diff --git a/HACKING.rst b/HACKING.rst
index f97f97a..c0a857c 100644
--- a/HACKING.rst
+++ b/HACKING.rst
@@ -246,7 +246,7 @@
 to the config variables in tempest/config.py then the sample config file must be
 regenerated. This can be done running::
 
-  tox -egenconfig
+  tox -e genconfig
 
 Unit Tests
 ----------
diff --git a/README.rst b/README.rst
index c1c6a10..ac93992 100644
--- a/README.rst
+++ b/README.rst
@@ -172,7 +172,7 @@
 You can generate a new sample tempest.conf file, run the following
 command from the top level of the Tempest directory::
 
-    $ tox -egenconfig
+    $ tox -e genconfig
 
 The most important pieces that are needed are the user ids, openstack
 endpoint, and basic flavors and images needed to run tests.
@@ -258,11 +258,11 @@
 
 Tox also contains several existing job configurations. For example::
 
-    $ tox -efull
+    $ tox -e full
 
 which will run the same set of tests as the OpenStack gate. (it's exactly how
 the gate invokes Tempest) Or::
 
-    $ tox -esmoke
+    $ tox -e smoke
 
 to run the tests tagged as smoke.
diff --git a/releasenotes/notes/remove-deprecated-allow_port_security_disabled-option-d0ffaeb2e7817707.yaml b/releasenotes/notes/remove-deprecated-allow_port_security_disabled-option-d0ffaeb2e7817707.yaml
new file mode 100644
index 0000000..9d7102f
--- /dev/null
+++ b/releasenotes/notes/remove-deprecated-allow_port_security_disabled-option-d0ffaeb2e7817707.yaml
@@ -0,0 +1,5 @@
+---
+upgrade:
+  - |
+    The deprecated config option 'allow_port_security_disabled' from compute_feature_enabled
+    group has been removed.
diff --git a/releasenotes/notes/remove-deprecated-dvr_extra_resources-option-e8c441c38eab7ddd.yaml b/releasenotes/notes/remove-deprecated-dvr_extra_resources-option-e8c441c38eab7ddd.yaml
new file mode 100644
index 0000000..889e862
--- /dev/null
+++ b/releasenotes/notes/remove-deprecated-dvr_extra_resources-option-e8c441c38eab7ddd.yaml
@@ -0,0 +1,8 @@
+---
+upgrade:
+  - |
+    The deprecated config option 'dvr_extra_resources' from network group has been removed.
+    This option was for extra resources which were provisioned to bind a router to Neutron
+    L3 agent. The extra resources need to be provisioned in Liberty release or older,
+    and are not required since Mitaka release. Current Tempest doesn't support Liberty, so
+    this option has been removed from Tempest.
diff --git a/releasenotes/notes/remove-deprecated-identity-reseller-option-4411c7e3951f1094.yaml b/releasenotes/notes/remove-deprecated-identity-reseller-option-4411c7e3951f1094.yaml
new file mode 100644
index 0000000..8085694
--- /dev/null
+++ b/releasenotes/notes/remove-deprecated-identity-reseller-option-4411c7e3951f1094.yaml
@@ -0,0 +1,4 @@
+---
+upgrade:
+  - |
+    The deprecated config option 'reseller' from identity_feature_enabled group has been removed.
diff --git a/releasenotes/notes/volume-transfers-client-e5ed3f5464c0cdc0.yaml b/releasenotes/notes/volume-transfers-client-e5ed3f5464c0cdc0.yaml
new file mode 100644
index 0000000..e5e479b
--- /dev/null
+++ b/releasenotes/notes/volume-transfers-client-e5ed3f5464c0cdc0.yaml
@@ -0,0 +1,18 @@
+---
+features:
+  - |
+    Define volume transfers service clients as libraries.
+    The following volume transfers service clients are defined as library interface.
+
+    * transfers_client(v2)
+deprecations:
+  - |
+    Deprecate volume v2 transfers resource methods from volumes_client(v2) libraries.
+    Same methods are available in new transfers service client: transfers_client(v2)
+    The following methods of volume v2 volumes_clients have been deprecated:
+
+    * create_volume_transfer (v2.volumes_client)
+    * show_volume_transfer (v2.volumes_client)
+    * list_volume_transfers (v2.volumes_client)
+    * delete_volume_transfer (v2.volumes_client)
+    * accept_volume_transfer (v2.volumes_client)
diff --git a/tempest/api/compute/admin/test_servers.py b/tempest/api/compute/admin/test_servers.py
index 79777d0..4360586 100644
--- a/tempest/api/compute/admin/test_servers.py
+++ b/tempest/api/compute/admin/test_servers.py
@@ -35,14 +35,15 @@
         super(ServersAdminTestJSON, cls).resource_setup()
 
         cls.s1_name = data_utils.rand_name(cls.__name__ + '-server')
-        server = cls.create_test_server(name=cls.s1_name,
-                                        wait_until='ACTIVE')
+        server = cls.create_test_server(name=cls.s1_name)
         cls.s1_id = server['id']
 
         cls.s2_name = data_utils.rand_name(cls.__name__ + '-server')
         server = cls.create_test_server(name=cls.s2_name,
                                         wait_until='ACTIVE')
         cls.s2_id = server['id']
+        waiters.wait_for_server_status(cls.non_admin_client,
+                                       cls.s1_id, 'ACTIVE')
 
     @decorators.idempotent_id('06f960bb-15bb-48dc-873d-f96e89be7870')
     def test_list_servers_filter_by_error_status(self):
diff --git a/tempest/api/compute/servers/test_list_servers_negative.py b/tempest/api/compute/servers/test_list_servers_negative.py
index 3010caf..2e3d2bb 100644
--- a/tempest/api/compute/servers/test_list_servers_negative.py
+++ b/tempest/api/compute/servers/test_list_servers_negative.py
@@ -36,8 +36,7 @@
         # servers are cleaned up automatically in the
         # tearDownClass method of the super-class.
         cls.deleted_fixtures = []
-        for _ in range(2):
-            srv = cls.create_test_server(wait_until='ACTIVE')
+        cls.create_test_server(wait_until='ACTIVE', min_count=2)
 
         srv = cls.create_test_server(wait_until='ACTIVE')
         cls.client.delete_server(srv['id'])
diff --git a/tempest/api/identity/admin/v3/test_projects.py b/tempest/api/identity/admin/v3/test_projects.py
index 77a5c69..258581b 100644
--- a/tempest/api/identity/admin/v3/test_projects.py
+++ b/tempest/api/identity/admin/v3/test_projects.py
@@ -13,8 +13,6 @@
 #    License for the specific language governing permissions and limitations
 #    under the License.
 
-import testtools
-
 from tempest.api.identity import base
 from tempest import config
 from tempest.lib.common.utils import data_utils
@@ -57,8 +55,6 @@
         self.assertEqual(project_name, body['name'])
         self.assertEqual(domain['id'], body['domain_id'])
 
-    @testtools.skipUnless(CONF.identity_feature_enabled.reseller,
-                          'Reseller not available.')
     @decorators.idempotent_id('1854f9c0-70bc-4d11-a08a-1c789d339e3d')
     def test_project_create_with_parent(self):
         # Create root project without providing a parent_id
@@ -89,8 +85,6 @@
         self.assertEqual(root_project_id, parent_id)
 
     @decorators.idempotent_id('a7eb9416-6f9b-4dbb-b71b-7f73aaef59d5')
-    @testtools.skipUnless(CONF.identity_feature_enabled.reseller,
-                          'Reseller not available.')
     def test_create_is_domain_project(self):
         project_name = data_utils.rand_name('is_domain_project')
         project = self.projects_client.create_project(
diff --git a/tempest/api/network/admin/test_l3_agent_scheduler.py b/tempest/api/network/admin/test_l3_agent_scheduler.py
index 42a8f34..e7460af 100644
--- a/tempest/api/network/admin/test_l3_agent_scheduler.py
+++ b/tempest/api/network/admin/test_l3_agent_scheduler.py
@@ -28,7 +28,6 @@
 
 class L3AgentSchedulerTestJSON(base.BaseAdminNetworkTest):
     _agent_mode = 'legacy'
-    is_dvr_router = False
 
     """
     Tests the following operations in the Neutron API using the REST client for
@@ -68,46 +67,6 @@
             raise exceptions.InvalidConfiguration(msg)
         cls.router = cls.create_router()
 
-        # TODO(ylobankov): Delete this 'if' block once 'dvr_extra_resources'
-        # option is deleted. Currently this option is deprecated for removal.
-        if CONF.network.dvr_extra_resources:
-            # NOTE(armax): If DVR is an available extension, and the created
-            # router is indeed a distributed one, more resources need to be
-            # provisioned in order to bind the router to the L3 agent in the
-            # Liberty release or older, and are not required since the Mitaka
-            # release.
-            if test.is_extension_enabled('dvr', 'network'):
-                cls.is_dvr_router = cls.admin_routers_client.show_router(
-                    cls.router['id'])['router'].get('distributed', False)
-                if cls.is_dvr_router:
-                    cls.network = cls.create_network()
-                    cls.create_subnet(cls.network)
-                    cls.port = cls.create_port(cls.network)
-                    cls.routers_client.add_router_interface(
-                        cls.router['id'], port_id=cls.port['id'])
-                    # NOTE: Sometimes we have seen this test fail with dvr in,
-                    # multinode tests, since the dhcp port is not created
-                    # before the test gets executed and so the router is not
-                    # scheduled on the given agent. By adding the external
-                    # gateway info to the router, the router should be properly
-                    # scheduled in the dvr_snat node. This is a temporary work
-                    # around to prevent a race condition.
-                    external_gateway_info = {
-                        'network_id': CONF.network.public_network_id,
-                        'enable_snat': True}
-                    cls.admin_routers_client.update_router(
-                        cls.router['id'],
-                        external_gateway_info=external_gateway_info)
-
-    # TODO(ylobankov): Delete this cleanup block once 'dvr_extra_resources'
-    # option is deleted. Currently this option is deprecated for removal.
-    @classmethod
-    def resource_cleanup(cls):
-        if cls.is_dvr_router:
-            cls.routers_client.remove_router_interface(cls.router['id'],
-                                                       port_id=cls.port['id'])
-        super(L3AgentSchedulerTestJSON, cls).resource_cleanup()
-
     @decorators.idempotent_id('b7ce6e89-e837-4ded-9b78-9ed3c9c6a45a')
     def test_list_routers_on_l3_agent(self):
         self.admin_agents_client.list_routers_on_l3_agent(self.agent['id'])
diff --git a/tempest/api/volume/admin/test_volume_quotas.py b/tempest/api/volume/admin/test_volume_quotas.py
index 8bf416a..58ca92f 100644
--- a/tempest/api/volume/admin/test_volume_quotas.py
+++ b/tempest/api/volume/admin/test_volume_quotas.py
@@ -32,6 +32,12 @@
         cls.demo_tenant_id = cls.os.credentials.tenant_id
         cls.alt_client = cls.os_alt.volumes_client
 
+    @classmethod
+    def setup_clients(cls):
+        super(BaseVolumeQuotasAdminTestJSON, cls).setup_clients()
+        cls.transfer_client = cls.os.volume_transfers_v2_client
+        cls.alt_transfer_client = cls.os_alt.volume_transfers_v2_client
+
     @decorators.idempotent_id('59eada70-403c-4cef-a2a3-a8ce2f1b07a0')
     def test_list_quotas(self):
         quotas = (self.admin_quotas_client.show_quota_set(self.demo_tenant_id)
@@ -136,13 +142,13 @@
             self.alt_client.tenant_id, params={'usage': True})['quota_set']
 
         # Creates a volume transfer
-        transfer = self.volumes_client.create_volume_transfer(
+        transfer = self.transfer_client.create_volume_transfer(
             volume_id=volume['id'])['transfer']
         transfer_id = transfer['id']
         auth_key = transfer['auth_key']
 
         # Accepts a volume transfer
-        self.alt_client.accept_volume_transfer(
+        self.alt_transfer_client.accept_volume_transfer(
             transfer_id, auth_key=auth_key)['transfer']
 
         # Verify volume transferred is available
diff --git a/tempest/api/volume/base.py b/tempest/api/volume/base.py
index 0cd5ec7..a19af5d 100644
--- a/tempest/api/volume/base.py
+++ b/tempest/api/volume/base.py
@@ -147,6 +147,9 @@
         """Wrapper utility that returns a test backup."""
         if backup_client is None:
             backup_client = self.backups_client
+        if 'name' not in kwargs:
+            name = data_utils.rand_name(self.__class__.__name__ + '-Backup')
+            kwargs['name'] = name
 
         backup = backup_client.create_backup(
             volume_id=volume_id, **kwargs)['backup']
diff --git a/tempest/api/volume/test_volume_transfers.py b/tempest/api/volume/test_volume_transfers.py
index bfb42c6..afcffc2 100644
--- a/tempest/api/volume/test_volume_transfers.py
+++ b/tempest/api/volume/test_volume_transfers.py
@@ -28,15 +28,18 @@
     def setup_clients(cls):
         super(VolumesTransfersTest, cls).setup_clients()
 
-        cls.client = cls.volumes_client
-        cls.alt_client = cls.os_alt.volumes_client
-        cls.adm_client = cls.os_adm.volumes_client
+        cls.client = cls.os.volume_transfers_v2_client
+        cls.alt_client = cls.os_alt.volume_transfers_v2_client
+        cls.alt_volumes_client = cls.os_alt.volumes_v2_client
+        cls.adm_volumes_client = cls.os_adm.volumes_v2_client
 
     @decorators.idempotent_id('4d75b645-a478-48b1-97c8-503f64242f1a')
     def test_create_get_list_accept_volume_transfer(self):
         # Create a volume first
         volume = self.create_volume()
-        self.addCleanup(self.delete_volume, self.adm_client, volume['id'])
+        self.addCleanup(self.delete_volume,
+                        self.adm_volumes_client,
+                        volume['id'])
 
         # Create a volume transfer
         transfer = self.client.create_volume_transfer(
@@ -44,7 +47,7 @@
         transfer_id = transfer['id']
         auth_key = transfer['auth_key']
         waiters.wait_for_volume_resource_status(
-            self.client, volume['id'], 'awaiting-transfer')
+            self.volumes_client, volume['id'], 'awaiting-transfer')
 
         # Get a volume transfer
         body = self.client.show_volume_transfer(transfer_id)['transfer']
@@ -58,21 +61,23 @@
         # Accept a volume transfer by alt_tenant
         body = self.alt_client.accept_volume_transfer(
             transfer_id, auth_key=auth_key)['transfer']
-        waiters.wait_for_volume_resource_status(self.alt_client,
+        waiters.wait_for_volume_resource_status(self.alt_volumes_client,
                                                 volume['id'], 'available')
 
     @decorators.idempotent_id('ab526943-b725-4c07-b875-8e8ef87a2c30')
     def test_create_list_delete_volume_transfer(self):
         # Create a volume first
         volume = self.create_volume()
-        self.addCleanup(self.delete_volume, self.adm_client, volume['id'])
+        self.addCleanup(self.delete_volume,
+                        self.adm_volumes_client,
+                        volume['id'])
 
         # Create a volume transfer
         body = self.client.create_volume_transfer(
             volume_id=volume['id'])['transfer']
         transfer_id = body['id']
         waiters.wait_for_volume_resource_status(
-            self.client, volume['id'], 'awaiting-transfer')
+            self.volumes_client, volume['id'], 'awaiting-transfer')
 
         # List all volume transfers (looking for the one we created)
         body = self.client.list_volume_transfers()['transfers']
@@ -85,4 +90,4 @@
         # Delete a volume transfer
         self.client.delete_volume_transfer(transfer_id)
         waiters.wait_for_volume_resource_status(
-            self.client, volume['id'], 'available')
+            self.volumes_client, volume['id'], 'available')
diff --git a/tempest/api/volume/test_volumes_list.py b/tempest/api/volume/test_volumes_list.py
index 0570797..b6b5ab4 100644
--- a/tempest/api/volume/test_volumes_list.py
+++ b/tempest/api/volume/test_volumes_list.py
@@ -13,8 +13,11 @@
 #    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
 #    License for the specific language governing permissions and limitations
 #    under the License.
-import operator
 
+import operator
+import random
+
+from six.moves.urllib import parse
 from testtools import matchers
 
 from tempest.api.volume import base
@@ -59,6 +62,10 @@
     def resource_setup(cls):
         super(VolumesListTestJSON, cls).resource_setup()
         cls.name = cls.VOLUME_FIELDS[1]
+
+        existing_volumes = cls.volumes_client.list_volumes()['volumes']
+        cls.volume_id_list = [vol['id'] for vol in existing_volumes]
+
         # Create 3 test volumes
         cls.volume_list = []
         cls.metadata = {'Type': 'work'}
@@ -66,6 +73,7 @@
             volume = cls.create_volume(metadata=cls.metadata)
             volume = cls.volumes_client.show_volume(volume['id'])['volume']
             cls.volume_list.append(volume)
+            cls.volume_id_list.append(volume['id'])
 
     def _list_by_param_value_and_assert(self, params, with_detail=False):
         """list or list_details with given params and validates result"""
@@ -217,3 +225,160 @@
         params = {self.name: volume[self.name],
                   'status': 'available'}
         self._list_by_param_value_and_assert(params, with_detail=True)
+
+    @decorators.idempotent_id('2a7064eb-b9c3-429b-b888-33928fc5edd3')
+    def test_volume_list_details_with_multiple_params(self):
+        # List volumes detail using combined condition
+        def _list_details_with_multiple_params(limit=2,
+                                               status='available',
+                                               sort_dir='asc',
+                                               sort_key='id'):
+            params = {'limit': limit,
+                      'status': status,
+                      'sort_dir': sort_dir,
+                      'sort_key': sort_key
+                      }
+            fetched_volume = self.volumes_client.list_volumes(
+                detail=True, params=params)['volumes']
+            self.assertEqual(limit, len(fetched_volume),
+                             "The count of volumes is %s, expected:%s " %
+                             (len(fetched_volume), limit))
+            self.assertEqual(status, fetched_volume[0]['status'])
+            self.assertEqual(status, fetched_volume[1]['status'])
+            val0 = fetched_volume[0][sort_key]
+            val1 = fetched_volume[1][sort_key]
+            if sort_dir == 'asc':
+                self.assertLess(val0, val1,
+                                "list is not in asc order with sort_key: %s."
+                                " %s" % (sort_key, fetched_volume))
+            elif sort_dir == 'desc':
+                self.assertGreater(val0, val1,
+                                   "list is not in desc order with sort_key: "
+                                   "%s. %s" % (sort_key, fetched_volume))
+
+        _list_details_with_multiple_params()
+        _list_details_with_multiple_params(sort_dir='desc')
+
+    def _test_pagination(self, resource, ids=None, limit=1, **kwargs):
+        """Check list pagination functionality for a resource.
+
+        This method requests the list of resources and follows pagination
+        links.
+
+        If an iterable is supplied in ids it will check that all ids are
+        retrieved and that only those are listed, that we will get a next
+        link for an empty page if the number of items is divisible by used
+        limit (this is expected behavior).
+
+        We can specify number of items per request using limit argument.
+        """
+
+        # Get list method for the type of resource from the client
+        client = getattr(self, resource + '_client')
+        method = getattr(client, 'list_' + resource)
+
+        # Include limit in params for list request
+        params = kwargs.pop('params', {})
+        params['limit'] = limit
+
+        # Store remaining items we are expecting from list
+        if ids is not None:
+            remaining = list(ids)
+        else:
+            remaining = None
+
+        # Mark that the current iteration is not from a 'next' link
+        next = None
+
+        while True:
+            # Get a list page
+            response = method(params=params, **kwargs)
+
+            # If we have to check ids
+            if remaining is not None:
+                # Confirm we receive expected number of elements
+                num_expected = min(len(remaining), limit)
+                self.assertEqual(num_expected, len(response[resource]),
+                                 'Requested %(#expect)d but got %(#received)d '
+                                 % {'#expect': num_expected,
+                                    '#received': len(response[resource])})
+
+                # For each received element
+                for element in response[resource]:
+                    element_id = element['id']
+                    # Check it's one of expected ids
+                    self.assertIn(element_id,
+                                  ids,
+                                  'Id %(id)s is not in expected ids %(ids)s' %
+                                  {'id': element_id, 'ids': ids})
+                    # If not in remaining, we have received it twice
+                    self.assertIn(element_id,
+                                  remaining,
+                                  'Id %s was received twice' % element_id)
+                    # We no longer expect it
+                    remaining.remove(element_id)
+
+            # If the current iteration is from a 'next' link, check that the
+            # absolute url is the same as the one used for this request
+            if next:
+                self.assertEqual(next, response.response['content-location'])
+
+            # Get next from response
+            next = None
+            for link in response.get(resource + '_links', ()):
+                if link['rel'] == 'next':
+                    next = link['href']
+                    break
+
+            # Check if we have next and we shouldn't or the other way around
+            if remaining is not None:
+                if remaining or (num_expected and len(ids) % limit == 0):
+                    self.assertIsNotNone(next, 'Missing link to next page')
+                else:
+                    self.assertIsNone(next, 'Unexpected link to next page')
+
+            # If we can follow to the next page, get params from url to make
+            # request in the form of a relative URL
+            if next:
+                params = parse.urlparse(next).query
+
+            # If cannot follow make sure it's because we have finished
+            else:
+                self.assertEqual([], remaining or [],
+                                 'No more pages reported, but still '
+                                 'missing ids %s' % remaining)
+                break
+
+    @decorators.idempotent_id('e9138a2c-f67b-4796-8efa-635c196d01de')
+    def test_volume_list_details_pagination(self):
+        self._test_pagination('volumes', ids=self.volume_id_list, detail=True)
+
+    @decorators.idempotent_id('af55e775-8e4b-4feb-8719-215c43b0238c')
+    def test_volume_list_pagination(self):
+        self._test_pagination('volumes', ids=self.volume_id_list, detail=False)
+
+    @decorators.idempotent_id('46eff077-100b-427f-914e-3db2abcdb7e2')
+    @decorators.skip_because(bug='1572765')
+    def test_volume_list_with_detail_param_marker(self):
+        # Choosing a random volume from a list of volumes for 'marker'
+        # parameter
+        random_volume = random.choice(self.volume_id_list)
+
+        params = {'marker': random_volume}
+
+        # Running volume list using marker parameter
+        vol_with_marker = self.volumes_client.list_volumes(
+            detail=True, params=params)['volumes']
+
+        # Fetching the index of the random volume from volume_id_list
+        index_marker = self.volume_id_list.index(random_volume)
+
+        # The expected list with marker parameter
+        verify_volume_list = self.volume_id_list[:index_marker]
+
+        failed_msg = "Failed to list volume details by marker"
+
+        # Validating the expected list is the same like the observed list
+        self.assertEqual(verify_volume_list,
+                         map(lambda x: x['id'],
+                             vol_with_marker[::-1]), failed_msg)
diff --git a/tempest/api/volume/test_volumes_snapshots.py b/tempest/api/volume/test_volumes_snapshots.py
index 504875b..8ffc99d 100644
--- a/tempest/api/volume/test_volumes_snapshots.py
+++ b/tempest/api/volume/test_volumes_snapshots.py
@@ -102,6 +102,7 @@
         self.assertEqual(self.volume_origin['id'],
                          snap_get['volume_id'],
                          "Referred volume origin mismatch")
+        self.assertEqual(self.volume_origin['size'], snap_get['size'])
 
         # Verify snapshot metadata
         self.assertThat(snap_get['metadata'].items(),
@@ -135,7 +136,8 @@
 
     @decorators.idempotent_id('677863d1-3142-456d-b6ac-9924f667a7f4')
     def test_volume_from_snapshot(self):
-        # Creates a volume a snapshot passing a size different from the source
+        # Creates a volume from a snapshot passing a size
+        # different from the source
         src_size = CONF.volume.volume_size
 
         src_vol = self.create_volume(size=src_size)
diff --git a/tempest/api/volume/test_volumes_snapshots_list.py b/tempest/api/volume/test_volumes_snapshots_list.py
index 68eb181..507df1f 100644
--- a/tempest/api/volume/test_volumes_snapshots_list.py
+++ b/tempest/api/volume/test_volumes_snapshots_list.py
@@ -28,10 +28,14 @@
     @classmethod
     def resource_setup(cls):
         super(VolumesSnapshotListTestJSON, cls).resource_setup()
+        cls.snapshot_id_list = []
         volume_origin = cls.create_volume()
+
         # Create snapshots with params
-        for _ in range(2):
-            cls.snapshot = cls.create_snapshot(volume_origin['id'])
+        for _ in range(3):
+            snapshot = cls.create_snapshot(volume_origin['id'])
+            cls.snapshot_id_list.append(snapshot['id'])
+        cls.snapshot = snapshot
 
     def _list_by_param_values_and_assert(self, with_detail=False, **params):
         """list or list_details with given params and validates result."""
@@ -101,3 +105,56 @@
     def test_snapshot_list_param_limit_equals_zero(self):
         # List returns zero elements
         self._list_snapshots_by_param_limit(limit=0, expected_elements=0)
+
+    def _list_snapshots_param_sort(self, sort_key, sort_dir):
+        """list snapshots by sort param"""
+        snap_list = self.snapshots_client.list_snapshots(
+            sort_key=sort_key, sort_dir=sort_dir)['snapshots']
+        self.assertNotEmpty(snap_list)
+        if sort_key is 'display_name':
+            sort_key = 'name'
+        # Note: On Cinder API, 'display_name' works as a sort key
+        # on a request, a volume name appears as 'name' on the response.
+        # So Tempest needs to change the key name here for this inconsistent
+        # API behavior.
+        sorted_list = [snapshot[sort_key] for snapshot in snap_list]
+        msg = 'The list of snapshots was not sorted correctly.'
+        self.assertEqual(sorted(sorted_list, reverse=(sort_dir == 'desc')),
+                         sorted_list, msg)
+
+    @decorators.idempotent_id('c5513ada-64c1-4d28-83b9-af3307ec1388')
+    def test_snapshot_list_param_sort_id_asc(self):
+        self._list_snapshots_param_sort(sort_key='id', sort_dir='asc')
+
+    @decorators.idempotent_id('8a7fe058-0b41-402a-8afd-2dbc5a4a718b')
+    def test_snapshot_list_param_sort_id_desc(self):
+        self._list_snapshots_param_sort(sort_key='id', sort_dir='desc')
+
+    @decorators.idempotent_id('4052c3a0-2415-440a-a8cc-305a875331b0')
+    def test_snapshot_list_param_sort_created_at_asc(self):
+        self._list_snapshots_param_sort(sort_key='created_at', sort_dir='asc')
+
+    @decorators.idempotent_id('dcbbe24a-f3c0-4ec8-9274-55d48db8d1cf')
+    def test_snapshot_list_param_sort_created_at_desc(self):
+        self._list_snapshots_param_sort(sort_key='created_at', sort_dir='desc')
+
+    @decorators.idempotent_id('d58b5fed-0c37-42d3-8c5d-39014ac13c00')
+    def test_snapshot_list_param_sort_name_asc(self):
+        self._list_snapshots_param_sort(sort_key='display_name',
+                                        sort_dir='asc')
+
+    @decorators.idempotent_id('96ba6f4d-1f18-47e1-b4bc-76edc6c21250')
+    def test_snapshot_list_param_sort_name_desc(self):
+        self._list_snapshots_param_sort(sort_key='display_name',
+                                        sort_dir='desc')
+
+    @decorators.idempotent_id('05489dde-44bc-4961-a1f5-3ce7ee7824f7')
+    def test_snapshot_list_param_marker(self):
+        # The list of snapshots should end before the provided marker
+        params = {'marker': self.snapshot_id_list[1]}
+        snap_list = self.snapshots_client.list_snapshots(**params)['snapshots']
+        fetched_list_id = [snap['id'] for snap in snap_list]
+        # Verify the list of snapshots ends before the provided
+        # marker(second snapshot), therefore only the first snapshot
+        # should displayed.
+        self.assertEqual(self.snapshot_id_list[:1], fetched_list_id)
diff --git a/tempest/api/volume/v2/__init__.py b/tempest/api/volume/v2/__init__.py
deleted file mode 100644
index e69de29..0000000
--- a/tempest/api/volume/v2/__init__.py
+++ /dev/null
diff --git a/tempest/api/volume/v2/test_volumes_list.py b/tempest/api/volume/v2/test_volumes_list.py
deleted file mode 100644
index e7adcd6..0000000
--- a/tempest/api/volume/v2/test_volumes_list.py
+++ /dev/null
@@ -1,203 +0,0 @@
-# Copyright 2012 OpenStack Foundation
-# Copyright 2013 IBM Corp.
-# All Rights Reserved.
-#
-#    Licensed under the Apache License, Version 2.0 (the "License"); you may
-#    not use this file except in compliance with the License. You may obtain
-#    a copy of the License at
-#
-#         http://www.apache.org/licenses/LICENSE-2.0
-#
-#    Unless required by applicable law or agreed to in writing, software
-#    distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
-#    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
-#    License for the specific language governing permissions and limitations
-#    under the License.
-
-import random
-
-from six.moves.urllib import parse
-
-from tempest.api.volume import base
-from tempest.lib import decorators
-
-
-class VolumesListTestJSON(base.BaseVolumeTest):
-    """volumes tests.
-
-    This test creates a number of 1G volumes. To run successfully,
-    ensure that the backing file for the volume group that Nova uses
-    has space for at least 3 1G volumes!
-    If you are running a Devstack environment, ensure that the
-    VOLUME_BACKING_FILE_SIZE is at least 4G in your localrc
-    """
-
-    @classmethod
-    def resource_setup(cls):
-        super(VolumesListTestJSON, cls).resource_setup()
-
-        # Create 3 test volumes
-        # NOTE(zhufl): When using pre-provisioned credentials, the project
-        # may have volumes other than those created below.
-        existing_volumes = cls.volumes_client.list_volumes()['volumes']
-        cls.volume_id_list = [vol['id'] for vol in existing_volumes]
-        for _ in range(3):
-            volume = cls.create_volume()
-            cls.volume_id_list.append(volume['id'])
-
-    @decorators.idempotent_id('2a7064eb-b9c3-429b-b888-33928fc5edd3')
-    def test_volume_list_details_with_multiple_params(self):
-        # List volumes detail using combined condition
-        def _list_details_with_multiple_params(limit=2,
-                                               status='available',
-                                               sort_dir='asc',
-                                               sort_key='id'):
-            params = {'limit': limit,
-                      'status': status,
-                      'sort_dir': sort_dir,
-                      'sort_key': sort_key
-                      }
-            fetched_volume = self.volumes_client.list_volumes(
-                detail=True, params=params)['volumes']
-            self.assertEqual(limit, len(fetched_volume),
-                             "The count of volumes is %s, expected:%s " %
-                             (len(fetched_volume), limit))
-            self.assertEqual(status, fetched_volume[0]['status'])
-            self.assertEqual(status, fetched_volume[1]['status'])
-            val0 = fetched_volume[0][sort_key]
-            val1 = fetched_volume[1][sort_key]
-            if sort_dir == 'asc':
-                self.assertLess(val0, val1,
-                                "list is not in asc order with sort_key: %s."
-                                " %s" % (sort_key, fetched_volume))
-            elif sort_dir == 'desc':
-                self.assertGreater(val0, val1,
-                                   "list is not in desc order with sort_key: "
-                                   "%s. %s" % (sort_key, fetched_volume))
-
-        _list_details_with_multiple_params()
-        _list_details_with_multiple_params(sort_dir='desc')
-
-    def _test_pagination(self, resource, ids=None, limit=1, **kwargs):
-        """Check list pagination functionality for a resource.
-
-        This method requests the list of resources and follows pagination
-        links.
-
-        If an iterable is supplied in ids it will check that all ids are
-        retrieved and that only those are listed, that we will get a next
-        link for an empty page if the number of items is divisible by used
-        limit (this is expected behavior).
-
-        We can specify number of items per request using limit argument.
-        """
-
-        # Get list method for the type of resource from the client
-        client = getattr(self, resource + '_client')
-        method = getattr(client, 'list_' + resource)
-
-        # Include limit in params for list request
-        params = kwargs.pop('params', {})
-        params['limit'] = limit
-
-        # Store remaining items we are expecting from list
-        if ids is not None:
-            remaining = list(ids)
-        else:
-            remaining = None
-
-        # Mark that the current iteration is not from a 'next' link
-        next = None
-
-        while True:
-            # Get a list page
-            response = method(params=params, **kwargs)
-
-            # If we have to check ids
-            if remaining is not None:
-                # Confirm we receive expected number of elements
-                num_expected = min(len(remaining), limit)
-                self.assertEqual(num_expected, len(response[resource]),
-                                 'Requested %(#expect)d but got %(#received)d '
-                                 % {'#expect': num_expected,
-                                    '#received': len(response[resource])})
-
-                # For each received element
-                for element in response[resource]:
-                    element_id = element['id']
-                    # Check it's one of expected ids
-                    self.assertIn(element_id,
-                                  ids,
-                                  'Id %(id)s is not in expected ids %(ids)s' %
-                                  {'id': element_id, 'ids': ids})
-                    # If not in remaining, we have received it twice
-                    self.assertIn(element_id,
-                                  remaining,
-                                  'Id %s was received twice' % element_id)
-                    # We no longer expect it
-                    remaining.remove(element_id)
-
-            # If the current iteration is from a 'next' link, check that the
-            # absolute url is the same as the one used for this request
-            if next:
-                self.assertEqual(next, response.response['content-location'])
-
-            # Get next from response
-            next = None
-            for link in response.get(resource + '_links', ()):
-                if link['rel'] == 'next':
-                    next = link['href']
-                    break
-
-            # Check if we have next and we shouldn't or the other way around
-            if remaining is not None:
-                if remaining or (num_expected and len(ids) % limit == 0):
-                    self.assertIsNotNone(next, 'Missing link to next page')
-                else:
-                    self.assertIsNone(next, 'Unexpected link to next page')
-
-            # If we can follow to the next page, get params from url to make
-            # request in the form of a relative URL
-            if next:
-                params = parse.urlparse(next).query
-
-            # If cannot follow make sure it's because we have finished
-            else:
-                self.assertEqual([], remaining or [],
-                                 'No more pages reported, but still '
-                                 'missing ids %s' % remaining)
-                break
-
-    @decorators.idempotent_id('e9138a2c-f67b-4796-8efa-635c196d01de')
-    def test_volume_list_details_pagination(self):
-        self._test_pagination('volumes', ids=self.volume_id_list, detail=True)
-
-    @decorators.idempotent_id('af55e775-8e4b-4feb-8719-215c43b0238c')
-    def test_volume_list_pagination(self):
-        self._test_pagination('volumes', ids=self.volume_id_list, detail=False)
-
-    @decorators.idempotent_id('46eff077-100b-427f-914e-3db2abcdb7e2')
-    @decorators.skip_because(bug='1572765')
-    def test_volume_list_with_detail_param_marker(self):
-        # Choosing a random volume from a list of volumes for 'marker'
-        # parameter
-        random_volume = random.choice(self.volume_id_list)
-
-        params = {'marker': random_volume}
-
-        # Running volume list using marker parameter
-        vol_with_marker = self.volumes_client.list_volumes(
-            detail=True, params=params)['volumes']
-
-        # Fetching the index of the random volume from volume_id_list
-        index_marker = self.volume_id_list.index(random_volume)
-
-        # The expected list with marker parameter
-        verify_volume_list = self.volume_id_list[:index_marker]
-
-        failed_msg = "Failed to list volume details by marker"
-
-        # Validating the expected list is the same like the observed list
-        self.assertEqual(verify_volume_list,
-                         map(lambda x: x['id'],
-                             vol_with_marker[::-1]), failed_msg)
diff --git a/tempest/api/volume/v2/test_volumes_snapshots_list.py b/tempest/api/volume/v2/test_volumes_snapshots_list.py
deleted file mode 100644
index bfed67b..0000000
--- a/tempest/api/volume/v2/test_volumes_snapshots_list.py
+++ /dev/null
@@ -1,93 +0,0 @@
-# Copyright 2016 Red Hat, Inc.
-# All Rights Reserved.
-#
-#    Licensed under the Apache License, Version 2.0 (the "License"); you may
-#    not use this file except in compliance with the License. You may obtain
-#    a copy of the License at
-#
-#         http://www.apache.org/licenses/LICENSE-2.0
-#
-#    Unless required by applicable law or agreed to in writing, software
-#    distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
-#    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
-#    License for the specific language governing permissions and limitations
-#    under the License.
-
-from tempest.api.volume import base
-from tempest import config
-from tempest.lib import decorators
-
-CONF = config.CONF
-
-
-class VolumesSnapshotListTestJSON(base.BaseVolumeTest):
-
-    @classmethod
-    def skip_checks(cls):
-        super(VolumesSnapshotListTestJSON, cls).skip_checks()
-        if not CONF.volume_feature_enabled.snapshot:
-            raise cls.skipException("Cinder volume snapshots are disabled")
-
-    @classmethod
-    def resource_setup(cls):
-        super(VolumesSnapshotListTestJSON, cls).resource_setup()
-        cls.snapshot_id_list = []
-        # Create a volume
-        volume_origin = cls.create_volume()
-        # Create 3 snapshots
-        for _ in range(3):
-            snapshot = cls.create_snapshot(volume_origin['id'])
-            cls.snapshot_id_list.append(snapshot['id'])
-
-    def _list_snapshots_param_sort(self, sort_key, sort_dir):
-        """list snapshots by sort param"""
-        snap_list = self.snapshots_client.list_snapshots(
-            sort_key=sort_key, sort_dir=sort_dir)['snapshots']
-        self.assertNotEmpty(snap_list)
-        if sort_key is 'display_name':
-            sort_key = 'name'
-        # Note: On Cinder API, 'display_name' works as a sort key
-        # on a request, a volume name appears as 'name' on the response.
-        # So Tempest needs to change the key name here for this inconsistent
-        # API behavior.
-        sorted_list = [snapshot[sort_key] for snapshot in snap_list]
-        msg = 'The list of snapshots was not sorted correctly.'
-        self.assertEqual(sorted(sorted_list, reverse=(sort_dir == 'desc')),
-                         sorted_list, msg)
-
-    @decorators.idempotent_id('c5513ada-64c1-4d28-83b9-af3307ec1388')
-    def test_snapshot_list_param_sort_id_asc(self):
-        self._list_snapshots_param_sort(sort_key='id', sort_dir='asc')
-
-    @decorators.idempotent_id('8a7fe058-0b41-402a-8afd-2dbc5a4a718b')
-    def test_snapshot_list_param_sort_id_desc(self):
-        self._list_snapshots_param_sort(sort_key='id', sort_dir='desc')
-
-    @decorators.idempotent_id('4052c3a0-2415-440a-a8cc-305a875331b0')
-    def test_snapshot_list_param_sort_created_at_asc(self):
-        self._list_snapshots_param_sort(sort_key='created_at', sort_dir='asc')
-
-    @decorators.idempotent_id('dcbbe24a-f3c0-4ec8-9274-55d48db8d1cf')
-    def test_snapshot_list_param_sort_created_at_desc(self):
-        self._list_snapshots_param_sort(sort_key='created_at', sort_dir='desc')
-
-    @decorators.idempotent_id('d58b5fed-0c37-42d3-8c5d-39014ac13c00')
-    def test_snapshot_list_param_sort_name_asc(self):
-        self._list_snapshots_param_sort(sort_key='display_name',
-                                        sort_dir='asc')
-
-    @decorators.idempotent_id('96ba6f4d-1f18-47e1-b4bc-76edc6c21250')
-    def test_snapshot_list_param_sort_name_desc(self):
-        self._list_snapshots_param_sort(sort_key='display_name',
-                                        sort_dir='desc')
-
-    @decorators.idempotent_id('05489dde-44bc-4961-a1f5-3ce7ee7824f7')
-    def test_snapshot_list_param_marker(self):
-        # The list of snapshots should end before the provided marker
-        params = {'marker': self.snapshot_id_list[1]}
-        snap_list = self.snapshots_client.list_snapshots(**params)['snapshots']
-        fetched_list_id = [snap['id'] for snap in snap_list]
-        # Verify the list of snapshots ends before the provided
-        # marker(second snapshot), therefore only the first snapshot
-        # should displayed.
-        self.assertEqual(self.snapshot_id_list[:1], fetched_list_id)
diff --git a/tempest/clients.py b/tempest/clients.py
index 71c3d41..01abfd8 100644
--- a/tempest/clients.py
+++ b/tempest/clients.py
@@ -287,6 +287,8 @@
             self.volume_v2.CapabilitiesClient()
         self.volume_scheduler_stats_v2_client = \
             self.volume_v2.SchedulerStatsClient()
+        self.volume_transfers_v2_client = \
+            self.volume_v2.TransfersClient()
 
     def _set_object_storage_clients(self):
         # Mandatory parameters (always defined)
diff --git a/tempest/config.py b/tempest/config.py
index 24651f1..5f9a04e 100644
--- a/tempest/config.py
+++ b/tempest/config.py
@@ -217,14 +217,6 @@
                      "entry all which indicates every extension is enabled. "
                      "Empty list indicates all extensions are disabled. "
                      "To get the list of extensions run: 'keystone discover'"),
-    # TODO(rodrigods): Remove the reseller flag when Kilo and Liberty is end
-    # of life.
-    cfg.BoolOpt('reseller',
-                default=True,
-                help='Does the environment support reseller?',
-                deprecated_for_removal=True,
-                deprecated_reason="All supported versions of OpenStack now "
-                                  "support the 'reseller' feature"),
     # TODO(rodrigods): This is a feature flag for bug 1590578 which is fixed
     # in Newton and Ocata. This option can be removed after Mitaka is end of
     # life.
@@ -336,15 +328,6 @@
                                       title="Enabled Compute Service Features")
 
 ComputeFeaturesGroup = [
-    # NOTE(mriedem): This is a feature toggle for bug 1175464 which is fixed in
-    # mitaka and newton. This option can be removed after liberty-eol.
-    cfg.BoolOpt('allow_port_security_disabled',
-                default=True,
-                help='Does the test environment support creating ports in a '
-                     'network where port security is disabled?',
-                deprecated_for_removal=True,
-                deprecated_reason='This config switch was added for Liberty '
-                                  'which is not supported anymore.'),
     cfg.BoolOpt('disk_config',
                 default=True,
                 help="If false, skip disk config tests"),
@@ -613,17 +596,6 @@
                 default=False,
                 help="The environment does not support network separation "
                      "between tenants."),
-    cfg.BoolOpt('dvr_extra_resources',
-                default=False,
-                help="Whether or not to create internal network, subnet, "
-                     "port and add network interface to distributed router "
-                     "in L3 agent scheduler test. Extra resources need to be "
-                     "provisioned in order to bind router to L3 agent in the "
-                     "Liberty release or older, and are not required since "
-                     "the Mitaka release.",
-                deprecated_for_removal=True,
-                deprecated_reason='This config switch was added for Liberty '
-                                  'which is not supported anymore.')
 ]
 
 network_feature_group = cfg.OptGroup(name='network-feature-enabled',
diff --git a/tempest/lib/cmd/check_uuid.py b/tempest/lib/cmd/check_uuid.py
index e911776..101d692 100755
--- a/tempest/lib/cmd/check_uuid.py
+++ b/tempest/lib/cmd/check_uuid.py
@@ -355,7 +355,7 @@
     if errors:
         sys.exit("@decorators.idempotent_id existence and uniqueness checks "
                  "failed\n"
-                 "Run 'tox -v -euuidgen' to automatically fix tests with\n"
+                 "Run 'tox -v -e uuidgen' to automatically fix tests with\n"
                  "missing @decorators.idempotent_id decorators.")
 
 if __name__ == '__main__':
diff --git a/tempest/lib/services/compute/versions_client.py b/tempest/lib/services/compute/versions_client.py
index 75984ec..8fbb136 100644
--- a/tempest/lib/services/compute/versions_client.py
+++ b/tempest/lib/services/compute/versions_client.py
@@ -12,6 +12,8 @@
 # License for the specific language governing permissions and limitations
 # under the License.
 
+import time
+
 from oslo_serialization import jsonutils as json
 
 from tempest.lib.api_schema.response.compute.v2_1 import versions as schema
@@ -23,7 +25,13 @@
 
     def list_versions(self):
         version_url = self._get_base_version_url()
+
+        start = time.time()
         resp, body = self.raw_request(version_url, 'GET')
+        end = time.time()
+        self._log_request('GET', version_url, resp, secs=(end - start),
+                          resp_body=body)
+
         self._error_checker(resp, body)
         body = json.loads(body)
         self.validate_response(schema.list_versions, resp, body)
diff --git a/tempest/lib/services/volume/v2/__init__.py b/tempest/lib/services/volume/v2/__init__.py
index b4eb771..9434896 100644
--- a/tempest/lib/services/volume/v2/__init__.py
+++ b/tempest/lib/services/volume/v2/__init__.py
@@ -30,6 +30,7 @@
 from tempest.lib.services.volume.v2.snapshot_manage_client import \
     SnapshotManageClient
 from tempest.lib.services.volume.v2.snapshots_client import SnapshotsClient
+from tempest.lib.services.volume.v2.transfers_client import TransfersClient
 from tempest.lib.services.volume.v2.types_client import TypesClient
 from tempest.lib.services.volume.v2.volume_manage_client import \
     VolumeManageClient
@@ -39,4 +40,4 @@
            'ExtensionsClient', 'HostsClient', 'QosSpecsClient', 'QuotasClient',
            'ServicesClient', 'SnapshotsClient', 'TypesClient', 'VolumesClient',
            'LimitsClient', 'CapabilitiesClient', 'SchedulerStatsClient',
-           'SnapshotManageClient', 'VolumeManageClient']
+           'SnapshotManageClient', 'VolumeManageClient', 'TransfersClient']
diff --git a/tempest/lib/services/volume/v2/transfers_client.py b/tempest/lib/services/volume/v2/transfers_client.py
new file mode 100644
index 0000000..6f21944
--- /dev/null
+++ b/tempest/lib/services/volume/v2/transfers_client.py
@@ -0,0 +1,80 @@
+# Copyright 2012 OpenStack Foundation
+# All Rights Reserved.
+#
+#    Licensed under the Apache License, Version 2.0 (the "License"); you may
+#    not use this file except in compliance with the License. You may obtain
+#    a copy of the License at
+#
+#         http://www.apache.org/licenses/LICENSE-2.0
+#
+#    Unless required by applicable law or agreed to in writing, software
+#    distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+#    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+#    License for the specific language governing permissions and limitations
+#    under the License.
+
+from oslo_serialization import jsonutils as json
+from six.moves.urllib import parse as urllib
+
+from tempest.lib.common import rest_client
+
+
+class TransfersClient(rest_client.RestClient):
+    """Client class to send CRUD Volume Transfer V2 API requests"""
+    api_version = "v2"
+
+    def create_volume_transfer(self, **kwargs):
+        """Create a volume transfer.
+
+        For a full list of available parameters, please refer to the official
+        API reference:
+        http://developer.openstack.org/api-ref/block-storage/v2/#create-volume-transfer-v2
+        """
+        post_body = json.dumps({'transfer': kwargs})
+        resp, body = self.post('os-volume-transfer', post_body)
+        body = json.loads(body)
+        self.expected_success(202, resp.status)
+        return rest_client.ResponseBody(resp, body)
+
+    def show_volume_transfer(self, transfer_id):
+        """Returns the details of a volume transfer."""
+        url = "os-volume-transfer/%s" % transfer_id
+        resp, body = self.get(url)
+        body = json.loads(body)
+        self.expected_success(200, resp.status)
+        return rest_client.ResponseBody(resp, body)
+
+    def list_volume_transfers(self, **params):
+        """List all the volume transfers created.
+
+        For a full list of available parameters, please refer to the official
+        API reference:
+        http://developer.openstack.org/api-ref/block-storage/v2/#list-volume-transfers-v2
+        """
+        url = 'os-volume-transfer'
+        if params:
+            url += '?%s' % urllib.urlencode(params)
+        resp, body = self.get(url)
+        body = json.loads(body)
+        self.expected_success(200, resp.status)
+        return rest_client.ResponseBody(resp, body)
+
+    def delete_volume_transfer(self, transfer_id):
+        """Delete a volume transfer."""
+        resp, body = self.delete("os-volume-transfer/%s" % transfer_id)
+        self.expected_success(202, resp.status)
+        return rest_client.ResponseBody(resp, body)
+
+    def accept_volume_transfer(self, transfer_id, **kwargs):
+        """Accept a volume transfer.
+
+        For a full list of available parameters, please refer to the official
+        API reference:
+        http://developer.openstack.org/api-ref/block-storage/v2/#accept-volume-transfer-v2
+        """
+        url = 'os-volume-transfer/%s/accept' % transfer_id
+        post_body = json.dumps({'accept': kwargs})
+        resp, body = self.post(url, post_body)
+        body = json.loads(body)
+        self.expected_success(202, resp.status)
+        return rest_client.ResponseBody(resp, body)
diff --git a/tempest/lib/services/volume/v2/volumes_client.py b/tempest/lib/services/volume/v2/volumes_client.py
index 72823c0..44d4d65 100644
--- a/tempest/lib/services/volume/v2/volumes_client.py
+++ b/tempest/lib/services/volume/v2/volumes_client.py
@@ -13,6 +13,7 @@
 #    License for the specific language governing permissions and limitations
 #    under the License.
 
+from debtcollector import moves
 from debtcollector import removals
 from oslo_serialization import jsonutils as json
 import six
@@ -20,12 +21,43 @@
 
 from tempest.lib.common import rest_client
 from tempest.lib import exceptions as lib_exc
+from tempest.lib.services.volume.v2 import transfers_client
 
 
 class VolumesClient(rest_client.RestClient):
     """Client class to send CRUD Volume V2 API requests"""
     api_version = "v2"
 
+    create_volume_transfer = moves.moved_function(
+        transfers_client.TransfersClient.create_volume_transfer,
+        'VolumesClient.create_volume_transfer', __name__,
+        message='Use create_volume_transfer from new location.',
+        version='Pike', removal_version='Queens')
+
+    show_volume_transfer = moves.moved_function(
+        transfers_client.TransfersClient.show_volume_transfer,
+        'VolumesClient.show_volume_transfer', __name__,
+        message='Use show_volume_transfer from new location.',
+        version='Pike', removal_version='Queens')
+
+    list_volume_transfers = moves.moved_function(
+        transfers_client.TransfersClient.list_volume_transfers,
+        'VolumesClient.list_volume_transfers', __name__,
+        message='Use list_volume_transfer from new location.',
+        version='Pike', removal_version='Queens')
+
+    delete_volume_transfer = moves.moved_function(
+        transfers_client.TransfersClient.delete_volume_transfer,
+        'VolumesClient.delete_volume_transfer', __name__,
+        message='Use delete_volume_transfer from new location.',
+        version='Pike', removal_version='Queens')
+
+    accept_volume_transfer = moves.moved_function(
+        transfers_client.TransfersClient.accept_volume_transfer,
+        'VolumesClient.accept_volume_transfer', __name__,
+        message='Use accept_volume_transfer from new location.',
+        version='Pike', removal_version='Queens')
+
     def _prepare_params(self, params):
         """Prepares params for use in get or _ext_get methods.
 
@@ -183,62 +215,6 @@
         self.expected_success(202, resp.status)
         return rest_client.ResponseBody(resp, body)
 
-    def create_volume_transfer(self, **kwargs):
-        """Create a volume transfer.
-
-        For a full list of available parameters, please refer to the official
-        API reference:
-        http://developer.openstack.org/api-ref/block-storage/v2/#create-volume-transfer
-        """
-        post_body = json.dumps({'transfer': kwargs})
-        resp, body = self.post('os-volume-transfer', post_body)
-        body = json.loads(body)
-        self.expected_success(202, resp.status)
-        return rest_client.ResponseBody(resp, body)
-
-    def show_volume_transfer(self, transfer_id):
-        """Returns the details of a volume transfer."""
-        url = "os-volume-transfer/%s" % transfer_id
-        resp, body = self.get(url)
-        body = json.loads(body)
-        self.expected_success(200, resp.status)
-        return rest_client.ResponseBody(resp, body)
-
-    def list_volume_transfers(self, **params):
-        """List all the volume transfers created.
-
-        For a full list of available parameters, please refer to the official
-        API reference:
-        http://developer.openstack.org/api-ref/block-storage/v2/#list-volume-transfers
-        """
-        url = 'os-volume-transfer'
-        if params:
-            url += '?%s' % urllib.urlencode(params)
-        resp, body = self.get(url)
-        body = json.loads(body)
-        self.expected_success(200, resp.status)
-        return rest_client.ResponseBody(resp, body)
-
-    def delete_volume_transfer(self, transfer_id):
-        """Delete a volume transfer."""
-        resp, body = self.delete("os-volume-transfer/%s" % transfer_id)
-        self.expected_success(202, resp.status)
-        return rest_client.ResponseBody(resp, body)
-
-    def accept_volume_transfer(self, transfer_id, **kwargs):
-        """Accept a volume transfer.
-
-        For a full list of available parameters, please refer to the official
-        API reference:
-        http://developer.openstack.org/api-ref/block-storage/v2/#accept-volume-transfer
-        """
-        url = 'os-volume-transfer/%s/accept' % transfer_id
-        post_body = json.dumps({'accept': kwargs})
-        resp, body = self.post(url, post_body)
-        body = json.loads(body)
-        self.expected_success(202, resp.status)
-        return rest_client.ResponseBody(resp, body)
-
     def update_volume_readonly(self, volume_id, **kwargs):
         """Update the Specified Volume readonly."""
         post_body = json.dumps({'os-update_readonly_flag': kwargs})
diff --git a/tempest/scenario/test_security_groups_basic_ops.py b/tempest/scenario/test_security_groups_basic_ops.py
index 72b61c8..55a3db8 100644
--- a/tempest/scenario/test_security_groups_basic_ops.py
+++ b/tempest/scenario/test_security_groups_basic_ops.py
@@ -625,9 +625,6 @@
     @test.attr(type='slow')
     @test.requires_ext(service='network', extension='port-security')
     @decorators.idempotent_id('13ccf253-e5ad-424b-9c4a-97b88a026699')
-    @testtools.skipUnless(
-        CONF.compute_feature_enabled.allow_port_security_disabled,
-        'Port security must be enabled.')
     # TODO(mriedem): We shouldn't actually need to check this since neutron
     # disables the port_security extension by default, but the problem is nova
     # assumes port_security_enabled=True if it's not set on the network