+# [host:port, host1:port ... ] (list value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#sentinel_hosts =
+
+# Redis replica set name. (string value)
+#sentinel_group_name = oslo-messaging-zeromq
+
+# Time in ms to wait between connection attempts. (integer value)
+#wait_timeout = 2000
+
+# Time in ms to wait before the transaction is killed. (integer value)
+#check_timeout = 20000
+
+# Timeout in ms on blocking socket operations. (integer value)
+#socket_timeout = 10000
+
+
+[oslo_messaging_amqp]
+
+#
+# From oslo.messaging
+#
+
+# Name for the AMQP container. must be globally unique. Defaults to a generated
+# UUID (string value)
+#container_name = <None>
+
+# Timeout for inactive connections (in seconds) (integer value)
+#idle_timeout = 0
+
+# Debug: dump AMQP frames to stdout (boolean value)
+#trace = false
+
+# Attempt to connect via SSL. If no other ssl-related parameters are given, it
+# will use the system's CA-bundle to verify the server's certificate. (boolean
+# value)
+#ssl = false
+
+# CA certificate PEM file used to verify the server's certificate (string value)
+#ssl_ca_file =
+
+# Self-identifying certificate PEM file for client authentication (string value)
+#ssl_cert_file =
+
+# Private key PEM file used to sign ssl_cert_file certificate (optional) (string
+# value)
+#ssl_key_file =
+
+# Password for decrypting ssl_key_file (if encrypted) (string value)
+#ssl_key_password = <None>
+
+# By default SSL checks that the name in the server's certificate matches the
+# hostname in the transport_url. In some configurations it may be preferable to
+# use the virtual hostname instead, for example if the server uses the Server
+# Name Indication TLS extension (rfc6066) to provide a certificate per virtual
+# host. Set ssl_verify_vhost to True if the server's SSL certificate uses the
+# virtual host name instead of the DNS name. (boolean value)
+#ssl_verify_vhost = false
+
+# DEPRECATED: Accept clients using either SSL or plain TCP (boolean value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Not applicable - not a SSL server
+#allow_insecure_clients = false
+
+# Space separated list of acceptable SASL mechanisms (string value)
+#sasl_mechanisms =
+
+# Path to directory that contains the SASL configuration (string value)
+#sasl_config_dir =
+
+# Name of configuration file (without .conf suffix) (string value)
+#sasl_config_name =
+
+# SASL realm to use if no realm present in username (string value)
+#sasl_default_realm =
+
+# DEPRECATED: User name for message broker authentication (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Should use configuration option transport_url to provide the username.
+#username =
+
+# DEPRECATED: Password for message broker authentication (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Should use configuration option transport_url to provide the password.
+#password =
+
+# Seconds to pause before attempting to re-connect. (integer value)
+# Minimum value: 1
+#connection_retry_interval = 1
+
+# Increase the connection_retry_interval by this many seconds after each
+# unsuccessful failover attempt. (integer value)
+# Minimum value: 0
+#connection_retry_backoff = 2
+
+# Maximum limit for connection_retry_interval + connection_retry_backoff
+# (integer value)
+# Minimum value: 1
+#connection_retry_interval_max = 30
+
+# Time to pause between re-connecting an AMQP 1.0 link that failed due to a
+# recoverable error. (integer value)
+# Minimum value: 1
+#link_retry_delay = 10
+
+# The maximum number of attempts to re-send a reply message which failed due to
+# a recoverable error. (integer value)
+# Minimum value: -1
+#default_reply_retry = 0
+
+# The deadline for an rpc reply message delivery. (integer value)
+# Minimum value: 5
+#default_reply_timeout = 30
+
+# The deadline for an rpc cast or call message delivery. Only used when caller
+# does not provide a timeout expiry. (integer value)
+# Minimum value: 5
+#default_send_timeout = 30
+
+# The deadline for a sent notification message delivery. Only used when caller
+# does not provide a timeout expiry. (integer value)
+# Minimum value: 5
+#default_notify_timeout = 30
+
+# The duration to schedule a purge of idle sender links. Detach link after
+# expiry. (integer value)
+# Minimum value: 1
+#default_sender_link_timeout = 600
+
+# Indicates the addressing mode used by the driver.
+# Permitted values:
+# 'legacy'   - use legacy non-routable addressing
+# 'routable' - use routable addresses
+# 'dynamic'  - use legacy addresses if the message bus does not support routing
+# otherwise use routable addressing (string value)
+#addressing_mode = dynamic
+
+# Enable virtual host support for those message buses that do not natively
+# support virtual hosting (such as qpidd). When set to true the virtual host
+# name will be added to all message bus addresses, effectively creating a
+# private 'subnet' per virtual host. Set to False if the message bus supports
+# virtual hosting using the 'hostname' field in the AMQP 1.0 Open performative
+# as the name of the virtual host. (boolean value)
+#pseudo_vhost = true
+
+# address prefix used when sending to a specific server (string value)
+#server_request_prefix = exclusive
+
+# address prefix used when broadcasting to all servers (string value)
+#broadcast_prefix = broadcast
+
+# address prefix when sending to any server in group (string value)
+#group_request_prefix = unicast
+
+# Address prefix for all generated RPC addresses (string value)
+#rpc_address_prefix = openstack.org/om/rpc
+
+# Address prefix for all generated Notification addresses (string value)
+#notify_address_prefix = openstack.org/om/notify
+
+# Appended to the address prefix when sending a fanout message. Used by the
+# message bus to identify fanout messages. (string value)
+#multicast_address = multicast
+
+# Appended to the address prefix when sending to a particular RPC/Notification
+# server. Used by the message bus to identify messages sent to a single
+# destination. (string value)
+#unicast_address = unicast
+
+# Appended to the address prefix when sending to a group of consumers. Used by
+# the message bus to identify messages that should be delivered in a round-robin
+# fashion across consumers. (string value)
+#anycast_address = anycast
+
+# Exchange name used in notification addresses.
+# Exchange name resolution precedence:
+# Target.exchange if set
+# else default_notification_exchange if set
+# else control_exchange if set
+# else 'notify' (string value)
+#default_notification_exchange = <None>
+
+# Exchange name used in RPC addresses.
+# Exchange name resolution precedence:
+# Target.exchange if set
+# else default_rpc_exchange if set
+# else control_exchange if set
+# else 'rpc' (string value)
+#default_rpc_exchange = <None>
+
+# Window size for incoming RPC Reply messages. (integer value)
+# Minimum value: 1
+#reply_link_credit = 200
+
+# Window size for incoming RPC Request messages (integer value)
+# Minimum value: 1
+#rpc_server_credit = 100
+
+# Window size for incoming Notification messages (integer value)
+# Minimum value: 1
+#notify_server_credit = 100
+
+# Send messages of this type pre-settled.
+# Pre-settled messages will not receive acknowledgement
+# from the peer. Note well: pre-settled messages may be
+# silently discarded if the delivery fails.
+# Permitted values:
+# 'rpc-call' - send RPC Calls pre-settled
+# 'rpc-reply'- send RPC Replies pre-settled
+# 'rpc-cast' - Send RPC Casts pre-settled
+# 'notify'   - Send Notifications pre-settled
+#  (multi valued)
+#pre_settled = rpc-cast
+#pre_settled = rpc-reply
+
+
+[oslo_messaging_kafka]
+
+#
+# From oslo.messaging
+#
+
+# DEPRECATED: Default Kafka broker Host (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#kafka_default_host = localhost
+
+# DEPRECATED: Default Kafka broker Port (port value)
+# Minimum value: 0
+# Maximum value: 65535
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#kafka_default_port = 9092
+
+# Max fetch bytes of Kafka consumer (integer value)
+#kafka_max_fetch_bytes = 1048576
+
+# Default timeout(s) for Kafka consumers (floating point value)
+#kafka_consumer_timeout = 1.0
+
+# DEPRECATED: Pool Size for Kafka Consumers (integer value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Driver no longer uses connection pool.
+#pool_size = 10
+
+# DEPRECATED: The pool size limit for connections expiration policy (integer
+# value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Driver no longer uses connection pool.
+#conn_pool_min_size = 2
+
+# DEPRECATED: The time-to-live in sec of idle connections in the pool (integer
+# value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Driver no longer uses connection pool.
+#conn_pool_ttl = 1200
+
+# Group id for Kafka consumer. Consumers in one group will coordinate message
+# consumption (string value)
+#consumer_group = oslo_messaging_consumer
+
+# Upper bound on the delay for KafkaProducer batching in seconds (floating point
+# value)
+#producer_batch_timeout = 0.0
+
+# Size of batch for the producer async send (integer value)
+#producer_batch_size = 16384
+
+# Enable asynchronous consumer commits (boolean value)
+#enable_auto_commit = false
+
+# The maximum number of records returned in a poll call (integer value)
+#max_poll_records = 500
+
+# Protocol used to communicate with brokers (string value)
+# Possible values:
+# PLAINTEXT - <No description provided>
+# SASL_PLAINTEXT - <No description provided>
+# SSL - <No description provided>
+# SASL_SSL - <No description provided>
+#security_protocol = PLAINTEXT
+
+# Mechanism when security protocol is SASL (string value)
+#sasl_mechanism = PLAIN
+
+# CA certificate PEM file used to verify the server certificate (string value)
+#ssl_cafile =
+
+
+[oslo_messaging_notifications]
+
+#
+# From oslo.messaging
+#
+
+# The Drivers(s) to handle sending notifications. Possible values are messaging,
+# messagingv2, routing, log, test, noop (multi valued)
+# Deprecated group/name - [DEFAULT]/notification_driver
+#driver =
+
+# A URL representing the messaging driver to use for notifications. If not set,
+# we fall back to the same configuration used for RPC. (string value)
+# Deprecated group/name - [DEFAULT]/notification_transport_url
+#transport_url = <None>
+
+# AMQP topic used for OpenStack notifications. (list value)
+# Deprecated group/name - [rpc_notifier2]/topics
+# Deprecated group/name - [DEFAULT]/notification_topics
+#topics = notifications
+
+# The maximum number of attempts to re-send a notification message which failed
+# to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite
+# (integer value)
+#retry = -1
+
+
+[oslo_messaging_rabbit]
+
+#
+# From oslo.messaging
+#
+
+# Use durable queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/amqp_durable_queues
+# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
+#amqp_durable_queues = false
+
+# Auto-delete queues in AMQP. (boolean value)
+#amqp_auto_delete = false
+
+# Connect over SSL. (boolean value)
+# Deprecated group/name - [oslo_messaging_rabbit]/rabbit_use_ssl
+#ssl = false
+
+# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
+# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
+# distributions. (string value)
+# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_version
+#ssl_version =
+
+# SSL key file (valid only if SSL enabled). (string value)
+# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_keyfile
+#ssl_key_file =
+
+# SSL cert file (valid only if SSL enabled). (string value)
+# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_certfile
+#ssl_cert_file =
+
+# SSL certification authority file (valid only if SSL enabled). (string value)
+# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_ca_certs
+#ssl_ca_file =
+
+# How long to wait before reconnecting in response to an AMQP consumer cancel
+# notification. (floating point value)
+#kombu_reconnect_delay = 1.0
+
+# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not
+# be used. This option may not be available in future versions. (string value)
+#kombu_compression = <None>
+
+# How long to wait a missing client before abandoning to send it its replies.
+# This value should not be longer than rpc_response_timeout. (integer value)
+# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
+#kombu_missing_consumer_retry_timeout = 60
+
+# Determines how the next RabbitMQ node is chosen in case the one we are
+# currently connected to becomes unavailable. Takes effect only if more than one
+# RabbitMQ node is provided in config. (string value)
+# Possible values:
+# round-robin - <No description provided>
+# shuffle - <No description provided>
+#kombu_failover_strategy = round-robin
+
+# DEPRECATED: The RabbitMQ broker address where a single node is used. (string
+# value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_host = localhost
+
+# DEPRECATED: The RabbitMQ broker port where a single node is used. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_port = 5672
+
+# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_hosts = $rabbit_host:$rabbit_port
+
+# DEPRECATED: The RabbitMQ userid. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_userid = guest
+
+# DEPRECATED: The RabbitMQ password. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_password = guest
+
+# The RabbitMQ login method. (string value)
+# Possible values:
+# PLAIN - <No description provided>
+# AMQPLAIN - <No description provided>
+# RABBIT-CR-DEMO - <No description provided>
+#rabbit_login_method = AMQPLAIN
+
+# DEPRECATED: The RabbitMQ virtual host. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_virtual_host = /
+
+# How frequently to retry connecting with RabbitMQ. (integer value)
+#rabbit_retry_interval = 1
+
+# How long to backoff for between retries when connecting to RabbitMQ. (integer
+# value)
+#rabbit_retry_backoff = 2
+
+# Maximum interval of RabbitMQ connection retries. Default is 30 seconds.
+# (integer value)
+#rabbit_interval_max = 30
+
+# DEPRECATED: Maximum number of RabbitMQ connection retries. Default is 0
+# (infinite retry count). (integer value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#rabbit_max_retries = 0
+
+# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this
+# option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring
+# is no longer controlled by the x-ha-policy argument when declaring a queue. If
+# you just want to make sure that all queues (except those with auto-generated
+# names) are mirrored across all nodes, run: "rabbitmqctl set_policy HA
+# '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value)
+#rabbit_ha_queues = false
+
+# Positive integer representing duration in seconds for queue TTL (x-expires).
+# Queues which are unused for the duration of the TTL are automatically deleted.
+# The parameter affects only reply and fanout queues. (integer value)
+# Minimum value: 1
+#rabbit_transient_queues_ttl = 1800
+
+# Specifies the number of messages to prefetch. Setting to zero allows unlimited
+# messages. (integer value)
+#rabbit_qos_prefetch_count = 0
+
+# Number of seconds after which the Rabbit broker is considered down if
+# heartbeat's keep-alive fails (0 disable the heartbeat). EXPERIMENTAL (integer
+# value)
+#heartbeat_timeout_threshold = 60
+
+# How often times during the heartbeat_timeout_threshold we check the heartbeat.
+# (integer value)
+#heartbeat_rate = 2
+
+
+[oslo_messaging_zmq]
+
+#
+# From oslo.messaging
+#
+
+# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
+# The "host" option should point or resolve to this address. (string value)
+#rpc_zmq_bind_address = *
+
+# MatchMaker driver. (string value)
+# Possible values:
+# redis - <No description provided>
+# sentinel - <No description provided>
+# dummy - <No description provided>
+#rpc_zmq_matchmaker = redis
+
+# Number of ZeroMQ contexts, defaults to 1. (integer value)
+#rpc_zmq_contexts = 1
+
+# Maximum number of ingress messages to locally buffer per topic. Default is
+# unlimited. (integer value)
+#rpc_zmq_topic_backlog = <None>
+
+# Directory for holding IPC sockets. (string value)
+#rpc_zmq_ipc_dir = /var/run/openstack
+
+# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
+# "host" option, if running Nova. (string value)
+#rpc_zmq_host = localhost
+
+# Number of seconds to wait before all pending messages will be sent after
+# closing a socket. The default value of -1 specifies an infinite linger period.
+# The value of 0 specifies no linger period. Pending messages shall be discarded
+# immediately when the socket is closed. Positive values specify an upper bound
+# for the linger period. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
+#zmq_linger = -1
+
+# The default number of seconds that poll should wait. Poll raises timeout
+# exception when timeout expired. (integer value)
+#rpc_poll_timeout = 1
+
+# Expiration timeout in seconds of a name service record about existing target (
+# < 0 means no timeout). (integer value)
+#zmq_target_expire = 300
+
+# Update period in seconds of a name service record about existing target.
+# (integer value)
+#zmq_target_update = 180
+
+# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
+# value)
+#use_pub_sub = false
+
+# Use ROUTER remote proxy. (boolean value)
+#use_router_proxy = false
+
+# This option makes direct connections dynamic or static. It makes sense only
+# with use_router_proxy=False which means to use direct connections for direct
+# message types (ignored otherwise). (boolean value)
+#use_dynamic_connections = false
+
+# How many additional connections to a host will be made for failover reasons.
+# This option is actual only in dynamic connections mode. (integer value)
+#zmq_failover_connections = 2
+
+# Minimal port number for random ports range. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#rpc_zmq_min_port = 49153
+
+# Maximal port number for random ports range. (integer value)
+# Minimum value: 1
+# Maximum value: 65536
+#rpc_zmq_max_port = 65536
+
+# Number of retries to find free port number before fail with ZMQBindError.
+# (integer value)
+#rpc_zmq_bind_port_retries = 100
+
+# Default serialization mechanism for serializing/deserializing
+# outgoing/incoming messages (string value)
+# Possible values:
+# json - <No description provided>
+# msgpack - <No description provided>
+#rpc_zmq_serialization = json
+
+# This option configures round-robin mode in zmq socket. True means not keeping
+# a queue when server side disconnects. False means to keep queue and messages
+# even if server is disconnected, when the server appears we send all
+# accumulated messages to it. (boolean value)
+#zmq_immediate = true
+
+# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
+# other negative value) means to skip any overrides and leave it to OS default;
+# 0 and 1 (or any other positive value) mean to disable and enable the option
+# respectively. (integer value)
+#zmq_tcp_keepalive = -1
+
+# The duration between two keepalive transmissions in idle condition. The unit
+# is platform dependent, for example, seconds in Linux, milliseconds in Windows
+# etc. The default value of -1 (or any other negative value and 0) means to skip
+# any overrides and leave it to OS default. (integer value)
+#zmq_tcp_keepalive_idle = -1
+
+# The number of retransmissions to be carried out before declaring that remote
+# end is not available. The default value of -1 (or any other negative value and
+# 0) means to skip any overrides and leave it to OS default. (integer value)
+#zmq_tcp_keepalive_cnt = -1
+
+# The duration between two successive keepalive retransmissions, if
+# acknowledgement to the previous keepalive transmission is not received. The
+# unit is platform dependent, for example, seconds in Linux, milliseconds in
+# Windows etc. The default value of -1 (or any other negative value and 0) means
+# to skip any overrides and leave it to OS default. (integer value)
+#zmq_tcp_keepalive_intvl = -1
+
+# Maximum number of (green) threads to work concurrently. (integer value)
+#rpc_thread_pool_size = 100
+
+# Expiration timeout in seconds of a sent/received message after which it is not
+# tracked anymore by a client/server. (integer value)
+#rpc_message_ttl = 300
+
+# Wait for message acknowledgements from receivers. This mechanism works only
+# via proxy without PUB/SUB. (boolean value)
+#rpc_use_acks = false
+
+# Number of seconds to wait for an ack from a cast/call. After each retry
+# attempt this timeout is multiplied by some specified multiplier. (integer
+# value)
+#rpc_ack_timeout_base = 15
+
+# Number to multiply base ack timeout by after each retry attempt. (integer
+# value)
+#rpc_ack_timeout_multiplier = 2
+
+# Default number of message sending attempts in case of any problems occurred:
+# positive value N means at most N retries, 0 means no retries, None or -1 (or
+# any other negative values) mean to retry forever. This option is used only if
+# acknowledgments are enabled. (integer value)
+#rpc_retry_attempts = 3
+
+# List of publisher hosts SubConsumer can subscribe on. This option has higher
+# priority then the default publishers list taken from the matchmaker. (list
+# value)
+#subscribe_on =
+
+
+[oslo_policy]
+{%- if server.oslo_policy is defined %}
+{%- set _data = server.oslo_policy %}
+{%- include "oslo_templates/files/" ~ server.version ~ "/oslo/_policy.conf" %}
+{%- endif %}
+
+
+[paste_deploy]
+
+#
+# From glance.registry
+#
+
+#
+# Deployment flavor to use in the server application pipeline.
+#
+# Provide a string value representing the appropriate deployment
+# flavor used in the server application pipleline. This is typically
+# the partial name of a pipeline in the paste configuration file with
+# the service name removed.
+#
+# For example, if your paste section name in the paste configuration
+# file is [pipeline:glance-api-keystone], set ``flavor`` to
+# ``keystone``.
+#
+# Possible values:
+#     * String value representing a partial pipeline name.
+#
+# Related Options:
+#     * config_file
+#
+#  (string value)
+flavor = {{ server.get('flavor', 'keystone') }}
+
+#
+# Name of the paste configuration file.
+#
+# Provide a string value representing the name of the paste
+# configuration file to use for configuring piplelines for
+# server application deployments.
+#
+# NOTES:
+#     * Provide the name or the path relative to the glance directory
+#       for the paste configuration file and not the absolute path.
+#     * The sample paste configuration file shipped with Glance need
+#       not be edited in most cases as it comes with ready-made
+#       pipelines for all common deployment flavors.
+#
+# If no value is specified for this option, the ``paste.ini`` file
+# with the prefix of the corresponding Glance service's configuration
+# file name will be searched for in the known configuration
+# directories. (For example, if this option is missing from or has no
+# value set in ``glance-api.conf``, the service will look for a file
+# named ``glance-api-paste.ini``.) If the paste configuration file is
+# not found, the service will not start.
+#
+# Possible values:
+#     * A string value representing the name of the paste configuration
+#       file.
+#
+# Related Options:
+#     * flavor
+#
+#  (string value)
+#config_file = glance-api-paste.ini
+
+
+[profiler]
+
+#
+# From glance.registry
+#
+
+#
+# Enable the profiling for all services on this node.
+#
+# Default value is False (fully disable the profiling feature).
+#
+# Possible values:
+#
+# * True: Enables the feature
+# * False: Disables the feature. The profiling cannot be started via this
+# project
+#   operations. If the profiling is triggered by another project, this project
+#   part will be empty.
+#  (boolean value)
+# Deprecated group/name - [profiler]/profiler_enabled
+#enabled = false
+
+#
+# Enable SQL requests profiling in services.
+#
+# Default value is False (SQL requests won't be traced).
+#
+# Possible values:
+#
+# * True: Enables SQL requests profiling. Each SQL query will be part of the
+#   trace and can the be analyzed by how much time was spent for that.
+# * False: Disables SQL requests profiling. The spent time is only shown on a
+#   higher level of operations. Single SQL queries cannot be analyzed this way.
+#  (boolean value)
+#trace_sqlalchemy = false
+
+#
+# Secret key(s) to use for encrypting context data for performance profiling.
+#
+# This string value should have the following format: <key1>[,<key2>,...<keyn>],
+# where each key is some random string. A user who triggers the profiling via
+# the REST API has to set one of these keys in the headers of the REST API call
+# to include profiling results of this node for this particular project.
+#
+# Both "enabled" flag and "hmac_keys" config options should be set to enable
+# profiling. Also, to generate correct profiling information across all services
+# at least one key needs to be consistent between OpenStack projects. This
+# ensures it can be used from client side to generate the trace, containing
+# information from all possible resources.
+#  (string value)
+#hmac_keys = SECRET_KEY
+
+#
+# Connection string for a notifier backend.
+#
+# Default value is ``messaging://`` which sets the notifier to oslo_messaging.
+#
+# Examples of possible values:
+#
+# * ``messaging://`` - use oslo_messaging driver for sending spans.
+# * ``redis://127.0.0.1:6379`` - use redis driver for sending spans.
+# * ``mongodb://127.0.0.1:27017`` - use mongodb driver for sending spans.
+# * ``elasticsearch://127.0.0.1:9200`` - use elasticsearch driver for sending
+#   spans.
+# * ``jaeger://127.0.0.1:6831`` - use jaeger tracing as driver for sending
+# spans.
+#  (string value)
+#connection_string = messaging://
+
+#
+# Document type for notification indexing in elasticsearch.
+#  (string value)
+#es_doc_type = notification
+
+#
+# This parameter is a time value parameter (for example: es_scroll_time=2m),
+# indicating for how long the nodes that participate in the search will maintain
+# relevant resources in order to continue and support it.
+#  (string value)
+#es_scroll_time = 2m
+
+#
+# Elasticsearch splits large requests in batches. This parameter defines
+# maximum size of each batch (for example: es_scroll_size=10000).
+#  (integer value)
+#es_scroll_size = 10000
+
+#
+# Redissentinel provides a timeout option on the connections.
+# This parameter defines that timeout (for example: socket_timeout=0.1).
+#  (floating point value)
+#socket_timeout = 0.1
+
+#
+# Redissentinel uses a service name to identify a master redis service.
+# This parameter defines the name (for example:
+# ``sentinal_service_name=mymaster``).
+#  (string value)
+#sentinel_service_name = mymaster
+
+#
+# Enable filter traces that contain error/exception to a separated place.
+#
+# Default value is set to False.
+#
+# Possible values:
+#
+# * True: Enable filter traces that contain error/exception.
+# * False: Disable the filter.
+#  (boolean value)
+#filter_error_trace = false
diff --git a/glance/files/rocky/glance-registry.conf.RedHat b/glance/files/rocky/glance-registry.conf.RedHat
new file mode 120000
index 0000000..a4170b8
--- /dev/null
+++ b/glance/files/rocky/glance-registry.conf.RedHat
@@ -0,0 +1 @@
+glance-registry.conf.Debian
\ No newline at end of file
diff --git a/glance/files/rocky/glance-scrubber.conf.Debian b/glance/files/rocky/glance-scrubber.conf.Debian
new file mode 100644
index 0000000..31af79d
--- /dev/null
+++ b/glance/files/rocky/glance-scrubber.conf.Debian
@@ -0,0 +1,2115 @@
+{%- from "glance/map.jinja" import server with context %}
+[DEFAULT]
+
+#
+# From glance.scrubber
+#
+
+#
+# Allow users to add additional/custom properties to images.
+#
+# Glance defines a standard set of properties (in its schema) that
+# appear on every image. These properties are also known as
+# ``base properties``. In addition to these properties, Glance
+# allows users to add custom properties to images. These are known
+# as ``additional properties``.
+#
+# By default, this configuration option is set to ``True`` and users
+# are allowed to add additional properties. The number of additional
+# properties that can be added to an image can be controlled via
+# ``image_property_quota`` configuration option.
+#
+# Possible values:
+#     * True
+#     * False
+#
+# Related options:
+#     * image_property_quota
+#
+#  (boolean value)
+#allow_additional_image_properties = true
+
+# "
+# Secure hashing algorithm used for computing the 'os_hash_value' property.
+#
+# This option configures the Glance "multihash", which consists of two
+# image properties: the 'os_hash_algo' and the 'os_hash_value'.  The
+# 'os_hash_algo' will be populated by the value of this configuration
+# option, and the 'os_hash_value' will be populated by the hexdigest computed
+# when the algorithm is applied to the uploaded or imported image data.
+#
+# The value must be a valid secure hash algorithm name recognized by the
+# python 'hashlib' library.  You can determine what these are by examining
+# the 'hashlib.algorithms_available' data member of the version of the
+# library being used in your Glance installation.  For interoperability
+# purposes, however, we recommend that you use the set of secure hash
+# names supplied by the 'hashlib.algorithms_guaranteed' data member because
+# those algorithms are guaranteed to be supported by the 'hashlib' library
+# on all platforms.  Thus, any image consumer using 'hashlib' locally should
+# be able to verify the 'os_hash_value' of the image.
+#
+# The default value of 'sha512' is a performant secure hash algorithm.
+#
+# If this option is misconfigured, any attempts to store image data will fail.
+# For that reason, we recommend using the default value.
+#
+# Possible values:
+#     * Any secure hash algorithm name recognized by the Python 'hashlib'
+#       library
+#
+# Related options:
+#     * None
+#
+#  (string value)
+#hashing_algorithm = sha512
+
+#
+# Maximum number of image members per image.
+#
+# This limits the maximum of users an image can be shared with. Any negative
+# value is interpreted as unlimited.
+#
+# Related options:
+#     * None
+#
+#  (integer value)
+#image_member_quota = 128
+
+#
+# Maximum number of properties allowed on an image.
+#
+# This enforces an upper limit on the number of additional properties an image
+# can have. Any negative value is interpreted as unlimited.
+#
+# NOTE: This won't have any impact if additional properties are disabled. Please
+# refer to ``allow_additional_image_properties``.
+#
+# Related options:
+#     * ``allow_additional_image_properties``
+#
+#  (integer value)
+#image_property_quota = 128
+
+#
+# Maximum number of tags allowed on an image.
+#
+# Any negative value is interpreted as unlimited.
+#
+# Related options:
+#     * None
+#
+#  (integer value)
+#image_tag_quota = 128
+
+#
+# Maximum number of locations allowed on an image.
+#
+# Any negative value is interpreted as unlimited.
+#
+# Related options:
+#     * None
+#
+#  (integer value)
+#image_location_quota = 10
+
+# DEPRECATED:
+# Python module path of data access API.
+#
+# Specifies the path to the API to use for accessing the data model.
+# This option determines how the image catalog data will be accessed.
+#
+# Possible values:
+#     * glance.db.sqlalchemy.api
+#     * glance.db.registry.api
+#     * glance.db.simple.api
+#
+# If this option is set to ``glance.db.sqlalchemy.api`` then the image
+# catalog data is stored in and read from the database via the
+# SQLAlchemy Core and ORM APIs.
+#
+# Setting this option to ``glance.db.registry.api`` will force all
+# database access requests to be routed through the Registry service.
+# This avoids data access from the Glance API nodes for an added layer
+# of security, scalability and manageability.
+#
+# NOTE: In v2 OpenStack Images API, the registry service is optional.
+# In order to use the Registry API in v2, the option
+# ``enable_v2_registry`` must be set to ``True``.
+#
+# Finally, when this configuration option is set to
+# ``glance.db.simple.api``, image catalog data is stored in and read
+# from an in-memory data structure. This is primarily used for testing.
+#
+# Related options:
+#     * enable_v2_api
+#     * enable_v2_registry
+#
+#  (string value)
+# This option is deprecated for removal since Queens.
+# Its value may be silently ignored in the future.
+# Reason:
+# Glance registry service is deprecated for removal.
+#
+# More information can be found from the spec:
+# http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance
+# /deprecate-registry.html
+#data_api = glance.db.sqlalchemy.api
+
+#
+# The default number of results to return for a request.
+#
+# Responses to certain API requests, like list images, may return
+# multiple items. The number of results returned can be explicitly
+# controlled by specifying the ``limit`` parameter in the API request.
+# However, if a ``limit`` parameter is not specified, this
+# configuration value will be used as the default number of results to
+# be returned for any API request.
+#
+# NOTES:
+#     * The value of this configuration option may not be greater than
+#       the value specified by ``api_limit_max``.
+#     * Setting this to a very large value may slow down database
+#       queries and increase response times. Setting this to a
+#       very low value may result in poor user experience.
+#
+# Possible values:
+#     * Any positive integer
+#
+# Related options:
+#     * api_limit_max
+#
+#  (integer value)
+# Minimum value: 1
+#limit_param_default = 25
+
+#
+# Maximum number of results that could be returned by a request.
+#
+# As described in the help text of ``limit_param_default``, some
+# requests may return multiple results. The number of results to be
+# returned are governed either by the ``limit`` parameter in the
+# request or the ``limit_param_default`` configuration option.
+# The value in either case, can't be greater than the absolute maximum
+# defined by this configuration option. Anything greater than this
+# value is trimmed down to the maximum value defined here.
+#
+# NOTE: Setting this to a very large value may slow down database
+#       queries and increase response times. Setting this to a
+#       very low value may result in poor user experience.
+#
+# Possible values:
+#     * Any positive integer
+#
+# Related options:
+#     * limit_param_default
+#
+#  (integer value)
+# Minimum value: 1
+#api_limit_max = 1000
+
+#
+# Show direct image location when returning an image.
+#
+# This configuration option indicates whether to show the direct image
+# location when returning image details to the user. The direct image
+# location is where the image data is stored in backend storage. This
+# image location is shown under the image property ``direct_url``.
+#
+# When multiple image locations exist for an image, the best location
+# is displayed based on the location strategy indicated by the
+# configuration option ``location_strategy``.
+#
+# NOTES:
+#     * Revealing image locations can present a GRAVE SECURITY RISK as
+#       image locations can sometimes include credentials. Hence, this
+#       is set to ``False`` by default. Set this to ``True`` with
+#       EXTREME CAUTION and ONLY IF you know what you are doing!
+#     * If an operator wishes to avoid showing any image location(s)
+#       to the user, then both this option and
+#       ``show_multiple_locations`` MUST be set to ``False``.
+#
+# Possible values:
+#     * True
+#     * False
+#
+# Related options:
+#     * show_multiple_locations
+#     * location_strategy
+#
+#  (boolean value)
+#show_image_direct_url = false
+
+# DEPRECATED:
+# Show all image locations when returning an image.
+#
+# This configuration option indicates whether to show all the image
+# locations when returning image details to the user. When multiple
+# image locations exist for an image, the locations are ordered based
+# on the location strategy indicated by the configuration opt
+# ``location_strategy``. The image locations are shown under the
+# image property ``locations``.
+#
+# NOTES:
+#     * Revealing image locations can present a GRAVE SECURITY RISK as
+#       image locations can sometimes include credentials. Hence, this
+#       is set to ``False`` by default. Set this to ``True`` with
+#       EXTREME CAUTION and ONLY IF you know what you are doing!
+#     * If an operator wishes to avoid showing any image location(s)
+#       to the user, then both this option and
+#       ``show_image_direct_url`` MUST be set to ``False``.
+#
+# Possible values:
+#     * True
+#     * False
+#
+# Related options:
+#     * show_image_direct_url
+#     * location_strategy
+#
+#  (boolean value)
+# This option is deprecated for removal since Newton.
+# Its value may be silently ignored in the future.
+# Reason: This option will be removed in the Pike release or later because the
+# same functionality can be achieved with greater granularity by using policies.
+# Please see the Newton release notes for more information.
+#show_multiple_locations = false
+
+#
+# Maximum size of image a user can upload in bytes.
+#
+# An image upload greater than the size mentioned here would result
+# in an image creation failure. This configuration option defaults to
+# 1099511627776 bytes (1 TiB).
+#
+# NOTES:
+#     * This value should only be increased after careful
+#       consideration and must be set less than or equal to
+#       8 EiB (9223372036854775808).
+#     * This value must be set with careful consideration of the
+#       backend storage capacity. Setting this to a very low value
+#       may result in a large number of image failures. And, setting
+#       this to a very large value may result in faster consumption
+#       of storage. Hence, this must be set according to the nature of
+#       images created and storage capacity available.
+#
+# Possible values:
+#     * Any positive number less than or equal to 9223372036854775808
+#
+#  (integer value)
+# Minimum value: 1
+# Maximum value: 9223372036854775808
+#image_size_cap = 1099511627776
+
+#
+# Maximum amount of image storage per tenant.
+#
+# This enforces an upper limit on the cumulative storage consumed by all images
+# of a tenant across all stores. This is a per-tenant limit.
+#
+# The default unit for this configuration option is Bytes. However, storage
+# units can be specified using case-sensitive literals ``B``, ``KB``, ``MB``,
+# ``GB`` and ``TB`` representing Bytes, KiloBytes, MegaBytes, GigaBytes and
+# TeraBytes respectively. Note that there should not be any space between the
+# value and unit. Value ``0`` signifies no quota enforcement. Negative values
+# are invalid and result in errors.
+#
+# Possible values:
+#     * A string that is a valid concatenation of a non-negative integer
+#       representing the storage value and an optional string literal
+#       representing storage units as mentioned above.
+#
+# Related options:
+#     * None
+#
+#  (string value)
+#user_storage_quota = 0
+
+#
+# Deploy the v2 OpenStack Images API.
+#
+# When this option is set to ``True``, Glance service will respond
+# to requests on registered endpoints conforming to the v2 OpenStack
+# Images API.
+#
+# NOTES:
+#     * If this option is disabled, then the ``enable_v2_registry``
+#       option, which is enabled by default, is also recommended
+#       to be disabled.
+#
+# Possible values:
+#     * True
+#     * False
+#
+# Related options:
+#     * enable_v2_registry
+#
+#  (boolean value)
+#enable_v2_api = true
+
+#
+#                     DEPRECATED FOR REMOVAL
+#  (boolean value)
+#enable_v1_registry = true
+
+# DEPRECATED:
+# Deploy the v2 API Registry service.
+#
+# When this option is set to ``True``, the Registry service
+# will be enabled in Glance for v2 API requests.
+#
+# NOTES:
+#     * Use of Registry is optional in v2 API, so this option
+#       must only be enabled if both ``enable_v2_api`` is set to
+#       ``True`` and the ``data_api`` option is set to
+#       ``glance.db.registry.api``.
+#
+#     * If deploying only the v1 OpenStack Images API, this option,
+#       which is enabled by default, should be disabled.
+#
+# Possible values:
+#     * True
+#     * False
+#
+# Related options:
+#     * enable_v2_api
+#     * data_api
+#
+#  (boolean value)
+# This option is deprecated for removal since Queens.
+# Its value may be silently ignored in the future.
+# Reason:
+# Glance registry service is deprecated for removal.
+#
+# More information can be found from the spec:
+# http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance
+# /deprecate-registry.html
+#enable_v2_registry = true
+
+#
+# Host address of the pydev server.
+#
+# Provide a string value representing the hostname or IP of the
+# pydev server to use for debugging. The pydev server listens for
+# debug connections on this address, facilitating remote debugging
+# in Glance.
+#
+# Possible values:
+#     * Valid hostname
+#     * Valid IP address
+#
+# Related options:
+#     * None
+#
+#  (host address value)
+#pydev_worker_debug_host = localhost
+
+#
+# Port number that the pydev server will listen on.
+#
+# Provide a port number to bind the pydev server to. The pydev
+# process accepts debug connections on this port and facilitates
+# remote debugging in Glance.
+#
+# Possible values:
+#     * A valid port number
+#
+# Related options:
+#     * None
+#
+#  (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#pydev_worker_debug_port = 5678
+
+#
+# AES key for encrypting store location metadata.
+#
+# Provide a string value representing the AES cipher to use for
+# encrypting Glance store metadata.
+#
+# NOTE: The AES key to use must be set to a random string of length
+# 16, 24 or 32 bytes.
+#
+# Possible values:
+#     * String value representing a valid AES key
+#
+# Related options:
+#     * None
+#
+#  (string value)
+#metadata_encryption_key = <None>
+
+#
+# Digest algorithm to use for digital signature.
+#
+# Provide a string value representing the digest algorithm to
+# use for generating digital signatures. By default, ``sha256``
+# is used.
+#
+# To get a list of the available algorithms supported by the version
+# of OpenSSL on your platform, run the command:
+# ``openssl list-message-digest-algorithms``.
+# Examples are 'sha1', 'sha256', and 'sha512'.
+#
+# NOTE: ``digest_algorithm`` is not related to Glance's image signing
+# and verification. It is only used to sign the universally unique
+# identifier (UUID) as a part of the certificate file and key file
+# validation.
+#
+# Possible values:
+#     * An OpenSSL message digest algorithm identifier
+#
+# Relation options:
+#     * None
+#
+#  (string value)
+#digest_algorithm = sha256
+
+#
+# The URL provides location where the temporary data will be stored
+#
+# This option is for Glance internal use only. Glance will save the
+# image data uploaded by the user to 'staging' endpoint during the
+# image import process.
+#
+# This option does not change the 'staging' API endpoint by any means.
+#
+# NOTE: It is discouraged to use same path as [task]/work_dir
+#
+# NOTE: 'file://<absolute-directory-path>' is the only option
+# api_image_import flow will support for now.
+#
+# NOTE: The staging path must be on shared filesystem available to all
+# Glance API nodes.
+#
+# Possible values:
+#     * String starting with 'file://' followed by absolute FS path
+#
+# Related options:
+#     * [task]/work_dir
+#
+#  (string value)
+#node_staging_uri = file:///tmp/staging/
+
+#
+# List of enabled Image Import Methods
+#
+# Both 'glance-direct' and 'web-download' are enabled by default.
+#
+# Related options:
+#     * [DEFAULT]/node_staging_uri (list value)
+#enabled_import_methods = [glance-direct,web-download]
+
+#
+# The amount of time, in seconds, to delay image scrubbing.
+#
+# When delayed delete is turned on, an image is put into ``pending_delete``
+# state upon deletion until the scrubber deletes its image data. Typically, soon
+# after the image is put into ``pending_delete`` state, it is available for
+# scrubbing. However, scrubbing can be delayed until a later point using this
+# configuration option. This option denotes the time period an image spends in
+# ``pending_delete`` state before it is available for scrubbing.
+#
+# It is important to realize that this has storage implications. The larger the
+# ``scrub_time``, the longer the time to reclaim backend storage from deleted
+# images.
+#
+# Possible values:
+#     * Any non-negative integer
+#
+# Related options:
+#     * ``delayed_delete``
+#
+#  (integer value)
+# Minimum value: 0
+#scrub_time = 0
+
+#
+# The size of thread pool to be used for scrubbing images.
+#
+# When there are a large number of images to scrub, it is beneficial to scrub
+# images in parallel so that the scrub queue stays in control and the backend
+# storage is reclaimed in a timely fashion. This configuration option denotes
+# the maximum number of images to be scrubbed in parallel. The default value is
+# one, which signifies serial scrubbing. Any value above one indicates parallel
+# scrubbing.
+#
+# Possible values:
+#     * Any non-zero positive integer
+#
+# Related options:
+#     * ``delayed_delete``
+#
+#  (integer value)
+# Minimum value: 1
+#scrub_pool_size = 1
+
+#
+# Turn on/off delayed delete.
+#
+# Typically when an image is deleted, the ``glance-api`` service puts the image
+# into ``deleted`` state and deletes its data at the same time. Delayed delete
+# is a feature in Glance that delays the actual deletion of image data until a
+# later point in time (as determined by the configuration option
+# ``scrub_time``).
+# When delayed delete is turned on, the ``glance-api`` service puts the image
+# into ``pending_delete`` state upon deletion and leaves the image data in the
+# storage backend for the image scrubber to delete at a later time. The image
+# scrubber will move the image into ``deleted`` state upon successful deletion
+# of image data.
+#
+# NOTE: When delayed delete is turned on, image scrubber MUST be running as a
+# periodic task to prevent the backend storage from filling up with undesired
+# usage.
+#
+# Possible values:
+#     * True
+#     * False
+#
+# Related options:
+#     * ``scrub_time``
+#     * ``wakeup_time``
+#     * ``scrub_pool_size``
+#
+#  (boolean value)
+#delayed_delete = false
+
+#
+# Time interval, in seconds, between scrubber runs in daemon mode.
+#
+# Scrubber can be run either as a cron job or daemon. When run as a daemon, this
+# configuration time specifies the time period between two runs. When the
+# scrubber wakes up, it fetches and scrubs all ``pending_delete`` images that
+# are available for scrubbing after taking ``scrub_time`` into consideration.
+#
+# If the wakeup time is set to a large number, there may be a large number of
+# images to be scrubbed for each run. Also, this impacts how quickly the backend
+# storage is reclaimed.
+#
+# Possible values:
+#     * Any non-negative integer
+#
+# Related options:
+#     * ``daemon``
+#     * ``delayed_delete``
+#
+#  (integer value)
+# Minimum value: 0
+wakeup_time = {{ server.get('wakeup_time', 300) }}
+
+#
+# Run scrubber as a daemon.
+#
+# This boolean configuration option indicates whether scrubber should
+# run as a long-running process that wakes up at regular intervals to
+# scrub images. The wake up interval can be specified using the
+# configuration option ``wakeup_time``.
+#
+# If this configuration option is set to ``False``, which is the
+# default value, scrubber runs once to scrub images and exits. In this
+# case, if the operator wishes to implement continuous scrubbing of
+# images, scrubber needs to be scheduled as a cron job.
+#
+# Possible values:
+#     * True
+#     * False
+#
+# Related options:
+#     * ``wakeup_time``
+#
+#  (boolean value)
+daemon = {{ server.get('daemon', 'false') }}
+
+#
+# Restore the image status from 'pending_delete' to 'active'.
+#
+# This option is used by administrator to reset the image's status from
+# 'pending_delete' to 'active' when the image is deleted by mistake and
+# 'pending delete' feature is enabled in Glance. Please make sure the
+# glance-scrubber daemon is stopped before restoring the image to avoid image
+# data inconsistency.
+#
+# Possible values:
+#     * image's uuid
+#
+#  (string value)
+#restore = <None>
+
+{%- if server.logging is defined %}
+{%- set _data = server.logging %}
+{%- do _data.update({'log_file': '/var/log/glance/scrubber.log'}) %}
+{%- include "oslo_templates/files/" ~ server.version ~ "/oslo/_log.conf" %}
+{%- endif %}
+
+
+[database]
+{%- set _data = server.database %}
+{%- if _data.ssl is defined and 'cacert_file' not in _data.get('ssl', {}).keys() %}{% do _data['ssl'].update({'cacert_file': server.cacert_file}) %}{% endif %}
+{%- include "oslo_templates/files/" ~ server.version ~ "/oslo/_database.conf" %}
+
+
+[glance_store]
+
+#
+# From glance.store
+#
+
+# DEPRECATED:
+# List of enabled Glance stores.
+#
+# Register the storage backends to use for storing disk images
+# as a comma separated list. The default stores enabled for
+# storing disk images with Glance are ``file`` and ``http``.
+#
+# Possible values:
+#     * A comma separated list that could include:
+#         * file
+#         * http
+#         * swift
+#         * rbd
+#         * sheepdog
+#         * cinder
+#         * vmware
+#
+# Related Options:
+#     * default_store
+#
+#  (list value)
+# This option is deprecated for removal since Rocky.
+# Its value may be silently ignored in the future.
+# Reason:
+# This option is deprecated against new config option
+# ``enabled_backends`` which helps to configure multiple backend stores
+# of different schemes.
+#
+# This option is scheduled for removal in the Stein development
+# cycle.
+#stores = file,http
+
+# DEPRECATED:
+# The default scheme to use for storing images.
+#
+# Provide a string value representing the default scheme to use for
+# storing images. If not set, Glance uses ``file`` as the default
+# scheme to store images with the ``file`` store.
+#
+# NOTE: The value given for this configuration option must be a valid
+# scheme for a store registered with the ``stores`` configuration
+# option.
+#
+# Possible values:
+#     * file
+#     * filesystem
+#     * http
+#     * https
+#     * swift
+#     * swift+http
+#     * swift+https
+#     * swift+config
+#     * rbd
+#     * sheepdog
+#     * cinder
+#     * vsphere
+#
+# Related Options:
+#     * stores
+#
+#  (string value)
+# Possible values:
+# file - <No description provided>
+# filesystem - <No description provided>
+# http - <No description provided>
+# https - <No description provided>
+# swift - <No description provided>
+# swift+http - <No description provided>
+# swift+https - <No description provided>
+# swift+config - <No description provided>
+# rbd - <No description provided>
+# sheepdog - <No description provided>
+# cinder - <No description provided>
+# vsphere - <No description provided>
+# This option is deprecated for removal since Rocky.
+# Its value may be silently ignored in the future.
+# Reason:
+# This option is deprecated against new config option
+# ``default_backend`` which acts similar to ``default_store`` config
+# option.
+#
+# This option is scheduled for removal in the Stein development
+# cycle.
+#default_store = file
+
+# DEPRECATED:
+# Minimum interval in seconds to execute updating dynamic storage
+# capabilities based on current backend status.
+#
+# Provide an integer value representing time in seconds to set the
+# minimum interval before an update of dynamic storage capabilities
+# for a storage backend can be attempted. Setting
+# ``store_capabilities_update_min_interval`` does not mean updates
+# occur periodically based on the set interval. Rather, the update
+# is performed at the elapse of this interval set, if an operation
+# of the store is triggered.
+#
+# By default, this option is set to zero and is disabled. Provide an
+# integer value greater than zero to enable this option.
+#
+# NOTE 1: For more information on store capabilities and their updates,
+# please visit: https://specs.openstack.org/openstack/glance-specs/specs/kilo
+# /store-capabilities.html
+#
+# For more information on setting up a particular store in your
+# deployment and help with the usage of this feature, please contact
+# the storage driver maintainers listed here:
+# https://docs.openstack.org/glance_store/latest/user/drivers.html
+#
+# NOTE 2: The dynamic store update capability described above is not
+# implemented by any current store drivers.  Thus, this option DOES
+# NOT DO ANYTHING (and it never has).  It is DEPRECATED and scheduled
+# for removal early in the Stein development cycle.
+#
+# Possible values:
+#     * Zero
+#     * Positive integer
+#
+# Related Options:
+#     * None
+#
+#  (integer value)
+# Minimum value: 0
+# This option is deprecated for removal since Rocky.
+# Its value may be silently ignored in the future.
+# Reason:
+# This option configures a stub method that has not been implemented
+# for any existing store drivers.  Hence it is non-operational, and
+# giving it a value does absolutely nothing.
+#
+# This option is scheduled for removal early in the Stein development
+# cycle.
+#store_capabilities_update_min_interval = 0
+
+#
+# Information to match when looking for cinder in the service catalog.
+#
+# When the ``cinder_endpoint_template`` is not set and any of
+# ``cinder_store_auth_address``, ``cinder_store_user_name``,
+# ``cinder_store_project_name``, ``cinder_store_password`` is not set,
+# cinder store uses this information to lookup cinder endpoint from the service
+# catalog in the current context. ``cinder_os_region_name``, if set, is taken
+# into consideration to fetch the appropriate endpoint.
+#
+# The service catalog can be listed by the ``openstack catalog list`` command.
+#
+# Possible values:
+#     * A string of of the following form:
+#       ``<service_type>:<service_name>:<interface>``
+#       At least ``service_type`` and ``interface`` should be specified.
+#       ``service_name`` can be omitted.
+#
+# Related options:
+#     * cinder_os_region_name
+#     * cinder_endpoint_template
+#     * cinder_store_auth_address
+#     * cinder_store_user_name
+#     * cinder_store_project_name
+#     * cinder_store_password
+#
+#  (string value)
+#cinder_catalog_info = volumev2::publicURL
+
+#
+# Override service catalog lookup with template for cinder endpoint.
+#
+# When this option is set, this value is used to generate cinder endpoint,
+# instead of looking up from the service catalog.
+# This value is ignored if ``cinder_store_auth_address``,
+# ``cinder_store_user_name``, ``cinder_store_project_name``, and
+# ``cinder_store_password`` are specified.
+#
+# If this configuration option is set, ``cinder_catalog_info`` will be ignored.
+#
+# Possible values:
+#     * URL template string for cinder endpoint, where ``%%(tenant)s`` is
+#       replaced with the current tenant (project) name.
+#       For example: ``http://cinder.openstack.example.org/v2/%%(tenant)s``
+#
+# Related options:
+#     * cinder_store_auth_address
+#     * cinder_store_user_name
+#     * cinder_store_project_name
+#     * cinder_store_password
+#     * cinder_catalog_info
+#
+#  (string value)
+#cinder_endpoint_template = <None>
+
+#
+# Region name to lookup cinder service from the service catalog.
+#
+# This is used only when ``cinder_catalog_info`` is used for determining the
+# endpoint. If set, the lookup for cinder endpoint by this node is filtered to
+# the specified region. It is useful when multiple regions are listed in the
+# catalog. If this is not set, the endpoint is looked up from every region.
+#
+# Possible values:
+#     * A string that is a valid region name.
+#
+# Related options:
+#     * cinder_catalog_info
+#
+#  (string value)
+# Deprecated group/name - [glance_store]/os_region_name
+#cinder_os_region_name = <None>
+
+#
+# Location of a CA certificates file used for cinder client requests.
+#
+# The specified CA certificates file, if set, is used to verify cinder
+# connections via HTTPS endpoint. If the endpoint is HTTP, this value is
+# ignored.
+# ``cinder_api_insecure`` must be set to ``True`` to enable the verification.
+#
+# Possible values:
+#     * Path to a ca certificates file
+#
+# Related options:
+#     * cinder_api_insecure
+#
+#  (string value)
+#cinder_ca_certificates_file = <None>
+
+#
+# Number of cinderclient retries on failed http calls.
+#
+# When a call failed by any errors, cinderclient will retry the call up to the
+# specified times after sleeping a few seconds.
+#
+# Possible values:
+#     * A positive integer
+#
+# Related options:
+#     * None
+#
+#  (integer value)
+# Minimum value: 0
+#cinder_http_retries = 3
+
+#
+# Time period, in seconds, to wait for a cinder volume transition to
+# complete.
+#
+# When the cinder volume is created, deleted, or attached to the glance node to
+# read/write the volume data, the volume's state is changed. For example, the
+# newly created volume status changes from ``creating`` to ``available`` after
+# the creation process is completed. This specifies the maximum time to wait for
+# the status change. If a timeout occurs while waiting, or the status is changed
+# to an unexpected value (e.g. `error``), the image creation fails.
+#
+# Possible values:
+#     * A positive integer
+#
+# Related options:
+#     * None
+#
+#  (integer value)
+# Minimum value: 0
+#cinder_state_transition_timeout = 300
+
+#
+# Allow to perform insecure SSL requests to cinder.
+#
+# If this option is set to True, HTTPS endpoint connection is verified using the
+# CA certificates file specified by ``cinder_ca_certificates_file`` option.
+#
+# Possible values:
+#     * True
+#     * False
+#
+# Related options:
+#     * cinder_ca_certificates_file
+#
+#  (boolean value)
+#cinder_api_insecure = false
+
+#
+# The address where the cinder authentication service is listening.
+#
+# When all of ``cinder_store_auth_address``, ``cinder_store_user_name``,
+# ``cinder_store_project_name``, and ``cinder_store_password`` options are
+# specified, the specified values are always used for the authentication.
+# This is useful to hide the image volumes from users by storing them in a
+# project/tenant specific to the image service. It also enables users to share
+# the image volume among other projects under the control of glance's ACL.
+#
+# If either of these options are not set, the cinder endpoint is looked up
+# from the service catalog, and current context's user and project are used.
+#
+# Possible values:
+#     * A valid authentication service address, for example:
+#       ``http://openstack.example.org/identity/v2.0``
+#
+# Related options:
+#     * cinder_store_user_name
+#     * cinder_store_password
+#     * cinder_store_project_name
+#
+#  (string value)
+#cinder_store_auth_address = <None>
+
+#
+# User name to authenticate against cinder.
+#
+# This must be used with all the following related options. If any of these are
+# not specified, the user of the current context is used.
+#
+# Possible values:
+#     * A valid user name
+#
+# Related options:
+#     * cinder_store_auth_address
+#     * cinder_store_password
+#     * cinder_store_project_name
+#
+#  (string value)
+#cinder_store_user_name = <None>
+
+#
+# Password for the user authenticating against cinder.
+#
+# This must be used with all the following related options. If any of these are
+# not specified, the user of the current context is used.
+#
+# Possible values:
+#     * A valid password for the user specified by ``cinder_store_user_name``
+#
+# Related options:
+#     * cinder_store_auth_address
+#     * cinder_store_user_name
+#     * cinder_store_project_name
+#
+#  (string value)
+#cinder_store_password = <None>
+
+#
+# Project name where the image volume is stored in cinder.
+#
+# If this configuration option is not set, the project in current context is
+# used.
+#
+# This must be used with all the following related options. If any of these are
+# not specified, the project of the current context is used.
+#
+# Possible values:
+#     * A valid project name
+#
+# Related options:
+#     * ``cinder_store_auth_address``
+#     * ``cinder_store_user_name``
+#     * ``cinder_store_password``
+#
+#  (string value)
+#cinder_store_project_name = <None>
+
+#
+# Path to the rootwrap configuration file to use for running commands as root.
+#
+# The cinder store requires root privileges to operate the image volumes (for
+# connecting to iSCSI/FC volumes and reading/writing the volume data, etc.).
+# The configuration file should allow the required commands by cinder store and
+# os-brick library.
+#
+# Possible values:
+#     * Path to the rootwrap config file
+#
+# Related options:
+#     * None
+#
+#  (string value)
+#rootwrap_config = /etc/glance/rootwrap.conf
+
+#
+# Volume type that will be used for volume creation in cinder.
+#
+# Some cinder backends can have several volume types to optimize storage usage.
+# Adding this option allows an operator to choose a specific volume type
+# in cinder that can be optimized for images.
+#
+# If this is not set, then the default volume type specified in the cinder
+# configuration will be used for volume creation.
+#
+# Possible values:
+#     * A valid volume type from cinder
+#
+# Related options:
+#     * None
+#
+#  (string value)
+#cinder_volume_type = <None>
+
+#
+# Directory to which the filesystem backend store writes images.
+#
+# Upon start up, Glance creates the directory if it doesn't already
+# exist and verifies write access to the user under which
+# ``glance-api`` runs. If the write access isn't available, a
+# ``BadStoreConfiguration`` exception is raised and the filesystem
+# store may not be available for adding new images.
+#
+# NOTE: This directory is used only when filesystem store is used as a
+# storage backend. Either ``filesystem_store_datadir`` or
+# ``filesystem_store_datadirs`` option must be specified in
+# ``glance-api.conf``. If both options are specified, a
+# ``BadStoreConfiguration`` will be raised and the filesystem store
+# may not be available for adding new images.
+#
+# Possible values:
+#     * A valid path to a directory
+#
+# Related options:
+#     * ``filesystem_store_datadirs``
+#     * ``filesystem_store_file_perm``
+#
+#  (string value)
+#filesystem_store_datadir = /var/lib/glance/images
+
+#
+# List of directories and their priorities to which the filesystem
+# backend store writes images.
+#
+# The filesystem store can be configured to store images in multiple
+# directories as opposed to using a single directory specified by the
+# ``filesystem_store_datadir`` configuration option. When using
+# multiple directories, each directory can be given an optional
+# priority to specify the preference order in which they should
+# be used. Priority is an integer that is concatenated to the
+# directory path with a colon where a higher value indicates higher
+# priority. When two directories have the same priority, the directory
+# with most free space is used. When no priority is specified, it
+# defaults to zero.
+#
+# More information on configuring filesystem store with multiple store
+# directories can be found at
+# https://docs.openstack.org/glance/latest/configuration/configuring.html
+#
+# NOTE: This directory is used only when filesystem store is used as a
+# storage backend. Either ``filesystem_store_datadir`` or
+# ``filesystem_store_datadirs`` option must be specified in
+# ``glance-api.conf``. If both options are specified, a
+# ``BadStoreConfiguration`` will be raised and the filesystem store
+# may not be available for adding new images.
+#
+# Possible values:
+#     * List of strings of the following form:
+#         * ``<a valid directory path>:<optional integer priority>``
+#
+# Related options:
+#     * ``filesystem_store_datadir``
+#     * ``filesystem_store_file_perm``
+#
+#  (multi valued)
+#filesystem_store_datadirs =
+
+#
+# Filesystem store metadata file.
+#
+# The path to a file which contains the metadata to be returned with
+# any location associated with the filesystem store. The file must
+# contain a valid JSON object. The object should contain the keys
+# ``id`` and ``mountpoint``. The value for both keys should be a
+# string.
+#
+# Possible values:
+#     * A valid path to the store metadata file
+#
+# Related options:
+#     * None
+#
+#  (string value)
+#filesystem_store_metadata_file = <None>
+{%- if server.filesystem_store_metadata_file is defined %}
+filesystem_store_metadata_file = {{ server.get('filesystem_store_metadata_file', '/etc/glance/filesystem_store_metadata.json') }}
+{%- endif %}
+
+#
+# File access permissions for the image files.
+#
+# Set the intended file access permissions for image data. This provides
+# a way to enable other services, e.g. Nova, to consume images directly
+# from the filesystem store. The users running the services that are
+# intended to be given access to could be made a member of the group
+# that owns the files created. Assigning a value less then or equal to
+# zero for this configuration option signifies that no changes be made
+# to the  default permissions. This value will be decoded as an octal
+# digit.
+#
+# For more information, please refer the documentation at
+# https://docs.openstack.org/glance/latest/configuration/configuring.html
+#
+# Possible values:
+#     * A valid file access permission
+#     * Zero
+#     * Any negative integer
+#
+# Related options:
+#     * None
+#
+#  (integer value)
+#filesystem_store_file_perm = 0
+
+#
+# Path to the CA bundle file.
+#
+# This configuration option enables the operator to use a custom
+# Certificate Authority file to verify the remote server certificate. If
+# this option is set, the ``https_insecure`` option will be ignored and
+# the CA file specified will be used to authenticate the server
+# certificate and establish a secure connection to the server.
+#
+# Possible values:
+#     * A valid path to a CA file
+#
+# Related options:
+#     * https_insecure
+#
+#  (string value)
+#https_ca_certificates_file = <None>
+
+#
+# Set verification of the remote server certificate.
+#
+# This configuration option takes in a boolean value to determine
+# whether or not to verify the remote server certificate. If set to
+# True, the remote server certificate is not verified. If the option is
+# set to False, then the default CA truststore is used for verification.
+#
+# This option is ignored if ``https_ca_certificates_file`` is set.
+# The remote server certificate will then be verified using the file
+# specified using the ``https_ca_certificates_file`` option.
+#
+# Possible values:
+#     * True
+#     * False
+#
+# Related options:
+#     * https_ca_certificates_file
+#
+#  (boolean value)
+#https_insecure = true
+
+#
+# The http/https proxy information to be used to connect to the remote
+# server.
+#
+# This configuration option specifies the http/https proxy information
+# that should be used to connect to the remote server. The proxy
+# information should be a key value pair of the scheme and proxy, for
+# example, http:10.0.0.1:3128. You can also specify proxies for multiple
+# schemes by separating the key value pairs with a comma, for example,
+# http:10.0.0.1:3128, https:10.0.0.1:1080.
+#
+# Possible values:
+#     * A comma separated list of scheme:proxy pairs as described above
+#
+# Related options:
+#     * None
+#
+#  (dict value)
+#http_proxy_information =
+
+#
+# Size, in megabytes, to chunk RADOS images into.
+#
+# Provide an integer value representing the size in megabytes to chunk
+# Glance images into. The default chunk size is 8 megabytes. For optimal
+# performance, the value should be a power of two.
+#
+# When Ceph's RBD object storage system is used as the storage backend
+# for storing Glance images, the images are chunked into objects of the
+# size set using this option. These chunked objects are then stored
+# across the distributed block data store to use for Glance.
+#
+# Possible Values:
+#     * Any positive integer value
+#
+# Related options:
+#     * None
+#
+#  (integer value)
+# Minimum value: 1
+#rbd_store_chunk_size = 8
+
+#
+# RADOS pool in which images are stored.
+#
+# When RBD is used as the storage backend for storing Glance images, the
+# images are stored by means of logical grouping of the objects (chunks
+# of images) into a ``pool``. Each pool is defined with the number of
+# placement groups it can contain. The default pool that is used is
+# 'images'.
+#
+# More information on the RBD storage backend can be found here:
+# http://ceph.com/planet/how-data-is-stored-in-ceph-cluster/
+#
+# Possible Values:
+#     * A valid pool name
+#
+# Related options:
+#     * None
+#
+#  (string value)
+#rbd_store_pool = images
+
+#
+# RADOS user to authenticate as.
+#
+# This configuration option takes in the RADOS user to authenticate as.
+# This is only needed when RADOS authentication is enabled and is
+# applicable only if the user is using Cephx authentication. If the
+# value for this option is not set by the user or is set to None, a
+# default value will be chosen, which will be based on the client.
+# section in rbd_store_ceph_conf.
+#
+# Possible Values:
+#     * A valid RADOS user
+#
+# Related options:
+#     * rbd_store_ceph_conf
+#
+#  (string value)
+#rbd_store_user = <None>
+
+#
+# Ceph configuration file path.
+#
+# This configuration option takes in the path to the Ceph configuration
+# file to be used. If the value for this option is not set by the user
+# or is set to None, librados will locate the default configuration file
+# which is located at /etc/ceph/ceph.conf. If using Cephx
+# authentication, this file should include a reference to the right
+# keyring in a client.<USER> section
+#
+# Possible Values:
+#     * A valid path to a configuration file
+#
+# Related options:
+#     * rbd_store_user
+#
+#  (string value)
+#rbd_store_ceph_conf = /etc/ceph/ceph.conf
+
+#
+# Timeout value for connecting to Ceph cluster.
+#
+# This configuration option takes in the timeout value in seconds used
+# when connecting to the Ceph cluster i.e. it sets the time to wait for
+# glance-api before closing the connection. This prevents glance-api
+# hangups during the connection to RBD. If the value for this option
+# is set to less than or equal to 0, no timeout is set and the default
+# librados value is used.
+#
+# Possible Values:
+#     * Any integer value
+#
+# Related options:
+#     * None
+#
+#  (integer value)
+#rados_connect_timeout = 0
+
+#
+# Chunk size for images to be stored in Sheepdog data store.
+#
+# Provide an integer value representing the size in mebibyte
+# (1048576 bytes) to chunk Glance images into. The default
+# chunk size is 64 mebibytes.
+#
+# When using Sheepdog distributed storage system, the images are
+# chunked into objects of this size and then stored across the
+# distributed data store to use for Glance.
+#
+# Chunk sizes, if a power of two, help avoid fragmentation and
+# enable improved performance.
+#
+# Possible values:
+#     * Positive integer value representing size in mebibytes.
+#
+# Related Options:
+#     * None
+#
+#  (integer value)
+# Minimum value: 1
+#sheepdog_store_chunk_size = 64
+
+#
+# Port number on which the sheep daemon will listen.
+#
+# Provide an integer value representing a valid port number on
+# which you want the Sheepdog daemon to listen on. The default
+# port is 7000.
+#
+# The Sheepdog daemon, also called 'sheep', manages the storage
+# in the distributed cluster by writing objects across the storage
+# network. It identifies and acts on the messages it receives on
+# the port number set using ``sheepdog_store_port`` option to store
+# chunks of Glance images.
+#
+# Possible values:
+#     * A valid port number (0 to 65535)
+#
+# Related Options:
+#     * sheepdog_store_address
+#
+#  (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#sheepdog_store_port = 7000
+
+#
+# Address to bind the Sheepdog daemon to.
+#
+# Provide a string value representing the address to bind the
+# Sheepdog daemon to. The default address set for the 'sheep'
+# is 127.0.0.1.
+#
+# The Sheepdog daemon, also called 'sheep', manages the storage
+# in the distributed cluster by writing objects across the storage
+# network. It identifies and acts on the messages directed to the
+# address set using ``sheepdog_store_address`` option to store
+# chunks of Glance images.
+#
+# Possible values:
+#     * A valid IPv4 address
+#     * A valid IPv6 address
+#     * A valid hostname
+#
+# Related Options:
+#     * sheepdog_store_port
+#
+#  (host address value)
+#sheepdog_store_address = 127.0.0.1
+
+#
+# Set verification of the server certificate.
+#
+# This boolean determines whether or not to verify the server
+# certificate. If this option is set to True, swiftclient won't check
+# for a valid SSL certificate when authenticating. If the option is set
+# to False, then the default CA truststore is used for verification.
+#
+# Possible values:
+#     * True
+#     * False
+#
+# Related options:
+#     * swift_store_cacert
+#
+#  (boolean value)
+#swift_store_auth_insecure = false
+
+#
+# Path to the CA bundle file.
+#
+# This configuration option enables the operator to specify the path to
+# a custom Certificate Authority file for SSL verification when
+# connecting to Swift.
+#
+# Possible values:
+#     * A valid path to a CA file
+#
+# Related options:
+#     * swift_store_auth_insecure
+#
+#  (string value)
+#swift_store_cacert = /etc/ssl/certs/ca-certificates.crt
+
+#
+# The region of Swift endpoint to use by Glance.
+#
+# Provide a string value representing a Swift region where Glance
+# can connect to for image storage. By default, there is no region
+# set.
+#
+# When Glance uses Swift as the storage backend to store images
+# for a specific tenant that has multiple endpoints, setting of a
+# Swift region with ``swift_store_region`` allows Glance to connect
+# to Swift in the specified region as opposed to a single region
+# connectivity.
+#
+# This option can be configured for both single-tenant and
+# multi-tenant storage.
+#
+# NOTE: Setting the region with ``swift_store_region`` is
+# tenant-specific and is necessary ``only if`` the tenant has
+# multiple endpoints across different regions.
+#
+# Possible values:
+#     * A string value representing a valid Swift region.
+#
+# Related Options:
+#     * None
+#
+#  (string value)
+#swift_store_region = RegionTwo
+
+#
+# The URL endpoint to use for Swift backend storage.
+#
+# Provide a string value representing the URL endpoint to use for
+# storing Glance images in Swift store. By default, an endpoint
+# is not set and the storage URL returned by ``auth`` is used.
+# Setting an endpoint with ``swift_store_endpoint`` overrides the
+# storage URL and is used for Glance image storage.
+#
+# NOTE: The URL should include the path up to, but excluding the
+# container. The location of an object is obtained by appending
+# the container and object to the configured URL.
+#
+# Possible values:
+#     * String value representing a valid URL path up to a Swift container
+#
+# Related Options:
+#     * None
+#
+#  (string value)
+#swift_store_endpoint = https://swift.openstack.example.org/v1/path_not_including_container_name
+
+#
+# Endpoint Type of Swift service.
+#
+# This string value indicates the endpoint type to use to fetch the
+# Swift endpoint. The endpoint type determines the actions the user will
+# be allowed to perform, for instance, reading and writing to the Store.
+# This setting is only used if swift_store_auth_version is greater than
+# 1.
+#
+# Possible values:
+#     * publicURL
+#     * adminURL
+#     * internalURL
+#
+# Related options:
+#     * swift_store_endpoint
+#
+#  (string value)
+# Possible values:
+# publicURL - <No description provided>
+# adminURL - <No description provided>
+# internalURL - <No description provided>
+#swift_store_endpoint_type = publicURL
+
+#
+# Type of Swift service to use.
+#
+# Provide a string value representing the service type to use for
+# storing images while using Swift backend storage. The default
+# service type is set to ``object-store``.
+#
+# NOTE: If ``swift_store_auth_version`` is set to 2, the value for
+# this configuration option needs to be ``object-store``. If using
+# a higher version of Keystone or a different auth scheme, this
+# option may be modified.
+#
+# Possible values:
+#     * A string representing a valid service type for Swift storage.
+#
+# Related Options:
+#     * None
+#
+#  (string value)
+#swift_store_service_type = object-store
+
+#
+# Name of single container to store images/name prefix for multiple containers
+#
+# When a single container is being used to store images, this configuration
+# option indicates the container within the Glance account to be used for
+# storing all images. When multiple containers are used to store images, this
+# will be the name prefix for all containers. Usage of single/multiple
+# containers can be controlled using the configuration option
+# ``swift_store_multiple_containers_seed``.
+#
+# When using multiple containers, the containers will be named after the value
+# set for this configuration option with the first N chars of the image UUID
+# as the suffix delimited by an underscore (where N is specified by
+# ``swift_store_multiple_containers_seed``).
+#
+# Example: if the seed is set to 3 and swift_store_container = ``glance``, then
+# an image with UUID ``fdae39a1-bac5-4238-aba4-69bcc726e848`` would be placed in
+# the container ``glance_fda``. All dashes in the UUID are included when
+# creating the container name but do not count toward the character limit, so
+# when N=10 the container name would be ``glance_fdae39a1-ba.``
+#
+# Possible values:
+#     * If using single container, this configuration option can be any string
+#       that is a valid swift container name in Glance's Swift account
+#     * If using multiple containers, this configuration option can be any
+#       string as long as it satisfies the container naming rules enforced by
+#       Swift. The value of ``swift_store_multiple_containers_seed`` should be
+#       taken into account as well.
+#
+# Related options:
+#     * ``swift_store_multiple_containers_seed``
+#     * ``swift_store_multi_tenant``
+#     * ``swift_store_create_container_on_put``
+#
+#  (string value)
+#swift_store_container = glance
+
+#
+# The size threshold, in MB, after which Glance will start segmenting image
+# data.
+#
+# Swift has an upper limit on the size of a single uploaded object. By default,
+# this is 5GB. To upload objects bigger than this limit, objects are segmented
+# into multiple smaller objects that are tied together with a manifest file.
+# For more detail, refer to
+# https://docs.openstack.org/swift/latest/overview_large_objects.html
+#
+# This configuration option specifies the size threshold over which the Swift
+# driver will start segmenting image data into multiple smaller files.
+# Currently, the Swift driver only supports creating Dynamic Large Objects.
+#
+# NOTE: This should be set by taking into account the large object limit
+# enforced by the Swift cluster in consideration.
+#
+# Possible values:
+#     * A positive integer that is less than or equal to the large object limit
+#       enforced by the Swift cluster in consideration.
+#
+# Related options:
+#     * ``swift_store_large_object_chunk_size``
+#
+#  (integer value)
+# Minimum value: 1
+#swift_store_large_object_size = 5120
+
+#
+# The maximum size, in MB, of the segments when image data is segmented.
+#
+# When image data is segmented to upload images that are larger than the limit
+# enforced by the Swift cluster, image data is broken into segments that are no
+# bigger than the size specified by this configuration option.
+# Refer to ``swift_store_large_object_size`` for more detail.
+#
+# For example: if ``swift_store_large_object_size`` is 5GB and
+# ``swift_store_large_object_chunk_size`` is 1GB, an image of size 6.2GB will be
+# segmented into 7 segments where the first six segments will be 1GB in size and
+# the seventh segment will be 0.2GB.
+#
+# Possible values:
+#     * A positive integer that is less than or equal to the large object limit
+#       enforced by Swift cluster in consideration.
+#
+# Related options:
+#     * ``swift_store_large_object_size``
+#
+#  (integer value)
+# Minimum value: 1
+#swift_store_large_object_chunk_size = 200
+
+#
+# Create container, if it doesn't already exist, when uploading image.
+#
+# At the time of uploading an image, if the corresponding container doesn't
+# exist, it will be created provided this configuration option is set to True.
+# By default, it won't be created. This behavior is applicable for both single
+# and multiple containers mode.
+#
+# Possible values:
+#     * True
+#     * False
+#
+# Related options:
+#     * None
+#
+#  (boolean value)
+#swift_store_create_container_on_put = false
+
+#
+# Store images in tenant's Swift account.
+#
+# This enables multi-tenant storage mode which causes Glance images to be stored
+# in tenant specific Swift accounts. If this is disabled, Glance stores all
+# images in its own account. More details multi-tenant store can be found at
+# https://wiki.openstack.org/wiki/GlanceSwiftTenantSpecificStorage
+#
+# NOTE: If using multi-tenant swift store, please make sure
+# that you do not set a swift configuration file with the
+# 'swift_store_config_file' option.
+#
+# Possible values:
+#     * True
+#     * False
+#
+# Related options:
+#     * swift_store_config_file
+#
+#  (boolean value)
+#swift_store_multi_tenant = false
+
+#
+# Seed indicating the number of containers to use for storing images.
+#
+# When using a single-tenant store, images can be stored in one or more than one
+# containers. When set to 0, all images will be stored in one single container.
+# When set to an integer value between 1 and 32, multiple containers will be
+# used to store images. This configuration option will determine how many
+# containers are created. The total number of containers that will be used is
+# equal to 16^N, so if this config option is set to 2, then 16^2=256 containers
+# will be used to store images.
+#
+# Please refer to ``swift_store_container`` for more detail on the naming
+# convention. More detail about using multiple containers can be found at
+# https://specs.openstack.org/openstack/glance-specs/specs/kilo/swift-store-
+# multiple-containers.html
+#
+# NOTE: This is used only when swift_store_multi_tenant is disabled.
+#
+# Possible values:
+#     * A non-negative integer less than or equal to 32
+#
+# Related options:
+#     * ``swift_store_container``
+#     * ``swift_store_multi_tenant``
+#     * ``swift_store_create_container_on_put``
+#
+#  (integer value)
+# Minimum value: 0
+# Maximum value: 32
+#swift_store_multiple_containers_seed = 0
+
+#
+# List of tenants that will be granted admin access.
+#
+# This is a list of tenants that will be granted read/write access on
+# all Swift containers created by Glance in multi-tenant mode. The
+# default value is an empty list.
+#
+# Possible values:
+#     * A comma separated list of strings representing UUIDs of Keystone
+#       projects/tenants
+#
+# Related options:
+#     * None
+#
+#  (list value)
+#swift_store_admin_tenants =
+
+#
+# SSL layer compression for HTTPS Swift requests.
+#
+# Provide a boolean value to determine whether or not to compress
+# HTTPS Swift requests for images at the SSL layer. By default,
+# compression is enabled.
+#
+# When using Swift as the backend store for Glance image storage,
+# SSL layer compression of HTTPS Swift requests can be set using
+# this option. If set to False, SSL layer compression of HTTPS
+# Swift requests is disabled. Disabling this option may improve
+# performance for images which are already in a compressed format,
+# for example, qcow2.
+#
+# Possible values:
+#     * True
+#     * False
+#
+# Related Options:
+#     * None
+#
+#  (boolean value)
+#swift_store_ssl_compression = true
+
+#
+# The number of times a Swift download will be retried before the
+# request fails.
+#
+# Provide an integer value representing the number of times an image
+# download must be retried before erroring out. The default value is
+# zero (no retry on a failed image download). When set to a positive
+# integer value, ``swift_store_retry_get_count`` ensures that the
+# download is attempted this many more times upon a download failure
+# before sending an error message.
+#
+# Possible values:
+#     * Zero
+#     * Positive integer value
+#
+# Related Options:
+#     * None
+#
+#  (integer value)
+# Minimum value: 0
+#swift_store_retry_get_count = 0
+
+#
+# Time in seconds defining the size of the window in which a new
+# token may be requested before the current token is due to expire.
+#
+# Typically, the Swift storage driver fetches a new token upon the
+# expiration of the current token to ensure continued access to
+# Swift. However, some Swift transactions (like uploading image
+# segments) may not recover well if the token expires on the fly.
+#
+# Hence, by fetching a new token before the current token expiration,
+# we make sure that the token does not expire or is close to expiry
+# before a transaction is attempted. By default, the Swift storage
+# driver requests for a new token 60 seconds or less before the
+# current token expiration.
+#
+# Possible values:
+#     * Zero
+#     * Positive integer value
+#
+# Related Options:
+#     * None
+#
+#  (integer value)
+# Minimum value: 0
+#swift_store_expire_soon_interval = 60
+
+#
+# Use trusts for multi-tenant Swift store.
+#
+# This option instructs the Swift store to create a trust for each
+# add/get request when the multi-tenant store is in use. Using trusts
+# allows the Swift store to avoid problems that can be caused by an
+# authentication token expiring during the upload or download of data.
+#
+# By default, ``swift_store_use_trusts`` is set to ``True``(use of
+# trusts is enabled). If set to ``False``, a user token is used for
+# the Swift connection instead, eliminating the overhead of trust
+# creation.
+#
+# NOTE: This option is considered only when
+# ``swift_store_multi_tenant`` is set to ``True``
+#
+# Possible values:
+#     * True
+#     * False
+#
+# Related options:
+#     * swift_store_multi_tenant
+#
+#  (boolean value)
+#swift_store_use_trusts = true
+
+#
+# Buffer image segments before upload to Swift.
+#
+# Provide a boolean value to indicate whether or not Glance should
+# buffer image data to disk while uploading to swift. This enables
+# Glance to resume uploads on error.
+#
+# NOTES:
+# When enabling this option, one should take great care as this
+# increases disk usage on the API node. Be aware that depending
+# upon how the file system is configured, the disk space used
+# for buffering may decrease the actual disk space available for
+# the glance image cache.  Disk utilization will cap according to
+# the following equation:
+# (``swift_store_large_object_chunk_size`` * ``workers`` * 1000)
+#
+# Possible values:
+#     * True
+#     * False
+#
+# Related options:
+#     * swift_upload_buffer_dir
+#
+#  (boolean value)
+#swift_buffer_on_upload = false
+
+#
+# Reference to default Swift account/backing store parameters.
+#
+# Provide a string value representing a reference to the default set
+# of parameters required for using swift account/backing store for
+# image storage. The default reference value for this configuration
+# option is 'ref1'. This configuration option dereferences the
+# parameters and facilitates image storage in Swift storage backend
+# every time a new image is added.
+#
+# Possible values:
+#     * A valid string value
+#
+# Related options:
+#     * None
+#
+#  (string value)
+#default_swift_reference = ref1
+
+# DEPRECATED: Version of the authentication service to use. Valid versions are 2
+# and 3 for keystone and 1 (deprecated) for swauth and rackspace. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason:
+# The option 'auth_version' in the Swift back-end configuration file is
+# used instead.
+#swift_store_auth_version = 2
+
+# DEPRECATED: The address where the Swift authentication service is listening.
+# (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason:
+# The option 'auth_address' in the Swift back-end configuration file is
+# used instead.
+#swift_store_auth_address = <None>
+
+# DEPRECATED: The user to authenticate against the Swift authentication service.
+# (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason:
+# The option 'user' in the Swift back-end configuration file is set instead.
+#swift_store_user = <None>
+
+# DEPRECATED: Auth key for the user authenticating against the Swift
+# authentication service. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason:
+# The option 'key' in the Swift back-end configuration file is used
+# to set the authentication key instead.
+#swift_store_key = <None>
+
+#
+# Absolute path to the file containing the swift account(s)
+# configurations.
+#
+# Include a string value representing the path to a configuration
+# file that has references for each of the configured Swift
+# account(s)/backing stores. By default, no file path is specified
+# and customized Swift referencing is disabled. Configuring this
+# option is highly recommended while using Swift storage backend for
+# image storage as it avoids storage of credentials in the database.
+#
+# NOTE: Please do not configure this option if you have set
+# ``swift_store_multi_tenant`` to ``True``.
+#
+# Possible values:
+#     * String value representing an absolute path on the glance-api
+#       node
+#
+# Related options:
+#     * swift_store_multi_tenant
+#
+#  (string value)
+#swift_store_config_file = <None>
+
+#
+# Directory to buffer image segments before upload to Swift.
+#
+# Provide a string value representing the absolute path to the
+# directory on the glance node where image segments will be
+# buffered briefly before they are uploaded to swift.
+#
+# NOTES:
+# * This is required only when the configuration option
+#   ``swift_buffer_on_upload`` is set to True.
+# * This directory should be provisioned keeping in mind the
+#   ``swift_store_large_object_chunk_size`` and the maximum
+#   number of images that could be uploaded simultaneously by
+#   a given glance node.
+#
+# Possible values:
+#     * String value representing an absolute directory path
+#
+# Related options:
+#     * swift_buffer_on_upload
+#     * swift_store_large_object_chunk_size
+#
+#  (string value)
+#swift_upload_buffer_dir = <None>
+
+#
+# Address of the ESX/ESXi or vCenter Server target system.
+#
+# This configuration option sets the address of the ESX/ESXi or vCenter
+# Server target system. This option is required when using the VMware
+# storage backend. The address can contain an IP address (127.0.0.1) or
+# a DNS name (www.my-domain.com).
+#
+# Possible Values:
+#     * A valid IPv4 or IPv6 address
+#     * A valid DNS name
+#
+# Related options:
+#     * vmware_server_username
+#     * vmware_server_password
+#
+#  (host address value)
+#vmware_server_host = 127.0.0.1
+
+#
+# Server username.
+#
+# This configuration option takes the username for authenticating with
+# the VMware ESX/ESXi or vCenter Server. This option is required when
+# using the VMware storage backend.
+#
+# Possible Values:
+#     * Any string that is the username for a user with appropriate
+#       privileges
+#
+# Related options:
+#     * vmware_server_host
+#     * vmware_server_password
+#
+#  (string value)
+#vmware_server_username = root
+
+#
+# Server password.
+#
+# This configuration option takes the password for authenticating with
+# the VMware ESX/ESXi or vCenter Server. This option is required when
+# using the VMware storage backend.
+#
+# Possible Values:
+#     * Any string that is a password corresponding to the username
+#       specified using the "vmware_server_username" option
+#
+# Related options:
+#     * vmware_server_host
+#     * vmware_server_username
+#
+#  (string value)
+#vmware_server_password = vmware
+
+#
+# The number of VMware API retries.
+#
+# This configuration option specifies the number of times the VMware
+# ESX/VC server API must be retried upon connection related issues or
+# server API call overload. It is not possible to specify 'retry
+# forever'.
+#
+# Possible Values:
+#     * Any positive integer value
+#
+# Related options:
+#     * None
+#
+#  (integer value)
+# Minimum value: 1
+#vmware_api_retry_count = 10
+
+#
+# Interval in seconds used for polling remote tasks invoked on VMware
+# ESX/VC server.
+#
+# This configuration option takes in the sleep time in seconds for polling an
+# on-going async task as part of the VMWare ESX/VC server API call.
+#
+# Possible Values:
+#     * Any positive integer value
+#
+# Related options:
+#     * None
+#
+#  (integer value)
+# Minimum value: 1
+#vmware_task_poll_interval = 5
+
+#
+# The directory where the glance images will be stored in the datastore.
+#
+# This configuration option specifies the path to the directory where the
+# glance images will be stored in the VMware datastore. If this option
+# is not set,  the default directory where the glance images are stored
+# is openstack_glance.
+#
+# Possible Values:
+#     * Any string that is a valid path to a directory
+#
+# Related options:
+#     * None
+#
+#  (string value)
+#vmware_store_image_dir = /openstack_glance
+
+#
+# Set verification of the ESX/vCenter server certificate.
+#
+# This configuration option takes a boolean value to determine
+# whether or not to verify the ESX/vCenter server certificate. If this
+# option is set to True, the ESX/vCenter server certificate is not
+# verified. If this option is set to False, then the default CA
+# truststore is used for verification.
+#
+# This option is ignored if the "vmware_ca_file" option is set. In that
+# case, the ESX/vCenter server certificate will then be verified using
+# the file specified using the "vmware_ca_file" option .
+#
+# Possible Values:
+#     * True
+#     * False
+#
+# Related options:
+#     * vmware_ca_file
+#
+#  (boolean value)
+# Deprecated group/name - [glance_store]/vmware_api_insecure
+#vmware_insecure = false
+
+#
+# Absolute path to the CA bundle file.
+#
+# This configuration option enables the operator to use a custom
+# Cerificate Authority File to verify the ESX/vCenter certificate.
+#
+# If this option is set, the "vmware_insecure" option will be ignored
+# and the CA file specified will be used to authenticate the ESX/vCenter
+# server certificate and establish a secure connection to the server.
+#
+# Possible Values:
+#     * Any string that is a valid absolute path to a CA file
+#
+# Related options:
+#     * vmware_insecure
+#
+#  (string value)
+#vmware_ca_file = /etc/ssl/certs/ca-certificates.crt
+
+#
+# The datastores where the image can be stored.
+#
+# This configuration option specifies the datastores where the image can
+# be stored in the VMWare store backend. This option may be specified
+# multiple times for specifying multiple datastores. The datastore name
+# should be specified after its datacenter path, separated by ":". An
+# optional weight may be given after the datastore name, separated again
+# by ":" to specify the priority. Thus, the required format becomes
+# <datacenter_path>:<datastore_name>:<optional_weight>.
+#
+# When adding an image, the datastore with highest weight will be
+# selected, unless there is not enough free space available in cases
+# where the image size is already known. If no weight is given, it is
+# assumed to be zero and the directory will be considered for selection
+# last. If multiple datastores have the same weight, then the one with
+# the most free space available is selected.
+#
+# Possible Values:
+#     * Any string of the format:
+#       <datacenter_path>:<datastore_name>:<optional_weight>
+#
+# Related options:
+#    * None
+#
+#  (multi valued)
+#vmware_datastores =
+
+
+[oslo_concurrency]
+{%- if server.concurrency is defined %}
+{%- set _data = server.oslo_policy %}
+{%- include "oslo_templates/files/" ~ server.version ~ "/oslo/_concurrency.conf" %}
+{%- endif %}
+
+
+[oslo_policy]
+{%- if server.oslo_policy is defined %}
+{%- set _data = server.oslo_policy %}
+{%- include "oslo_templates/files/" ~ server.version ~ "/oslo/_policy.conf" %}
+{%- endif %}
diff --git a/glance/files/rocky/glance-scrubber.conf.RedHat b/glance/files/rocky/glance-scrubber.conf.RedHat
new file mode 120000
index 0000000..2fc1db1
--- /dev/null
+++ b/glance/files/rocky/glance-scrubber.conf.RedHat
@@ -0,0 +1 @@
+glance-scrubber.conf.Debian
\ No newline at end of file
diff --git a/glance/files/rocky/stores/_vmware.conf b/glance/files/rocky/stores/_vmware.conf
new file mode 100644
index 0000000..89c931a
--- /dev/null
+++ b/glance/files/rocky/stores/_vmware.conf
@@ -0,0 +1,211 @@
+
+#
+# Address of the ESX/ESXi or vCenter Server target system.
+#
+# This configuration option sets the address of the ESX/ESXi or vCenter
+# Server target system. This option is required when using the VMware
+# storage backend. The address can contain an IP address (127.0.0.1) or
+# a DNS name (www.my-domain.com).
+#
+# Possible Values:
+#     * A valid IPv4 or IPv6 address
+#     * A valid DNS name
+#
+# Related options:
+#     * vmware_server_username
+#     * vmware_server_password
+#
+#  (unknown value)
+#vmware_server_host = 127.0.0.1
+{%- if _data.server_host is defined %}
+vmware_server_host = {{ _data.server_host }}
+{%- endif %}
+
+#
+# Server username.
+#
+# This configuration option takes the username for authenticating with
+# the VMware ESX/ESXi or vCenter Server. This option is required when
+# using the VMware storage backend.
+#
+# Possible Values:
+#     * Any string that is the username for a user with appropriate
+#       privileges
+#
+# Related options:
+#     * vmware_server_host
+#     * vmware_server_password
+#
+#  (string value)
+#vmware_server_username = root
+vmware_server_username = {{ _data.server_username }}
+
+#
+# Server password.
+#
+# This configuration option takes the password for authenticating with
+# the VMware ESX/ESXi or vCenter Server. This option is required when
+# using the VMware storage backend.
+#
+# Possible Values:
+#     * Any string that is a password corresponding to the username
+#       specified using the "vmware_server_username" option
+#
+# Related options:
+#     * vmware_server_host
+#     * vmware_server_username
+#
+#  (string value)
+#vmware_server_password = vmware
+vmware_server_password = {{ _data.server_password }}
+
+#
+# The number of VMware API retries.
+#
+# This configuration option specifies the number of times the VMware
+# ESX/VC server API must be retried upon connection related issues or
+# server API call overload. It is not possible to specify 'retry
+# forever'.
+#
+# Possible Values:
+#     * Any positive integer value
+#
+# Related options:
+#     * None
+#
+#  (integer value)
+# Minimum value: 1
+#vmware_api_retry_count = 10
+{%- if _data.api_retry_count is defined %}
+vmware_api_retry_count = {{ _data.api_retry_count }}
+{%- endif %}
+
+#
+# Interval in seconds used for polling remote tasks invoked on VMware
+# ESX/VC server.
+#
+# This configuration option takes in the sleep time in seconds for polling an
+# on-going async task as part of the VMWare ESX/VC server API call.
+#
+# Possible Values:
+#     * Any positive integer value
+#
+# Related options:
+#     * None
+#
+#  (integer value)
+# Minimum value: 1
+#vmware_task_poll_interval = 5
+{%- if _data.task_poll_interval is defined %}
+vmware_task_poll_interval = {{ _data.task_poll_interval }}
+{%- endif %}
+
+#
+# The directory where the glance images will be stored in the datastore.
+#
+# This configuration option specifies the path to the directory where the
+# glance images will be stored in the VMware datastore. If this option
+# is not set,  the default directory where the glance images are stored
+# is openstack_glance.
+#
+# Possible Values:
+#     * Any string that is a valid path to a directory
+#
+# Related options:
+#     * None
+#
+#  (string value)
+#vmware_store_image_dir = /openstack_glance
+{%- if _data.store_image_dir is defined %}
+vmware_store_image_dir = {{ _data.store_image_dir }}
+{%- endif %}
+
+#
+# Set verification of the ESX/vCenter server certificate.
+#
+# This configuration option takes a boolean value to determine
+# whether or not to verify the ESX/vCenter server certificate. If this
+# option is set to True, the ESX/vCenter server certificate is not
+# verified. If this option is set to False, then the default CA
+# truststore is used for verification.
+#
+# This option is ignored if the "vmware_ca_file" option is set. In that
+# case, the ESX/vCenter server certificate will then be verified using
+# the file specified using the "vmware_ca_file" option .
+#
+# Possible Values:
+#     * True
+#     * False
+#
+# Related options:
+#     * vmware_ca_file
+#
+#  (boolean value)
+# Deprecated group/name - [glance_store]/vmware_api_insecure
+#vmware_insecure = false
+{%- if _data.insecure is defined %}
+vmware_insecure = {{ _data.insecure }}
+{%- endif %}
+
+#
+# Absolute path to the CA bundle file.
+#
+# This configuration option enables the operator to use a custom
+# Cerificate Authority File to verify the ESX/vCenter certificate.
+#
+# If this option is set, the "vmware_insecure" option will be ignored
+# and the CA file specified will be used to authenticate the ESX/vCenter
+# server certificate and establish a secure connection to the server.
+#
+# Possible Values:
+#     * Any string that is a valid absolute path to a CA file
+#
+# Related options:
+#     * vmware_insecure
+#
+#  (string value)
+#vmware_ca_file = /etc/ssl/certs/ca-certificates.crt
+{%- if _data.cacert_file is defined %}
+vmware_ca_file = {{ _data.cacert_file }}
+{%- endif %}
+
+#
+# The datastores where the image can be stored.
+#
+# This configuration option specifies the datastores where the image can
+# be stored in the VMWare store backend. This option may be specified
+# multiple times for specifying multiple datastores. The datastore name
+# should be specified after its datacenter path, separated by ":". An
+# optional weight may be given after the datastore name, separated again
+# by ":" to specify the priority. Thus, the required format becomes
+# <datacenter_path>:<datastore_name>:<optional_weight>.
+#
+# When adding an image, the datastore with highest weight will be
+# selected, unless there is not enough free space available in cases
+# where the image size is already known. If no weight is given, it is
+# assumed to be zero and the directory will be considered for selection
+# last. If multiple datastores have the same weight, then the one with
+# the most free space available is selected.
+#
+# Possible Values:
+#     * Any string of the format:
+#       <datacenter_path>:<datastore_name>:<optional_weight>
+#
+# Related options:
+#    * None
+#
+#  (multi valued)
+#vmware_datastores =
+{%- if _data.datastores is defined %}
+{%- for dname,ddata in _data.datastores.iteritems() %}
+{%- set vmware_datastores = [] %}
+{%- if ddata.get('enabled', False) %}
+{%- do vmware_datastores.append(ddata.path) %}
+{%- do vmware_datastores.append(ddata.get('name', dname)) %}
+{%- if ddata.weight is defined %}
+{%- do vmware_datastores.append(ddata.weight|string) %}
+{%- endif %}
+{%- endif %}
+vmware_datastores = {{ ':'.join(vmware_datastores) }}
+{%- endfor %}
+{%- endif %}