diff --git a/doc/thrift.tex b/doc/thrift.tex
new file mode 100644
index 0000000..d20b737
--- /dev/null
+++ b/doc/thrift.tex
@@ -0,0 +1,1057 @@
+%-----------------------------------------------------------------------------
+%
+%               Thrift whitepaper
+%
+% Name:         thrift.tex
+%
+% Authors:      Mark Slee (mcslee@facebook.com)
+%
+% Created:      05 March 2007
+%
+% You will need a copy of sigplanconf.cls to format this document.
+% It is available at <http://www.sigplan.org/authorInformation.htm>.
+%
+%-----------------------------------------------------------------------------
+
+
+\documentclass[nocopyrightspace,blockstyle]{sigplanconf}
+
+\usepackage{amssymb}
+\usepackage{amsfonts}
+\usepackage{amsmath}
+\usepackage{url}
+
+\begin{document}
+
+% \conferenceinfo{WXYZ '05}{date, City.}
+% \copyrightyear{2007}
+% \copyrightdata{[to be supplied]}
+
+% \titlebanner{banner above paper title}        % These are ignored unless
+% \preprintfooter{short description of paper}   % 'preprint' option specified.
+
+\title{Thrift: Scalable Cross-Language Services Implementation}
+\subtitle{}
+
+\authorinfo{Mark Slee, Aditya Agarwal and Marc Kwiatkowski}
+           {Facebook, 156 University Ave, Palo Alto, CA}
+           {\{mcslee,aditya,marc\}@facebook.com}
+
+\maketitle
+
+\begin{abstract}
+Thrift is a software library and set of code-generation tools developed at
+Facebook to expedite development and implementation of efficient and scalable
+backend services. Its primary goal is to enable efficient and reliable
+communication across programming languages by abstracting the portions of each
+language that tend to require the most customization into a common library
+that is implemented in each language. Specifically, Thrift allows developers to
+define datatypes and service interfaces in a single language-neutral file
+and generate all the necessary code to build RPC clients and servers.
+
+This paper details the motivations and design choices we made in Thrift, as
+well as some of the more interesting implementation details. It is not
+intended to be taken as research, but rather it is an exposition on what we did
+and why.
+\end{abstract}
+
+% \category{D.3.3}{Programming Languages}{Language constructs and features}
+
+%\terms
+%Languages, serialization, remote procedure call
+
+%\keywords
+%Data description language, interface definition language, remote procedure call
+
+\section{Introduction}
+As Facebook's traffic and network structure have scaled, the resource
+demands of many operations on the site (i.e. search,
+ad selection and delivery, event logging) have presented technical requirements
+drastically outside the scope of the LAMP framework. In our implementation of
+these services, various programming languages have been selected to
+optimize for the right combination of performance, ease and speed of
+development, availability of existing libraries, etc. By and large,
+Facebook's engineering culture has tended towards choosing the best
+tools and implementations available over standardizing on any one
+programming language and begrudgingly accepting its inherent limitations.
+
+Given this design choice, we were presented with the challenge of building
+a transparent, high-performance bridge across many programming languages.
+We found that most available solutions were either too limited, did not offer
+sufficient datatype freedom, or suffered from subpar performance.
+\footnote{See Appendix A for a discussion of alternative systems.}
+
+The solution that we have implemented combines a language-neutral software
+stack implemented across numerous programming languages and an associated code
+generation engine that transforms a simple interface and data definition
+language into client and server remote procedure call libraries.
+Choosing static code generation over a dynamic system allows us to create
+validated code that can be run without the need for
+any advanced introspective run-time type checking. It is also designed to
+be as simple as possible for the developer, who can typically define all
+the necessary data structures and interfaces for a complex service in a single
+short file.
+
+Surprised that a robust open solution to these relatively common problems
+did not yet exist, we committed early on to making the Thrift implementation
+open source.
+
+In evaluating the challenges of cross-language interaction in a networked
+environment, some key components were identified:
+
+\textit{Types.} A common type system must exist across programming languages
+without requiring that the application developer use custom Thrift datatypes
+or write their own serialization code. That is,
+a C++ programmer should be able to transparently exchange a strongly typed
+STL map for a dynamic Python dictionary. Neither
+programmer should be forced to write any code below the application layer
+to achieve this. Section 2 details the Thrift type system.
+
+\textit{Transport.} Each language must have a common interface to
+bidirectional raw data transport. The specifics of how a given
+transport is implemented should not matter to the service developer.
+The same application code should be able to run against TCP stream sockets,
+raw data in memory, or files on disk. Section 3 details the Thrift Transport
+layer.
+
+\textit{Protocol.} Datatypes must have some way of using the Transport
+layer to encode and decode themselves. Again, the application
+developer need not be concerned by this layer. Whether the service uses
+an XML or binary protocol is immaterial to the application code.
+All that matters is that the data can be read and written in a consistent,
+deterministic matter. Section 4 details the Thrift Protocol layer.
+
+\textit{Versioning.} For robust services, the involved datatypes must
+provide a mechanism for versioning themselves. Specifically,
+it should be possible to add or remove fields in an object or alter the
+argument list of a function without any interruption in service (or,
+worse yet, nasty segmentation faults). Section 5 details Thrift's versioning
+system.
+
+\textit{Processors.} Finally, we generate code capable of processing data
+streams to accomplish remote procedure calls. Section 6 details the generated
+code and TProcessor paradigm.
+
+Section 7 discusses implementation details, and Section 8 describes
+our conclusions.
+
+\section{Types}
+
+The goal of the Thrift type system is to enable programmers to develop using
+completely natively defined types, no matter what programming language they
+use. By design, the Thrift type system does not introduce any special dynamic
+types or wrapper objects. It also does not require that the developer write
+any code for object serialization or transport. The Thrift IDL (Interface
+Definition Language) file is
+logically a way for developers to annotate their data structures with the
+minimal amount of extra information necessary to tell a code generator
+how to safely transport the objects across languages.
+
+\subsection{Base Types}
+
+The type system rests upon a few base types. In considering which types to
+support, we aimed for clarity and simplicity over abundance, focusing
+on the key types available in all programming languages, ommitting any
+niche types available only in specific languages.
+
+The base types supported by Thrift are:
+\begin{itemize}
+\item \texttt{bool} A boolean value, true or false
+\item \texttt{byte} A signed byte
+\item \texttt{i16} A 16-bit signed integer
+\item \texttt{i32} A 32-bit signed integer
+\item \texttt{i64} A 64-bit signed integer
+\item \texttt{double} A 64-bit floating point number
+\item \texttt{string} An encoding-agnostic text or binary string
+\item \texttt{binary} A byte array representation for blobs
+\end{itemize}
+
+Of particular note is the absence of unsigned integer types. Because these
+types have no direct translation to native primitive types in many languages,
+the advantages they afford are lost. Further, there is no way to prevent the
+application developer in a language like Python from assigning a negative value
+to an integer variable, leading to unpredictable behavior. From a design
+standpoint, we observed that unsigned integers were very rarely, if ever, used
+for arithmetic purposes, but in practice were much more often used as keys or
+identifiers. In this case, the sign is irrelevant. Signed integers serve this
+same purpose and can be safely cast to their unsigned counterparts (most
+commonly in C++) when absolutely necessary.
+
+\subsection{Structs}
+
+A Thrift struct defines a common object to be used across languages. A struct
+is essentially equivalent to a class in object oriented programming
+languages. A struct has a set of strongly typed fields, each with a unique
+name identifier. The basic syntax for defining a Thrift struct looks very
+similar to a C struct definition. Fields may be annotated with an integer field
+identifier (unique to the scope of that struct) and optional default values.
+Field identifiers will be automatically assigned if omitted, though they are
+strongly encouraged for versioning reasons discussed later.
+
+\subsection{Containers}
+
+Thrift containers are strongly typed containers that map to the most commonly
+used containers in common programming languages. They are annotated using
+the C++ template (or Java Generics) style. There are three types available:
+\begin{itemize}
+\item \texttt{list<type>} An ordered list of elements. Translates directly into
+an STL \texttt{vector}, Java \texttt{ArrayList}, or native array in scripting languages. May
+contain duplicates.
+\item \texttt{set<type>} An unordered set of unique elements. Translates into
+an STL \texttt{set}, Java \texttt{HashSet}, \texttt{set} in Python, or native
+dictionary in PHP/Ruby.
+\item \texttt{map<type1,type2>} A map of strictly unique keys to values
+Translates into an STL \texttt{map}, Java \texttt{HashMap}, PHP associative
+array, or Python/Ruby dictionary.
+\end{itemize}
+
+While defaults are provided, the type mappings are not explicitly fixed. Custom
+code generator directives have been added to substitute custom types in
+destination languages (i.e.
+\texttt{hash\_map} or Google's sparse hash map can be used in C++). The
+only requirement is that the custom types support all the necessary iteration
+primitives. Container elements may be of any valid Thrift type, including other
+containers or structs.
+
+\begin{verbatim}
+struct Example {
+  1:i32 number=10,
+  2:i64 bigNumber,
+  3:double decimals,
+  4:string name="thrifty"
+}\end{verbatim}
+
+In the target language, each definition generates a type with two methods,
+\texttt{read} and \texttt{write}, which perform serialization and transport
+of the objects using a Thrift TProtocol object.
+
+\subsection{Exceptions}
+
+Exceptions are syntactically and functionally equivalent to structs except
+that they are declared using the \texttt{exception} keyword instead of the
+\texttt{struct} keyword.
+
+The generated objects inherit from an exception base class as appropriate
+in each target programming language, in order to seamlessly
+integrate with native exception handling in any given
+language. Again, the design emphasis is on making the code familiar to the
+application developer.
+
+\subsection{Services}
+
+Services are defined using Thrift types. Definition of a service is
+semantically equivalent to defining an interface (or a pure virtual abstract
+class) in object oriented
+programming. The Thrift compiler generates fully functional client and
+server stubs that implement the interface. Services are defined as follows:
+
+\begin{verbatim}
+service <name> {
+  <returntype> <name>(<arguments>)
+    [throws (<exceptions>)]
+  ...
+}\end{verbatim}
+
+An example:
+
+\begin{verbatim}
+service StringCache {
+  void set(1:i32 key, 2:string value),
+  string get(1:i32 key) throws (1:KeyNotFound knf),
+  void delete(1:i32 key)
+}
+\end{verbatim}
+
+Note that \texttt{void} is a valid type for a function return, in addition to
+all other defined Thrift types. Additionally, an \texttt{async} modifier
+keyword may be added to a \texttt{void} function, which will generate code that does
+not wait for a response from the server. Note that a pure \texttt{void}
+function will return a response to the client which guarantees that the
+operation has completed on the server side. With \texttt{async} method calls
+the client will only be guaranteed that the request succeeded at the
+transport layer. (In many transport scenarios this is inherently unreliable
+due to the Byzantine Generals' Problem. Therefore, application developers
+should take care only to use the async optimization in cases where dropped
+method calls are acceptable or the transport is known to be reliable.)
+
+Also of note is the fact that argument lists and exception lists for functions
+are implemented as Thrift structs. All three constructs are identical in both
+notation and behavior.
+
+\section{Transport}
+
+The transport layer is used by the generated code to facilitate data transfer.
+
+\subsection{Interface}
+
+A key design choice in the implementation of Thrift was to decouple the
+transport layer from the code generation layer. Though Thrift is typically
+used on top of the TCP/IP stack with streaming sockets as the base layer of
+communication, there was no compelling reason to build that constraint into
+the system. The performance tradeoff incurred by an abstracted I/O layer
+(roughly one virtual method lookup / function call per operation) was
+immaterial compared to the cost of actual I/O operations (typically invoking
+system calls).
+
+Fundamentally, generated Thrift code only needs to know how to read and
+write data. The origin and destination of the data are irrelevant; it may be a
+socket, a segment of shared memory, or a file on the local disk. The Thrift
+transport interface supports the following methods:
+
+\begin{itemize}
+\item \texttt{open} Opens the tranpsort
+\item \texttt{close} Closes the tranport
+\item \texttt{isOpen} Indicates whether the transport is open
+\item \texttt{read} Reads from the transport
+\item \texttt{write} Writes to the transport
+\item \texttt{flush} Forces any pending writes
+\end{itemize}
+
+There are a few additional methods not documented here which are used to aid
+in batching reads and optionally signaling the completion of a read or
+write operation from the generated code.
+
+In addition to the above
+\texttt{TTransport} interface, there is a\\
+\texttt{TServerTransport} interface
+used to accept or create primitive transport objects. Its interface is as
+follows:
+
+\begin{itemize}
+\item \texttt{open} Opens the transport
+\item \texttt{listen} Begins listening for connections
+\item \texttt{accept} Returns a new client transport
+\item \texttt{close} Closes the transport
+\end{itemize}
+
+\subsection{Implementation}
+
+The transport interface is designed for simple implementation in any
+programming language. New transport mechanisms can be easily defined as needed
+by application developers.
+
+\subsubsection{TSocket}
+
+The \texttt{TSocket} class is implemented across all target languages. It
+provides a common, simple interface to a TCP/IP stream socket.
+
+\subsubsection{TFileTransport}
+
+The \texttt{TFileTransport} is an abstraction of an on-disk file to a data
+stream. It can be used to write out a set of incoming Thrift requests to a file
+on disk. The on-disk data can then be replayed from the log, either for
+post-processing or for reproduction and/or simulation of past events.
+
+\subsubsection{Utilities}
+
+The Transport interface is designed to support easy extension using common
+OOP techniques, such as composition. Some simple utilites include the
+\texttt{TBufferedTransport}, which buffers the writes and reads on an
+underlying transport, the \texttt{TFramedTransport}, which transmits data with frame
+size headers for chunking optimization or nonblocking operation, and the
+\texttt{TMemoryBuffer}, which allows reading and writing directly from the heap
+or stack memory owned by the process.
+
+\section{Protocol}
+
+A second major abstraction in Thrift is the separation of data structure from
+transport representation. Thrift enforces a certain messaging structure when
+transporting data, but it is agnostic to the protocol encoding in use. That is,
+it does not matter whether data is encoded as XML, human-readable ASCII, or a
+dense binary format as long as the data supports a fixed set of operations
+that allow it to be deterministically read and written by generated code.
+
+\subsection{Interface}
+
+The Thrift Protocol interface is very straightforward. It fundamentally
+supports two things: 1) bidirectional sequenced messaging, and
+2) encoding of base types, containers, and structs.
+
+\begin{verbatim}
+writeMessageBegin(name, type, seq)
+writeMessageEnd()
+writeStructBegin(name)
+writeStructEnd()
+writeFieldBegin(name, type, id)
+writeFieldEnd()
+writeFieldStop()
+writeMapBegin(ktype, vtype, size)
+writeMapEnd()
+writeListBegin(etype, size)
+writeListEnd()
+writeSetBegin(etype, size)
+writeSetEnd()
+writeBool(bool)
+writeByte(byte)
+writeI16(i16)
+writeI32(i32)
+writeI64(i64)
+writeDouble(double)
+writeString(string)
+
+name, type, seq = readMessageBegin()
+                  readMessageEnd()
+name =            readStructBegin()
+                  readStructEnd()
+name, type, id =  readFieldBegin()
+                  readFieldEnd()
+k, v, size =      readMapBegin()
+                  readMapEnd()
+etype, size =     readListBegin()
+                  readListEnd()
+etype, size =     readSetBegin()
+                  readSetEnd()
+bool =            readBool()
+byte =            readByte()
+i16 =             readI16()
+i32 =             readI32()
+i64 =             readI64()
+double =          readDouble()
+string =          readString()
+\end{verbatim}
+
+Note that every \texttt{write} function has exactly one \texttt{read} counterpart, with
+the exception of \texttt{writeFieldStop()}. This is a special method
+that signals the end of a struct. The procedure for reading a struct is to
+\texttt{readFieldBegin()} until the stop field is encountered, and then to
+\texttt{readStructEnd()}.  The
+generated code relies upon this call sequence to ensure that everything written by
+a protocol encoder can be read by a matching protocol decoder. Further note
+that this set of functions is by design more robust than necessary.
+For example, \texttt{writeStructEnd()} is not strictly necessary, as the end of
+a struct may be implied by the stop field. This method is a convenience for
+verbose protocols in which it is cleaner to separate these calls (e.g. a closing
+\texttt{</struct>} tag in XML).
+
+\subsection{Structure}
+
+Thrift structures are designed to support encoding into a streaming
+protocol. The implementation should never need to frame or compute the
+entire data length of a structure prior to encoding it. This is critical to
+performance in many scenarios. Consider a long list of relatively large
+strings. If the protocol interface required reading or writing a list to be an
+atomic operation, then the implementation would need to perform a linear pass over the
+entire list before encoding any data. However, if the list can be written
+as iteration is performed, the corresponding read may begin in parallel,
+theoretically offering an end-to-end speedup of $(kN - C)$, where $N$ is the size
+of the list, $k$ the cost factor associated with serializing a single
+element, and $C$ is fixed offset for the delay between data being written
+and becoming available to read.
+
+Similarly, structs do not encode their data lengths a priori. Instead, they are
+encoded as a sequence of fields, with each field having a type specifier and a
+unique field identifier. Note that the inclusion of type specifiers allows
+the protocol to be safely parsed and decoded without any generated code
+or access to the original IDL file. Structs are terminated by a field header
+with a special \texttt{STOP} type. Because all the basic types can be read
+deterministically, all structs (even those containing other structs) can be
+read deterministically. The Thrift protocol is self-delimiting without any
+framing and regardless of the encoding format.
+
+In situations where streaming is unnecessary or framing is advantageous, it
+can be very simply added into the transport layer, using the
+\texttt{TFramedTransport} abstraction.
+
+\subsection{Implementation}
+
+Facebook has implemented and deployed a space-efficient binary protocol which
+is used by most backend services. Essentially, it writes all data
+in a flat binary format. Integer types are converted to network byte order,
+strings are prepended with their byte length, and all message and field headers
+are written using the primitive integer serialization constructs. String names
+for fields are omitted - when using generated code, field identifiers are
+sufficient.
+
+We decided against some extreme storage optimizations (i.e. packing
+small integers into ASCII or using a 7-bit continuation format) for the sake
+of simplicity and clarity in the code. These alterations can easily be made
+if and when we encounter a performance-critical use case that demands them.
+
+\section{Versioning}
+
+Thrift is robust in the face of versioning and data definition changes. This
+is critical to enable staged rollouts of changes to deployed services. The
+system must be able to support reading of old data from log files, as well as
+requests from out-of-date clients to new servers, and vice versa.
+
+\subsection{Field Identifiers}
+
+Versioning in Thrift is implemented via field identifiers. The field header
+for every member of a struct in Thrift is encoded with a unique field
+identifier. The combination of this field identifier and its type specifier
+is used to uniquely identify the field. The Thrift definition language
+supports automatic assignment of field identifiers, but it is good
+programming practice to always explicitly specify field identifiers.
+Identifiers are specified as follows:
+
+\begin{verbatim}
+struct Example {
+  1:i32 number=10,
+  2:i64 bigNumber,
+  3:double decimals,
+  4:string name="thrifty"
+}\end{verbatim}
+
+To avoid conflicts between manually and automatically assigned identifiers,
+fields with identifiers omitted are assigned identifiers
+decrementing from -1, and the language only supports the manual assignment of
+positive identifiers.
+
+When data is being deserialized, the generated code can use these identifiers
+to properly identify the field and determine whether it aligns with a field in
+its definition file. If a field identifier is not recognized, the generated
+code can use the type specifier to skip the unknown field without any error.
+Again, this is possible due to the fact that all datatypes are self
+delimiting.
+
+Field identifiers can (and should) also be specified in function argument
+lists. In fact, argument lists are not only represented as structs on the
+backend, but actually share the same code in the compiler frontend. This
+allows for version-safe modification of method parameters
+
+\begin{verbatim}
+service StringCache {
+  void set(1:i32 key, 2:string value),
+  string get(1:i32 key) throws (1:KeyNotFound knf),
+  void delete(1:i32 key)
+}
+\end{verbatim}
+
+The syntax for specifying field identifiers was chosen to echo their structure.
+Structs can be thought of as a dictionary where the identifiers are keys, and
+the values are strongly-typed named fields.
+
+Field identifiers internally use the \texttt{i16} Thrift type. Note, however,
+that the \texttt{TProtocol} abstraction may encode identifiers in any format.
+
+\subsection{Isset}
+
+When an unexpected field is encountered, it can be safely ignored and
+discarded. When an expected field is not found, there must be some way to
+signal to the developer that it was not present. This is implemented via an
+inner \texttt{isset} structure inside the defined objects. (Isset functionality
+is implicit with a \texttt{null} value in PHP, \texttt{None} in Python
+and \texttt{nil} in Ruby.) Essentially,
+the inner \texttt{isset} object of each Thrift struct contains a boolean value
+for each field which denotes whether or not that field is present in the
+struct. When a reader receives a struct, it should check for a field being set
+before operating directly on it.
+
+\begin{verbatim}
+class Example {
+ public:
+  Example() :
+    number(10),
+    bigNumber(0),
+    decimals(0),
+    name("thrifty") {}
+
+  int32_t number;
+  int64_t bigNumber;
+  double decimals;
+  std::string name;
+
+  struct __isset {
+    __isset() :
+      number(false),
+      bigNumber(false),
+      decimals(false),
+      name(false) {}
+    bool number;
+    bool bigNumber;
+    bool decimals;
+    bool name;
+  } __isset;
+...
+}
+\end{verbatim}
+
+\subsection{Case Analysis}
+
+There are four cases in which version mismatches may occur.
+
+\begin{enumerate}
+\item \textit{Added field, old client, new server.} In this case, the old
+client does not send the new field. The new server recognizes that the field
+is not set, and implements default behavior for out-of-date requests.
+\item \textit{Removed field, old client, new server.} In this case, the old
+client sends the removed field. The new server simply ignores it.
+\item \textit{Added field, new client, old server.} The new client sends a
+field that the old server does not recognize. The old server simply ignores
+it and processes as normal.
+\item \textit{Removed field, new client, old server.} This is the most
+dangerous case, as the old server is unlikely to have suitable default
+behavior implemented for the missing field. It is recommended that in this
+situation the new server be rolled out prior to the new clients.
+\end{enumerate}
+
+\subsection{Protocol/Transport Versioning}
+The \texttt{TProtocol} abstractions are also designed to give protocol
+implementations the freedom to version themselves in whatever manner they
+see fit. Specifically, any protocol implementation is free to send whatever
+it likes in the \texttt{writeMessageBegin()} call. It is entirely up to the
+implementor how to handle versioning at the protocol level. The key point is
+that protocol encoding changes are safely isolated from interface definition
+version changes.
+
+Note that the exact same is true of the \texttt{TTransport} interface. For
+example, if we wished to add some new checksumming or error detection to the
+\texttt{TFileTransport}, we could simply add a version header into the
+data it writes to the file in such a way that it would still accept old
+log files without the given header.
+
+\section{RPC Implementation}
+
+\subsection{TProcessor}
+
+The last core interface in the Thrift design is the \texttt{TProcessor},
+perhaps the most simple of the constructs. The interface is as follows:
+
+\begin{verbatim}
+interface TProcessor {
+  bool process(TProtocol in, TProtocol out)
+    throws TException
+}
+\end{verbatim}
+
+The key design idea here is that the complex systems we build can fundamentally
+be broken down into agents or services that operate on inputs and outputs. In
+most cases, there is actually just one input and output (an RPC client) that
+needs handling.
+
+\subsection{Generated Code}
+
+When a service is defined, we generate a
+\texttt{TProcessor} instance capable of handling RPC requests to that service,
+using a few helpers. The fundamental structure (illustrated in pseudo-C++) is
+as follows:
+
+\begin{verbatim}
+Service.thrift
+ => Service.cpp
+     interface ServiceIf
+     class ServiceClient : virtual ServiceIf
+       TProtocol in
+       TProtocol out
+     class ServiceProcessor : TProcessor
+       ServiceIf handler
+
+ServiceHandler.cpp
+ class ServiceHandler : virtual ServiceIf
+
+TServer.cpp
+ TServer(TProcessor processor,
+         TServerTransport transport,
+         TTransportFactory tfactory,
+         TProtocolFactory pfactory)
+ serve()
+\end{verbatim}
+
+From the Thrift definition file, we generate the virtual service interface.
+A client class is generated, which implements the interface and
+uses two \texttt{TProtocol} instances to perform the I/O operations. The
+generated processor implements the \texttt{TProcessor} interface. The generated
+code has all the logic to handle RPC invocations via the \texttt{process()}
+call, and takes as a parameter an instance of the service interface, as
+implemented by the application developer.
+
+The user provides an implementation of the application interface in separate,
+non-generated source code.
+
+\subsection{TServer}
+
+Finally, the Thrift core libraries provide a \texttt{TServer} abstraction.
+The \texttt{TServer} object generally works as follows.
+
+\begin{itemize}
+\item Use the \texttt{TServerTransport} to get a \texttt{TTransport}
+\item Use the \texttt{TTransportFactory} to optionally convert the primitive
+transport into a suitable application transport (typically the
+\texttt{TBufferedTransportFactory} is used here)
+\item Use the \texttt{TProtocolFactory} to create an input and output protocol
+for the \texttt{TTransport}
+\item Invoke the \texttt{process()} method of the \texttt{TProcessor} object
+\end{itemize}
+
+The layers are appropriately separated such that the server code needs to know
+nothing about any of the transports, encodings, or applications in play. The
+server encapsulates the logic around connection handling, threading, etc.
+while the processor deals with RPC. The only code written by the application
+developer lives in the definitional Thrift file and the interface
+implementation.
+
+Facebook has deployed multiple \texttt{TServer} implementations, including
+the single-threaded \texttt{TSimpleServer}, thread-per-connection
+\texttt{TThreadedServer}, and thread-pooling \texttt{TThreadPoolServer}.
+
+The \texttt{TProcessor} interface is very general by design. There is no
+requirement that a \texttt{TServer} take a generated \texttt{TProcessor}
+object. Thrift allows the application developer to easily write any type of
+server that operates on \texttt{TProtocol} objects (for instance, a server
+could simply stream a certain type of object without any actual RPC method
+invocation).
+
+\section{Implementation Details}
+\subsection{Target Languages}
+Thrift currently supports five target languages: C++, Java, Python, Ruby, and
+PHP. At Facebook, we have deployed servers predominantly in C++, Java, and
+Python. Thrift services implemented in PHP have also been embedded into the
+Apache web server, providing transparent backend access to many of our
+frontend constructs using a \texttt{THttpClient} implementation of the
+\texttt{TTransport} interface.
+
+Though Thrift was explicitly designed to be much more efficient and robust
+than typical web technologies, as we were designing our XML-based REST web
+services API we noticed that Thrift could be easily used to define our
+service interface. Though we do not currently employ SOAP envelopes (in the
+authors' opinions there is already far too much repetitive enterprise Java
+software to do that sort of thing), we were able to quickly extend Thrift to
+generate XML Schema Definition files for our service, as well as a framework
+for versioning different implementations of our web service. Though public
+web services are admittedly tangential to Thrift's core use case and design,
+Thrift facilitated rapid iteration and affords us the ability to quickly
+migrate our entire XML-based web service onto a higher performance system
+should the need arise.
+
+\subsection{Generated Structs}
+We made a conscious decision to make our generated structs as transparent as
+possible. All fields are publicly accessible; there are no \texttt{set()} and
+\texttt{get()} methods. Similarly, use of the \texttt{isset} object is not
+enforced. We do not include any \texttt{FieldNotSetException} construct.
+Developers have the option to use these fields to write more robust code, but
+the system is robust to the developer ignoring the \texttt{isset} construct
+entirely and will provide suitable default behavior in all cases.
+
+This choice was motivated by the desire to ease application development. Our stated
+goal is not to make developers learn a rich new library in their language of
+choice, but rather to generate code that allow them to work with the constructs
+that are most familiar in each language.
+
+We also made the \texttt{read()} and \texttt{write()} methods of the generated
+objects public so that the objects can be used outside of the context
+of RPC clients and servers. Thrift is a useful tool simply for generating
+objects that are easily serializable across programming languages.
+
+\subsection{RPC Method Identification}
+Method calls in RPC are implemented by sending the method name as a string. One
+issue with this approach is that longer method names require more bandwidth.
+We experimented with using fixed-size hashes to identify methods, but in the
+end concluded that the savings were not worth the headaches incurred. Reliably
+dealing with conflicts across versions of an interface definition file is
+impossible without a meta-storage system (i.e. to generate non-conflicting
+hashes for the current version of a file, we would have to know about all
+conflicts that ever existed in any previous version of the file).
+
+We wanted to avoid too many unnecessary string comparisons upon
+method invocation. To deal with this, we generate maps from strings to function
+pointers, so that invocation is effectively accomplished via a constant-time
+hash lookup in the common case. This requires the use of a couple interesting
+code constructs. Because Java does not have function pointers, process
+functions are all private member classes implementing a common interface.
+
+\begin{verbatim}
+private class ping implements ProcessFunction {
+  public void process(int seqid,
+                      TProtocol iprot,
+                      TProtocol oprot)
+    throws TException
+  { ...}
+}
+
+HashMap<String,ProcessFunction> processMap_ =
+  new HashMap<String,ProcessFunction>();
+\end{verbatim}
+
+In C++, we use a relatively esoteric language construct: member function
+pointers.
+
+\begin{verbatim}
+std::map<std::string,
+  void (ExampleServiceProcessor::*)(int32_t,
+  facebook::thrift::protocol::TProtocol*,
+  facebook::thrift::protocol::TProtocol*)>
+ processMap_;
+\end{verbatim}
+
+Using these techniques, the cost of string processing is minimized, and we
+reap the benefit of being able to easily debug corrupt or misunderstood data by
+inspecting it for known string method names.
+
+\subsection{Servers and Multithreading}
+Thrift services require basic multithreading to handle simultaneous
+requests from multiple clients. For the Python and Java implementations of
+Thrift server logic, the standard threading libraries distributed with the
+languages provide adequate support. For the C++ implementation, no standard multithread runtime
+library exists. Specifically, robust, lightweight, and portable
+thread manager and timer class implementations do not exist. We investigated
+existing implementations, namely \texttt{boost::thread},
+\texttt{boost::threadpool}, \texttt{ACE\_Thread\_Manager} and
+\texttt{ACE\_Timer}.
+
+While \texttt{boost::threads}\cite{boost.threads}  provides clean,
+lightweight and robust implementations of multi-thread primitives (mutexes,
+conditions, threads) it does not provide a thread manager or timer
+implementation.
+
+\texttt{boost::threadpool}\cite{boost.threadpool} also looked promising but
+was not far enough along for our purposes. We wanted to limit the dependency on
+third-party libraries as much as possible. Because\\
+\texttt{boost::threadpool} is
+not a pure template library and requires runtime libraries and because it is
+not yet part of the official Boost distribution we felt it was not ready for
+use in Thrift. As \texttt{boost::threadpool} evolves and especially if it is
+added to the Boost distribution we may reconsider our decision to not use it.
+
+ACE has both a thread manager and timer class in addition to multi-thread
+primitives. The biggest problem with ACE is that it is ACE. Unlike Boost, ACE
+API quality is poor. Everything in ACE has large numbers of dependencies on
+everything else in ACE - thus forcing developers to throw out standard
+classes, such as STL collections, in favor of ACE's homebrewed implementations. In
+addition, unlike Boost, ACE implementations demonstrate little understanding
+of the power and pitfalls of C++ programming and take no advantage of modern
+templating techniques to ensure compile time safety and reasonable compiler
+error messages. For all these reasons, ACE was rejected. Instead, we chose
+to implement our own library, described in the following sections.
+
+\subsection{Thread Primitives}
+
+The Thrift thread libraries are implemented in the namespace\\
+\texttt{facebook::thrift::concurrency} and have three components:
+\begin{itemize}
+\item primitives
+\item thread pool manager
+\item timer manager
+\end{itemize}
+
+As mentioned above, we were hesitant to introduce any additional dependencies
+on Thrift. We decided to use \texttt{boost::shared\_ptr} because it is so
+useful for multithreaded application, it requires no link-time or
+runtime libraries (i.e. it is a pure template library) and it is due
+to become part of the C++0x standard.
+
+We implement standard \texttt{Mutex} and \texttt{Condition} classes, and a
+ \texttt{Monitor} class. The latter is simply a combination of a mutex and
+condition variable and is analogous to the \texttt{Monitor} implementation provided for
+the Java \texttt{Object} class. This is also sometimes referred to as a barrier. We
+provide a \texttt{Synchronized} guard class to allow Java-like synchronized blocks.
+This is just a bit of syntactic sugar, but, like its Java counterpart, clearly
+delimits critical sections of code. Unlike its Java counterpart, we still
+have the ability to programmatically lock, unlock, block, and signal monitors.
+
+\begin{verbatim}
+void run() {
+ {Synchronized s(manager->monitor);
+  if (manager->state == TimerManager::STARTING) {
+    manager->state = TimerManager::STARTED;
+    manager->monitor.notifyAll();
+  }
+ }
+}
+\end{verbatim}
+
+We again borrowed from Java the distinction between a thread and a runnable
+class. A \texttt{Thread} is the actual schedulable object. The
+\texttt{Runnable} is the logic to execute within the thread.
+The \texttt{Thread} implementation deals with all the platform-specific thread
+creation and destruction issues, while the \texttt{Runnable} implementation deals
+with the application-specific per-thread logic. The benefit of this approach
+is that developers can easily subclass the Runnable class without pulling in
+platform-specific super-classes.
+
+\subsection{Thread, Runnable, and shared\_ptr}
+We use \texttt{boost::shared\_ptr} throughout the \texttt{ThreadManager} and
+\texttt{TimerManager} implementations to guarantee cleanup of dead objects that can
+be accessed by multiple threads. For \texttt{Thread} class implementations,
+\texttt{boost::shared\_ptr} usage requires particular attention to make sure
+\texttt{Thread} objects are neither leaked nor dereferenced prematurely while
+creating and shutting down threads.
+
+Thread creation requires calling into a C library. (In our case the POSIX
+thread library, \texttt{libpthread}, but the same would be true for WIN32 threads).
+Typically, the OS makes few, if any, guarantees about when \texttt{ThreadMain}, a C thread's entry-point function, will be called. Therefore, it is
+possible that our thread create call,
+\texttt{ThreadFactory::newThread()} could return to the caller
+well before that time. To ensure that the returned \texttt{Thread} object is not
+prematurely cleaned up if the caller gives up its reference prior to the
+\texttt{ThreadMain} call, the \texttt{Thread} object makes a weak referenence to
+itself in its \texttt{start} method.
+
+With the weak reference in hand the \texttt{ThreadMain} function can attempt to get
+a strong reference before entering the \texttt{Runnable::run} method of the
+\texttt{Runnable} object bound to the \texttt{Thread}. If no strong references to the
+thread are obtained between exiting \texttt{Thread::start} and entering \texttt{ThreadMain}, the weak reference returns \texttt{null} and the function
+exits immediately.
+
+The need for the \texttt{Thread} to make a weak reference to itself has a
+significant impact on the API. Since references are managed through the
+\texttt{boost::shared\_ptr} templates, the \texttt{Thread} object must have a reference
+to itself wrapped by the same \texttt{boost::shared\_ptr} envelope that is returned
+to the caller. This necessitated the use of the factory pattern.
+\texttt{ThreadFactory} creates the raw \texttt{Thread} object and a
+\texttt{boost::shared\_ptr} wrapper, and calls a private helper method of the class
+implementing the \texttt{Thread} interface (in this case, \texttt{PosixThread::weakRef})
+ to allow it to make add weak reference to itself through the
+ \texttt{boost::shared\_ptr} envelope.
+
+\texttt{Thread} and \texttt{Runnable} objects reference each other. A \texttt{Runnable}
+object may need to know about the thread in which it is executing, and a Thread, obviously,
+needs to know what \texttt{Runnable} object it is hosting. This interdependency is
+further complicated because the lifecycle of each object is independent of the
+other. An application may create a set of \texttt{Runnable} object to be reused in different threads, or it may create and forget a \texttt{Runnable} object
+once a thread has been created and started for it.
+
+The \texttt{Thread} class takes a \texttt{boost::shared\_ptr} reference to the hosted
+\texttt{Runnable} object in its constructor, while the \texttt{Runnable} class has an
+explicit \texttt{thread} method to allow explicit binding of the hosted thread.
+\texttt{ThreadFactory::newThread} binds the objects to each other.
+
+\subsection{ThreadManager}
+
+\texttt{ThreadManager} creates a pool of worker threads and
+allows applications to schedule tasks for execution as free worker threads
+become available. The \texttt{ThreadManager} does not implement dynamic
+thread pool resizing, but provides primitives so that applications can add
+and remove threads based on load. This approach was chosen because
+implementing load metrics and thread pool size is very application
+specific. For example some applications may want to adjust pool size based
+on running-average of work arrival rates that are measured via polled
+samples. Others may simply wish to react immediately to work-queue
+depth high and low water marks. Rather than trying to create a complex
+API abstract enough to capture these different approaches, we
+simply leave it up to the particular application and provide the
+primitives to enact the desired policy and sample current status.
+
+\subsection{TimerManager}
+
+\texttt{TimerManager} allows applications to schedule
+ \texttt{Runnable} objects for execution at some point in the future. Its specific task
+is to allows applications to sample \texttt{ThreadManager} load at regular
+intervals and make changes to the thread pool size based on application policy.
+Of course, it can be used to generate any number of timer or alarm events.
+
+The default implementation of \texttt{TimerManager} uses a single thread to
+execute expired \texttt{Runnable} objects. Thus, if a timer operation needs to
+do a large amount of work and especially if it needs to do blocking I/O,
+that should be done in a separate thread.
+
+\subsection{Nonblocking Operation}
+Though the Thrift transport interfaces map more directly to a blocking I/O
+model, we have implemented a high performance \texttt{TNonBlockingServer}
+in C++ based on \texttt{libevent} and the \texttt{TFramedTransport}. We
+implemented this by moving all I/O into one tight event loop using a
+state machine. Essentially, the event loop reads framed requests into
+\texttt{TMemoryBuffer} objects. Once entire requests are ready, they are
+dispatched to the \texttt{TProcessor} object which can read directly from
+the data in memory.
+
+\subsection{Compiler}
+The Thrift compiler is implemented in C++ using standard \texttt{lex}/\texttt{yacc}
+lexing and parsing. Though it could have been implemented with fewer
+lines of code in another language (i.e. Python Lex-Yacc (PLY) or \texttt{ocamlyacc}), using C++
+forces explicit definition of the language constructs. Strongly typing the
+parse tree elements (debatably) makes the code more approachable for new
+developers.
+
+Code generation is done using two passes. The first pass looks only for
+include files and type definitions. Type definitions are not checked during
+this phase, since they may depend upon include files. All included files
+are sequentially scanned in a first pass. Once the include tree has been
+resolved, a second pass over all files is taken that inserts type definitions
+into the parse tree and raises an error on any undefined types. The program is
+then generated against the parse tree.
+
+Due to inherent complexities and potential for circular dependencies,
+we explicitly disallow forward declaration. Two Thrift structs cannot
+each contain an instance of the other. (Since we do not allow \texttt{null}
+struct instances in the generated C++ code, this would actually be impossible.)
+
+\subsection{TFileTransport}
+The \texttt{TFileTransport} logs Thrift requests/structs by
+framing incoming data with its length and writing it out to disk.
+Using a framed on-disk format allows for better error checking and
+helps with the processing of a finite number of discrete events. The\\
+\texttt{TFileWriterTransport} uses a system of swapping in-memory buffers
+to ensure good performance while logging large amounts of data.
+A Thrift log file is split up into chunks of a specified size; logged messages
+are not allowed to cross chunk boundaries. A message that would cross a chunk
+boundary will cause padding to be added until the end of the chunk and the
+first byte of the message are aligned to the beginning of the next chunk.
+Partitioning the file into chunks makes it possible to read and interpret data
+from a particular point in the file.
+
+\section{Facebook Thrift Services}
+Thrift has been employed in a large number of applications at Facebook, including
+search, logging, mobile, ads and the developer platform. Two specific usages are discussed below.
+
+\subsection{Search}
+Thrift is used as the underlying protocol and transport layer for the Facebook Search service.
+The multi-language code generation is well suited for search because it allows for application
+development in an efficient server side language (C++) and allows the Facebook PHP-based web application
+to make calls to the search service using Thrift PHP libraries. There is also a large
+variety of search stats, deployment and testing functionality that is built on top
+of generated Python code. Additionally, the Thrift log file format is
+used as a redo log for providing real-time search index updates. Thrift has allowed the
+search team to leverage each language for its strengths and to develop code at a rapid pace.
+
+\subsection{Logging}
+The Thrift \texttt{TFileTransport} functionality is used for structured logging. Each
+service function definition along with its parameters can be considered to be
+a structured log entry identified by the function name. This log can then be used for
+a variety of purposes, including inline and offline processing, stats aggregation and as a redo log.
+
+\section{Conclusions}
+Thrift has enabled Facebook to build scalable backend
+services efficiently by enabling engineers to divide and conquer. Application
+developers can focus on application code without worrying about the
+sockets layer. We avoid duplicated work by writing buffering and I/O logic
+in one place, rather than interspersing it in each application.
+
+Thrift has been employed in a wide variety of applications at Facebook,
+including search, logging, mobile, ads, and the developer platform. We have
+found that the marginal performance cost incurred by an extra layer of
+software abstraction is far eclipsed by the gains in developer efficiency and
+systems reliability.
+
+\appendix
+
+\section{Similar Systems}
+The following are software systems similar to Thrift. Each is (very!) briefly
+described:
+
+\begin{itemize}
+\item \textit{SOAP.} XML-based. Designed for web services via HTTP, excessive
+XML parsing overhead.
+\item \textit{CORBA.} Relatively comprehensive, debatably overdesigned and
+heavyweight. Comparably cumbersome software installation.
+\item \textit{COM.} Embraced mainly in Windows client softare. Not an entirely
+open solution.
+\item \textit{Pillar.} Lightweight and high-performance, but missing versioning
+and abstraction.
+\item \textit{Protocol Buffers.} Closed-source, owned by Google. Described in
+Sawzall paper.
+\end{itemize}
+
+\acks
+
+Many thanks for feedback on Thrift (and extreme trial by fire) are due to
+Martin Smith, Karl Voskuil and Yishan Wong.
+
+Thrift is a successor to Pillar, a similar system developed
+by Adam D'Angelo, first while at Caltech and continued later at Facebook.
+Thrift simply would not have happened without Adam's insights.
+
+\begin{thebibliography}{}
+
+\bibitem{boost.threads}
+Kempf, William,
+``Boost.Threads'',
+\url{http://www.boost.org/doc/html/threads.html}
+
+\bibitem{boost.threadpool}
+Henkel, Philipp,
+``threadpool'',
+\url{http://threadpool.sourceforge.net}
+
+\end{thebibliography}
+
+\end{document}