Change pike symlink to copy of ocata dir
This patch changes files/pike symlink to copy of files/ocata
Change-Id: I4c2d9dcb8eab2557294adc25627e7b85507358c2
diff --git a/ceilometer/files/pike b/ceilometer/files/pike
deleted file mode 120000
index d5e8ce2..0000000
--- a/ceilometer/files/pike
+++ /dev/null
@@ -1 +0,0 @@
-ocata
\ No newline at end of file
diff --git a/ceilometer/files/pike/ceilometer-agent.conf.Debian b/ceilometer/files/pike/ceilometer-agent.conf.Debian
new file mode 100644
index 0000000..b69c9d2
--- /dev/null
+++ b/ceilometer/files/pike/ceilometer-agent.conf.Debian
@@ -0,0 +1,2205 @@
+{%- from "ceilometer/map.jinja" import agent with context -%}
+[DEFAULT]
+
+#
+# From ceilometer
+#
+
+# To reduce polling agent load, samples are sent to the notification agent in a
+# batch. To gain higher throughput at the cost of load set this to False.
+# (boolean value)
+#batch_polled_samples = true
+
+# To reduce large requests at same time to Nova or other components from
+# different compute agents, shuffle start time of polling task. (integer value)
+#shuffle_time_before_polling_task = 0
+
+# Configuration file for WSGI definition of API. (string value)
+#api_paste_config = api_paste.ini
+
+# Inspector to use for inspecting the hypervisor layer. Known inspectors are
+# libvirt, hyperv, vsphere, xenapi and powervm. (string value)
+#hypervisor_inspector = libvirt
+
+# Libvirt domain type. (string value)
+# Allowed values: kvm, lxc, qemu, uml, xen
+#libvirt_type = kvm
+
+# Override the default libvirt URI (which is dependent on libvirt_type).
+# (string value)
+#libvirt_uri =
+
+# Dispatchers to process metering data. (multi valued)
+# Deprecated group/name - [DEFAULT]/dispatcher
+#meter_dispatchers =
+
+# Dispatchers to process event data. (multi valued)
+# Deprecated group/name - [DEFAULT]/dispatcher
+#event_dispatchers =
+
+# Exchange name for Ironic notifications. (string value)
+#ironic_exchange = ironic
+
+# Exchanges name to listen for notifications. (multi valued)
+#http_control_exchanges = nova
+#http_control_exchanges = glance
+#http_control_exchanges = neutron
+#http_control_exchanges = cinder
+
+# DEPRECATED: Allow novaclient's debug log output. (Use default_log_levels
+# instead) (boolean value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#nova_http_log_debug = false
+
+# Swift reseller prefix. Must be on par with reseller_prefix in proxy-
+# server.conf. (string value)
+#reseller_prefix = AUTH_
+
+# Configuration file for pipeline definition. (string value)
+#pipeline_cfg_file = pipeline.yaml
+
+# Configuration file for event pipeline definition. (string value)
+#event_pipeline_cfg_file = event_pipeline.yaml
+
+# Refresh Pipeline configuration on-the-fly. (boolean value)
+#refresh_pipeline_cfg = false
+
+# Refresh Event Pipeline configuration on-the-fly. (boolean value)
+#refresh_event_pipeline_cfg = false
+
+# Polling interval for pipeline file configuration in seconds. (integer value)
+#pipeline_polling_interval = 20
+
+# Source for samples emitted on this instance. (string value)
+#sample_source = openstack
+
+# List of metadata prefixes reserved for metering use. (list value)
+#reserved_metadata_namespace = metering.
+
+# Limit on length of reserved metadata values. (integer value)
+#reserved_metadata_length = 256
+
+# List of metadata keys reserved for metering use. And these keys are
+# additional to the ones included in the namespace. (list value)
+#reserved_metadata_keys =
+
+# Path to the rootwrap configuration file to use for running commands as root
+# (string value)
+#rootwrap_config = /etc/ceilometer/rootwrap.conf
+
+# Exchange name for Nova notifications. (string value)
+#nova_control_exchange = nova
+
+# Exchange name for Neutron notifications. (string value)
+#neutron_control_exchange = neutron
+
+# Exchange name for Heat notifications (string value)
+#heat_control_exchange = heat
+
+# Exchange name for Glance notifications. (string value)
+#glance_control_exchange = glance
+
+# Exchange name for Keystone notifications. (string value)
+#keystone_control_exchange = keystone
+
+# Exchange name for Cinder notifications. (string value)
+#cinder_control_exchange = cinder
+
+# Exchange name for Data Processing notifications. (string value)
+#sahara_control_exchange = sahara
+
+# Exchange name for Swift notifications. (string value)
+#swift_control_exchange = swift
+
+# Exchange name for Magnum notifications. (string value)
+#magnum_control_exchange = magnum
+
+# Exchange name for DBaaS notifications. (string value)
+#trove_control_exchange = trove
+
+# Exchange name for Messaging service notifications. (string value)
+#zaqar_control_exchange = zaqar
+
+# Exchange name for DNS service notifications. (string value)
+#dns_control_exchange = central
+
+# Exchange name for ceilometer notifications. (string value)
+#ceilometer_control_exchange = ceilometer
+
+# Name of this node, which must be valid in an AMQP key. Can be an opaque
+# identifier. For ZeroMQ only, must be a valid host name, FQDN, or IP address.
+# (string value)
+#host = <your_hostname>
+
+# Timeout seconds for HTTP requests. Set it to None to disable timeout.
+# (integer value)
+#http_timeout = 600
+
+#
+# From oslo.log
+#
+
+# If set to true, the logging level will be set to DEBUG instead of the default
+# INFO level. (boolean value)
+# Note: This option can be changed without restarting.
+#debug = false
+debug = false
+
+# DEPRECATED: If set to false, the logging level will be set to WARNING instead
+# of the default INFO level. (boolean value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#verbose = true
+
+# The name of a logging configuration file. This file is appended to any
+# existing logging configuration files. For details about logging configuration
+# files, see the Python logging module documentation. Note that when logging
+# configuration files are used then all logging configuration is set in the
+# configuration file and other logging configuration options are ignored (for
+# example, logging_context_format_string). (string value)
+# Note: This option can be changed without restarting.
+# Deprecated group/name - [DEFAULT]/log_config
+#log_config_append = <None>
+
+# Defines the format string for %%(asctime)s in log records. Default:
+# %(default)s . This option is ignored if log_config_append is set. (string
+# value)
+#log_date_format = %Y-%m-%d %H:%M:%S
+
+# (Optional) Name of log file to send logging output to. If no default is set,
+# logging will go to stderr as defined by use_stderr. This option is ignored if
+# log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logfile
+#log_file = <None>
+
+# (Optional) The base directory used for relative log_file paths. This option
+# is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logdir
+#log_dir = <None>
+
+# Uses logging handler designed to watch file system. When log file is moved or
+# removed this handler will open a new log file with specified path
+# instantaneously. It makes sense only if log_file option is specified and
+# Linux platform is used. This option is ignored if log_config_append is set.
+# (boolean value)
+#watch_log_file = false
+
+# Use syslog for logging. Existing syslog format is DEPRECATED and will be
+# changed later to honor RFC5424. This option is ignored if log_config_append
+# is set. (boolean value)
+#use_syslog = false
+
+# Syslog facility to receive log lines. This option is ignored if
+# log_config_append is set. (string value)
+#syslog_log_facility = LOG_USER
+
+# Log output to standard error. This option is ignored if log_config_append is
+# set. (boolean value)
+#use_stderr = false
+
+# Format string to use for log messages with context. (string value)
+#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
+
+# Format string to use for log messages when context is undefined. (string
+# value)
+#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
+
+# Additional data to append to log message when logging level for the message
+# is DEBUG. (string value)
+#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
+
+# Prefix each line of exception output with this format. (string value)
+#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
+
+# Defines the format string for %(user_identity)s that is used in
+# logging_context_format_string. (string value)
+#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
+
+# List of package logging levels in logger=LEVEL pairs. This option is ignored
+# if log_config_append is set. (list value)
+#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
+
+# Enables or disables publication of error events. (boolean value)
+#publish_errors = false
+
+# The format for an instance that is passed with the log message. (string
+# value)
+#instance_format = "[instance: %(uuid)s] "
+
+# The format for an instance UUID that is passed with the log message. (string
+# value)
+#instance_uuid_format = "[instance: %(uuid)s] "
+
+# Interval, number of seconds, of log rate limiting. (integer value)
+#rate_limit_interval = 0
+
+# Maximum number of logged messages per rate_limit_interval. (integer value)
+#rate_limit_burst = 0
+
+# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG
+# or empty string. Logs with level greater or equal to rate_limit_except_level
+# are not filtered. An empty string means that all levels are filtered. (string
+# value)
+#rate_limit_except_level = CRITICAL
+
+# Enables or disables fatal status of deprecations. (boolean value)
+#fatal_deprecations = false
+
+#
+# From oslo.messaging
+#
+
+# Size of RPC connection pool. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_conn_pool_size
+#rpc_conn_pool_size = 30
+
+# The pool size limit for connections expiration policy (integer value)
+#conn_pool_min_size = 2
+
+# The time-to-live in sec of idle connections in the pool (integer value)
+#conn_pool_ttl = 1200
+
+# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
+# The "host" option should point or resolve to this address. (string value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_bind_address
+#rpc_zmq_bind_address = *
+
+# MatchMaker driver. (string value)
+# Allowed values: redis, sentinel, dummy
+# Deprecated group/name - [DEFAULT]/rpc_zmq_matchmaker
+#rpc_zmq_matchmaker = redis
+
+# Number of ZeroMQ contexts, defaults to 1. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_contexts
+#rpc_zmq_contexts = 1
+
+# Maximum number of ingress messages to locally buffer per topic. Default is
+# unlimited. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_topic_backlog
+#rpc_zmq_topic_backlog = <None>
+
+# Directory for holding IPC sockets. (string value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_ipc_dir
+#rpc_zmq_ipc_dir = /var/run/openstack
+
+# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
+# "host" option, if running Nova. (string value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_host
+#rpc_zmq_host = localhost
+
+# Number of seconds to wait before all pending messages will be sent after
+# closing a socket. The default value of -1 specifies an infinite linger
+# period. The value of 0 specifies no linger period. Pending messages shall be
+# discarded immediately when the socket is closed. Positive values specify an
+# upper bound for the linger period. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
+#zmq_linger = -1
+
+# The default number of seconds that poll should wait. Poll raises timeout
+# exception when timeout expired. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_poll_timeout
+#rpc_poll_timeout = 1
+
+# Expiration timeout in seconds of a name service record about existing target
+# ( < 0 means no timeout). (integer value)
+# Deprecated group/name - [DEFAULT]/zmq_target_expire
+#zmq_target_expire = 300
+
+# Update period in seconds of a name service record about existing target.
+# (integer value)
+# Deprecated group/name - [DEFAULT]/zmq_target_update
+#zmq_target_update = 180
+
+# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
+# value)
+# Deprecated group/name - [DEFAULT]/use_pub_sub
+#use_pub_sub = false
+
+# Use ROUTER remote proxy. (boolean value)
+# Deprecated group/name - [DEFAULT]/use_router_proxy
+#use_router_proxy = false
+
+# This option makes direct connections dynamic or static. It makes sense only
+# with use_router_proxy=False which means to use direct connections for direct
+# message types (ignored otherwise). (boolean value)
+#use_dynamic_connections = false
+
+# How many additional connections to a host will be made for failover reasons.
+# This option is actual only in dynamic connections mode. (integer value)
+#zmq_failover_connections = 2
+
+# Minimal port number for random ports range. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+# Deprecated group/name - [DEFAULT]/rpc_zmq_min_port
+#rpc_zmq_min_port = 49153
+
+# Maximal port number for random ports range. (integer value)
+# Minimum value: 1
+# Maximum value: 65536
+# Deprecated group/name - [DEFAULT]/rpc_zmq_max_port
+#rpc_zmq_max_port = 65536
+
+# Number of retries to find free port number before fail with ZMQBindError.
+# (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_bind_port_retries
+#rpc_zmq_bind_port_retries = 100
+
+# Default serialization mechanism for serializing/deserializing
+# outgoing/incoming messages (string value)
+# Allowed values: json, msgpack
+# Deprecated group/name - [DEFAULT]/rpc_zmq_serialization
+#rpc_zmq_serialization = json
+
+# This option configures round-robin mode in zmq socket. True means not keeping
+# a queue when server side disconnects. False means to keep queue and messages
+# even if server is disconnected, when the server appears we send all
+# accumulated messages to it. (boolean value)
+#zmq_immediate = true
+
+# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
+# other negative value) means to skip any overrides and leave it to OS default;
+# 0 and 1 (or any other positive value) mean to disable and enable the option
+# respectively. (integer value)
+#zmq_tcp_keepalive = -1
+
+# The duration between two keepalive transmissions in idle condition. The unit
+# is platform dependent, for example, seconds in Linux, milliseconds in Windows
+# etc. The default value of -1 (or any other negative value and 0) means to
+# skip any overrides and leave it to OS default. (integer value)
+#zmq_tcp_keepalive_idle = -1
+
+# The number of retransmissions to be carried out before declaring that remote
+# end is not available. The default value of -1 (or any other negative value
+# and 0) means to skip any overrides and leave it to OS default. (integer
+# value)
+#zmq_tcp_keepalive_cnt = -1
+
+# The duration between two successive keepalive retransmissions, if
+# acknowledgement to the previous keepalive transmission is not received. The
+# unit is platform dependent, for example, seconds in Linux, milliseconds in
+# Windows etc. The default value of -1 (or any other negative value and 0)
+# means to skip any overrides and leave it to OS default. (integer value)
+#zmq_tcp_keepalive_intvl = -1
+
+# Maximum number of (green) threads to work concurrently. (integer value)
+#rpc_thread_pool_size = 100
+
+# Expiration timeout in seconds of a sent/received message after which it is
+# not tracked anymore by a client/server. (integer value)
+#rpc_message_ttl = 300
+
+# Wait for message acknowledgements from receivers. This mechanism works only
+# via proxy without PUB/SUB. (boolean value)
+#rpc_use_acks = false
+
+# Number of seconds to wait for an ack from a cast/call. After each retry
+# attempt this timeout is multiplied by some specified multiplier. (integer
+# value)
+#rpc_ack_timeout_base = 15
+
+# Number to multiply base ack timeout by after each retry attempt. (integer
+# value)
+#rpc_ack_timeout_multiplier = 2
+
+# Default number of message sending attempts in case of any problems occurred:
+# positive value N means at most N retries, 0 means no retries, None or -1 (or
+# any other negative values) mean to retry forever. This option is used only if
+# acknowledgments are enabled. (integer value)
+#rpc_retry_attempts = 3
+
+# List of publisher hosts SubConsumer can subscribe on. This option has higher
+# priority then the default publishers list taken from the matchmaker. (list
+# value)
+#subscribe_on =
+
+# Size of executor thread pool. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
+#executor_thread_pool_size = 64
+{%- if agent.message_queue.rpc_thread_pool_size is defined %}
+executor_thread_pool_size = {{ agent.message_queue.rpc_thread_pool_size }}
+{%- endif %}
+# Seconds to wait for a response from a call. (integer value)
+#rpc_response_timeout = 60
+
+# A URL representing the messaging driver to use and its full configuration.
+# (string value)
+#transport_url = <None>
+{%- if agent.message_queue.members is defined %}
+transport_url = rabbit://{% for member in agent.message_queue.members -%}
+ {{ agent.message_queue.user }}:{{ agent.message_queue.password }}@{{ member.host }}:{{ member.get('port', 5672) }}
+ {%- if not loop.last -%},{%- endif -%}
+ {%- endfor -%}
+ /{{ agent.message_queue.virtual_host }}
+{%- else %}
+transport_url = rabbit://{{ agent.message_queue.user }}:{{ agent.message_queue.password }}@{{ agent.message_queue.host }}:{{ agent.message_queue.port }}/{{ agent.message_queue.virtual_host }}
+{%- endif %}
+# DEPRECATED: The messaging driver to use, defaults to rabbit. Other drivers
+# include amqp and zmq. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rpc_backend = rabbit
+
+# The default exchange under which topics are scoped. May be overridden by an
+# exchange name specified in the transport_url option. (string value)
+#control_exchange = openstack
+
+#
+# From oslo.service.service
+#
+
+# Enable eventlet backdoor. Acceptable values are 0, <port>, and
+# <start>:<end>, where 0 results in listening on a random tcp port number;
+# <port> results in listening on the specified port number (and not enabling
+# backdoor if that port is in use); and <start>:<end> results in listening on
+# the smallest unused port number within the specified range of port numbers.
+# The chosen port is displayed in the service's log file. (string value)
+#backdoor_port = <None>
+
+# Enable eventlet backdoor, using the provided path as a unix socket that can
+# receive connections. This option is mutually exclusive with 'backdoor_port'
+# in that only one should be provided. If both are provided then the existence
+# of this option overrides the usage of that option. (string value)
+#backdoor_socket = <None>
+
+# Enables or disables logging values of all registered options when starting a
+# service (at DEBUG level). (boolean value)
+#log_options = true
+
+# Specify a timeout after which a gracefully shutdown server will exit. Zero
+# value means endless wait. (integer value)
+#graceful_shutdown_timeout = 60
+
+
+[api]
+
+#
+# From ceilometer
+#
+
+# Default maximum number of items returned by API request. (integer value)
+# Minimum value: 1
+#default_api_return_limit = 100
+
+# Set True to disable resource/meter/sample URLs. Default autodetection by
+# querying keystone. (boolean value)
+#gnocchi_is_enabled = <None>
+
+# Set True to redirect alarms URLs to aodh. Default autodetection by querying
+# keystone. (boolean value)
+#aodh_is_enabled = <None>
+
+# The endpoint of Aodh to redirect alarms URLs to Aodh API. Default
+# autodetection by querying keystone. (string value)
+#aodh_url = <None>
+
+# Set True to redirect events URLs to Panko. Default autodetection by querying
+# keystone. (boolean value)
+#panko_is_enabled = <None>
+
+# The endpoint of Panko to redirect events URLs to Panko API. Default
+# autodetection by querying keystone. (string value)
+#panko_url = <None>
+
+
+[collector]
+
+#
+# From ceilometer
+#
+
+# Address to which the UDP socket is bound. Set to an empty string to disable.
+# (string value)
+#udp_address = 0.0.0.0
+
+# Port to which the UDP socket is bound. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#udp_port = 4952
+
+# Number of notification messages to wait before dispatching them (integer
+# value)
+#batch_size = 1
+
+# Number of seconds to wait before dispatching samples when batch_size is not
+# reached (None means indefinitely) (integer value)
+#batch_timeout = <None>
+
+# Number of workers for collector service. default value is 1. (integer value)
+# Minimum value: 1
+# Deprecated group/name - [DEFAULT]/collector_workers
+#workers = 1
+
+
+[compute]
+
+#
+# From ceilometer
+#
+
+# DEPRECATED: Enable work-load partitioning, allowing multiple compute agents
+# to be run simultaneously. (replaced by instance_discovery_method) (boolean
+# value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#workload_partitioning = false
+
+# Ceilometer offers many methods to discover the instance running on a compute
+# node:
+# * naive: poll nova to get all instances
+# * workload_partitioning: poll nova to get instances of the compute
+# * libvirt_metadata: get instances from libvirt metadata but without
+# instance metadata (recommended for Gnocchi backend (string value)
+# Allowed values: naive, workload_partitioning, libvirt_metadata
+#instance_discovery_method = libvirt_metadata
+instance_discovery_method = {{ agent.get('discovery_method', 'libvirt_metadata') }}
+
+# New instances will be discovered periodically based on this option (in
+# seconds). By default, the agent discovers instances according to pipeline
+# polling interval. If option is greater than 0, the instance list to poll will
+# be updated based on this option's interval. Measurements relating to the
+# instances will match intervals defined in pipeline. (integer value)
+# Minimum value: 0
+#resource_update_interval = 0
+
+# The expiry to totally refresh the instances resource cache, since the
+# instance may be migrated to another host, we need to clean the legacy
+# instances info in local cache by totally refreshing the local cache. The
+# minimum should be the value of the config option of resource_update_interval.
+# This option is only used for agent polling to Nova API, so it will works only
+# when 'instance_discovery_method' was set to 'naive'. (integer value)
+# Minimum value: 0
+#resource_cache_expiry = 3600
+
+
+[coordination]
+
+#
+# From ceilometer
+#
+
+# The backend URL to use for distributed coordination. If left empty, per-
+# deployment central agent and per-host compute agent won't do workload
+# partitioning and will only function correctly if a single instance of that
+# service is running. (string value)
+#backend_url = <None>
+
+# Number of seconds between heartbeats for distributed coordination. (floating
+# point value)
+#heartbeat = 1.0
+
+# Number of seconds between checks to see if group membership has changed
+# (floating point value)
+#check_watchers = 10.0
+
+# Retry backoff factor when retrying to connect with coordination backend
+# (integer value)
+#retry_backoff = 1
+
+# Maximum number of seconds between retry to join partitioning group (integer
+# value)
+#max_retry_interval = 30
+
+
+[cors]
+
+#
+# From oslo.middleware.cors
+#
+
+# Indicate whether this resource may be shared with the domain received in the
+# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
+# slash. Example: https://horizon.example.com (list value)
+#allowed_origin = <None>
+
+# Indicate that the actual request can include user credentials (boolean value)
+#allow_credentials = true
+
+# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
+# Headers. (list value)
+#expose_headers = X-Auth-Token,X-Subject-Token,X-Service-Token,X-Openstack-Request-Id
+
+# Maximum cache age of CORS preflight requests. (integer value)
+#max_age = 3600
+
+# Indicate which methods can be used during the actual request. (list value)
+#allow_methods = GET,PUT,POST,DELETE,PATCH
+
+# Indicate which header field names may be used during the actual request.
+# (list value)
+#allow_headers = X-Auth-Token,X-Identity-Status,X-Roles,X-Service-Catalog,X-User-Id,X-Tenant-Id,X-Openstack-Request-Id
+
+
+[cors.subdomain]
+
+#
+# From oslo.middleware.cors
+#
+
+# Indicate whether this resource may be shared with the domain received in the
+# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
+# slash. Example: https://horizon.example.com (list value)
+#allowed_origin = <None>
+
+# Indicate that the actual request can include user credentials (boolean value)
+#allow_credentials = true
+
+# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
+# Headers. (list value)
+#expose_headers = X-Auth-Token,X-Subject-Token,X-Service-Token,X-Openstack-Request-Id
+
+# Maximum cache age of CORS preflight requests. (integer value)
+#max_age = 3600
+
+# Indicate which methods can be used during the actual request. (list value)
+#allow_methods = GET,PUT,POST,DELETE,PATCH
+
+# Indicate which header field names may be used during the actual request.
+# (list value)
+#allow_headers = X-Auth-Token,X-Identity-Status,X-Roles,X-Service-Catalog,X-User-Id,X-Tenant-Id,X-Openstack-Request-Id
+
+
+[database]
+
+#
+# From ceilometer
+#
+
+# Number of seconds that samples are kept in the database for (<= 0 means
+# forever). (integer value)
+# Deprecated group/name - [database]/time_to_live
+#metering_time_to_live = -1
+
+# The connection string used to connect to the metering database. (if unset,
+# connection is used) (string value)
+#metering_connection = <None>
+
+# Indicates if expirer expires only samples. If set true, expired samples will
+# be deleted, but residual resource and meter definition data will remain.
+# (boolean value)
+#sql_expire_samples_only = false
+
+#
+# From oslo.db
+#
+
+# DEPRECATED: The file name to use with SQLite. (string value)
+# Deprecated group/name - [DEFAULT]/sqlite_db
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Should use config option connection or slave_connection to connect
+# the database.
+#sqlite_db = oslo.sqlite
+
+# If True, SQLite uses synchronous mode. (boolean value)
+# Deprecated group/name - [DEFAULT]/sqlite_synchronous
+#sqlite_synchronous = true
+
+# The back end to use for the database. (string value)
+# Deprecated group/name - [DEFAULT]/db_backend
+#backend = sqlalchemy
+
+# The SQLAlchemy connection string to use to connect to the database. (string
+# value)
+# Deprecated group/name - [DEFAULT]/sql_connection
+# Deprecated group/name - [DATABASE]/sql_connection
+# Deprecated group/name - [sql]/connection
+#connection = <None>
+
+# The SQLAlchemy connection string to use to connect to the slave database.
+# (string value)
+#slave_connection = <None>
+
+# The SQL mode to be used for MySQL sessions. This option, including the
+# default, overrides any server-set SQL mode. To use whatever SQL mode is set
+# by the server configuration, set this to no value. Example: mysql_sql_mode=
+# (string value)
+#mysql_sql_mode = TRADITIONAL
+
+# Timeout before idle SQL connections are reaped. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_idle_timeout
+# Deprecated group/name - [DATABASE]/sql_idle_timeout
+# Deprecated group/name - [sql]/idle_timeout
+#idle_timeout = 3600
+
+# Minimum number of SQL connections to keep open in a pool. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_min_pool_size
+# Deprecated group/name - [DATABASE]/sql_min_pool_size
+#min_pool_size = 1
+
+# Maximum number of SQL connections to keep open in a pool. Setting a value of
+# 0 indicates no limit. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_max_pool_size
+# Deprecated group/name - [DATABASE]/sql_max_pool_size
+#max_pool_size = 5
+
+# Maximum number of database connection retries during startup. Set to -1 to
+# specify an infinite retry count. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_max_retries
+# Deprecated group/name - [DATABASE]/sql_max_retries
+#max_retries = 10
+
+# Interval between retries of opening a SQL connection. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_retry_interval
+# Deprecated group/name - [DATABASE]/reconnect_interval
+#retry_interval = 10
+
+# If set, use this value for max_overflow with SQLAlchemy. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_max_overflow
+# Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
+#max_overflow = 50
+
+# Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
+# value)
+# Minimum value: 0
+# Maximum value: 100
+# Deprecated group/name - [DEFAULT]/sql_connection_debug
+#connection_debug = 0
+
+# Add Python stack traces to SQL as comment strings. (boolean value)
+# Deprecated group/name - [DEFAULT]/sql_connection_trace
+#connection_trace = false
+
+# If set, use this value for pool_timeout with SQLAlchemy. (integer value)
+# Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
+#pool_timeout = <None>
+
+# Enable the experimental use of database reconnect on connection lost.
+# (boolean value)
+#use_db_reconnect = false
+
+# Seconds between retries of a database transaction. (integer value)
+#db_retry_interval = 1
+
+# If True, increases the interval between retries of a database operation up to
+# db_max_retry_interval. (boolean value)
+#db_inc_retry_interval = true
+
+# If db_inc_retry_interval is set, the maximum seconds between retries of a
+# database operation. (integer value)
+#db_max_retry_interval = 10
+
+# Maximum retries in case of connection error or deadlock error before error is
+# raised. Set to -1 to specify an infinite retry count. (integer value)
+#db_max_retries = 20
+
+
+[dispatcher_file]
+
+#
+# From ceilometer
+#
+
+# Name and the location of the file to record meters. (string value)
+#file_path = <None>
+
+# The max size of the file. (integer value)
+#max_bytes = 0
+
+# The max number of the files to keep. (integer value)
+#backup_count = 0
+
+
+[dispatcher_gnocchi]
+
+#
+# From ceilometer
+#
+
+# Filter out samples generated by Gnocchi service activity (boolean value)
+#filter_service_activity = true
+
+# Gnocchi project used to filter out samples generated by Gnocchi service
+# activity (string value)
+#filter_project = gnocchi
+
+# The archive policy to use when the dispatcher create a new metric. (string
+# value)
+#archive_policy = <None>
+
+# The Yaml file that defines mapping between samples and gnocchi
+# resources/metrics (string value)
+#resources_definition_file = gnocchi_resources.yaml
+
+
+[dispatcher_http]
+
+#
+# From ceilometer
+#
+
+# The target where the http request will be sent. If this is not set, no data
+# will be posted. For example: target = http://hostname:1234/path (string
+# value)
+#target =
+
+# The target for event data where the http request will be sent to. If this is
+# not set, it will default to same as Sample target. (string value)
+#event_target = <None>
+
+# The max time in seconds to wait for a request to timeout. (integer value)
+#timeout = 5
+
+# The path to a server certificate or directory if the system CAs are not used
+# or if a self-signed certificate is used. Set to False to ignore SSL cert
+# verification. (string value)
+#verify_ssl = <None>
+
+# Indicates whether samples are published in a batch. (boolean value)
+#batch_mode = false
+
+
+[event]
+
+#
+# From ceilometer
+#
+
+# Configuration file for event definitions. (string value)
+#definitions_cfg_file = event_definitions.yaml
+
+# Drop notifications if no event definition matches. (Otherwise, we convert
+# them with just the default traits) (boolean value)
+#drop_unmatched_notifications = false
+
+# Store the raw notification for select priority levels (info and/or error). By
+# default, raw details are not captured. (multi valued)
+#store_raw =
+
+
+[hardware]
+
+#
+# From ceilometer
+#
+
+# URL scheme to use for hardware nodes. (string value)
+#url_scheme = snmp://
+
+# SNMPd user name of all nodes running in the cloud. (string value)
+#readonly_user_name = ro_snmp_user
+
+# SNMPd v3 authentication password of all the nodes running in the cloud.
+# (string value)
+#readonly_user_password = password
+
+# SNMPd v3 authentication algorithm of all the nodes running in the cloud
+# (string value)
+# Allowed values: md5, sha
+#readonly_user_auth_proto = <None>
+
+# SNMPd v3 encryption algorithm of all the nodes running in the cloud (string
+# value)
+# Allowed values: des, aes128, 3des, aes192, aes256
+#readonly_user_priv_proto = <None>
+
+# SNMPd v3 encryption password of all the nodes running in the cloud. (string
+# value)
+#readonly_user_priv_password = <None>
+
+# Name of the control plane Tripleo network (string value)
+#tripleo_network_name = ctlplane
+
+# Configuration file for defining hardware snmp meters. (string value)
+#meter_definitions_file = snmp.yaml
+
+
+[ipmi]
+
+#
+# From ceilometer
+#
+
+# Number of retries upon Intel Node Manager initialization failure (integer
+# value)
+#node_manager_init_retry = 3
+
+# Tolerance of IPMI/NM polling failures before disable this pollster. Negative
+# indicates retrying forever. (integer value)
+#polling_retry = 3
+
+
+[keystone_authtoken]
+
+#
+# From keystonemiddleware.auth_token
+#
+
+auth_type = password
+user_domain_id = {{ agent.identity.get('domain', 'default') }}
+project_domain_id = {{ agent.identity.get('domain', 'default') }}
+project_name = {{ agent.identity.tenant }}
+username = {{ agent.identity.user }}
+password = {{ agent.identity.password }}
+auth_uri = http://{{ agent.identity.host }}:5000
+auth_url = http://{{ agent.identity.host }}:35357
+interface = internal
+
+{%- if agent.cache is defined %}
+memcached_agents = {%- for member in agent.cache.members %}{{ member.host }}:{{ member.get('port', '11211') }}{% if not loop.last %},{% endif %}{%- endfor %}
+{%- else %}
+token_cache_time = -1
+{%- endif %}
+
+# Complete "public" Identity API endpoint. This endpoint should not be an
+# "admin" endpoint, as it should be accessible by all end users.
+# Unauthenticated clients are redirected to this endpoint to authenticate.
+# Although this endpoint should ideally be unversioned, client support in the
+# wild varies. If you're using a versioned v2 endpoint here, then this should
+# *not* be the same endpoint the service user utilizes for validating tokens,
+# because normal end users may not be able to reach that endpoint. (string
+# value)
+#auth_uri = <None>
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+# Do not handle authorization requests within the middleware, but delegate the
+# authorization decision to downstream WSGI components. (boolean value)
+#delay_auth_decision = false
+
+# Request timeout value for communicating with Identity API server. (integer
+# value)
+#http_connect_timeout = <None>
+
+# How many times are we trying to reconnect when communicating with Identity
+# API Server. (integer value)
+#http_request_max_retries = 3
+
+# Request environment key where the Swift cache object is stored. When
+# auth_token middleware is deployed with a Swift cache, use this option to have
+# the middleware share a caching backend with swift. Otherwise, use the
+# ``memcached_servers`` option instead. (string value)
+#cache = <None>
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# The region in which the identity server can be found. (string value)
+#region_name = <None>
+
+# DEPRECATED: Directory used to cache files related to PKI tokens. This option
+# has been deprecated in the Ocata release and will be removed in the P
+# release. (string value)
+# This option is deprecated for removal since Ocata.
+# Its value may be silently ignored in the future.
+# Reason: PKI token format is no longer supported.
+#signing_dir = <None>
+
+# Optionally specify a list of memcached server(s) to use for caching. If left
+# undefined, tokens will instead be cached in-process. (list value)
+# Deprecated group/name - [keystone_authtoken]/memcache_servers
+#memcached_servers = <None>
+
+# In order to prevent excessive effort spent validating tokens, the middleware
+# caches previously-seen tokens for a configurable duration (in seconds). Set
+# to -1 to disable caching completely. (integer value)
+#token_cache_time = 300
+
+# DEPRECATED: Determines the frequency at which the list of revoked tokens is
+# retrieved from the Identity service (in seconds). A high number of revocation
+# events combined with a low cache duration may significantly reduce
+# performance. Only valid for PKI tokens. This option has been deprecated in
+# the Ocata release and will be removed in the P release. (integer value)
+# This option is deprecated for removal since Ocata.
+# Its value may be silently ignored in the future.
+# Reason: PKI token format is no longer supported.
+#revocation_cache_time = 10
+
+# (Optional) If defined, indicate whether token data should be authenticated or
+# authenticated and encrypted. If MAC, token data is authenticated (with HMAC)
+# in the cache. If ENCRYPT, token data is encrypted and authenticated in the
+# cache. If the value is not one of these options or empty, auth_token will
+# raise an exception on initialization. (string value)
+# Allowed values: None, MAC, ENCRYPT
+#memcache_security_strategy = None
+
+# (Optional, mandatory if memcache_security_strategy is defined) This string is
+# used for key derivation. (string value)
+#memcache_secret_key = <None>
+
+# (Optional) Number of seconds memcached server is considered dead before it is
+# tried again. (integer value)
+#memcache_pool_dead_retry = 300
+
+# (Optional) Maximum total number of open connections to every memcached
+# server. (integer value)
+#memcache_pool_maxsize = 10
+
+# (Optional) Socket timeout in seconds for communicating with a memcached
+# server. (integer value)
+#memcache_pool_socket_timeout = 3
+
+# (Optional) Number of seconds a connection to memcached is held unused in the
+# pool before it is closed. (integer value)
+#memcache_pool_unused_timeout = 60
+
+# (Optional) Number of seconds that an operation will wait to get a memcached
+# client connection from the pool. (integer value)
+#memcache_pool_conn_get_timeout = 10
+
+# (Optional) Use the advanced (eventlet safe) memcached client pool. The
+# advanced pool will only work under python 2.x. (boolean value)
+#memcache_use_advanced_pool = false
+
+# (Optional) Indicate whether to set the X-Service-Catalog header. If False,
+# middleware will not ask for service catalog on token validation and will not
+# set the X-Service-Catalog header. (boolean value)
+#include_service_catalog = true
+
+# Used to control the use and type of token binding. Can be set to: "disabled"
+# to not check token binding. "permissive" (default) to validate binding
+# information if the bind type is of a form known to the server and ignore it
+# if not. "strict" like "permissive" but if the bind type is unknown the token
+# will be rejected. "required" any form of token binding is needed to be
+# allowed. Finally the name of a binding method that must be present in tokens.
+# (string value)
+#enforce_token_bind = permissive
+
+# DEPRECATED: If true, the revocation list will be checked for cached tokens.
+# This requires that PKI tokens are configured on the identity server. (boolean
+# value)
+# This option is deprecated for removal since Ocata.
+# Its value may be silently ignored in the future.
+# Reason: PKI token format is no longer supported.
+#check_revocations_for_cached = false
+
+# DEPRECATED: Hash algorithms to use for hashing PKI tokens. This may be a
+# single algorithm or multiple. The algorithms are those supported by Python
+# standard hashlib.new(). The hashes will be tried in the order given, so put
+# the preferred one first for performance. The result of the first hash will be
+# stored in the cache. This will typically be set to multiple values only while
+# migrating from a less secure algorithm to a more secure one. Once all the old
+# tokens are expired this option should be set to a single value for better
+# performance. (list value)
+# This option is deprecated for removal since Ocata.
+# Its value may be silently ignored in the future.
+# Reason: PKI token format is no longer supported.
+#hash_algorithms = md5
+
+# A choice of roles that must be present in a service token. Service tokens are
+# allowed to request that an expired token can be used and so this check should
+# tightly control that only actual services should be sending this token. Roles
+# here are applied as an ANY check so any role in this list must be present.
+# For backwards compatibility reasons this currently only affects the
+# allow_expired check. (list value)
+#service_token_roles = service
+
+# For backwards compatibility reasons we must let valid service tokens pass
+# that don't pass the service_token_roles check as valid. Setting this true
+# will become the default in a future release and should be enabled if
+# possible. (boolean value)
+#service_token_roles_required = false
+
+# Authentication type to load (string value)
+# Deprecated group/name - [keystone_authtoken]/auth_plugin
+#auth_type = <None>
+
+# Config Section from which to load plugin specific options (string value)
+#auth_section = <None>
+
+
+[matchmaker_redis]
+
+#
+# From oslo.messaging
+#
+
+# DEPRECATED: Host to locate redis. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#host = 127.0.0.1
+
+# DEPRECATED: Use this port to connect to redis host. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#port = 6379
+
+# DEPRECATED: Password for Redis server (optional). (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#password =
+
+# DEPRECATED: List of Redis Sentinel hosts (fault tolerance mode), e.g.,
+# [host:port, host1:port ... ] (list value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#sentinel_hosts =
+
+# Redis replica set name. (string value)
+#sentinel_group_name = oslo-messaging-zeromq
+
+# Time in ms to wait between connection attempts. (integer value)
+#wait_timeout = 2000
+
+# Time in ms to wait before the transaction is killed. (integer value)
+#check_timeout = 20000
+
+# Timeout in ms on blocking socket operations. (integer value)
+#socket_timeout = 10000
+
+
+[meter]
+
+#
+# From ceilometer
+#
+
+# Configuration file for defining meter notifications. (string value)
+#meter_definitions_cfg_file = meters.yaml
+
+
+[notification]
+
+#
+# From ceilometer
+#
+
+# Number of queues to parallelize workload across. This value should be larger
+# than the number of active notification agents for optimal results. WARNING:
+# Once set, lowering this value may result in lost data. (integer value)
+# Minimum value: 1
+#pipeline_processing_queues = 10
+
+# Acknowledge message when event persistence fails. (boolean value)
+# Deprecated group/name - [collector]/ack_on_event_error
+#ack_on_event_error = true
+
+# Enable workload partitioning, allowing multiple notification agents to be run
+# simultaneously. (boolean value)
+#workload_partitioning = false
+
+# Messaging URLs to listen for notifications. Example:
+# rabbit://user:pass@host1:port1[,user:pass@hostN:portN]/virtual_host
+# (DEFAULT/transport_url is used if empty). This is useful when you have
+# dedicate messaging nodes for each service, for example, all nova
+# notifications go to rabbit-nova:5672, while all cinder notifications go to
+# rabbit-cinder:5672. (multi valued)
+#messaging_urls =
+
+# Number of notification messages to wait before publishing them. Batching is
+# advised when transformations are applied in pipeline. (integer value)
+# Minimum value: 1
+#batch_size = 100
+
+# Number of seconds to wait before publishing samples when batch_size is not
+# reached (None means indefinitely) (integer value)
+#batch_timeout = 5
+
+# Number of workers for notification service, default value is 1. (integer
+# value)
+# Minimum value: 1
+# Deprecated group/name - [DEFAULT]/notification_workers
+#workers = 1
+
+
+[oslo_concurrency]
+
+#
+# From oslo.concurrency
+#
+
+# Enables or disables inter-process locks. (boolean value)
+# Deprecated group/name - [DEFAULT]/disable_process_locking
+#disable_process_locking = false
+
+# Directory to use for lock files. For security, the specified directory
+# should only be writable by the user running the processes that need locking.
+# Defaults to environment variable OSLO_LOCK_PATH. If external locks are used,
+# a lock path must be set. (string value)
+# Deprecated group/name - [DEFAULT]/lock_path
+#lock_path = <None>
+
+
+[oslo_messaging_amqp]
+
+#
+# From oslo.messaging
+#
+
+# Name for the AMQP container. must be globally unique. Defaults to a generated
+# UUID (string value)
+# Deprecated group/name - [amqp1]/container_name
+#container_name = <None>
+
+# Timeout for inactive connections (in seconds) (integer value)
+# Deprecated group/name - [amqp1]/idle_timeout
+#idle_timeout = 0
+
+# Debug: dump AMQP frames to stdout (boolean value)
+# Deprecated group/name - [amqp1]/trace
+#trace = false
+
+# CA certificate PEM file used to verify the server's certificate (string
+# value)
+# Deprecated group/name - [amqp1]/ssl_ca_file
+#ssl_ca_file =
+
+# Self-identifying certificate PEM file for client authentication (string
+# value)
+# Deprecated group/name - [amqp1]/ssl_cert_file
+#ssl_cert_file =
+
+# Private key PEM file used to sign ssl_cert_file certificate (optional)
+# (string value)
+# Deprecated group/name - [amqp1]/ssl_key_file
+#ssl_key_file =
+
+# Password for decrypting ssl_key_file (if encrypted) (string value)
+# Deprecated group/name - [amqp1]/ssl_key_password
+#ssl_key_password = <None>
+
+# DEPRECATED: Accept clients using either SSL or plain TCP (boolean value)
+# Deprecated group/name - [amqp1]/allow_insecure_clients
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Not applicable - not a SSL server
+#allow_insecure_clients = false
+
+# Space separated list of acceptable SASL mechanisms (string value)
+# Deprecated group/name - [amqp1]/sasl_mechanisms
+#sasl_mechanisms =
+
+# Path to directory that contains the SASL configuration (string value)
+# Deprecated group/name - [amqp1]/sasl_config_dir
+#sasl_config_dir =
+
+# Name of configuration file (without .conf suffix) (string value)
+# Deprecated group/name - [amqp1]/sasl_config_name
+#sasl_config_name =
+
+# User name for message broker authentication (string value)
+# Deprecated group/name - [amqp1]/username
+#username =
+
+# Password for message broker authentication (string value)
+# Deprecated group/name - [amqp1]/password
+#password =
+
+# Seconds to pause before attempting to re-connect. (integer value)
+# Minimum value: 1
+#connection_retry_interval = 1
+
+# Increase the connection_retry_interval by this many seconds after each
+# unsuccessful failover attempt. (integer value)
+# Minimum value: 0
+#connection_retry_backoff = 2
+
+# Maximum limit for connection_retry_interval + connection_retry_backoff
+# (integer value)
+# Minimum value: 1
+#connection_retry_interval_max = 30
+
+# Time to pause between re-connecting an AMQP 1.0 link that failed due to a
+# recoverable error. (integer value)
+# Minimum value: 1
+#link_retry_delay = 10
+
+# The maximum number of attempts to re-send a reply message which failed due to
+# a recoverable error. (integer value)
+# Minimum value: -1
+#default_reply_retry = 0
+
+# The deadline for an rpc reply message delivery. (integer value)
+# Minimum value: 5
+#default_reply_timeout = 30
+
+# The deadline for an rpc cast or call message delivery. Only used when caller
+# does not provide a timeout expiry. (integer value)
+# Minimum value: 5
+#default_send_timeout = 30
+
+# The deadline for a sent notification message delivery. Only used when caller
+# does not provide a timeout expiry. (integer value)
+# Minimum value: 5
+#default_notify_timeout = 30
+
+# The duration to schedule a purge of idle sender links. Detach link after
+# expiry. (integer value)
+# Minimum value: 1
+#default_sender_link_timeout = 600
+
+# Indicates the addressing mode used by the driver.
+# Permitted values:
+# 'legacy' - use legacy non-routable addressing
+# 'routable' - use routable addresses
+# 'dynamic' - use legacy addresses if the message bus does not support routing
+# otherwise use routable addressing (string value)
+#addressing_mode = dynamic
+
+# address prefix used when sending to a specific server (string value)
+# Deprecated group/name - [amqp1]/server_request_prefix
+#server_request_prefix = exclusive
+
+# address prefix used when broadcasting to all servers (string value)
+# Deprecated group/name - [amqp1]/broadcast_prefix
+#broadcast_prefix = broadcast
+
+# address prefix when sending to any server in group (string value)
+# Deprecated group/name - [amqp1]/group_request_prefix
+#group_request_prefix = unicast
+
+# Address prefix for all generated RPC addresses (string value)
+#rpc_address_prefix = openstack.org/om/rpc
+
+# Address prefix for all generated Notification addresses (string value)
+#notify_address_prefix = openstack.org/om/notify
+
+# Appended to the address prefix when sending a fanout message. Used by the
+# message bus to identify fanout messages. (string value)
+#multicast_address = multicast
+
+# Appended to the address prefix when sending to a particular RPC/Notification
+# server. Used by the message bus to identify messages sent to a single
+# destination. (string value)
+#unicast_address = unicast
+
+# Appended to the address prefix when sending to a group of consumers. Used by
+# the message bus to identify messages that should be delivered in a round-
+# robin fashion across consumers. (string value)
+#anycast_address = anycast
+
+# Exchange name used in notification addresses.
+# Exchange name resolution precedence:
+# Target.exchange if set
+# else default_notification_exchange if set
+# else control_exchange if set
+# else 'notify' (string value)
+#default_notification_exchange = <None>
+
+# Exchange name used in RPC addresses.
+# Exchange name resolution precedence:
+# Target.exchange if set
+# else default_rpc_exchange if set
+# else control_exchange if set
+# else 'rpc' (string value)
+#default_rpc_exchange = <None>
+
+# Window size for incoming RPC Reply messages. (integer value)
+# Minimum value: 1
+#reply_link_credit = 200
+
+# Window size for incoming RPC Request messages (integer value)
+# Minimum value: 1
+#rpc_server_credit = 100
+
+# Window size for incoming Notification messages (integer value)
+# Minimum value: 1
+#notify_server_credit = 100
+
+# Send messages of this type pre-settled.
+# Pre-settled messages will not receive acknowledgement
+# from the peer. Note well: pre-settled messages may be
+# silently discarded if the delivery fails.
+# Permitted values:
+# 'rpc-call' - send RPC Calls pre-settled
+# 'rpc-reply'- send RPC Replies pre-settled
+# 'rpc-cast' - Send RPC Casts pre-settled
+# 'notify' - Send Notifications pre-settled
+# (multi valued)
+#pre_settled = rpc-cast
+#pre_settled = rpc-reply
+
+
+[oslo_messaging_kafka]
+
+#
+# From oslo.messaging
+#
+
+# DEPRECATED: Default Kafka broker Host (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#kafka_default_host = localhost
+
+# DEPRECATED: Default Kafka broker Port (port value)
+# Minimum value: 0
+# Maximum value: 65535
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#kafka_default_port = 9092
+
+# Max fetch bytes of Kafka consumer (integer value)
+#kafka_max_fetch_bytes = 1048576
+
+# Default timeout(s) for Kafka consumers (integer value)
+#kafka_consumer_timeout = 1.0
+
+# Pool Size for Kafka Consumers (integer value)
+#pool_size = 10
+
+# The pool size limit for connections expiration policy (integer value)
+#conn_pool_min_size = 2
+
+# The time-to-live in sec of idle connections in the pool (integer value)
+#conn_pool_ttl = 1200
+
+# Group id for Kafka consumer. Consumers in one group will coordinate message
+# consumption (string value)
+#consumer_group = oslo_messaging_consumer
+
+# Upper bound on the delay for KafkaProducer batching in seconds (floating
+# point value)
+#producer_batch_timeout = 0.0
+
+# Size of batch for the producer async send (integer value)
+#producer_batch_size = 16384
+
+
+[oslo_messaging_notifications]
+
+#
+# From oslo.messaging
+#
+
+# The Drivers(s) to handle sending notifications. Possible values are
+# messaging, messagingv2, routing, log, test, noop (multi valued)
+# Deprecated group/name - [DEFAULT]/notification_driver
+#driver =
+
+# A URL representing the messaging driver to use for notifications. If not set,
+# we fall back to the same configuration used for RPC. (string value)
+# Deprecated group/name - [DEFAULT]/notification_transport_url
+#transport_url = <None>
+
+# AMQP topic used for OpenStack notifications. (list value)
+# Deprecated group/name - [rpc_notifier2]/topics
+# Deprecated group/name - [DEFAULT]/notification_topics
+#topics = notifications
+topics = notifications
+
+
+[oslo_messaging_rabbit]
+
+#
+# From oslo.messaging
+#
+
+# Use durable queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/amqp_durable_queues
+# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
+#amqp_durable_queues = false
+
+# Auto-delete queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/amqp_auto_delete
+#amqp_auto_delete = false
+
+# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
+# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
+# distributions. (string value)
+# Deprecated group/name - [DEFAULT]/kombu_ssl_version
+#kombu_ssl_version =
+
+# SSL key file (valid only if SSL enabled). (string value)
+# Deprecated group/name - [DEFAULT]/kombu_ssl_keyfile
+#kombu_ssl_keyfile =
+
+# SSL cert file (valid only if SSL enabled). (string value)
+# Deprecated group/name - [DEFAULT]/kombu_ssl_certfile
+#kombu_ssl_certfile =
+
+# SSL certification authority file (valid only if SSL enabled). (string value)
+# Deprecated group/name - [DEFAULT]/kombu_ssl_ca_certs
+#kombu_ssl_ca_certs =
+
+# How long to wait before reconnecting in response to an AMQP consumer cancel
+# notification. (floating point value)
+# Deprecated group/name - [DEFAULT]/kombu_reconnect_delay
+#kombu_reconnect_delay = 1.0
+
+# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not
+# be used. This option may not be available in future versions. (string value)
+#kombu_compression = <None>
+
+# How long to wait a missing client before abandoning to send it its replies.
+# This value should not be longer than rpc_response_timeout. (integer value)
+# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
+#kombu_missing_consumer_retry_timeout = 60
+
+# Determines how the next RabbitMQ node is chosen in case the one we are
+# currently connected to becomes unavailable. Takes effect only if more than
+# one RabbitMQ node is provided in config. (string value)
+# Allowed values: round-robin, shuffle
+#kombu_failover_strategy = round-robin
+
+# DEPRECATED: The RabbitMQ broker address where a single node is used. (string
+# value)
+# Deprecated group/name - [DEFAULT]/rabbit_host
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_host = localhost
+
+# DEPRECATED: The RabbitMQ broker port where a single node is used. (port
+# value)
+# Minimum value: 0
+# Maximum value: 65535
+# Deprecated group/name - [DEFAULT]/rabbit_port
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_port = 5672
+
+# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
+# Deprecated group/name - [DEFAULT]/rabbit_hosts
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_hosts = $rabbit_host:$rabbit_port
+
+# Connect over SSL for RabbitMQ. (boolean value)
+# Deprecated group/name - [DEFAULT]/rabbit_use_ssl
+#rabbit_use_ssl = false
+
+# DEPRECATED: The RabbitMQ userid. (string value)
+# Deprecated group/name - [DEFAULT]/rabbit_userid
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_userid = guest
+
+# DEPRECATED: The RabbitMQ password. (string value)
+# Deprecated group/name - [DEFAULT]/rabbit_password
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_password = guest
+
+# The RabbitMQ login method. (string value)
+# Allowed values: PLAIN, AMQPLAIN, RABBIT-CR-DEMO
+# Deprecated group/name - [DEFAULT]/rabbit_login_method
+#rabbit_login_method = AMQPLAIN
+
+# DEPRECATED: The RabbitMQ virtual host. (string value)
+# Deprecated group/name - [DEFAULT]/rabbit_virtual_host
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_virtual_host = /
+
+# How frequently to retry connecting with RabbitMQ. (integer value)
+#rabbit_retry_interval = 1
+
+# How long to backoff for between retries when connecting to RabbitMQ. (integer
+# value)
+# Deprecated group/name - [DEFAULT]/rabbit_retry_backoff
+#rabbit_retry_backoff = 2
+
+# Maximum interval of RabbitMQ connection retries. Default is 30 seconds.
+# (integer value)
+#rabbit_interval_max = 30
+
+# DEPRECATED: Maximum number of RabbitMQ connection retries. Default is 0
+# (infinite retry count). (integer value)
+# Deprecated group/name - [DEFAULT]/rabbit_max_retries
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#rabbit_max_retries = 0
+
+# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this
+# option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring
+# is no longer controlled by the x-ha-policy argument when declaring a queue.
+# If you just want to make sure that all queues (except those with auto-
+# generated names) are mirrored across all nodes, run: "rabbitmqctl set_policy
+# HA '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value)
+# Deprecated group/name - [DEFAULT]/rabbit_ha_queues
+#rabbit_ha_queues = false
+
+# Positive integer representing duration in seconds for queue TTL (x-expires).
+# Queues which are unused for the duration of the TTL are automatically
+# deleted. The parameter affects only reply and fanout queues. (integer value)
+# Minimum value: 1
+#rabbit_transient_queues_ttl = 1800
+
+# Specifies the number of messages to prefetch. Setting to zero allows
+# unlimited messages. (integer value)
+#rabbit_qos_prefetch_count = 64
+
+# Number of seconds after which the Rabbit broker is considered down if
+# heartbeat's keep-alive fails (0 disable the heartbeat). EXPERIMENTAL (integer
+# value)
+#heartbeat_timeout_threshold = 60
+
+# How often times during the heartbeat_timeout_threshold we check the
+# heartbeat. (integer value)
+#heartbeat_rate = 2
+
+# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake (boolean value)
+# Deprecated group/name - [DEFAULT]/fake_rabbit
+#fake_rabbit = false
+
+# Maximum number of channels to allow (integer value)
+#channel_max = <None>
+
+# The maximum byte size for an AMQP frame (integer value)
+#frame_max = <None>
+
+# How often to send heartbeats for consumer's connections (integer value)
+#heartbeat_interval = 3
+
+# Enable SSL (boolean value)
+#ssl = <None>
+
+# Arguments passed to ssl.wrap_socket (dict value)
+#ssl_options = <None>
+
+# Set socket timeout in seconds for connection's socket (floating point value)
+#socket_timeout = 0.25
+
+# Set TCP_USER_TIMEOUT in seconds for connection's socket (floating point
+# value)
+#tcp_user_timeout = 0.25
+
+# Set delay for reconnection to some host which has connection error (floating
+# point value)
+#host_connection_reconnect_delay = 0.25
+
+# Connection factory implementation (string value)
+# Allowed values: new, single, read_write
+#connection_factory = single
+
+# Maximum number of connections to keep queued. (integer value)
+#pool_max_size = 30
+
+# Maximum number of connections to create above `pool_max_size`. (integer
+# value)
+#pool_max_overflow = 0
+
+# Default number of seconds to wait for a connections to available (integer
+# value)
+#pool_timeout = 30
+
+# Lifetime of a connection (since creation) in seconds or None for no
+# recycling. Expired connections are closed on acquire. (integer value)
+#pool_recycle = 600
+
+# Threshold at which inactive (since release) connections are considered stale
+# in seconds or None for no staleness. Stale connections are closed on acquire.
+# (integer value)
+#pool_stale = 60
+
+# Default serialization mechanism for serializing/deserializing
+# outgoing/incoming messages (string value)
+# Allowed values: json, msgpack
+#default_serializer_type = json
+
+# Persist notification messages. (boolean value)
+#notification_persistence = false
+
+# Exchange name for sending notifications (string value)
+#default_notification_exchange = ${control_exchange}_notification
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# notification listener. (integer value)
+#notification_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during sending
+# notification, -1 means infinite retry. (integer value)
+#default_notification_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during sending
+# notification message (floating point value)
+#notification_retry_delay = 0.25
+
+# Time to live for rpc queues without consumers in seconds. (integer value)
+#rpc_queue_expiration = 60
+
+# Exchange name for sending RPC messages (string value)
+#default_rpc_exchange = ${control_exchange}_rpc
+
+# Exchange name for receiving RPC replies (string value)
+#rpc_reply_exchange = ${control_exchange}_rpc_reply
+
+# Max number of not acknowledged message which RabbitMQ can send to rpc
+# listener. (integer value)
+#rpc_listener_prefetch_count = 100
+
+# Max number of not acknowledged message which RabbitMQ can send to rpc reply
+# listener. (integer value)
+#rpc_reply_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during sending
+# reply. -1 means infinite retry during rpc_timeout (integer value)
+#rpc_reply_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during sending
+# reply. (floating point value)
+#rpc_reply_retry_delay = 0.25
+
+# Reconnecting retry count in case of connectivity problem during sending RPC
+# message, -1 means infinite retry. If actual retry attempts in not 0 the rpc
+# request could be processed more than one time (integer value)
+#default_rpc_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during sending RPC
+# message (floating point value)
+#rpc_retry_delay = 0.25
+
+
+[oslo_messaging_zmq]
+
+#
+# From oslo.messaging
+#
+
+# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
+# The "host" option should point or resolve to this address. (string value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_bind_address
+#rpc_zmq_bind_address = *
+
+# MatchMaker driver. (string value)
+# Allowed values: redis, sentinel, dummy
+# Deprecated group/name - [DEFAULT]/rpc_zmq_matchmaker
+#rpc_zmq_matchmaker = redis
+
+# Number of ZeroMQ contexts, defaults to 1. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_contexts
+#rpc_zmq_contexts = 1
+
+# Maximum number of ingress messages to locally buffer per topic. Default is
+# unlimited. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_topic_backlog
+#rpc_zmq_topic_backlog = <None>
+
+# Directory for holding IPC sockets. (string value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_ipc_dir
+#rpc_zmq_ipc_dir = /var/run/openstack
+
+# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
+# "host" option, if running Nova. (string value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_host
+#rpc_zmq_host = localhost
+
+# Number of seconds to wait before all pending messages will be sent after
+# closing a socket. The default value of -1 specifies an infinite linger
+# period. The value of 0 specifies no linger period. Pending messages shall be
+# discarded immediately when the socket is closed. Positive values specify an
+# upper bound for the linger period. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
+#zmq_linger = -1
+
+# The default number of seconds that poll should wait. Poll raises timeout
+# exception when timeout expired. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_poll_timeout
+#rpc_poll_timeout = 1
+
+# Expiration timeout in seconds of a name service record about existing target
+# ( < 0 means no timeout). (integer value)
+# Deprecated group/name - [DEFAULT]/zmq_target_expire
+#zmq_target_expire = 300
+
+# Update period in seconds of a name service record about existing target.
+# (integer value)
+# Deprecated group/name - [DEFAULT]/zmq_target_update
+#zmq_target_update = 180
+
+# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
+# value)
+# Deprecated group/name - [DEFAULT]/use_pub_sub
+#use_pub_sub = false
+
+# Use ROUTER remote proxy. (boolean value)
+# Deprecated group/name - [DEFAULT]/use_router_proxy
+#use_router_proxy = false
+
+# This option makes direct connections dynamic or static. It makes sense only
+# with use_router_proxy=False which means to use direct connections for direct
+# message types (ignored otherwise). (boolean value)
+#use_dynamic_connections = false
+
+# How many additional connections to a host will be made for failover reasons.
+# This option is actual only in dynamic connections mode. (integer value)
+#zmq_failover_connections = 2
+
+# Minimal port number for random ports range. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+# Deprecated group/name - [DEFAULT]/rpc_zmq_min_port
+#rpc_zmq_min_port = 49153
+
+# Maximal port number for random ports range. (integer value)
+# Minimum value: 1
+# Maximum value: 65536
+# Deprecated group/name - [DEFAULT]/rpc_zmq_max_port
+#rpc_zmq_max_port = 65536
+
+# Number of retries to find free port number before fail with ZMQBindError.
+# (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_bind_port_retries
+#rpc_zmq_bind_port_retries = 100
+
+# Default serialization mechanism for serializing/deserializing
+# outgoing/incoming messages (string value)
+# Allowed values: json, msgpack
+# Deprecated group/name - [DEFAULT]/rpc_zmq_serialization
+#rpc_zmq_serialization = json
+
+# This option configures round-robin mode in zmq socket. True means not keeping
+# a queue when server side disconnects. False means to keep queue and messages
+# even if server is disconnected, when the server appears we send all
+# accumulated messages to it. (boolean value)
+#zmq_immediate = true
+
+# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
+# other negative value) means to skip any overrides and leave it to OS default;
+# 0 and 1 (or any other positive value) mean to disable and enable the option
+# respectively. (integer value)
+#zmq_tcp_keepalive = -1
+
+# The duration between two keepalive transmissions in idle condition. The unit
+# is platform dependent, for example, seconds in Linux, milliseconds in Windows
+# etc. The default value of -1 (or any other negative value and 0) means to
+# skip any overrides and leave it to OS default. (integer value)
+#zmq_tcp_keepalive_idle = -1
+
+# The number of retransmissions to be carried out before declaring that remote
+# end is not available. The default value of -1 (or any other negative value
+# and 0) means to skip any overrides and leave it to OS default. (integer
+# value)
+#zmq_tcp_keepalive_cnt = -1
+
+# The duration between two successive keepalive retransmissions, if
+# acknowledgement to the previous keepalive transmission is not received. The
+# unit is platform dependent, for example, seconds in Linux, milliseconds in
+# Windows etc. The default value of -1 (or any other negative value and 0)
+# means to skip any overrides and leave it to OS default. (integer value)
+#zmq_tcp_keepalive_intvl = -1
+
+# Maximum number of (green) threads to work concurrently. (integer value)
+#rpc_thread_pool_size = 100
+
+# Expiration timeout in seconds of a sent/received message after which it is
+# not tracked anymore by a client/server. (integer value)
+#rpc_message_ttl = 300
+
+# Wait for message acknowledgements from receivers. This mechanism works only
+# via proxy without PUB/SUB. (boolean value)
+#rpc_use_acks = false
+
+# Number of seconds to wait for an ack from a cast/call. After each retry
+# attempt this timeout is multiplied by some specified multiplier. (integer
+# value)
+#rpc_ack_timeout_base = 15
+
+# Number to multiply base ack timeout by after each retry attempt. (integer
+# value)
+#rpc_ack_timeout_multiplier = 2
+
+# Default number of message sending attempts in case of any problems occurred:
+# positive value N means at most N retries, 0 means no retries, None or -1 (or
+# any other negative values) mean to retry forever. This option is used only if
+# acknowledgments are enabled. (integer value)
+#rpc_retry_attempts = 3
+
+# List of publisher hosts SubConsumer can subscribe on. This option has higher
+# priority then the default publishers list taken from the matchmaker. (list
+# value)
+#subscribe_on =
+
+
+[oslo_middleware]
+
+#
+# From oslo.middleware.http_proxy_to_wsgi
+#
+
+# Whether the application is behind a proxy or not. This determines if the
+# middleware should parse the headers or not. (boolean value)
+#enable_proxy_headers_parsing = false
+
+
+[oslo_policy]
+
+#
+# From oslo.policy
+#
+
+# The file that defines policies. (string value)
+# Deprecated group/name - [DEFAULT]/policy_file
+#policy_file = policy.json
+
+# Default rule. Enforced when a requested rule is not found. (string value)
+# Deprecated group/name - [DEFAULT]/policy_default_rule
+#policy_default_rule = default
+
+# Directories where policy configuration files are stored. They can be relative
+# to any directory in the search path defined by the config_dir option, or
+# absolute paths. The file defined by policy_file must exist for these
+# directories to be searched. Missing or empty directories are ignored. (multi
+# valued)
+# Deprecated group/name - [DEFAULT]/policy_dirs
+#policy_dirs = policy.d
+
+
+[polling]
+
+#
+# From ceilometer
+#
+
+# Configuration file for pipeline definition. (string value)
+#cfg_file = polling.yaml
+
+# Work-load partitioning group prefix. Use only if you want to run multiple
+# polling agents with different config files. For each sub-group of the agent
+# pool with the same partitioning_group_prefix a disjoint subset of pollsters
+# should be loaded. (string value)
+# Deprecated group/name - [central]/partitioning_group_prefix
+#partitioning_group_prefix = <None>
+
+
+[publisher]
+
+#
+# From ceilometer
+#
+
+# Secret value for signing messages. Set value empty if signing is not required
+# to avoid computational overhead. (string value)
+# Deprecated group/name - [DEFAULT]/metering_secret
+# Deprecated group/name - [publisher_rpc]/metering_secret
+# Deprecated group/name - [publisher]/metering_secret
+#telemetry_secret = change this for valid signing
+
+
+[publisher_notifier]
+
+#
+# From ceilometer
+#
+
+# The topic that ceilometer uses for metering notifications. (string value)
+#metering_topic = metering
+
+# The topic that ceilometer uses for event notifications. (string value)
+#event_topic = event
+
+# The driver that ceilometer uses for metering notifications. (string value)
+# Deprecated group/name - [publisher_notifier]/metering_driver
+#telemetry_driver = messagingv2
+
+
+[rgw_admin_credentials]
+
+#
+# From ceilometer
+#
+
+# Access key for Radosgw Admin. (string value)
+#access_key = <None>
+
+# Secret key for Radosgw Admin. (string value)
+#secret_key = <None>
+
+
+[service_credentials]
+
+#
+# From ceilometer-auth
+#
+
+auth_type = password
+user_domain_id = {{ agent.identity.get('domain', 'default') }}
+project_domain_id = {{ agent.identity.get('domain', 'default') }}
+project_name = {{ agent.identity.tenant }}
+username = {{ agent.identity.user }}
+password = {{ agent.identity.password }}
+auth_url = http://{{ agent.identity.host }}:5000
+token_cache_time = -1
+interface = internal
+region_name = {{ agent.get('region', 'RegionOne') }}
+
+# Authentication type to load (string value)
+# Deprecated group/name - [service_credentials]/auth_plugin
+#auth_type = <None>
+
+# Config Section from which to load plugin specific options (string value)
+#auth_section = <None>
+
+# Authentication URL (string value)
+#auth_url = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Project ID to scope to (string value)
+# Deprecated group/name - [service_credentials]/tenant-id
+#project_id = <None>
+
+# Project name to scope to (string value)
+# Deprecated group/name - [service_credentials]/tenant-name
+#project_name = <None>
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used
+# for both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# User id (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [service_credentials]/user-name
+#username = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
+# User's password (string value)
+#password = <None>
+
+# Region name to use for OpenStack service endpoints. (string value)
+# Deprecated group/name - [DEFAULT]/os_region_name
+#region_name = <None>
+
+# Type of endpoint in Identity service catalog to use for communication with
+# OpenStack services. (string value)
+# Allowed values: public, internal, admin, auth, publicURL, internalURL, adminURL
+# Deprecated group/name - [service_credentials]/os_endpoint_type
+#interface = public
+
+
+[service_types]
+
+#
+# From ceilometer
+#
+
+# Kwapi service type. (string value)
+#kwapi = energy
+
+# Glance service type. (string value)
+#glance = image
+
+# Neutron service type. (string value)
+#neutron = network
+
+# Neutron load balancer version. (string value)
+# Allowed values: v1, v2
+#neutron_lbaas_version = v2
+
+# Nova service type. (string value)
+#nova = compute
+
+# Radosgw service type. (string value)
+#radosgw = <None>
+
+# Swift service type. (string value)
+#swift = object-store
+
+# Cinder service type. (string value)
+# Deprecated group/name - [service_types]/cinderv2
+#cinder = volumev3
+
+
+[storage]
+
+#
+# From ceilometer
+#
+
+# Maximum number of connection retries during startup. Set to -1 to specify an
+# infinite retry count. (integer value)
+# Deprecated group/name - [database]/max_retries
+#max_retries = 10
+
+# Interval (in seconds) between retries of connection. (integer value)
+# Deprecated group/name - [database]/retry_interval
+#retry_interval = 10
+
+
+[vmware]
+
+#
+# From ceilometer
+#
+
+# IP address of the VMware vSphere host. (string value)
+#host_ip =
+
+# Port of the VMware vSphere host. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#host_port = 443
+
+# Username of VMware vSphere. (string value)
+#host_username =
+
+# Password of VMware vSphere. (string value)
+#host_password =
+
+# CA bundle file to use in verifying the vCenter server certificate. (string
+# value)
+#ca_file = <None>
+
+# If true, the vCenter server certificate is not verified. If false, then the
+# default CA truststore is used for verification. This option is ignored if
+# "ca_file" is set. (boolean value)
+#insecure = false
+
+# Number of times a VMware vSphere API may be retried. (integer value)
+#api_retry_count = 10
+
+# Sleep time in seconds for polling an ongoing async task. (floating point
+# value)
+#task_poll_interval = 0.5
+
+# Optional vim service WSDL location e.g http://<server>/vimService.wsdl.
+# Optional over-ride to default location for bug work-arounds. (string value)
+#wsdl_location = <None>
+
+
+[xenapi]
+
+#
+# From ceilometer
+#
+
+# URL for connection to XenServer/Xen Cloud Platform. (string value)
+#connection_url = <None>
+
+# Username for connection to XenServer/Xen Cloud Platform. (string value)
+#connection_username = root
+
+# Password for connection to XenServer/Xen Cloud Platform. (string value)
+#connection_password = <None>
diff --git a/ceilometer/files/pike/ceilometer-server.conf.Debian b/ceilometer/files/pike/ceilometer-server.conf.Debian
new file mode 100644
index 0000000..895cdad
--- /dev/null
+++ b/ceilometer/files/pike/ceilometer-server.conf.Debian
@@ -0,0 +1,2268 @@
+{%- from "ceilometer/map.jinja" import server with context -%}
+[DEFAULT]
+
+#
+# From ceilometer
+#
+
+# To reduce polling agent load, samples are sent to the notification agent in a
+# batch. To gain higher throughput at the cost of load set this to False.
+# (boolean value)
+#batch_polled_samples = true
+
+# To reduce large requests at same time to Nova or other components from
+# different compute agents, shuffle start time of polling task. (integer value)
+#shuffle_time_before_polling_task = 0
+
+# Configuration file for WSGI definition of API. (string value)
+#api_paste_config = api_paste.ini
+
+# Inspector to use for inspecting the hypervisor layer. Known inspectors are
+# libvirt, hyperv, vsphere, xenapi and powervm. (string value)
+#hypervisor_inspector = libvirt
+
+# Libvirt domain type. (string value)
+# Allowed values: kvm, lxc, qemu, uml, xen
+#libvirt_type = kvm
+
+# Override the default libvirt URI (which is dependent on libvirt_type).
+# (string value)
+#libvirt_uri =
+
+# Dispatchers to process metering data. (multi valued)
+# Deprecated group/name - [DEFAULT]/dispatcher
+#meter_dispatchers =
+
+# Dispatchers to process event data. (multi valued)
+# Deprecated group/name - [DEFAULT]/dispatcher
+#event_dispatchers =
+
+# Exchange name for Ironic notifications. (string value)
+#ironic_exchange = ironic
+
+# Exchanges name to listen for notifications. (multi valued)
+#http_control_exchanges = nova
+#http_control_exchanges = glance
+#http_control_exchanges = neutron
+#http_control_exchanges = cinder
+
+# DEPRECATED: Allow novaclient's debug log output. (Use default_log_levels
+# instead) (boolean value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#nova_http_log_debug = false
+
+# Swift reseller prefix. Must be on par with reseller_prefix in proxy-
+# server.conf. (string value)
+#reseller_prefix = AUTH_
+
+# Configuration file for pipeline definition. (string value)
+#pipeline_cfg_file = pipeline.yaml
+
+# Configuration file for event pipeline definition. (string value)
+#event_pipeline_cfg_file = event_pipeline.yaml
+
+# Refresh Pipeline configuration on-the-fly. (boolean value)
+#refresh_pipeline_cfg = false
+
+# Refresh Event Pipeline configuration on-the-fly. (boolean value)
+#refresh_event_pipeline_cfg = false
+
+# Polling interval for pipeline file configuration in seconds. (integer value)
+#pipeline_polling_interval = 20
+
+# Source for samples emitted on this instance. (string value)
+#sample_source = openstack
+
+# List of metadata prefixes reserved for metering use. (list value)
+#reserved_metadata_namespace = metering.
+
+# Limit on length of reserved metadata values. (integer value)
+#reserved_metadata_length = 256
+
+# List of metadata keys reserved for metering use. And these keys are
+# additional to the ones included in the namespace. (list value)
+#reserved_metadata_keys =
+
+# Path to the rootwrap configuration file to use for running commands as root
+# (string value)
+#rootwrap_config = /etc/ceilometer/rootwrap.conf
+
+# Exchange name for Nova notifications. (string value)
+#nova_control_exchange = nova
+
+# Exchange name for Neutron notifications. (string value)
+#neutron_control_exchange = neutron
+
+# Exchange name for Heat notifications (string value)
+#heat_control_exchange = heat
+
+# Exchange name for Glance notifications. (string value)
+#glance_control_exchange = glance
+
+# Exchange name for Keystone notifications. (string value)
+#keystone_control_exchange = keystone
+
+# Exchange name for Cinder notifications. (string value)
+#cinder_control_exchange = cinder
+
+# Exchange name for Data Processing notifications. (string value)
+#sahara_control_exchange = sahara
+
+# Exchange name for Swift notifications. (string value)
+#swift_control_exchange = swift
+
+# Exchange name for Magnum notifications. (string value)
+#magnum_control_exchange = magnum
+
+# Exchange name for DBaaS notifications. (string value)
+#trove_control_exchange = trove
+
+# Exchange name for Messaging service notifications. (string value)
+#zaqar_control_exchange = zaqar
+
+# Exchange name for DNS service notifications. (string value)
+#dns_control_exchange = central
+
+# Exchange name for ceilometer notifications. (string value)
+#ceilometer_control_exchange = ceilometer
+
+# Name of this node, which must be valid in an AMQP key. Can be an opaque
+# identifier. For ZeroMQ only, must be a valid host name, FQDN, or IP address.
+# (string value)
+#host = <your_hostname>
+
+# Timeout seconds for HTTP requests. Set it to None to disable timeout.
+# (integer value)
+#http_timeout = 600
+
+#
+# From oslo.log
+#
+
+# If set to true, the logging level will be set to DEBUG instead of the default
+# INFO level. (boolean value)
+# Note: This option can be changed without restarting.
+#debug = false
+debug = false
+
+# DEPRECATED: If set to false, the logging level will be set to WARNING instead
+# of the default INFO level. (boolean value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#verbose = true
+
+# The name of a logging configuration file. This file is appended to any
+# existing logging configuration files. For details about logging configuration
+# files, see the Python logging module documentation. Note that when logging
+# configuration files are used then all logging configuration is set in the
+# configuration file and other logging configuration options are ignored (for
+# example, logging_context_format_string). (string value)
+# Note: This option can be changed without restarting.
+# Deprecated group/name - [DEFAULT]/log_config
+#log_config_append = <None>
+{%- if server.logging.log_appender %}
+log_config_append=/etc/ceilometer/logging.conf
+{%- endif %}
+
+# Defines the format string for %%(asctime)s in log records. Default:
+# %(default)s . This option is ignored if log_config_append is set. (string
+# value)
+#log_date_format = %Y-%m-%d %H:%M:%S
+
+# (Optional) Name of log file to send logging output to. If no default is set,
+# logging will go to stderr as defined by use_stderr. This option is ignored if
+# log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logfile
+#log_file = <None>
+
+# (Optional) The base directory used for relative log_file paths. This option
+# is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logdir
+#log_dir = <None>
+
+# Uses logging handler designed to watch file system. When log file is moved or
+# removed this handler will open a new log file with specified path
+# instantaneously. It makes sense only if log_file option is specified and
+# Linux platform is used. This option is ignored if log_config_append is set.
+# (boolean value)
+#watch_log_file = false
+
+# Use syslog for logging. Existing syslog format is DEPRECATED and will be
+# changed later to honor RFC5424. This option is ignored if log_config_append
+# is set. (boolean value)
+#use_syslog = false
+
+# Syslog facility to receive log lines. This option is ignored if
+# log_config_append is set. (string value)
+#syslog_log_facility = LOG_USER
+
+# Log output to standard error. This option is ignored if log_config_append is
+# set. (boolean value)
+#use_stderr = false
+
+# Format string to use for log messages with context. (string value)
+#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
+
+# Format string to use for log messages when context is undefined. (string
+# value)
+#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
+
+# Additional data to append to log message when logging level for the message
+# is DEBUG. (string value)
+#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
+
+# Prefix each line of exception output with this format. (string value)
+#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
+
+# Defines the format string for %(user_identity)s that is used in
+# logging_context_format_string. (string value)
+#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
+
+# List of package logging levels in logger=LEVEL pairs. This option is ignored
+# if log_config_append is set. (list value)
+#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
+
+# Enables or disables publication of error events. (boolean value)
+#publish_errors = false
+
+# The format for an instance that is passed with the log message. (string
+# value)
+#instance_format = "[instance: %(uuid)s] "
+
+# The format for an instance UUID that is passed with the log message. (string
+# value)
+#instance_uuid_format = "[instance: %(uuid)s] "
+
+# Interval, number of seconds, of log rate limiting. (integer value)
+#rate_limit_interval = 0
+
+# Maximum number of logged messages per rate_limit_interval. (integer value)
+#rate_limit_burst = 0
+
+# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG
+# or empty string. Logs with level greater or equal to rate_limit_except_level
+# are not filtered. An empty string means that all levels are filtered. (string
+# value)
+#rate_limit_except_level = CRITICAL
+
+# Enables or disables fatal status of deprecations. (boolean value)
+#fatal_deprecations = false
+
+#
+# From oslo.messaging
+#
+
+# Size of RPC connection pool. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_conn_pool_size
+#rpc_conn_pool_size = 30
+
+# The pool size limit for connections expiration policy (integer value)
+#conn_pool_min_size = 2
+
+# The time-to-live in sec of idle connections in the pool (integer value)
+#conn_pool_ttl = 1200
+
+# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
+# The "host" option should point or resolve to this address. (string value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_bind_address
+#rpc_zmq_bind_address = *
+
+# MatchMaker driver. (string value)
+# Allowed values: redis, sentinel, dummy
+# Deprecated group/name - [DEFAULT]/rpc_zmq_matchmaker
+#rpc_zmq_matchmaker = redis
+
+# Number of ZeroMQ contexts, defaults to 1. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_contexts
+#rpc_zmq_contexts = 1
+
+# Maximum number of ingress messages to locally buffer per topic. Default is
+# unlimited. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_topic_backlog
+#rpc_zmq_topic_backlog = <None>
+
+# Directory for holding IPC sockets. (string value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_ipc_dir
+#rpc_zmq_ipc_dir = /var/run/openstack
+
+# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
+# "host" option, if running Nova. (string value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_host
+#rpc_zmq_host = localhost
+
+# Number of seconds to wait before all pending messages will be sent after
+# closing a socket. The default value of -1 specifies an infinite linger
+# period. The value of 0 specifies no linger period. Pending messages shall be
+# discarded immediately when the socket is closed. Positive values specify an
+# upper bound for the linger period. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
+#zmq_linger = -1
+
+# The default number of seconds that poll should wait. Poll raises timeout
+# exception when timeout expired. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_poll_timeout
+#rpc_poll_timeout = 1
+
+# Expiration timeout in seconds of a name service record about existing target
+# ( < 0 means no timeout). (integer value)
+# Deprecated group/name - [DEFAULT]/zmq_target_expire
+#zmq_target_expire = 300
+
+# Update period in seconds of a name service record about existing target.
+# (integer value)
+# Deprecated group/name - [DEFAULT]/zmq_target_update
+#zmq_target_update = 180
+
+# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
+# value)
+# Deprecated group/name - [DEFAULT]/use_pub_sub
+#use_pub_sub = false
+
+# Use ROUTER remote proxy. (boolean value)
+# Deprecated group/name - [DEFAULT]/use_router_proxy
+#use_router_proxy = false
+
+# This option makes direct connections dynamic or static. It makes sense only
+# with use_router_proxy=False which means to use direct connections for direct
+# message types (ignored otherwise). (boolean value)
+#use_dynamic_connections = false
+
+# How many additional connections to a host will be made for failover reasons.
+# This option is actual only in dynamic connections mode. (integer value)
+#zmq_failover_connections = 2
+
+# Minimal port number for random ports range. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+# Deprecated group/name - [DEFAULT]/rpc_zmq_min_port
+#rpc_zmq_min_port = 49153
+
+# Maximal port number for random ports range. (integer value)
+# Minimum value: 1
+# Maximum value: 65536
+# Deprecated group/name - [DEFAULT]/rpc_zmq_max_port
+#rpc_zmq_max_port = 65536
+
+# Number of retries to find free port number before fail with ZMQBindError.
+# (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_bind_port_retries
+#rpc_zmq_bind_port_retries = 100
+
+# Default serialization mechanism for serializing/deserializing
+# outgoing/incoming messages (string value)
+# Allowed values: json, msgpack
+# Deprecated group/name - [DEFAULT]/rpc_zmq_serialization
+#rpc_zmq_serialization = json
+
+# This option configures round-robin mode in zmq socket. True means not keeping
+# a queue when server side disconnects. False means to keep queue and messages
+# even if server is disconnected, when the server appears we send all
+# accumulated messages to it. (boolean value)
+#zmq_immediate = true
+
+# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
+# other negative value) means to skip any overrides and leave it to OS default;
+# 0 and 1 (or any other positive value) mean to disable and enable the option
+# respectively. (integer value)
+#zmq_tcp_keepalive = -1
+
+# The duration between two keepalive transmissions in idle condition. The unit
+# is platform dependent, for example, seconds in Linux, milliseconds in Windows
+# etc. The default value of -1 (or any other negative value and 0) means to
+# skip any overrides and leave it to OS default. (integer value)
+#zmq_tcp_keepalive_idle = -1
+
+# The number of retransmissions to be carried out before declaring that remote
+# end is not available. The default value of -1 (or any other negative value
+# and 0) means to skip any overrides and leave it to OS default. (integer
+# value)
+#zmq_tcp_keepalive_cnt = -1
+
+# The duration between two successive keepalive retransmissions, if
+# acknowledgement to the previous keepalive transmission is not received. The
+# unit is platform dependent, for example, seconds in Linux, milliseconds in
+# Windows etc. The default value of -1 (or any other negative value and 0)
+# means to skip any overrides and leave it to OS default. (integer value)
+#zmq_tcp_keepalive_intvl = -1
+
+# Maximum number of (green) threads to work concurrently. (integer value)
+#rpc_thread_pool_size = 100
+
+# Expiration timeout in seconds of a sent/received message after which it is
+# not tracked anymore by a client/server. (integer value)
+#rpc_message_ttl = 300
+
+# Wait for message acknowledgements from receivers. This mechanism works only
+# via proxy without PUB/SUB. (boolean value)
+#rpc_use_acks = false
+
+# Number of seconds to wait for an ack from a cast/call. After each retry
+# attempt this timeout is multiplied by some specified multiplier. (integer
+# value)
+#rpc_ack_timeout_base = 15
+
+# Number to multiply base ack timeout by after each retry attempt. (integer
+# value)
+#rpc_ack_timeout_multiplier = 2
+
+# Default number of message sending attempts in case of any problems occurred:
+# positive value N means at most N retries, 0 means no retries, None or -1 (or
+# any other negative values) mean to retry forever. This option is used only if
+# acknowledgments are enabled. (integer value)
+#rpc_retry_attempts = 3
+
+# List of publisher hosts SubConsumer can subscribe on. This option has higher
+# priority then the default publishers list taken from the matchmaker. (list
+# value)
+#subscribe_on =
+
+# Size of executor thread pool. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
+#executor_thread_pool_size = 64
+{%- if server.message_queue.rpc_thread_pool_size is defined %}
+executor_thread_pool_size = {{ server.message_queue.rpc_thread_pool_size }}
+{%- endif %}
+
+# Seconds to wait for a response from a call. (integer value)
+#rpc_response_timeout = 60
+
+# A URL representing the messaging driver to use and its full configuration.
+# (string value)
+#transport_url = <None>
+{%- if server.message_queue.members is defined %}
+transport_url = rabbit://{% for member in server.message_queue.members -%}
+ {{ server.message_queue.user }}:{{ server.message_queue.password }}@{{ member.host }}:{{ member.get('port', 5672) }}
+ {%- if not loop.last -%},{%- endif -%}
+ {%- endfor -%}
+ /{{ server.message_queue.virtual_host }}
+{%- else %}
+transport_url = rabbit://{{ server.message_queue.user }}:{{ server.message_queue.password }}@{{ server.message_queue.host }}:{{ server.message_queue.port }}/{{ server.message_queue.virtual_host }}
+{%- endif %}
+
+# DEPRECATED: The messaging driver to use, defaults to rabbit. Other drivers
+# include amqp and zmq. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rpc_backend = rabbit
+
+# The default exchange under which topics are scoped. May be overridden by an
+# exchange name specified in the transport_url option. (string value)
+#control_exchange = openstack
+
+#
+# From oslo.service.service
+#
+
+# Enable eventlet backdoor. Acceptable values are 0, <port>, and
+# <start>:<end>, where 0 results in listening on a random tcp port number;
+# <port> results in listening on the specified port number (and not enabling
+# backdoor if that port is in use); and <start>:<end> results in listening on
+# the smallest unused port number within the specified range of port numbers.
+# The chosen port is displayed in the service's log file. (string value)
+#backdoor_port = <None>
+
+# Enable eventlet backdoor, using the provided path as a unix socket that can
+# receive connections. This option is mutually exclusive with 'backdoor_port'
+# in that only one should be provided. If both are provided then the existence
+# of this option overrides the usage of that option. (string value)
+#backdoor_socket = <None>
+
+# Enables or disables logging values of all registered options when starting a
+# service (at DEBUG level). (boolean value)
+#log_options = true
+
+# Specify a timeout after which a gracefully shutdown server will exit. Zero
+# value means endless wait. (integer value)
+#graceful_shutdown_timeout = 60
+
+# List of pollsters (or wildcard templates) to be used while polling
+#pollster_list =
+{%- if server.pollster_list is defined %}
+pollster_list = {{ server.pollster_list }}
+{%- endif %}
+
+# To reduce polling agent load, samples are sent to the notification
+# agent in a batch. To gain higher throughput at the cost of load set
+# this to False.
+#batch_polled_samples = True
+{%- if server.batch_polled_samples is defined %}
+batch_polled_samples = {{ server.batch_polled_samples|lower }}
+{%- endif %}
+
+[api]
+
+#
+# From ceilometer
+#
+
+# Default maximum number of items returned by API request. (integer value)
+# Minimum value: 1
+#default_api_return_limit = 100
+
+# Set True to disable resource/meter/sample URLs. Default autodetection by
+# querying keystone. (boolean value)
+#gnocchi_is_enabled = <None>
+
+# Set True to redirect alarms URLs to aodh. Default autodetection by querying
+# keystone. (boolean value)
+#aodh_is_enabled = <None>
+
+# The endpoint of Aodh to redirect alarms URLs to Aodh API. Default
+# autodetection by querying keystone. (string value)
+#aodh_url = <None>
+
+# Set True to redirect events URLs to Panko. Default autodetection by querying
+# keystone. (boolean value)
+#panko_is_enabled = <None>
+
+# The endpoint of Panko to redirect events URLs to Panko API. Default
+# autodetection by querying keystone. (string value)
+#panko_url = <None>
+
+
+[collector]
+
+#
+# From ceilometer
+#
+
+# Address to which the UDP socket is bound. Set to an empty string to disable.
+# (string value)
+#udp_address = 0.0.0.0
+
+# Port to which the UDP socket is bound. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#udp_port = 4952
+
+# Number of notification messages to wait before dispatching them (integer
+# value)
+#batch_size = 1
+
+# Number of seconds to wait before dispatching samples when batch_size is not
+# reached (None means indefinitely) (integer value)
+#batch_timeout = <None>
+
+# Number of workers for collector service. default value is 1. (integer value)
+# Minimum value: 1
+# Deprecated group/name - [DEFAULT]/collector_workers
+#workers = 1
+
+
+[compute]
+
+#
+# From ceilometer
+#
+
+# DEPRECATED: Enable work-load partitioning, allowing multiple compute agents
+# to be run simultaneously. (replaced by instance_discovery_method) (boolean
+# value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#workload_partitioning = false
+
+# Ceilometer offers many methods to discover the instance running on a compute
+# node:
+# * naive: poll nova to get all instances
+# * workload_partitioning: poll nova to get instances of the compute
+# * libvirt_metadata: get instances from libvirt metadata but without
+# instance metadata (recommended for Gnocchi backend (string value)
+# Allowed values: naive, workload_partitioning, libvirt_metadata
+#instance_discovery_method = libvirt_metadata
+
+# New instances will be discovered periodically based on this option (in
+# seconds). By default, the agent discovers instances according to pipeline
+# polling interval. If option is greater than 0, the instance list to poll will
+# be updated based on this option's interval. Measurements relating to the
+# instances will match intervals defined in pipeline. (integer value)
+# Minimum value: 0
+#resource_update_interval = 0
+
+# The expiry to totally refresh the instances resource cache, since the
+# instance may be migrated to another host, we need to clean the legacy
+# instances info in local cache by totally refreshing the local cache. The
+# minimum should be the value of the config option of resource_update_interval.
+# This option is only used for agent polling to Nova API, so it will works only
+# when 'instance_discovery_method' was set to 'naive'. (integer value)
+# Minimum value: 0
+#resource_cache_expiry = 3600
+
+
+[coordination]
+
+#
+# From ceilometer
+#
+
+# The backend URL to use for distributed coordination. If left empty, per-
+# deployment central agent and per-host compute agent won't do workload
+# partitioning and will only function correctly if a single instance of that
+# service is running. (string value)
+#backend_url = <None>
+
+# Number of seconds between heartbeats for distributed coordination. (floating
+# point value)
+#heartbeat = 1.0
+
+# Number of seconds between checks to see if group membership has changed
+# (floating point value)
+#check_watchers = 10.0
+
+# Retry backoff factor when retrying to connect with coordination backend
+# (integer value)
+#retry_backoff = 1
+
+# Maximum number of seconds between retry to join partitioning group (integer
+# value)
+#max_retry_interval = 30
+
+
+[cors]
+
+#
+# From oslo.middleware.cors
+#
+
+# Indicate whether this resource may be shared with the domain received in the
+# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
+# slash. Example: https://horizon.example.com (list value)
+#allowed_origin = <None>
+{% if server.get('cors', {}).allowed_origin is defined %}
+allowed_origin = {{ server.cors.allowed_origin }}
+{% endif %}
+
+# Indicate that the actual request can include user credentials (boolean value)
+#allow_credentials = true
+{% if server.get('cors', {}).allow_credentials is defined %}
+allow_credentials = {{ server.cors.allow_credentials }}
+{% endif %}
+
+# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
+# Headers. (list value)
+#expose_headers = X-Auth-Token,X-Subject-Token,X-Service-Token,X-Openstack-Request-Id
+{% if server.get('cors', {}).expose_headers is defined %}
+expose_headers = {{ server.cors.expose_headers }}
+{% endif %}
+
+# Maximum cache age of CORS preflight requests. (integer value)
+#max_age = 3600
+{% if server.get('cors', {}).max_age is defined %}
+max_age = {{ server.cors.max_age }}
+{% endif %}
+
+# Indicate which methods can be used during the actual request. (list value)
+#allow_methods = GET,PUT,POST,DELETE,PATCH
+{% if server.get('cors', {}).allow_methods is defined %}
+allow_methods = {{ server.cors.allow_methods }}
+{% endif %}
+
+# Indicate which header field names may be used during the actual request.
+# (list value)
+#allow_headers = X-Auth-Token,X-Identity-Status,X-Roles,X-Service-Catalog,X-User-Id,X-Tenant-Id,X-Openstack-Request-Id
+{% if server.get('cors', {}).allow_headers is defined %}
+allow_headers = {{ server.cors.allow_headers }}
+{% endif %}
+
+
+[cors.subdomain]
+
+#
+# From oslo.middleware.cors
+#
+
+# Indicate whether this resource may be shared with the domain received in the
+# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
+# slash. Example: https://horizon.example.com (list value)
+#allowed_origin = <None>
+
+# Indicate that the actual request can include user credentials (boolean value)
+#allow_credentials = true
+
+# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
+# Headers. (list value)
+#expose_headers = X-Auth-Token,X-Subject-Token,X-Service-Token,X-Openstack-Request-Id
+
+# Maximum cache age of CORS preflight requests. (integer value)
+#max_age = 3600
+
+# Indicate which methods can be used during the actual request. (list value)
+#allow_methods = GET,PUT,POST,DELETE,PATCH
+
+# Indicate which header field names may be used during the actual request.
+# (list value)
+#allow_headers = X-Auth-Token,X-Identity-Status,X-Roles,X-Service-Catalog,X-User-Id,X-Tenant-Id,X-Openstack-Request-Id
+
+
+[database]
+
+#
+# From ceilometer
+#
+
+# Number of seconds that samples are kept in the database for (<= 0 means
+# forever). (integer value)
+# Deprecated group/name - [database]/time_to_live
+#metering_time_to_live = -1
+
+# The connection string used to connect to the metering database. (if unset,
+# connection is used) (string value)
+#metering_connection = <None>
+
+# Indicates if expirer expires only samples. If set true, expired samples will
+# be deleted, but residual resource and meter definition data will remain.
+# (boolean value)
+#sql_expire_samples_only = false
+
+#
+# From oslo.db
+#
+
+# DEPRECATED: The file name to use with SQLite. (string value)
+# Deprecated group/name - [DEFAULT]/sqlite_db
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Should use config option connection or slave_connection to connect
+# the database.
+#sqlite_db = oslo.sqlite
+
+# If True, SQLite uses synchronous mode. (boolean value)
+# Deprecated group/name - [DEFAULT]/sqlite_synchronous
+#sqlite_synchronous = true
+
+# The back end to use for the database. (string value)
+# Deprecated group/name - [DEFAULT]/db_backend
+#backend = sqlalchemy
+
+# The SQLAlchemy connection string to use to connect to the database. (string
+# value)
+# Deprecated group/name - [DEFAULT]/sql_connection
+# Deprecated group/name - [DATABASE]/sql_connection
+# Deprecated group/name - [sql]/connection
+#connection = <None>
+
+{%- if server.database.influxdb is defined %}
+{%- if server.database.influxdb.members is defined %}
+metering_connection = {% for member in server.database.influxdb.members -%}
+ stacklight://{{ server.database.influxdb.user }}:{{ server.database.influxdb.password }}@{% for member in server.database.influxdb.members %}{{ member.host }}:{{ member.port }}{% if not loop.last %},{% endif %}{% endfor %}/{{ server.database.influxdb.name }}
+ {%- endfor -%}
+{%- else %}
+metering_connection = stacklight://{{ server.database.influxdb.user }}:{{ server.database.influxdb.password }}@{{ server.database.influxdb.host }}:{{ server.database.influxdb.port }}/{{ server.database.influxdb.database }}
+{%- endif %}
+{%- endif %}
+
+{%- if server.database.elasticsearch is defined %}
+{%- if server.database.elasticsearch.get('enabled', false) %}
+resource_connection = es://{{ server.database.elasticsearch.host}}:{{server.database.elasticsearch.port }}
+event_connection = es://{{ server.database.elasticsearch.host}}:{{server.database.elasticsearch.port }}
+{%- else %}
+resource_connection = es://localhost:9200
+event_connection = log://
+{%- endif %}
+{%- endif %}
+
+{%- if server.database.engine == "mongodb" %}
+{%- if server.database.members is defined %}
+connection={{ server.database.engine }}://{{ server.database.user }}:{{ server.database.password }}@{% for member in server.database.members %}{{ member.host }}:{{ member.port }}{% if not loop.last %},{% endif %}{% endfor %}/{{ server.database.name }}
+{%- else %}
+connection={{ server.database.engine }}://{{ server.database.user }}:{{ server.database.password }}@{{ server.database.host }}:{{ server.database.port }}/{{ server.database.name }}
+{%- endif %}
+{%- endif %}
+
+# The SQLAlchemy connection string to use to connect to the slave database.
+# (string value)
+#slave_connection = <None>
+
+# The SQL mode to be used for MySQL sessions. This option, including the
+# default, overrides any server-set SQL mode. To use whatever SQL mode is set
+# by the server configuration, set this to no value. Example: mysql_sql_mode=
+# (string value)
+#mysql_sql_mode = TRADITIONAL
+
+# Timeout before idle SQL connections are reaped. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_idle_timeout
+# Deprecated group/name - [DATABASE]/sql_idle_timeout
+# Deprecated group/name - [sql]/idle_timeout
+#idle_timeout = 3600
+
+# Minimum number of SQL connections to keep open in a pool. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_min_pool_size
+# Deprecated group/name - [DATABASE]/sql_min_pool_size
+#min_pool_size = 1
+
+# Maximum number of SQL connections to keep open in a pool. Setting a value of
+# 0 indicates no limit. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_max_pool_size
+# Deprecated group/name - [DATABASE]/sql_max_pool_size
+#max_pool_size = 5
+
+# Maximum number of database connection retries during startup. Set to -1 to
+# specify an infinite retry count. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_max_retries
+# Deprecated group/name - [DATABASE]/sql_max_retries
+#max_retries = 10
+
+# Interval between retries of opening a SQL connection. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_retry_interval
+# Deprecated group/name - [DATABASE]/reconnect_interval
+#retry_interval = 10
+
+# If set, use this value for max_overflow with SQLAlchemy. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_max_overflow
+# Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
+#max_overflow = 50
+
+# Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
+# value)
+# Minimum value: 0
+# Maximum value: 100
+# Deprecated group/name - [DEFAULT]/sql_connection_debug
+#connection_debug = 0
+
+# Add Python stack traces to SQL as comment strings. (boolean value)
+# Deprecated group/name - [DEFAULT]/sql_connection_trace
+#connection_trace = false
+
+# If set, use this value for pool_timeout with SQLAlchemy. (integer value)
+# Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
+#pool_timeout = <None>
+
+# Enable the experimental use of database reconnect on connection lost.
+# (boolean value)
+#use_db_reconnect = false
+
+# Seconds between retries of a database transaction. (integer value)
+#db_retry_interval = 1
+
+# If True, increases the interval between retries of a database operation up to
+# db_max_retry_interval. (boolean value)
+#db_inc_retry_interval = true
+
+# If db_inc_retry_interval is set, the maximum seconds between retries of a
+# database operation. (integer value)
+#db_max_retry_interval = 10
+
+# Maximum retries in case of connection error or deadlock error before error is
+# raised. Set to -1 to specify an infinite retry count. (integer value)
+#db_max_retries = 20
+
+
+[dispatcher_file]
+
+#
+# From ceilometer
+#
+
+# Name and the location of the file to record meters. (string value)
+#file_path = <None>
+
+# The max size of the file. (integer value)
+#max_bytes = 0
+
+# The max number of the files to keep. (integer value)
+#backup_count = 0
+
+
+[dispatcher_gnocchi]
+
+#
+# From ceilometer
+#
+
+# Filter out samples generated by Gnocchi service activity (boolean value)
+#filter_service_activity = true
+
+# Gnocchi project used to filter out samples generated by Gnocchi service
+# activity (string value)
+#filter_project = gnocchi
+
+# The archive policy to use when the dispatcher create a new metric. (string
+# value)
+#archive_policy = <None>
+
+# The Yaml file that defines mapping between samples and gnocchi
+# resources/metrics (string value)
+#resources_definition_file = gnocchi_resources.yaml
+
+
+[dispatcher_http]
+
+#
+# From ceilometer
+#
+
+# The target where the http request will be sent. If this is not set, no data
+# will be posted. For example: target = http://hostname:1234/path (string
+# value)
+#target =
+
+# The target for event data where the http request will be sent to. If this is
+# not set, it will default to same as Sample target. (string value)
+#event_target = <None>
+
+# The max time in seconds to wait for a request to timeout. (integer value)
+#timeout = 5
+
+# The path to a server certificate or directory if the system CAs are not used
+# or if a self-signed certificate is used. Set to False to ignore SSL cert
+# verification. (string value)
+#verify_ssl = <None>
+
+# Indicates whether samples are published in a batch. (boolean value)
+#batch_mode = false
+
+
+[event]
+
+#
+# From ceilometer
+#
+
+# Configuration file for event definitions. (string value)
+#definitions_cfg_file = event_definitions.yaml
+
+# Drop notifications if no event definition matches. (Otherwise, we convert
+# them with just the default traits) (boolean value)
+#drop_unmatched_notifications = false
+
+# Store the raw notification for select priority levels (info and/or error). By
+# default, raw details are not captured. (multi valued)
+#store_raw =
+
+
+[hardware]
+
+#
+# From ceilometer
+#
+
+# URL scheme to use for hardware nodes. (string value)
+#url_scheme = snmp://
+
+# SNMPd user name of all nodes running in the cloud. (string value)
+#readonly_user_name = ro_snmp_user
+
+# SNMPd v3 authentication password of all the nodes running in the cloud.
+# (string value)
+#readonly_user_password = password
+
+# SNMPd v3 authentication algorithm of all the nodes running in the cloud
+# (string value)
+# Allowed values: md5, sha
+#readonly_user_auth_proto = <None>
+
+# SNMPd v3 encryption algorithm of all the nodes running in the cloud (string
+# value)
+# Allowed values: des, aes128, 3des, aes192, aes256
+#readonly_user_priv_proto = <None>
+
+# SNMPd v3 encryption password of all the nodes running in the cloud. (string
+# value)
+#readonly_user_priv_password = <None>
+
+# Name of the control plane Tripleo network (string value)
+#tripleo_network_name = ctlplane
+
+# Configuration file for defining hardware snmp meters. (string value)
+#meter_definitions_file = snmp.yaml
+
+
+[ipmi]
+
+#
+# From ceilometer
+#
+
+# Number of retries upon Intel Node Manager initialization failure (integer
+# value)
+#node_manager_init_retry = 3
+
+# Tolerance of IPMI/NM polling failures before disable this pollster. Negative
+# indicates retrying forever. (integer value)
+#polling_retry = 3
+
+
+[keystone_authtoken]
+
+#
+# From keystonemiddleware.auth_token
+#auth_type = password
+
+auth_type = password
+user_domain_id = {{ server.identity.get('domain', 'default') }}
+project_domain_id = {{ server.identity.get('domain', 'default') }}
+project_name = {{ server.identity.tenant }}
+username = {{ server.identity.user }}
+password = {{ server.identity.password }}
+auth_uri = http://{{ server.identity.host }}:5000
+auth_url = http://{{ server.identity.host }}:35357
+interface = internal
+
+{%- if server.cache is defined %}
+memcached_servers = {%- for member in server.cache.members %}{{ member.host }}:{{ member.get('port', '11211') }}{% if not loop.last %},{% endif %}{%- endfor %}
+{%- else %}
+token_cache_time = -1
+{%- endif %}
+
+# Complete "public" Identity API endpoint. This endpoint should not be an
+# "admin" endpoint, as it should be accessible by all end users.
+# Unauthenticated clients are redirected to this endpoint to authenticate.
+# Although this endpoint should ideally be unversioned, client support in the
+# wild varies. If you're using a versioned v2 endpoint here, then this should
+# *not* be the same endpoint the service user utilizes for validating tokens,
+# because normal end users may not be able to reach that endpoint. (string
+# value)
+#auth_uri = <None>
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+# Do not handle authorization requests within the middleware, but delegate the
+# authorization decision to downstream WSGI components. (boolean value)
+#delay_auth_decision = false
+
+# Request timeout value for communicating with Identity API server. (integer
+# value)
+#http_connect_timeout = <None>
+
+# How many times are we trying to reconnect when communicating with Identity
+# API Server. (integer value)
+#http_request_max_retries = 3
+
+# Request environment key where the Swift cache object is stored. When
+# auth_token middleware is deployed with a Swift cache, use this option to have
+# the middleware share a caching backend with swift. Otherwise, use the
+# ``memcached_servers`` option instead. (string value)
+#cache = <None>
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# The region in which the identity server can be found. (string value)
+#region_name = <None>
+
+# DEPRECATED: Directory used to cache files related to PKI tokens. This option
+# has been deprecated in the Ocata release and will be removed in the P
+# release. (string value)
+# This option is deprecated for removal since Ocata.
+# Its value may be silently ignored in the future.
+# Reason: PKI token format is no longer supported.
+#signing_dir = <None>
+
+# Optionally specify a list of memcached server(s) to use for caching. If left
+# undefined, tokens will instead be cached in-process. (list value)
+# Deprecated group/name - [keystone_authtoken]/memcache_servers
+#memcached_servers = <None>
+
+# In order to prevent excessive effort spent validating tokens, the middleware
+# caches previously-seen tokens for a configurable duration (in seconds). Set
+# to -1 to disable caching completely. (integer value)
+#token_cache_time = 300
+
+# DEPRECATED: Determines the frequency at which the list of revoked tokens is
+# retrieved from the Identity service (in seconds). A high number of revocation
+# events combined with a low cache duration may significantly reduce
+# performance. Only valid for PKI tokens. This option has been deprecated in
+# the Ocata release and will be removed in the P release. (integer value)
+# This option is deprecated for removal since Ocata.
+# Its value may be silently ignored in the future.
+# Reason: PKI token format is no longer supported.
+#revocation_cache_time = 10
+
+# (Optional) If defined, indicate whether token data should be authenticated or
+# authenticated and encrypted. If MAC, token data is authenticated (with HMAC)
+# in the cache. If ENCRYPT, token data is encrypted and authenticated in the
+# cache. If the value is not one of these options or empty, auth_token will
+# raise an exception on initialization. (string value)
+# Allowed values: None, MAC, ENCRYPT
+#memcache_security_strategy = None
+
+# (Optional, mandatory if memcache_security_strategy is defined) This string is
+# used for key derivation. (string value)
+#memcache_secret_key = <None>
+
+# (Optional) Number of seconds memcached server is considered dead before it is
+# tried again. (integer value)
+#memcache_pool_dead_retry = 300
+
+# (Optional) Maximum total number of open connections to every memcached
+# server. (integer value)
+#memcache_pool_maxsize = 10
+
+# (Optional) Socket timeout in seconds for communicating with a memcached
+# server. (integer value)
+#memcache_pool_socket_timeout = 3
+
+# (Optional) Number of seconds a connection to memcached is held unused in the
+# pool before it is closed. (integer value)
+#memcache_pool_unused_timeout = 60
+
+# (Optional) Number of seconds that an operation will wait to get a memcached
+# client connection from the pool. (integer value)
+#memcache_pool_conn_get_timeout = 10
+
+# (Optional) Use the advanced (eventlet safe) memcached client pool. The
+# advanced pool will only work under python 2.x. (boolean value)
+#memcache_use_advanced_pool = false
+
+# (Optional) Indicate whether to set the X-Service-Catalog header. If False,
+# middleware will not ask for service catalog on token validation and will not
+# set the X-Service-Catalog header. (boolean value)
+#include_service_catalog = true
+
+# Used to control the use and type of token binding. Can be set to: "disabled"
+# to not check token binding. "permissive" (default) to validate binding
+# information if the bind type is of a form known to the server and ignore it
+# if not. "strict" like "permissive" but if the bind type is unknown the token
+# will be rejected. "required" any form of token binding is needed to be
+# allowed. Finally the name of a binding method that must be present in tokens.
+# (string value)
+#enforce_token_bind = permissive
+
+# DEPRECATED: If true, the revocation list will be checked for cached tokens.
+# This requires that PKI tokens are configured on the identity server. (boolean
+# value)
+# This option is deprecated for removal since Ocata.
+# Its value may be silently ignored in the future.
+# Reason: PKI token format is no longer supported.
+#check_revocations_for_cached = false
+
+# DEPRECATED: Hash algorithms to use for hashing PKI tokens. This may be a
+# single algorithm or multiple. The algorithms are those supported by Python
+# standard hashlib.new(). The hashes will be tried in the order given, so put
+# the preferred one first for performance. The result of the first hash will be
+# stored in the cache. This will typically be set to multiple values only while
+# migrating from a less secure algorithm to a more secure one. Once all the old
+# tokens are expired this option should be set to a single value for better
+# performance. (list value)
+# This option is deprecated for removal since Ocata.
+# Its value may be silently ignored in the future.
+# Reason: PKI token format is no longer supported.
+#hash_algorithms = md5
+
+# A choice of roles that must be present in a service token. Service tokens are
+# allowed to request that an expired token can be used and so this check should
+# tightly control that only actual services should be sending this token. Roles
+# here are applied as an ANY check so any role in this list must be present.
+# For backwards compatibility reasons this currently only affects the
+# allow_expired check. (list value)
+#service_token_roles = service
+
+# For backwards compatibility reasons we must let valid service tokens pass
+# that don't pass the service_token_roles check as valid. Setting this true
+# will become the default in a future release and should be enabled if
+# possible. (boolean value)
+#service_token_roles_required = false
+
+# Authentication type to load (string value)
+# Deprecated group/name - [keystone_authtoken]/auth_plugin
+#auth_type = <None>
+
+# Config Section from which to load plugin specific options (string value)
+#auth_section = <None>
+
+
+[matchmaker_redis]
+
+#
+# From oslo.messaging
+#
+
+# DEPRECATED: Host to locate redis. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#host = 127.0.0.1
+
+# DEPRECATED: Use this port to connect to redis host. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#port = 6379
+
+# DEPRECATED: Password for Redis server (optional). (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#password =
+
+# DEPRECATED: List of Redis Sentinel hosts (fault tolerance mode), e.g.,
+# [host:port, host1:port ... ] (list value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#sentinel_hosts =
+
+# Redis replica set name. (string value)
+#sentinel_group_name = oslo-messaging-zeromq
+
+# Time in ms to wait between connection attempts. (integer value)
+#wait_timeout = 2000
+
+# Time in ms to wait before the transaction is killed. (integer value)
+#check_timeout = 20000
+
+# Timeout in ms on blocking socket operations. (integer value)
+#socket_timeout = 10000
+
+
+[meter]
+
+#
+# From ceilometer
+#
+
+# Configuration file for defining meter notifications. (string value)
+#meter_definitions_cfg_file = meters.yaml
+
+
+[notification]
+
+#
+# From ceilometer
+#
+
+# Number of queues to parallelize workload across. This value should be larger
+# than the number of active notification agents for optimal results. WARNING:
+# Once set, lowering this value may result in lost data. (integer value)
+# Minimum value: 1
+#pipeline_processing_queues = 10
+
+# Acknowledge message when event persistence fails. (boolean value)
+# Deprecated group/name - [collector]/ack_on_event_error
+#ack_on_event_error = true
+
+# Enable workload partitioning, allowing multiple notification agents to be run
+# simultaneously. (boolean value)
+#workload_partitioning = false
+
+# Messaging URLs to listen for notifications. Example:
+# rabbit://user:pass@host1:port1[,user:pass@hostN:portN]/virtual_host
+# (DEFAULT/transport_url is used if empty). This is useful when you have
+# dedicate messaging nodes for each service, for example, all nova
+# notifications go to rabbit-nova:5672, while all cinder notifications go to
+# rabbit-cinder:5672. (multi valued)
+#messaging_urls =
+
+# Number of notification messages to wait before publishing them. Batching is
+# advised when transformations are applied in pipeline. (integer value)
+# Minimum value: 1
+#batch_size = 100
+
+# Number of seconds to wait before publishing samples when batch_size is not
+# reached (None means indefinitely) (integer value)
+#batch_timeout = 5
+
+# Number of workers for notification service, default value is 1. (integer
+# value)
+# Minimum value: 1
+# Deprecated group/name - [DEFAULT]/notification_workers
+#workers = 1
+
+
+[oslo_concurrency]
+
+#
+# From oslo.concurrency
+#
+
+# Enables or disables inter-process locks. (boolean value)
+# Deprecated group/name - [DEFAULT]/disable_process_locking
+#disable_process_locking = false
+
+# Directory to use for lock files. For security, the specified directory
+# should only be writable by the user running the processes that need locking.
+# Defaults to environment variable OSLO_LOCK_PATH. If external locks are used,
+# a lock path must be set. (string value)
+# Deprecated group/name - [DEFAULT]/lock_path
+#lock_path = <None>
+
+
+[oslo_messaging_amqp]
+
+#
+# From oslo.messaging
+#
+
+# Name for the AMQP container. must be globally unique. Defaults to a generated
+# UUID (string value)
+# Deprecated group/name - [amqp1]/container_name
+#container_name = <None>
+
+# Timeout for inactive connections (in seconds) (integer value)
+# Deprecated group/name - [amqp1]/idle_timeout
+#idle_timeout = 0
+
+# Debug: dump AMQP frames to stdout (boolean value)
+# Deprecated group/name - [amqp1]/trace
+#trace = false
+
+# CA certificate PEM file used to verify the server's certificate (string
+# value)
+# Deprecated group/name - [amqp1]/ssl_ca_file
+#ssl_ca_file =
+
+# Self-identifying certificate PEM file for client authentication (string
+# value)
+# Deprecated group/name - [amqp1]/ssl_cert_file
+#ssl_cert_file =
+
+# Private key PEM file used to sign ssl_cert_file certificate (optional)
+# (string value)
+# Deprecated group/name - [amqp1]/ssl_key_file
+#ssl_key_file =
+
+# Password for decrypting ssl_key_file (if encrypted) (string value)
+# Deprecated group/name - [amqp1]/ssl_key_password
+#ssl_key_password = <None>
+
+# DEPRECATED: Accept clients using either SSL or plain TCP (boolean value)
+# Deprecated group/name - [amqp1]/allow_insecure_clients
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Not applicable - not a SSL server
+#allow_insecure_clients = false
+
+# Space separated list of acceptable SASL mechanisms (string value)
+# Deprecated group/name - [amqp1]/sasl_mechanisms
+#sasl_mechanisms =
+
+# Path to directory that contains the SASL configuration (string value)
+# Deprecated group/name - [amqp1]/sasl_config_dir
+#sasl_config_dir =
+
+# Name of configuration file (without .conf suffix) (string value)
+# Deprecated group/name - [amqp1]/sasl_config_name
+#sasl_config_name =
+
+# User name for message broker authentication (string value)
+# Deprecated group/name - [amqp1]/username
+#username =
+
+# Password for message broker authentication (string value)
+# Deprecated group/name - [amqp1]/password
+#password =
+
+# Seconds to pause before attempting to re-connect. (integer value)
+# Minimum value: 1
+#connection_retry_interval = 1
+
+# Increase the connection_retry_interval by this many seconds after each
+# unsuccessful failover attempt. (integer value)
+# Minimum value: 0
+#connection_retry_backoff = 2
+
+# Maximum limit for connection_retry_interval + connection_retry_backoff
+# (integer value)
+# Minimum value: 1
+#connection_retry_interval_max = 30
+
+# Time to pause between re-connecting an AMQP 1.0 link that failed due to a
+# recoverable error. (integer value)
+# Minimum value: 1
+#link_retry_delay = 10
+
+# The maximum number of attempts to re-send a reply message which failed due to
+# a recoverable error. (integer value)
+# Minimum value: -1
+#default_reply_retry = 0
+
+# The deadline for an rpc reply message delivery. (integer value)
+# Minimum value: 5
+#default_reply_timeout = 30
+
+# The deadline for an rpc cast or call message delivery. Only used when caller
+# does not provide a timeout expiry. (integer value)
+# Minimum value: 5
+#default_send_timeout = 30
+
+# The deadline for a sent notification message delivery. Only used when caller
+# does not provide a timeout expiry. (integer value)
+# Minimum value: 5
+#default_notify_timeout = 30
+
+# The duration to schedule a purge of idle sender links. Detach link after
+# expiry. (integer value)
+# Minimum value: 1
+#default_sender_link_timeout = 600
+
+# Indicates the addressing mode used by the driver.
+# Permitted values:
+# 'legacy' - use legacy non-routable addressing
+# 'routable' - use routable addresses
+# 'dynamic' - use legacy addresses if the message bus does not support routing
+# otherwise use routable addressing (string value)
+#addressing_mode = dynamic
+
+# address prefix used when sending to a specific server (string value)
+# Deprecated group/name - [amqp1]/server_request_prefix
+#server_request_prefix = exclusive
+
+# address prefix used when broadcasting to all servers (string value)
+# Deprecated group/name - [amqp1]/broadcast_prefix
+#broadcast_prefix = broadcast
+
+# address prefix when sending to any server in group (string value)
+# Deprecated group/name - [amqp1]/group_request_prefix
+#group_request_prefix = unicast
+
+# Address prefix for all generated RPC addresses (string value)
+#rpc_address_prefix = openstack.org/om/rpc
+
+# Address prefix for all generated Notification addresses (string value)
+#notify_address_prefix = openstack.org/om/notify
+
+# Appended to the address prefix when sending a fanout message. Used by the
+# message bus to identify fanout messages. (string value)
+#multicast_address = multicast
+
+# Appended to the address prefix when sending to a particular RPC/Notification
+# server. Used by the message bus to identify messages sent to a single
+# destination. (string value)
+#unicast_address = unicast
+
+# Appended to the address prefix when sending to a group of consumers. Used by
+# the message bus to identify messages that should be delivered in a round-
+# robin fashion across consumers. (string value)
+#anycast_address = anycast
+
+# Exchange name used in notification addresses.
+# Exchange name resolution precedence:
+# Target.exchange if set
+# else default_notification_exchange if set
+# else control_exchange if set
+# else 'notify' (string value)
+#default_notification_exchange = <None>
+
+# Exchange name used in RPC addresses.
+# Exchange name resolution precedence:
+# Target.exchange if set
+# else default_rpc_exchange if set
+# else control_exchange if set
+# else 'rpc' (string value)
+#default_rpc_exchange = <None>
+
+# Window size for incoming RPC Reply messages. (integer value)
+# Minimum value: 1
+#reply_link_credit = 200
+
+# Window size for incoming RPC Request messages (integer value)
+# Minimum value: 1
+#rpc_server_credit = 100
+
+# Window size for incoming Notification messages (integer value)
+# Minimum value: 1
+#notify_server_credit = 100
+
+# Send messages of this type pre-settled.
+# Pre-settled messages will not receive acknowledgement
+# from the peer. Note well: pre-settled messages may be
+# silently discarded if the delivery fails.
+# Permitted values:
+# 'rpc-call' - send RPC Calls pre-settled
+# 'rpc-reply'- send RPC Replies pre-settled
+# 'rpc-cast' - Send RPC Casts pre-settled
+# 'notify' - Send Notifications pre-settled
+# (multi valued)
+#pre_settled = rpc-cast
+#pre_settled = rpc-reply
+
+
+[oslo_messaging_kafka]
+
+#
+# From oslo.messaging
+#
+
+# DEPRECATED: Default Kafka broker Host (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#kafka_default_host = localhost
+
+# DEPRECATED: Default Kafka broker Port (port value)
+# Minimum value: 0
+# Maximum value: 65535
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#kafka_default_port = 9092
+
+# Max fetch bytes of Kafka consumer (integer value)
+#kafka_max_fetch_bytes = 1048576
+
+# Default timeout(s) for Kafka consumers (integer value)
+#kafka_consumer_timeout = 1.0
+
+# Pool Size for Kafka Consumers (integer value)
+#pool_size = 10
+
+# The pool size limit for connections expiration policy (integer value)
+#conn_pool_min_size = 2
+
+# The time-to-live in sec of idle connections in the pool (integer value)
+#conn_pool_ttl = 1200
+
+# Group id for Kafka consumer. Consumers in one group will coordinate message
+# consumption (string value)
+#consumer_group = oslo_messaging_consumer
+
+# Upper bound on the delay for KafkaProducer batching in seconds (floating
+# point value)
+#producer_batch_timeout = 0.0
+
+# Size of batch for the producer async send (integer value)
+#producer_batch_size = 16384
+
+
+[oslo_messaging_notifications]
+
+#
+# From oslo.messaging
+#
+
+# The Drivers(s) to handle sending notifications. Possible values are
+# messaging, messagingv2, routing, log, test, noop (multi valued)
+# Deprecated group/name - [DEFAULT]/notification_driver
+#driver =
+
+# A URL representing the messaging driver to use for notifications. If not set,
+# we fall back to the same configuration used for RPC. (string value)
+# Deprecated group/name - [DEFAULT]/notification_transport_url
+#transport_url = <None>
+
+# AMQP topic used for OpenStack notifications. (list value)
+# Deprecated group/name - [rpc_notifier2]/topics
+# Deprecated group/name - [DEFAULT]/notification_topics
+#topics = notifications
+topics = notifications
+
+
+[oslo_messaging_rabbit]
+
+#
+# From oslo.messaging
+#
+
+# Use durable queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/amqp_durable_queues
+# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
+#amqp_durable_queues = false
+
+# Auto-delete queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/amqp_auto_delete
+#amqp_auto_delete = false
+
+# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
+# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
+# distributions. (string value)
+# Deprecated group/name - [DEFAULT]/kombu_ssl_version
+#kombu_ssl_version =
+
+# SSL key file (valid only if SSL enabled). (string value)
+# Deprecated group/name - [DEFAULT]/kombu_ssl_keyfile
+#kombu_ssl_keyfile =
+
+# SSL cert file (valid only if SSL enabled). (string value)
+# Deprecated group/name - [DEFAULT]/kombu_ssl_certfile
+#kombu_ssl_certfile =
+
+# SSL certification authority file (valid only if SSL enabled). (string value)
+# Deprecated group/name - [DEFAULT]/kombu_ssl_ca_certs
+#kombu_ssl_ca_certs =
+
+# How long to wait before reconnecting in response to an AMQP consumer cancel
+# notification. (floating point value)
+# Deprecated group/name - [DEFAULT]/kombu_reconnect_delay
+#kombu_reconnect_delay = 1.0
+
+# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not
+# be used. This option may not be available in future versions. (string value)
+#kombu_compression = <None>
+
+# How long to wait a missing client before abandoning to send it its replies.
+# This value should not be longer than rpc_response_timeout. (integer value)
+# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
+#kombu_missing_consumer_retry_timeout = 60
+
+# Determines how the next RabbitMQ node is chosen in case the one we are
+# currently connected to becomes unavailable. Takes effect only if more than
+# one RabbitMQ node is provided in config. (string value)
+# Allowed values: round-robin, shuffle
+#kombu_failover_strategy = round-robin
+
+# DEPRECATED: The RabbitMQ broker address where a single node is used. (string
+# value)
+# Deprecated group/name - [DEFAULT]/rabbit_host
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_host = localhost
+
+# DEPRECATED: The RabbitMQ broker port where a single node is used. (port
+# value)
+# Minimum value: 0
+# Maximum value: 65535
+# Deprecated group/name - [DEFAULT]/rabbit_port
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_port = 5672
+
+# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
+# Deprecated group/name - [DEFAULT]/rabbit_hosts
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_hosts = $rabbit_host:$rabbit_port
+
+# Connect over SSL for RabbitMQ. (boolean value)
+# Deprecated group/name - [DEFAULT]/rabbit_use_ssl
+#rabbit_use_ssl = false
+
+# DEPRECATED: The RabbitMQ userid. (string value)
+# Deprecated group/name - [DEFAULT]/rabbit_userid
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_userid = guest
+
+# DEPRECATED: The RabbitMQ password. (string value)
+# Deprecated group/name - [DEFAULT]/rabbit_password
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_password = guest
+
+# The RabbitMQ login method. (string value)
+# Allowed values: PLAIN, AMQPLAIN, RABBIT-CR-DEMO
+# Deprecated group/name - [DEFAULT]/rabbit_login_method
+#rabbit_login_method = AMQPLAIN
+
+# DEPRECATED: The RabbitMQ virtual host. (string value)
+# Deprecated group/name - [DEFAULT]/rabbit_virtual_host
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_virtual_host = /
+
+# How frequently to retry connecting with RabbitMQ. (integer value)
+#rabbit_retry_interval = 1
+
+# How long to backoff for between retries when connecting to RabbitMQ. (integer
+# value)
+# Deprecated group/name - [DEFAULT]/rabbit_retry_backoff
+#rabbit_retry_backoff = 2
+
+# Maximum interval of RabbitMQ connection retries. Default is 30 seconds.
+# (integer value)
+#rabbit_interval_max = 30
+
+# DEPRECATED: Maximum number of RabbitMQ connection retries. Default is 0
+# (infinite retry count). (integer value)
+# Deprecated group/name - [DEFAULT]/rabbit_max_retries
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#rabbit_max_retries = 0
+
+# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this
+# option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring
+# is no longer controlled by the x-ha-policy argument when declaring a queue.
+# If you just want to make sure that all queues (except those with auto-
+# generated names) are mirrored across all nodes, run: "rabbitmqctl set_policy
+# HA '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value)
+# Deprecated group/name - [DEFAULT]/rabbit_ha_queues
+#rabbit_ha_queues = false
+
+# Positive integer representing duration in seconds for queue TTL (x-expires).
+# Queues which are unused for the duration of the TTL are automatically
+# deleted. The parameter affects only reply and fanout queues. (integer value)
+# Minimum value: 1
+#rabbit_transient_queues_ttl = 1800
+
+# Specifies the number of messages to prefetch. Setting to zero allows
+# unlimited messages. (integer value)
+#rabbit_qos_prefetch_count = 64
+
+# Number of seconds after which the Rabbit broker is considered down if
+# heartbeat's keep-alive fails (0 disable the heartbeat). EXPERIMENTAL (integer
+# value)
+#heartbeat_timeout_threshold = 60
+
+# How often times during the heartbeat_timeout_threshold we check the
+# heartbeat. (integer value)
+#heartbeat_rate = 2
+
+# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake (boolean value)
+# Deprecated group/name - [DEFAULT]/fake_rabbit
+#fake_rabbit = false
+
+# Maximum number of channels to allow (integer value)
+#channel_max = <None>
+
+# The maximum byte size for an AMQP frame (integer value)
+#frame_max = <None>
+
+# How often to send heartbeats for consumer's connections (integer value)
+#heartbeat_interval = 3
+
+# Enable SSL (boolean value)
+#ssl = <None>
+
+# Arguments passed to ssl.wrap_socket (dict value)
+#ssl_options = <None>
+
+# Set socket timeout in seconds for connection's socket (floating point value)
+#socket_timeout = 0.25
+
+# Set TCP_USER_TIMEOUT in seconds for connection's socket (floating point
+# value)
+#tcp_user_timeout = 0.25
+
+# Set delay for reconnection to some host which has connection error (floating
+# point value)
+#host_connection_reconnect_delay = 0.25
+
+# Connection factory implementation (string value)
+# Allowed values: new, single, read_write
+#connection_factory = single
+
+# Maximum number of connections to keep queued. (integer value)
+#pool_max_size = 30
+
+# Maximum number of connections to create above `pool_max_size`. (integer
+# value)
+#pool_max_overflow = 0
+
+# Default number of seconds to wait for a connections to available (integer
+# value)
+#pool_timeout = 30
+
+# Lifetime of a connection (since creation) in seconds or None for no
+# recycling. Expired connections are closed on acquire. (integer value)
+#pool_recycle = 600
+
+# Threshold at which inactive (since release) connections are considered stale
+# in seconds or None for no staleness. Stale connections are closed on acquire.
+# (integer value)
+#pool_stale = 60
+
+# Default serialization mechanism for serializing/deserializing
+# outgoing/incoming messages (string value)
+# Allowed values: json, msgpack
+#default_serializer_type = json
+
+# Persist notification messages. (boolean value)
+#notification_persistence = false
+
+# Exchange name for sending notifications (string value)
+#default_notification_exchange = ${control_exchange}_notification
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# notification listener. (integer value)
+#notification_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during sending
+# notification, -1 means infinite retry. (integer value)
+#default_notification_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during sending
+# notification message (floating point value)
+#notification_retry_delay = 0.25
+
+# Time to live for rpc queues without consumers in seconds. (integer value)
+#rpc_queue_expiration = 60
+
+# Exchange name for sending RPC messages (string value)
+#default_rpc_exchange = ${control_exchange}_rpc
+
+# Exchange name for receiving RPC replies (string value)
+#rpc_reply_exchange = ${control_exchange}_rpc_reply
+
+# Max number of not acknowledged message which RabbitMQ can send to rpc
+# listener. (integer value)
+#rpc_listener_prefetch_count = 100
+
+# Max number of not acknowledged message which RabbitMQ can send to rpc reply
+# listener. (integer value)
+#rpc_reply_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during sending
+# reply. -1 means infinite retry during rpc_timeout (integer value)
+#rpc_reply_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during sending
+# reply. (floating point value)
+#rpc_reply_retry_delay = 0.25
+
+# Reconnecting retry count in case of connectivity problem during sending RPC
+# message, -1 means infinite retry. If actual retry attempts in not 0 the rpc
+# request could be processed more than one time (integer value)
+#default_rpc_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during sending RPC
+# message (floating point value)
+#rpc_retry_delay = 0.25
+
+
+[oslo_messaging_zmq]
+
+#
+# From oslo.messaging
+#
+
+# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
+# The "host" option should point or resolve to this address. (string value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_bind_address
+#rpc_zmq_bind_address = *
+
+# MatchMaker driver. (string value)
+# Allowed values: redis, sentinel, dummy
+# Deprecated group/name - [DEFAULT]/rpc_zmq_matchmaker
+#rpc_zmq_matchmaker = redis
+
+# Number of ZeroMQ contexts, defaults to 1. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_contexts
+#rpc_zmq_contexts = 1
+
+# Maximum number of ingress messages to locally buffer per topic. Default is
+# unlimited. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_topic_backlog
+#rpc_zmq_topic_backlog = <None>
+
+# Directory for holding IPC sockets. (string value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_ipc_dir
+#rpc_zmq_ipc_dir = /var/run/openstack
+
+# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
+# "host" option, if running Nova. (string value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_host
+#rpc_zmq_host = localhost
+
+# Number of seconds to wait before all pending messages will be sent after
+# closing a socket. The default value of -1 specifies an infinite linger
+# period. The value of 0 specifies no linger period. Pending messages shall be
+# discarded immediately when the socket is closed. Positive values specify an
+# upper bound for the linger period. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
+#zmq_linger = -1
+
+# The default number of seconds that poll should wait. Poll raises timeout
+# exception when timeout expired. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_poll_timeout
+#rpc_poll_timeout = 1
+
+# Expiration timeout in seconds of a name service record about existing target
+# ( < 0 means no timeout). (integer value)
+# Deprecated group/name - [DEFAULT]/zmq_target_expire
+#zmq_target_expire = 300
+
+# Update period in seconds of a name service record about existing target.
+# (integer value)
+# Deprecated group/name - [DEFAULT]/zmq_target_update
+#zmq_target_update = 180
+
+# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
+# value)
+# Deprecated group/name - [DEFAULT]/use_pub_sub
+#use_pub_sub = false
+
+# Use ROUTER remote proxy. (boolean value)
+# Deprecated group/name - [DEFAULT]/use_router_proxy
+#use_router_proxy = false
+
+# This option makes direct connections dynamic or static. It makes sense only
+# with use_router_proxy=False which means to use direct connections for direct
+# message types (ignored otherwise). (boolean value)
+#use_dynamic_connections = false
+
+# How many additional connections to a host will be made for failover reasons.
+# This option is actual only in dynamic connections mode. (integer value)
+#zmq_failover_connections = 2
+
+# Minimal port number for random ports range. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+# Deprecated group/name - [DEFAULT]/rpc_zmq_min_port
+#rpc_zmq_min_port = 49153
+
+# Maximal port number for random ports range. (integer value)
+# Minimum value: 1
+# Maximum value: 65536
+# Deprecated group/name - [DEFAULT]/rpc_zmq_max_port
+#rpc_zmq_max_port = 65536
+
+# Number of retries to find free port number before fail with ZMQBindError.
+# (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_zmq_bind_port_retries
+#rpc_zmq_bind_port_retries = 100
+
+# Default serialization mechanism for serializing/deserializing
+# outgoing/incoming messages (string value)
+# Allowed values: json, msgpack
+# Deprecated group/name - [DEFAULT]/rpc_zmq_serialization
+#rpc_zmq_serialization = json
+
+# This option configures round-robin mode in zmq socket. True means not keeping
+# a queue when server side disconnects. False means to keep queue and messages
+# even if server is disconnected, when the server appears we send all
+# accumulated messages to it. (boolean value)
+#zmq_immediate = true
+
+# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
+# other negative value) means to skip any overrides and leave it to OS default;
+# 0 and 1 (or any other positive value) mean to disable and enable the option
+# respectively. (integer value)
+#zmq_tcp_keepalive = -1
+
+# The duration between two keepalive transmissions in idle condition. The unit
+# is platform dependent, for example, seconds in Linux, milliseconds in Windows
+# etc. The default value of -1 (or any other negative value and 0) means to
+# skip any overrides and leave it to OS default. (integer value)
+#zmq_tcp_keepalive_idle = -1
+
+# The number of retransmissions to be carried out before declaring that remote
+# end is not available. The default value of -1 (or any other negative value
+# and 0) means to skip any overrides and leave it to OS default. (integer
+# value)
+#zmq_tcp_keepalive_cnt = -1
+
+# The duration between two successive keepalive retransmissions, if
+# acknowledgement to the previous keepalive transmission is not received. The
+# unit is platform dependent, for example, seconds in Linux, milliseconds in
+# Windows etc. The default value of -1 (or any other negative value and 0)
+# means to skip any overrides and leave it to OS default. (integer value)
+#zmq_tcp_keepalive_intvl = -1
+
+# Maximum number of (green) threads to work concurrently. (integer value)
+#rpc_thread_pool_size = 100
+
+# Expiration timeout in seconds of a sent/received message after which it is
+# not tracked anymore by a client/server. (integer value)
+#rpc_message_ttl = 300
+
+# Wait for message acknowledgements from receivers. This mechanism works only
+# via proxy without PUB/SUB. (boolean value)
+#rpc_use_acks = false
+
+# Number of seconds to wait for an ack from a cast/call. After each retry
+# attempt this timeout is multiplied by some specified multiplier. (integer
+# value)
+#rpc_ack_timeout_base = 15
+
+# Number to multiply base ack timeout by after each retry attempt. (integer
+# value)
+#rpc_ack_timeout_multiplier = 2
+
+# Default number of message sending attempts in case of any problems occurred:
+# positive value N means at most N retries, 0 means no retries, None or -1 (or
+# any other negative values) mean to retry forever. This option is used only if
+# acknowledgments are enabled. (integer value)
+#rpc_retry_attempts = 3
+
+# List of publisher hosts SubConsumer can subscribe on. This option has higher
+# priority then the default publishers list taken from the matchmaker. (list
+# value)
+#subscribe_on =
+
+
+[oslo_middleware]
+
+#
+# From oslo.middleware.http_proxy_to_wsgi
+#
+
+# Whether the application is behind a proxy or not. This determines if the
+# middleware should parse the headers or not. (boolean value)
+#enable_proxy_headers_parsing = false
+
+
+[oslo_policy]
+
+#
+# From oslo.policy
+#
+
+# The file that defines policies. (string value)
+# Deprecated group/name - [DEFAULT]/policy_file
+#policy_file = policy.json
+
+# Default rule. Enforced when a requested rule is not found. (string value)
+# Deprecated group/name - [DEFAULT]/policy_default_rule
+#policy_default_rule = default
+
+# Directories where policy configuration files are stored. They can be relative
+# to any directory in the search path defined by the config_dir option, or
+# absolute paths. The file defined by policy_file must exist for these
+# directories to be searched. Missing or empty directories are ignored. (multi
+# valued)
+# Deprecated group/name - [DEFAULT]/policy_dirs
+#policy_dirs = policy.d
+
+
+[polling]
+
+#
+# From ceilometer
+#
+
+# Configuration file for pipeline definition. (string value)
+#cfg_file = polling.yaml
+
+# Work-load partitioning group prefix. Use only if you want to run multiple
+# polling agents with different config files. For each sub-group of the agent
+# pool with the same partitioning_group_prefix a disjoint subset of pollsters
+# should be loaded. (string value)
+# Deprecated group/name - [central]/partitioning_group_prefix
+#partitioning_group_prefix = <None>
+
+
+[publisher]
+
+#
+# From ceilometer
+#
+
+# Secret value for signing messages. Set value empty if signing is not required
+# to avoid computational overhead. (string value)
+# Deprecated group/name - [DEFAULT]/metering_secret
+# Deprecated group/name - [publisher_rpc]/metering_secret
+# Deprecated group/name - [publisher]/metering_secret
+#telemetry_secret = change this for valid signing
+
+
+[publisher_notifier]
+
+#
+# From ceilometer
+#
+
+# The topic that ceilometer uses for metering notifications. (string value)
+#metering_topic = metering
+
+# The topic that ceilometer uses for event notifications. (string value)
+#event_topic = event
+
+# The driver that ceilometer uses for metering notifications. (string value)
+# Deprecated group/name - [publisher_notifier]/metering_driver
+#telemetry_driver = messagingv2
+
+
+[rgw_admin_credentials]
+
+#
+# From ceilometer
+#
+
+# Access key for Radosgw Admin. (string value)
+#access_key = <None>
+
+# Secret key for Radosgw Admin. (string value)
+#secret_key = <None>
+
+
+[service_credentials]
+
+auth_type = password
+user_domain_id = {{ server.identity.get('domain', 'default') }}
+project_domain_id = {{ server.identity.get('domain', 'default') }}
+project_name = {{ server.identity.tenant }}
+username = {{ server.identity.user }}
+password = {{ server.identity.password }}
+auth_url = http://{{ server.identity.host }}:5000
+token_cache_time = -1
+interface = internal
+region_name = {{ server.get('region', 'RegionOne') }}
+
+#
+# From ceilometer-auth
+#
+
+# Authentication type to load (string value)
+# Deprecated group/name - [service_credentials]/auth_plugin
+#auth_type = <None>
+
+# Config Section from which to load plugin specific options (string value)
+#auth_section = <None>
+
+# Authentication URL (string value)
+#auth_url = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Project ID to scope to (string value)
+# Deprecated group/name - [service_credentials]/tenant-id
+#project_id = <None>
+
+# Project name to scope to (string value)
+# Deprecated group/name - [service_credentials]/tenant-name
+#project_name = <None>
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used
+# for both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# User id (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [service_credentials]/user-name
+#username = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
+# User's password (string value)
+#password = <None>
+
+# Region name to use for OpenStack service endpoints. (string value)
+# Deprecated group/name - [DEFAULT]/os_region_name
+#region_name = <None>
+
+# Type of endpoint in Identity service catalog to use for communication with
+# OpenStack services. (string value)
+# Allowed values: public, internal, admin, auth, publicURL, internalURL, adminURL
+# Deprecated group/name - [service_credentials]/os_endpoint_type
+#interface = public
+
+
+[service_types]
+
+#
+# From ceilometer
+#
+
+# Kwapi service type. (string value)
+#kwapi = energy
+
+# Glance service type. (string value)
+#glance = image
+
+# Neutron service type. (string value)
+#neutron = network
+
+# Neutron load balancer version. (string value)
+# Allowed values: v1, v2
+#neutron_lbaas_version = v2
+
+# Nova service type. (string value)
+#nova = compute
+
+# Radosgw service type. (string value)
+#radosgw = <None>
+
+# Swift service type. (string value)
+#swift = object-store
+
+# Cinder service type. (string value)
+# Deprecated group/name - [service_types]/cinderv2
+#cinder = volumev3
+
+
+[storage]
+
+#
+# From ceilometer
+#
+
+# Maximum number of connection retries during startup. Set to -1 to specify an
+# infinite retry count. (integer value)
+# Deprecated group/name - [database]/max_retries
+#max_retries = 10
+
+# Interval (in seconds) between retries of connection. (integer value)
+# Deprecated group/name - [database]/retry_interval
+#retry_interval = 10
+
+
+[vmware]
+
+#
+# From ceilometer
+#
+
+# IP address of the VMware vSphere host. (string value)
+#host_ip =
+
+# Port of the VMware vSphere host. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#host_port = 443
+
+# Username of VMware vSphere. (string value)
+#host_username =
+
+# Password of VMware vSphere. (string value)
+#host_password =
+
+# CA bundle file to use in verifying the vCenter server certificate. (string
+# value)
+#ca_file = <None>
+
+# If true, the vCenter server certificate is not verified. If false, then the
+# default CA truststore is used for verification. This option is ignored if
+# "ca_file" is set. (boolean value)
+#insecure = false
+
+# Number of times a VMware vSphere API may be retried. (integer value)
+#api_retry_count = 10
+
+# Sleep time in seconds for polling an ongoing async task. (floating point
+# value)
+#task_poll_interval = 0.5
+
+# Optional vim service WSDL location e.g http://<server>/vimService.wsdl.
+# Optional over-ride to default location for bug work-arounds. (string value)
+#wsdl_location = <None>
+
+
+[xenapi]
+
+#
+# From ceilometer
+#
+
+# URL for connection to XenServer/Xen Cloud Platform. (string value)
+#connection_url = <None>
+
+# Username for connection to XenServer/Xen Cloud Platform. (string value)
+#connection_username = root
+
+# Password for connection to XenServer/Xen Cloud Platform. (string value)
+#connection_password = <None>
diff --git a/ceilometer/files/pike/ceilometer.apache2.conf.Debian b/ceilometer/files/pike/ceilometer.apache2.conf.Debian
new file mode 100644
index 0000000..44cea9b
--- /dev/null
+++ b/ceilometer/files/pike/ceilometer.apache2.conf.Debian
@@ -0,0 +1,14 @@
+{%- from "ceilometer/map.jinja" import server with context -%}
+Listen {{ server.bind.host }}:{{ server.bind.port }}
+
+<VirtualHost *:{{ server.bind.port }}>
+ WSGIDaemonProcess ceilometer-api processes=2 threads=10 user=ceilometer group=ceilometer display-name=%{GROUP}
+ WSGIProcessGroup ceilometer-api
+ WSGIScriptAlias / /usr/share/ceilometer/app.wsgi
+ WSGIApplicationGroup %{GLOBAL}
+ <IfVersion >= 2.4>
+ ErrorLogFormat "%{cu}t %M"
+ </IfVersion>
+ ErrorLog /var/log/apache2/ceilometer_error.log
+ CustomLog /var/log/apache2/ceilometer_access.log "%v:%p %h %l %u %t \"%r\" %>s %D %O \"%{Referer}i\" \"%{User-Agent}i\""
+</VirtualHost>
diff --git a/ceilometer/files/pike/compute_pipeline.yaml b/ceilometer/files/pike/compute_pipeline.yaml
new file mode 100644
index 0000000..e04dc9d
--- /dev/null
+++ b/ceilometer/files/pike/compute_pipeline.yaml
@@ -0,0 +1,26 @@
+{%- from "ceilometer/map.jinja" import server with context %}
+{%- from "ceilometer/map.jinja" import agent with context %}
+{%- if server.get('enabled', False) %}
+{%- set publisher = server.publisher %}
+{%- else %}
+{%- set publisher = agent.publisher %}
+{%- endif %}
+---
+sources:
+ - name: meter_source
+ interval: 60
+ meters:
+ - "*"
+ sinks:
+ - meter_sink
+sinks:
+ - name: meter_sink
+ transformers:
+ publishers:
+ {%- for publisher_name, publisher in publisher.items() %}
+ {%- if publisher_name == 'graphite' %}
+ - graphite://{{ publisher.host }}:{{ publisher.port }}
+ {%- else %}
+ - notifier://
+ {%- endif %}
+ {%- endfor %}
diff --git a/ceilometer/files/pike/event_definitions.yaml b/ceilometer/files/pike/event_definitions.yaml
new file mode 100644
index 0000000..d87e1dc
--- /dev/null
+++ b/ceilometer/files/pike/event_definitions.yaml
@@ -0,0 +1,585 @@
+---
+- event_type: 'compute.instance.*'
+ traits: &instance_traits
+ tenant_id:
+ fields: payload.tenant_id
+ user_id:
+ fields: payload.user_id
+ instance_id:
+ fields: payload.instance_id
+ resource_id:
+ fields: payload.instance_id
+ host:
+ fields: publisher_id.`split(., 1, 1)`
+ service:
+ fields: publisher_id.`split(., 0, -1)`
+ memory_mb:
+ type: int
+ fields: payload.memory_mb
+ disk_gb:
+ type: int
+ fields: payload.disk_gb
+ root_gb:
+ type: int
+ fields: payload.root_gb
+ ephemeral_gb:
+ type: int
+ fields: payload.ephemeral_gb
+ vcpus:
+ type: int
+ fields: payload.vcpus
+ instance_type_id:
+ type: int
+ fields: payload.instance_type_id
+ instance_type:
+ fields: payload.instance_type
+ state:
+ fields: payload.state
+ os_architecture:
+ fields: payload.image_meta.'org.openstack__1__architecture'
+ os_version:
+ fields: payload.image_meta.'org.openstack__1__os_version'
+ os_distro:
+ fields: payload.image_meta.'org.openstack__1__os_distro'
+ launched_at:
+ type: datetime
+ fields: payload.launched_at
+ deleted_at:
+ type: datetime
+ fields: payload.deleted_at
+- event_type: compute.instance.update
+ traits:
+ <<: *instance_traits
+ old_state:
+ fields: payload.old_state
+- event_type: compute.instance.exists
+ traits:
+ <<: *instance_traits
+ audit_period_beginning:
+ type: datetime
+ fields: payload.audit_period_beginning
+ audit_period_ending:
+ type: datetime
+ fields: payload.audit_period_ending
+- event_type: ['volume.exists', 'volume.create.*', 'volume.delete.*', 'volume.resize.*', 'volume.attach.*', 'volume.detach.*', 'volume.update.*', 'snapshot.exists', 'snapshot.create.*', 'snapshot.delete.*', 'snapshot.update.*']
+ traits: &cinder_traits
+ user_id:
+ fields: payload.user_id
+ project_id:
+ fields: payload.tenant_id
+ availability_zone:
+ fields: payload.availability_zone
+ display_name:
+ fields: payload.display_name
+ replication_status:
+ fields: payload.replication_status
+ status:
+ fields: payload.status
+ created_at:
+ fields: payload.created_at
+- event_type: ['volume.exists', 'volume.create.*', 'volume.delete.*', 'volume.resize.*', 'volume.attach.*', 'volume.detach.*', 'volume.update.*']
+ traits:
+ <<: *cinder_traits
+ resource_id:
+ fields: payload.volume_id
+ host:
+ fields: payload.host
+ size:
+ fields: payload.size
+ type:
+ fields: payload.volume_type
+ replication_status:
+ fields: payload.replication_status
+- event_type: ['snapshot.exists', 'snapshot.create.*', 'snapshot.delete.*', 'snapshot.update.*']
+ traits:
+ <<: *cinder_traits
+ resource_id:
+ fields: payload.snapshot_id
+ volume_id:
+ fields: payload.volume_id
+- event_type: ['image_volume_cache.*']
+ traits:
+ image_id:
+ fields: payload.image_id
+ host:
+ fields: payload.host
+- event_type: ['image.create', 'image.update', 'image.upload', 'image.delete']
+ traits: &glance_crud
+ project_id:
+ fields: payload.owner
+ resource_id:
+ fields: payload.id
+ name:
+ fields: payload.name
+ status:
+ fields: payload.status
+ created_at:
+ fields: payload.created_at
+ user_id:
+ fields: payload.owner
+ deleted_at:
+ fields: payload.deleted_at
+ size:
+ fields: payload.size
+- event_type: image.send
+ traits: &glance_send
+ receiver_project:
+ fields: payload.receiver_tenant_id
+ receiver_user:
+ fields: payload.receiver_user_id
+ user_id:
+ fields: payload.owner_id
+ image_id:
+ fields: payload.image_id
+ destination_ip:
+ fields: payload.destination_ip
+ bytes_sent:
+ type: int
+ fields: payload.bytes_sent
+- event_type: orchestration.stack.*
+ traits: &orchestration_crud
+ project_id:
+ fields: payload.tenant_id
+ user_id:
+ fields: ['_context_trustor_user_id', '_context_user_id']
+ resource_id:
+ fields: payload.stack_identity
+- event_type: sahara.cluster.*
+ traits: &sahara_crud
+ project_id:
+ fields: payload.project_id
+ user_id:
+ fields: _context_user_id
+ resource_id:
+ fields: payload.cluster_id
+- event_type: sahara.cluster.health
+ traits: &sahara_health
+ <<: *sahara_crud
+ verification_id:
+ fields: payload.verification_id
+ health_check_status:
+ fields: payload.health_check_status
+ health_check_name:
+ fields: payload.health_check_name
+ health_check_description:
+ fields: payload.health_check_description
+ created_at:
+ type: datetime
+ fields: payload.created_at
+ updated_at:
+ type: datetime
+ fields: payload.updated_at
+- event_type: ['identity.user.*', 'identity.project.*', 'identity.group.*', 'identity.role.*', 'identity.OS-TRUST:trust.*',
+ 'identity.region.*', 'identity.service.*', 'identity.endpoint.*', 'identity.policy.*']
+ traits: &identity_crud
+ resource_id:
+ fields: payload.resource_info
+ initiator_id:
+ fields: payload.initiator.id
+ project_id:
+ fields: payload.initiator.project_id
+ domain_id:
+ fields: payload.initiator.domain_id
+- event_type: identity.role_assignment.*
+ traits: &identity_role_assignment
+ role:
+ fields: payload.role
+ group:
+ fields: payload.group
+ domain:
+ fields: payload.domain
+ user:
+ fields: payload.user
+ project:
+ fields: payload.project
+- event_type: identity.authenticate
+ traits: &identity_authenticate
+ typeURI:
+ fields: payload.typeURI
+ id:
+ fields: payload.id
+ action:
+ fields: payload.action
+ eventType:
+ fields: payload.eventType
+ eventTime:
+ fields: payload.eventTime
+ outcome:
+ fields: payload.outcome
+ initiator_typeURI:
+ fields: payload.initiator.typeURI
+ initiator_id:
+ fields: payload.initiator.id
+ initiator_name:
+ fields: payload.initiator.name
+ initiator_host_agent:
+ fields: payload.initiator.host.agent
+ initiator_host_addr:
+ fields: payload.initiator.host.address
+ target_typeURI:
+ fields: payload.target.typeURI
+ target_id:
+ fields: payload.target.id
+ observer_typeURI:
+ fields: payload.observer.typeURI
+ observer_id:
+ fields: payload.observer.id
+- event_type: objectstore.http.request
+ traits: &objectstore_request
+ typeURI:
+ fields: payload.typeURI
+ id:
+ fields: payload.id
+ action:
+ fields: payload.action
+ eventType:
+ fields: payload.eventType
+ eventTime:
+ fields: payload.eventTime
+ outcome:
+ fields: payload.outcome
+ initiator_typeURI:
+ fields: payload.initiator.typeURI
+ initiator_id:
+ fields: payload.initiator.id
+ initiator_project_id:
+ fields: payload.initiator.project_id
+ target_typeURI:
+ fields: payload.target.typeURI
+ target_id:
+ fields: payload.target.id
+ target_action:
+ fields: payload.target.action
+ target_metadata_path:
+ fields: payload.target.metadata.path
+ target_metadata_version:
+ fields: payload.target.metadata.version
+ target_metadata_container:
+ fields: payload.target.metadata.container
+ target_metadata_object:
+ fields: payload.target.metadata.object
+ observer_id:
+ fields: payload.observer.id
+- event_type: ['network.*', 'subnet.*', 'port.*', 'router.*', 'floatingip.*', 'pool.*', 'vip.*', 'member.*', 'health_monitor.*', 'healthmonitor.*', 'listener.*', 'loadbalancer.*', 'firewall.*', 'firewall_policy.*', 'firewall_rule.*', 'vpnservice.*', 'ipsecpolicy.*', 'ikepolicy.*', 'ipsec_site_connection.*']
+ traits: &network_traits
+ user_id:
+ fields: _context_user_id
+ project_id:
+ fields: _context_tenant_id
+- event_type: network.*
+ traits:
+ <<: *network_traits
+ resource_id:
+ fields: ['payload.network.id', 'payload.id']
+- event_type: subnet.*
+ traits:
+ <<: *network_traits
+ resource_id:
+ fields: ['payload.subnet.id', 'payload.id']
+- event_type: port.*
+ traits:
+ <<: *network_traits
+ resource_id:
+ fields: ['payload.port.id', 'payload.id']
+- event_type: router.*
+ traits:
+ <<: *network_traits
+ resource_id:
+ fields: ['payload.router.id', 'payload.id']
+- event_type: floatingip.*
+ traits:
+ <<: *network_traits
+ resource_id:
+ fields: ['payload.floatingip.id', 'payload.id']
+- event_type: pool.*
+ traits:
+ <<: *network_traits
+ resource_id:
+ fields: ['payload.pool.id', 'payload.id']
+- event_type: vip.*
+ traits:
+ <<: *network_traits
+ resource_id:
+ fields: ['payload.vip.id', 'payload.id']
+- event_type: member.*
+ traits:
+ <<: *network_traits
+ resource_id:
+ fields: ['payload.member.id', 'payload.id']
+- event_type: health_monitor.*
+ traits:
+ <<: *network_traits
+ resource_id:
+ fields: ['payload.health_monitor.id', 'payload.id']
+- event_type: healthmonitor.*
+ traits:
+ <<: *network_traits
+ resource_id:
+ fields: ['payload.healthmonitor.id', 'payload.id']
+- event_type: listener.*
+ traits:
+ <<: *network_traits
+ resource_id:
+ fields: ['payload.listener.id', 'payload.id']
+- event_type: loadbalancer.*
+ traits:
+ <<: *network_traits
+ resource_id:
+ fields: ['payload.loadbalancer.id', 'payload.id']
+- event_type: firewall.*
+ traits:
+ <<: *network_traits
+ resource_id:
+ fields: ['payload.firewall.id', 'payload.id']
+- event_type: firewall_policy.*
+ traits:
+ <<: *network_traits
+ resource_id:
+ fields: ['payload.firewall_policy.id', 'payload.id']
+- event_type: firewall_rule.*
+ traits:
+ <<: *network_traits
+ resource_id:
+ fields: ['payload.firewall_rule.id', 'payload.id']
+- event_type: vpnservice.*
+ traits:
+ <<: *network_traits
+ resource_id:
+ fields: ['payload.vpnservice.id', 'payload.id']
+- event_type: ipsecpolicy.*
+ traits:
+ <<: *network_traits
+ resource_id:
+ fields: ['payload.ipsecpolicy.id', 'payload.id']
+- event_type: ikepolicy.*
+ traits:
+ <<: *network_traits
+ resource_id:
+ fields: ['payload.ikepolicy.id', 'payload.id']
+- event_type: ipsec_site_connection.*
+ traits:
+ <<: *network_traits
+ resource_id:
+ fields: ['payload.ipsec_site_connection.id', 'payload.id']
+- event_type: '*http.*'
+ traits: &http_audit
+ project_id:
+ fields: payload.initiator.project_id
+ user_id:
+ fields: payload.initiator.id
+ typeURI:
+ fields: payload.typeURI
+ eventType:
+ fields: payload.eventType
+ action:
+ fields: payload.action
+ outcome:
+ fields: payload.outcome
+ id:
+ fields: payload.id
+ eventTime:
+ fields: payload.eventTime
+ requestPath:
+ fields: payload.requestPath
+ observer_id:
+ fields: payload.observer.id
+ target_id:
+ fields: payload.target.id
+ target_typeURI:
+ fields: payload.target.typeURI
+ target_name:
+ fields: payload.target.name
+ initiator_typeURI:
+ fields: payload.initiator.typeURI
+ initiator_id:
+ fields: payload.initiator.id
+ initiator_name:
+ fields: payload.initiator.name
+ initiator_host_address:
+ fields: payload.initiator.host.address
+- event_type: '*http.response'
+ traits:
+ <<: *http_audit
+ reason_code:
+ fields: payload.reason.reasonCode
+- event_type: ['dns.domain.create', 'dns.domain.update', 'dns.domain.delete']
+ traits: &dns_domain_traits
+ status:
+ fields: payload.status
+ retry:
+ fields: payload.retry
+ description:
+ fields: payload.description
+ expire:
+ fields: payload.expire
+ email:
+ fields: payload.email
+ ttl:
+ fields: payload.ttl
+ action:
+ fields: payload.action
+ name:
+ fields: payload.name
+ resource_id:
+ fields: payload.id
+ created_at:
+ fields: payload.created_at
+ updated_at:
+ fields: payload.updated_at
+ version:
+ fields: payload.version
+ parent_domain_id:
+ fields: parent_domain_id
+ serial:
+ fields: payload.serial
+- event_type: dns.domain.exists
+ traits:
+ <<: *dns_domain_traits
+ audit_period_beginning:
+ type: datetime
+ fields: payload.audit_period_beginning
+ audit_period_ending:
+ type: datetime
+ fields: payload.audit_period_ending
+- event_type: trove.*
+ traits: &trove_base_traits
+ state:
+ fields: payload.state_description
+ instance_type:
+ fields: payload.instance_type
+ user_id:
+ fields: payload.user_id
+ resource_id:
+ fields: payload.instance_id
+ instance_type_id:
+ fields: payload.instance_type_id
+ launched_at:
+ type: datetime
+ fields: payload.launched_at
+ instance_name:
+ fields: payload.instance_name
+ state:
+ fields: payload.state
+ nova_instance_id:
+ fields: payload.nova_instance_id
+ service_id:
+ fields: payload.service_id
+ created_at:
+ type: datetime
+ fields: payload.created_at
+ region:
+ fields: payload.region
+- event_type: ['trove.instance.create', 'trove.instance.modify_volume', 'trove.instance.modify_flavor', 'trove.instance.delete']
+ traits: &trove_common_traits
+ name:
+ fields: payload.name
+ availability_zone:
+ fields: payload.availability_zone
+ instance_size:
+ type: int
+ fields: payload.instance_size
+ volume_size:
+ type: int
+ fields: payload.volume_size
+ nova_volume_id:
+ fields: payload.nova_volume_id
+- event_type: trove.instance.create
+ traits:
+ <<: [*trove_base_traits, *trove_common_traits]
+- event_type: trove.instance.modify_volume
+ traits:
+ <<: [*trove_base_traits, *trove_common_traits]
+ old_volume_size:
+ type: int
+ fields: payload.old_volume_size
+ modify_at:
+ type: datetime
+ fields: payload.modify_at
+- event_type: trove.instance.modify_flavor
+ traits:
+ <<: [*trove_base_traits, *trove_common_traits]
+ old_instance_size:
+ type: int
+ fields: payload.old_instance_size
+ modify_at:
+ type: datetime
+ fields: payload.modify_at
+- event_type: trove.instance.delete
+ traits:
+ <<: [*trove_base_traits, *trove_common_traits]
+ deleted_at:
+ type: datetime
+ fields: payload.deleted_at
+- event_type: trove.instance.exists
+ traits:
+ <<: *trove_base_traits
+ display_name:
+ fields: payload.display_name
+ audit_period_beginning:
+ type: datetime
+ fields: payload.audit_period_beginning
+ audit_period_ending:
+ type: datetime
+ fields: payload.audit_period_ending
+- event_type: profiler.*
+ traits:
+ project:
+ fields: payload.project
+ service:
+ fields: payload.service
+ name:
+ fields: payload.name
+ base_id:
+ fields: payload.base_id
+ trace_id:
+ fields: payload.trace_id
+ parent_id:
+ fields: payload.parent_id
+ timestamp:
+ fields: payload.timestamp
+ host:
+ fields: payload.info.host
+ path:
+ fields: payload.info.request.path
+ query:
+ fields: payload.info.request.query
+ method:
+ fields: payload.info.request.method
+ scheme:
+ fields: payload.info.request.scheme
+ db.statement:
+ fields: payload.info.db.statement
+ db.params:
+ fields: payload.info.db.params
+- event_type: 'magnum.bay.*'
+ traits: &magnum_bay_crud
+ id:
+ fields: payload.id
+ typeURI:
+ fields: payload.typeURI
+ eventType:
+ fields: payload.eventType
+ eventTime:
+ fields: payload.eventTime
+ action:
+ fields: payload.action
+ outcome:
+ fields: payload.outcome
+ initiator_id:
+ fields: payload.initiator.id
+ initiator_typeURI:
+ fields: payload.initiator.typeURI
+ initiator_name:
+ fields: payload.initiator.name
+ initiator_host_agent:
+ fields: payload.initiator.host.agent
+ initiator_host_address:
+ fields: payload.initiator.host.address
+ target_id:
+ fields: payload.target.id
+ target_typeURI:
+ fields: payload.target.typeURI
+ observer_id:
+ fields: payload.observer.id
+ observer_typeURI:
+ fields: payload.observer.typeURI
diff --git a/ceilometer/files/pike/event_pipeline.yaml b/ceilometer/files/pike/event_pipeline.yaml
new file mode 100644
index 0000000..8f025fc
--- /dev/null
+++ b/ceilometer/files/pike/event_pipeline.yaml
@@ -0,0 +1,12 @@
+---
+sources:
+ - name: event_source
+ events:
+ - "*"
+ sinks:
+ - event_sink
+sinks:
+ - name: event_sink
+ transformers:
+ publishers:
+ - direct://
\ No newline at end of file
diff --git a/ceilometer/files/pike/gabbi_pipeline.yaml b/ceilometer/files/pike/gabbi_pipeline.yaml
new file mode 100644
index 0000000..e90516f
--- /dev/null
+++ b/ceilometer/files/pike/gabbi_pipeline.yaml
@@ -0,0 +1,19 @@
+# A limited pipeline for use with the Gabbi spike.
+# direct writes to the the metering database without using an
+# intermediary dispatcher.
+#
+# This is one of several things that will need some extensive
+# tidying to be more right.
+---
+sources:
+ - name: meter_source
+ interval: 1
+ meters:
+ - "*"
+ sinks:
+ - meter_sink
+sinks:
+ - name: meter_sink
+ transformers:
+ publishers:
+ - direct://
diff --git a/ceilometer/files/pike/pipeline.yaml b/ceilometer/files/pike/pipeline.yaml
new file mode 100644
index 0000000..4bf2f6c
--- /dev/null
+++ b/ceilometer/files/pike/pipeline.yaml
@@ -0,0 +1,27 @@
+{%- from "ceilometer/map.jinja" import server with context %}
+{%- from "ceilometer/map.jinja" import agent with context %}
+{%- if server.get('enabled', False) %}
+{%- set publisher = server.publisher %}
+{%- else %}
+{%- set publisher = agent.publisher %}
+{%- endif %}
+---
+sources:
+ - name: meter_source
+ interval: 60
+ meters:
+ - "*"
+ sinks:
+ - meter_sink
+sinks:
+ - name: meter_sink
+ transformers:
+ publishers:
+ {%- for publisher_name, publisher in publisher.items() %}
+ {%- if publisher_name == 'default' %}
+ - notifier://
+ {%- endif %}
+ {%- if publisher_name == 'graphite' %}
+ - graphite://{{ publisher.host }}:{{ publisher.port }}
+ {%- endif %}
+ {%- endfor %}
\ No newline at end of file