diff --git a/HACKING.rst b/HACKING.rst
index 5153fe1..2fa949d 100644
--- a/HACKING.rst
+++ b/HACKING.rst
@@ -122,3 +122,28 @@
 - Consistently check the status code of responses in testcases. The
   earlier a problem is detected the easier it is to debug, especially
   where there is complicated setup required.
+
+Parallel Test Exectution
+------------------------
+Tempest by default runs its tests in parallel this creates the possibility for
+interesting interactions between tests which can cause unexpected failures.
+Tenant isolation provides protection from most of the potential race conditions
+between tests outside the same class. But there are still a few of things to
+watch out for to try to avoid issues when running your tests in parallel.
+
+- Resources outside of a tenant scope still have the potential to conflict. This
+  is a larger concern for the admin tests since most resources and actions that
+  require admin privleges are outside of tenants.
+
+- Races between methods in the same class are not a problem because
+  parallelization in tempest is at the test class level, but if there is a json
+  and xml version of the same test class there could still be a race between
+  methods.
+
+- The rand_name() function from tempest.common.utils.data_utils should be used
+  anywhere a resource is created with a name. Static naming should be avoided
+  to prevent resource conflicts.
+
+- If the execution of a set of tests is required to be serialized then locking
+  can be used to perform this. See AggregatesAdminTest in
+  tempest.api.compute.admin for an example of using locking.
diff --git a/README.rst b/README.rst
index f18628a..4161cc6 100644
--- a/README.rst
+++ b/README.rst
@@ -32,16 +32,18 @@
     will have a configuration file already set up to work with your
     devstack installation.
 
-Tempest is not tied to any single test runner, but Nose been the most commonly
+Tempest is not tied to any single test runner, but testr is the most commonly
 used tool. After setting up your configuration file, you can execute
-the set of Tempest tests by using ``nosetests`` ::
+the set of Tempest tests by using ``testr`` ::
 
-    $> nosetests tempest
+    $> testr run --parallel tempest
 
 To run one single test  ::
 
-    $> nosetests -sv tempest.api.compute.servers.test_server_actions.py:
-       ServerActionsTestJSON.test_rebuild_nonexistent_server
+    $> testr run --parallel tempest.api.compute.servers.test_server_actions.ServerActionsTestJSON.test_rebuild_nonexistent_server
+
+Alternatively, you can use the run_tests.sh script which will create a venv
+and run the tests or use tox to do the same.
 
 Configuration
 -------------
diff --git a/etc/tempest.conf.sample b/etc/tempest.conf.sample
index 2f07a19..78e6aac 100644
--- a/etc/tempest.conf.sample
+++ b/etc/tempest.conf.sample
@@ -28,7 +28,8 @@
 uri = http://127.0.0.1:5000/v2.0/
 # URL for where to find the OpenStack V3 Identity API endpoint (Keystone)
 uri_v3 = http://127.0.0.1:5000/v3/
-# The identity region
+# The identity region. Also used as the other services' region name unless
+# they are set explicitly.
 region = RegionOne
 
 # This should be the username of a user WITHOUT administrative privileges
@@ -53,6 +54,9 @@
 # The above administrative user's tenant name
 admin_tenant_name = admin
 
+# The role that is required to administrate keystone.
+admin_role = admin
+
 [compute]
 # This section contains configuration options used when executing tests
 # against the OpenStack Compute API.
@@ -119,6 +123,10 @@
 # Number of seconds to wait to authenticate to an instance
 ssh_timeout = 300
 
+# Additinal wait time for clean state, when there is
+# no OS-EXT-STS extension availiable
+ready_wait = 0
+
 # Number of seconds to wait for output from ssh channel
 ssh_channel_timeout = 60
 
@@ -130,6 +138,11 @@
 # this value as "compute"
 catalog_type = compute
 
+# The name of a region for compute. If empty or commented-out, the value of
+# identity.region is used instead. If no such region is found in the service
+# catalog, the first found one is used.
+#region = RegionOne
+
 # Does the Compute API support creation of images?
 create_image_enabled = true
 
@@ -179,6 +192,11 @@
 # this value as "image"
 catalog_type = image
 
+# The name of a region for image. If empty or commented-out, the value of
+# identity.region is used instead. If no such region is found in the service
+# catalog, the first found one is used.
+#region = RegionOne
+
 # The version of the OpenStack Images API to use
 api_version = 1
 
@@ -194,6 +212,11 @@
 # Catalog type of the Neutron Service
 catalog_type = network
 
+# The name of a region for network. If empty or commented-out, the value of
+# identity.region is used instead. If no such region is found in the service
+# catalog, the first found one is used.
+#region = RegionOne
+
 # A large private cidr block from which to allocate smaller blocks for
 # tenant networks.
 tenant_network_cidr = 10.100.0.0/16
@@ -223,6 +246,12 @@
 # Unless you have a custom Keystone service catalog implementation, you
 # probably want to leave this value as "volume"
 catalog_type = volume
+# The name of a region for volume. If empty or commented-out, the value of
+# identity.region is used instead. If no such region is found in the service
+# catalog, the first found one is used.
+#region = RegionOne
+# The disk format to use when copying a volume to image
+disk_format = raw
 # Number of seconds to wait while looping to check the status of a
 # volume that is being made available
 build_interval = 10
@@ -251,6 +280,11 @@
 # this value as "object-store"
 catalog_type = object-store
 
+# The name of a region for object storage. If empty or commented-out, the
+# value of identity.region is used instead. If no such region is found in
+# the service catalog, the first found one is used.
+#region = RegionOne
+
 # Number of seconds to time on waiting for a container to container
 # synchronization complete
 container_sync_timeout = 120
@@ -309,6 +343,16 @@
 build_interval = 1
 
 [orchestration]
+# The type of endpoint for an Orchestration API service. Unless you have a
+# custom Keystone service catalog implementation, you probably want to leave
+# this value as "orchestration"
+catalog_type = orchestration
+
+# The name of a region for orchestration. If empty or commented-out, the value
+# of identity.region is used instead. If no such region is found in the service
+# catalog, the first found one is used.
+#region = RegionOne
+
 # Status change wait interval
 build_interval = 1
 
@@ -386,3 +430,7 @@
 log_check_interval = 60
 # The default number of threads created while stress test
 default_thread_number_per_action=4
+
+[debug]
+# Enable diagnostic commands
+enable = True
diff --git a/requirements.txt b/requirements.txt
index ab48ec5..b15fb92 100644
--- a/requirements.txt
+++ b/requirements.txt
@@ -19,3 +19,6 @@
 testrepository>=0.0.17
 oslo.config>=1.1.0
 eventlet>=0.13.0
+six<1.4.0
+iso8601>=0.1.4
+fixtures>=0.3.14
diff --git a/tempest/api/README.rst b/tempest/api/README.rst
index 9d8dc10..9eac19d 100644
--- a/tempest/api/README.rst
+++ b/tempest/api/README.rst
@@ -1,5 +1,5 @@
-Tempest Guide to API tests
-==========================
+Tempest Field Guide to API tests
+================================
 
 
 What are these tests?
diff --git a/tempest/api/compute/admin/test_aggregates.py b/tempest/api/compute/admin/test_aggregates.py
index 0bb0460..a5dceca 100644
--- a/tempest/api/compute/admin/test_aggregates.py
+++ b/tempest/api/compute/admin/test_aggregates.py
@@ -61,12 +61,12 @@
         # Create and delete an aggregate.
         aggregate_name = rand_name(self.aggregate_name_prefix)
         resp, aggregate = self.client.create_aggregate(aggregate_name)
-        self.assertEquals(200, resp.status)
-        self.assertEquals(aggregate_name, aggregate['name'])
-        self.assertEquals(None, aggregate['availability_zone'])
+        self.assertEqual(200, resp.status)
+        self.assertEqual(aggregate_name, aggregate['name'])
+        self.assertEqual(None, aggregate['availability_zone'])
 
         resp, _ = self.client.delete_aggregate(aggregate['id'])
-        self.assertEquals(200, resp.status)
+        self.assertEqual(200, resp.status)
         self.client.wait_for_resource_deletion(aggregate['id'])
 
     @attr(type='gate')
@@ -75,12 +75,12 @@
         aggregate_name = rand_name(self.aggregate_name_prefix)
         az_name = rand_name(self.az_name_prefix)
         resp, aggregate = self.client.create_aggregate(aggregate_name, az_name)
-        self.assertEquals(200, resp.status)
-        self.assertEquals(aggregate_name, aggregate['name'])
-        self.assertEquals(az_name, aggregate['availability_zone'])
+        self.assertEqual(200, resp.status)
+        self.assertEqual(aggregate_name, aggregate['name'])
+        self.assertEqual(az_name, aggregate['availability_zone'])
 
         resp, _ = self.client.delete_aggregate(aggregate['id'])
-        self.assertEquals(200, resp.status)
+        self.assertEqual(200, resp.status)
         self.client.wait_for_resource_deletion(aggregate['id'])
 
     @attr(type='gate')
@@ -91,7 +91,7 @@
         self.addCleanup(self.client.delete_aggregate, aggregate['id'])
 
         resp, aggregates = self.client.list_aggregates()
-        self.assertEquals(200, resp.status)
+        self.assertEqual(200, resp.status)
         self.assertIn((aggregate['id'], aggregate['availability_zone']),
                       map(lambda x: (x['id'], x['availability_zone']),
                           aggregates))
@@ -104,10 +104,10 @@
         self.addCleanup(self.client.delete_aggregate, aggregate['id'])
 
         resp, body = self.client.get_aggregate(aggregate['id'])
-        self.assertEquals(200, resp.status)
-        self.assertEquals(aggregate['name'], body['name'])
-        self.assertEquals(aggregate['availability_zone'],
-                          body['availability_zone'])
+        self.assertEqual(200, resp.status)
+        self.assertEqual(aggregate['name'], body['name'])
+        self.assertEqual(aggregate['availability_zone'],
+                         body['availability_zone'])
 
     @attr(type=['negative', 'gate'])
     def test_aggregate_create_as_user(self):
@@ -166,17 +166,17 @@
         self.addCleanup(self.client.delete_aggregate, aggregate['id'])
 
         resp, body = self.client.add_host(aggregate['id'], self.host)
-        self.assertEquals(200, resp.status)
-        self.assertEquals(aggregate_name, body['name'])
-        self.assertEquals(aggregate['availability_zone'],
-                          body['availability_zone'])
+        self.assertEqual(200, resp.status)
+        self.assertEqual(aggregate_name, body['name'])
+        self.assertEqual(aggregate['availability_zone'],
+                         body['availability_zone'])
         self.assertIn(self.host, body['hosts'])
 
         resp, body = self.client.remove_host(aggregate['id'], self.host)
-        self.assertEquals(200, resp.status)
-        self.assertEquals(aggregate_name, body['name'])
-        self.assertEquals(aggregate['availability_zone'],
-                          body['availability_zone'])
+        self.assertEqual(200, resp.status)
+        self.assertEqual(aggregate_name, body['name'])
+        self.assertEqual(aggregate['availability_zone'],
+                         body['availability_zone'])
         self.assertNotIn(self.host, body['hosts'])
 
     @attr(type='gate')
@@ -191,10 +191,10 @@
 
         resp, aggregates = self.client.list_aggregates()
         aggs = filter(lambda x: x['id'] == aggregate['id'], aggregates)
-        self.assertEquals(1, len(aggs))
+        self.assertEqual(1, len(aggs))
         agg = aggs[0]
-        self.assertEquals(aggregate_name, agg['name'])
-        self.assertEquals(None, agg['availability_zone'])
+        self.assertEqual(aggregate_name, agg['name'])
+        self.assertEqual(None, agg['availability_zone'])
         self.assertIn(self.host, agg['hosts'])
 
     @attr(type='gate')
@@ -208,8 +208,8 @@
         self.addCleanup(self.client.remove_host, aggregate['id'], self.host)
 
         resp, body = self.client.get_aggregate(aggregate['id'])
-        self.assertEquals(aggregate_name, body['name'])
-        self.assertEquals(None, body['availability_zone'])
+        self.assertEqual(aggregate_name, body['name'])
+        self.assertEqual(None, body['availability_zone'])
         self.assertIn(self.host, body['hosts'])
 
     @attr(type='gate')
diff --git a/tempest/api/compute/admin/test_availability_zone.py b/tempest/api/compute/admin/test_availability_zone.py
index 8a56b89..d1e1be6 100644
--- a/tempest/api/compute/admin/test_availability_zone.py
+++ b/tempest/api/compute/admin/test_availability_zone.py
@@ -51,7 +51,7 @@
 
     @attr(type='gate')
     def test_get_availability_zone_list_with_non_admin_user(self):
-        # List of availability zone with non admin user
+        # List of availability zone with non-administrator user
         resp, availability_zone = \
             self.non_adm_client.get_availability_zone_list()
         self.assertEqual(200, resp.status)
@@ -59,7 +59,8 @@
 
     @attr(type=['negative', 'gate'])
     def test_get_availability_zone_list_detail_with_non_admin_user(self):
-        # List of availability zones and available services with non admin user
+        # List of availability zones and available services with
+        # non-administrator user
         self.assertRaises(
             exceptions.Unauthorized,
             self.non_adm_client.get_availability_zone_list_detail)
diff --git a/tempest/api/compute/admin/test_fixed_ips.py b/tempest/api/compute/admin/test_fixed_ips.py
index 895f773..85b03e6 100644
--- a/tempest/api/compute/admin/test_fixed_ips.py
+++ b/tempest/api/compute/admin/test_fixed_ips.py
@@ -21,42 +21,29 @@
 from tempest.test import attr
 
 
-class FixedIPsBase(base.BaseComputeAdminTest):
-    _interface = 'json'
-    ip = None
-
-    @classmethod
-    def setUpClass(cls):
-        super(FixedIPsBase, cls).setUpClass()
-        if cls.config.service_available.neutron:
-            msg = ("%s skipped as neutron is available" % cls.__name__)
-            raise cls.skipException(msg)
-        # NOTE(maurosr): The idea here is: the server creation is just an
-        # auxiliary element to the ip details or reservation, there was no way
-        # (at least none in my mind) to get an valid and existing ip except
-        # by creating a server and using its ip. So the intention is to create
-        # fewer server possible (one) and use it to both: json and xml tests.
-        # This decreased time to run both tests, in my test machine, from 53
-        # secs to 29 (agains 23 secs when running only json tests)
-        if cls.ip is None:
-            cls.client = cls.os_adm.fixed_ips_client
-            cls.non_admin_client = cls.fixed_ips_client
-            resp, server = cls.create_server(wait_until='ACTIVE')
-            resp, server = cls.servers_client.get_server(server['id'])
-            for ip_set in server['addresses']:
-                for ip in server['addresses'][ip_set]:
-                    if ip['OS-EXT-IPS:type'] == 'fixed':
-                        cls.ip = ip['addr']
-                        break
-                if cls.ip:
-                    break
-
-
-class FixedIPsTestJson(FixedIPsBase):
+class FixedIPsTestJson(base.BaseComputeAdminTest):
     _interface = 'json'
 
     CONF = config.TempestConfig()
 
+    @classmethod
+    def setUpClass(cls):
+        super(FixedIPsTestJson, cls).setUpClass()
+        if cls.config.service_available.neutron:
+            msg = ("%s skipped as neutron is available" % cls.__name__)
+            raise cls.skipException(msg)
+        cls.client = cls.os_adm.fixed_ips_client
+        cls.non_admin_client = cls.fixed_ips_client
+        resp, server = cls.create_server(wait_until='ACTIVE')
+        resp, server = cls.servers_client.get_server(server['id'])
+        for ip_set in server['addresses']:
+            for ip in server['addresses'][ip_set]:
+                if ip['OS-EXT-IPS:type'] == 'fixed':
+                    cls.ip = ip['addr']
+                    break
+            if cls.ip:
+                break
+
     @attr(type='gate')
     def test_list_fixed_ip_details(self):
         resp, fixed_ip = self.client.get_fixed_ip_details(self.ip)
diff --git a/tempest/api/compute/admin/test_flavors.py b/tempest/api/compute/admin/test_flavors.py
index 7efd3c1..b693227 100644
--- a/tempest/api/compute/admin/test_flavors.py
+++ b/tempest/api/compute/admin/test_flavors.py
@@ -136,8 +136,8 @@
         # Delete the flavor
         new_flavor_id = flavor['id']
         resp_delete, body = self.client.delete_flavor(new_flavor_id)
-        self.assertEquals(200, resp.status)
-        self.assertEquals(202, resp_delete.status)
+        self.assertEqual(200, resp.status)
+        self.assertEqual(202, resp_delete.status)
 
         # Deleted flavors can be seen via detailed GET
         resp, flavor = self.client.get_flavor_details(new_flavor_id)
@@ -230,6 +230,26 @@
         self.assertFalse(flag)
 
     @attr(type='gate')
+    def test_create_server_with_non_public_flavor(self):
+        # Create a flavor with os-flavor-access:is_public false
+        flavor_name = rand_name(self.flavor_name_prefix)
+        new_flavor_id = rand_int_id(start=1000)
+
+        # Create the flavor
+        resp, flavor = self.client.create_flavor(flavor_name,
+                                                 self.ram, self.vcpus,
+                                                 self.disk,
+                                                 new_flavor_id,
+                                                 is_public="False")
+        self.addCleanup(self.flavor_clean_up, flavor['id'])
+        self.assertEqual(200, resp.status)
+
+        # Verify flavor is not used by other user
+        self.assertRaises(exceptions.BadRequest,
+                          self.os.servers_client.create_server,
+                          'test', self.image_ref, flavor['id'])
+
+    @attr(type='gate')
     def test_list_public_flavor_with_other_user(self):
         # Create a Flavor with public access.
         # Try to List/Get flavor with another user
diff --git a/tempest/api/compute/admin/test_flavors_extra_specs.py b/tempest/api/compute/admin/test_flavors_extra_specs.py
index ace77a6..e1e75cb 100644
--- a/tempest/api/compute/admin/test_flavors_extra_specs.py
+++ b/tempest/api/compute/admin/test_flavors_extra_specs.py
@@ -102,7 +102,7 @@
             self.flavor['id'])
         self.assertEqual(resp.status, 200)
         for key in specs:
-            self.assertEquals(body[key], specs[key])
+            self.assertEqual(body[key], specs[key])
 
     @attr(type=['negative', 'gate'])
     def test_flavor_non_admin_unset_keys(self):
diff --git a/tempest/api/compute/flavors/test_flavors.py b/tempest/api/compute/flavors/test_flavors.py
index 51ce20c..c3ba671 100644
--- a/tempest/api/compute/flavors/test_flavors.py
+++ b/tempest/api/compute/flavors/test_flavors.py
@@ -52,7 +52,7 @@
 
     @attr(type=['negative', 'gate'])
     def test_get_non_existant_flavor(self):
-        # flavor details are not returned for non existant flavors
+        # flavor details are not returned for non-existent flavors
         self.assertRaises(exceptions.NotFound, self.client.get_flavor_details,
                           999)
 
@@ -150,7 +150,7 @@
 
     @attr(type=['negative', 'gate'])
     def test_get_flavor_details_for_invalid_flavor_id(self):
-        # Ensure 404 returned for non-existant flavor ID
+        # Ensure 404 returned for non-existent flavor ID
         self.assertRaises(exceptions.NotFound, self.client.get_flavor_details,
                           9999)
 
diff --git a/tempest/api/compute/floating_ips/test_list_floating_ips.py b/tempest/api/compute/floating_ips/test_list_floating_ips.py
index e380334..f5baa3c 100644
--- a/tempest/api/compute/floating_ips/test_list_floating_ips.py
+++ b/tempest/api/compute/floating_ips/test_list_floating_ips.py
@@ -80,12 +80,12 @@
     @attr(type=['negative', 'gate'])
     def test_get_nonexistant_floating_ip_details(self):
         # Negative test:Should not be able to GET the details
-        # of nonexistant floating IP
+        # of non-existent floating IP
         floating_ip_id = []
         resp, body = self.client.list_floating_ips()
         for i in range(len(body)):
             floating_ip_id.append(body[i]['id'])
-        # Creating a nonexistant floatingIP id
+        # Creating a non-existent floatingIP id
         while True:
             non_exist_id = rand_name('999')
             if non_exist_id not in floating_ip_id:
diff --git a/tempest/api/compute/images/test_image_metadata.py b/tempest/api/compute/images/test_image_metadata.py
index 52239cd..a769744 100644
--- a/tempest/api/compute/images/test_image_metadata.py
+++ b/tempest/api/compute/images/test_image_metadata.py
@@ -120,20 +120,20 @@
 
     @attr(type=['negative', 'gate'])
     def test_update_nonexistant_image_metadata(self):
-        # Negative test:An update should not happen for a nonexistant image
+        # Negative test:An update should not happen for a non-existent image
         meta = {'key1': 'alt1', 'key2': 'alt2'}
         self.assertRaises(exceptions.NotFound,
                           self.client.update_image_metadata, 999, meta)
 
     @attr(type=['negative', 'gate'])
     def test_get_nonexistant_image_metadata_item(self):
-        # Negative test: Get on nonexistant image should not happen
+        # Negative test: Get on non-existent image should not happen
         self.assertRaises(exceptions.NotFound,
                           self.client.get_image_metadata_item, 999, 'key2')
 
     @attr(type=['negative', 'gate'])
     def test_set_nonexistant_image_metadata(self):
-        # Negative test: Metadata should not be set to a nonexistant image
+        # Negative test: Metadata should not be set to a non-existent image
         meta = {'key1': 'alt1', 'key2': 'alt2'}
         self.assertRaises(exceptions.NotFound, self.client.set_image_metadata,
                           999, meta)
@@ -149,8 +149,8 @@
 
     @attr(type=['negative', 'gate'])
     def test_delete_nonexistant_image_metadata_item(self):
-        # Negative test: Shouldnt be able to delete metadata
-        # item from nonexistant image
+        # Negative test: Shouldn't be able to delete metadata
+        # item from non-existent image
         self.assertRaises(exceptions.NotFound,
                           self.client.delete_image_metadata_item, 999, 'key1')
 
diff --git a/tempest/api/compute/images/test_images.py b/tempest/api/compute/images/test_images.py
index 2f0ed6b..97fbd8b 100644
--- a/tempest/api/compute/images/test_images.py
+++ b/tempest/api/compute/images/test_images.py
@@ -166,7 +166,7 @@
     def test_delete_image_id_is_over_35_character_limit(self):
         # Return an error while trying to delete image with id over limit
         self.assertRaises(exceptions.NotFound, self.client.delete_image,
-                          '11a22b9-120q-5555-cc11-00ab112223gj-3fac')
+                          '11a22b9-12a9-5555-cc11-00ab112223fa-3fac')
 
 
 class ImagesTestXML(ImagesTestJSON):
diff --git a/tempest/api/compute/images/test_list_image_filters.py b/tempest/api/compute/images/test_list_image_filters.py
index a80f456..e700278 100644
--- a/tempest/api/compute/images/test_list_image_filters.py
+++ b/tempest/api/compute/images/test_list_image_filters.py
@@ -230,7 +230,7 @@
 
     @attr(type=['negative', 'gate'])
     def test_get_nonexistant_image(self):
-        # Negative test: GET on non existant image should fail
+        # Negative test: GET on non-existent image should fail
         self.assertRaises(exceptions.NotFound, self.client.get_image, 999)
 
 
diff --git a/tempest/api/compute/keypairs/test_keypairs.py b/tempest/api/compute/keypairs/test_keypairs.py
index 083fbd7..78c547a 100644
--- a/tempest/api/compute/keypairs/test_keypairs.py
+++ b/tempest/api/compute/keypairs/test_keypairs.py
@@ -157,7 +157,7 @@
         k_name = rand_name('keypair-')
         resp, _ = self.client.create_keypair(k_name)
         self.assertEqual(200, resp.status)
-        # Now try the same keyname to ceate another key
+        # Now try the same keyname to create another key
         self.assertRaises(exceptions.Duplicate, self.client.create_keypair,
                           k_name)
         resp, _ = self.client.delete_keypair(k_name)
diff --git a/tempest/api/compute/security_groups/test_security_group_rules.py b/tempest/api/compute/security_groups/test_security_group_rules.py
index 472b8b4..6071e54 100644
--- a/tempest/api/compute/security_groups/test_security_group_rules.py
+++ b/tempest/api/compute/security_groups/test_security_group_rules.py
@@ -35,7 +35,7 @@
     @attr(type='gate')
     def test_security_group_rules_create(self):
         # Positive test: Creation of Security Group rule
-        # should be successfull
+        # should be successful
         # Creating a Security Group to add rules to it
         s_name = rand_name('securitygroup-')
         s_description = rand_name('description-')
@@ -59,7 +59,7 @@
     def test_security_group_rules_create_with_optional_arguments(self):
         # Positive test: Creation of Security Group rule
         # with optional arguments
-        # should be successfull
+        # should be successful
 
         secgroup1 = None
         secgroup2 = None
diff --git a/tempest/api/compute/security_groups/test_security_groups.py b/tempest/api/compute/security_groups/test_security_groups.py
index 30db206..3e459a2 100644
--- a/tempest/api/compute/security_groups/test_security_groups.py
+++ b/tempest/api/compute/security_groups/test_security_groups.py
@@ -112,12 +112,12 @@
     @attr(type=['negative', 'gate'])
     def test_security_group_get_nonexistant_group(self):
         # Negative test:Should not be able to GET the details
-        # of nonexistant Security Group
+        # of non-existent Security Group
         security_group_id = []
         resp, body = self.client.list_security_groups()
         for i in range(len(body)):
             security_group_id.append(body[i]['id'])
-        # Creating a nonexistant Security Group id
+        # Creating a non-existent Security Group id
         while True:
             non_exist_id = rand_name('999')
             if non_exist_id not in security_group_id:
@@ -201,12 +201,12 @@
                       "Skipped until the Bug #1182384 is resolved")
     @attr(type=['negative', 'gate'])
     def test_delete_nonexistant_security_group(self):
-        # Negative test:Deletion of a nonexistant Security Group should Fail
+        # Negative test:Deletion of a non-existent Security Group should Fail
         security_group_id = []
         resp, body = self.client.list_security_groups()
         for i in range(len(body)):
             security_group_id.append(body[i]['id'])
-        # Creating Non Existant Security Group
+        # Creating non-existent Security Group
         while True:
             non_exist_id = rand_name('999')
             if non_exist_id not in security_group_id:
diff --git a/tempest/api/compute/servers/test_server_metadata.py b/tempest/api/compute/servers/test_server_metadata.py
index 45de0d6..9997b97 100644
--- a/tempest/api/compute/servers/test_server_metadata.py
+++ b/tempest/api/compute/servers/test_server_metadata.py
@@ -115,7 +115,7 @@
 
     @attr(type='gate')
     def test_get_server_metadata_item(self):
-        # The value for a specic metadata key should be returned
+        # The value for a specific metadata key should be returned
         resp, meta = self.client.get_server_metadata_item(self.server_id,
                                                           'key2')
         self.assertTrue('value2', meta['key2'])
@@ -148,13 +148,13 @@
 
     @attr(type=['negative', 'gate'])
     def test_get_nonexistant_server_metadata_item(self):
-        # Negative test: GET on nonexistant server should not succeed
+        # Negative test: GET on a non-existent server should not succeed
         self.assertRaises(exceptions.NotFound,
                           self.client.get_server_metadata_item, 999, 'test2')
 
     @attr(type=['negative', 'gate'])
     def test_list_nonexistant_server_metadata(self):
-        # Negative test:List metadata on a non existant server should
+        # Negative test:List metadata on a non-existent server should
         # not succeed
         self.assertRaises(exceptions.NotFound,
                           self.client.list_server_metadata, 999)
@@ -171,7 +171,7 @@
 
     @attr(type=['negative', 'gate'])
     def test_set_nonexistant_server_metadata(self):
-        # Negative test: Set metadata on a non existant server should not
+        # Negative test: Set metadata on a non-existent server should not
         # succeed
         meta = {'meta1': 'data1'}
         self.assertRaises(exceptions.NotFound,
@@ -179,7 +179,7 @@
 
     @attr(type=['negative', 'gate'])
     def test_update_nonexistant_server_metadata(self):
-        # Negative test: An update should not happen for a nonexistant image
+        # Negative test: An update should not happen for a non-existent image
         meta = {'key1': 'value1', 'key2': 'value2'}
         self.assertRaises(exceptions.NotFound,
                           self.client.update_server_metadata, 999, meta)
@@ -195,7 +195,7 @@
     @attr(type=['negative', 'gate'])
     def test_delete_nonexistant_server_metadata_item(self):
         # Negative test: Should not be able to delete metadata item from a
-        #  nonexistant server
+        #  non-existent server
 
         # Delete the metadata item
         self.assertRaises(exceptions.NotFound,
diff --git a/tempest/api/compute/servers/test_servers.py b/tempest/api/compute/servers/test_servers.py
index 3ff2538..1dff806 100644
--- a/tempest/api/compute/servers/test_servers.py
+++ b/tempest/api/compute/servers/test_servers.py
@@ -81,7 +81,7 @@
         # Update the server with a new name
         resp, server = self.client.update_server(server['id'],
                                                  name='newname')
-        self.assertEquals(200, resp.status)
+        self.assertEqual(200, resp.status)
         self.client.wait_for_server_status(server['id'], 'ACTIVE')
 
         # Verify the name of the server has changed
diff --git a/tempest/api/compute/servers/test_servers_negative.py b/tempest/api/compute/servers/test_servers_negative.py
index e09a23f..226c40e 100644
--- a/tempest/api/compute/servers/test_servers_negative.py
+++ b/tempest/api/compute/servers/test_servers_negative.py
@@ -154,7 +154,7 @@
 
     @attr(type=['negative', 'gate'])
     def test_create_with_non_existant_keypair(self):
-        # Pass a non existant keypair while creating a server
+        # Pass a non-existent keypair while creating a server
 
         key_name = rand_name('key')
         self.assertRaises(exceptions.BadRequest,
diff --git a/tempest/api/compute/test_live_block_migration.py b/tempest/api/compute/test_live_block_migration.py
index 84fd653..7c60859 100644
--- a/tempest/api/compute/test_live_block_migration.py
+++ b/tempest/api/compute/test_live_block_migration.py
@@ -110,7 +110,7 @@
         target_host = self._get_host_other_than(actual_host)
         self._migrate_server_to(server_id, target_host)
         self.servers_client.wait_for_server_status(server_id, 'ACTIVE')
-        self.assertEquals(target_host, self._get_host_for_server(server_id))
+        self.assertEqual(target_host, self._get_host_for_server(server_id))
 
     @testtools.skipIf(not CONF.compute.live_migration_available,
                       'Live migration not available')
@@ -122,7 +122,7 @@
 
         self.assertRaises(exceptions.BadRequest, self._migrate_server_to,
                           server_id, target_host)
-        self.assertEquals('ACTIVE', self._get_server_status(server_id))
+        self.assertEqual('ACTIVE', self._get_server_status(server_id))
 
     @testtools.skipIf(not CONF.compute.live_migration_available or
                       not CONF.compute.use_block_migration_for_live_migration,
@@ -153,7 +153,7 @@
 
         self._migrate_server_to(server_id, target_host)
         self.servers_client.wait_for_server_status(server_id, 'ACTIVE')
-        self.assertEquals(target_host, self._get_host_for_server(server_id))
+        self.assertEqual(target_host, self._get_host_for_server(server_id))
 
     @classmethod
     def tearDownClass(cls):
diff --git a/tempest/api/identity/admin/test_roles.py b/tempest/api/identity/admin/test_roles.py
index cc112cc..c234efd 100644
--- a/tempest/api/identity/admin/test_roles.py
+++ b/tempest/api/identity/admin/test_roles.py
@@ -56,7 +56,7 @@
 
     @attr(type='gate')
     def test_list_roles_by_unauthorized_user(self):
-        # Non admin user should not be able to list roles
+        # Non-administrator user should not be able to list roles
         self.assertRaises(exceptions.Unauthorized,
                           self.non_admin_client.list_roles)
 
@@ -116,7 +116,8 @@
 
     @attr(type='gate')
     def test_assign_user_role_by_unauthorized_user(self):
-        # Non admin user should not be authorized to assign a role to user
+        # Non-administrator user should not be authorized to
+        # assign a role to user
         (user, tenant, role) = self._get_role_params()
         self.assertRaises(exceptions.Unauthorized,
                           self.non_admin_client.assign_user_role,
@@ -170,11 +171,12 @@
                                                        user['id'], role['id'])
         resp, body = self.client.remove_user_role(tenant['id'], user['id'],
                                                   user_role['id'])
-        self.assertEquals(resp['status'], '204')
+        self.assertEqual(resp['status'], '204')
 
     @attr(type='gate')
     def test_remove_user_role_by_unauthorized_user(self):
-        # Non admin user should not be authorized to remove a user's role
+        # Non-administrator user should not be authorized to
+        # remove a user's role
         (user, tenant, role) = self._get_role_params()
         resp, user_role = self.client.assign_user_role(tenant['id'],
                                                        user['id'],
@@ -237,7 +239,8 @@
 
     @attr(type='gate')
     def test_list_user_roles_by_unauthorized_user(self):
-        # Non admin user should not be authorized to list a user's roles
+        # Non-administrator user should not be authorized to list
+        # a user's roles
         (user, tenant, role) = self._get_role_params()
         self.client.assign_user_role(tenant['id'], user['id'], role['id'])
         self.assertRaises(exceptions.Unauthorized,
diff --git a/tempest/api/identity/admin/test_services.py b/tempest/api/identity/admin/test_services.py
index 2be0c29..508c177 100644
--- a/tempest/api/identity/admin/test_services.py
+++ b/tempest/api/identity/admin/test_services.py
@@ -50,7 +50,7 @@
             self.assertTrue(resp['status'].startswith('2'))
             # verifying the existence of service created
             self.assertIn('id', fetched_service)
-            self.assertEquals(fetched_service['id'], service_data['id'])
+            self.assertEqual(fetched_service['id'], service_data['id'])
             self.assertIn('name', fetched_service)
             self.assertEqual(fetched_service['name'], service_data['name'])
             self.assertIn('type', fetched_service)
diff --git a/tempest/api/identity/admin/test_tenants.py b/tempest/api/identity/admin/test_tenants.py
index e8625db..a61a115 100644
--- a/tempest/api/identity/admin/test_tenants.py
+++ b/tempest/api/identity/admin/test_tenants.py
@@ -26,7 +26,7 @@
 
     @attr(type='gate')
     def test_list_tenants_by_unauthorized_user(self):
-        # Non-admin user should not be able to list tenants
+        # Non-administrator user should not be able to list tenants
         self.assertRaises(exceptions.Unauthorized,
                           self.non_admin_client.list_tenants)
 
@@ -63,7 +63,7 @@
 
     @attr(type='gate')
     def test_tenant_delete_by_unauthorized_user(self):
-        # Non-admin user should not be able to delete a tenant
+        # Non-administrator user should not be able to delete a tenant
         tenant_name = rand_name('tenant-')
         resp, tenant = self.client.create_tenant(tenant_name)
         self.data.tenants.append(tenant)
@@ -164,7 +164,7 @@
 
     @attr(type='gate')
     def test_create_tenant_by_unauthorized_user(self):
-        # Non-admin user should not be authorized to create a tenant
+        # Non-administrator user should not be authorized to create a tenant
         tenant_name = rand_name('tenant-')
         self.assertRaises(exceptions.Unauthorized,
                           self.non_admin_client.create_tenant, tenant_name)
diff --git a/tempest/api/identity/admin/test_users.py b/tempest/api/identity/admin/test_users.py
index c3abc46..dc17e90 100644
--- a/tempest/api/identity/admin/test_users.py
+++ b/tempest/api/identity/admin/test_users.py
@@ -48,7 +48,7 @@
 
     @attr(type=['negative', 'gate'])
     def test_create_user_by_unauthorized_user(self):
-        # Non-admin should not be authorized to create a user
+        # Non-administrator should not be authorized to create a user
         self.data.setup_test_tenant()
         self.assertRaises(exceptions.Unauthorized,
                           self.non_admin_client.create_user, self.alt_user,
@@ -137,13 +137,13 @@
         resp, user = self.client.create_user(test_user, self.alt_password,
                                              self.data.tenant['id'],
                                              self.alt_email)
-        self.assertEquals('200', resp['status'])
+        self.assertEqual('200', resp['status'])
         resp, body = self.client.delete_user(user['id'])
-        self.assertEquals('204', resp['status'])
+        self.assertEqual('204', resp['status'])
 
     @attr(type=['negative', 'gate'])
     def test_delete_users_by_unauthorized_user(self):
-        # Non admin user should not be authorized to delete a user
+        # Non-administrator user should not be authorized to delete a user
         self.data.setup_test_user()
         self.assertRaises(exceptions.Unauthorized,
                           self.non_admin_client.delete_user,
@@ -241,7 +241,7 @@
 
     @attr(type=['negative', 'gate'])
     def test_get_users_by_unauthorized_user(self):
-        # Non admin user should not be authorized to get user list
+        # Non-administrator user should not be authorized to get user list
         self.data.setup_test_user()
         self.assertRaises(exceptions.Unauthorized,
                           self.non_admin_client.get_users)
@@ -264,7 +264,7 @@
         resp, user1 = self.client.create_user(alt_tenant_user1, 'password1',
                                               self.data.tenant['id'],
                                               'user1@123')
-        self.assertEquals('200', resp['status'])
+        self.assertEqual('200', resp['status'])
         user_ids.append(user1['id'])
         self.data.users.append(user1)
 
@@ -272,7 +272,7 @@
         resp, user2 = self.client.create_user(alt_tenant_user2, 'password2',
                                               self.data.tenant['id'],
                                               'user2@123')
-        self.assertEquals('200', resp['status'])
+        self.assertEqual('200', resp['status'])
         user_ids.append(user2['id'])
         self.data.users.append(user2)
         # List of users for the respective tenant ID
@@ -301,22 +301,22 @@
         user_ids.append(user['id'])
         resp, role = self.client.assign_user_role(tenant['id'], user['id'],
                                                   role['id'])
-        self.assertEquals('200', resp['status'])
+        self.assertEqual('200', resp['status'])
 
         alt_user2 = rand_name('second_user_')
         resp, second_user = self.client.create_user(alt_user2, 'password1',
                                                     self.data.tenant['id'],
                                                     'user2@123')
-        self.assertEquals('200', resp['status'])
+        self.assertEqual('200', resp['status'])
         user_ids.append(second_user['id'])
         self.data.users.append(second_user)
         resp, role = self.client.assign_user_role(tenant['id'],
                                                   second_user['id'],
                                                   role['id'])
-        self.assertEquals('200', resp['status'])
+        self.assertEqual('200', resp['status'])
         # List of users with roles for the respective tenant ID
         resp, body = self.client.list_users_for_tenant(self.data.tenant['id'])
-        self.assertEquals('200', resp['status'])
+        self.assertEqual('200', resp['status'])
         for i in body:
             fetched_user_ids.append(i['id'])
         # verifying the user Id in the list
@@ -329,7 +329,7 @@
     @attr(type=['negative', 'gate'])
     def test_list_users_with_invalid_tenant(self):
         # Should not be able to return a list of all
-        # users for a nonexistant tenant
+        # users for a non-existent tenant
         # Assign invalid tenant ids
         invalid_id = list()
         invalid_id.append(rand_name('999'))
diff --git a/tempest/api/identity/admin/v3/test_credentials.py b/tempest/api/identity/admin/v3/test_credentials.py
new file mode 100644
index 0000000..cda5863
--- /dev/null
+++ b/tempest/api/identity/admin/v3/test_credentials.py
@@ -0,0 +1,119 @@
+# vim: tabstop=4 shiftwidth=4 softtabstop=4
+
+# Copyright 2013 OpenStack Foundation
+# All Rights Reserved.
+#
+#    Licensed under the Apache License, Version 2.0 (the "License"); you may
+#    not use this file except in compliance with the License. You may obtain
+#    a copy of the License at
+#
+#         http://www.apache.org/licenses/LICENSE-2.0
+#
+#    Unless required by applicable law or agreed to in writing, software
+#    distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+#    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+#    License for the specific language governing permissions and limitations
+#    under the License.
+
+from tempest.api.identity import base
+from tempest.common.utils.data_utils import rand_name
+from tempest.test import attr
+
+
+class CredentialsTestJSON(base.BaseIdentityAdminTest):
+    _interface = 'json'
+
+    @classmethod
+    def setUpClass(cls):
+        super(CredentialsTestJSON, cls).setUpClass()
+        cls.projects = list()
+        cls.creds_list = [['project_id', 'user_id', 'id'],
+                          ['access', 'secret']]
+        u_name = rand_name('user-')
+        u_desc = '%s description' % u_name
+        u_email = '%s@testmail.tm' % u_name
+        u_password = rand_name('pass-')
+        for i in range(2):
+            resp, cls.project = cls.v3_client.create_project(
+                rand_name('project-'), description=rand_name('project-desc-'))
+            assert resp['status'] == '201', "Expected %s" % resp['status']
+            cls.projects.append(cls.project['id'])
+
+        resp, cls.user_body = cls.v3_client.create_user(
+            u_name, description=u_desc, password=u_password,
+            email=u_email, project_id=cls.projects[0])
+        assert resp['status'] == '201', "Expected: %s" % resp['status']
+
+    @classmethod
+    def tearDownClass(cls):
+        resp, _ = cls.v3_client.delete_user(cls.user_body['id'])
+        assert resp['status'] == '204', "Expected: %s" % resp['status']
+        for p in cls.projects:
+            resp, _ = cls.v3_client.delete_project(p)
+            assert resp['status'] == '204', "Expected: %s" % resp['status']
+        super(CredentialsTestJSON, cls).tearDownClass()
+
+    def _delete_credential(self, cred_id):
+        resp, body = self.creds_client.delete_credential(cred_id)
+        self.assertEqual(resp['status'], '204')
+
+    @attr(type='smoke')
+    def test_credentials_create_get_update_delete(self):
+        keys = [rand_name('Access-'), rand_name('Secret-')]
+        resp, cred = self.creds_client.create_credential(
+            keys[0], keys[1], self.user_body['id'],
+            self.projects[0])
+        self.addCleanup(self._delete_credential, cred['id'])
+        self.assertEqual(resp['status'], '201')
+        for value1 in self.creds_list[0]:
+            self.assertIn(value1, cred)
+        for value2 in self.creds_list[1]:
+            self.assertIn(value2, cred['blob'])
+
+        new_keys = [rand_name('NewAccess-'), rand_name('NewSecret-')]
+        resp, update_body = self.creds_client.update_credential(
+            cred['id'], access_key=new_keys[0], secret_key=new_keys[1],
+            project_id=self.projects[1])
+        self.assertEqual(resp['status'], '200')
+        self.assertEqual(cred['id'], update_body['id'])
+        self.assertEqual(self.projects[1], update_body['project_id'])
+        self.assertEqual(self.user_body['id'], update_body['user_id'])
+        self.assertEqual(update_body['blob']['access'], new_keys[0])
+        self.assertEqual(update_body['blob']['secret'], new_keys[1])
+
+        resp, get_body = self.creds_client.get_credential(cred['id'])
+        self.assertEqual(resp['status'], '200')
+        for value1 in self.creds_list[0]:
+            self.assertEqual(update_body[value1],
+                             get_body[value1])
+        for value2 in self.creds_list[1]:
+            self.assertEqual(update_body['blob'][value2],
+                             get_body['blob'][value2])
+
+    @attr(type='smoke')
+    def test_credentials_list_delete(self):
+        created_cred_ids = list()
+        fetched_cred_ids = list()
+
+        for i in range(2):
+            resp, cred = self.creds_client.create_credential(
+                rand_name('Access-'), rand_name('Secret-'),
+                self.user_body['id'], self.projects[0])
+            self.assertEqual(resp['status'], '201')
+            created_cred_ids.append(cred['id'])
+            self.addCleanup(self._delete_credential, cred['id'])
+
+        resp, creds = self.creds_client.list_credentials()
+        self.assertEqual(resp['status'], '200')
+
+        for i in creds:
+            fetched_cred_ids.append(i['id'])
+        missing_creds = [c for c in created_cred_ids
+                         if c not in fetched_cred_ids]
+        self.assertEqual(0, len(missing_creds),
+                         "Failed to find cred %s in fetched list" %
+                         ', '.join(m_cred for m_cred in missing_creds))
+
+
+class CredentialsTestXML(CredentialsTestJSON):
+    _interface = 'xml'
diff --git a/tempest/api/identity/admin/v3/test_domains.py b/tempest/api/identity/admin/v3/test_domains.py
index 9136934..2fbef77 100644
--- a/tempest/api/identity/admin/v3/test_domains.py
+++ b/tempest/api/identity/admin/v3/test_domains.py
@@ -25,7 +25,7 @@
     _interface = 'json'
 
     def _delete_domain(self, domain_id):
-        # It is necessary to disable the domian before deleting,
+        # It is necessary to disable the domain before deleting,
         # or else it would result in unauthorized error
         _, body = self.v3_client.update_domain(domain_id, enabled=False)
         resp, _ = self.v3_client.delete_domain(domain_id)
@@ -39,7 +39,7 @@
         for _ in range(3):
             _, domain = self.v3_client.create_domain(
                 rand_name('domain-'), description=rand_name('domain-desc-'))
-            # Delete the domian at the end of this method
+            # Delete the domain at the end of this method
             self.addCleanup(self._delete_domain, domain['id'])
             domain_ids.append(domain['id'])
         # List and Verify Domains
diff --git a/tempest/api/identity/admin/v3/test_endpoints.py b/tempest/api/identity/admin/v3/test_endpoints.py
index 9d143ed..02a6f5b 100644
--- a/tempest/api/identity/admin/v3/test_endpoints.py
+++ b/tempest/api/identity/admin/v3/test_endpoints.py
@@ -59,7 +59,7 @@
     def test_list_endpoints(self):
         # Get a list of endpoints
         resp, fetched_endpoints = self.client.list_endpoints()
-        # Asserting LIST Endpoint
+        # Asserting LIST endpoints
         self.assertEqual(resp['status'], '200')
         missing_endpoints =\
             [e for e in self.setup_endpoints if e not in fetched_endpoints]
diff --git a/tempest/api/identity/admin/v3/test_roles.py b/tempest/api/identity/admin/v3/test_roles.py
index 980323a..a238c46 100644
--- a/tempest/api/identity/admin/v3/test_roles.py
+++ b/tempest/api/identity/admin/v3/test_roles.py
@@ -54,7 +54,7 @@
         resp[1], _ = cls.v3_client.delete_group(cls.group_body['id'])
         resp[2], _ = cls.v3_client.delete_user(cls.user_body['id'])
         resp[3], _ = cls.v3_client.delete_project(cls.project['id'])
-        # NOTE(harika-vakadi): It is necessary to disable the domian
+        # NOTE(harika-vakadi): It is necessary to disable the domain
         # before deleting,or else it would result in unauthorized error
         cls.v3_client.update_domain(cls.domain['id'], enabled=False)
         resp[4], _ = cls.v3_client.delete_domain(cls.domain['id'])
diff --git a/tempest/api/identity/admin/v3/test_users.py b/tempest/api/identity/admin/v3/test_users.py
index bf7a554..50e9702 100644
--- a/tempest/api/identity/admin/v3/test_users.py
+++ b/tempest/api/identity/admin/v3/test_users.py
@@ -116,7 +116,7 @@
         self.assertEqual(0, len(missing_projects),
                          "Failed to find project %s in fetched list" %
                          ', '.join(m_project for m_project
-                         in missing_projects))
+                                   in missing_projects))
 
 
 class UsersV3TestXML(UsersV3TestJSON):
diff --git a/tempest/api/identity/base.py b/tempest/api/identity/base.py
index bfb5372..2a168de 100644
--- a/tempest/api/identity/base.py
+++ b/tempest/api/identity/base.py
@@ -34,6 +34,7 @@
         cls.service_client = os.service_client
         cls.policy_client = os.policy_client
         cls.v3_token = os.token_v3_client
+        cls.creds_client = os.credentials_client
 
         if not cls.client.has_admin_extensions():
             raise cls.skipException("Admin extensions disabled")
diff --git a/tempest/api/image/v1/test_image_members.py b/tempest/api/image/v1/test_image_members.py
index 29bcaf4..fcbde50 100644
--- a/tempest/api/image/v1/test_image_members.py
+++ b/tempest/api/image/v1/test_image_members.py
@@ -42,7 +42,7 @@
                                         disk_format='raw',
                                         is_public=True,
                                         data=image_file)
-        self.assertEquals(201, resp.status)
+        self.assertEqual(201, resp.status)
         image_id = image['id']
         return image_id
 
@@ -50,9 +50,9 @@
     def test_add_image_member(self):
         image = self._create_image()
         resp = self.client.add_member(self.tenants[0], image)
-        self.assertEquals(204, resp.status)
+        self.assertEqual(204, resp.status)
         resp, body = self.client.get_image_membership(image)
-        self.assertEquals(200, resp.status)
+        self.assertEqual(200, resp.status)
         members = body['members']
         members = map(lambda x: x['member_id'], members)
         self.assertIn(self.tenants[0], members)
@@ -61,12 +61,12 @@
     def test_get_shared_images(self):
         image = self._create_image()
         resp = self.client.add_member(self.tenants[0], image)
-        self.assertEquals(204, resp.status)
+        self.assertEqual(204, resp.status)
         share_image = self._create_image()
         resp = self.client.add_member(self.tenants[0], share_image)
-        self.assertEquals(204, resp.status)
+        self.assertEqual(204, resp.status)
         resp, body = self.client.get_shared_images(self.tenants[0])
-        self.assertEquals(200, resp.status)
+        self.assertEqual(200, resp.status)
         images = body['shared_images']
         images = map(lambda x: x['image_id'], images)
         self.assertIn(share_image, images)
@@ -76,10 +76,10 @@
     def test_remove_member(self):
         image_id = self._create_image()
         resp = self.client.add_member(self.tenants[0], image_id)
-        self.assertEquals(204, resp.status)
+        self.assertEqual(204, resp.status)
         resp = self.client.delete_member(self.tenants[0], image_id)
-        self.assertEquals(204, resp.status)
+        self.assertEqual(204, resp.status)
         resp, body = self.client.get_image_membership(image_id)
-        self.assertEquals(200, resp.status)
+        self.assertEqual(200, resp.status)
         members = body['members']
-        self.assertEquals(0, len(members))
+        self.assertEqual(0, len(members))
diff --git a/tempest/api/network/base.py b/tempest/api/network/base.py
index 19c5f84..4a4bf60 100644
--- a/tempest/api/network/base.py
+++ b/tempest/api/network/base.py
@@ -56,9 +56,21 @@
         cls.networks = []
         cls.subnets = []
         cls.ports = []
+        cls.pools = []
+        cls.vips = []
+        cls.members = []
+        cls.health_monitors = []
 
     @classmethod
     def tearDownClass(cls):
+        for health_monitor in cls.health_monitors:
+            cls.client.delete_health_monitor(health_monitor['id'])
+        for member in cls.members:
+            cls.client.delete_member(member['id'])
+        for vip in cls.vips:
+            cls.client.delete_vip(vip['id'])
+        for pool in cls.pools:
+            cls.client.delete_pool(pool['id'])
         for port in cls.ports:
             cls.client.delete_port(port['id'])
         for subnet in cls.subnets:
@@ -111,3 +123,41 @@
         port = body['port']
         cls.ports.append(port)
         return port
+
+    @classmethod
+    def create_pool(cls, name, lb_method, protocol, subnet):
+        """Wrapper utility that returns a test pool."""
+        resp, body = cls.client.create_pool(name, lb_method, protocol,
+                                            subnet['id'])
+        pool = body['pool']
+        cls.pools.append(pool)
+        return pool
+
+    @classmethod
+    def create_vip(cls, name, protocol, protocol_port, subnet, pool):
+        """Wrapper utility that returns a test vip."""
+        resp, body = cls.client.create_vip(name, protocol, protocol_port,
+                                           subnet['id'], pool['id'])
+        vip = body['vip']
+        cls.vips.append(vip)
+        return vip
+
+    @classmethod
+    def create_member(cls, protocol_port, pool):
+        """Wrapper utility that returns a test member."""
+        resp, body = cls.client.create_member("10.0.9.46",
+                                              protocol_port,
+                                              pool['id'])
+        member = body['member']
+        cls.members.append(member)
+        return member
+
+    @classmethod
+    def create_health_monitor(cls, delay, max_retries, Type, timeout):
+        """Wrapper utility that returns a test health monitor."""
+        resp, body = cls.client.create_health_monitor(delay,
+                                                      max_retries,
+                                                      Type, timeout)
+        health_monitor = body['health_monitor']
+        cls.health_monitors.append(health_monitor)
+        return health_monitor
diff --git a/tempest/api/network/test_load_balancer.py b/tempest/api/network/test_load_balancer.py
new file mode 100644
index 0000000..62017dc
--- /dev/null
+++ b/tempest/api/network/test_load_balancer.py
@@ -0,0 +1,210 @@
+# vim: tabstop=4 shiftwidth=4 softtabstop=4
+
+# Copyright 2013 OpenStack, LLC
+# All Rights Reserved.
+#
+#    Licensed under the Apache License, Version 2.0 (the "License"); you may
+#    not use this file except in compliance with the License. You may obtain
+#    a copy of the License at
+#
+#         http://www.apache.org/licenses/LICENSE-2.0
+#
+#    Unless required by applicable law or agreed to in writing, software
+#    distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+#    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+#    License for the specific language governing permissions and limitations
+#    under the License.
+
+from tempest.api.network import base
+from tempest.common.utils.data_utils import rand_name
+from tempest.test import attr
+
+
+class LoadBalancerJSON(base.BaseNetworkTest):
+    _interface = 'json'
+
+    """
+    Tests the following operations in the Neutron API using the REST client for
+    Neutron:
+
+        create vIP, and Pool
+        show vIP
+        list vIP
+        update vIP
+        delete vIP
+        update pool
+        delete pool
+        show pool
+        list pool
+        health monitoring operations
+    """
+
+    @classmethod
+    def setUpClass(cls):
+        super(LoadBalancerJSON, cls).setUpClass()
+        cls.network = cls.create_network()
+        cls.name = cls.network['name']
+        cls.subnet = cls.create_subnet(cls.network)
+        pool_name = rand_name('pool-')
+        vip_name = rand_name('vip-')
+        cls.pool = cls.create_pool(pool_name, "ROUND_ROBIN",
+                                   "HTTP", cls.subnet)
+        cls.vip = cls.create_vip(vip_name, "HTTP", 80, cls.subnet, cls.pool)
+        cls.member = cls.create_member(80, cls.pool)
+        cls.health_monitor = cls.create_health_monitor(4, 3, "TCP", 1)
+
+    @attr(type='smoke')
+    def test_list_vips(self):
+        # Verify the vIP exists in the list of all vIPs
+        resp, body = self.client.list_vips()
+        self.assertEqual('200', resp['status'])
+        vips = body['vips']
+        found = None
+        for n in vips:
+            if (n['id'] == self.vip['id']):
+                found = n['id']
+        msg = "vIPs list doesn't contain created vip"
+        self.assertIsNotNone(found, msg)
+
+    def test_create_update_delete_pool_vip(self):
+        # Creates a vip
+        name = rand_name('vip-')
+        resp, body = self.client.create_pool(rand_name("pool-"),
+                                             "ROUND_ROBIN", "HTTP",
+                                             self.subnet['id'])
+        pool = body['pool']
+        resp, body = self.client.create_vip(name, "HTTP", 80,
+                                            self.subnet['id'], pool['id'])
+        self.assertEqual('201', resp['status'])
+        vip = body['vip']
+        vip_id = vip['id']
+        # Verification of vip update
+        new_name = "New_vip"
+        resp, body = self.client.update_vip(vip_id, new_name)
+        self.assertEqual('200', resp['status'])
+        updated_vip = body['vip']
+        self.assertEqual(updated_vip['name'], new_name)
+        # Verification of vip delete
+        resp, body = self.client.delete_vip(vip['id'])
+        self.assertEqual('204', resp['status'])
+        # Verification of pool update
+        new_name = "New_pool"
+        resp, body = self.client.update_pool(pool['id'], new_name)
+        self.assertEqual('200', resp['status'])
+        updated_pool = body['pool']
+        self.assertEqual(updated_pool['name'], new_name)
+        # Verification of pool delete
+        resp, body = self.client.delete_pool(pool['id'])
+        self.assertEqual('204', resp['status'])
+
+    @attr(type='smoke')
+    def test_show_vip(self):
+        # Verifies the details of a vip
+        resp, body = self.client.show_vip(self.vip['id'])
+        self.assertEqual('200', resp['status'])
+        vip = body['vip']
+        self.assertEqual(self.vip['id'], vip['id'])
+        self.assertEqual(self.vip['name'], vip['name'])
+
+    @attr(type='smoke')
+    def test_show_pool(self):
+        # Verifies the details of a pool
+        resp, body = self.client.show_pool(self.pool['id'])
+        self.assertEqual('200', resp['status'])
+        pool = body['pool']
+        self.assertEqual(self.pool['id'], pool['id'])
+        self.assertEqual(self.pool['name'], pool['name'])
+
+    @attr(type='smoke')
+    def test_list_pools(self):
+        # Verify the pool exists in the list of all pools
+        resp, body = self.client.list_pools()
+        self.assertEqual('200', resp['status'])
+        pools = body['pools']
+        self.assertIn(self.pool['id'], [p['id'] for p in pools])
+
+    @attr(type='smoke')
+    def test_list_members(self):
+        # Verify the member exists in the list of all members
+        resp, body = self.client.list_members()
+        self.assertEqual('200', resp['status'])
+        members = body['members']
+        self.assertIn(self.member['id'], [m['id'] for m in members])
+
+    @attr(type='smoke')
+    def test_create_update_delete_member(self):
+        # Creates a member
+        resp, body = self.client.create_member("10.0.9.46", 80,
+                                               self.pool['id'])
+        self.assertEqual('201', resp['status'])
+        member = body['member']
+        # Verification of member update
+        admin_state = [False, 'False']
+        resp, body = self.client.update_member(admin_state[0], member['id'])
+        self.assertEqual('200', resp['status'])
+        updated_member = body['member']
+        self.assertIn(updated_member['admin_state_up'], admin_state)
+        # Verification of member delete
+        resp, body = self.client.delete_member(member['id'])
+        self.assertEqual('204', resp['status'])
+
+    @attr(type='smoke')
+    def test_show_member(self):
+        # Verifies the details of a member
+        resp, body = self.client.show_member(self.member['id'])
+        self.assertEqual('200', resp['status'])
+        member = body['member']
+        self.assertEqual(self.member['id'], member['id'])
+        self.assertEqual(self.member['admin_state_up'],
+                         member['admin_state_up'])
+
+    @attr(type='smoke')
+    def test_list_health_monitors(self):
+        # Verify the health monitor exists in the list of all health monitors
+        resp, body = self.client.list_health_monitors()
+        self.assertEqual('200', resp['status'])
+        health_monitors = body['health_monitors']
+        self.assertIn(self.health_monitor['id'],
+                      [h['id'] for h in health_monitors])
+
+    @attr(type='smoke')
+    def test_create_update_delete_health_monitor(self):
+        # Creates a health_monitor
+        resp, body = self.client.create_health_monitor(4, 3, "TCP", 1)
+        self.assertEqual('201', resp['status'])
+        health_monitor = body['health_monitor']
+        # Verification of health_monitor update
+        admin_state = [False, 'False']
+        resp, body = self.client.update_health_monitor(admin_state[0],
+                                                       health_monitor['id'])
+        self.assertEqual('200', resp['status'])
+        updated_health_monitor = body['health_monitor']
+        self.assertIn(updated_health_monitor['admin_state_up'], admin_state)
+        # Verification of health_monitor delete
+        resp, body = self.client.delete_health_monitor(health_monitor['id'])
+        self.assertEqual('204', resp['status'])
+
+    @attr(type='smoke')
+    def test_show_health_monitor(self):
+        # Verifies the details of a health_monitor
+        resp, body = self.client.show_health_monitor(self.health_monitor['id'])
+        self.assertEqual('200', resp['status'])
+        health_monitor = body['health_monitor']
+        self.assertEqual(self.health_monitor['id'], health_monitor['id'])
+        self.assertEqual(self.health_monitor['admin_state_up'],
+                         health_monitor['admin_state_up'])
+
+    @attr(type='smoke')
+    def test_associate_disassociate_health_monitor_with_pool(self):
+        # Verify that a health monitor can be associated with a pool
+        resp, body = (self.client.associate_health_monitor_with_pool
+                     (self.health_monitor['id'], self.pool['id']))
+        self.assertEqual('201', resp['status'])
+        # Verify that a health monitor can be disassociated from a pool
+        resp, body = (self.client.disassociate_health_monitor_with_pool
+                     (self.health_monitor['id'], self.pool['id']))
+        self.assertEqual('204', resp['status'])
+
+
+class LoadBalancerXML(LoadBalancerJSON):
+    _interface = 'xml'
diff --git a/tempest/api/network/test_networks.py b/tempest/api/network/test_networks.py
index f3d1485..a2b4ab3 100644
--- a/tempest/api/network/test_networks.py
+++ b/tempest/api/network/test_networks.py
@@ -63,18 +63,6 @@
         cls.cidr = cls.subnet['cidr']
         cls.port = cls.create_port(cls.network)
 
-    def _delete_networks(self, created_networks):
-        for n in created_networks:
-            resp, body = self.client.delete_network(n['id'])
-            self.assertEqual(204, resp.status)
-        # Asserting that the networks are not found in the list after deletion
-        resp, body = self.client.list_networks()
-        networks_list = list()
-        for network in body['networks']:
-            networks_list.append(network['id'])
-        for n in created_networks:
-            self.assertNotIn(n['id'], networks_list)
-
     @attr(type='smoke')
     def test_create_update_delete_network_subnet(self):
         # Creates a network
@@ -208,6 +196,81 @@
         self.assertRaises(exceptions.NotFound, self.client.show_subnet,
                           non_exist_id)
 
+    @attr(type=['negative', 'smoke'])
+    def test_show_non_existent_port(self):
+        non_exist_id = rand_name('port')
+        self.assertRaises(exceptions.NotFound, self.client.show_port,
+                          non_exist_id)
+
+
+class NetworksTestXML(NetworksTestJSON):
+    _interface = 'xml'
+
+
+class BulkNetworkOpsJSON(base.BaseNetworkTest):
+    _interface = 'json'
+
+    """
+    Tests the following operations in the Neutron API using the REST client for
+    Neutron:
+
+        bulk network creation
+        bulk subnet creation
+        bulk subnet creation
+        list tenant's networks
+
+    v2.0 of the Neutron API is assumed. It is also assumed that the following
+    options are defined in the [network] section of etc/tempest.conf:
+
+        tenant_network_cidr with a block of cidr's from which smaller blocks
+        can be allocated for tenant networks
+
+        tenant_network_mask_bits with the mask bits to be used to partition the
+        block defined by tenant-network_cidr
+    """
+
+    @classmethod
+    def setUpClass(cls):
+        super(BulkNetworkOpsJSON, cls).setUpClass()
+        cls.network1 = cls.create_network()
+        cls.network2 = cls.create_network()
+
+    def _delete_networks(self, created_networks):
+        for n in created_networks:
+            resp, body = self.client.delete_network(n['id'])
+            self.assertEqual(204, resp.status)
+        # Asserting that the networks are not found in the list after deletion
+        resp, body = self.client.list_networks()
+        networks_list = list()
+        for network in body['networks']:
+            networks_list.append(network['id'])
+        for n in created_networks:
+            self.assertNotIn(n['id'], networks_list)
+
+    def _delete_subnets(self, created_subnets):
+        for n in created_subnets:
+            resp, body = self.client.delete_subnet(n['id'])
+            self.assertEqual(204, resp.status)
+        # Asserting that the subnets are not found in the list after deletion
+        resp, body = self.client.list_subnets()
+        subnets_list = list()
+        for subnet in body['subnets']:
+            subnets_list.append(subnet['id'])
+        for n in created_subnets:
+            self.assertNotIn(n['id'], subnets_list)
+
+    def _delete_ports(self, created_ports):
+        for n in created_ports:
+            resp, body = self.client.delete_port(n['id'])
+            self.assertEqual(204, resp.status)
+        # Asserting that the ports are not found in the list after deletion
+        resp, body = self.client.list_ports()
+        ports_list = list()
+        for port in body['ports']:
+            ports_list.append(port['id'])
+        for n in created_ports:
+            self.assertNotIn(n['id'], ports_list)
+
     @attr(type='smoke')
     def test_bulk_create_delete_network(self):
         # Creates 2 networks in one request
@@ -225,6 +288,74 @@
             self.assertIsNotNone(n['id'])
             self.assertIn(n['id'], networks_list)
 
+    @attr(type='smoke')
+    def test_bulk_create_delete_subnet(self):
+        # Creates 2 subnets in one request
+        cidr = netaddr.IPNetwork(self.network_cfg.tenant_network_cidr)
+        mask_bits = self.network_cfg.tenant_network_mask_bits
+        cidrs = []
+        for subnet_cidr in cidr.subnet(mask_bits):
+            cidrs.append(subnet_cidr)
+        names = []
+        networks = [self.network1['id'], self.network2['id']]
+        for i in range(len(networks)):
+            names.append(rand_name('subnet-'))
+        subnet_list = []
+        # TODO(raies): "for IPv6, version list [4, 6] will be used.
+        # and cidr for IPv6 will be of IPv6"
+        ip_version = [4, 4]
+        for i in range(len(names)):
+            p1 = {
+                'network_id': networks[i],
+                'cidr': str(cidrs[(i)]),
+                'name': names[i],
+                'ip_version': ip_version[i]
+            }
+            subnet_list.append(p1)
+        del subnet_list[1]['name']
+        resp, body = self.client.create_bulk_subnet(subnet_list)
+        created_subnets = body['subnets']
+        self.addCleanup(self._delete_subnets, created_subnets)
+        self.assertEqual('201', resp['status'])
+        # Asserting that the subnets are found in the list after creation
+        resp, body = self.client.list_subnets()
+        subnets_list = list()
+        for subnet in body['subnets']:
+            subnets_list.append(subnet['id'])
+        for n in created_subnets:
+            self.assertIsNotNone(n['id'])
+            self.assertIn(n['id'], subnets_list)
 
-class NetworksTestXML(NetworksTestJSON):
+    @attr(type='smoke')
+    def test_bulk_create_delete_port(self):
+        # Creates 2 ports in one request
+        names = []
+        networks = [self.network1['id'], self.network2['id']]
+        for i in range(len(networks)):
+            names.append(rand_name('port-'))
+        port_list = []
+        state = [True, False]
+        for i in range(len(names)):
+            p1 = {
+                'network_id': networks[i],
+                'name': names[i],
+                'admin_state_up': state[i],
+            }
+            port_list.append(p1)
+        del port_list[1]['name']
+        resp, body = self.client.create_bulk_port(port_list)
+        created_ports = body['ports']
+        self.addCleanup(self._delete_ports, created_ports)
+        self.assertEqual('201', resp['status'])
+        # Asserting that the ports are found in the list after creation
+        resp, body = self.client.list_ports()
+        ports_list = list()
+        for port in body['ports']:
+            ports_list.append(port['id'])
+        for n in created_ports:
+            self.assertIsNotNone(n['id'])
+            self.assertIn(n['id'], ports_list)
+
+
+class BulkNetworkOpsXML(BulkNetworkOpsJSON):
     _interface = 'xml'
diff --git a/tempest/api/network/test_routers.py b/tempest/api/network/test_routers.py
index 9f8c742..8b939fe 100644
--- a/tempest/api/network/test_routers.py
+++ b/tempest/api/network/test_routers.py
@@ -97,7 +97,7 @@
         name = rand_name('router-')
         resp, create_body = self.client.create_router(name)
         self.addCleanup(self.client.delete_router, create_body['router']['id'])
-        # Add router interafce with subnet id
+        # Add router interface with subnet id
         resp, interface = self.client.add_router_interface_with_subnet_id(
             create_body['router']['id'], subnet['id'])
         self.assertEqual('200', resp['status'])
diff --git a/tempest/api/network/test_security_groups.py b/tempest/api/network/test_security_groups.py
index 24f8286..60ca88a 100644
--- a/tempest/api/network/test_security_groups.py
+++ b/tempest/api/network/test_security_groups.py
@@ -31,7 +31,7 @@
     def _delete_security_group(self, secgroup_id):
         resp, _ = self.client.delete_security_group(secgroup_id)
         self.assertEqual(204, resp.status)
-        # Asserting that the secgroup is not found in the list
+        # Asserting that the security group is not found in the list
         # after deletion
         resp, list_body = self.client.list_security_groups()
         self.assertEqual('200', resp['status'])
@@ -43,7 +43,7 @@
     def _delete_security_group_rule(self, rule_id):
         resp, _ = self.client.delete_security_group_rule(rule_id)
         self.assertEqual(204, resp.status)
-        # Asserting that the secgroup is not found in the list
+        # Asserting that the security group is not found in the list
         # after deletion
         resp, list_body = self.client.list_security_group_rules()
         self.assertEqual('200', resp['status'])
@@ -88,7 +88,7 @@
         for secgroup in list_body['security_groups']:
             secgroup_list.append(secgroup['id'])
         self.assertIn(group_create_body['security_group']['id'], secgroup_list)
-        # No Udpate in security group
+        # No Update in security group
         # Create rule
         resp, rule_create_body = self.client.create_security_group_rule(
             group_create_body['security_group']['id']
diff --git a/tempest/api/object_storage/base.py b/tempest/api/object_storage/base.py
index e6e8d17..1d16b2f 100644
--- a/tempest/api/object_storage/base.py
+++ b/tempest/api/object_storage/base.py
@@ -73,6 +73,11 @@
         cls.data = DataGenerator(cls.identity_admin_client)
 
     @classmethod
+    def tearDownClass(cls):
+        cls.isolated_creds.clear_isolated_creds()
+        super(BaseObjectTest, cls).tearDownClass()
+
+    @classmethod
     def _assign_member_role(cls):
         primary_user = cls.isolated_creds.get_primary_user()
         alt_user = cls.isolated_creds.get_alt_user()
diff --git a/tempest/api/object_storage/test_account_services.py b/tempest/api/object_storage/test_account_services.py
index b443933..d4201ee 100644
--- a/tempest/api/object_storage/test_account_services.py
+++ b/tempest/api/object_storage/test_account_services.py
@@ -59,7 +59,7 @@
             params = {'limit': limit}
             resp, container_list = \
                 self.account_client.list_account_containers(params=params)
-            self.assertEquals(len(container_list), limit)
+            self.assertEqual(len(container_list), limit)
 
     @attr(type='smoke')
     def test_list_containers_with_marker(self):
@@ -70,11 +70,11 @@
         params = {'marker': self.containers[-1]}
         resp, container_list = \
             self.account_client.list_account_containers(params=params)
-        self.assertEquals(len(container_list), 0)
+        self.assertEqual(len(container_list), 0)
         params = {'marker': self.containers[self.containers_count / 2]}
         resp, container_list = \
             self.account_client.list_account_containers(params=params)
-        self.assertEquals(len(container_list), self.containers_count / 2 - 1)
+        self.assertEqual(len(container_list), self.containers_count / 2 - 1)
 
     @attr(type='smoke')
     def test_list_containers_with_end_marker(self):
@@ -85,11 +85,11 @@
         params = {'end_marker': self.containers[0]}
         resp, container_list = \
             self.account_client.list_account_containers(params=params)
-        self.assertEquals(len(container_list), 0)
+        self.assertEqual(len(container_list), 0)
         params = {'end_marker': self.containers[self.containers_count / 2]}
         resp, container_list = \
             self.account_client.list_account_containers(params=params)
-        self.assertEquals(len(container_list), self.containers_count / 2)
+        self.assertEqual(len(container_list), self.containers_count / 2)
 
     @attr(type='smoke')
     def test_list_containers_with_limit_and_marker(self):
diff --git a/tempest/api/orchestration/stacks/test_neutron_resources.py b/tempest/api/orchestration/stacks/test_neutron_resources.py
index c934020..174c82a 100644
--- a/tempest/api/orchestration/stacks/test_neutron_resources.py
+++ b/tempest/api/orchestration/stacks/test_neutron_resources.py
@@ -147,7 +147,7 @@
 
     @attr(type='slow')
     def test_created_network(self):
-        """Verifies created netowrk."""
+        """Verifies created network."""
         network_id = self.test_resources.get('Network')['physical_resource_id']
         resp, body = self.network_client.show_network(network_id)
         self.assertEqual('200', resp['status'])
diff --git a/tempest/api/orchestration/stacks/test_server_cfn_init.py b/tempest/api/orchestration/stacks/test_server_cfn_init.py
index ffe8def..41849d0 100644
--- a/tempest/api/orchestration/stacks/test_server_cfn_init.py
+++ b/tempest/api/orchestration/stacks/test_server_cfn_init.py
@@ -158,7 +158,7 @@
         resp, body = self.client.get_resource(sid, rid)
         self.assertEqual('CREATE_COMPLETE', body['resource_status'])
 
-        # fetch the ip address from servers client, since we can't get it
+        # fetch the IP address from servers client, since we can't get it
         # from the stack until stack create is complete
         resp, server = self.servers_client.get_server(
             body['physical_resource_id'])
diff --git a/tempest/api/volume/test_volumes_actions.py b/tempest/api/volume/test_volumes_actions.py
index 766a2c7..ad80505 100644
--- a/tempest/api/volume/test_volumes_actions.py
+++ b/tempest/api/volume/test_volumes_actions.py
@@ -103,7 +103,9 @@
         # there is no way to delete it from Cinder, so we delete it from Glance
         # using the Glance image_client and from Cinder via tearDownClass.
         image_name = rand_name('Image-')
-        resp, body = self.client.upload_volume(self.volume['id'], image_name)
+        resp, body = self.client.upload_volume(self.volume['id'],
+                                               image_name,
+                                               self.config.volume.disk_format)
         image_id = body["image_id"]
         self.addCleanup(self.image_client.delete_image, image_id)
         self.assertEqual(202, resp.status)
diff --git a/tempest/api/volume/test_volumes_get.py b/tempest/api/volume/test_volumes_get.py
index f7f428c..70fe1a3 100644
--- a/tempest/api/volume/test_volumes_get.py
+++ b/tempest/api/volume/test_volumes_get.py
@@ -34,7 +34,7 @@
         self.assertEqual(202, resp.status)
         self.client.wait_for_resource_deletion(volume_id)
 
-    def _volume_create_get_delete(self, **kwargs):
+    def _volume_create_get_update_delete(self, **kwargs):
         # Create a volume, Get it's details and Delete the volume
         volume = {}
         v_name = rand_name('Volume')
@@ -69,6 +69,33 @@
                          fetched_volume['metadata'],
                          'The fetched Volume is different '
                          'from the created Volume')
+        if 'imageRef' in kwargs:
+            self.assertEqual(fetched_volume['bootable'], True)
+        if 'imageRef' not in kwargs:
+            self.assertEqual(fetched_volume['bootable'], False)
+
+        # Update Volume
+        new_v_name = rand_name('new-Volume')
+        new_desc = 'This is the new description of volume'
+        resp, update_volume = \
+            self.client.update_volume(volume['id'],
+                                      display_name=new_v_name,
+                                      display_description=new_desc)
+        # Assert response body for update_volume method
+        self.assertEqual(200, resp.status)
+        self.assertEqual(new_v_name, update_volume['display_name'])
+        self.assertEqual(new_desc, update_volume['display_description'])
+        # Assert response body for get_volume method
+        resp, updated_volume = self.client.get_volume(volume['id'])
+        self.assertEqual(200, resp.status)
+        self.assertEqual(volume['id'], updated_volume['id'])
+        self.assertEqual(new_v_name, updated_volume['display_name'])
+        self.assertEqual(new_desc, updated_volume['display_description'])
+        self.assertEqual(metadata, updated_volume['metadata'])
+        if 'imageRef' in kwargs:
+            self.assertEqual(updated_volume['bootable'], True)
+        if 'imageRef' not in kwargs:
+            self.assertEqual(updated_volume['bootable'], False)
 
     @attr(type='gate')
     def test_volume_get_metadata_none(self):
@@ -90,19 +117,20 @@
         self.assertEqual(fetched_volume['metadata'], {})
 
     @attr(type='smoke')
-    def test_volume_create_get_delete(self):
-        self._volume_create_get_delete()
+    def test_volume_create_get_update_delete(self):
+        self._volume_create_get_update_delete()
 
     @attr(type='smoke')
     @services('image')
-    def test_volume_create_get_delete_from_image(self):
-        self._volume_create_get_delete(imageRef=self.config.compute.image_ref)
+    def test_volume_create_get_update_delete_from_image(self):
+        self._volume_create_get_update_delete(imageRef=self.
+                                              config.compute.image_ref)
 
     @attr(type='gate')
-    def test_volume_create_get_delete_as_clone(self):
+    def test_volume_create_get_update_delete_as_clone(self):
         origin = self.create_volume(size=1,
                                     display_name="Volume Origin")
-        self._volume_create_get_delete(source_volid=origin['id'])
+        self._volume_create_get_update_delete(source_volid=origin['id'])
 
 
 class VolumesGetTestXML(VolumesGetTest):
diff --git a/tempest/api/volume/test_volumes_list.py b/tempest/api/volume/test_volumes_list.py
index 8c39e08..d9c9e48 100644
--- a/tempest/api/volume/test_volumes_list.py
+++ b/tempest/api/volume/test_volumes_list.py
@@ -17,8 +17,11 @@
 
 from tempest.api.volume import base
 from tempest.common.utils.data_utils import rand_name
+from tempest.openstack.common import log as logging
 from tempest.test import attr
 
+LOG = logging.getLogger(__name__)
+
 
 class VolumesListTest(base.BaseVolumeTest):
 
@@ -27,7 +30,7 @@
     ensure that the backing file for the volume group that Nova uses
     has space for at least 3 1G volumes!
     If you are running a Devstack environment, ensure that the
-    VOLUME_BACKING_FILE_SIZE is atleast 4G in your localrc
+    VOLUME_BACKING_FILE_SIZE is at least 4G in your localrc
     """
 
     _interface = 'json'
@@ -64,22 +67,17 @@
                 resp, volume = cls.client.get_volume(volume['id'])
                 cls.volume_list.append(volume)
                 cls.volume_id_list.append(volume['id'])
-            except Exception:
+            except Exception as exc:
+                LOG.exception(exc)
                 if cls.volume_list:
                     # We could not create all the volumes, though we were able
                     # to create *some* of the volumes. This is typically
                     # because the backing file size of the volume group is
-                    # too small. So, here, we clean up whatever we did manage
-                    # to create and raise a SkipTest
+                    # too small.
                     for volid in cls.volume_id_list:
                         cls.client.delete_volume(volid)
                         cls.client.wait_for_resource_deletion(volid)
-                    msg = ("Failed to create ALL necessary volumes to run "
-                           "test. This typically means that the backing file "
-                           "size of the nova-volumes group is too small to "
-                           "create the 3 volumes needed by this test case")
-                    raise cls.skipException(msg)
-                raise
+                raise exc
 
     @classmethod
     def tearDownClass(cls):
diff --git a/tempest/api/volume/test_volumes_negative.py b/tempest/api/volume/test_volumes_negative.py
index e2b15a4..014ab32 100644
--- a/tempest/api/volume/test_volumes_negative.py
+++ b/tempest/api/volume/test_volumes_negative.py
@@ -31,8 +31,8 @@
 
     @attr(type='gate')
     def test_volume_get_nonexistant_volume_id(self):
-        # Should not be able to get a nonexistant volume
-        # Creating a nonexistant volume id
+        # Should not be able to get a non-existent volume
+        # Creating a non-existent volume id
         volume_id_list = []
         resp, volumes = self.client.list_volumes()
         for i in range(len(volumes)):
@@ -41,14 +41,14 @@
             non_exist_id = rand_name('999')
             if non_exist_id not in volume_id_list:
                 break
-        # Trying to Get a non existant volume
+        # Trying to Get a non-existent volume
         self.assertRaises(exceptions.NotFound, self.client.get_volume,
                           non_exist_id)
 
     @attr(type='gate')
     def test_volume_delete_nonexistant_volume_id(self):
-        # Should not be able to delete a nonexistant Volume
-        # Creating nonexistant volume id
+        # Should not be able to delete a non-existent Volume
+        # Creating non-existent volume id
         volume_id_list = []
         resp, volumes = self.client.list_volumes()
         for i in range(len(volumes)):
@@ -57,7 +57,7 @@
             non_exist_id = '12345678-abcd-4321-abcd-123456789098'
             if non_exist_id not in volume_id_list:
                 break
-        # Try to Delete a non existant volume
+        # Try to delete a non-existent volume
         self.assertRaises(exceptions.NotFound, self.client.delete_volume,
                           non_exist_id)
 
diff --git a/tempest/api/volume/test_volumes_snapshots.py b/tempest/api/volume/test_volumes_snapshots.py
index 0328b44..6b186e5 100644
--- a/tempest/api/volume/test_volumes_snapshots.py
+++ b/tempest/api/volume/test_volumes_snapshots.py
@@ -38,7 +38,7 @@
         super(VolumesSnapshotTest, cls).tearDownClass()
 
     @attr(type='gate')
-    def test_snapshot_create_get_list_delete(self):
+    def test_snapshot_create_get_list_update_delete(self):
         # Create a snapshot
         s_name = rand_name('snap')
         snapshot = self.create_snapshot(self.volume_origin['id'],
@@ -58,6 +58,24 @@
         snaps_data = [(f['id'], f['display_name']) for f in snaps_list]
         self.assertIn(tracking_data, snaps_data)
 
+        # Updates snapshot with new values
+        new_s_name = rand_name('new-snap')
+        new_desc = 'This is the new description of snapshot.'
+        resp, update_snapshot = \
+            self.snapshots_client.update_snapshot(snapshot['id'],
+                                                  display_name=new_s_name,
+                                                  display_description=new_desc)
+        # Assert response body for update_snapshot method
+        self.assertEqual(200, resp.status)
+        self.assertEqual(new_s_name, update_snapshot['display_name'])
+        self.assertEqual(new_desc, update_snapshot['display_description'])
+        # Assert response body for get_snapshot method
+        resp, updated_snapshot = \
+            self.snapshots_client.get_snapshot(snapshot['id'])
+        self.assertEqual(200, resp.status)
+        self.assertEqual(new_s_name, updated_snapshot['display_name'])
+        self.assertEqual(new_desc, updated_snapshot['display_description'])
+
         # Delete the snapshot
         self.snapshots_client.delete_snapshot(snapshot['id'])
         self.assertEqual(200, resp.status)
diff --git a/tempest/cli/README.rst b/tempest/cli/README.rst
index f86adf3..dcd940b 100644
--- a/tempest/cli/README.rst
+++ b/tempest/cli/README.rst
@@ -1,5 +1,5 @@
-Tempest Guide to CLI tests
-==========================
+Tempest Field Guide to CLI tests
+================================
 
 
 What are these tests?
diff --git a/tempest/cli/__init__.py b/tempest/cli/__init__.py
index cbb8d08..b082b1e 100644
--- a/tempest/cli/__init__.py
+++ b/tempest/cli/__init__.py
@@ -95,9 +95,11 @@
         """Executes given command with auth attributes appended."""
         # TODO(jogo) make admin=False work
         creds = ('--os-username %s --os-tenant-name %s --os-password %s '
-                 '--os-auth-url %s ' % (self.identity.admin_username,
-                 self.identity.admin_tenant_name, self.identity.admin_password,
-                 self.identity.uri))
+                 '--os-auth-url %s ' %
+                 (self.identity.admin_username,
+                  self.identity.admin_tenant_name,
+                  self.identity.admin_password,
+                  self.identity.uri))
         flags = creds + ' ' + flags
         return self.cmd(cmd, action, flags, params, fail_ok)
 
diff --git a/tempest/cli/output_parser.py b/tempest/cli/output_parser.py
index f22ec4e..bb3368f 100644
--- a/tempest/cli/output_parser.py
+++ b/tempest/cli/output_parser.py
@@ -158,7 +158,7 @@
 def _table_columns(first_table_row):
     """Find column ranges in output line.
 
-    Return list of touples (start,end) for each column
+    Return list of tuples (start,end) for each column
     detected by plus (+) characters in delimiter line.
     """
     positions = []
diff --git a/tempest/cli/simple_read_only/test_cinder.py b/tempest/cli/simple_read_only/test_cinder.py
index 21acae8..3ff997a 100644
--- a/tempest/cli/simple_read_only/test_cinder.py
+++ b/tempest/cli/simple_read_only/test_cinder.py
@@ -114,4 +114,7 @@
         self.cinder('list', flags='--retries 3')
 
     def test_cinder_region_list(self):
-        self.cinder('list', flags='--os-region-name ' + self.identity.region)
+        region = self.config.volume.region
+        if not region:
+            region = self.config.identity.region
+        self.cinder('list', flags='--os-region-name ' + region)
diff --git a/tempest/clients.py b/tempest/clients.py
index 48e4939..49b9283 100644
--- a/tempest/clients.py
+++ b/tempest/clients.py
@@ -71,6 +71,8 @@
     VolumesExtensionsClientXML
 from tempest.services.identity.json.identity_client import IdentityClientJSON
 from tempest.services.identity.json.identity_client import TokenClientJSON
+from tempest.services.identity.v3.json.credentials_client import \
+    CredentialsClientJSON
 from tempest.services.identity.v3.json.endpoints_client import \
     EndPointClientJSON
 from tempest.services.identity.v3.json.identity_client import \
@@ -79,6 +81,8 @@
 from tempest.services.identity.v3.json.policy_client import PolicyClientJSON
 from tempest.services.identity.v3.json.service_client import \
     ServiceClientJSON
+from tempest.services.identity.v3.xml.credentials_client import \
+    CredentialsClientXML
 from tempest.services.identity.v3.xml.endpoints_client import EndPointClientXML
 from tempest.services.identity.v3.xml.identity_client import \
     IdentityV3ClientXML
@@ -252,6 +256,11 @@
     "xml": V3TokenClientXML,
 }
 
+CREDENTIALS_CLIENT = {
+    "json": CredentialsClientJSON,
+    "xml": CredentialsClientXML,
+}
+
 
 class Manager(object):
 
@@ -336,6 +345,8 @@
             self.policy_client = POLICY_CLIENT[interface](*client_args)
             self.hypervisor_client = HYPERVISOR_CLIENT[interface](*client_args)
             self.token_v3_client = V3_TOKEN_CLIENT[interface](*client_args)
+            self.credentials_client = \
+                CREDENTIALS_CLIENT[interface](*client_args)
 
             if client_args_v3_auth:
                 self.servers_client_v3_auth = SERVERS_CLIENTS[interface](
diff --git a/tempest/common/commands.py b/tempest/common/commands.py
new file mode 100644
index 0000000..4fc85b6
--- /dev/null
+++ b/tempest/common/commands.py
@@ -0,0 +1,76 @@
+# vim: tabstop=4 shiftwidth=4 softtabstop=4
+
+# All Rights Reserved.
+#
+#    Licensed under the Apache License, Version 2.0 (the "License"); you may
+#    not use this file except in compliance with the License. You may obtain
+#    a copy of the License at
+#
+#         http://www.apache.org/licenses/LICENSE-2.0
+#
+#    Unless required by applicable law or agreed to in writing, software
+#    distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+#    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+#    License for the specific language governing permissions and limitations
+#    under the License.
+
+import shlex
+import subprocess
+
+from tempest.openstack.common import log as logging
+
+LOG = logging.getLogger(__name__)
+
+# NOTE(afazekas):
+# These commands assumes the tempest node is the same as
+# the only one service node. all-in-one installation.
+
+
+def sudo_cmd_call(cmd):
+    args = shlex.split(cmd)
+    subprocess_args = {'stdout': subprocess.PIPE,
+                       'stderr': subprocess.STDOUT}
+    try:
+        proc = subprocess.Popen(['/usr/bin/sudo'] + args, **subprocess_args)
+        return proc.communicate()[0]
+        if proc.returncode != 0:
+            LOG.error(cmd + "returned with: " +
+                      proc.returncode + "exit status")
+    except subprocess.CalledProcessError as e:
+        LOG.error("command output:\n%s" % e.output)
+
+
+def ip_addr_raw():
+    return sudo_cmd_call("ip a")
+
+
+def ip_route_raw():
+    return sudo_cmd_call("ip r")
+
+
+def ip_ns_raw():
+    return sudo_cmd_call("ip netns list")
+
+
+def iptables_raw(table):
+    return sudo_cmd_call("iptables -v -S -t " + table)
+
+
+def ip_ns_list():
+    return ip_ns_raw().split()
+
+
+def ip_ns_exec(ns, cmd):
+    return sudo_cmd_call(" ".join(("ip netns exec", ns, cmd)))
+
+
+def ip_ns_addr(ns):
+    return ip_ns_exec(ns, "ip a")
+
+
+def ip_ns_route(ns):
+    return ip_ns_exec(ns, "ip r")
+
+
+def iptables_ns(ns, table):
+    return ip_ns_exec(ns, "iptables -v -S -t " + table)
diff --git a/tempest/common/debug.py b/tempest/common/debug.py
new file mode 100644
index 0000000..69c933c
--- /dev/null
+++ b/tempest/common/debug.py
@@ -0,0 +1,41 @@
+# vim: tabstop=4 shiftwidth=4 softtabstop=4
+
+# All Rights Reserved.
+#
+#    Licensed under the Apache License, Version 2.0 (the "License"); you may
+#    not use this file except in compliance with the License. You may obtain
+#    a copy of the License at
+#
+#         http://www.apache.org/licenses/LICENSE-2.0
+#
+#    Unless required by applicable law or agreed to in writing, software
+#    distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+#    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+#    License for the specific language governing permissions and limitations
+#    under the License.
+
+from tempest.common import commands
+from tempest import config
+
+from tempest.openstack.common import log as logging
+
+LOG = logging.getLogger(__name__)
+
+tables = ['filter', 'nat', 'mangle']
+
+
+def log_ip_ns():
+    if not config.TempestConfig().debug.enable:
+        return
+    LOG.info("Host Addr:\n" + commands.ip_addr_raw())
+    LOG.info("Host Route:\n" + commands.ip_route_raw())
+    for table in ['filter', 'nat', 'mangle']:
+        LOG.info('Host %s table:\n%s', table, commands.iptables_raw(table))
+    ns_list = commands.ip_ns_list()
+    LOG.info("Host ns list" + str(ns_list))
+    for ns in ns_list:
+        LOG.info("ns(%s) Addr:\n%s", ns, commands.ip_ns_addr(ns))
+        LOG.info("ns(%s) Route:\n%s", ns, commands.ip_ns_route(ns))
+        for table in ['filter', 'nat', 'mangle']:
+            LOG.info('ns(%s) table(%s):\n%s', ns, table,
+                     commands.iptables_ns(ns, table))
diff --git a/tempest/common/isolated_creds.py b/tempest/common/isolated_creds.py
index 22e1bd2..d6b4466 100644
--- a/tempest/common/isolated_creds.py
+++ b/tempest/common/isolated_creds.py
@@ -141,10 +141,11 @@
             role = None
             try:
                 roles = self._list_roles()
+                admin_role = self.config.identity.admin_role
                 if self.tempest_client:
-                    role = next(r for r in roles if r['name'] == 'admin')
+                    role = next(r for r in roles if r['name'] == admin_role)
                 else:
-                    role = next(r for r in roles if r.name == 'admin')
+                    role = next(r for r in roles if r.name == admin_role)
             except StopIteration:
                 msg = "No admin role found"
                 raise exceptions.NotFound(msg)
diff --git a/tempest/common/rest_client.py b/tempest/common/rest_client.py
index 8dfff6e..81393a9 100644
--- a/tempest/common/rest_client.py
+++ b/tempest/common/rest_client.py
@@ -49,7 +49,17 @@
         self.service = None
         self.token = None
         self.base_url = None
-        self.region = {'compute': self.config.identity.region}
+        self.region = {}
+        for cfgname in dir(self.config):
+            # Find all config.FOO.catalog_type and assume FOO is a service.
+            cfg = getattr(self.config, cfgname)
+            catalog_type = getattr(cfg, 'catalog_type', None)
+            if not catalog_type:
+                continue
+            service_region = getattr(cfg, 'region', None)
+            if not service_region:
+                service_region = self.config.identity.region
+            self.region[catalog_type] = service_region
         self.endpoint_url = 'publicURL'
         self.headers = {'Content-Type': 'application/%s' % self.TYPE,
                         'Accept': 'application/%s' % self.TYPE}
diff --git a/tempest/common/utils/linux/remote_client.py b/tempest/common/utils/linux/remote_client.py
index 2cbb74d..0d0e794 100644
--- a/tempest/common/utils/linux/remote_client.py
+++ b/tempest/common/utils/linux/remote_client.py
@@ -52,12 +52,12 @@
         return self.ssh_client.test_connection_auth()
 
     def hostname_equals_servername(self, expected_hostname):
-        # Get hostname using command "hostname"
+        # Get host name using command "hostname"
         actual_hostname = self.ssh_client.exec_command("hostname").rstrip()
         return expected_hostname == actual_hostname
 
     def get_files(self, path):
-        # Return a list of comma seperated files
+        # Return a list of comma separated files
         command = "ls -m " + path
         return self.ssh_client.exec_command(command).rstrip('\n').split(', ')
 
diff --git a/tempest/common/waiters.py b/tempest/common/waiters.py
new file mode 100644
index 0000000..15569cd
--- /dev/null
+++ b/tempest/common/waiters.py
@@ -0,0 +1,82 @@
+# vim: tabstop=4 shiftwidth=4 softtabstop=4
+
+#    Licensed under the Apache License, Version 2.0 (the "License"); you may
+#    not use this file except in compliance with the License. You may obtain
+#    a copy of the License at
+#
+#         http://www.apache.org/licenses/LICENSE-2.0
+#
+#    Unless required by applicable law or agreed to in writing, software
+#    distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+#    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+#    License for the specific language governing permissions and limitations
+#    under the License.
+
+
+import time
+
+from tempest import config
+from tempest import exceptions
+from tempest.openstack.common import log as logging
+
+CONFIG = config.TempestConfig()
+LOG = logging.getLogger(__name__)
+
+
+# NOTE(afazekas): This function needs to know a token and a subject.
+def wait_for_server_status(client, server_id, status, ready_wait=True):
+    """Waits for a server to reach a given status."""
+
+    def _get_task_state(body):
+        task_state = body.get('OS-EXT-STS:task_state', None)
+        return task_state
+
+    # NOTE(afazekas): UNKNOWN status possible on ERROR
+    # or in a very early stage.
+    resp, body = client.get_server(server_id)
+    old_status = server_status = body['status']
+    old_task_state = task_state = _get_task_state(body)
+    start_time = int(time.time())
+    while True:
+        # NOTE(afazekas): Now the BUILD status only reached
+        # between the UNKOWN->ACTIVE transition.
+        # TODO(afazekas): enumerate and validate the stable status set
+        if status == 'BUILD' and server_status != 'UNKNOWN':
+            return
+        if server_status == status:
+            if ready_wait:
+                if status == 'BUILD':
+                    return
+                # NOTE(afazekas): The instance is in "ready for action state"
+                # when no task in progress
+                # NOTE(afazekas): Converted to string bacuse of the XML
+                # responses
+                if str(task_state) == "None":
+                    # without state api extension 3 sec usually enough
+                    time.sleep(CONFIG.compute.ready_wait)
+                    return
+            else:
+                return
+
+        time.sleep(client.build_interval)
+        resp, body = client.get_server(server_id)
+        server_status = body['status']
+        task_state = _get_task_state(body)
+        if (server_status != old_status) or (task_state != old_task_state):
+            LOG.info('State transition "%s" ==> "%s" after %d second wait',
+                     '/'.join((old_status, str(old_task_state))),
+                     '/'.join((server_status, str(task_state))),
+                     time.time() - start_time)
+        if server_status == 'ERROR':
+            raise exceptions.BuildErrorException(server_id=server_id)
+
+        timed_out = int(time.time()) - start_time >= client.build_timeout
+
+        if timed_out:
+            message = ('Server %s failed to reach %s status within the '
+                       'required time (%s s).' %
+                       (server_id, status, client.build_timeout))
+            message += ' Current status: %s.' % server_status
+            raise exceptions.TimeoutException(message)
+        old_status = server_status
+        old_task_state = task_state
diff --git a/tempest/config.py b/tempest/config.py
index acb0e8d..8058753 100644
--- a/tempest/config.py
+++ b/tempest/config.py
@@ -44,13 +44,19 @@
                help='Full URI of the OpenStack Identity API (Keystone), v3'),
     cfg.StrOpt('region',
                default='RegionOne',
-               help="The identity region name to use."),
+               help="The identity region name to use. Also used as the other "
+                    "services' region name unless they are set explicitly. "
+                    "If no such region is found in the service catalog, the "
+                    "first found one is used."),
     cfg.StrOpt('username',
                default='demo',
                help="Username to use for Nova API requests."),
     cfg.StrOpt('tenant_name',
                default='demo',
                help="Tenant name to use for Nova API requests."),
+    cfg.StrOpt('admin_role',
+               default='admin',
+               help="Role required to administrate keystone."),
     cfg.StrOpt('password',
                default='pass',
                help="API key to use when authenticating.",
@@ -174,6 +180,10 @@
                default=300,
                help="Timeout in seconds to wait for authentication to "
                     "succeed."),
+    cfg.IntOpt('ready_wait',
+               default=0,
+               help="Additinal wait time for clean state, when there is"
+                    " no OS-EXT-STS extension availiable"),
     cfg.IntOpt('ssh_channel_timeout',
                default=60,
                help="Timeout in seconds to wait for output from ssh "
@@ -193,6 +203,12 @@
     cfg.StrOpt('catalog_type',
                default='compute',
                help="Catalog type of the Compute service."),
+    cfg.StrOpt('region',
+               default='',
+               help="The compute region name to use. If empty, the value "
+                    "of identity.region is used instead. If no such region "
+                    "is found in the service catalog, the first found one is "
+                    "used."),
     cfg.StrOpt('path_to_private_key',
                default=None,
                help="Path to a private key file for SSH access to remote "
@@ -248,6 +264,12 @@
     cfg.StrOpt('catalog_type',
                default='image',
                help='Catalog type of the Image service.'),
+    cfg.StrOpt('region',
+               default='',
+               help="The image region name to use. If empty, the value "
+                    "of identity.region is used instead. If no such region "
+                    "is found in the service catalog, the first found one is "
+                    "used."),
     cfg.StrOpt('http_image',
                default='http://download.cirros-cloud.net/0.3.1/'
                'cirros-0.3.1-x86_64-uec.tar.gz',
@@ -268,6 +290,12 @@
     cfg.StrOpt('catalog_type',
                default='network',
                help='Catalog type of the Neutron service.'),
+    cfg.StrOpt('region',
+               default='',
+               help="The network region name to use. If empty, the value "
+                    "of identity.region is used instead. If no such region "
+                    "is found in the service catalog, the first found one is "
+                    "used."),
     cfg.StrOpt('tenant_network_cidr',
                default="10.100.0.0/16",
                help="The cidr block to allocate tenant networks from"),
@@ -308,6 +336,12 @@
     cfg.StrOpt('catalog_type',
                default='Volume',
                help="Catalog type of the Volume Service"),
+    cfg.StrOpt('region',
+               default='',
+               help="The volume region name to use. If empty, the value "
+                    "of identity.region is used instead. If no such region "
+                    "is found in the service catalog, the first found one is "
+                    "used."),
     cfg.BoolOpt('multi_backend_enabled',
                 default=False,
                 help="Runs Cinder multi-backend test (requires 2 backends)"),
@@ -323,6 +357,9 @@
     cfg.StrOpt('vendor_name',
                default='Open Source',
                help='Backend vendor to target when creating volume types'),
+    cfg.StrOpt('disk_format',
+               default='raw',
+               help='Disk format to use when copying a volume to image'),
 ]
 
 
@@ -339,6 +376,12 @@
     cfg.StrOpt('catalog_type',
                default='object-store',
                help="Catalog type of the Object-Storage service."),
+    cfg.StrOpt('region',
+               default='',
+               help="The object-storage region name to use. If empty, the "
+                    "value of identity.region is used instead. If no such "
+                    "region is found in the service catalog, the first found "
+                    "one is used."),
     cfg.StrOpt('container_sync_timeout',
                default=120,
                help="Number of seconds to time on waiting for a container"
@@ -370,6 +413,12 @@
     cfg.StrOpt('catalog_type',
                default='orchestration',
                help="Catalog type of the Orchestration service."),
+    cfg.StrOpt('region',
+               default='',
+               help="The orchestration region name to use. If empty, the "
+                    "value of identity.region is used instead. If no such "
+                    "region is found in the service catalog, the first found "
+                    "one is used."),
     cfg.BoolOpt('allow_tenant_isolation',
                 default=False,
                 help="Allows test cases to create/destroy tenants and "
@@ -579,6 +628,21 @@
     for opt in ServiceAvailableGroup:
         conf.register_opt(opt, group='service_available')
 
+debug_group = cfg.OptGroup(name="debug",
+                           title="Debug System")
+
+DebugGroup = [
+    cfg.BoolOpt('enable',
+                default=True,
+                help="Enable diagnostic commands"),
+]
+
+
+def register_debug_opts(conf):
+    conf.register_group(debug_group)
+    for opt in DebugGroup:
+        conf.register_opt(opt, group='debug')
+
 
 @singleton
 class TempestConfig:
diff --git a/tempest/openstack/common/excutils.py b/tempest/openstack/common/excutils.py
index 81aad14..db37660 100644
--- a/tempest/openstack/common/excutils.py
+++ b/tempest/openstack/common/excutils.py
@@ -24,6 +24,8 @@
 import time
 import traceback
 
+import six
+
 from tempest.openstack.common.gettextutils import _  # noqa
 
 
@@ -65,7 +67,7 @@
                                                      self.tb))
             return False
         if self.reraise:
-            raise self.type_, self.value, self.tb
+            six.reraise(self.type_, self.value, self.tb)
 
 
 def forever_retry_uncaught_exceptions(infunc):
@@ -77,7 +79,8 @@
             try:
                 return infunc(*args, **kwargs)
             except Exception as exc:
-                if exc.message == last_exc_message:
+                this_exc_message = unicode(exc)
+                if this_exc_message == last_exc_message:
                     exc_count += 1
                 else:
                     exc_count = 1
@@ -85,12 +88,12 @@
                 # the exception message changes
                 cur_time = int(time.time())
                 if (cur_time - last_log_time > 60 or
-                        exc.message != last_exc_message):
+                        this_exc_message != last_exc_message):
                     logging.exception(
                         _('Unexpected exception occurred %d time(s)... '
                           'retrying.') % exc_count)
                     last_log_time = cur_time
-                    last_exc_message = exc.message
+                    last_exc_message = this_exc_message
                     exc_count = 0
                 # This should be a very rare event. In case it isn't, do
                 # a sleep.
diff --git a/tempest/openstack/common/fileutils.py b/tempest/openstack/common/fileutils.py
index d2e3d3e..6cf68ba 100644
--- a/tempest/openstack/common/fileutils.py
+++ b/tempest/openstack/common/fileutils.py
@@ -69,33 +69,34 @@
     return (reloaded, cache_info['data'])
 
 
-def delete_if_exists(path):
+def delete_if_exists(path, remove=os.unlink):
     """Delete a file, but ignore file not found error.
 
     :param path: File to delete
+    :param remove: Optional function to remove passed path
     """
 
     try:
-        os.unlink(path)
+        remove(path)
     except OSError as e:
-        if e.errno == errno.ENOENT:
-            return
-        else:
+        if e.errno != errno.ENOENT:
             raise
 
 
 @contextlib.contextmanager
-def remove_path_on_error(path):
+def remove_path_on_error(path, remove=delete_if_exists):
     """Protect code that wants to operate on PATH atomically.
     Any exception will cause PATH to be removed.
 
     :param path: File to work with
+    :param remove: Optional function to remove passed path
     """
+
     try:
         yield
     except Exception:
         with excutils.save_and_reraise_exception():
-            delete_if_exists(path)
+            remove(path)
 
 
 def file_open(*args, **kwargs):
diff --git a/tempest/openstack/common/gettextutils.py b/tempest/openstack/common/gettextutils.py
index 8594937..cbf570a 100644
--- a/tempest/openstack/common/gettextutils.py
+++ b/tempest/openstack/common/gettextutils.py
@@ -1,8 +1,8 @@
 # vim: tabstop=4 shiftwidth=4 softtabstop=4
 
 # Copyright 2012 Red Hat, Inc.
-# All Rights Reserved.
 # Copyright 2013 IBM Corp.
+# All Rights Reserved.
 #
 #    Licensed under the Apache License, Version 2.0 (the "License"); you may
 #    not use this file except in compliance with the License. You may obtain
@@ -26,22 +26,44 @@
 
 import copy
 import gettext
-import logging.handlers
+import logging
 import os
 import re
-import UserString
+try:
+    import UserString as _userString
+except ImportError:
+    import collections as _userString
 
+from babel import localedata
 import six
 
 _localedir = os.environ.get('tempest'.upper() + '_LOCALEDIR')
 _t = gettext.translation('tempest', localedir=_localedir, fallback=True)
 
+_AVAILABLE_LANGUAGES = {}
+USE_LAZY = False
+
+
+def enable_lazy():
+    """Convenience function for configuring _() to use lazy gettext
+
+    Call this at the start of execution to enable the gettextutils._
+    function to use lazy gettext functionality. This is useful if
+    your project is importing _ directly instead of using the
+    gettextutils.install() way of importing the _ function.
+    """
+    global USE_LAZY
+    USE_LAZY = True
+
 
 def _(msg):
-    return _t.ugettext(msg)
+    if USE_LAZY:
+        return Message(msg, 'tempest')
+    else:
+        return _t.ugettext(msg)
 
 
-def install(domain):
+def install(domain, lazy=False):
     """Install a _() function using the given translation domain.
 
     Given a translation domain, install a _() function using gettext's
@@ -51,44 +73,48 @@
     overriding the default localedir (e.g. /usr/share/locale) using
     a translation-domain-specific environment variable (e.g.
     NOVA_LOCALEDIR).
+
+    :param domain: the translation domain
+    :param lazy: indicates whether or not to install the lazy _() function.
+                 The lazy _() introduces a way to do deferred translation
+                 of messages by installing a _ that builds Message objects,
+                 instead of strings, which can then be lazily translated into
+                 any available locale.
     """
-    gettext.install(domain,
-                    localedir=os.environ.get(domain.upper() + '_LOCALEDIR'),
-                    unicode=True)
+    if lazy:
+        # NOTE(mrodden): Lazy gettext functionality.
+        #
+        # The following introduces a deferred way to do translations on
+        # messages in OpenStack. We override the standard _() function
+        # and % (format string) operation to build Message objects that can
+        # later be translated when we have more information.
+        #
+        # Also included below is an example LocaleHandler that translates
+        # Messages to an associated locale, effectively allowing many logs,
+        # each with their own locale.
+
+        def _lazy_gettext(msg):
+            """Create and return a Message object.
+
+            Lazy gettext function for a given domain, it is a factory method
+            for a project/module to get a lazy gettext function for its own
+            translation domain (i.e. nova, glance, cinder, etc.)
+
+            Message encapsulates a string so that we can translate
+            it later when needed.
+            """
+            return Message(msg, domain)
+
+        import __builtin__
+        __builtin__.__dict__['_'] = _lazy_gettext
+    else:
+        localedir = '%s_LOCALEDIR' % domain.upper()
+        gettext.install(domain,
+                        localedir=os.environ.get(localedir),
+                        unicode=True)
 
 
-"""
-Lazy gettext functionality.
-
-The following is an attempt to introduce a deferred way
-to do translations on messages in OpenStack. We attempt to
-override the standard _() function and % (format string) operation
-to build Message objects that can later be translated when we have
-more information. Also included is an example LogHandler that
-translates Messages to an associated locale, effectively allowing
-many logs, each with their own locale.
-"""
-
-
-def get_lazy_gettext(domain):
-    """Assemble and return a lazy gettext function for a given domain.
-
-    Factory method for a project/module to get a lazy gettext function
-    for its own translation domain (i.e. nova, glance, cinder, etc.)
-    """
-
-    def _lazy_gettext(msg):
-        """Create and return a Message object.
-
-        Message encapsulates a string so that we can translate it later when
-        needed.
-        """
-        return Message(msg, domain)
-
-    return _lazy_gettext
-
-
-class Message(UserString.UserString, object):
+class Message(_userString.UserString, object):
     """Class used to encapsulate translatable messages."""
     def __init__(self, msg, domain):
         # _msg is the gettext msgid and should never change
@@ -130,7 +156,7 @@
         # look for %(blah) fields in string;
         # ignore %% and deal with the
         # case where % is first character on the line
-        keys = re.findall('(?:[^%]|^)%\((\w*)\)[a-z]', full_msg)
+        keys = re.findall('(?:[^%]|^)?%\((\w*)\)[a-z]', full_msg)
 
         # if we don't find any %(blah) blocks but have a %s
         if not keys and re.findall('(?:[^%]|^)%[a-z]', full_msg):
@@ -229,7 +255,47 @@
         if name in ops:
             return getattr(self.data, name)
         else:
-            return UserString.UserString.__getattribute__(self, name)
+            return _userString.UserString.__getattribute__(self, name)
+
+
+def get_available_languages(domain):
+    """Lists the available languages for the given translation domain.
+
+    :param domain: the domain to get languages for
+    """
+    if domain in _AVAILABLE_LANGUAGES:
+        return copy.copy(_AVAILABLE_LANGUAGES[domain])
+
+    localedir = '%s_LOCALEDIR' % domain.upper()
+    find = lambda x: gettext.find(domain,
+                                  localedir=os.environ.get(localedir),
+                                  languages=[x])
+
+    # NOTE(mrodden): en_US should always be available (and first in case
+    # order matters) since our in-line message strings are en_US
+    language_list = ['en_US']
+    # NOTE(luisg): Babel <1.0 used a function called list(), which was
+    # renamed to locale_identifiers() in >=1.0, the requirements master list
+    # requires >=0.9.6, uncapped, so defensively work with both. We can remove
+    # this check when the master list updates to >=1.0, and all projects udpate
+    list_identifiers = (getattr(localedata, 'list', None) or
+                        getattr(localedata, 'locale_identifiers'))
+    locale_identifiers = list_identifiers()
+    for i in locale_identifiers:
+        if find(i) is not None:
+            language_list.append(i)
+    _AVAILABLE_LANGUAGES[domain] = language_list
+    return copy.copy(language_list)
+
+
+def get_localized_message(message, user_locale):
+    """Gets a localized version of the given message in the given locale."""
+    if isinstance(message, Message):
+        if user_locale:
+            message.locale = user_locale
+        return unicode(message)
+    else:
+        return message
 
 
 class LocaleHandler(logging.Handler):
diff --git a/tempest/openstack/common/jsonutils.py b/tempest/openstack/common/jsonutils.py
index bd43e59..c568a06 100644
--- a/tempest/openstack/common/jsonutils.py
+++ b/tempest/openstack/common/jsonutils.py
@@ -38,14 +38,18 @@
 import inspect
 import itertools
 import json
-import types
-import xmlrpclib
+try:
+    import xmlrpclib
+except ImportError:
+    # NOTE(jd): xmlrpclib is not shipped with Python 3
+    xmlrpclib = None
 
-import netaddr
 import six
 
+from tempest.openstack.common import importutils
 from tempest.openstack.common import timeutils
 
+netaddr = importutils.try_import("netaddr")
 
 _nasty_type_tests = [inspect.ismodule, inspect.isclass, inspect.ismethod,
                      inspect.isfunction, inspect.isgeneratorfunction,
@@ -53,7 +57,8 @@
                      inspect.iscode, inspect.isbuiltin, inspect.isroutine,
                      inspect.isabstract]
 
-_simple_types = (types.NoneType, int, basestring, bool, float, long)
+_simple_types = (six.string_types + six.integer_types
+                 + (type(None), bool, float))
 
 
 def to_primitive(value, convert_instances=False, convert_datetime=True,
@@ -125,7 +130,7 @@
         # It's not clear why xmlrpclib created their own DateTime type, but
         # for our purposes, make it a datetime type which is explicitly
         # handled
-        if isinstance(value, xmlrpclib.DateTime):
+        if xmlrpclib and isinstance(value, xmlrpclib.DateTime):
             value = datetime.datetime(*tuple(value.timetuple())[:6])
 
         if convert_datetime and isinstance(value, datetime.datetime):
@@ -138,7 +143,7 @@
             # Likely an instance of something. Watch for cycles.
             # Ignore class member vars.
             return recursive(value.__dict__, level=level + 1)
-        elif isinstance(value, netaddr.IPAddress):
+        elif netaddr and isinstance(value, netaddr.IPAddress):
             return six.text_type(value)
         else:
             if any(test(value) for test in _nasty_type_tests):
diff --git a/tempest/openstack/common/local.py b/tempest/openstack/common/local.py
index f1bfc82..e82f17d 100644
--- a/tempest/openstack/common/local.py
+++ b/tempest/openstack/common/local.py
@@ -15,16 +15,15 @@
 #    License for the specific language governing permissions and limitations
 #    under the License.
 
-"""Greenthread local storage of variables using weak references"""
+"""Local storage of variables using weak references"""
 
+import threading
 import weakref
 
-from eventlet import corolocal
 
-
-class WeakLocal(corolocal.local):
+class WeakLocal(threading.local):
     def __getattribute__(self, attr):
-        rval = corolocal.local.__getattribute__(self, attr)
+        rval = super(WeakLocal, self).__getattribute__(attr)
         if rval:
             # NOTE(mikal): this bit is confusing. What is stored is a weak
             # reference, not the value itself. We therefore need to lookup
@@ -34,7 +33,7 @@
 
     def __setattr__(self, attr, value):
         value = weakref.ref(value)
-        return corolocal.local.__setattr__(self, attr, value)
+        return super(WeakLocal, self).__setattr__(attr, value)
 
 
 # NOTE(mikal): the name "store" should be deprecated in the future
@@ -45,4 +44,4 @@
 # "strong" store will hold a reference to the object so that it never falls out
 # of scope.
 weak_store = WeakLocal()
-strong_store = corolocal.local
+strong_store = threading.local()
diff --git a/tempest/openstack/common/lockutils.py b/tempest/openstack/common/lockutils.py
index 3ff1a7a..0abd1a7 100644
--- a/tempest/openstack/common/lockutils.py
+++ b/tempest/openstack/common/lockutils.py
@@ -20,10 +20,10 @@
 import errno
 import functools
 import os
+import threading
 import time
 import weakref
 
-from eventlet import semaphore
 from oslo.config import cfg
 
 from tempest.openstack.common import fileutils
@@ -137,7 +137,8 @@
 def lock(name, lock_file_prefix=None, external=False, lock_path=None):
     """Context based lock
 
-    This function yields a `semaphore.Semaphore` instance unless external is
+    This function yields a `threading.Semaphore` instance (if we don't use
+    eventlet.monkey_patch(), else `semaphore.Semaphore`) unless external is
     True, in which case, it'll yield an InterProcessLock instance.
 
     :param lock_file_prefix: The lock_file_prefix argument is used to provide
@@ -155,7 +156,7 @@
     # NOTE(soren): If we ever go natively threaded, this will be racy.
     #              See http://stackoverflow.com/questions/5390569/dyn
     #              amically-allocating-and-destroying-mutexes
-    sem = _semaphores.get(name, semaphore.Semaphore())
+    sem = _semaphores.get(name, threading.Semaphore())
     if name not in _semaphores:
         # this check is not racy - we're already holding ref locally
         # so GC won't remove the item and there was no IO switch
diff --git a/tempest/openstack/common/timeutils.py b/tempest/openstack/common/timeutils.py
index bd60489..60f02bc 100644
--- a/tempest/openstack/common/timeutils.py
+++ b/tempest/openstack/common/timeutils.py
@@ -21,6 +21,7 @@
 
 import calendar
 import datetime
+import time
 
 import iso8601
 import six
@@ -49,9 +50,9 @@
     try:
         return iso8601.parse_date(timestr)
     except iso8601.ParseError as e:
-        raise ValueError(e.message)
+        raise ValueError(unicode(e))
     except TypeError as e:
-        raise ValueError(e.message)
+        raise ValueError(unicode(e))
 
 
 def strtime(at=None, fmt=PERFECT_TIME_FORMAT):
@@ -90,6 +91,11 @@
 
 def utcnow_ts():
     """Timestamp version of our utcnow function."""
+    if utcnow.override_time is None:
+        # NOTE(kgriffs): This is several times faster
+        # than going through calendar.timegm(...)
+        return int(time.time())
+
     return calendar.timegm(utcnow().timetuple())
 
 
diff --git a/tempest/scenario/README.rst b/tempest/scenario/README.rst
index 98b74e4..eea889a 100644
--- a/tempest/scenario/README.rst
+++ b/tempest/scenario/README.rst
@@ -1,5 +1,5 @@
-Tempest Guide to Scenario tests
-===============================
+Tempest Field Guide to Scenario tests
+=====================================
 
 
 What are these tests?
diff --git a/tempest/scenario/manager.py b/tempest/scenario/manager.py
index d3c2a18..9137b93 100644
--- a/tempest/scenario/manager.py
+++ b/tempest/scenario/manager.py
@@ -16,6 +16,7 @@
 #    License for the specific language governing permissions and limitations
 #    under the License.
 
+import logging
 import os
 import subprocess
 
@@ -37,11 +38,18 @@
 from tempest.common.utils.linux.remote_client import RemoteClient
 from tempest import exceptions
 import tempest.manager
-from tempest.openstack.common import log as logging
+from tempest.openstack.common import log
 import tempest.test
 
 
-LOG = logging.getLogger(__name__)
+LOG = log.getLogger(__name__)
+
+# NOTE(afazekas): Workaround for the stdout logging
+LOG_nova_client = logging.getLogger('novaclient.client')
+LOG_nova_client.addHandler(log.NullHandler())
+
+LOG_cinder_client = logging.getLogger('cinderclient.client')
+LOG_cinder_client.addHandler(log.NullHandler())
 
 
 class OfficialClientManager(tempest.manager.Manager):
@@ -89,7 +97,8 @@
                                         *client_args,
                                         service_type=service_type,
                                         no_cache=True,
-                                        insecure=dscv)
+                                        insecure=dscv,
+                                        http_log_debug=True)
 
     def _get_image_client(self):
         token = self.identity_client.auth_token
@@ -105,7 +114,8 @@
                                           username,
                                           password,
                                           tenant_name,
-                                          auth_url)
+                                          auth_url,
+                                          http_log_debug=True)
 
     def _get_orchestration_client(self, username=None, password=None,
                                   tenant_name=None):
@@ -415,7 +425,7 @@
         self.addCleanup(image_client.images.delete, image_id)
         self.status_timeout(image_client.images, image_id, 'active')
         snapshot_image = image_client.images.get(image_id)
-        self.assertEquals(name, snapshot_image.name)
+        self.assertEqual(name, snapshot_image.name)
         LOG.debug("Created snapshot image %s for server %s",
                   snapshot_image.name, server.name)
         return snapshot_image
diff --git a/tempest/scenario/orchestration/test_autoscaling.py b/tempest/scenario/orchestration/test_autoscaling.py
index 88f2ebd..1a4d802 100644
--- a/tempest/scenario/orchestration/test_autoscaling.py
+++ b/tempest/scenario/orchestration/test_autoscaling.py
@@ -85,7 +85,7 @@
 
         def server_count():
             # the number of servers is the number of resources
-            # in the nexted stack
+            # in the nested stack
             self.server_count = len(
                 self.client.resources.list(nested_stack_id))
             return self.server_count
diff --git a/tempest/scenario/test_network_basic_ops.py b/tempest/scenario/test_network_basic_ops.py
index 662e919..daa7d13 100644
--- a/tempest/scenario/test_network_basic_ops.py
+++ b/tempest/scenario/test_network_basic_ops.py
@@ -17,6 +17,7 @@
 #    under the License.
 
 from tempest.api.network import common as net_common
+from tempest.common import debug
 from tempest.common.utils.data_utils import rand_name
 from tempest import config
 from tempest.openstack.common import log as logging
@@ -62,7 +63,7 @@
      Tempest host.  A public network is assumed to be reachable from
      the Tempest host, and it should be possible to associate a public
      ('floating') IP address with a tenant ('fixed') IP address to
-     faciliate external connectivity to a potentially unroutable
+     facilitate external connectivity to a potentially unroutable
      tenant IP address.
 
      This test suite can be configured to test network connectivity to
@@ -202,21 +203,25 @@
             self.assertIn(myrouter.name, seen_router_names)
             self.assertIn(myrouter.id, seen_router_ids)
 
+    def _create_server(self, name, network):
+        tenant_id = network.tenant_id
+        keypair_name = self.keypairs[tenant_id].name
+        security_groups = [self.security_groups[tenant_id].name]
+        create_kwargs = {
+            'nics': [
+                {'net-id': network.id},
+            ],
+            'key_name': keypair_name,
+            'security_groups': security_groups,
+        }
+        server = self.create_server(self.compute_client, name=name,
+                                    create_kwargs=create_kwargs)
+        return server
+
     def _create_servers(self):
         for i, network in enumerate(self.networks):
-            tenant_id = network.tenant_id
             name = rand_name('server-smoke-%d-' % i)
-            keypair_name = self.keypairs[tenant_id].name
-            security_groups = [self.security_groups[tenant_id].name]
-            create_kwargs = {
-                'nics': [
-                    {'net-id': network.id},
-                ],
-                'key_name': keypair_name,
-                'security_groups': security_groups,
-            }
-            server = self.create_server(self.compute_client, name=name,
-                                        create_kwargs=create_kwargs)
+            server = self._create_server(name, network)
             self.servers.append(server)
 
     def _check_tenant_network_connectivity(self):
@@ -246,10 +251,17 @@
         # key-based authentication by cloud-init.
         ssh_login = self.config.compute.image_ssh_user
         private_key = self.keypairs[self.tenant_id].private_key
-        for server, floating_ips in self.floating_ips.iteritems():
-            for floating_ip in floating_ips:
-                ip_address = floating_ip.floating_ip_address
-                self._check_vm_connectivity(ip_address, ssh_login, private_key)
+        try:
+            for server, floating_ips in self.floating_ips.iteritems():
+                for floating_ip in floating_ips:
+                    ip_address = floating_ip.floating_ip_address
+                    self._check_vm_connectivity(ip_address,
+                                                ssh_login,
+                                                private_key)
+        except Exception as exc:
+            LOG.exception(exc)
+            debug.log_ip_ns()
+            raise exc
 
     @attr(type='smoke')
     @services('compute', 'network')
@@ -259,6 +271,6 @@
         self._create_networks()
         self._check_networks()
         self._create_servers()
-        self._check_tenant_network_connectivity()
         self._assign_floating_ips()
         self._check_public_network_connectivity()
+        self._check_tenant_network_connectivity()
diff --git a/tempest/scenario/test_server_advanced_ops.py b/tempest/scenario/test_server_advanced_ops.py
index cf72cd4..9c50489 100644
--- a/tempest/scenario/test_server_advanced_ops.py
+++ b/tempest/scenario/test_server_advanced_ops.py
@@ -15,7 +15,6 @@
 #    License for the specific language governing permissions and limitations
 #    under the License.
 
-from tempest.common.utils.data_utils import rand_name
 from tempest.openstack.common import log as logging
 from tempest.scenario import manager
 from tempest.test import services
@@ -49,18 +48,7 @@
     @services('compute')
     def test_resize_server_confirm(self):
         # We create an instance for use in this test
-        i_name = rand_name('instance')
-        flavor_id = self.config.compute.flavor_ref
-        base_image_id = self.config.compute.image_ref
-        self.instance = self.compute_client.servers.create(
-            i_name, base_image_id, flavor_id)
-        self.assertEqual(self.instance.name, i_name)
-        self.set_resource('instance', self.instance)
-        self.assertEqual(self.instance.status, 'BUILD')
-        instance_id = self.get_resource('instance').id
-        self.status_timeout(
-            self.compute_client.servers, instance_id, 'ACTIVE')
-        instance = self.get_resource('instance')
+        instance = self.create_server(self.compute_client)
         instance_id = instance.id
         resize_flavor = self.config.compute.flavor_ref_alt
         LOG.debug("Resizing instance %s from flavor %s to flavor %s",
@@ -78,18 +66,7 @@
     @services('compute')
     def test_server_sequence_suspend_resume(self):
         # We create an instance for use in this test
-        i_name = rand_name('instance')
-        flavor_id = self.config.compute.flavor_ref
-        base_image_id = self.config.compute.image_ref
-        self.instance = self.compute_client.servers.create(
-            i_name, base_image_id, flavor_id)
-        self.assertEqual(self.instance.name, i_name)
-        self.set_resource('instance', self.instance)
-        self.assertEqual(self.instance.status, 'BUILD')
-        instance_id = self.get_resource('instance').id
-        self.status_timeout(
-            self.compute_client.servers, instance_id, 'ACTIVE')
-        instance = self.get_resource('instance')
+        instance = self.create_server(self.compute_client)
         instance_id = instance.id
         LOG.debug("Suspending instance %s. Current status: %s",
                   instance_id, instance.status)
diff --git a/tempest/scenario/test_stamp_pattern.py b/tempest/scenario/test_stamp_pattern.py
index c5a4aaf..ab464e3 100644
--- a/tempest/scenario/test_stamp_pattern.py
+++ b/tempest/scenario/test_stamp_pattern.py
@@ -92,7 +92,7 @@
         self.addCleanup(cleaner)
         self._wait_for_volume_status(volume, 'available')
         self._wait_for_volume_snapshot_status(snapshot, 'available')
-        self.assertEquals(snapshot_name, snapshot.display_name)
+        self.assertEqual(snapshot_name, snapshot.display_name)
         return snapshot
 
     def _wait_for_volume_status(self, volume, status):
diff --git a/tempest/services/botoclients.py b/tempest/services/botoclients.py
index 66fb7af..a689c89 100644
--- a/tempest/services/botoclients.py
+++ b/tempest/services/botoclients.py
@@ -111,7 +111,10 @@
         aws_secret = config.boto.aws_secret
         purl = urlparse.urlparse(config.boto.ec2_url)
 
-        region = boto.ec2.regioninfo.RegionInfo(name=config.identity.region,
+        region_name = config.compute.region
+        if not region_name:
+            region_name = config.identity.region
+        region = boto.ec2.regioninfo.RegionInfo(name=region_name,
                                                 endpoint=purl.hostname)
         port = purl.port
         if port is None:
diff --git a/tempest/services/compute/json/servers_client.py b/tempest/services/compute/json/servers_client.py
index c5827f6..1f2daec 100644
--- a/tempest/services/compute/json/servers_client.py
+++ b/tempest/services/compute/json/servers_client.py
@@ -21,6 +21,7 @@
 import urllib
 
 from tempest.common.rest_client import RestClient
+from tempest.common import waiters
 from tempest import exceptions
 
 
@@ -152,28 +153,7 @@
 
     def wait_for_server_status(self, server_id, status):
         """Waits for a server to reach a given status."""
-        resp, body = self.get_server(server_id)
-        server_status = body['status']
-        start = int(time.time())
-
-        while(server_status != status):
-            if status == 'BUILD' and server_status != 'UNKNOWN':
-                return
-            time.sleep(self.build_interval)
-            resp, body = self.get_server(server_id)
-            server_status = body['status']
-
-            if server_status == 'ERROR':
-                raise exceptions.BuildErrorException(server_id=server_id)
-
-            timed_out = int(time.time()) - start >= self.build_timeout
-
-            if server_status != status and timed_out:
-                message = ('Server %s failed to reach %s status within the '
-                           'required time (%s s).' %
-                           (server_id, status, self.build_timeout))
-                message += ' Current status: %s.' % server_status
-                raise exceptions.TimeoutException(message)
+        return waiters.wait_for_server_status(self, server_id, status)
 
     def wait_for_server_termination(self, server_id, ignore_error=False):
         """Waits for server to reach termination."""
diff --git a/tempest/services/compute/xml/servers_client.py b/tempest/services/compute/xml/servers_client.py
index 6f17611..bf72bdc 100644
--- a/tempest/services/compute/xml/servers_client.py
+++ b/tempest/services/compute/xml/servers_client.py
@@ -22,6 +22,7 @@
 from lxml import etree
 
 from tempest.common.rest_client import RestClientXML
+from tempest.common import waiters
 from tempest import exceptions
 from tempest.openstack.common import log as logging
 from tempest.services.compute.xml.common import Document
@@ -336,28 +337,7 @@
 
     def wait_for_server_status(self, server_id, status):
         """Waits for a server to reach a given status."""
-        resp, body = self.get_server(server_id)
-        server_status = body['status']
-        start = int(time.time())
-
-        while(server_status != status):
-            if status == 'BUILD' and server_status != 'UNKNOWN':
-                return
-            time.sleep(self.build_interval)
-            resp, body = self.get_server(server_id)
-            server_status = body['status']
-
-            if server_status == 'ERROR':
-                raise exceptions.BuildErrorException(server_id=server_id)
-
-            timed_out = int(time.time()) - start >= self.build_timeout
-
-            if server_status != status and timed_out:
-                message = ('Server %s failed to reach %s status within the '
-                           'required time (%s s).' %
-                           (server_id, status, self.build_timeout))
-                message += ' Current status: %s.' % server_status
-                raise exceptions.TimeoutException(message)
+        return waiters.wait_for_server_status(self, server_id, status)
 
     def wait_for_server_termination(self, server_id, ignore_error=False):
         """Waits for server to reach termination."""
diff --git a/tempest/services/identity/v3/json/credentials_client.py b/tempest/services/identity/v3/json/credentials_client.py
new file mode 100644
index 0000000..c3f788a
--- /dev/null
+++ b/tempest/services/identity/v3/json/credentials_client.py
@@ -0,0 +1,97 @@
+# vim: tabstop=4 shiftwidth=4 softtabstop=4
+
+# Copyright 2013 OpenStack Foundation
+# All Rights Reserved.
+#
+#    Licensed under the Apache License, Version 2.0 (the "License"); you may
+#    not use this file except in compliance with the License. You may obtain
+#    a copy of the License at
+#
+#         http://www.apache.org/licenses/LICENSE-2.0
+#
+#    Unless required by applicable law or agreed to in writing, software
+#    distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+#    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+#    License for the specific language governing permissions and limitations
+#    under the License.
+
+import json
+from urlparse import urlparse
+
+from tempest.common.rest_client import RestClient
+
+
+class CredentialsClientJSON(RestClient):
+
+    def __init__(self, config, username, password, auth_url, tenant_name=None):
+        super(CredentialsClientJSON, self).__init__(config, username, password,
+                                                    auth_url, tenant_name)
+        self.service = self.config.identity.catalog_type
+        self.endpoint_url = 'adminURL'
+
+    def request(self, method, url, headers=None, body=None, wait=None):
+        """Overriding the existing HTTP request in super class rest_client."""
+        self._set_auth()
+        self.base_url = self.base_url.replace(urlparse(self.base_url).path,
+                                              "/v3")
+        return super(CredentialsClientJSON, self).request(method, url,
+                                                          headers=headers,
+                                                          body=body)
+
+    def create_credential(self, access_key, secret_key, user_id, project_id):
+        """Creates a credential."""
+        blob = "{\"access\": \"%s\", \"secret\": \"%s\"}" % (
+            access_key, secret_key)
+        post_body = {
+            "blob": blob,
+            "project_id": project_id,
+            "type": "ec2",
+            "user_id": user_id
+        }
+        post_body = json.dumps({'credential': post_body})
+        resp, body = self.post('credentials', post_body,
+                               self.headers)
+        body = json.loads(body)
+        body['credential']['blob'] = json.loads(body['credential']['blob'])
+        return resp, body['credential']
+
+    def update_credential(self, credential_id, **kwargs):
+        """Updates a credential."""
+        resp, body = self.get_credential(credential_id)
+        cred_type = kwargs.get('type', body['type'])
+        access_key = kwargs.get('access_key', body['blob']['access'])
+        secret_key = kwargs.get('secret_key', body['blob']['secret'])
+        project_id = kwargs.get('project_id', body['project_id'])
+        user_id = kwargs.get('user_id', body['user_id'])
+        blob = "{\"access\": \"%s\", \"secret\": \"%s\"}" % (
+            access_key, secret_key)
+        post_body = {
+            "blob": blob,
+            "project_id": project_id,
+            "type": cred_type,
+            "user_id": user_id
+        }
+        post_body = json.dumps({'credential': post_body})
+        resp, body = self.patch('credentials/%s' % credential_id, post_body,
+                                self.headers)
+        body = json.loads(body)
+        body['credential']['blob'] = json.loads(body['credential']['blob'])
+        return resp, body['credential']
+
+    def get_credential(self, credential_id):
+        """To GET Details of a credential."""
+        resp, body = self.get('credentials/%s' % credential_id)
+        body = json.loads(body)
+        body['credential']['blob'] = json.loads(body['credential']['blob'])
+        return resp, body['credential']
+
+    def list_credentials(self):
+        """Lists out all the available credentials."""
+        resp, body = self.get('credentials')
+        body = json.loads(body)
+        return resp, body['credentials']
+
+    def delete_credential(self, credential_id):
+        """Deletes a credential."""
+        resp, body = self.delete('credentials/%s' % credential_id)
+        return resp, body
diff --git a/tempest/services/identity/v3/xml/credentials_client.py b/tempest/services/identity/v3/xml/credentials_client.py
new file mode 100644
index 0000000..dc0ade1
--- /dev/null
+++ b/tempest/services/identity/v3/xml/credentials_client.py
@@ -0,0 +1,121 @@
+# vim: tabstop=4 shiftwidth=4 softtabstop=4
+
+# Copyright 2013 OpenStack Foundation
+# All Rights Reserved.
+#
+#    Licensed under the Apache License, Version 2.0 (the "License"); you may
+#    not use this file except in compliance with the License. You may obtain
+#    a copy of the License at
+#
+#         http://www.apache.org/licenses/LICENSE-2.0
+#
+#    Unless required by applicable law or agreed to in writing, software
+#    distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+#    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+#    License for the specific language governing permissions and limitations
+#    under the License.
+
+import json
+from urlparse import urlparse
+
+from lxml import etree
+
+from tempest.common.rest_client import RestClientXML
+from tempest.services.compute.xml.common import Document
+from tempest.services.compute.xml.common import Element
+from tempest.services.compute.xml.common import Text
+from tempest.services.compute.xml.common import xml_to_json
+
+
+XMLNS = "http://docs.openstack.org/identity/api/v3"
+
+
+class CredentialsClientXML(RestClientXML):
+
+    def __init__(self, config, username, password, auth_url, tenant_name=None):
+        super(CredentialsClientXML, self).__init__(config, username, password,
+                                                   auth_url, tenant_name)
+        self.service = self.config.identity.catalog_type
+        self.endpoint_url = 'adminURL'
+
+    def request(self, method, url, headers=None, body=None, wait=None):
+        """Overriding the existing HTTP request in super class rest_client."""
+        self._set_auth()
+        self.base_url = self.base_url.replace(urlparse(self.base_url).path,
+                                              "/v3")
+        return super(CredentialsClientXML, self).request(method, url,
+                                                         headers=headers,
+                                                         body=body)
+
+    def _parse_body(self, body):
+        data = xml_to_json(body)
+        return data
+
+    def _parse_creds(self, node):
+        array = []
+        for child in node.getchildren():
+            tag_list = child.tag.split('}', 1)
+            if tag_list[1] == "credential":
+                array.append(xml_to_json(child))
+        return array
+
+    def create_credential(self, access_key, secret_key, user_id, project_id):
+        """Creates a credential."""
+        cred_type = 'ec2'
+        access = "&quot;access&quot;: &quot;%s&quot;" % access_key
+        secret = "&quot;secret&quot;: &quot;%s&quot;" % secret_key
+        blob = Element('blob',
+                       xmlns=XMLNS)
+        blob.append(Text("{%s , %s}"
+                         % (access, secret)))
+        credential = Element('credential', project_id=project_id,
+                             type=cred_type, user_id=user_id)
+        credential.append(blob)
+        resp, body = self.post('credentials', str(Document(credential)),
+                               self.headers)
+        body = self._parse_body(etree.fromstring(body))
+        body['blob'] = json.loads(body['blob'])
+        return resp, body
+
+    def update_credential(self, credential_id, **kwargs):
+        """Updates a credential."""
+        resp, body = self.get_credential(credential_id)
+        cred_type = kwargs.get('type', body['type'])
+        access_key = kwargs.get('access_key', body['blob']['access'])
+        secret_key = kwargs.get('secret_key', body['blob']['secret'])
+        project_id = kwargs.get('project_id', body['project_id'])
+        user_id = kwargs.get('user_id', body['user_id'])
+        access = "&quot;access&quot;: &quot;%s&quot;" % access_key
+        secret = "&quot;secret&quot;: &quot;%s&quot;" % secret_key
+        blob = Element('blob',
+                       xmlns=XMLNS)
+        blob.append(Text("{%s , %s}"
+                         % (access, secret)))
+        credential = Element('credential', project_id=project_id,
+                             type=cred_type, user_id=user_id)
+        credential.append(blob)
+        resp, body = self.patch('credentials/%s' % credential_id,
+                                str(Document(credential)),
+                                self.headers)
+        body = self._parse_body(etree.fromstring(body))
+        body['blob'] = json.loads(body['blob'])
+        return resp, body
+
+    def get_credential(self, credential_id):
+        """To GET Details of a credential."""
+        resp, body = self.get('credentials/%s' % credential_id, self.headers)
+        body = self._parse_body(etree.fromstring(body))
+        body['blob'] = json.loads(body['blob'])
+        return resp, body
+
+    def list_credentials(self):
+        """Lists out all the available credentials."""
+        resp, body = self.get('credentials', self.headers)
+        body = self._parse_creds(etree.fromstring(body))
+        return resp, body
+
+    def delete_credential(self, credential_id):
+        """Deletes a credential."""
+        resp, body = self.delete('credentials/%s' % credential_id,
+                                 self.headers)
+        return resp, body
diff --git a/tempest/services/network/json/network_client.py b/tempest/services/network/json/network_client.py
index 3550878..369dd81 100644
--- a/tempest/services/network/json/network_client.py
+++ b/tempest/services/network/json/network_client.py
@@ -375,6 +375,14 @@
         body = json.loads(body)
         return resp, body
 
+    def create_bulk_subnet(self, subnet_list):
+        post_body = {'subnets': subnet_list}
+        body = json.dumps(post_body)
+        uri = '%s/subnets' % (self.uri_prefix)
+        resp, body = self.post(uri, headers=self.headers, body=body)
+        body = json.loads(body)
+        return resp, body
+
     def delete_security_group_rule(self, rule_id):
         uri = '%s/security-group-rules/%s' % (self.uri_prefix, rule_id)
         resp, body = self.delete(uri, self.headers)
@@ -385,3 +393,208 @@
         resp, body = self.get(uri, self.headers)
         body = json.loads(body)
         return resp, body
+
+    def create_bulk_port(self, port_list):
+        post_body = {'ports': port_list}
+        body = json.dumps(post_body)
+        uri = '%s/ports' % (self.uri_prefix)
+        resp, body = self.post(uri, headers=self.headers, body=body)
+        body = json.loads(body)
+        return resp, body
+
+    def list_vips(self):
+        uri = '%s/lb/vips' % (self.uri_prefix)
+        resp, body = self.get(uri, self.headers)
+        body = json.loads(body)
+        return resp, body
+
+    def create_vip(self, name, protocol, protocol_port, subnet_id, pool_id):
+        post_body = {
+            "vip": {
+                "protocol": protocol,
+                "name": name,
+                "subnet_id": subnet_id,
+                "pool_id": pool_id,
+                "protocol_port": protocol_port
+            }
+        }
+        body = json.dumps(post_body)
+        uri = '%s/lb/vips' % (self.uri_prefix)
+        resp, body = self.post(uri, headers=self.headers, body=body)
+        body = json.loads(body)
+        return resp, body
+
+    def create_pool(self, name, lb_method, protocol, subnet_id):
+        post_body = {
+            "pool": {
+                "protocol": protocol,
+                "name": name,
+                "subnet_id": subnet_id,
+                "lb_method": lb_method
+            }
+        }
+        body = json.dumps(post_body)
+        uri = '%s/lb/pools' % (self.uri_prefix)
+        resp, body = self.post(uri, headers=self.headers, body=body)
+        body = json.loads(body)
+        return resp, body
+
+    def show_vip(self, uuid):
+        uri = '%s/lb/vips/%s' % (self.uri_prefix, uuid)
+        resp, body = self.get(uri, self.headers)
+        body = json.loads(body)
+        return resp, body
+
+    def delete_vip(self, uuid):
+        uri = '%s/lb/vips/%s' % (self.uri_prefix, uuid)
+        resp, body = self.delete(uri, self.headers)
+        return resp, body
+
+    def delete_pool(self, uuid):
+        uri = '%s/lb/pools/%s' % (self.uri_prefix, uuid)
+        resp, body = self.delete(uri, self.headers)
+        return resp, body
+
+    def update_vip(self, vip_id, new_name):
+        put_body = {
+            "vip": {
+                "name": new_name,
+            }
+        }
+        body = json.dumps(put_body)
+        uri = '%s/lb/vips/%s' % (self.uri_prefix, vip_id)
+        resp, body = self.put(uri, body=body, headers=self.headers)
+        body = json.loads(body)
+        return resp, body
+
+    def update_pool(self, pool_id, new_name):
+        put_body = {
+            "pool": {
+                "name": new_name,
+            }
+        }
+        body = json.dumps(put_body)
+        uri = '%s/lb/pools/%s' % (self.uri_prefix, pool_id)
+        resp, body = self.put(uri, body=body, headers=self.headers)
+        body = json.loads(body)
+        return resp, body
+
+    def list_pools(self):
+        uri = '%s/lb/pools' % (self.uri_prefix)
+        resp, body = self.get(uri, self.headers)
+        body = json.loads(body)
+        return resp, body
+
+    def show_pool(self, uuid):
+        uri = '%s/lb/pools/%s' % (self.uri_prefix, uuid)
+        resp, body = self.get(uri, self.headers)
+        body = json.loads(body)
+        return resp, body
+
+    def list_members(self):
+        uri = '%s/lb/members' % (self.uri_prefix)
+        resp, body = self.get(uri, self.headers)
+        body = json.loads(body)
+        return resp, body
+
+    def create_member(self, address, protocol_port, pool_id):
+        post_body = {
+            "member": {
+                "protocol_port": protocol_port,
+                "pool_id": pool_id,
+                "address": address
+            }
+        }
+        body = json.dumps(post_body)
+        uri = '%s/lb/members' % (self.uri_prefix)
+        resp, body = self.post(uri, headers=self.headers, body=body)
+        body = json.loads(body)
+        return resp, body
+
+    def show_member(self, uuid):
+        uri = '%s/lb/members/%s' % (self.uri_prefix, uuid)
+        resp, body = self.get(uri, self.headers)
+        body = json.loads(body)
+        return resp, body
+
+    def delete_member(self, uuid):
+        uri = '%s/lb/members/%s' % (self.uri_prefix, uuid)
+        resp, body = self.delete(uri, self.headers)
+        return resp, body
+
+    def update_member(self, admin_state_up, member_id):
+        put_body = {
+            "member": {
+                "admin_state_up": admin_state_up
+            }
+        }
+        body = json.dumps(put_body)
+        uri = '%s/lb/members/%s' % (self.uri_prefix, member_id)
+        resp, body = self.put(uri, body=body, headers=self.headers)
+        body = json.loads(body)
+        return resp, body
+
+    def list_health_monitors(self):
+        uri = '%s/lb/health_monitors' % (self.uri_prefix)
+        resp, body = self.get(uri, self.headers)
+        body = json.loads(body)
+        return resp, body
+
+    def create_health_monitor(self, delay, max_retries, Type, timeout):
+        post_body = {
+            "health_monitor": {
+                "delay": delay,
+                "max_retries": max_retries,
+                "type": Type,
+                "timeout": timeout
+            }
+        }
+        body = json.dumps(post_body)
+        uri = '%s/lb/health_monitors' % (self.uri_prefix)
+        resp, body = self.post(uri, headers=self.headers, body=body)
+        body = json.loads(body)
+        return resp, body
+
+    def show_health_monitor(self, uuid):
+        uri = '%s/lb/health_monitors/%s' % (self.uri_prefix, uuid)
+        resp, body = self.get(uri, self.headers)
+        body = json.loads(body)
+        return resp, body
+
+    def delete_health_monitor(self, uuid):
+        uri = '%s/lb/health_monitors/%s' % (self.uri_prefix, uuid)
+        resp, body = self.delete(uri, self.headers)
+        return resp, body
+
+    def update_health_monitor(self, admin_state_up, uuid):
+        put_body = {
+            "health_monitor": {
+                "admin_state_up": admin_state_up
+            }
+        }
+        body = json.dumps(put_body)
+        uri = '%s/lb/health_monitors/%s' % (self.uri_prefix, uuid)
+        resp, body = self.put(uri, body=body, headers=self.headers)
+        body = json.loads(body)
+        return resp, body
+
+    def associate_health_monitor_with_pool(self, health_monitor_id,
+                                           pool_id):
+        post_body = {
+            "health_monitor": {
+                "id": health_monitor_id,
+            }
+        }
+        body = json.dumps(post_body)
+        uri = '%s/lb/pools/%s/health_monitors' % (self.uri_prefix,
+                                                  pool_id)
+        resp, body = self.post(uri, headers=self.headers, body=body)
+        body = json.loads(body)
+        return resp, body
+
+    def disassociate_health_monitor_with_pool(self, health_monitor_id,
+                                              pool_id):
+        uri = '%s/lb/pools/%s/health_monitors/%s' % (self.uri_prefix, pool_id,
+                                                     health_monitor_id)
+        resp, body = self.delete(uri, headers=self.headers)
+        return resp, body
diff --git a/tempest/services/network/xml/network_client.py b/tempest/services/network/xml/network_client.py
index 0aef92f..a9b5512 100755
--- a/tempest/services/network/xml/network_client.py
+++ b/tempest/services/network/xml/network_client.py
@@ -219,6 +219,215 @@
         body = _root_tag_fetcher_and_xml_to_json_parse(body)
         return resp, body
 
+    def create_bulk_subnet(self, subnet_list):
+        uri = '%s/subnets' % (self.uri_prefix)
+        post_body = Element("subnets")
+        for i in range(len(subnet_list)):
+            v = subnet_list[i]
+            p1 = Element("subnet")
+            for k, kv in v.iteritems():
+                p2 = Element(k, kv)
+                p1.append(p2)
+            post_body.append(p1)
+        resp, body = self.post(uri, str(Document(post_body)), self.headers)
+        subnets = self._parse_array(etree.fromstring(body))
+        subnets = {"subnets": subnets}
+        return resp, subnets
+
+    def create_bulk_port(self, port_list):
+        uri = '%s/ports' % (self.uri_prefix)
+        post_body = Element("ports")
+        for i in range(len(port_list)):
+            v = port_list[i]
+            p1 = Element("port")
+            for k, kv in v.iteritems():
+                p2 = Element(k, kv)
+                p1.append(p2)
+            post_body.append(p1)
+        resp, body = self.post(uri, str(Document(post_body)), self.headers)
+        ports = self._parse_array(etree.fromstring(body))
+        ports = {"ports": ports}
+        return resp, ports
+
+    def list_vips(self):
+        url = '%s/lb/vips' % (self.uri_prefix)
+        resp, body = self.get(url, self.headers)
+        vips = self._parse_array(etree.fromstring(body))
+        vips = {"vips": vips}
+        return resp, vips
+
+    def create_vip(self, name, protocol, protocol_port, subnet_id, pool_id):
+        uri = '%s/lb/vips' % (self.uri_prefix)
+        post_body = Element("vip")
+        p1 = Element("name", name)
+        p2 = Element("protocol", protocol)
+        p3 = Element("protocol_port", protocol_port)
+        p4 = Element("subnet_id", subnet_id)
+        p5 = Element("pool_id", pool_id)
+        post_body.append(p1)
+        post_body.append(p2)
+        post_body.append(p3)
+        post_body.append(p4)
+        post_body.append(p5)
+        resp, body = self.post(uri, str(Document(post_body)), self.headers)
+        body = _root_tag_fetcher_and_xml_to_json_parse(body)
+        return resp, body
+
+    def delete_vip(self, vip_id):
+        uri = '%s/lb/vips/%s' % (self.uri_prefix, str(vip_id))
+        return self.delete(uri, self.headers)
+
+    def show_vip(self, vip_id):
+        uri = '%s/lb/vips/%s' % (self.uri_prefix, str(vip_id))
+        resp, body = self.get(uri, self.headers)
+        body = _root_tag_fetcher_and_xml_to_json_parse(body)
+        return resp, body
+
+    def update_vip(self, vip_id, new_name):
+        uri = '%s/lb/vips/%s' % (self.uri_prefix, str(vip_id))
+        put_body = Element("vip")
+        p2 = Element("name", new_name)
+        put_body.append(p2)
+        resp, body = self.put(uri, str(Document(put_body)), self.headers)
+        body = _root_tag_fetcher_and_xml_to_json_parse(body)
+        return resp, body
+
+    def list_pools(self):
+        url = '%s/lb/pools' % (self.uri_prefix)
+        resp, body = self.get(url, self.headers)
+        pools = self._parse_array(etree.fromstring(body))
+        pools = {"pools": pools}
+        return resp, pools
+
+    def create_pool(self, name, lb_method, protocol, subnet_id):
+        uri = '%s/lb/pools' % (self.uri_prefix)
+        post_body = Element("pool")
+        p1 = Element("lb_method", lb_method)
+        p2 = Element("protocol", protocol)
+        p3 = Element("subnet_id", subnet_id)
+        post_body.append(p1)
+        post_body.append(p2)
+        post_body.append(p3)
+        resp, body = self.post(uri, str(Document(post_body)), self.headers)
+        body = _root_tag_fetcher_and_xml_to_json_parse(body)
+        return resp, body
+
+    def delete_pool(self, pool_id):
+        uri = '%s/lb/pools/%s' % (self.uri_prefix, str(pool_id))
+        return self.delete(uri, self.headers)
+
+    def show_pool(self, pool_id):
+        uri = '%s/lb/pools/%s' % (self.uri_prefix, str(pool_id))
+        resp, body = self.get(uri, self.headers)
+        body = _root_tag_fetcher_and_xml_to_json_parse(body)
+        return resp, body
+
+    def update_pool(self, pool_id, new_name):
+        uri = '%s/lb/pools/%s' % (self.uri_prefix, str(pool_id))
+        put_body = Element("pool")
+        p2 = Element("name", new_name)
+        put_body.append(p2)
+        resp, body = self.put(uri, str(Document(put_body)), self.headers)
+        body = _root_tag_fetcher_and_xml_to_json_parse(body)
+        return resp, body
+
+    def list_members(self):
+        url = '%s/lb/members' % (self.uri_prefix)
+        resp, body = self.get(url, self.headers)
+        members = self._parse_array(etree.fromstring(body))
+        members = {"members": members}
+        return resp, members
+
+    def create_member(self, address, protocol_port, pool_id):
+        uri = '%s/lb/members' % (self.uri_prefix)
+        post_body = Element("member")
+        p1 = Element("address", address)
+        p2 = Element("protocol_port", protocol_port)
+        p3 = Element("pool_id", pool_id)
+        post_body.append(p1)
+        post_body.append(p2)
+        post_body.append(p3)
+        resp, body = self.post(uri, str(Document(post_body)), self.headers)
+        body = _root_tag_fetcher_and_xml_to_json_parse(body)
+        return resp, body
+
+    def delete_member(self, member_id):
+        uri = '%s/lb/members/%s' % (self.uri_prefix, str(member_id))
+        return self.delete(uri, self.headers)
+
+    def show_member(self, member_id):
+        uri = '%s/lb/members/%s' % (self.uri_prefix, str(member_id))
+        resp, body = self.get(uri, self.headers)
+        body = _root_tag_fetcher_and_xml_to_json_parse(body)
+        return resp, body
+
+    def update_member(self, admin_state_up, member_id):
+        uri = '%s/lb/members/%s' % (self.uri_prefix, str(member_id))
+        put_body = Element("member")
+        p2 = Element("admin_state_up", admin_state_up)
+        put_body.append(p2)
+        resp, body = self.put(uri, str(Document(put_body)), self.headers)
+        body = _root_tag_fetcher_and_xml_to_json_parse(body)
+        return resp, body
+
+    def list_health_monitors(self):
+        uri = '%s/lb/health_monitors' % (self.uri_prefix)
+        resp, body = self.get(uri, self.headers)
+        body = self._parse_array(etree.fromstring(body))
+        body = {"health_monitors": body}
+        return resp, body
+
+    def create_health_monitor(self, delay, max_retries, Type, timeout):
+        uri = '%s/lb/health_monitors' % (self.uri_prefix)
+        post_body = Element("health_monitor")
+        p1 = Element("delay", delay)
+        p2 = Element("max_retries", max_retries)
+        p3 = Element("type", Type)
+        p4 = Element("timeout", timeout)
+        post_body.append(p1)
+        post_body.append(p2)
+        post_body.append(p3)
+        post_body.append(p4)
+        resp, body = self.post(uri, str(Document(post_body)), self.headers)
+        body = _root_tag_fetcher_and_xml_to_json_parse(body)
+        return resp, body
+
+    def delete_health_monitor(self, uuid):
+        uri = '%s/lb/health_monitors/%s' % (self.uri_prefix, str(uuid))
+        return self.delete(uri, self.headers)
+
+    def show_health_monitor(self, uuid):
+        uri = '%s/lb/health_monitors/%s' % (self.uri_prefix, str(uuid))
+        resp, body = self.get(uri, self.headers)
+        body = _root_tag_fetcher_and_xml_to_json_parse(body)
+        return resp, body
+
+    def update_health_monitor(self, admin_state_up, uuid):
+        uri = '%s/lb/health_monitors/%s' % (self.uri_prefix, str(uuid))
+        put_body = Element("health_monitor")
+        p2 = Element("admin_state_up", admin_state_up)
+        put_body.append(p2)
+        resp, body = self.put(uri, str(Document(put_body)), self.headers)
+        body = _root_tag_fetcher_and_xml_to_json_parse(body)
+        return resp, body
+
+    def associate_health_monitor_with_pool(self, health_monitor_id,
+                                           pool_id):
+        uri = '%s/lb/pools/%s/health_monitors' % (self.uri_prefix,
+                                                  pool_id)
+        post_body = Element("health_monitor")
+        p1 = Element("id", health_monitor_id,)
+        post_body.append(p1)
+        resp, body = self.post(uri, str(Document(post_body)), self.headers)
+        body = _root_tag_fetcher_and_xml_to_json_parse(body)
+        return resp, body
+
+    def disassociate_health_monitor_with_pool(self, health_monitor_id,
+                                              pool_id):
+        uri = '%s/lb/pools/%s/health_monitors/%s' % (self.uri_prefix, pool_id,
+                                                     health_monitor_id)
+        return self.delete(uri, self.headers)
+
 
 def _root_tag_fetcher_and_xml_to_json_parse(xml_returned_body):
     body = ET.fromstring(xml_returned_body)
diff --git a/tempest/services/object_storage/container_client.py b/tempest/services/object_storage/container_client.py
index dd5f3ec..75f7a33 100644
--- a/tempest/services/object_storage/container_client.py
+++ b/tempest/services/object_storage/container_client.py
@@ -35,7 +35,7 @@
                          metadata_prefix='X-Container-Meta-'):
         """
            Creates a container, with optional metadata passed in as a
-           dictonary
+           dictionary
         """
         url = str(container_name)
         headers = {}
@@ -92,9 +92,9 @@
         """
             Returns complete list of all objects in the container, even if
             item count is beyond 10,000 item listing limit.
-            Does not require any paramaters aside from container name.
+            Does not require any parameters aside from container name.
         """
-        # TODO(dwalleck):  Rewite using json format to avoid newlines at end of
+        # TODO(dwalleck): Rewrite using json format to avoid newlines at end of
         # obj names. Set limit to API limit - 1 (max returned items = 9999)
         limit = 9999
         if params is not None:
diff --git a/tempest/services/object_storage/object_client.py b/tempest/services/object_storage/object_client.py
index 1c97869..c605a45 100644
--- a/tempest/services/object_storage/object_client.py
+++ b/tempest/services/object_storage/object_client.py
@@ -126,7 +126,7 @@
         return resp, body
 
     def get_object_using_temp_url(self, container, object_name, expires, key):
-        """Retrieve object's data using temp URL."""
+        """Retrieve object's data using temporary URL."""
 
         self._set_auth()
         method = 'GET'
diff --git a/tempest/services/volume/json/snapshots_client.py b/tempest/services/volume/json/snapshots_client.py
index ce2da90..10ba3fd 100644
--- a/tempest/services/volume/json/snapshots_client.py
+++ b/tempest/services/volume/json/snapshots_client.py
@@ -76,6 +76,14 @@
         body = json.loads(body)
         return resp, body['snapshot']
 
+    def update_snapshot(self, snapshot_id, **kwargs):
+        """Updates a snapshot."""
+        put_body = json.dumps({'snapshot': kwargs})
+        resp, body = self.put('snapshots/%s' % snapshot_id, put_body,
+                              self.headers)
+        body = json.loads(body)
+        return resp, body['snapshot']
+
     # NOTE(afazekas): just for the wait function
     def _get_snapshot_status(self, snapshot_id):
         resp, body = self.get_snapshot(snapshot_id)
diff --git a/tempest/services/volume/json/volumes_client.py b/tempest/services/volume/json/volumes_client.py
index 2ae73b1..32b6270 100644
--- a/tempest/services/volume/json/volumes_client.py
+++ b/tempest/services/volume/json/volumes_client.py
@@ -85,14 +85,23 @@
         body = json.loads(body)
         return resp, body['volume']
 
+    def update_volume(self, volume_id, **kwargs):
+        """Updates the Specified Volume."""
+        put_body = json.dumps({'volume': kwargs})
+        resp, body = self.put('volumes/%s' % volume_id, put_body,
+                              self.headers)
+        body = json.loads(body)
+        return resp, body['volume']
+
     def delete_volume(self, volume_id):
         """Deletes the Specified Volume."""
         return self.delete("volumes/%s" % str(volume_id))
 
-    def upload_volume(self, volume_id, image_name):
+    def upload_volume(self, volume_id, image_name, disk_format):
         """Uploads a volume in Glance."""
         post_body = {
             'image_name': image_name,
+            'disk_format': disk_format
         }
         post_body = json.dumps({'os-volume_upload_image': post_body})
         url = 'volumes/%s/action' % (volume_id)
diff --git a/tempest/services/volume/xml/snapshots_client.py b/tempest/services/volume/xml/snapshots_client.py
index 51c46da..b7ba56b 100644
--- a/tempest/services/volume/xml/snapshots_client.py
+++ b/tempest/services/volume/xml/snapshots_client.py
@@ -81,7 +81,7 @@
         display_name: Optional snapshot Name.
         display_description: User friendly snapshot description.
         """
-        # NOTE(afazekas): it should use the volume namaspace
+        # NOTE(afazekas): it should use the volume namespace
         snapshot = Element("snapshot", xmlns=XMLNS_11, volume_id=volume_id)
         for key, value in kwargs.items():
             snapshot.add_attr(key, value)
@@ -90,6 +90,16 @@
         body = xml_to_json(etree.fromstring(body))
         return resp, body
 
+    def update_snapshot(self, snapshot_id, **kwargs):
+        """Updates a snapshot."""
+        put_body = Element("snapshot", xmlns=XMLNS_11, **kwargs)
+
+        resp, body = self.put('snapshots/%s' % snapshot_id,
+                              str(Document(put_body)),
+                              self.headers)
+        body = xml_to_json(etree.fromstring(body))
+        return resp, body
+
     # NOTE(afazekas): just for the wait function
     def _get_snapshot_status(self, snapshot_id):
         resp, body = self.get_snapshot(snapshot_id)
diff --git a/tempest/services/volume/xml/volumes_client.py b/tempest/services/volume/xml/volumes_client.py
index 936e036..7915637 100644
--- a/tempest/services/volume/xml/volumes_client.py
+++ b/tempest/services/volume/xml/volumes_client.py
@@ -60,6 +60,21 @@
         """Return the element 'attachment' from input volumes."""
         return volume['attachments']['attachment']
 
+    def _check_if_bootable(self, volume):
+        """
+        Check if the volume is bootable, also change the value
+        of 'bootable' from string to boolean.
+        """
+        if volume['bootable'] == 'True':
+            volume['bootable'] = True
+        elif volume['bootable'] == 'False':
+            volume['bootable'] = False
+        else:
+            raise ValueError(
+                'bootable flag is supposed to be either True or False,'
+                'it is %s' % volume['bootable'])
+        return volume
+
     def list_volumes(self, params=None):
         """List all the volumes created."""
         url = 'volumes'
@@ -72,6 +87,8 @@
         volumes = []
         if body is not None:
             volumes += [self._parse_volume(vol) for vol in list(body)]
+        for v in volumes:
+            v = self._check_if_bootable(v)
         return resp, volumes
 
     def list_volumes_with_detail(self, params=None):
@@ -86,14 +103,17 @@
         volumes = []
         if body is not None:
             volumes += [self._parse_volume(vol) for vol in list(body)]
+        for v in volumes:
+            v = self._check_if_bootable(v)
         return resp, volumes
 
     def get_volume(self, volume_id):
         """Returns the details of a single volume."""
         url = "volumes/%s" % str(volume_id)
         resp, body = self.get(url, self.headers)
-        body = etree.fromstring(body)
-        return resp, self._parse_volume(body)
+        body = self._parse_volume(etree.fromstring(body))
+        body = self._check_if_bootable(body)
+        return resp, body
 
     def create_volume(self, size, **kwargs):
         """Creates a new Volume.
@@ -131,6 +151,16 @@
         body = xml_to_json(etree.fromstring(body))
         return resp, body
 
+    def update_volume(self, volume_id, **kwargs):
+        """Updates the Specified Volume."""
+        put_body = Element("volume", xmlns=XMLNS_11, **kwargs)
+
+        resp, body = self.put('volumes/%s' % volume_id,
+                              str(Document(put_body)),
+                              self.headers)
+        body = xml_to_json(etree.fromstring(body))
+        return resp, body
+
     def delete_volume(self, volume_id):
         """Deletes the Specified Volume."""
         return self.delete("volumes/%s" % str(volume_id))
@@ -183,10 +213,11 @@
             body = xml_to_json(etree.fromstring(body))
         return resp, body
 
-    def upload_volume(self, volume_id, image_name):
+    def upload_volume(self, volume_id, image_name, disk_format):
         """Uploads a volume in Glance."""
         post_body = Element("os-volume_upload_image",
-                            image_name=image_name)
+                            image_name=image_name,
+                            disk_format=disk_format)
         url = 'volumes/%s/action' % str(volume_id)
         resp, body = self.post(url, str(Document(post_body)), self.headers)
         volume = xml_to_json(etree.fromstring(body))
diff --git a/tempest/stress/stressaction.py b/tempest/stress/stressaction.py
index 28251af..45a628d 100644
--- a/tempest/stress/stressaction.py
+++ b/tempest/stress/stressaction.py
@@ -42,7 +42,7 @@
 
     def setUp(self, **kwargs):
         """This method is called before the run method
-        to help the test initiatlize any structures.
+        to help the test initialize any structures.
         kwargs contains arguments passed in from the
         configuration json file.
 
@@ -59,7 +59,7 @@
     def execute(self, shared_statistic):
         """This is the main execution entry point called
         by the driver.   We register a signal handler to
-        allow us to gracefull tearDown, and then exit.
+        allow us to tearDown gracefully, and then exit.
         We also keep track of how many runs we do.
         """
         signal.signal(signal.SIGHUP, self._shutdown_handler)
diff --git a/tempest/tests/README.rst b/tempest/tests/README.rst
index 4098686..33d321f 100644
--- a/tempest/tests/README.rst
+++ b/tempest/tests/README.rst
@@ -1,5 +1,5 @@
-Tempest Guide to Unit tests
-===========================
+Tempest Field Guide to Unit tests
+=================================
 
 What are these tests?
 ---------------------
diff --git a/tempest/tests/test_wrappers.py b/tempest/tests/test_wrappers.py
index aeea98d..1a5af00 100644
--- a/tempest/tests/test_wrappers.py
+++ b/tempest/tests/test_wrappers.py
@@ -60,7 +60,7 @@
         subprocess.call(['git', 'init'])
         exit_code = subprocess.call('sh pretty_tox.sh tests.passing',
                                     shell=True, stdout=DEVNULL, stderr=DEVNULL)
-        self.assertEquals(exit_code, 0)
+        self.assertEqual(exit_code, 0)
 
     @attr(type='smoke')
     def test_pretty_tox_fails(self):
@@ -76,7 +76,7 @@
         subprocess.call(['git', 'init'])
         exit_code = subprocess.call('sh pretty_tox.sh', shell=True,
                                     stdout=DEVNULL, stderr=DEVNULL)
-        self.assertEquals(exit_code, 1)
+        self.assertEqual(exit_code, 1)
 
     @attr(type='smoke')
     def test_pretty_tox_serial(self):
@@ -88,7 +88,7 @@
         os.chdir(self.directory)
         exit_code = subprocess.call('sh pretty_tox_serial.sh tests.passing',
                                     shell=True, stdout=DEVNULL, stderr=DEVNULL)
-        self.assertEquals(exit_code, 0)
+        self.assertEqual(exit_code, 0)
 
     @attr(type='smoke')
     def test_pretty_tox_serial_fails(self):
@@ -100,4 +100,4 @@
         os.chdir(self.directory)
         exit_code = subprocess.call('sh pretty_tox_serial.sh', shell=True,
                                     stdout=DEVNULL, stderr=DEVNULL)
-        self.assertEquals(exit_code, 1)
+        self.assertEqual(exit_code, 1)
diff --git a/tempest/thirdparty/README.rst b/tempest/thirdparty/README.rst
index b775817..53cb54b 100644
--- a/tempest/thirdparty/README.rst
+++ b/tempest/thirdparty/README.rst
@@ -1,5 +1,5 @@
-Tempest Guide to Third Party API tests
-======================================
+Tempest Field Guide to Third Party API tests
+============================================
 
 
 What are these tests?
diff --git a/tempest/thirdparty/boto/test_ec2_instance_run.py b/tempest/thirdparty/boto/test_ec2_instance_run.py
index a848fc9..7fab364 100644
--- a/tempest/thirdparty/boto/test_ec2_instance_run.py
+++ b/tempest/thirdparty/boto/test_ec2_instance_run.py
@@ -176,25 +176,25 @@
             instance.add_tag('key1', value='value1')
 
         tags = self.ec2_client.get_all_tags()
-        self.assertEquals(tags[0].name, 'key1')
-        self.assertEquals(tags[0].value, 'value1')
+        self.assertEqual(tags[0].name, 'key1')
+        self.assertEqual(tags[0].value, 'value1')
 
         tags = self.ec2_client.get_all_tags(filters={'key': 'key1'})
-        self.assertEquals(tags[0].name, 'key1')
-        self.assertEquals(tags[0].value, 'value1')
+        self.assertEqual(tags[0].name, 'key1')
+        self.assertEqual(tags[0].value, 'value1')
 
         tags = self.ec2_client.get_all_tags(filters={'value': 'value1'})
-        self.assertEquals(tags[0].name, 'key1')
-        self.assertEquals(tags[0].value, 'value1')
+        self.assertEqual(tags[0].name, 'key1')
+        self.assertEqual(tags[0].value, 'value1')
 
         tags = self.ec2_client.get_all_tags(filters={'key': 'value2'})
-        self.assertEquals(len(tags), 0)
+        self.assertEqual(len(tags), 0)
 
         for instance in reservation.instances:
             instance.remove_tag('key1', value='value1')
 
         tags = self.ec2_client.get_all_tags()
-        self.assertEquals(len(tags), 0)
+        self.assertEqual(len(tags), 0)
 
         for instance in reservation.instances:
             instance.stop()
diff --git a/tempest/thirdparty/boto/utils/wait.py b/tempest/thirdparty/boto/utils/wait.py
index 1507deb..a44e283 100644
--- a/tempest/thirdparty/boto/utils/wait.py
+++ b/tempest/thirdparty/boto/utils/wait.py
@@ -54,8 +54,7 @@
             raise TestCase.failureException("State change timeout exceeded!"
                                             '(%ds) While waiting'
                                             'for %s at "%s"' %
-                                            (dtime,
-                                            final_set, status))
+                                            (dtime, final_set, status))
         time.sleep(default_check_interval)
         old_status = status
         status = lfunction()
@@ -78,8 +77,7 @@
             raise TestCase.failureException('Pattern find timeout exceeded!'
                                             '(%ds) While waiting for'
                                             '"%s" pattern in "%s"' %
-                                            (dtime,
-                                            regexp, text))
+                                            (dtime, regexp, text))
         time.sleep(default_check_interval)
 
 
diff --git a/test-requirements.txt b/test-requirements.txt
index 6c313ca..1ede25e 100644
--- a/test-requirements.txt
+++ b/test-requirements.txt
@@ -2,3 +2,4 @@
 # needed for doc build
 docutils==0.9.1
 sphinx>=1.1.2
+python-subunit
diff --git a/tools/install_venv.py b/tools/install_venv.py
index 1664b35..f37e0cd 100644
--- a/tools/install_venv.py
+++ b/tools/install_venv.py
@@ -56,7 +56,7 @@
 
     Also, make test will automatically use the virtualenv.
     """
-    print help
+    print(help)
 
 
 def main(argv):
diff --git a/tools/install_venv_common.py b/tools/install_venv_common.py
index f428c1e..0999e2c 100644
--- a/tools/install_venv_common.py
+++ b/tools/install_venv_common.py
@@ -114,9 +114,10 @@
         print('Installing dependencies with pip (this can take a while)...')
 
         # First things first, make sure our venv has the latest pip and
-        # setuptools.
-        self.pip_install('pip>=1.3')
+        # setuptools and pbr
+        self.pip_install('pip>=1.4')
         self.pip_install('setuptools')
+        self.pip_install('pbr')
 
         self.pip_install('-r', self.requirements)
         self.pip_install('-r', self.test_requirements)
@@ -201,12 +202,13 @@
         RHEL: https://bugzilla.redhat.com/958868
         """
 
-        # Install "patch" program if it's not there
-        if not self.check_pkg('patch'):
-            self.die("Please install 'patch'.")
+        if os.path.exists('contrib/redhat-eventlet.patch'):
+            # Install "patch" program if it's not there
+            if not self.check_pkg('patch'):
+                self.die("Please install 'patch'.")
 
-        # Apply the eventlet patch
-        self.apply_patch(os.path.join(self.venv, 'lib', self.py_version,
-                                      'site-packages',
-                                      'eventlet/green/subprocess.py'),
-                         'contrib/redhat-eventlet.patch')
+            # Apply the eventlet patch
+            self.apply_patch(os.path.join(self.venv, 'lib', self.py_version,
+                                          'site-packages',
+                                          'eventlet/green/subprocess.py'),
+                             'contrib/redhat-eventlet.patch')