diff --git a/tempest/api/compute/v3/images/test_image_metadata.py b/tempest/api/compute/v3/images/test_image_metadata.py
deleted file mode 100644
index cd4e5e7..0000000
--- a/tempest/api/compute/v3/images/test_image_metadata.py
+++ /dev/null
@@ -1,111 +0,0 @@
-# Copyright 2012 OpenStack Foundation
-# All Rights Reserved.
-#
-#    Licensed under the Apache License, Version 2.0 (the "License"); you may
-#    not use this file except in compliance with the License. You may obtain
-#    a copy of the License at
-#
-#         http://www.apache.org/licenses/LICENSE-2.0
-#
-#    Unless required by applicable law or agreed to in writing, software
-#    distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
-#    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
-#    License for the specific language governing permissions and limitations
-#    under the License.
-
-from tempest.api.compute import base
-from tempest.common.utils import data_utils
-from tempest import config
-from tempest.test import attr
-
-CONF = config.CONF
-
-
-class ImagesMetadataTest(base.BaseV2ComputeTest):
-    _interface = 'json'
-
-    @classmethod
-    def setUpClass(cls):
-        super(ImagesMetadataTest, cls).setUpClass()
-        if not CONF.service_available.glance:
-            skip_msg = ("%s skipped as glance is not available" % cls.__name__)
-            raise cls.skipException(skip_msg)
-
-        cls.servers_client = cls.servers_client
-        cls.client = cls.images_client
-
-        resp, server = cls.create_test_server(wait_until='ACTIVE')
-        cls.server_id = server['id']
-
-        # Snapshot the server once to save time
-        name = data_utils.rand_name('image')
-        resp, _ = cls.client.create_image(cls.server_id, name, {})
-        cls.image_id = resp['location'].rsplit('/', 1)[1]
-
-        cls.client.wait_for_image_status(cls.image_id, 'ACTIVE')
-
-    @classmethod
-    def tearDownClass(cls):
-        cls.client.delete_image(cls.image_id)
-        super(ImagesMetadataTest, cls).tearDownClass()
-
-    def setUp(self):
-        super(ImagesMetadataTest, self).setUp()
-        meta = {'key1': 'value1', 'key2': 'value2'}
-        resp, _ = self.client.set_image_metadata(self.image_id, meta)
-        self.assertEqual(resp.status, 200)
-
-    @attr(type='gate')
-    def test_list_image_metadata(self):
-        # All metadata key/value pairs for an image should be returned
-        resp, resp_metadata = self.client.list_image_metadata(self.image_id)
-        expected = {'key1': 'value1', 'key2': 'value2'}
-        self.assertEqual(expected, resp_metadata)
-
-    @attr(type='gate')
-    def test_set_image_metadata(self):
-        # The metadata for the image should match the new values
-        req_metadata = {'meta2': 'value2', 'meta3': 'value3'}
-        resp, body = self.client.set_image_metadata(self.image_id,
-                                                    req_metadata)
-
-        resp, resp_metadata = self.client.list_image_metadata(self.image_id)
-        self.assertEqual(req_metadata, resp_metadata)
-
-    @attr(type='gate')
-    def test_update_image_metadata(self):
-        # The metadata for the image should match the updated values
-        req_metadata = {'key1': 'alt1', 'key3': 'value3'}
-        resp, metadata = self.client.update_image_metadata(self.image_id,
-                                                           req_metadata)
-
-        resp, resp_metadata = self.client.list_image_metadata(self.image_id)
-        expected = {'key1': 'alt1', 'key2': 'value2', 'key3': 'value3'}
-        self.assertEqual(expected, resp_metadata)
-
-    @attr(type='gate')
-    def test_get_image_metadata_item(self):
-        # The value for a specific metadata key should be returned
-        resp, meta = self.client.get_image_metadata_item(self.image_id,
-                                                         'key2')
-        self.assertEqual('value2', meta['key2'])
-
-    @attr(type='gate')
-    def test_set_image_metadata_item(self):
-        # The value provided for the given meta item should be set for
-        # the image
-        meta = {'key1': 'alt'}
-        resp, body = self.client.set_image_metadata_item(self.image_id,
-                                                         'key1', meta)
-        resp, resp_metadata = self.client.list_image_metadata(self.image_id)
-        expected = {'key1': 'alt', 'key2': 'value2'}
-        self.assertEqual(expected, resp_metadata)
-
-    @attr(type='gate')
-    def test_delete_image_metadata_item(self):
-        # The metadata value/key pair should be deleted from the image
-        resp, body = self.client.delete_image_metadata_item(self.image_id,
-                                                            'key1')
-        resp, resp_metadata = self.client.list_image_metadata(self.image_id)
-        expected = {'key2': 'value2'}
-        self.assertEqual(expected, resp_metadata)
diff --git a/tempest/api/compute/v3/images/test_image_metadata_negative.py b/tempest/api/compute/v3/images/test_image_metadata_negative.py
deleted file mode 100644
index e76af2c..0000000
--- a/tempest/api/compute/v3/images/test_image_metadata_negative.py
+++ /dev/null
@@ -1,75 +0,0 @@
-# Copyright 2013 OpenStack Foundation
-# All Rights Reserved.
-#
-#    Licensed under the Apache License, Version 2.0 (the "License"); you may
-#    not use this file except in compliance with the License. You may obtain
-#    a copy of the License at
-#
-#         http://www.apache.org/licenses/LICENSE-2.0
-#
-#    Unless required by applicable law or agreed to in writing, software
-#    distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
-#    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
-#    License for the specific language governing permissions and limitations
-#    under the License.
-
-from tempest.api.compute import base
-from tempest.common.utils import data_utils
-from tempest import exceptions
-from tempest.test import attr
-
-
-class ImagesMetadataTest(base.BaseV2ComputeTest):
-    _interface = 'json'
-
-    @classmethod
-    def setUpClass(cls):
-        super(ImagesMetadataTest, cls).setUpClass()
-        cls.client = cls.images_client
-
-    @attr(type=['negative', 'gate'])
-    def test_list_nonexistent_image_metadata(self):
-        # Negative test: List on nonexistent image
-        # metadata should not happen
-        self.assertRaises(exceptions.NotFound, self.client.list_image_metadata,
-                          data_utils.rand_uuid())
-
-    @attr(type=['negative', 'gate'])
-    def test_update_nonexistent_image_metadata(self):
-        # Negative test:An update should not happen for a non-existent image
-        meta = {'key1': 'alt1', 'key2': 'alt2'}
-        self.assertRaises(exceptions.NotFound,
-                          self.client.update_image_metadata,
-                          data_utils.rand_uuid(), meta)
-
-    @attr(type=['negative', 'gate'])
-    def test_get_nonexistent_image_metadata_item(self):
-        # Negative test: Get on non-existent image should not happen
-        self.assertRaises(exceptions.NotFound,
-                          self.client.get_image_metadata_item,
-                          data_utils.rand_uuid(), 'key2')
-
-    @attr(type=['negative', 'gate'])
-    def test_set_nonexistent_image_metadata(self):
-        # Negative test: Metadata should not be set to a non-existent image
-        meta = {'key1': 'alt1', 'key2': 'alt2'}
-        self.assertRaises(exceptions.NotFound, self.client.set_image_metadata,
-                          data_utils.rand_uuid(), meta)
-
-    @attr(type=['negative', 'gate'])
-    def test_set_nonexistent_image_metadata_item(self):
-        # Negative test: Metadata item should not be set to a
-        # nonexistent image
-        meta = {'key1': 'alt'}
-        self.assertRaises(exceptions.NotFound,
-                          self.client.set_image_metadata_item,
-                          data_utils.rand_uuid(), 'key1',
-                          meta)
-
-    @attr(type=['negative', 'gate'])
-    def test_delete_nonexistent_image_metadata_item(self):
-        # Negative test: Shouldn't be able to delete metadata
-        # item from non-existent image
-        self.assertRaises(exceptions.NotFound,
-                          self.client.delete_image_metadata_item,
-                          data_utils.rand_uuid(), 'key1')
diff --git a/tempest/api/compute/v3/images/test_images_oneserver.py b/tempest/api/compute/v3/images/test_images_oneserver.py
index 18772df..cd40948 100644
--- a/tempest/api/compute/v3/images/test_images_oneserver.py
+++ b/tempest/api/compute/v3/images/test_images_oneserver.py
@@ -20,13 +20,13 @@
 from tempest.common.utils import data_utils
 from tempest import config
 from tempest.openstack.common import log as logging
-from tempest.test import attr
+from tempest import test
 
 CONF = config.CONF
 LOG = logging.getLogger(__name__)
 
 
-class ImagesOneServerTest(base.BaseV2ComputeTest):
+class ImagesOneServerV3Test(base.BaseV3ComputeTest):
     _interface = 'json'
 
     def tearDown(self):
@@ -34,12 +34,12 @@
         for image_id in self.image_ids:
             self.client.delete_image(image_id)
             self.image_ids.remove(image_id)
-        super(ImagesOneServerTest, self).tearDown()
+        super(ImagesOneServerV3Test, self).tearDown()
 
     def setUp(self):
         # NOTE(afazekas): Normally we use the same server with all test cases,
         # but if it has an issue, we build a new one
-        super(ImagesOneServerTest, self).setUp()
+        super(ImagesOneServerV3Test, self).setUp()
         # Check if the server is in a clean state after test
         try:
             self.servers_client.wait_for_server_status(self.server_id,
@@ -53,7 +53,7 @@
 
     @classmethod
     def setUpClass(cls):
-        super(ImagesOneServerTest, cls).setUpClass()
+        super(ImagesOneServerV3Test, cls).setUpClass()
         cls.client = cls.images_client
         if not CONF.service_available.glance:
             skip_msg = ("%s skipped as glance is not available" % cls.__name__)
@@ -86,13 +86,14 @@
 
     @testtools.skipUnless(CONF.compute_feature_enabled.create_image,
                           'Environment unable to create images.')
-    @attr(type='smoke')
+    @test.attr(type='smoke')
     def test_create_delete_image(self):
 
         # Create a new image
         name = data_utils.rand_name('image')
         meta = {'image_type': 'test'}
-        resp, body = self.client.create_image(self.server_id, name, meta)
+        resp, body = self.servers_client.create_image(self.server_id,
+                                                      name, meta)
         self.assertEqual(202, resp.status)
         image_id = data_utils.parse_image_id(resp['location'])
         self.client.wait_for_image_status(image_id, 'ACTIVE')
@@ -117,12 +118,13 @@
         self.assertEqual('204', resp['status'])
         self.client.wait_for_resource_deletion(image_id)
 
-    @attr(type=['gate'])
+    @test.attr(type=['gate'])
     def test_create_image_specify_multibyte_character_image_name(self):
         # prefix character is:
         # http://www.fileformat.info/info/unicode/char/1F4A9/index.htm
         utf8_name = data_utils.rand_name(u'\xF0\x9F\x92\xA9')
-        resp, body = self.client.create_image(self.server_id, utf8_name)
+        resp, body = self.servers_client.create_image(self.server_id,
+                                                      utf8_name)
         image_id = data_utils.parse_image_id(resp['location'])
         self.addCleanup(self.client.delete_image, image_id)
         self.assertEqual('202', resp['status'])
diff --git a/tempest/api/compute/v3/images/test_images_oneserver_negative.py b/tempest/api/compute/v3/images/test_images_oneserver_negative.py
index bc276d1..f2f2375 100644
--- a/tempest/api/compute/v3/images/test_images_oneserver_negative.py
+++ b/tempest/api/compute/v3/images/test_images_oneserver_negative.py
@@ -20,15 +20,14 @@
 from tempest import config
 from tempest import exceptions
 from tempest.openstack.common import log as logging
-from tempest.test import attr
-from tempest.test import skip_because
+from tempest import test
 
 CONF = config.CONF
 
 LOG = logging.getLogger(__name__)
 
 
-class ImagesOneServerNegativeTest(base.BaseV2ComputeTest):
+class ImagesOneServerNegativeV3Test(base.BaseV3ComputeTest):
     _interface = 'json'
 
     def tearDown(self):
@@ -36,12 +35,12 @@
         for image_id in self.image_ids:
             self.client.delete_image(image_id)
             self.image_ids.remove(image_id)
-        super(ImagesOneServerNegativeTest, self).tearDown()
+        super(ImagesOneServerNegativeV3Test, self).tearDown()
 
     def setUp(self):
         # NOTE(afazekas): Normally we use the same server with all test cases,
         # but if it has an issue, we build a new one
-        super(ImagesOneServerNegativeTest, self).setUp()
+        super(ImagesOneServerNegativeV3Test, self).setUp()
         # Check if the server is in a clean state after test
         try:
             self.servers_client.wait_for_server_status(self.server_id,
@@ -58,7 +57,7 @@
 
     @classmethod
     def setUpClass(cls):
-        super(ImagesOneServerNegativeTest, cls).setUpClass()
+        super(ImagesOneServerNegativeV3Test, cls).setUpClass()
         cls.client = cls.images_client
         if not CONF.service_available.glance:
             skip_msg = ("%s skipped as glance is not available" % cls.__name__)
@@ -85,41 +84,44 @@
                 cls.alt_manager = clients.AltManager()
             cls.alt_client = cls.alt_manager.images_client
 
-    @skip_because(bug="1006725")
-    @attr(type=['negative', 'gate'])
+    @test.skip_because(bug="1006725")
+    @test.attr(type=['negative', 'gate'])
     def test_create_image_specify_multibyte_character_image_name(self):
         # invalid multibyte sequence from:
         # http://stackoverflow.com/questions/1301402/
         #     example-invalid-utf8-string
         invalid_name = data_utils.rand_name(u'\xc3\x28')
         self.assertRaises(exceptions.BadRequest,
-                          self.client.create_image, self.server_id,
+                          self.servers_client.create_image,
+                          self.server_id,
                           invalid_name)
 
-    @attr(type=['negative', 'gate'])
+    @test.attr(type=['negative', 'gate'])
     def test_create_image_specify_invalid_metadata(self):
         # Return an error when creating image with invalid metadata
         snapshot_name = data_utils.rand_name('test-snap-')
         meta = {'': ''}
-        self.assertRaises(exceptions.BadRequest, self.client.create_image,
+        self.assertRaises(exceptions.BadRequest,
+                          self.servers_client.create_image,
                           self.server_id, snapshot_name, meta)
 
-    @attr(type=['negative', 'gate'])
+    @test.attr(type=['negative', 'gate'])
     def test_create_image_specify_metadata_over_limits(self):
         # Return an error when creating image with meta data over 256 chars
         snapshot_name = data_utils.rand_name('test-snap-')
         meta = {'a' * 260: 'b' * 260}
-        self.assertRaises(exceptions.BadRequest, self.client.create_image,
+        self.assertRaises(exceptions.BadRequest,
+                          self.servers_client.create_image,
                           self.server_id, snapshot_name, meta)
 
-    @attr(type=['negative', 'gate'])
+    @test.attr(type=['negative', 'gate'])
     def test_create_second_image_when_first_image_is_being_saved(self):
         # Disallow creating another image when first image is being saved
 
         # Create first snapshot
         snapshot_name = data_utils.rand_name('test-snap-')
-        resp, body = self.client.create_image(self.server_id,
-                                              snapshot_name)
+        resp, body = self.servers_client.create_image(self.server_id,
+                                                      snapshot_name)
         self.assertEqual(202, resp.status)
         image_id = data_utils.parse_image_id(resp['location'])
         self.image_ids.append(image_id)
@@ -127,23 +129,26 @@
 
         # Create second snapshot
         alt_snapshot_name = data_utils.rand_name('test-snap-')
-        self.assertRaises(exceptions.Conflict, self.client.create_image,
+        self.assertRaises(exceptions.Conflict,
+                          self.servers_client.create_image,
                           self.server_id, alt_snapshot_name)
 
-    @attr(type=['negative', 'gate'])
+    @test.attr(type=['negative', 'gate'])
     def test_create_image_specify_name_over_256_chars(self):
         # Return an error if snapshot name over 256 characters is passed
 
         snapshot_name = data_utils.rand_name('a' * 260)
-        self.assertRaises(exceptions.BadRequest, self.client.create_image,
+        self.assertRaises(exceptions.BadRequest,
+                          self.servers_client.create_image,
                           self.server_id, snapshot_name)
 
-    @attr(type=['negative', 'gate'])
+    @test.attr(type=['negative', 'gate'])
     def test_delete_image_that_is_not_yet_active(self):
         # Return an error while trying to delete an image what is creating
 
         snapshot_name = data_utils.rand_name('test-snap-')
-        resp, body = self.client.create_image(self.server_id, snapshot_name)
+        resp, body = self.servers_client.create_image(self.server_id,
+                                                      snapshot_name)
         self.assertEqual(202, resp.status)
         image_id = data_utils.parse_image_id(resp['location'])
         self.image_ids.append(image_id)
@@ -151,7 +156,7 @@
 
         # Do not wait, attempt to delete the image, ensure it's successful
         resp, body = self.client.delete_image(image_id)
-        self.assertEqual('204', resp['status'])
+        self.assertEqual('200', resp['status'])
         self.image_ids.remove(image_id)
 
         self.assertRaises(exceptions.NotFound, self.client.get_image, image_id)
diff --git a/tempest/api/compute/v3/images/test_list_image_filters.py b/tempest/api/compute/v3/images/test_list_image_filters.py
deleted file mode 100644
index 457ca53..0000000
--- a/tempest/api/compute/v3/images/test_list_image_filters.py
+++ /dev/null
@@ -1,225 +0,0 @@
-# Copyright 2012 OpenStack Foundation
-# All Rights Reserved.
-#
-#    Licensed under the Apache License, Version 2.0 (the "License"); you may
-#    not use this file except in compliance with the License. You may obtain
-#    a copy of the License at
-#
-#         http://www.apache.org/licenses/LICENSE-2.0
-#
-#    Unless required by applicable law or agreed to in writing, software
-#    distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
-#    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
-#    License for the specific language governing permissions and limitations
-#    under the License.
-
-from tempest.api.compute import base
-from tempest import config
-from tempest import exceptions
-from tempest.openstack.common import log as logging
-from tempest.test import attr
-
-CONF = config.CONF
-
-LOG = logging.getLogger(__name__)
-
-
-class ListImageFiltersTest(base.BaseV2ComputeTest):
-    _interface = 'json'
-
-    @classmethod
-    def setUpClass(cls):
-        super(ListImageFiltersTest, cls).setUpClass()
-        if not CONF.service_available.glance:
-            skip_msg = ("%s skipped as glance is not available" % cls.__name__)
-            raise cls.skipException(skip_msg)
-        cls.client = cls.images_client
-        cls.image_ids = []
-
-        try:
-            resp, cls.server1 = cls.create_test_server()
-            resp, cls.server2 = cls.create_test_server(wait_until='ACTIVE')
-            # NOTE(sdague) this is faster than doing the sync wait_util on both
-            cls.servers_client.wait_for_server_status(cls.server1['id'],
-                                                      'ACTIVE')
-
-            # Create images to be used in the filter tests
-            resp, cls.image1 = cls.create_image_from_server(
-                cls.server1['id'], wait_until='ACTIVE')
-            cls.image1_id = cls.image1['id']
-
-            # Servers have a hidden property for when they are being imaged
-            # Performing back-to-back create image calls on a single
-            # server will sometimes cause failures
-            resp, cls.image3 = cls.create_image_from_server(
-                cls.server2['id'], wait_until='ACTIVE')
-            cls.image3_id = cls.image3['id']
-
-            # Wait for the server to be active after the image upload
-            resp, cls.image2 = cls.create_image_from_server(
-                cls.server1['id'], wait_until='ACTIVE')
-            cls.image2_id = cls.image2['id']
-        except Exception:
-            LOG.exception('setUpClass failed')
-            cls.tearDownClass()
-            raise
-
-    @attr(type=['negative', 'gate'])
-    def test_get_image_not_existing(self):
-        # Check raises a NotFound
-        self.assertRaises(exceptions.NotFound, self.client.get_image,
-                          "nonexistingimageid")
-
-    @attr(type='gate')
-    def test_list_images_filter_by_status(self):
-        # The list of images should contain only images with the
-        # provided status
-        params = {'status': 'ACTIVE'}
-        resp, images = self.client.list_images(params)
-
-        self.assertTrue(any([i for i in images if i['id'] == self.image1_id]))
-        self.assertTrue(any([i for i in images if i['id'] == self.image2_id]))
-        self.assertTrue(any([i for i in images if i['id'] == self.image3_id]))
-
-    @attr(type='gate')
-    def test_list_images_filter_by_name(self):
-        # List of all images should contain the expected images filtered
-        # by name
-        params = {'name': self.image1['name']}
-        resp, images = self.client.list_images(params)
-
-        self.assertTrue(any([i for i in images if i['id'] == self.image1_id]))
-        self.assertFalse(any([i for i in images if i['id'] == self.image2_id]))
-        self.assertFalse(any([i for i in images if i['id'] == self.image3_id]))
-
-    @attr(type='gate')
-    def test_list_images_filter_by_server_id(self):
-        # The images should contain images filtered by server id
-        params = {'server': self.server1['id']}
-        resp, images = self.client.list_images(params)
-
-        self.assertTrue(any([i for i in images if i['id'] == self.image1_id]),
-                        "Failed to find image %s in images. Got images %s" %
-                        (self.image1_id, images))
-        self.assertTrue(any([i for i in images if i['id'] == self.image2_id]))
-        self.assertFalse(any([i for i in images if i['id'] == self.image3_id]))
-
-    @attr(type='gate')
-    def test_list_images_filter_by_server_ref(self):
-        # The list of servers should be filtered by server ref
-        server_links = self.server2['links']
-
-        # Try all server link types
-        for link in server_links:
-            params = {'server': link['href']}
-            resp, images = self.client.list_images(params)
-
-            self.assertFalse(any([i for i in images
-                                  if i['id'] == self.image1_id]))
-            self.assertFalse(any([i for i in images
-                                  if i['id'] == self.image2_id]))
-            self.assertTrue(any([i for i in images
-                                 if i['id'] == self.image3_id]))
-
-    @attr(type='gate')
-    def test_list_images_filter_by_type(self):
-        # The list of servers should be filtered by image type
-        params = {'type': 'snapshot'}
-        resp, images = self.client.list_images(params)
-
-        self.assertTrue(any([i for i in images if i['id'] == self.image1_id]))
-        self.assertTrue(any([i for i in images if i['id'] == self.image2_id]))
-        self.assertTrue(any([i for i in images if i['id'] == self.image3_id]))
-        self.assertFalse(any([i for i in images if i['id'] == self.image_ref]))
-
-    @attr(type='gate')
-    def test_list_images_limit_results(self):
-        # Verify only the expected number of results are returned
-        params = {'limit': '1'}
-        resp, images = self.client.list_images(params)
-        self.assertEqual(1, len([x for x in images if 'id' in x]))
-
-    @attr(type='gate')
-    def test_list_images_filter_by_changes_since(self):
-        # Verify only updated images are returned in the detailed list
-
-        # Becoming ACTIVE will modify the updated time
-        # Filter by the image's created time
-        params = {'changes-since': self.image3['created']}
-        resp, images = self.client.list_images(params)
-        found = any([i for i in images if i['id'] == self.image3_id])
-        self.assertTrue(found)
-
-    @attr(type='gate')
-    def test_list_images_with_detail_filter_by_status(self):
-        # Detailed list of all images should only contain images
-        # with the provided status
-        params = {'status': 'ACTIVE'}
-        resp, images = self.client.list_images_with_detail(params)
-
-        self.assertTrue(any([i for i in images if i['id'] == self.image1_id]))
-        self.assertTrue(any([i for i in images if i['id'] == self.image2_id]))
-        self.assertTrue(any([i for i in images if i['id'] == self.image3_id]))
-
-    @attr(type='gate')
-    def test_list_images_with_detail_filter_by_name(self):
-        # Detailed list of all images should contain the expected
-        # images filtered by name
-        params = {'name': self.image1['name']}
-        resp, images = self.client.list_images_with_detail(params)
-
-        self.assertTrue(any([i for i in images if i['id'] == self.image1_id]))
-        self.assertFalse(any([i for i in images if i['id'] == self.image2_id]))
-        self.assertFalse(any([i for i in images if i['id'] == self.image3_id]))
-
-    @attr(type='gate')
-    def test_list_images_with_detail_limit_results(self):
-        # Verify only the expected number of results (with full details)
-        # are returned
-        params = {'limit': '1'}
-        resp, images = self.client.list_images_with_detail(params)
-        self.assertEqual(1, len(images))
-
-    @attr(type='gate')
-    def test_list_images_with_detail_filter_by_server_ref(self):
-        # Detailed list of servers should be filtered by server ref
-        server_links = self.server2['links']
-
-        # Try all server link types
-        for link in server_links:
-            params = {'server': link['href']}
-            resp, images = self.client.list_images_with_detail(params)
-
-            self.assertFalse(any([i for i in images
-                                  if i['id'] == self.image1_id]))
-            self.assertFalse(any([i for i in images
-                                  if i['id'] == self.image2_id]))
-            self.assertTrue(any([i for i in images
-                                 if i['id'] == self.image3_id]))
-
-    @attr(type='gate')
-    def test_list_images_with_detail_filter_by_type(self):
-        # The detailed list of servers should be filtered by image type
-        params = {'type': 'snapshot'}
-        resp, images = self.client.list_images_with_detail(params)
-        resp, image4 = self.client.get_image(self.image_ref)
-
-        self.assertTrue(any([i for i in images if i['id'] == self.image1_id]))
-        self.assertTrue(any([i for i in images if i['id'] == self.image2_id]))
-        self.assertTrue(any([i for i in images if i['id'] == self.image3_id]))
-        self.assertFalse(any([i for i in images if i['id'] == self.image_ref]))
-
-    @attr(type='gate')
-    def test_list_images_with_detail_filter_by_changes_since(self):
-        # Verify an update image is returned
-
-        # Becoming ACTIVE will modify the updated time
-        # Filter by the image's created time
-        params = {'changes-since': self.image1['created']}
-        resp, images = self.client.list_images_with_detail(params)
-        self.assertTrue(any([i for i in images if i['id'] == self.image1_id]))
-
-    @attr(type=['negative', 'gate'])
-    def test_get_nonexistent_image(self):
-        # Negative test: GET on non-existent image should fail
-        self.assertRaises(exceptions.NotFound, self.client.get_image, 999)
diff --git a/tempest/api/image/v1/test_images.py b/tempest/api/image/v1/test_images.py
index d8b79ca..517123d 100644
--- a/tempest/api/image/v1/test_images.py
+++ b/tempest/api/image/v1/test_images.py
@@ -16,8 +16,9 @@
 import cStringIO as StringIO
 
 from tempest.api.image import base
+from tempest.common.utils import data_utils
 from tempest import config
-from tempest.test import attr
+from tempest import test
 
 CONF = config.CONF
 
@@ -25,7 +26,7 @@
 class CreateRegisterImagesTest(base.BaseV1ImageTest):
     """Here we test the registration and creation of images."""
 
-    @attr(type='gate')
+    @test.attr(type='gate')
     def test_register_then_upload(self):
         # Register, then upload an image
         properties = {'prop1': 'val1'}
@@ -48,7 +49,7 @@
         self.assertIn('size', body)
         self.assertEqual(1024, body.get('size'))
 
-    @attr(type='gate')
+    @test.attr(type='gate')
     def test_register_remote_image(self):
         # Register a new remote image
         resp, body = self.create_image(name='New Remote Image',
@@ -66,7 +67,7 @@
         self.assertEqual(properties['key1'], 'value1')
         self.assertEqual(properties['key2'], 'value2')
 
-    @attr(type='gate')
+    @test.attr(type='gate')
     def test_register_http_image(self):
         resp, body = self.create_image(name='New Http Image',
                                        container_format='bare',
@@ -80,7 +81,7 @@
         resp, body = self.client.get_image(image_id)
         self.assertEqual(resp['status'], '200')
 
-    @attr(type='gate')
+    @test.attr(type='gate')
     def test_register_image_with_min_ram(self):
         # Register an image with min ram
         properties = {'prop1': 'val1'}
@@ -110,7 +111,6 @@
     @classmethod
     def setUpClass(cls):
         super(ListImagesTest, cls).setUpClass()
-
         # We add a few images here to test the listing functionality of
         # the images API
         img1 = cls._create_remote_image('one', 'bare', 'raw')
@@ -131,7 +131,7 @@
         # 1x with size 42
         cls.size42_set = set((img5,))
         # 3x with size 142
-        cls.size142_set = set((img6, img7, img8))
+        cls.size142_set = set((img6, img7, img8,))
         # dup named
         cls.dup_set = set((img3, img4))
 
@@ -168,7 +168,7 @@
         image_id = image['id']
         return image_id
 
-    @attr(type='gate')
+    @test.attr(type='gate')
     def test_index_no_params(self):
         # Simple test to see all fixture images returned
         resp, images_list = self.client.image_list()
@@ -177,7 +177,7 @@
         for image_id in self.created_images:
             self.assertIn(image_id, image_list)
 
-    @attr(type='gate')
+    @test.attr(type='gate')
     def test_index_disk_format(self):
         resp, images_list = self.client.image_list(disk_format='ami')
         self.assertEqual(resp['status'], '200')
@@ -187,7 +187,7 @@
         self.assertTrue(self.ami_set <= result_set)
         self.assertFalse(self.created_set - self.ami_set <= result_set)
 
-    @attr(type='gate')
+    @test.attr(type='gate')
     def test_index_container_format(self):
         resp, images_list = self.client.image_list(container_format='bare')
         self.assertEqual(resp['status'], '200')
@@ -197,7 +197,7 @@
         self.assertTrue(self.bare_set <= result_set)
         self.assertFalse(self.created_set - self.bare_set <= result_set)
 
-    @attr(type='gate')
+    @test.attr(type='gate')
     def test_index_max_size(self):
         resp, images_list = self.client.image_list(size_max=42)
         self.assertEqual(resp['status'], '200')
@@ -207,7 +207,7 @@
         self.assertTrue(self.size42_set <= result_set)
         self.assertFalse(self.created_set - self.size42_set <= result_set)
 
-    @attr(type='gate')
+    @test.attr(type='gate')
     def test_index_min_size(self):
         resp, images_list = self.client.image_list(size_min=142)
         self.assertEqual(resp['status'], '200')
@@ -217,7 +217,7 @@
         self.assertTrue(self.size142_set <= result_set)
         self.assertFalse(self.size42_set <= result_set)
 
-    @attr(type='gate')
+    @test.attr(type='gate')
     def test_index_status_active_detail(self):
         resp, images_list = self.client.image_list_detail(status='active',
                                                           sort_key='size',
@@ -230,7 +230,7 @@
             top_size = size
             self.assertEqual(image['status'], 'active')
 
-    @attr(type='gate')
+    @test.attr(type='gate')
     def test_index_name(self):
         resp, images_list = self.client.image_list_detail(
             name='New Remote Image dup')
@@ -240,3 +240,139 @@
             self.assertEqual(image['name'], 'New Remote Image dup')
         self.assertTrue(self.dup_set <= result_set)
         self.assertFalse(self.created_set - self.dup_set <= result_set)
+
+
+class ListSnapshotImagesTest(base.BaseV1ImageTest):
+    @classmethod
+    def setUpClass(cls):
+        super(ListSnapshotImagesTest, cls).setUpClass()
+        if not CONF.compute_feature_enabled.api_v3:
+            cls.servers_client = cls.os.servers_client
+        else:
+            cls.servers_client = cls.os.servers_v3_client
+        cls.servers = []
+        # We add a few images here to test the listing functionality of
+        # the images API
+        cls.snapshot = cls._create_snapshot(
+            'snapshot', CONF.compute.image_ref,
+            CONF.compute.flavor_ref)
+        cls.snapshot_set = set((cls.snapshot,))
+
+        image_file = StringIO.StringIO('*' * 42)
+        resp, image = cls.create_image(name="Standard Image",
+                                       container_format='ami',
+                                       disk_format='ami',
+                                       is_public=True, data=image_file)
+        cls.image_id = image['id']
+        cls.client.wait_for_image_status(image['id'], 'active')
+
+    @classmethod
+    def tearDownClass(cls):
+        for server in cls.servers:
+            cls.servers_client.delete_server(server['id'])
+        super(ListSnapshotImagesTest, cls).tearDownClass()
+
+    @classmethod
+    def _create_snapshot(cls, name, image_id, flavor, **kwargs):
+        resp, server = cls.servers_client.create_server(
+            name, image_id, flavor, **kwargs)
+        cls.servers.append(server)
+        cls.servers_client.wait_for_server_status(
+            server['id'], 'ACTIVE')
+        resp, image = cls.servers_client.create_image(
+            server['id'], name)
+        image_id = data_utils.parse_image_id(resp['location'])
+        cls.created_images.append(image_id)
+        cls.client.wait_for_image_status(image_id,
+                                         'active')
+        return image_id
+
+    @test.attr(type='gate')
+    def test_index_server_id(self):
+        # The images should contain images filtered by server id
+        resp, images = self.client.image_list_detail(
+            {'instance_uuid': self.servers[0]['id']})
+        self.assertEqual(200, resp.status)
+        result_set = set(map(lambda x: x['id'], images))
+        self.assertEqual(self.snapshot_set, result_set)
+
+    @test.attr(type='gate')
+    def test_index_type(self):
+        # The list of servers should be filtered by image type
+        params = {'image_type': 'snapshot'}
+        resp, images = self.client.image_list_detail(params)
+
+        self.assertEqual(200, resp.status)
+        result_set = set(map(lambda x: x['id'], images))
+        self.assertIn(self.snapshot, result_set)
+
+    @test.attr(type='gate')
+    def test_index_limit(self):
+        # Verify only the expected number of results are returned
+        resp, images = self.client.image_list_detail(limit=1)
+
+        self.assertEqual(200, resp.status)
+        self.assertEqual(1, len(images))
+
+    @test.attr(type='gate')
+    def test_index_by_change_since(self):
+        # Verify an update image is returned
+        # Becoming ACTIVE will modify the updated time
+        # Filter by the image's created time
+        resp, image = self.client.get_image_meta(self.snapshot)
+        self.assertEqual(200, resp.status)
+        self.assertEqual(self.snapshot, image['id'])
+        resp, images = self.client.image_list_detail(
+            changes_since=image['updated_at'])
+
+        self.assertEqual(200, resp.status)
+        result_set = set(map(lambda x: x['id'], images))
+        self.assertIn(self.image_id, result_set)
+        self.assertNotIn(self.snapshot, result_set)
+
+
+class UpdateImageMetaTest(base.BaseV1ImageTest):
+    @classmethod
+    def setUpClass(cls):
+        super(UpdateImageMetaTest, cls).setUpClass()
+        cls.image_id = cls._create_standard_image('1', 'ami', 'ami', 42)
+
+    @classmethod
+    def _create_standard_image(cls, name, container_format,
+                               disk_format, size):
+        """
+        Create a new standard image and return the ID of the newly-registered
+        image. Note that the size of the new image is a random number between
+        1024 and 4096
+        """
+        image_file = StringIO.StringIO('*' * size)
+        name = 'New Standard Image %s' % name
+        resp, image = cls.create_image(name=name,
+                                       container_format=container_format,
+                                       disk_format=disk_format,
+                                       is_public=True, data=image_file,
+                                       properties={'key1': 'value1'})
+        image_id = image['id']
+        return image_id
+
+    @test.attr(type='gate')
+    def test_list_image_metadata(self):
+        # All metadata key/value pairs for an image should be returned
+        resp, resp_metadata = self.client.get_image_meta(self.image_id)
+        expected = {'key1': 'value1'}
+        self.assertEqual(expected, resp_metadata['properties'])
+
+    @test.attr(type='gate')
+    def test_update_image_metadata(self):
+        # The metadata for the image should match the updated values
+        req_metadata = {'key1': 'alt1', 'key2': 'value2'}
+        resp, metadata = self.client.get_image_meta(self.image_id)
+        self.assertEqual(200, resp.status)
+        self.assertEqual(metadata['properties'], {'key1': 'value1'})
+        metadata['properties'].update(req_metadata)
+        resp, metadata = self.client.update_image(
+            self.image_id, properties=metadata['properties'])
+
+        resp, resp_metadata = self.client.get_image_meta(self.image_id)
+        expected = {'key1': 'alt1', 'key2': 'value2'}
+        self.assertEqual(expected, resp_metadata['properties'])
diff --git a/tempest/services/image/v1/json/image_client.py b/tempest/services/image/v1/json/image_client.py
index bc9db38..3724ac6 100644
--- a/tempest/services/image/v1/json/image_client.py
+++ b/tempest/services/image/v1/json/image_client.py
@@ -157,7 +157,7 @@
         return resp, body['image']
 
     def update_image(self, image_id, name=None, container_format=None,
-                     data=None):
+                     data=None, properties=None):
         params = {}
         headers = {}
         if name is not None:
@@ -166,6 +166,9 @@
         if container_format is not None:
             params['container_format'] = container_format
 
+        if properties is not None:
+            params['properties'] = properties
+
         headers.update(self._image_meta_to_headers(params))
 
         if data is not None:
@@ -190,7 +193,8 @@
         body = json.loads(body)
         return resp, body['images']
 
-    def image_list_detail(self, properties=dict(), **kwargs):
+    def image_list_detail(self, properties=dict(), changes_since=None,
+                          **kwargs):
         url = 'v1/images/detail'
 
         params = {}
@@ -199,6 +203,9 @@
 
         kwargs.update(params)
 
+        if changes_since is not None:
+            kwargs['changes-since'] = changes_since
+
         if len(kwargs) > 0:
             url += '?%s' % urllib.urlencode(kwargs)