diff --git a/lib/cpp/README.md b/lib/cpp/README.md
old mode 100644
new mode 100755
index 576d017..e57fdd4
--- a/lib/cpp/README.md
+++ b/lib/cpp/README.md
@@ -1,7 +1,6 @@
 Thrift C++ Software Library
 
-License
-=======
+# License
 
 Licensed to the Apache Software Foundation (ASF) under one
 or more contributor license agreements. See the NOTICE file
@@ -20,31 +19,28 @@
 specific language governing permissions and limitations
 under the License.
 
-Using Thrift with C++
-=====================
+
+# Using Thrift with C++
 
 The Thrift C++ libraries are built using the GNU tools. Follow the instructions
-in the top-level README, or run bootstrap.sh in this folder to generate the
-Makefiles.
+in the top-level README.md
 
-In case you do not want to open another README file, do this:
-  ./bootstrap.sh
-  ./configure (--with-boost=/usr/local)
-  make
-  sudo make install
+In case you do not want to open another README.md file, do this thrift src:
+
+    ./bootstrap.sh
+    ./configure (--with-boost=/usr/local)
+    make
+    sudo make install
 
 Thrift is divided into two libraries.
 
-libthrift
-  The core Thrift library contains all the core Thrift code. It requires
+* libthrift - The core Thrift library contains all the core Thrift code. It requires
   boost shared pointers, pthreads, and librt.
 
-libthriftnb
-  This library contains the Thrift nonblocking server, which uses libevent.
+* libthriftnb - This library contains the Thrift nonblocking server, which uses libevent.
   To link this library you will also need to link libevent.
 
-Linking Against Thrift
-======================
+## Linking Against Thrift
 
 After you build and install Thrift the libraries are installed to
 /usr/local/lib by default. Make sure this is in your LDPATH.
@@ -57,11 +53,212 @@
 libraries when linking against thrift, such as librt and/or libpthread. If
 you are using libthriftnb you will also need libevent.
 
-Dependencies
-============
+## Dependencies
 
 boost shared pointers
 http://www.boost.org/libs/smart_ptr/smart_ptr.htm
 
 libevent (for libthriftnb only)
 http://monkey.org/~provos/libevent/
+
+# Using Thrift with C++ on Windows
+
+You need to define an enviroment variable called THIRD_PARTY. The project
+assumes that you have extracted the dependancies into their default structure
+into the path defined by THIRD_PARTY.
+
+e.g. $(THIRD_PARTY)/boost/boost_1_47_0/
+
+Thrift is divided into two libraries.
+
+* libthrift - The core Thrift library contains all the core Thrift code. It requires
+  boost shared pointers, pthreads, and librt.
+
+* libthriftnb - This library contains the Thrift nonblocking server, which uses libevent.
+  To link this library you will also need to link libevent.
+
+## Linking Against Thrift
+
+You need to link your project that uses thrift against all the thrift
+dependancies; in the case of libthrift, boost and for
+libthriftnb, libevent.
+
+In the project properties you must also set HAVE_CONFIG_H as force include
+the config header: "windows/confg.h"
+
+## Dependencies
+
+boost shared pointers
+http://www.boost.org/libs/smart_ptr/smart_ptr.htm
+
+boost thread
+http://www.boost.org/doc/libs/release/doc/html/thread.html
+
+libevent (for libthriftnb only)
+http://monkey.org/~provos/libevent/
+
+## Notes on boost thread (static vs shared):
+
+By default lib/cpp/windows/force_inc.h defines:
+
+    #define BOOST_ALL_NO_LIB 1
+    #define BOOST_THREAD_NO_LIB 1
+
+This has for effect to have the host application linking against Thrift
+to have to link with boost thread as a static library.
+
+If you wanted instead to link with boost thread as a shared library,
+you'll need to uncomment those two lines, and recompile.
+
+## Windows version compatibility
+
+The Thrift library targets Windows XP for broadest compatbility. A notable
+difference is in the Windows-specific implementation of the socket poll
+function. To target Vista, Win7 or other versions, comment out the line
+
+    #define TARGET_WIN_XP.
+
+## Named Pipes
+
+Named Pipe transport has been added in the TPipe and TPipeServer classes. This
+is currently Windows-only. Named pipe transport for *NIX has not been
+implemented. Domain sockets are a better choice for local IPC under non-Windows
+OS's. *NIX named pipes only support 1:1 client-server connection.
+
+# Thrift/SSL
+
+1. Scope
+
+   This SSL only supports blocking mode socket I/O. It can only be used with
+   TSimpleServer, TThreadedServer, and TThreadPoolServer.
+
+2. Implementation
+
+   There're two main classes TSSLSocketFactory and TSSLSocket. Instances of
+   TSSLSocket are always created from TSSLSocketFactory.
+
+   PosixSSLThreadFactory creates PosixSSLThread. The only difference from the
+   PthreadThread type is that it cleanups OpenSSL error queue upon exiting
+   the thread. Ideally, OpenSSL APIs should only be called from PosixSSLThread.
+
+3. How to use SSL APIs
+
+        // This is for demo. In real code, typically only one TSSLSocketFactory
+        // instance is needed.
+        shared_ptr<TSSLSocketFactory> getSSLSocketFactory() {
+          shared_ptr<TSSLSocketFactory> factory(new TSSLSocketFactory());
+          // client: load trusted certificates
+          factory->loadTrustedCertificates("my-trusted-ca-certificates.pem");
+          // client: optionally set your own access manager, otherwise,
+          //         the default client access manager will be loaded.
+
+          factory->loadCertificate("my-certificate-signed-by-ca.pem");
+          factory->loadPrivateKey("my-private-key.pem");
+          // server: optionally setup access manager
+          // shared_ptr<AccessManager> accessManager(new MyAccessManager);
+          // factory->access(accessManager);
+          ...
+        }
+
+
+        // client code sample
+        shared_ptr<TSSLSocketFactory> factory = getSSLSocketFactory();
+        shared_ptr<TSocket> socket = factory.createSocket(host, port);
+        shared_ptr<TBufferedTransport> transport(new TBufferedTransport(socket));
+        ...
+
+
+        // server code sample
+        shared_ptr<TSSLSocketFactory> factory = getSSLSocketFactory();
+        shared_ptr<TSSLServerSocket> socket(new TSSLServerSocket(port, factory));
+        shared_ptr<TTransportFactory> transportFactory(new TBufferedTransportFactory));
+        ...
+
+4. AccessManager
+
+   AccessManager defines a callback interface. It has three callback methods:
+
+   (a) Decision verify(const sockaddr_storage& sa);
+   (b) Decision verify(const string& host, const char* name, int size);
+   (c) Decision verify(const sockaddr_storage& sa, const char* data, int size);
+
+   After SSL handshake completes, additional checks are conducted. Application
+   is given the chance to decide whether or not to continue the conversation
+   with the remote. Application is queried through the above three "verify"
+   method. They are called at different points of the verification process.
+
+   Decisions can be one of ALLOW, DENY, and SKIP. ALLOW and DENY means the
+   conversation should be continued or disconnected, respectively. ALLOW and
+   DENY decision stops the verification process. SKIP means there's no decision
+   based on the given input, continue the verification process.
+
+   First, (a) is called with the remote IP. It is called once at the beginning.
+   "sa" is the IP address of the remote peer.
+
+   Then, the certificate of remote peer is loaded. SubjectAltName extensions
+   are extracted and sent to application for verification. When a DNS
+   subjectAltName field is extracted, (b) is called. When an IP subjectAltName
+   field is extracted, (c) is called.
+
+   The "host" in (b) is the value from TSocket::getHost() if this is a client
+   side socket, or TSocket::getPeerHost() if this is a server side socket. The
+   reason is client side socket initiates the connection. TSocket::getHost()
+   is the remote host name. On server side, the remote host name is unknown
+   unless it's retrieved through TSocket::getPeerHost(). Either way, "host"
+   should be the remote host name. Keep in mind, if TSocket::getPeerHost()
+   failed, it would return the remote host name in numeric format.
+
+   If all subjectAltName extensions were "skipped", the common name field would
+   be checked. It is sent to application through (c), where "sa" is the remote
+   IP address. "data" is the IP address extracted from subjectAltName IP
+   extension, and "size" is the length of the extension data.
+
+   If any of the above "verify" methods returned a decision ALLOW or DENY, the
+   verification process would be stopped.
+
+   If any of the above "verify" methods returned SKIP, that decision would be
+   ignored and the verification process would move on till the last item is
+   examined. At that point, if there's still no decision, the connection is
+   terminated.
+
+   Thread safety, an access manager should not store state information if it's
+   to be used by many SSL sockets.
+
+5. SIGPIPE signal
+
+   Applications running OpenSSL over network connections may crash if SIGPIPE
+   is not ignored. This happens when they receive a connection reset by remote
+   peer exception, which somehow triggers a SIGPIPE signal. If not handled,
+   this signal would kill the application.
+
+6. How to run test client/server in SSL mode
+
+   The server and client expects the followings from the directory /test/
+
+   - keys/server.crt
+   - keys/server.key
+   - keys/CA.pem
+
+   The file names are hard coded in the source code. You need to create these
+   certificates before you can run the test code in SSL mode. Make sure at least
+   one of the followings is included in "keys/server.crt",
+
+   - subjectAltName, DNS localhost
+   - subjectAltName, IP  127.0.0.1
+   - common name,    localhost
+
+   Run within /test/ folder,
+
+            ./cpp/TestServer --ssl &
+            ./cpp/TestClient --ssl
+
+   If "-h <host>" is used to run client, the above "localhost" in the above
+   server-certificate.pem has to be replaced with that host name.
+
+7. TSSLSocketFactory::randomize()
+
+   The default implementation of OpenSSLSocketFactory::randomize() simply calls
+   OpenSSL's RAND_poll() when OpenSSL library is first initialized.
+
+   The PRNG seed is key to the application security. This method should be
+   overridden if it's not strong enough for you.