diff --git a/doc/source/index.rst b/doc/source/index.rst
index 98b006d..1faf711 100644
--- a/doc/source/index.rst
+++ b/doc/source/index.rst
@@ -51,6 +51,7 @@
    account_generator
    cleanup
    javelin
+   subunit_describe_calls
    workspace
 
 ==================
diff --git a/doc/source/subunit_describe_calls.rst b/doc/source/subunit_describe_calls.rst
new file mode 100644
index 0000000..2bda50c
--- /dev/null
+++ b/doc/source/subunit_describe_calls.rst
@@ -0,0 +1,5 @@
+------------------------------
+Subunit Describe Calls Utility
+------------------------------
+
+.. automodule:: tempest.cmd.subunit_describe_calls
diff --git a/releasenotes/notes/add_subunit_describe_calls-5498a37e6cd66c4b.yaml b/releasenotes/notes/add_subunit_describe_calls-5498a37e6cd66c4b.yaml
new file mode 100644
index 0000000..b457ddd
--- /dev/null
+++ b/releasenotes/notes/add_subunit_describe_calls-5498a37e6cd66c4b.yaml
@@ -0,0 +1,4 @@
+---
+features:
+  - Adds subunit-describe-calls. A parser for subunit streams to determine what
+    REST API calls are made inside of a test and in what order they are called.
diff --git a/setup.cfg b/setup.cfg
index 0bf493c..56344b0 100644
--- a/setup.cfg
+++ b/setup.cfg
@@ -34,6 +34,7 @@
     tempest = tempest.cmd.main:main
     skip-tracker = tempest.lib.cmd.skip_tracker:main
     check-uuid = tempest.lib.cmd.check_uuid:run
+    subunit-describe-calls = tempest.cmd.subunit_describe_calls:entry_point
 tempest.cm =
     account-generator = tempest.cmd.account_generator:TempestAccountGenerator
     init = tempest.cmd.init:TempestInit
diff --git a/tempest/cmd/subunit_describe_calls.py b/tempest/cmd/subunit_describe_calls.py
new file mode 100644
index 0000000..c990add
--- /dev/null
+++ b/tempest/cmd/subunit_describe_calls.py
@@ -0,0 +1,259 @@
+# Copyright 2016 Rackspace
+#
+# All Rights Reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License"); you may
+# not use this file except in compliance with the License. You may obtain
+# a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+# License for the specific language governing permissions and limitations
+# under the License.
+
+"""
+subunit-describe-calls is a parser for subunit streams to determine what REST
+API calls are made inside of a test and in what order they are called.
+
+Runtime Arguments
+-----------------
+
+**--subunit, -s**: (Required) The path to the subunit file being parsed
+
+**--non-subunit-name, -n**: (Optional) The file_name that the logs are being
+stored in
+
+**--output-file, -o**: (Required) The path where the JSON output will be
+written to
+
+**--ports, -p**: (Optional) The path to a JSON file describing the ports being
+used by different services
+
+Usage
+-----
+
+subunit-describe-calls will take in a file path via the --subunit parameter
+which contains either a subunit v1 or v2 stream. This is then parsed checking
+for details contained in the file_bytes of the --non-subunit-name parameter
+(the default is pythonlogging which is what Tempest uses to store logs). By
+default the OpenStack Kilo release port defaults (http://bit.ly/22jpF5P)
+are used unless a file is provided via the --ports option. The resulting output
+is dumped in JSON output to the path provided in the --output-file option.
+
+Ports file JSON structure
+^^^^^^^^^^^^^^^^^^^^^^^^^
+
+  {
+      "<port number>": "<name of service>",
+      ...
+  }
+
+
+Output file JSON structure
+^^^^^^^^^^^^^^^^^^^^^^^^^^
+  {
+      "full_test_name[with_id_and_tags]": [
+          {
+              "name": "The ClassName.MethodName that made the call",
+              "verb": "HTTP Verb",
+              "service": "Name of the service",
+              "url": "A shortened version of the URL called",
+              "status_code": "The status code of the response"
+          }
+      ]
+  }
+"""
+import argparse
+import collections
+import io
+import json
+import os
+import re
+
+import subunit
+import testtools
+
+
+class UrlParser(testtools.TestResult):
+    uuid_re = re.compile(r'(^|[^0-9a-f])[0-9a-f]{8}-[0-9a-f]{4}-[0-9a-f]{4}-'
+                         '[0-9a-f]{4}-[0-9a-f]{12}([^0-9a-f]|$)')
+    id_re = re.compile(r'(^|[^0-9a-z])[0-9a-z]{8}[0-9a-z]{4}[0-9a-z]{4}'
+                       '[0-9a-z]{4}[0-9a-z]{12}([^0-9a-z]|$)')
+    ip_re = re.compile(r'(^|[^0-9])[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]'
+                       '{1,3}([^0-9]|$)')
+    url_re = re.compile(r'.*INFO.*Request \((?P<name>.*)\): (?P<code>[\d]{3}) '
+                        '(?P<verb>\w*) (?P<url>.*) .*')
+    port_re = re.compile(r'.*:(?P<port>\d+).*')
+    path_re = re.compile(r'http[s]?://[^/]*/(?P<path>.*)')
+
+    # Based on mitaka defaults:
+    # http://docs.openstack.org/mitaka/config-reference/
+    # firewalls-default-ports.html
+    services = {
+        "8776": "Block Storage",
+        "8774": "Nova",
+        "8773": "Nova-API", "8775": "Nova-API",
+        "8386": "Sahara",
+        "35357": "Keystone", "5000": "Keystone",
+        "9292": "Glance", "9191": "Glance",
+        "9696": "Neutron",
+        "6000": "Swift", "6001": "Swift", "6002": "Swift",
+        "8004": "Heat", "8000": "Heat", "8003": "Heat",
+        "8777": "Ceilometer",
+        "80": "Horizon",
+        "8080": "Swift",
+        "443": "SSL",
+        "873": "rsync",
+        "3260": "iSCSI",
+        "3306": "MySQL",
+        "5672": "AMQP"}
+
+    def __init__(self, services=None):
+        super(UrlParser, self).__init__()
+        self.test_logs = {}
+        self.services = services or self.services
+
+    def addSuccess(self, test, details=None):
+        output = test.shortDescription() or test.id()
+        calls = self.parse_details(details)
+        self.test_logs.update({output: calls})
+
+    def addSkip(self, test, err, details=None):
+        output = test.shortDescription() or test.id()
+        calls = self.parse_details(details)
+        self.test_logs.update({output: calls})
+
+    def addError(self, test, err, details=None):
+        output = test.shortDescription() or test.id()
+        calls = self.parse_details(details)
+        self.test_logs.update({output: calls})
+
+    def addFailure(self, test, err, details=None):
+        output = test.shortDescription() or test.id()
+        calls = self.parse_details(details)
+        self.test_logs.update({output: calls})
+
+    def stopTestRun(self):
+        super(UrlParser, self).stopTestRun()
+
+    def startTestRun(self):
+        super(UrlParser, self).startTestRun()
+
+    def parse_details(self, details):
+        if details is None:
+            return
+
+        calls = []
+        for _, detail in details.items():
+            for line in detail.as_text().split("\n"):
+                match = self.url_re.match(line)
+                if match is not None:
+                    calls.append({
+                        "name": match.group("name"),
+                        "verb": match.group("verb"),
+                        "status_code": match.group("code"),
+                        "service": self.get_service(match.group("url")),
+                        "url": self.url_path(match.group("url"))})
+
+        return calls
+
+    def get_service(self, url):
+        match = self.port_re.match(url)
+        if match is not None:
+            return self.services.get(match.group("port"), "Unknown")
+        return "Unknown"
+
+    def url_path(self, url):
+        match = self.path_re.match(url)
+        if match is not None:
+            path = match.group("path")
+            path = self.uuid_re.sub(r'\1<uuid>\2', path)
+            path = self.ip_re.sub(r'\1<ip>\2', path)
+            path = self.id_re.sub(r'\1<id>\2', path)
+            return path
+        return url
+
+
+class FileAccumulator(testtools.StreamResult):
+
+    def __init__(self, non_subunit_name='pythonlogging'):
+        super(FileAccumulator, self).__init__()
+        self.route_codes = collections.defaultdict(io.BytesIO)
+        self.non_subunit_name = non_subunit_name
+
+    def status(self, **kwargs):
+        if kwargs.get('file_name') != self.non_subunit_name:
+            return
+        file_bytes = kwargs.get('file_bytes')
+        if not file_bytes:
+            return
+        route_code = kwargs.get('route_code')
+        stream = self.route_codes[route_code]
+        stream.write(file_bytes)
+
+
+class ArgumentParser(argparse.ArgumentParser):
+    def __init__(self):
+        desc = "Outputs all HTTP calls a given test made that were logged."
+        super(ArgumentParser, self).__init__(description=desc)
+
+        self.prog = "Argument Parser"
+
+        self.add_argument(
+            "-s", "--subunit", metavar="<subunit file>", required=True,
+            default=None, help="The path to the subunit output file.")
+
+        self.add_argument(
+            "-n", "--non-subunit-name", metavar="<non subunit name>",
+            default="pythonlogging",
+            help="The name used in subunit to describe the file contents.")
+
+        self.add_argument(
+            "-o", "--output-file", metavar="<output file>", default=None,
+            help="The output file name for the json.", required=True)
+
+        self.add_argument(
+            "-p", "--ports", metavar="<ports file>", default=None,
+            help="A JSON file describing the ports for each service.")
+
+
+def parse(subunit_file, non_subunit_name, ports):
+    if ports is not None and os.path.exists(ports):
+        ports = json.loads(open(ports).read())
+
+    url_parser = UrlParser(ports)
+    stream = open(subunit_file, 'rb')
+    suite = subunit.ByteStreamToStreamResult(
+        stream, non_subunit_name=non_subunit_name)
+    result = testtools.StreamToExtendedDecorator(url_parser)
+    accumulator = FileAccumulator(non_subunit_name)
+    result = testtools.StreamResultRouter(result)
+    result.add_rule(accumulator, 'test_id', test_id=None)
+    result.startTestRun()
+    suite.run(result)
+
+    for bytes_io in accumulator.route_codes.values():  # v1 processing
+        bytes_io.seek(0)
+        suite = subunit.ProtocolTestCase(bytes_io)
+        suite.run(url_parser)
+    result.stopTestRun()
+
+    return url_parser
+
+
+def output(url_parser, output_file):
+    with open(output_file, "w") as outfile:
+        outfile.write(json.dumps(url_parser.test_logs))
+
+
+def entry_point():
+    cl_args = ArgumentParser().parse_args()
+    parser = parse(cl_args.subunit, cl_args.non_subunit_name, cl_args.ports)
+    output(parser, cl_args.output_file)
+
+
+if __name__ == "__main__":
+    entry_point()
diff --git a/tempest/tests/cmd/sample_streams/calls.subunit b/tempest/tests/cmd/sample_streams/calls.subunit
new file mode 100644
index 0000000..d5b4790
--- /dev/null
+++ b/tempest/tests/cmd/sample_streams/calls.subunit
Binary files differ
diff --git a/tempest/tests/cmd/test_subunit_describe_calls.py b/tempest/tests/cmd/test_subunit_describe_calls.py
new file mode 100644
index 0000000..43b417a
--- /dev/null
+++ b/tempest/tests/cmd/test_subunit_describe_calls.py
@@ -0,0 +1,83 @@
+# Copyright 2016 Rackspace
+#
+# All Rights Reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License"); you may
+# not use this file except in compliance with the License. You may obtain
+# a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+# License for the specific language governing permissions and limitations
+# under the License.
+
+import os
+import subprocess
+import tempfile
+
+from tempest.cmd import subunit_describe_calls
+from tempest.tests import base
+
+
+class TestSubunitDescribeCalls(base.TestCase):
+    def test_return_code(self):
+        subunit_file = os.path.join(
+            os.path.dirname(os.path.abspath(__file__)),
+            'sample_streams/calls.subunit')
+        p = subprocess.Popen([
+            'subunit-describe-calls', '-s', subunit_file,
+            '-o', tempfile.mkstemp()[1]], stdin=subprocess.PIPE)
+        p.communicate()
+        self.assertEqual(0, p.returncode)
+
+    def test_parse(self):
+        subunit_file = os.path.join(
+            os.path.dirname(os.path.abspath(__file__)),
+            'sample_streams/calls.subunit')
+        parser = subunit_describe_calls.parse(
+            subunit_file, "pythonlogging", None)
+        expected_result = {
+            'bar': [{'name': 'AgentsAdminTestJSON:setUp',
+                     'service': 'Nova',
+                     'status_code': '200',
+                     'url': 'v2.1/<id>/os-agents',
+                     'verb': 'POST'},
+                    {'name': 'AgentsAdminTestJSON:test_create_agent',
+                     'service': 'Nova',
+                     'status_code': '200',
+                     'url': 'v2.1/<id>/os-agents',
+                     'verb': 'POST'},
+                    {'name': 'AgentsAdminTestJSON:tearDown',
+                     'service': 'Nova',
+                     'status_code': '200',
+                     'url': 'v2.1/<id>/os-agents/1',
+                     'verb': 'DELETE'},
+                    {'name': 'AgentsAdminTestJSON:_run_cleanups',
+                     'service': 'Nova',
+                     'status_code': '200',
+                     'url': 'v2.1/<id>/os-agents/2',
+                     'verb': 'DELETE'}],
+            'foo': [{'name': 'AgentsAdminTestJSON:setUp',
+                     'service': 'Nova',
+                     'status_code': '200',
+                     'url': 'v2.1/<id>/os-agents',
+                     'verb': 'POST'},
+                    {'name': 'AgentsAdminTestJSON:test_delete_agent',
+                     'service': 'Nova',
+                     'status_code': '200',
+                     'url': 'v2.1/<id>/os-agents/3',
+                     'verb': 'DELETE'},
+                    {'name': 'AgentsAdminTestJSON:test_delete_agent',
+                     'service': 'Nova',
+                     'status_code': '200',
+                     'url': 'v2.1/<id>/os-agents',
+                     'verb': 'GET'},
+                    {'name': 'AgentsAdminTestJSON:tearDown',
+                     'service': 'Nova',
+                     'status_code': '404',
+                     'url': 'v2.1/<id>/os-agents/3',
+                     'verb': 'DELETE'}]}
+        self.assertEqual(expected_result, parser.test_logs)