diff --git a/REVIEWING.rst b/REVIEWING.rst
index e07e358..4c63aa0 100644
--- a/REVIEWING.rst
+++ b/REVIEWING.rst
@@ -160,13 +160,11 @@
 When to approve
 ---------------
 * It's OK to hold off on an approval until a subject matter expert reviews it.
-* Every patch needs two +2's before being approved.
-* However, a single Tempest core reviewer can approve patches without waiting
-  for another +2 in the following cases:
+* Every patch needs at least single +2's before being approved. A single
+  Tempest core reviewer can approve patches but can always wait for another
+  +2 in any case. Following cases where single +2 can be used without any
+  issue:
 
-  * If a patch has already been approved but requires a trivial rebase to
-    merge, then there is no need to wait for a second +2, since the patch has
-    already had two +2's.
   * If any trivial patch set fixes one of the items below:
 
     * Documentation or code comment typo
@@ -187,7 +185,4 @@
     voting ``tempest-tox-plugin-sanity-check`` job) and unblock the
     tempest gate
 
-  Note that such a policy should be used judiciously, as we should strive to
-  have two +2's on each patch set, prior to approval.
-
 .. _example: https://review.opendev.org/#/c/611032/
diff --git a/doc/source/contributor/contributing.rst b/doc/source/contributor/contributing.rst
index 9c79a1f..62953ff 100644
--- a/doc/source/contributor/contributing.rst
+++ b/doc/source/contributor/contributing.rst
@@ -43,10 +43,9 @@
 
 Getting Your Patch Merged
 ~~~~~~~~~~~~~~~~~~~~~~~~~
-All changes proposed to the Tempest require two ``Code-Review +2`` votes from
-Tempest core reviewers before one of the core reviewers can approve the patch by
-giving ``Workflow +1`` vote. More detailed guidelines for reviewers are available
-at :doc:`../REVIEWING`.
+All changes proposed to the Tempest require single ``Code-Review +2`` votes from
+Tempest core reviewers by giving ``Workflow +1`` vote. More detailed guidelines
+for reviewers are available at :doc:`../REVIEWING`.
 
 Project Team Lead Duties
 ~~~~~~~~~~~~~~~~~~~~~~~~
diff --git a/doc/source/data/tempest-blacklisted-plugins-registry.header b/doc/source/data/tempest-non-active-plugins-registry.header
similarity index 67%
rename from doc/source/data/tempest-blacklisted-plugins-registry.header
rename to doc/source/data/tempest-non-active-plugins-registry.header
index 6b6af11..06d8eaa 100644
--- a/doc/source/data/tempest-blacklisted-plugins-registry.header
+++ b/doc/source/data/tempest-non-active-plugins-registry.header
@@ -1,7 +1,7 @@
-Blacklisted Plugins
+Non Active Plugins
 ===================
 
 List of Tempest plugin projects that are stale or unmaintained for a long
-time (6 months or more). They can be moved out of blacklist state once one
+time (6 months or more). They can be moved out of nonactivelist state once one
 of the relevant patches gets merged:
 https://review.opendev.org/#/q/topic:tempest-sanity-gate+%28status:open%29
diff --git a/doc/source/microversion_testing.rst b/doc/source/microversion_testing.rst
index c1981f9..06062c2 100644
--- a/doc/source/microversion_testing.rst
+++ b/doc/source/microversion_testing.rst
@@ -302,6 +302,10 @@
 
   .. _2.2: https://docs.openstack.org/nova/latest/reference/api-microversion-history.html#id2
 
+  * `2.3`_
+
+  .. _2.3: http://docs.openstack.org/developer/nova/api_microversion_history.html#maximum-in-kilo
+
   * `2.6`_
 
   .. _2.6: https://docs.openstack.org/nova/latest/reference/api-microversion-history.html#id5
diff --git a/doc/source/overview.rst b/doc/source/overview.rst
index e51b90b..2eaf72f 100644
--- a/doc/source/overview.rst
+++ b/doc/source/overview.rst
@@ -113,7 +113,7 @@
    There is also the option to use `stestr`_ directly. For example, from
    the workspace dir run::
 
-    $ stestr run --black-regex '\[.*\bslow\b.*\]' '^tempest\.(api|scenario)'
+    $ stestr run --exclude-regex '\[.*\bslow\b.*\]' '^tempest\.(api|scenario)'
 
    will run the same set of tests as the default gate jobs. Or you can
    use `unittest`_ compatible test runners such as `stestr`_, `pytest`_ etc.
diff --git a/doc/source/stable_branch_support_policy.rst b/doc/source/stable_branch_support_policy.rst
index 87e3ad1..9c2d1ed 100644
--- a/doc/source/stable_branch_support_policy.rst
+++ b/doc/source/stable_branch_support_policy.rst
@@ -20,7 +20,7 @@
 testing branches in these phases, it's possible that we'll introduce changes to
 Tempest on master which will break support on *Extended Maintenance* phase
 branches. When this happens the expectation for those branches is to either
-switch to running Tempest from a tag with support for the branch, or blacklist
+switch to running Tempest from a tag with support for the branch, or exclude
 a newly introduced test (if that is the cause of the issue). Tempest will not
 be creating stable branches to support *Extended Maintenance* phase branches, as
 the burden is on the *Extended Maintenance* phase branche maintainers, not the Tempest
diff --git a/etc/whitelist.yaml b/etc/allow-list.yaml
similarity index 100%
rename from etc/whitelist.yaml
rename to etc/allow-list.yaml
diff --git a/etc/rbac-persona-accounts.yaml.sample b/etc/rbac-persona-accounts.yaml.sample
new file mode 100644
index 0000000..0b59538
--- /dev/null
+++ b/etc/rbac-persona-accounts.yaml.sample
@@ -0,0 +1,108 @@
+- user_domain_name: Default
+  password: password
+  roles:
+    - admin
+  username: tempest-system-admin-1
+  system: all
+- user_domain_name: Default
+  password: password
+  username: tempest-system-member-1
+  roles:
+    - member
+  system: all
+- user_domain_name: Default
+  password: password
+  username: tempest-system-reader-1
+  roles:
+    - reader
+  system: all
+- user_domain_name: Default
+  password: password
+  domain_name: tempest-test-domain
+  username: tempest-domain-admin-1
+  roles:
+    - admin
+- user_domain_name: Default
+  password: password
+  domain_name: tempest-test-domain
+  username: tempest-domain-member-1
+  roles:
+    - member
+- user_domain_name: Default
+  password: password
+  domain_name: tempest-test-domain
+  username: tempest-domain-reader-1
+  roles:
+    - reader
+- user_domain_name: Default
+  password: password
+  project_name: tempest-test-project
+  username: tempest-project-admin-1
+  roles:
+    - admin
+- user_domain_name: Default
+  password: password
+  project_name: tempest-test-project
+  username: tempest-project-member-1
+  roles:
+    - member
+- user_domain_name: Default
+  password: password
+  project_name: tempest-test-project
+  username: tempest-project-reader-1
+  roles:
+    - reader
+- user_domain_name: Default
+  password: password
+  username: tempest-system-admin-2
+  roles:
+    - admin
+  system: all
+- user_domain_name: Default
+  password: password
+  username: tempest-system-member-2
+  roles:
+    - member
+  system: all
+- user_domain_name: Default
+  password: password
+  system: all
+  username: tempest-system-reader-2
+  roles:
+    - reader
+- user_domain_name: Default
+  password: password
+  domain_name: tempest-test-domain
+  username: tempest-domain-admin-2
+  roles:
+    - admin
+- user_domain_name: Default
+  password: password
+  domain_name: tempest-test-domain
+  username: tempest-domain-member-2
+  roles:
+    - member
+- user_domain_name: Default
+  password: password
+  domain_name: tempest-test-domain
+  username: tempest-domain-reader-2
+  roles:
+    - reader
+- user_domain_name: Default
+  password: password
+  project_name: tempest-test-project
+  username: tempest-project-admin-2
+  roles:
+    - admin
+- user_domain_name: Default
+  password: password
+  project_name: tempest-test-project
+  username: tempest-project-member-2
+  roles:
+    - member
+- user_domain_name: Default
+  password: password
+  project_name: tempest-test-project
+  username: tempest-project-reader-2
+  roles:
+    - reader
diff --git a/releasenotes/notes/Add-keystone-v3-OS_FEDERATION-APIs-as-tempest-clients-fe9e10a0fe5f09d4.yaml b/releasenotes/notes/Add-keystone-v3-OS_FEDERATION-APIs-as-tempest-clients-fe9e10a0fe5f09d4.yaml
new file mode 100644
index 0000000..33df7c4
--- /dev/null
+++ b/releasenotes/notes/Add-keystone-v3-OS_FEDERATION-APIs-as-tempest-clients-fe9e10a0fe5f09d4.yaml
@@ -0,0 +1,10 @@
+---
+features:
+  - |
+    The following tempest clients for keystone v3 OS_FEDERATION API were
+    implemented in this release
+
+    * identity_providers
+    * protocols
+    * mappings
+    * service_providers
diff --git a/releasenotes/notes/Inclusive-jargon-17621346744f0cf4.yaml b/releasenotes/notes/Inclusive-jargon-17621346744f0cf4.yaml
new file mode 100644
index 0000000..089569e
--- /dev/null
+++ b/releasenotes/notes/Inclusive-jargon-17621346744f0cf4.yaml
@@ -0,0 +1,13 @@
+---
+deprecations:
+  - |
+    In this release the following tempest arguments are deprecated and
+    replaced by new ones which are functionally equivalent:
+
+     * --black-regex is replaced by --exclude-regex
+     * --blacklist-file is replaced by --exclude-list
+     * --whitelist-file is replaced by --include-list
+
+    For now Tempest supports both (new and old ones) in order to make the
+    transition for all consumers smoother. However, that's just a temporary
+    case and the old options will be removed soon.
diff --git a/releasenotes/notes/Remove-manager-2e0b0af48f01294a.yaml b/releasenotes/notes/Remove-manager-2e0b0af48f01294a.yaml
new file mode 100644
index 0000000..822df7d
--- /dev/null
+++ b/releasenotes/notes/Remove-manager-2e0b0af48f01294a.yaml
@@ -0,0 +1,5 @@
+---
+upgrade:
+  - |
+    In this release tempest/manager.py is removed after more than 4 years
+    of deprecation.
diff --git a/releasenotes/notes/add-identity-roles-system-methods-519dc144231993a3.yaml b/releasenotes/notes/add-identity-roles-system-methods-519dc144231993a3.yaml
new file mode 100644
index 0000000..1840c10
--- /dev/null
+++ b/releasenotes/notes/add-identity-roles-system-methods-519dc144231993a3.yaml
@@ -0,0 +1,13 @@
+---
+features:
+  - |
+    Added methods to the identity v3 roles client to support:
+
+    - PUT /v3/system/users/{user}/roles/{role}
+    - GET /v3/system/users/{user}/roles
+    - GET /v3/system/users/{user}/roles/{role}
+    - DELETE /v3/system/users/{user}/roles/{role}
+    - PUT /v3/system/groups/{group}/roles/{role}
+    - GET /v3/system/groups/{group}/roles
+    - GET /v3/system/groups/{group}/roles/{role}
+    - DELETE /v3/system/groups/{group}/roles/{role}
diff --git a/releasenotes/notes/create_loginable_secgroup_rule-73722fd4b4eb12d0.yaml b/releasenotes/notes/create_loginable_secgroup_rule-73722fd4b4eb12d0.yaml
new file mode 100644
index 0000000..e53411d
--- /dev/null
+++ b/releasenotes/notes/create_loginable_secgroup_rule-73722fd4b4eb12d0.yaml
@@ -0,0 +1,6 @@
+---
+features:
+  - |
+    Added public interface create_loginable_secgroup_rule().
+    Since this interface is meant to be used by tempest plugins,
+    It doesn't neccessarily require to be private api.
diff --git a/releasenotes/notes/create_security_group_rule-16d58a8f0f0ff262.yaml b/releasenotes/notes/create_security_group_rule-16d58a8f0f0ff262.yaml
new file mode 100644
index 0000000..3354f65
--- /dev/null
+++ b/releasenotes/notes/create_security_group_rule-16d58a8f0f0ff262.yaml
@@ -0,0 +1,6 @@
+---
+features:
+  - |
+    Added public interface create_security_group_rule().
+    Since this interface is meant to be used by tempest plugins,
+    It doesn't neccessarily require to be private api.
diff --git a/releasenotes/notes/log_console_output-dae6b8740b5a5821.yaml b/releasenotes/notes/log_console_output-dae6b8740b5a5821.yaml
new file mode 100644
index 0000000..2779b26
--- /dev/null
+++ b/releasenotes/notes/log_console_output-dae6b8740b5a5821.yaml
@@ -0,0 +1,8 @@
+---
+features:
+  - |
+    Added public interface log_console_output().
+    It used to be a private method with name _log_console_output().
+    Since this interface is meant to be used by tempest plugins,
+    It doesn't neccessarily require to be private api.
+
diff --git a/releasenotes/notes/merge-tempest-horizon-plugin-39d555339ab8c7ce.yaml b/releasenotes/notes/merge-tempest-horizon-plugin-39d555339ab8c7ce.yaml
new file mode 100644
index 0000000..ff406fb
--- /dev/null
+++ b/releasenotes/notes/merge-tempest-horizon-plugin-39d555339ab8c7ce.yaml
@@ -0,0 +1,6 @@
+---
+prelude: >
+    The integrated horizon dashboard test is now moved
+    from tempest-horizon plugin into Tempest. You do not need
+    to install tempest-horizon to run the horizon test which
+    can be run using Tempest itself.
diff --git a/releasenotes/notes/random-bytes-size-limit-ee94a8c6534fe916.yaml b/releasenotes/notes/random-bytes-size-limit-ee94a8c6534fe916.yaml
new file mode 100644
index 0000000..42322e4
--- /dev/null
+++ b/releasenotes/notes/random-bytes-size-limit-ee94a8c6534fe916.yaml
@@ -0,0 +1,9 @@
+---
+upgrade:
+  - |
+    The ``tempest.lib.common.utils.data_utils.random_bytes()`` helper
+    function will no longer allow a ``size`` of more than 1MiB. Tests
+    generally do not need to generate and use large payloads for
+    feature verification and it is easy to lose track of and duplicate
+    large buffers. The sum total of such errors can become problematic
+    in paralllelized and constrained CI environments.
diff --git a/releasenotes/notes/system-scope-44244cc955a7825f.yaml b/releasenotes/notes/system-scope-44244cc955a7825f.yaml
new file mode 100644
index 0000000..969a71f
--- /dev/null
+++ b/releasenotes/notes/system-scope-44244cc955a7825f.yaml
@@ -0,0 +1,7 @@
+---
+features:
+  - |
+    Adds new personas that can be used to test service policies for all
+    default scopes (project, domain, and system) and roles (reader, member,
+    and admin). Both dynamic credentials and pre-provisioned credentials are
+    supported.
diff --git a/roles/run-tempest/README.rst b/roles/run-tempest/README.rst
index 3643edb..f9fcf28 100644
--- a/roles/run-tempest/README.rst
+++ b/roles/run-tempest/README.rst
@@ -32,7 +32,11 @@
 
 .. zuul:rolevar:: tempest_test_blacklist
 
-   Specifies a blacklist file to skip tests that are not needed.
+   DEPRECATED option, please use tempest_test_exclude_list instead.
+
+.. zuul:rolevar:: tempest_test_exclude_list
+
+   Specifies an excludelist file to skip tests that are not needed.
 
    Pass a full path to the file.
 
@@ -44,6 +48,11 @@
 .. zuul:rolevar:: tempest_black_regex
    :default: ''
 
+   DEPRECATED option, please use tempest_exclude_regex instead.
+
+.. zuul:rolevar:: tempest_exclude_regex
+   :default: ''
+
    A regular expression used to skip the tests.
 
    It works only when used with some specific tox environments
@@ -51,7 +60,7 @@
 
        ::
            vars:
-             tempest_black_regex: (tempest.api.identity).*$
+             tempest_exclude_regex: (tempest.api.identity).*$
 
 .. zuul:rolevar:: tox_extra_args
    :default: ''
diff --git a/roles/run-tempest/defaults/main.yaml b/roles/run-tempest/defaults/main.yaml
index 5867b6c..52713be 100644
--- a/roles/run-tempest/defaults/main.yaml
+++ b/roles/run-tempest/defaults/main.yaml
@@ -1,7 +1,6 @@
 devstack_base_dir: /opt/stack
 tempest_test_regex: ''
 tox_envlist: smoke
-tempest_black_regex: ''
 tox_extra_args: ''
 tempest_test_timeout: ''
 stable_constraints_file: "{{ devstack_base_dir }}/requirements/upper-constraints.txt"
diff --git a/roles/run-tempest/tasks/main.yaml b/roles/run-tempest/tasks/main.yaml
index 1de3725..999e256 100644
--- a/roles/run-tempest/tasks/main.yaml
+++ b/roles/run-tempest/tasks/main.yaml
@@ -36,6 +36,9 @@
     tempest_tox_environment: "{{ tempest_tox_environment | combine({'OS_TEST_TIMEOUT': tempest_test_timeout}) }}"
   when: tempest_test_timeout != ''
 
+# TODO(kopecmartin) remove the following 'when block' after all consumers of
+# the role have switched to tempest_test_exclude_list option, until then it's
+# kept here for backward compatibility
 - when:
     - tempest_test_blacklist is defined
   block:
@@ -50,10 +53,42 @@
         blacklist_option: "--blacklist-file={{ tempest_test_blacklist|quote }}"
       when: blacklist_stat.stat.exists
 
+- when:
+    - tempest_test_exclude_list is defined
+  block:
+    - name: Check for test exclude list file
+      stat:
+        path: "{{ tempest_test_exclude_list }}"
+      register:
+        exclude_list_stat
+
+    - name: Build exclude list option
+      set_fact:
+        exclude_list_option: "--exclude-list={{ tempest_test_exclude_list|quote }}"
+      when: exclude_list_stat.stat.exists
+
+# TODO(kopecmartin) remove this after all consumers of the role have switched
+# to tempest_exclude_regex option, until then it's kept here for the backward
+# compatibility
+- name: Build exclude regex (old param)
+  set_fact:
+    tempest_test_exclude_regex: "--black-regex={{tempest_black_regex|quote}}"
+  when:
+    - tempest_black_regex is defined
+    - tempest_exclude_regex is not defined
+
+- name: Build exclude regex (new param)
+  set_fact:
+    tempest_test_exclude_regex: "--exclude-regex={{tempest_exclude_regex|quote}}"
+  when:
+    - tempest_black_regex is not defined
+    - tempest_exclude_regex is defined
+
 - name: Run Tempest
-  command: tox -e {{tox_envlist}} {{tox_extra_args}} -- {{tempest_test_regex|quote}} {{blacklist_option|default('')}} \
+  command: tox -e {{tox_envlist}} {{tox_extra_args}} -- {{tempest_test_regex|quote}} \
+           {{blacklist_option|default('')}}  {{exclude_list_option|default('')}} \
             --concurrency={{tempest_concurrency|default(default_concurrency)}} \
-            --black-regex={{tempest_black_regex|quote}}
+           {{tempest_test_exclude_regex|default('')}}
   args:
     chdir: "{{devstack_base_dir}}/tempest"
   register: tempest_run_result
diff --git a/tempest/api/compute/images/test_images_oneserver_negative.py b/tempest/api/compute/images/test_images_oneserver_negative.py
index 0296220..275a26f 100644
--- a/tempest/api/compute/images/test_images_oneserver_negative.py
+++ b/tempest/api/compute/images/test_images_oneserver_negative.py
@@ -110,20 +110,30 @@
         Creating another server image when first image is being saved is
         not allowed.
         """
-        # Create first snapshot
-        image = self.create_image_from_server(self.server_id)
-        self.addCleanup(self._reset_server)
+        try:
+            # Create first snapshot
+            image = self.create_image_from_server(self.server_id)
+            self.addCleanup(self._reset_server)
 
-        # Create second snapshot
-        self.assertRaises(lib_exc.Conflict, self.create_image_from_server,
-                          self.server_id)
+            # Create second snapshot
+            self.assertRaises(lib_exc.Conflict, self.create_image_from_server,
+                              self.server_id)
 
-        if api_version_utils.compare_version_header_to_response(
-            "OpenStack-API-Version", "compute 2.45", image.response, "lt"):
-            image_id = image['image_id']
-        else:
-            image_id = data_utils.parse_image_id(image.response['location'])
-        self.client.delete_image(image_id)
+            if api_version_utils.compare_version_header_to_response(
+                "OpenStack-API-Version", "compute 2.45", image.response, "lt"):
+                image_id = image['image_id']
+            else:
+                image_id = data_utils.parse_image_id(
+                    image.response['location'])
+            self.client.delete_image(image_id)
+
+        except lib_exc.TimeoutException as ex:
+            # Test cannot capture the image saving state.
+            # If timeout is reached, we don't need to check state,
+            # since, it wouldn't be a 'SAVING' state atleast and apart from
+            # it, this testcase doesn't have scope for other state transition
+            # Hence, skip the test.
+            raise self.skipException("This test is skipped because " + str(ex))
 
     @decorators.attr(type=['negative'])
     @decorators.idempotent_id('084f0cbc-500a-4963-8a4e-312905862581')
diff --git a/tempest/api/image/v2/test_images.py b/tempest/api/image/v2/test_images.py
index 9e25901..ca72388 100644
--- a/tempest/api/image/v2/test_images.py
+++ b/tempest/api/image/v2/test_images.py
@@ -90,7 +90,7 @@
         self.assertEqual('uploading', body['status'])
         # import image from staging to backend
         self.client.image_import(image['id'], method='glance-direct')
-        self.client.wait_for_resource_activation(image['id'])
+        waiters.wait_for_image_imported_to_stores(self.client, image['id'])
 
     @decorators.idempotent_id('f6feb7a4-b04f-4706-a011-206129f83e62')
     def test_image_web_download_import(self):
@@ -111,7 +111,7 @@
         image_uri = CONF.image.http_image
         self.client.image_import(image['id'], method='web-download',
                                  image_uri=image_uri)
-        self.client.wait_for_resource_activation(image['id'])
+        waiters.wait_for_image_imported_to_stores(self.client, image['id'])
 
 
 class MultiStoresImportImagesTest(base.BaseV2ImageTest):
@@ -158,7 +158,7 @@
 
         self.client.stage_image_file(
             image['id'],
-            six.BytesIO(data_utils.random_bytes(10485760)))
+            six.BytesIO(data_utils.random_bytes()))
         # Check image status is 'uploading'
         body = self.client.show_image(image['id'])
         self.assertEqual(image['id'], body['id'])
diff --git a/tempest/api/image/v2/test_images_negative.py b/tempest/api/image/v2/test_images_negative.py
index dc2bb96..810c37c 100644
--- a/tempest/api/image/v2/test_images_negative.py
+++ b/tempest/api/image/v2/test_images_negative.py
@@ -15,10 +15,13 @@
 #    under the License.
 
 from tempest.api.image import base
+from tempest import config
 from tempest.lib.common.utils import data_utils
 from tempest.lib import decorators
 from tempest.lib import exceptions as lib_exc
 
+CONF = config.CONF
+
 
 class ImagesNegativeTest(base.BaseV2ImageTest):
 
@@ -114,3 +117,42 @@
         self.assertRaises(lib_exc.Forbidden,
                           self.client.delete_image,
                           image['id'])
+
+    @decorators.attr(type=['negative'])
+    @decorators.idempotent_id('a0ae75d4-ce9c-4576-b823-aba04c8acabd')
+    def test_update_image_reserved_property(self):
+        """Attempt to add a reserved property to an image.
+
+        Glance bans some internal-use-only properties such that they will
+        cause a PATCH to fail. Since os_glance_* is banned, we can use a
+        key in that namespace here.
+        """
+        if not CONF.image_feature_enabled.os_glance_reserved:
+            raise self.skipException('os_glance_reserved is not enabled')
+
+        image = self.create_image(name='test',
+                                  container_format='bare',
+                                  disk_format='raw')
+        self.assertRaises(lib_exc.Forbidden,
+                          self.client.update_image,
+                          image['id'], [{'add': '/os_glance_foo',
+                                         'value': 'bar'}])
+
+    @decorators.attr(type=['negative'])
+    @decorators.idempotent_id('e3fb7df8-2742-4143-8976-f1b26870f0a0')
+    def test_create_image_reserved_property(self):
+        """Attempt to create an image with a reserved property.
+
+        Glance bans some internal-use-only properties such that they will
+        cause an image create to fail. Since os_glance_* is banned, we can
+        use a key in that namespace here.
+        """
+        if not CONF.image_feature_enabled.os_glance_reserved:
+            raise self.skipException('os_glance_reserved is not enabled')
+
+        self.assertRaises(lib_exc.Forbidden,
+                          self.create_image,
+                          name='test',
+                          container_format='bare',
+                          disk_format='raw',
+                          os_glance_foo='bar')
diff --git a/tempest/cmd/run.py b/tempest/cmd/run.py
index 8bebce2..2669ff7 100644
--- a/tempest/cmd/run.py
+++ b/tempest/cmd/run.py
@@ -22,10 +22,10 @@
 * ``--regex/-r``: This is a selection regex like what stestr uses. It will run
   any tests that match on re.match() with the regex
 * ``--smoke/-s``: Run all the tests tagged as smoke
-* ``--black-regex``: It allows to do simple test exclusion via passing a
-  rejection/black regexp
+* ``--exclude-regex``: It allows to do simple test exclusion via passing a
+  rejection/exclude regexp
 
-There are also the ``--blacklist-file`` and ``--whitelist-file`` options that
+There are also the ``--exclude-list`` and ``--include-list`` options that
 let you pass a filepath to tempest run with the file format being a line
 separated regex, with '#' used to signify the start of a comment on a line.
 For example::
@@ -128,6 +128,7 @@
 import sys
 
 from cliff import command
+from oslo_log import log
 from oslo_serialization import jsonutils as json
 from stestr import commands
 
@@ -141,6 +142,8 @@
 CONF = config.CONF
 SAVED_STATE_JSON = "saved_state.json"
 
+LOG = log.getLogger(__name__)
+
 
 class TempestRun(command.Command):
 
@@ -201,23 +204,71 @@
             self._init_state()
 
         regex = self._build_regex(parsed_args)
+
+        # temporary method for parsing deprecated and new stestr options
+        # and showing warning messages in order to make the transition
+        # smoother for all tempest consumers
+        # TODO(kopecmartin) remove this after stestr>=3.1.0 is used
+        # in all supported OpenStack releases
+        def parse_dep(old_o, old_v, new_o, new_v):
+            ret = ''
+            if old_v:
+                LOG.warning("'%s' option is deprecated, use '%s' instead "
+                            "which is functionally equivalent. Right now "
+                            "Tempest still supports this option for "
+                            "backward compatibility, however, it will be "
+                            "removed soon.",
+                            old_o, new_o)
+                ret = old_v
+            if old_v and new_v:
+                # both options are specified
+                LOG.warning("'%s' and '%s' are specified at the same time, "
+                            "'%s' takes precedence over '%s'",
+                            new_o, old_o, new_o, old_o)
+            if new_v:
+                ret = new_v
+            return ret
+        ex_regex = parse_dep('--black-regex', parsed_args.black_regex,
+                             '--exclude-regex', parsed_args.exclude_regex)
+        ex_list = parse_dep('--blacklist-file', parsed_args.blacklist_file,
+                            '--exclude-list', parsed_args.exclude_list)
+        in_list = parse_dep('--whitelist-file', parsed_args.whitelist_file,
+                            '--include-list', parsed_args.include_list)
+
         return_code = 0
         if parsed_args.list_tests:
-            return_code = commands.list_command(
-                filters=regex, whitelist_file=parsed_args.whitelist_file,
-                blacklist_file=parsed_args.blacklist_file,
-                black_regex=parsed_args.black_regex)
+            try:
+                return_code = commands.list_command(
+                    filters=regex, include_list=in_list,
+                    exclude_list=ex_list, exclude_regex=ex_regex)
+            except TypeError:
+                # exclude_list, include_list and exclude_regex are defined only
+                # in stestr >= 3.1.0, this except block catches the case when
+                # tempest is executed with an older stestr
+                return_code = commands.list_command(
+                    filters=regex, whitelist_file=in_list,
+                    blacklist_file=ex_list, black_regex=ex_regex)
 
         else:
             serial = not parsed_args.parallel
-            return_code = commands.run_command(
-                filters=regex, subunit_out=parsed_args.subunit,
-                serial=serial, concurrency=parsed_args.concurrency,
-                blacklist_file=parsed_args.blacklist_file,
-                whitelist_file=parsed_args.whitelist_file,
-                black_regex=parsed_args.black_regex,
-                worker_path=parsed_args.worker_file,
-                load_list=parsed_args.load_list, combine=parsed_args.combine)
+            params = {
+                'filters': regex, 'subunit_out': parsed_args.subunit,
+                'serial': serial, 'concurrency': parsed_args.concurrency,
+                'worker_path': parsed_args.worker_file,
+                'load_list': parsed_args.load_list,
+                'combine': parsed_args.combine
+            }
+            try:
+                return_code = commands.run_command(
+                    **params, exclude_list=ex_list,
+                    include_list=in_list, exclude_regex=ex_regex)
+            except TypeError:
+                # exclude_list, include_list and exclude_regex are defined only
+                # in stestr >= 3.1.0, this except block catches the case when
+                # tempest is executed with an older stestr
+                return_code = commands.run_command(
+                    **params, blacklist_file=ex_list,
+                    whitelist_file=in_list, black_regex=ex_regex)
             if return_code > 0:
                 sys.exit(return_code)
         return return_code
@@ -271,15 +322,38 @@
                            help='A normal stestr selection regex used to '
                                 'specify a subset of tests to run')
         parser.add_argument('--black-regex', dest='black_regex',
+                            help='DEPRECATED: This option is deprecated and '
+                                 'will be removed soon, use --exclude-regex '
+                                 'which is functionally equivalent. If this '
+                                 'is specified at the same time as '
+                                 '--exclude-regex, this flag will be ignored '
+                                 'and --exclude-regex will be used')
+        parser.add_argument('--exclude-regex', dest='exclude_regex',
                             help='A regex to exclude tests that match it')
         parser.add_argument('--whitelist-file', '--whitelist_file',
-                            help="Path to a whitelist file, this file "
-                            "contains a separate regex on each "
-                            "newline.")
+                            help='DEPRECATED: This option is deprecated and '
+                                 'will be removed soon, use --include-list '
+                                 'which is functionally equivalent. If this '
+                                 'is specified at the same time as '
+                                 '--include-list, this flag will be ignored '
+                                 'and --include-list will be used')
+        parser.add_argument('--include-list', '--include_list',
+                            help="Path to an include file which contains the "
+                                 "regex for tests to be included in tempest "
+                                 "run, this file contains a separate regex on "
+                                 "each newline.")
         parser.add_argument('--blacklist-file', '--blacklist_file',
-                            help='Path to a blacklist file, this file '
-                                 'contains a separate regex exclude on '
-                                 'each newline')
+                            help='DEPRECATED: This option is deprecated and '
+                                 'will be removed soon, use --exclude-list '
+                                 'which is functionally equivalent. If this '
+                                 'is specified at the same time as '
+                                 '--exclude-list, this flag will be ignored '
+                                 'and --exclude-list will be used')
+        parser.add_argument('--exclude-list', '--exclude_list',
+                            help='Path to an exclude file which contains the '
+                                 'regex for tests to be excluded in tempest '
+                                 'run, this file contains a separate regex on '
+                                 'each newline.')
         parser.add_argument('--load-list', '--load_list',
                             help='Path to a non-regex whitelist file, '
                                  'this file contains a separate test '
diff --git a/tempest/common/utils/__init__.py b/tempest/common/utils/__init__.py
index 914acf7..38881ee 100644
--- a/tempest/common/utils/__init__.py
+++ b/tempest/common/utils/__init__.py
@@ -59,6 +59,7 @@
         # So we should set this True here.
         'identity': True,
         'object_storage': CONF.service_available.swift,
+        'dashboard': CONF.service_available.horizon,
     }
     return service_list
 
diff --git a/tempest/common/waiters.py b/tempest/common/waiters.py
index e3c33c7..eaac05e 100644
--- a/tempest/common/waiters.py
+++ b/tempest/common/waiters.py
@@ -193,26 +193,34 @@
     raise lib_exc.TimeoutException(message)
 
 
-def wait_for_image_imported_to_stores(client, image_id, stores):
+def wait_for_image_imported_to_stores(client, image_id, stores=None):
     """Waits for an image to be imported to all requested stores.
 
+    Short circuits to fail if the serer reports failure of any store.
+    If stores is None, just wait for status==active.
+
     The client should also have build_interval and build_timeout attributes.
     """
 
+    exc_cls = lib_exc.TimeoutException
     start = int(time.time())
     while int(time.time()) - start < client.build_timeout:
         image = client.show_image(image_id)
-        if image['status'] == 'active' and image['stores'] == stores:
+        if image['status'] == 'active' and (stores is None or
+                                            image['stores'] == stores):
             return
+        if image.get('os_glance_failed_import'):
+            exc_cls = lib_exc.OtherRestClientException
+            break
 
         time.sleep(client.build_interval)
 
     message = ('Image %s failed to import on stores: %s' %
-               (image_id, str(image['os_glance_failed_import'])))
+               (image_id, str(image.get('os_glance_failed_import'))))
     caller = test_utils.find_test_caller()
     if caller:
         message = '(%s) %s' % (caller, message)
-    raise lib_exc.TimeoutException(message)
+    raise exc_cls(message)
 
 
 def wait_for_image_copied_to_stores(client, image_id):
diff --git a/tempest/config.py b/tempest/config.py
index 7c4539c..1367678 100644
--- a/tempest/config.py
+++ b/tempest/config.py
@@ -706,6 +706,13 @@
     cfg.BoolOpt('import_image',
                 default=False,
                 help="Is image import feature enabled"),
+    # NOTE(danms): Starting mid-Wallaby glance began enforcing the
+    # previously-informal requirement that os_glance_* properties are
+    # reserved for internal use. Thus, we can only run these checks
+    # if we know we are on a new enough glance.
+    cfg.BoolOpt('os_glance_reserved',
+                default=False,
+                help="Should we check that os_glance namespace is reserved"),
 ]
 
 network_group = cfg.OptGroup(name='network',
@@ -845,6 +852,18 @@
                     'This value will be increased in case of conflict.')
 ]
 
+dashboard_group = cfg.OptGroup(name="dashboard",
+                               title="Dashboard options")
+
+DashboardGroup = [
+    cfg.StrOpt('dashboard_url',
+               default='http://localhost/',
+               help="Where the dashboard can be found"),
+    cfg.BoolOpt('disable_ssl_certificate_validation',
+                default=False,
+                help="Set to True if using self-signed SSL certificates."),
+]
+
 validation_group = cfg.OptGroup(name='validation',
                                 title='SSH Validation options')
 
@@ -1190,6 +1209,42 @@
     cfg.BoolOpt('nova',
                 default=True,
                 help="Whether or not nova is expected to be available"),
+    cfg.BoolOpt('horizon',
+                default=True,
+                help="Whether or not horizon is expected to be available"),
+]
+
+enforce_scope_group = cfg.OptGroup(name="enforce_scope",
+                                   title="OpenStack Services with "
+                                         "enforce scope")
+
+
+EnforceScopeGroup = [
+    cfg.BoolOpt('nova',
+                default=False,
+                help='Does the compute service API policies enforce scope? '
+                     'This configuration value should be same as '
+                     'nova.conf: [oslo_policy].enforce_scope option.'),
+    cfg.BoolOpt('neutron',
+                default=False,
+                help='Does the network service API policies enforce scope? '
+                     'This configuration value should be same as '
+                     'neutron.conf: [oslo_policy].enforce_scope option.'),
+    cfg.BoolOpt('glance',
+                default=False,
+                help='Does the Image service API policies enforce scope? '
+                     'This configuration value should be same as '
+                     'glance.conf: [oslo_policy].enforce_scope option.'),
+    cfg.BoolOpt('cinder',
+                default=False,
+                help='Does the Volume service API policies enforce scope? '
+                     'This configuration value should be same as '
+                     'cinder.conf: [oslo_policy].enforce_scope option.'),
+    cfg.BoolOpt('keystone',
+                default=False,
+                help='Does the Identity service API policies enforce scope? '
+                     'This configuration value should be same as '
+                     'keystone.conf: [oslo_policy].enforce_scope option.'),
 ]
 
 debug_group = cfg.OptGroup(name="debug",
@@ -1253,6 +1308,7 @@
     (image_feature_group, ImageFeaturesGroup),
     (network_group, NetworkGroup),
     (network_feature_group, NetworkFeaturesGroup),
+    (dashboard_group, DashboardGroup),
     (validation_group, ValidationGroup),
     (volume_group, VolumeGroup),
     (volume_feature_group, VolumeFeaturesGroup),
@@ -1260,6 +1316,7 @@
     (object_storage_feature_group, ObjectStoreFeaturesGroup),
     (scenario_group, ScenarioGroup),
     (service_available_group, ServiceAvailableGroup),
+    (enforce_scope_group, EnforceScopeGroup),
     (debug_group, DebugGroup),
     (placement_group, PlacementGroup),
     (profiler_group, ProfilerGroup),
@@ -1320,6 +1377,7 @@
         self.image_feature_enabled = _CONF['image-feature-enabled']
         self.network = _CONF.network
         self.network_feature_enabled = _CONF['network-feature-enabled']
+        self.dashboard = _CONF.dashboard
         self.validation = _CONF.validation
         self.volume = _CONF.volume
         self.volume_feature_enabled = _CONF['volume-feature-enabled']
@@ -1328,6 +1386,7 @@
             'object-storage-feature-enabled']
         self.scenario = _CONF.scenario
         self.service_available = _CONF.service_available
+        self.enforce_scope = _CONF.enforce_scope
         self.debug = _CONF.debug
         logging.tempest_set_log_file('tempest.log')
         # Setting attributes for plugins
diff --git a/tempest/lib/common/dynamic_creds.py b/tempest/lib/common/dynamic_creds.py
index 038528f..ecbbe8f 100644
--- a/tempest/lib/common/dynamic_creds.py
+++ b/tempest/lib/common/dynamic_creds.py
@@ -144,9 +144,9 @@
             # need a different token scope for them.
             if self.default_admin_creds.system:
                 scope = 'system'
-            elif (self.default_admin_creds.domain_id or
-                    self.default_admin_creds.domain_name or
-                    self.identity_admin_domain_scope):
+            elif (self.identity_admin_domain_scope and
+                  (self.default_admin_creds.domain_id or
+                   self.default_admin_creds.domain_name)):
                 scope = 'domain'
             else:
                 scope = 'project'
@@ -376,15 +376,18 @@
         elif scope and self._creds.get("%s_%s" % (scope, credential_type[0])):
             credentials = self._creds["%s_%s" % (scope, credential_type[0])]
         else:
-            if credential_type in ['primary', 'alt', 'admin']:
+            if scope:
+                if credential_type == 'admin':
+                    credentials = self._create_creds(
+                        admin=True, scope=scope)
+                else:
+                    credentials = self._create_creds(
+                        roles=credential_type, scope=scope)
+            elif credential_type in ['primary', 'alt', 'admin']:
                 is_admin = (credential_type == 'admin')
                 credentials = self._create_creds(admin=is_admin)
             else:
-                if scope:
-                    credentials = self._create_creds(
-                        roles=credential_type, scope=scope)
-                else:
-                    credentials = self._create_creds(roles=credential_type)
+                credentials = self._create_creds(roles=credential_type)
             if scope:
                 self._creds["%s_%s" %
                             (scope, credential_type[0])] = credentials
diff --git a/tempest/lib/common/preprov_creds.py b/tempest/lib/common/preprov_creds.py
index 641d727..8325f44 100644
--- a/tempest/lib/common/preprov_creds.py
+++ b/tempest/lib/common/preprov_creds.py
@@ -104,15 +104,24 @@
         return hash_dict
 
     @classmethod
+    def _append_scoped_role(cls, scope, role, account_hash, hash_dict):
+        key = "%s_%s" % (scope, role)
+        hash_dict['scoped_roles'].setdefault(key, [])
+        hash_dict['scoped_roles'][key].append(account_hash)
+        return hash_dict
+
+    @classmethod
     def get_hash_dict(cls, accounts, admin_role,
                       object_storage_operator_role=None,
                       object_storage_reseller_admin_role=None):
-        hash_dict = {'roles': {}, 'creds': {}, 'networks': {}}
+        hash_dict = {'roles': {}, 'creds': {}, 'networks': {},
+                     'scoped_roles': {}}
 
         # Loop over the accounts read from the yaml file
         for account in accounts:
             roles = []
             types = []
+            scope = None
             resources = []
             if 'roles' in account:
                 roles = account.pop('roles')
@@ -120,6 +129,12 @@
                 types = account.pop('types')
             if 'resources' in account:
                 resources = account.pop('resources')
+            if 'project_name' in account:
+                scope = 'project'
+            elif 'domain_name' in account:
+                scope = 'domain'
+            elif 'system' in account:
+                scope = 'system'
             temp_hash = hashlib.md5()
             account_for_hash = dict((k, v) for (k, v) in account.items()
                                     if k in cls.HASH_CRED_FIELDS)
@@ -129,6 +144,9 @@
             for role in roles:
                 hash_dict = cls._append_role(role, temp_hash_key,
                                              hash_dict)
+                if scope:
+                    hash_dict = cls._append_scoped_role(
+                        scope, role, temp_hash_key, hash_dict)
             # If types are set for the account append the matching role
             # subdict with the hash
             for type in types:
@@ -201,17 +219,25 @@
                'the credentials for this allocation request' % ','.join(names))
         raise lib_exc.InvalidCredentials(msg)
 
-    def _get_match_hash_list(self, roles=None):
+    def _get_match_hash_list(self, roles=None, scope=None):
         hashes = []
         if roles:
             # Loop over all the creds for each role in the subdict and generate
             # a list of cred lists for each role
             for role in roles:
-                temp_hashes = self.hash_dict['roles'].get(role, None)
-                if not temp_hashes:
-                    raise lib_exc.InvalidCredentials(
-                        "No credentials with role: %s specified in the "
-                        "accounts ""file" % role)
+                if scope:
+                    key = "%s_%s" % (scope, role)
+                    temp_hashes = self.hash_dict['scoped_roles'].get(key)
+                    if not temp_hashes:
+                        raise lib_exc.InvalidCredentials(
+                            "No credentials matching role: %s, scope: %s "
+                            "specified in the accounts file" % (role, scope))
+                else:
+                    temp_hashes = self.hash_dict['roles'].get(role, None)
+                    if not temp_hashes:
+                        raise lib_exc.InvalidCredentials(
+                            "No credentials with role: %s specified in the "
+                            "accounts file" % role)
                 hashes.append(temp_hashes)
             # Take the list of lists and do a boolean and between each list to
             # find the creds which fall under all the specified roles
@@ -239,8 +265,8 @@
         temp_creds.pop('password')
         return temp_creds
 
-    def _get_creds(self, roles=None):
-        useable_hashes = self._get_match_hash_list(roles)
+    def _get_creds(self, roles=None, scope=None):
+        useable_hashes = self._get_match_hash_list(roles, scope)
         if not useable_hashes:
             msg = 'No users configured for type/roles %s' % roles
             raise lib_exc.InvalidCredentials(msg)
@@ -296,6 +322,69 @@
         self._creds['alt'] = net_creds
         return net_creds
 
+    def get_system_admin_creds(self):
+        if self._creds.get('system_admin'):
+            return self._creds.get('system_admin')
+        system_admin = self._get_creds(['admin'], scope='system')
+        self._creds['system_admin'] = system_admin
+        return system_admin
+
+    def get_system_member_creds(self):
+        if self._creds.get('system_member'):
+            return self._creds.get('system_member')
+        system_member = self._get_creds(['member'], scope='system')
+        self._creds['system_member'] = system_member
+        return system_member
+
+    def get_system_reader_creds(self):
+        if self._creds.get('system_reader'):
+            return self._creds.get('system_reader')
+        system_reader = self._get_creds(['reader'], scope='system')
+        self._creds['system_reader'] = system_reader
+        return system_reader
+
+    def get_domain_admin_creds(self):
+        if self._creds.get('domain_admin'):
+            return self._creds.get('domain_admin')
+        domain_admin = self._get_creds(['admin'], scope='domain')
+        self._creds['domain_admin'] = domain_admin
+        return domain_admin
+
+    def get_domain_member_creds(self):
+        if self._creds.get('domain_member'):
+            return self._creds.get('domain_member')
+        domain_member = self._get_creds(['member'], scope='domain')
+        self._creds['domain_member'] = domain_member
+        return domain_member
+
+    def get_domain_reader_creds(self):
+        if self._creds.get('domain_reader'):
+            return self._creds.get('domain_reader')
+        domain_reader = self._get_creds(['reader'], scope='domain')
+        self._creds['domain_reader'] = domain_reader
+        return domain_reader
+
+    def get_project_admin_creds(self):
+        if self._creds.get('project_admin'):
+            return self._creds.get('project_admin')
+        project_admin = self._get_creds(['admin'], scope='project')
+        self._creds['project_admin'] = project_admin
+        return project_admin
+
+    def get_project_member_creds(self):
+        if self._creds.get('project_member'):
+            return self._creds.get('project_member')
+        project_member = self._get_creds(['member'], scope='project')
+        self._creds['project_member'] = project_member
+        return project_member
+
+    def get_project_reader_creds(self):
+        if self._creds.get('project_reader'):
+            return self._creds.get('project_reader')
+        project_reader = self._get_creds(['reader'], scope='project')
+        self._creds['project_reader'] = project_reader
+        return project_reader
+
     def get_creds_by_roles(self, roles, force_new=False):
         roles = list(set(roles))
         exist_creds = self._creds.get(six.text_type(roles).encode(
diff --git a/tempest/lib/common/rest_client.py b/tempest/lib/common/rest_client.py
index b47b511..a987e03 100644
--- a/tempest/lib/common/rest_client.py
+++ b/tempest/lib/common/rest_client.py
@@ -104,16 +104,18 @@
                                        'location', 'proxy-authenticate',
                                        'retry-after', 'server',
                                        'vary', 'www-authenticate'))
-        dscv = disable_ssl_certificate_validation
+        self.dscv = disable_ssl_certificate_validation
 
         if proxy_url:
             self.http_obj = http.ClosingProxyHttp(
                 proxy_url,
-                disable_ssl_certificate_validation=dscv, ca_certs=ca_certs,
+                disable_ssl_certificate_validation=self.dscv,
+                ca_certs=ca_certs,
                 timeout=http_timeout, follow_redirects=follow_redirects)
         else:
             self.http_obj = http.ClosingHttp(
-                disable_ssl_certificate_validation=dscv, ca_certs=ca_certs,
+                disable_ssl_certificate_validation=self.dscv,
+                ca_certs=ca_certs,
                 timeout=http_timeout, follow_redirects=follow_redirects)
 
     def get_headers(self, accept_type=None, send_type=None):
diff --git a/tempest/lib/common/utils/data_utils.py b/tempest/lib/common/utils/data_utils.py
index 44b55eb..b6671b5 100644
--- a/tempest/lib/common/utils/data_utils.py
+++ b/tempest/lib/common/utils/data_utils.py
@@ -169,6 +169,8 @@
     :return: size randomly bytes
     :rtype: string
     """
+    if size > 1 << 20:
+        raise RuntimeError('Size should be less than 1MiB')
     return b''.join([six.int2byte(random.randint(0, 255))
                      for i in range(size)])
 
diff --git a/tempest/lib/decorators.py b/tempest/lib/decorators.py
index ebe2d61..25ff473 100644
--- a/tempest/lib/decorators.py
+++ b/tempest/lib/decorators.py
@@ -72,19 +72,13 @@
     def decorator(f):
         @functools.wraps(f)
         def wrapper(*func_args, **func_kwargs):
-            skip = False
-            msg = ''
-            if "condition" in kwargs:
-                if kwargs["condition"] is True:
-                    skip = True
-            else:
-                skip = True
-            if "bug" in kwargs and skip is True:
-                bug = kwargs['bug']
+            condition = kwargs.get('condition', True)
+            bug = kwargs.get('bug', None)
+            if bug and condition:
                 bug_type = kwargs.get('bug_type', 'launchpad')
                 bug_url = _get_bug_url(bug, bug_type)
-                msg = "Skipped until bug: %s is resolved." % bug_url
-                raise testtools.TestCase.skipException(msg)
+                raise testtools.TestCase.skipException(
+                    "Skipped until bug: %s is resolved." % bug_url)
             return f(*func_args, **func_kwargs)
         return wrapper
     return decorator
diff --git a/tempest/lib/services/identity/v3/identity_providers_client.py b/tempest/lib/services/identity/v3/identity_providers_client.py
new file mode 100644
index 0000000..af6a245
--- /dev/null
+++ b/tempest/lib/services/identity/v3/identity_providers_client.py
@@ -0,0 +1,92 @@
+# Copyright 2020 Samsung Electronics Co., Ltd
+# All Rights Reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License"); you may not
+# use this file except in compliance with the License. You may obtain a copy of
+# the License at
+#
+#    http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+# License for the specific language governing permissions and limitations under
+# the License.
+
+from oslo_serialization import jsonutils as json
+from six.moves.urllib import parse as urllib
+
+from tempest.lib.common import rest_client
+
+
+class IdentityProvidersClient(rest_client.RestClient):
+
+    def register_identity_provider(self, identity_provider_id, **kwargs):
+        """Register an identity provider.
+
+        For a full list of available parameters, please refer to the official
+        API reference:
+        https://docs.openstack.org/api-ref/identity/v3-ext/index.html#register-an-identity-provider
+        """
+        post_body = json.dumps({'identity_provider': kwargs})
+        resp, body = self.put(
+            'OS-FEDERATION/identity_providers/%s' % identity_provider_id,
+            post_body)
+        self.expected_success(201, resp.status)
+        body = json.loads(body)
+        return rest_client.ResponseBody(resp, body)
+
+    def list_identity_providers(self, **params):
+        """List identity providers.
+
+        For a full list of available parameters, please refer to the official
+        API reference:
+        https://docs.openstack.org/api-ref/identity/v3-ext/index.html#list-identity-providers
+        """
+        url = 'identity_providers'
+        if params:
+            url += '?%s' % urllib.urlencode(params)
+        resp, body = self.get(url)
+        self.expected_success(200, resp.status)
+        body = json.loads(body)
+        return rest_client.ResponseBody(resp, body)
+
+    def get_identity_provider(self, identity_provider_id):
+        """Get identity provider.
+
+        For a full list of available parameters, please refer to the official
+        API reference:
+        https://docs.openstack.org/api-ref/identity/v3-ext/index.html#get-identity-provider
+        """
+        resp, body = self.get(
+            'OS-FEDERATION/identity_providers/%s' % identity_provider_id)
+        self.expected_success(200, resp.status)
+        body = json.loads(body)
+        return rest_client.ResponseBody(resp, body)
+
+    def delete_identity_provider(self, identity_provider_id):
+        """Delete identity provider.
+
+        For a full list of available parameters, please refer to the official
+        API reference:
+        https://docs.openstack.org/api-ref/identity/v3-ext/index.html#delete-identity-provider
+        """
+        resp, body = self.delete(
+            'OS-FEDERATION/identity_providers/%s' % identity_provider_id)
+        self.expected_success(204, resp.status)
+        return rest_client.ResponseBody(resp, body)
+
+    def update_identity_provider(self, identity_provider_id, **kwargs):
+        """Update identity provider.
+
+        For a full list of available parameters, please refer to the official
+        API reference:
+        https://docs.openstack.org/api-ref/identity/v3-ext/index.html#update-identity-provider
+        """
+        post_body = json.dumps({'identity_provider': kwargs})
+        resp, body = self.patch(
+            'OS-FEDERATION/identity_providers/%s' % identity_provider_id,
+            post_body)
+        self.expected_success(200, resp.status)
+        body = json.loads(body)
+        return rest_client.ResponseBody(resp, body)
diff --git a/tempest/lib/services/identity/v3/mappings_client.py b/tempest/lib/services/identity/v3/mappings_client.py
new file mode 100644
index 0000000..9ec5384
--- /dev/null
+++ b/tempest/lib/services/identity/v3/mappings_client.py
@@ -0,0 +1,90 @@
+# Copyright 2020 Samsung Electronics Co., Ltd
+# All Rights Reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License"); you may not
+# use this file except in compliance with the License. You may obtain a copy of
+# the License at
+#
+#    http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+# License for the specific language governing permissions and limitations under
+# the License.
+
+from oslo_serialization import jsonutils as json
+from six.moves.urllib import parse as urllib
+
+from tempest.lib.common import rest_client
+
+
+class MappingsClient(rest_client.RestClient):
+
+    def create_mapping(self, mapping_id, **kwargs):
+        """Create a mapping.
+
+        For a full list of available parameters, please refer to the official
+        API reference:
+        https://docs.openstack.org/api-ref/identity/v3-ext/index.html#create-a-mapping
+        """
+        post_body = json.dumps({'mapping': kwargs})
+        resp, body = self.put(
+            'OS-FEDERATION/mappings/%s' % mapping_id, post_body)
+        self.expected_success(201, resp.status)
+        body = json.loads(body)
+        return rest_client.ResponseBody(resp, body)
+
+    def get_mapping(self, mapping_id):
+        """Get a mapping.
+
+        For a full list of available parameters, please refer to the official
+        API reference:
+        https://docs.openstack.org/api-ref/identity/v3-ext/index.html#get-a-mapping
+        """
+        resp, body = self.get(
+            'OS-FEDERATION/mappings/%s' % mapping_id)
+        self.expected_success(200, resp.status)
+        body = json.loads(body)
+        return rest_client.ResponseBody(resp, body)
+
+    def update_mapping(self, mapping_id, **kwargs):
+        """Update a mapping.
+
+        For a full list of available parameters, please refer to the official
+        API reference:
+        https://docs.openstack.org/api-ref/identity/v3-ext/index.html#update-a-mapping
+        """
+        post_body = json.dumps({'mapping': kwargs})
+        resp, body = self.patch(
+            'OS-FEDERATION/mappings/%s' % mapping_id, post_body)
+        self.expected_success(200, resp.status)
+        body = json.loads(body)
+        return rest_client.ResponseBody(resp, body)
+
+    def list_mappings(self, **kwargs):
+        """List mappings.
+
+        For a full list of available parameters, please refer to the official
+        API reference:
+        https://docs.openstack.org/api-ref/identity/v3-ext/index.html#list-mappings
+        """
+        url = 'OS-FEDERATION/mappings'
+        if kwargs:
+            url += '?%s' % urllib.urlencode(kwargs)
+        resp, body = self.get(url)
+        self.expected_success(200, resp.status)
+        body = json.loads(body)
+        return rest_client.ResponseBody(resp, body)
+
+    def delete_mapping(self, mapping_id):
+        """Delete a mapping.
+
+        For a full list of available parameters, please refer to the official
+        API reference:
+        https://docs.openstack.org/api-ref/identity/v3-ext/index.html#delete-a-mapping
+        """
+        resp, body = self.delete(
+            'OS-FEDERATION/mappings/%s' % mapping_id)
+        self.expected_success(204, resp.status)
+        return rest_client.ResponseBody(resp, body)
diff --git a/tempest/lib/services/identity/v3/protocols_client.py b/tempest/lib/services/identity/v3/protocols_client.py
new file mode 100644
index 0000000..2e0221b
--- /dev/null
+++ b/tempest/lib/services/identity/v3/protocols_client.py
@@ -0,0 +1,96 @@
+# Copyright 2020 Samsung Electronics Co., Ltd
+# All Rights Reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License"); you may not
+# use this file except in compliance with the License. You may obtain a copy of
+# the License at
+#
+#    http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+# License for the specific language governing permissions and limitations under
+# the License.
+
+from oslo_serialization import jsonutils as json
+from six.moves.urllib import parse as urllib
+
+from tempest.lib.common import rest_client
+
+
+class ProtocolsClient(rest_client.RestClient):
+
+    def add_protocol_to_identity_provider(self, idp_id, protocol_id,
+                                          **kwargs):
+        """Add protocol to identity provider.
+
+        For a full list of available parameters, please refer to the official
+        API reference:
+        https://docs.openstack.org/api-ref/identity/v3-ext/index.html#add-protocol-to-identity-provider
+        """
+        post_body = json.dumps({'protocol': kwargs})
+        resp, body = self.put(
+            'OS-FEDERATION/identity_providers/%s/protocols/%s'
+            % (idp_id, protocol_id), post_body)
+        self.expected_success(201, resp.status)
+        body = json.loads(body)
+        return rest_client.ResponseBody(resp, body)
+
+    def list_protocols_of_identity_provider(self, idp_id, **kwargs):
+        """List protocols of identity provider.
+
+        For a full list of available parameters, please refer to the official
+        API reference:
+        https://docs.openstack.org/api-ref/identity/v3-ext/index.html#list-protocols-of-identity-provider
+        """
+        url = 'OS-FEDERATION/identity_providers/%s/protocols' % idp_id
+        if kwargs:
+            url += '?%s' % urllib.urlencode(kwargs)
+        resp, body = self.get(url)
+        self.expected_success(200, resp.status)
+        body = json.loads(body)
+        return rest_client.ResponseBody(resp, body)
+
+    def get_protocol_for_identity_provider(self, idp_id, protocol_id):
+        """Get protocol for identity provider.
+
+        For a full list of available parameters, please refer to the official
+        API reference:
+        https://docs.openstack.org/api-ref/identity/v3-ext/index.html#get-protocol-for-identity-provider
+        """
+        resp, body = self.get(
+            'OS-FEDERATION/identity_providers/%s/protocols/%s'
+            % (idp_id, protocol_id))
+        self.expected_success(200, resp.status)
+        body = json.loads(body)
+        return rest_client.ResponseBody(resp, body)
+
+    def update_mapping_for_identity_provider(self, idp_id, protocol_id,
+                                             **kwargs):
+        """Update attribute mapping for identity provider.
+
+        For a full list of available parameters, please refer to the official
+        API reference:
+        https://docs.openstack.org/api-ref/identity/v3-ext/index.html#update-attribute-mapping-for-identity-provider
+        """
+        post_body = json.dumps({'protocol': kwargs})
+        resp, body = self.patch(
+            'OS-FEDERATION/identity_providers/%s/protocols/%s'
+            % (idp_id, protocol_id), post_body)
+        self.expected_success(200, resp.status)
+        body = json.loads(body)
+        return rest_client.ResponseBody(resp, body)
+
+    def delete_protocol_from_identity_provider(self, idp_id, protocol_id):
+        """Delete a protocol from identity provider.
+
+        For a full list of available parameters, please refer to the official
+        API reference:
+        https://docs.openstack.org/api-ref/identity/v3-ext/index.html#delete-a-protocol-from-identity-provider
+        """
+        resp, body = self.delete(
+            'OS-FEDERATION/identity_providers/%s/protocols/%s'
+            % (idp_id, protocol_id))
+        self.expected_success(204, resp.status)
+        return rest_client.ResponseBody(resp, body)
diff --git a/tempest/lib/services/identity/v3/service_providers_client.py b/tempest/lib/services/identity/v3/service_providers_client.py
new file mode 100644
index 0000000..b84cf43
--- /dev/null
+++ b/tempest/lib/services/identity/v3/service_providers_client.py
@@ -0,0 +1,92 @@
+# Copyright 2020 Samsung Electronics Co., Ltd
+# All Rights Reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License"); you may not
+# use this file except in compliance with the License. You may obtain a copy of
+# the License at
+#
+#    http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+# License for the specific language governing permissions and limitations under
+# the License.
+
+from oslo_serialization import jsonutils as json
+from six.moves.urllib import parse as urllib
+
+from tempest.lib.common import rest_client
+
+
+class ServiceProvidersClient(rest_client.RestClient):
+
+    def register_service_provider(self, service_provider_id, **kwargs):
+        """Register a service provider.
+
+        For a full list of available parameters, please refer to the official
+        API reference:
+        https://docs.openstack.org/api-ref/identity/v3-ext/index.html#register-a-service-provider
+        """
+        post_body = json.dumps({'service_provider': kwargs})
+        resp, body = self.put(
+            'OS-FEDERATION/service_providers/%s' % service_provider_id,
+            post_body)
+        self.expected_success(201, resp.status)
+        body = json.loads(body)
+        return rest_client.ResponseBody(resp, body)
+
+    def list_service_providers(self, **kwargs):
+        """List service providers.
+
+        For a full list of available parameters, please refer to the official
+        API reference:
+        https://docs.openstack.org/api-ref/identity/v3-ext/index.html#list-service-providers
+        """
+        url = 'OS-FEDERATION/service_providers'
+        if kwargs:
+            url += '?%s' % urllib.urlencode(kwargs)
+        resp, body = self.get(url)
+        self.expected_success(200, resp.status)
+        body = json.loads(body)
+        return rest_client.ResponseBody(resp, body)
+
+    def get_service_provider(self, service_provider_id):
+        """Get a service provider.
+
+        For a full list of available parameters, please refer to the official
+        API reference:
+        https://docs.openstack.org/api-ref/identity/v3-ext/index.html#get-service-provider
+        """
+        resp, body = self.get(
+            'OS-FEDERATION/service_providers/%s' % service_provider_id)
+        self.expected_success(200, resp.status)
+        body = json.loads(body)
+        return rest_client.ResponseBody(resp, body)
+
+    def delete_service_provider(self, service_provider_id):
+        """Delete a service provider.
+
+        For a full list of available parameters, please refer to the official
+        API reference:
+        https://docs.openstack.org/api-ref/identity/v3-ext/index.html#delete-service-provider
+        """
+        resp, body = self.delete(
+            'OS-FEDERATION/service_providers/%s' % service_provider_id)
+        self.expected_success(204, resp.status)
+        return rest_client.ResponseBody(resp, body)
+
+    def update_service_provider(self, service_provider_id, **kwargs):
+        """Update a service provider.
+
+        For a full list of available parameters, please refer to the official
+        API reference:
+        https://docs.openstack.org/api-ref/identity/v3-ext/index.html#update-service-provider
+        """
+        post_body = json.dumps({'service_provider': kwargs})
+        resp, body = self.patch(
+            'OS-FEDERATION/service_providers/%s' % service_provider_id,
+            post_body)
+        self.expected_success(200, resp.status)
+        body = json.loads(body)
+        return rest_client.ResponseBody(resp, body)
diff --git a/tempest/lib/services/object_storage/object_client.py b/tempest/lib/services/object_storage/object_client.py
index 383aff6..1d38153 100644
--- a/tempest/lib/services/object_storage/object_client.py
+++ b/tempest/lib/services/object_storage/object_client.py
@@ -12,6 +12,7 @@
 #    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
 #    License for the specific language governing permissions and limitations
 #    under the License.
+import ssl
 
 from six.moves import http_client as httplib
 from six.moves.urllib import parse as urlparse
@@ -118,7 +119,7 @@
         path = str(parsed.path) + "/"
         path += "%s/%s" % (str(container), str(object_name))
 
-        conn = _create_connection(parsed)
+        conn = self._create_connection(parsed)
         # Send the PUT request and the headers including the "Expect" header
         conn.putrequest('PUT', path)
 
@@ -151,15 +152,20 @@
 
         return resp.status, resp.reason
 
+    def _create_connection(self, parsed_url):
+        """Helper function to create connection with httplib
 
-def _create_connection(parsed_url):
-    """Helper function to create connection with httplib
+        :param parsed_url: parsed url of the remote location
+        """
+        context = None
+        # If CONF.identity.disable_ssl_certificate_validation is true,
+        # do not check ssl certification.
+        if self.dscv:
+            context = ssl._create_unverified_context()
+        if parsed_url.scheme == 'https':
+            conn = httplib.HTTPSConnection(parsed_url.netloc,
+                                           context=context)
+        else:
+            conn = httplib.HTTPConnection(parsed_url.netloc)
 
-    :param parsed_url: parsed url of the remote location
-    """
-    if parsed_url.scheme == 'https':
-        conn = httplib.HTTPSConnection(parsed_url.netloc)
-    else:
-        conn = httplib.HTTPConnection(parsed_url.netloc)
-
-    return conn
+        return conn
diff --git a/tempest/manager.py b/tempest/manager.py
deleted file mode 100644
index b485ef2..0000000
--- a/tempest/manager.py
+++ /dev/null
@@ -1,62 +0,0 @@
-# Copyright 2012 OpenStack Foundation
-# All Rights Reserved.
-#
-#    Licensed under the Apache License, Version 2.0 (the "License"); you may
-#    not use this file except in compliance with the License. You may obtain
-#    a copy of the License at
-#
-#         http://www.apache.org/licenses/LICENSE-2.0
-#
-#    Unless required by applicable law or agreed to in writing, software
-#    distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
-#    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
-#    License for the specific language governing permissions and limitations
-#    under the License.
-
-from oslo_log import log as logging
-
-from tempest import clients as tempest_clients
-from tempest import config
-from tempest.lib.services import clients
-
-CONF = config.CONF
-LOG = logging.getLogger(__name__)
-
-
-class Manager(clients.ServiceClients):
-    """Service client manager class for backward compatibility
-
-    The former manager.Manager is not a stable interface in Tempest,
-    nonetheless it is consumed by a number of plugins already. This class
-    exists to provide some grace time for the move to tempest.lib.
-    """
-
-    def __init__(self, credentials, scope='project'):
-        msg = ("tempest.manager.Manager is not a stable interface and as such "
-               "it should not be imported directly. It will be removed as "
-               "soon as the client manager becomes available in tempest.lib.")
-        LOG.warning(msg)
-        dscv = CONF.identity.disable_ssl_certificate_validation
-        _, uri = tempest_clients.get_auth_provider_class(credentials)
-        super(Manager, self).__init__(
-            credentials=credentials, scope=scope,
-            identity_uri=uri,
-            disable_ssl_certificate_validation=dscv,
-            ca_certs=CONF.identity.ca_certificates_file,
-            trace_requests=CONF.debug.trace_requests)
-
-
-def get_auth_provider(credentials, pre_auth=False, scope='project'):
-    """Shim to get_auth_provider in clients.py
-
-    get_auth_provider used to be hosted in this module, but it has been
-    moved to clients.py now as a more permanent location.
-    This module will be removed eventually, and this shim is only
-    maintained for the benefit of plugins already consuming this interface.
-    """
-    msg = ("tempest.manager.get_auth_provider is not a stable interface and "
-           "as such it should not imported directly. It will be removed as "
-           "the client manager becomes available in tempest.lib.")
-    LOG.warning(msg)
-    return tempest_clients.get_auth_provider(credentials=credentials,
-                                             pre_auth=pre_auth, scope=scope)
diff --git a/tempest/scenario/manager.py b/tempest/scenario/manager.py
index ce13166..4652af4 100644
--- a/tempest/scenario/manager.py
+++ b/tempest/scenario/manager.py
@@ -143,10 +143,20 @@
     # resp part which is not used in scenario tests
 
     def create_port(self, network_id, client=None, **kwargs):
-        """Creates port for the respective network_id"""
+        """Creates port for the respective network_id
+
+        :param network_id: the id of the network
+        :param client: the client to use, defaults to self.ports_client
+        :param kwargs: additional arguments such as:
+            - namestart - a string to generate a name for the port from
+                        - default is self.__class__.__name__
+            - 'binding:vnic_type' - defaults to CONF.network.port_vnic_type
+            - 'binding:profile' - defaults to CONF.network.port_profile
+        """
         if not client:
             client = self.ports_client
-        name = kwargs.pop('namestart', self.__class__.__name__)
+        name = data_utils.rand_name(
+            kwargs.pop('namestart', self.__class__.__name__))
         if CONF.network.port_vnic_type and 'binding:vnic_type' not in kwargs:
             kwargs['binding:vnic_type'] = CONF.network.port_vnic_type
         if CONF.network.port_profile and 'binding:profile' not in kwargs:
@@ -216,6 +226,9 @@
               the port.
               example: port_profile = "capabilities:[switchdev]"
               Defaults to ``CONF.network.port_profile``.
+            * *create_port_body* (``dict``) --
+              This attribute is a dictionary of additional arguments to be
+              passed to create_port method.
         """
 
         # NOTE(jlanoux): As a first step, ssh checks in the scenario
@@ -241,7 +254,7 @@
         # every network
         if vnic_type or profile:
             ports = []
-            create_port_body = {}
+            create_port_body = kwargs.pop('create_port_body', {})
 
             if vnic_type:
                 create_port_body['binding:vnic_type'] = vnic_type
@@ -362,21 +375,35 @@
 
     def create_backup(self, volume_id, name=None, description=None,
                       force=False, snapshot_id=None, incremental=False,
-                      container=None):
-        """Creates backup
+                      container=None, **kwargs):
+        """Creates a backup of the given volume_id or snapshot_id
 
-        This wrapper utility creates backup and waits for backup to be
-        in 'available' state.
+        This wrapper utility creates a backup and waits until it is in
+       'available' state.
+
+        :param volume_id: UUID of the volume to back up
+        :param name: backup name, '$classname-backup' by default
+        :param description: Description of the backup, None by default
+        :param force: boolean whether to backup even if the volume is attached
+            False by default
+        :param snapshot_id: UUID of the source snapshot to back up
+            None by default
+        :param incremental: boolean, False by default
+        :param container: a container name, None by default
+        :param **kwargs: additional parameters per the documentation:
+            https://docs.openstack.org/api-ref/block-storage/v3/
+            #create-a-backup
         """
 
         name = name or data_utils.rand_name(
             self.__class__.__name__ + "-backup")
-        kwargs = {'name': name,
-                  'description': description,
-                  'force': force,
-                  'snapshot_id': snapshot_id,
-                  'incremental': incremental,
-                  'container': container}
+        args = {'name': name,
+                'description': description,
+                'force': force,
+                'snapshot_id': snapshot_id,
+                'incremental': incremental,
+                'container': container}
+        args.update(kwargs)
         backup = self.backups_client.create_backup(volume_id=volume_id,
                                                    **kwargs)['backup']
         self.addCleanup(self.backups_client.delete_backup, backup['id'])
@@ -384,14 +411,20 @@
                                                 backup['id'], 'available')
         return backup
 
-    def restore_backup(self, backup_id):
-        """Restore backup
+    def restore_backup(self, backup_id, **kwargs):
+        """Restores a backup given by the backup_id
 
-        This wrapper utility restores backup and waits for backup to be
-        in 'available' state.
+        This wrapper utility restores a backup and waits until it is in
+        'available' state.
+
+        :param backup_id: UUID of a backup to restore
+        :param **kwargs: additional parameters per the documentation:
+            https://docs.openstack.org/api-ref/block-storage/v3/
+            #restore-a-backup
         """
 
-        restore = self.backups_client.restore_backup(backup_id)['restore']
+        body = self.backups_client.restore_backup(backup_id, **kwargs)
+        restore = body['restore']
         self.addCleanup(self.volumes_client.delete_volume,
                         restore['volume_id'])
         waiters.wait_for_volume_resource_status(self.backups_client,
@@ -402,29 +435,36 @@
         self.assertEqual(backup_id, restore['backup_id'])
         return restore
 
-    def rebuild_server(self, server_id, image=None,
-                       preserve_ephemeral=False, wait=True,
-                       rebuild_kwargs=None):
+    def rebuild_server(self, server_id, image=None, preserve_ephemeral=False,
+                       wait=True, **kwargs):
         if image is None:
             image = CONF.compute.image_ref
-        rebuild_kwargs = rebuild_kwargs or {}
         LOG.debug("Rebuilding server (id: %s, image: %s, preserve eph: %s)",
                   server_id, image, preserve_ephemeral)
         self.servers_client.rebuild_server(
             server_id=server_id,
             image_ref=image,
             preserve_ephemeral=preserve_ephemeral,
-            **rebuild_kwargs)
+            **kwargs)
         if wait:
             waiters.wait_for_server_status(self.servers_client,
                                            server_id, 'ACTIVE')
 
     def create_volume_snapshot(self, volume_id, name=None, description=None,
-                               metadata=None, force=False):
-        """Creates volume
+                               metadata=None, force=False, **kwargs):
+        """Creates volume's snapshot
 
-        This wrapper utility creates volume snapshot and waits for backup
-        to be in 'available' state.
+        This wrapper utility creates volume snapshot and waits for it until
+        it is in 'available' state.
+
+        :param volume_id: UUID of a volume to create snapshot of
+        :param name: name of the snapshot, '$classname-snapshot' by default
+        :param description: description of the snapshot
+        :param metadata: metadata key and value pairs for the snapshot
+        :param force: whether snapshot even when the volume is attached
+        :param **kwargs: additional parameters per the doc
+            https://docs.openstack.org/api-ref/block-storage/v3/
+            #create-a-snapshot
         """
 
         name = name or data_utils.rand_name(
@@ -434,7 +474,8 @@
             force=force,
             name=name,
             description=description,
-            metadata=metadata)['snapshot']
+            metadata=metadata,
+            **kwargs)['snapshot']
 
         self.addCleanup(self.snapshots_client.wait_for_resource_deletion,
                         snapshot['id'])
@@ -504,7 +545,7 @@
         self.addCleanup(self._cleanup_volume_type, volume_type)
         return volume_type
 
-    def _create_loginable_secgroup_rule(self, secgroup_id=None, rulesets=None):
+    def create_loginable_secgroup_rule(self, secgroup_id=None, rulesets=None):
         """Create loginable security group rule by compute clients.
 
         This function will create by default the following rules:
@@ -564,7 +605,7 @@
             secgroup['id'])
 
         # Add rules to the security group
-        self._create_loginable_secgroup_rule(secgroup['id'])
+        self.create_loginable_secgroup_rule(secgroup['id'])
         return secgroup
 
     def get_remote_client(self, ip_address, username=None, private_key=None,
@@ -649,7 +690,7 @@
         LOG.debug("image:%s", image['id'])
         return image['id']
 
-    def _log_console_output(self, servers=None, client=None, **kwargs):
+    def log_console_output(self, servers=None, client=None, **kwargs):
         """Console log output"""
         if not CONF.compute_feature_enabled.console_output:
             LOG.debug('Console output not supported, cannot log')
@@ -785,7 +826,7 @@
                       'result': 'expected' if result else 'unexpected'
                   })
         if server:
-            self._log_console_output([server])
+            self.log_console_output([server])
         return result
 
     def check_vm_connectivity(self, ip_address,
@@ -1274,7 +1315,7 @@
                                                should_connect=should_connect)
         except Exception as e:
             LOG.exception('Tenant network connectivity check failed')
-            self._log_console_output(servers_for_debug)
+            self.log_console_output(servers_for_debug)
             self._log_net_info(e)
             raise
 
@@ -1317,7 +1358,7 @@
                 % (dest, source_host)
         else:
             msg = "%s is reachable from %s" % (dest, source_host)
-        self._log_console_output()
+        self.log_console_output()
         self.fail(msg)
 
     def _create_security_group(self, security_group_rules_client=None,
@@ -1335,7 +1376,7 @@
             project_id=project_id)
 
         # Add rules to the security group
-        rules = self._create_loginable_secgroup_rule(
+        rules = self.create_loginable_secgroup_rule(
             security_group_rules_client=security_group_rules_client,
             secgroup=secgroup,
             security_groups_client=security_groups_client)
@@ -1376,10 +1417,10 @@
                         client.delete_security_group, secgroup['id'])
         return secgroup
 
-    def _create_security_group_rule(self, secgroup=None,
-                                    sec_group_rules_client=None,
-                                    project_id=None,
-                                    security_groups_client=None, **kwargs):
+    def create_security_group_rule(self, secgroup=None,
+                                   sec_group_rules_client=None,
+                                   project_id=None,
+                                   security_groups_client=None, **kwargs):
         """Create a rule from a dictionary of rule parameters.
 
         Create a rule in a secgroup. if secgroup not defined will search for
@@ -1424,9 +1465,9 @@
 
         return sg_rule
 
-    def _create_loginable_secgroup_rule(self, security_group_rules_client=None,
-                                        secgroup=None,
-                                        security_groups_client=None):
+    def create_loginable_secgroup_rule(self, security_group_rules_client=None,
+                                       secgroup=None,
+                                       security_groups_client=None):
         """Create loginable security group rule by neutron clients by default.
 
         This function will create:
@@ -1463,7 +1504,7 @@
             for r_direction in ['ingress', 'egress']:
                 ruleset['direction'] = r_direction
                 try:
-                    sg_rule = self._create_security_group_rule(
+                    sg_rule = self.create_security_group_rule(
                         sec_group_rules_client=sec_group_rules_client,
                         secgroup=secgroup,
                         security_groups_client=security_groups_client,
@@ -1479,7 +1520,7 @@
 
         return rules
 
-    def _get_router(self, client=None, project_id=None):
+    def _get_router(self, client=None, project_id=None, **kwargs):
         """Retrieve a router for the given tenant id.
 
         If a public router has been configured, it will be returned.
@@ -1499,11 +1540,20 @@
             body = client.show_router(router_id)
             return body['router']
         elif network_id:
+            name = kwargs.pop('name', None)
+            if not name:
+                namestart = self.__class__.__name__ + '-router'
+                name = data_utils.rand_name(namestart)
+
+            ext_gw_info = kwargs.pop('external_gateway_info', None)
+            if not ext_gw_info:
+                ext_gw_info = dict(network_id=network_id)
             router = client.create_router(
-                name=data_utils.rand_name(self.__class__.__name__ + '-router'),
-                admin_state_up=True,
+                name=name,
+                admin_state_up=kwargs.get('admin_state_up', True),
                 project_id=project_id,
-                external_gateway_info=dict(network_id=network_id))['router']
+                external_gateway_info=ext_gw_info,
+                **kwargs)['router']
             self.addCleanup(test_utils.call_and_ignore_notfound_exc,
                             client.delete_router, router['id'])
             return router
diff --git a/tempest/scenario/test_dashboard_basic_ops.py b/tempest/scenario/test_dashboard_basic_ops.py
new file mode 100644
index 0000000..b1098fa
--- /dev/null
+++ b/tempest/scenario/test_dashboard_basic_ops.py
@@ -0,0 +1,141 @@
+#    Licensed under the Apache License, Version 2.0 (the "License"); you may
+#    not use this file except in compliance with the License. You may obtain
+#    a copy of the License at
+#
+#         http://www.apache.org/licenses/LICENSE-2.0
+#
+#    Unless required by applicable law or agreed to in writing, software
+#    distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+#    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+#    License for the specific language governing permissions and limitations
+#    under the License.
+
+import html.parser
+import ssl
+from urllib import parse
+from urllib import request
+
+from tempest.common import utils
+from tempest import config
+from tempest.lib import decorators
+from tempest import test
+
+CONF = config.CONF
+
+
+class HorizonHTMLParser(html.parser.HTMLParser):
+    csrf_token = None
+    region = None
+    login = None
+
+    def _find_name(self, attrs, name):
+        for attrpair in attrs:
+            if attrpair[0] == 'name' and attrpair[1] == name:
+                return True
+        return False
+
+    def _find_value(self, attrs):
+        for attrpair in attrs:
+            if attrpair[0] == 'value':
+                return attrpair[1]
+        return None
+
+    def _find_attr_value(self, attrs, attr_name):
+        for attrpair in attrs:
+            if attrpair[0] == attr_name:
+                return attrpair[1]
+        return None
+
+    def handle_starttag(self, tag, attrs):
+        if tag == 'input':
+            if self._find_name(attrs, 'csrfmiddlewaretoken'):
+                self.csrf_token = self._find_value(attrs)
+            if self._find_name(attrs, 'region'):
+                self.region = self._find_value(attrs)
+        if tag == 'form':
+            self.login = self._find_attr_value(attrs, 'action')
+
+
+class TestDashboardBasicOps(test.BaseTestCase):
+
+    """The test suite for dashboard basic operations
+
+    This is a basic scenario test:
+    * checks that the login page is available
+    * logs in as a regular user
+    * checks that the user home page loads without error
+    """
+    opener = None
+
+    credentials = ['primary']
+
+    @classmethod
+    def skip_checks(cls):
+        super(TestDashboardBasicOps, cls).skip_checks()
+        if not CONF.service_available.horizon:
+            raise cls.skipException("Horizon support is required")
+
+    @classmethod
+    def setup_credentials(cls):
+        cls.set_network_resources()
+        super(TestDashboardBasicOps, cls).setup_credentials()
+
+    def check_login_page(self):
+        response = self._get_opener().open(CONF.dashboard.dashboard_url).read()
+        self.assertIn("id_username", response.decode("utf-8"))
+
+    def user_login(self, username, password):
+        response = self._get_opener().open(CONF.dashboard.dashboard_url).read()
+
+        # Grab the CSRF token and default region
+        parser = HorizonHTMLParser()
+        parser.feed(response.decode("utf-8"))
+
+        # construct login url for dashboard, discovery accommodates non-/ web
+        # root for dashboard
+        login_url = parse.urljoin(CONF.dashboard.dashboard_url, parser.login)
+
+        # Prepare login form request
+        req = request.Request(login_url)
+        req.add_header('Content-type', 'application/x-www-form-urlencoded')
+        req.add_header('Referer', CONF.dashboard.dashboard_url)
+
+        # Pass the default domain name regardless of the auth version in order
+        # to test the scenario of when horizon is running with keystone v3
+        params = {'username': username,
+                  'password': password,
+                  'region': parser.region,
+                  'domain': CONF.auth.default_credentials_domain_name,
+                  'csrfmiddlewaretoken': parser.csrf_token}
+        self._get_opener().open(req, parse.urlencode(params).encode())
+
+    def check_home_page(self):
+        response = self._get_opener().open(CONF.dashboard.dashboard_url).read()
+        self.assertIn('Overview', response.decode("utf-8"))
+
+    def _get_opener(self):
+        if not self.opener:
+            if (CONF.dashboard.disable_ssl_certificate_validation and
+                    self._ssl_default_context_supported()):
+                ctx = ssl.create_default_context()
+                ctx.check_hostname = False
+                ctx.verify_mode = ssl.CERT_NONE
+                self.opener = request.build_opener(
+                    request.HTTPSHandler(context=ctx),
+                    request.HTTPCookieProcessor())
+            else:
+                self.opener = request.build_opener(
+                    request.HTTPCookieProcessor())
+        return self.opener
+
+    def _ssl_default_context_supported(self):
+        return (hasattr(ssl, 'create_default_context'))
+
+    @decorators.attr(type='smoke')
+    @decorators.idempotent_id('4f8851b1-0e69-482b-b63b-84c6e76f6c80')
+    @utils.services('dashboard')
+    def test_basic_scenario(self):
+        creds = self.os_primary.credentials
+        self.check_login_page()
+        self.user_login(creds.username, creds.password)
+        self.check_home_page()
diff --git a/tempest/scenario/test_encrypted_cinder_volumes.py b/tempest/scenario/test_encrypted_cinder_volumes.py
index fc93a5e..6ee9f28 100644
--- a/tempest/scenario/test_encrypted_cinder_volumes.py
+++ b/tempest/scenario/test_encrypted_cinder_volumes.py
@@ -30,8 +30,7 @@
     For both LUKS and cryptsetup encryption types, this test performs
     the following:
 
-    * Creates an image in Glance
-    * Boots an instance from the image
+    * Boots an instance from an image (CONF.compute.image_ref)
     * Creates an encryption type (as admin)
     * Creates a volume of that encryption type (as a regular user)
     * Attaches and detaches the encrypted volume to the instance
@@ -44,10 +43,9 @@
             raise cls.skipException('Encrypted volume attach is not supported')
 
     def launch_instance(self):
-        image = self.image_create()
         keypair = self.create_keypair()
 
-        return self.create_server(image_id=image, key_name=keypair['name'])
+        return self.create_server(key_name=keypair['name'])
 
     def attach_detach_volume(self, server, volume):
         attached_volume = self.nova_volume_attach(server, volume)
diff --git a/tempest/scenario/test_minbw_allocation_placement.py b/tempest/scenario/test_minbw_allocation_placement.py
index a9d15bc..8c2752d 100644
--- a/tempest/scenario/test_minbw_allocation_placement.py
+++ b/tempest/scenario/test_minbw_allocation_placement.py
@@ -20,6 +20,7 @@
 from tempest.lib.common.utils import data_utils
 from tempest.lib.common.utils import test_utils
 from tempest.lib import decorators
+from tempest.lib import exceptions as lib_exc
 from tempest.scenario import manager
 
 
@@ -54,6 +55,8 @@
     # https://github.com/openstack/placement/blob/master/placement/
     # db/constants.py#L16
     PLACEMENT_MAX_INT = 0x7FFFFFFF
+    BANDWIDTH_1 = 1000
+    BANDWIDTH_2 = 2000
 
     @classmethod
     def setup_clients(cls):
@@ -61,6 +64,7 @@
         cls.placement_client = cls.os_admin.placement_client
         cls.networks_client = cls.os_admin.networks_client
         cls.subnets_client = cls.os_admin.subnets_client
+        cls.ports_client = cls.os_primary.ports_client
         cls.routers_client = cls.os_adm.routers_client
         cls.qos_client = cls.os_admin.qos_client
         cls.qos_min_bw_client = cls.os_admin.qos_min_bw_client
@@ -78,7 +82,6 @@
     def setUp(self):
         super(MinBwAllocationPlacementTest, self).setUp()
         self._check_if_allocation_is_possible()
-        self._create_network_and_qos_policies()
 
     def _create_policy_and_min_bw_rule(self, name_prefix, min_kbps):
         policy = self.qos_client.create_qos_policy(
@@ -99,7 +102,7 @@
 
         return policy
 
-    def _create_qos_policies(self):
+    def _create_qos_basic_policies(self):
         self.qos_policy_valid = self._create_policy_and_min_bw_rule(
             name_prefix='test_policy_valid',
             min_kbps=self.SMALLEST_POSSIBLE_BW)
@@ -107,7 +110,20 @@
             name_prefix='test_policy_not_valid',
             min_kbps=self.PLACEMENT_MAX_INT)
 
-    def _create_network_and_qos_policies(self):
+    def _create_qos_policies_from_life(self):
+        # For tempest-slow the max bandwidth configured is 1000000,
+        # https://opendev.org/openstack/tempest/src/branch/master/
+        # .zuul.yaml#L416-L420
+        self.qos_policy_1 = self._create_policy_and_min_bw_rule(
+            name_prefix='test_policy_1',
+            min_kbps=self.BANDWIDTH_1
+        )
+        self.qos_policy_2 = self._create_policy_and_min_bw_rule(
+            name_prefix='test_policy_2',
+            min_kbps=self.BANDWIDTH_2
+        )
+
+    def _create_network_and_qos_policies(self, policy_method):
         physnet_name = CONF.network_feature_enabled.qos_placement_physnet
         base_segm = \
             CONF.network_feature_enabled.provider_net_base_segmentation_id
@@ -123,7 +139,7 @@
                 'provider:segmentation_id': base_segm
             })
 
-        self._create_qos_policies()
+        policy_method()
 
     def _check_if_allocation_is_possible(self):
         alloc_candidates = self.placement_client.list_allocation_candidates(
@@ -157,20 +173,29 @@
             status=status, ready_wait=False, raise_on_error=False)
         return server, port
 
-    def _assert_allocation_is_as_expected(self, allocations, port_id):
-        self.assertGreater(len(allocations['allocations']), 0)
+    def _assert_allocation_is_as_expected(self, consumer, port_ids,
+                                          min_kbps=SMALLEST_POSSIBLE_BW):
+        allocations = self.placement_client.list_allocations(
+            consumer)['allocations']
+        self.assertGreater(len(allocations), 0)
         bw_resource_in_alloc = False
-        for rp, resources in allocations['allocations'].items():
+        for rp, resources in allocations.items():
             if self.INGRESS_RESOURCE_CLASS in resources['resources']:
+                self.assertEqual(
+                    min_kbps,
+                    resources['resources'][self.INGRESS_RESOURCE_CLASS])
                 bw_resource_in_alloc = True
                 allocation_rp = rp
-        self.assertTrue(bw_resource_in_alloc)
+        if min_kbps:
+            self.assertTrue(bw_resource_in_alloc)
 
-        # Check binding_profile of the port is not empty and equals with the
-        # rp uuid
-        port = self.os_admin.ports_client.show_port(port_id)
-        self.assertEqual(allocation_rp,
-                         port['port']['binding:profile']['allocation'])
+            # Check binding_profile of the port is not empty and equals with
+            # the rp uuid
+            for port_id in port_ids:
+                port = self.os_admin.ports_client.show_port(port_id)
+                self.assertEqual(
+                    allocation_rp,
+                    port['port']['binding:profile']['allocation'])
 
     @decorators.idempotent_id('78625d92-212c-400e-8695-dd51706858b8')
     @utils.services('compute', 'network')
@@ -193,11 +218,11 @@
         * Create port with invalid QoS policy, and try to boot VM with that,
         it should fail.
         """
-
+        self._create_network_and_qos_policies(self._create_qos_basic_policies)
         server1, valid_port = self._boot_vm_with_min_bw(
             qos_policy_id=self.qos_policy_valid['id'])
-        allocations = self.placement_client.list_allocations(server1['id'])
-        self._assert_allocation_is_as_expected(allocations, valid_port['id'])
+        self._assert_allocation_is_as_expected(server1['id'],
+                                               [valid_port['id']])
 
         server2, not_valid_port = self._boot_vm_with_min_bw(
             self.qos_policy_not_valid['id'], status='ERROR')
@@ -228,27 +253,28 @@
         * If the VM goes to ACTIVE state check that allocations are as
         expected.
         """
+        self._create_network_and_qos_policies(self._create_qos_basic_policies)
         server, valid_port = self._boot_vm_with_min_bw(
             qos_policy_id=self.qos_policy_valid['id'])
-        allocations = self.placement_client.list_allocations(server['id'])
-        self._assert_allocation_is_as_expected(allocations, valid_port['id'])
+        self._assert_allocation_is_as_expected(server['id'],
+                                               [valid_port['id']])
 
         self.servers_client.migrate_server(server_id=server['id'])
         waiters.wait_for_server_status(
             client=self.os_primary.servers_client, server_id=server['id'],
             status='VERIFY_RESIZE', ready_wait=False, raise_on_error=False)
-        allocations = self.placement_client.list_allocations(server['id'])
 
         # TODO(lajoskatona): Check that the allocations are ok for the
         #  migration?
-        self._assert_allocation_is_as_expected(allocations, valid_port['id'])
+        self._assert_allocation_is_as_expected(server['id'],
+                                               [valid_port['id']])
 
         self.servers_client.confirm_resize_server(server_id=server['id'])
         waiters.wait_for_server_status(
             client=self.os_primary.servers_client, server_id=server['id'],
             status='ACTIVE', ready_wait=False, raise_on_error=True)
-        allocations = self.placement_client.list_allocations(server['id'])
-        self._assert_allocation_is_as_expected(allocations, valid_port['id'])
+        self._assert_allocation_is_as_expected(server['id'],
+                                               [valid_port['id']])
 
     @decorators.idempotent_id('c29e7fd3-035d-4993-880f-70819847683f')
     @testtools.skipUnless(CONF.compute_feature_enabled.resize,
@@ -264,10 +290,11 @@
         * If the VM goes to ACTIVE state check that allocations are as
         expected.
         """
+        self._create_network_and_qos_policies(self._create_qos_basic_policies)
         server, valid_port = self._boot_vm_with_min_bw(
             qos_policy_id=self.qos_policy_valid['id'])
-        allocations = self.placement_client.list_allocations(server['id'])
-        self._assert_allocation_is_as_expected(allocations, valid_port['id'])
+        self._assert_allocation_is_as_expected(server['id'],
+                                               [valid_port['id']])
 
         old_flavor = self.flavors_client.show_flavor(
             CONF.compute.flavor_ref)['flavor']
@@ -285,15 +312,176 @@
         waiters.wait_for_server_status(
             client=self.os_primary.servers_client, server_id=server['id'],
             status='VERIFY_RESIZE', ready_wait=False, raise_on_error=False)
-        allocations = self.placement_client.list_allocations(server['id'])
 
         # TODO(lajoskatona): Check that the allocations are ok for the
         #  migration?
-        self._assert_allocation_is_as_expected(allocations, valid_port['id'])
+        self._assert_allocation_is_as_expected(server['id'],
+                                               [valid_port['id']])
 
         self.servers_client.confirm_resize_server(server_id=server['id'])
         waiters.wait_for_server_status(
             client=self.os_primary.servers_client, server_id=server['id'],
             status='ACTIVE', ready_wait=False, raise_on_error=True)
-        allocations = self.placement_client.list_allocations(server['id'])
-        self._assert_allocation_is_as_expected(allocations, valid_port['id'])
+        self._assert_allocation_is_as_expected(server['id'],
+                                               [valid_port['id']])
+
+    @decorators.idempotent_id('79fdaa1c-df62-4738-a0f0-1cff9dc415f6')
+    @utils.services('compute', 'network')
+    def test_qos_min_bw_allocation_update_policy(self):
+        """Test the update of QoS policy on bound port
+
+        Related RFE in neutron: #1882804
+        The scenario is the following:
+        * Have a port with QoS policy and minimum bandwidth rule.
+        * Boot a VM with the port.
+        * Update the port with a new policy with different minimum bandwidth
+        values.
+        * The allocation on placement side should be according to the new
+        rules.
+        """
+        if not utils.is_network_feature_enabled('update_port_qos'):
+            raise self.skipException("update_port_qos feature is not enabled")
+
+        self._create_network_and_qos_policies(
+            self._create_qos_policies_from_life)
+
+        port = self.create_port(
+            self.prov_network['id'], qos_policy_id=self.qos_policy_1['id'])
+
+        server1 = self.create_server(
+            networks=[{'port': port['id']}])
+
+        self._assert_allocation_is_as_expected(server1['id'], [port['id']],
+                                               self.BANDWIDTH_1)
+
+        self.ports_client.update_port(
+            port['id'],
+            **{'qos_policy_id': self.qos_policy_2['id']})
+        self._assert_allocation_is_as_expected(server1['id'], [port['id']],
+                                               self.BANDWIDTH_2)
+
+        # I changed my mind
+        self.ports_client.update_port(
+            port['id'],
+            **{'qos_policy_id': self.qos_policy_1['id']})
+        self._assert_allocation_is_as_expected(server1['id'], [port['id']],
+                                               self.BANDWIDTH_1)
+
+        # bad request....
+        self.qos_policy_not_valid = self._create_policy_and_min_bw_rule(
+            name_prefix='test_policy_not_valid',
+            min_kbps=self.PLACEMENT_MAX_INT)
+        port_orig = self.ports_client.show_port(port['id'])['port']
+        self.assertRaises(
+            lib_exc.Conflict,
+            self.ports_client.update_port,
+            port['id'], **{'qos_policy_id': self.qos_policy_not_valid['id']})
+        self._assert_allocation_is_as_expected(server1['id'], [port['id']],
+                                               self.BANDWIDTH_1)
+
+        port_upd = self.ports_client.show_port(port['id'])['port']
+        self.assertEqual(port_orig['qos_policy_id'],
+                         port_upd['qos_policy_id'])
+        self.assertEqual(self.qos_policy_1['id'], port_upd['qos_policy_id'])
+
+    @decorators.idempotent_id('9cfc3bb8-f433-4c91-87b6-747cadc8958a')
+    @utils.services('compute', 'network')
+    def test_qos_min_bw_allocation_update_policy_from_zero(self):
+        """Test port without QoS policy to have QoS policy
+
+        This scenario checks if updating a port without QoS policy to
+        have QoS policy with minimum_bandwidth rule succeeds only on
+        controlplane, but placement allocation remains 0.
+        """
+        if not utils.is_network_feature_enabled('update_port_qos'):
+            raise self.skipException("update_port_qos feature is not enabled")
+
+        self._create_network_and_qos_policies(
+            self._create_qos_policies_from_life)
+
+        port = self.create_port(self.prov_network['id'])
+
+        server1 = self.create_server(
+            networks=[{'port': port['id']}])
+
+        self._assert_allocation_is_as_expected(server1['id'], [port['id']], 0)
+
+        self.ports_client.update_port(
+            port['id'], **{'qos_policy_id': self.qos_policy_2['id']})
+        self._assert_allocation_is_as_expected(server1['id'], [port['id']], 0)
+
+    @decorators.idempotent_id('a9725a70-1d28-4e3b-ae0e-450abc235962')
+    @utils.services('compute', 'network')
+    def test_qos_min_bw_allocation_update_policy_to_zero(self):
+        """Test port with QoS policy to remove QoS policy
+
+        In this scenario port with QoS minimum_bandwidth rule update to
+        remove QoS policy results in 0 placement allocation.
+        """
+        if not utils.is_network_feature_enabled('update_port_qos'):
+            raise self.skipException("update_port_qos feature is not enabled")
+
+        self._create_network_and_qos_policies(
+            self._create_qos_policies_from_life)
+
+        port = self.create_port(
+            self.prov_network['id'], qos_policy_id=self.qos_policy_1['id'])
+
+        server1 = self.create_server(
+            networks=[{'port': port['id']}])
+        self._assert_allocation_is_as_expected(server1['id'], [port['id']],
+                                               self.BANDWIDTH_1)
+
+        self.ports_client.update_port(
+            port['id'],
+            **{'qos_policy_id': None})
+        self._assert_allocation_is_as_expected(server1['id'], [port['id']], 0)
+
+    @decorators.idempotent_id('756ced7f-6f1a-43e7-a851-2fcfc16f3dd7')
+    @utils.services('compute', 'network')
+    def test_qos_min_bw_allocation_update_with_multiple_ports(self):
+        if not utils.is_network_feature_enabled('update_port_qos'):
+            raise self.skipException("update_port_qos feature is not enabled")
+
+        self._create_network_and_qos_policies(
+            self._create_qos_policies_from_life)
+
+        port1 = self.create_port(
+            self.prov_network['id'], qos_policy_id=self.qos_policy_1['id'])
+        port2 = self.create_port(
+            self.prov_network['id'], qos_policy_id=self.qos_policy_2['id'])
+
+        server1 = self.create_server(
+            networks=[{'port': port1['id']}, {'port': port2['id']}])
+        self._assert_allocation_is_as_expected(
+            server1['id'], [port1['id'], port2['id']],
+            self.BANDWIDTH_1 + self.BANDWIDTH_2)
+
+        self.ports_client.update_port(
+            port1['id'],
+            **{'qos_policy_id': self.qos_policy_2['id']})
+        self._assert_allocation_is_as_expected(
+            server1['id'], [port1['id'], port2['id']],
+            2 * self.BANDWIDTH_2)
+
+    @decorators.idempotent_id('0805779e-e03c-44fb-900f-ce97a790653b')
+    @utils.services('compute', 'network')
+    def test_empty_update(self):
+        if not utils.is_network_feature_enabled('update_port_qos'):
+            raise self.skipException("update_port_qos feature is not enabled")
+
+        self._create_network_and_qos_policies(
+            self._create_qos_policies_from_life)
+
+        port = self.create_port(
+            self.prov_network['id'], qos_policy_id=self.qos_policy_1['id'])
+
+        server1 = self.create_server(
+            networks=[{'port': port['id']}])
+        self._assert_allocation_is_as_expected(server1['id'], [port['id']],
+                                               self.BANDWIDTH_1)
+        self.ports_client.update_port(
+            port['id'],
+            **{'description': 'foo'})
+        self._assert_allocation_is_as_expected(server1['id'], [port['id']],
+                                               self.BANDWIDTH_1)
diff --git a/tempest/scenario/test_network_v6.py b/tempest/scenario/test_network_v6.py
index 14f24c7..9be28c4 100644
--- a/tempest/scenario/test_network_v6.py
+++ b/tempest/scenario/test_network_v6.py
@@ -218,7 +218,7 @@
                     guest_has_address,
                     CONF.validation.ping_timeout, 1, ssh, ip)
                 if not result:
-                    self._log_console_output(servers=[srv])
+                    self.log_console_output(servers=[srv])
                     self.fail(
                         'Address %s not configured for instance %s, '
                         'ip address output is\n%s' %
diff --git a/tempest/scenario/test_security_groups_basic_ops.py b/tempest/scenario/test_security_groups_basic_ops.py
index 3fc93e4..496a371 100644
--- a/tempest/scenario/test_security_groups_basic_ops.py
+++ b/tempest/scenario/test_security_groups_basic_ops.py
@@ -217,7 +217,7 @@
             direction='ingress',
         )
         sec_group_rules_client = tenant.manager.security_group_rules_client
-        self._create_security_group_rule(
+        self.create_security_group_rule(
             secgroup=access_sg,
             sec_group_rules_client=sec_group_rules_client,
             **ssh_rule)
@@ -385,7 +385,7 @@
             remote_group_id=tenant.security_groups['default']['id'],
             direction='ingress'
         )
-        self._create_security_group_rule(
+        self.create_security_group_rule(
             secgroup=tenant.security_groups['default'],
             security_groups_client=tenant.manager.security_groups_client,
             **ruleset
@@ -413,7 +413,7 @@
         protocol = ruleset['protocol']
         sec_group_rules_client = (
             dest_tenant.manager.security_group_rules_client)
-        self._create_security_group_rule(
+        self.create_security_group_rule(
             secgroup=dest_tenant.security_groups['default'],
             sec_group_rules_client=sec_group_rules_client,
             **ruleset
@@ -429,7 +429,7 @@
         # allow reverse traffic and check
         sec_group_rules_client = (
             source_tenant.manager.security_group_rules_client)
-        self._create_security_group_rule(
+        self.create_security_group_rule(
             secgroup=source_tenant.security_groups['default'],
             sec_group_rules_client=sec_group_rules_client,
             **ruleset
@@ -464,9 +464,9 @@
     def _log_console_output_for_all_tenants(self):
         for tenant in self.tenants.values():
             client = tenant.manager.servers_client
-            self._log_console_output(servers=tenant.servers, client=client)
+            self.log_console_output(servers=tenant.servers, client=client)
             if tenant.access_point is not None:
-                self._log_console_output(
+                self.log_console_output(
                     servers=[tenant.access_point], client=client)
 
     def _create_protocol_ruleset(self, protocol, port=80):
@@ -543,7 +543,7 @@
             direction='ingress',
         )
         sec_group_rules_client = new_tenant.manager.security_group_rules_client
-        self._create_security_group_rule(
+        self.create_security_group_rule(
             secgroup=new_sg,
             sec_group_rules_client=sec_group_rules_client,
             **icmp_rule)
@@ -596,7 +596,7 @@
             protocol='icmp',
             direction='ingress'
         )
-        self._create_security_group_rule(
+        self.create_security_group_rule(
             secgroup=tenant.security_groups['default'],
             **ruleset
         )
diff --git a/tempest/scenario/test_server_advanced_ops.py b/tempest/scenario/test_server_advanced_ops.py
index 8aa729b..990b325 100644
--- a/tempest/scenario/test_server_advanced_ops.py
+++ b/tempest/scenario/test_server_advanced_ops.py
@@ -37,7 +37,7 @@
 
     @classmethod
     def setup_credentials(cls):
-        cls.set_network_resources()
+        cls.set_network_resources(network=True, subnet=True)
         super(TestServerAdvancedOps, cls).setup_credentials()
 
     @decorators.attr(type='slow')
diff --git a/tempest/scenario/test_server_basic_ops.py b/tempest/scenario/test_server_basic_ops.py
index 02bc692..60242d5 100644
--- a/tempest/scenario/test_server_basic_ops.py
+++ b/tempest/scenario/test_server_basic_ops.py
@@ -67,7 +67,10 @@
     def verify_metadata(self):
         if self.run_ssh and CONF.compute_feature_enabled.metadata_service:
             # Verify metadata service
-            md_url = 'http://169.254.169.254/latest/meta-data/public-ipv4'
+            if CONF.network.public_network_id:
+                md_url = 'http://169.254.169.254/latest/meta-data/public-ipv4'
+            else:
+                md_url = 'http://169.254.169.254/latest/meta-data/local-ipv4'
 
             def exec_cmd_and_verify_output():
                 cmd = 'curl ' + md_url
diff --git a/tempest/test.py b/tempest/test.py
index f383bc1..68602d6 100644
--- a/tempest/test.py
+++ b/tempest/test.py
@@ -38,12 +38,6 @@
 
 CONF = config.CONF
 
-# TODO(oomichi): This test.idempotent_id should be removed after all projects
-# switch to use decorators.idempotent_id.
-idempotent_id = debtcollector.moves.moved_function(
-    decorators.idempotent_id, 'idempotent_id', __name__,
-    version='Mitaka', removal_version='?')
-
 
 attr = debtcollector.moves.moved_function(
     decorators.attr, 'attr', __name__,
diff --git a/tempest/tests/cmd/test_run.py b/tempest/tests/cmd/test_run.py
index 3c99bbe..ec7b760 100644
--- a/tempest/tests/cmd/test_run.py
+++ b/tempest/tests/cmd/test_run.py
@@ -68,6 +68,11 @@
 
 
 class TestRunReturnCode(base.TestCase):
+
+    exclude_regex = '--exclude-regex'
+    exclude_list = '--exclude-list'
+    include_list = '--include-list'
+
     def setUp(self):
         super(TestRunReturnCode, self).setUp()
         # Setup test dirs
@@ -92,6 +97,14 @@
         self.addCleanup(os.chdir, os.path.abspath(os.curdir))
         os.chdir(self.directory)
 
+    def _get_test_list_file(self, content):
+        fd, path = tempfile.mkstemp()
+        self.addCleanup(os.remove, path)
+        test_file = os.fdopen(fd, 'wb', 0)
+        self.addCleanup(test_file.close)
+        test_file.write(content.encode('utf-8'))
+        return path
+
     def assertRunExit(self, cmd, expected):
         p = subprocess.Popen(cmd, stdout=subprocess.PIPE,
                              stderr=subprocess.PIPE)
@@ -115,19 +128,23 @@
         subprocess.call(['stestr', 'init'])
         self.assertRunExit(['tempest', 'run', '--regex', 'failing'], 1)
 
-    def test_tempest_run_blackregex_failing(self):
-        self.assertRunExit(['tempest', 'run', '--black-regex', 'failing'], 0)
+    def test_tempest_run_exclude_regex_failing(self):
+        self.assertRunExit(['tempest', 'run',
+                            self.exclude_regex, 'failing'], 0)
 
-    def test_tempest_run_blackregex_failing_with_stestr_repository(self):
+    def test_tempest_run_exclude_regex_failing_with_stestr_repository(self):
         subprocess.call(['stestr', 'init'])
-        self.assertRunExit(['tempest', 'run', '--black-regex', 'failing'], 0)
+        self.assertRunExit(['tempest', 'run',
+                            self.exclude_regex, 'failing'], 0)
 
-    def test_tempest_run_blackregex_passing(self):
-        self.assertRunExit(['tempest', 'run', '--black-regex', 'passing'], 1)
+    def test_tempest_run_exclude_regex_passing(self):
+        self.assertRunExit(['tempest', 'run',
+                            self.exclude_regex, 'passing'], 1)
 
-    def test_tempest_run_blackregex_passing_with_stestr_repository(self):
+    def test_tempest_run_exclude_regex_passing_with_stestr_repository(self):
         subprocess.call(['stestr', 'init'])
-        self.assertRunExit(['tempest', 'run', '--black-regex', 'passing'], 1)
+        self.assertRunExit(['tempest', 'run',
+                            self.exclude_regex, 'passing'], 1)
 
     def test_tempest_run_fails(self):
         self.assertRunExit(['tempest', 'run'], 1)
@@ -149,47 +166,31 @@
         self.assertEqual(result, tests)
 
     def test_tempest_run_with_worker_file(self):
-        fd, path = tempfile.mkstemp()
-        self.addCleanup(os.remove, path)
-        worker_file = os.fdopen(fd, 'wb', 0)
-        self.addCleanup(worker_file.close)
-        worker_file.write(
-            '- worker:\n  - passing\n  concurrency: 3'.encode('utf-8'))
+        path = self._get_test_list_file(
+            '- worker:\n  - passing\n  concurrency: 3')
         self.assertRunExit(['tempest', 'run', '--worker-file=%s' % path], 0)
 
-    def test_tempest_run_with_whitelist(self):
-        fd, path = tempfile.mkstemp()
-        self.addCleanup(os.remove, path)
-        whitelist_file = os.fdopen(fd, 'wb', 0)
-        self.addCleanup(whitelist_file.close)
-        whitelist_file.write('passing'.encode('utf-8'))
-        self.assertRunExit(['tempest', 'run', '--whitelist-file=%s' % path], 0)
+    def test_tempest_run_with_include_list(self):
+        path = self._get_test_list_file('passing')
+        self.assertRunExit(['tempest', 'run',
+                            '%s=%s' % (self.include_list, path)], 0)
 
-    def test_tempest_run_with_whitelist_regex_include_pass_check_fail(self):
-        fd, path = tempfile.mkstemp()
-        self.addCleanup(os.remove, path)
-        whitelist_file = os.fdopen(fd, 'wb', 0)
-        self.addCleanup(whitelist_file.close)
-        whitelist_file.write('passing'.encode('utf-8'))
-        self.assertRunExit(['tempest', 'run', '--whitelist-file=%s' % path,
+    def test_tempest_run_with_include_regex_include_pass_check_fail(self):
+        path = self._get_test_list_file('passing')
+        self.assertRunExit(['tempest', 'run',
+                            '%s=%s' % (self.include_list, path),
                             '--regex', 'fail'], 1)
 
-    def test_tempest_run_with_whitelist_regex_include_pass_check_pass(self):
-        fd, path = tempfile.mkstemp()
-        self.addCleanup(os.remove, path)
-        whitelist_file = os.fdopen(fd, 'wb', 0)
-        self.addCleanup(whitelist_file.close)
-        whitelist_file.write('passing'.encode('utf-8'))
-        self.assertRunExit(['tempest', 'run', '--whitelist-file=%s' % path,
+    def test_tempest_run_with_include_regex_include_pass_check_pass(self):
+        path = self._get_test_list_file('passing')
+        self.assertRunExit(['tempest', 'run',
+                            '%s=%s' % (self.include_list, path),
                             '--regex', 'passing'], 0)
 
-    def test_tempest_run_with_whitelist_regex_include_fail_check_pass(self):
-        fd, path = tempfile.mkstemp()
-        self.addCleanup(os.remove, path)
-        whitelist_file = os.fdopen(fd, 'wb', 0)
-        self.addCleanup(whitelist_file.close)
-        whitelist_file.write('failing'.encode('utf-8'))
-        self.assertRunExit(['tempest', 'run', '--whitelist-file=%s' % path,
+    def test_tempest_run_with_include_regex_include_fail_check_pass(self):
+        path = self._get_test_list_file('failing')
+        self.assertRunExit(['tempest', 'run',
+                            '%s=%s' % (self.include_list, path),
                             '--regex', 'pass'], 1)
 
     def test_tempest_run_passes_with_config_file(self):
@@ -197,50 +198,75 @@
                             '--config-file', self.stestr_conf_file,
                             '--regex', 'passing'], 0)
 
-    def test_tempest_run_with_blacklist_failing(self):
-        fd, path = tempfile.mkstemp()
-        self.addCleanup(os.remove, path)
-        blacklist_file = os.fdopen(fd, 'wb', 0)
-        self.addCleanup(blacklist_file.close)
-        blacklist_file.write('failing'.encode('utf-8'))
-        self.assertRunExit(['tempest', 'run', '--blacklist-file=%s' % path], 0)
+    def test_tempest_run_with_exclude_list_failing(self):
+        path = self._get_test_list_file('failing')
+        self.assertRunExit(['tempest', 'run',
+                            '%s=%s' % (self.exclude_list, path)], 0)
 
-    def test_tempest_run_with_blacklist_passing(self):
-        fd, path = tempfile.mkstemp()
-        self.addCleanup(os.remove, path)
-        blacklist_file = os.fdopen(fd, 'wb', 0)
-        self.addCleanup(blacklist_file.close)
-        blacklist_file.write('passing'.encode('utf-8'))
-        self.assertRunExit(['tempest', 'run', '--blacklist-file=%s' % path], 1)
+    def test_tempest_run_with_exclude_list_passing(self):
+        path = self._get_test_list_file('passing')
+        self.assertRunExit(['tempest', 'run',
+                            '%s=%s' % (self.exclude_list, path)], 1)
 
-    def test_tempest_run_with_blacklist_regex_exclude_fail_check_pass(self):
-        fd, path = tempfile.mkstemp()
-        self.addCleanup(os.remove, path)
-        blacklist_file = os.fdopen(fd, 'wb', 0)
-        self.addCleanup(blacklist_file.close)
-        blacklist_file.write('failing'.encode('utf-8'))
-        self.assertRunExit(['tempest', 'run', '--blacklist-file=%s' % path,
+    def test_tempest_run_with_exclude_list_regex_exclude_fail_check_pass(self):
+        path = self._get_test_list_file('failing')
+        self.assertRunExit(['tempest', 'run',
+                            '%s=%s' % (self.exclude_list, path),
                             '--regex', 'pass'], 0)
 
-    def test_tempest_run_with_blacklist_regex_exclude_pass_check_pass(self):
-        fd, path = tempfile.mkstemp()
-        self.addCleanup(os.remove, path)
-        blacklist_file = os.fdopen(fd, 'wb', 0)
-        self.addCleanup(blacklist_file.close)
-        blacklist_file.write('passing'.encode('utf-8'))
-        self.assertRunExit(['tempest', 'run', '--blacklist-file=%s' % path,
+    def test_tempest_run_with_exclude_list_regex_exclude_pass_check_pass(self):
+        path = self._get_test_list_file('passing')
+        self.assertRunExit(['tempest', 'run',
+                            '%s=%s' % (self.exclude_list, path),
                             '--regex', 'pass'], 1)
 
-    def test_tempest_run_with_blacklist_regex_exclude_pass_check_fail(self):
-        fd, path = tempfile.mkstemp()
-        self.addCleanup(os.remove, path)
-        blacklist_file = os.fdopen(fd, 'wb', 0)
-        self.addCleanup(blacklist_file.close)
-        blacklist_file.write('passing'.encode('utf-8'))
-        self.assertRunExit(['tempest', 'run', '--blacklist-file=%s' % path,
+    def test_tempest_run_with_exclude_list_regex_exclude_pass_check_fail(self):
+        path = self._get_test_list_file('passing')
+        self.assertRunExit(['tempest', 'run',
+                            '%s=%s' % (self.exclude_list, path),
                             '--regex', 'fail'], 1)
 
 
+class TestOldArgRunReturnCode(TestRunReturnCode):
+    """A class for testing deprecated but still supported args.
+
+    This class will be removed once we remove the following arguments:
+      * --black-regex
+      * --blacklist-file
+      * --whitelist-file
+    """
+    exclude_regex = '--black-regex'
+    exclude_list = '--blacklist-file'
+    include_list = '--whitelist-file'
+
+    def _test_args_passing(self, args):
+        self.assertRunExit(['tempest', 'run'] + args, 0)
+
+    def test_tempest_run_new_old_arg_comb(self):
+        path = self._get_test_list_file('failing')
+        self._test_args_passing(['--black-regex', 'failing',
+                                 '--exclude-regex', 'failing'])
+        self._test_args_passing(['--blacklist-file=' + path,
+                                 '--exclude-list=' + path])
+        path = self._get_test_list_file('passing')
+        self._test_args_passing(['--whitelist-file=' + path,
+                                 '--include-list=' + path])
+
+    def _test_args_passing_with_stestr_repository(self, args):
+        subprocess.call(['stestr', 'init'])
+        self.assertRunExit(['tempest', 'run'] + args, 0)
+
+    def test_tempest_run_new_old_arg_comb_with_stestr_repository(self):
+        path = self._get_test_list_file('failing')
+        self._test_args_passing_with_stestr_repository(
+            ['--black-regex', 'failing', '--exclude-regex', 'failing'])
+        self._test_args_passing_with_stestr_repository(
+            ['--blacklist-file=' + path, '--exclude-list=' + path])
+        path = self._get_test_list_file('passing')
+        self._test_args_passing_with_stestr_repository(
+            ['--whitelist-file=' + path, '--include-list=' + path])
+
+
 class TestConfigPathCheck(base.TestCase):
     def setUp(self):
         super(TestConfigPathCheck, self).setUp()
diff --git a/tempest/tests/common/test_waiters.py b/tempest/tests/common/test_waiters.py
index ff74877..d64d7b0 100755
--- a/tempest/tests/common/test_waiters.py
+++ b/tempest/tests/common/test_waiters.py
@@ -66,7 +66,7 @@
         # Ensure waiter returns before build_timeout
         self.assertLess((end_time - start_time), 10)
 
-    def test_wait_for_image_imported_to_stores_timeout(self):
+    def test_wait_for_image_imported_to_stores_failure(self):
         time_mock = self.patch('time.time')
         client = mock.MagicMock()
         client.build_timeout = 2
@@ -77,6 +77,20 @@
             'status': 'saving',
             'stores': 'fake_store',
             'os_glance_failed_import': 'fake_os_glance_failed_import'})
+        self.assertRaises(lib_exc.OtherRestClientException,
+                          waiters.wait_for_image_imported_to_stores,
+                          client, 'fake_image_id', 'fake_store')
+
+    def test_wait_for_image_imported_to_stores_timeout(self):
+        time_mock = self.patch('time.time')
+        client = mock.MagicMock()
+        client.build_timeout = 2
+        self.patch('time.time', side_effect=[0., 1., 2.])
+        time_mock.side_effect = utils.generate_timeout_series(1)
+
+        client.show_image.return_value = ({
+            'status': 'saving',
+            'stores': 'fake_store'})
         self.assertRaises(lib_exc.TimeoutException,
                           waiters.wait_for_image_imported_to_stores,
                           client, 'fake_image_id', 'fake_store')
diff --git a/tempest/tests/lib/services/identity/v3/test_identity_providers_client.py b/tempest/tests/lib/services/identity/v3/test_identity_providers_client.py
new file mode 100644
index 0000000..964c51b
--- /dev/null
+++ b/tempest/tests/lib/services/identity/v3/test_identity_providers_client.py
@@ -0,0 +1,142 @@
+# Copyright 2020 Samsung Electronics Co., Ltd
+# All Rights Reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License"); you may not
+# use this file except in compliance with the License. You may obtain a copy of
+# the License at
+#
+#    http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+# License for the specific language governing permissions and limitations under
+# the License.
+
+from tempest.lib.services.identity.v3 import identity_providers_client
+from tempest.tests.lib import fake_auth_provider
+from tempest.tests.lib.services import base
+
+
+class TestIdentityProvidersClient(base.BaseServiceTest):
+    FAKE_IDENTITY_PROVIDERS_INFO = {
+        "identity_providers": [
+            {
+                "domain_id": "FAKE_DOMAIN_ID",
+                "description": "FAKE IDENTITY PROVIDER",
+                "remote_ids": ["fake_id_1", "fake_id_2"],
+                "enabled": True,
+                "id": "FAKE_ID",
+                "links": {
+                    "protocols": "http://example.com/identity/v3/" +
+                                 "OS-FEDERATION/identity_providers/" +
+                                 "FAKE_ID/protocols",
+                    "self": "http://example.com/identity/v3/OS-FEDERATION/" +
+                            "identity_providers/FAKE_ID"
+                }
+            }
+        ],
+        "links": {
+            "next": None,
+            "previous": None,
+            "self": "http://example.com/identity/v3/OS-FEDERATION/" +
+                    "identity_providers"
+        }
+    }
+
+    FAKE_IDENTITY_PROVIDER_INFO = {
+        "identity_provider": {
+            "authorization_ttl": None,
+            "domain_id": "FAKE_DOMAIN_ID",
+            "description": "FAKE IDENTITY PROVIDER",
+            "remote_ids": ["fake_id_1", "fake_id_2"],
+            "enabled": True,
+            "id": "ACME",
+            "links": {
+                "protocols": "http://example.com/identity/v3/OS-FEDERATION/" +
+                             "identity_providers/FAKE_ID/protocols",
+                "self": "http://example.com/identity/v3/OS-FEDERATION/" +
+                        "identity_providers/FAKE_ID"
+            }
+        }
+    }
+
+    def setUp(self):
+        super(TestIdentityProvidersClient, self).setUp()
+        fake_auth = fake_auth_provider.FakeAuthProvider()
+        self.client = identity_providers_client.IdentityProvidersClient(
+            fake_auth, 'identity', 'regionOne')
+
+    def _test_register_identity_provider(self, bytes_body=False):
+        self.check_service_client_function(
+            self.client.register_identity_provider,
+            'tempest.lib.common.rest_client.RestClient.put',
+            self.FAKE_IDENTITY_PROVIDER_INFO,
+            bytes_body,
+            identity_provider_id="FAKE_ID",
+            status=201)
+
+    def _test_list_identity_providers(self, bytes_body=False):
+        self.check_service_client_function(
+            self.client.list_identity_providers,
+            'tempest.lib.common.rest_client.RestClient.get',
+            self.FAKE_IDENTITY_PROVIDERS_INFO,
+            bytes_body,
+            status=200)
+
+    def _test_get_identity_provider(self, bytes_body=False):
+        self.check_service_client_function(
+            self.client.get_identity_provider,
+            'tempest.lib.common.rest_client.RestClient.get',
+            self.FAKE_IDENTITY_PROVIDER_INFO,
+            bytes_body,
+            identity_provider_id="FAKE_ID",
+            status=200)
+
+    def _test_delete_identity_provider(self, bytes_body=False):
+        self.check_service_client_function(
+            self.client.delete_identity_provider,
+            'tempest.lib.common.rest_client.RestClient.delete',
+            {},
+            bytes_body,
+            identity_provider_id="FAKE_ID",
+            status=204)
+
+    def _test_update_identity_provider(self, bytes_body=False):
+        self.check_service_client_function(
+            self.client.update_identity_provider,
+            'tempest.lib.common.rest_client.RestClient.patch',
+            self.FAKE_IDENTITY_PROVIDER_INFO,
+            bytes_body,
+            identity_provider_id="FAKE_ID",
+            status=200)
+
+    def test_register_identity_provider_with_str_body(self):
+        self._test_register_identity_provider()
+
+    def test_register_identity_provider_with_bytes_body(self):
+        self._test_register_identity_provider(bytes_body=True)
+
+    def test_list_identity_providers_with_str_body(self):
+        self._test_list_identity_providers()
+
+    def test_list_identity_providers_with_bytes_body(self):
+        self._test_list_identity_providers(bytes_body=True)
+
+    def test_get_identity_provider_with_str_body(self):
+        self._test_get_identity_provider()
+
+    def test_get_identity_provider_with_bytes_body(self):
+        self._test_get_identity_provider(bytes_body=True)
+
+    def test_delete_identity_provider_with_str_body(self):
+        self._test_delete_identity_provider()
+
+    def test_delete_identity_provider_with_bytes_body(self):
+        self._test_delete_identity_provider(bytes_body=True)
+
+    def test_update_identity_provider_with_str_body(self):
+        self._test_update_identity_provider()
+
+    def test_update_identity_provider_with_bytes_body(self):
+        self._test_update_identity_provider(bytes_body=True)
diff --git a/tempest/tests/lib/services/identity/v3/test_mappings_client.py b/tempest/tests/lib/services/identity/v3/test_mappings_client.py
new file mode 100644
index 0000000..845a3f9
--- /dev/null
+++ b/tempest/tests/lib/services/identity/v3/test_mappings_client.py
@@ -0,0 +1,183 @@
+# Copyright 2020 Samsung Electronics Co., Ltd
+# All Rights Reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License"); you may not
+# use this file except in compliance with the License. You may obtain a copy of
+# the License at
+#
+#    http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+# License for the specific language governing permissions and limitations under
+# the License.
+
+from tempest.lib.services.identity.v3 import mappings_client
+from tempest.tests.lib import fake_auth_provider
+from tempest.tests.lib.services import base
+
+
+class TestMappingsClient(base.BaseServiceTest):
+    FAKE_MAPPING_INFO = {
+        "mapping": {
+            "id": "fake123",
+            "links": {
+                "self": "http://example.com/identity/v3/OS-FEDERATION/" +
+                        "mappings/fake123"
+            },
+            "rules": [
+                {
+                    "local": [
+                        {
+                            "user": {
+                                "name": "{0}"
+                            }
+                        },
+                        {
+                            "group": {
+                                "id": "0cd5e9"
+                            }
+                        }
+                    ],
+                    "remote": [
+                        {
+                            "type": "UserName"
+                        },
+                        {
+                            "type": "orgPersonType",
+                            "not_any_of": [
+                                "Contractor",
+                                "Guest"
+                            ]
+                        }
+                    ]
+                }
+            ]
+        }
+    }
+
+    FAKE_MAPPINGS_INFO = {
+        "links": {
+            "next": None,
+            "previous": None,
+            "self": "http://example.com/identity/v3/OS-FEDERATION/mappings"
+        },
+        "mappings": [
+            {
+                "id": "fake123",
+                "links": {
+                    "self": "http://example.com/identity/v3/OS-FEDERATION/" +
+                            "mappings/fake123"
+                },
+                "rules": [
+                    {
+                        "local": [
+                            {
+                                "user": {
+                                    "name": "{0}"
+                                }
+                            },
+                            {
+                                "group": {
+                                    "id": "0cd5e9"
+                                }
+                            }
+                        ],
+                        "remote": [
+                            {
+                                "type": "UserName"
+                            },
+                            {
+                                "type": "orgPersonType",
+                                "any_one_of": [
+                                    "Contractor",
+                                    "SubContractor"
+                                ]
+                            }
+                        ]
+                    }
+                ]
+            }
+        ]
+    }
+
+    def setUp(self):
+        super(TestMappingsClient, self).setUp()
+        fake_auth = fake_auth_provider.FakeAuthProvider()
+        self.client = mappings_client.MappingsClient(
+            fake_auth, 'identity', 'regionOne')
+
+    def _test_create_mapping(self, bytes_body=False):
+        self.check_service_client_function(
+            self.client.create_mapping,
+            'tempest.lib.common.rest_client.RestClient.put',
+            self.FAKE_MAPPING_INFO,
+            bytes_body,
+            mapping_id="fake123",
+            status=201)
+
+    def _test_get_mapping(self, bytes_body=False):
+        self.check_service_client_function(
+            self.client.get_mapping,
+            'tempest.lib.common.rest_client.RestClient.get',
+            self.FAKE_MAPPING_INFO,
+            bytes_body,
+            mapping_id="fake123",
+            status=200)
+
+    def _test_update_mapping(self, bytes_body=False):
+        self.check_service_client_function(
+            self.client.update_mapping,
+            'tempest.lib.common.rest_client.RestClient.patch',
+            self.FAKE_MAPPING_INFO,
+            bytes_body,
+            mapping_id="fake123",
+            status=200)
+
+    def _test_list_mappings(self, bytes_body=False):
+        self.check_service_client_function(
+            self.client.list_mappings,
+            'tempest.lib.common.rest_client.RestClient.get',
+            self.FAKE_MAPPINGS_INFO,
+            bytes_body,
+            status=200)
+
+    def _test_delete_mapping(self, bytes_body=False):
+        self.check_service_client_function(
+            self.client.delete_mapping,
+            'tempest.lib.common.rest_client.RestClient.delete',
+            {},
+            bytes_body,
+            mapping_id="fake123",
+            status=204)
+
+    def test_create_mapping_with_str_body(self):
+        self._test_create_mapping()
+
+    def test_create_mapping_with_bytes_body(self):
+        self._test_create_mapping(bytes_body=True)
+
+    def test_get_mapping_with_str_body(self):
+        self._test_get_mapping()
+
+    def test_get_mapping_with_bytes_body(self):
+        self._test_get_mapping(bytes_body=True)
+
+    def test_update_mapping_with_str_body(self):
+        self._test_update_mapping()
+
+    def test_update_mapping_with_bytes_body(self):
+        self._test_update_mapping(bytes_body=True)
+
+    def test_list_mappings_with_str_body(self):
+        self._test_list_mappings()
+
+    def test_list_mappings_with_bytes_body(self):
+        self._test_list_mappings(bytes_body=True)
+
+    def test_delete_mapping_with_str_body(self):
+        self._test_delete_mapping()
+
+    def test_delete_mapping_with_bytes_body(self):
+        self._test_delete_mapping(bytes_body=True)
diff --git a/tempest/tests/lib/services/identity/v3/test_protocols_client.py b/tempest/tests/lib/services/identity/v3/test_protocols_client.py
new file mode 100644
index 0000000..c1d04f4
--- /dev/null
+++ b/tempest/tests/lib/services/identity/v3/test_protocols_client.py
@@ -0,0 +1,140 @@
+# Copyright 2020 Samsung Electronics Co., Ltd
+# All Rights Reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License"); you may not
+# use this file except in compliance with the License. You may obtain a copy of
+# the License at
+#
+#    http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+# License for the specific language governing permissions and limitations under
+# the License.
+
+from tempest.lib.services.identity.v3 import protocols_client
+from tempest.tests.lib import fake_auth_provider
+from tempest.tests.lib.services import base
+
+
+class TestProtocolsClient(base.BaseServiceTest):
+    FAKE_PROTOCOLS_INFO = {
+        "links": {
+            "next": None,
+            "previous": None,
+            "self": "http://example.com/identity/v3/OS-FEDERATION/" +
+                    "identity_providers/FAKE_ID/protocols"
+        },
+        "protocols": [
+            {
+                "id": "fake_id1",
+                "links": {
+                    "identity_provider": "http://example.com/identity/v3/" +
+                                         "OS-FEDERATION/identity_providers/" +
+                                         "FAKE_ID",
+                    "self": "http://example.com/identity/v3/OS-FEDERATION/"
+                            "identity_providers/FAKE_ID/protocols/fake_id1"
+                },
+                "mapping_id": "fake123"
+            }
+        ]
+    }
+
+    FAKE_PROTOCOL_INFO = {
+        "protocol": {
+            "id": "fake_id1",
+            "links": {
+                "identity_provider": "http://example.com/identity/v3/OS-" +
+                                     "FEDERATION/identity_providers/FAKE_ID",
+                "self": "http://example.com/identity/v3/OS-FEDERATION/" +
+                        "identity_providers/FAKE_ID/protocols/fake_id1"
+            },
+            "mapping_id": "fake123"
+        }
+    }
+
+    def setUp(self):
+        super(TestProtocolsClient, self).setUp()
+        fake_auth = fake_auth_provider.FakeAuthProvider()
+        self.client = protocols_client.ProtocolsClient(
+            fake_auth, 'identity', 'regionOne')
+
+    def _test_add_protocol_to_identity_provider(self, bytes_body=False):
+        self.check_service_client_function(
+            self.client.add_protocol_to_identity_provider,
+            'tempest.lib.common.rest_client.RestClient.put',
+            self.FAKE_PROTOCOL_INFO,
+            bytes_body,
+            idp_id="FAKE_ID",
+            protocol_id="fake_id1",
+            status=201)
+
+    def _test_list_protocols_of_identity_provider(self, bytes_body=False):
+        self.check_service_client_function(
+            self.client.list_protocols_of_identity_provider,
+            'tempest.lib.common.rest_client.RestClient.get',
+            self.FAKE_PROTOCOLS_INFO,
+            bytes_body,
+            idp_id="FAKE_ID",
+            status=200)
+
+    def _test_get_protocol_for_identity_provider(self, bytes_body=False):
+        self.check_service_client_function(
+            self.client.get_protocol_for_identity_provider,
+            'tempest.lib.common.rest_client.RestClient.get',
+            self.FAKE_PROTOCOL_INFO,
+            bytes_body,
+            idp_id="FAKE_ID",
+            protocol_id="fake_id1",
+            status=200)
+
+    def _test_update_mapping_for_identity_provider(self, bytes_body=False):
+        self.check_service_client_function(
+            self.client.update_mapping_for_identity_provider,
+            'tempest.lib.common.rest_client.RestClient.patch',
+            self.FAKE_PROTOCOL_INFO,
+            bytes_body,
+            idp_id="FAKE_ID",
+            protocol_id="fake_id1",
+            status=200)
+
+    def _test_delete_protocol_from_identity_provider(self, bytes_body=False):
+        self.check_service_client_function(
+            self.client.delete_protocol_from_identity_provider,
+            'tempest.lib.common.rest_client.RestClient.delete',
+            {},
+            bytes_body,
+            idp_id="FAKE_ID",
+            protocol_id="fake_id1",
+            status=204)
+
+    def test_add_protocol_to_identity_provider_with_str_body(self):
+        self._test_add_protocol_to_identity_provider()
+
+    def test_add_protocol_to_identity_provider_with_bytes_body(self):
+        self._test_add_protocol_to_identity_provider(bytes_body=True)
+
+    def test_list_protocols_of_identity_provider_with_str_body(self):
+        self._test_list_protocols_of_identity_provider()
+
+    def test_list_protocols_of_identity_provider_with_bytes_body(self):
+        self._test_list_protocols_of_identity_provider(bytes_body=True)
+
+    def test_get_protocol_for_identity_provider_with_str_body(self):
+        self._test_get_protocol_for_identity_provider()
+
+    def test_get_protocol_for_identity_provider_with_bytes_body(self):
+        self._test_get_protocol_for_identity_provider(bytes_body=True)
+
+    def test_update_mapping_for_identity_provider_with_str_body(self):
+        self._test_update_mapping_for_identity_provider()
+
+    def test_update_mapping_for_identity_provider_with_bytes_body(self):
+        self._test_update_mapping_for_identity_provider(bytes_body=True)
+
+    def test_delete_protocol_from_identity_provider_with_str_body(self):
+        self._test_delete_protocol_from_identity_provider()
+
+    def test_delete_protocol_from_identity_provider_with_bytes_body(self):
+        self._test_delete_protocol_from_identity_provider(bytes_body=False)
diff --git a/tempest/tests/lib/services/identity/v3/test_service_providers_client.py b/tempest/tests/lib/services/identity/v3/test_service_providers_client.py
new file mode 100644
index 0000000..ec908bc
--- /dev/null
+++ b/tempest/tests/lib/services/identity/v3/test_service_providers_client.py
@@ -0,0 +1,157 @@
+# Copyright 2020 Samsung Electronics Co., Ltd
+# All Rights Reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License"); you may not
+# use this file except in compliance with the License. You may obtain a copy of
+# the License at
+#
+#    http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+# License for the specific language governing permissions and limitations under
+# the License.
+
+from tempest.lib.services.identity.v3 import service_providers_client
+from tempest.tests.lib import fake_auth_provider
+from tempest.tests.lib.services import base
+
+
+class TestServiceProvidersClient(base.BaseServiceTest):
+    FAKE_SERVICE_PROVIDER_INFO = {
+        "service_provider": {
+            "auth_url": "https://example.com/identity/v3/OS-FEDERATION/" +
+                        "identity_providers/FAKE_ID/protocols/fake_id1/auth",
+            "description": "Fake Service Provider",
+            "enabled": True,
+            "id": "FAKE_ID",
+            "links": {
+                "self": "https://example.com/identity/v3/OS-FEDERATION/" +
+                        "service_providers/FAKE_ID"
+            },
+            "relay_state_prefix": "ss:mem:",
+            "sp_url": "https://example.com/identity/Shibboleth.sso/" +
+                      "FAKE_ID1/ECP"
+        }
+    }
+
+    FAKE_SERVICE_PROVIDERS_INFO = {
+        "links": {
+            "next": None,
+            "previous": None,
+            "self": "http://example.com/identity/v3/OS-FEDERATION/" +
+                    "service_providers"
+        },
+        "service_providers": [
+            {
+                "auth_url": "https://example.com/identity/v3/OS-FEDERATION/" +
+                            "identity_providers/acme/protocols/saml2/auth",
+                "description": "Stores ACME identities",
+                "enabled": True,
+                "id": "ACME",
+                "links": {
+                    "self": "http://example.com/identity/v3/OS-FEDERATION/" +
+                            "service_providers/ACME"
+                },
+                "relay_state_prefix": "ss:mem:",
+                "sp_url": "https://example.com/identity/Shibboleth.sso/" +
+                          "SAML2/ECP"
+            },
+            {
+                "auth_url": "https://other.example.com/identity/v3/" +
+                            "OS-FEDERATION/identity_providers/acme/" +
+                            "protocols/saml2/auth",
+                "description": "Stores contractor identities",
+                "enabled": False,
+                "id": "ACME-contractors",
+                "links": {
+                    "self": "http://example.com/identity/v3/OS-FEDERATION/" +
+                            "service_providers/ACME-contractors"
+                },
+                "relay_state_prefix": "ss:mem:",
+                "sp_url": "https://other.example.com/identity/Shibboleth" +
+                          ".sso/SAML2/ECP"
+            }
+        ]
+    }
+
+    def setUp(self):
+        super(TestServiceProvidersClient, self).setUp()
+        fake_auth = fake_auth_provider.FakeAuthProvider()
+        self.client = service_providers_client.ServiceProvidersClient(
+            fake_auth, 'identity', 'regionOne')
+
+    def _test_register_service_provider(self, bytes_body=False):
+        self.check_service_client_function(
+            self.client.register_service_provider,
+            'tempest.lib.common.rest_client.RestClient.put',
+            self.FAKE_SERVICE_PROVIDER_INFO,
+            bytes_body,
+            service_provider_id="FAKE_ID",
+            status=201)
+
+    def _test_list_service_providers(self, bytes_body=False):
+        self.check_service_client_function(
+            self.client.list_service_providers,
+            'tempest.lib.common.rest_client.RestClient.get',
+            self.FAKE_SERVICE_PROVIDERS_INFO,
+            bytes_body,
+            status=200)
+
+    def _test_get_service_provider(self, bytes_body=False):
+        self.check_service_client_function(
+            self.client.get_service_provider,
+            'tempest.lib.common.rest_client.RestClient.get',
+            self.FAKE_SERVICE_PROVIDER_INFO,
+            bytes_body,
+            service_provider_id="FAKE_ID",
+            status=200)
+
+    def _test_delete_service_provider(self, bytes_body=False):
+        self.check_service_client_function(
+            self.client.delete_service_provider,
+            'tempest.lib.common.rest_client.RestClient.delete',
+            {},
+            bytes_body,
+            service_provider_id="FAKE_ID",
+            status=204)
+
+    def _test_update_service_provider(self, bytes_body=False):
+        self.check_service_client_function(
+            self.client.update_service_provider,
+            'tempest.lib.common.rest_client.RestClient.patch',
+            self.FAKE_SERVICE_PROVIDER_INFO,
+            bytes_body,
+            service_provider_id="FAKE_ID",
+            status=200)
+
+    def test_register_service_provider_with_str_body(self):
+        self._test_register_service_provider()
+
+    def test_register_service_provider_with_bytes_body(self):
+        self._test_register_service_provider(bytes_body=True)
+
+    def test_list_service_providers_with_str_body(self):
+        self._test_list_service_providers()
+
+    def test_list_service_providers_with_bytes_body(self):
+        self._test_list_service_providers(bytes_body=True)
+
+    def test_get_service_provider_with_str_body(self):
+        self._test_get_service_provider()
+
+    def test_get_service_provider_with_bytes_body(self):
+        self._test_get_service_provider(bytes_body=True)
+
+    def test_delete_service_provider_with_str_body(self):
+        self._test_delete_service_provider()
+
+    def test_delete_service_provider_with_bytes_body(self):
+        self._test_delete_service_provider(bytes_body=True)
+
+    def test_update_service_provider_with_str_body(self):
+        self._test_update_service_provider()
+
+    def test_update_service_provider_with_bytes_body(self):
+        self._test_update_service_provider(bytes_body=True)
diff --git a/tempest/tests/lib/services/identity/v3/test_trusts_client.py b/tempest/tests/lib/services/identity/v3/test_trusts_client.py
index a1ca020..33dca7d 100644
--- a/tempest/tests/lib/services/identity/v3/test_trusts_client.py
+++ b/tempest/tests/lib/services/identity/v3/test_trusts_client.py
@@ -94,6 +94,35 @@
             }
         }
 
+    FAKE_LIST_TRUSTS_ROLES = {
+        "roles": [
+            {
+                "id": "c1648e",
+                "links": {
+                    "self": "http://example.com/identity/v3/roles/c1648e"
+                    },
+                "name": "manager"
+                },
+            {
+                "id": "ed7b78",
+                "links": {
+                    "self": "http://example.com/identity/v3/roles/ed7b78"
+                    },
+                "name": "member"
+                }
+            ]
+        }
+
+    FAKE_TRUST_ROLE = {
+        "role": {
+            "id": "c1648e",
+            "links": {
+                "self": "http://example.com/identity/v3/roles/c1648e"
+                },
+            "name": "manager"
+            }
+        }
+
     def setUp(self):
         super(TestTrustsClient, self).setUp()
         fake_auth = fake_auth_provider.FakeAuthProvider()
@@ -123,6 +152,43 @@
             self.FAKE_LIST_TRUSTS,
             bytes_body)
 
+    def _test_list_trust_roles(self, bytes_body=False):
+        self.check_service_client_function(
+            self.client.list_trust_roles,
+            'tempest.lib.common.rest_client.RestClient.get',
+            self.FAKE_LIST_TRUSTS_ROLES,
+            bytes_body,
+            trust_id="1ff900")
+
+    def test_check_trust_role(self):
+        self.check_service_client_function(
+            self.client.check_trust_role,
+            'tempest.lib.common.rest_client.RestClient.head',
+            {},
+            trust_id="1ff900",
+            role_id="ed7b78")
+
+    def _check_show_trust_role(self, bytes_body=False):
+        self.check_service_client_function(
+            self.client.show_trust_role,
+            'tempest.lib.common.rest_client.RestClient.get',
+            self.FAKE_TRUST_ROLE,
+            bytes_body,
+            trust_id="1ff900",
+            role_id="ed7b78")
+
+    def test_list_trust_roles_with_str_body(self):
+        self._test_list_trust_roles()
+
+    def test_list_trust_roles_with_bytes_body(self):
+        self._test_list_trust_roles(bytes_body=True)
+
+    def test_check_show_trust_role_with_str_body(self):
+        self._check_show_trust_role()
+
+    def test_check_show_trust_role_with_bytes_body(self):
+        self._check_show_trust_role(bytes_body=True)
+
     def test_create_trust_with_str_body(self):
         self._test_create_trust()
 
diff --git a/tempest/tests/lib/services/network/test_ports_client.py b/tempest/tests/lib/services/network/test_ports_client.py
index 20ef3f1..9ca9ac6 100644
--- a/tempest/tests/lib/services/network/test_ports_client.py
+++ b/tempest/tests/lib/services/network/test_ports_client.py
@@ -22,53 +22,126 @@
 
 class TestPortsClient(base.BaseServiceTest):
 
+    FAKE_CREATE_PORTS = {
+        "port": {
+            "binding:host_id": "4df8d9ff-6f6f-438f-90a1-ef660d4586ad",
+            "binding:profile": {
+                "local_link_information": [
+                    {
+                        "port_id": "Ethernet3/1",
+                        "switch_id": "0a:1b:2c:3d:4e:5f",
+                        "switch_info": "switch1"
+                    }
+                ]
+            },
+            "binding:vnic_type": "baremetal",
+            "device_id": "d90a13da-be41-461f-9f99-1dbcf438fdf2",
+            "device_owner": "baremetal:none",
+            "dns_domain": "my-domain.org.",
+            "dns_name": "myport",
+            "qos_policy_id": "29d5e02e-d5ab-4929-bee4-4a9fc12e22ae",
+            "uplink_status_propagation": False
+        }
+    }
+
     FAKE_PORTS = {
         "ports": [
             {
                 "admin_state_up": True,
                 "allowed_address_pairs": [],
+                "created_at": "2016-03-08T20:19:41",
                 "data_plane_status": None,
                 "description": "",
                 "device_id": "9ae135f4-b6e0-4dad-9e91-3c223e385824",
                 "device_owner": "network:router_gateway",
-                "extra_dhcp_opts": [],
+                "dns_assignment": [
+                    {
+                        "hostname": "myport",
+                        "ip_address": "172.24.4.2",
+                        "fqdn": "myport.my-domain.org"
+                    }
+                ],
+                "dns_domain": "my-domain.org.",
+                "dns_name": "myport",
+                "extra_dhcp_opts": [
+                    {
+                        "opt_value": "pxelinux.0",
+                        "ip_version": 4,
+                        "opt_name": "bootfile-name"
+                    }
+                ],
                 "fixed_ips": [
                     {
                         "ip_address": "172.24.4.2",
-                        "subnet_id": "008ba151-0b8c-4a67-98b5-0d2b87666062"
+                        "subnet_id":
+                            "008ba151-0b8c-4a67-98b5-0d2b87666062"
                     }
                 ],
                 "id": "d80b1a3b-4fc1-49f3-952e-1e2ab7081d8b",
+                "ip_allocation": "immediate",
                 "mac_address": "fa:16:3e:58:42:ed",
                 "name": "",
                 "network_id": "70c1db1f-b701-45bd-96e0-a313ee3430b3",
                 "project_id": "",
+                "revision_number": 1,
                 "security_groups": [],
                 "status": "ACTIVE",
-                "tenant_id": ""
+                "tags": ["tag1,tag2"],
+                "tenant_id": "d6700c0c9ffa4f1cb322cd4a1f3906fa",
+                "updated_at": "2016-03-08T20:19:41",
+                "qos_network_policy_id":
+                    "174dd0c1-a4eb-49d4-a807-ae80246d82f4",
+                "qos_policy_id": "29d5e02e-d5ab-4929-bee4-4a9fc12e22ae",
+                "port_security_enabled": False,
+                "uplink_status_propagation": False
             },
             {
                 "admin_state_up": True,
                 "allowed_address_pairs": [],
+                "created_at": "2016-03-08T20:19:41",
                 "data_plane_status": None,
                 "description": "",
                 "device_id": "9ae135f4-b6e0-4dad-9e91-3c223e385824",
                 "device_owner": "network:router_interface",
-                "extra_dhcp_opts": [],
+                "dns_assignment": [
+                    {
+                        "hostname": "myport2",
+                        "ip_address": "10.0.0.1",
+                        "fqdn": "myport2.my-domain.org"
+                    }
+                ],
+                "dns_domain": "my-domain.org.",
+                "dns_name": "myport2",
+                "extra_dhcp_opts": [
+                    {
+                        "opt_value": "pxelinux.0",
+                        "ip_version": 4,
+                        "opt_name": "bootfile-name"
+                    }
+                ],
                 "fixed_ips": [
                     {
                         "ip_address": "10.0.0.1",
-                        "subnet_id": "288bf4a1-51ba-43b6-9d0a-520e9005db17"
+                        "subnet_id":
+                            "288bf4a1-51ba-43b6-9d0a-520e9005db17"
                     }
                 ],
                 "id": "f71a6703-d6de-4be1-a91a-a570ede1d159",
+                "ip_allocation": "immediate",
                 "mac_address": "fa:16:3e:bb:3c:e4",
                 "name": "",
                 "network_id": "f27aa545-cbdd-4907-b0c6-c9e8b039dcc2",
                 "project_id": "d397de8a63f341818f198abb0966f6f3",
+                "revision_number": 1,
                 "security_groups": [],
                 "status": "ACTIVE",
-                "tenant_id": "d397de8a63f341818f198abb0966f6f3"
+                "tags": ["tag1,tag2"],
+                "tenant_id": "d397de8a63f341818f198abb0966f6f3",
+                "updated_at": "2016-03-08T20:19:41",
+                "qos_network_policy_id": None,
+                "qos_policy_id": None,
+                "port_security_enabled": False,
+                "uplink_status_propagation": False
             }
         ]
     }
@@ -112,7 +185,7 @@
         self.check_service_client_function(
             self.ports_client.create_port,
             "tempest.lib.common.rest_client.RestClient.post",
-            {"port": self.FAKE_PORTS["ports"][0]},
+            self.FAKE_CREATE_PORTS,
             bytes_body,
             201,
             **self.FAKE_PORT1)
diff --git a/tempest/tests/lib/services/object_storage/test_object_client.py b/tempest/tests/lib/services/object_storage/test_object_client.py
index c646d61..d6df243 100644
--- a/tempest/tests/lib/services/object_storage/test_object_client.py
+++ b/tempest/tests/lib/services/object_storage/test_object_client.py
@@ -31,15 +31,18 @@
         self.object_client = object_client.ObjectClient(self.fake_auth,
                                                         'swift', 'region1')
 
-    @mock.patch.object(object_client, '_create_connection')
+    @mock.patch('tempest.lib.services.object_storage.object_client.'
+                'ObjectClient._create_connection')
     def test_create_object_continue_no_data(self, mock_poc):
         self._validate_create_object_continue(None, mock_poc)
 
-    @mock.patch.object(object_client, '_create_connection')
+    @mock.patch('tempest.lib.services.object_storage.object_client.'
+                'ObjectClient._create_connection')
     def test_create_object_continue_with_data(self, mock_poc):
         self._validate_create_object_continue('hello', mock_poc)
 
-    @mock.patch.object(object_client, '_create_connection')
+    @mock.patch('tempest.lib.services.object_storage.object_client.'
+                'ObjectClient._create_connection')
     def test_create_continue_with_no_continue_received(self, mock_poc):
         self._validate_create_object_continue('hello', mock_poc,
                                               initial_status=201)
diff --git a/tempest/tests/test_decorators.py b/tempest/tests/test_decorators.py
index 6018441..1889420 100644
--- a/tempest/tests/test_decorators.py
+++ b/tempest/tests/test_decorators.py
@@ -19,7 +19,6 @@
 from tempest.common import utils
 from tempest import config
 from tempest import exceptions
-from tempest.lib.common.utils import data_utils
 from tempest import test
 from tempest.tests import base
 from tempest.tests import fake_config
@@ -33,47 +32,6 @@
                          fake_config.FakePrivate)
 
 
-# NOTE: The test module is for tempest.test.idempotent_id.
-# After all projects switch to use decorators.idempotent_id,
-# we can remove tempest.test.idempotent_id as well as this
-# test module
-class TestIdempotentIdDecorator(BaseDecoratorsTest):
-
-    def _test_helper(self, _id, **decorator_args):
-        @test.idempotent_id(_id)
-        def foo():
-            """Docstring"""
-            pass
-
-        return foo
-
-    def _test_helper_without_doc(self, _id, **decorator_args):
-        @test.idempotent_id(_id)
-        def foo():
-            pass
-
-        return foo
-
-    def test_positive(self):
-        _id = data_utils.rand_uuid()
-        foo = self._test_helper(_id)
-        self.assertIn('id-%s' % _id, getattr(foo, '__testtools_attrs'))
-        self.assertTrue(foo.__doc__.startswith('Test idempotent id: %s' % _id))
-
-    def test_positive_without_doc(self):
-        _id = data_utils.rand_uuid()
-        foo = self._test_helper_without_doc(_id)
-        self.assertTrue(foo.__doc__.startswith('Test idempotent id: %s' % _id))
-
-    def test_idempotent_id_not_str(self):
-        _id = 42
-        self.assertRaises(TypeError, self._test_helper, _id)
-
-    def test_idempotent_id_not_valid_uuid(self):
-        _id = '42'
-        self.assertRaises(ValueError, self._test_helper, _id)
-
-
 class TestServicesDecorator(BaseDecoratorsTest):
     def _test_services_helper(self, *decorator_args):
         class TestFoo(test.BaseTestCase):
diff --git a/tools/check_logs.py b/tools/check_logs.py
index de7e41d..7e191a0 100755
--- a/tools/check_logs.py
+++ b/tools/check_logs.py
@@ -56,39 +56,39 @@
     's-proxy'])
 
 
-def process_files(file_specs, url_specs, whitelists):
+def process_files(file_specs, url_specs, allow_lists):
     regexp = re.compile(r"^.* (ERROR|CRITICAL|TRACE) .*\[.*\-.*\]")
     logs_with_errors = []
     for (name, filename) in file_specs:
-        whitelist = whitelists.get(name, [])
+        allow_list = allow_lists.get(name, [])
         with open(filename) as content:
-            if scan_content(content, regexp, whitelist):
+            if scan_content(content, regexp, allow_list):
                 logs_with_errors.append(name)
     for (name, url) in url_specs:
-        whitelist = whitelists.get(name, [])
+        allow_list = allow_lists.get(name, [])
         req = urlreq.Request(url)
         req.add_header('Accept-Encoding', 'gzip')
         page = urlreq.urlopen(req)
         buf = six.StringIO(page.read())
         f = gzip.GzipFile(fileobj=buf)
-        if scan_content(f.read().splitlines(), regexp, whitelist):
+        if scan_content(f.read().splitlines(), regexp, allow_list):
             logs_with_errors.append(name)
     return logs_with_errors
 
 
-def scan_content(content, regexp, whitelist):
+def scan_content(content, regexp, allow_list):
     had_errors = False
     for line in content:
         if not line.startswith("Stderr:") and regexp.match(line):
-            whitelisted = False
-            for w in whitelist:
+            allowed = False
+            for w in allow_list:
                 pat = ".*%s.*%s.*" % (w['module'].replace('.', '\\.'),
                                       w['message'])
                 if re.match(pat, line):
-                    whitelisted = True
+                    allowed = True
                     break
-            if not whitelisted or dump_all_errors:
-                if not whitelisted:
+            if not allowed or dump_all_errors:
+                if not allowed:
                     had_errors = True
     return had_errors
 
@@ -105,9 +105,9 @@
         print("Must provide exactly one of -d or -u")
         return 1
     print("Checking logs...")
-    WHITELIST_FILE = os.path.join(
+    ALLOW_LIST_FILE = os.path.join(
         os.path.abspath(os.path.dirname(os.path.dirname(__file__))),
-        "etc", "whitelist.yaml")
+        "etc", "allow-list.yaml")
 
     file_matcher = re.compile(r".*screen-([\w-]+)\.log")
     files = []
@@ -132,17 +132,17 @@
         if m:
             urls_to_process.append((m.group(1), u))
 
-    whitelists = {}
-    with open(WHITELIST_FILE) as stream:
+    allow_lists = {}
+    with open(ALLOW_LIST_FILE) as stream:
         loaded = yaml.safe_load(stream)
         if loaded:
             for (name, l) in six.iteritems(loaded):
                 for w in l:
                     assert 'module' in w, 'no module in %s' % name
                     assert 'message' in w, 'no message in %s' % name
-            whitelists = loaded
+            allow_lists = loaded
     logs_with_errors = process_files(files_to_process, urls_to_process,
-                                     whitelists)
+                                     allow_lists)
 
     failed = False
     if logs_with_errors:
@@ -164,14 +164,14 @@
 
 
 usage = """
-Find non-white-listed log errors in log files from a devstack-gate run.
+Find non-allow-listed log errors in log files from a devstack-gate run.
 Log files will be searched for ERROR or CRITICAL messages. If any
-error messages do not match any of the whitelist entries contained in
-etc/whitelist.yaml, those messages will be printed to the console and
+error messages do not match any of the allow-list entries contained in
+etc/allow-list.yaml, those messages will be printed to the console and
 failure will be returned. A file directory containing logs or a url to the
 log files of an OpenStack gate job can be provided.
 
-The whitelist yaml looks like:
+The allow-list yaml looks like:
 
 log-name:
     - module: "a.b.c"
@@ -179,7 +179,7 @@
     - module: "a.b.c"
       message: "regexp"
 
-repeated for each log file with a whitelist.
+repeated for each log file with an allow-list.
 """
 
 parser = argparse.ArgumentParser(description=usage)
diff --git a/tools/generate-tempest-plugins-list.py b/tools/generate-tempest-plugins-list.py
index 618c388..1b5b369 100644
--- a/tools/generate-tempest-plugins-list.py
+++ b/tools/generate-tempest-plugins-list.py
@@ -32,9 +32,9 @@
 
 # List of projects having tempest plugin stale or unmaintained for a long time
 # (6 months or more)
-# TODO(masayukig): Some of these can be removed from BLACKLIST in the future
-# when the patches are merged.
-BLACKLIST = [
+# TODO(masayukig): Some of these can be removed from NON_ACTIVE_LIST in the
+# future when the patches are merged.
+NON_ACTIVE_LIST = [
     'x/gce-api',  # It looks gce-api doesn't support python3 yet.
     'x/glare',  # To avoid sanity-job failure
     'x/group-based-policy',  # It looks this doesn't support python3 yet.
@@ -52,8 +52,11 @@
     'x/tap-as-a-service',  # To avoid sanity-job failure
     'x/valet',  # https://review.opendev.org/#/c/638339/
     'x/kingbird',  # https://bugs.launchpad.net/kingbird/+bug/1869722
-    # vmware-nsx is blacklisted since https://review.opendev.org/#/c/736952
+    # vmware-nsx is excluded since https://review.opendev.org/#/c/736952
     'x/vmware-nsx-tempest-plugin',
+    # mogan is unmaintained now, remove from the list when this is merged:
+    # https://review.opendev.org/c/x/mogan/+/767718
+    'x/mogan',
 ]
 
 url = 'https://review.opendev.org/projects/'
@@ -86,10 +89,10 @@
         False
 
 
-if len(sys.argv) > 1 and sys.argv[1] == 'blacklist':
-    for black_plugin in BLACKLIST:
-        print(black_plugin)
-    # We just need BLACKLIST when we use this `blacklist` option.
+if len(sys.argv) > 1 and sys.argv[1] == 'nonactivelist':
+    for non_active_plugin in NON_ACTIVE_LIST:
+        print(non_active_plugin)
+    # We just need NON_ACTIVE_LIST when we use this `nonactivelist` option.
     # So, this exits here.
     sys.exit()
 
diff --git a/tools/generate-tempest-plugins-list.sh b/tools/generate-tempest-plugins-list.sh
index 33675ed..4430bbf 100755
--- a/tools/generate-tempest-plugins-list.sh
+++ b/tools/generate-tempest-plugins-list.sh
@@ -81,17 +81,17 @@
 
 printf "\n\n"
 
-# Print BLACKLIST
-if [[ -r doc/source/data/tempest-blacklisted-plugins-registry.header ]]; then
-    cat doc/source/data/tempest-blacklisted-plugins-registry.header
+# Print NON_ACTIVE_LIST
+if [[ -r doc/source/data/tempest-non-active-plugins-registry.header ]]; then
+    cat doc/source/data/tempest-non-active-plugins-registry.header
 fi
 
-blacklist=$(python tools/generate-tempest-plugins-list.py blacklist)
-name_col_len=$(echo "${blacklist}" | wc -L)
+nonactivelist=$(python tools/generate-tempest-plugins-list.py nonactivelist)
+name_col_len=$(echo "${nonactivelist}" | wc -L)
 name_col_len=$(( name_col_len + 20 ))
 
 printf "\n\n"
-print_plugin_table "${blacklist}"
+print_plugin_table "${nonactivelist}"
 
 printf "\n\n"
 
diff --git a/tools/tempest-integrated-gate-compute-blacklist.txt b/tools/tempest-integrated-gate-compute-exclude-list.txt
similarity index 60%
rename from tools/tempest-integrated-gate-compute-blacklist.txt
rename to tools/tempest-integrated-gate-compute-exclude-list.txt
index 2290751..8805262 100644
--- a/tools/tempest-integrated-gate-compute-blacklist.txt
+++ b/tools/tempest-integrated-gate-compute-exclude-list.txt
@@ -11,9 +11,3 @@
 tempest.scenario.test_object_storage_basic_ops.TestObjectStorageBasicOps.test_swift_basic_ops
 tempest.scenario.test_object_storage_basic_ops.TestObjectStorageBasicOps.test_swift_acl_anonymous_download
 tempest.scenario.test_volume_backup_restore.TestVolumeBackupRestore.test_volume_backup_restore
-
-# Skip test scenario when creating second image from instance
-# https://bugs.launchpad.net/tripleo/+bug/1881592
-# The test is most likely wrong and may fail if the fists image is create quickly.
-# FIXME: Either fix the test so it won't race or consider if we should cover the scenario at all.
-tempest.api.compute.images.test_images_oneserver_negative.ImagesOneServerNegativeTestJSON.test_create_second_image_when_first_image_is_being_saved
diff --git a/tools/tempest-integrated-gate-networking-blacklist.txt b/tools/tempest-integrated-gate-networking-exclude-list.txt
similarity index 100%
rename from tools/tempest-integrated-gate-networking-blacklist.txt
rename to tools/tempest-integrated-gate-networking-exclude-list.txt
diff --git a/tools/tempest-integrated-gate-object-storage-blacklist.txt b/tools/tempest-integrated-gate-object-storage-exclude-list.txt
similarity index 100%
rename from tools/tempest-integrated-gate-object-storage-blacklist.txt
rename to tools/tempest-integrated-gate-object-storage-exclude-list.txt
diff --git a/tools/tempest-integrated-gate-placement-blacklist.txt b/tools/tempest-integrated-gate-placement-exclude-list.txt
similarity index 100%
rename from tools/tempest-integrated-gate-placement-blacklist.txt
rename to tools/tempest-integrated-gate-placement-exclude-list.txt
diff --git a/tools/tempest-integrated-gate-storage-blacklist.txt b/tools/tempest-integrated-gate-storage-blacklist.txt
new file mode 120000
index 0000000..2d691f8
--- /dev/null
+++ b/tools/tempest-integrated-gate-storage-blacklist.txt
@@ -0,0 +1 @@
+tempest-integrated-gate-storage-exclude-list.txt
\ No newline at end of file
diff --git a/tools/tempest-integrated-gate-storage-blacklist.txt b/tools/tempest-integrated-gate-storage-exclude-list.txt
similarity index 100%
rename from tools/tempest-integrated-gate-storage-blacklist.txt
rename to tools/tempest-integrated-gate-storage-exclude-list.txt
diff --git a/tools/tempest-plugin-sanity.sh b/tools/tempest-plugin-sanity.sh
index c983da9..106a9c6 100644
--- a/tools/tempest-plugin-sanity.sh
+++ b/tools/tempest-plugin-sanity.sh
@@ -44,7 +44,7 @@
 # retrieve a list of projects having tempest plugins
 PROJECT_LIST="$(python tools/generate-tempest-plugins-list.py)"
 
-BLACKLIST="$(python tools/generate-tempest-plugins-list.py blacklist)"
+NON_ACTIVE_LIST="$(python tools/generate-tempest-plugins-list.py nonactivelist)"
 
 # Function to clone project using zuul-cloner or from git
 function clone_project {
@@ -117,8 +117,8 @@
 failed_plugin=''
 # Perform sanity on all tempest plugin projects
 for project in $PROJECT_LIST; do
-    # Remove blacklisted tempest plugins
-    if ! [[ `echo $BLACKLIST | grep -c $project ` -gt 0 ]]; then
+    # Remove non-active tempest plugins
+    if ! [[ `echo $NON_ACTIVE_LIST | grep -c $project ` -gt 0 ]]; then
         plugin_sanity_check $project && passed_plugin+=", $project" || \
         failed_plugin+="$project, " > $SANITY_DIR/$project.txt
     fi
diff --git a/tox.ini b/tox.ini
index d8e059a..2315163 100644
--- a/tox.ini
+++ b/tox.ini
@@ -1,6 +1,6 @@
 [tox]
 envlist = pep8,py36,py38,bashate,pip-check-reqs
-minversion = 3.1.1
+minversion = 3.18.0
 skipsdist = True
 ignore_basepython_conflict = True
 
@@ -26,7 +26,7 @@
 passenv = OS_STDOUT_CAPTURE OS_STDERR_CAPTURE OS_TEST_TIMEOUT OS_TEST_LOCK_PATH TEMPEST_CONFIG TEMPEST_CONFIG_DIR http_proxy HTTP_PROXY https_proxy HTTPS_PROXY no_proxy NO_PROXY ZUUL_CACHE_DIR REQUIREMENTS_PIP_LOCATION GENERATE_TEMPEST_PLUGIN_LIST
 usedevelop = True
 install_command = pip install {opts} {packages}
-whitelist_externals = *
+allowlist_externals = *
 deps =
     -c{env:UPPER_CONSTRAINTS_FILE:https://releases.openstack.org/constraints/upper/master}
     -r{toxinidir}/requirements.txt
@@ -108,7 +108,7 @@
 deps = {[tempestenv]deps}
 # The regex below is used to select which tests to run and exclude the slow tag:
 # See the testrepository bug: https://bugs.launchpad.net/testrepository/+bug/1208610
-# FIXME: We can replace it with the `--black-regex` option to exclude tests now.
+# FIXME: We can replace it with the `--exclude-regex` option to exclude tests now.
 commands =
     find . -type f -name "*.pyc" -delete
     tempest run --regex '(?!.*\[.*\bslow\b.*\])(^tempest\.api)' {posargs}
@@ -132,11 +132,11 @@
 setenv = {[tempestenv]setenv}
 deps = {[tempestenv]deps}
 # The regex below is used to select which tests to run and exclude the slow tag and
-# tests listed in blacklist file:
+# tests listed in exclude-list file:
 commands =
     find . -type f -name "*.pyc" -delete
-    tempest run --regex '(?!.*\[.*\bslow\b.*\])(^tempest\.api)' --blacklist_file ./tools/tempest-integrated-gate-networking-blacklist.txt {posargs}
-    tempest run --combine --serial --regex '(?!.*\[.*\bslow\b.*\])(^tempest\.scenario)' --blacklist_file ./tools/tempest-integrated-gate-networking-blacklist.txt {posargs}
+    tempest run --regex '(?!.*\[.*\bslow\b.*\])(^tempest\.api)' --exclude-list ./tools/tempest-integrated-gate-networking-exclude-list.txt {posargs}
+    tempest run --combine --serial --regex '(?!.*\[.*\bslow\b.*\])(^tempest\.scenario)' --exclude-list ./tools/tempest-integrated-gate-networking-exclude-list.txt {posargs}
 
 [testenv:integrated-compute]
 envdir = .tox/tempest
@@ -145,11 +145,11 @@
 setenv = {[tempestenv]setenv}
 deps = {[tempestenv]deps}
 # The regex below is used to select which tests to run and exclude the slow tag and
-# tests listed in blacklist file:
+# tests listed in exclude-list file:
 commands =
     find . -type f -name "*.pyc" -delete
-    tempest run --regex '(?!.*\[.*\bslow\b.*\])(^tempest\.api)' --blacklist_file ./tools/tempest-integrated-gate-compute-blacklist.txt {posargs}
-    tempest run --combine --serial --regex '(?!.*\[.*\bslow\b.*\])(^tempest\.scenario)' --blacklist_file ./tools/tempest-integrated-gate-compute-blacklist.txt {posargs}
+    tempest run --regex '(?!.*\[.*\bslow\b.*\])(^tempest\.api)' --exclude-list ./tools/tempest-integrated-gate-compute-exclude-list.txt {posargs}
+    tempest run --combine --serial --regex '(?!.*\[.*\bslow\b.*\])(^tempest\.scenario)' --exclude-list ./tools/tempest-integrated-gate-compute-exclude-list.txt {posargs}
 
 [testenv:integrated-placement]
 envdir = .tox/tempest
@@ -158,11 +158,11 @@
 setenv = {[tempestenv]setenv}
 deps = {[tempestenv]deps}
 # The regex below is used to select which tests to run and exclude the slow tag and
-# tests listed in blacklist file:
+# tests listed in exclude-list file:
 commands =
     find . -type f -name "*.pyc" -delete
-    tempest run --regex '(?!.*\[.*\bslow\b.*\])(^tempest\.api)' --blacklist_file ./tools/tempest-integrated-gate-placement-blacklist.txt {posargs}
-    tempest run --combine --serial --regex '(?!.*\[.*\bslow\b.*\])(^tempest\.scenario)' --blacklist_file ./tools/tempest-integrated-gate-placement-blacklist.txt {posargs}
+    tempest run --regex '(?!.*\[.*\bslow\b.*\])(^tempest\.api)' --exclude-list ./tools/tempest-integrated-gate-placement-exclude-list.txt {posargs}
+    tempest run --combine --serial --regex '(?!.*\[.*\bslow\b.*\])(^tempest\.scenario)' --exclude-list ./tools/tempest-integrated-gate-placement-exclude-list.txt {posargs}
 
 [testenv:integrated-storage]
 envdir = .tox/tempest
@@ -171,11 +171,11 @@
 setenv = {[tempestenv]setenv}
 deps = {[tempestenv]deps}
 # The regex below is used to select which tests to run and exclude the slow tag and
-# tests listed in blacklist file:
+# tests listed in exclude-list file:
 commands =
     find . -type f -name "*.pyc" -delete
-    tempest run --regex '(?!.*\[.*\bslow\b.*\])(^tempest\.api)' --blacklist_file ./tools/tempest-integrated-gate-storage-blacklist.txt {posargs}
-    tempest run --combine --serial --regex '(?!.*\[.*\bslow\b.*\])(^tempest\.scenario)' --blacklist_file ./tools/tempest-integrated-gate-storage-blacklist.txt {posargs}
+    tempest run --regex '(?!.*\[.*\bslow\b.*\])(^tempest\.api)' --exclude-list ./tools/tempest-integrated-gate-storage-exclude-list.txt {posargs}
+    tempest run --combine --serial --regex '(?!.*\[.*\bslow\b.*\])(^tempest\.scenario)' --exclude-list ./tools/tempest-integrated-gate-storage-exclude-list.txt {posargs}
 
 [testenv:integrated-object-storage]
 envdir = .tox/tempest
@@ -184,11 +184,11 @@
 setenv = {[tempestenv]setenv}
 deps = {[tempestenv]deps}
 # The regex below is used to select which tests to run and exclude the slow tag and
-# tests listed in blacklist file:
+# tests listed in exclude-list file:
 commands =
     find . -type f -name "*.pyc" -delete
-    tempest run --regex '(?!.*\[.*\bslow\b.*\])(^tempest\.api)' --blacklist_file ./tools/tempest-integrated-gate-object-storage-blacklist.txt {posargs}
-    tempest run --combine --serial --regex '(?!.*\[.*\bslow\b.*\])(^tempest\.scenario)' --blacklist_file ./tools/tempest-integrated-gate-object-storage-blacklist.txt {posargs}
+    tempest run --regex '(?!.*\[.*\bslow\b.*\])(^tempest\.api)' --exclude-list ./tools/tempest-integrated-gate-object-storage-exclude-list.txt {posargs}
+    tempest run --combine --serial --regex '(?!.*\[.*\bslow\b.*\])(^tempest\.scenario)' --exclude-list ./tools/tempest-integrated-gate-object-storage-exclude-list.txt {posargs}
 
 [testenv:full-serial]
 envdir = .tox/tempest
@@ -198,7 +198,7 @@
 deps = {[tempestenv]deps}
 # The regex below is used to select which tests to run and exclude the slow tag:
 # See the testrepository bug: https://bugs.launchpad.net/testrepository/+bug/1208610
-# FIXME: We can replace it with the `--black-regex` option to exclude tests now.
+# FIXME: We can replace it with the `--exclude-regex` option to exclude tests now.
 commands =
     find . -type f -name "*.pyc" -delete
     tempest run --serial --regex '(?!.*\[.*\bslow\b.*\])(^tempest\.(api|scenario))' {posargs}
@@ -290,12 +290,12 @@
   sphinx-apidoc -f -o doc/source/tests/volume tempest/api/volume
   rm -rf doc/build
   sphinx-build -W -b html doc/source doc/build/html
-whitelist_externals =
+allowlist_externals =
     rm
 
 [testenv:pdf-docs]
 deps = {[testenv:docs]deps}
-whitelist_externals =
+allowlist_externals =
    rm
    make
 commands =
@@ -369,7 +369,7 @@
   rm -rf releasenotes/build
   sphinx-build -a -E -W -d releasenotes/build/doctrees \
          -b html releasenotes/source releasenotes/build/html
-whitelist_externals = rm
+allowlist_externals = rm
 
 [testenv:bashate]
 # if you want to test out some changes you have made to bashate
@@ -377,7 +377,7 @@
 # modified bashate tree
 deps =
    {env:BASHATE_INSTALL_PATH:bashate}
-whitelist_externals = bash
+allowlist_externals = bash
 commands = bash -c "find {toxinidir}/tools    \
          -not \( -type d -name .?\* -prune \) \
          -type f                              \
@@ -406,6 +406,6 @@
 
 [testenv:plugin-sanity-check]
 # perform tempest plugin sanity
-whitelist_externals = bash
+allowlist_externals = bash
 commands =
   bash tools/tempest-plugin-sanity.sh
diff --git a/zuul.d/integrated-gate.yaml b/zuul.d/integrated-gate.yaml
index 4c1ee5a..52ccd3e 100644
--- a/zuul.d/integrated-gate.yaml
+++ b/zuul.d/integrated-gate.yaml
@@ -11,8 +11,10 @@
     vars:
       tox_envlist: all
       tempest_test_regex: tempest
-      devstack_localrc:
-        ENABLE_FILE_INJECTION: true
+      # TODO(gmann): Enable File injection tests once nova bug is fixed
+      # https://bugs.launchpad.net/nova/+bug/1882421
+      # devstack_localrc:
+      #   ENABLE_FILE_INJECTION: true
 
 - job:
     name: tempest-ipv6-only
@@ -69,6 +71,8 @@
       Former names for this job where:
         * legacy-tempest-dsvm-py35
         * gate-tempest-dsvm-py35
+    required-projects:
+      - openstack/horizon
     vars:
       tox_envlist: full
       devstack_localrc:
@@ -89,6 +93,8 @@
             network-feature-enabled:
               qos_placement_physnet: public
       devstack_services:
+        # Enbale horizon so that we can run horizon test.
+        horizon: true
         s-account: false
         s-container: false
         s-object: false
@@ -290,6 +296,8 @@
         * legacy-tempest-dsvm-neutron-scenario-multinode-lvm-multibackend
         * tempest-scenario-multinode-lvm-multibackend
     timeout: 10800
+    # This job runs on stable/stein onwards.
+    branches: ^(?!stable/(ocata|pike|queens|rocky)).*$
     vars:
       tox_envlist: slow-serial
       devstack_localrc:
@@ -310,6 +318,46 @@
           ENABLE_VOLUME_MULTIATTACH: true
 
 - job:
+    name: tempest-slow
+    parent: tempest-multinode-full
+    description: |
+      This multinode integration job will run all the tests tagged as slow.
+      It enables the lvm multibackend setup to cover few scenario tests.
+      This job will run only slow tests (API or Scenario) serially.
+
+      Former names for this job were:
+        * legacy-tempest-dsvm-neutron-scenario-multinode-lvm-multibackend
+        * tempest-scenario-multinode-lvm-multibackend
+    timeout: 10800
+    branches:
+      - stable/pike
+      - stable/queens
+      - stable/rocky
+    vars:
+      tox_envlist: slow-serial
+      devstack_localrc:
+        CINDER_ENABLED_BACKENDS: lvm:lvmdriver-1,lvm:lvmdriver-2
+        ENABLE_VOLUME_MULTIATTACH: true
+        # to avoid https://bugs.launchpad.net/neutron/+bug/1914037
+        # as we couldn't backport the fix to rocky and older releases
+        IPV6_PUBLIC_RANGE: 2001:db8:0:10::/64
+        IPV6_PUBLIC_NETWORK_GATEWAY: 2001:db8:0:10::2
+        IPV6_ROUTER_GW_IP: 2001:db8:0:10::1
+      devstack_plugins:
+        neutron: https://opendev.org/openstack/neutron
+      devstack_services:
+        neutron-placement: true
+        neutron-qos: true
+      tempest_concurrency: 2
+    group-vars:
+      # NOTE(mriedem): The ENABLE_VOLUME_MULTIATTACH variable is used on both
+      # the controller and subnode prior to Rocky so we have to make sure the
+      # variable is set in both locations.
+      subnode:
+        devstack_localrc:
+          ENABLE_VOLUME_MULTIATTACH: true
+
+- job:
     name: tempest-slow-py3
     parent: tempest-slow
     vars:
@@ -348,7 +396,9 @@
       Former name for this job was legacy-tempest-dsvm-neutron-pg-full.
     vars:
       devstack_localrc:
-        ENABLE_FILE_INJECTION: true
+        # TODO(gmann): Enable File injection tests once nova bug is fixed
+        # https://bugs.launchpad.net/nova/+bug/1882421
+        # ENABLE_FILE_INJECTION: true
         DATABASE_TYPE: postgresql
 
 - project-template:
diff --git a/zuul.d/project.yaml b/zuul.d/project.yaml
index 5dcd27f..d5b2787 100644
--- a/zuul.d/project.yaml
+++ b/zuul.d/project.yaml
@@ -8,17 +8,6 @@
       - release-notes-jobs-python3
     check:
       jobs:
-        - devstack-tempest:
-            files:
-              - ^playbooks/
-              - ^roles/
-              - ^.zuul.yaml$
-        - devstack-tempest-ipv6:
-            voting: false
-            files:
-              - ^playbooks/
-              - ^roles/
-              - ^.zuul.yaml$
         - tempest-full-parallel:
             # Define list of irrelevant files to use everywhere else
             irrelevant-files: &tempest-irrelevant-files