diff --git a/HACKING.rst b/HACKING.rst
index 57f0409..a3e9c26 100644
--- a/HACKING.rst
+++ b/HACKING.rst
@@ -121,38 +121,38 @@
 Test fixtures and resources
 ---------------------------
 Test level resources should be cleaned-up after the test execution. Clean-up
-is best scheduled using `addCleanup` which ensures that the resource cleanup
+is best scheduled using ``addCleanup`` which ensures that the resource cleanup
 code is always invoked, and in reverse order with respect to the creation
 order.
 
-Test class level resources should be defined in the `resource_setup` method of
-the test class, except for any credential obtained from the credentials
-provider, which should be set-up in the `setup_credentials` method.
-Cleanup is best scheduled using `addClassResourceCleanup` which ensures that
+Test class level resources should be defined in the ``resource_setup`` method
+of the test class, except for any credential obtained from the credentials
+provider, which should be set-up in the ``setup_credentials`` method.
+Cleanup is best scheduled using ``addClassResourceCleanup`` which ensures that
 the cleanup code is always invoked, and in reverse order with respect to the
 creation order.
 
 In both cases - test level and class level cleanups - a wait loop should be
 scheduled before the actual delete of resources with an asynchronous delete.
 
-The test base class `BaseTestCase` defines Tempest framework for class level
-fixtures. `setUpClass` and `tearDownClass` are defined here and cannot be
+The test base class ``BaseTestCase`` defines Tempest framework for class level
+fixtures. ``setUpClass`` and ``tearDownClass`` are defined here and cannot be
 overwritten by subclasses (enforced via hacking rule T105).
 
 Set-up is split in a series of steps (setup stages), which can be overwritten
 by test classes. Set-up stages are:
 
-- `skip_checks`
-- `setup_credentials`
-- `setup_clients`
-- `resource_setup`
+- ``skip_checks``
+- ``setup_credentials``
+- ``setup_clients``
+- ``resource_setup``
 
 Tear-down is also split in a series of steps (teardown stages), which are
 stacked for execution only if the corresponding setup stage had been
 reached during the setup phase. Tear-down stages are:
 
-- `clear_credentials` (defined in the base test class)
-- `resource_cleanup`
+- ``clear_credentials`` (defined in the base test class)
+- ``resource_cleanup``
 
 Skipping Tests
 --------------
diff --git a/README.rst b/README.rst
index c087f29..242f4d5 100644
--- a/README.rst
+++ b/README.rst
@@ -193,6 +193,25 @@
 Alternatively, there are the py27 and py35 tox jobs which will run the unit
 tests with the corresponding version of python.
 
+One common activity is to just run a single test, you can do this with tox
+simply by specifying to just run py27 or py35 tests against a single test::
+
+    $ tox -e py27 -- -n tempest.tests.test_microversions.TestMicroversionsTestsClass.test_config_version_none_23
+
+Or all tests in the test_microversions.py file::
+
+    $ tox -e py27 -- -n tempest.tests.test_microversions
+
+You may also use regular expressions to run any matching tests::
+
+    $ tox -e py27 -- test_microversions
+
+Additionally, when running a single test, or test-file, the ``-n/--no-discover``
+argument is no longer required, however it may perform faster if included.
+
+For more information on these options and details about stestr, please see the
+`stestr documentation <http://stestr.readthedocs.io/en/latest/MANUAL.html>`_.
+
 Python 2.6
 ----------
 
diff --git a/doc/source/test_removal.rst b/doc/source/test_removal.rst
index b57e98f..ddae6e2 100644
--- a/doc/source/test_removal.rst
+++ b/doc/source/test_removal.rst
@@ -62,9 +62,9 @@
 The Old Way using subunit2sql directly
 """"""""""""""""""""""""""""""""""""""
 
-SELECT * from tests where test_id like "%test_id%";
-(where $test_id is the full test_id, but truncated to the class because of
-setUpClass or tearDownClass failures)
+``SELECT * from tests where test_id like "%test_id%";``
+(where ``$test_id`` is the full test_id, but truncated to the class because of
+``setUpClass`` or ``tearDownClass`` failures)
 
 You can access the infra mysql subunit2sql db w/ read-only permissions with:
 
@@ -74,15 +74,20 @@
 * db_name: subunit2sql
 
 For example if you were trying to remove the test with the id:
-tempest.api.compute.admin.test_flavors_negative.FlavorsAdminNegativeTestJSON.test_get_flavor_details_for_deleted_flavor
+``tempest.api.compute.admin.test_flavors_negative.FlavorsAdminNegativeTestJSON.test_get_flavor_details_for_deleted_flavor``
 you would run the following:
 
-#. run: "mysql -u query -p -h logstash.openstack.org subunit2sql" to connect
-   to the subunit2sql db
-#. run the query: MySQL [subunit2sql]> select * from tests where test_id like
-   "tempest.api.compute.admin.test_flavors_negative.FlavorsAdminNegativeTestJSON%";
+#. run the command: ``mysql -u query -p -h logstash.openstack.org subunit2sql``
+   to connect to the subunit2sql db
+#. run the query:
+
+   .. code-block:: console
+
+       MySQL [subunit2sql]> select * from tests where test_id like \
+       "tempest.api.compute.admin.test_flavors_negative.FlavorsAdminNegativeTestJSON%";
+
    which will return a table of all the tests in the class (but it will also
-   catch failures in setUpClass and tearDownClass)
+   catch failures in ``setUpClass`` and ``tearDownClass``)
 #. paste the output table with numbers and the mysql command you ran to
    generate it into the etherpad.
 
diff --git a/releasenotes/notes/remove-deprecated-skip_unless_attr-decorator-02bde59a00328f5c.yaml b/releasenotes/notes/remove-deprecated-skip_unless_attr-decorator-02bde59a00328f5c.yaml
new file mode 100644
index 0000000..621731d
--- /dev/null
+++ b/releasenotes/notes/remove-deprecated-skip_unless_attr-decorator-02bde59a00328f5c.yaml
@@ -0,0 +1,4 @@
+---
+upgrade:
+  - |
+    Remove the deprecated decorator ``skip_unless_attr`` in lib/decorators.py.
diff --git a/requirements.txt b/requirements.txt
index 023148b..2300214 100644
--- a/requirements.txt
+++ b/requirements.txt
@@ -9,7 +9,7 @@
 netaddr>=0.7.18 # BSD
 testrepository>=0.0.18 # Apache-2.0/BSD
 oslo.concurrency>=3.20.0 # Apache-2.0
-oslo.config>=4.6.0 # Apache-2.0
+oslo.config>=5.1.0 # Apache-2.0
 oslo.log>=3.30.0 # Apache-2.0
 oslo.serialization!=2.19.1,>=2.18.0 # Apache-2.0
 oslo.utils>=3.31.0 # Apache-2.0
diff --git a/tempest/README.rst b/tempest/README.rst
index 663653e..62821de 100644
--- a/tempest/README.rst
+++ b/tempest/README.rst
@@ -12,10 +12,12 @@
 and guidelines. Below is the overview of the Tempest respository structure
 to make this clear.
 
-| tempest/
-|    api/ - API tests
-|    scenario/ - complex scenario tests
-|    tests/ - unit tests for Tempest internals
+ .. code-block:: console
+
+    tempest/
+       api/ - API tests
+       scenario/ - complex scenario tests
+       tests/ - unit tests for Tempest internals
 
 Each of these directories contains different types of tests. What
 belongs in each directory, the rules and examples for good tests, are
diff --git a/tempest/api/compute/base.py b/tempest/api/compute/base.py
index 705814c..ac03cdc 100644
--- a/tempest/api/compute/base.py
+++ b/tempest/api/compute/base.py
@@ -434,12 +434,12 @@
             # the compute API will return a 400 response.
             if volume['status'] == 'in-use':
                 self.servers_client.detach_volume(server['id'], volume['id'])
-        except exceptions.NotFound:
+        except lib_exc.NotFound:
             # Ignore 404s on detach in case the server is deleted or the volume
             # is already detached.
             pass
 
-    def attach_volume(self, server, volume, device=None, check_reserved=False):
+    def attach_volume(self, server, volume, device=None):
         """Attaches volume to server and waits for 'in-use' volume status.
 
         The volume will be detached when the test tears down.
@@ -448,15 +448,10 @@
         :param volume: The volume to attach.
         :param device: Optional mountpoint for the attached volume. Note that
             this is not guaranteed for all hypervisors and is not recommended.
-        :param check_reserved: Consider a status of reserved as valid for
-            completion. This is to handle new Cinder attach where we more
-            accurately use 'reserved' for things like attaching to a shelved
-            server.
         """
         attach_kwargs = dict(volumeId=volume['id'])
         if device:
             attach_kwargs['device'] = device
-
         attachment = self.servers_client.attach_volume(
             server['id'], **attach_kwargs)['volumeAttachment']
         # On teardown detach the volume and wait for it to be available. This
@@ -467,11 +462,8 @@
         # Ignore 404s on detach in case the server is deleted or the volume
         # is already detached.
         self.addCleanup(self._detach_volume, server, volume)
-        statuses = ['in-use']
-        if check_reserved:
-            statuses.append('reserved')
         waiters.wait_for_volume_resource_status(self.volumes_client,
-                                                volume['id'], statuses)
+                                                volume['id'], 'in-use')
         return attachment
 
 
diff --git a/tempest/api/compute/servers/test_attach_interfaces.py b/tempest/api/compute/servers/test_attach_interfaces.py
index 0248c65..0e8f681 100644
--- a/tempest/api/compute/servers/test_attach_interfaces.py
+++ b/tempest/api/compute/servers/test_attach_interfaces.py
@@ -78,8 +78,11 @@
 
         return port
 
-    def _check_interface(self, iface, port_id=None, network_id=None,
-                         fixed_ip=None, mac_addr=None):
+    def _check_interface(self, iface, server_id=None, port_id=None,
+                         network_id=None, fixed_ip=None, mac_addr=None):
+        if server_id:
+            iface = waiters.wait_for_interface_status(
+                self.interfaces_client, server_id, iface['port_id'], 'ACTIVE')
         if port_id:
             self.assertEqual(iface['port_id'], port_id)
         if network_id:
@@ -109,9 +112,8 @@
         network_id = ifs[0]['net_id']
         iface = self.interfaces_client.create_interface(
             server['id'], net_id=network_id)['interfaceAttachment']
-        iface = waiters.wait_for_interface_status(
-            self.interfaces_client, server['id'], iface['port_id'], 'ACTIVE')
-        self._check_interface(iface, network_id=network_id)
+        self._check_interface(iface, server_id=server['id'],
+                              network_id=network_id)
         return iface
 
     def _test_create_interface_by_port_id(self, server, ifs):
@@ -121,9 +123,8 @@
         self.addCleanup(self.ports_client.delete_port, port_id)
         iface = self.interfaces_client.create_interface(
             server['id'], port_id=port_id)['interfaceAttachment']
-        iface = waiters.wait_for_interface_status(
-            self.interfaces_client, server['id'], iface['port_id'], 'ACTIVE')
-        self._check_interface(iface, port_id=port_id)
+        self._check_interface(iface, server_id=server['id'], port_id=port_id,
+                              network_id=network_id)
         return iface
 
     def _test_create_interface_by_fixed_ips(self, server, ifs):
@@ -140,9 +141,8 @@
             server['id'], net_id=network_id,
             fixed_ips=fixed_ips)['interfaceAttachment']
         self.addCleanup(self.ports_client.delete_port, iface['port_id'])
-        iface = waiters.wait_for_interface_status(
-            self.interfaces_client, server['id'], iface['port_id'], 'ACTIVE')
-        self._check_interface(iface, fixed_ip=ip_list[0])
+        self._check_interface(iface, server_id=server['id'],
+                              fixed_ip=ip_list[0])
         return iface
 
     def _test_show_interface(self, server, ifs):
@@ -271,7 +271,8 @@
             # attach the port to the server
             iface = self.interfaces_client.create_interface(
                 server['id'], port_id=port_id)['interfaceAttachment']
-            self._check_interface(iface, port_id=port_id)
+            self._check_interface(iface, server_id=server['id'],
+                                  port_id=port_id)
 
             # detach the port from the server; this is a cast in the compute
             # API so we have to poll the port until the device_id is unset.
diff --git a/tempest/api/compute/servers/test_server_actions.py b/tempest/api/compute/servers/test_server_actions.py
index bce7524..e2be249 100644
--- a/tempest/api/compute/servers/test_server_actions.py
+++ b/tempest/api/compute/servers/test_server_actions.py
@@ -326,10 +326,22 @@
         server = self.create_test_server(
             volume_backed=True, wait_until='ACTIVE')
         self._test_resize_server_confirm(server['id'])
-        # Now do something interactive with the guest like get its console
-        # output; we don't actually care about the output, just that it doesn't
-        # raise an error.
-        self.client.get_console_output(server['id'])
+        if CONF.compute_feature_enabled.console_output:
+            # Now do something interactive with the guest like get its console
+            # output; we don't actually care about the output,
+            # just that it doesn't raise an error.
+            self.client.get_console_output(server['id'])
+        if CONF.validation.run_validation:
+            validation_resources = self.get_class_validation_resources(
+                self.os_primary)
+            linux_client = remote_client.RemoteClient(
+                self.get_server_ip(server, validation_resources),
+                self.ssh_user,
+                password=None,
+                pkey=validation_resources['keypair']['private_key'],
+                server=server,
+                servers_client=self.client)
+            linux_client.validate_authentication()
 
     @decorators.idempotent_id('138b131d-66df-48c9-a171-64f45eb92962')
     @testtools.skipUnless(CONF.compute_feature_enabled.resize,
diff --git a/tempest/api/compute/volumes/test_attach_volume.py b/tempest/api/compute/volumes/test_attach_volume.py
index 9bef80f..297e8a8 100644
--- a/tempest/api/compute/volumes/test_attach_volume.py
+++ b/tempest/api/compute/volumes/test_attach_volume.py
@@ -223,8 +223,7 @@
         num_vol = self._count_volumes(server, validation_resources)
         self._shelve_server(server, validation_resources)
         attachment = self.attach_volume(server, volume,
-                                        device=('/dev/%s' % self.device),
-                                        check_reserved=True)
+                                        device=('/dev/%s' % self.device))
 
         # Unshelve the instance and check that attached volume exists
         self._unshelve_server_and_check_volumes(
@@ -250,8 +249,7 @@
         self._shelve_server(server, validation_resources)
 
         # Attach and then detach the volume
-        self.attach_volume(server, volume, device=('/dev/%s' % self.device),
-                           check_reserved=True)
+        self.attach_volume(server, volume, device=('/dev/%s' % self.device))
         self.servers_client.detach_volume(server['id'], volume['id'])
         waiters.wait_for_volume_resource_status(self.volumes_client,
                                                 volume['id'], 'available')
diff --git a/tempest/api/identity/admin/v3/test_endpoints_negative.py b/tempest/api/identity/admin/v3/test_endpoints_negative.py
index 70dd7b5..d54e222 100644
--- a/tempest/api/identity/admin/v3/test_endpoints_negative.py
+++ b/tempest/api/identity/admin/v3/test_endpoints_negative.py
@@ -30,7 +30,6 @@
     @classmethod
     def resource_setup(cls):
         super(EndpointsNegativeTestJSON, cls).resource_setup()
-        cls.service_ids = list()
         s_name = data_utils.rand_name('service')
         s_type = data_utils.rand_name('type')
         s_description = data_utils.rand_name('description')
@@ -38,14 +37,10 @@
             cls.services_client.create_service(name=s_name, type=s_type,
                                                description=s_description)
             ['service'])
-        cls.service_id = service_data['id']
-        cls.service_ids.append(cls.service_id)
+        cls.addClassResourceCleanup(cls.services_client.delete_service,
+                                    service_data['id'])
 
-    @classmethod
-    def resource_cleanup(cls):
-        for s in cls.service_ids:
-            cls.services_client.delete_service(s)
-        super(EndpointsNegativeTestJSON, cls).resource_cleanup()
+        cls.service_id = service_data['id']
 
     @decorators.attr(type=['negative'])
     @decorators.idempotent_id('ac6c137e-4d3d-448f-8c83-4f13d0942651')
diff --git a/tempest/api/identity/admin/v3/test_list_projects.py b/tempest/api/identity/admin/v3/test_list_projects.py
index 25dd52b..82664e8 100644
--- a/tempest/api/identity/admin/v3/test_list_projects.py
+++ b/tempest/api/identity/admin/v3/test_list_projects.py
@@ -27,32 +27,27 @@
         # Create a domain
         cls.domain = cls.create_domain()
         # Create project with domain
-        cls.projects = list()
         cls.p1_name = data_utils.rand_name('project')
         cls.p1 = cls.projects_client.create_project(
             cls.p1_name, enabled=False,
             domain_id=cls.domain['id'])['project']
-        cls.projects.append(cls.p1)
+        cls.addClassResourceCleanup(cls.projects_client.delete_project,
+                                    cls.p1['id'])
         cls.project_ids.append(cls.p1['id'])
         # Create default project
         p2_name = data_utils.rand_name('project')
         cls.p2 = cls.projects_client.create_project(p2_name)['project']
-        cls.projects.append(cls.p2)
+        cls.addClassResourceCleanup(cls.projects_client.delete_project,
+                                    cls.p2['id'])
         cls.project_ids.append(cls.p2['id'])
         # Create a new project (p3) using p2 as parent project
         p3_name = data_utils.rand_name('project')
         cls.p3 = cls.projects_client.create_project(
             p3_name, parent_id=cls.p2['id'])['project']
-        cls.projects.append(cls.p3)
+        cls.addClassResourceCleanup(cls.projects_client.delete_project,
+                                    cls.p3['id'])
         cls.project_ids.append(cls.p3['id'])
 
-    @classmethod
-    def resource_cleanup(cls):
-        # Cleanup the projects created during setup in inverse order
-        for project in reversed(cls.projects):
-            cls.projects_client.delete_project(project['id'])
-        super(ListProjectsTestJSON, cls).resource_cleanup()
-
     @decorators.idempotent_id('1d830662-22ad-427c-8c3e-4ec854b0af44')
     def test_list_projects(self):
         # List projects
diff --git a/tempest/api/identity/admin/v3/test_roles.py b/tempest/api/identity/admin/v3/test_roles.py
index e7b005c..7cd41e9 100644
--- a/tempest/api/identity/admin/v3/test_roles.py
+++ b/tempest/api/identity/admin/v3/test_roles.py
@@ -32,6 +32,8 @@
         for _ in range(3):
             role_name = data_utils.rand_name(name='role')
             role = cls.roles_client.create_role(name=role_name)['role']
+            cls.addClassResourceCleanup(cls.roles_client.delete_role,
+                                        role['id'])
             cls.roles.append(role)
         u_name = data_utils.rand_name('user')
         u_desc = '%s description' % u_name
@@ -42,25 +44,23 @@
             data_utils.rand_name('project'),
             description=data_utils.rand_name('project-desc'),
             domain_id=cls.domain['id'])['project']
+        cls.addClassResourceCleanup(cls.projects_client.delete_project,
+                                    cls.project['id'])
         cls.group_body = cls.groups_client.create_group(
             name=data_utils.rand_name('Group'), project_id=cls.project['id'],
             domain_id=cls.domain['id'])['group']
+        cls.addClassResourceCleanup(cls.groups_client.delete_group,
+                                    cls.group_body['id'])
         cls.user_body = cls.users_client.create_user(
             name=u_name, description=u_desc, password=cls.u_password,
             email=u_email, project_id=cls.project['id'],
             domain_id=cls.domain['id'])['user']
+        cls.addClassResourceCleanup(cls.users_client.delete_user,
+                                    cls.user_body['id'])
         cls.role = cls.roles_client.create_role(
             name=data_utils.rand_name('Role'))['role']
-
-    @classmethod
-    def resource_cleanup(cls):
-        cls.roles_client.delete_role(cls.role['id'])
-        cls.groups_client.delete_group(cls.group_body['id'])
-        cls.users_client.delete_user(cls.user_body['id'])
-        cls.projects_client.delete_project(cls.project['id'])
-        for role in cls.roles:
-            cls.roles_client.delete_role(role['id'])
-        super(RolesV3TestJSON, cls).resource_cleanup()
+        cls.addClassResourceCleanup(cls.roles_client.delete_role,
+                                    cls.role['id'])
 
     @decorators.attr(type='smoke')
     @decorators.idempotent_id('18afc6c0-46cf-4911-824e-9989cc056c3a')
diff --git a/tempest/api/network/base.py b/tempest/api/network/base.py
index c2a67e3..bdfda0a 100644
--- a/tempest/api/network/base.py
+++ b/tempest/api/network/base.py
@@ -92,7 +92,6 @@
         cls.subnets = []
         cls.ports = []
         cls.routers = []
-        cls.floating_ips = []
         cls.ethertype = "IPv" + str(cls._ip_version)
         if cls._ip_version == 4:
             cls.cidr = netaddr.IPNetwork(CONF.network.project_network_cidr)
@@ -104,11 +103,6 @@
     @classmethod
     def resource_cleanup(cls):
         if CONF.service_available.neutron:
-            # Clean up floating IPs
-            for floating_ip in cls.floating_ips:
-                test_utils.call_and_ignore_notfound_exc(
-                    cls.floating_ips_client.delete_floatingip,
-                    floating_ip['id'])
             # Clean up ports
             for port in cls.ports:
                 test_utils.call_and_ignore_notfound_exc(
@@ -222,7 +216,9 @@
         body = cls.floating_ips_client.create_floatingip(
             floating_network_id=external_network_id)
         fip = body['floatingip']
-        cls.floating_ips.append(fip)
+        cls.addClassResourceCleanup(test_utils.call_and_ignore_notfound_exc,
+                                    cls.floating_ips_client.delete_floatingip,
+                                    fip['id'])
         return fip
 
     @classmethod
diff --git a/tempest/api/volume/test_volumes_extend.py b/tempest/api/volume/test_volumes_extend.py
index de28a30..b73bdf2 100644
--- a/tempest/api/volume/test_volumes_extend.py
+++ b/tempest/api/volume/test_volumes_extend.py
@@ -18,6 +18,7 @@
 import testtools
 
 from tempest.api.volume import base
+from tempest.common import utils
 from tempest.common import waiters
 from tempest import config
 from tempest.lib import decorators
@@ -104,6 +105,7 @@
     @decorators.idempotent_id('301f5a30-1c6f-4ea0-be1a-91fd28d44354')
     @testtools.skipUnless(CONF.volume_feature_enabled.extend_attached_volume,
                           "Attached volume extend is disabled.")
+    @utils.services('compute')
     def test_extend_attached_volume(self):
         """This is a happy path test which does the following:
 
diff --git a/tempest/cmd/account_generator.py b/tempest/cmd/account_generator.py
index c2f8627..92eae02 100755
--- a/tempest/cmd/account_generator.py
+++ b/tempest/cmd/account_generator.py
@@ -15,18 +15,18 @@
 #    under the License.
 
 """
-Utility for creating **accounts.yaml** file for concurrent test runs.
+Utility for creating ``accounts.yaml`` file for concurrent test runs.
 Creates one primary user, one alt user, one swift admin, one stack owner
 and one admin (optionally) for each concurrent thread. The utility creates
-user for each tenant. The **accounts.yaml** file will be valid and contain
+user for each tenant. The ``accounts.yaml`` file will be valid and contain
 credentials for created users, so each user will be in separate tenant and
 have the username, tenant_name, password and roles.
 
-**Usage:** ``tempest account-generator [-h] [OPTIONS] accounts_file.yaml``.
+**Usage:** ``tempest account-generator [-h] [OPTIONS] accounts_file.yaml``
 
 Positional Arguments
 --------------------
-**accounts_file.yaml** (Required) Provide an output accounts yaml file. Utility
+``accounts_file.yaml`` (Required) Provide an output accounts yaml file. Utility
 creates a .yaml file in the directory where the command is ran. The appropriate
 name for the file is *accounts.yaml* and it should be placed in *tempest/etc*
 directory.
@@ -40,62 +40,62 @@
 
 You're probably familiar with these, but just to remind:
 
-======== ======================== ====================
-Param    CLI                      Environment Variable
-======== ======================== ====================
-Username --os-username            OS_USERNAME
-Password --os-password            OS_PASSWORD
-Project  --os-project-name        OS_PROJECT_NAME
-Tenant   --os-tenant-name (depr.) OS_TENANT_NAME
-Domain   --os-domain-name         OS_DOMAIN_NAME
-======== ======================== ====================
+======== ============================ ====================
+Param    CLI                          Environment Variable
+======== ============================ ====================
+Username ``--os-username``            OS_USERNAME
+Password ``--os-password``            OS_PASSWORD
+Project  ``--os-project-name``        OS_PROJECT_NAME
+Tenant   ``--os-tenant-name`` (depr.) OS_TENANT_NAME
+Domain   ``--os-domain-name``         OS_DOMAIN_NAME
+======== ============================ ====================
 
 Optional Arguments
 ------------------
-**-h**, **--help** (Optional) Shows help message with the description of
-utility and its arguments, and exits.
+* ``-h, --help`` (Optional) Shows help message with the description of
+  utility and its arguments, and exits.
 
-**-c /etc/tempest.conf**, **--config-file /etc/tempest.conf** (Optional) Path
-to tempest config file. If not specified, it searches for tempest.conf in these
-locations:
+* ``-c, --config-file /etc/tempest.conf`` (Optional) Path
+  to tempest config file. If not specified, it searches for tempest.conf in
+  these locations:
 
-- ./etc/
-- /etc/tempest
-- ~/.tempest/
-- ~/
-- /etc/
+  - ./etc/
+  - /etc/tempest
+  - ~/.tempest/
+  - ~/
+  - /etc/
 
-**--os-username <auth-user-name>** (Optional) Name used for authentication with
-the OpenStack Identity service. Defaults to env[OS_USERNAME]. Note: User should
-have permissions to create new user accounts and tenants.
+* ``--os-username <auth-user-name>`` (Optional) Name used for authentication
+  with the OpenStack Identity service. Defaults to env[OS_USERNAME]. Note: User
+  should have permissions to create new user accounts and tenants.
 
-**--os-password <auth-password>** (Optional) Password used for authentication
-with the OpenStack Identity service. Defaults to env[OS_PASSWORD].
+* ``--os-password <auth-password>`` (Optional) Password used for authentication
+  with the OpenStack Identity service. Defaults to env[OS_PASSWORD].
 
-**--os-project-name <auth-project-name>** (Optional) Project to request
-authorization on. Defaults to env[OS_PROJECT_NAME].
+* ``--os-project-name <auth-project-name>`` (Optional) Project to request
+  authorization on. Defaults to env[OS_PROJECT_NAME].
 
-**--os-tenant-name <auth-tenant-name>** (Optional, deprecated) Tenant to
-request authorization on. Defaults to env[OS_TENANT_NAME].
+* ``--os-tenant-name <auth-tenant-name>`` (Optional, deprecated) Tenant to
+  request authorization on. Defaults to env[OS_TENANT_NAME].
 
-**--os-domain-name <auth-domain-name>** (Optional) Domain the user and project
-belong to. Defaults to env[OS_DOMAIN_NAME].
+* ``--os-domain-name <auth-domain-name>`` (Optional) Domain the user and
+  project belong to. Defaults to env[OS_DOMAIN_NAME].
 
-**--tag TAG** (Optional) Resources tag. Each created resource (user, project)
-will have the prefix with the given TAG in its name. Using tag is recommended
-for the further using, cleaning resources.
+* ``--tag TAG`` (Optional) Resources tag. Each created resource (user, project)
+  will have the prefix with the given TAG in its name. Using tag is recommended
+  for the further using, cleaning resources.
 
-**-r CONCURRENCY**, **--concurrency CONCURRENCY** (Optional) Concurrency count
-(default: 1). The number of accounts required can be estimated as
-CONCURRENCY x 2. Each user provided in *accounts.yaml* file will be in
-a different tenant. This is required to provide isolation between test for
-running in parallel.
+* ``-r, --concurrency CONCURRENCY`` (Optional) Concurrency count
+  (default: 1). The number of accounts required can be estimated as
+  CONCURRENCY x 2. Each user provided in *accounts.yaml* file will be in
+  a different tenant. This is required to provide isolation between test for
+  running in parallel.
 
-**--with-admin** (Optional) Creates admin for each concurrent group
-(default: False).
+* ``--with-admin`` (Optional) Creates admin for each concurrent group
+  (default: False).
 
-**-i VERSION**, **--identity-version VERSION** (Optional) Provisions accounts
-using the specified version of the identity API. (default: '3').
+* ``-i, --identity-version VERSION`` (Optional) Provisions accounts
+  using the specified version of the identity API. (default: '3').
 
 To see help on specific argument, please do: ``tempest account-generator
 [OPTIONS] <accounts_file.yaml> -h``.
diff --git a/tempest/cmd/cleanup.py b/tempest/cmd/cleanup.py
index d0aa7dc..29abd49 100644
--- a/tempest/cmd/cleanup.py
+++ b/tempest/cmd/cleanup.py
@@ -28,45 +28,48 @@
 Example Run
 -----------
 
-**WARNING: If step 1 is skipped in the example below, the cleanup procedure
-may delete resources that existed in the cloud before the test run. This
-may cause an unwanted destruction of cloud resources, so use caution with
-this command.**
+.. warning::
 
-``$ tempest cleanup --init-saved-state``
+    If step 1 is skipped in the example below, the cleanup procedure
+    may delete resources that existed in the cloud before the test run. This
+    may cause an unwanted destruction of cloud resources, so use caution with
+    this command.
 
-``$ # Actual running of Tempest tests``
+    Examples::
 
-``$ tempest cleanup``
+     $ tempest cleanup --init-saved-state
+     $ # Actual running of Tempest tests
+     $ tempest cleanup
 
 Runtime Arguments
 -----------------
 
-**--init-saved-state**: Initializes the saved state of the OpenStack deployment
-and will output a ``saved_state.json`` file containing resources from your
-deployment that will be preserved from the cleanup command. This should be
-done prior to running Tempest tests.
+* ``--init-saved-state``: Initializes the saved state of the OpenStack
+  deployment and will output a ``saved_state.json`` file containing resources
+  from your deployment that will be preserved from the cleanup command. This
+  should be done prior to running Tempest tests.
 
-**--delete-tempest-conf-objects**: If option is present, then the command will
-delete the admin project in addition to the resources associated with them on
-clean up. If option is not present, the command will delete the resources
-associated with the Tempest and alternate Tempest users and projects but will
-not delete the projects themselves.
+* ``--delete-tempest-conf-objects``: If option is present, then the command
+  will delete the admin project in addition to the resources associated with
+  them on clean up. If option is not present, the command will delete the
+  resources associated with the Tempest and alternate Tempest users and
+  projects but will not delete the projects themselves.
 
-**--dry-run**: Creates a report (``./dry_run.json``) of the projects that will
-be cleaned up (in the ``_projects_to_clean`` dictionary [1]_) and the global
-objects that will be removed (domains, flavors, images, roles, projects,
-and users). Once the cleanup command is executed (e.g. run without
-parameters), running it again with **--dry-run** should yield an empty report.
+* ``--dry-run``: Creates a report (``./dry_run.json``) of the projects that
+  will be cleaned up (in the ``_projects_to_clean`` dictionary [1]_) and the
+  global objects that will be removed (domains, flavors, images, roles,
+  projects, and users). Once the cleanup command is executed (e.g. run without
+  parameters), running it again with ``--dry-run`` should yield an empty
+  report.
 
-**--help**: Print the help text for the command and parameters.
+* ``--help``: Print the help text for the command and parameters.
 
 .. [1] The ``_projects_to_clean`` dictionary in ``dry_run.json`` lists the
     projects that ``tempest cleanup`` will loop through to delete child
     objects, but the command will, by default, not delete the projects
     themselves. This may differ from the ``projects`` list as you can clean
     the Tempest and alternate Tempest users and projects but they will not be
-    deleted unless the **--delete-tempest-conf-objects** flag is used to
+    deleted unless the ``--delete-tempest-conf-objects`` flag is used to
     force their deletion.
 
 """
diff --git a/tempest/cmd/run.py b/tempest/cmd/run.py
index f07f197..0d847bd 100644
--- a/tempest/cmd/run.py
+++ b/tempest/cmd/run.py
@@ -19,11 +19,11 @@
 ==============
 Tempest run has several options:
 
- * **--regex/-r**: This is a selection regex like what testr uses. It will run
-                   any tests that match on re.match() with the regex
- * **--smoke/-s**: Run all the tests tagged as smoke
+* ``--regex, -r``: This is a selection regex like what testr uses. It will run
+  any tests that match on re.match() with the regex
+* ``--smoke, -s``: Run all the tests tagged as smoke
 
-There are also the **--blacklist-file** and **--whitelist-file** options that
+There are also the ``--blacklist-file`` and ``--whitelist-file`` options that
 let you pass a filepath to tempest run with the file format being a line
 separated regex, with '#' used to signify the start of a comment on a line.
 For example::
@@ -44,21 +44,21 @@
 When combined with a whitelist file all the regexes from the file and the CLI
 regexes will be ORed.
 
-You can also use the **--list-tests** option in conjunction with selection
+You can also use the ``--list-tests`` option in conjunction with selection
 arguments to list which tests will be run.
 
-You can also use the **--load-list** option that lets you pass a filepath to
+You can also use the ``--load-list`` option that lets you pass a filepath to
 tempest run with the file format being in a non-regex format, similar to the
-tests generated by the **--list-tests** option. You can specify target tests
+tests generated by the ``--list-tests`` option. You can specify target tests
 by removing unnecessary tests from a list file which is generated from
-**--list-tests** option.
+``--list-tests`` option.
 
 Test Execution
 ==============
 There are several options to control how the tests are executed. By default
 tempest will run in parallel with a worker for each CPU present on the machine.
-If you want to adjust the number of workers use the **--concurrency** option
-and if you want to run tests serially use **--serial/-t**
+If you want to adjust the number of workers use the ``--concurrency`` option
+and if you want to run tests serially use ``--serial/-t``
 
 Running with Workspaces
 -----------------------
@@ -82,7 +82,7 @@
 ===========
 By default tempest run's output to STDOUT will be generated using the
 subunit-trace output filter. But, if you would prefer a subunit v2 stream be
-output to STDOUT use the **--subunit** flag
+output to STDOUT use the ``--subunit`` flag
 
 Combining Runs
 ==============
@@ -90,7 +90,7 @@
 There are certain situations in which you want to split a single run of tempest
 across 2 executions of tempest run. (for example to run part of the tests
 serially and others in parallel) To accomplish this but still treat the results
-as a single run you can leverage the **--combine** option which will append
+as a single run you can leverage the ``--combine`` option which will append
 the current run's results with the previous runs.
 """
 
diff --git a/tempest/cmd/subunit_describe_calls.py b/tempest/cmd/subunit_describe_calls.py
index f9ebe20..f0ade7e 100644
--- a/tempest/cmd/subunit_describe_calls.py
+++ b/tempest/cmd/subunit_describe_calls.py
@@ -21,17 +21,14 @@
 Runtime Arguments
 -----------------
 
-**--subunit, -s**: (Optional) The path to the subunit file being parsed,
-defaults to stdin
-
-**--non-subunit-name, -n**: (Optional) The file_name that the logs are being
-stored in
-
-**--output-file, -o**: (Optional) The path where the JSON output will be
-written to. This contains more information than is present in stdout.
-
-**--ports, -p**: (Optional) The path to a JSON file describing the ports being
-used by different services
+* ``--subunit, -s``: (Optional) The path to the subunit file being parsed,
+  defaults to stdin
+* ``--non-subunit-name, -n``: (Optional) The file_name that the logs are being
+  stored in
+* ``--output-file, -o``: (Optional) The path where the JSON output will be
+  written to. This contains more information than is present in stdout.
+* ``--ports, -p``: (Optional) The path to a JSON file describing the ports
+  being used by different services
 
 Usage
 -----
diff --git a/tempest/cmd/workspace.py b/tempest/cmd/workspace.py
index 8166b4f..929a584 100644
--- a/tempest/cmd/workspace.py
+++ b/tempest/cmd/workspace.py
@@ -26,28 +26,28 @@
 
 register
 --------
-Registers a new tempest workspace via a given --name and --path
+Registers a new tempest workspace via a given ``--name`` and ``--path``
 
 rename
 ------
-Renames a tempest workspace from --old-name to --new-name
+Renames a tempest workspace from ``--old-name`` to ``--new-name``
 
 move
 ----
-Changes the path of a given tempest workspace --name to --path
+Changes the path of a given tempest workspace ``--name`` to ``--path``
 
 remove
 ------
-Deletes the entry for a given tempest workspace --name
+Deletes the entry for a given tempest workspace ``--name``
 
---rmdir Deletes the given tempest workspace directory
+``--rmdir`` Deletes the given tempest workspace directory
 
 General Options
 ===============
 
- **--workspace_path**: Allows the user to specify a different location for the
-                       workspace.yaml file containing the workspace definitions
-                       instead of ~/.tempest/workspace.yaml
+* ``--workspace_path``: Allows the user to specify a different location for the
+  workspace.yaml file containing the workspace definitions instead of
+  ``~/.tempest/workspace.yaml``
 """
 
 import os
diff --git a/tempest/common/utils/__init__.py b/tempest/common/utils/__init__.py
index 5a86caa..aa81864 100644
--- a/tempest/common/utils/__init__.py
+++ b/tempest/common/utils/__init__.py
@@ -78,7 +78,7 @@
         decorators.attr(type=list(args))(f)
 
         @functools.wraps(f)
-        def wrapper(self, *func_args, **func_kwargs):
+        def wrapper(*func_args, **func_kwargs):
             service_list = get_service_list()
 
             for service in args:
@@ -86,7 +86,7 @@
                     msg = 'Skipped because the %s service is not available' % (
                         service)
                     raise testtools.TestCase.skipException(msg)
-            return f(self, *func_args, **func_kwargs)
+            return f(*func_args, **func_kwargs)
         return wrapper
     return decorator
 
diff --git a/tempest/common/waiters.py b/tempest/common/waiters.py
index 10afee0..08e2a12 100644
--- a/tempest/common/waiters.py
+++ b/tempest/common/waiters.py
@@ -179,15 +179,13 @@
     raise lib_exc.TimeoutException(message)
 
 
-def wait_for_volume_resource_status(client, resource_id, statuses):
-    """Waits for a volume resource to reach any of the specified statuses.
+def wait_for_volume_resource_status(client, resource_id, status):
+    """Waits for a volume resource to reach a given status.
 
     This function is a common function for volume, snapshot and backup
     resources. The function extracts the name of the desired resource from
     the client class name of the resource.
     """
-    if not isinstance(statuses, list):
-        statuses = [statuses]
     resource_name = re.findall(
         r'(volume|group-snapshot|snapshot|backup|group)',
         client.resource_type)[-1].replace('-', '_')
@@ -195,11 +193,11 @@
     resource_status = show_resource(resource_id)[resource_name]['status']
     start = int(time.time())
 
-    while resource_status not in statuses:
+    while resource_status != status:
         time.sleep(client.build_interval)
         resource_status = show_resource(resource_id)[
             '{}'.format(resource_name)]['status']
-        if resource_status == 'error' and resource_status not in statuses:
+        if resource_status == 'error' and resource_status != status:
             raise exceptions.VolumeResourceBuildErrorException(
                 resource_name=resource_name, resource_id=resource_id)
         if resource_name == 'volume' and resource_status == 'error_restoring':
@@ -208,11 +206,11 @@
         if int(time.time()) - start >= client.build_timeout:
             message = ('%s %s failed to reach %s status (current %s) '
                        'within the required time (%s s).' %
-                       (resource_name, resource_id, statuses, resource_status,
+                       (resource_name, resource_id, status, resource_status,
                         client.build_timeout))
             raise lib_exc.TimeoutException(message)
     LOG.info('%s %s reached %s after waiting for %f seconds',
-             resource_name, resource_id, statuses, time.time() - start)
+             resource_name, resource_id, status, time.time() - start)
 
 
 def wait_for_volume_retype(client, volume_id, new_volume_type):
diff --git a/tempest/config.py b/tempest/config.py
index b14d4fd..5eee86d 100644
--- a/tempest/config.py
+++ b/tempest/config.py
@@ -312,9 +312,9 @@
                default=0,
                help='Time in seconds before a shelved instance is eligible '
                     'for removing from a host.  -1 never offload, 0 offload '
-                    'when shelved. This time should be the same as the time '
-                    'of nova.conf, and some tests will run for as long as the '
-                    'time.'),
+                    'when shelved. This configuration value should be same as '
+                    '[nova.DEFAULT]->shelved_offload_time in nova.conf, and '
+                    'some tests will run for as long as the time.'),
     cfg.IntOpt('min_compute_nodes',
                default=1,
                help=('The minimum number of compute nodes expected. This will '
diff --git a/tempest/lib/decorators.py b/tempest/lib/decorators.py
index ef1003b..e99dd24 100644
--- a/tempest/lib/decorators.py
+++ b/tempest/lib/decorators.py
@@ -15,7 +15,6 @@
 import functools
 import uuid
 
-import debtcollector.removals
 from oslo_log import log as logging
 import six
 import testtools
@@ -56,9 +55,9 @@
     """
     def decorator(f):
         @functools.wraps(f)
-        def wrapper(self, *func_args, **func_kwargs):
+        def wrapper(*func_args, **func_kwargs):
             try:
-                return f(self, *func_args, **func_kwargs)
+                return f(*func_args, **func_kwargs)
             except Exception as exc:
                 exc_status_code = getattr(exc, 'status_code', None)
                 if status_code is None or status_code == exc_status_code:
@@ -87,25 +86,6 @@
     return decorator
 
 
-@debtcollector.removals.remove(removal_version='Queen')
-class skip_unless_attr(object):
-    """Decorator to skip tests if a specified attr does not exists or False"""
-    def __init__(self, attr, msg=None):
-        self.attr = attr
-        self.message = msg or ("Test case attribute %s not found "
-                               "or False") % attr
-
-    def __call__(self, func):
-        @functools.wraps(func)
-        def _skipper(*args, **kw):
-            """Wrapped skipper function."""
-            testobj = args[0]
-            if not getattr(testobj, self.attr, False):
-                raise testtools.TestCase.skipException(self.message)
-            func(*args, **kw)
-        return _skipper
-
-
 def attr(**kwargs):
     """A decorator which applies the testtools attr decorator
 
diff --git a/tempest/lib/exceptions.py b/tempest/lib/exceptions.py
index 9b2e87e..13af890 100644
--- a/tempest/lib/exceptions.py
+++ b/tempest/lib/exceptions.py
@@ -96,7 +96,7 @@
 
 class Conflict(ClientRestClientException):
     status_code = 409
-    message = "An object with that identifier already exists"
+    message = "Conflict with state of target resource"
 
 
 class Gone(ClientRestClientException):
diff --git a/tempest/scenario/README.rst b/tempest/scenario/README.rst
index ad300c2..efcd139 100644
--- a/tempest/scenario/README.rst
+++ b/tempest/scenario/README.rst
@@ -15,6 +15,7 @@
 Any scenario test should have a real-life use case. An example would be:
 
 - "As operator I want to start with a blank environment":
+
   1. upload a glance image
   2. deploy a vm from it
   3. ssh to the guest
diff --git a/tempest/scenario/test_network_basic_ops.py b/tempest/scenario/test_network_basic_ops.py
index 6332c6d..ff8837f 100644
--- a/tempest/scenario/test_network_basic_ops.py
+++ b/tempest/scenario/test_network_basic_ops.py
@@ -421,6 +421,10 @@
     def test_mtu_sized_frames(self):
         """Validate that network MTU sized frames fit through."""
         self._setup_network_and_servers()
+        # first check that connectivity works in general for the instance
+        self.check_public_network_connectivity(should_connect=True)
+        # now that we checked general connectivity, test that full size frames
+        # can also pass between nodes
         self.check_public_network_connectivity(
             should_connect=True, mtu=self.network['mtu'])
 
diff --git a/tempest/scenario/test_volume_boot_pattern.py b/tempest/scenario/test_volume_boot_pattern.py
index 64ea8f6..beb039c 100644
--- a/tempest/scenario/test_volume_boot_pattern.py
+++ b/tempest/scenario/test_volume_boot_pattern.py
@@ -208,7 +208,19 @@
 
         # boot instance from EBS image
         instance = self.create_server(image_id=image['id'])
-        # just ensure that instance booted
+
+        # Verify the server was created from the image
+        created_volume = instance['os-extended-volumes:volumes_attached']
+        self.assertNotEmpty(created_volume, "No volume attachment found.")
+        created_volume_info = self.volumes_client.show_volume(
+            created_volume[0]['id'])['volume']
+        self.assertEqual(instance['id'],
+                         created_volume_info['attachments'][0]['server_id'])
+        self.assertEqual(created_volume[0]['id'],
+                         created_volume_info['attachments'][0]['volume_id'])
+        self.assertEqual(
+            volume_origin['volume_image_metadata']['image_id'],
+            created_volume_info['volume_image_metadata']['image_id'])
 
         # delete instance
         self._delete_server(instance)
diff --git a/tempest/tests/lib/services/network/test_networks_client.py b/tempest/tests/lib/services/network/test_networks_client.py
new file mode 100644
index 0000000..078f4b0
--- /dev/null
+++ b/tempest/tests/lib/services/network/test_networks_client.py
@@ -0,0 +1,242 @@
+# Copyright 2017 AT&T Corporation.
+# All rights reserved.
+#
+#    Licensed under the Apache License, Version 2.0 (the "License"); you may
+#    not use this file except in compliance with the License. You may obtain
+#    a copy of the License at
+#
+#         http://www.apache.org/licenses/LICENSE-2.0
+#
+#    Unless required by applicable law or agreed to in writing, software
+#    distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+#    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+#    License for the specific language governing permissions and limitations
+#    under the License.
+
+import copy
+
+from tempest.lib.services.network import networks_client
+from tempest.tests.lib import fake_auth_provider
+from tempest.tests.lib.services import base
+
+
+class TestNetworksClient(base.BaseServiceTest):
+
+    FAKE_NETWORKS = {
+        "networks": [
+            {
+                "admin_state_up": True,
+                "availability_zone_hints": [],
+                "availability_zones": [
+                    "nova"
+                ],
+                "created_at": "2016-03-08T20:19:41",
+                "id": "d32019d3-bc6e-4319-9c1d-6722fc136a22",
+                "mtu": 0,
+                "name": "net1",
+                "port_security_enabled": True,
+                "project_id": "4fd44f30292945e481c7b8a0c8908869",
+                "qos_policy_id": "6a8454ade84346f59e8d40665f878b2e",
+                "router:external": False,
+                "shared": False,
+                "status": "ACTIVE",
+                "subnets": [
+                        "54d6f61d-db07-451c-9ab3-b9609b6b6f0b"
+                ],
+                "tenant_id": "4fd44f30292945e481c7b8a0c8908869",
+                "updated_at": "2016-03-08T20:19:41",
+                "vlan_transparent": True,
+                "description": ""
+            },
+            {
+                "admin_state_up": True,
+                "availability_zone_hints": [],
+                "availability_zones": [
+                    "nova"
+                ],
+                "id": "db193ab3-96e3-4cb3-8fc5-05f4296d0324",
+                "mtu": 0,
+                "name": "net2",
+                "port_security_enabled": True,
+                "project_id": "26a7980765d0414dbc1fc1f88cdb7e6e",
+                "qos_policy_id": "bfdb6c39f71e4d44b1dfbda245c50819",
+                "router:external": False,
+                "shared": False,
+                "status": "ACTIVE",
+                "subnets": [
+                        "08eae331-0402-425a-923c-34f7cfe39c1b"
+                ],
+                "tenant_id": "26a7980765d0414dbc1fc1f88cdb7e6e",
+                "updated_at": "2016-03-08T20:19:41",
+                "vlan_transparent": False,
+                "description": ""
+            }
+        ]
+    }
+
+    FAKE_NETWORK_ID = "d32019d3-bc6e-4319-9c1d-6722fc136a22"
+
+    FAKE_NETWORK1 = {
+        "name": "net1",
+        "admin_state_up": True,
+        "qos_policy_id": "6a8454ade84346f59e8d40665f878b2e"
+    }
+
+    FAKE_NETWORK2 = {
+        "name": "net2",
+        "admin_state_up": True,
+        "qos_policy_id": "bfdb6c39f71e4d44b1dfbda245c50819"
+    }
+
+    FAKE_NETWORKS_REQ = {
+        "networks": [
+            FAKE_NETWORK1,
+            FAKE_NETWORK2
+        ]
+    }
+
+    FAKE_DHCP_AGENT_NETWORK_ID = "80515c45-651f-4f9a-b82b-2ca8a7301a8d"
+
+    FAKE_DHCP_AGENTS = {
+        "agents": [
+            {
+                "binary": "neutron-dhcp-agent",
+                "description": None,
+                "admin_state_up": True,
+                "heartbeat_timestamp": "2017-06-22 18:29:50",
+                "availability_zone": "nova",
+                "alive": True,
+                "topic": "dhcp_agent",
+                "host": "osboxes",
+                "agent_type": "DHCP agent",
+                "resource_versions": {},
+                "created_at": "2017-06-19 21:39:51",
+                "started_at": "2017-06-19 21:39:51",
+                "id": "b6cfb7a1-6ac4-4980-993c-9d295d37062e",
+                "configurations": {
+                    "subnets": 2,
+                    "dhcp_lease_duration": 86400,
+                    "dhcp_driver": "neutron.agent.linux.dhcp.Dnsmasq",
+                    "networks": 1,
+                    "log_agent_heartbeats": False,
+                    "ports": 3
+                }
+            }
+        ]
+    }
+
+    def setUp(self):
+        super(TestNetworksClient, self).setUp()
+        fake_auth = fake_auth_provider.FakeAuthProvider()
+        self.networks_client = networks_client.NetworksClient(
+            fake_auth, "network", "regionOne")
+
+    def _test_list_networks(self, bytes_body=False):
+        self.check_service_client_function(
+            self.networks_client.list_networks,
+            "tempest.lib.common.rest_client.RestClient.get",
+            self.FAKE_NETWORKS,
+            bytes_body,
+            200)
+
+    def _test_create_network(self, bytes_body=False):
+        self.check_service_client_function(
+            self.networks_client.create_network,
+            "tempest.lib.common.rest_client.RestClient.post",
+            {"network": self.FAKE_NETWORKS["networks"][0]},
+            bytes_body,
+            201,
+            **self.FAKE_NETWORK1)
+
+    def _test_create_bulk_networks(self, bytes_body=False):
+        self.check_service_client_function(
+            self.networks_client.create_bulk_networks,
+            "tempest.lib.common.rest_client.RestClient.post",
+            self.FAKE_NETWORKS,
+            bytes_body,
+            201,
+            networks=self.FAKE_NETWORKS_REQ)
+
+    def _test_show_network(self, bytes_body=False):
+        self.check_service_client_function(
+            self.networks_client.show_network,
+            "tempest.lib.common.rest_client.RestClient.get",
+            {"network": self.FAKE_NETWORKS["networks"][0]},
+            bytes_body,
+            200,
+            network_id=self.FAKE_NETWORK_ID)
+
+    def _test_update_network(self, bytes_body=False):
+        update_kwargs = {
+            "name": "sample_network_5_updated",
+            "qos_policy_id": "6a8454ade84346f59e8d40665f878b2e"
+        }
+
+        resp_body = {
+            "network": copy.deepcopy(
+                self.FAKE_NETWORKS["networks"][0]
+            )
+        }
+        resp_body["network"].update(update_kwargs)
+
+        self.check_service_client_function(
+            self.networks_client.update_network,
+            "tempest.lib.common.rest_client.RestClient.put",
+            resp_body,
+            bytes_body,
+            200,
+            network_id=self.FAKE_NETWORK_ID,
+            **update_kwargs)
+
+    def _test_list_dhcp_agents_on_hosting_network(self, bytes_body=False):
+        self.check_service_client_function(
+            self.networks_client.list_dhcp_agents_on_hosting_network,
+            "tempest.lib.common.rest_client.RestClient.get",
+            self.FAKE_DHCP_AGENTS,
+            bytes_body,
+            200,
+            network_id=self.FAKE_DHCP_AGENT_NETWORK_ID)
+
+    def test_delete_network(self):
+        self.check_service_client_function(
+            self.networks_client.delete_network,
+            "tempest.lib.common.rest_client.RestClient.delete",
+            {},
+            status=204,
+            network_id=self.FAKE_NETWORK_ID)
+
+    def test_list_networks_with_str_body(self):
+        self._test_list_networks()
+
+    def test_list_networks_with_bytes_body(self):
+        self._test_list_networks(bytes_body=True)
+
+    def test_create_network_with_str_body(self):
+        self._test_create_network()
+
+    def test_create_network_with_bytes_body(self):
+        self._test_create_network(bytes_body=True)
+
+    def test_create_bulk_network_with_str_body(self):
+        self._test_create_bulk_networks()
+
+    def test_create_bulk_network_with_bytes_body(self):
+        self._test_create_bulk_networks(bytes_body=True)
+
+    def test_show_network_with_str_body(self):
+        self._test_show_network()
+
+    def test_show_network_with_bytes_body(self):
+        self._test_show_network(bytes_body=True)
+
+    def test_update_network_with_str_body(self):
+        self._test_update_network()
+
+    def test_update_network_with_bytes_body(self):
+        self._test_update_network(bytes_body=True)
+
+    def test_list_dhcp_agents_on_hosting_network_with_str_body(self):
+        self._test_list_dhcp_agents_on_hosting_network()
+
+    def test_list_dhcp_agents_on_hosting_network_with_bytes_body(self):
+        self._test_list_dhcp_agents_on_hosting_network(bytes_body=True)
diff --git a/tempest/tests/lib/test_decorators.py b/tempest/tests/lib/test_decorators.py
index bbebcd3..ed0eea3 100644
--- a/tempest/tests/lib/test_decorators.py
+++ b/tempest/tests/lib/test_decorators.py
@@ -125,35 +125,6 @@
         self.assertRaises(ValueError, self._test_helper, _id)
 
 
-class TestSkipUnlessAttrDecorator(base.TestCase):
-    def _test_skip_unless_attr(self, attr, expected_to_skip=True):
-        class TestFoo(test.BaseTestCase):
-            expected_attr = not expected_to_skip
-
-            @decorators.skip_unless_attr(attr)
-            def test_foo(self):
-                pass
-
-        t = TestFoo('test_foo')
-        if expected_to_skip:
-            self.assertRaises(testtools.TestCase.skipException,
-                              t.test_foo)
-        else:
-            try:
-                t.test_foo()
-            except Exception:
-                raise testtools.TestCase.failureException()
-
-    def test_skip_attr_does_not_exist(self):
-        self._test_skip_unless_attr('unexpected_attr')
-
-    def test_skip_attr_false(self):
-        self._test_skip_unless_attr('expected_attr')
-
-    def test_no_skip_for_attr_exist_and_true(self):
-        self._test_skip_unless_attr('expected_attr', expected_to_skip=False)
-
-
 class TestRelatedBugDecorator(base.TestCase):
     def test_relatedbug_when_no_exception(self):
         f = mock.Mock()
diff --git a/tools/generate-tempest-plugins-list.py b/tools/generate-tempest-plugins-list.py
index 99df0d1..dd05438 100644
--- a/tools/generate-tempest-plugins-list.py
+++ b/tools/generate-tempest-plugins-list.py
@@ -28,12 +28,12 @@
 
 try:
     # For Python 3.0 and later
-    from urllib.error import HTTPError as HTTPError
+    from urllib.error import HTTPError
     import urllib.request as urllib
 except ImportError:
     # Fall back to Python 2's urllib2
     import urllib2 as urllib
-    from urllib2 import HTTPError as HTTPError
+    from urllib2 import HTTPError
 
 
 url = 'https://review.openstack.org/projects/'
diff --git a/tox.ini b/tox.ini
index 21696eb..db5976f 100644
--- a/tox.ini
+++ b/tox.ini
@@ -36,7 +36,17 @@
 commands = oslo-config-generator --config-file tempest/cmd/config-generator.tempest.conf
 
 [testenv:cover]
-commands = python setup.py testr --coverage --testr-arg='tempest\.tests {posargs}'
+setenv =
+  {[testenv]setenv}
+  PYTHON=coverage run --source tempest --parallel-mode
+commands =
+  coverage erase
+  find . -type f -name "*.pyc" -delete
+  stestr --test-path ./tempest/tests run {posargs}
+  coverage combine
+  coverage html -d cover
+  coverage xml -o cover/coverage.xml
+  coverage report
 
 [testenv:all]
 envdir = .tox/tempest
@@ -50,17 +60,6 @@
     find . -type f -name "*.pyc" -delete
     tempest run --regex {posargs}
 
-[testenv:ostestr]
-sitepackages = {[tempestenv]sitepackages}
-# 'all' includes slow tests
-setenv =
-    {[tempestenv]setenv}
-    OS_TEST_TIMEOUT={env:OS_TEST_TIMEOUT:1200}
-deps = {[tempestenv]deps}
-commands =
-    find . -type f -name "*.pyc" -delete
-    ostestr {posargs}
-
 [testenv:all-plugin]
 sitepackages = True
 # 'all' includes slow tests