diff --git a/.zuul.yaml b/.zuul.yaml
deleted file mode 100644
index c20f204..0000000
--- a/.zuul.yaml
+++ /dev/null
@@ -1,778 +0,0 @@
-- job:
-    name: devstack-tempest
-    parent: devstack
-    description: |
-      Base Tempest job.
-
-      This Tempest job provides the base for both the single and multi-node
-      test setup. To run a multi-node test inherit from devstack-tempest and
-      set the nodeset to a multi-node one.
-    required-projects: &base_required-projects
-      - opendev.org/openstack/tempest
-    timeout: 7200
-    roles: &base_roles
-      - zuul: opendev.org/openstack/devstack
-    vars: &base_vars
-      devstack_services:
-        tempest: true
-      devstack_local_conf:
-        test-config:
-          $TEMPEST_CONFIG:
-            compute:
-              min_compute_nodes: "{{ groups['compute'] | default(['controller']) | length }}"
-      test_results_stage_name: test_results
-      zuul_copy_output:
-        '{{ devstack_base_dir }}/tempest/etc/tempest.conf': logs
-        '{{ devstack_base_dir }}/tempest/etc/accounts.yaml': logs
-        '{{ devstack_base_dir }}/tempest/tempest.log': logs
-        '{{ stage_dir }}/{{ test_results_stage_name }}.subunit': logs
-        '{{ stage_dir }}/{{ test_results_stage_name }}.html': logs
-        '{{ stage_dir }}/stackviz': logs
-      extensions_to_txt:
-        conf: true
-        log: true
-        yaml: true
-        yml: true
-    run: playbooks/devstack-tempest.yaml
-    post-run: playbooks/post-tempest.yaml
-
-- job:
-    name: tempest-all
-    parent: devstack-tempest
-    description: |
-      Integration test that runs all tests.
-      Former name for this job was:
-        * legacy-periodic-tempest-dsvm-all-master
-    vars:
-      tox_envlist: all
-      tempest_test_regex: tempest
-      devstack_localrc:
-        ENABLE_FILE_INJECTION: true
-
-- job:
-    name: devstack-tempest-ipv6
-    parent: devstack-ipv6
-    description: |
-      Base Tempest IPv6 job. This job is derived from 'devstack-ipv6'
-      which set the IPv6-only setting for OpenStack services. As part of
-      run phase, this job will verify the IPv6 setting and check the services
-      endpoints and listen addresses are IPv6. Basically it will run the script
-      ./tool/verify-ipv6-only-deployments.sh
-
-      Child jobs of this job can run their own set of tests and can
-      add post-run playebooks to extend the IPv6 verification specific
-      to their deployed services.
-      Check the wiki page for more details about project jobs setup
-      - https://wiki.openstack.org/wiki/Goal-IPv6-only-deployments-and-testing
-    required-projects: *base_required-projects
-    timeout: 7200
-    roles: *base_roles
-    vars: *base_vars
-    run: playbooks/devstack-tempest-ipv6.yaml
-    post-run: playbooks/post-tempest.yaml
-
-- job:
-    name: tempest-ipv6-only
-    parent: devstack-tempest-ipv6
-    # This currently works from stable/pike on.
-    branches: ^(?!stable/ocata).*$
-    description: |
-      Integration test of IPv6-only deployments. This job runs
-      smoke and IPv6 relates tests only. Basic idea is to test
-      whether OpenStack Services listen on IPv6 addrress or not.
-    timeout: 10800
-    vars:
-      tox_envlist: ipv6-only
-
-- job:
-    name: tempest-full
-    parent: devstack-tempest
-    # This currently works from stable/pike on.
-    # Before stable/pike, legacy version of tempest-full
-    # 'legacy-tempest-dsvm-neutron-full' run.
-    branches: ^(?!stable/ocata).*$
-    description: |
-      Base integration test with Neutron networking and py27.
-      This job is supposed to run until stable/train setup only.
-      If you are running it on stable/ussuri gate onwards for python2.7
-      coverage then you need to do override-checkout with any stable
-      branch less than or equal to stable/train.
-      Former names for this job where:
-        * legacy-tempest-dsvm-neutron-full
-        * gate-tempest-dsvm-neutron-full-ubuntu-xenial
-    vars:
-      tox_envlist: full
-      devstack_localrc:
-        ENABLE_FILE_INJECTION: true
-        ENABLE_VOLUME_MULTIATTACH: true
-        USE_PYTHON3: False
-      devstack_services:
-        # NOTE(mriedem): Disable the cinder-backup service from tempest-full
-        # since tempest-full is in the integrated-gate project template but
-        # the backup tests do not really involve other services so they should
-        # be run in some more cinder-specific job, especially because the
-        # tests fail at a high rate (see bugs 1483434, 1813217, 1745168)
-        c-bak: false
-
-- job:
-    name: tempest-full-oslo-master
-    parent: tempest-full-py3
-    description: |
-      Integration test using current git of oslo libs.
-      This ensures that when oslo libs get released that they
-      do not break OpenStack server projects.
-
-      Former name for this job was
-      periodic-tempest-dsvm-oslo-latest-full-master.
-    timeout: 10800
-    required-projects:
-      - opendev.org/openstack/oslo.cache
-      - opendev.org/openstack/oslo.concurrency
-      - opendev.org/openstack/oslo.config
-      - opendev.org/openstack/oslo.context
-      - opendev.org/openstack/oslo.db
-      - opendev.org/openstack/oslo.i18n
-      - opendev.org/openstack/oslo.log
-      - opendev.org/openstack/oslo.messaging
-      - opendev.org/openstack/oslo.middleware
-      - opendev.org/openstack/oslo.policy
-      - opendev.org/openstack/oslo.privsep
-      - opendev.org/openstack/oslo.reports
-      - opendev.org/openstack/oslo.rootwrap
-      - opendev.org/openstack/oslo.serialization
-      - opendev.org/openstack/oslo.service
-      - opendev.org/openstack/oslo.utils
-      - opendev.org/openstack/oslo.versionedobjects
-      - opendev.org/openstack/oslo.vmware
-
-- job:
-    name: tempest-full-parallel
-    parent: tempest-full-py3
-    voting: false
-    branches:
-      - master
-    description: |
-      Base integration test with Neutron networking.
-      It includes all scenarios as it was in the past.
-      This job runs all scenario tests in parallel!
-    timeout: 9000
-    vars:
-      tox_envlist: full-parallel
-      run_tempest_cleanup: true
-      run_tempest_dry_cleanup: true
-
-- job:
-    name: tempest-full-py3
-    parent: devstack-tempest
-    # This currently works from stable/pike on.
-    # Before stable/pike, legacy version of tempest-full
-    # 'legacy-tempest-dsvm-neutron-full' run.
-    branches: ^(?!stable/ocata).*$
-    description: |
-      Base integration test with Neutron networking and py3.
-      Former names for this job where:
-        * legacy-tempest-dsvm-py35
-        * gate-tempest-dsvm-py35
-    vars:
-      tox_envlist: full
-      devstack_localrc:
-        USE_PYTHON3: true
-        FORCE_CONFIG_DRIVE: true
-        ENABLE_VOLUME_MULTIATTACH: true
-        GLANCE_USE_IMPORT_WORKFLOW: True
-      devstack_services:
-        s-account: false
-        s-container: false
-        s-object: false
-        s-proxy: false
-        # without Swift, c-bak cannot run (in the Gate at least)
-        # NOTE(mriedem): Disable the cinder-backup service from
-        # tempest-full-py3 since tempest-full-py3 is in the integrated-gate-py3
-        # project template but the backup tests do not really involve other
-        # services so they should be run in some more cinder-specific job,
-        # especially because the tests fail at a high rate (see bugs 1483434,
-        # 1813217, 1745168)
-        c-bak: false
-
-- job:
-    name: tempest-integrated-networking
-    parent: devstack-tempest
-    branches: ^(?!stable/ocata).*$
-    description: |
-      This  job runs integration tests for networking. This is subset of
-      'tempest-full-py3' job and run only Neutron and Nova related tests.
-      This is meant to be run on neutron gate only.
-    vars:
-      tox_envlist: integrated-network
-      devstack_localrc:
-        USE_PYTHON3: true
-        FORCE_CONFIG_DRIVE: true
-      devstack_services:
-        s-account: false
-        s-container: false
-        s-object: false
-        s-proxy: false
-        c-bak: false
-
-- job:
-    name: tempest-integrated-compute
-    parent: devstack-tempest
-    branches: ^(?!stable/ocata).*$
-    description: |
-      This job runs integration tests for compute. This is
-      subset of 'tempest-full-py3' job and run Nova, Neutron, Cinder (except backup tests)
-      and Glance related tests. This is meant to be run on Nova gate only.
-    vars:
-      tox_envlist: integrated-compute
-      tempest_black_regex: ""
-      devstack_localrc:
-        USE_PYTHON3: true
-        FORCE_CONFIG_DRIVE: true
-        ENABLE_VOLUME_MULTIATTACH: true
-      devstack_services:
-        s-account: false
-        s-container: false
-        s-object: false
-        s-proxy: false
-        c-bak: false
-
-- job:
-    name: tempest-integrated-placement
-    parent: devstack-tempest
-    branches: ^(?!stable/ocata).*$
-    description: |
-      This job runs integration tests for placement. This is
-      subset of 'tempest-full-py3' job and run Nova and Neutron
-      related tests. This is meant to be run on Placement gate only.
-    vars:
-      tox_envlist: integrated-placement
-      devstack_localrc:
-        USE_PYTHON3: true
-        FORCE_CONFIG_DRIVE: true
-        ENABLE_VOLUME_MULTIATTACH: true
-      devstack_services:
-        s-account: false
-        s-container: false
-        s-object: false
-        s-proxy: false
-        c-bak: false
-
-- job:
-    name: tempest-integrated-storage
-    parent: devstack-tempest
-    branches: ^(?!stable/ocata).*$
-    description: |
-      This job runs integration tests for image & block storage. This is
-      subset of 'tempest-full-py3' job and run Cinder, Glance, Swift and Nova
-      related tests. This is meant to be run on Cinder and Glance gate only.
-    vars:
-      tox_envlist: integrated-storage
-      devstack_localrc:
-        USE_PYTHON3: true
-        FORCE_CONFIG_DRIVE: true
-        ENABLE_VOLUME_MULTIATTACH: true
-        GLANCE_USE_IMPORT_WORKFLOW: True
-
-- job:
-    name: tempest-integrated-object-storage
-    parent: devstack-tempest
-    branches: ^(?!stable/ocata).*$
-    description: |
-      This job runs integration tests for object storage. This is
-      subset of 'tempest-full-py3' job and run Swift, Cinder and Glance
-      related tests. This is meant to be run on Swift gate only.
-    vars:
-      tox_envlist: integrated-object-storage
-      devstack_localrc:
-        # NOTE(gmann): swift is not ready on python3 yet and devstack
-        # install it on python2.7 only. But settting the USE_PYTHON3
-        # for future once swift is ready on py3.
-        USE_PYTHON3: true
-
-- job:
-    name: tempest-full-py3-ipv6
-    parent: devstack-tempest-ipv6
-    branches: ^(?!stable/ocata).*$
-    description: |
-      Base integration test with Neutron networking, IPv6 and py3.
-    vars:
-      tox_envlist: full
-      devstack_localrc:
-        USE_PYTHON3: true
-        FORCE_CONFIG_DRIVE: true
-      devstack_services:
-        s-account: false
-        s-container: false
-        s-object: false
-        s-proxy: false
-        # without Swift, c-bak cannot run (in the Gate at least)
-        c-bak: false
-
-- job:
-    name: tempest-multinode-full-base
-    parent: devstack-tempest
-    description: |
-      Base multinode integration test with Neutron networking and py27.
-      Former names for this job were:
-        * neutron-tempest-multinode-full
-        * legacy-tempest-dsvm-neutron-multinode-full
-        * gate-tempest-dsvm-neutron-multinode-full-ubuntu-xenial-nv
-      This job includes two nodes, controller / tempest plus a subnode, but
-      it can be used with different topologies, as long as a controller node
-      and a tempest one exist.
-    timeout: 10800
-    vars:
-      tox_envlist: full
-      devstack_localrc:
-        FORCE_CONFIG_DRIVE: false
-        NOVA_ALLOW_MOVE_TO_SAME_HOST: false
-        LIVE_MIGRATION_AVAILABLE: true
-        USE_BLOCK_MIGRATION_FOR_LIVE_MIGRATION: true
-    group-vars:
-      peers:
-        devstack_localrc:
-          NOVA_ALLOW_MOVE_TO_SAME_HOST: false
-          LIVE_MIGRATION_AVAILABLE: true
-          USE_BLOCK_MIGRATION_FOR_LIVE_MIGRATION: true
-
-- job:
-    name: tempest-multinode-full
-    parent: tempest-multinode-full-base
-    nodeset: openstack-two-node-focal
-    # This job runs on Focal from stable/victoria on.
-    branches: ^(?!stable/(ocata|pike|queens|rocky|stein|train|ussuri)).*$
-    vars:
-      devstack_localrc:
-        USE_PYTHON3: False
-    group-vars:
-      subnode:
-        devstack_localrc:
-          USE_PYTHON3: False
-
-- job:
-    name: tempest-multinode-full
-    parent: tempest-multinode-full-base
-    nodeset: openstack-two-node-bionic
-    # This job runs on Bionic and on python2. This is for stable/stein and stable/train.
-    # This job is prepared to make sure all stable branches from stable/stein till stable/train
-    # will keep running on bionic. This can be removed once stable/train is EOL.
-    branches:
-      - stable/stein
-      - stable/train
-      - stable/ussuri
-    vars:
-      devstack_localrc:
-        USE_PYTHON3: False
-    group-vars:
-      subnode:
-        devstack_localrc:
-          USE_PYTHON3: False
-
-- job:
-    name: tempest-multinode-full
-    parent: tempest-multinode-full-base
-    nodeset: openstack-two-node-xenial
-    # This job runs on Xenial and this is for stable/pike, stable/queens
-    # and stable/rocky. This job is prepared to make sure all stable branches
-    # before stable/stein will keep running on xenial. This job can be
-    # removed once stable/rocky is EOL.
-    branches:
-      - stable/pike
-      - stable/queens
-      - stable/rocky
-    vars:
-      devstack_localrc:
-        USE_PYTHON3: False
-    group-vars:
-      subnode:
-        devstack_localrc:
-          USE_PYTHON3: False
-
-- job:
-    name: tempest-multinode-full-py3
-    parent: tempest-multinode-full
-    vars:
-      devstack_localrc:
-        USE_PYTHON3: true
-    group-vars:
-      subnode:
-        devstack_localrc:
-          USE_PYTHON3: true
-
-- job:
-    name: tempest-full-py3-opensuse15
-    parent: tempest-full-py3
-    nodeset: devstack-single-node-opensuse-15
-    description: |
-      Base integration test with Neutron networking and py36 running
-      on openSUSE Leap 15.x
-    voting: false
-
-- job:
-    name: tempest-slow
-    parent: tempest-multinode-full
-    description: |
-      This multinode integration job will run all the tests tagged as slow.
-      It enables the lvm multibackend setup to cover few scenario tests.
-      This job will run only slow tests (API or Scenario) serially.
-
-      Former names for this job were:
-        * legacy-tempest-dsvm-neutron-scenario-multinode-lvm-multibackend
-        * tempest-scenario-multinode-lvm-multibackend
-    timeout: 10800
-    vars:
-      tox_envlist: slow-serial
-      devstack_localrc:
-        CINDER_ENABLED_BACKENDS: lvm:lvmdriver-1,lvm:lvmdriver-2
-        ENABLE_VOLUME_MULTIATTACH: true
-      devstack_plugins:
-        neutron: https://opendev.org/openstack/neutron
-      devstack_services:
-        neutron-placement: true
-        neutron-qos: true
-      devstack_local_conf:
-        post-config:
-          "/$NEUTRON_CORE_PLUGIN_CONF":
-            ovs:
-              bridge_mappings: public:br-ex
-              resource_provider_bandwidths: br-ex:1000000:1000000
-        test-config:
-          $TEMPEST_CONFIG:
-            network-feature-enabled:
-              qos_placement_physnet: public
-      tempest_concurrency: 2
-    group-vars:
-      # NOTE(mriedem): The ENABLE_VOLUME_MULTIATTACH variable is used on both
-      # the controller and subnode prior to Rocky so we have to make sure the
-      # variable is set in both locations.
-      subnode:
-        devstack_localrc:
-          ENABLE_VOLUME_MULTIATTACH: true
-
-- job:
-    name: tempest-slow-py3
-    parent: tempest-slow
-    vars:
-      devstack_localrc:
-        USE_PYTHON3: true
-      devstack_services:
-        s-account: false
-        s-container: false
-        s-object: false
-        s-proxy: false
-        # without Swift, c-bak cannot run (in the Gate at least)
-        c-bak: false
-    group-vars:
-      subnode:
-        devstack_localrc:
-          USE_PYTHON3: true
-
-- job:
-    name: tempest-full-victoria-py3
-    parent: tempest-full-py3
-    override-checkout: stable/victoria
-
-- job:
-    name: tempest-full-ussuri-py3
-    parent: tempest-full-py3
-    nodeset: openstack-single-node-bionic
-    override-checkout: stable/ussuri
-
-- job:
-    name: tempest-full-train-py3
-    parent: tempest-full-py3
-    nodeset: openstack-single-node-bionic
-    override-checkout: stable/train
-
-- job:
-    name: tempest-full-stein-py3
-    parent: tempest-full-py3
-    nodeset: openstack-single-node-bionic
-    override-checkout: stable/stein
-
-- job:
-    name: tempest-tox-plugin-sanity-check
-    parent: tox
-    description: |
-      Run tempest plugin sanity check script using tox.
-    nodeset: ubuntu-focal
-    vars:
-      tox_envlist: plugin-sanity-check
-    timeout: 5000
-
-- job:
-    name: tempest-cinder-v2-api
-    parent: devstack-tempest
-    branches:
-      - master
-    description: |
-      This job runs the cinder API test against v2 endpoint.
-    vars:
-      tox_envlist: all
-      tempest_test_regex: api.*volume
-      devstack_localrc:
-        TEMPEST_VOLUME_TYPE: volumev2
-
-- job:
-    name: tempest-full-test-account-py3
-    parent: tempest-full-py3
-    description: |
-      This job runs the full set of tempest tests using pre-provisioned
-      credentials instead of dynamic credentials and py3.
-      Former names for this job were:
-        - legacy-tempest-dsvm-full-test-accounts
-        - legacy-tempest-dsvm-neutron-full-test-accounts
-        - legacy-tempest-dsvm-identity-v3-test-accounts
-    vars:
-      devstack_localrc:
-        TEMPEST_USE_TEST_ACCOUNTS: True
-
-- job:
-    name: tempest-full-test-account-no-admin-py3
-    parent: tempest-full-test-account-py3
-    description: |
-      This job runs the full set of tempest tests using pre-provisioned
-      credentials and py3 without having an admin account.
-      Former name for this job was:
-        - legacy-tempest-dsvm-neutron-full-non-admin
-
-    vars:
-      devstack_localrc:
-        TEMPEST_HAS_ADMIN: False
-
-- job:
-    name: tempest-pg-full
-    parent: tempest-full-py3
-    description: |
-      Base integration test with Neutron networking and PostgreSQL.
-      Former name for this job was legacy-tempest-dsvm-neutron-pg-full.
-    vars:
-      devstack_localrc:
-        ENABLE_FILE_INJECTION: true
-        DATABASE_TYPE: postgresql
-
-- project-template:
-    name: integrated-gate-networking
-    description: |
-      Run the python3 Tempest network integration tests (Nova and Neutron related)
-      in check and gate for the neutron integrated gate. This is meant to be
-      run on neutron gate only.
-    check:
-      jobs:
-        - grenade
-        - tempest-integrated-networking
-    gate:
-      jobs:
-        - grenade
-        - tempest-integrated-networking
-
-- project-template:
-    name: integrated-gate-compute
-    description: |
-      Run the python3 Tempest compute integration tests
-      (Nova, Neutron, Cinder and Glance related) in check and gate
-      for the Nova integrated gate. This is meant to be
-      run on Nova gate only.
-    check:
-      jobs:
-        - grenade
-        - tempest-integrated-compute
-    gate:
-      jobs:
-        - grenade
-        - tempest-integrated-compute
-
-- project-template:
-    name: integrated-gate-placement
-    description: |
-      Run the python3 Tempest placement integration tests
-      (Nova and Neutron related) in check and gate
-      for the Placement integrated gate. This is meant to be
-      run on Placement gate only.
-    check:
-      jobs:
-        - grenade
-        - tempest-integrated-placement
-    gate:
-      jobs:
-        - grenade
-        - tempest-integrated-placement
-
-- project-template:
-    name: integrated-gate-storage
-    description: |
-      Run the python3 Tempest image & block storage integration tests
-      (Cinder, Glance, Swift and Nova related) in check and gate
-      for the neutron integrated gate. This is meant to be
-      run on Cinder and Glance gate only.
-    check:
-      jobs:
-        - grenade
-        - tempest-integrated-storage
-    gate:
-      jobs:
-        - grenade
-        - tempest-integrated-storage
-
-- project-template:
-    name: integrated-gate-object-storage
-    description: |
-      Run the python3 Tempest object storage integration tests
-      (Swift, Cinder and Glance related) in check and gate
-      for the swift integrated gate. This is meant to be
-      run on swift gate only.
-    check:
-      jobs:
-        - grenade
-        - tempest-integrated-object-storage
-    gate:
-      jobs:
-        - grenade
-        - tempest-integrated-object-storage
-
-- project:
-    templates:
-      - check-requirements
-      - integrated-gate-py3
-      - openstack-cover-jobs
-      - openstack-python3-victoria-jobs
-      - publish-openstack-docs-pti
-      - release-notes-jobs-python3
-    check:
-      jobs:
-        - devstack-tempest:
-            files:
-              - ^playbooks/
-              - ^roles/
-              - ^.zuul.yaml$
-        - devstack-tempest-ipv6:
-            voting: false
-            files:
-              - ^playbooks/
-              - ^roles/
-              - ^.zuul.yaml$
-        - tempest-full-parallel:
-            # Define list of irrelevant files to use everywhere else
-            irrelevant-files: &tempest-irrelevant-files
-              - ^.*\.rst$
-              - ^doc/.*$
-              - ^etc/.*$
-              - ^releasenotes/.*$
-              - ^setup.cfg$
-              - ^tempest/hacking/.*$
-              - ^tempest/tests/.*$
-              - ^tools/.*$
-              - ^.coveragerc$
-              - ^.gitignore$
-              - ^.gitreview$
-              - ^.mailmap$
-        - tempest-full-py3:
-            irrelevant-files: *tempest-irrelevant-files
-        - tempest-full-py3-ipv6:
-            voting: false
-            irrelevant-files: *tempest-irrelevant-files
-        - glance-multistore-cinder-import:
-            voting: false
-            irrelevant-files: *tempest-irrelevant-files
-        - tempest-full-victoria-py3:
-            irrelevant-files: *tempest-irrelevant-files
-        - tempest-full-ussuri-py3:
-            irrelevant-files: *tempest-irrelevant-files
-        - tempest-full-train-py3:
-            irrelevant-files: *tempest-irrelevant-files
-        - tempest-full-stein-py3:
-            irrelevant-files: *tempest-irrelevant-files
-        - tempest-multinode-full-py3:
-            irrelevant-files: *tempest-irrelevant-files
-        - tempest-tox-plugin-sanity-check:
-            irrelevant-files: &tempest-irrelevant-files-2
-              - ^.*\.rst$
-              - ^doc/.*$
-              - ^etc/.*$
-              - ^releasenotes/.*$
-              - ^setup.cfg$
-              - ^tempest/hacking/.*$
-              - ^tempest/tests/.*$
-              - ^.coveragerc$
-              - ^.gitignore$
-              - ^.gitreview$
-              - ^.mailmap$
-              # tools/ is not here since this relies on a script in tools/.
-        - tempest-ipv6-only:
-            irrelevant-files: *tempest-irrelevant-files-2
-        - tempest-slow-py3:
-            irrelevant-files: *tempest-irrelevant-files
-        - nova-live-migration:
-            voting: false
-            irrelevant-files: *tempest-irrelevant-files
-        - devstack-plugin-ceph-tempest-py3:
-            irrelevant-files: *tempest-irrelevant-files
-        - neutron-grenade-multinode:
-            irrelevant-files: *tempest-irrelevant-files
-        - grenade:
-            irrelevant-files: *tempest-irrelevant-files
-        - puppet-openstack-integration-4-scenario001-tempest-centos-7:
-            voting: false
-            irrelevant-files: *tempest-irrelevant-files
-        - puppet-openstack-integration-4-scenario002-tempest-centos-7:
-            voting: false
-            irrelevant-files: *tempest-irrelevant-files
-        - puppet-openstack-integration-4-scenario003-tempest-centos-7:
-            voting: false
-            irrelevant-files: *tempest-irrelevant-files
-        - puppet-openstack-integration-4-scenario004-tempest-centos-7:
-            voting: false
-            irrelevant-files: *tempest-irrelevant-files
-        - neutron-tempest-dvr:
-            voting: false
-            irrelevant-files: *tempest-irrelevant-files
-        - interop-tempest-consistency:
-            irrelevant-files: *tempest-irrelevant-files
-        - tempest-full-test-account-py3:
-            voting: false
-            irrelevant-files: *tempest-irrelevant-files
-        - tempest-full-test-account-no-admin-py3:
-            voting: false
-            irrelevant-files: *tempest-irrelevant-files
-        - openstack-tox-bashate:
-            irrelevant-files: *tempest-irrelevant-files-2
-    gate:
-      jobs:
-        - tempest-slow-py3:
-            irrelevant-files: *tempest-irrelevant-files
-        - neutron-grenade-multinode:
-            irrelevant-files: *tempest-irrelevant-files
-        - tempest-full-py3:
-            irrelevant-files: *tempest-irrelevant-files
-        - grenade:
-            irrelevant-files: *tempest-irrelevant-files
-        - tempest-ipv6-only:
-            irrelevant-files: *tempest-irrelevant-files-2
-        - devstack-plugin-ceph-tempest-py3:
-            irrelevant-files: *tempest-irrelevant-files
-    experimental:
-      jobs:
-        - tempest-cinder-v2-api:
-            irrelevant-files: *tempest-irrelevant-files
-        - tempest-all:
-            irrelevant-files: *tempest-irrelevant-files
-        - neutron-tempest-dvr-ha-multinode-full:
-            irrelevant-files: *tempest-irrelevant-files
-        - nova-tempest-v2-api:
-            irrelevant-files: *tempest-irrelevant-files
-        - cinder-tempest-lvm-multibackend:
-            irrelevant-files: *tempest-irrelevant-files
-        - tempest-pg-full:
-            irrelevant-files: *tempest-irrelevant-files
-        - tempest-full-py3-opensuse15:
-            irrelevant-files: *tempest-irrelevant-files
-    periodic-stable:
-      jobs:
-        - tempest-full-victoria-py3
-        - tempest-full-ussuri-py3
-        - tempest-full-train-py3
-        - tempest-full-stein-py3
-    periodic:
-      jobs:
-        - tempest-all
-        - tempest-full-oslo-master
diff --git a/doc/source/microversion_testing.rst b/doc/source/microversion_testing.rst
index c7004dd..c1981f9 100644
--- a/doc/source/microversion_testing.rst
+++ b/doc/source/microversion_testing.rst
@@ -126,16 +126,16 @@
 
 .. code-block:: python
 
-    class BaseTestCase1(api_version_utils.BaseMicroversionTest):
+   class BaseTestCase1(api_version_utils.BaseMicroversionTest):
 
-        [..]
-    @classmethod
-    def skip_checks(cls):
-        super(BaseTestCase1, cls).skip_checks()
-        api_version_utils.check_skip_with_microversion(cls.min_microversion,
-                                                       cls.max_microversion,
-                                                       CONF.compute.min_microversion,
-                                                       CONF.compute.max_microversion)
+       [..]
+       @classmethod
+       def skip_checks(cls):
+           super(BaseTestCase1, cls).skip_checks()
+           api_version_utils.check_skip_with_microversion(cls.min_microversion,
+                                                          cls.max_microversion,
+                                                          CONF.compute.min_microversion,
+                                                          CONF.compute.max_microversion)
 
 Skip logic can be added in tests base class or any specific test class depends on
 tests class structure.
diff --git a/doc/source/plugins/plugin.rst b/doc/source/plugins/plugin.rst
index ab1b0b1..6726def 100644
--- a/doc/source/plugins/plugin.rst
+++ b/doc/source/plugins/plugin.rst
@@ -268,12 +268,12 @@
 
    class MyAPIClient(rest_client.RestClient):
 
-    def __init__(self, auth_provider, service, region,
-                 my_arg, my_arg2=True, **kwargs):
-        super(MyAPIClient, self).__init__(
-            auth_provider, service, region, **kwargs)
-        self.my_arg = my_arg
-        self.my_args2 = my_arg
+       def __init__(self, auth_provider, service, region,
+                    my_arg, my_arg2=True, **kwargs):
+           super(MyAPIClient, self).__init__(
+               auth_provider, service, region, **kwargs)
+           self.my_arg = my_arg
+           self.my_args2 = my_arg
 
 Finally the service client should be structured in a python module, so that all
 service client classes are importable from it. Each major API version should
diff --git a/doc/source/write_tests.rst b/doc/source/write_tests.rst
index 0a29b7b..34df089 100644
--- a/doc/source/write_tests.rst
+++ b/doc/source/write_tests.rst
@@ -76,54 +76,54 @@
 
   class TestExampleCase(test.BaseTestCase):
 
-    @classmethod
-    def skip_checks(cls):
-        """This section is used to evaluate config early and skip all test
-           methods based on these checks
-        """
-        super(TestExampleCase, cls).skip_checks()
-        if not CONF.section.foo
-            cls.skip('A helpful message')
+      @classmethod
+      def skip_checks(cls):
+          """This section is used to evaluate config early and skip all test
+             methods based on these checks
+          """
+          super(TestExampleCase, cls).skip_checks()
+          if not CONF.section.foo
+              cls.skip('A helpful message')
 
-    @classmethod
-    def setup_credentials(cls):
-        """This section is used to do any manual credential allocation and also
-           in the case of dynamic credentials to override the default network
-           resource creation/auto allocation
-        """
-        # This call is used to tell the credential allocator to not create any
-        # network resources for this test case. It also enables selective
-        # creation of other neutron resources. NOTE: it must go before the
-        # super call
-        cls.set_network_resources()
-        super(TestExampleCase, cls).setup_credentials()
+      @classmethod
+      def setup_credentials(cls):
+          """This section is used to do any manual credential allocation and also
+             in the case of dynamic credentials to override the default network
+             resource creation/auto allocation
+          """
+          # This call is used to tell the credential allocator to not create any
+          # network resources for this test case. It also enables selective
+          # creation of other neutron resources. NOTE: it must go before the
+          # super call
+          cls.set_network_resources()
+          super(TestExampleCase, cls).setup_credentials()
 
-    @classmethod
-    def setup_clients(cls):
-        """This section is used to setup client aliases from the manager object
-           or to initialize any additional clients. Except in a few very
-           specific situations you should not need to use this.
-        """
-        super(TestExampleCase, cls).setup_clients()
-        cls.servers_client = cls.os_primary.servers_client
+      @classmethod
+      def setup_clients(cls):
+          """This section is used to setup client aliases from the manager object
+             or to initialize any additional clients. Except in a few very
+             specific situations you should not need to use this.
+          """
+          super(TestExampleCase, cls).setup_clients()
+          cls.servers_client = cls.os_primary.servers_client
 
-    @classmethod
-    def resource_setup(cls):
-        """This section is used to create any resources or objects which are
-           going to be used and shared by **all** test methods in the
-           TestCase. Note then anything created in this section must also be
-           destroyed in the corresponding resource_cleanup() method (which will
-           be run during tearDownClass())
-        """
-        super(TestExampleCase, cls).resource_setup()
-        cls.shared_server = cls.servers_client.create_server(...)
-        cls.addClassResourceCleanup(waiters.wait_for_server_termination,
-                                    cls.servers_client,
-                                    cls.shared_server['id'])
-        cls.addClassResourceCleanup(
-            test_utils.call_and_ignore_notfound_exc(
-                cls.servers_client.delete_server,
-                cls.shared_server['id']))
+      @classmethod
+      def resource_setup(cls):
+          """This section is used to create any resources or objects which are
+             going to be used and shared by **all** test methods in the
+             TestCase. Note then anything created in this section must also be
+             destroyed in the corresponding resource_cleanup() method (which will
+             be run during tearDownClass())
+          """
+          super(TestExampleCase, cls).resource_setup()
+          cls.shared_server = cls.servers_client.create_server(...)
+          cls.addClassResourceCleanup(waiters.wait_for_server_termination,
+                                      cls.servers_client,
+                                      cls.shared_server['id'])
+          cls.addClassResourceCleanup(
+              test_utils.call_and_ignore_notfound_exc(
+                  cls.servers_client.delete_server,
+                  cls.shared_server['id']))
 
 .. _credentials:
 
@@ -150,9 +150,9 @@
 
         credentials = ['primary', 'admin']
 
-    @classmethod
-    def skip_checks(cls):
-    ...
+        @classmethod
+        def skip_checks(cls):
+            ...
 
 In this example the ``TestExampleAdmin`` TestCase will allocate 2 sets of
 credentials, one regular user and one admin user. The corresponding manager
@@ -225,10 +225,10 @@
 
   class TestExampleCase(test.BaseTestCase):
 
-  @classmethod
-  def setup_credentials(cls):
-      cls.set_network_resources(network=True, subnet=True, router=False)
-      super(TestExampleCase, cls).setup_credentials()
+      @classmethod
+      def setup_credentials(cls):
+          cls.set_network_resources(network=True, subnet=True, router=False)
+          super(TestExampleCase, cls).setup_credentials()
 
 There are 2 quirks with the usage here. First for the set_network_resources
 function to work properly it **must be called before super()**. This is so
@@ -242,10 +242,10 @@
 
   class TestExampleCase(test.BaseTestCase):
 
-  @classmethod
-  def setup_credentials(cls):
-      cls.set_network_resources()
-      super(TestExampleCase, cls).setup_credentials()
+      @classmethod
+      def setup_credentials(cls):
+          cls.set_network_resources()
+          super(TestExampleCase, cls).setup_credentials()
 
 This will not allocate any networking resources. This is because by default all
 the arguments default to False.
@@ -282,8 +282,8 @@
 
 
   class TestExampleCase(test.BaseTestCase):
-    def test_example_create_server(self):
-      self.os_primary.servers_client.create_server(...)
+      def test_example_create_server(self):
+          self.os_primary.servers_client.create_server(...)
 
 is all you need to do. As described previously, in the above example the
 ``self.os_primary`` is created automatically because the base test class sets the
@@ -305,8 +305,8 @@
 
 
   class TestExampleCase(test.BaseTestCase):
-    def test_example_create_server(self):
-      credentials = self.os_primary.credentials
+      def test_example_create_server(self):
+          credentials = self.os_primary.credentials
 
 The credentials object provides access to all of the credential information you
 would need to make API requests. For example, building off the previous
@@ -316,9 +316,9 @@
 
 
   class TestExampleCase(test.BaseTestCase):
-    def test_example_create_server(self):
-      credentials = self.os_primary.credentials
-      username = credentials.username
-      user_id = credentials.user_id
-      password = credentials.password
-      tenant_id = credentials.tenant_id
+      def test_example_create_server(self):
+          credentials = self.os_primary.credentials
+          username = credentials.username
+          user_id = credentials.user_id
+          password = credentials.password
+          tenant_id = credentials.tenant_id
diff --git a/releasenotes/notes/associate-disassociate-floating_ip-0b6cfebeef1304b0.yaml b/releasenotes/notes/associate-disassociate-floating_ip-0b6cfebeef1304b0.yaml
new file mode 100644
index 0000000..8e42e85
--- /dev/null
+++ b/releasenotes/notes/associate-disassociate-floating_ip-0b6cfebeef1304b0.yaml
@@ -0,0 +1,5 @@
+---
+features:
+  - |
+    Added associate_floating_ip() and dissociate_floating_ip() methods
+    to the scenario manager.
diff --git a/tempest/api/compute/admin/test_volume.py b/tempest/api/compute/admin/test_volume.py
index 9340997..342380e 100644
--- a/tempest/api/compute/admin/test_volume.py
+++ b/tempest/api/compute/admin/test_volume.py
@@ -112,7 +112,5 @@
             server['id'], attachment['volumeId'])
         waiters.wait_for_volume_resource_status(
             self.volumes_client, attachment['volumeId'], 'available')
-        volume_after_detach = self.servers_client.list_volume_attachments(
-            server['id'])['volumeAttachments']
-        self.assertEqual(0, len(volume_after_detach),
-                         "Failed to detach volume")
+        waiters.wait_for_volume_attachment_remove_from_server(
+            self.servers_client, server['id'], attachment['volumeId'])
diff --git a/tempest/api/compute/servers/test_attach_interfaces.py b/tempest/api/compute/servers/test_attach_interfaces.py
index 0601bbe..102792e 100644
--- a/tempest/api/compute/servers/test_attach_interfaces.py
+++ b/tempest/api/compute/servers/test_attach_interfaces.py
@@ -427,3 +427,33 @@
                 CONF.compute.build_interval, original_ip_count):
             raise lib_exc.TimeoutException(
                 'Timed out while waiting for IP count to decrease.')
+
+
+class AttachInterfacesV270Test(AttachInterfacesTestBase):
+    """Test interface API with microversion greater than 2.69"""
+    min_microversion = '2.70'
+
+    @decorators.idempotent_id('2853f095-8277-4067-92bd-9f10bd4f8e0c')
+    @utils.services('network')
+    def test_create_get_list_interfaces(self):
+        """Test interface API with microversion greater than 2.69
+
+        Checking create, get, list interface APIs response schema.
+        """
+        server = self.create_test_server(wait_until='ACTIVE')
+        try:
+            iface = self.interfaces_client.create_interface(server['id'])[
+                'interfaceAttachment']
+            iface = waiters.wait_for_interface_status(
+                self.interfaces_client, server['id'], iface['port_id'],
+                'ACTIVE')
+        except lib_exc.BadRequest as e:
+            msg = ('Multiple possible networks found, use a Network ID to be '
+                   'more specific.')
+            if not CONF.compute.fixed_network_name and six.text_type(e) == msg:
+                raise
+        else:
+            # just to check the response schema
+            self.interfaces_client.show_interface(
+                server['id'], iface['port_id'])
+            self.interfaces_client.list_interfaces(server['id'])
diff --git a/tempest/api/image/v2/test_images.py b/tempest/api/image/v2/test_images.py
index 28299a4..9e25901 100644
--- a/tempest/api/image/v2/test_images.py
+++ b/tempest/api/image/v2/test_images.py
@@ -402,7 +402,8 @@
         # Validate that the list was fetched sorted accordingly
         msg = 'No images were found that met the filter criteria.'
         self.assertNotEmpty(images_list, msg)
-        sorted_list = [image['size'] for image in images_list]
+        sorted_list = [image['size'] for image in images_list
+                       if image['size'] is not None]
         msg = 'The list of images was not sorted correctly.'
         self.assertEqual(sorted(sorted_list, reverse=desc), sorted_list, msg)
 
diff --git a/tempest/common/waiters.py b/tempest/common/waiters.py
index 625e08e..e3c33c7 100644
--- a/tempest/common/waiters.py
+++ b/tempest/common/waiters.py
@@ -317,6 +317,32 @@
              'seconds', attachment_id, volume_id, time.time() - start)
 
 
+def wait_for_volume_attachment_remove_from_server(
+        client, server_id, volume_id):
+    """Waits for a volume to be removed from a given server.
+
+    This waiter checks the compute API if the volume attachment is removed.
+    """
+    start = int(time.time())
+    volumes = client.list_volume_attachments(server_id)['volumeAttachments']
+
+    while any(volume for volume in volumes if volume['volumeId'] == volume_id):
+        time.sleep(client.build_interval)
+
+        timed_out = int(time.time()) - start >= client.build_timeout
+        if timed_out:
+            message = ('Volume %s failed to detach from server %s within '
+                       'the required time (%s s) from the compute API '
+                       'perspective' %
+                       (volume_id, server_id, client.build_timeout))
+            raise lib_exc.TimeoutException(message)
+
+        volumes = client.list_volume_attachments(server_id)[
+            'volumeAttachments']
+
+    return volumes
+
+
 def wait_for_volume_migration(client, volume_id, new_host):
     """Waits for a Volume to move to a new host."""
     body = client.show_volume(volume_id)['volume']
diff --git a/tempest/config.py b/tempest/config.py
index 3761d8e..382b80f 100644
--- a/tempest/config.py
+++ b/tempest/config.py
@@ -761,11 +761,13 @@
                 deprecated_reason="This config option is no longer "
                                   "used anywhere, so it can be removed."),
     cfg.StrOpt('port_vnic_type',
-               choices=[None, 'normal', 'direct', 'macvtap'],
+               choices=[None, 'normal', 'direct', 'macvtap', 'direct-physical',
+                        'baremetal', 'virtio-forwarder'],
                help="vnic_type to use when launching instances"
                     " with pre-configured ports."
                     " Supported ports are:"
-                    " ['normal','direct','macvtap']"),
+                    " ['normal', 'direct', 'macvtap', 'direct-physical', "
+                    "'baremetal', 'virtio-forwarder']"),
     cfg.Opt('port_profile',
             type=ProfileType,
             default={},
@@ -787,36 +789,37 @@
 NetworkFeaturesGroup = [
     cfg.BoolOpt('ipv6',
                 default=True,
-                help="Allow the execution of IPv6 tests"),
+                help="Allow the execution of IPv6 tests."),
     cfg.ListOpt('api_extensions',
                 default=['all'],
                 help="A list of enabled network extensions with a special "
                      "entry all which indicates every extension is enabled. "
                      "Empty list indicates all extensions are disabled. "
-                     "To get the list of extensions run: 'neutron ext-list'"),
+                     "To get the list of extensions run: "
+                     "'openstack extension list --network'"),
     cfg.ListOpt('available_features',
                 default=['all'],
                 help="A list of available network features with a special "
                      "entry all that indicates every feature is available. "
-                     "Empty list indicates all features are disabled."
+                     "Empty list indicates all features are disabled. "
                      "This list can contain features that are not "
-                     "discoverable through API."),
+                     "discoverable through the API."),
     cfg.BoolOpt('ipv6_subnet_attributes',
                 default=False,
                 help="Allow the execution of IPv6 subnet tests that use "
                      "the extended IPv6 attributes ipv6_ra_mode "
-                     "and ipv6_address_mode"
+                     "and ipv6_address_mode."
                 ),
     cfg.BoolOpt('port_admin_state_change',
                 default=True,
-                help="Does the test environment support changing"
-                     " port admin state"),
+                help="Does the test environment support changing "
+                     "port admin state?"),
     cfg.BoolOpt('port_security',
                 default=False,
                 help="Does the test environment support port security?"),
     cfg.BoolOpt('floating_ips',
                 default=True,
-                help='Does the test environment support floating_ips'),
+                help='Does the test environment support floating_ips?'),
     cfg.StrOpt('qos_placement_physnet', default=None,
                help='Name of the physnet for placement based minimum '
                     'bandwidth allocation.'),
diff --git a/tempest/lib/api_schema/response/compute/v2_70/interfaces.py b/tempest/lib/api_schema/response/compute/v2_70/interfaces.py
new file mode 100644
index 0000000..3160b92
--- /dev/null
+++ b/tempest/lib/api_schema/response/compute/v2_70/interfaces.py
@@ -0,0 +1,37 @@
+# Copyright 2014 NEC Corporation.  All rights reserved.
+#
+#    Licensed under the Apache License, Version 2.0 (the "License"); you may
+#    not use this file except in compliance with the License. You may obtain
+#    a copy of the License at
+#
+#         http://www.apache.org/licenses/LICENSE-2.0
+#
+#    Unless required by applicable law or agreed to in writing, software
+#    distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+#    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+#    License for the specific language governing permissions and limitations
+#    under the License.
+import copy
+
+from tempest.lib.api_schema.response.compute.v2_1 import interfaces
+
+# ****** Schemas changed in microversion 2.70 *****************
+#
+# 1. add optional field 'tag' in the Response body of the following APIs:
+#    - GET /servers/{server_id}/os-interface
+#    - POST /servers/{server_id}/os-interface
+#    - GET /servers/{server_id}/os-interface/{port_id}
+
+get_create_interfaces = copy.deepcopy(interfaces.get_create_interfaces)
+get_create_interfaces['response_body']['properties']['interfaceAttachment'][
+    'properties'].update({'tag': {'type': ['string', 'null']}})
+
+list_interfaces = copy.deepcopy(interfaces.list_interfaces)
+list_interfaces['response_body']['properties']['interfaceAttachments'][
+    'items']['properties'].update({'tag': {'type': ['string', 'null']}})
+
+# NOTE(zhufl): Below are the unchanged schema in this microversion. We need
+# to keep this schema in this file to have the generic way to select the
+# right schema based on self.schema_versions_info mapping in service client.
+# ****** Schemas unchanged since microversion 2.1 ***
+delete_interface = copy.deepcopy(interfaces.delete_interface)
diff --git a/tempest/lib/services/compute/interfaces_client.py b/tempest/lib/services/compute/interfaces_client.py
index e1c02fa..9244a4a 100644
--- a/tempest/lib/services/compute/interfaces_client.py
+++ b/tempest/lib/services/compute/interfaces_client.py
@@ -16,15 +16,22 @@
 from oslo_serialization import jsonutils as json
 
 from tempest.lib.api_schema.response.compute.v2_1 import interfaces as schema
+from tempest.lib.api_schema.response.compute.v2_70 import interfaces as \
+    schemav270
 from tempest.lib.common import rest_client
 from tempest.lib.services.compute import base_compute_client
 
 
 class InterfacesClient(base_compute_client.BaseComputeClient):
 
+    schema_versions_info = [
+        {'min': None, 'max': '2.69', 'schema': schema},
+        {'min': '2.70', 'max': None, 'schema': schemav270}]
+
     def list_interfaces(self, server_id):
         resp, body = self.get('servers/%s/os-interface' % server_id)
         body = json.loads(body)
+        schema = self.get_schema(self.schema_versions_info)
         self.validate_response(schema.list_interfaces, resp, body)
         return rest_client.ResponseBody(resp, body)
 
@@ -40,6 +47,7 @@
         resp, body = self.post('servers/%s/os-interface' % server_id,
                                body=post_body)
         body = json.loads(body)
+        schema = self.get_schema(self.schema_versions_info)
         self.validate_response(schema.get_create_interfaces, resp, body)
         return rest_client.ResponseBody(resp, body)
 
@@ -47,6 +55,7 @@
         resp, body = self.get('servers/%s/os-interface/%s' % (server_id,
                                                               port_id))
         body = json.loads(body)
+        schema = self.get_schema(self.schema_versions_info)
         self.validate_response(schema.get_create_interfaces, resp, body)
         return rest_client.ResponseBody(resp, body)
 
diff --git a/tempest/scenario/manager.py b/tempest/scenario/manager.py
index 3c37b70..2a41d13 100644
--- a/tempest/scenario/manager.py
+++ b/tempest/scenario/manager.py
@@ -143,10 +143,10 @@
     # resp part which is not used in scenario tests
 
     def create_port(self, network_id, client=None, **kwargs):
-        """Creates port"""
+        """Creates port for the respective network_id"""
         if not client:
             client = self.ports_client
-        name = data_utils.rand_name(self.__class__.__name__)
+        name = kwargs.pop('namestart', self.__class__.__name__)
         if CONF.network.port_vnic_type and 'binding:vnic_type' not in kwargs:
             kwargs['binding:vnic_type'] = CONF.network.port_vnic_type
         if CONF.network.port_profile and 'binding:profile' not in kwargs:
@@ -155,6 +155,7 @@
             name=name,
             network_id=network_id,
             **kwargs)
+        self.assertIsNotNone(result, 'Unable to allocate port')
         port = result['port']
         self.addCleanup(test_utils.call_and_ignore_notfound_exc,
                         client.delete_port, port['id'])
@@ -200,6 +201,14 @@
                 direct: an SR-IOV port that is directly attached to a VM
                 macvtap: an SR-IOV port that is attached to a VM via a macvtap
                          device.
+                direct-physical: an SR-IOV port that is directly attached to a
+                                 VM using physical instead of virtual
+                                 functions.
+                baremetal: a baremetal port directly attached to a baremetal
+                           node.
+                virtio-forwarder:  an SR-IOV port that is indirectly attached
+                                   to a VM using a low-latency vhost-user
+                                   forwarding process.
               Defaults to ``CONF.network.port_vnic_type``.
             * *port_profile* (``dict``) --
               This attribute is a dictionary that can be used (with admin
@@ -455,7 +464,8 @@
             admin_volumes_client.wait_for_resource_deletion(volume['id'])
         admin_volume_type_client.delete_volume_type(volume_type['id'])
 
-    def create_volume_type(self, client=None, name=None, backend_name=None):
+    def create_volume_type(self, client=None, name=None, backend_name=None,
+                           **kwargs):
         """Creates volume type
 
         In a multiple-storage back-end configuration,
@@ -482,12 +492,14 @@
 
         LOG.debug("Creating a volume type: %s on backend %s",
                   randomized_name, backend_name)
-        extra_specs = {}
+        extra_specs = kwargs.pop("extra_specs", {})
         if backend_name:
-            extra_specs = {"volume_backend_name": backend_name}
+            extra_specs.update({"volume_backend_name": backend_name})
 
-        volume_type = client.create_volume_type(
-            name=randomized_name, extra_specs=extra_specs)['volume_type']
+        volume_type_resp = client.create_volume_type(
+            name=randomized_name, extra_specs=extra_specs, **kwargs)
+        volume_type = volume_type_resp['volume_type']
+
         self.assertIn('id', volume_type)
         self.addCleanup(self._cleanup_volume_type, volume_type)
         return volume_type
@@ -574,7 +586,7 @@
         linux_client.validate_authentication()
         return linux_client
 
-    def image_create(self, name='scenario-img'):
+    def image_create(self, name='scenario-img', **kwargs):
         img_path = CONF.scenario.img_file
         if not os.path.exists(img_path):
             # TODO(kopecmartin): replace LOG.warning for rasing
@@ -614,6 +626,7 @@
             # Additional properties are flattened out in the v2 API.
             if img_properties:
                 params.update(img_properties)
+        params.update(kwargs)
         body = self.image_client.create_image(**params)
         image = body['image'] if 'image' in body else body
         self.addCleanup(self.image_client.delete_image, image['id'])
@@ -650,7 +663,7 @@
         if not isinstance(exc, lib_exc.SSHTimeout):
             LOG.debug('Network information on a devstack host')
 
-    def create_server_snapshot(self, server, name=None):
+    def create_server_snapshot(self, server, name=None, **kwargs):
         """Creates server snapshot"""
         # Glance client
         _image_client = self.image_client
@@ -659,7 +672,7 @@
         if name is None:
             name = data_utils.rand_name(self.__class__.__name__ + 'snapshot')
         LOG.debug("Creating a snapshot image for server: %s", server['name'])
-        image = _images_client.create_image(server['id'], name=name)
+        image = _images_client.create_image(server['id'], name=name, **kwargs)
         image_id = image.response['location'].split('images/')[1]
         waiters.wait_for_image_status(_image_client, image_id, 'active')
 
@@ -856,15 +869,25 @@
         return timestamp
 
     def get_timestamp(self, ip_address, dev_name=None, mount_path='/mnt',
-                      private_key=None, server=None):
+                      private_key=None, server=None, username=None):
         """Returns timestamp
 
         This wrapper utility does ssh and returns the timestamp.
+
+        :param ip_address: The floating IP or fixed IP of the remote server
+        :param dev_name: Name of the device that stores the timestamp
+        :param mount_path: Path which should be used as mount point for
+                           dev_name
+        :param private_key: The SSH private key to use for authentication
+        :param server: Server dict, used for debugging purposes
+        :param username: Name of the Linux account on the remote server
         """
 
         ssh_client = self.get_remote_client(ip_address,
                                             private_key=private_key,
-                                            server=server)
+                                            server=server,
+                                            username=username)
+
         if dev_name is not None:
             ssh_client.mount(dev_name, mount_path)
         timestamp = ssh_client.exec_command('sudo cat %s/timestamp'
@@ -951,12 +974,21 @@
 
         return self.create_server(**create_kwargs)
 
-    def create_volume_from_image(self):
-        """Create volume from image"""
-        img_uuid = CONF.compute.image_ref
-        vol_name = data_utils.rand_name(
-            self.__class__.__name__ + '-volume-origin')
-        return self.create_volume(name=vol_name, imageRef=img_uuid)
+    def create_volume_from_image(self, **kwargs):
+        """Create volume from image.
+
+        :param image_id: ID of the image to create volume from,
+            CONF.compute.image_ref by default
+        :param name: name of the volume,
+            '$classname-volume-origin' by default
+        :param **kwargs: additional parameters
+        """
+        image_id = kwargs.pop('image_id', CONF.compute.image_ref)
+        name = kwargs.pop('name', None)
+        if not name:
+            namestart = self.__class__.__name__ + '-volume-origin'
+            name = data_utils.rand_name(namestart)
+        return self.create_volume(name=name, imageRef=image_id, **kwargs)
 
 
 class NetworkScenarioTest(ScenarioTest):
@@ -1151,6 +1183,32 @@
                         floating_ip['id'])
         return floating_ip
 
+    def associate_floating_ip(self, floating_ip, server):
+        """Associate floating ip
+
+        This wrapper utility attaches the floating_ip for
+        the respective port_id of server
+        """
+        port_id, _ = self._get_server_port_id_and_ip4(server)
+        kwargs = dict(port_id=port_id)
+        floating_ip = self.floating_ips_client.update_floatingip(
+            floating_ip['id'], **kwargs)['floatingip']
+        self.assertEqual(port_id, floating_ip['port_id'])
+        return floating_ip
+
+    def disassociate_floating_ip(self, floating_ip):
+        """Disassociates floating ip
+
+        This wrapper utility disassociates given floating ip.
+        :param floating_ip: a dict which is a return value of
+        floating_ips_client.create_floatingip method
+        """
+        kwargs = dict(port_id=None)
+        floating_ip = self.floating_ips_client.update_floatingip(
+            floating_ip['id'], **kwargs)['floatingip']
+        self.assertIsNone(floating_ip['port_id'])
+        return floating_ip
+
     def check_floating_ip_status(self, floating_ip, status):
         """Verifies floatingip reaches the given status
 
diff --git a/tempest/scenario/test_minbw_allocation_placement.py b/tempest/scenario/test_minbw_allocation_placement.py
index 74d4ed9..86639c5 100644
--- a/tempest/scenario/test_minbw_allocation_placement.py
+++ b/tempest/scenario/test_minbw_allocation_placement.py
@@ -12,7 +12,7 @@
 #    License for the specific language governing permissions and limitations
 #    under the License.
 
-from oslo_log import log as logging
+import testtools
 
 from tempest.common import utils
 from tempest.common import waiters
@@ -23,7 +23,6 @@
 from tempest.scenario import manager
 
 
-LOG = logging.getLogger(__name__)
 CONF = config.CONF
 
 
@@ -65,6 +64,8 @@
         cls.routers_client = cls.os_adm.routers_client
         cls.qos_client = cls.os_admin.qos_client
         cls.qos_min_bw_client = cls.os_admin.qos_min_bw_client
+        cls.flavors_client = cls.os_adm.flavors_client
+        cls.servers_client = cls.os_adm.servers_client
 
     @classmethod
     def skip_checks(cls):
@@ -74,6 +75,11 @@
                   "placement based QoS allocation."
             raise cls.skipException(msg)
 
+    def setUp(self):
+        super(MinBwAllocationPlacementTest, self).setUp()
+        self._check_if_allocation_is_possible()
+        self._create_network_and_qos_policies()
+
     def _create_policy_and_min_bw_rule(self, name_prefix, min_kbps):
         policy = self.qos_client.create_qos_policy(
             name=data_utils.rand_name(name_prefix),
@@ -139,6 +145,33 @@
             self.fail('For %s:%s there should be no available candidate!' %
                       (self.INGRESS_RESOURCE_CLASS, self.PLACEMENT_MAX_INT))
 
+    def _boot_vm_with_min_bw(self, qos_policy_id, status='ACTIVE'):
+        wait_until = (None if status == 'ERROR' else status)
+        port = self.create_port(
+            self.prov_network['id'], qos_policy_id=qos_policy_id)
+
+        server = self.create_server(networks=[{'port': port['id']}],
+                                    wait_until=wait_until)
+        waiters.wait_for_server_status(
+            client=self.os_primary.servers_client, server_id=server['id'],
+            status=status, ready_wait=False, raise_on_error=False)
+        return server, port
+
+    def _assert_allocation_is_as_expected(self, allocations, port_id):
+        self.assertGreater(len(allocations['allocations']), 0)
+        bw_resource_in_alloc = False
+        for rp, resources in allocations['allocations'].items():
+            if self.INGRESS_RESOURCE_CLASS in resources['resources']:
+                bw_resource_in_alloc = True
+                allocation_rp = rp
+        self.assertTrue(bw_resource_in_alloc)
+
+        # Check binding_profile of the port is not empty and equals with the
+        # rp uuid
+        port = self.os_admin.ports_client.show_port(port_id)
+        self.assertEqual(allocation_rp,
+                         port['port']['binding:profile']['allocation'])
+
     @decorators.idempotent_id('78625d92-212c-400e-8695-dd51706858b8')
     @decorators.attr(type='slow')
     @utils.services('compute', 'network')
@@ -162,40 +195,13 @@
         it should fail.
         """
 
-        self._check_if_allocation_is_possible()
-
-        self._create_network_and_qos_policies()
-
-        valid_port = self.create_port(
-            self.prov_network['id'], qos_policy_id=self.qos_policy_valid['id'])
-
-        server1 = self.create_server(
-            networks=[{'port': valid_port['id']}])
+        server1, valid_port = self._boot_vm_with_min_bw(
+            qos_policy_id=self.qos_policy_valid['id'])
         allocations = self.placement_client.list_allocations(server1['id'])
+        self._assert_allocation_is_as_expected(allocations, valid_port['id'])
 
-        self.assertGreater(len(allocations['allocations']), 0)
-        bw_resource_in_alloc = False
-        for rp, resources in allocations['allocations'].items():
-            if self.INGRESS_RESOURCE_CLASS in resources['resources']:
-                bw_resource_in_alloc = True
-                allocation_rp = rp
-        self.assertTrue(bw_resource_in_alloc)
-        # Check that binding_profile of the port is not empty and equals with
-        # the rp uuid
-        port = self.os_admin.ports_client.show_port(valid_port['id'])
-        self.assertEqual(allocation_rp,
-                         port['port']['binding:profile']['allocation'])
-
-        # boot another vm with max int bandwidth
-        not_valid_port = self.create_port(
-            self.prov_network['id'],
-            qos_policy_id=self.qos_policy_not_valid['id'])
-        server2 = self.create_server(
-            wait_until=None,
-            networks=[{'port': not_valid_port['id']}])
-        waiters.wait_for_server_status(
-            client=self.os_primary.servers_client, server_id=server2['id'],
-            status='ERROR', ready_wait=False, raise_on_error=False)
+        server2, not_valid_port = self._boot_vm_with_min_bw(
+            self.qos_policy_not_valid['id'], status='ERROR')
         allocations = self.placement_client.list_allocations(server2['id'])
 
         self.assertEqual(0, len(allocations['allocations']))
@@ -205,3 +211,90 @@
         # Check that binding_profile of the port is empty
         port = self.os_admin.ports_client.show_port(not_valid_port['id'])
         self.assertEqual(0, len(port['port']['binding:profile']))
+
+    @decorators.idempotent_id('8a98150c-a506-49a5-96c6-73a5e7b04ada')
+    @testtools.skipUnless(CONF.compute_feature_enabled.cold_migration,
+                          'Cold migration is not available.')
+    @testtools.skipUnless(CONF.compute.min_compute_nodes > 1,
+                          'Less than 2 compute nodes, skipping multinode '
+                          'tests.')
+    @utils.services('compute', 'network')
+    def test_migrate_with_qos_min_bw_allocation(self):
+        """Scenario to migrate VM with QoS min bw allocation in placement
+
+        Boot a VM like in test_qos_min_bw_allocation_basic, do the same
+        checks, and
+        * migrate the server
+        * confirm the resize, if the VM state is VERIFY_RESIZE
+        * If the VM goes to ACTIVE state check that allocations are as
+        expected.
+        """
+        server, valid_port = self._boot_vm_with_min_bw(
+            qos_policy_id=self.qos_policy_valid['id'])
+        allocations = self.placement_client.list_allocations(server['id'])
+        self._assert_allocation_is_as_expected(allocations, valid_port['id'])
+
+        self.servers_client.migrate_server(server_id=server['id'])
+        waiters.wait_for_server_status(
+            client=self.os_primary.servers_client, server_id=server['id'],
+            status='VERIFY_RESIZE', ready_wait=False, raise_on_error=False)
+        allocations = self.placement_client.list_allocations(server['id'])
+
+        # TODO(lajoskatona): Check that the allocations are ok for the
+        #  migration?
+        self._assert_allocation_is_as_expected(allocations, valid_port['id'])
+
+        self.servers_client.confirm_resize_server(server_id=server['id'])
+        waiters.wait_for_server_status(
+            client=self.os_primary.servers_client, server_id=server['id'],
+            status='ACTIVE', ready_wait=False, raise_on_error=True)
+        allocations = self.placement_client.list_allocations(server['id'])
+        self._assert_allocation_is_as_expected(allocations, valid_port['id'])
+
+    @decorators.idempotent_id('c29e7fd3-035d-4993-880f-70819847683f')
+    @testtools.skipUnless(CONF.compute_feature_enabled.resize,
+                          'Resize not available.')
+    @utils.services('compute', 'network')
+    def test_resize_with_qos_min_bw_allocation(self):
+        """Scenario to resize VM with QoS min bw allocation in placement.
+
+        Boot a VM like in test_qos_min_bw_allocation_basic, do the same
+        checks, and
+        * resize the server with new flavor
+        * confirm the resize, if the VM state is VERIFY_RESIZE
+        * If the VM goes to ACTIVE state check that allocations are as
+        expected.
+        """
+        server, valid_port = self._boot_vm_with_min_bw(
+            qos_policy_id=self.qos_policy_valid['id'])
+        allocations = self.placement_client.list_allocations(server['id'])
+        self._assert_allocation_is_as_expected(allocations, valid_port['id'])
+
+        old_flavor = self.flavors_client.show_flavor(
+            CONF.compute.flavor_ref)['flavor']
+        new_flavor = self.flavors_client.create_flavor(**{
+            'ram': old_flavor['ram'],
+            'vcpus': old_flavor['vcpus'],
+            'name': old_flavor['name'] + 'extra',
+            'disk': old_flavor['disk'] + 1
+        })['flavor']
+        self.addCleanup(test_utils.call_and_ignore_notfound_exc,
+                        self.flavors_client.delete_flavor, new_flavor['id'])
+
+        self.servers_client.resize_server(
+            server_id=server['id'], flavor_ref=new_flavor['id'])
+        waiters.wait_for_server_status(
+            client=self.os_primary.servers_client, server_id=server['id'],
+            status='VERIFY_RESIZE', ready_wait=False, raise_on_error=False)
+        allocations = self.placement_client.list_allocations(server['id'])
+
+        # TODO(lajoskatona): Check that the allocations are ok for the
+        #  migration?
+        self._assert_allocation_is_as_expected(allocations, valid_port['id'])
+
+        self.servers_client.confirm_resize_server(server_id=server['id'])
+        waiters.wait_for_server_status(
+            client=self.os_primary.servers_client, server_id=server['id'],
+            status='ACTIVE', ready_wait=False, raise_on_error=True)
+        allocations = self.placement_client.list_allocations(server['id'])
+        self._assert_allocation_is_as_expected(allocations, valid_port['id'])
diff --git a/tempest/tests/common/test_waiters.py b/tempest/tests/common/test_waiters.py
index f45eec0..ff74877 100755
--- a/tempest/tests/common/test_waiters.py
+++ b/tempest/tests/common/test_waiters.py
@@ -20,6 +20,7 @@
 from tempest.common import waiters
 from tempest import exceptions
 from tempest.lib import exceptions as lib_exc
+from tempest.lib.services.compute import servers_client
 from tempest.lib.services.volume.v2 import volumes_client
 from tempest.tests import base
 import tempest.tests.utils as utils
@@ -384,3 +385,54 @@
                                                   uuids.attachment_id)
         # Assert that show volume is only called once before we return
         show_volume.assert_called_once_with(uuids.volume_id)
+
+    def test_wait_for_volume_attachment_remove_from_server(self):
+        volume_attached = {
+            "volumeAttachments": [{"volumeId": uuids.volume_id}]}
+        volume_not_attached = {"volumeAttachments": []}
+        mock_list_volume_attachments = mock.Mock(
+            side_effect=[volume_attached, volume_not_attached])
+        mock_client = mock.Mock(
+            spec=servers_client.ServersClient,
+            build_interval=1,
+            build_timeout=1,
+            list_volume_attachments=mock_list_volume_attachments)
+        self.patch(
+            'time.time',
+            side_effect=[0., 0.5, mock_client.build_timeout + 1.])
+        self.patch('time.sleep')
+
+        waiters.wait_for_volume_attachment_remove_from_server(
+            mock_client, uuids.server_id, uuids.volume_id)
+
+        # Assert that list_volume_attachments is called until the attachment is
+        # removed.
+        mock_list_volume_attachments.assert_has_calls([
+            mock.call(uuids.server_id),
+            mock.call(uuids.server_id)])
+
+    def test_wait_for_volume_attachment_remove_from_server_timeout(self):
+        volume_attached = {
+            "volumeAttachments": [{"volumeId": uuids.volume_id}]}
+        mock_list_volume_attachments = mock.Mock(
+            side_effect=[volume_attached, volume_attached])
+        mock_client = mock.Mock(
+            spec=servers_client.ServersClient,
+            build_interval=1,
+            build_timeout=1,
+            list_volume_attachments=mock_list_volume_attachments)
+        self.patch(
+            'time.time',
+            side_effect=[0., 0.5, mock_client.build_timeout + 1.])
+        self.patch('time.sleep')
+
+        self.assertRaises(
+            lib_exc.TimeoutException,
+            waiters.wait_for_volume_attachment_remove_from_server,
+            mock_client, uuids.server_id, uuids.volume_id)
+
+        # Assert that list_volume_attachments is called until the attachment is
+        # removed.
+        mock_list_volume_attachments.assert_has_calls([
+            mock.call(uuids.server_id),
+            mock.call(uuids.server_id)])
diff --git a/zuul.d/base.yaml b/zuul.d/base.yaml
new file mode 100644
index 0000000..3deb944
--- /dev/null
+++ b/zuul.d/base.yaml
@@ -0,0 +1,86 @@
+- job:
+    name: devstack-tempest
+    parent: devstack
+    description: |
+      Base Tempest job.
+
+      This Tempest job provides the base for both the single and multi-node
+      test setup. To run a multi-node test inherit from devstack-tempest and
+      set the nodeset to a multi-node one.
+    required-projects: &base_required-projects
+      - opendev.org/openstack/tempest
+    timeout: 7200
+    roles: &base_roles
+      - zuul: opendev.org/openstack/devstack
+    vars: &base_vars
+      devstack_services:
+        tempest: true
+      devstack_local_conf:
+        test-config:
+          $TEMPEST_CONFIG:
+            compute:
+              min_compute_nodes: "{{ groups['compute'] | default(['controller']) | length }}"
+      test_results_stage_name: test_results
+      zuul_copy_output:
+        '{{ devstack_base_dir }}/tempest/etc/tempest.conf': logs
+        '{{ devstack_base_dir }}/tempest/etc/accounts.yaml': logs
+        '{{ devstack_base_dir }}/tempest/tempest.log': logs
+        '{{ stage_dir }}/{{ test_results_stage_name }}.subunit': logs
+        '{{ stage_dir }}/{{ test_results_stage_name }}.html': logs
+        '{{ stage_dir }}/stackviz': logs
+      extensions_to_txt:
+        conf: true
+        log: true
+        yaml: true
+        yml: true
+    run: playbooks/devstack-tempest.yaml
+    post-run: playbooks/post-tempest.yaml
+
+- job:
+    name: devstack-tempest-ipv6
+    parent: devstack-ipv6
+    description: |
+      Base Tempest IPv6 job. This job is derived from 'devstack-ipv6'
+      which set the IPv6-only setting for OpenStack services. As part of
+      run phase, this job will verify the IPv6 setting and check the services
+      endpoints and listen addresses are IPv6. Basically it will run the script
+      ./tool/verify-ipv6-only-deployments.sh
+
+      Child jobs of this job can run their own set of tests and can
+      add post-run playebooks to extend the IPv6 verification specific
+      to their deployed services.
+      Check the wiki page for more details about project jobs setup
+      - https://wiki.openstack.org/wiki/Goal-IPv6-only-deployments-and-testing
+    required-projects: *base_required-projects
+    timeout: 7200
+    roles: *base_roles
+    vars: *base_vars
+    run: playbooks/devstack-tempest-ipv6.yaml
+    post-run: playbooks/post-tempest.yaml
+
+- job:
+    name: tempest-multinode-full-base
+    parent: devstack-tempest
+    description: |
+      Base multinode integration test with Neutron networking and py27.
+      Former names for this job were:
+        * neutron-tempest-multinode-full
+        * legacy-tempest-dsvm-neutron-multinode-full
+        * gate-tempest-dsvm-neutron-multinode-full-ubuntu-xenial-nv
+      This job includes two nodes, controller / tempest plus a subnode, but
+      it can be used with different topologies, as long as a controller node
+      and a tempest one exist.
+    timeout: 10800
+    vars:
+      tox_envlist: full
+      devstack_localrc:
+        FORCE_CONFIG_DRIVE: false
+        NOVA_ALLOW_MOVE_TO_SAME_HOST: false
+        LIVE_MIGRATION_AVAILABLE: true
+        USE_BLOCK_MIGRATION_FOR_LIVE_MIGRATION: true
+    group-vars:
+      peers:
+        devstack_localrc:
+          NOVA_ALLOW_MOVE_TO_SAME_HOST: false
+          LIVE_MIGRATION_AVAILABLE: true
+          USE_BLOCK_MIGRATION_FOR_LIVE_MIGRATION: true
diff --git a/zuul.d/integrated-gate.yaml b/zuul.d/integrated-gate.yaml
new file mode 100644
index 0000000..bf689c5
--- /dev/null
+++ b/zuul.d/integrated-gate.yaml
@@ -0,0 +1,441 @@
+# NOTE(gmann): This file includes all integrated jobs definition which
+# are supposed to be run by Tempest and other projects as
+# integrated testing.
+- job:
+    name: tempest-all
+    parent: devstack-tempest
+    description: |
+      Integration test that runs all tests.
+      Former name for this job was:
+        * legacy-periodic-tempest-dsvm-all-master
+    vars:
+      tox_envlist: all
+      tempest_test_regex: tempest
+      devstack_localrc:
+        ENABLE_FILE_INJECTION: true
+
+- job:
+    name: tempest-ipv6-only
+    parent: devstack-tempest-ipv6
+    # This currently works from stable/pike on.
+    branches: ^(?!stable/ocata).*$
+    description: |
+      Integration test of IPv6-only deployments. This job runs
+      smoke and IPv6 relates tests only. Basic idea is to test
+      whether OpenStack Services listen on IPv6 addrress or not.
+    timeout: 10800
+    vars:
+      tox_envlist: ipv6-only
+
+- job:
+    name: tempest-full
+    parent: devstack-tempest
+    # This currently works from stable/pike on.
+    # Before stable/pike, legacy version of tempest-full
+    # 'legacy-tempest-dsvm-neutron-full' run.
+    branches: ^(?!stable/ocata).*$
+    description: |
+      Base integration test with Neutron networking and py27.
+      This job is supposed to run until stable/train setup only.
+      If you are running it on stable/ussuri gate onwards for python2.7
+      coverage then you need to do override-checkout with any stable
+      branch less than or equal to stable/train.
+      Former names for this job where:
+        * legacy-tempest-dsvm-neutron-full
+        * gate-tempest-dsvm-neutron-full-ubuntu-xenial
+    vars:
+      tox_envlist: full
+      devstack_localrc:
+        ENABLE_FILE_INJECTION: true
+        ENABLE_VOLUME_MULTIATTACH: true
+        USE_PYTHON3: False
+      devstack_services:
+        # NOTE(mriedem): Disable the cinder-backup service from tempest-full
+        # since tempest-full is in the integrated-gate project template but
+        # the backup tests do not really involve other services so they should
+        # be run in some more cinder-specific job, especially because the
+        # tests fail at a high rate (see bugs 1483434, 1813217, 1745168)
+        c-bak: false
+
+- job:
+    name: tempest-full-py3
+    parent: devstack-tempest
+    # This currently works from stable/pike on.
+    # Before stable/pike, legacy version of tempest-full
+    # 'legacy-tempest-dsvm-neutron-full' run.
+    branches: ^(?!stable/ocata).*$
+    description: |
+      Base integration test with Neutron networking and py3.
+      Former names for this job where:
+        * legacy-tempest-dsvm-py35
+        * gate-tempest-dsvm-py35
+    vars:
+      tox_envlist: full
+      devstack_localrc:
+        USE_PYTHON3: true
+        FORCE_CONFIG_DRIVE: true
+        ENABLE_VOLUME_MULTIATTACH: true
+        GLANCE_USE_IMPORT_WORKFLOW: True
+      devstack_plugins:
+        neutron: https://opendev.org/openstack/neutron
+      devstack_local_conf:
+        post-config:
+          "/$NEUTRON_CORE_PLUGIN_CONF":
+            ovs:
+              bridge_mappings: public:br-ex
+              resource_provider_bandwidths: br-ex:1000000:1000000
+        test-config:
+          $TEMPEST_CONFIG:
+            network-feature-enabled:
+              qos_placement_physnet: public
+      devstack_services:
+        s-account: false
+        s-container: false
+        s-object: false
+        s-proxy: false
+        # without Swift, c-bak cannot run (in the Gate at least)
+        # NOTE(mriedem): Disable the cinder-backup service from
+        # tempest-full-py3 since tempest-full-py3 is in the integrated-gate-py3
+        # project template but the backup tests do not really involve other
+        # services so they should be run in some more cinder-specific job,
+        # especially because the tests fail at a high rate (see bugs 1483434,
+        # 1813217, 1745168)
+        c-bak: false
+        neutron-placement: true
+        neutron-qos: true
+
+- job:
+    name: tempest-integrated-networking
+    parent: devstack-tempest
+    branches: ^(?!stable/ocata).*$
+    description: |
+      This  job runs integration tests for networking. This is subset of
+      'tempest-full-py3' job and run only Neutron and Nova related tests.
+      This is meant to be run on neutron gate only.
+    vars:
+      tox_envlist: integrated-network
+      devstack_localrc:
+        USE_PYTHON3: true
+        FORCE_CONFIG_DRIVE: true
+      devstack_services:
+        s-account: false
+        s-container: false
+        s-object: false
+        s-proxy: false
+        c-bak: false
+
+- job:
+    name: tempest-integrated-compute
+    parent: devstack-tempest
+    branches: ^(?!stable/ocata).*$
+    description: |
+      This job runs integration tests for compute. This is
+      subset of 'tempest-full-py3' job and run Nova, Neutron, Cinder (except backup tests)
+      and Glance related tests. This is meant to be run on Nova gate only.
+    vars:
+      tox_envlist: integrated-compute
+      tempest_black_regex: ""
+      devstack_localrc:
+        USE_PYTHON3: true
+        FORCE_CONFIG_DRIVE: true
+        ENABLE_VOLUME_MULTIATTACH: true
+      devstack_services:
+        s-account: false
+        s-container: false
+        s-object: false
+        s-proxy: false
+        c-bak: false
+
+- job:
+    name: tempest-integrated-placement
+    parent: devstack-tempest
+    branches: ^(?!stable/ocata).*$
+    description: |
+      This job runs integration tests for placement. This is
+      subset of 'tempest-full-py3' job and run Nova and Neutron
+      related tests. This is meant to be run on Placement gate only.
+    vars:
+      tox_envlist: integrated-placement
+      devstack_localrc:
+        USE_PYTHON3: true
+        FORCE_CONFIG_DRIVE: true
+        ENABLE_VOLUME_MULTIATTACH: true
+      devstack_services:
+        s-account: false
+        s-container: false
+        s-object: false
+        s-proxy: false
+        c-bak: false
+
+- job:
+    name: tempest-integrated-storage
+    parent: devstack-tempest
+    branches: ^(?!stable/ocata).*$
+    description: |
+      This job runs integration tests for image & block storage. This is
+      subset of 'tempest-full-py3' job and run Cinder, Glance, Swift and Nova
+      related tests. This is meant to be run on Cinder and Glance gate only.
+    vars:
+      tox_envlist: integrated-storage
+      devstack_localrc:
+        USE_PYTHON3: true
+        FORCE_CONFIG_DRIVE: true
+        ENABLE_VOLUME_MULTIATTACH: true
+        GLANCE_USE_IMPORT_WORKFLOW: True
+
+- job:
+    name: tempest-integrated-object-storage
+    parent: devstack-tempest
+    branches: ^(?!stable/ocata).*$
+    description: |
+      This job runs integration tests for object storage. This is
+      subset of 'tempest-full-py3' job and run Swift, Cinder and Glance
+      related tests. This is meant to be run on Swift gate only.
+    vars:
+      tox_envlist: integrated-object-storage
+      devstack_localrc:
+        # NOTE(gmann): swift is not ready on python3 yet and devstack
+        # install it on python2.7 only. But settting the USE_PYTHON3
+        # for future once swift is ready on py3.
+        USE_PYTHON3: true
+
+- job:
+    name: tempest-multinode-full
+    parent: tempest-multinode-full-base
+    nodeset: openstack-two-node-focal
+    # This job runs on Focal from stable/victoria on.
+    branches: ^(?!stable/(ocata|pike|queens|rocky|stein|train|ussuri)).*$
+    vars:
+      devstack_localrc:
+        USE_PYTHON3: False
+    group-vars:
+      subnode:
+        devstack_localrc:
+          USE_PYTHON3: False
+
+- job:
+    name: tempest-multinode-full
+    parent: tempest-multinode-full-base
+    nodeset: openstack-two-node-bionic
+    # This job runs on Bionic and on python2. This is for stable/stein and stable/train.
+    # This job is prepared to make sure all stable branches from stable/stein till stable/train
+    # will keep running on bionic. This can be removed once stable/train is EOL.
+    branches:
+      - stable/stein
+      - stable/train
+      - stable/ussuri
+    vars:
+      devstack_localrc:
+        USE_PYTHON3: False
+    group-vars:
+      subnode:
+        devstack_localrc:
+          USE_PYTHON3: False
+
+- job:
+    name: tempest-multinode-full
+    parent: tempest-multinode-full-base
+    nodeset: openstack-two-node-xenial
+    # This job runs on Xenial and this is for stable/pike, stable/queens
+    # and stable/rocky. This job is prepared to make sure all stable branches
+    # before stable/stein will keep running on xenial. This job can be
+    # removed once stable/rocky is EOL.
+    branches:
+      - stable/pike
+      - stable/queens
+      - stable/rocky
+    vars:
+      devstack_localrc:
+        USE_PYTHON3: False
+    group-vars:
+      subnode:
+        devstack_localrc:
+          USE_PYTHON3: False
+
+- job:
+    name: tempest-multinode-full-py3
+    parent: tempest-multinode-full
+    vars:
+      devstack_localrc:
+        USE_PYTHON3: true
+      devstack_plugins:
+        neutron: https://opendev.org/openstack/neutron
+      devstack_local_conf:
+        post-config:
+          "/$NEUTRON_CORE_PLUGIN_CONF":
+            ovs:
+              bridge_mappings: public:br-ex
+              resource_provider_bandwidths: br-ex:1000000:1000000
+        test-config:
+          $TEMPEST_CONFIG:
+            network-feature-enabled:
+              qos_placement_physnet: public
+      devstack_services:
+        neutron-placement: true
+        neutron-qos: true
+    group-vars:
+      subnode:
+        devstack_localrc:
+          USE_PYTHON3: true
+
+- job:
+    name: tempest-slow
+    parent: tempest-multinode-full
+    description: |
+      This multinode integration job will run all the tests tagged as slow.
+      It enables the lvm multibackend setup to cover few scenario tests.
+      This job will run only slow tests (API or Scenario) serially.
+
+      Former names for this job were:
+        * legacy-tempest-dsvm-neutron-scenario-multinode-lvm-multibackend
+        * tempest-scenario-multinode-lvm-multibackend
+    timeout: 10800
+    vars:
+      tox_envlist: slow-serial
+      devstack_localrc:
+        CINDER_ENABLED_BACKENDS: lvm:lvmdriver-1,lvm:lvmdriver-2
+        ENABLE_VOLUME_MULTIATTACH: true
+      devstack_plugins:
+        neutron: https://opendev.org/openstack/neutron
+      devstack_services:
+        neutron-placement: true
+        neutron-qos: true
+      devstack_local_conf:
+        post-config:
+          "/$NEUTRON_CORE_PLUGIN_CONF":
+            ovs:
+              bridge_mappings: public:br-ex
+              resource_provider_bandwidths: br-ex:1000000:1000000
+        test-config:
+          $TEMPEST_CONFIG:
+            network-feature-enabled:
+              qos_placement_physnet: public
+      tempest_concurrency: 2
+    group-vars:
+      # NOTE(mriedem): The ENABLE_VOLUME_MULTIATTACH variable is used on both
+      # the controller and subnode prior to Rocky so we have to make sure the
+      # variable is set in both locations.
+      subnode:
+        devstack_localrc:
+          ENABLE_VOLUME_MULTIATTACH: true
+
+- job:
+    name: tempest-slow-py3
+    parent: tempest-slow
+    vars:
+      devstack_localrc:
+        USE_PYTHON3: true
+      devstack_services:
+        s-account: false
+        s-container: false
+        s-object: false
+        s-proxy: false
+        # without Swift, c-bak cannot run (in the Gate at least)
+        c-bak: false
+    group-vars:
+      subnode:
+        devstack_localrc:
+          USE_PYTHON3: true
+
+- job:
+    name: tempest-cinder-v2-api
+    parent: devstack-tempest
+    branches:
+      - master
+    description: |
+      This job runs the cinder API test against v2 endpoint.
+    vars:
+      tox_envlist: all
+      tempest_test_regex: api.*volume
+      devstack_localrc:
+        TEMPEST_VOLUME_TYPE: volumev2
+
+- job:
+    name: tempest-pg-full
+    parent: tempest-full-py3
+    description: |
+      Base integration test with Neutron networking and PostgreSQL.
+      Former name for this job was legacy-tempest-dsvm-neutron-pg-full.
+    vars:
+      devstack_localrc:
+        ENABLE_FILE_INJECTION: true
+        DATABASE_TYPE: postgresql
+
+- project-template:
+    name: integrated-gate-networking
+    description: |
+      Run the python3 Tempest network integration tests (Nova and Neutron related)
+      in check and gate for the neutron integrated gate. This is meant to be
+      run on neutron gate only.
+    check:
+      jobs:
+        - grenade
+        - tempest-integrated-networking
+    gate:
+      jobs:
+        - grenade
+        - tempest-integrated-networking
+
+- project-template:
+    name: integrated-gate-compute
+    description: |
+      Run the python3 Tempest compute integration tests
+      (Nova, Neutron, Cinder and Glance related) in check and gate
+      for the Nova integrated gate. This is meant to be
+      run on Nova gate only.
+    check:
+      jobs:
+        - grenade
+        - tempest-integrated-compute
+    gate:
+      jobs:
+        - grenade
+        - tempest-integrated-compute
+
+- project-template:
+    name: integrated-gate-placement
+    description: |
+      Run the python3 Tempest placement integration tests
+      (Nova and Neutron related) in check and gate
+      for the Placement integrated gate. This is meant to be
+      run on Placement gate only.
+    check:
+      jobs:
+        - grenade
+        - tempest-integrated-placement
+    gate:
+      jobs:
+        - grenade
+        - tempest-integrated-placement
+
+- project-template:
+    name: integrated-gate-storage
+    description: |
+      Run the python3 Tempest image & block storage integration tests
+      (Cinder, Glance, Swift and Nova related) in check and gate
+      for the neutron integrated gate. This is meant to be
+      run on Cinder and Glance gate only.
+    check:
+      jobs:
+        - grenade
+        - tempest-integrated-storage
+    gate:
+      jobs:
+        - grenade
+        - tempest-integrated-storage
+
+- project-template:
+    name: integrated-gate-object-storage
+    description: |
+      Run the python3 Tempest object storage integration tests
+      (Swift, Cinder and Glance related) in check and gate
+      for the swift integrated gate. This is meant to be
+      run on swift gate only.
+    check:
+      jobs:
+        - grenade
+        - tempest-integrated-object-storage
+    gate:
+      jobs:
+        - grenade
+        - tempest-integrated-object-storage
diff --git a/zuul.d/project.yaml b/zuul.d/project.yaml
new file mode 100644
index 0000000..f2522af
--- /dev/null
+++ b/zuul.d/project.yaml
@@ -0,0 +1,146 @@
+- project:
+    templates:
+      - check-requirements
+      - integrated-gate-py3
+      - openstack-cover-jobs
+      - openstack-python3-victoria-jobs
+      - publish-openstack-docs-pti
+      - release-notes-jobs-python3
+    check:
+      jobs:
+        - devstack-tempest:
+            files:
+              - ^playbooks/
+              - ^roles/
+              - ^.zuul.yaml$
+        - devstack-tempest-ipv6:
+            voting: false
+            files:
+              - ^playbooks/
+              - ^roles/
+              - ^.zuul.yaml$
+        - tempest-full-parallel:
+            # Define list of irrelevant files to use everywhere else
+            irrelevant-files: &tempest-irrelevant-files
+              - ^.*\.rst$
+              - ^doc/.*$
+              - ^etc/.*$
+              - ^releasenotes/.*$
+              - ^setup.cfg$
+              - ^tempest/hacking/.*$
+              - ^tempest/tests/.*$
+              - ^tools/.*$
+              - ^.coveragerc$
+              - ^.gitignore$
+              - ^.gitreview$
+              - ^.mailmap$
+        - tempest-full-py3:
+            irrelevant-files: *tempest-irrelevant-files
+        - tempest-full-py3-ipv6:
+            voting: false
+            irrelevant-files: *tempest-irrelevant-files
+        - glance-multistore-cinder-import:
+            voting: false
+            irrelevant-files: *tempest-irrelevant-files
+        - tempest-full-victoria-py3:
+            irrelevant-files: *tempest-irrelevant-files
+        - tempest-full-ussuri-py3:
+            irrelevant-files: *tempest-irrelevant-files
+        - tempest-full-train-py3:
+            irrelevant-files: *tempest-irrelevant-files
+        - tempest-full-stein-py3:
+            irrelevant-files: *tempest-irrelevant-files
+        - tempest-multinode-full-py3:
+            irrelevant-files: *tempest-irrelevant-files
+        - tempest-tox-plugin-sanity-check:
+            irrelevant-files: &tempest-irrelevant-files-2
+              - ^.*\.rst$
+              - ^doc/.*$
+              - ^etc/.*$
+              - ^releasenotes/.*$
+              - ^setup.cfg$
+              - ^tempest/hacking/.*$
+              - ^tempest/tests/.*$
+              - ^.coveragerc$
+              - ^.gitignore$
+              - ^.gitreview$
+              - ^.mailmap$
+              # tools/ is not here since this relies on a script in tools/.
+        - tempest-ipv6-only:
+            irrelevant-files: *tempest-irrelevant-files-2
+        - tempest-slow-py3:
+            irrelevant-files: *tempest-irrelevant-files
+        - nova-live-migration:
+            voting: false
+            irrelevant-files: *tempest-irrelevant-files
+        - devstack-plugin-ceph-tempest-py3:
+            irrelevant-files: *tempest-irrelevant-files
+        - neutron-grenade-multinode:
+            irrelevant-files: *tempest-irrelevant-files
+        - grenade:
+            irrelevant-files: *tempest-irrelevant-files
+        - puppet-openstack-integration-4-scenario001-tempest-centos-7:
+            voting: false
+            irrelevant-files: *tempest-irrelevant-files
+        - puppet-openstack-integration-4-scenario002-tempest-centos-7:
+            voting: false
+            irrelevant-files: *tempest-irrelevant-files
+        - puppet-openstack-integration-4-scenario003-tempest-centos-7:
+            voting: false
+            irrelevant-files: *tempest-irrelevant-files
+        - puppet-openstack-integration-4-scenario004-tempest-centos-7:
+            voting: false
+            irrelevant-files: *tempest-irrelevant-files
+        - neutron-tempest-dvr:
+            voting: false
+            irrelevant-files: *tempest-irrelevant-files
+        - interop-tempest-consistency:
+            irrelevant-files: *tempest-irrelevant-files
+        - tempest-full-test-account-py3:
+            voting: false
+            irrelevant-files: *tempest-irrelevant-files
+        - tempest-full-test-account-no-admin-py3:
+            voting: false
+            irrelevant-files: *tempest-irrelevant-files
+        - openstack-tox-bashate:
+            irrelevant-files: *tempest-irrelevant-files-2
+    gate:
+      jobs:
+        - tempest-slow-py3:
+            irrelevant-files: *tempest-irrelevant-files
+        - neutron-grenade-multinode:
+            irrelevant-files: *tempest-irrelevant-files
+        - tempest-full-py3:
+            irrelevant-files: *tempest-irrelevant-files
+        - grenade:
+            irrelevant-files: *tempest-irrelevant-files
+        - tempest-ipv6-only:
+            irrelevant-files: *tempest-irrelevant-files-2
+        - devstack-plugin-ceph-tempest-py3:
+            irrelevant-files: *tempest-irrelevant-files
+    experimental:
+      jobs:
+        - tempest-cinder-v2-api:
+            irrelevant-files: *tempest-irrelevant-files
+        - tempest-all:
+            irrelevant-files: *tempest-irrelevant-files
+        - neutron-tempest-dvr-ha-multinode-full:
+            irrelevant-files: *tempest-irrelevant-files
+        - nova-tempest-v2-api:
+            irrelevant-files: *tempest-irrelevant-files
+        - cinder-tempest-lvm-multibackend:
+            irrelevant-files: *tempest-irrelevant-files
+        - tempest-pg-full:
+            irrelevant-files: *tempest-irrelevant-files
+        - tempest-full-py3-opensuse15:
+            irrelevant-files: *tempest-irrelevant-files
+    periodic-stable:
+      jobs:
+        - tempest-full-victoria-py3
+        - tempest-full-ussuri-py3
+        - tempest-full-train-py3
+        - tempest-full-stein-py3
+    periodic:
+      jobs:
+        - tempest-all
+        - tempest-full-oslo-master
diff --git a/zuul.d/stable-jobs.yaml b/zuul.d/stable-jobs.yaml
new file mode 100644
index 0000000..832a0d5
--- /dev/null
+++ b/zuul.d/stable-jobs.yaml
@@ -0,0 +1,23 @@
+# NOTE(gmann): This file includes all stable release jobs definition.
+- job:
+    name: tempest-full-victoria-py3
+    parent: tempest-full-py3
+    override-checkout: stable/victoria
+
+- job:
+    name: tempest-full-ussuri-py3
+    parent: tempest-full-py3
+    nodeset: openstack-single-node-bionic
+    override-checkout: stable/ussuri
+
+- job:
+    name: tempest-full-train-py3
+    parent: tempest-full-py3
+    nodeset: openstack-single-node-bionic
+    override-checkout: stable/train
+
+- job:
+    name: tempest-full-stein-py3
+    parent: tempest-full-py3
+    nodeset: openstack-single-node-bionic
+    override-checkout: stable/stein
diff --git a/zuul.d/tempest-specific.yaml b/zuul.d/tempest-specific.yaml
new file mode 100644
index 0000000..387a94b
--- /dev/null
+++ b/zuul.d/tempest-specific.yaml
@@ -0,0 +1,113 @@
+# NOTE(gmann): This file includes all tempest specific jobs definition which
+# are supposed to be run by Tempest gate only.
+- job:
+    name: tempest-full-oslo-master
+    parent: tempest-full-py3
+    description: |
+      Integration test using current git of oslo libs.
+      This ensures that when oslo libs get released that they
+      do not break OpenStack server projects.
+
+      Former name for this job was
+      periodic-tempest-dsvm-oslo-latest-full-master.
+    timeout: 10800
+    required-projects:
+      - opendev.org/openstack/oslo.cache
+      - opendev.org/openstack/oslo.concurrency
+      - opendev.org/openstack/oslo.config
+      - opendev.org/openstack/oslo.context
+      - opendev.org/openstack/oslo.db
+      - opendev.org/openstack/oslo.i18n
+      - opendev.org/openstack/oslo.log
+      - opendev.org/openstack/oslo.messaging
+      - opendev.org/openstack/oslo.middleware
+      - opendev.org/openstack/oslo.policy
+      - opendev.org/openstack/oslo.privsep
+      - opendev.org/openstack/oslo.reports
+      - opendev.org/openstack/oslo.rootwrap
+      - opendev.org/openstack/oslo.serialization
+      - opendev.org/openstack/oslo.service
+      - opendev.org/openstack/oslo.utils
+      - opendev.org/openstack/oslo.versionedobjects
+      - opendev.org/openstack/oslo.vmware
+
+- job:
+    name: tempest-full-parallel
+    parent: tempest-full-py3
+    voting: false
+    branches:
+      - master
+    description: |
+      Base integration test with Neutron networking.
+      It includes all scenarios as it was in the past.
+      This job runs all scenario tests in parallel!
+    timeout: 9000
+    vars:
+      tox_envlist: full-parallel
+      run_tempest_cleanup: true
+      run_tempest_dry_cleanup: true
+
+- job:
+    name: tempest-full-py3-ipv6
+    parent: devstack-tempest-ipv6
+    branches: ^(?!stable/ocata).*$
+    description: |
+      Base integration test with Neutron networking, IPv6 and py3.
+    vars:
+      tox_envlist: full
+      devstack_localrc:
+        USE_PYTHON3: true
+        FORCE_CONFIG_DRIVE: true
+      devstack_services:
+        s-account: false
+        s-container: false
+        s-object: false
+        s-proxy: false
+        # without Swift, c-bak cannot run (in the Gate at least)
+        c-bak: false
+
+- job:
+    name: tempest-full-py3-opensuse15
+    parent: tempest-full-py3
+    nodeset: devstack-single-node-opensuse-15
+    description: |
+      Base integration test with Neutron networking and py36 running
+      on openSUSE Leap 15.x
+    voting: false
+
+- job:
+    name: tempest-tox-plugin-sanity-check
+    parent: tox
+    description: |
+      Run tempest plugin sanity check script using tox.
+    nodeset: ubuntu-focal
+    vars:
+      tox_envlist: plugin-sanity-check
+    timeout: 5000
+
+- job:
+    name: tempest-full-test-account-py3
+    parent: tempest-full-py3
+    description: |
+      This job runs the full set of tempest tests using pre-provisioned
+      credentials instead of dynamic credentials and py3.
+      Former names for this job were:
+        - legacy-tempest-dsvm-full-test-accounts
+        - legacy-tempest-dsvm-neutron-full-test-accounts
+        - legacy-tempest-dsvm-identity-v3-test-accounts
+    vars:
+      devstack_localrc:
+        TEMPEST_USE_TEST_ACCOUNTS: True
+
+- job:
+    name: tempest-full-test-account-no-admin-py3
+    parent: tempest-full-test-account-py3
+    description: |
+      This job runs the full set of tempest tests using pre-provisioned
+      credentials and py3 without having an admin account.
+      Former name for this job was:
+        - legacy-tempest-dsvm-neutron-full-non-admin
+
+    vars:
+      devstack_localrc:
+        TEMPEST_HAS_ADMIN: False