diff --git a/.zuul.yaml b/.zuul.yaml
index 04d60fe..1cf67b0 100644
--- a/.zuul.yaml
+++ b/.zuul.yaml
@@ -1,7 +1,13 @@
 - job:
     name: devstack-tempest
     parent: devstack
-    description: Base Tempest job.
+    nodeset: openstack-single-node
+    description: |
+      Base Tempest job.
+
+      This Tempest job provides the base for both the single and multi-node
+      test setup. To run a multi-node test inherit from devstack-tempest and
+      set the nodeset to a multi-node one.
     required-projects:
       - openstack/tempest
     timeout: 7200
@@ -10,6 +16,11 @@
     vars:
       devstack_services:
         tempest: true
+      devstack_local_conf:
+        test-config:
+          $TEMPEST_CONFIG:
+            compute:
+              min_compute_nodes: "{{ groups['compute'] | default(['controller']) | length }}"
       test_results_stage_name: 'test_results'
       zuul_copy_output:
         '{{ devstack_base_dir }}/tempest/etc/tempest.conf': 'logs'
@@ -81,6 +92,36 @@
         # without Swift, c-bak cannot run (in the Gate at least)
         c-bak: false
 
+- job:
+    name: tempest-multinode-full
+    parent: devstack-tempest
+    nodeset: openstack-two-node
+    # Until the devstack changes are backported, only run this on master
+    branches:
+      - master
+    description: |
+      Base multinode integration test with Neutron networking and py27.
+      Former names for this job were:
+        * neutron-tempest-multinode-full
+        * legacy-tempest-dsvm-neutron-multinode-full
+        * gate-tempest-dsvm-neutron-multinode-full-ubuntu-xenial-nv
+      This job includes two nodes, controller / tempest plus a subnode, but
+      it can be used with different topologies, as long as a controller node
+      and a tempest one exist.
+    vars:
+      tox_envlist: full
+      devstack_localrc:
+        FORCE_CONFIG_DRIVE: False
+        NOVA_ALLOW_MOVE_TO_SAME_HOST: false
+        LIVE_MIGRATION_AVAILABLE: true
+        USE_BLOCK_MIGRATION_FOR_LIVE_MIGRATION: true
+    group-vars:
+      peers:
+        devstack_localrc:
+          NOVA_ALLOW_MOVE_TO_SAME_HOST: false
+          LIVE_MIGRATION_AVAILABLE: true
+          USE_BLOCK_MIGRATION_FOR_LIVE_MIGRATION: true
+
 - nodeset:
     name: openstack-bionic-node
     nodes:
@@ -102,6 +143,27 @@
     voting: false
 
 - job:
+    name: tempest-scenario-all
+    parent: tempest-multinode-full
+    branches:
+      - master
+    description: |
+      This multinode integration job will run all scenario tests including slow
+      tests with lvm multibackend setup. This job will not run any API tests.
+
+      Former names for this job were:
+        * legacy-tempest-dsvm-neutron-scenario-multinode-lvm-multibackend
+        * tempest-scenario-multinode-lvm-multibackend
+    timeout: 10800
+    vars:
+      # 'all' is used for applying the custom regex below.
+      tox_envlist: all
+      devstack_localrc:
+        CINDER_ENABLED_BACKENDS: lvm:lvmdriver-1,lvm:lvmdriver-2
+      tempest_concurrency: 2
+      tempest_test_regex: (^tempest\.(scenario))
+
+- job:
     name: tempest-full-queens
     parent: tempest-full
     override-checkout: stable/queens
@@ -199,6 +261,19 @@
       - openstack/zaqar-tempest-plugin
       - openstack/zun-tempest-plugin
 
+- job:
+    name: tempest-cinder-v2-api
+    parent: devstack-tempest
+    branches:
+      - master
+    description: |
+      This job runs the cinder API test against v2 endpoint.
+    vars:
+      tox_envlist: all
+      tempest_test_regex: api.*volume
+      devstack_localrc:
+        TEMPEST_VOLUME_TYPE: volumev2
+
 - project:
     check:
       jobs:
@@ -207,7 +282,16 @@
               - ^playbooks/
               - ^roles/
               - ^.zuul.yaml$
-        - nova-multiattach
+        - nova-multiattach:
+            irrelevant-files:
+              - ^(test-|)requirements.txt$
+              - ^.*\.rst$
+              - ^doc/.*$
+              - ^etc/.*$
+              - ^releasenotes/.*$
+              - ^setup.cfg$
+              - ^tempest/hacking/.*$
+              - ^tempest/tests/.*$
         - tempest-full-parallel:
             irrelevant-files:
               - ^(test-|)requirements.txt$
@@ -258,13 +342,75 @@
               - ^setup.cfg$
               - ^tempest/hacking/.*$
               - ^tempest/tests/.*$
+        - tempest-multinode-full:
+            irrelevant-files:
+              - ^(test-|)requirements.txt$
+              - ^.*\.rst$
+              - ^doc/.*$
+              - ^etc/.*$
+              - ^releasenotes/.*$
+              - ^setup.cfg$
+              - ^tempest/hacking/.*$
+              - ^tempest/tests/.*$
         - tempest-tox-plugin-sanity-check
+        - tempest-scenario-all:
+            irrelevant-files:
+              - ^(test-|)requirements.txt$
+              - ^.*\.rst$
+              - ^doc/.*$
+              - ^etc/.*$
+              - ^releasenotes/.*$
+              - ^setup.cfg$
+              - ^tempest/hacking/.*$
+              - ^tempest/tests/.*$
+              - ^tempest/api/.*$
+        - nova-cells-v1:
+            irrelevant-files:
+              - ^(test-|)requirements.txt$
+              - ^.*\.rst$
+              - ^doc/.*$
+              - ^etc/.*$
+              - ^releasenotes/.*$
+              - ^setup.cfg$
+              - ^tempest/hacking/.*$
+              - ^tempest/tests/.*$
+        - nova-live-migration:
+            voting: false
+            irrelevant-files:
+              - ^(test-|)requirements.txt$
+              - ^.*\.rst$
+              - ^doc/.*$
+              - ^etc/.*$
+              - ^releasenotes/.*$
+              - ^setup.cfg$
+              - ^tempest/hacking/.*$
+              - ^tempest/tests/.*$
     gate:
       jobs:
-        - nova-multiattach
+        - nova-multiattach:
+            irrelevant-files:
+              - ^(test-|)requirements.txt$
+              - ^.*\.rst$
+              - ^doc/.*$
+              - ^etc/.*$
+              - ^releasenotes/.*$
+              - ^setup.cfg$
+              - ^tempest/hacking/.*$
+              - ^tempest/tests/.*$
+        - tempest-scenario-all:
+            irrelevant-files:
+              - ^(test-|)requirements.txt$
+              - ^.*\.rst$
+              - ^doc/.*$
+              - ^etc/.*$
+              - ^releasenotes/.*$
+              - ^setup.cfg$
+              - ^tempest/hacking/.*$
+              - ^tempest/tests/.*$
+              - ^tempest/api/.*$
     experimental:
       jobs:
-        - nova-cells-v1:
+        - tempest-cinder-v2-api:
             irrelevant-files:
               - ^(test-|)requirements.txt$
               - ^.*\.rst$
diff --git a/HACKING.rst b/HACKING.rst
index bb55ac5..2a7ae1d 100644
--- a/HACKING.rst
+++ b/HACKING.rst
@@ -106,7 +106,7 @@
 test method. You specify the services with the ``tempest.common.utils.services``
 decorator. For example:
 
-@utils.services('compute', 'image')
+``@utils.services('compute', 'image')``
 
 Valid service tag names are the same as the list of directories in tempest.api
 that have tests.
@@ -118,6 +118,59 @@
 in ``tempest.api.compute`` would require a service tag for those services,
 however they do not need to be tagged as ``compute``.
 
+Test Attributes
+---------------
+Tempest leverages `test attributes`_ which are a simple but effective way of
+distinguishing between different "types" of API tests. A test can be "tagged"
+with such attributes using the ``decorators.attr`` decorator, for example::
+
+    @decorators.attr(type=['negative'])
+    def test_aggregate_create_aggregate_name_length_less_than_1(self):
+        [...]
+
+These test attributes can be used for test selection via regular expressions.
+For example, ``(?!.*\[.*\bslow\b.*\])(^tempest\.scenario)`` runs all the tests
+in the ``scenario`` test module, *except* for those tagged with the ``slow``
+attribute (via a negative lookahead in the regular expression). These
+attributes are used in Tempest's ``tox.ini`` as well as Tempest's Zuul job
+definitions for specifying particular batches of Tempest test suites to run.
+
+.. _test attributes: https://testtools.readthedocs.io/en/latest/for-test-authors.html?highlight=attr#test-attributes
+
+Negative Attribute
+^^^^^^^^^^^^^^^^^^
+The ``type='negative'`` attribute is used to signify that a test is a negative
+test, which is a test that handles invalid input gracefully. This attribute
+should be applied to all negative test scenarios.
+
+This attribute must be applied to each test that belongs to a negative test
+class, i.e. a test class name ending with "Negative.*" substring.
+
+.. todo::
+
+  Add a hacking check for ensuring that all classes that contain substring
+  "Negative" have the negative attribute decorator applied above each test.
+
+Slow Attribute
+^^^^^^^^^^^^^^
+The ``type='slow'`` attribute is used to signify that a test takes a long time
+to run, relatively speaking. This attribute is usually applied to
+:ref:`scenario tests <scenario_field_guide>`, which involve a complicated
+series of API operations, the total runtime of which can be relatively long.
+This long runtime has performance implications on `Zuul`_ jobs, which is why
+the ``slow`` attribute is leveraged to run slow tests on a selective basis,
+to keep total `Zuul`_ job runtime down to a reasonable time frame.
+
+.. _Zuul: https://docs.openstack.org/infra/zuul/
+
+Smoke Attribute
+^^^^^^^^^^^^^^^
+The ``type='smoke'`` attribute is used to signify that a test is a so-called
+smoke test, which is a type of test that tests the most vital OpenStack
+functionality, like listing servers or flavors or creating volumes. The
+attribute should be sparingly applied to only the tests that sanity-check the
+most essential functionality of an OpenStack cloud.
+
 Test fixtures and resources
 ---------------------------
 Test level resources should be cleaned-up after the test execution. Clean-up
diff --git a/README.rst b/README.rst
index 044ae09..2243536 100644
--- a/README.rst
+++ b/README.rst
@@ -212,18 +212,6 @@
 For more information on these options and details about stestr, please see the
 `stestr documentation <http://stestr.readthedocs.io/en/latest/MANUAL.html>`_.
 
-Python 2.6
-----------
-
-Starting in the Kilo release the OpenStack services dropped all support for
-python 2.6. This change has been mirrored in Tempest, starting after the
-tempest-2 tag. This means that proposed changes to Tempest which only fix
-python 2.6 compatibility will be rejected, and moving forward more features not
-present in python 2.6 will be used. If you're running your OpenStack services
-on an earlier release with python 2.6 you can easily run Tempest against it
-from a remote system running python 2.7. (or deploy a cloud guest in your cloud
-that has python 2.7)
-
 Python 3.x
 ----------
 
diff --git a/REVIEWING.rst b/REVIEWING.rst
index a880181..8a1e152 100644
--- a/REVIEWING.rst
+++ b/REVIEWING.rst
@@ -99,6 +99,39 @@
 scenario tests this is up to the reviewers discretion whether a docstring is
 required or not.
 
+
+Test Removal and Refactoring
+----------------------------
+Make sure that any test that is renamed, relocated (e.g. moved to another
+class), or removed does not belong to the `interop`_ testing suite -- which
+includes a select suite of Tempest tests for the purposes of validating that
+OpenStack vendor clouds are interoperable -- or a project's `whitelist`_ or
+`blacklist`_ files.
+
+It is of critical importance that no interop, whitelist or blacklist test
+reference be broken by a patch set introduced to Tempest that renames,
+relocates or removes a referenced test.
+
+Please check the existence of code which references Tempest tests with:
+http://codesearch.openstack.org/
+
+Interop
+^^^^^^^
+Make sure that modifications to an `interop`_ test are backwards-compatible.
+This means that code modifications to tests should not undermine the quality of
+the validation currently performed by the test or significantly alter the
+behavior of the test.
+
+Removal
+^^^^^^^
+Reference the :ref:`test-removal` guidelines for understanding best practices
+associated with test removal.
+
+.. _interop: https://www.openstack.org/brand/interop
+.. _whitelist: https://docs.openstack.org/tempest/latest/run.html#test-selection
+.. _blacklist: https://docs.openstack.org/tempest/latest/run.html#test-selection
+
+
 Release Notes
 -------------
 Release notes are how we indicate to users and other consumers of Tempest what
@@ -113,16 +146,18 @@
 
 .. _reno: https://docs.openstack.org/reno/latest/
 
+
 Deprecated Code
 ---------------
 Sometimes we have some bugs in deprecated code. Basically, we leave it. Because
 we don't need to maintain it. However, if the bug is critical, we might need to
 fix it. When it will happen, we will deal with it on a case-by-case basis.
 
+
 When to approve
 ---------------
 * Every patch needs two +2s before being approved.
-* Its ok to hold off on an approval until a subject matter expert reviews it
+* It's ok to hold off on an approval until a subject matter expert reviews it
 * If a patch has already been approved but requires a trivial rebase to merge,
   you do not have to wait for a second +2, since the patch has already had
   two +2s.
diff --git a/doc/source/configuration.rst b/doc/source/configuration.rst
index d0d7320..2e5f706 100644
--- a/doc/source/configuration.rst
+++ b/doc/source/configuration.rst
@@ -172,7 +172,7 @@
 resize test).
 
 Using a smaller flavor is generally recommended. When larger flavors are used,
-the extra time required to bring up servers will likely affect total run time
+the extra time required to bring up servers will likely affect the total run time
 and probably require tweaking timeout values to ensure tests have ample time to
 finish.
 
@@ -207,7 +207,7 @@
 
 The behavior of these options is a bit convoluted (which will likely be fixed in
 future versions). You first need to specify ``img_dir``, which is the directory
-in which Tempest will look for the image files. First it will check if the
+in which Tempest will look for the image files. First, it will check if the
 filename set for ``img_file`` could be found in ``img_dir``. If it is found then
 the ``img_container_format`` and ``img_disk_format`` options are used to upload
 that image to glance. However, if it is not found, Tempest will look for the
@@ -239,7 +239,7 @@
 """"""""""""""""""""""""""""""""""
 When Tempest creates servers for testing, some tests require being able to
 connect those servers. Depending on the configuration of the cloud, the methods
-for doing this can be different. In certain configurations it is required to
+for doing this can be different. In certain configurations, it is required to
 specify a single network with server create calls. Accordingly, Tempest provides
 a few different methods for providing this information in configuration to try
 and ensure that regardless of the cloud's configuration it'll still be able to
@@ -297,10 +297,10 @@
 ''''''''''''''''''''''''
 With dynamic credentials enabled and using nova-network, your only option for
 configuration is to either set a fixed network name or not. However, in most
-cases it shouldn't matter because nova-network should have no problem booting a
+cases, it shouldn't matter because nova-network should have no problem booting a
 server with multiple networks. If this is not the case for your cloud then using
 an accounts file is recommended because it provides the necessary flexibility to
-describe your configuration. Dynamic credentials is not able to dynamically
+describe your configuration. Dynamic credentials are not able to dynamically
 allocate things as necessary if Neutron is not enabled.
 
 With Neutron and dynamic credentials enabled there should not be any additional
@@ -352,7 +352,7 @@
 OpenStack is really a constellation of several different projects which
 are running together to create a cloud. However which projects you're running
 is not set in stone, and which services are running is up to the deployer.
-Tempest however needs to know which services are available so it can figure
+Tempest, however, needs to know which services are available so it can figure
 out which tests it is able to run and certain setup steps which differ based
 on the available services.
 
@@ -390,8 +390,8 @@
 
 .. note::
 
-    Tempest does not serve all kinds of fancy URLs in the service catalog.  The
-    service catalog should be in a standard format (which is going to be
+    Tempest does not serve all kinds of fancy URLs in the service catalog.
+    The service catalog should be in a standard format (which is going to be
     standardized at the Keystone level).
     Tempest expects URLs in the Service catalog in the following format:
 
@@ -413,10 +413,10 @@
 certain operations and features aren't supported depending on the configuration.
 These features may or may not be discoverable from the API so the burden is
 often on the user to figure out what is supported by the cloud they're talking
-to.  Besides the obvious interoperability issues with this it also leaves
+to. Besides the obvious interoperability issues with this, it also leaves
 Tempest in an interesting situation trying to figure out which tests are
 expected to work. However, Tempest tests do not rely on dynamic API discovery
-for a feature (assuming one exists). Instead Tempest has to be explicitly
+for a feature (assuming one exists). Instead, Tempest has to be explicitly
 configured as to which optional features are enabled. This is in order to
 prevent bugs in the discovery mechanisms from masking failures.
 
@@ -432,8 +432,8 @@
 ^^^^^^^^^^^^^^
 The service feature-enabled sections often contain an ``api-extensions`` option
 (or in the case of Swift a ``discoverable_apis`` option). This is used to tell
-Tempest which api extensions (or configurable middleware) is used in your
+Tempest which API extensions (or configurable middleware) is used in your
 deployment. It has two valid config states: either it contains a single value
-``all`` (which is the default) which means that every api extension is assumed
+``all`` (which is the default) which means that every API extension is assumed
 to be enabled, or it is set to a list of each individual extension that is
 enabled for that service.
diff --git a/doc/source/index.rst b/doc/source/index.rst
index f562850..fecf98a 100644
--- a/doc/source/index.rst
+++ b/doc/source/index.rst
@@ -80,6 +80,14 @@
 
    library
 
+Support Policy
+--------------
+
+.. toctree::
+   :maxdepth: 2
+
+   stable_branch_support_policy
+
 Indices and tables
 ==================
 
diff --git a/doc/source/library.rst b/doc/source/library.rst
index 14415ae..6a12c45 100644
--- a/doc/source/library.rst
+++ b/doc/source/library.rst
@@ -4,12 +4,12 @@
 =============================
 
 Tempest provides a stable library interface that provides external tools or
-test suites an interface for reusing pieces of tempest code. Any public
-interface that lives in tempest/lib in the tempest repo is treated as a stable
+test suites an interface for reusing pieces of Tempest code. Any public
+interface that lives in tempest/lib in the Tempest repo is treated as a stable
 public interface and it should be safe to external consume that. Every effort
 goes into maintaining backwards compatibility with any change.
 The library is self contained and doesn't have any dependency on
-other tempest internals outside of lib (including no usage of tempest
+other Tempest internals outside of lib (including no usage of Tempest
 configuration).
 
 Stability
@@ -32,7 +32,7 @@
 Making changes
 ''''''''''''''
 When making changes to tempest/lib you have to be conscious of the effect of
-any changes on external consumers. If your proposed changeset will change the
+any changes on external consumers. If your proposed change set will change the
 default behaviour of any interface, or make something which previously worked
 not after your change, then it is not acceptable. Every effort needs to go into
 preserving backwards compatibility in changes.
@@ -40,8 +40,8 @@
 Reviewing
 '''''''''
 When reviewing a proposed change to tempest/lib code we need to be careful to
-ensure that we don't break backwards compatibility. For patches that change
-existing interfaces we have to be careful to make sure we don't break any
+ensure that we don't break backward compatibility. For patches that change
+existing interfaces, we have to be careful to make sure we don't break any
 external consumers. Some common red flags are:
 
 * a change to an existing API requires a change outside the library directory
@@ -52,7 +52,7 @@
 '''''''
 When adding a new interface to the library we need to at a minimum have unit
 test coverage. A proposed change to add an interface to tempest/lib that
-doesn't have unit tests shouldn't be accepted. Ideally these unit tests will
+doesn't have unit tests shouldn't be accepted. Ideally, these unit tests will
 provide sufficient coverage to ensure a stable interface moving forward.
 
 Current Library APIs
diff --git a/doc/source/microversion_testing.rst b/doc/source/microversion_testing.rst
index 942f969..6dd00d3 100644
--- a/doc/source/microversion_testing.rst
+++ b/doc/source/microversion_testing.rst
@@ -306,10 +306,18 @@
 
   .. _2.6: https://docs.openstack.org/nova/latest/reference/api-microversion-history.html#id5
 
+  * `2.9`_
+
+  .. _2.9: https://docs.openstack.org/nova/latest/reference/api-microversion-history.html#id8
+
   * `2.10`_
 
   .. _2.10: https://docs.openstack.org/nova/latest/reference/api-microversion-history.html#id9
 
+  * `2.19`_
+
+  .. _2.19: https://docs.openstack.org/nova/latest/reference/api-microversion-history.html#id17
+
   * `2.20`_
 
   .. _2.20: https://docs.openstack.org/nova/latest/reference/api-microversion-history.html#id18
@@ -322,6 +330,10 @@
 
   .. _2.25: https://docs.openstack.org/nova/latest/reference/api-microversion-history.html#maximum-in-mitaka
 
+  * `2.26`_
+
+  .. _2.26: https://docs.openstack.org/nova/latest/reference/api-microversion-history.html#id23
+
   * `2.32`_
 
   .. _2.32: https://docs.openstack.org/nova/latest/reference/api-microversion-history.html#id29
@@ -342,9 +354,37 @@
 
   .. _2.48: https://docs.openstack.org/nova/latest/reference/api-microversion-history.html#id43
 
+  * `2.49`_
+
+  .. _2.49: https://docs.openstack.org/nova/latest/reference/api-microversion-history.html#id44
+
+  * `2.53`_
+
+  .. _2.53: https://docs.openstack.org/nova/latest/reference/api-microversion-history.html#maximum-in-pike
+
+  * `2.54`_
+
+  .. _2.54: https://docs.openstack.org/nova/latest/reference/api-microversion-history.html#id49
+
+  * `2.55`_
+
+  .. _2.55: https://docs.openstack.org/nova/latest/reference/api-microversion-history.html#id50
+
+  * `2.57`_
+
+  .. _2.57: https://docs.openstack.org/nova/latest/reference/api-microversion-history.html#id52
+
   * `2.60`_
 
-  .. _2.60: https://docs.openstack.org/nova/latest/reference/api-microversion-history.html#id54
+  .. _2.60: https://docs.openstack.org/nova/latest/reference/api-microversion-history.html#maximum-in-queens
+
+  * `2.61`_
+
+  .. _2.61: https://docs.openstack.org/nova/latest/reference/api-microversion-history.html#id55
+
+  * `2.63`_
+
+  .. _2.63: https://docs.openstack.org/nova/latest/reference/api-microversion-history.html#id57
 
 * Volume
 
diff --git a/doc/source/plugin.rst b/doc/source/plugin.rst
index 6f6621d..9958792 100644
--- a/doc/source/plugin.rst
+++ b/doc/source/plugin.rst
@@ -5,24 +5,24 @@
 =============================
 
 Tempest has an external test plugin interface which enables anyone to integrate
-an external test suite as part of a tempest run. This will let any project
-leverage being run with the rest of the tempest suite while not requiring the
-tests live in the tempest tree.
+an external test suite as part of a Tempest run. This will let any project
+leverage being run with the rest of the Tempest suite while not requiring the
+tests live in the Tempest tree.
 
 Creating a plugin
 =================
 
 Creating a plugin is fairly straightforward and doesn't require much additional
 effort on top of creating a test suite using tempest.lib. One thing to note with
-doing this is that the interfaces exposed by tempest are not considered stable
-(with the exception of configuration variables which ever effort goes into
-ensuring backwards compatibility). You should not need to import anything from
-tempest itself except where explicitly noted.
+doing this is that the interfaces exposed by Tempest are not considered stable
+(with the exception of configuration variables whichever effort goes into
+ensuring backward compatibility). You should not need to import anything from
+Tempest itself except where explicitly noted.
 
 Stable Tempest APIs plugins may use
 -----------------------------------
 
-As noted above, several tempest APIs are acceptable to use from plugins, while
+As noted above, several Tempest APIs are acceptable to use from plugins, while
 others are not. A list of stable APIs available to plugins is provided below:
 
 * tempest.lib.*
@@ -32,7 +32,7 @@
 * tempest.clients
 * tempest.test
 
-If there is an interface from tempest that you need to rely on in your plugin
+If there is an interface from Tempest that you need to rely on in your plugin
 which is not listed above, it likely needs to be migrated to tempest.lib. In
 that situation, file a bug, push a migration patch, etc. to expedite providing
 the interface in a reliable manner.
@@ -62,7 +62,7 @@
 -----------
 
 Once you've created your plugin class you need to add an entry point to your
-project to enable tempest to find the plugin. The entry point must be added
+project to enable Tempest to find the plugin. The entry point must be added
 to the "tempest.test_plugins" namespace.
 
 If you are using pbr this is fairly straightforward, in the setup.cfg just add
@@ -77,9 +77,9 @@
 Standalone Plugin vs In-repo Plugin
 -----------------------------------
 
-Since all that's required for a plugin to be detected by tempest is a valid
+Since all that's required for a plugin to be detected by Tempest is a valid
 setuptools entry point in the proper namespace there is no difference from the
-tempest perspective on either creating a separate python package to
+Tempest perspective on either creating a separate python package to
 house the plugin or adding the code to an existing python project. However,
 there are tradeoffs to consider when deciding which approach to take when
 creating a new plugin.
@@ -91,9 +91,9 @@
 single version of the test code across project release boundaries (see the
 `Branchless Tempest Spec`_ for more details on this). It also greatly
 simplifies the install time story for external users. Instead of having to
-install the right version of a project in the same python namespace as tempest
+install the right version of a project in the same python namespace as Tempest
 they simply need to pip install the plugin in that namespace. It also means
-that users don't have to worry about inadvertently installing a tempest plugin
+that users don't have to worry about inadvertently installing a Tempest plugin
 when they install another package.
 
 .. _Branchless Tempest Spec: http://specs.openstack.org/openstack/qa-specs/specs/tempest/implemented/branchless-tempest.html
@@ -108,9 +108,9 @@
 Plugin Class
 ============
 
-To provide tempest with all the required information it needs to be able to run
-your plugin you need to create a plugin class which tempest will load and call
-to get information when it needs. To simplify creating this tempest provides an
+To provide Tempest with all the required information it needs to be able to run
+your plugin you need to create a plugin class which Tempest will load and call
+to get information when it needs. To simplify creating this Tempest provides an
 abstract class that should be used as the parent for your plugin. To use this
 you would do something like the following:
 
@@ -147,7 +147,7 @@
       services/
         client.py
 
-That will mirror what people expect from tempest. The file
+That will mirror what people expect from Tempest. The file
 
 * **config.py**: contains any plugin specific configuration variables
 * **plugin.py**: contains the plugin class used for the entry point
@@ -156,14 +156,14 @@
 * **services**: where the plugin specific service clients are
 
 Additionally, when you're creating the plugin you likely want to follow all
-of the tempest developer and reviewer documentation to ensure that the tests
-being added in the plugin act and behave like the rest of tempest.
+of the Tempest developer and reviewer documentation to ensure that the tests
+being added in the plugin act and behave like the rest of Tempest.
 
 Dealing with configuration options
 ----------------------------------
 
-Historically Tempest didn't provide external guarantees on its configuration
-options. However, with the introduction of the plugin interface this is no
+Historically, Tempest didn't provide external guarantees on its configuration
+options. However, with the introduction of the plugin interface, this is no
 longer the case. An external plugin can rely on using any configuration option
 coming from Tempest, there will be at least a full deprecation cycle for any
 option before it's removed. However, just the options provided by Tempest
@@ -171,7 +171,7 @@
 configuration options you should use the ``register_opts`` and
 ``get_opt_lists`` methods to pass them to Tempest when the plugin is loaded.
 When adding configuration options the ``register_opts`` method gets passed the
-CONF object from tempest. This enables the plugin to add options to both
+CONF object from Tempest. This enables the plugin to add options to both
 existing sections and also create new configuration sections for new options.
 
 Service Clients
@@ -325,23 +325,23 @@
 
 Tempest will automatically discover any installed plugins when it is run. So by
 just installing the python packages which contain your plugin you'll be using
-them with tempest, nothing else is really required.
+them with Tempest, nothing else is really required.
 
 However, you should take care when installing plugins. By their very nature
-there are no guarantees when running tempest with plugins enabled about the
+there are no guarantees when running Tempest with plugins enabled about the
 quality of the plugin. Additionally, while there is no limitation on running
-with multiple plugins it's worth noting that poorly written plugins might not
+with multiple plugins, it's worth noting that poorly written plugins might not
 properly isolate their tests which could cause unexpected cross interactions
 between plugins.
 
 Notes for using plugins with virtualenvs
 ----------------------------------------
 
-When using a tempest inside a virtualenv (like when running under tox) you have
+When using a Tempest inside a virtualenv (like when running under tox) you have
 to ensure that the package that contains your plugin is either installed in the
 venv too or that you have system site-packages enabled. The virtualenv will
-isolate the tempest install from the rest of your system so just installing the
-plugin package on your system and then running tempest inside a venv will not
+isolate the Tempest install from the rest of your system so just installing the
+plugin package on your system and then running Tempest inside a venv will not
 work.
 
 Tempest also exposes a tox job, all-plugin, which will setup a tox virtualenv
diff --git a/doc/source/stable_branch_support_policy.rst b/doc/source/stable_branch_support_policy.rst
new file mode 100644
index 0000000..87e3ad1
--- /dev/null
+++ b/doc/source/stable_branch_support_policy.rst
@@ -0,0 +1,30 @@
+Stable Branch Support Policy
+============================
+
+Since the `Extended Maintenance policy`_ for stable branches was adopted
+OpenStack projects will keep stable branches around after a "stable" or
+"maintained" period for a phase of indeterminate length called "Extended
+Maintenance". Prior to this resolution Tempest supported all stable branches
+which were supported upstream. This policy does not scale under the new model
+as Tempest would be responsible for gating proposed changes against an ever
+increasing number of branches. Therefore due to resource constraints, Tempest
+will only provide support for branches in the "Maintained" phase from the
+documented `Support Phases`_. When a branch moves from the *Maintained* to the
+*Extended Maintenance* phase, Tempest will tag the removal of support for that
+branch as it has in the past when a branch goes end of life.
+
+The expectation for *Extended Maintenance* phase branches is that they will continue
+running Tempest during that phase of support. Since the REST APIs are stable
+interfaces across release boundaries, branches in these phases should run
+Tempest from master as long as possible. But, because we won't be actively
+testing branches in these phases, it's possible that we'll introduce changes to
+Tempest on master which will break support on *Extended Maintenance* phase
+branches. When this happens the expectation for those branches is to either
+switch to running Tempest from a tag with support for the branch, or blacklist
+a newly introduced test (if that is the cause of the issue). Tempest will not
+be creating stable branches to support *Extended Maintenance* phase branches, as
+the burden is on the *Extended Maintenance* phase branche maintainers, not the Tempest
+project, to support that branch.
+
+.. _Extended Maintenance policy: https://governance.openstack.org/tc/resolutions/20180301-stable-branch-eol.html
+.. _Support Phases: https://docs.openstack.org/project-team-guide/stable-branches.html#maintenance-phases
diff --git a/doc/source/test_removal.rst b/doc/source/test_removal.rst
index ddae6e2..e249bdd 100644
--- a/doc/source/test_removal.rst
+++ b/doc/source/test_removal.rst
@@ -1,21 +1,23 @@
+.. _test-removal:
+
 Tempest Test Removal Procedure
 ==============================
 
-Historically tempest was the only way of doing functional testing and
-integration testing in OpenStack. This was mostly only an artifact of tempest
+Historically, Tempest was the only way of doing functional testing and
+integration testing in OpenStack. This was mostly only an artifact of Tempest
 being the only proven pattern for doing this, not an artifact of a design
-decision. However, moving forward as functional testing is being spun up in
-each individual project we really only want tempest to be the integration test
-suite it was intended to be; testing the high level interactions between
-projects through REST API requests. In this model there are probably existing
-tests that aren't the best fit living in tempest. However, since tempest is
+decision. However, moving forward, as functional testing is being spun up in
+each individual project, we really only want Tempest to be the integration test
+suite it was intended to be: testing the high-level interactions between
+projects through REST API requests. In this model, there are probably existing
+tests that aren't the best fit living in Tempest. However, since Tempest is
 largely still the only gating test suite in this space we can't carelessly rip
 out everything from the tree. This document outlines the procedure which was
 developed to ensure we minimize the risk for removing something of value from
-the tempest tree.
+the Tempest tree.
 
-This procedure might seem overly conservative and slow paced, but this is by
-design to try and ensure we don't remove something that is actually providing
+This procedure might seem overly conservative and slow-paced, but this is by
+design to try to ensure we don't remove something that is actually providing
 value. Having potential duplication between testing is not a big deal
 especially compared to the alternative of removing something which is actually
 providing value and is actively catching bugs, or blocking incorrect patches
@@ -27,24 +29,24 @@
 3 prong rule for removal
 ^^^^^^^^^^^^^^^^^^^^^^^^
 
-In the proposal etherpad we'll be looking for answers to 3 questions
+In the proposal etherpad we'll be looking for answers to 3 questions:
 
 #. The tests proposed for removal must have equiv. coverage in a different
    project's test suite (whether this is another gating test project, or an in
    tree functional test suite). For API tests preferably the other project will
-   have a similar source of friction in place to prevent breaking api changes
-   so that we don't regress and let breaking api changes slip through the
+   have a similar source of friction in place to prevent breaking API changes
+   so that we don't regress and let breaking API changes slip through the
    gate.
 #. The test proposed for removal has a failure rate <  0.50% in the gate over
    the past release (the value and interval will likely be adjusted in the
    future)
 
    .. _`prong #3`:
-#. There must not be an external user/consumer of tempest
+#. There must not be an external user/consumer of Tempest
    that depends on the test proposed for removal
 
 The answers to 1 and 2 are easy to verify. For 1 just provide a link to the new
-test location. If you are linking to the tempest removal patch please also put
+test location. If you are linking to the Tempest removal patch please also put
 a Depends-On in the commit message for the commit which moved the test into
 another repo.
 
@@ -91,32 +93,35 @@
 #. paste the output table with numbers and the mysql command you ran to
    generate it into the etherpad.
 
-Eventually a cli interface will be created to make that a bit more friendly.
+Eventually, a CLI interface will be created to make that a bit more friendly.
 Also a dashboard is in the works so we don't need to manually run the command.
 
 The intent of the 2nd prong is to verify that moving the test into a project
-specific testing is preventing bugs (assuming the tempest tests were catching
-issues) from bubbling up a layer into tempest jobs. If we're seeing failure
+specific testing is preventing bugs (assuming the Tempest tests were catching
+issues) from bubbling up a layer into Tempest jobs. If we're seeing failure
 rates above a certain threshold in the gate checks that means the functional
 testing isn't really being effective in catching that bug (and therefore
-blocking it from landing) and having the testing run in tempest still has
+blocking it from landing) and having the testing run in Tempest still has
 value.
 
-However for the 3rd prong verification is a bit more subjective. The original
+However, for the 3rd prong verification is a bit more subjective. The original
 intent of this prong was mostly for refstack/defcore and also for things that
 running on the stable branches. We don't want to remove any tests if that
-would break our api consistency checking between releases, or something that
-defcore/refstack is depending on being in tempest. It's worth pointing out
-that if a test is used in defcore as part of interop testing then it will
-probably have continuing value being in tempest as part of the
+would break our API consistency checking between releases, or something that
+defcore/refstack is depending on being in Tempest. It's worth pointing out
+that if a test is used in `defcore`_ as part of `interop`_ testing then it will
+probably have continuing value being in Tempest as part of the
 integration/integrated tests in general. This is one area where some overlap
-is expected between testing in projects and tempest, which is not a bad thing.
+is expected between testing in projects and Tempest, which is not a bad thing.
+
+.. _defcore: https://wiki.openstack.org/wiki/Governance/InteropWG
+.. _interop: https://www.openstack.org/brand/interop
 
 Discussing the 3rd prong
 """"""""""""""""""""""""
 
 There are 2 approaches to addressing the 3rd prong. Either it can be raised
-during a qa meeting during the tempest discussion. Please put it on the agenda
+during a QA meeting during the Tempest discussion. Please put it on the agenda
 well ahead of the scheduled meeting. Since the meeting time will be well known
 ahead of time anyone who depends on the tests will have ample time beforehand
 to outline any concerns on the before the meeting. To give ample time for
@@ -133,19 +138,19 @@
 Exceptions to this procedure
 ----------------------------
 
-For the most part all tempest test removals have to go through this procedure
+For the most part, all Tempest test removals have to go through this procedure
 there are a couple of exceptions though:
 
-#. The class of testing has been decided to be outside the scope of tempest.
+#. The class of testing has been decided to be outside the scope of Tempest.
 #. A revert for a patch which added a broken test, or testing which didn't
    actually run in the gate (basically any revert for something which
    shouldn't have been added)
 #. Tests that would become out of scope as a consequence of an API change,
    as described in `API Compatibility`_.
    Such tests cannot live in Tempest because of the branchless nature of
-   Tempest. Such test must still honor `prong #3`_.
+   Tempest. Such tests must still honor `prong #3`_.
 
-For the first exception type the only types of testing in tree which have been
+For the first exception type, the only types of testing in the tree which have been
 declared out of scope at this point are:
 
 * The CLI tests (which should be completely removed at this point)
@@ -154,14 +159,14 @@
 * XML API Tests (which should be completely removed at this point)
 * EC2 API/boto tests (which should be completely removed at this point)
 
-For tests that fit into this category the only criteria for removal is that
+For tests that fit into this category, the only criteria for removal is that
 there is equivalent testing elsewhere.
 
 Tempest Scope
 ^^^^^^^^^^^^^
 
-Starting in the liberty cycle tempest has defined a set of projects which
-are defined as in scope for direct testing in tempest. As of today that list
+Starting in the liberty cycle Tempest, has defined a set of projects which
+are defined as in scope for direct testing in Tempest. As of today that list
 is:
 
 * Keystone
@@ -171,23 +176,23 @@
 * Neutron
 * Swift
 
-anything that lives in tempest which doesn't test one of these projects can be
+Anything that lives in Tempest which doesn't test one of these projects can be
 removed assuming there is equivalent testing elsewhere. Preferably using the
 `tempest plugin mechanism`_
-to maintain continuity after migrating the tests out of tempest.
+to maintain continuity after migrating the tests out of Tempest.
 
 .. _tempest plugin mechanism: https://docs.openstack.org/tempest/latest/plugin.html
 
 API Compatibility
 """""""""""""""""
 
-If an API introduces a non-discoverable, backward incompatible change, and
-such change is not backported to all versions supported by Tempest, tests for
+If an API introduces a non-discoverable, backward-incompatible change, and
+such a change is not backported to all versions supported by Tempest, tests for
 that API cannot live in Tempest anymore.
 This is because tests would not be able to know or control which API response
 to expect, and thus would not be able to enforce a specific behavior.
 
-If a test exists in Tempest that would meet this criteria as consequence of a
-change, the test must be removed according to the procedure discussed into
+If a test exists in Tempest that would meet these criteria as a consequence of a
+change, the test must be removed according to the procedure discussed in
 this document. The API change should not be merged until all conditions
 required for test removal can be met.
diff --git a/doc/source/write_tests.rst b/doc/source/write_tests.rst
index fff2405..0a29b7b 100644
--- a/doc/source/write_tests.rst
+++ b/doc/source/write_tests.rst
@@ -4,7 +4,7 @@
 ##########################
 
 This guide serves as a starting point for developers working on writing new
-Tempest tests. At a high level tests in Tempest are just tests that conform to
+Tempest tests. At a high level, tests in Tempest are just tests that conform to
 the standard python `unit test`_ framework. But there are several aspects of
 that are unique to Tempest and its role as an integration test suite running
 against a real cloud.
diff --git a/playbooks/devstack-tempest.yaml b/playbooks/devstack-tempest.yaml
index a684984..01155a8 100644
--- a/playbooks/devstack-tempest.yaml
+++ b/playbooks/devstack-tempest.yaml
@@ -3,7 +3,7 @@
 # avoid zuul retrying on legitimate failures.
 - hosts: all
   roles:
-    - run-devstack
+    - orchestrate-devstack
 
 # We run tests only on one node, regardless how many nodes are in the system
 - hosts: tempest
diff --git a/playbooks/post-tempest.yaml b/playbooks/post-tempest.yaml
index 4dde2c9..6e0bcad 100644
--- a/playbooks/post-tempest.yaml
+++ b/playbooks/post-tempest.yaml
@@ -1,4 +1,4 @@
-- hosts: all
+- hosts: tempest
   become: true
   roles:
     - role: fetch-subunit-output
diff --git a/releasenotes/notes/16/16.0.0-add-content-type-without-spaces-b2c9b91b257814f3.yaml b/releasenotes/notes/16/16.0.0-add-content-type-without-spaces-b2c9b91b257814f3.yaml
index fc061bc..9ae46fd 100644
--- a/releasenotes/notes/16/16.0.0-add-content-type-without-spaces-b2c9b91b257814f3.yaml
+++ b/releasenotes/notes/16/16.0.0-add-content-type-without-spaces-b2c9b91b257814f3.yaml
@@ -6,4 +6,4 @@
     The lack of these additional content-type will cause defcore test
     to fail for OpenStack public cloud which uses tomcat module in the
     api gateway. The additions are ``application/json;charset=utf-8``,
-    ``text/html;charset=utf-8``,``text/plain;charset=utf-8``
\ No newline at end of file
+    ``text/html;charset=utf-8``, ``text/plain;charset=utf-8``
diff --git a/releasenotes/notes/16/16.0.0-add-tempest-run-combine-option-e94c1049ba8985d5.yaml b/releasenotes/notes/16/16.0.0-add-tempest-run-combine-option-e94c1049ba8985d5.yaml
index 73900ca..e9c3694 100644
--- a/releasenotes/notes/16/16.0.0-add-tempest-run-combine-option-e94c1049ba8985d5.yaml
+++ b/releasenotes/notes/16/16.0.0-add-tempest-run-combine-option-e94c1049ba8985d5.yaml
@@ -1,6 +1,6 @@
 ---
 features:
   - |
-    Adds a new cli option to tempest run, --combine, which is used to indicate
-    you want the subunit stream output combined with the previous run's in
-    the testr repository
+    Adds a new cli option to tempest run, ``--combine``, which is used
+    to indicate you want the subunit stream output combined with the
+    previous run's in the testr repository
diff --git a/releasenotes/notes/16/16.0.0-remove-deprecated-allow_port_security_disabled-option-d0ffaeb2e7817707.yaml b/releasenotes/notes/16/16.0.0-remove-deprecated-allow_port_security_disabled-option-d0ffaeb2e7817707.yaml
index 9d7102f..5b4a96d 100644
--- a/releasenotes/notes/16/16.0.0-remove-deprecated-allow_port_security_disabled-option-d0ffaeb2e7817707.yaml
+++ b/releasenotes/notes/16/16.0.0-remove-deprecated-allow_port_security_disabled-option-d0ffaeb2e7817707.yaml
@@ -1,5 +1,5 @@
 ---
 upgrade:
   - |
-    The deprecated config option 'allow_port_security_disabled' from compute_feature_enabled
-    group has been removed.
+    The deprecated config option ``allow_port_security_disabled`` from
+    ``compute_feature_enabled`` group has been removed.
diff --git a/releasenotes/notes/16/16.0.0-remove-deprecated-compute-validation-config-options-part-2-5cd17b6e0e6cb8a3.yaml b/releasenotes/notes/16/16.0.0-remove-deprecated-compute-validation-config-options-part-2-5cd17b6e0e6cb8a3.yaml
index b4e4dd1..c8b0ca8 100644
--- a/releasenotes/notes/16/16.0.0-remove-deprecated-compute-validation-config-options-part-2-5cd17b6e0e6cb8a3.yaml
+++ b/releasenotes/notes/16/16.0.0-remove-deprecated-compute-validation-config-options-part-2-5cd17b6e0e6cb8a3.yaml
@@ -8,4 +8,4 @@
     - ``compute.ssh_user`` (available as ``validation.image_ssh_user``)
     - ``scenario.ssh_user`` (available as ``validation.image_ssh_user``)
     - ``compute.network_for_ssh`` (available as ``validation.network_for_ssh``)
-    - ``compute.ping_timeout `` (available as ``validation.ping_timeout``)
+    - ``compute.ping_timeout`` (available as ``validation.ping_timeout``)
diff --git a/releasenotes/notes/add-extra-apis-to-volume-v3-services-client-bf9b235cf5a611fe.yaml b/releasenotes/notes/add-extra-apis-to-volume-v3-services-client-bf9b235cf5a611fe.yaml
new file mode 100644
index 0000000..03d0ae8
--- /dev/null
+++ b/releasenotes/notes/add-extra-apis-to-volume-v3-services-client-bf9b235cf5a611fe.yaml
@@ -0,0 +1,6 @@
+---
+features:
+  - |
+    Add ``enable_service``, ``disable_service`` , ``disable_log_reason``,
+    ``freeze_host`` and ``thaw_host`` API endpoints to volume v3
+    ``services_client``.
diff --git a/releasenotes/notes/add-load-list-cmd-35a4a2e6ea0a36fd.yaml b/releasenotes/notes/add-load-list-cmd-35a4a2e6ea0a36fd.yaml
index 403bbad..145e7dd 100644
--- a/releasenotes/notes/add-load-list-cmd-35a4a2e6ea0a36fd.yaml
+++ b/releasenotes/notes/add-load-list-cmd-35a4a2e6ea0a36fd.yaml
@@ -1,7 +1,7 @@
 ---
 features:
   - |
-    Adds a new cli option to tempest run, --load-list <list-file>
+    Adds a new cli option to tempest run, ``--load-list <list-file>``
     to specify target tests to run from a list-file. The list-file
-    supports the output format of the tempest run --list-tests
+    supports the output format of the tempest run ``--list-tests``
     command.
diff --git a/releasenotes/notes/add-port-profile-config-option-2610b2fa67027960.yaml b/releasenotes/notes/add-port-profile-config-option-2610b2fa67027960.yaml
index b54ee8b..19d47d1 100644
--- a/releasenotes/notes/add-port-profile-config-option-2610b2fa67027960.yaml
+++ b/releasenotes/notes/add-port-profile-config-option-2610b2fa67027960.yaml
@@ -1,11 +1,9 @@
 ---
-prelude: >
-    When using OVS HW offload feature we need to create
-    Neutron port with a certain capability. This is done
-    by creating Neutron port with binding profile. To be
-    able to test this we need profile capability support
-    in Tempest as well.
 features:
   - A new config option 'port_profile' is added to the section
     'network' to specify capabilities of the port.
-    By default this is set to {}.
+    By default this is set to {}. When using OVS HW offload
+    feature we need to create Neutron port with a certain
+    capability. This is done by creating Neutron port with
+    binding profile. To be able to test this we need profile
+    capability support in Tempest as well.
diff --git a/releasenotes/notes/add-save-state-option-5ea67858cbaca969.yaml b/releasenotes/notes/add-save-state-option-5ea67858cbaca969.yaml
index 8fdf4f0..abd2610 100644
--- a/releasenotes/notes/add-save-state-option-5ea67858cbaca969.yaml
+++ b/releasenotes/notes/add-save-state-option-5ea67858cbaca969.yaml
@@ -1,4 +1,5 @@
 ---
 features:
   - |
-    Add --save-state option to allow saving state of cloud before tempest run.
+    Add ``--save-state`` option to allow saving state of cloud before
+    tempest run.
diff --git a/releasenotes/notes/add-show-quota-details-api-to-network-quotas-client-3fffd302cc5d335f.yaml b/releasenotes/notes/add-show-quota-details-api-to-network-quotas-client-3fffd302cc5d335f.yaml
index 406e282..6c44ba0 100644
--- a/releasenotes/notes/add-show-quota-details-api-to-network-quotas-client-3fffd302cc5d335f.yaml
+++ b/releasenotes/notes/add-show-quota-details-api-to-network-quotas-client-3fffd302cc5d335f.yaml
@@ -3,5 +3,5 @@
   - |
     Add extension API show quota details to network quotas_client library.
     This feature enables the possibility to show a quota set for a specified
-    project that includes the quota’s used, limit and reserved counts for per
-    resource
+    project that includes the quota's used, limit and reserved counts per
+    resource.
diff --git a/releasenotes/notes/add-update-flavor--api-to-flavors-client-a859542fe54aab7c.yaml b/releasenotes/notes/add-update-flavor--api-to-flavors-client-a859542fe54aab7c.yaml
new file mode 100644
index 0000000..222a99f
--- /dev/null
+++ b/releasenotes/notes/add-update-flavor--api-to-flavors-client-a859542fe54aab7c.yaml
@@ -0,0 +1,4 @@
+---
+features:
+  - |
+    Add update flavor API to compute flavors_client library.
diff --git a/releasenotes/notes/cli-tests-v3fixes-fb38189cefd64213.yaml b/releasenotes/notes/cli-tests-v3fixes-fb38189cefd64213.yaml
index e3443c8..2a0a86c 100644
--- a/releasenotes/notes/cli-tests-v3fixes-fb38189cefd64213.yaml
+++ b/releasenotes/notes/cli-tests-v3fixes-fb38189cefd64213.yaml
@@ -2,8 +2,8 @@
 other:
   - |
     The CLIClient class, when it calls a command line client, uses
-    --os-project-name instead of --os-tenant-name for the project, and
-    passes --os-identity-api-version (default empty).
+    ``--os-project-name`` instead of ``--os-tenant-name`` for the
+    project, and passes ``--os-identity-api-version`` (default empty).
     All CLI clients still available in supported releases of OpenStack
-    which are wrapped by the cmd_with_auth() method support those
+    which are wrapped by the ``cmd_with_auth()`` method support those
     switches.
diff --git a/releasenotes/notes/omit_X-Subject-Token_from_log-1bf5fef88c80334b.yaml b/releasenotes/notes/omit_X-Subject-Token_from_log-1bf5fef88c80334b.yaml
new file mode 100644
index 0000000..51c8f79
--- /dev/null
+++ b/releasenotes/notes/omit_X-Subject-Token_from_log-1bf5fef88c80334b.yaml
@@ -0,0 +1,7 @@
+---
+security:
+  - |
+    The x-subject-token of a response header is ommitted from log,
+    but clients specify the same token on a request header on
+    Keystone API and that was not omitted. In this release,
+    that has been omitted for a security reason.
diff --git a/releasenotes/notes/remove-allow_tenant_isolation-option-03f0d998eb498d44.yaml b/releasenotes/notes/remove-allow_tenant_isolation-option-03f0d998eb498d44.yaml
new file mode 100644
index 0000000..4f4516b
--- /dev/null
+++ b/releasenotes/notes/remove-allow_tenant_isolation-option-03f0d998eb498d44.yaml
@@ -0,0 +1,6 @@
+---
+upgrade:
+  - |
+    Remove deprecated config option ``allow_tenant_isolation`` from
+    ``auth`` and ``compute`` groups. Use ``use_dynamic_credentials`` directly
+    instead of the removed option.
diff --git a/releasenotes/notes/tempest-lib-compute-update-service-6019d2dcfe4a1c5d.yaml b/releasenotes/notes/tempest-lib-compute-update-service-6019d2dcfe4a1c5d.yaml
new file mode 100644
index 0000000..d67cdb8
--- /dev/null
+++ b/releasenotes/notes/tempest-lib-compute-update-service-6019d2dcfe4a1c5d.yaml
@@ -0,0 +1,11 @@
+---
+features:
+  - |
+    The ``update_service`` API is added to the ``services_client`` compute
+    library. This API is introduced in microversion 2.53 and supersedes
+    the following APIs:
+
+    * ``PUT /os-services/disable`` (``disable_service``)
+    * ``PUT /os-services/disable-log-reason`` (``disable_log_reason``)
+    * ``PUT /os-services/enable`` (``enable_service``)
+    * ``PUT /os-services/force-down`` (``update_forced_down``)
diff --git a/releasenotes/notes/tempest-run-fix-updates-564b41706decbba1.yaml b/releasenotes/notes/tempest-run-fix-updates-564b41706decbba1.yaml
index 265853d..0f9a0f6 100644
--- a/releasenotes/notes/tempest-run-fix-updates-564b41706decbba1.yaml
+++ b/releasenotes/notes/tempest-run-fix-updates-564b41706decbba1.yaml
@@ -1,8 +1,8 @@
 ---
 features:
   - |
-    Adds a new CLI arg in tempest run, --black-regex, which is a regex to
-    exclude the tests that match it.
+    Adds a new CLI arg in tempest run, ``--black-regex``, which is a
+    regex to exclude the tests that match it.
 fixes:
   - |
     Fixes tempest run CLI args mutually exclusive behavior which should not
diff --git a/releasenotes/notes/tempest-workspace-delete-directory-feature-74d6d157a5a05561.yaml b/releasenotes/notes/tempest-workspace-delete-directory-feature-74d6d157a5a05561.yaml
index ec21098..c69ed50 100644
--- a/releasenotes/notes/tempest-workspace-delete-directory-feature-74d6d157a5a05561.yaml
+++ b/releasenotes/notes/tempest-workspace-delete-directory-feature-74d6d157a5a05561.yaml
@@ -1,5 +1,5 @@
 ---
 features:
   - |
-    Added tempest workspace remove --name <workspace_name> --rmdir
+    Added tempest workspace remove ``--name <workspace_name> --rmdir``
     feature to delete the workspace directory as well as entry.
diff --git a/releasenotes/notes/volume-service-testing-default-to-v3-endpoints-20b86895a590925d.yaml b/releasenotes/notes/volume-service-testing-default-to-v3-endpoints-20b86895a590925d.yaml
new file mode 100644
index 0000000..ea69293
--- /dev/null
+++ b/releasenotes/notes/volume-service-testing-default-to-v3-endpoints-20b86895a590925d.yaml
@@ -0,0 +1,8 @@
+---
+upgrade:
+  - |
+    The volume config option ``catalog_type`` default is changed to
+    ``volumev3`` which is v3 API endpoint configured in devstack.
+    With this change Tempest will be testing v3 API as default.
+    User who want to test v2 API can still test by configuring the
+    ``catalog_type`` to v2 endpoint.
diff --git a/releasenotes/notes/volume-v3-service-clients-a863a6336af56cca.yaml b/releasenotes/notes/volume-v3-service-clients-a863a6336af56cca.yaml
new file mode 100644
index 0000000..b572a34
--- /dev/null
+++ b/releasenotes/notes/volume-v3-service-clients-a863a6336af56cca.yaml
@@ -0,0 +1,12 @@
+---
+features:
+  - |
+    Adds volume service clients for v3 APIs. As v3 base API should be
+    identical to v2 APIs, we just copy all existing v2 service client
+    for v3 API.
+deprecations:
+  - |
+    Deprecates the volume service clients for v2 APIs. Volume v2 APIs
+    are deprecated in all supported stable branches, so it's time
+    to deprecate the tempest service clients for v2 APIs and remove in future
+    release.
diff --git a/tempest/README.rst b/tempest/README.rst
index 62821de..a5f4a92 100644
--- a/tempest/README.rst
+++ b/tempest/README.rst
@@ -12,12 +12,12 @@
 and guidelines. Below is the overview of the Tempest respository structure
 to make this clear.
 
- .. code-block:: console
+.. code-block:: console
 
-    tempest/
-       api/ - API tests
-       scenario/ - complex scenario tests
-       tests/ - unit tests for Tempest internals
+   tempest/
+      api/ - API tests
+      scenario/ - complex scenario tests
+      tests/ - unit tests for Tempest internals
 
 Each of these directories contains different types of tests. What
 belongs in each directory, the rules and examples for good tests, are
diff --git a/tempest/api/compute/admin/test_flavors_microversions.py b/tempest/api/compute/admin/test_flavors_microversions.py
new file mode 100644
index 0000000..31b9217
--- /dev/null
+++ b/tempest/api/compute/admin/test_flavors_microversions.py
@@ -0,0 +1,51 @@
+# Copyright 2018 NEC Corporation.
+# All Rights Reserved.
+#
+#    Licensed under the Apache License, Version 2.0 (the "License"); you may
+#    not use this file except in compliance with the License. You may obtain
+#    a copy of the License at
+#
+#         http://www.apache.org/licenses/LICENSE-2.0
+#
+#    Unless required by applicable law or agreed to in writing, software
+#    distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+#    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+#    License for the specific language governing permissions and limitations
+#    under the License.
+from tempest.api.compute import base
+from tempest.lib.common.utils import data_utils
+from tempest.lib import decorators
+
+
+class FlavorsV255TestJSON(base.BaseV2ComputeAdminTest):
+    min_microversion = '2.55'
+    max_microversion = 'latest'
+
+    # NOTE(gmann): This class tests the flavors APIs
+    # response schema for the 2.55 microversion.
+
+    @decorators.idempotent_id('61976b25-488d-41dc-9dcb-cb9693a7b075')
+    def test_crud_flavor(self):
+        flavor_id = data_utils.rand_int_id(start=1000)
+        # Checking create API response schema
+        new_flavor_id = self.create_flavor(ram=512,
+                                           vcpus=1,
+                                           disk=10,
+                                           id=flavor_id)['id']
+        # Checking show API response schema
+        self.flavors_client.show_flavor(new_flavor_id)
+        # Checking update API response schema
+        self.admin_flavors_client.update_flavor(new_flavor_id,
+                                                description='new')
+        # Checking list details API response schema
+        self.flavors_client.list_flavors(detail=True)
+        # Checking list API response schema
+        self.flavors_client.list_flavors()
+
+
+class FlavorsV261TestJSON(FlavorsV255TestJSON):
+    min_microversion = '2.61'
+    max_microversion = 'latest'
+
+    # NOTE(gmann): This class tests the flavors APIs
+    # response schema for the 2.61 microversion.
diff --git a/tempest/api/compute/admin/test_floating_ips_bulk.py b/tempest/api/compute/admin/test_floating_ips_bulk.py
index 72d09ed..2d7e1a7 100644
--- a/tempest/api/compute/admin/test_floating_ips_bulk.py
+++ b/tempest/api/compute/admin/test_floating_ips_bulk.py
@@ -25,6 +25,8 @@
 CONF = config.CONF
 
 
+# TODO(stephenfin): Remove this test class once the nova queens branch goes
+# into extended maintenance mode.
 class FloatingIPsBulkAdminTestJSON(base.BaseV2ComputeAdminTest):
     """Tests Floating IPs Bulk APIs that require admin privileges.
 
@@ -32,6 +34,7 @@
     content/ext-os-floating-ips-bulk.html
     """
     max_microversion = '2.35'
+    depends_on_nova_network = True
 
     @classmethod
     def setup_clients(cls):
diff --git a/tempest/api/compute/admin/test_live_migration.py b/tempest/api/compute/admin/test_live_migration.py
index 2398cf1..8350f7c 100644
--- a/tempest/api/compute/admin/test_live_migration.py
+++ b/tempest/api/compute/admin/test_live_migration.py
@@ -66,7 +66,8 @@
         kwargs = dict()
         block_migration = getattr(self, 'block_migration', None)
         if self.block_migration is None:
-            kwargs['disk_over_commit'] = False
+            if self.is_requested_microversion_compatible('2.24'):
+                kwargs['disk_over_commit'] = False
             block_migration = (CONF.compute_feature_enabled.
                                block_migration_for_live_migration and
                                not volume_backed)
@@ -147,6 +148,7 @@
     @testtools.skipIf(not CONF.compute_feature_enabled.
                       block_migrate_cinder_iscsi,
                       'Block Live migration not configured for iSCSI')
+    @utils.services('volume')
     def test_iscsi_volume(self):
         server = self.create_test_server(wait_until="ACTIVE")
         server_id = server['id']
diff --git a/tempest/api/compute/admin/test_live_migration_negative.py b/tempest/api/compute/admin/test_live_migration_negative.py
index deabbc2..8327a3b 100644
--- a/tempest/api/compute/admin/test_live_migration_negative.py
+++ b/tempest/api/compute/admin/test_live_migration_negative.py
@@ -32,9 +32,10 @@
 
     def _migrate_server_to(self, server_id, dest_host):
         bmflm = CONF.compute_feature_enabled.block_migration_for_live_migration
-        self.admin_servers_client.live_migrate_server(
-            server_id, host=dest_host, block_migration=bmflm,
-            disk_over_commit=False)
+        kwargs = dict(host=dest_host, block_migration=bmflm)
+        if self.is_requested_microversion_compatible('2.24'):
+            kwargs['disk_over_commit'] = False
+        self.admin_servers_client.live_migrate_server(server_id, **kwargs)
 
     @decorators.attr(type=['negative'])
     @decorators.idempotent_id('7fb7856e-ae92-44c9-861a-af62d7830bcb')
diff --git a/tempest/api/compute/admin/test_quotas.py b/tempest/api/compute/admin/test_quotas.py
index c2bdf7e..df534bc 100644
--- a/tempest/api/compute/admin/test_quotas.py
+++ b/tempest/api/compute/admin/test_quotas.py
@@ -46,13 +46,19 @@
         # tenant most of them should be skipped if we can't do that
         cls.demo_tenant_id = cls.quotas_client.tenant_id
 
-        cls.default_quota_set = set(('injected_file_content_bytes',
-                                     'metadata_items', 'injected_files',
-                                     'ram', 'floating_ips',
-                                     'fixed_ips', 'key_pairs',
-                                     'injected_file_path_bytes',
-                                     'instances', 'security_group_rules',
-                                     'cores', 'security_groups'))
+        cls.default_quota_set = set(('metadata_items', 'ram', 'key_pairs',
+                                     'instances', 'cores',
+                                     'server_group_members', 'server_groups'))
+        if cls.is_requested_microversion_compatible('2.35'):
+            cls.default_quota_set = \
+                cls.default_quota_set | set(['fixed_ips', 'floating_ips',
+                                             'security_group_rules',
+                                             'security_groups'])
+        if cls.is_requested_microversion_compatible('2.56'):
+            cls.default_quota_set = \
+                cls.default_quota_set | set(['injected_file_content_bytes',
+                                             'injected_file_path_bytes',
+                                             'injected_files'])
 
     @decorators.idempotent_id('3b0a7c8f-cf58-46b8-a60c-715a32a8ba7d')
     def test_get_default_quotas(self):
@@ -69,13 +75,19 @@
         # Admin can update all the resource quota limits for a tenant
         default_quota_set = self.adm_client.show_default_quota_set(
             self.demo_tenant_id)['quota_set']
-        new_quota_set = {'injected_file_content_bytes': 20480,
-                         'metadata_items': 256, 'injected_files': 10,
-                         'ram': 10240, 'floating_ips': 20, 'fixed_ips': 10,
-                         'key_pairs': 200, 'injected_file_path_bytes': 512,
-                         'instances': 20, 'security_group_rules': 20,
-                         'cores': 2, 'security_groups': 20,
-                         'server_groups': 20, 'server_group_members': 20}
+        new_quota_set = {'metadata_items': 256, 'ram': 10240,
+                         'key_pairs': 200, 'instances': 20,
+                         'server_groups': 20,
+                         'server_group_members': 20, 'cores': 2}
+        if self.is_requested_microversion_compatible('2.35'):
+            new_quota_set.update({'fixed_ips': 10, 'floating_ips': 20,
+                                  'security_group_rules': 20,
+                                  'security_groups': 20})
+        if self.is_requested_microversion_compatible('2.56'):
+            new_quota_set.update({'injected_file_content_bytes': 20480,
+                                  'injected_file_path_bytes': 512,
+                                  'injected_files': 10})
+
         # Update limits for all quota resources
         quota_set = self.adm_client.update_quota_set(
             self.demo_tenant_id,
diff --git a/tempest/api/compute/admin/test_quotas_negative.py b/tempest/api/compute/admin/test_quotas_negative.py
index 5ef7ee4..f90ff92 100644
--- a/tempest/api/compute/admin/test_quotas_negative.py
+++ b/tempest/api/compute/admin/test_quotas_negative.py
@@ -22,12 +22,12 @@
 CONF = config.CONF
 
 
-class QuotasAdminNegativeTestJSON(base.BaseV2ComputeAdminTest):
+class QuotasAdminNegativeTestBase(base.BaseV2ComputeAdminTest):
     force_tenant_isolation = True
 
     @classmethod
     def setup_clients(cls):
-        super(QuotasAdminNegativeTestJSON, cls).setup_clients()
+        super(QuotasAdminNegativeTestBase, cls).setup_clients()
         cls.client = cls.os_primary.quotas_client
         cls.adm_client = cls.os_admin.quotas_client
         cls.sg_client = cls.security_groups_client
@@ -35,7 +35,7 @@
 
     @classmethod
     def resource_setup(cls):
-        super(QuotasAdminNegativeTestJSON, cls).resource_setup()
+        super(QuotasAdminNegativeTestBase, cls).resource_setup()
         # NOTE(afazekas): these test cases should always create and use a new
         # tenant most of them should be skipped if we can't do that
         cls.demo_tenant_id = cls.client.tenant_id
@@ -51,6 +51,9 @@
         self.addCleanup(self.adm_client.update_quota_set, self.demo_tenant_id,
                         **{quota_item: default_quota_value})
 
+
+class QuotasAdminNegativeTest(QuotasAdminNegativeTestBase):
+
     @decorators.attr(type=['negative'])
     @decorators.idempotent_id('733abfe8-166e-47bb-8363-23dbd7ff3476')
     def test_update_quota_normal_user(self):
@@ -85,6 +88,10 @@
         self.assertRaises((lib_exc.Forbidden, lib_exc.OverLimit),
                           self.create_test_server)
 
+
+class QuotasSecurityGroupAdminNegativeTest(QuotasAdminNegativeTestBase):
+    max_microversion = '2.35'
+
     @decorators.skip_because(bug="1186354",
                              condition=CONF.service_available.neutron)
     @decorators.attr(type=['negative'])
diff --git a/tempest/api/compute/admin/test_security_group_default_rules.py b/tempest/api/compute/admin/test_security_group_default_rules.py
index f2f3b57..bca6a22 100644
--- a/tempest/api/compute/admin/test_security_group_default_rules.py
+++ b/tempest/api/compute/admin/test_security_group_default_rules.py
@@ -23,6 +23,7 @@
 
 
 class SecurityGroupDefaultRulesTest(base.BaseV2ComputeAdminTest):
+    max_microversion = '2.35'
 
     @classmethod
     # TODO(GMann): Once Bug# 1311500 is fixed, these test can run
diff --git a/tempest/api/compute/admin/test_security_groups.py b/tempest/api/compute/admin/test_security_groups.py
index ff9caa3..f0178aa 100644
--- a/tempest/api/compute/admin/test_security_groups.py
+++ b/tempest/api/compute/admin/test_security_groups.py
@@ -20,6 +20,7 @@
 
 
 class SecurityGroupsTestAdminJSON(base.BaseV2ComputeAdminTest):
+    max_microversion = '2.35'
 
     @classmethod
     def setup_clients(cls):
diff --git a/tempest/api/compute/admin/test_servers.py b/tempest/api/compute/admin/test_servers.py
index 3f06c4e..cdfc44a 100644
--- a/tempest/api/compute/admin/test_servers.py
+++ b/tempest/api/compute/admin/test_servers.py
@@ -16,6 +16,7 @@
 from tempest.common import waiters
 from tempest.lib.common.utils import data_utils
 from tempest.lib import decorators
+from tempest.lib import exceptions as lib_exc
 
 
 class ServersAdminTestJSON(base.BaseV2ComputeAdminTest):
@@ -61,9 +62,13 @@
     @decorators.idempotent_id('d56e9540-73ed-45e0-9b88-98fc419087eb')
     def test_list_servers_detailed_filter_by_invalid_status(self):
         params = {'status': 'invalid_status'}
-        body = self.client.list_servers(detail=True, **params)
-        servers = body['servers']
-        self.assertEmpty(servers)
+        if self.is_requested_microversion_compatible('2.37'):
+            body = self.client.list_servers(detail=True, **params)
+            servers = body['servers']
+            self.assertEmpty(servers)
+        else:
+            self.assertRaises(lib_exc.BadRequest, self.client.list_servers,
+                              detail=True, **params)
 
     @decorators.idempotent_id('51717b38-bdc1-458b-b636-1cf82d99f62f')
     def test_list_servers_by_admin(self):
diff --git a/tempest/api/compute/admin/test_services.py b/tempest/api/compute/admin/test_services.py
index f3eb597..73e191b 100644
--- a/tempest/api/compute/admin/test_services.py
+++ b/tempest/api/compute/admin/test_services.py
@@ -56,15 +56,3 @@
         # sort the lists before comparing, to take out dependency
         # on order.
         self.assertEqual(sorted(s1), sorted(s2))
-
-    @decorators.idempotent_id('39397f6f-37b8-4234-8671-281e44c74025')
-    def test_get_service_by_service_and_host_name(self):
-        services = self.client.list_services()['services']
-        host_name = services[0]['host']
-        binary_name = services[0]['binary']
-
-        services = self.client.list_services(host=host_name,
-                                             binary=binary_name)['services']
-        self.assertEqual(1, len(services))
-        self.assertEqual(host_name, services[0]['host'])
-        self.assertEqual(binary_name, services[0]['binary'])
diff --git a/tempest/api/compute/admin/test_services_negative.py b/tempest/api/compute/admin/test_services_negative.py
index 201670a..d264829 100644
--- a/tempest/api/compute/admin/test_services_negative.py
+++ b/tempest/api/compute/admin/test_services_negative.py
@@ -13,12 +13,14 @@
 #    under the License.
 
 from tempest.api.compute import base
+from tempest.lib.common.utils import data_utils
 from tempest.lib import decorators
 from tempest.lib import exceptions as lib_exc
 
 
 class ServicesAdminNegativeTestJSON(base.BaseV2ComputeAdminTest):
     """Tests Services API. List and Enable/Disable require admin privileges."""
+    max_microversion = '2.52'
 
     @classmethod
     def setup_clients(cls):
@@ -35,7 +37,8 @@
     @decorators.attr(type=['negative'])
     @decorators.idempotent_id('d0884a69-f693-4e79-a9af-232d15643bf7')
     def test_get_service_by_invalid_params(self):
-        # return all services if send the request with invalid parameter
+        # Expect all services to be returned when the request contains invalid
+        # parameters.
         services = self.client.list_services()['services']
         services_xxx = (self.client.list_services(xxx='nova-compute')
                         ['services'])
@@ -58,3 +61,43 @@
         services = self.client.list_services(host='xxx',
                                              binary=binary_name)['services']
         self.assertEmpty(services)
+
+
+class ServicesAdminNegativeV253TestJSON(ServicesAdminNegativeTestJSON):
+    min_microversion = '2.53'
+    max_microversion = 'latest'
+
+    # NOTE(felipemonteiro): This class tests the services APIs response schema
+    # for the 2.53 microversion. Schema testing is done for `list_services`
+    # tests.
+
+    @classmethod
+    def resource_setup(cls):
+        super(ServicesAdminNegativeV253TestJSON, cls).resource_setup()
+        cls.fake_service_id = data_utils.rand_uuid()
+
+    @decorators.attr(type=['negative'])
+    @decorators.idempotent_id('508671aa-c929-4479-bd10-8680d40dd0a6')
+    def test_enable_service_with_invalid_service_id(self):
+        self.assertRaises(lib_exc.NotFound,
+                          self.client.update_service,
+                          service_id=self.fake_service_id,
+                          status='enabled')
+
+    @decorators.attr(type=['negative'])
+    @decorators.idempotent_id('a9eeeade-42b3-419f-87aa-c9342aa068cf')
+    def test_disable_service_with_invalid_service_id(self):
+        self.assertRaises(lib_exc.NotFound,
+                          self.client.update_service,
+                          service_id=self.fake_service_id,
+                          status='disabled')
+
+    @decorators.attr(type=['negative'])
+    @decorators.idempotent_id('f46a9d91-1e85-4b96-8e7a-db7706fa2e9a')
+    def test_disable_log_reason_with_invalid_service_id(self):
+        # disabled_reason requires that status='disabled' be provided.
+        self.assertRaises(lib_exc.NotFound,
+                          self.client.update_service,
+                          service_id=self.fake_service_id,
+                          status='disabled',
+                          disabled_reason='maintenance')
diff --git a/tempest/api/compute/base.py b/tempest/api/compute/base.py
index 975728c..d0c1973 100644
--- a/tempest/api/compute/base.py
+++ b/tempest/api/compute/base.py
@@ -108,6 +108,35 @@
                 raise lib_exc.InvalidConfiguration(
                     'Either api_v1 or api_v2 must be True in '
                     '[image-feature-enabled].')
+        cls._check_depends_on_nova_network()
+
+    @classmethod
+    def _check_depends_on_nova_network(cls):
+        # Since nova-network APIs were removed from Nova in the Rocky release,
+        # determine, based on the max version from the version document, if
+        # the compute API is >Queens and if so, skip tests that rely on
+        # nova-network.
+        if not getattr(cls, 'depends_on_nova_network', False):
+            return
+        versions = cls.versions_client.list_versions()['versions']
+        # Find the v2.1 version which will tell us our max version for the
+        # compute API we're testing against.
+        for version in versions:
+            if version['id'] == 'v2.1':
+                max_version = api_version_request.APIVersionRequest(
+                    version['version'])
+                break
+        else:
+            LOG.warning(
+                'Unable to determine max v2.1 compute API version: %s',
+                versions)
+            return
+
+        # The max compute API version in Queens is 2.60 so we cap
+        # at that version.
+        queens = api_version_request.APIVersionRequest('2.60')
+        if max_version > queens:
+            raise cls.skipException('nova-network is gone')
 
     @classmethod
     def resource_setup(cls):
@@ -501,7 +530,7 @@
             # is already detached.
             pass
 
-    def attach_volume(self, server, volume, device=None):
+    def attach_volume(self, server, volume, device=None, tag=None):
         """Attaches volume to server and waits for 'in-use' volume status.
 
         The volume will be detached when the test tears down.
@@ -510,10 +539,14 @@
         :param volume: The volume to attach.
         :param device: Optional mountpoint for the attached volume. Note that
             this is not guaranteed for all hypervisors and is not recommended.
+        :param tag: Optional device role tag to apply to the volume.
         """
         attach_kwargs = dict(volumeId=volume['id'])
         if device:
             attach_kwargs['device'] = device
+        if tag:
+            attach_kwargs['tag'] = tag
+
         attachment = self.servers_client.attach_volume(
             server['id'], **attach_kwargs)['volumeAttachment']
         # On teardown detach the volume and wait for it to be available. This
diff --git a/tempest/api/compute/keypairs/test_keypairs_negative.py b/tempest/api/compute/keypairs/test_keypairs_negative.py
index f9050a8..81635ca 100644
--- a/tempest/api/compute/keypairs/test_keypairs_negative.py
+++ b/tempest/api/compute/keypairs/test_keypairs_negative.py
@@ -84,6 +84,6 @@
     @decorators.idempotent_id('45fbe5e0-acb5-49aa-837a-ff8d0719db91')
     def test_create_keypair_invalid_name(self):
         # Keypairs with name being an invalid name should not be created
-        k_name = 'key_/.\@:'
+        k_name = r'key_/.\@:'
         self.assertRaises(lib_exc.BadRequest, self.create_keypair,
                           k_name)
diff --git a/tempest/api/compute/security_groups/base.py b/tempest/api/compute/security_groups/base.py
index 54a6da8..49125d1 100644
--- a/tempest/api/compute/security_groups/base.py
+++ b/tempest/api/compute/security_groups/base.py
@@ -22,6 +22,7 @@
 
 
 class BaseSecurityGroupsTest(base.BaseV2ComputeTest):
+    max_microversion = '2.35'
 
     @classmethod
     def skip_checks(cls):
diff --git a/tempest/api/compute/servers/test_device_tagging.py b/tempest/api/compute/servers/test_device_tagging.py
index b0d527c..5d9bf48 100644
--- a/tempest/api/compute/servers/test_device_tagging.py
+++ b/tempest/api/compute/servers/test_device_tagging.py
@@ -19,6 +19,7 @@
 from tempest.api.compute import base
 from tempest.common import utils
 from tempest.common.utils.linux import remote_client
+from tempest.common import waiters
 from tempest import config
 from tempest.lib.common.utils import data_utils
 from tempest.lib.common.utils import test_utils
@@ -31,18 +32,11 @@
 LOG = logging.getLogger(__name__)
 
 
-class DeviceTaggingTest(base.BaseV2ComputeTest):
-
-    min_microversion = '2.32'
-    # NOTE(mriedem): max_version looks odd but it's actually correct. Due to a
-    # bug in the 2.32 microversion, tags on block devices only worked with the
-    # 2.32 microversion specifically. And tags on networks only worked between
-    # 2.32 and 2.36 inclusive; the 2.37 microversion broke tags for networks.
-    max_microversion = '2.32'
+class DeviceTaggingBase(base.BaseV2ComputeTest):
 
     @classmethod
     def skip_checks(cls):
-        super(DeviceTaggingTest, cls).skip_checks()
+        super(DeviceTaggingBase, cls).skip_checks()
         if not CONF.service_available.neutron:
             raise cls.skipException('Neutron is required')
         if not CONF.validation.run_validation:
@@ -54,7 +48,7 @@
 
     @classmethod
     def setup_clients(cls):
-        super(DeviceTaggingTest, cls).setup_clients()
+        super(DeviceTaggingBase, cls).setup_clients()
         cls.networks_client = cls.os_primary.networks_client
         cls.ports_client = cls.os_primary.ports_client
         cls.subnets_client = cls.os_primary.subnets_client
@@ -64,7 +58,57 @@
     def setup_credentials(cls):
         cls.set_network_resources(network=True, subnet=True, router=True,
                                   dhcp=True)
-        super(DeviceTaggingTest, cls).setup_credentials()
+        super(DeviceTaggingBase, cls).setup_credentials()
+
+    def verify_metadata_from_api(self, server, ssh_client, verify_method):
+        md_url = 'http://169.254.169.254/openstack/latest/meta_data.json'
+        LOG.info('Attempting to verify tagged devices in server %s via '
+                 'the metadata service: %s', server['id'], md_url)
+
+        def get_and_verify_metadata():
+            try:
+                ssh_client.exec_command('curl -V')
+            except exceptions.SSHExecCommandFailed:
+                if not CONF.compute_feature_enabled.config_drive:
+                    raise self.skipException('curl not found in guest '
+                                             'and config drive is '
+                                             'disabled')
+                LOG.warning('curl was not found in the guest, device '
+                            'tagging metadata was not checked in the '
+                            'metadata API')
+                return True
+            cmd = 'curl %s' % md_url
+            md_json = ssh_client.exec_command(cmd)
+            return verify_method(md_json)
+        # NOTE(gmann) Keep refreshing the metadata info until the metadata
+        # cache is refreshed. For safer side, we will go with wait loop of
+        # build_interval till build_timeout. verify_method() above will return
+        # True if all metadata verification is done as expected.
+        if not test_utils.call_until_true(get_and_verify_metadata,
+                                          CONF.compute.build_timeout,
+                                          CONF.compute.build_interval):
+            raise exceptions.TimeoutException('Timeout while verifying '
+                                              'metadata on server.')
+
+    def verify_metadata_on_config_drive(self, server, ssh_client,
+                                        verify_method):
+        LOG.info('Attempting to verify tagged devices in server %s via '
+                 'the config drive.', server['id'])
+        ssh_client.mount_config_drive()
+        cmd_md = 'sudo cat /mnt/openstack/latest/meta_data.json'
+        md_json = ssh_client.exec_command(cmd_md)
+        verify_method(md_json)
+        ssh_client.unmount_config_drive()
+
+
+class TaggedBootDevicesTest(DeviceTaggingBase):
+
+    min_microversion = '2.32'
+    # NOTE(mriedem): max_version looks odd but it's actually correct. Due to a
+    # bug in the 2.32 microversion, tags on block devices only worked with the
+    # 2.32 microversion specifically. And tags on networks only worked between
+    # 2.32 and 2.36 inclusive; the 2.37 microversion broke tags for networks.
+    max_microversion = '2.32'
 
     def verify_device_metadata(self, md_json):
         md_dict = json.loads(md_json)
@@ -79,20 +123,24 @@
                 if d['mac'] == self.net_2_200_mac:
                     self.assertEqual(d['tags'], ['net-2-200'])
 
-            # A hypervisor may present multiple paths to a tagged disk, so
-            # there may be duplicated tags in the metadata, use set() to
-            # remove duplicated tags.
-            # Some hypervisors might report devices with no tags as well.
-            found_devices = [d['tags'][0] for d in md_dict['devices']
-                             if d.get('tags')]
+        # A hypervisor may present multiple paths to a tagged disk, so
+        # there may be duplicated tags in the metadata, use set() to
+        # remove duplicated tags.
+        # Some hypervisors might report devices with no tags as well.
+        found_devices = [d['tags'][0] for d in md_dict['devices']
+                         if d.get('tags')]
+        try:
             self.assertEqual(set(found_devices), set(['port-1', 'port-2',
                                                       'net-1', 'net-2-100',
                                                       'net-2-200', 'boot',
                                                       'other']))
+            return True
+        except Exception:
+            return False
 
     @decorators.idempotent_id('a2e65a6c-66f1-4442-aaa8-498c31778d96')
     @utils.services('network', 'volume', 'image')
-    def test_device_tagging(self):
+    def test_tagged_boot_devices(self):
         # Create volumes
         # The create_volume methods waits for the volumes to be available and
         # the base class will clean them up on tearDown.
@@ -134,7 +182,6 @@
         self.addCleanup(self.ports_client.delete_port, self.port2['id'])
 
         # Create server
-        admin_pass = data_utils.rand_password()
         config_drive_enabled = CONF.compute_feature_enabled.config_drive
         validation_resources = self.get_test_validation_resources(
             self.os_primary)
@@ -144,7 +191,6 @@
             wait_until='ACTIVE',
             validation_resources=validation_resources,
             config_drive=config_drive_enabled,
-            adminPass=admin_pass,
             name=data_utils.rand_name('device-tagging-server'),
             networks=[
                 # Validation network for ssh
@@ -209,11 +255,10 @@
         self.addCleanup(self.delete_server, server['id'])
 
         server = self.servers_client.show_server(server['id'])['server']
-        self.ssh_client = remote_client.RemoteClient(
+        ssh_client = remote_client.RemoteClient(
             self.get_server_ip(server, validation_resources),
             CONF.validation.image_ssh_user,
-            admin_pass,
-            validation_resources['keypair']['private_key'],
+            pkey=validation_resources['keypair']['private_key'],
             server=server,
             servers_client=self.servers_client)
 
@@ -233,46 +278,109 @@
         self.assertTrue(self.net_2_100_mac)
         self.assertTrue(self.net_2_200_mac)
 
-        # Verify metadata from metadata service
+        # Verify metadata from metadata API
         if CONF.compute_feature_enabled.metadata_service:
-            md_url = 'http://169.254.169.254/openstack/latest/meta_data.json'
-            LOG.info('Attempting to verify tagged devices in server %s via '
-                     'the metadata service: %s', server['id'], md_url)
-
-            def get_and_verify_metadata():
-                try:
-                    self.ssh_client.exec_command('curl -V')
-                except exceptions.SSHExecCommandFailed:
-                    if not CONF.compute_feature_enabled.config_drive:
-                        raise self.skipException('curl not found in guest '
-                                                 'and config drive is '
-                                                 'disabled')
-                    LOG.warning('curl was not found in the guest, device '
-                                'tagging metadata was not checked in the '
-                                'metadata API')
-                    return True
-                cmd = 'curl %s' % md_url
-                md_json = self.ssh_client.exec_command(cmd)
-                self.verify_device_metadata(md_json)
-                return True
-
-            if not test_utils.call_until_true(get_and_verify_metadata,
-                                              CONF.compute.build_timeout,
-                                              CONF.compute.build_interval):
-                raise exceptions.TimeoutException('Timeout while verifying '
-                                                  'metadata on server.')
+            self.verify_metadata_from_api(server, ssh_client,
+                                          self.verify_device_metadata)
 
         # Verify metadata on config drive
         if CONF.compute_feature_enabled.config_drive:
-            LOG.info('Attempting to verify tagged devices in server %s via '
-                     'the config drive.', server['id'])
-            self.ssh_client.mount_config_drive()
-            cmd_md = 'sudo cat /mnt/openstack/latest/meta_data.json'
-            md_json = self.ssh_client.exec_command(cmd_md)
-            self.verify_device_metadata(md_json)
-            self.ssh_client.unmount_config_drive()
+            self.verify_metadata_on_config_drive(server, ssh_client,
+                                                 self.verify_device_metadata)
 
 
-class DeviceTaggingTestV2_42(DeviceTaggingTest):
+class TaggedBootDevicesTest_v242(TaggedBootDevicesTest):
     min_microversion = '2.42'
     max_microversion = 'latest'
+
+
+class TaggedAttachmentsTest(DeviceTaggingBase):
+
+    min_microversion = '2.49'
+    max_microversion = 'latest'
+
+    @classmethod
+    def skip_checks(cls):
+        super(TaggedAttachmentsTest, cls).skip_checks()
+        if not CONF.compute_feature_enabled.metadata_service:
+            raise cls.skipException('Metadata API must be enabled')
+
+    def verify_device_metadata(self, md_json):
+        md_dict = json.loads(md_json)
+        found_devices = [d['tags'][0] for d in md_dict['devices']
+                         if d.get('tags')]
+        try:
+            self.assertItemsEqual(found_devices, ['nic-tag', 'volume-tag'])
+            return True
+        except Exception:
+            return False
+
+    def verify_empty_devices(self, md_json):
+        md_dict = json.loads(md_json)
+        try:
+            self.assertEmpty(md_dict['devices'])
+            return True
+        except AssertionError:
+            LOG.debug("Related bug 1775947. Devices dict is not empty: %s",
+                      md_dict['devices'])
+            return False
+
+    @decorators.idempotent_id('3e41c782-2a89-4922-a9d2-9a188c4e7c7c')
+    @utils.services('network', 'volume', 'image')
+    def test_tagged_attachment(self):
+        # Create network
+        net = self.networks_client.create_network(
+            name=data_utils.rand_name(
+                'tagged-attachments-test-net'))['network']
+        self.addCleanup(self.networks_client.delete_network, net['id'])
+
+        # Create subnet
+        subnet = self.subnets_client.create_subnet(
+            network_id=net['id'],
+            cidr='10.10.10.0/24',
+            ip_version=4)['subnet']
+        self.addCleanup(self.subnets_client.delete_subnet, subnet['id'])
+
+        # Create volume
+        volume = self.create_volume()
+
+        # Boot test server
+        config_drive_enabled = CONF.compute_feature_enabled.config_drive
+        validation_resources = self.get_test_validation_resources(
+            self.os_primary)
+
+        server = self.create_test_server(
+            validatable=True,
+            validation_resources=validation_resources,
+            config_drive=config_drive_enabled,
+            name=data_utils.rand_name('device-tagging-server'),
+            networks=[{'uuid': self.get_tenant_network()['id']}])
+        self.addCleanup(self.delete_server, server['id'])
+
+        # Attach tagged nic and volume
+        interface = self.interfaces_client.create_interface(
+            server['id'], net_id=net['id'],
+            tag='nic-tag')['interfaceAttachment']
+        self.attach_volume(server, volume, tag='volume-tag')
+
+        ssh_client = remote_client.RemoteClient(
+            self.get_server_ip(server, validation_resources),
+            CONF.validation.image_ssh_user,
+            pkey=validation_resources['keypair']['private_key'],
+            server=server,
+            servers_client=self.servers_client)
+
+        self.verify_metadata_from_api(server, ssh_client,
+                                      self.verify_device_metadata)
+
+        # Detach tagged nic and volume
+        self.servers_client.detach_volume(server['id'], volume['id'])
+        waiters.wait_for_volume_resource_status(self.volumes_client,
+                                                volume['id'], 'available')
+        self.interfaces_client.delete_interface(server['id'],
+                                                interface['port_id'])
+        waiters.wait_for_interface_detach(self.interfaces_client,
+                                          server['id'],
+                                          interface['port_id'])
+        self.verify_metadata_from_api(server, ssh_client,
+                                      self.verify_empty_devices)
diff --git a/tempest/api/compute/servers/test_list_server_filters.py b/tempest/api/compute/servers/test_list_server_filters.py
index 14aecfd..3dffd01 100644
--- a/tempest/api/compute/servers/test_list_server_filters.py
+++ b/tempest/api/compute/servers/test_list_server_filters.py
@@ -227,7 +227,7 @@
     @decorators.idempotent_id('24a89b0c-0d55-4a28-847f-45075f19b27b')
     def test_list_servers_filtered_by_name_regex(self):
         # list of regex that should match s1, s2 and s3
-        regexes = ['^.*\-instance\-[0-9]+$', '^.*\-instance\-.*$']
+        regexes = [r'^.*\-instance\-[0-9]+$', r'^.*\-instance\-.*$']
         for regex in regexes:
             params = {'name': regex}
             body = self.client.list_servers(**params)
diff --git a/tempest/api/compute/servers/test_list_servers_negative.py b/tempest/api/compute/servers/test_list_servers_negative.py
index 393e68f..18a78f0 100644
--- a/tempest/api/compute/servers/test_list_servers_negative.py
+++ b/tempest/api/compute/servers/test_list_servers_negative.py
@@ -79,10 +79,16 @@
     @decorators.attr(type=['negative'])
     @decorators.idempotent_id('fcdf192d-0f74-4d89-911f-1ec002b822c4')
     def test_list_servers_status_non_existing(self):
-        # Return an empty list when invalid status is specified
-        body = self.client.list_servers(status='non_existing_status')
-        servers = body['servers']
-        self.assertEmpty(servers)
+        # When invalid status is specified, up to microversion 2.37,
+        # an empty list is returnd, and starting from microversion 2.38,
+        # a 400 error is returned in that case.
+        if self.is_requested_microversion_compatible('2.37'):
+            body = self.client.list_servers(status='non_existing_status')
+            servers = body['servers']
+            self.assertEmpty(servers)
+        else:
+            self.assertRaises(lib_exc.BadRequest, self.client.list_servers,
+                              status='non_existing_status')
 
     @decorators.attr(type=['negative'])
     @decorators.idempotent_id('d47c17fb-eebd-4287-8e95-f20a7e627b18')
diff --git a/tempest/api/compute/servers/test_server_actions.py b/tempest/api/compute/servers/test_server_actions.py
index 41654a1..961b2b7 100644
--- a/tempest/api/compute/servers/test_server_actions.py
+++ b/tempest/api/compute/servers/test_server_actions.py
@@ -369,6 +369,42 @@
         server = self.client.show_server(self.server_id)['server']
         self.assertEqual(self.flavor_ref, server['flavor']['id'])
 
+    @decorators.idempotent_id('fbbf075f-a812-4022-bc5c-ccb8047eef12')
+    @decorators.related_bug('1737599')
+    @testtools.skipUnless(CONF.compute_feature_enabled.resize,
+                          'Resize not available.')
+    @utils.services('volume')
+    def test_resize_server_revert_with_volume_attached(self):
+        # Tests attaching a volume to a server instance and then resizing
+        # the instance. Once the instance is resized, revert the resize which
+        # should move the instance and volume attachment back to the original
+        # compute host.
+
+        # Create a blank volume and attach it to the server created in setUp.
+        volume = self.create_volume()
+        server = self.client.show_server(self.server_id)['server']
+        self.attach_volume(server, volume)
+        # Now resize the server with the blank volume attached.
+        self.client.resize_server(self.server_id, self.flavor_ref_alt)
+        # Explicitly delete the server to get a new one for later
+        # tests. Avoids resize down race issues.
+        self.addCleanup(self.delete_server, self.server_id)
+        waiters.wait_for_server_status(
+            self.client, self.server_id, 'VERIFY_RESIZE')
+        # Now revert the resize which should move the instance and it's volume
+        # attachment back to the original source compute host.
+        self.client.revert_resize_server(self.server_id)
+        waiters.wait_for_server_status(self.client, self.server_id, 'ACTIVE')
+        # Make sure everything still looks OK.
+        server = self.client.show_server(self.server_id)['server']
+        # The flavor id is not returned in the server response after
+        # microversion 2.46 so handle that gracefully.
+        if server['flavor'].get('id'):
+            self.assertEqual(self.flavor_ref, server['flavor']['id'])
+        attached_volumes = server['os-extended-volumes:volumes_attached']
+        self.assertEqual(1, len(attached_volumes))
+        self.assertEqual(volume['id'], attached_volumes[0]['id'])
+
     @decorators.idempotent_id('b963d4f1-94b3-4c40-9e97-7b583f46e470')
     @testtools.skipUnless(CONF.compute_feature_enabled.snapshot,
                           'Snapshotting not available, backup not possible.')
@@ -393,7 +429,7 @@
         resp = self.client.create_backup(self.server_id,
                                          backup_type='daily',
                                          rotation=2,
-                                         name=backup1).response
+                                         name=backup1)
         oldest_backup_exist = True
 
         # the oldest one should be deleted automatically in this test
@@ -409,10 +445,10 @@
                                 "deleted during rotation.", oldest_backup)
 
         if api_version_utils.compare_version_header_to_response(
-                "OpenStack-API-Version", "compute 2.45", resp, "lt"):
+                "OpenStack-API-Version", "compute 2.45", resp.response, "lt"):
             image1_id = resp['image_id']
         else:
-            image1_id = data_utils.parse_image_id(resp['location'])
+            image1_id = data_utils.parse_image_id(resp.response['location'])
         self.addCleanup(_clean_oldest_backup, image1_id)
         waiters.wait_for_image_status(glance_client,
                                       image1_id, 'active')
@@ -422,12 +458,12 @@
         resp = self.client.create_backup(self.server_id,
                                          backup_type='daily',
                                          rotation=2,
-                                         name=backup2).response
+                                         name=backup2)
         if api_version_utils.compare_version_header_to_response(
-                "OpenStack-API-Version", "compute 2.45", resp, "lt"):
+                "OpenStack-API-Version", "compute 2.45", resp.response, "lt"):
             image2_id = resp['image_id']
         else:
-            image2_id = data_utils.parse_image_id(resp['location'])
+            image2_id = data_utils.parse_image_id(resp.response['location'])
         self.addCleanup(glance_client.delete_image, image2_id)
         waiters.wait_for_image_status(glance_client,
                                       image2_id, 'active')
@@ -465,12 +501,12 @@
         resp = self.client.create_backup(self.server_id,
                                          backup_type='daily',
                                          rotation=2,
-                                         name=backup3).response
+                                         name=backup3)
         if api_version_utils.compare_version_header_to_response(
-                "OpenStack-API-Version", "compute 2.45", resp, "lt"):
+                "OpenStack-API-Version", "compute 2.45", resp.response, "lt"):
             image3_id = resp['image_id']
         else:
-            image3_id = data_utils.parse_image_id(resp['location'])
+            image3_id = data_utils.parse_image_id(resp.response['location'])
         self.addCleanup(glance_client.delete_image, image3_id)
         # the first back up should be deleted
         waiters.wait_for_server_status(self.client, self.server_id, 'ACTIVE')
@@ -491,10 +527,10 @@
 
     def _get_output(self):
         output = self.client.get_console_output(
-            self.server_id, length=10)['output']
+            self.server_id, length=3)['output']
         self.assertTrue(output, "Console output was empty.")
         lines = len(output.split('\n'))
-        self.assertEqual(lines, 10)
+        self.assertEqual(lines, 3)
 
     @decorators.idempotent_id('4b8867e6-fffa-4d54-b1d1-6fdda57be2f3')
     @testtools.skipUnless(CONF.compute_feature_enabled.console_output,
@@ -525,8 +561,8 @@
 
             # NOTE: This test tries to get full length console log, and the
             # length should be bigger than the one of test_get_console_output.
-            self.assertGreater(lines, 10, "Cannot get enough console log "
-                                          "length. (lines: %s)" % lines)
+            self.assertGreater(lines, 3, "Cannot get enough console log "
+                                         "length. (lines: %s)" % lines)
 
         self.wait_for(_check_full_length_console_log)
 
@@ -603,6 +639,20 @@
         waiters.wait_for_server_status(self.client, self.server_id, 'ACTIVE')
         glance_client.wait_for_resource_deletion(images[0]['id'])
 
+    @decorators.idempotent_id('8cf9f450-a871-42cf-9bef-77eba189c0b0')
+    @decorators.related_bug('1745529')
+    @testtools.skipUnless(CONF.compute_feature_enabled.shelve,
+                          'Shelve is not available.')
+    @testtools.skipUnless(CONF.compute_feature_enabled.pause,
+                          'Pause is not available.')
+    def test_shelve_paused_server(self):
+        server = self.create_test_server(wait_until='ACTIVE')
+        self.client.pause_server(server['id'])
+        waiters.wait_for_server_status(self.client, server['id'], 'PAUSED')
+        # Check if Shelve operation is successful on paused server.
+        compute.shelve_server(self.client, server['id'],
+                              force_shelve_offload=True)
+
     @decorators.idempotent_id('af8eafd4-38a7-4a4b-bdbc-75145a580560')
     def test_stop_start_server(self):
         self.client.stop_server(self.server_id)
diff --git a/tempest/api/compute/servers/test_servers.py b/tempest/api/compute/servers/test_servers.py
index 2904976..56d973e 100644
--- a/tempest/api/compute/servers/test_servers.py
+++ b/tempest/api/compute/servers/test_servers.py
@@ -184,8 +184,59 @@
     min_microversion = '2.47'
     max_microversion = 'latest'
 
+    # NOTE(gmann): This test tests the server APIs response schema
+    # Along with 2.47 microversion schema this test class tests the
+    # other microversions 2.9, 2.19 and 2.26 server APIs response schema
+    # also. 2.47 APIs schema are on top of 2.9->2.19->2.26 schema so
+    # below tests cover all of the schema.
+
     @decorators.idempotent_id('88b0bdb2-494c-11e7-a919-92ebcb67fe33')
     def test_show_server(self):
         server = self.create_test_server()
         # All fields will be checked by API schema
         self.servers_client.show_server(server['id'])
+
+    @decorators.idempotent_id('8de397c2-57d0-4b90-aa30-e5d668f21a8b')
+    def test_update_rebuild_list_server(self):
+        server = self.create_test_server()
+        # Checking update API response schema
+        self.servers_client.update_server(server['id'])
+        waiters.wait_for_server_status(self.servers_client, server['id'],
+                                       'ACTIVE')
+        # Checking rebuild API response schema
+        self.servers_client.rebuild_server(server['id'], self.image_ref_alt)
+        waiters.wait_for_server_status(self.servers_client,
+                                       server['id'], 'ACTIVE')
+        # Checking list details API response schema
+        self.servers_client.list_servers(detail=True)
+
+
+class ServerShowV263Test(base.BaseV2ComputeTest):
+    min_microversion = '2.63'
+    max_microversion = 'latest'
+
+    @decorators.idempotent_id('71b8e3d5-11d2-494f-b917-b094a4afed3c')
+    def test_show_update_rebuild_list_server(self):
+        trusted_certs = ['test-cert-1', 'test-cert-2']
+        server = self.create_test_server(
+            trusted_image_certificates=trusted_certs,
+            wait_until='ACTIVE')
+
+        # Check show API response schema
+        self.servers_client.show_server(server['id'])['server']
+
+        # Check update API response schema
+        self.servers_client.update_server(server['id'])
+        waiters.wait_for_server_status(self.servers_client,
+                                       server['id'], 'ACTIVE')
+
+        # Check rebuild API response schema
+        self.servers_client.rebuild_server(server['id'], self.image_ref_alt)
+        waiters.wait_for_server_status(self.servers_client,
+                                       server['id'], 'ACTIVE')
+
+        # Check list details API response schema
+        params = {'trusted_image_certificates': trusted_certs}
+        servers = self.servers_client.list_servers(
+            detail=True, **params)['servers']
+        self.assertNotEmpty(servers)
diff --git a/tempest/api/compute/servers/test_servers_microversions.py b/tempest/api/compute/servers/test_servers_microversions.py
new file mode 100644
index 0000000..2434884
--- /dev/null
+++ b/tempest/api/compute/servers/test_servers_microversions.py
@@ -0,0 +1,66 @@
+# Copyright 2018 NEC Corporation.
+# All Rights Reserved.
+#
+#    Licensed under the Apache License, Version 2.0 (the "License"); you may
+#    not use this file except in compliance with the License. You may obtain
+#    a copy of the License at
+#
+#         http://www.apache.org/licenses/LICENSE-2.0
+#
+#    Unless required by applicable law or agreed to in writing, software
+#    distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+#    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+#    License for the specific language governing permissions and limitations
+#    under the License.
+
+from tempest.api.compute import base
+from tempest.common import waiters
+from tempest.lib.common.utils import data_utils
+from tempest.lib import decorators
+
+# NOTE(gmann): This file is to write the tests which mainly
+# tests newly added microversion schema related to servers APIs.
+# As per (https://docs.openstack.org/tempest/latest/microversion_testing.
+# html#tempest-scope-for-microversion-testing),
+# we need to fill the API response schema gaps which gets modified
+# during microversion change. To cover the testing of such schema
+# we need to have operation schema test which just test
+# the microversion schemas.
+# If you are adding server APIs microversion schema file without
+# their integration tests, you can add tests to cover those schema
+# in this file.
+
+
+class ServerShowV254Test(base.BaseV2ComputeTest):
+    min_microversion = '2.54'
+    max_microversion = 'latest'
+
+    @decorators.idempotent_id('09170a98-4940-4637-add7-1a35121f1a5a')
+    def test_rebuild_server(self):
+        server = self.create_test_server(wait_until='ACTIVE')
+        keypair_name = data_utils.rand_name(
+            self.__class__.__name__ + '-keypair')
+        kwargs = {'name': keypair_name}
+        self.keypairs_client.create_keypair(**kwargs)
+        self.addCleanup(self.keypairs_client.delete_keypair,
+                        keypair_name)
+        # Checking rebuild API response schema
+        self.servers_client.rebuild_server(server['id'], self.image_ref_alt,
+                                           key_name=keypair_name)
+        waiters.wait_for_server_status(self.servers_client,
+                                       server['id'], 'ACTIVE')
+
+
+class ServerShowV257Test(base.BaseV2ComputeTest):
+    min_microversion = '2.57'
+    max_microversion = 'latest'
+
+    @decorators.idempotent_id('803df848-080a-4261-8f11-b020cd9b6f60')
+    def test_rebuild_server(self):
+        server = self.create_test_server(wait_until='ACTIVE')
+        user_data = "ZWNobyAiaGVsbG8gd29ybGQi"
+        # Checking rebuild API response schema
+        self.servers_client.rebuild_server(server['id'], self.image_ref_alt,
+                                           user_data=user_data)
+        waiters.wait_for_server_status(self.servers_client,
+                                       server['id'], 'ACTIVE')
diff --git a/tempest/api/compute/servers/test_virtual_interfaces.py b/tempest/api/compute/servers/test_virtual_interfaces.py
index 90f04ff..f810ec5 100644
--- a/tempest/api/compute/servers/test_virtual_interfaces.py
+++ b/tempest/api/compute/servers/test_virtual_interfaces.py
@@ -25,7 +25,12 @@
 CONF = config.CONF
 
 
+# TODO(mriedem): Remove this test class once the nova queens branch goes into
+# extended maintenance mode.
 class VirtualInterfacesTestJSON(base.BaseV2ComputeTest):
+    max_microversion = '2.43'
+
+    depends_on_nova_network = True
 
     @classmethod
     def setup_credentials(cls):
@@ -50,8 +55,6 @@
         # for a given server_id
 
         if CONF.service_available.neutron:
-            # TODO(mriedem): After a microversion implements the API for
-            # neutron, a 400 should be a failure for nova-network and neutron.
             with testtools.ExpectedException(exceptions.BadRequest):
                 self.client.list_virtual_interfaces(self.server['id'])
         else:
diff --git a/tempest/api/compute/servers/test_virtual_interfaces_negative.py b/tempest/api/compute/servers/test_virtual_interfaces_negative.py
index c4e2400..f6e8bc9 100644
--- a/tempest/api/compute/servers/test_virtual_interfaces_negative.py
+++ b/tempest/api/compute/servers/test_virtual_interfaces_negative.py
@@ -20,7 +20,12 @@
 from tempest.lib import exceptions as lib_exc
 
 
+# TODO(mriedem): Remove this test class once the nova queens branch goes into
+# extended maintenance mode.
 class VirtualInterfacesNegativeTestJSON(base.BaseV2ComputeTest):
+    max_microversion = '2.43'
+
+    depends_on_nova_network = True
 
     @classmethod
     def setup_credentials(cls):
diff --git a/tempest/api/compute/test_quotas.py b/tempest/api/compute/test_quotas.py
index 7cf90ae..a62492d 100644
--- a/tempest/api/compute/test_quotas.py
+++ b/tempest/api/compute/test_quotas.py
@@ -43,14 +43,19 @@
         super(QuotasTestJSON, cls).resource_setup()
         cls.tenant_id = cls.client.tenant_id
         cls.user_id = cls.client.user_id
-        cls.default_quota_set = set(('injected_file_content_bytes',
-                                     'metadata_items', 'injected_files',
-                                     'ram', 'floating_ips',
-                                     'fixed_ips', 'key_pairs',
-                                     'injected_file_path_bytes',
-                                     'instances', 'security_group_rules',
-                                     'cores', 'security_groups',
+        cls.default_quota_set = set(('metadata_items', 'ram', 'key_pairs',
+                                     'instances', 'cores',
                                      'server_group_members', 'server_groups'))
+        if cls.is_requested_microversion_compatible('2.35'):
+            cls.default_quota_set = \
+                cls.default_quota_set | set(['fixed_ips', 'floating_ips',
+                                             'security_group_rules',
+                                             'security_groups'])
+        if cls.is_requested_microversion_compatible('2.56'):
+            cls.default_quota_set = \
+                cls.default_quota_set | set(['injected_file_content_bytes',
+                                             'injected_file_path_bytes',
+                                             'injected_files'])
 
     @decorators.idempotent_id('f1ef0a97-dbbb-4cca-adc5-c9fbc4f76107')
     def test_get_quotas(self):
diff --git a/tempest/api/compute/volumes/test_attach_volume_negative.py b/tempest/api/compute/volumes/test_attach_volume_negative.py
index 7a74869..8618148 100644
--- a/tempest/api/compute/volumes/test_attach_volume_negative.py
+++ b/tempest/api/compute/volumes/test_attach_volume_negative.py
@@ -56,3 +56,16 @@
 
         self.assertRaises(lib_exc.BadRequest,
                           self.attach_volume, server, volume)
+
+    @decorators.attr(type=['negative'])
+    @decorators.idempotent_id('ee37a796-2afb-11e7-bc0f-fa163e65f5ce')
+    def test_attach_attached_volume_to_different_server(self):
+        server1 = self.create_test_server(wait_until='ACTIVE')
+        volume = self.create_volume()
+
+        self.attach_volume(server1, volume)
+
+        # Create server2 and attach in-use volume
+        server2 = self.create_test_server(wait_until='ACTIVE')
+        self.assertRaises(lib_exc.BadRequest,
+                          self.attach_volume, server2, volume)
diff --git a/tempest/api/identity/admin/v2/test_tenants.py b/tempest/api/identity/admin/v2/test_tenants.py
index 0f955bf..cda721c 100644
--- a/tempest/api/identity/admin/v2/test_tenants.py
+++ b/tempest/api/identity/admin/v2/test_tenants.py
@@ -59,11 +59,9 @@
         # Create a tenant that is enabled
         tenant = self.setup_test_tenant(enabled=True)
         tenant_id = tenant['id']
-        en1 = tenant['enabled']
-        self.assertTrue(en1, 'Enable should be True in response')
+        self.assertTrue(tenant['enabled'], 'Enable should be True in response')
         body = self.tenants_client.show_tenant(tenant_id)['tenant']
-        en2 = body['enabled']
-        self.assertTrue(en2, 'Enable should be True in lookup')
+        self.assertTrue(body['enabled'], 'Enable should be True in lookup')
         self.tenants_client.delete_tenant(tenant_id)
 
     @decorators.idempotent_id('3be22093-b30f-499d-b772-38340e5e16fb')
@@ -71,12 +69,10 @@
         # Create a tenant that is not enabled
         tenant = self.setup_test_tenant(enabled=False)
         tenant_id = tenant['id']
-        en1 = tenant['enabled']
-        self.assertEqual('false', str(en1).lower(),
+        self.assertFalse(tenant['enabled'],
                          'Enable should be False in response')
         body = self.tenants_client.show_tenant(tenant_id)['tenant']
-        en2 = body['enabled']
-        self.assertEqual('false', str(en2).lower(),
+        self.assertFalse(body['enabled'],
                          'Enable should be False in lookup')
         self.tenants_client.delete_tenant(tenant_id)
 
@@ -143,7 +139,7 @@
         resp3_en = body['enabled']
 
         self.assertNotEqual(resp1_en, resp3_en)
-        self.assertEqual('false', str(resp1_en).lower())
+        self.assertFalse(tenant['enabled'])
         self.assertEqual(resp2_en, resp3_en)
 
         self.tenants_client.delete_tenant(t_id)
diff --git a/tempest/api/identity/admin/v3/test_domains.py b/tempest/api/identity/admin/v3/test_domains.py
index 97a1f36..72b6be4 100644
--- a/tempest/api/identity/admin/v3/test_domains.py
+++ b/tempest/api/identity/admin/v3/test_domains.py
@@ -121,11 +121,7 @@
         # Create a domain with a user and a group in it
         domain = self.setup_test_domain()
         user = self.create_test_user(domain_id=domain['id'])
-        group = self.groups_client.create_group(
-            name=data_utils.rand_name('group'),
-            domain_id=domain['id'])['group']
-        self.addCleanup(test_utils.call_and_ignore_notfound_exc,
-                        self.groups_client.delete_group, group['id'])
+        group = self.setup_test_group(domain_id=domain['id'])
         # Delete the domain
         self.delete_domain(domain['id'])
         # Check the domain, its users and groups are gone
diff --git a/tempest/api/identity/admin/v3/test_endpoints.py b/tempest/api/identity/admin/v3/test_endpoints.py
index 874aaa4..2cd8906 100644
--- a/tempest/api/identity/admin/v3/test_endpoints.py
+++ b/tempest/api/identity/admin/v3/test_endpoints.py
@@ -20,6 +20,10 @@
 
 
 class EndPointsTestJSON(base.BaseIdentityV3AdminTest):
+    # NOTE: force_tenant_isolation is true in the base class by default but
+    # overridden to false here to allow test execution for clouds using the
+    # pre-provisioned credentials provider.
+    force_tenant_isolation = False
 
     @classmethod
     def setup_clients(cls):
diff --git a/tempest/api/identity/admin/v3/test_endpoints_negative.py b/tempest/api/identity/admin/v3/test_endpoints_negative.py
index d54e222..4c3eb1c 100644
--- a/tempest/api/identity/admin/v3/test_endpoints_negative.py
+++ b/tempest/api/identity/admin/v3/test_endpoints_negative.py
@@ -1,4 +1,3 @@
-
 # Copyright 2013 IBM Corp.
 # All Rights Reserved.
 #
@@ -21,6 +20,10 @@
 
 
 class EndpointsNegativeTestJSON(base.BaseIdentityV3AdminTest):
+    # NOTE: force_tenant_isolation is true in the base class by default but
+    # overridden to false here to allow test execution for clouds using the
+    # pre-provisioned credentials provider.
+    force_tenant_isolation = False
 
     @classmethod
     def setup_clients(cls):
diff --git a/tempest/api/identity/admin/v3/test_groups.py b/tempest/api/identity/admin/v3/test_groups.py
index 507810b..37ce266 100644
--- a/tempest/api/identity/admin/v3/test_groups.py
+++ b/tempest/api/identity/admin/v3/test_groups.py
@@ -30,50 +30,46 @@
 
     @decorators.idempotent_id('2e80343b-6c81-4ac3-88c7-452f3e9d5129')
     def test_group_create_update_get(self):
+        # Verify group creation works.
         name = data_utils.rand_name('Group')
         description = data_utils.rand_name('Description')
-        group = self.groups_client.create_group(
-            name=name, domain_id=self.domain['id'],
-            description=description)['group']
-        self.addCleanup(self.groups_client.delete_group, group['id'])
+        group = self.setup_test_group(name=name, domain_id=self.domain['id'],
+                                      description=description)
         self.assertEqual(group['name'], name)
         self.assertEqual(group['description'], description)
+        self.assertEqual(self.domain['id'], group['domain_id'])
 
-        new_name = data_utils.rand_name('UpdateGroup')
-        new_desc = data_utils.rand_name('UpdateDescription')
+        # Verify updating name and description works.
+        first_name_update = data_utils.rand_name('UpdateGroup')
+        first_desc_update = data_utils.rand_name('UpdateDescription')
         updated_group = self.groups_client.update_group(
-            group['id'], name=new_name, description=new_desc)['group']
-        self.assertEqual(updated_group['name'], new_name)
-        self.assertEqual(updated_group['description'], new_desc)
+            group['id'], name=first_name_update,
+            description=first_desc_update)['group']
+        self.assertEqual(updated_group['name'], first_name_update)
+        self.assertEqual(updated_group['description'], first_desc_update)
 
+        # Verify that the updated values are reflected after performing show.
         new_group = self.groups_client.show_group(group['id'])['group']
         self.assertEqual(group['id'], new_group['id'])
-        self.assertEqual(new_name, new_group['name'])
-        self.assertEqual(new_desc, new_group['description'])
+        self.assertEqual(first_name_update, new_group['name'])
+        self.assertEqual(first_desc_update, new_group['description'])
 
-    @decorators.idempotent_id('b66eb441-b08a-4a6d-81ab-fef71baeb26c')
-    def test_group_update_with_few_fields(self):
-        name = data_utils.rand_name('Group')
-        old_description = data_utils.rand_name('Description')
-        group = self.groups_client.create_group(
-            name=name, domain_id=self.domain['id'],
-            description=old_description)['group']
-        self.addCleanup(self.groups_client.delete_group, group['id'])
-
-        new_name = data_utils.rand_name('UpdateGroup')
+        # Verify that updating a single field for a group (name) leaves the
+        # other fields (description, domain_id) unchanged.
+        second_name_update = data_utils.rand_name(
+            self.__class__.__name__ + 'UpdateGroup')
         updated_group = self.groups_client.update_group(
-            group['id'], name=new_name)['group']
-        self.assertEqual(new_name, updated_group['name'])
-        # Verify that 'description' is not being updated or deleted.
-        self.assertEqual(old_description, updated_group['description'])
+            group['id'], name=second_name_update)['group']
+        self.assertEqual(second_name_update, updated_group['name'])
+        # Verify that 'description' and 'domain_id' were not updated or
+        # deleted.
+        self.assertEqual(first_desc_update, updated_group['description'])
+        self.assertEqual(self.domain['id'], updated_group['domain_id'])
 
     @decorators.attr(type='smoke')
     @decorators.idempotent_id('1598521a-2f36-4606-8df9-30772bd51339')
     def test_group_users_add_list_delete(self):
-        name = data_utils.rand_name('Group')
-        group = self.groups_client.create_group(
-            name=name, domain_id=self.domain['id'])['group']
-        self.addCleanup(self.groups_client.delete_group, group['id'])
+        group = self.setup_test_group(domain_id=self.domain['id'])
         # add user into group
         users = []
         for _ in range(3):
@@ -100,11 +96,8 @@
         # create two groups, and add user into them
         groups = []
         for _ in range(2):
-            name = data_utils.rand_name('Group')
-            group = self.groups_client.create_group(
-                name=name, domain_id=self.domain['id'])['group']
+            group = self.setup_test_group(domain_id=self.domain['id'])
             groups.append(group)
-            self.addCleanup(self.groups_client.delete_group, group['id'])
             self.groups_client.add_group_user(group['id'], user['id'])
         # list groups which user belongs to
         user_groups = self.users_client.list_user_groups(user['id'])['groups']
@@ -118,12 +111,7 @@
         group_ids = list()
         fetched_ids = list()
         for _ in range(3):
-            name = data_utils.rand_name('Group')
-            description = data_utils.rand_name('Description')
-            group = self.groups_client.create_group(
-                name=name, domain_id=self.domain['id'],
-                description=description)['group']
-            self.addCleanup(self.groups_client.delete_group, group['id'])
+            group = self.setup_test_group(domain_id=self.domain['id'])
             group_ids.append(group['id'])
         # List and Verify Groups
         # When domain specific drivers are enabled the operations
diff --git a/tempest/api/identity/admin/v3/test_projects.py b/tempest/api/identity/admin/v3/test_projects.py
index ac23067..bc94a8e 100644
--- a/tempest/api/identity/admin/v3/test_projects.py
+++ b/tempest/api/identity/admin/v3/test_projects.py
@@ -101,22 +101,19 @@
         # Create a project that is enabled
         project = self.setup_test_project(enabled=True)
         project_id = project['id']
-        en1 = project['enabled']
-        self.assertTrue(en1, 'Enable should be True in response')
+        self.assertTrue(project['enabled'],
+                        'Enable should be True in response')
         body = self.projects_client.show_project(project_id)['project']
-        en2 = body['enabled']
-        self.assertTrue(en2, 'Enable should be True in lookup')
+        self.assertTrue(body['enabled'], 'Enable should be True in lookup')
 
     @decorators.idempotent_id('78f96a9c-e0e0-4ee6-a3ba-fbf6dfd03207')
     def test_project_create_not_enabled(self):
         # Create a project that is not enabled
         project = self.setup_test_project(enabled=False)
-        en1 = project['enabled']
-        self.assertEqual('false', str(en1).lower(),
+        self.assertFalse(project['enabled'],
                          'Enable should be False in response')
         body = self.projects_client.show_project(project['id'])['project']
-        en2 = body['enabled']
-        self.assertEqual('false', str(en2).lower(),
+        self.assertFalse(body['enabled'],
                          'Enable should be False in lookup')
 
     @decorators.idempotent_id('f608f368-048c-496b-ad63-d286c26dab6b')
@@ -178,7 +175,7 @@
         resp3_en = body['enabled']
 
         self.assertNotEqual(resp1_en, resp3_en)
-        self.assertEqual('false', str(resp1_en).lower())
+        self.assertFalse(project['enabled'])
         self.assertEqual(resp2_en, resp3_en)
 
     @decorators.idempotent_id('59398d4a-5dc5-4f86-9a4c-c26cc804d6c6')
diff --git a/tempest/api/identity/admin/v3/test_roles.py b/tempest/api/identity/admin/v3/test_roles.py
index 69cac33..62ced19 100644
--- a/tempest/api/identity/admin/v3/test_roles.py
+++ b/tempest/api/identity/admin/v3/test_roles.py
@@ -384,12 +384,23 @@
 
         rules = self.roles_client.list_all_role_inference_rules()[
             'role_inferences']
+
+        # NOTE(jaosorior): With the work related to the define-default-roles
+        # blueprint, we now have 'admin', 'member' and 'reader' by default. So
+        # we filter every other implied role to only take into account the ones
+        # relates to this test.
+        relevant_roles = (self.roles[0]['id'], self.roles[1]['id'],
+                          self.roles[2]['id'], self.role['id'])
+
+        def is_implied_role_relevant(rule):
+            return any(r for r in rule['implies'] if r['id'] in relevant_roles)
+
+        relevant_rules = filter(is_implied_role_relevant, rules)
         # Sort the rules by the number of inferences, since there should be 1
         # inference between "roles[2]" and "role" and 2 inferences for
         # "roles[0]": between "roles[1]" and "roles[2]".
-        sorted_rules = sorted(rules, key=lambda r: len(r['implies']))
+        sorted_rules = sorted(relevant_rules, key=lambda r: len(r['implies']))
 
-        # Check that 2 sets of rules are returned.
         self.assertEqual(2, len(sorted_rules))
         # Check that only 1 inference rule exists between "roles[2]" and "role"
         self.assertEqual(1, len(sorted_rules[0]['implies']))
diff --git a/tempest/api/identity/admin/v3/test_tokens.py b/tempest/api/identity/admin/v3/test_tokens.py
index 0845407..8ae43d6 100644
--- a/tempest/api/identity/admin/v3/test_tokens.py
+++ b/tempest/api/identity/admin/v3/test_tokens.py
@@ -19,7 +19,6 @@
 from tempest import config
 from tempest.lib.common.utils import data_utils
 from tempest.lib import decorators
-from tempest.lib import exceptions as lib_exc
 
 CONF = config.CONF
 
@@ -28,30 +27,6 @@
 
     credentials = ['primary', 'admin', 'alt']
 
-    @decorators.idempotent_id('0f9f5a5f-d5cd-4a86-8a5b-c5ded151f212')
-    def test_tokens(self):
-        # Valid user's token is authenticated
-        # Create a User
-        u_name = data_utils.rand_name('user')
-        u_desc = '%s-description' % u_name
-        u_password = data_utils.rand_password()
-        user = self.create_test_user(
-            name=u_name, description=u_desc, password=u_password)
-        # Perform Authentication
-        resp = self.token.auth(user_id=user['id'],
-                               password=u_password).response
-        subject_token = resp['x-subject-token']
-        self.client.check_token_existence(subject_token)
-        # Perform GET Token
-        token_details = self.client.show_token(subject_token)['token']
-        self.assertEqual(resp['x-subject-token'], subject_token)
-        self.assertEqual(token_details['user']['id'], user['id'])
-        self.assertEqual(token_details['user']['name'], u_name)
-        # Perform Delete Token
-        self.client.delete_token(subject_token)
-        self.assertRaises(lib_exc.NotFound, self.client.check_token_existence,
-                          subject_token)
-
     @decorators.idempotent_id('565fa210-1da1-4563-999b-f7b5b67cf112')
     def test_rescope_token(self):
         """Rescope a token.
@@ -201,10 +176,7 @@
             role_id = self.setup_test_role()['id']
 
             # Create a group.
-            group_name = data_utils.rand_name('Group')
-            group_id = self.groups_client.create_group(
-                name=group_name, domain_id=domain_id)['group']['id']
-            self.addCleanup(self.groups_client.delete_group, group_id)
+            group_id = self.setup_test_group(domain_id=domain_id)['id']
 
             # Add the alt user to the group.
             self.groups_client.add_group_user(group_id, alt_user_id)
diff --git a/tempest/api/identity/base.py b/tempest/api/identity/base.py
index 68f2c07..282343c 100644
--- a/tempest/api/identity/base.py
+++ b/tempest/api/identity/base.py
@@ -292,6 +292,20 @@
             self.delete_domain, domain['id'])
         return domain
 
+    def setup_test_group(self, **kwargs):
+        """Set up a test group."""
+        if 'name' not in kwargs:
+            kwargs['name'] = data_utils.rand_name(
+                self.__class__.__name__ + '_test_project')
+        if 'description' not in kwargs:
+            kwargs['description'] = data_utils.rand_name(
+                self.__class__.__name__ + '_test_description')
+        group = self.groups_client.create_group(**kwargs)['group']
+        self.addCleanup(
+            test_utils.call_and_ignore_notfound_exc,
+            self.groups_client.delete_group, group['id'])
+        return group
+
 
 class BaseApplicationCredentialsV3Test(BaseIdentityV3Test):
 
diff --git a/tempest/api/identity/v2/test_users.py b/tempest/api/identity/v2/test_users.py
index 9c77fff..158dfb3 100644
--- a/tempest/api/identity/v2/test_users.py
+++ b/tempest/api/identity/v2/test_users.py
@@ -84,7 +84,7 @@
         new_pass = data_utils.rand_password()
         user_id = self.creds.user_id
 
-        # to change password back. important for allow_tenant_isolation = false
+        # to change password back. important for use_dynamic_credentials=false
         self.addCleanup(self._restore_password, user_id, old_pass, new_pass)
 
         # user updates own password
diff --git a/tempest/api/identity/v3/test_tokens.py b/tempest/api/identity/v3/test_tokens.py
index 4c72d82..f13aa10 100644
--- a/tempest/api/identity/v3/test_tokens.py
+++ b/tempest/api/identity/v3/test_tokens.py
@@ -91,3 +91,28 @@
             self.assertIsNotNone(subject_name, 'Expected user name in token.')
 
         self.assertEqual(resp['methods'][0], 'password')
+
+    @decorators.idempotent_id('0f9f5a5f-d5cd-4a86-8a5b-c5ded151f212')
+    def test_token_auth_creation_existence_deletion(self):
+        # Tests basic token auth functionality in a way that is compatible with
+        # pre-provisioned credentials. The default user is used for token
+        # authentication.
+
+        # Valid user's token is authenticated
+        user = self.os_primary.credentials
+        # Perform Authentication
+        resp = self.non_admin_token.auth(
+            user_id=user.user_id, password=user.password).response
+        subject_token = resp['x-subject-token']
+        self.non_admin_client.check_token_existence(subject_token)
+        # Perform GET Token
+        token_details = self.non_admin_client.show_token(
+            subject_token)['token']
+        self.assertEqual(resp['x-subject-token'], subject_token)
+        self.assertEqual(token_details['user']['id'], user.user_id)
+        self.assertEqual(token_details['user']['name'], user.username)
+        # Perform Delete Token
+        self.non_admin_client.delete_token(subject_token)
+        self.assertRaises(lib_exc.NotFound,
+                          self.non_admin_client.check_token_existence,
+                          subject_token)
diff --git a/tempest/api/identity/v3/test_users.py b/tempest/api/identity/v3/test_users.py
index 1f099df..6d6baca 100644
--- a/tempest/api/identity/v3/test_users.py
+++ b/tempest/api/identity/v3/test_users.py
@@ -82,7 +82,7 @@
         old_token = self.non_admin_client.token
         new_pass = data_utils.rand_password()
 
-        # to change password back. important for allow_tenant_isolation = false
+        # to change password back. important for use_dynamic_credentials=false
         self.addCleanup(self._restore_password, old_pass, new_pass)
 
         # user updates own password
diff --git a/tempest/api/image/v2/test_images.py b/tempest/api/image/v2/test_images.py
index ce5bd3e..aa57daf 100644
--- a/tempest/api/image/v2/test_images.py
+++ b/tempest/api/image/v2/test_images.py
@@ -71,8 +71,12 @@
         self.assertEqual(1024, body.get('size'))
 
         # Now try get image file
+        # NOTE: This Glance API returns different status codes for image
+        # condition. In this non-empty data case, Glance should return 200,
+        # so here should check the status code.
         body = self.client.show_image_file(image['id'])
         self.assertEqual(file_content, body.data)
+        self.assertEqual(200, body.response.status)
 
     @decorators.attr(type='smoke')
     @decorators.idempotent_id('f848bb94-1c6e-45a4-8726-39e3a5b23535')
@@ -111,6 +115,13 @@
                                   visibility='private')
         self.assertEqual('queued', image['status'])
 
+        # NOTE: This Glance API returns different status codes for image
+        # condition. In this empty data case, Glance should return 204,
+        # so here should check the status code.
+        image_file = self.client.show_image_file(image['id'])
+        self.assertEqual(0, len(image_file.data))
+        self.assertEqual(204, image_file.response.status)
+
         # Now try uploading an image file
         image_file = six.BytesIO(data_utils.random_bytes())
         self.client.store_image_file(image['id'], image_file)
diff --git a/tempest/api/network/admin/test_external_network_extension.py b/tempest/api/network/admin/test_external_network_extension.py
index 49a9cdb..39d03e7 100644
--- a/tempest/api/network/admin/test_external_network_extension.py
+++ b/tempest/api/network/admin/test_external_network_extension.py
@@ -95,6 +95,7 @@
         self.assertEqual(self.network['id'], show_net['id'])
         self.assertFalse(show_net['router:external'])
 
+    @decorators.skip_because(bug="1749820")
     @decorators.idempotent_id('82068503-2cf2-4ed4-b3be-ecb89432e4bb')
     @testtools.skipUnless(CONF.network_feature_enabled.floating_ips,
                           'Floating ips are not availabled')
diff --git a/tempest/api/network/admin/test_floating_ips_admin_actions.py b/tempest/api/network/admin/test_floating_ips_admin_actions.py
index 5aa337c..be0c4c6 100644
--- a/tempest/api/network/admin/test_floating_ips_admin_actions.py
+++ b/tempest/api/network/admin/test_floating_ips_admin_actions.py
@@ -22,7 +22,6 @@
 
 
 class FloatingIPAdminTestJSON(base.BaseAdminNetworkTest):
-    force_tenant_isolation = True
     credentials = ['primary', 'alt', 'admin']
 
     @classmethod
diff --git a/tempest/api/network/admin/test_negative_quotas.py b/tempest/api/network/admin/test_negative_quotas.py
index 6849653..e79f8c3 100644
--- a/tempest/api/network/admin/test_negative_quotas.py
+++ b/tempest/api/network/admin/test_negative_quotas.py
@@ -59,7 +59,7 @@
         # Try to create a third network while the quota is two
         with self.assertRaisesRegex(
                 lib_exc.Conflict,
-                "Quota exceeded for resources: \['network'\].*"):
+                r"Quota exceeded for resources: \['network'\].*"):
             n3 = self.networks_client.create_network()
             self.addCleanup(self.networks_client.delete_network,
                             n3['network']['id'])
diff --git a/tempest/api/network/test_floating_ips.py b/tempest/api/network/test_floating_ips.py
index ef4a23a..b4bb88e 100644
--- a/tempest/api/network/test_floating_ips.py
+++ b/tempest/api/network/test_floating_ips.py
@@ -15,6 +15,7 @@
 
 from tempest.api.network import base
 from tempest.common import utils
+from tempest.common.utils import data_utils
 from tempest.common.utils import net_utils
 from tempest import config
 from tempest.lib import decorators
@@ -158,11 +159,21 @@
         self.addCleanup(self.floating_ips_client.delete_floatingip,
                         created_floating_ip['id'])
         self.assertEqual(created_floating_ip['router_id'], self.router['id'])
-        network2 = self.create_network()
+        network_name = data_utils.rand_name(self.__class__.__name__)
+        network2 = self.networks_client.create_network(
+            name=network_name)['network']
+        self.addCleanup(self.networks_client.delete_network,
+                        network2['id'])
         subnet2 = self.create_subnet(network2)
+        self.addCleanup(self.subnets_client.delete_subnet, subnet2['id'])
         router2 = self.create_router(external_network_id=self.ext_net_id)
+        self.addCleanup(self.routers_client.delete_router, router2['id'])
         self.create_router_interface(router2['id'], subnet2['id'])
+        self.addCleanup(self.routers_client.remove_router_interface,
+                        router2['id'], subnet_id=subnet2['id'])
         port_other_router = self.create_port(network2)
+        self.addCleanup(self.ports_client.delete_port,
+                        port_other_router['id'])
         # Associate floating IP to the other port on another router
         floating_ip = self.floating_ips_client.update_floatingip(
             created_floating_ip['id'],
diff --git a/tempest/api/network/test_ports.py b/tempest/api/network/test_ports.py
index 5168423..246a5c3 100644
--- a/tempest/api/network/test_ports.py
+++ b/tempest/api/network/test_ports.py
@@ -52,6 +52,21 @@
         ports_list = body['ports']
         self.assertFalse(port_id in [n['id'] for n in ports_list])
 
+    def _create_subnet(self, network, gateway='',
+                       cidr=None, mask_bits=None, **kwargs):
+        subnet = self.create_subnet(network, gateway, cidr, mask_bits)
+        self.addCleanup(self.subnets_client.delete_subnet, subnet['id'])
+        return subnet
+
+    def _create_network(self, network_name=None, **kwargs):
+        network_name = network_name or data_utils.rand_name(
+            self.__class__.__name__)
+        network = self.networks_client.create_network(
+            name=network_name, **kwargs)['network']
+        self.addCleanup(self.networks_client.delete_network,
+                        network['id'])
+        return network
+
     @decorators.attr(type='smoke')
     @decorators.idempotent_id('c72c1c0c-2193-4aca-aaa4-b1442640f51c')
     def test_create_update_delete_port(self):
@@ -73,7 +88,7 @@
     @decorators.idempotent_id('67f1b811-f8db-43e2-86bd-72c074d4a42c')
     def test_create_bulk_port(self):
         network1 = self.network
-        network2 = self.create_network()
+        network2 = self._create_network()
         network_list = [network1['id'], network2['id']]
         port_list = [{'network_id': net_id} for net_id in network_list]
         body = self.ports_client.create_bulk_ports(ports=port_list)
@@ -90,7 +105,7 @@
     @decorators.attr(type='smoke')
     @decorators.idempotent_id('0435f278-40ae-48cb-a404-b8a087bc09b1')
     def test_create_port_in_allowed_allocation_pools(self):
-        network = self.create_network()
+        network = self._create_network()
         net_id = network['id']
         address = self.cidr
         address.prefixlen = self.mask_bits
@@ -100,10 +115,9 @@
             raise exceptions.InvalidConfiguration(msg)
         allocation_pools = {'allocation_pools': [{'start': str(address[2]),
                                                   'end': str(address[-2])}]}
-        subnet = self.create_subnet(network, cidr=address,
-                                    mask_bits=address.prefixlen,
-                                    **allocation_pools)
-        self.addCleanup(self.subnets_client.delete_subnet, subnet['id'])
+        self._create_subnet(network, cidr=address,
+                            mask_bits=address.prefixlen,
+                            **allocation_pools)
         body = self.ports_client.create_port(network_id=net_id)
         self.addCleanup(self.ports_client.delete_port, body['port']['id'])
         port = body['port']
@@ -153,9 +167,8 @@
     @decorators.idempotent_id('e7fe260b-1e79-4dd3-86d9-bec6a7959fc5')
     def test_port_list_filter_by_ip(self):
         # Create network and subnet
-        network = self.create_network()
-        subnet = self.create_subnet(network)
-        self.addCleanup(self.subnets_client.delete_subnet, subnet['id'])
+        network = self._create_network()
+        self._create_subnet(network)
         # Create two ports
         port_1 = self.ports_client.create_port(network_id=network['id'])
         self.addCleanup(self.ports_client.delete_port, port_1['port']['id'])
@@ -187,10 +200,8 @@
         'ip-substring-filtering extension not enabled.')
     def test_port_list_filter_by_ip_substr(self):
         # Create network and subnet
-        network = self.create_network()
-        subnet = self.create_subnet(network)
-        self.addCleanup(self.subnets_client.delete_subnet, subnet['id'])
-
+        network = self._create_network()
+        subnet = self._create_subnet(network)
         # Get two IP addresses
         ip_address_1 = None
         ip_address_2 = None
@@ -261,10 +272,8 @@
     @decorators.idempotent_id('5ad01ed0-0e6e-4c5d-8194-232801b15c72')
     def test_port_list_filter_by_router_id(self):
         # Create a router
-        network = self.create_network()
-        self.addCleanup(self.networks_client.delete_network, network['id'])
-        subnet = self.create_subnet(network)
-        self.addCleanup(self.subnets_client.delete_subnet, subnet['id'])
+        network = self._create_network()
+        self._create_subnet(network)
         router = self.create_router()
         self.addCleanup(self.routers_client.delete_router, router['id'])
         port = self.ports_client.create_port(network_id=network['id'])
@@ -294,12 +303,9 @@
     @decorators.idempotent_id('63aeadd4-3b49-427f-a3b1-19ca81f06270')
     def test_create_update_port_with_second_ip(self):
         # Create a network with two subnets
-        network = self.create_network()
-        self.addCleanup(self.networks_client.delete_network, network['id'])
-        subnet_1 = self.create_subnet(network)
-        self.addCleanup(self.subnets_client.delete_subnet, subnet_1['id'])
-        subnet_2 = self.create_subnet(network)
-        self.addCleanup(self.subnets_client.delete_subnet, subnet_2['id'])
+        network = self._create_network()
+        subnet_1 = self._create_subnet(network)
+        subnet_2 = self._create_subnet(network)
         fixed_ip_1 = [{'subnet_id': subnet_1['id']}]
         fixed_ip_2 = [{'subnet_id': subnet_2['id']}]
 
@@ -323,8 +329,7 @@
         self.assertEqual(2, len(port['fixed_ips']))
 
     def _update_port_with_security_groups(self, security_groups_names):
-        subnet_1 = self.create_subnet(self.network)
-        self.addCleanup(self.subnets_client.delete_subnet, subnet_1['id'])
+        subnet_1 = self._create_subnet(self.network)
         fixed_ip_1 = [{'subnet_id': subnet_1['id']}]
 
         security_groups_list = list()
@@ -413,10 +418,8 @@
         utils.is_extension_enabled('security-group', 'network'),
         'security-group extension not enabled.')
     def test_create_port_with_no_securitygroups(self):
-        network = self.create_network()
-        self.addCleanup(self.networks_client.delete_network, network['id'])
-        subnet = self.create_subnet(network)
-        self.addCleanup(self.subnets_client.delete_subnet, subnet['id'])
+        network = self._create_network()
+        self._create_subnet(network)
         port = self.create_port(network, security_groups=[])
         self.addCleanup(self.ports_client.delete_port, port['id'])
         self.assertIsNotNone(port['security_groups'])
diff --git a/tempest/api/network/test_routers.py b/tempest/api/network/test_routers.py
index abbb779..3ff12e4 100644
--- a/tempest/api/network/test_routers.py
+++ b/tempest/api/network/test_routers.py
@@ -39,6 +39,11 @@
         self.addCleanup(self._cleanup_router, router)
         return router
 
+    def _create_subnet(self, network, gateway='', cidr=None):
+        subnet = self.create_subnet(network, gateway, cidr)
+        self.addCleanup(self.subnets_client.delete_subnet, subnet['id'])
+        return subnet
+
     def _add_router_interface_with_subnet_id(self, router_id, subnet_id):
         interface = self.routers_client.add_router_interface(
             router_id, subnet_id=subnet_id)
@@ -65,12 +70,12 @@
                           'The public_network_id option must be specified.')
     def test_create_show_list_update_delete_router(self):
         # Create a router
-        name = data_utils.rand_name(self.__class__.__name__ + '-router')
+        router_name = data_utils.rand_name(self.__class__.__name__ + '-router')
         router = self._create_router(
-            name=name,
+            name=router_name,
             admin_state_up=False,
             external_network_id=CONF.network.public_network_id)
-        self.assertEqual(router['name'], name)
+        self.assertEqual(router['name'], router_name)
         self.assertEqual(router['admin_state_up'], False)
         self.assertEqual(
             router['external_gateway_info']['network_id'],
@@ -97,8 +102,12 @@
     @decorators.attr(type='smoke')
     @decorators.idempotent_id('b42e6e39-2e37-49cc-a6f4-8467e940900a')
     def test_add_remove_router_interface_with_subnet_id(self):
-        network = self.create_network()
-        subnet = self.create_subnet(network)
+        network_name = data_utils.rand_name(self.__class__.__name__)
+        network = self.networks_client.create_network(
+            name=network_name)['network']
+        self.addCleanup(self.networks_client.delete_network,
+                        network['id'])
+        subnet = self._create_subnet(network)
         router = self._create_router()
         # Add router interface with subnet id
         interface = self.routers_client.add_router_interface(
@@ -116,8 +125,12 @@
     @decorators.attr(type='smoke')
     @decorators.idempotent_id('2b7d2f37-6748-4d78-92e5-1d590234f0d5')
     def test_add_remove_router_interface_with_port_id(self):
-        network = self.create_network()
-        self.create_subnet(network)
+        network_name = data_utils.rand_name(self.__class__.__name__)
+        network = self.networks_client.create_network(
+            name=network_name)['network']
+        self.addCleanup(self.networks_client.delete_network,
+                        network['id'])
+        self._create_subnet(network)
         router = self._create_router()
         port_body = self.ports_client.create_port(
             network_id=network['id'])
@@ -183,13 +196,18 @@
         # Update router extra route, second ip of the range is
         # used as next hop
         for i in range(routes_num):
-            network = self.create_network()
+            network_name = data_utils.rand_name(self.__class__.__name__)
+            network = self.networks_client.create_network(
+                name=network_name)['network']
+            self.addCleanup(self.networks_client.delete_network,
+                            network['id'])
             subnet = self.create_subnet(network, cidr=next_cidr)
             next_cidr = next_cidr.next()
 
             # Add router interface with subnet id
             self.create_router_interface(router['id'], subnet['id'])
-
+            self.addCleanup(self._remove_router_interface_with_subnet_id,
+                            router['id'], subnet['id'])
             cidr = netaddr.IPNetwork(subnet['cidr'])
             next_hop = str(cidr[2])
             destination = str(subnet['cidr'])
@@ -242,13 +260,18 @@
     @decorators.attr(type='smoke')
     @decorators.idempotent_id('802c73c9-c937-4cef-824b-2191e24a6aab')
     def test_add_multiple_router_interfaces(self):
-        network01 = self.create_network(
-            network_name=data_utils.rand_name('router-network01-'))
-        network02 = self.create_network(
-            network_name=data_utils.rand_name('router-network02-'))
-        subnet01 = self.create_subnet(network01)
+        network_name = data_utils.rand_name(self.__class__.__name__)
+        network01 = self.networks_client.create_network(
+            name=network_name)['network']
+        self.addCleanup(self.networks_client.delete_network,
+                        network01['id'])
+        network02 = self.networks_client.create_network(
+            name=data_utils.rand_name(self.__class__.__name__))['network']
+        self.addCleanup(self.networks_client.delete_network,
+                        network02['id'])
+        subnet01 = self._create_subnet(network01)
         sub02_cidr = self.cidr.next()
-        subnet02 = self.create_subnet(network02, cidr=sub02_cidr)
+        subnet02 = self._create_subnet(network02, cidr=sub02_cidr)
         router = self._create_router()
         interface01 = self._add_router_interface_with_subnet_id(router['id'],
                                                                 subnet01['id'])
@@ -261,8 +284,12 @@
 
     @decorators.idempotent_id('96522edf-b4b5-45d9-8443-fa11c26e6eff')
     def test_router_interface_port_update_with_fixed_ip(self):
-        network = self.create_network()
-        subnet = self.create_subnet(network)
+        network_name = data_utils.rand_name(self.__class__.__name__)
+        network = self.networks_client.create_network(
+            name=network_name)['network']
+        self.addCleanup(self.networks_client.delete_network,
+                        network['id'])
+        subnet = self._create_subnet(network)
         router = self._create_router()
         fixed_ip = [{'subnet_id': subnet['id']}]
         interface = self._add_router_interface_with_subnet_id(router['id'],
diff --git a/tempest/api/volume/admin/test_group_snapshots.py b/tempest/api/volume/admin/test_group_snapshots.py
index 45f4caa..731a055 100644
--- a/tempest/api/volume/admin/test_group_snapshots.py
+++ b/tempest/api/volume/admin/test_group_snapshots.py
@@ -157,6 +157,57 @@
         waiters.wait_for_volume_resource_status(
             self.groups_client, grp2['id'], 'available')
 
+    @decorators.idempotent_id('7d7fc000-0b4c-4376-a372-544116d2e127')
+    @decorators.related_bug('1739031')
+    def test_delete_group_snapshots_following_updated_volumes(self):
+        volume_type = self.create_volume_type()
+
+        group_type = self.create_group_type()
+
+        # Create a volume group
+        grp = self.create_group(group_type=group_type['id'],
+                                volume_types=[volume_type['id']])
+
+        # Note: When dealing with consistency groups all volumes must
+        # reside on the same backend. Adding volumes to the same consistency
+        # group from multiple backends isn't supported. In order to ensure all
+        # volumes share the same backend, all volumes must share same
+        # volume-type and group id.
+        volume_list = []
+        for _ in range(2):
+            volume = self.create_volume(volume_type=volume_type['id'],
+                                        group_id=grp['id'])
+            volume_list.append(volume['id'])
+
+        for vol in volume_list:
+            self.groups_client.update_group(grp['id'],
+                                            remove_volumes=vol)
+            waiters.wait_for_volume_resource_status(
+                self.groups_client, grp['id'], 'available')
+
+            self.groups_client.update_group(grp['id'],
+                                            add_volumes=vol)
+            waiters.wait_for_volume_resource_status(
+                self.groups_client, grp['id'], 'available')
+
+        # Verify the created volumes are associated with consistency group
+        vols = self.volumes_client.list_volumes(detail=True)['volumes']
+        grp_vols = [v for v in vols if v['group_id'] == grp['id']]
+        self.assertEqual(2, len(grp_vols))
+
+        # Create a snapshot group
+        group_snapshot = self._create_group_snapshot(group_id=grp['id'])
+        snapshots = self.snapshots_client.list_snapshots(
+            detail=True)['snapshots']
+
+        for snap in snapshots:
+            if snap['volume_id'] in volume_list:
+                waiters.wait_for_volume_resource_status(
+                    self.snapshots_client, snap['id'], 'available')
+
+        # Delete a snapshot group
+        self._delete_group_snapshot(group_snapshot)
+
 
 class GroupSnapshotsV319Test(BaseGroupSnapshotsTest):
     _api_version = 3
diff --git a/tempest/api/volume/admin/test_multi_backend.py b/tempest/api/volume/admin/test_multi_backend.py
index c0891e4..c5c70d2 100644
--- a/tempest/api/volume/admin/test_multi_backend.py
+++ b/tempest/api/volume/admin/test_multi_backend.py
@@ -29,6 +29,10 @@
         if not CONF.volume_feature_enabled.multi_backend:
             raise cls.skipException("Cinder multi-backend feature disabled")
 
+        if len(set(CONF.volume.backend_names)) < 2:
+            raise cls.skipException("Requires at least two different "
+                                    "backend names")
+
     @classmethod
     def resource_setup(cls):
         super(VolumeMultiBackendTest, cls).resource_setup()
@@ -41,9 +45,6 @@
 
         # Volume/Type creation (uses volume_backend_name)
         # It is not allowed to create the same backend name twice
-        if len(backend_names) < 2:
-            raise cls.skipException("Requires at least two different "
-                                    "backend names")
         for backend_name in backend_names:
             # Volume/Type creation (uses backend_name)
             cls._create_type_and_volume(backend_name, False)
diff --git a/tempest/api/volume/admin/test_user_messages.py b/tempest/api/volume/admin/test_user_messages.py
index 20c3538..9907497 100644
--- a/tempest/api/volume/admin/test_user_messages.py
+++ b/tempest/api/volume/admin/test_user_messages.py
@@ -62,8 +62,16 @@
         return message_id
 
     @decorators.idempotent_id('50f29e6e-f363-42e1-8ad1-f67ae7fd4d5a')
-    def test_list_messages(self):
-        self._create_user_message()
+    def test_list_show_messages(self):
+        message_id = self._create_user_message()
+        self.addCleanup(self.messages_client.delete_message, message_id)
+
+        # show message
+        message = self.messages_client.show_message(message_id)['message']
+        for key in MESSAGE_KEYS:
+            self.assertIn(key, message.keys(), 'Missing expected key %s' % key)
+
+        # list messages
         messages = self.messages_client.list_messages()['messages']
         self.assertIsInstance(messages, list)
         for message in messages:
@@ -71,16 +79,6 @@
                 self.assertIn(key, message.keys(),
                               'Missing expected key %s' % key)
 
-    @decorators.idempotent_id('55a4a61e-c7b2-4ba0-a05d-b914bdef3070')
-    def test_show_message(self):
-        message_id = self._create_user_message()
-        self.addCleanup(self.messages_client.delete_message, message_id)
-
-        message = self.messages_client.show_message(message_id)['message']
-
-        for key in MESSAGE_KEYS:
-            self.assertIn(key, message.keys(), 'Missing expected key %s' % key)
-
     @decorators.idempotent_id('c6eb6901-cdcc-490f-b735-4fe251842aed')
     def test_delete_message(self):
         message_id = self._create_user_message()
diff --git a/tempest/api/volume/admin/test_volume_quotas.py b/tempest/api/volume/admin/test_volume_quotas.py
index 6f9daa8..e546bff 100644
--- a/tempest/api/volume/admin/test_volume_quotas.py
+++ b/tempest/api/volume/admin/test_volume_quotas.py
@@ -13,10 +13,8 @@
 #    under the License.
 
 from tempest.api.volume import base
-from tempest.common import identity
 from tempest.common import tempest_fixtures as fixtures
 from tempest.common import waiters
-from tempest.lib.common.utils import data_utils
 from tempest.lib import decorators
 
 QUOTA_KEYS = ['gigabytes', 'snapshots', 'volumes', 'backups',
@@ -25,8 +23,6 @@
 
 
 class BaseVolumeQuotasAdminTestJSON(base.BaseVolumeAdminTest):
-    force_tenant_isolation = True
-
     credentials = ['primary', 'alt', 'admin']
 
     def setUp(self):
@@ -45,6 +41,19 @@
         cls.transfer_client = cls.os_primary.volume_transfers_v2_client
         cls.alt_transfer_client = cls.os_alt.volume_transfers_v2_client
 
+    @classmethod
+    def resource_setup(cls):
+        super(BaseVolumeQuotasAdminTestJSON, cls).resource_setup()
+
+        # Save the current set of quotas so that some tests may use it
+        # to restore the quotas to their original values after they are
+        # done.
+        cls.original_quota_set = (cls.admin_quotas_client.show_quota_set(
+            cls.demo_tenant_id)['quota_set'])
+        cls.cleanup_quota_set = dict(
+            (k, v) for k, v in cls.original_quota_set.items()
+            if k in QUOTA_KEYS)
+
     @decorators.idempotent_id('59eada70-403c-4cef-a2a3-a8ce2f1b07a0')
     def test_list_quotas(self):
         quotas = (self.admin_quotas_client.show_quota_set(self.demo_tenant_id)
@@ -62,8 +71,6 @@
     @decorators.idempotent_id('3d45c99e-cc42-4424-a56e-5cbd212b63a6')
     def test_update_all_quota_resources_for_tenant(self):
         # Admin can update all the resource quota limits for a tenant
-        default_quota_set = self.admin_quotas_client.show_default_quota_set(
-            self.demo_tenant_id)['quota_set']
         new_quota_set = {'gigabytes': 1009,
                          'volumes': 11,
                          'snapshots': 11,
@@ -76,11 +83,9 @@
             self.demo_tenant_id,
             **new_quota_set)['quota_set']
 
-        cleanup_quota_set = dict(
-            (k, v) for k, v in default_quota_set.items()
-            if k in QUOTA_KEYS)
         self.addCleanup(self.admin_quotas_client.update_quota_set,
-                        self.demo_tenant_id, **cleanup_quota_set)
+                        self.demo_tenant_id, **self.cleanup_quota_set)
+
         # test that the specific values we set are actually in
         # the final result. There is nothing here that ensures there
         # would be no other values in there.
@@ -96,6 +101,25 @@
             for usage_key in QUOTA_USAGE_KEYS:
                 self.assertIn(usage_key, quota_usage[key])
 
+    @decorators.idempotent_id('874b35a9-51f1-4258-bec5-cd561b6690d3')
+    def test_delete_quota(self):
+        # Admin can delete the resource quota set for a project
+
+        self.addCleanup(self.admin_quotas_client.update_quota_set,
+                        self.demo_tenant_id, **self.cleanup_quota_set)
+
+        quota_set_default = self.admin_quotas_client.show_default_quota_set(
+            self.demo_tenant_id)['quota_set']
+        volume_default = quota_set_default['volumes']
+
+        self.admin_quotas_client.update_quota_set(
+            self.demo_tenant_id, volumes=(volume_default + 5))
+
+        self.admin_quotas_client.delete_quota_set(self.demo_tenant_id)
+        quota_set_new = (self.admin_quotas_client.show_quota_set(
+            self.demo_tenant_id)['quota_set'])
+        self.assertEqual(volume_default, quota_set_new['volumes'])
+
     @decorators.idempotent_id('ae8b6091-48ad-4bfa-a188-bbf5cc02115f')
     def test_quota_usage(self):
         quota_usage = self.admin_quotas_client.show_quota_set(
@@ -115,28 +139,6 @@
                          volume["size"],
                          new_quota_usage['gigabytes']['in_use'])
 
-    @decorators.idempotent_id('874b35a9-51f1-4258-bec5-cd561b6690d3')
-    def test_delete_quota(self):
-        # Admin can delete the resource quota set for a project
-        project_name = data_utils.rand_name('quota_tenant')
-        description = data_utils.rand_name('desc_')
-        project = identity.identity_utils(self.os_admin).create_project(
-            project_name, description=description)
-        project_id = project['id']
-        self.addCleanup(identity.identity_utils(self.os_admin).delete_project,
-                        project_id)
-        quota_set_default = self.admin_quotas_client.show_default_quota_set(
-            project_id)['quota_set']
-        volume_default = quota_set_default['volumes']
-
-        self.admin_quotas_client.update_quota_set(
-            project_id, volumes=(volume_default + 5))
-
-        self.admin_quotas_client.delete_quota_set(project_id)
-        quota_set_new = (self.admin_quotas_client.show_quota_set(project_id)
-                         ['quota_set'])
-        self.assertEqual(volume_default, quota_set_new['volumes'])
-
     @decorators.idempotent_id('8911036f-9d54-4720-80cc-a1c9796a8805')
     def test_quota_usage_after_volume_transfer(self):
         # Create a volume for transfer
diff --git a/tempest/api/volume/admin/test_volume_quotas_negative.py b/tempest/api/volume/admin/test_volume_quotas_negative.py
index d127b5f..f50f336 100644
--- a/tempest/api/volume/admin/test_volume_quotas_negative.py
+++ b/tempest/api/volume/admin/test_volume_quotas_negative.py
@@ -19,10 +19,11 @@
 from tempest.lib import exceptions as lib_exc
 
 CONF = config.CONF
+QUOTA_KEYS = ['gigabytes', 'snapshots', 'volumes', 'backups',
+              'backup_gigabytes', 'per_volume_gigabytes']
 
 
 class BaseVolumeQuotasNegativeTestJSON(base.BaseVolumeAdminTest):
-    force_tenant_isolation = True
 
     @classmethod
     def setup_credentials(cls):
@@ -32,11 +33,23 @@
     @classmethod
     def resource_setup(cls):
         super(BaseVolumeQuotasNegativeTestJSON, cls).resource_setup()
+
+        # Save the current set of quotas, then set up the cleanup method
+        # to restore the quotas to their original values after the tests
+        # from this class are done. This is needed just in case Tempest is
+        # configured to use pre-provisioned projects/user accounts.
+        cls.original_quota_set = (cls.admin_quotas_client.show_quota_set(
+            cls.demo_tenant_id)['quota_set'])
+        cls.cleanup_quota_set = dict(
+            (k, v) for k, v in cls.original_quota_set.items()
+            if k in QUOTA_KEYS)
+        cls.addClassResourceCleanup(cls.admin_quotas_client.update_quota_set,
+                                    cls.demo_tenant_id,
+                                    **cls.cleanup_quota_set)
+
         cls.shared_quota_set = {'gigabytes': 2 * CONF.volume.volume_size,
                                 'volumes': 1}
 
-        # NOTE(gfidente): no need to restore original quota set
-        # after the tests as they only work with dynamic credentials.
         cls.admin_quotas_client.update_quota_set(
             cls.demo_tenant_id,
             **cls.shared_quota_set)
diff --git a/tempest/api/volume/admin/test_volume_retype.py b/tempest/api/volume/admin/test_volume_retype.py
new file mode 100644
index 0000000..1c56eb2
--- /dev/null
+++ b/tempest/api/volume/admin/test_volume_retype.py
@@ -0,0 +1,180 @@
+#    Licensed under the Apache License, Version 2.0 (the "License"); you may
+#    not use this file except in compliance with the License. You may obtain
+#    a copy of the License at
+#
+#         http://www.apache.org/licenses/LICENSE-2.0
+#
+#    Unless required by applicable law or agreed to in writing, software
+#    distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+#    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+#    License for the specific language governing permissions and limitations
+#    under the License.
+
+import abc
+
+from oslo_log import log as logging
+
+from tempest.api.volume import base
+from tempest.common import waiters
+from tempest import config
+from tempest.lib import decorators
+
+CONF = config.CONF
+
+LOG = logging.getLogger(__name__)
+
+
+class VolumeRetypeTest(base.BaseVolumeAdminTest):
+
+    def _wait_for_internal_volume_cleanup(self, vol):
+        # When retyping a volume, Cinder creates an internal volume in the
+        # target backend. The volume in the source backend is deleted after
+        # the migration, so we need to wait for Cinder delete this volume
+        # before deleting the types we've created.
+
+        # This list should return 2 volumes until the copy and cleanup
+        # process is finished.
+        fetched_list = self.admin_volume_client.list_volumes(
+            params={'all_tenants': True,
+                    'display_name': vol['name']})['volumes']
+
+        for fetched_vol in fetched_list:
+            if fetched_vol['id'] != vol['id']:
+                # This is the Cinder internal volume
+                LOG.debug('Waiting for internal volume %s deletion',
+                          fetched_vol['id'])
+                self.admin_volume_client.wait_for_resource_deletion(
+                    fetched_vol['id'])
+                break
+
+    @abc.abstractmethod
+    def _verify_migration(self, source_vol, dest_vol):
+        pass
+
+    def _create_volume_from_snapshot(self):
+        # Create a volume in the first backend
+        src_vol = self.create_volume(volume_type=self.src_vol_type['name'])
+
+        # Create a volume snapshot
+        snapshot = self.create_snapshot(src_vol['id'])
+
+        # Create a volume from the snapshot
+        src_vol = self.create_volume(volume_type=self.src_vol_type['name'],
+                                     snapshot_id=snapshot['id'])
+
+        # Delete the snapshot
+        self.snapshots_client.delete_snapshot(snapshot['id'])
+        self.snapshots_client.wait_for_resource_deletion(snapshot['id'])
+
+        return src_vol
+
+    def _retype_volume(self, volume, migration_policy):
+
+        volume_source = self.admin_volume_client.show_volume(
+            volume['id'])['volume']
+
+        self.volumes_client.retype_volume(
+            volume['id'],
+            new_type=self.dst_vol_type['name'],
+            migration_policy=migration_policy)
+        self.addCleanup(self._wait_for_internal_volume_cleanup, volume)
+        waiters.wait_for_volume_retype(self.volumes_client, volume['id'],
+                                       self.dst_vol_type['name'])
+
+        volume_dest = self.admin_volume_client.show_volume(
+            volume['id'])['volume']
+
+        self._verify_migration(volume_source, volume_dest)
+
+
+class VolumeRetypeWithMigrationTest(VolumeRetypeTest):
+
+    @classmethod
+    def skip_checks(cls):
+        super(VolumeRetypeTest, cls).skip_checks()
+
+        if not CONF.volume_feature_enabled.multi_backend:
+            raise cls.skipException("Cinder multi-backend feature disabled.")
+
+        if len(set(CONF.volume.backend_names)) < 2:
+            raise cls.skipException("Requires at least two different "
+                                    "backend names")
+
+    @classmethod
+    def resource_setup(cls):
+        super(VolumeRetypeWithMigrationTest, cls).resource_setup()
+        # read backend name from a list.
+        backend_src = CONF.volume.backend_names[0]
+        backend_dst = CONF.volume.backend_names[1]
+
+        extra_specs_src = {"volume_backend_name": backend_src}
+        extra_specs_dst = {"volume_backend_name": backend_dst}
+
+        cls.src_vol_type = cls.create_volume_type(extra_specs=extra_specs_src)
+        cls.dst_vol_type = cls.create_volume_type(extra_specs=extra_specs_dst)
+
+    def _verify_migration(self, volume_source, volume_dest):
+
+        keys_with_no_change = ('id', 'size', 'description', 'name',
+                               'user_id', 'os-vol-tenant-attr:tenant_id')
+        keys_with_change = ('volume_type', 'os-vol-host-attr:host')
+
+        # Check the volume information after the migration.
+        self.assertEqual('success',
+                         volume_dest['os-vol-mig-status-attr:migstat'])
+        self.assertEqual('success', volume_dest['migration_status'])
+
+        for key in keys_with_no_change:
+            self.assertEqual(volume_source[key], volume_dest[key])
+
+        for key in keys_with_change:
+            self.assertNotEqual(volume_source[key], volume_dest[key])
+
+        self.assertEqual(volume_dest['volume_type'], self.dst_vol_type['name'])
+
+    @decorators.idempotent_id('a1a41f3f-9dad-493e-9f09-3ff197d477cd')
+    def test_available_volume_retype_with_migration(self):
+        src_vol = self.create_volume(volume_type=self.src_vol_type['name'])
+        self._retype_volume(src_vol, migration_policy='on-demand')
+
+    @decorators.idempotent_id('d0d9554f-e7a5-4104-8973-f35b27ccb60d')
+    def test_volume_from_snapshot_retype_with_migration(self):
+        src_vol = self._create_volume_from_snapshot()
+
+        # Migrate the volume from snapshot to the second backend
+        self._retype_volume(src_vol, migration_policy='on-demand')
+
+
+class VolumeRetypeWithoutMigrationTest(VolumeRetypeTest):
+
+    @classmethod
+    def resource_setup(cls):
+        super(VolumeRetypeWithoutMigrationTest, cls).resource_setup()
+        cls.src_vol_type = cls.create_volume_type('volume-type-1')
+        cls.dst_vol_type = cls.create_volume_type('volume-type-2')
+
+    def _verify_migration(self, volume_source, volume_dest):
+
+        keys_with_no_change = ('id', 'size', 'description', 'name',
+                               'user_id', 'os-vol-tenant-attr:tenant_id',
+                               'os-vol-host-attr:host')
+        keys_with_change = ('volume_type',)
+
+        # Check the volume information after the retype
+        self.assertIsNone(volume_dest['os-vol-mig-status-attr:migstat'])
+        self.assertIsNone(volume_dest['migration_status'])
+
+        for key in keys_with_no_change:
+            self.assertEqual(volume_source[key], volume_dest[key])
+
+        for key in keys_with_change:
+            self.assertNotEqual(volume_source[key], volume_dest[key])
+
+        self.assertEqual(volume_dest['volume_type'], self.dst_vol_type['name'])
+
+    @decorators.idempotent_id('b90412ee-465d-46e9-b249-ec84a47d5f25')
+    def test_available_volume_retype(self):
+        src_vol = self.create_volume(volume_type=self.src_vol_type['name'])
+
+        # Retype the volume from snapshot
+        self._retype_volume(src_vol, migration_policy='never')
diff --git a/tempest/api/volume/admin/test_volume_retype_with_migration.py b/tempest/api/volume/admin/test_volume_retype_with_migration.py
deleted file mode 100644
index f0b3a4f..0000000
--- a/tempest/api/volume/admin/test_volume_retype_with_migration.py
+++ /dev/null
@@ -1,107 +0,0 @@
-#    Licensed under the Apache License, Version 2.0 (the "License"); you may
-#    not use this file except in compliance with the License. You may obtain
-#    a copy of the License at
-#
-#         http://www.apache.org/licenses/LICENSE-2.0
-#
-#    Unless required by applicable law or agreed to in writing, software
-#    distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
-#    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
-#    License for the specific language governing permissions and limitations
-#    under the License.
-
-
-from oslo_log import log as logging
-
-from tempest.api.volume import base
-from tempest.common import waiters
-from tempest import config
-from tempest.lib import decorators
-
-CONF = config.CONF
-
-LOG = logging.getLogger(__name__)
-
-
-class VolumeRetypeWithMigrationTest(base.BaseVolumeAdminTest):
-
-    @classmethod
-    def skip_checks(cls):
-        super(VolumeRetypeWithMigrationTest, cls).skip_checks()
-
-        if not CONF.volume_feature_enabled.multi_backend:
-            raise cls.skipException("Cinder multi-backend feature disabled.")
-
-        if len(set(CONF.volume.backend_names)) < 2:
-            raise cls.skipException("Requires at least two different "
-                                    "backend names")
-
-    @classmethod
-    def resource_setup(cls):
-        super(VolumeRetypeWithMigrationTest, cls).resource_setup()
-        # read backend name from a list.
-        backend_src = CONF.volume.backend_names[0]
-        backend_dst = CONF.volume.backend_names[1]
-
-        extra_specs_src = {"volume_backend_name": backend_src}
-        extra_specs_dst = {"volume_backend_name": backend_dst}
-
-        src_vol_type = cls.create_volume_type(extra_specs=extra_specs_src)
-        cls.dst_vol_type = cls.create_volume_type(extra_specs=extra_specs_dst)
-
-        cls.src_vol = cls.create_volume(volume_type=src_vol_type['name'])
-
-    @classmethod
-    def resource_cleanup(cls):
-        # When retyping a volume, Cinder creates an internal volume in the
-        # target backend. The volume in the source backend is deleted after
-        # the migration, so we need to wait for Cinder delete this volume
-        # before deleting the types we've created.
-
-        # This list should return 2 volumes until the copy and cleanup
-        # process is finished.
-        fetched_list = cls.admin_volume_client.list_volumes(
-            params={'all_tenants': True,
-                    'display_name': cls.src_vol['name']})['volumes']
-
-        for fetched_vol in fetched_list:
-            if fetched_vol['id'] != cls.src_vol['id']:
-                # This is the Cinder internal volume
-                LOG.debug('Waiting for internal volume %s deletion',
-                          fetched_vol['id'])
-                cls.admin_volume_client.wait_for_resource_deletion(
-                    fetched_vol['id'])
-                break
-
-        super(VolumeRetypeWithMigrationTest, cls).resource_cleanup()
-
-    @decorators.idempotent_id('a1a41f3f-9dad-493e-9f09-3ff197d477cd')
-    def test_available_volume_retype_with_migration(self):
-
-        keys_with_no_change = ('id', 'size', 'description', 'name', 'user_id',
-                               'os-vol-tenant-attr:tenant_id')
-        keys_with_change = ('volume_type', 'os-vol-host-attr:host')
-
-        volume_source = self.admin_volume_client.show_volume(
-            self.src_vol['id'])['volume']
-
-        self.volumes_client.retype_volume(
-            self.src_vol['id'],
-            new_type=self.dst_vol_type['name'],
-            migration_policy='on-demand')
-
-        waiters.wait_for_volume_retype(self.volumes_client, self.src_vol['id'],
-                                       self.dst_vol_type['name'])
-        volume_dest = self.admin_volume_client.show_volume(
-            self.src_vol['id'])['volume']
-
-        # Check the volume information after the migration.
-        self.assertEqual('success',
-                         volume_dest['os-vol-mig-status-attr:migstat'])
-        self.assertEqual('success', volume_dest['migration_status'])
-
-        for key in keys_with_no_change:
-            self.assertEqual(volume_source[key], volume_dest[key])
-
-        for key in keys_with_change:
-            self.assertNotEqual(volume_source[key], volume_dest[key])
diff --git a/tempest/api/volume/admin/test_volume_services_negative.py b/tempest/api/volume/admin/test_volume_services_negative.py
new file mode 100644
index 0000000..3a863a1
--- /dev/null
+++ b/tempest/api/volume/admin/test_volume_services_negative.py
@@ -0,0 +1,64 @@
+# Copyright 2018 FiberHome Telecommunication Technologies CO.,LTD
+# All Rights Reserved.
+#
+#    Licensed under the Apache License, Version 2.0 (the "License"); you may
+#    not use this file except in compliance with the License. You may obtain
+#    a copy of the License at
+#
+#         http://www.apache.org/licenses/LICENSE-2.0
+#
+#    Unless required by applicable law or agreed to in writing, software
+#    distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+#    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+#    License for the specific language governing permissions and limitations
+#    under the License.
+
+from tempest.api.volume import base
+from tempest.lib import decorators
+from tempest.lib import exceptions as lib_exc
+
+
+class VolumeServicesNegativeTest(base.BaseVolumeAdminTest):
+
+    @classmethod
+    def resource_setup(cls):
+        super(VolumeServicesNegativeTest, cls).resource_setup()
+        services = cls.admin_volume_services_client.list_services()['services']
+        cls.host = services[0]['host']
+        cls.binary = services[0]['binary']
+
+    @decorators.attr(type='negative')
+    @decorators.idempotent_id('3246ce65-ba70-4159-aa3b-082c28e4b484')
+    def test_enable_service_with_invalid_host(self):
+        self.assertRaises(lib_exc.NotFound,
+                          self.admin_volume_services_client.enable_service,
+                          host='invalid_host', binary=self.binary)
+
+    @decorators.attr(type='negative')
+    @decorators.idempotent_id('c571f179-c6e6-4c50-a0ab-368b628a8ac1')
+    def test_disable_service_with_invalid_binary(self):
+        self.assertRaises(lib_exc.NotFound,
+                          self.admin_volume_services_client.disable_service,
+                          host=self.host, binary='invalid_binary')
+
+    @decorators.attr(type='negative')
+    @decorators.idempotent_id('77767b36-5e8f-4c68-a0b5-2308cc21ec64')
+    def test_disable_log_reason_with_no_reason(self):
+        self.assertRaises(lib_exc.BadRequest,
+                          self.admin_volume_services_client.disable_log_reason,
+                          host=self.host, binary=self.binary,
+                          disabled_reason=None)
+
+    @decorators.attr(type='negative')
+    @decorators.idempotent_id('712bfab8-1f44-4eb5-a632-fa70bf78f05e')
+    def test_freeze_host_with_invalid_host(self):
+        self.assertRaises(lib_exc.BadRequest,
+                          self.admin_volume_services_client.freeze_host,
+                          host='invalid_host')
+
+    @decorators.attr(type='negative')
+    @decorators.idempotent_id('7c6287c9-d655-47e1-9a11-76f6657a6dce')
+    def test_thaw_host_with_invalid_host(self):
+        self.assertRaises(lib_exc.BadRequest,
+                          self.admin_volume_services_client.thaw_host,
+                          host='invalid_host')
diff --git a/tempest/api/volume/admin/test_volume_snapshot_quotas_negative.py b/tempest/api/volume/admin/test_volume_snapshot_quotas_negative.py
index 0f4e90f..74eb792 100644
--- a/tempest/api/volume/admin/test_volume_snapshot_quotas_negative.py
+++ b/tempest/api/volume/admin/test_volume_snapshot_quotas_negative.py
@@ -19,10 +19,11 @@
 from tempest.lib import exceptions as lib_exc
 
 CONF = config.CONF
+QUOTA_KEYS = ['gigabytes', 'snapshots', 'volumes', 'backups',
+              'backup_gigabytes', 'per_volume_gigabytes']
 
 
 class VolumeSnapshotQuotasNegativeTestJSON(base.BaseVolumeAdminTest):
-    force_tenant_isolation = True
 
     @classmethod
     def skip_checks(cls):
@@ -38,12 +39,24 @@
     @classmethod
     def resource_setup(cls):
         super(VolumeSnapshotQuotasNegativeTestJSON, cls).resource_setup()
+
+        # Save the current set of quotas, then set up the cleanup method
+        # to restore the quotas to their original values after the tests
+        # from this class are done. This is needed just in case Tempest is
+        # configured to use pre-provisioned projects/user accounts.
+        cls.original_quota_set = (cls.admin_quotas_client.show_quota_set(
+            cls.demo_tenant_id)['quota_set'])
+        cls.cleanup_quota_set = dict(
+            (k, v) for k, v in cls.original_quota_set.items()
+            if k in QUOTA_KEYS)
+        cls.addClassResourceCleanup(cls.admin_quotas_client.update_quota_set,
+                                    cls.demo_tenant_id,
+                                    **cls.cleanup_quota_set)
+
         cls.default_volume_size = CONF.volume.volume_size
         cls.shared_quota_set = {'gigabytes': 3 * cls.default_volume_size,
                                 'volumes': 1, 'snapshots': 1}
 
-        # NOTE(gfidente): no need to restore original quota set
-        # after the tests as they only work with tenant isolation.
         cls.admin_quotas_client.update_quota_set(
             cls.demo_tenant_id,
             **cls.shared_quota_set)
diff --git a/tempest/api/volume/admin/test_volumes_backup.py b/tempest/api/volume/admin/test_volumes_backup.py
index 375aacb..45060d0 100644
--- a/tempest/api/volume/admin/test_volumes_backup.py
+++ b/tempest/api/volume/admin/test_volumes_backup.py
@@ -59,9 +59,9 @@
         volume = self.create_volume()
         # Create backup
         backup_name = data_utils.rand_name(self.__class__.__name__ + '-Backup')
-        backup = (self.create_backup(backup_client=self.admin_backups_client,
-                                     volume_id=volume['id'],
-                                     name=backup_name))
+        backup = self.create_backup(volume_id=volume['id'], name=backup_name)
+        waiters.wait_for_volume_resource_status(self.volumes_client,
+                                                volume['id'], 'available')
         self.assertEqual(backup_name, backup['name'])
 
         # Export Backup
@@ -103,21 +103,22 @@
         self.assertIn(new_id, [b['id'] for b in backups])
 
         # Restore backup
-        restore = self.admin_backups_client.restore_backup(
-            backup['id'])['restore']
-        self.addCleanup(self.admin_volume_client.delete_volume,
+        restore = self.backups_client.restore_backup(backup['id'])['restore']
+        self.addCleanup(self.volumes_client.delete_volume,
                         restore['volume_id'])
         self.assertEqual(backup['id'], restore['backup_id'])
-        waiters.wait_for_volume_resource_status(self.admin_volume_client,
-                                                restore['volume_id'],
-                                                'available')
+
+        # When restore operation is performed then, backup['id']
+        # goes to 'restoring' state so we need to wait for
+        # backup['id'] to become 'available'.
+        waiters.wait_for_volume_resource_status(
+            self.backups_client, backup['id'], 'available')
+        waiters.wait_for_volume_resource_status(
+            self.volumes_client, restore['volume_id'], 'available')
 
         # Verify if restored volume is there in volume list
-        volumes = self.admin_volume_client.list_volumes()['volumes']
+        volumes = self.volumes_client.list_volumes()['volumes']
         self.assertIn(restore['volume_id'], [v['id'] for v in volumes])
-        waiters.wait_for_volume_resource_status(self.admin_backups_client,
-                                                import_backup['id'],
-                                                'available')
 
     @decorators.idempotent_id('47a35425-a891-4e13-961c-c45deea21e94')
     def test_volume_backup_reset_status(self):
@@ -126,12 +127,12 @@
         # Create a backup
         backup_name = data_utils.rand_name(
             self.__class__.__name__ + '-Backup')
-        backup = self.create_backup(backup_client=self.admin_backups_client,
-                                    volume_id=volume['id'],
-                                    name=backup_name)
+        backup = self.create_backup(volume_id=volume['id'], name=backup_name)
+        waiters.wait_for_volume_resource_status(self.volumes_client,
+                                                volume['id'], 'available')
         self.assertEqual(backup_name, backup['name'])
         # Reset backup status to error
         self.admin_backups_client.reset_backup_status(backup_id=backup['id'],
                                                       status="error")
-        waiters.wait_for_volume_resource_status(self.admin_backups_client,
+        waiters.wait_for_volume_resource_status(self.backups_client,
                                                 backup['id'], 'error')
diff --git a/tempest/api/volume/test_volume_absolute_limits.py b/tempest/api/volume/test_volume_absolute_limits.py
index 4018468..00a3375 100644
--- a/tempest/api/volume/test_volume_absolute_limits.py
+++ b/tempest/api/volume/test_volume_absolute_limits.py
@@ -17,7 +17,6 @@
 from tempest import config
 from tempest.lib import decorators
 
-
 CONF = config.CONF
 
 
@@ -32,9 +31,16 @@
     @classmethod
     def resource_setup(cls):
         super(AbsoluteLimitsTests, cls).resource_setup()
+
         # Create a shared volume for tests
         cls.volume = cls.create_volume()
 
+    @classmethod
+    def skip_checks(cls):
+        super(AbsoluteLimitsTests, cls).skip_checks()
+        if not CONF.auth.use_dynamic_credentials:
+            raise cls.skipException("Must use dynamic credentials.")
+
     @decorators.idempotent_id('8e943f53-e9d6-4272-b2e9-adcf2f7c29ad')
     def test_get_volume_absolute_limits(self):
         # get volume limit for a tenant
diff --git a/tempest/api/volume/test_volume_transfers.py b/tempest/api/volume/test_volume_transfers.py
index 4108da5..75e81b7 100644
--- a/tempest/api/volume/test_volume_transfers.py
+++ b/tempest/api/volume/test_volume_transfers.py
@@ -15,6 +15,7 @@
 
 from tempest.api.volume import base
 from tempest.common import waiters
+from tempest.lib.common.utils import test_utils
 from tempest.lib import decorators
 
 
@@ -43,6 +44,9 @@
         transfer = self.client.create_volume_transfer(
             volume_id=volume['id'])['transfer']
         transfer_id = transfer['id']
+        self.addCleanup(test_utils.call_and_ignore_notfound_exc,
+                        self.client.delete_volume_transfer,
+                        transfer_id)
         auth_key = transfer['auth_key']
         waiters.wait_for_volume_resource_status(
             self.volumes_client, volume['id'], 'awaiting-transfer')
@@ -81,6 +85,9 @@
         # Create a volume transfer
         transfer_id = self.client.create_volume_transfer(
             volume_id=volume['id'])['transfer']['id']
+        self.addCleanup(test_utils.call_and_ignore_notfound_exc,
+                        self.client.delete_volume_transfer,
+                        transfer_id)
         waiters.wait_for_volume_resource_status(
             self.volumes_client, volume['id'], 'awaiting-transfer')
 
diff --git a/tempest/api/volume/test_volumes_backup.py b/tempest/api/volume/test_volumes_backup.py
index 552b231..c178272 100644
--- a/tempest/api/volume/test_volumes_backup.py
+++ b/tempest/api/volume/test_volumes_backup.py
@@ -117,6 +117,8 @@
             self.__class__.__name__ + '-Backup')
         backup = self.create_backup(volume_id=volume['id'],
                                     name=backup_name, force=True)
+        waiters.wait_for_volume_resource_status(self.volumes_client,
+                                                volume['id'], 'in-use')
         self.assertEqual(backup_name, backup['name'])
 
     @decorators.idempotent_id('2a8ba340-dff2-4511-9db7-646f07156b15')
@@ -128,10 +130,12 @@
 
         volume_details = self.volumes_client.show_volume(
             volume['id'])['volume']
-        self.assertEqual('true', volume_details['bootable'])
+        self.assertTrue(volume_details['bootable'])
 
         # Create a backup
         backup = self.create_backup(volume_id=volume['id'])
+        waiters.wait_for_volume_resource_status(self.volumes_client,
+                                                volume['id'], 'available')
 
         # Restore the backup
         restored_volume_id = self.restore_backup(backup['id'])['volume_id']
@@ -140,7 +144,7 @@
         restored_volume_info = self.volumes_client.show_volume(
             restored_volume_id)['volume']
 
-        self.assertEqual('true', restored_volume_info['bootable'])
+        self.assertTrue(restored_volume_info['bootable'])
 
 
 class VolumesBackupsV39Test(base.BaseVolumeTest):
@@ -160,6 +164,8 @@
         # Create volume and backup
         volume = self.create_volume()
         backup = self.create_backup(volume_id=volume['id'])
+        waiters.wait_for_volume_resource_status(self.volumes_client,
+                                                volume['id'], 'available')
 
         # Update backup and assert response body for update_backup method
         update_kwargs = {
diff --git a/tempest/api/volume/test_volumes_extend.py b/tempest/api/volume/test_volumes_extend.py
index 5d339c4..ac9a9c7 100644
--- a/tempest/api/volume/test_volumes_extend.py
+++ b/tempest/api/volume/test_volumes_extend.py
@@ -33,7 +33,7 @@
     def test_volume_extend(self):
         # Extend Volume Test.
         volume = self.create_volume(image_ref=self.image_ref)
-        extend_size = volume['size'] + 1
+        extend_size = volume['size'] * 2
         self.volumes_client.extend_volume(volume['id'],
                                           new_size=extend_size)
         waiters.wait_for_volume_resource_status(self.volumes_client,
@@ -48,7 +48,7 @@
         volume = self.create_volume()
         self.create_snapshot(volume['id'])
 
-        extend_size = volume['size'] + 1
+        extend_size = volume['size'] * 2
         self.volumes_client.extend_volume(volume['id'], new_size=extend_size)
 
         waiters.wait_for_volume_resource_status(self.volumes_client,
diff --git a/tempest/api/volume/test_volumes_negative.py b/tempest/api/volume/test_volumes_negative.py
index f139283..866bd87 100644
--- a/tempest/api/volume/test_volumes_negative.py
+++ b/tempest/api/volume/test_volumes_negative.py
@@ -103,21 +103,24 @@
     def test_create_volume_with_nonexistent_volume_type(self):
         # Should not be able to create volume with non-existent volume type
         self.assertRaises(lib_exc.NotFound, self.volumes_client.create_volume,
-                          size='1', volume_type=data_utils.rand_uuid())
+                          size=CONF.volume.volume_size,
+                          volume_type=data_utils.rand_uuid())
 
     @decorators.attr(type=['negative'])
     @decorators.idempotent_id('0c36f6ae-4604-4017-b0a9-34fdc63096f9')
     def test_create_volume_with_nonexistent_snapshot_id(self):
         # Should not be able to create volume with non-existent snapshot
         self.assertRaises(lib_exc.NotFound, self.volumes_client.create_volume,
-                          size='1', snapshot_id=data_utils.rand_uuid())
+                          size=CONF.volume.volume_size,
+                          snapshot_id=data_utils.rand_uuid())
 
     @decorators.attr(type=['negative'])
     @decorators.idempotent_id('47c73e08-4be8-45bb-bfdf-0c4e79b88344')
     def test_create_volume_with_nonexistent_source_volid(self):
         # Should not be able to create volume with non-existent source volume
         self.assertRaises(lib_exc.NotFound, self.volumes_client.create_volume,
-                          size='1', source_volid=data_utils.rand_uuid())
+                          size=CONF.volume.volume_size,
+                          source_volid=data_utils.rand_uuid())
 
     @decorators.attr(type=['negative'])
     @decorators.idempotent_id('0186422c-999a-480e-a026-6a665744c30c')
diff --git a/tempest/api/volume/test_volumes_snapshots.py b/tempest/api/volume/test_volumes_snapshots.py
index 52114bc..93638b8 100644
--- a/tempest/api/volume/test_volumes_snapshots.py
+++ b/tempest/api/volume/test_volumes_snapshots.py
@@ -15,6 +15,7 @@
 
 from tempest.api.volume import base
 from tempest.common import utils
+from tempest.common import waiters
 from tempest import config
 from tempest.lib.common.utils import data_utils
 from tempest.lib import decorators
@@ -163,6 +164,8 @@
 
         backup = self.create_backup(volume_id=self.volume_origin['id'],
                                     snapshot_id=snapshot['id'])
+        waiters.wait_for_volume_resource_status(self.snapshots_client,
+                                                snapshot['id'], 'available')
         backup_info = self.backups_client.show_backup(backup['id'])['backup']
         self.assertEqual(self.volume_origin['id'], backup_info['volume_id'])
         self.assertEqual(snapshot['id'], backup_info['snapshot_id'])
diff --git a/tempest/api/volume/test_volumes_snapshots_negative.py b/tempest/api/volume/test_volumes_snapshots_negative.py
index ea5f036..0453c0a 100644
--- a/tempest/api/volume/test_volumes_snapshots_negative.py
+++ b/tempest/api/volume/test_volumes_snapshots_negative.py
@@ -50,7 +50,7 @@
     @decorators.idempotent_id('677863d1-34f9-456d-b6ac-9924f667a7f4')
     def test_volume_from_snapshot_decreasing_size(self):
         # Creates a volume a snapshot passing a size different from the source
-        src_size = CONF.volume.volume_size + 1
+        src_size = CONF.volume.volume_size * 2
 
         src_vol = self.create_volume(size=src_size)
         src_snap = self.create_snapshot(src_vol['id'])
@@ -58,7 +58,7 @@
         # Destination volume smaller than source
         self.assertRaises(lib_exc.BadRequest,
                           self.volumes_client.create_volume,
-                          size=src_size - 1,
+                          size=CONF.volume.volume_size,
                           snapshot_id=src_snap['id'])
 
     @decorators.attr(type=['negative'])
diff --git a/tempest/clients.py b/tempest/clients.py
index 0d16748..2a07be9 100644
--- a/tempest/clients.py
+++ b/tempest/clients.py
@@ -241,36 +241,37 @@
         # if only api_v3 is enabled, all these clients should be available
         if (CONF.volume_feature_enabled.api_v2 or
             CONF.volume_feature_enabled.api_v3):
-            self.backups_v2_client = self.volume_v2.BackupsClient()
+            self.backups_v2_client = self.volume_v3.BackupsClient()
             self.encryption_types_v2_client = \
-                self.volume_v2.EncryptionTypesClient()
+                self.volume_v3.EncryptionTypesClient()
             self.snapshot_manage_v2_client = \
-                self.volume_v2.SnapshotManageClient()
-            self.snapshots_v2_client = self.volume_v2.SnapshotsClient()
+                self.volume_v3.SnapshotManageClient()
+            self.snapshots_v2_client = self.volume_v3.SnapshotsClient()
             self.volume_capabilities_v2_client = \
-                self.volume_v2.CapabilitiesClient()
-            self.volume_manage_v2_client = self.volume_v2.VolumeManageClient()
-            self.volume_qos_v2_client = self.volume_v2.QosSpecsClient()
-            self.volume_services_v2_client = self.volume_v2.ServicesClient()
-            self.volume_types_v2_client = self.volume_v2.TypesClient()
-            self.volume_hosts_v2_client = self.volume_v2.HostsClient()
-            self.volume_quotas_v2_client = self.volume_v2.QuotasClient()
+                self.volume_v3.CapabilitiesClient()
+            self.volume_manage_v2_client = self.volume_v3.VolumeManageClient()
+            self.volume_qos_v2_client = self.volume_v3.QosSpecsClient()
+            self.volume_services_v2_client = self.volume_v3.ServicesClient()
+            self.volume_types_v2_client = self.volume_v3.TypesClient()
+            self.volume_hosts_v2_client = self.volume_v3.HostsClient()
+            self.volume_quotas_v2_client = self.volume_v3.QuotasClient()
             self.volume_quota_classes_v2_client = \
-                self.volume_v2.QuotaClassesClient()
+                self.volume_v3.QuotaClassesClient()
             self.volume_scheduler_stats_v2_client = \
-                self.volume_v2.SchedulerStatsClient()
+                self.volume_v3.SchedulerStatsClient()
             self.volume_transfers_v2_client = \
-                self.volume_v2.TransfersClient()
+                self.volume_v3.TransfersClient()
             self.volume_v2_availability_zone_client = \
-                self.volume_v2.AvailabilityZoneClient()
-            self.volume_v2_limits_client = self.volume_v2.LimitsClient()
-            self.volumes_v2_client = self.volume_v2.VolumesClient()
+                self.volume_v3.AvailabilityZoneClient()
+            self.volume_v2_limits_client = self.volume_v3.LimitsClient()
+            self.volumes_v2_client = self.volume_v3.VolumesClient()
             self.volumes_v2_extension_client = \
-                self.volume_v2.ExtensionsClient()
+                self.volume_v3.ExtensionsClient()
 
             # Set default client for users that don't need explicit version
             self.volumes_client_latest = self.volumes_v2_client
             self.snapshots_client_latest = self.snapshots_v2_client
+            self.backups_client_latest = self.backups_v2_client
 
         if CONF.volume_feature_enabled.api_v3:
             self.backups_v3_client = self.volume_v3.BackupsClient()
@@ -286,6 +287,7 @@
             # Set default client for users that don't need explicit version
             self.volumes_client_latest = self.volumes_v3_client
             self.snapshots_client_latest = self.snapshots_v3_client
+            self.backups_client_latest = self.backups_v3_client
 
     def _set_object_storage_clients(self):
         self.account_client = self.object_storage.AccountClient()
diff --git a/tempest/cmd/account_generator.py b/tempest/cmd/account_generator.py
index 1c671ec..9be8ee2 100755
--- a/tempest/cmd/account_generator.py
+++ b/tempest/cmd/account_generator.py
@@ -311,5 +311,6 @@
         resources.extend(generate_resources(cred_provider, opts.admin))
     dump_accounts(resources, opts.identity_version, opts.accounts)
 
+
 if __name__ == "__main__":
     main()
diff --git a/tempest/cmd/init.py b/tempest/cmd/init.py
index 9a85d89..d84f3a3 100644
--- a/tempest/cmd/init.py
+++ b/tempest/cmd/init.py
@@ -26,7 +26,7 @@
 
 LOG = logging.getLogger(__name__)
 
-STESTR_CONF = """[DEFAULT]
+STESTR_CONF = r"""[DEFAULT]
 test_path=%s
 top_dir=%s
 group_regex=([^\.]*\.)*
@@ -136,7 +136,7 @@
         if not os.path.isdir(local_dir):
             LOG.debug('Creating local working dir: %s', local_dir)
             os.mkdir(local_dir)
-        elif not os.listdir(local_dir) == []:
+        elif os.listdir(local_dir):
             raise OSError("Directory you are trying to initialize already "
                           "exists and is not empty: %s" % local_dir)
 
diff --git a/tempest/cmd/run.py b/tempest/cmd/run.py
index 72ee715..a27425c 100644
--- a/tempest/cmd/run.py
+++ b/tempest/cmd/run.py
@@ -244,7 +244,7 @@
                                  'each newline')
         parser.add_argument('--load-list', '--load_list',
                             help='Path to a non-regex whitelist file, '
-                                 'this file contains a seperate test '
+                                 'this file contains a separate test '
                                  'on each newline. This command'
                                  'supports files created by the tempest'
                                  'run ``--list-tests`` command')
diff --git a/tempest/cmd/subunit_describe_calls.py b/tempest/cmd/subunit_describe_calls.py
index a4402fe..8dcf575 100644
--- a/tempest/cmd/subunit_describe_calls.py
+++ b/tempest/cmd/subunit_describe_calls.py
@@ -95,7 +95,7 @@
     ip_re = re.compile(r'(^|[^0-9])[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]'
                        '{1,3}([^0-9]|$)')
     url_re = re.compile(r'.*INFO.*Request \((?P<name>.*)\): (?P<code>[\d]{3}) '
-                        '(?P<verb>\w*) (?P<url>.*) .*')
+                        r'(?P<verb>\w*) (?P<url>.*) .*')
     port_re = re.compile(r'.*:(?P<port>\d+).*')
     path_re = re.compile(r'http[s]?://[^/]*/(?P<path>.*)')
     request_re = re.compile(r'.* Request - Headers: (?P<headers>.*)')
diff --git a/tempest/cmd/verify_tempest_config.py b/tempest/cmd/verify_tempest_config.py
index 15af271..aa333b3 100644
--- a/tempest/cmd/verify_tempest_config.py
+++ b/tempest/cmd/verify_tempest_config.py
@@ -488,5 +488,6 @@
             traceback.print_exc()
             raise
 
+
 if __name__ == "__main__":
     main()
diff --git a/tempest/common/credentials_factory.py b/tempest/common/credentials_factory.py
index 75db155..c6e5dcb 100644
--- a/tempest/common/credentials_factory.py
+++ b/tempest/common/credentials_factory.py
@@ -210,6 +210,7 @@
     except exceptions.InvalidConfiguration:
         return False
 
+
 # === Credentials
 
 # Type of credentials available from configuration
diff --git a/tempest/common/custom_matchers.py b/tempest/common/custom_matchers.py
index ed11b21..c702d88 100644
--- a/tempest/common/custom_matchers.py
+++ b/tempest/common/custom_matchers.py
@@ -225,9 +225,9 @@
             elif key in ('content-type', 'date', 'last-modified',
                          'x-copied-from-last-modified') and not value:
                 return InvalidFormat(key, value)
-            elif key == 'x-timestamp' and not re.match("^\d+\.?\d*\Z", value):
+            elif key == 'x-timestamp' and not re.match(r"^\d+\.?\d*\Z", value):
                 return InvalidFormat(key, value)
-            elif key == 'x-copied-from' and not re.match("\S+/\S+", value):
+            elif key == 'x-copied-from' and not re.match(r"\S+/\S+", value):
                 return InvalidFormat(key, value)
             elif key == 'x-trans-id' and \
                 not re.match("^tx[0-9a-f]{21}-[0-9a-f]{10}.*", value):
diff --git a/tempest/common/utils/__init__.py b/tempest/common/utils/__init__.py
index 225a713..167bf5b 100644
--- a/tempest/common/utils/__init__.py
+++ b/tempest/common/utils/__init__.py
@@ -40,6 +40,7 @@
         self.__dict__[attr] = attr_obj
         return attr_obj
 
+
 data_utils = DataUtils()
 
 
diff --git a/tempest/common/waiters.py b/tempest/common/waiters.py
index 08e2a12..0e86f05 100644
--- a/tempest/common/waiters.py
+++ b/tempest/common/waiters.py
@@ -287,3 +287,24 @@
             raise lib_exc.TimeoutException(message)
 
     return body
+
+
+def wait_for_interface_detach(client, server_id, port_id):
+    """Waits for an interface to be detached from a server."""
+    body = client.list_interfaces(server_id)['interfaceAttachments']
+    ports = [iface['port_id'] for iface in body]
+    start = int(time.time())
+
+    while port_id in ports:
+        time.sleep(client.build_interval)
+        body = client.list_interfaces(server_id)['interfaceAttachments']
+        ports = [iface['port_id'] for iface in body]
+        if port_id not in ports:
+            return body
+
+        timed_out = int(time.time()) - start >= client.build_timeout
+        if timed_out:
+            message = ('Interface %s failed to detach from server %s within '
+                       'the required time (%s s)' % (port_id, server_id,
+                                                     client.build_timeout))
+            raise lib_exc.TimeoutException(message)
diff --git a/tempest/config.py b/tempest/config.py
index 7133b3d..cc0ba34 100644
--- a/tempest/config.py
+++ b/tempest/config.py
@@ -61,11 +61,7 @@
                      "users. This option requires that OpenStack Identity "
                      "API admin credentials are known. If false, isolated "
                      "test cases and parallel execution, can still be "
-                     "achieved configuring a list of test accounts",
-                deprecated_opts=[cfg.DeprecatedOpt('allow_tenant_isolation',
-                                                   group='auth'),
-                                 cfg.DeprecatedOpt('allow_tenant_isolation',
-                                                   group='compute')]),
+                     "achieved configuring a list of test accounts"),
     cfg.ListOpt('tempest_roles',
                 help="Roles to assign to all users created by tempest",
                 default=[]),
@@ -752,7 +748,7 @@
                help='Timeout in seconds to wait for a volume to become '
                     'available.'),
     cfg.StrOpt('catalog_type',
-               default='volume',
+               default='volumev3',
                help="Catalog type of the Volume Service"),
     cfg.StrOpt('region',
                default='',
@@ -1078,7 +1074,7 @@
     return opt_list
 
 
-# this should never be called outside of this class
+# This should never be called outside of this module
 class TempestConfigPrivate(object):
     """Provides OpenStack configuration information."""
 
diff --git a/tempest/hacking/checks.py b/tempest/hacking/checks.py
index b6e7f8c..a57a360 100644
--- a/tempest/hacking/checks.py
+++ b/tempest/hacking/checks.py
@@ -287,10 +287,10 @@
     if pep8.noqa(physical_line):
         return
 
-    if not re.match('class .*Test.*\(.*Admin.*\):', logical_line):
+    if not re.match(r'class .*Test.*\(.*Admin.*\):', logical_line):
         return
 
-    if not re.match('.\/tempest\/api\/.*\/admin\/.*', filename):
+    if not re.match(r'.\/tempest\/api\/.*\/admin\/.*', filename):
         msg = 'T115: All admin tests should exist under admin path.'
         yield(0, msg)
 
diff --git a/tempest/hacking/ignored_list_T110.txt b/tempest/hacking/ignored_list_T110.txt
deleted file mode 100644
index 0e7e894..0000000
--- a/tempest/hacking/ignored_list_T110.txt
+++ /dev/null
@@ -1 +0,0 @@
-./tempest/services/object_storage/object_client.py
diff --git a/tempest/lib/api_schema/response/compute/v2_1/flavors.py b/tempest/lib/api_schema/response/compute/v2_1/flavors.py
index 547d94d..43e80cc 100644
--- a/tempest/lib/api_schema/response/compute/v2_1/flavors.py
+++ b/tempest/lib/api_schema/response/compute/v2_1/flavors.py
@@ -82,11 +82,7 @@
     }
 }
 
-unset_flavor_extra_specs = {
-    'status_code': [200]
-}
-
-create_get_flavor_details = {
+create_update_get_flavor_details = {
     'status_code': [200],
     'response_body': {
         'type': 'object',
diff --git a/tempest/lib/api_schema/response/compute/v2_1/flavors_extra_specs.py b/tempest/lib/api_schema/response/compute/v2_1/flavors_extra_specs.py
index a438d48..3aa1eda 100644
--- a/tempest/lib/api_schema/response/compute/v2_1/flavors_extra_specs.py
+++ b/tempest/lib/api_schema/response/compute/v2_1/flavors_extra_specs.py
@@ -20,7 +20,7 @@
             'extra_specs': {
                 'type': 'object',
                 'patternProperties': {
-                    '^[a-zA-Z0-9_\-\. :]+$': {'type': 'string'}
+                    r'^[a-zA-Z0-9_\-\. :]+$': {'type': 'string'}
                 }
             }
         },
@@ -29,12 +29,16 @@
     }
 }
 
+unset_flavor_extra_specs = {
+    'status_code': [200]
+}
+
 set_get_flavor_extra_specs_key = {
     'status_code': [200],
     'response_body': {
         'type': 'object',
         'patternProperties': {
-            '^[a-zA-Z0-9_\-\. :]+$': {'type': 'string'}
+            r'^[a-zA-Z0-9_\-\. :]+$': {'type': 'string'}
         }
     }
 }
diff --git a/tempest/lib/api_schema/response/compute/v2_11/services.py b/tempest/lib/api_schema/response/compute/v2_11/services.py
index 18b833b..9ece1f9 100644
--- a/tempest/lib/api_schema/response/compute/v2_11/services.py
+++ b/tempest/lib/api_schema/response/compute/v2_11/services.py
@@ -44,3 +44,10 @@
         'required': ['service']
     }
 }
+
+# **** Schemas unchanged in microversion 2.11 since microversion 2.1 ****
+# Note(felipemonteiro): Below are the unchanged schema in this microversion. We
+# need to keep this schema in this file to have the generic way to select the
+# right schema based on self.schema_versions_info mapping in service client.
+enable_disable_service = copy.deepcopy(services.enable_disable_service)
+disable_log_reason = copy.deepcopy(services.disable_log_reason)
diff --git a/tempest/lib/api_schema/response/compute/v2_19/servers.py b/tempest/lib/api_schema/response/compute/v2_19/servers.py
index 05cc32c..fd9e933 100644
--- a/tempest/lib/api_schema/response/compute/v2_19/servers.py
+++ b/tempest/lib/api_schema/response/compute/v2_19/servers.py
@@ -14,9 +14,9 @@
 
 import copy
 
-from tempest.lib.api_schema.response.compute.v2_1 import servers as serversv21
 from tempest.lib.api_schema.response.compute.v2_16 import servers \
     as serversv216
+from tempest.lib.api_schema.response.compute.v2_9 import servers as serversv29
 
 list_servers = copy.deepcopy(serversv216.list_servers)
 
@@ -32,20 +32,20 @@
 list_servers_detail['response_body']['properties']['servers']['items'][
     'required'].append('description')
 
-update_server = copy.deepcopy(serversv21.update_server)
+update_server = copy.deepcopy(serversv29.update_server)
 update_server['response_body']['properties']['server'][
     'properties'].update({'description': {'type': ['string', 'null']}})
 update_server['response_body']['properties']['server'][
     'required'].append('description')
 
-rebuild_server = copy.deepcopy(serversv21.rebuild_server)
+rebuild_server = copy.deepcopy(serversv29.rebuild_server)
 rebuild_server['response_body']['properties']['server'][
     'properties'].update({'description': {'type': ['string', 'null']}})
 rebuild_server['response_body']['properties']['server'][
     'required'].append('description')
 
 rebuild_server_with_admin_pass = copy.deepcopy(
-    serversv21.rebuild_server_with_admin_pass)
+    serversv29.rebuild_server_with_admin_pass)
 rebuild_server_with_admin_pass['response_body']['properties']['server'][
     'properties'].update({'description': {'type': ['string', 'null']}})
 rebuild_server_with_admin_pass['response_body']['properties']['server'][
diff --git a/tempest/lib/api_schema/response/compute/v2_26/servers.py b/tempest/lib/api_schema/response/compute/v2_26/servers.py
index b03bdf6..5c35eab 100644
--- a/tempest/lib/api_schema/response/compute/v2_26/servers.py
+++ b/tempest/lib/api_schema/response/compute/v2_26/servers.py
@@ -43,6 +43,25 @@
 list_servers_detail['response_body']['properties']['servers']['items'][
     'required'].append('tags')
 
+update_server = copy.deepcopy(servers219.update_server)
+update_server['response_body']['properties']['server'][
+    'properties'].update({'tags': tag_items})
+update_server['response_body']['properties']['server'][
+    'required'].append('tags')
+
+rebuild_server = copy.deepcopy(servers219.rebuild_server)
+rebuild_server['response_body']['properties']['server'][
+    'properties'].update({'tags': tag_items})
+rebuild_server['response_body']['properties']['server'][
+    'required'].append('tags')
+
+rebuild_server_with_admin_pass = copy.deepcopy(
+    servers219.rebuild_server_with_admin_pass)
+rebuild_server_with_admin_pass['response_body']['properties']['server'][
+    'properties'].update({'tags': tag_items})
+rebuild_server_with_admin_pass['response_body']['properties']['server'][
+    'required'].append('tags')
+
 # list response schema wasn't changed for v2.26 so use v2.1
 
 list_servers = copy.deepcopy(servers21.list_servers)
diff --git a/tempest/lib/api_schema/response/compute/v2_47/servers.py b/tempest/lib/api_schema/response/compute/v2_47/servers.py
index 37a084f..5d6d4c3 100644
--- a/tempest/lib/api_schema/response/compute/v2_47/servers.py
+++ b/tempest/lib/api_schema/response/compute/v2_47/servers.py
@@ -26,7 +26,7 @@
         'extra_specs': {
             'type': 'object',
             'patternProperties': {
-                '^[a-zA-Z0-9_\-\. :]+$': {'type': 'string'}
+                r'^[a-zA-Z0-9_\-\. :]+$': {'type': 'string'}
             }
         }
     },
@@ -37,3 +37,19 @@
 get_server = copy.deepcopy(servers226.get_server)
 get_server['response_body']['properties']['server'][
     'properties'].update({'flavor': flavor})
+list_servers_detail = copy.deepcopy(servers226.list_servers_detail)
+list_servers_detail['response_body']['properties']['servers']['items'][
+    'properties'].update({'flavor': flavor})
+
+update_server = copy.deepcopy(servers226.update_server)
+update_server['response_body']['properties']['server'][
+    'properties'].update({'flavor': flavor})
+
+rebuild_server = copy.deepcopy(servers226.rebuild_server)
+rebuild_server['response_body']['properties']['server'][
+    'properties'].update({'flavor': flavor})
+
+rebuild_server_with_admin_pass = copy.deepcopy(
+    servers226.rebuild_server_with_admin_pass)
+rebuild_server_with_admin_pass['response_body']['properties']['server'][
+    'properties'].update({'flavor': flavor})
diff --git a/tempest/lib/api_schema/response/compute/v2_53/__init__.py b/tempest/lib/api_schema/response/compute/v2_53/__init__.py
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/tempest/lib/api_schema/response/compute/v2_53/__init__.py
diff --git a/tempest/lib/api_schema/response/compute/v2_53/services.py b/tempest/lib/api_schema/response/compute/v2_53/services.py
new file mode 100644
index 0000000..aa132a9
--- /dev/null
+++ b/tempest/lib/api_schema/response/compute/v2_53/services.py
@@ -0,0 +1,70 @@
+# Copyright 2018 AT&T Corporation.
+# All rights reserved.
+#
+#    Licensed under the Apache License, Version 2.0 (the "License"); you may
+#    not use this file except in compliance with the License. You may obtain
+#    a copy of the License at
+#
+#         http://www.apache.org/licenses/LICENSE-2.0
+#
+#    Unless required by applicable law or agreed to in writing, software
+#    distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+#    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+#    License for the specific language governing permissions and limitations
+#    under the License.
+
+import copy
+
+from tempest.lib.api_schema.response.compute.v2_1 import parameter_types
+from tempest.lib.api_schema.response.compute.v2_11 import services \
+    as servicesv211
+
+# ***************** Schemas changed in microversion 2.53 *****************
+
+# NOTE(felipemonteiro): This is schema for microversion 2.53 which includes:
+#
+# * changing the service 'id' to 'string' type only
+# * adding update_service which supersedes enable_service, disable_service,
+#   disable_log_reason, update_forced_down.
+
+list_services = copy.deepcopy(servicesv211.list_services)
+# The ID of the service is a uuid, so v2.1 pattern does not apply.
+list_services['response_body']['properties']['services']['items'][
+    'properties']['id'] = {'type': 'string', 'format': 'uuid'}
+
+update_service = {
+    'status_code': [200],
+    'response_body': {
+        'type': 'object',
+        'properties': {
+            'service': {
+                'type': 'object',
+                'properties': {
+                    'id': {'type': 'string', 'format': 'uuid'},
+                    'binary': {'type': 'string'},
+                    'disabled_reason': {'type': 'string'},
+                    'host': {'type': 'string'},
+                    'state': {'type': 'string'},
+                    'status': {'type': 'string'},
+                    'updated_at': parameter_types.date_time,
+                    'zone': {'type': 'string'},
+                    'forced_down': {'type': 'boolean'}
+                },
+                'additionalProperties': False,
+                'required': ['id', 'binary', 'disabled_reason', 'host',
+                             'state', 'status', 'updated_at', 'zone',
+                             'forced_down']
+            }
+        },
+        'additionalProperties': False,
+        'required': ['service']
+    }
+}
+
+# **** Schemas unchanged in microversion 2.53 since microversion 2.11 ****
+# Note(felipemonteiro): Below are the unchanged schema in this microversion. We
+# need to keep this schema in this file to have the generic way to select the
+# right schema based on self.schema_versions_info mapping in service client.
+enable_disable_service = copy.deepcopy(servicesv211.enable_disable_service)
+update_forced_down = copy.deepcopy(servicesv211.update_forced_down)
+disable_log_reason = copy.deepcopy(servicesv211.disable_log_reason)
diff --git a/tempest/lib/api_schema/response/compute/v2_54/__init__.py b/tempest/lib/api_schema/response/compute/v2_54/__init__.py
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/tempest/lib/api_schema/response/compute/v2_54/__init__.py
diff --git a/tempest/lib/api_schema/response/compute/v2_54/servers.py b/tempest/lib/api_schema/response/compute/v2_54/servers.py
new file mode 100644
index 0000000..c084696
--- /dev/null
+++ b/tempest/lib/api_schema/response/compute/v2_54/servers.py
@@ -0,0 +1,49 @@
+#    Licensed under the Apache License, Version 2.0 (the "License"); you may
+#    not use this file except in compliance with the License. You may obtain
+#    a copy of the License at
+#
+#         http://www.apache.org/licenses/LICENSE-2.0
+#
+#    Unless required by applicable law or agreed to in writing, software
+#    distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+#    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+#    License for the specific language governing permissions and limitations
+#    under the License.
+
+import copy
+
+from tempest.lib.api_schema.response.compute.v2_47 import servers as servers247
+# ****** Schemas changed in microversion 2.54 *****************
+
+# Note(gmann): This is schema for microversion 2.54 which includes the
+# 'key_name' in the Response body of the following APIs:
+#    - ``POST '/servers/{server_id}/action (rebuild)``
+
+key_name = {
+    'oneOf': [
+        {'type': 'string', 'minLength': 1, 'maxLength': 255},
+        {'type': 'null'},
+    ]
+}
+
+rebuild_server = copy.deepcopy(servers247.rebuild_server)
+rebuild_server['response_body']['properties']['server'][
+    'properties'].update({'key_name': key_name})
+rebuild_server['response_body']['properties']['server'][
+    'required'].append('key_name')
+
+rebuild_server_with_admin_pass = copy.deepcopy(
+    servers247.rebuild_server_with_admin_pass)
+rebuild_server_with_admin_pass['response_body']['properties']['server'][
+    'properties'].update({'key_name': key_name})
+rebuild_server_with_admin_pass['response_body']['properties']['server'][
+    'required'].append('key_name')
+
+# ****** Schemas unchanged in microversion 2.54 since microversion 2.47 ***
+
+# NOTE(gmann): Below are the unchanged schema in this microversion. We need
+# to keep this schema in this file to have the generic way to select the
+# right schema based on self.schema_versions_info mapping in service client.
+get_server = copy.deepcopy(servers247.get_server)
+list_servers_detail = copy.deepcopy(servers247.list_servers_detail)
+update_server = copy.deepcopy(servers247.update_server)
diff --git a/tempest/lib/api_schema/response/compute/v2_55/__init__.py b/tempest/lib/api_schema/response/compute/v2_55/__init__.py
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/tempest/lib/api_schema/response/compute/v2_55/__init__.py
diff --git a/tempest/lib/api_schema/response/compute/v2_55/flavors.py b/tempest/lib/api_schema/response/compute/v2_55/flavors.py
new file mode 100644
index 0000000..823190a
--- /dev/null
+++ b/tempest/lib/api_schema/response/compute/v2_55/flavors.py
@@ -0,0 +1,112 @@
+# Copyright 2018 NEC Corporation.  All rights reserved.
+#
+#    Licensed under the Apache License, Version 2.0 (the "License"); you may
+#    not use this file except in compliance with the License. You may obtain
+#    a copy of the License at
+#
+#         http://www.apache.org/licenses/LICENSE-2.0
+#
+#    Unless required by applicable law or agreed to in writing, software
+#    distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+#    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+#    License for the specific language governing permissions and limitations
+#    under the License.
+
+from tempest.lib.api_schema.response.compute.v2_1 import parameter_types
+
+# Note(gmann): This is schema for microversion 2.55 which includes the
+# following changes:
+# Add new PUT API
+# Adds a ``description`` field to the following APIs response:
+#    - ``GET /flavors``
+#    - ``GET /flavors/detail``
+#    - ``GET /flavors/{flavor_id}``
+#    - ``POST /flavors``
+
+flavor_description = {
+    'type': ['string', 'null'],
+    'minLength': 0, 'maxLength': 65535
+}
+
+list_flavors = {
+    'status_code': [200],
+    'response_body': {
+        'type': 'object',
+        'properties': {
+            'flavors': {
+                'type': 'array',
+                'items': {
+                    'type': 'object',
+                    'properties': {
+                        'name': {'type': 'string'},
+                        'links': parameter_types.links,
+                        'id': {'type': 'string'},
+                        'description': flavor_description
+                    },
+                    'additionalProperties': False,
+                    'required': ['name', 'links', 'id', 'description']
+                }
+            },
+            'flavors_links': parameter_types.links
+        },
+        'additionalProperties': False,
+        # NOTE(gmann): flavors_links attribute is not necessary
+        # to be present always So it is not 'required'.
+        'required': ['flavors']
+    }
+}
+
+common_flavor_info = {
+    'type': 'object',
+    'properties': {
+        'name': {'type': 'string'},
+        'links': parameter_types.links,
+        'ram': {'type': 'integer'},
+        'vcpus': {'type': 'integer'},
+        # 'swap' attributes comes as integer value but if it is empty
+        # it comes as "". So defining type of as string and integer.
+        'swap': {'type': ['integer', 'string']},
+        'disk': {'type': 'integer'},
+        'id': {'type': 'string'},
+        'OS-FLV-DISABLED:disabled': {'type': 'boolean'},
+        'os-flavor-access:is_public': {'type': 'boolean'},
+        'rxtx_factor': {'type': 'number'},
+        'OS-FLV-EXT-DATA:ephemeral': {'type': 'integer'},
+        'description': flavor_description
+    },
+    'additionalProperties': False,
+    # 'OS-FLV-DISABLED', 'os-flavor-access', 'rxtx_factor' and
+    # 'OS-FLV-EXT-DATA' are API extensions. So they are not 'required'.
+    'required': ['name', 'links', 'ram', 'vcpus', 'swap', 'disk', 'id',
+                 'description']
+}
+
+list_flavors_details = {
+    'status_code': [200],
+    'response_body': {
+        'type': 'object',
+        'properties': {
+            'flavors': {
+                'type': 'array',
+                'items': common_flavor_info
+            },
+            # NOTE(gmann): flavors_links attribute is not necessary
+            # to be present always So it is not 'required'.
+            'flavors_links': parameter_types.links
+        },
+        'additionalProperties': False,
+        'required': ['flavors']
+    }
+}
+
+create_update_get_flavor_details = {
+    'status_code': [200],
+    'response_body': {
+        'type': 'object',
+        'properties': {
+            'flavor': common_flavor_info
+        },
+        'additionalProperties': False,
+        'required': ['flavor']
+    }
+}
diff --git a/tempest/lib/api_schema/response/compute/v2_57/__init__.py b/tempest/lib/api_schema/response/compute/v2_57/__init__.py
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/tempest/lib/api_schema/response/compute/v2_57/__init__.py
diff --git a/tempest/lib/api_schema/response/compute/v2_57/servers.py b/tempest/lib/api_schema/response/compute/v2_57/servers.py
new file mode 100644
index 0000000..ed1ca7d
--- /dev/null
+++ b/tempest/lib/api_schema/response/compute/v2_57/servers.py
@@ -0,0 +1,53 @@
+#    Licensed under the Apache License, Version 2.0 (the "License"); you may
+#    not use this file except in compliance with the License. You may obtain
+#    a copy of the License at
+#
+#         http://www.apache.org/licenses/LICENSE-2.0
+#
+#    Unless required by applicable law or agreed to in writing, software
+#    distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+#    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+#    License for the specific language governing permissions and limitations
+#    under the License.
+
+import copy
+
+from tempest.lib.api_schema.response.compute.v2_54 import servers as servers254
+# ****** Schemas changed in microversion 2.57 *****************
+
+# Note(gmann): This is schema for microversion 2.57 which includes the
+# 'user_data' in the Response body of the following APIs:
+#    - ``POST '/servers/{server_id}/action (rebuild)``
+
+user_data = {
+    'oneOf': [
+        {
+            'type': 'string',
+            'format': 'base64',
+            'maxLength': 65535
+        },
+        {'type': 'null'}
+    ]
+}
+
+rebuild_server = copy.deepcopy(servers254.rebuild_server)
+rebuild_server['response_body']['properties']['server'][
+    'properties'].update({'user_data': user_data})
+rebuild_server['response_body']['properties']['server'][
+    'required'].append('user_data')
+
+rebuild_server_with_admin_pass = copy.deepcopy(
+    servers254.rebuild_server_with_admin_pass)
+rebuild_server_with_admin_pass['response_body']['properties']['server'][
+    'properties'].update({'user_data': user_data})
+rebuild_server_with_admin_pass['response_body']['properties']['server'][
+    'required'].append('user_data')
+
+# ****** Schemas unchanged in microversion 2.57 since microversion 2.54 ***
+
+# NOTE(gmann): Below are the unchanged schema in this microversion. We need
+# to keeo this schema in this file to have the generic way to select the
+# right schema based on self.schema_versions_info mapping in service client.
+get_server = copy.deepcopy(servers254.get_server)
+list_servers_detail = copy.deepcopy(servers254.list_servers_detail)
+update_server = copy.deepcopy(servers254.update_server)
diff --git a/tempest/lib/api_schema/response/compute/v2_61/__init__.py b/tempest/lib/api_schema/response/compute/v2_61/__init__.py
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/tempest/lib/api_schema/response/compute/v2_61/__init__.py
diff --git a/tempest/lib/api_schema/response/compute/v2_61/flavors.py b/tempest/lib/api_schema/response/compute/v2_61/flavors.py
new file mode 100644
index 0000000..381fb64
--- /dev/null
+++ b/tempest/lib/api_schema/response/compute/v2_61/flavors.py
@@ -0,0 +1,102 @@
+# Copyright 2018 NEC Corporation.  All rights reserved.
+#
+#    Licensed under the Apache License, Version 2.0 (the "License"); you may
+#    not use this file except in compliance with the License. You may obtain
+#    a copy of the License at
+#
+#         http://www.apache.org/licenses/LICENSE-2.0
+#
+#    Unless required by applicable law or agreed to in writing, software
+#    distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+#    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+#    License for the specific language governing permissions and limitations
+#    under the License.
+
+import copy
+
+from tempest.lib.api_schema.response.compute.v2_1 import parameter_types
+from tempest.lib.api_schema.response.compute.v2_55 import flavors \
+    as flavorsv255
+
+# ****** Schemas changed in microversion 2.61 *****************
+
+# Note(gmann): This is schema for microversion 2.61 which includes the
+# Flavor extra_specs in the Response body of the following APIs:
+#    - ``PUT /flavors/{flavor_id}``
+#    - ``GET /flavors/detail``
+#    - ``GET /flavors/{flavor_id}``
+#    - ``POST /flavors``
+
+flavor_description = {
+    'type': ['string', 'null'],
+    'minLength': 0, 'maxLength': 65535
+}
+
+flavor_extra_specs = {
+    'type': 'object',
+    'patternProperties': {
+        '^[a-zA-Z0-9-_:. ]{1,255}$': {'type': 'string'}
+    }
+}
+
+common_flavor_info = {
+    'type': 'object',
+    'properties': {
+        'name': {'type': 'string'},
+        'links': parameter_types.links,
+        'ram': {'type': 'integer'},
+        'vcpus': {'type': 'integer'},
+        # 'swap' attributes comes as integer value but if it is empty
+        # it comes as "". So defining type of as string and integer.
+        'swap': {'type': ['integer', 'string']},
+        'disk': {'type': 'integer'},
+        'id': {'type': 'string'},
+        'OS-FLV-DISABLED:disabled': {'type': 'boolean'},
+        'os-flavor-access:is_public': {'type': 'boolean'},
+        'rxtx_factor': {'type': 'number'},
+        'OS-FLV-EXT-DATA:ephemeral': {'type': 'integer'},
+        'description': flavor_description,
+        'extra_specs': flavor_extra_specs
+    },
+    'additionalProperties': False,
+    # 'OS-FLV-DISABLED', 'os-flavor-access', 'rxtx_factor' and
+    # 'OS-FLV-EXT-DATA' are API extensions. so they are not 'required'.
+    'required': ['name', 'links', 'ram', 'vcpus', 'swap', 'disk', 'id',
+                 'description']
+}
+
+list_flavors_details = {
+    'status_code': [200],
+    'response_body': {
+        'type': 'object',
+        'properties': {
+            'flavors': {
+                'type': 'array',
+                'items': common_flavor_info
+            },
+            # NOTE(gmann): flavors_links attribute is not necessary
+            # to be present always so it is not 'required'.
+            'flavors_links': parameter_types.links
+        },
+        'additionalProperties': False,
+        'required': ['flavors']
+    }
+}
+
+create_update_get_flavor_details = {
+    'status_code': [200],
+    'response_body': {
+        'type': 'object',
+        'properties': {
+            'flavor': common_flavor_info
+        },
+        'additionalProperties': False,
+        'required': ['flavor']
+    }
+}
+
+# ****** Schemas unchanged in microversion 2.61 since microversion 2.55 ***
+# Note(gmann): Below are the unchanged schema in this microversion. We need
+# to keep this schema in this file to have the generic way to select the
+# right schema based on self.schema_versions_info mapping in service client.
+list_flavors = copy.deepcopy(flavorsv255.list_flavors)
diff --git a/tempest/lib/api_schema/response/compute/v2_63/__init__.py b/tempest/lib/api_schema/response/compute/v2_63/__init__.py
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/tempest/lib/api_schema/response/compute/v2_63/__init__.py
diff --git a/tempest/lib/api_schema/response/compute/v2_63/servers.py b/tempest/lib/api_schema/response/compute/v2_63/servers.py
new file mode 100644
index 0000000..5cdaf54
--- /dev/null
+++ b/tempest/lib/api_schema/response/compute/v2_63/servers.py
@@ -0,0 +1,65 @@
+#    Licensed under the Apache License, Version 2.0 (the "License"); you may
+#    not use this file except in compliance with the License. You may obtain
+#    a copy of the License at
+#
+#         http://www.apache.org/licenses/LICENSE-2.0
+#
+#    Unless required by applicable law or agreed to in writing, software
+#    distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+#    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+#    License for the specific language governing permissions and limitations
+#    under the License.
+
+import copy
+
+from tempest.lib.api_schema.response.compute.v2_26 import servers as servers226
+from tempest.lib.api_schema.response.compute.v2_54 import servers as servers254
+from tempest.lib.api_schema.response.compute.v2_57 import servers as servers257
+
+# Nova microversion 2.63 adds 'trusted_image_certificates' (a list of
+# certificate IDs) to the server rebuild and servers details responses.
+
+
+trusted_certs = {
+    'type': ['array', 'null'],
+    'minItems': 1,
+    'maxItems': 50,
+    'uniqueItems': True,
+    'items': {
+        'type': 'string',
+        'minLength': 1
+    }
+}
+# list response schema wasn't changed for v2.63 so use v2.26
+list_servers = copy.deepcopy(servers226.list_servers)
+
+list_servers_detail = copy.deepcopy(servers254.list_servers_detail)
+list_servers_detail['response_body']['properties']['servers']['items'][
+    'properties'].update({'trusted_image_certificates': trusted_certs})
+list_servers_detail['response_body']['properties']['servers']['items'][
+    'required'].append('trusted_image_certificates')
+
+rebuild_server = copy.deepcopy(servers257.rebuild_server)
+rebuild_server['response_body']['properties']['server'][
+    'properties'].update({'trusted_image_certificates': trusted_certs})
+rebuild_server['response_body']['properties']['server'][
+    'required'].append('trusted_image_certificates')
+
+rebuild_server_with_admin_pass = copy.deepcopy(
+    servers257.rebuild_server_with_admin_pass)
+rebuild_server_with_admin_pass['response_body']['properties']['server'][
+    'properties'].update({'trusted_image_certificates': trusted_certs})
+rebuild_server_with_admin_pass['response_body']['properties']['server'][
+    'required'].append('trusted_image_certificates')
+
+update_server = copy.deepcopy(servers254.update_server)
+update_server['response_body']['properties']['server'][
+    'properties'].update({'trusted_image_certificates': trusted_certs})
+update_server['response_body']['properties']['server'][
+    'required'].append('trusted_image_certificates')
+
+get_server = copy.deepcopy(servers254.get_server)
+get_server['response_body']['properties']['server'][
+    'properties'].update({'trusted_image_certificates': trusted_certs})
+get_server['response_body']['properties']['server'][
+    'required'].append('trusted_image_certificates')
diff --git a/tempest/lib/api_schema/response/compute/v2_9/servers.py b/tempest/lib/api_schema/response/compute/v2_9/servers.py
index e260e48..7df02d5 100644
--- a/tempest/lib/api_schema/response/compute/v2_9/servers.py
+++ b/tempest/lib/api_schema/response/compute/v2_9/servers.py
@@ -14,6 +14,7 @@
 
 import copy
 
+from tempest.lib.api_schema.response.compute.v2_1 import servers as servers_21
 from tempest.lib.api_schema.response.compute.v2_6 import servers
 
 list_servers = copy.deepcopy(servers.list_servers)
@@ -29,3 +30,22 @@
     'properties'].update({'locked': {'type': 'boolean'}})
 list_servers_detail['response_body']['properties']['servers']['items'][
     'required'].append('locked')
+
+update_server = copy.deepcopy(servers_21.update_server)
+update_server['response_body']['properties']['server'][
+    'properties'].update({'locked': {'type': 'boolean'}})
+update_server['response_body']['properties']['server'][
+    'required'].append('locked')
+
+rebuild_server = copy.deepcopy(servers_21.rebuild_server)
+rebuild_server['response_body']['properties']['server'][
+    'properties'].update({'locked': {'type': 'boolean'}})
+rebuild_server['response_body']['properties']['server'][
+    'required'].append('locked')
+
+rebuild_server_with_admin_pass = copy.deepcopy(
+    servers_21.rebuild_server_with_admin_pass)
+rebuild_server_with_admin_pass['response_body']['properties']['server'][
+    'properties'].update({'locked': {'type': 'boolean'}})
+rebuild_server_with_admin_pass['response_body']['properties']['server'][
+    'required'].append('locked')
diff --git a/tempest/lib/cli/output_parser.py b/tempest/lib/cli/output_parser.py
index a7d5e49..45d41c7 100644
--- a/tempest/lib/cli/output_parser.py
+++ b/tempest/lib/cli/output_parser.py
@@ -25,7 +25,7 @@
 LOG = logging.getLogger(__name__)
 
 
-delimiter_line = re.compile('^\+\-[\+\-]+\-\+$')
+delimiter_line = re.compile(r'^\+\-[\+\-]+\-\+$')
 
 
 def details_multiple(output_lines, with_label=False):
diff --git a/tempest/lib/cmd/check_uuid.py b/tempest/lib/cmd/check_uuid.py
index d1f0888..82fcd0b 100755
--- a/tempest/lib/cmd/check_uuid.py
+++ b/tempest/lib/cmd/check_uuid.py
@@ -358,5 +358,6 @@
                  "Run 'tox -v -e uuidgen' to automatically fix tests with\n"
                  "missing @decorators.idempotent_id decorators.")
 
+
 if __name__ == '__main__':
     run()
diff --git a/tempest/lib/common/jsonschema_validator.py b/tempest/lib/common/jsonschema_validator.py
index bbdf382..9a35b76 100644
--- a/tempest/lib/common/jsonschema_validator.py
+++ b/tempest/lib/common/jsonschema_validator.py
@@ -12,9 +12,11 @@
 #    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
 #    License for the specific language governing permissions and limitations
 #    under the License.
+import base64
 
 import jsonschema
 from oslo_utils import timeutils
+import six
 
 # JSON Schema validator and format checker used for JSON Schema validation
 JSONSCHEMA_VALIDATOR = jsonschema.Draft4Validator
@@ -37,3 +39,19 @@
         return False
     else:
         return True
+
+
+@jsonschema.FormatChecker.cls_checks('base64')
+def _validate_base64_format(instance):
+    try:
+        if isinstance(instance, six.text_type):
+            instance = instance.encode('utf-8')
+        base64.decodestring(instance)
+    except base64.binascii.Error:
+        return False
+    except TypeError:
+        # The name must be string type. If instance isn't string type, the
+        # TypeError will be raised at here.
+        return False
+
+    return True
diff --git a/tempest/lib/common/rest_client.py b/tempest/lib/common/rest_client.py
index 22276d4..bc9cfe2 100644
--- a/tempest/lib/common/rest_client.py
+++ b/tempest/lib/common/rest_client.py
@@ -416,6 +416,8 @@
                           resp_body=None, extra=None):
         if 'X-Auth-Token' in req_headers:
             req_headers['X-Auth-Token'] = '<omitted>'
+        if 'X-Subject-Token' in req_headers:
+            req_headers['X-Subject-Token'] = '<omitted>'
         # A shallow copy is sufficient
         resp_log = resp.copy()
         if 'x-subject-token' in resp_log:
diff --git a/tempest/lib/common/thread.py b/tempest/lib/common/thread.py
new file mode 100644
index 0000000..510fc36
--- /dev/null
+++ b/tempest/lib/common/thread.py
@@ -0,0 +1,29 @@
+# Copyright 2018 Red Hat, Inc.
+# All Rights Reserved.
+#
+#    Licensed under the Apache License, Version 2.0 (the "License"); you may
+#    not use this file except in compliance with the License. You may obtain
+#    a copy of the License at
+#
+#         http://www.apache.org/licenses/LICENSE-2.0
+#
+#    Unless required by applicable law or agreed to in writing, software
+#    distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+#    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+#    License for the specific language governing permissions and limitations
+#    under the License.
+
+# This make disable relative module import
+from __future__ import absolute_import
+
+
+import six
+
+if six.PY2:
+    # module thread is removed in Python 3
+    from thread import get_ident  # noqa: H237,F401
+
+else:
+    # On Python3 thread module has been deprecated and get_ident has been moved
+    # to threading module
+    from threading import get_ident  # noqa: F401
diff --git a/tempest/lib/services/compute/flavors_client.py b/tempest/lib/services/compute/flavors_client.py
index 0fb1991..2fad0a4 100644
--- a/tempest/lib/services/compute/flavors_client.py
+++ b/tempest/lib/services/compute/flavors_client.py
@@ -21,12 +21,21 @@
     as schema_access
 from tempest.lib.api_schema.response.compute.v2_1 import flavors_extra_specs \
     as schema_extra_specs
+from tempest.lib.api_schema.response.compute.v2_55 import flavors \
+    as schemav255
+from tempest.lib.api_schema.response.compute.v2_61 import flavors \
+    as schemav261
 from tempest.lib.common import rest_client
 from tempest.lib.services.compute import base_compute_client
 
 
 class FlavorsClient(base_compute_client.BaseComputeClient):
 
+    schema_versions_info = [
+        {'min': None, 'max': '2.54', 'schema': schema},
+        {'min': '2.55', 'max': '2.60', 'schema': schemav255},
+        {'min': '2.61', 'max': None, 'schema': schemav261}]
+
     def list_flavors(self, detail=False, **params):
         """Lists flavors.
 
@@ -36,11 +45,12 @@
         https://developer.openstack.org/api-ref/compute/#list-flavors-with-details
         """
         url = 'flavors'
-        _schema = schema.list_flavors
-
+        schema = self.get_schema(self.schema_versions_info)
         if detail:
             url += '/detail'
             _schema = schema.list_flavors_details
+        else:
+            _schema = schema.list_flavors
         if params:
             url += '?%s' % urllib.urlencode(params)
 
@@ -58,7 +68,9 @@
         """
         resp, body = self.get("flavors/%s" % flavor_id)
         body = json.loads(body)
-        self.validate_response(schema.create_get_flavor_details, resp, body)
+        schema = self.get_schema(self.schema_versions_info)
+        self.validate_response(schema.create_update_get_flavor_details,
+                               resp, body)
         return rest_client.ResponseBody(resp, body)
 
     def create_flavor(self, **kwargs):
@@ -77,7 +89,25 @@
         resp, body = self.post('flavors', post_body)
 
         body = json.loads(body)
-        self.validate_response(schema.create_get_flavor_details, resp, body)
+        schema = self.get_schema(self.schema_versions_info)
+        self.validate_response(schema.create_update_get_flavor_details,
+                               resp, body)
+        return rest_client.ResponseBody(resp, body)
+
+    def update_flavor(self, flavor_id, **kwargs):
+        """Uodate the flavor or instance type.
+
+        For a full list of available parameters, please refer to the official
+        API reference:
+        https://developer.openstack.org/api-ref/compute/#update-flavor-description
+        """
+        put_body = json.dumps({'flavor': kwargs})
+        resp, body = self.put("flavors/%s" % flavor_id, put_body)
+
+        body = json.loads(body)
+        schema = self.get_schema(self.schema_versions_info)
+        self.validate_response(schema.create_update_get_flavor_details,
+                               resp, body)
         return rest_client.ResponseBody(resp, body)
 
     def delete_flavor(self, flavor_id):
@@ -175,7 +205,8 @@
         """
         resp, body = self.delete('flavors/%s/os-extra_specs/%s' %
                                  (flavor_id, key))
-        self.validate_response(schema.unset_flavor_extra_specs, resp, body)
+        self.validate_response(schema_extra_specs.unset_flavor_extra_specs,
+                               resp, body)
         return rest_client.ResponseBody(resp, body)
 
     def list_flavor_access(self, flavor_id):
diff --git a/tempest/lib/services/compute/servers_client.py b/tempest/lib/services/compute/servers_client.py
index 09bccab..0314356 100644
--- a/tempest/lib/services/compute/servers_client.py
+++ b/tempest/lib/services/compute/servers_client.py
@@ -29,7 +29,10 @@
 from tempest.lib.api_schema.response.compute.v2_3 import servers as schemav23
 from tempest.lib.api_schema.response.compute.v2_47 import servers as schemav247
 from tempest.lib.api_schema.response.compute.v2_48 import servers as schemav248
+from tempest.lib.api_schema.response.compute.v2_54 import servers as schemav254
+from tempest.lib.api_schema.response.compute.v2_57 import servers as schemav257
 from tempest.lib.api_schema.response.compute.v2_6 import servers as schemav26
+from tempest.lib.api_schema.response.compute.v2_63 import servers as schemav263
 from tempest.lib.api_schema.response.compute.v2_9 import servers as schemav29
 from tempest.lib.common import rest_client
 from tempest.lib.services.compute import base_compute_client
@@ -47,7 +50,10 @@
         {'min': '2.19', 'max': '2.25', 'schema': schemav219},
         {'min': '2.26', 'max': '2.46', 'schema': schemav226},
         {'min': '2.47', 'max': '2.47', 'schema': schemav247},
-        {'min': '2.48', 'max': None, 'schema': schemav248}]
+        {'min': '2.48', 'max': '2.53', 'schema': schemav248},
+        {'min': '2.54', 'max': '2.56', 'schema': schemav254},
+        {'min': '2.57', 'max': '2.62', 'schema': schemav257},
+        {'min': '2.63', 'max': None, 'schema': schemav263}]
 
     def __init__(self, auth_provider, service, region,
                  enable_instance_password=True, **kwargs):
@@ -156,11 +162,11 @@
 
         url = 'servers'
         schema = self.get_schema(self.schema_versions_info)
-        _schema = schema.list_servers
-
         if detail:
             url += '/detail'
             _schema = schema.list_servers_detail
+        else:
+            _schema = schema.list_servers
         if params:
             url += '?%s' % urllib.urlencode(params)
 
diff --git a/tempest/lib/services/compute/services_client.py b/tempest/lib/services/compute/services_client.py
index b046c35..d52de3a 100644
--- a/tempest/lib/services/compute/services_client.py
+++ b/tempest/lib/services/compute/services_client.py
@@ -20,6 +20,8 @@
 from tempest.lib.api_schema.response.compute.v2_1 import services as schema
 from tempest.lib.api_schema.response.compute.v2_11 import services \
     as schemav211
+from tempest.lib.api_schema.response.compute.v2_53 import services \
+    as schemav253
 from tempest.lib.common import rest_client
 from tempest.lib.services.compute import base_compute_client
 
@@ -28,7 +30,8 @@
 
     schema_versions_info = [
         {'min': None, 'max': '2.10', 'schema': schema},
-        {'min': '2.11', 'max': None, 'schema': schemav211}]
+        {'min': '2.11', 'max': '2.52', 'schema': schemav211},
+        {'min': '2.53', 'max': None, 'schema': schemav253}]
 
     def list_services(self, **params):
         """Lists all running Compute services for a tenant.
@@ -47,9 +50,30 @@
         self.validate_response(_schema.list_services, resp, body)
         return rest_client.ResponseBody(resp, body)
 
+    def update_service(self, service_id, **kwargs):
+        """Update a compute service.
+
+        Update a compute service to enable or disable scheduling, including
+        recording a reason why a compute service was disabled from scheduling.
+
+        This API is available starting with microversion 2.53.
+
+        For a full list of available parameters, please refer to the official
+        API reference:
+        https://developer.openstack.org/api-ref/compute/#update-compute-service
+        """
+        put_body = json.dumps(kwargs)
+        resp, body = self.put('os-services/%s' % service_id, put_body)
+        body = json.loads(body)
+        _schema = self.get_schema(self.schema_versions_info)
+        self.validate_response(_schema.update_service, resp, body)
+        return rest_client.ResponseBody(resp, body)
+
     def enable_service(self, **kwargs):
         """Enable service on a host.
 
+        ``update_service`` supersedes this API starting with microversion 2.53.
+
         For a full list of available parameters, please refer to the official
         API reference:
         https://developer.openstack.org/api-ref/compute/#enable-scheduling-for-a-compute-service
@@ -63,6 +87,8 @@
     def disable_service(self, **kwargs):
         """Disable service on a host.
 
+        ``update_service`` supersedes this API starting with microversion 2.53.
+
         For a full list of available parameters, please refer to the official
         API reference:
         https://developer.openstack.org/api-ref/compute/#disable-scheduling-for-a-compute-service
@@ -76,6 +102,8 @@
     def disable_log_reason(self, **kwargs):
         """Disables scheduling for a Compute service and logs reason.
 
+        ``update_service`` supersedes this API starting with microversion 2.53.
+
         For a full list of available parameters, please refer to the official
         API reference:
         https://developer.openstack.org/api-ref/compute/#disable-scheduling-for-a-compute-service-and-log-disabled-reason
@@ -89,6 +117,8 @@
     def update_forced_down(self, **kwargs):
         """Set or unset ``forced_down`` flag for the service.
 
+        ``update_service`` supersedes this API starting with microversion 2.53.
+
         For a full list of available parameters, please refer to the official
         API reference:
         https://developer.openstack.org/api-ref/compute/#update-forced-down
diff --git a/tempest/lib/services/network/agents_client.py b/tempest/lib/services/network/agents_client.py
index 9bdf090..5068121 100644
--- a/tempest/lib/services/network/agents_client.py
+++ b/tempest/lib/services/network/agents_client.py
@@ -18,35 +18,62 @@
 class AgentsClient(base.BaseNetworkClient):
 
     def update_agent(self, agent_id, **kwargs):
-        """Update agent."""
-        # TODO(piyush): Current api-site doesn't contain this API description.
-        # After fixing the api-site, we need to fix here also for putting the
-        # link to api-site.
-        # LP: https://bugs.launchpad.net/openstack-api-site/+bug/1526673
+        """Update an agent.
+
+        For a full list of available parameters, please refer to the official
+        API reference:
+        https://developer.openstack.org/api-ref/network/v2/#update-agent
+        """
         uri = '/agents/%s' % agent_id
         return self.update_resource(uri, kwargs)
 
     def show_agent(self, agent_id, **fields):
+        """Show details for an agent.
+
+        For a full list of available parameters, please refer to the official
+        API reference:
+        https://developer.openstack.org/api-ref/network/v2/#show-agent-details
+        """
         uri = '/agents/%s' % agent_id
         return self.show_resource(uri, **fields)
 
     def list_agents(self, **filters):
+        """List all agents.
+
+        For a full list of available parameters, please refer to the official
+        API reference:
+        https://developer.openstack.org/api-ref/network/v2/#list-all-agents
+        """
         uri = '/agents'
         return self.list_resources(uri, **filters)
 
     def list_routers_on_l3_agent(self, agent_id):
+        """List routers that an l3 agent hosts.
+
+        For a full list of available parameters, please refer to the official
+        API reference:
+        https://developer.openstack.org/api-ref/network/v2/#list-routers-hosted-by-an-l3-agent
+        """
         uri = '/agents/%s/l3-routers' % agent_id
         return self.list_resources(uri)
 
     def create_router_on_l3_agent(self, agent_id, **kwargs):
-        # TODO(piyush): Current api-site doesn't contain this API description.
-        # After fixing the api-site, we need to fix here also for putting the
-        # link to api-site.
-        # LP: https://bugs.launchpad.net/openstack-api-site/+bug/1526670
+        """Add a router to an l3 agent.
+
+        For a full list of available parameters, please refer to the official
+        API reference:
+        https://developer.openstack.org/api-ref/network/v2/#schedule-router-to-an-l3-agent
+        """
         uri = '/agents/%s/l3-routers' % agent_id
         return self.create_resource(uri, kwargs, expect_empty_body=True)
 
     def delete_router_from_l3_agent(self, agent_id, router_id):
+        """Remove a router to an l3 agent.
+
+        For a full list of available parameters, please refer to the official
+        API reference:
+        https://developer.openstack.org/api-ref/network/v2/#remove-l3-router-from-an-l3-agent
+        """
         uri = '/agents/%s/l3-routers/%s' % (agent_id, router_id)
         return self.delete_resource(uri)
 
@@ -60,9 +87,11 @@
         return self.delete_resource(uri)
 
     def add_dhcp_agent_to_network(self, agent_id, **kwargs):
-        # TODO(piyush): Current api-site doesn't contain this API description.
-        # After fixing the api-site, we need to fix here also for putting the
-        # link to api-site.
-        # LP: https://bugs.launchpad.net/openstack-api-site/+bug/1526212
+        """Schedule a network to a DHCP agent.
+
+        For a full list of available parameters, please refer to the official
+        API reference:
+        https://developer.openstack.org/api-ref/network/v2/#schedule-a-network-to-a-dhcp-agent
+        """
         uri = '/agents/%s/dhcp-networks' % agent_id
         return self.create_resource(uri, kwargs, expect_empty_body=True)
diff --git a/tempest/lib/services/volume/v1/encryption_types_client.py b/tempest/lib/services/volume/v1/encryption_types_client.py
index 0fac6bd..1fde79f 100644
--- a/tempest/lib/services/volume/v1/encryption_types_client.py
+++ b/tempest/lib/services/volume/v1/encryption_types_client.py
@@ -38,7 +38,7 @@
     def show_encryption_type(self, volume_type_id):
         """Get the volume encryption type for the specified volume type.
 
-        volume_type_id: Id of volume_type.
+        :param volume_type_id: Id of volume type.
         """
         url = "/types/%s/encryption" % volume_type_id
         resp, body = self.get(url)
@@ -61,7 +61,7 @@
         return rest_client.ResponseBody(resp, body)
 
     def delete_encryption_type(self, volume_type_id):
-        """Delete the encryption type for the specified volume-type."""
+        """Delete the encryption type for the specified volume type."""
         resp, body = self.delete(
             "/types/%s/encryption/provider" % volume_type_id)
         self.expected_success(202, resp.status)
diff --git a/tempest/lib/services/volume/v2/availability_zone_client.py b/tempest/lib/services/volume/v2/availability_zone_client.py
index bb4a357..bdb2304 100644
--- a/tempest/lib/services/volume/v2/availability_zone_client.py
+++ b/tempest/lib/services/volume/v2/availability_zone_client.py
@@ -13,16 +13,11 @@
 #    License for the specific language governing permissions and limitations
 #    under the License.
 
-from oslo_serialization import jsonutils as json
+from debtcollector import moves
 
-from tempest.lib.common import rest_client
+from tempest.lib.services.volume.v3 import availability_zone_client
 
 
-class AvailabilityZoneClient(rest_client.RestClient):
-    api_version = "v2"
-
-    def list_availability_zones(self):
-        resp, body = self.get('os-availability-zone')
-        body = json.loads(body)
-        self.expected_success(200, resp.status)
-        return rest_client.ResponseBody(resp, body)
+AvailabilityZoneClient = moves.moved_class(
+    availability_zone_client.AvailabilityZoneClient, 'AvailabilityZoneClient',
+    __name__, version="Rocky", removal_version='?')
diff --git a/tempest/lib/services/volume/v2/backups_client.py b/tempest/lib/services/volume/v2/backups_client.py
index adfa6a6..80b3631 100644
--- a/tempest/lib/services/volume/v2/backups_client.py
+++ b/tempest/lib/services/volume/v2/backups_client.py
@@ -12,108 +12,11 @@
 #    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
 #    License for the specific language governing permissions and limitations
 #    under the License.
+from debtcollector import moves
 
-from oslo_serialization import jsonutils as json
-from six.moves.urllib import parse as urllib
-
-from tempest.lib.common import rest_client
-from tempest.lib import exceptions as lib_exc
-from tempest.lib.services.volume import base_client
+from tempest.lib.services.volume.v3 import backups_client
 
 
-class BackupsClient(base_client.BaseClient):
-    """Volume V2 Backups client"""
-    api_version = "v2"
-
-    def create_backup(self, **kwargs):
-        """Creates a backup of volume.
-
-        For a full list of available parameters, please refer to the official
-        API reference:
-        https://developer.openstack.org/api-ref/block-storage/v2/index.html#create-backup
-        """
-        post_body = json.dumps({'backup': kwargs})
-        resp, body = self.post('backups', post_body)
-        body = json.loads(body)
-        self.expected_success(202, resp.status)
-        return rest_client.ResponseBody(resp, body)
-
-    def restore_backup(self, backup_id, **kwargs):
-        """Restore volume from backup.
-
-        For a full list of available parameters, please refer to the official
-        API reference:
-        https://developer.openstack.org/api-ref/block-storage/v2/index.html#restore-backup
-        """
-        post_body = json.dumps({'restore': kwargs})
-        resp, body = self.post('backups/%s/restore' % (backup_id), post_body)
-        body = json.loads(body)
-        self.expected_success(202, resp.status)
-        return rest_client.ResponseBody(resp, body)
-
-    def delete_backup(self, backup_id):
-        """Delete a backup of volume."""
-        resp, body = self.delete('backups/%s' % backup_id)
-        self.expected_success(202, resp.status)
-        return rest_client.ResponseBody(resp, body)
-
-    def show_backup(self, backup_id):
-        """Returns the details of a single backup."""
-        url = "backups/%s" % backup_id
-        resp, body = self.get(url)
-        body = json.loads(body)
-        self.expected_success(200, resp.status)
-        return rest_client.ResponseBody(resp, body)
-
-    def list_backups(self, detail=False, **params):
-        """List all the tenant's backups.
-
-        For a full list of available parameters, please refer to the official
-        API reference:
-        http://developer.openstack.org/api-ref/block-storage/v2/#list-backups
-        http://developer.openstack.org/api-ref/block-storage/v2/#list-backups-with-details
-        """
-        url = "backups"
-        if detail:
-            url += "/detail"
-        if params:
-            url += '?%s' % urllib.urlencode(params)
-        resp, body = self.get(url)
-        body = json.loads(body)
-        self.expected_success(200, resp.status)
-        return rest_client.ResponseBody(resp, body)
-
-    def export_backup(self, backup_id):
-        """Export backup metadata record."""
-        url = "backups/%s/export_record" % backup_id
-        resp, body = self.get(url)
-        body = json.loads(body)
-        self.expected_success(200, resp.status)
-        return rest_client.ResponseBody(resp, body)
-
-    def import_backup(self, **kwargs):
-        """Import backup metadata record."""
-        post_body = json.dumps({'backup-record': kwargs})
-        resp, body = self.post("backups/import_record", post_body)
-        body = json.loads(body)
-        self.expected_success(201, resp.status)
-        return rest_client.ResponseBody(resp, body)
-
-    def reset_backup_status(self, backup_id, status):
-        """Reset the specified backup's status."""
-        post_body = json.dumps({'os-reset_status': {"status": status}})
-        resp, body = self.post('backups/%s/action' % backup_id, post_body)
-        self.expected_success(202, resp.status)
-        return rest_client.ResponseBody(resp, body)
-
-    def is_resource_deleted(self, id):
-        try:
-            self.show_backup(id)
-        except lib_exc.NotFound:
-            return True
-        return False
-
-    @property
-    def resource_type(self):
-        """Returns the primary type of resource this client works with."""
-        return 'backup'
+BackupsClient = moves.moved_class(
+    backups_client.BackupsClient, 'BackupsClient',
+    __name__, version="Rocky", removal_version='?')
diff --git a/tempest/lib/services/volume/v2/capabilities_client.py b/tempest/lib/services/volume/v2/capabilities_client.py
index 240be13..d8cf806 100644
--- a/tempest/lib/services/volume/v2/capabilities_client.py
+++ b/tempest/lib/services/volume/v2/capabilities_client.py
@@ -13,23 +13,11 @@
 #    License for the specific language governing permissions and limitations
 #    under the License.
 
-from oslo_serialization import jsonutils as json
+from debtcollector import moves
 
-from tempest.lib.common import rest_client
+from tempest.lib.services.volume.v3 import capabilities_client
 
 
-class CapabilitiesClient(rest_client.RestClient):
-    api_version = "v2"
-
-    def show_backend_capabilities(self, host):
-        """Shows capabilities for a storage back end.
-
-        For a full list of available parameters, please refer to the official
-        API reference:
-        https://developer.openstack.org/api-ref/block-storage/v2/index.html#show-back-end-capabilities
-        """
-        url = 'capabilities/%s' % host
-        resp, body = self.get(url)
-        body = json.loads(body)
-        self.expected_success(200, resp.status)
-        return rest_client.ResponseBody(resp, body)
+CapabilitiesClient = moves.moved_class(
+    capabilities_client.CapabilitiesClient, 'CapabilitiesClient',
+    __name__, version="Queens", removal_version='?')
diff --git a/tempest/lib/services/volume/v2/encryption_types_client.py b/tempest/lib/services/volume/v2/encryption_types_client.py
index b99d1fe..875e59e 100644
--- a/tempest/lib/services/volume/v2/encryption_types_client.py
+++ b/tempest/lib/services/volume/v2/encryption_types_client.py
@@ -13,79 +13,11 @@
 #    License for the specific language governing permissions and limitations
 #    under the License.
 
-from oslo_serialization import jsonutils as json
+from debtcollector import moves
 
-from tempest.lib.common import rest_client
-from tempest.lib import exceptions as lib_exc
+from tempest.lib.services.volume.v3 import encryption_types_client
 
 
-class EncryptionTypesClient(rest_client.RestClient):
-    api_version = "v2"
-
-    def is_resource_deleted(self, id):
-        try:
-            body = self.show_encryption_type(id)
-            if not body:
-                return True
-        except lib_exc.NotFound:
-            return True
-        return False
-
-    @property
-    def resource_type(self):
-        """Returns the primary type of resource this client works with."""
-        return 'encryption-type'
-
-    def show_encryption_type(self, volume_type_id):
-        """Get the volume encryption type for the specified volume type.
-
-        volume_type_id: Id of volume_type.
-        """
-        url = "/types/%s/encryption" % volume_type_id
-        resp, body = self.get(url)
-        body = json.loads(body)
-        self.expected_success(200, resp.status)
-        return rest_client.ResponseBody(resp, body)
-
-    def show_encryption_specs_item(self, volume_type_id, key):
-        """Get the encryption specs item for the specified volume type."""
-        url = "/types/%s/encryption/%s" % (volume_type_id, key)
-        resp, body = self.get(url)
-        body = json.loads(body)
-        self.expected_success(200, resp.status)
-        return rest_client.ResponseBody(resp, body)
-
-    def create_encryption_type(self, volume_type_id, **kwargs):
-        """Create encryption type.
-
-        For a full list of available parameters, please refer to the official
-        API reference:
-        https://developer.openstack.org/api-ref/block-storage/v2/#create-an-encryption-type-for-v2
-        """
-        url = "/types/%s/encryption" % volume_type_id
-        post_body = json.dumps({'encryption': kwargs})
-        resp, body = self.post(url, post_body)
-        body = json.loads(body)
-        self.expected_success(200, resp.status)
-        return rest_client.ResponseBody(resp, body)
-
-    def delete_encryption_type(self, volume_type_id):
-        """Delete the encryption type for the specified volume-type."""
-        resp, body = self.delete(
-            "/types/%s/encryption/provider" % volume_type_id)
-        self.expected_success(202, resp.status)
-        return rest_client.ResponseBody(resp, body)
-
-    def update_encryption_type(self, volume_type_id, **kwargs):
-        """Update an encryption type for an existing volume type.
-
-        For a full list of available parameters, please refer to the official
-        API reference:
-        https://developer.openstack.org/api-ref/block-storage/v2/#update-an-encryption-type-for-v2
-        """
-        url = "/types/%s/encryption/provider" % volume_type_id
-        put_body = json.dumps({'encryption': kwargs})
-        resp, body = self.put(url, put_body)
-        body = json.loads(body)
-        self.expected_success(200, resp.status)
-        return rest_client.ResponseBody(resp, body)
+EncryptionTypesClient = moves.moved_class(
+    encryption_types_client.EncryptionTypesClient, 'EncryptionTypesClient',
+    __name__, version="Rocky", removal_version='?')
diff --git a/tempest/lib/services/volume/v2/extensions_client.py b/tempest/lib/services/volume/v2/extensions_client.py
index 09279d5..6316ef5 100644
--- a/tempest/lib/services/volume/v2/extensions_client.py
+++ b/tempest/lib/services/volume/v2/extensions_client.py
@@ -12,19 +12,11 @@
 #    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
 #    License for the specific language governing permissions and limitations
 #    under the License.
+from debtcollector import moves
 
-from oslo_serialization import jsonutils as json
-
-from tempest.lib.common import rest_client
+from tempest.lib.services.volume.v3 import extensions_client
 
 
-class ExtensionsClient(rest_client.RestClient):
-    """Volume V2 extensions client."""
-    api_version = "v2"
-
-    def list_extensions(self):
-        url = 'extensions'
-        resp, body = self.get(url)
-        body = json.loads(body)
-        self.expected_success(200, resp.status)
-        return rest_client.ResponseBody(resp, body)
+ExtensionsClient = moves.moved_class(
+    extensions_client.ExtensionsClient, 'ExtensionsClient',
+    __name__, version="Rocky", removal_version='?')
diff --git a/tempest/lib/services/volume/v2/hosts_client.py b/tempest/lib/services/volume/v2/hosts_client.py
index f44bda3..38f1b38 100644
--- a/tempest/lib/services/volume/v2/hosts_client.py
+++ b/tempest/lib/services/volume/v2/hosts_client.py
@@ -12,37 +12,11 @@
 #    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
 #    License for the specific language governing permissions and limitations
 #    under the License.
+from debtcollector import moves
 
-from oslo_serialization import jsonutils as json
-from six.moves.urllib import parse as urllib
-
-from tempest.lib.common import rest_client
+from tempest.lib.services.volume.v3 import hosts_client
 
 
-class HostsClient(rest_client.RestClient):
-    """Client class to send CRUD Volume V2 API requests"""
-    api_version = "v2"
-
-    def list_hosts(self, **params):
-        """Lists all hosts.
-
-        For a full list of available parameters, please refer to the official
-        API reference:
-        https://developer.openstack.org/api-ref/block-storage/v2/#list-all-hosts
-        """
-        url = 'os-hosts'
-        if params:
-            url += '?%s' % urllib.urlencode(params)
-
-        resp, body = self.get(url)
-        body = json.loads(body)
-        self.expected_success(200, resp.status)
-        return rest_client.ResponseBody(resp, body)
-
-    def show_host(self, host_name):
-        """Show host details."""
-        url = 'os-hosts/%s' % host_name
-        resp, body = self.get(url)
-        self.expected_success(200, resp.status)
-        body = json.loads(body)
-        return rest_client.ResponseBody(resp, body)
+HostsClient = moves.moved_class(
+    hosts_client.HostsClient, 'HostsClient',
+    __name__, version="Rocky", removal_version='?')
diff --git a/tempest/lib/services/volume/v2/limits_client.py b/tempest/lib/services/volume/v2/limits_client.py
index ce9fba9..a6b8c5a 100644
--- a/tempest/lib/services/volume/v2/limits_client.py
+++ b/tempest/lib/services/volume/v2/limits_client.py
@@ -12,21 +12,11 @@
 #    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
 #    License for the specific language governing permissions and limitations
 #    under the License.
+from debtcollector import moves
 
-from oslo_serialization import jsonutils as json
-
-from tempest.lib.common import rest_client
+from tempest.lib.services.volume.v3 import limits_client
 
 
-class LimitsClient(rest_client.RestClient):
-    """Volume V2 limits client."""
-
-    api_version = "v2"
-
-    def show_limits(self):
-        """Returns the details of a volume absolute limits."""
-        url = "limits"
-        resp, body = self.get(url)
-        body = json.loads(body)
-        self.expected_success(200, resp.status)
-        return rest_client.ResponseBody(resp, body)
+LimitsClient = moves.moved_class(
+    limits_client.LimitsClient, 'LimitsClient',
+    __name__, version="Rocky", removal_version='?')
diff --git a/tempest/lib/services/volume/v2/qos_client.py b/tempest/lib/services/volume/v2/qos_client.py
index 47d3914..b81384e 100644
--- a/tempest/lib/services/volume/v2/qos_client.py
+++ b/tempest/lib/services/volume/v2/qos_client.py
@@ -11,123 +11,11 @@
 #    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
 #    License for the specific language governing permissions and limitations
 #    under the License.
+from debtcollector import moves
 
-from oslo_serialization import jsonutils as json
-
-from tempest.lib.common import rest_client
-from tempest.lib import exceptions as lib_exc
+from tempest.lib.services.volume.v3 import qos_client
 
 
-class QosSpecsClient(rest_client.RestClient):
-    """Volume V2 QoS client.
-
-       Client class to send CRUD QoS API requests
-    """
-
-    api_version = "v2"
-
-    def is_resource_deleted(self, qos_id):
-        try:
-            self.show_qos(qos_id)
-        except lib_exc.NotFound:
-            return True
-        return False
-
-    @property
-    def resource_type(self):
-        """Returns the primary type of resource this client works with."""
-        return 'qos'
-
-    def create_qos(self, **kwargs):
-        """Create a QoS Specification.
-
-        For a full list of available parameters, please refer to the official
-        API reference:
-        http://developer.openstack.org/api-ref/block-storage/v2/#create-qos-specification
-        """
-        post_body = json.dumps({'qos_specs': kwargs})
-        resp, body = self.post('qos-specs', post_body)
-        self.expected_success(200, resp.status)
-        body = json.loads(body)
-        return rest_client.ResponseBody(resp, body)
-
-    def delete_qos(self, qos_id, force=False):
-        """Delete the specified QoS specification."""
-        resp, body = self.delete(
-            "qos-specs/%s?force=%s" % (qos_id, force))
-        self.expected_success(202, resp.status)
-        return rest_client.ResponseBody(resp, body)
-
-    def list_qos(self):
-        """List all the QoS specifications created."""
-        url = 'qos-specs'
-        resp, body = self.get(url)
-        body = json.loads(body)
-        self.expected_success(200, resp.status)
-        return rest_client.ResponseBody(resp, body)
-
-    def show_qos(self, qos_id):
-        """Get the specified QoS specification."""
-        url = "qos-specs/%s" % qos_id
-        resp, body = self.get(url)
-        body = json.loads(body)
-        self.expected_success(200, resp.status)
-        return rest_client.ResponseBody(resp, body)
-
-    def set_qos_key(self, qos_id, **kwargs):
-        """Set the specified keys/values of QoS specification.
-
-        For a full list of available parameters, please refer to the official
-        API reference:
-        http://developer.openstack.org/api-ref/block-storage/v2/#set-keys-in-qos-specification
-        """
-        put_body = json.dumps({"qos_specs": kwargs})
-        resp, body = self.put('qos-specs/%s' % qos_id, put_body)
-        body = json.loads(body)
-        self.expected_success(200, resp.status)
-        return rest_client.ResponseBody(resp, body)
-
-    def unset_qos_key(self, qos_id, keys):
-        """Unset the specified keys of QoS specification.
-
-        :param keys: keys to delete from the QoS specification.
-
-        For a full list of available parameters, please refer to the official
-        API reference:
-        http://developer.openstack.org/api-ref/block-storage/v2/#unset-keys-in-qos-specification
-        """
-        put_body = json.dumps({'keys': keys})
-        resp, body = self.put('qos-specs/%s/delete_keys' % qos_id, put_body)
-        self.expected_success(202, resp.status)
-        return rest_client.ResponseBody(resp, body)
-
-    def associate_qos(self, qos_id, vol_type_id):
-        """Associate the specified QoS with specified volume-type."""
-        url = "qos-specs/%s/associate" % qos_id
-        url += "?vol_type_id=%s" % vol_type_id
-        resp, body = self.get(url)
-        self.expected_success(202, resp.status)
-        return rest_client.ResponseBody(resp, body)
-
-    def show_association_qos(self, qos_id):
-        """Get the association of the specified QoS specification."""
-        url = "qos-specs/%s/associations" % qos_id
-        resp, body = self.get(url)
-        body = json.loads(body)
-        self.expected_success(200, resp.status)
-        return rest_client.ResponseBody(resp, body)
-
-    def disassociate_qos(self, qos_id, vol_type_id):
-        """Disassociate the specified QoS with specified volume-type."""
-        url = "qos-specs/%s/disassociate" % qos_id
-        url += "?vol_type_id=%s" % vol_type_id
-        resp, body = self.get(url)
-        self.expected_success(202, resp.status)
-        return rest_client.ResponseBody(resp, body)
-
-    def disassociate_all_qos(self, qos_id):
-        """Disassociate the specified QoS with all associations."""
-        url = "qos-specs/%s/disassociate_all" % qos_id
-        resp, body = self.get(url)
-        self.expected_success(202, resp.status)
-        return rest_client.ResponseBody(resp, body)
+QosSpecsClient = moves.moved_class(
+    qos_client.QosSpecsClient, 'QosSpecsClient',
+    __name__, version="Rocky", removal_version='?')
diff --git a/tempest/lib/services/volume/v2/quota_classes_client.py b/tempest/lib/services/volume/v2/quota_classes_client.py
index 733b1ac..24aab89 100644
--- a/tempest/lib/services/volume/v2/quota_classes_client.py
+++ b/tempest/lib/services/volume/v2/quota_classes_client.py
@@ -12,40 +12,11 @@
 #    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
 #    License for the specific language governing permissions and limitations
 #    under the License.
+from debtcollector import moves
 
-from oslo_serialization import jsonutils as json
-
-from tempest.lib.common import rest_client
+from tempest.lib.services.volume.v3 import quota_classes_client
 
 
-class QuotaClassesClient(rest_client.RestClient):
-    """Volume quota class V2 client."""
-
-    api_version = "v2"
-
-    def show_quota_class_set(self, quota_class_id):
-        """List quotas for a quota class.
-
-        For a full list of available parameters, please refer to the official
-        API reference:
-        https://developer.openstack.org/api-ref/block-storage/v2/index.html#show-quota-classes
-        """
-        url = 'os-quota-class-sets/%s' % quota_class_id
-        resp, body = self.get(url)
-        self.expected_success(200, resp.status)
-        body = json.loads(body)
-        return rest_client.ResponseBody(resp, body)
-
-    def update_quota_class_set(self, quota_class_id, **kwargs):
-        """Update quotas for a quota class.
-
-        For a full list of available parameters, please refer to the official
-        API reference:
-        https://developer.openstack.org/api-ref/block-storage/v2/index.html#update-quota-classes
-        """
-        url = 'os-quota-class-sets/%s' % quota_class_id
-        put_body = json.dumps({'quota_class_set': kwargs})
-        resp, body = self.put(url, put_body)
-        self.expected_success(200, resp.status)
-        body = json.loads(body)
-        return rest_client.ResponseBody(resp, body)
+QuotaClassesClient = moves.moved_class(
+    quota_classes_client.QuotaClassesClient, 'QuotaClassesClient',
+    __name__, version="Rocky", removal_version='?')
diff --git a/tempest/lib/services/volume/v2/quotas_client.py b/tempest/lib/services/volume/v2/quotas_client.py
index e4b2895..6f9f61c 100644
--- a/tempest/lib/services/volume/v2/quotas_client.py
+++ b/tempest/lib/services/volume/v2/quotas_client.py
@@ -12,53 +12,11 @@
 #    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
 #    License for the specific language governing permissions and limitations
 #    under the License.
+from debtcollector import moves
 
-from oslo_serialization import jsonutils
-from six.moves.urllib import parse as urllib
-
-from tempest.lib.common import rest_client
+from tempest.lib.services.volume.v3 import quotas_client
 
 
-class QuotasClient(rest_client.RestClient):
-    """Client class to send CRUD Volume Quotas API V2 requests"""
-    api_version = "v2"
-
-    def show_default_quota_set(self, tenant_id):
-        """List the default volume quota set for a tenant."""
-
-        url = 'os-quota-sets/%s/defaults' % tenant_id
-        resp, body = self.get(url)
-        self.expected_success(200, resp.status)
-        body = jsonutils.loads(body)
-        return rest_client.ResponseBody(resp, body)
-
-    def show_quota_set(self, tenant_id, params=None):
-        """List the quota set for a tenant."""
-
-        url = 'os-quota-sets/%s' % tenant_id
-        if params:
-            url += '?%s' % urllib.urlencode(params)
-
-        resp, body = self.get(url)
-        self.expected_success(200, resp.status)
-        body = jsonutils.loads(body)
-        return rest_client.ResponseBody(resp, body)
-
-    def update_quota_set(self, tenant_id, **kwargs):
-        """Updates quota set
-
-        For a full list of available parameters, please refer to the official
-        API reference:
-        https://developer.openstack.org/api-ref/block-storage/v2/index.html#update-quotas
-        """
-        put_body = jsonutils.dumps({'quota_set': kwargs})
-        resp, body = self.put('os-quota-sets/%s' % tenant_id, put_body)
-        self.expected_success(200, resp.status)
-        body = jsonutils.loads(body)
-        return rest_client.ResponseBody(resp, body)
-
-    def delete_quota_set(self, tenant_id):
-        """Delete the tenant's quota set."""
-        resp, body = self.delete('os-quota-sets/%s' % tenant_id)
-        self.expected_success(200, resp.status)
-        return rest_client.ResponseBody(resp, body)
+QuotasClient = moves.moved_class(
+    quotas_client.QuotasClient, 'QuotasClient',
+    __name__, version="Rocky", removal_version='?')
diff --git a/tempest/lib/services/volume/v2/scheduler_stats_client.py b/tempest/lib/services/volume/v2/scheduler_stats_client.py
index 0d04f85..a5adb34 100644
--- a/tempest/lib/services/volume/v2/scheduler_stats_client.py
+++ b/tempest/lib/services/volume/v2/scheduler_stats_client.py
@@ -12,26 +12,11 @@
 #    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
 #    License for the specific language governing permissions and limitations
 #    under the License.
+from debtcollector import moves
 
-from oslo_serialization import jsonutils as json
-
-from tempest.lib.common import rest_client
+from tempest.lib.services.volume.v3 import scheduler_stats_client
 
 
-class SchedulerStatsClient(rest_client.RestClient):
-    api_version = "v2"
-
-    def list_pools(self, detail=False):
-        """List all the volumes pools (hosts).
-
-        For a full list of available parameters, please refer to the official
-        API reference:
-        https://developer.openstack.org/api-ref/block-storage/v2/index.html#list-back-end-storage-pools
-        """
-        url = 'scheduler-stats/get_pools'
-        if detail:
-            url += '?detail=True'
-        resp, body = self.get(url)
-        body = json.loads(body)
-        self.expected_success(200, resp.status)
-        return rest_client.ResponseBody(resp, body)
+SchedulerStatsClient = moves.moved_class(
+    scheduler_stats_client.SchedulerStatsClient, 'SchedulerStatsClient',
+    __name__, version="Rocky", removal_version='?')
diff --git a/tempest/lib/services/volume/v2/services_client.py b/tempest/lib/services/volume/v2/services_client.py
index bc55469..a4491d3 100644
--- a/tempest/lib/services/volume/v2/services_client.py
+++ b/tempest/lib/services/volume/v2/services_client.py
@@ -12,23 +12,11 @@
 #    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
 #    License for the specific language governing permissions and limitations
 #    under the License.
+from debtcollector import moves
 
-from oslo_serialization import jsonutils as json
-from six.moves.urllib import parse as urllib
-
-from tempest.lib.common import rest_client
+from tempest.lib.services.volume.v3 import services_client
 
 
-class ServicesClient(rest_client.RestClient):
-    """Client class to send CRUD Volume V2 API requests"""
-    api_version = "v2"
-
-    def list_services(self, **params):
-        url = 'os-services'
-        if params:
-            url += '?%s' % urllib.urlencode(params)
-
-        resp, body = self.get(url)
-        body = json.loads(body)
-        self.expected_success(200, resp.status)
-        return rest_client.ResponseBody(resp, body)
+ServicesClient = moves.moved_class(
+    services_client.ServicesClient, 'ServicesClient',
+    __name__, version="Rocky", removal_version='?')
diff --git a/tempest/lib/services/volume/v2/snapshot_manage_client.py b/tempest/lib/services/volume/v2/snapshot_manage_client.py
index aecd30b..132209f 100644
--- a/tempest/lib/services/volume/v2/snapshot_manage_client.py
+++ b/tempest/lib/services/volume/v2/snapshot_manage_client.py
@@ -12,22 +12,11 @@
 #    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
 #    License for the specific language governing permissions and limitations
 #    under the License.
+from debtcollector import moves
 
-from oslo_serialization import jsonutils as json
-
-from tempest.lib.common import rest_client
+from tempest.lib.services.volume.v3 import snapshot_manage_client
 
 
-class SnapshotManageClient(rest_client.RestClient):
-    """Snapshot manage V2 client."""
-
-    api_version = "v2"
-
-    def manage_snapshot(self, **kwargs):
-        """Manage a snapshot."""
-        post_body = json.dumps({'snapshot': kwargs})
-        url = 'os-snapshot-manage'
-        resp, body = self.post(url, post_body)
-        self.expected_success(202, resp.status)
-        body = json.loads(body)
-        return rest_client.ResponseBody(resp, body)
+SnapshotManageClient = moves.moved_class(
+    snapshot_manage_client.SnapshotManageClient, 'SnapshotManageClient',
+    __name__, version="Rocky", removal_version='?')
diff --git a/tempest/lib/services/volume/v2/snapshots_client.py b/tempest/lib/services/volume/v2/snapshots_client.py
index 4bc2842..3a72cc1 100644
--- a/tempest/lib/services/volume/v2/snapshots_client.py
+++ b/tempest/lib/services/volume/v2/snapshots_client.py
@@ -9,200 +9,11 @@
 #    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
 #    License for the specific language governing permissions and limitations
 #    under the License.
+from debtcollector import moves
 
-from oslo_serialization import jsonutils as json
-from six.moves.urllib import parse as urllib
-
-from tempest.lib.common import rest_client
-from tempest.lib import exceptions as lib_exc
+from tempest.lib.services.volume.v3 import snapshots_client
 
 
-class SnapshotsClient(rest_client.RestClient):
-    """Client class to send CRUD Volume V2 API requests."""
-    api_version = "v2"
-    create_resp = 202
-
-    def list_snapshots(self, detail=False, **params):
-        """List all the snapshot.
-
-        For a full list of available parameters, please refer to the official
-        API reference:
-        http://developer.openstack.org/api-ref/block-storage/v2/#list-snapshots-with-details
-        http://developer.openstack.org/api-ref/block-storage/v2/#list-snapshots
-        """
-        url = 'snapshots'
-        if detail:
-            url += '/detail'
-        if params:
-            url += '?%s' % urllib.urlencode(params)
-
-        resp, body = self.get(url)
-        body = json.loads(body)
-        self.expected_success(200, resp.status)
-        return rest_client.ResponseBody(resp, body)
-
-    def show_snapshot(self, snapshot_id):
-        """Returns the details of a single snapshot.
-
-        For a full list of available parameters, please refer to the official
-        API reference:
-        http://developer.openstack.org/api-ref/block-storage/v2/#show-snapshot-details
-        """
-        url = "snapshots/%s" % snapshot_id
-        resp, body = self.get(url)
-        body = json.loads(body)
-        self.expected_success(200, resp.status)
-        return rest_client.ResponseBody(resp, body)
-
-    def create_snapshot(self, **kwargs):
-        """Creates a new snapshot.
-
-        For a full list of available parameters, please refer to the official
-        API reference:
-        http://developer.openstack.org/api-ref/block-storage/v2/#create-snapshot
-        """
-        post_body = json.dumps({'snapshot': kwargs})
-        resp, body = self.post('snapshots', post_body)
-        body = json.loads(body)
-        self.expected_success(self.create_resp, resp.status)
-        return rest_client.ResponseBody(resp, body)
-
-    def update_snapshot(self, snapshot_id, **kwargs):
-        """Updates a snapshot.
-
-        For a full list of available parameters, please refer to the official
-        API reference:
-        http://developer.openstack.org/api-ref/block-storage/v2/#update-snapshot
-        """
-        put_body = json.dumps({'snapshot': kwargs})
-        resp, body = self.put('snapshots/%s' % snapshot_id, put_body)
-        body = json.loads(body)
-        self.expected_success(200, resp.status)
-        return rest_client.ResponseBody(resp, body)
-
-    def delete_snapshot(self, snapshot_id):
-        """Delete Snapshot.
-
-        For a full list of available parameters, please refer to the official
-        API reference:
-        http://developer.openstack.org/api-ref/block-storage/v2/#delete-snapshot
-        """
-        resp, body = self.delete("snapshots/%s" % snapshot_id)
-        self.expected_success(202, resp.status)
-        return rest_client.ResponseBody(resp, body)
-
-    def is_resource_deleted(self, id):
-        try:
-            self.show_snapshot(id)
-        except lib_exc.NotFound:
-            return True
-        return False
-
-    @property
-    def resource_type(self):
-        """Returns the primary type of resource this client works with."""
-        return 'volume-snapshot'
-
-    def reset_snapshot_status(self, snapshot_id, status):
-        """Reset the specified snapshot's status."""
-        post_body = json.dumps({'os-reset_status': {"status": status}})
-        resp, body = self.post('snapshots/%s/action' % snapshot_id, post_body)
-        self.expected_success(202, resp.status)
-        return rest_client.ResponseBody(resp, body)
-
-    def update_snapshot_status(self, snapshot_id, **kwargs):
-        """Update the specified snapshot's status."""
-        # TODO(gmann): api-site doesn't contain doc ref
-        # for this API. After fixing the api-site, we need to
-        # add the link here.
-        # Bug https://bugs.launchpad.net/openstack-api-site/+bug/1532645
-
-        post_body = json.dumps({'os-update_snapshot_status': kwargs})
-        url = 'snapshots/%s/action' % snapshot_id
-        resp, body = self.post(url, post_body)
-        self.expected_success(202, resp.status)
-        return rest_client.ResponseBody(resp, body)
-
-    def create_snapshot_metadata(self, snapshot_id, metadata):
-        """Create metadata for the snapshot.
-
-        For a full list of available parameters, please refer to the official
-        API reference:
-        http://developer.openstack.org/api-ref/block-storage/v2/#create-snapshot-metadata
-        """
-        put_body = json.dumps({'metadata': metadata})
-        url = "snapshots/%s/metadata" % snapshot_id
-        resp, body = self.post(url, put_body)
-        body = json.loads(body)
-        self.expected_success(200, resp.status)
-        return rest_client.ResponseBody(resp, body)
-
-    def show_snapshot_metadata(self, snapshot_id):
-        """Get metadata of the snapshot.
-
-        For a full list of available parameters, please refer to the official
-        API reference:
-        http://developer.openstack.org/api-ref/block-storage/v2/#show-snapshot-metadata
-        """
-        url = "snapshots/%s/metadata" % snapshot_id
-        resp, body = self.get(url)
-        body = json.loads(body)
-        self.expected_success(200, resp.status)
-        return rest_client.ResponseBody(resp, body)
-
-    def update_snapshot_metadata(self, snapshot_id, **kwargs):
-        """Update metadata for the snapshot.
-
-        For a full list of available parameters, please refer to the official
-        API reference:
-        http://developer.openstack.org/api-ref/block-storage/v2/#update-snapshot-metadata
-        """
-        put_body = json.dumps(kwargs)
-        url = "snapshots/%s/metadata" % snapshot_id
-        resp, body = self.put(url, put_body)
-        body = json.loads(body)
-        self.expected_success(200, resp.status)
-        return rest_client.ResponseBody(resp, body)
-
-    def show_snapshot_metadata_item(self, snapshot_id, id):
-        """Show metadata item for the snapshot."""
-        url = "snapshots/%s/metadata/%s" % (snapshot_id, id)
-        resp, body = self.get(url)
-        body = json.loads(body)
-        self.expected_success(200, resp.status)
-        return rest_client.ResponseBody(resp, body)
-
-    def update_snapshot_metadata_item(self, snapshot_id, id, **kwargs):
-        """Update metadata item for the snapshot."""
-        # TODO(piyush): Current api-site doesn't contain this API description.
-        # After fixing the api-site, we need to fix here also for putting the
-        # link to api-site.
-        # LP: https://bugs.launchpad.net/openstack-api-site/+bug/1529064
-        put_body = json.dumps(kwargs)
-        url = "snapshots/%s/metadata/%s" % (snapshot_id, id)
-        resp, body = self.put(url, put_body)
-        body = json.loads(body)
-        self.expected_success(200, resp.status)
-        return rest_client.ResponseBody(resp, body)
-
-    def delete_snapshot_metadata_item(self, snapshot_id, id):
-        """Delete metadata item for the snapshot."""
-        url = "snapshots/%s/metadata/%s" % (snapshot_id, id)
-        resp, body = self.delete(url)
-        self.expected_success(200, resp.status)
-        return rest_client.ResponseBody(resp, body)
-
-    def force_delete_snapshot(self, snapshot_id):
-        """Force Delete Snapshot."""
-        post_body = json.dumps({'os-force_delete': {}})
-        resp, body = self.post('snapshots/%s/action' % snapshot_id, post_body)
-        self.expected_success(202, resp.status)
-        return rest_client.ResponseBody(resp, body)
-
-    def unmanage_snapshot(self, snapshot_id):
-        """Unmanage a snapshot."""
-        post_body = json.dumps({'os-unmanage': {}})
-        url = 'snapshots/%s/action' % (snapshot_id)
-        resp, body = self.post(url, post_body)
-        self.expected_success(202, resp.status)
-        return rest_client.ResponseBody(resp, body)
+SnapshotsClient = moves.moved_class(
+    snapshots_client.SnapshotsClient, 'SnapshotsClient',
+    __name__, version="Rocky", removal_version='?')
diff --git a/tempest/lib/services/volume/v2/transfers_client.py b/tempest/lib/services/volume/v2/transfers_client.py
index 2dfbe7b..701d0ae 100644
--- a/tempest/lib/services/volume/v2/transfers_client.py
+++ b/tempest/lib/services/volume/v2/transfers_client.py
@@ -12,72 +12,11 @@
 #    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
 #    License for the specific language governing permissions and limitations
 #    under the License.
+from debtcollector import moves
 
-from oslo_serialization import jsonutils as json
-from six.moves.urllib import parse as urllib
-
-from tempest.lib.common import rest_client
+from tempest.lib.services.volume.v3 import transfers_client
 
 
-class TransfersClient(rest_client.RestClient):
-    """Client class to send CRUD Volume Transfer V2 API requests"""
-    api_version = "v2"
-
-    def create_volume_transfer(self, **kwargs):
-        """Create a volume transfer.
-
-        For a full list of available parameters, please refer to the official
-        API reference:
-        https://developer.openstack.org/api-ref/block-storage/v2/#create-volume-transfer
-        """
-        post_body = json.dumps({'transfer': kwargs})
-        resp, body = self.post('os-volume-transfer', post_body)
-        body = json.loads(body)
-        self.expected_success(202, resp.status)
-        return rest_client.ResponseBody(resp, body)
-
-    def show_volume_transfer(self, transfer_id):
-        """Returns the details of a volume transfer."""
-        url = "os-volume-transfer/%s" % transfer_id
-        resp, body = self.get(url)
-        body = json.loads(body)
-        self.expected_success(200, resp.status)
-        return rest_client.ResponseBody(resp, body)
-
-    def list_volume_transfers(self, detail=False, **params):
-        """List all the volume transfers created.
-
-        For a full list of available parameters, please refer to the official
-        API reference:
-        https://developer.openstack.org/api-ref/block-storage/v2/#list-volume-transfers
-        https://developer.openstack.org/api-ref/block-storage/v2/#list-volume-transfers-with-details
-        """
-        url = 'os-volume-transfer'
-        if detail:
-            url += '/detail'
-        if params:
-            url += '?%s' % urllib.urlencode(params)
-        resp, body = self.get(url)
-        body = json.loads(body)
-        self.expected_success(200, resp.status)
-        return rest_client.ResponseBody(resp, body)
-
-    def delete_volume_transfer(self, transfer_id):
-        """Delete a volume transfer."""
-        resp, body = self.delete("os-volume-transfer/%s" % transfer_id)
-        self.expected_success(202, resp.status)
-        return rest_client.ResponseBody(resp, body)
-
-    def accept_volume_transfer(self, transfer_id, **kwargs):
-        """Accept a volume transfer.
-
-        For a full list of available parameters, please refer to the official
-        API reference:
-        https://developer.openstack.org/api-ref/block-storage/v2/#accept-volume-transfer
-        """
-        url = 'os-volume-transfer/%s/accept' % transfer_id
-        post_body = json.dumps({'accept': kwargs})
-        resp, body = self.post(url, post_body)
-        body = json.loads(body)
-        self.expected_success(202, resp.status)
-        return rest_client.ResponseBody(resp, body)
+TransfersClient = moves.moved_class(
+    transfers_client.TransfersClient, 'TransfersClient',
+    __name__, version="Rocky", removal_version='?')
diff --git a/tempest/lib/services/volume/v2/types_client.py b/tempest/lib/services/volume/v2/types_client.py
index af4fd8c..8457f91 100644
--- a/tempest/lib/services/volume/v2/types_client.py
+++ b/tempest/lib/services/volume/v2/types_client.py
@@ -12,194 +12,11 @@
 #    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
 #    License for the specific language governing permissions and limitations
 #    under the License.
+from debtcollector import moves
 
-from oslo_serialization import jsonutils as json
-from six.moves.urllib import parse as urllib
-
-from tempest.lib.common import rest_client
-from tempest.lib import exceptions as lib_exc
+from tempest.lib.services.volume.v3 import types_client
 
 
-class TypesClient(rest_client.RestClient):
-    """Client class to send CRUD Volume V2 API requests"""
-    api_version = "v2"
-
-    def is_resource_deleted(self, id):
-        try:
-            self.show_volume_type(id)
-        except lib_exc.NotFound:
-            return True
-        return False
-
-    @property
-    def resource_type(self):
-        """Returns the primary type of resource this client works with."""
-        return 'volume-type'
-
-    def list_volume_types(self, **params):
-        """List all the volume_types created.
-
-        For a full list of available parameters, please refer to the official
-        API reference:
-        https://developer.openstack.org/api-ref/block-storage/v2/#list-all-volume-types-for-v2
-        """
-        url = 'types'
-        if params:
-            url += '?%s' % urllib.urlencode(params)
-
-        resp, body = self.get(url)
-        body = json.loads(body)
-        self.expected_success(200, resp.status)
-        return rest_client.ResponseBody(resp, body)
-
-    def show_volume_type(self, volume_type_id):
-        """Returns the details of a single volume_type.
-
-        For a full list of available parameters, please refer to the official
-        API reference:
-        https://developer.openstack.org/api-ref/block-storage/v2/#show-volume-type-details-for-v2
-        """
-        url = "types/%s" % volume_type_id
-        resp, body = self.get(url)
-        body = json.loads(body)
-        self.expected_success(200, resp.status)
-        return rest_client.ResponseBody(resp, body)
-
-    def create_volume_type(self, **kwargs):
-        """Create volume type.
-
-        For a full list of available parameters, please refer to the official
-        API reference:
-        https://developer.openstack.org/api-ref/block-storage/v2/#create-volume-type-for-v2
-        """
-        post_body = json.dumps({'volume_type': kwargs})
-        resp, body = self.post('types', post_body)
-        body = json.loads(body)
-        self.expected_success(200, resp.status)
-        return rest_client.ResponseBody(resp, body)
-
-    def delete_volume_type(self, volume_type_id):
-        """Deletes the Specified Volume_type.
-
-        For a full list of available parameters, please refer to the official
-        API reference:
-        http://developer.openstack.org/api-ref/block-storage/v2/#delete-volume-type
-        """
-        resp, body = self.delete("types/%s" % volume_type_id)
-        self.expected_success(202, resp.status)
-        return rest_client.ResponseBody(resp, body)
-
-    def list_volume_types_extra_specs(self, volume_type_id, **params):
-        """List all the volume_types extra specs created.
-
-        TODO: Current api-site doesn't contain this API description.
-        After fixing the api-site, we need to fix here also for putting
-        the link to api-site.
-        """
-        url = 'types/%s/extra_specs' % volume_type_id
-        if params:
-            url += '?%s' % urllib.urlencode(params)
-
-        resp, body = self.get(url)
-        body = json.loads(body)
-        self.expected_success(200, resp.status)
-        return rest_client.ResponseBody(resp, body)
-
-    def show_volume_type_extra_specs(self, volume_type_id, extra_specs_name):
-        """Returns the details of a single volume_type extra spec."""
-        url = "types/%s/extra_specs/%s" % (volume_type_id, extra_specs_name)
-        resp, body = self.get(url)
-        body = json.loads(body)
-        self.expected_success(200, resp.status)
-        return rest_client.ResponseBody(resp, body)
-
-    def create_volume_type_extra_specs(self, volume_type_id, extra_specs):
-        """Creates a new Volume_type extra spec.
-
-        volume_type_id: Id of volume_type.
-        extra_specs: A dictionary of values to be used as extra_specs.
-        """
-        url = "types/%s/extra_specs" % volume_type_id
-        post_body = json.dumps({'extra_specs': extra_specs})
-        resp, body = self.post(url, post_body)
-        body = json.loads(body)
-        self.expected_success(200, resp.status)
-        return rest_client.ResponseBody(resp, body)
-
-    def delete_volume_type_extra_specs(self, volume_type_id, extra_spec_name):
-        """Deletes the Specified Volume_type extra spec."""
-        resp, body = self.delete("types/%s/extra_specs/%s" % (
-            volume_type_id, extra_spec_name))
-        self.expected_success(202, resp.status)
-        return rest_client.ResponseBody(resp, body)
-
-    def update_volume_type(self, volume_type_id, **kwargs):
-        """Updates volume type name, description, and/or is_public.
-
-        For a full list of available parameters, please refer to the official
-        API reference:
-        http://developer.openstack.org/api-ref/block-storage/v2/#update-volume-type
-        """
-        put_body = json.dumps({'volume_type': kwargs})
-        resp, body = self.put('types/%s' % volume_type_id, put_body)
-        body = json.loads(body)
-        self.expected_success(200, resp.status)
-        return rest_client.ResponseBody(resp, body)
-
-    def update_volume_type_extra_specs(self, volume_type_id, extra_spec_name,
-                                       extra_specs):
-        """Update a volume_type extra spec.
-
-        volume_type_id: Id of volume_type.
-        extra_spec_name: Name of the extra spec to be updated.
-        extra_spec: A dictionary of with key as extra_spec_name and the
-                     updated value.
-        For a full list of available parameters, please refer to the official
-        API reference:
-        http://developer.openstack.org/api-ref/block-storage/v2/#update-extra-specs-for-a-volume-type
-        """
-        url = "types/%s/extra_specs/%s" % (volume_type_id, extra_spec_name)
-        put_body = json.dumps(extra_specs)
-        resp, body = self.put(url, put_body)
-        body = json.loads(body)
-        self.expected_success(200, resp.status)
-        return rest_client.ResponseBody(resp, body)
-
-    def add_type_access(self, volume_type_id, **kwargs):
-        """Adds volume type access for the given project.
-
-        For a full list of available parameters, please refer to the official
-        API reference:
-        http://developer.openstack.org/api-ref/block-storage/v2/#add-private-volume-type-access
-        """
-        post_body = json.dumps({'addProjectAccess': kwargs})
-        url = 'types/%s/action' % volume_type_id
-        resp, body = self.post(url, post_body)
-        self.expected_success(202, resp.status)
-        return rest_client.ResponseBody(resp, body)
-
-    def remove_type_access(self, volume_type_id, **kwargs):
-        """Removes volume type access for the given project.
-
-        For a full list of available parameters, please refer to the official
-        API reference:
-        http://developer.openstack.org/api-ref/block-storage/v2/#remove-private-volume-type-access
-        """
-        post_body = json.dumps({'removeProjectAccess': kwargs})
-        url = 'types/%s/action' % volume_type_id
-        resp, body = self.post(url, post_body)
-        self.expected_success(202, resp.status)
-        return rest_client.ResponseBody(resp, body)
-
-    def list_type_access(self, volume_type_id):
-        """Print access information about the given volume type.
-
-        For a full list of available parameters, please refer to the official
-        API reference:
-        http://developer.openstack.org/api-ref/block-storage/v2/#list-private-volume-type-access-details
-        """
-        url = 'types/%s/os-volume-type-access' % volume_type_id
-        resp, body = self.get(url)
-        body = json.loads(body)
-        self.expected_success(200, resp.status)
-        return rest_client.ResponseBody(resp, body)
+TypesClient = moves.moved_class(
+    types_client.TypesClient, 'TypesClient',
+    __name__, version="Rocky", removal_version='?')
diff --git a/tempest/lib/services/volume/v2/volume_manage_client.py b/tempest/lib/services/volume/v2/volume_manage_client.py
index 12f4240..0669326 100644
--- a/tempest/lib/services/volume/v2/volume_manage_client.py
+++ b/tempest/lib/services/volume/v2/volume_manage_client.py
@@ -12,26 +12,11 @@
 #    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
 #    License for the specific language governing permissions and limitations
 #    under the License.
+from debtcollector import moves
 
-from oslo_serialization import jsonutils as json
-
-from tempest.lib.common import rest_client
+from tempest.lib.services.volume.v3 import volume_manage_client
 
 
-class VolumeManageClient(rest_client.RestClient):
-    """Volume manage V2 client."""
-
-    api_version = "v2"
-
-    def manage_volume(self, **kwargs):
-        """Manage existing volume.
-
-        For a full list of available parameters, please refer to the official
-        API reference:
-        https://developer.openstack.org/api-ref/block-storage/v2/#manage-existing-volume
-        """
-        post_body = json.dumps({'volume': kwargs})
-        resp, body = self.post('os-volume-manage', post_body)
-        self.expected_success(202, resp.status)
-        body = json.loads(body)
-        return rest_client.ResponseBody(resp, body)
+VolumeManageClient = moves.moved_class(
+    volume_manage_client.VolumeManageClient, 'VolumeManageClient',
+    __name__, version="Rocky", removal_version='?')
diff --git a/tempest/lib/services/volume/v2/volumes_client.py b/tempest/lib/services/volume/v2/volumes_client.py
index da3f2b5..f5f9e6e 100644
--- a/tempest/lib/services/volume/v2/volumes_client.py
+++ b/tempest/lib/services/volume/v2/volumes_client.py
@@ -12,341 +12,11 @@
 #    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
 #    License for the specific language governing permissions and limitations
 #    under the License.
+from debtcollector import moves
 
-from oslo_serialization import jsonutils as json
-import six
-from six.moves.urllib import parse as urllib
-
-from tempest.lib.common import rest_client
-from tempest.lib import exceptions as lib_exc
-from tempest.lib.services.volume import base_client
+from tempest.lib.services.volume.v3 import volumes_client
 
 
-class VolumesClient(base_client.BaseClient):
-    """Client class to send CRUD Volume V2 API requests"""
-    api_version = "v2"
-
-    def _prepare_params(self, params):
-        """Prepares params for use in get or _ext_get methods.
-
-        If params is a string it will be left as it is, but if it's not it will
-        be urlencoded.
-        """
-        if isinstance(params, six.string_types):
-            return params
-        return urllib.urlencode(params)
-
-    def list_volumes(self, detail=False, params=None):
-        """List all the volumes created.
-
-        Params can be a string (must be urlencoded) or a dictionary.
-        For a full list of available parameters, please refer to the official
-        API reference:
-        http://developer.openstack.org/api-ref/block-storage/v2/#list-volumes-with-details
-        http://developer.openstack.org/api-ref/block-storage/v2/#list-volumes
-        """
-        url = 'volumes'
-        if detail:
-            url += '/detail'
-        if params:
-            url += '?%s' % self._prepare_params(params)
-
-        resp, body = self.get(url)
-        body = json.loads(body)
-        self.expected_success(200, resp.status)
-        return rest_client.ResponseBody(resp, body)
-
-    def show_volume(self, volume_id):
-        """Returns the details of a single volume."""
-        url = "volumes/%s" % volume_id
-        resp, body = self.get(url)
-        body = json.loads(body)
-        self.expected_success(200, resp.status)
-        return rest_client.ResponseBody(resp, body)
-
-    def create_volume(self, **kwargs):
-        """Creates a new Volume.
-
-        For a full list of available parameters, please refer to the official
-        API reference:
-        http://developer.openstack.org/api-ref/block-storage/v2/#create-volume
-        """
-        post_body = json.dumps({'volume': kwargs})
-        resp, body = self.post('volumes', post_body)
-        body = json.loads(body)
-        self.expected_success(202, resp.status)
-        return rest_client.ResponseBody(resp, body)
-
-    def update_volume(self, volume_id, **kwargs):
-        """Updates the Specified Volume.
-
-        For a full list of available parameters, please refer to the official
-        API reference:
-        http://developer.openstack.org/api-ref/block-storage/v2/#update-volume
-        """
-        put_body = json.dumps({'volume': kwargs})
-        resp, body = self.put('volumes/%s' % volume_id, put_body)
-        body = json.loads(body)
-        self.expected_success(200, resp.status)
-        return rest_client.ResponseBody(resp, body)
-
-    def delete_volume(self, volume_id, **params):
-        """Deletes the Specified Volume.
-
-        For a full list of available parameters, please refer to the official
-        API reference:
-        https://developer.openstack.org/api-ref/block-storage/v2/#delete-volume
-        """
-        url = 'volumes/%s' % volume_id
-        if params:
-            url += '?%s' % urllib.urlencode(params)
-        resp, body = self.delete(url)
-        self.expected_success(202, resp.status)
-        return rest_client.ResponseBody(resp, body)
-
-    def upload_volume(self, volume_id, **kwargs):
-        """Uploads a volume in Glance."""
-        post_body = json.dumps({'os-volume_upload_image': kwargs})
-        url = 'volumes/%s/action' % (volume_id)
-        resp, body = self.post(url, post_body)
-        body = json.loads(body)
-        self.expected_success(202, resp.status)
-        return rest_client.ResponseBody(resp, body)
-
-    def attach_volume(self, volume_id, **kwargs):
-        """Attaches a volume to a given instance on a given mountpoint.
-
-        For a full list of available parameters, please refer to the official
-        API reference:
-        http://developer.openstack.org/api-ref/block-storage/v2/#attach-volume-to-server
-        """
-        post_body = json.dumps({'os-attach': kwargs})
-        url = 'volumes/%s/action' % (volume_id)
-        resp, body = self.post(url, post_body)
-        self.expected_success(202, resp.status)
-        return rest_client.ResponseBody(resp, body)
-
-    def set_bootable_volume(self, volume_id, **kwargs):
-        """Set a bootable flag for a volume - true or false.
-
-        For a full list of available parameters, please refer to the official
-        API reference:
-        http://developer.openstack.org/api-ref/block-storage/v2/#update-volume-bootable-status
-        """
-        post_body = json.dumps({'os-set_bootable': kwargs})
-        url = 'volumes/%s/action' % (volume_id)
-        resp, body = self.post(url, post_body)
-        self.expected_success(200, resp.status)
-        return rest_client.ResponseBody(resp, body)
-
-    def detach_volume(self, volume_id):
-        """Detaches a volume from an instance."""
-        post_body = json.dumps({'os-detach': {}})
-        url = 'volumes/%s/action' % (volume_id)
-        resp, body = self.post(url, post_body)
-        self.expected_success(202, resp.status)
-        return rest_client.ResponseBody(resp, body)
-
-    def reserve_volume(self, volume_id):
-        """Reserves a volume."""
-        post_body = json.dumps({'os-reserve': {}})
-        url = 'volumes/%s/action' % (volume_id)
-        resp, body = self.post(url, post_body)
-        self.expected_success(202, resp.status)
-        return rest_client.ResponseBody(resp, body)
-
-    def unreserve_volume(self, volume_id):
-        """Restore a reserved volume ."""
-        post_body = json.dumps({'os-unreserve': {}})
-        url = 'volumes/%s/action' % (volume_id)
-        resp, body = self.post(url, post_body)
-        self.expected_success(202, resp.status)
-        return rest_client.ResponseBody(resp, body)
-
-    def is_resource_deleted(self, id):
-        """Check the specified resource is deleted or not.
-
-        :param id: A checked resource id
-        :raises lib_exc.DeleteErrorException: If the specified resource is on
-        the status the delete was failed.
-        """
-        try:
-            volume = self.show_volume(id)
-        except lib_exc.NotFound:
-            return True
-        if volume["volume"]["status"] == "error_deleting":
-            raise lib_exc.DeleteErrorException(resource_id=id)
-        return False
-
-    @property
-    def resource_type(self):
-        """Returns the primary type of resource this client works with."""
-        return 'volume'
-
-    def extend_volume(self, volume_id, **kwargs):
-        """Extend a volume.
-
-        For a full list of available parameters, please refer to the official
-        API reference:
-        http://developer.openstack.org/api-ref/block-storage/v2/#extend-volume-size
-        """
-        post_body = json.dumps({'os-extend': kwargs})
-        url = 'volumes/%s/action' % (volume_id)
-        resp, body = self.post(url, post_body)
-        self.expected_success(202, resp.status)
-        return rest_client.ResponseBody(resp, body)
-
-    def reset_volume_status(self, volume_id, **kwargs):
-        """Reset the Specified Volume's Status.
-
-        For a full list of available parameters, please refer to the official
-        API reference:
-        http://developer.openstack.org/api-ref/block-storage/v2/#reset-volume-statuses
-        """
-        post_body = json.dumps({'os-reset_status': kwargs})
-        resp, body = self.post('volumes/%s/action' % volume_id, post_body)
-        self.expected_success(202, resp.status)
-        return rest_client.ResponseBody(resp, body)
-
-    def update_volume_readonly(self, volume_id, **kwargs):
-        """Update the Specified Volume readonly."""
-        post_body = json.dumps({'os-update_readonly_flag': kwargs})
-        url = 'volumes/%s/action' % (volume_id)
-        resp, body = self.post(url, post_body)
-        self.expected_success(202, resp.status)
-        return rest_client.ResponseBody(resp, body)
-
-    def force_delete_volume(self, volume_id):
-        """Force Delete Volume."""
-        post_body = json.dumps({'os-force_delete': {}})
-        resp, body = self.post('volumes/%s/action' % volume_id, post_body)
-        self.expected_success(202, resp.status)
-        return rest_client.ResponseBody(resp, body)
-
-    def create_volume_metadata(self, volume_id, metadata):
-        """Create metadata for the volume.
-
-        For a full list of available parameters, please refer to the official
-        API reference:
-        http://developer.openstack.org/api-ref/block-storage/v2/#create-volume-metadata
-        """
-        put_body = json.dumps({'metadata': metadata})
-        url = "volumes/%s/metadata" % volume_id
-        resp, body = self.post(url, put_body)
-        body = json.loads(body)
-        self.expected_success(200, resp.status)
-        return rest_client.ResponseBody(resp, body)
-
-    def show_volume_metadata(self, volume_id):
-        """Get metadata of the volume."""
-        url = "volumes/%s/metadata" % volume_id
-        resp, body = self.get(url)
-        body = json.loads(body)
-        self.expected_success(200, resp.status)
-        return rest_client.ResponseBody(resp, body)
-
-    def update_volume_metadata(self, volume_id, metadata):
-        """Update metadata for the volume.
-
-        For a full list of available parameters, please refer to the official
-        API reference:
-        http://developer.openstack.org/api-ref/block-storage/v2/#update-volume-metadata
-        """
-        put_body = json.dumps({'metadata': metadata})
-        url = "volumes/%s/metadata" % volume_id
-        resp, body = self.put(url, put_body)
-        body = json.loads(body)
-        self.expected_success(200, resp.status)
-        return rest_client.ResponseBody(resp, body)
-
-    def show_volume_metadata_item(self, volume_id, id):
-        """Show metadata item for the volume."""
-        url = "volumes/%s/metadata/%s" % (volume_id, id)
-        resp, body = self.get(url)
-        body = json.loads(body)
-        self.expected_success(200, resp.status)
-        return rest_client.ResponseBody(resp, body)
-
-    def update_volume_metadata_item(self, volume_id, id, meta_item):
-        """Update metadata item for the volume."""
-        put_body = json.dumps({'meta': meta_item})
-        url = "volumes/%s/metadata/%s" % (volume_id, id)
-        resp, body = self.put(url, put_body)
-        body = json.loads(body)
-        self.expected_success(200, resp.status)
-        return rest_client.ResponseBody(resp, body)
-
-    def delete_volume_metadata_item(self, volume_id, id):
-        """Delete metadata item for the volume."""
-        url = "volumes/%s/metadata/%s" % (volume_id, id)
-        resp, body = self.delete(url)
-        self.expected_success(200, resp.status)
-        return rest_client.ResponseBody(resp, body)
-
-    def retype_volume(self, volume_id, **kwargs):
-        """Updates volume with new volume type.
-
-        For a full list of available parameters, please refer to the official
-        API reference:
-        https://developer.openstack.org/api-ref/block-storage/v2/#retype-volume
-        """
-        post_body = json.dumps({'os-retype': kwargs})
-        resp, body = self.post('volumes/%s/action' % volume_id, post_body)
-        self.expected_success(202, resp.status)
-        return rest_client.ResponseBody(resp, body)
-
-    def force_detach_volume(self, volume_id, **kwargs):
-        """Force detach a volume.
-
-        For a full list of available parameters, please refer to the official
-        API reference:
-        https://developer.openstack.org/api-ref/block-storage/v2/#force-detach-volume
-        """
-        post_body = json.dumps({'os-force_detach': kwargs})
-        url = 'volumes/%s/action' % volume_id
-        resp, body = self.post(url, post_body)
-        self.expected_success(202, resp.status)
-        return rest_client.ResponseBody(resp, body)
-
-    def update_volume_image_metadata(self, volume_id, **kwargs):
-        """Update image metadata for the volume.
-
-        For a full list of available parameters, please refer to the official
-        API reference:
-        http://developer.openstack.org/api-ref/block-storage/v2/#set-image-metadata-for-volume
-        """
-        post_body = json.dumps({'os-set_image_metadata': {'metadata': kwargs}})
-        url = "volumes/%s/action" % (volume_id)
-        resp, body = self.post(url, post_body)
-        body = json.loads(body)
-        self.expected_success(200, resp.status)
-        return rest_client.ResponseBody(resp, body)
-
-    def delete_volume_image_metadata(self, volume_id, key_name):
-        """Delete image metadata item for the volume."""
-        post_body = json.dumps({'os-unset_image_metadata': {'key': key_name}})
-        url = "volumes/%s/action" % (volume_id)
-        resp, body = self.post(url, post_body)
-        self.expected_success(200, resp.status)
-        return rest_client.ResponseBody(resp, body)
-
-    def show_volume_image_metadata(self, volume_id):
-        """Show image metadata for the volume."""
-        post_body = json.dumps({'os-show_image_metadata': {}})
-        url = "volumes/%s/action" % volume_id
-        resp, body = self.post(url, post_body)
-        body = json.loads(body)
-        self.expected_success(200, resp.status)
-        return rest_client.ResponseBody(resp, body)
-
-    def unmanage_volume(self, volume_id):
-        """Unmanage volume.
-
-        For a full list of available parameters, please refer to the official
-        API reference:
-        https://developer.openstack.org/api-ref/block-storage/v2/#unmanage-volume
-        """
-        post_body = json.dumps({'os-unmanage': {}})
-        resp, body = self.post('volumes/%s/action' % volume_id, post_body)
-        self.expected_success(202, resp.status)
-        return rest_client.ResponseBody(resp, body)
+VolumesClient = moves.moved_class(
+    volumes_client.VolumesClient, 'VolumesClient',
+    __name__, version="Rocky", removal_version='?')
diff --git a/tempest/lib/services/volume/v3/__init__.py b/tempest/lib/services/volume/v3/__init__.py
index 2d85553..a1b7de3 100644
--- a/tempest/lib/services/volume/v3/__init__.py
+++ b/tempest/lib/services/volume/v3/__init__.py
@@ -11,19 +11,44 @@
 # WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
 # License for the specific language governing permissions and limitations under
 # the License.
-
+from tempest.lib.services.volume.v3.availability_zone_client \
+    import AvailabilityZoneClient
 from tempest.lib.services.volume.v3.backups_client import BackupsClient
 from tempest.lib.services.volume.v3.base_client import BaseClient
+from tempest.lib.services.volume.v3.capabilities_client import \
+    CapabilitiesClient
+from tempest.lib.services.volume.v3.encryption_types_client import \
+    EncryptionTypesClient
+from tempest.lib.services.volume.v3.extensions_client import ExtensionsClient
 from tempest.lib.services.volume.v3.group_snapshots_client import \
     GroupSnapshotsClient
 from tempest.lib.services.volume.v3.group_types_client import GroupTypesClient
 from tempest.lib.services.volume.v3.groups_client import GroupsClient
+from tempest.lib.services.volume.v3.hosts_client import HostsClient
+from tempest.lib.services.volume.v3.limits_client import LimitsClient
 from tempest.lib.services.volume.v3.messages_client import MessagesClient
+from tempest.lib.services.volume.v3.qos_client import QosSpecsClient
+from tempest.lib.services.volume.v3.quota_classes_client import \
+    QuotaClassesClient
+from tempest.lib.services.volume.v3.quotas_client import QuotasClient
+from tempest.lib.services.volume.v3.scheduler_stats_client import \
+    SchedulerStatsClient
+from tempest.lib.services.volume.v3.services_client import ServicesClient
+from tempest.lib.services.volume.v3.snapshot_manage_client import \
+    SnapshotManageClient
 from tempest.lib.services.volume.v3.snapshots_client import SnapshotsClient
+from tempest.lib.services.volume.v3.transfers_client import TransfersClient
+from tempest.lib.services.volume.v3.types_client import TypesClient
 from tempest.lib.services.volume.v3.versions_client import VersionsClient
+from tempest.lib.services.volume.v3.volume_manage_client import \
+    VolumeManageClient
 from tempest.lib.services.volume.v3.volumes_client import VolumesClient
 
-__all__ = ['BackupsClient', 'BaseClient', 'GroupsClient',
-           'GroupSnapshotsClient', 'GroupTypesClient',
-           'MessagesClient', 'SnapshotsClient', 'VersionsClient',
-           'VolumesClient']
+__all__ = ['AvailabilityZoneClient', 'BackupsClient', 'BaseClient',
+           'CapabilitiesClient', 'EncryptionTypesClient', 'ExtensionsClient',
+           'GroupSnapshotsClient', 'GroupTypesClient', 'GroupsClient',
+           'HostsClient', 'LimitsClient', 'MessagesClient', 'QosSpecsClient',
+           'QuotaClassesClient', 'QuotasClient', 'SchedulerStatsClient',
+           'ServicesClient', 'SnapshotManageClient', 'SnapshotsClient',
+           'TransfersClient', 'TypesClient', 'VersionsClient',
+           'VolumeManageClient', 'VolumesClient']
diff --git a/tempest/lib/services/volume/v3/availability_zone_client.py b/tempest/lib/services/volume/v3/availability_zone_client.py
new file mode 100644
index 0000000..147e4c6
--- /dev/null
+++ b/tempest/lib/services/volume/v3/availability_zone_client.py
@@ -0,0 +1,27 @@
+# Copyright 2014 IBM Corp.
+# All Rights Reserved.
+#
+#    Licensed under the Apache License, Version 2.0 (the "License"); you may
+#    not use this file except in compliance with the License. You may obtain
+#    a copy of the License at
+#
+#         http://www.apache.org/licenses/LICENSE-2.0
+#
+#    Unless required by applicable law or agreed to in writing, software
+#    distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+#    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+#    License for the specific language governing permissions and limitations
+#    under the License.
+
+from oslo_serialization import jsonutils as json
+
+from tempest.lib.common import rest_client
+
+
+class AvailabilityZoneClient(rest_client.RestClient):
+
+    def list_availability_zones(self):
+        resp, body = self.get('os-availability-zone')
+        body = json.loads(body)
+        self.expected_success(200, resp.status)
+        return rest_client.ResponseBody(resp, body)
diff --git a/tempest/lib/services/volume/v3/backups_client.py b/tempest/lib/services/volume/v3/backups_client.py
index e742e39..10538b0 100644
--- a/tempest/lib/services/volume/v3/backups_client.py
+++ b/tempest/lib/services/volume/v3/backups_client.py
@@ -14,15 +14,30 @@
 #    under the License.
 
 from oslo_serialization import jsonutils as json
+from six.moves.urllib import parse as urllib
 
 from tempest.lib.common import rest_client
-from tempest.lib.services.volume.v2 import backups_client
+from tempest.lib import exceptions as lib_exc
+from tempest.lib.services.volume import base_client
 
 
-class BackupsClient(backups_client.BackupsClient):
+class BackupsClient(base_client.BaseClient):
     """Volume V3 Backups client"""
     api_version = "v3"
 
+    def create_backup(self, **kwargs):
+        """Creates a backup of volume.
+
+        For a full list of available parameters, please refer to the official
+        API reference:
+        https://developer.openstack.org/api-ref/block-storage/v3/index.html#create-a-backup
+        """
+        post_body = json.dumps({'backup': kwargs})
+        resp, body = self.post('backups', post_body)
+        body = json.loads(body)
+        self.expected_success(202, resp.status)
+        return rest_client.ResponseBody(resp, body)
+
     def update_backup(self, backup_id, **kwargs):
         """Updates the specified volume backup.
 
@@ -35,3 +50,83 @@
         body = json.loads(body)
         self.expected_success(200, resp.status)
         return rest_client.ResponseBody(resp, body)
+
+    def restore_backup(self, backup_id, **kwargs):
+        """Restore volume from backup.
+
+        For a full list of available parameters, please refer to the official
+        API reference:
+        https://developer.openstack.org/api-ref/block-storage/v3/index.html#restore-a-backup
+        """
+        post_body = json.dumps({'restore': kwargs})
+        resp, body = self.post('backups/%s/restore' % (backup_id), post_body)
+        body = json.loads(body)
+        self.expected_success(202, resp.status)
+        return rest_client.ResponseBody(resp, body)
+
+    def delete_backup(self, backup_id):
+        """Delete a backup of volume."""
+        resp, body = self.delete('backups/%s' % backup_id)
+        self.expected_success(202, resp.status)
+        return rest_client.ResponseBody(resp, body)
+
+    def show_backup(self, backup_id):
+        """Returns the details of a single backup."""
+        url = "backups/%s" % backup_id
+        resp, body = self.get(url)
+        body = json.loads(body)
+        self.expected_success(200, resp.status)
+        return rest_client.ResponseBody(resp, body)
+
+    def list_backups(self, detail=False, **params):
+        """List all the tenant's backups.
+
+        For a full list of available parameters, please refer to the official
+        API reference:
+        https://developer.openstack.org/api-ref/block-storage/v3/index.html#list-backups-for-project
+        https://developer.openstack.org/api-ref/block-storage/v3/index.html#list-backups-with-detail
+        """
+        url = "backups"
+        if detail:
+            url += "/detail"
+        if params:
+            url += '?%s' % urllib.urlencode(params)
+        resp, body = self.get(url)
+        body = json.loads(body)
+        self.expected_success(200, resp.status)
+        return rest_client.ResponseBody(resp, body)
+
+    def export_backup(self, backup_id):
+        """Export backup metadata record."""
+        url = "backups/%s/export_record" % backup_id
+        resp, body = self.get(url)
+        body = json.loads(body)
+        self.expected_success(200, resp.status)
+        return rest_client.ResponseBody(resp, body)
+
+    def import_backup(self, **kwargs):
+        """Import backup metadata record."""
+        post_body = json.dumps({'backup-record': kwargs})
+        resp, body = self.post("backups/import_record", post_body)
+        body = json.loads(body)
+        self.expected_success(201, resp.status)
+        return rest_client.ResponseBody(resp, body)
+
+    def reset_backup_status(self, backup_id, status):
+        """Reset the specified backup's status."""
+        post_body = json.dumps({'os-reset_status': {"status": status}})
+        resp, body = self.post('backups/%s/action' % backup_id, post_body)
+        self.expected_success(202, resp.status)
+        return rest_client.ResponseBody(resp, body)
+
+    def is_resource_deleted(self, id):
+        try:
+            self.show_backup(id)
+        except lib_exc.NotFound:
+            return True
+        return False
+
+    @property
+    def resource_type(self):
+        """Returns the primary type of resource this client works with."""
+        return 'backup'
diff --git a/tempest/lib/services/volume/v3/capabilities_client.py b/tempest/lib/services/volume/v3/capabilities_client.py
new file mode 100644
index 0000000..7ebcd69
--- /dev/null
+++ b/tempest/lib/services/volume/v3/capabilities_client.py
@@ -0,0 +1,34 @@
+# Copyright 2016 Red Hat, Inc.
+# All Rights Reserved.
+#
+#    Licensed under the Apache License, Version 2.0 (the "License"); you may
+#    not use this file except in compliance with the License. You may obtain
+#    a copy of the License at
+#
+#         http://www.apache.org/licenses/LICENSE-2.0
+#
+#    Unless required by applicable law or agreed to in writing, software
+#    distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+#    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+#    License for the specific language governing permissions and limitations
+#    under the License.
+
+from oslo_serialization import jsonutils as json
+
+from tempest.lib.common import rest_client
+
+
+class CapabilitiesClient(rest_client.RestClient):
+
+    def show_backend_capabilities(self, host):
+        """Shows capabilities for a storage back end.
+
+        For a full list of available parameters, please refer to the official
+        API reference:
+        https://developer.openstack.org/api-ref/block-storage/v2/index.html#show-back-end-capabilities
+        """
+        url = 'capabilities/%s' % host
+        resp, body = self.get(url)
+        body = json.loads(body)
+        self.expected_success(200, resp.status)
+        return rest_client.ResponseBody(resp, body)
diff --git a/tempest/lib/services/volume/v3/encryption_types_client.py b/tempest/lib/services/volume/v3/encryption_types_client.py
new file mode 100644
index 0000000..03de187
--- /dev/null
+++ b/tempest/lib/services/volume/v3/encryption_types_client.py
@@ -0,0 +1,90 @@
+# Copyright 2012 OpenStack Foundation
+# All Rights Reserved.
+#
+#    Licensed under the Apache License, Version 2.0 (the "License"); you may
+#    not use this file except in compliance with the License. You may obtain
+#    a copy of the License at
+#
+#         http://www.apache.org/licenses/LICENSE-2.0
+#
+#    Unless required by applicable law or agreed to in writing, software
+#    distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+#    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+#    License for the specific language governing permissions and limitations
+#    under the License.
+
+from oslo_serialization import jsonutils as json
+
+from tempest.lib.common import rest_client
+from tempest.lib import exceptions as lib_exc
+
+
+class EncryptionTypesClient(rest_client.RestClient):
+
+    def is_resource_deleted(self, id):
+        try:
+            body = self.show_encryption_type(id)
+            if not body:
+                return True
+        except lib_exc.NotFound:
+            return True
+        return False
+
+    @property
+    def resource_type(self):
+        """Returns the primary type of resource this client works with."""
+        return 'encryption-type'
+
+    def show_encryption_type(self, volume_type_id):
+        """Get the volume encryption type for the specified volume type.
+
+        :param volume_type_id: Id of volume type.
+        """
+        url = "/types/%s/encryption" % volume_type_id
+        resp, body = self.get(url)
+        body = json.loads(body)
+        self.expected_success(200, resp.status)
+        return rest_client.ResponseBody(resp, body)
+
+    def show_encryption_specs_item(self, volume_type_id, key):
+        """Get the encryption specs item for the specified volume type."""
+        url = "/types/%s/encryption/%s" % (volume_type_id, key)
+        resp, body = self.get(url)
+        body = json.loads(body)
+        self.expected_success(200, resp.status)
+        return rest_client.ResponseBody(resp, body)
+
+    def create_encryption_type(self, volume_type_id, **kwargs):
+        """Create encryption type.
+
+        For a full list of available parameters, please refer to the official
+        API reference:
+        https://developer.openstack.org/api-ref/block-storage/v3/index.html#create-an-encryption-type
+        """
+        url = "/types/%s/encryption" % volume_type_id
+        post_body = json.dumps({'encryption': kwargs})
+        resp, body = self.post(url, post_body)
+        body = json.loads(body)
+        self.expected_success(200, resp.status)
+        return rest_client.ResponseBody(resp, body)
+
+    def delete_encryption_type(self, volume_type_id):
+        """Delete the encryption type for the specified volume-type."""
+        resp, body = self.delete(
+            "/types/%s/encryption/provider" % volume_type_id)
+        self.expected_success(202, resp.status)
+        return rest_client.ResponseBody(resp, body)
+
+    def update_encryption_type(self, volume_type_id, **kwargs):
+        """Update an encryption type for an existing volume type.
+
+        For a full list of available parameters, please refer to the official
+        API reference:
+        https://developer.openstack.org/api-ref/block-storage/v3/index.html#update-an-encryption-type
+        """
+        url = "/types/%s/encryption/provider" % volume_type_id
+        put_body = json.dumps({'encryption': kwargs})
+        resp, body = self.put(url, put_body)
+        body = json.loads(body)
+        self.expected_success(200, resp.status)
+        return rest_client.ResponseBody(resp, body)
diff --git a/tempest/lib/services/volume/v3/extensions_client.py b/tempest/lib/services/volume/v3/extensions_client.py
new file mode 100644
index 0000000..45b7a56
--- /dev/null
+++ b/tempest/lib/services/volume/v3/extensions_client.py
@@ -0,0 +1,29 @@
+# Copyright 2014 IBM Corp.
+# All Rights Reserved.
+#
+#    Licensed under the Apache License, Version 2.0 (the "License"); you may
+#    not use this file except in compliance with the License. You may obtain
+#    a copy of the License at
+#
+#         http://www.apache.org/licenses/LICENSE-2.0
+#
+#    Unless required by applicable law or agreed to in writing, software
+#    distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+#    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+#    License for the specific language governing permissions and limitations
+#    under the License.
+
+from oslo_serialization import jsonutils as json
+
+from tempest.lib.common import rest_client
+
+
+class ExtensionsClient(rest_client.RestClient):
+    """Volume extensions client."""
+
+    def list_extensions(self):
+        url = 'extensions'
+        resp, body = self.get(url)
+        body = json.loads(body)
+        self.expected_success(200, resp.status)
+        return rest_client.ResponseBody(resp, body)
diff --git a/tempest/lib/services/volume/v3/hosts_client.py b/tempest/lib/services/volume/v3/hosts_client.py
new file mode 100644
index 0000000..8b65805
--- /dev/null
+++ b/tempest/lib/services/volume/v3/hosts_client.py
@@ -0,0 +1,47 @@
+# Copyright 2014 OpenStack Foundation
+# All Rights Reserved.
+#
+#    Licensed under the Apache License, Version 2.0 (the "License"); you may
+#    not use this file except in compliance with the License. You may obtain
+#    a copy of the License at
+#
+#         http://www.apache.org/licenses/LICENSE-2.0
+#
+#    Unless required by applicable law or agreed to in writing, software
+#    distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+#    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+#    License for the specific language governing permissions and limitations
+#    under the License.
+
+from oslo_serialization import jsonutils as json
+from six.moves.urllib import parse as urllib
+
+from tempest.lib.common import rest_client
+
+
+class HostsClient(rest_client.RestClient):
+    """Client class to send CRUD Volume API requests"""
+
+    def list_hosts(self, **params):
+        """Lists all hosts.
+
+        For a full list of available parameters, please refer to the official
+        API reference:
+        https://developer.openstack.org/api-ref/block-storage/v3/index.html#list-all-hosts-for-a-project
+        """
+        url = 'os-hosts'
+        if params:
+            url += '?%s' % urllib.urlencode(params)
+
+        resp, body = self.get(url)
+        body = json.loads(body)
+        self.expected_success(200, resp.status)
+        return rest_client.ResponseBody(resp, body)
+
+    def show_host(self, host_name):
+        """Show host details."""
+        url = 'os-hosts/%s' % host_name
+        resp, body = self.get(url)
+        self.expected_success(200, resp.status)
+        body = json.loads(body)
+        return rest_client.ResponseBody(resp, body)
diff --git a/tempest/lib/services/volume/v3/limits_client.py b/tempest/lib/services/volume/v3/limits_client.py
new file mode 100644
index 0000000..9500254
--- /dev/null
+++ b/tempest/lib/services/volume/v3/limits_client.py
@@ -0,0 +1,30 @@
+# Copyright 2016 Red Hat, Inc.
+# All Rights Reserved.
+#
+#    Licensed under the Apache License, Version 2.0 (the "License"); you may
+#    not use this file except in compliance with the License. You may obtain
+#    a copy of the License at
+#
+#         http://www.apache.org/licenses/LICENSE-2.0
+#
+#    Unless required by applicable law or agreed to in writing, software
+#    distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+#    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+#    License for the specific language governing permissions and limitations
+#    under the License.
+
+from oslo_serialization import jsonutils as json
+
+from tempest.lib.common import rest_client
+
+
+class LimitsClient(rest_client.RestClient):
+    """Volume limits client."""
+
+    def show_limits(self):
+        """Returns the details of a volume absolute limits."""
+        url = "limits"
+        resp, body = self.get(url)
+        body = json.loads(body)
+        self.expected_success(200, resp.status)
+        return rest_client.ResponseBody(resp, body)
diff --git a/tempest/lib/services/volume/v3/qos_client.py b/tempest/lib/services/volume/v3/qos_client.py
new file mode 100644
index 0000000..8f4d37f
--- /dev/null
+++ b/tempest/lib/services/volume/v3/qos_client.py
@@ -0,0 +1,131 @@
+# All Rights Reserved.
+#
+#    Licensed under the Apache License, Version 2.0 (the "License"); you may
+#    not use this file except in compliance with the License. You may obtain
+#    a copy of the License at
+#
+#         http://www.apache.org/licenses/LICENSE-2.0
+#
+#    Unless required by applicable law or agreed to in writing, software
+#    distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+#    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+#    License for the specific language governing permissions and limitations
+#    under the License.
+
+from oslo_serialization import jsonutils as json
+
+from tempest.lib.common import rest_client
+from tempest.lib import exceptions as lib_exc
+
+
+class QosSpecsClient(rest_client.RestClient):
+    """Volume QoS client.
+
+       Client class to send CRUD QoS API requests
+    """
+
+    def is_resource_deleted(self, qos_id):
+        try:
+            self.show_qos(qos_id)
+        except lib_exc.NotFound:
+            return True
+        return False
+
+    @property
+    def resource_type(self):
+        """Returns the primary type of resource this client works with."""
+        return 'qos'
+
+    def create_qos(self, **kwargs):
+        """Create a QoS Specification.
+
+        For a full list of available parameters, please refer to the official
+        API reference:
+        https://developer.openstack.org/api-ref/block-storage/v3/index.html#create-a-qos-specification
+        """
+        post_body = json.dumps({'qos_specs': kwargs})
+        resp, body = self.post('qos-specs', post_body)
+        self.expected_success(200, resp.status)
+        body = json.loads(body)
+        return rest_client.ResponseBody(resp, body)
+
+    def delete_qos(self, qos_id, force=False):
+        """Delete the specified QoS specification."""
+        resp, body = self.delete(
+            "qos-specs/%s?force=%s" % (qos_id, force))
+        self.expected_success(202, resp.status)
+        return rest_client.ResponseBody(resp, body)
+
+    def list_qos(self):
+        """List all the QoS specifications created."""
+        url = 'qos-specs'
+        resp, body = self.get(url)
+        body = json.loads(body)
+        self.expected_success(200, resp.status)
+        return rest_client.ResponseBody(resp, body)
+
+    def show_qos(self, qos_id):
+        """Get the specified QoS specification."""
+        url = "qos-specs/%s" % qos_id
+        resp, body = self.get(url)
+        body = json.loads(body)
+        self.expected_success(200, resp.status)
+        return rest_client.ResponseBody(resp, body)
+
+    def set_qos_key(self, qos_id, **kwargs):
+        """Set the specified keys/values of QoS specification.
+
+        For a full list of available parameters, please refer to the official
+        API reference:
+        https://developer.openstack.org/api-ref/block-storage/v3/index.html#set-keys-in-a-qos-specification
+        """
+        put_body = json.dumps({"qos_specs": kwargs})
+        resp, body = self.put('qos-specs/%s' % qos_id, put_body)
+        body = json.loads(body)
+        self.expected_success(200, resp.status)
+        return rest_client.ResponseBody(resp, body)
+
+    def unset_qos_key(self, qos_id, keys):
+        """Unset the specified keys of QoS specification.
+
+        :param keys: keys to delete from the QoS specification.
+
+        For a full list of available parameters, please refer to the official
+        API reference:
+        https://developer.openstack.org/api-ref/block-storage/v3/index.html#unset-keys-in-a-qos-specification
+        """
+        put_body = json.dumps({'keys': keys})
+        resp, body = self.put('qos-specs/%s/delete_keys' % qos_id, put_body)
+        self.expected_success(202, resp.status)
+        return rest_client.ResponseBody(resp, body)
+
+    def associate_qos(self, qos_id, vol_type_id):
+        """Associate the specified QoS with specified volume-type."""
+        url = "qos-specs/%s/associate" % qos_id
+        url += "?vol_type_id=%s" % vol_type_id
+        resp, body = self.get(url)
+        self.expected_success(202, resp.status)
+        return rest_client.ResponseBody(resp, body)
+
+    def show_association_qos(self, qos_id):
+        """Get the association of the specified QoS specification."""
+        url = "qos-specs/%s/associations" % qos_id
+        resp, body = self.get(url)
+        body = json.loads(body)
+        self.expected_success(200, resp.status)
+        return rest_client.ResponseBody(resp, body)
+
+    def disassociate_qos(self, qos_id, vol_type_id):
+        """Disassociate the specified QoS with specified volume-type."""
+        url = "qos-specs/%s/disassociate" % qos_id
+        url += "?vol_type_id=%s" % vol_type_id
+        resp, body = self.get(url)
+        self.expected_success(202, resp.status)
+        return rest_client.ResponseBody(resp, body)
+
+    def disassociate_all_qos(self, qos_id):
+        """Disassociate the specified QoS with all associations."""
+        url = "qos-specs/%s/disassociate_all" % qos_id
+        resp, body = self.get(url)
+        self.expected_success(202, resp.status)
+        return rest_client.ResponseBody(resp, body)
diff --git a/tempest/lib/services/volume/v3/quota_classes_client.py b/tempest/lib/services/volume/v3/quota_classes_client.py
new file mode 100644
index 0000000..a8eb536
--- /dev/null
+++ b/tempest/lib/services/volume/v3/quota_classes_client.py
@@ -0,0 +1,49 @@
+# Copyright 2017 FiberHome Telecommunication Technologies CO.,LTD
+# All Rights Reserved.
+#
+#    Licensed under the Apache License, Version 2.0 (the "License"); you may
+#    not use this file except in compliance with the License. You may obtain
+#    a copy of the License at
+#
+#         http://www.apache.org/licenses/LICENSE-2.0
+#
+#    Unless required by applicable law or agreed to in writing, software
+#    distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+#    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+#    License for the specific language governing permissions and limitations
+#    under the License.
+
+from oslo_serialization import jsonutils as json
+
+from tempest.lib.common import rest_client
+
+
+class QuotaClassesClient(rest_client.RestClient):
+    """Volume quota class client."""
+
+    def show_quota_class_set(self, quota_class_id):
+        """List quotas for a quota class.
+
+        For a full list of available parameters, please refer to the official
+        API reference:
+        https://developer.openstack.org/api-ref/block-storage/v3/index.html#show-quota-classes-for-a-project
+        """
+        url = 'os-quota-class-sets/%s' % quota_class_id
+        resp, body = self.get(url)
+        self.expected_success(200, resp.status)
+        body = json.loads(body)
+        return rest_client.ResponseBody(resp, body)
+
+    def update_quota_class_set(self, quota_class_id, **kwargs):
+        """Update quotas for a quota class.
+
+        For a full list of available parameters, please refer to the official
+        API reference:
+        https://developer.openstack.org/api-ref/block-storage/v3/index.html#update-quota-classes-for-a-project
+        """
+        url = 'os-quota-class-sets/%s' % quota_class_id
+        put_body = json.dumps({'quota_class_set': kwargs})
+        resp, body = self.put(url, put_body)
+        self.expected_success(200, resp.status)
+        body = json.loads(body)
+        return rest_client.ResponseBody(resp, body)
diff --git a/tempest/lib/services/volume/v3/quotas_client.py b/tempest/lib/services/volume/v3/quotas_client.py
new file mode 100644
index 0000000..538a915
--- /dev/null
+++ b/tempest/lib/services/volume/v3/quotas_client.py
@@ -0,0 +1,63 @@
+# Copyright 2014 OpenStack Foundation
+# All Rights Reserved.
+#
+#    Licensed under the Apache License, Version 2.0 (the "License"); you may
+#    not use this file except in compliance with the License. You may obtain
+#    a copy of the License at
+#
+#         http://www.apache.org/licenses/LICENSE-2.0
+#
+#    Unless required by applicable law or agreed to in writing, software
+#    distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+#    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+#    License for the specific language governing permissions and limitations
+#    under the License.
+
+from oslo_serialization import jsonutils
+from six.moves.urllib import parse as urllib
+
+from tempest.lib.common import rest_client
+
+
+class QuotasClient(rest_client.RestClient):
+    """Client class to send CRUD Volume Quotas API requests"""
+
+    def show_default_quota_set(self, tenant_id):
+        """List the default volume quota set for a tenant."""
+
+        url = 'os-quota-sets/%s/defaults' % tenant_id
+        resp, body = self.get(url)
+        self.expected_success(200, resp.status)
+        body = jsonutils.loads(body)
+        return rest_client.ResponseBody(resp, body)
+
+    def show_quota_set(self, tenant_id, params=None):
+        """List the quota set for a tenant."""
+
+        url = 'os-quota-sets/%s' % tenant_id
+        if params:
+            url += '?%s' % urllib.urlencode(params)
+
+        resp, body = self.get(url)
+        self.expected_success(200, resp.status)
+        body = jsonutils.loads(body)
+        return rest_client.ResponseBody(resp, body)
+
+    def update_quota_set(self, tenant_id, **kwargs):
+        """Updates quota set
+
+        For a full list of available parameters, please refer to the official
+        API reference:
+        https://developer.openstack.org/api-ref/block-storage/v3/index.html#update-quotas-for-a-project
+        """
+        put_body = jsonutils.dumps({'quota_set': kwargs})
+        resp, body = self.put('os-quota-sets/%s' % tenant_id, put_body)
+        self.expected_success(200, resp.status)
+        body = jsonutils.loads(body)
+        return rest_client.ResponseBody(resp, body)
+
+    def delete_quota_set(self, tenant_id):
+        """Delete the tenant's quota set."""
+        resp, body = self.delete('os-quota-sets/%s' % tenant_id)
+        self.expected_success(200, resp.status)
+        return rest_client.ResponseBody(resp, body)
diff --git a/tempest/lib/services/volume/v3/scheduler_stats_client.py b/tempest/lib/services/volume/v3/scheduler_stats_client.py
new file mode 100644
index 0000000..9b80851
--- /dev/null
+++ b/tempest/lib/services/volume/v3/scheduler_stats_client.py
@@ -0,0 +1,36 @@
+# Copyright 2016 Red Hat, Inc.
+# All Rights Reserved.
+#
+#    Licensed under the Apache License, Version 2.0 (the "License"); you may
+#    not use this file except in compliance with the License. You may obtain
+#    a copy of the License at
+#
+#         http://www.apache.org/licenses/LICENSE-2.0
+#
+#    Unless required by applicable law or agreed to in writing, software
+#    distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+#    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+#    License for the specific language governing permissions and limitations
+#    under the License.
+
+from oslo_serialization import jsonutils as json
+
+from tempest.lib.common import rest_client
+
+
+class SchedulerStatsClient(rest_client.RestClient):
+
+    def list_pools(self, detail=False):
+        """List all the volumes pools (hosts).
+
+        For a full list of available parameters, please refer to the official
+        API reference:
+        https://developer.openstack.org/api-ref/block-storage/v3/index.html#list-all-back-end-storage-pools
+        """
+        url = 'scheduler-stats/get_pools'
+        if detail:
+            url += '?detail=True'
+        resp, body = self.get(url)
+        body = json.loads(body)
+        self.expected_success(200, resp.status)
+        return rest_client.ResponseBody(resp, body)
diff --git a/tempest/lib/services/volume/v3/services_client.py b/tempest/lib/services/volume/v3/services_client.py
new file mode 100644
index 0000000..22155a9
--- /dev/null
+++ b/tempest/lib/services/volume/v3/services_client.py
@@ -0,0 +1,102 @@
+# Copyright 2014 OpenStack Foundation
+# All Rights Reserved.
+#
+#    Licensed under the Apache License, Version 2.0 (the "License"); you may
+#    not use this file except in compliance with the License. You may obtain
+#    a copy of the License at
+#
+#         http://www.apache.org/licenses/LICENSE-2.0
+#
+#    Unless required by applicable law or agreed to in writing, software
+#    distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+#    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+#    License for the specific language governing permissions and limitations
+#    under the License.
+
+from oslo_serialization import jsonutils as json
+from six.moves.urllib import parse as urllib
+
+from tempest.lib.common import rest_client
+
+
+class ServicesClient(rest_client.RestClient):
+    """Client class to send CRUD Volume Services API requests"""
+
+    def list_services(self, **params):
+        """List all Cinder services.
+
+        For a full list of available parameters, please refer to the official
+        API reference:
+        https://developer.openstack.org/api-ref/block-storage/v3/#list-all-cinder-services
+        """
+        url = 'os-services'
+        if params:
+            url += '?%s' % urllib.urlencode(params)
+
+        resp, body = self.get(url)
+        body = json.loads(body)
+        self.expected_success(200, resp.status)
+        return rest_client.ResponseBody(resp, body)
+
+    def enable_service(self, **kwargs):
+        """Enable service on a host.
+
+        For a full list of available parameters, please refer to the official
+        API reference:
+        https://developer.openstack.org/api-ref/block-storage/v3/#enable-a-cinder-service
+        """
+        put_body = json.dumps(kwargs)
+        resp, body = self.put('os-services/enable', put_body)
+        body = json.loads(body)
+        self.expected_success(200, resp.status)
+        return rest_client.ResponseBody(resp, body)
+
+    def disable_service(self, **kwargs):
+        """Disable service on a host.
+
+        For a full list of available parameters, please refer to the official
+        API reference:
+        https://developer.openstack.org/api-ref/block-storage/v3/#disable-a-cinder-service
+        """
+        put_body = json.dumps(kwargs)
+        resp, body = self.put('os-services/disable', put_body)
+        body = json.loads(body)
+        self.expected_success(200, resp.status)
+        return rest_client.ResponseBody(resp, body)
+
+    def disable_log_reason(self, **kwargs):
+        """Disable scheduling for a volume service and log disabled reason.
+
+        For a full list of available parameters, please refer to the official
+        API reference:
+        https://developer.openstack.org/api-ref/block-storage/v3/#log-disabled-cinder-service-information
+        """
+        put_body = json.dumps(kwargs)
+        resp, body = self.put('os-services/disable-log-reason', put_body)
+        body = json.loads(body)
+        self.expected_success(200, resp.status)
+        return rest_client.ResponseBody(resp, body)
+
+    def freeze_host(self, **kwargs):
+        """Freeze a Cinder backend host.
+
+        For a full list of available parameters, please refer to the official
+        API reference:
+        https://developer.openstack.org/api-ref/block-storage/v3/#freeze-a-cinder-backend-host
+        """
+        put_body = json.dumps(kwargs)
+        resp, _ = self.put('os-services/freeze', put_body)
+        self.expected_success(200, resp.status)
+        return rest_client.ResponseBody(resp)
+
+    def thaw_host(self, **kwargs):
+        """Thaw a Cinder backend host.
+
+        For a full list of available parameters, please refer to the official
+        API reference:
+        https://developer.openstack.org/api-ref/block-storage/v3/#thaw-a-cinder-backend-host
+        """
+        put_body = json.dumps(kwargs)
+        resp, _ = self.put('os-services/thaw', put_body)
+        self.expected_success(200, resp.status)
+        return rest_client.ResponseBody(resp)
diff --git a/tempest/lib/services/volume/v3/snapshot_manage_client.py b/tempest/lib/services/volume/v3/snapshot_manage_client.py
new file mode 100644
index 0000000..43fd328
--- /dev/null
+++ b/tempest/lib/services/volume/v3/snapshot_manage_client.py
@@ -0,0 +1,31 @@
+# Copyright 2016 Red Hat, Inc.
+# All Rights Reserved.
+#
+#    Licensed under the Apache License, Version 2.0 (the "License"); you may
+#    not use this file except in compliance with the License. You may obtain
+#    a copy of the License at
+#
+#         http://www.apache.org/licenses/LICENSE-2.0
+#
+#    Unless required by applicable law or agreed to in writing, software
+#    distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+#    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+#    License for the specific language governing permissions and limitations
+#    under the License.
+
+from oslo_serialization import jsonutils as json
+
+from tempest.lib.common import rest_client
+
+
+class SnapshotManageClient(rest_client.RestClient):
+    """Snapshot manage client."""
+
+    def manage_snapshot(self, **kwargs):
+        """Manage a snapshot."""
+        post_body = json.dumps({'snapshot': kwargs})
+        url = 'os-snapshot-manage'
+        resp, body = self.post(url, post_body)
+        self.expected_success(202, resp.status)
+        body = json.loads(body)
+        return rest_client.ResponseBody(resp, body)
diff --git a/tempest/lib/services/volume/v3/snapshots_client.py b/tempest/lib/services/volume/v3/snapshots_client.py
index 88c094f..08e6c94 100644
--- a/tempest/lib/services/volume/v3/snapshots_client.py
+++ b/tempest/lib/services/volume/v3/snapshots_client.py
@@ -13,9 +13,200 @@
 #    License for the specific language governing permissions and limitations
 #    under the License.
 
-from tempest.lib.services.volume.v2 import snapshots_client
+from oslo_serialization import jsonutils as json
+from six.moves.urllib import parse as urllib
+
+from tempest.lib.common import rest_client
+from tempest.lib import exceptions as lib_exc
 
 
-class SnapshotsClient(snapshots_client.SnapshotsClient):
+class SnapshotsClient(rest_client.RestClient):
     """Client class to send CRUD Volume Snapshot V3 API requests."""
     api_version = "v3"
+    create_resp = 202
+
+    def list_snapshots(self, detail=False, **params):
+        """List all the snapshot.
+
+        For a full list of available parameters, please refer to the official
+        API reference:
+        https://developer.openstack.org/api-ref/block-storage/v3/index.html#list-accessible-snapshots
+        https://developer.openstack.org/api-ref/block-storage/v3/index.html#list-snapshots-and-details
+        """
+        url = 'snapshots'
+        if detail:
+            url += '/detail'
+        if params:
+            url += '?%s' % urllib.urlencode(params)
+
+        resp, body = self.get(url)
+        body = json.loads(body)
+        self.expected_success(200, resp.status)
+        return rest_client.ResponseBody(resp, body)
+
+    def show_snapshot(self, snapshot_id):
+        """Returns the details of a single snapshot.
+
+        For a full list of available parameters, please refer to the official
+        API reference:
+        https://developer.openstack.org/api-ref/block-storage/v3/index.html#show-a-snapshot-s-details
+        """
+        url = "snapshots/%s" % snapshot_id
+        resp, body = self.get(url)
+        body = json.loads(body)
+        self.expected_success(200, resp.status)
+        return rest_client.ResponseBody(resp, body)
+
+    def create_snapshot(self, **kwargs):
+        """Creates a new snapshot.
+
+        For a full list of available parameters, please refer to the official
+        API reference:
+        https://developer.openstack.org/api-ref/block-storage/v3/index.html#create-a-snapshot
+        """
+        post_body = json.dumps({'snapshot': kwargs})
+        resp, body = self.post('snapshots', post_body)
+        body = json.loads(body)
+        self.expected_success(self.create_resp, resp.status)
+        return rest_client.ResponseBody(resp, body)
+
+    def update_snapshot(self, snapshot_id, **kwargs):
+        """Updates a snapshot.
+
+        For a full list of available parameters, please refer to the official
+        API reference:
+        https://developer.openstack.org/api-ref/block-storage/v3/index.html#update-a-snapshot
+        """
+        put_body = json.dumps({'snapshot': kwargs})
+        resp, body = self.put('snapshots/%s' % snapshot_id, put_body)
+        body = json.loads(body)
+        self.expected_success(200, resp.status)
+        return rest_client.ResponseBody(resp, body)
+
+    def delete_snapshot(self, snapshot_id):
+        """Delete Snapshot.
+
+        For a full list of available parameters, please refer to the official
+        API reference:
+        https://developer.openstack.org/api-ref/block-storage/v3/index.html#delete-a-snapshot
+        """
+        resp, body = self.delete("snapshots/%s" % snapshot_id)
+        self.expected_success(202, resp.status)
+        return rest_client.ResponseBody(resp, body)
+
+    def is_resource_deleted(self, id):
+        try:
+            self.show_snapshot(id)
+        except lib_exc.NotFound:
+            return True
+        return False
+
+    @property
+    def resource_type(self):
+        """Returns the primary type of resource this client works with."""
+        return 'volume-snapshot'
+
+    def reset_snapshot_status(self, snapshot_id, status):
+        """Reset the specified snapshot's status."""
+        post_body = json.dumps({'os-reset_status': {"status": status}})
+        resp, body = self.post('snapshots/%s/action' % snapshot_id, post_body)
+        self.expected_success(202, resp.status)
+        return rest_client.ResponseBody(resp, body)
+
+    def update_snapshot_status(self, snapshot_id, **kwargs):
+        """Update status of a snapshot.
+
+        For a full list of available parameters, please refer to the official
+        API reference:
+        https://developer.openstack.org/api-ref/block-storage/v3/#update-status-of-a-snapshot
+        """
+        post_body = json.dumps({'os-update_snapshot_status': kwargs})
+        url = 'snapshots/%s/action' % snapshot_id
+        resp, body = self.post(url, post_body)
+        self.expected_success(202, resp.status)
+        return rest_client.ResponseBody(resp, body)
+
+    def create_snapshot_metadata(self, snapshot_id, metadata):
+        """Create metadata for the snapshot.
+
+        For a full list of available parameters, please refer to the official
+        API reference:
+        https://developer.openstack.org/api-ref/block-storage/v3/index.html#create-a-snapshot-s-metadata
+        """
+        put_body = json.dumps({'metadata': metadata})
+        url = "snapshots/%s/metadata" % snapshot_id
+        resp, body = self.post(url, put_body)
+        body = json.loads(body)
+        self.expected_success(200, resp.status)
+        return rest_client.ResponseBody(resp, body)
+
+    def show_snapshot_metadata(self, snapshot_id):
+        """Get metadata of the snapshot.
+
+        For a full list of available parameters, please refer to the official
+        API reference:
+        https://developer.openstack.org/api-ref/block-storage/v3/index.html#show-a-snapshot-s-metadata
+        """
+        url = "snapshots/%s/metadata" % snapshot_id
+        resp, body = self.get(url)
+        body = json.loads(body)
+        self.expected_success(200, resp.status)
+        return rest_client.ResponseBody(resp, body)
+
+    def update_snapshot_metadata(self, snapshot_id, **kwargs):
+        """Update metadata for the snapshot.
+
+        For a full list of available parameters, please refer to the official
+        API reference:
+        https://developer.openstack.org/api-ref/block-storage/v3/index.html#update-a-snapshot-s-metadata
+        """
+        put_body = json.dumps(kwargs)
+        url = "snapshots/%s/metadata" % snapshot_id
+        resp, body = self.put(url, put_body)
+        body = json.loads(body)
+        self.expected_success(200, resp.status)
+        return rest_client.ResponseBody(resp, body)
+
+    def show_snapshot_metadata_item(self, snapshot_id, id):
+        """Show metadata item for the snapshot."""
+        url = "snapshots/%s/metadata/%s" % (snapshot_id, id)
+        resp, body = self.get(url)
+        body = json.loads(body)
+        self.expected_success(200, resp.status)
+        return rest_client.ResponseBody(resp, body)
+
+    def update_snapshot_metadata_item(self, snapshot_id, id, **kwargs):
+        """Update metadata for the snapshot for a specific key.
+
+        For a full list of available parameters, please refer to the official
+        API reference:
+        https://developer.openstack.org/api-ref/block-storage/v3/#update-a-snapshot-s-metadata-for-a-specific-key
+        """
+        put_body = json.dumps(kwargs)
+        url = "snapshots/%s/metadata/%s" % (snapshot_id, id)
+        resp, body = self.put(url, put_body)
+        body = json.loads(body)
+        self.expected_success(200, resp.status)
+        return rest_client.ResponseBody(resp, body)
+
+    def delete_snapshot_metadata_item(self, snapshot_id, id):
+        """Delete metadata item for the snapshot."""
+        url = "snapshots/%s/metadata/%s" % (snapshot_id, id)
+        resp, body = self.delete(url)
+        self.expected_success(200, resp.status)
+        return rest_client.ResponseBody(resp, body)
+
+    def force_delete_snapshot(self, snapshot_id):
+        """Force Delete Snapshot."""
+        post_body = json.dumps({'os-force_delete': {}})
+        resp, body = self.post('snapshots/%s/action' % snapshot_id, post_body)
+        self.expected_success(202, resp.status)
+        return rest_client.ResponseBody(resp, body)
+
+    def unmanage_snapshot(self, snapshot_id):
+        """Unmanage a snapshot."""
+        post_body = json.dumps({'os-unmanage': {}})
+        url = 'snapshots/%s/action' % (snapshot_id)
+        resp, body = self.post(url, post_body)
+        self.expected_success(202, resp.status)
+        return rest_client.ResponseBody(resp, body)
diff --git a/tempest/lib/services/volume/v3/transfers_client.py b/tempest/lib/services/volume/v3/transfers_client.py
new file mode 100644
index 0000000..97c5597
--- /dev/null
+++ b/tempest/lib/services/volume/v3/transfers_client.py
@@ -0,0 +1,82 @@
+# Copyright 2012 OpenStack Foundation
+# All Rights Reserved.
+#
+#    Licensed under the Apache License, Version 2.0 (the "License"); you may
+#    not use this file except in compliance with the License. You may obtain
+#    a copy of the License at
+#
+#         http://www.apache.org/licenses/LICENSE-2.0
+#
+#    Unless required by applicable law or agreed to in writing, software
+#    distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+#    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+#    License for the specific language governing permissions and limitations
+#    under the License.
+
+from oslo_serialization import jsonutils as json
+from six.moves.urllib import parse as urllib
+
+from tempest.lib.common import rest_client
+
+
+class TransfersClient(rest_client.RestClient):
+    """Client class to send CRUD Volume Transfer API requests"""
+
+    def create_volume_transfer(self, **kwargs):
+        """Create a volume transfer.
+
+        For a full list of available parameters, please refer to the official
+        API reference:
+        https://developer.openstack.org/api-ref/block-storage/v3/index.html#create-a-volume-transfer
+        """
+        post_body = json.dumps({'transfer': kwargs})
+        resp, body = self.post('os-volume-transfer', post_body)
+        body = json.loads(body)
+        self.expected_success(202, resp.status)
+        return rest_client.ResponseBody(resp, body)
+
+    def show_volume_transfer(self, transfer_id):
+        """Returns the details of a volume transfer."""
+        url = "os-volume-transfer/%s" % transfer_id
+        resp, body = self.get(url)
+        body = json.loads(body)
+        self.expected_success(200, resp.status)
+        return rest_client.ResponseBody(resp, body)
+
+    def list_volume_transfers(self, detail=False, **params):
+        """List all the volume transfers created.
+
+        For a full list of available parameters, please refer to the official
+        API reference:
+        https://developer.openstack.org/api-ref/block-storage/v3/index.html#list-volume-transfers-for-a-project
+        https://developer.openstack.org/api-ref/block-storage/v3/index.html#list-volume-transfers-and-details
+        """
+        url = 'os-volume-transfer'
+        if detail:
+            url += '/detail'
+        if params:
+            url += '?%s' % urllib.urlencode(params)
+        resp, body = self.get(url)
+        body = json.loads(body)
+        self.expected_success(200, resp.status)
+        return rest_client.ResponseBody(resp, body)
+
+    def delete_volume_transfer(self, transfer_id):
+        """Delete a volume transfer."""
+        resp, body = self.delete("os-volume-transfer/%s" % transfer_id)
+        self.expected_success(202, resp.status)
+        return rest_client.ResponseBody(resp, body)
+
+    def accept_volume_transfer(self, transfer_id, **kwargs):
+        """Accept a volume transfer.
+
+        For a full list of available parameters, please refer to the official
+        API reference:
+        https://developer.openstack.org/api-ref/block-storage/v3/index.html#accept-a-volume-transfer
+        """
+        url = 'os-volume-transfer/%s/accept' % transfer_id
+        post_body = json.dumps({'accept': kwargs})
+        resp, body = self.post(url, post_body)
+        body = json.loads(body)
+        self.expected_success(202, resp.status)
+        return rest_client.ResponseBody(resp, body)
diff --git a/tempest/lib/services/volume/v3/types_client.py b/tempest/lib/services/volume/v3/types_client.py
new file mode 100644
index 0000000..13ecd15
--- /dev/null
+++ b/tempest/lib/services/volume/v3/types_client.py
@@ -0,0 +1,204 @@
+# Copyright 2012 OpenStack Foundation
+# All Rights Reserved.
+#
+#    Licensed under the Apache License, Version 2.0 (the "License"); you may
+#    not use this file except in compliance with the License. You may obtain
+#    a copy of the License at
+#
+#         http://www.apache.org/licenses/LICENSE-2.0
+#
+#    Unless required by applicable law or agreed to in writing, software
+#    distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+#    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+#    License for the specific language governing permissions and limitations
+#    under the License.
+
+from oslo_serialization import jsonutils as json
+from six.moves.urllib import parse as urllib
+
+from tempest.lib.common import rest_client
+from tempest.lib import exceptions as lib_exc
+
+
+class TypesClient(rest_client.RestClient):
+    """Client class to send CRUD Volume Types API requests"""
+
+    def is_resource_deleted(self, id):
+        try:
+            self.show_volume_type(id)
+        except lib_exc.NotFound:
+            return True
+        return False
+
+    @property
+    def resource_type(self):
+        """Returns the primary type of resource this client works with."""
+        return 'volume-type'
+
+    def list_volume_types(self, **params):
+        """List all the volume types created.
+
+        For a full list of available parameters, please refer to the official
+        API reference:
+        https://developer.openstack.org/api-ref/block-storage/v3/index.html#list-all-volume-types
+        """
+        url = 'types'
+        if params:
+            url += '?%s' % urllib.urlencode(params)
+
+        resp, body = self.get(url)
+        body = json.loads(body)
+        self.expected_success(200, resp.status)
+        return rest_client.ResponseBody(resp, body)
+
+    def show_volume_type(self, volume_type_id):
+        """Returns the details of a single volume type.
+
+        For a full list of available parameters, please refer to the official
+        API reference:
+        https://developer.openstack.org/api-ref/block-storage/v3/index.html#show-volume-type-detail
+        """
+        url = "types/%s" % volume_type_id
+        resp, body = self.get(url)
+        body = json.loads(body)
+        self.expected_success(200, resp.status)
+        return rest_client.ResponseBody(resp, body)
+
+    def create_volume_type(self, **kwargs):
+        """Create volume type.
+
+        For a full list of available parameters, please refer to the official
+        API reference:
+        https://developer.openstack.org/api-ref/block-storage/v3/index.html#create-a-volume-type
+        """
+        post_body = json.dumps({'volume_type': kwargs})
+        resp, body = self.post('types', post_body)
+        body = json.loads(body)
+        self.expected_success(200, resp.status)
+        return rest_client.ResponseBody(resp, body)
+
+    def delete_volume_type(self, volume_type_id):
+        """Deletes the specified volume type.
+
+        For a full list of available parameters, please refer to the official
+        API reference:
+        https://developer.openstack.org/api-ref/block-storage/v3/index.html#delete-a-volume-type
+        """
+        resp, body = self.delete("types/%s" % volume_type_id)
+        self.expected_success(202, resp.status)
+        return rest_client.ResponseBody(resp, body)
+
+    def list_volume_types_extra_specs(self, volume_type_id, **params):
+        """List all the volume type extra specs created.
+
+        For a full list of available parameters, please refer to the official
+        API reference:
+        https://developer.openstack.org/api-ref/block-storage/v3/#show-all-extra-specifications-for-volume-type
+        """
+        url = 'types/%s/extra_specs' % volume_type_id
+        if params:
+            url += '?%s' % urllib.urlencode(params)
+
+        resp, body = self.get(url)
+        body = json.loads(body)
+        self.expected_success(200, resp.status)
+        return rest_client.ResponseBody(resp, body)
+
+    def show_volume_type_extra_specs(self, volume_type_id, extra_specs_name):
+        """Returns the details of a single volume type extra spec."""
+        url = "types/%s/extra_specs/%s" % (volume_type_id, extra_specs_name)
+        resp, body = self.get(url)
+        body = json.loads(body)
+        self.expected_success(200, resp.status)
+        return rest_client.ResponseBody(resp, body)
+
+    def create_volume_type_extra_specs(self, volume_type_id, extra_specs):
+        """Creates new volume type extra specs.
+
+        :param volume_type_id: Id of volume type.
+        :param extra_specs: A dictionary of values to be used as extra_specs.
+        """
+        url = "types/%s/extra_specs" % volume_type_id
+        post_body = json.dumps({'extra_specs': extra_specs})
+        resp, body = self.post(url, post_body)
+        body = json.loads(body)
+        self.expected_success(200, resp.status)
+        return rest_client.ResponseBody(resp, body)
+
+    def delete_volume_type_extra_specs(self, volume_type_id, extra_spec_name):
+        """Deletes the specified volume type extra spec."""
+        resp, body = self.delete("types/%s/extra_specs/%s" % (
+            volume_type_id, extra_spec_name))
+        self.expected_success(202, resp.status)
+        return rest_client.ResponseBody(resp, body)
+
+    def update_volume_type(self, volume_type_id, **kwargs):
+        """Updates volume type name, description, and/or is_public.
+
+        For a full list of available parameters, please refer to the official
+        API reference:
+        https://developer.openstack.org/api-ref/block-storage/v3/index.html#update-a-volume-type
+        """
+        put_body = json.dumps({'volume_type': kwargs})
+        resp, body = self.put('types/%s' % volume_type_id, put_body)
+        body = json.loads(body)
+        self.expected_success(200, resp.status)
+        return rest_client.ResponseBody(resp, body)
+
+    def update_volume_type_extra_specs(self, volume_type_id, extra_spec_name,
+                                       extra_specs):
+        """Update a volume_type extra spec.
+
+        :param volume_type_id: Id of volume type.
+        :param extra_spec_name: Name of the extra spec to be updated.
+        :param extra_specs: A dictionary of with key as extra_spec_name and the
+                            updated value.
+        For a full list of available parameters, please refer to the official
+        API reference:
+        https://developer.openstack.org/api-ref/block-storage/v3/index.html#update-extra-specification-for-volume-type
+        """
+        url = "types/%s/extra_specs/%s" % (volume_type_id, extra_spec_name)
+        put_body = json.dumps(extra_specs)
+        resp, body = self.put(url, put_body)
+        body = json.loads(body)
+        self.expected_success(200, resp.status)
+        return rest_client.ResponseBody(resp, body)
+
+    def add_type_access(self, volume_type_id, **kwargs):
+        """Adds volume type access for the given project.
+
+        For a full list of available parameters, please refer to the official
+        API reference:
+        https://developer.openstack.org/api-ref/block-storage/v3/index.html#add-private-volume-type-access-to-project
+        """
+        post_body = json.dumps({'addProjectAccess': kwargs})
+        url = 'types/%s/action' % volume_type_id
+        resp, body = self.post(url, post_body)
+        self.expected_success(202, resp.status)
+        return rest_client.ResponseBody(resp, body)
+
+    def remove_type_access(self, volume_type_id, **kwargs):
+        """Removes volume type access for the given project.
+
+        For a full list of available parameters, please refer to the official
+        API reference:
+        https://developer.openstack.org/api-ref/block-storage/v3/index.html#remove-private-volume-type-access-from-project
+        """
+        post_body = json.dumps({'removeProjectAccess': kwargs})
+        url = 'types/%s/action' % volume_type_id
+        resp, body = self.post(url, post_body)
+        self.expected_success(202, resp.status)
+        return rest_client.ResponseBody(resp, body)
+
+    def list_type_access(self, volume_type_id):
+        """Print access information about the given volume type.
+
+        For a full list of available parameters, please refer to the official
+        API reference:
+        https://developer.openstack.org/api-ref/block-storage/v3/index.html#list-private-volume-type-access-detail
+        """
+        url = 'types/%s/os-volume-type-access' % volume_type_id
+        resp, body = self.get(url)
+        body = json.loads(body)
+        self.expected_success(200, resp.status)
+        return rest_client.ResponseBody(resp, body)
diff --git a/tempest/lib/services/volume/v3/volume_manage_client.py b/tempest/lib/services/volume/v3/volume_manage_client.py
new file mode 100644
index 0000000..349e11d
--- /dev/null
+++ b/tempest/lib/services/volume/v3/volume_manage_client.py
@@ -0,0 +1,35 @@
+# Copyright 2017 FiberHome Telecommunication Technologies CO.,LTD
+# All Rights Reserved.
+#
+#    Licensed under the Apache License, Version 2.0 (the "License"); you may
+#    not use this file except in compliance with the License. You may obtain
+#    a copy of the License at
+#
+#         http://www.apache.org/licenses/LICENSE-2.0
+#
+#    Unless required by applicable law or agreed to in writing, software
+#    distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+#    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+#    License for the specific language governing permissions and limitations
+#    under the License.
+
+from oslo_serialization import jsonutils as json
+
+from tempest.lib.common import rest_client
+
+
+class VolumeManageClient(rest_client.RestClient):
+    """Volume manage client."""
+
+    def manage_volume(self, **kwargs):
+        """Manage existing volume.
+
+        For a full list of available parameters, please refer to the official
+        API reference:
+        https://developer.openstack.org/api-ref/block-storage/v3/index.html#manage-an-existing-volume
+        """
+        post_body = json.dumps({'volume': kwargs})
+        resp, body = self.post('os-volume-manage', post_body)
+        self.expected_success(202, resp.status)
+        body = json.loads(body)
+        return rest_client.ResponseBody(resp, body)
diff --git a/tempest/lib/services/volume/v3/volumes_client.py b/tempest/lib/services/volume/v3/volumes_client.py
index 5f4b278..a1185c4 100644
--- a/tempest/lib/services/volume/v3/volumes_client.py
+++ b/tempest/lib/services/volume/v3/volumes_client.py
@@ -14,16 +14,96 @@
 #    under the License.
 
 from oslo_serialization import jsonutils as json
+import six
 from six.moves.urllib import parse as urllib
 
 from tempest.lib.common import rest_client
-from tempest.lib.services.volume.v2 import volumes_client
+from tempest.lib import exceptions as lib_exc
+from tempest.lib.services.volume import base_client
 
 
-class VolumesClient(volumes_client.VolumesClient):
+class VolumesClient(base_client.BaseClient):
     """Client class to send CRUD Volume V3 API requests"""
     api_version = "v3"
 
+    def _prepare_params(self, params):
+        """Prepares params for use in get or _ext_get methods.
+
+        If params is a string it will be left as it is, but if it's not it will
+        be urlencoded.
+        """
+        if isinstance(params, six.string_types):
+            return params
+        return urllib.urlencode(params)
+
+    def list_volumes(self, detail=False, params=None):
+        """List all the volumes created.
+
+        Params can be a string (must be urlencoded) or a dictionary.
+        For a full list of available parameters, please refer to the official
+        API reference:
+        https://developer.openstack.org/api-ref/block-storage/v3/index.html#list-accessible-volumes-with-details
+        https://developer.openstack.org/api-ref/block-storage/v3/index.html#list-accessible-volumes
+        """
+        url = 'volumes'
+        if detail:
+            url += '/detail'
+        if params:
+            url += '?%s' % self._prepare_params(params)
+
+        resp, body = self.get(url)
+        body = json.loads(body)
+        self.expected_success(200, resp.status)
+        return rest_client.ResponseBody(resp, body)
+
+    def show_volume(self, volume_id):
+        """Returns the details of a single volume."""
+        url = "volumes/%s" % volume_id
+        resp, body = self.get(url)
+        body = json.loads(body)
+        self.expected_success(200, resp.status)
+        return rest_client.ResponseBody(resp, body)
+
+    def create_volume(self, **kwargs):
+        """Creates a new Volume.
+
+        For a full list of available parameters, please refer to the official
+        API reference:
+        https://developer.openstack.org/api-ref/block-storage/v3/index.html#create-a-volume
+        """
+        post_body = json.dumps({'volume': kwargs})
+        resp, body = self.post('volumes', post_body)
+        body = json.loads(body)
+        self.expected_success(202, resp.status)
+        return rest_client.ResponseBody(resp, body)
+
+    def update_volume(self, volume_id, **kwargs):
+        """Updates the Specified Volume.
+
+        For a full list of available parameters, please refer to the official
+        API reference:
+        https://developer.openstack.org/api-ref/block-storage/v3/index.html#update-a-volume
+        """
+        put_body = json.dumps({'volume': kwargs})
+        resp, body = self.put('volumes/%s' % volume_id, put_body)
+        body = json.loads(body)
+        self.expected_success(200, resp.status)
+        return rest_client.ResponseBody(resp, body)
+
+    def delete_volume(self, volume_id, **params):
+        """Deletes the Specified Volume.
+
+        For a full list of available parameters, please refer to the official
+        API reference:
+        https://developer.openstack.org/api-ref/block-storage/v3/index.html#delete-a-volume
+        """
+        url = 'volumes/%s' % volume_id
+        if params:
+            url += '?%s' % urllib.urlencode(params)
+        resp, body = self.delete(url)
+        self.expected_success(202, resp.status)
+        return rest_client.ResponseBody(resp, body)
+
     def show_volume_summary(self, **params):
         """Get volumes summary.
 
@@ -38,3 +118,250 @@
         body = json.loads(body)
         self.expected_success(200, resp.status)
         return rest_client.ResponseBody(resp, body)
+
+    def upload_volume(self, volume_id, **kwargs):
+        """Uploads a volume in Glance."""
+        post_body = json.dumps({'os-volume_upload_image': kwargs})
+        url = 'volumes/%s/action' % (volume_id)
+        resp, body = self.post(url, post_body)
+        body = json.loads(body)
+        self.expected_success(202, resp.status)
+        return rest_client.ResponseBody(resp, body)
+
+    def attach_volume(self, volume_id, **kwargs):
+        """Attaches a volume to a given instance on a given mountpoint.
+
+        For a full list of available parameters, please refer to the official
+        API reference:
+        https://developer.openstack.org/api-ref/block-storage/v3/index.html#attach-volume-to-a-server
+        """
+        post_body = json.dumps({'os-attach': kwargs})
+        url = 'volumes/%s/action' % (volume_id)
+        resp, body = self.post(url, post_body)
+        self.expected_success(202, resp.status)
+        return rest_client.ResponseBody(resp, body)
+
+    def set_bootable_volume(self, volume_id, **kwargs):
+        """Set a bootable flag for a volume - true or false.
+
+        For a full list of available parameters, please refer to the official
+        API reference:
+        https://developer.openstack.org/api-ref/block-storage/v3/index.html#update-a-volume-s-bootable-status
+        """
+        post_body = json.dumps({'os-set_bootable': kwargs})
+        url = 'volumes/%s/action' % (volume_id)
+        resp, body = self.post(url, post_body)
+        self.expected_success(200, resp.status)
+        return rest_client.ResponseBody(resp, body)
+
+    def detach_volume(self, volume_id):
+        """Detaches a volume from an instance."""
+        post_body = json.dumps({'os-detach': {}})
+        url = 'volumes/%s/action' % (volume_id)
+        resp, body = self.post(url, post_body)
+        self.expected_success(202, resp.status)
+        return rest_client.ResponseBody(resp, body)
+
+    def reserve_volume(self, volume_id):
+        """Reserves a volume."""
+        post_body = json.dumps({'os-reserve': {}})
+        url = 'volumes/%s/action' % (volume_id)
+        resp, body = self.post(url, post_body)
+        self.expected_success(202, resp.status)
+        return rest_client.ResponseBody(resp, body)
+
+    def unreserve_volume(self, volume_id):
+        """Restore a reserved volume ."""
+        post_body = json.dumps({'os-unreserve': {}})
+        url = 'volumes/%s/action' % (volume_id)
+        resp, body = self.post(url, post_body)
+        self.expected_success(202, resp.status)
+        return rest_client.ResponseBody(resp, body)
+
+    def is_resource_deleted(self, id):
+        """Check the specified resource is deleted or not.
+
+        :param id: A checked resource id
+        :raises lib_exc.DeleteErrorException: If the specified resource is on
+        the status the delete was failed.
+        """
+        try:
+            volume = self.show_volume(id)
+        except lib_exc.NotFound:
+            return True
+        if volume["volume"]["status"] == "error_deleting":
+            raise lib_exc.DeleteErrorException(resource_id=id)
+        return False
+
+    @property
+    def resource_type(self):
+        """Returns the primary type of resource this client works with."""
+        return 'volume'
+
+    def extend_volume(self, volume_id, **kwargs):
+        """Extend a volume.
+
+        For a full list of available parameters, please refer to the official
+        API reference:
+        https://developer.openstack.org/api-ref/block-storage/v3/index.html#extend-a-volume-size
+        """
+        post_body = json.dumps({'os-extend': kwargs})
+        url = 'volumes/%s/action' % (volume_id)
+        resp, body = self.post(url, post_body)
+        self.expected_success(202, resp.status)
+        return rest_client.ResponseBody(resp, body)
+
+    def reset_volume_status(self, volume_id, **kwargs):
+        """Reset the Specified Volume's Status.
+
+        For a full list of available parameters, please refer to the official
+        API reference:
+        https://developer.openstack.org/api-ref/block-storage/v3/index.html#reset-a-volume-s-statuses
+        """
+        post_body = json.dumps({'os-reset_status': kwargs})
+        resp, body = self.post('volumes/%s/action' % volume_id, post_body)
+        self.expected_success(202, resp.status)
+        return rest_client.ResponseBody(resp, body)
+
+    def update_volume_readonly(self, volume_id, **kwargs):
+        """Update the Specified Volume readonly."""
+        post_body = json.dumps({'os-update_readonly_flag': kwargs})
+        url = 'volumes/%s/action' % (volume_id)
+        resp, body = self.post(url, post_body)
+        self.expected_success(202, resp.status)
+        return rest_client.ResponseBody(resp, body)
+
+    def force_delete_volume(self, volume_id):
+        """Force Delete Volume."""
+        post_body = json.dumps({'os-force_delete': {}})
+        resp, body = self.post('volumes/%s/action' % volume_id, post_body)
+        self.expected_success(202, resp.status)
+        return rest_client.ResponseBody(resp, body)
+
+    def create_volume_metadata(self, volume_id, metadata):
+        """Create metadata for the volume.
+
+        For a full list of available parameters, please refer to the official
+        API reference:
+        https://developer.openstack.org/api-ref/block-storage/v3/index.html#create-metadata-for-volume
+        """
+        put_body = json.dumps({'metadata': metadata})
+        url = "volumes/%s/metadata" % volume_id
+        resp, body = self.post(url, put_body)
+        body = json.loads(body)
+        self.expected_success(200, resp.status)
+        return rest_client.ResponseBody(resp, body)
+
+    def show_volume_metadata(self, volume_id):
+        """Get metadata of the volume."""
+        url = "volumes/%s/metadata" % volume_id
+        resp, body = self.get(url)
+        body = json.loads(body)
+        self.expected_success(200, resp.status)
+        return rest_client.ResponseBody(resp, body)
+
+    def update_volume_metadata(self, volume_id, metadata):
+        """Update metadata for the volume.
+
+        For a full list of available parameters, please refer to the official
+        API reference:
+        https://developer.openstack.org/api-ref/block-storage/v3/index.html#update-a-volume-s-metadata
+        """
+        put_body = json.dumps({'metadata': metadata})
+        url = "volumes/%s/metadata" % volume_id
+        resp, body = self.put(url, put_body)
+        body = json.loads(body)
+        self.expected_success(200, resp.status)
+        return rest_client.ResponseBody(resp, body)
+
+    def show_volume_metadata_item(self, volume_id, id):
+        """Show metadata item for the volume."""
+        url = "volumes/%s/metadata/%s" % (volume_id, id)
+        resp, body = self.get(url)
+        body = json.loads(body)
+        self.expected_success(200, resp.status)
+        return rest_client.ResponseBody(resp, body)
+
+    def update_volume_metadata_item(self, volume_id, id, meta_item):
+        """Update metadata item for the volume."""
+        put_body = json.dumps({'meta': meta_item})
+        url = "volumes/%s/metadata/%s" % (volume_id, id)
+        resp, body = self.put(url, put_body)
+        body = json.loads(body)
+        self.expected_success(200, resp.status)
+        return rest_client.ResponseBody(resp, body)
+
+    def delete_volume_metadata_item(self, volume_id, id):
+        """Delete metadata item for the volume."""
+        url = "volumes/%s/metadata/%s" % (volume_id, id)
+        resp, body = self.delete(url)
+        self.expected_success(200, resp.status)
+        return rest_client.ResponseBody(resp, body)
+
+    def retype_volume(self, volume_id, **kwargs):
+        """Updates volume with new volume type.
+
+        For a full list of available parameters, please refer to the official
+        API reference:
+        https://developer.openstack.org/api-ref/block-storage/v3/index.html#retype-a-volume
+        """
+        post_body = json.dumps({'os-retype': kwargs})
+        resp, body = self.post('volumes/%s/action' % volume_id, post_body)
+        self.expected_success(202, resp.status)
+        return rest_client.ResponseBody(resp, body)
+
+    def force_detach_volume(self, volume_id, **kwargs):
+        """Force detach a volume.
+
+        For a full list of available parameters, please refer to the official
+        API reference:
+        https://developer.openstack.org/api-ref/block-storage/v3/index.html#force-delete-a-volume
+        """
+        post_body = json.dumps({'os-force_detach': kwargs})
+        url = 'volumes/%s/action' % volume_id
+        resp, body = self.post(url, post_body)
+        self.expected_success(202, resp.status)
+        return rest_client.ResponseBody(resp, body)
+
+    def update_volume_image_metadata(self, volume_id, **kwargs):
+        """Update image metadata for the volume.
+
+        For a full list of available parameters, please refer to the official
+        API reference:
+        https://developer.openstack.org/api-ref/block-storage/v3/index.html#set-image-metadata-for-a-volume
+        """
+        post_body = json.dumps({'os-set_image_metadata': {'metadata': kwargs}})
+        url = "volumes/%s/action" % (volume_id)
+        resp, body = self.post(url, post_body)
+        body = json.loads(body)
+        self.expected_success(200, resp.status)
+        return rest_client.ResponseBody(resp, body)
+
+    def delete_volume_image_metadata(self, volume_id, key_name):
+        """Delete image metadata item for the volume."""
+        post_body = json.dumps({'os-unset_image_metadata': {'key': key_name}})
+        url = "volumes/%s/action" % (volume_id)
+        resp, body = self.post(url, post_body)
+        self.expected_success(200, resp.status)
+        return rest_client.ResponseBody(resp, body)
+
+    def show_volume_image_metadata(self, volume_id):
+        """Show image metadata for the volume."""
+        post_body = json.dumps({'os-show_image_metadata': {}})
+        url = "volumes/%s/action" % volume_id
+        resp, body = self.post(url, post_body)
+        body = json.loads(body)
+        self.expected_success(200, resp.status)
+        return rest_client.ResponseBody(resp, body)
+
+    def unmanage_volume(self, volume_id):
+        """Unmanage volume.
+
+        For a full list of available parameters, please refer to the official
+        API reference:
+        https://developer.openstack.org/api-ref/block-storage/v3/index.html#unmanage-a-volume
+        """
+        post_body = json.dumps({'os-unmanage': {}})
+        resp, body = self.post('volumes/%s/action' % volume_id, post_body)
+        self.expected_success(202, resp.status)
+        return rest_client.ResponseBody(resp, body)
diff --git a/tempest/scenario/manager.py b/tempest/scenario/manager.py
index cf53b67..9db7f92 100644
--- a/tempest/scenario/manager.py
+++ b/tempest/scenario/manager.py
@@ -83,6 +83,7 @@
         if CONF.service_available.cinder:
             cls.volumes_client = cls.os_primary.volumes_client_latest
             cls.snapshots_client = cls.os_primary.snapshots_client_latest
+            cls.backups_client = cls.os_primary.backups_client_latest
 
     # ## Test functions library
     #
@@ -244,6 +245,37 @@
         volume = self.volumes_client.show_volume(volume['id'])['volume']
         return volume
 
+    def create_backup(self, volume_id, name=None, description=None,
+                      force=False, snapshot_id=None, incremental=False,
+                      container=None):
+
+        name = name or data_utils.rand_name(
+            self.__class__.__name__ + "-backup")
+        kwargs = {'name': name,
+                  'description': description,
+                  'force': force,
+                  'snapshot_id': snapshot_id,
+                  'incremental': incremental,
+                  'container': container}
+        backup = self.backups_client.create_backup(volume_id=volume_id,
+                                                   **kwargs)['backup']
+        self.addCleanup(self.backups_client.delete_backup, backup['id'])
+        waiters.wait_for_volume_resource_status(self.backups_client,
+                                                backup['id'], 'available')
+        return backup
+
+    def restore_backup(self, backup_id):
+        restore = self.backups_client.restore_backup(backup_id)['restore']
+        self.addCleanup(self.volumes_client.delete_volume,
+                        restore['volume_id'])
+        waiters.wait_for_volume_resource_status(self.backups_client,
+                                                backup_id, 'available')
+        waiters.wait_for_volume_resource_status(self.volumes_client,
+                                                restore['volume_id'],
+                                                'available')
+        self.assertEqual(backup_id, restore['backup_id'])
+        return restore
+
     def create_volume_snapshot(self, volume_id, name=None, description=None,
                                metadata=None, force=False):
         name = name or data_utils.rand_name(
@@ -266,10 +298,8 @@
     def create_volume_type(self, client=None, name=None, backend_name=None):
         if not client:
             client = self.os_admin.volume_types_v2_client
-        if not name:
-            class_name = self.__class__.__name__
-            name = data_utils.rand_name(class_name + '-volume-type')
-        randomized_name = data_utils.rand_name('scenario-type-' + name)
+        randomized_name = name or data_utils.rand_name(
+            'volume-type-' + self.__class__.__name__)
 
         LOG.debug("Creating a volume type: %s on backend %s",
                   randomized_name, backend_name)
@@ -413,7 +443,9 @@
                                        disk_format=img_disk_format,
                                        properties=img_properties)
         except IOError:
-            LOG.debug("A qcow2 image was not found. Try to get a uec image.")
+            LOG.warning(
+                "A(n) %s image was not found. Retrying with uec image.",
+                img_disk_format)
             kernel = self._image_create('scenario-aki', 'aki', aki_img_path)
             ramdisk = self._image_create('scenario-ari', 'ari', ari_img_path)
             properties = {'kernel_id': kernel, 'ramdisk_id': ramdisk}
@@ -511,7 +543,7 @@
                                                 volume['id'], 'available')
 
     def ping_ip_address(self, ip_address, should_succeed=True,
-                        ping_timeout=None, mtu=None):
+                        ping_timeout=None, mtu=None, server=None):
         timeout = ping_timeout or CONF.validation.ping_timeout
         cmd = ['ping', '-c1', '-w1']
 
@@ -545,12 +577,16 @@
                       'caller': caller, 'ip': ip_address, 'timeout': timeout,
                       'result': 'expected' if result else 'unexpected'
                   })
+        if server:
+            self._log_console_output([server])
         return result
 
     def check_vm_connectivity(self, ip_address,
                               username=None,
                               private_key=None,
                               should_connect=True,
+                              extra_msg="",
+                              server=None,
                               mtu=None):
         """Check server connectivity
 
@@ -560,43 +596,36 @@
         :param should_connect: True/False indicates positive/negative test
             positive - attempt ping and ssh
             negative - attempt ping and fail if succeed
+        :param extra_msg: Message to help with debugging if ``ping_ip_address``
+            fails
+        :param server: The server whose console to log for debugging
         :param mtu: network MTU to use for connectivity validation
 
         :raises: AssertError if the result of the connectivity check does
             not match the value of the should_connect param
         """
+        LOG.debug('checking network connections to IP %s with user: %s',
+                  ip_address, username)
         if should_connect:
             msg = "Timed out waiting for %s to become reachable" % ip_address
         else:
             msg = "ip address %s is reachable" % ip_address
+        if extra_msg:
+            msg = "%s\n%s" % (extra_msg, msg)
         self.assertTrue(self.ping_ip_address(ip_address,
                                              should_succeed=should_connect,
-                                             mtu=mtu),
+                                             mtu=mtu, server=server),
                         msg=msg)
         if should_connect:
             # no need to check ssh for negative connectivity
-            self.get_remote_client(ip_address, username, private_key)
-
-    def check_public_network_connectivity(self, ip_address, username,
-                                          private_key, should_connect=True,
-                                          msg=None, servers=None, mtu=None):
-        # The target login is assumed to have been configured for
-        # key-based authentication by cloud-init.
-        LOG.debug('checking network connections to IP %s with user: %s',
-                  ip_address, username)
-        try:
-            self.check_vm_connectivity(ip_address,
-                                       username,
-                                       private_key,
-                                       should_connect=should_connect,
-                                       mtu=mtu)
-        except Exception:
-            ex_msg = 'Public network connectivity check failed'
-            if msg:
-                ex_msg += ": " + msg
-            LOG.exception(ex_msg)
-            self._log_console_output(servers)
-            raise
+            try:
+                self.get_remote_client(ip_address, username, private_key,
+                                       server=server)
+            except Exception:
+                if not extra_msg:
+                    extra_msg = 'Failed to ssh to %s' % ip_address
+                LOG.exception(extra_msg)
+                raise
 
     def create_floating_ip(self, thing, pool_name=None):
         """Create a floating IP and associates to a server on Nova"""
@@ -777,8 +806,13 @@
         return subnet
 
     def _get_server_port_id_and_ip4(self, server, ip_addr=None):
-        ports = self.os_admin.ports_client.list_ports(
-            device_id=server['id'], fixed_ip=ip_addr)['ports']
+        if ip_addr:
+            ports = self.os_admin.ports_client.list_ports(
+                device_id=server['id'],
+                fixed_ips='ip_address=%s' % ip_addr)['ports']
+        else:
+            ports = self.os_admin.ports_client.list_ports(
+                device_id=server['id'])['ports']
         # A port can have more than one IP address in some cases.
         # If the network is dual-stack (IPv4 + IPv6), this port is associated
         # with 2 subnets
diff --git a/tempest/scenario/test_encrypted_cinder_volumes.py b/tempest/scenario/test_encrypted_cinder_volumes.py
index b5220e9..8c210d5 100644
--- a/tempest/scenario/test_encrypted_cinder_volumes.py
+++ b/tempest/scenario/test_encrypted_cinder_volumes.py
@@ -57,8 +57,7 @@
     @utils.services('compute', 'volume', 'image')
     def test_encrypted_cinder_volumes_luks(self):
         server = self.launch_instance()
-        volume = self.create_encrypted_volume('nova.volume.encryptors.'
-                                              'luks.LuksEncryptor',
+        volume = self.create_encrypted_volume('luks',
                                               volume_type='luks')
         self.attach_detach_volume(server, volume)
 
@@ -67,7 +66,6 @@
     @utils.services('compute', 'volume', 'image')
     def test_encrypted_cinder_volumes_cryptsetup(self):
         server = self.launch_instance()
-        volume = self.create_encrypted_volume('nova.volume.encryptors.'
-                                              'cryptsetup.CryptsetupEncryptor',
+        volume = self.create_encrypted_volume('plain',
                                               volume_type='cryptsetup')
         self.attach_detach_volume(server, volume)
diff --git a/tempest/scenario/test_network_advanced_server_ops.py b/tempest/scenario/test_network_advanced_server_ops.py
index 87ce951..b0e4669 100644
--- a/tempest/scenario/test_network_advanced_server_ops.py
+++ b/tempest/scenario/test_network_advanced_server_ops.py
@@ -90,9 +90,10 @@
         floating_ip_addr = floating_ip['floating_ip_address']
         # Check FloatingIP status before checking the connectivity
         self.check_floating_ip_status(floating_ip, 'ACTIVE')
-        self.check_public_network_connectivity(floating_ip_addr, username,
-                                               private_key, should_connect,
-                                               servers=[server])
+        self.check_vm_connectivity(floating_ip_addr, username,
+                                   private_key, should_connect,
+                                   'Public network connectivity check failed',
+                                   server)
 
     def _wait_server_status_and_check_network_connectivity(self, server,
                                                            keypair,
diff --git a/tempest/scenario/test_network_basic_ops.py b/tempest/scenario/test_network_basic_ops.py
index bcd4ddb..c1132cf 100644
--- a/tempest/scenario/test_network_basic_ops.py
+++ b/tempest/scenario/test_network_basic_ops.py
@@ -175,7 +175,7 @@
     def _get_server_key(self, server):
         return self.keypairs[server['key_name']]['private_key']
 
-    def check_public_network_connectivity(
+    def _check_public_network_connectivity(
             self, should_connect=True, msg=None,
             should_check_floating_ip_status=True, mtu=None):
         """Verifies connectivty to a VM via public network and floating IP
@@ -199,13 +199,18 @@
         if should_connect:
             private_key = self._get_server_key(server)
             floatingip_status = 'ACTIVE'
+
         # Check FloatingIP Status before initiating a connection
         if should_check_floating_ip_status:
             self.check_floating_ip_status(floating_ip, floatingip_status)
-        # call the common method in the parent class
-        super(TestNetworkBasicOps, self).check_public_network_connectivity(
-            ip_address, ssh_login, private_key, should_connect, msg,
-            self.servers, mtu=mtu)
+
+        message = 'Public network connectivity check failed'
+        if msg:
+            message += '. Reason: %s' % msg
+
+        self.check_vm_connectivity(
+            ip_address, ssh_login, private_key, should_connect,
+            message, server, mtu=mtu)
 
     def _disassociate_floating_ips(self):
         floating_ip, _ = self.floating_ip_tuple
@@ -404,17 +409,17 @@
 
         """
         self._setup_network_and_servers()
-        self.check_public_network_connectivity(should_connect=True)
+        self._check_public_network_connectivity(should_connect=True)
         self._check_network_internal_connectivity(network=self.network)
         self._check_network_external_connectivity()
         self._disassociate_floating_ips()
-        self.check_public_network_connectivity(should_connect=False,
-                                               msg="after disassociate "
-                                                   "floating ip")
+        self._check_public_network_connectivity(should_connect=False,
+                                                msg="after disassociate "
+                                                    "floating ip")
         self._reassociate_floating_ips()
-        self.check_public_network_connectivity(should_connect=True,
-                                               msg="after re-associate "
-                                                   "floating ip")
+        self._check_public_network_connectivity(should_connect=True,
+                                                msg="after re-associate "
+                                                    "floating ip")
 
     @decorators.idempotent_id('b158ea55-472e-4086-8fa9-c64ac0c6c1d0')
     @testtools.skipUnless(utils.is_extension_enabled('net-mtu', 'network'),
@@ -425,17 +430,16 @@
         """Validate that network MTU sized frames fit through."""
         self._setup_network_and_servers()
         # first check that connectivity works in general for the instance
-        self.check_public_network_connectivity(should_connect=True)
+        self._check_public_network_connectivity(should_connect=True)
         # now that we checked general connectivity, test that full size frames
         # can also pass between nodes
-        self.check_public_network_connectivity(
+        self._check_public_network_connectivity(
             should_connect=True, mtu=self.network['mtu'])
 
     @decorators.idempotent_id('1546850e-fbaa-42f5-8b5f-03d8a6a95f15')
     @testtools.skipIf(CONF.network.shared_physical_network,
                       'Connectivity can only be tested when in a '
                       'multitenant network environment')
-    @decorators.skip_because(bug="1610994")
     @decorators.attr(type='slow')
     @utils.services('compute', 'network')
     def test_connectivity_between_vms_on_different_networks(self):
@@ -468,7 +472,7 @@
 
         """
         self._setup_network_and_servers()
-        self.check_public_network_connectivity(should_connect=True)
+        self._check_public_network_connectivity(should_connect=True)
         self._check_network_internal_connectivity(network=self.network)
         self._check_network_external_connectivity()
         self._create_new_network(create_gateway=True)
@@ -503,7 +507,7 @@
 
         """
         self._setup_network_and_servers()
-        self.check_public_network_connectivity(should_connect=True)
+        self._check_public_network_connectivity(should_connect=True)
         self._create_new_network()
         self._hotplug_server()
         self._check_network_internal_connectivity(network=self.new_net)
@@ -525,19 +529,19 @@
                 admin_state_up attribute of router to True
         """
         self._setup_network_and_servers()
-        self.check_public_network_connectivity(
+        self._check_public_network_connectivity(
             should_connect=True, msg="before updating "
             "admin_state_up of router to False")
         self._update_router_admin_state(self.router, False)
         # TODO(alokmaurya): Remove should_check_floating_ip_status=False check
         # once bug 1396310 is fixed
 
-        self.check_public_network_connectivity(
+        self._check_public_network_connectivity(
             should_connect=False, msg="after updating "
             "admin_state_up of router to False",
             should_check_floating_ip_status=False)
         self._update_router_admin_state(self.router, True)
-        self.check_public_network_connectivity(
+        self._check_public_network_connectivity(
             should_connect=True, msg="after updating "
             "admin_state_up of router to True")
 
@@ -582,7 +586,7 @@
         renew_timeout = CONF.network.build_timeout
 
         self._setup_network_and_servers(dns_nameservers=[initial_dns_server])
-        self.check_public_network_connectivity(should_connect=True)
+        self._check_public_network_connectivity(should_connect=True)
 
         floating_ip, server = self.floating_ip_tuple
         ip_address = floating_ip['floating_ip_address']
@@ -657,20 +661,20 @@
                                             private_key=private_key,
                                             server=server2)
 
-        self.check_public_network_connectivity(
+        self._check_public_network_connectivity(
             should_connect=True, msg="before updating "
             "admin_state_up of instance port to False")
         self.check_remote_connectivity(ssh_client, dest=server_pip,
                                        should_succeed=True)
         self.ports_client.update_port(port_id, admin_state_up=False)
-        self.check_public_network_connectivity(
+        self._check_public_network_connectivity(
             should_connect=False, msg="after updating "
             "admin_state_up of instance port to False",
             should_check_floating_ip_status=False)
         self.check_remote_connectivity(ssh_client, dest=server_pip,
                                        should_succeed=False)
         self.ports_client.update_port(port_id, admin_state_up=True)
-        self.check_public_network_connectivity(
+        self._check_public_network_connectivity(
             should_connect=True, msg="after updating "
             "admin_state_up of instance port to True")
         self.check_remote_connectivity(ssh_client, dest=server_pip,
@@ -767,7 +771,7 @@
             msg = "Rescheduling test does not apply to distributed routers."
             raise self.skipException(msg)
 
-        self.check_public_network_connectivity(should_connect=True)
+        self._check_public_network_connectivity(should_connect=True)
 
         # remove resource from agents
         hosting_agents = set(a["id"] for a in
@@ -784,7 +788,7 @@
                              'unscheduling router failed')
 
         # verify resource is un-functional
-        self.check_public_network_connectivity(
+        self._check_public_network_connectivity(
             should_connect=False,
             msg='after router unscheduling',
         )
@@ -801,7 +805,7 @@
             "target agent")
 
         # verify resource is functional
-        self.check_public_network_connectivity(
+        self._check_public_network_connectivity(
             should_connect=True,
             msg='After router rescheduling')
 
@@ -835,7 +839,7 @@
 
         # Create server
         self._setup_network_and_servers()
-        self.check_public_network_connectivity(should_connect=True)
+        self._check_public_network_connectivity(should_connect=True)
         self._create_new_network()
         self._hotplug_server()
         fip, server = self.floating_ip_tuple
diff --git a/tempest/scenario/test_server_advanced_ops.py b/tempest/scenario/test_server_advanced_ops.py
index 89b9fdd..8aa729b 100644
--- a/tempest/scenario/test_server_advanced_ops.py
+++ b/tempest/scenario/test_server_advanced_ops.py
@@ -32,7 +32,6 @@
     """The test suite for server advanced operations
 
     This test case stresses some advanced server instance operations:
-     * Resizing a volume-backed instance
      * Sequence suspend resume
     """
 
diff --git a/tempest/scenario/test_volume_backup_restore.py b/tempest/scenario/test_volume_backup_restore.py
new file mode 100644
index 0000000..8a8c54e
--- /dev/null
+++ b/tempest/scenario/test_volume_backup_restore.py
@@ -0,0 +1,94 @@
+# Copyright 2018 Red Hat, Inc.
+# All Rights Reserved.
+#
+#    Licensed under the Apache License, Version 2.0 (the "License"); you may
+#    not use this file except in compliance with the License. You may obtain
+#    a copy of the License at
+#
+#         http://www.apache.org/licenses/LICENSE-2.0
+#
+#    Unless required by applicable law or agreed to in writing, software
+#    distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+#    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+#    License for the specific language governing permissions and limitations
+#    under the License.
+
+from tempest.common import utils
+from tempest.common import waiters
+from tempest import config
+from tempest.lib import decorators
+from tempest.scenario import manager
+
+CONF = config.CONF
+
+
+class TestVolumeBackupRestore(manager.ScenarioTest):
+    """Test cinder backup and restore
+
+    This testcase verifies content preservation after backup and restore
+    operations by booting a server from a restored backup and check the
+    connectivity to it.
+
+    The following is the scenario outline:
+    1. Create volume from image.
+    2. Create a backup for the volume.
+    3. Restore the backup.
+    4. Boot a server from the restored backup.
+    5. Create a floating ip.
+    6. Check server connectivity.
+    """
+
+    @classmethod
+    def skip_checks(cls):
+        super(TestVolumeBackupRestore, cls).skip_checks()
+        if not CONF.volume_feature_enabled.backup:
+            raise cls.skipException('Backup is not enable.')
+
+    @decorators.idempotent_id('2ce5e55c-4085-43c1-98c6-582525334ad7')
+    @decorators.attr(type='slow')
+    @utils.services('compute', 'volume', 'image')
+    def test_volume_backup_restore(self):
+        # Create volume from image
+        img_uuid = CONF.compute.image_ref
+        volume = self.create_volume(imageRef=img_uuid)
+        volume_details = self.volumes_client.show_volume(
+            volume['id'])['volume']
+        self.assertEqual('true', volume_details['bootable'])
+
+        # Create a backup
+        backup = self.create_backup(volume_id=volume['id'])
+        waiters.wait_for_volume_resource_status(self.volumes_client,
+                                                volume['id'], 'available')
+
+        # Restore the backup
+        restored_volume_id = self.restore_backup(backup['id'])['volume_id']
+
+        # Verify the restored backup volume is bootable
+        restored_volume_info = self.volumes_client.show_volume(
+            restored_volume_id)['volume']
+        self.assertEqual('true', restored_volume_info['bootable'])
+
+        # Create keypair and security group
+        keypair = self.create_keypair()
+        security_group = self._create_security_group()
+
+        # Boot a server from the restored backup
+        bd_map_v2 = [{
+            'uuid': restored_volume_id,
+            'source_type': 'volume',
+            'destination_type': 'volume',
+            'boot_index': 0}]
+        server = self.create_server(image_id='',
+                                    block_device_mapping_v2=bd_map_v2,
+                                    key_name=keypair['name'],
+                                    security_groups=[
+                                        {'name': security_group['name']}])
+
+        # Create a floating ip
+        floating_ip = self.create_floating_ip(server)
+
+        # Check server connectivity
+        self.check_vm_connectivity(floating_ip['ip'],
+                                   username=CONF.validation.image_ssh_user,
+                                   private_key=keypair['private_key'],
+                                   should_connect=True)
diff --git a/tempest/scenario/test_volume_boot_pattern.py b/tempest/scenario/test_volume_boot_pattern.py
index 1fc57e7..1564f25 100644
--- a/tempest/scenario/test_volume_boot_pattern.py
+++ b/tempest/scenario/test_volume_boot_pattern.py
@@ -68,6 +68,9 @@
         waiters.wait_for_server_termination(self.servers_client, server['id'])
 
     @decorators.idempotent_id('557cd2c2-4eb8-4dce-98be-f86765ff311b')
+    # Note: This test is being skipped based on 'public_network_id'.
+    # It is being used in create_floating_ip() method which gets called
+    # from get_server_ip() method
     @testtools.skipUnless(CONF.network.public_network_id,
                           'The public_network_id option must be specified.')
     @testtools.skipUnless(CONF.volume_feature_enabled.snapshot,
@@ -236,16 +239,11 @@
 
         # Delete the second server which should also delete the second volume
         # created from the volume snapshot.
-        # TODO(mriedem): Currently, the compute service fails to delete the
-        # volume it created because the volume still has the snapshot
-        # associated with it, and the cleanups for the volume snapshot which
-        # were added in create_server_snapshot above, don't run until after
-        # this is called. So we need to delete the volume snapshot and wait for
-        # it to be gone here first before deleting the server, and then we can
-        # also assert that the underlying volume is deleted when the server is
-        # deleted.
         self._delete_server(instance)
 
+        # Assert that the underlying volume is gone.
+        self.volumes_client.wait_for_resource_deletion(created_volume['id'])
+
     @decorators.idempotent_id('cb78919a-e553-4bab-b73b-10cf4d2eb125')
     @testtools.skipUnless(CONF.compute_feature_enabled.attach_encrypted_volume,
                           'Encrypted volume attach is not supported')
diff --git a/tempest/tests/cmd/test_workspace.py b/tempest/tests/cmd/test_workspace.py
index a1c8c53..3ed8a10 100644
--- a/tempest/tests/cmd/test_workspace.py
+++ b/tempest/tests/cmd/test_workspace.py
@@ -17,6 +17,11 @@
 import subprocess
 import tempfile
 
+from mock import patch
+try:
+    from StringIO import StringIO
+except ImportError:
+    from io import StringIO
 from tempest.cmd import workspace
 from tempest.lib.common.utils import data_utils
 from tempest.tests import base
@@ -140,3 +145,42 @@
         self.addCleanup(shutil.rmtree, path, ignore_errors=True)
         self.workspace_manager.register_new_workspace(name, path)
         self.assertIsNotNone(self.workspace_manager.get_workspace(name))
+
+    def test_workspace_name_not_exists(self):
+        nonexistent_name = data_utils.rand_uuid()
+        with patch('sys.stdout', new_callable=StringIO) as mock_stdout:
+            ex = self.assertRaises(SystemExit,
+                                   self.workspace_manager._name_exists,
+                                   nonexistent_name)
+        self.assertEqual(1, ex.code)
+        self.assertEqual(mock_stdout.getvalue(),
+                         "A workspace was not found with name: %s\n" %
+                         nonexistent_name)
+
+    def test_workspace_name_already_exists(self):
+        duplicate_name = self.name
+        with patch('sys.stdout', new_callable=StringIO) as mock_stdout:
+            ex = self.assertRaises(SystemExit,
+                                   self.workspace_manager.
+                                   _workspace_name_exists,
+                                   duplicate_name)
+        self.assertEqual(1, ex.code)
+        self.assertEqual(mock_stdout.getvalue(),
+                         "A workspace already exists with name: %s.\n"
+                         % duplicate_name)
+
+    def test_workspace_manager_path_not_exist(self):
+        fake_path = "fake_path"
+        with patch('sys.stdout', new_callable=StringIO) as mock_stdout:
+            ex = self.assertRaises(SystemExit,
+                                   self.workspace_manager._validate_path,
+                                   fake_path)
+        self.assertEqual(1, ex.code)
+        self.assertEqual(mock_stdout.getvalue(),
+                         "Path does not exist.\n")
+
+    def test_workspace_manager_list_workspaces(self):
+        listed = self.workspace_manager.list_workspaces()
+        self.assertEqual(1, len(listed))
+        self.assertIn(self.name, listed)
+        self.assertEqual(self.path, listed.get(self.name))
diff --git a/tempest/tests/common/test_waiters.py b/tempest/tests/common/test_waiters.py
index bc197b5..938d226 100644
--- a/tempest/tests/common/test_waiters.py
+++ b/tempest/tests/common/test_waiters.py
@@ -72,3 +72,79 @@
         mock_show.assert_has_calls([mock.call(volume_id),
                                     mock.call(volume_id)])
         mock_sleep.assert_called_once_with(1)
+
+
+class TestInterfaceWaiters(base.TestCase):
+
+    build_timeout = 1.
+    build_interval = 1
+    port_down = {'interfaceAttachment': {'port_state': 'DOWN'}}
+    port_active = {'interfaceAttachment': {'port_state': 'ACTIVE'}}
+
+    def mock_client(self, **kwargs):
+        return mock.MagicMock(
+            build_timeout=self.build_timeout,
+            build_interval=self.build_interval,
+            **kwargs)
+
+    def test_wait_for_interface_status(self):
+        show_interface = mock.Mock(
+            side_effect=[self.port_down, self.port_active])
+        client = self.mock_client(show_interface=show_interface)
+        self.patch('time.time', return_value=0.)
+        sleep = self.patch('time.sleep')
+
+        result = waiters.wait_for_interface_status(
+            client, 'server_id', 'port_id', 'ACTIVE')
+
+        self.assertIs(self.port_active['interfaceAttachment'], result)
+        show_interface.assert_has_calls([mock.call('server_id', 'port_id'),
+                                         mock.call('server_id', 'port_id')])
+        sleep.assert_called_once_with(client.build_interval)
+
+    def test_wait_for_interface_status_timeout(self):
+        show_interface = mock.MagicMock(return_value=self.port_down)
+        client = self.mock_client(show_interface=show_interface)
+        self.patch('time.time', side_effect=[0., client.build_timeout + 1.])
+        sleep = self.patch('time.sleep')
+
+        self.assertRaises(lib_exc.TimeoutException,
+                          waiters.wait_for_interface_status,
+                          client, 'server_id', 'port_id', 'ACTIVE')
+
+        show_interface.assert_has_calls([mock.call('server_id', 'port_id'),
+                                         mock.call('server_id', 'port_id')])
+        sleep.assert_called_once_with(client.build_interval)
+
+    one_interface = {'interfaceAttachments': [{'port_id': 'port_one'}]}
+    two_interfaces = {'interfaceAttachments': [{'port_id': 'port_one'},
+                                               {'port_id': 'port_two'}]}
+
+    def test_wait_for_interface_detach(self):
+        list_interfaces = mock.MagicMock(
+            side_effect=[self.two_interfaces, self.one_interface])
+        client = self.mock_client(list_interfaces=list_interfaces)
+        self.patch('time.time', return_value=0.)
+        sleep = self.patch('time.sleep')
+
+        result = waiters.wait_for_interface_detach(
+            client, 'server_id', 'port_two')
+
+        self.assertIs(self.one_interface['interfaceAttachments'], result)
+        list_interfaces.assert_has_calls([mock.call('server_id'),
+                                          mock.call('server_id')])
+        sleep.assert_called_once_with(client.build_interval)
+
+    def test_wait_for_interface_detach_timeout(self):
+        list_interfaces = mock.MagicMock(return_value=self.one_interface)
+        client = self.mock_client(list_interfaces=list_interfaces)
+        self.patch('time.time', side_effect=[0., client.build_timeout + 1.])
+        sleep = self.patch('time.sleep')
+
+        self.assertRaises(lib_exc.TimeoutException,
+                          waiters.wait_for_interface_detach,
+                          client, 'server_id', 'port_one')
+
+        list_interfaces.assert_has_calls([mock.call('server_id'),
+                                          mock.call('server_id')])
+        sleep.assert_called_once_with(client.build_interval)
diff --git a/tempest/tests/common/utils/linux/test_remote_client.py b/tempest/tests/common/utils/linux/test_remote_client.py
index 739357b..1f0080f 100644
--- a/tempest/tests/common/utils/linux/test_remote_client.py
+++ b/tempest/tests/common/utils/linux/test_remote_client.py
@@ -77,7 +77,7 @@
 
     def test_write_to_console_special_chars(self):
         self._test_write_to_console_helper(
-            '\`',
+            r'\`',
             'sudo sh -c "echo \\"\\\\\\`\\" >/dev/console"')
         self.conn.write_to_console('$')
         self._assert_exec_called_with(
diff --git a/tempest/tests/fake_config.py b/tempest/tests/fake_config.py
index 4a2fff4..be54130 100644
--- a/tempest/tests/fake_config.py
+++ b/tempest/tests/fake_config.py
@@ -59,6 +59,7 @@
         self._set_attrs()
         self.lock_path = cfg.CONF.oslo_concurrency.lock_path
 
+
 fake_service1_group = cfg.OptGroup(name='fake-service1', title='Fake service1')
 
 FakeService1Group = [
diff --git a/tempest/tests/lib/common/test_http.py b/tempest/tests/lib/common/test_http.py
index a292209..02436e0 100644
--- a/tempest/tests/lib/common/test_http.py
+++ b/tempest/tests/lib/common/test_http.py
@@ -12,57 +12,158 @@
 #    License for the specific language governing permissions and limitations
 #    under the License.
 
+import urllib3
+
 from tempest.lib.common import http
 from tempest.tests import base
 
 
+CERT_NONE = 'CERT_NONE'
+CERT_REQUIRED = 'CERT_REQUIRED'
+CERT_LOCATION = '/etc/ssl/certs/ca-certificates.crt'
+PROXY_URL = 'http://myproxy:3128'
+REQUEST_URL = 'http://10.0.0.107:5000/v2.0'
+REQUEST_METHOD = 'GET'
+
+
 class TestClosingHttp(base.TestCase):
-    def setUp(self):
-        super(TestClosingHttp, self).setUp()
-        self.cert_none = "CERT_NONE"
-        self.cert_location = "/etc/ssl/certs/ca-certificates.crt"
 
-    def test_constructor_invalid_ca_certs_and_timeout(self):
-        connection = http.ClosingHttp(
-            disable_ssl_certificate_validation=False,
-            ca_certs=None,
-            timeout=None)
-        for attr in ('cert_reqs', 'ca_certs', 'timeout'):
-            self.assertNotIn(attr, connection.connection_pool_kw)
+    def closing_http(self, **kwargs):
+        return http.ClosingHttp(**kwargs)
 
-    def test_constructor_valid_ca_certs(self):
-        cert_required = 'CERT_REQUIRED'
-        connection = http.ClosingHttp(
-            disable_ssl_certificate_validation=False,
-            ca_certs=self.cert_location,
-            timeout=None)
-        self.assertEqual(cert_required,
+    def test_closing_http(self):
+        connection = self.closing_http()
+
+        self.assertNotIn('cert_reqs', connection.connection_pool_kw)
+        self.assertNotIn('ca_certs', connection.connection_pool_kw)
+        self.assertNotIn('timeout', connection.connection_pool_kw)
+
+    def test_closing_http_with_ca_certs(self):
+        connection = self.closing_http(ca_certs=CERT_LOCATION)
+
+        self.assertEqual(CERT_REQUIRED,
                          connection.connection_pool_kw['cert_reqs'])
-        self.assertEqual(self.cert_location,
+        self.assertEqual(CERT_LOCATION,
                          connection.connection_pool_kw['ca_certs'])
-        self.assertNotIn('timeout',
+
+    def test_closing_http_with_dscv(self):
+        connection = self.closing_http(
+            disable_ssl_certificate_validation=True)
+
+        self.assertEqual(CERT_NONE,
+                         connection.connection_pool_kw['cert_reqs'])
+        self.assertNotIn('ca_certs',
                          connection.connection_pool_kw)
 
-    def test_constructor_ssl_cert_validation_disabled(self):
-        connection = http.ClosingHttp(
+    def test_closing_http_with_ca_certs_and_dscv(self):
+        connection = self.closing_http(
             disable_ssl_certificate_validation=True,
-            ca_certs=None,
-            timeout=30)
-        self.assertEqual(self.cert_none,
+            ca_certs=CERT_LOCATION)
+
+        self.assertEqual(CERT_NONE,
                          connection.connection_pool_kw['cert_reqs'])
-        self.assertEqual(30,
+        self.assertNotIn('ca_certs',
+                         connection.connection_pool_kw)
+
+    def test_closing_http_with_timeout(self):
+        timeout = 30
+        connection = self.closing_http(timeout=timeout)
+        self.assertEqual(timeout,
                          connection.connection_pool_kw['timeout'])
-        self.assertNotIn('ca_certs',
-                         connection.connection_pool_kw)
 
-    def test_constructor_ssl_cert_validation_disabled_and_ca_certs(self):
-        connection = http.ClosingHttp(
-            disable_ssl_certificate_validation=True,
-            ca_certs=self.cert_location,
-            timeout=None)
-        self.assertNotIn('timeout',
-                         connection.connection_pool_kw)
-        self.assertEqual(self.cert_none,
-                         connection.connection_pool_kw['cert_reqs'])
-        self.assertNotIn('ca_certs',
-                         connection.connection_pool_kw)
+    def test_request(self):
+        # Given
+        connection = self.closing_http()
+        http_response = urllib3.HTTPResponse()
+        request = self.patch('urllib3.PoolManager.request',
+                             return_value=http_response)
+        retry = self.patch('urllib3.util.Retry')
+
+        # When
+        response, data = connection.request(
+            method=REQUEST_METHOD,
+            url=REQUEST_URL)
+
+        # Then
+        request.assert_called_once_with(
+            REQUEST_METHOD,
+            REQUEST_URL,
+            headers={'connection': 'close'},
+            retries=retry(raise_on_redirect=False, redirect=5))
+        self.assertEqual(
+            {'content-location': REQUEST_URL,
+             'status': str(http_response.status)},
+            response)
+        self.assertEqual(http_response.status, response.status)
+        self.assertEqual(http_response.reason, response.reason)
+        self.assertEqual(http_response.version, response.version)
+        self.assertEqual(http_response.data, data)
+
+    def test_request_with_fields(self):
+        # Given
+        connection = self.closing_http()
+        http_response = urllib3.HTTPResponse()
+        request = self.patch('urllib3.PoolManager.request',
+                             return_value=http_response)
+        retry = self.patch('urllib3.util.Retry')
+        fields = object()
+
+        # When
+        connection.request(
+            method=REQUEST_METHOD,
+            url=REQUEST_URL,
+            fields=fields)
+
+        # Then
+        request.assert_called_once_with(
+            REQUEST_METHOD,
+            REQUEST_URL,
+            fields=fields,
+            headers=dict(connection='close'),
+            retries=retry(raise_on_redirect=False, redirect=5))
+
+    def test_request_with_headers(self):
+        # Given
+        connection = self.closing_http()
+        headers = {'Xtra Key': 'Xtra Value'}
+        http_response = urllib3.HTTPResponse(headers=headers)
+        request = self.patch('urllib3.PoolManager.request',
+                             return_value=http_response)
+        retry = self.patch('urllib3.util.Retry')
+
+        # When
+        response, _ = connection.request(
+            method=REQUEST_METHOD,
+            url=REQUEST_URL,
+            headers=headers)
+
+        # Then
+        request.assert_called_once_with(
+            REQUEST_METHOD,
+            REQUEST_URL,
+            headers=dict(headers, connection='close'),
+            retries=retry(raise_on_redirect=False, redirect=5))
+        self.assertEqual(
+            {'content-location': REQUEST_URL,
+             'status': str(http_response.status),
+             'xtra key': 'Xtra Value'},
+            response)
+
+
+class TestClosingProxyHttp(TestClosingHttp):
+
+    def closing_http(self, proxy_url=PROXY_URL, **kwargs):
+        connection = http.ClosingProxyHttp(proxy_url=proxy_url, **kwargs)
+        self.assertHasProxy(connection, proxy_url)
+        return connection
+
+    def test_class_without_proxy_url(self):
+        self.assertRaises(ValueError, http.ClosingProxyHttp, None)
+
+    def assertHasProxy(self, connection, proxy_url):
+        self.assertIsInstance(connection, http.ClosingProxyHttp)
+        proxy = connection.proxy
+        self.assertEqual(proxy_url,
+                         '%s://%s:%i' % (proxy.scheme,
+                                         proxy.host,
+                                         proxy.port))
diff --git a/tempest/tests/lib/common/utils/test_data_utils.py b/tempest/tests/lib/common/utils/test_data_utils.py
index b8385b2..a0267d0 100644
--- a/tempest/tests/lib/common/utils/test_data_utils.py
+++ b/tempest/tests/lib/common/utils/test_data_utils.py
@@ -88,7 +88,7 @@
     def test_rand_url(self):
         actual = data_utils.rand_url()
         self.assertIsInstance(actual, str)
-        self.assertRegex(actual, "^https://url-[0-9]*\.com$")
+        self.assertRegex(actual, r"^https://url-[0-9]*\.com$")
         actual2 = data_utils.rand_url()
         self.assertNotEqual(actual, actual2)
 
diff --git a/tempest/tests/lib/common/utils/test_test_utils.py b/tempest/tests/lib/common/utils/test_test_utils.py
index f638ba6..865767b 100644
--- a/tempest/tests/lib/common/utils/test_test_utils.py
+++ b/tempest/tests/lib/common/utils/test_test_utils.py
@@ -12,12 +12,15 @@
 #    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
 #    License for the specific language governing permissions and limitations
 #    under the License.
+
+import time
+
 import mock
 
+from tempest.lib.common import thread
 from tempest.lib.common.utils import test_utils
 from tempest.lib import exceptions
 from tempest.tests import base
-from tempest.tests import utils
 
 
 class TestTestUtils(base.TestCase):
@@ -78,47 +81,126 @@
             42, test_utils.call_and_ignore_notfound_exc(m, *args, **kwargs))
         m.assert_called_once_with(*args, **kwargs)
 
-    @mock.patch('time.sleep')
-    @mock.patch('time.time')
-    def test_call_until_true_when_f_never_returns_true(self, m_time, m_sleep):
-        def set_value(bool_value):
-            return bool_value
-        timeout = 42  # The value doesn't matter as we mock time.time()
-        sleep = 60  # The value doesn't matter as we mock time.sleep()
-        m_time.side_effect = utils.generate_timeout_series(timeout)
-        self.assertEqual(
-            False, test_utils.call_until_true(set_value, timeout, sleep, False)
-        )
-        m_sleep.call_args_list = [mock.call(sleep)] * 2
-        m_time.call_args_list = [mock.call()] * 2
 
-    @mock.patch('time.sleep')
-    @mock.patch('time.time')
-    def test_call_until_true_when_f_returns_true(self, m_time, m_sleep):
-        def set_value(bool_value=False):
-            return bool_value
-        timeout = 42  # The value doesn't matter as we mock time.time()
-        sleep = 60  # The value doesn't matter as we mock time.sleep()
-        m_time.return_value = 0
-        self.assertEqual(
-            True, test_utils.call_until_true(set_value, timeout, sleep,
-                                             bool_value=True)
-        )
-        self.assertEqual(0, m_sleep.call_count)
-        # when logging cost time we need to acquire current time.
-        self.assertEqual(2, m_time.call_count)
+class TestCallUntilTrue(base.TestCase):
 
-    @mock.patch('time.sleep')
-    @mock.patch('time.time')
-    def test_call_until_true_when_f_returns_true_no_param(
-            self, m_time, m_sleep):
-        def set_value(bool_value=False):
-            return bool_value
-        timeout = 42  # The value doesn't matter as we mock time.time()
-        sleep = 60  # The value doesn't matter as we mock time.sleep()
-        m_time.side_effect = utils.generate_timeout_series(timeout)
-        self.assertEqual(
-            False, test_utils.call_until_true(set_value, timeout, sleep)
-        )
-        m_sleep.call_args_list = [mock.call(sleep)] * 2
-        m_time.call_args_list = [mock.call()] * 2
+    def test_call_until_true_when_true_at_first_call(self):
+        """func returns True at first call
+
+        """
+        self._test_call_until_true(return_values=[True],
+                                   duration=30.,
+                                   time_sequence=[10., 60.])
+
+    def test_call_until_true_when_true_before_timeout(self):
+        """func returns false at first call, then True before timeout
+
+        """
+        self._test_call_until_true(return_values=[False, True],
+                                   duration=30.,
+                                   time_sequence=[10., 39., 41.])
+
+    def test_call_until_true_when_never_true_before_timeout(self):
+        """func returns false, then false, just before timeout
+
+        """
+        self._test_call_until_true(return_values=[False, False],
+                                   duration=30.,
+                                   time_sequence=[10., 39., 41.])
+
+    def test_call_until_true_with_params(self):
+        """func is called using given parameters
+
+        """
+        self._test_call_until_true(return_values=[False, True],
+                                   duration=30.,
+                                   time_sequence=[10., 30., 60.],
+                                   args=(1, 2),
+                                   kwargs=dict(foo='bar', bar='foo'))
+
+    def _test_call_until_true(self, return_values, duration, time_sequence,
+                              args=None, kwargs=None):
+        """Test call_until_true function
+
+        :param return_values: list of booleans values to be returned
+        each time given function is called. If any of these values
+        is not consumed by calling the function the test fails.
+        The list must contain a sequence of False items terminated
+        by a single True or False
+        :param duration: parameter passed to call_until_true function
+        (a floating point value).
+        :param time_sequence: sequence of time values returned by
+        mocked time.time function used to trigger call_until_true
+        behavior when handling timeout condition. The sequence must
+        contain the exact number of values expected to be consumed by
+        each time call_until_true calls time.time function.
+        :param args: sequence of positional arguments to be passed
+        to call_until_true function.
+        :param kwargs: sequence of named arguments to be passed
+        to call_until_true function.
+        """
+
+        # all values except the last are False
+        self.assertEqual([False] * len(return_values[:-1]), return_values[:-1])
+        # last value can be True or False
+        self.assertIn(return_values[-1], [True, False])
+
+        # GIVEN
+        func = mock.Mock(side_effect=return_values)
+        sleep = 10.  # this value has no effect as time.sleep is being mocked
+        sleep_func = self.patch('time.sleep')
+        time_func = self._patch_time(time_sequence)
+        args = args or tuple()
+        kwargs = kwargs or dict()
+
+        # WHEN
+        result = test_utils.call_until_true(func, duration, sleep,
+                                            *args, **kwargs)
+        # THEN
+
+        # It must return last returned value
+        self.assertIs(return_values[-1], result)
+
+        self._test_func_calls(func, return_values, *args, **kwargs)
+        self._test_sleep_calls(sleep_func, return_values, sleep)
+        # The number of times time.time is called is not relevant as a
+        # requirement of call_until_true. What is instead relevant is that
+        # call_until_true use a mocked function to make the test reliable
+        # and the test actually provide the right sequence of numbers to
+        # reproduce the behavior has to be tested
+        self._assert_called_n_times(time_func, len(time_sequence))
+
+    def _patch_time(self, time_sequence):
+        # Iterator over time sequence
+        time_iterator = iter(time_sequence)
+        # Preserve original time.time() behavior for other threads
+        original_time = time.time
+        thread_id = thread.get_ident()
+
+        def mocked_time():
+            if thread.get_ident() == thread_id:
+                # Test thread => return time sequence values
+                return next(time_iterator)
+            else:
+                # Other threads => call original time function
+                return original_time()
+
+        return self.patch('time.time', side_effect=mocked_time)
+
+    def _test_func_calls(self, func, return_values, *args, **kwargs):
+        self._assert_called_n_times(func, len(return_values), *args, **kwargs)
+
+    def _test_sleep_calls(self, sleep_func, return_values, sleep):
+        # count first consecutive False
+        expected_count = 0
+        for value in return_values:
+            if value:
+                break
+            expected_count += 1
+        self._assert_called_n_times(sleep_func, expected_count, sleep)
+
+    def _assert_called_n_times(self, mock_func, expected_count, *args,
+                               **kwargs):
+        calls = [mock.call(*args, **kwargs)] * expected_count
+        self.assertEqual(expected_count, mock_func.call_count)
+        mock_func.assert_has_calls(calls)
diff --git a/tempest/tests/lib/services/compute/test_flavors_client.py b/tempest/tests/lib/services/compute/test_flavors_client.py
index cbd17c6..5325036 100644
--- a/tempest/tests/lib/services/compute/test_flavors_client.py
+++ b/tempest/tests/lib/services/compute/test_flavors_client.py
@@ -17,6 +17,7 @@
 import fixtures
 from oslo_serialization import jsonutils as json
 
+from tempest.api.compute import api_microversion_fixture
 from tempest.lib.services.compute import flavors_client
 from tempest.tests.lib import fake_auth_provider
 from tempest.tests.lib import fake_http
@@ -39,6 +40,21 @@
         "vcpus": 1
     }
 
+    FAKE_FLAVOR_UPDATE = {
+        "disk": 1,
+        "id": "1",
+        "links": [{
+            "href": "http://openstack.example.com/v2/openstack/flavors/1",
+            "rel": "self"}, {
+            "href": "http://openstack.example.com/openstack/flavors/1",
+            "rel": "bookmark"}],
+        "name": "m1.tiny",
+        "ram": 512,
+        "swap": 1,
+        "vcpus": 1,
+        "description": 'new'
+    }
+
     EXTRA_SPECS = {"extra_specs": {
         "key1": "value1",
         "key2": "value2"}
@@ -106,6 +122,25 @@
     def test_create_flavor__byte_body(self):
         self._test_create_flavor(bytes_body=True)
 
+    def _test_update_flavor(self, bytes_body=False):
+        self.useFixture(api_microversion_fixture.APIMicroversionFixture(
+            '2.55'))
+        expected = {"flavor": TestFlavorsClient.FAKE_FLAVOR_UPDATE}
+        request = {"flavor": {"description": "updated description"}}
+        self.check_service_client_function(
+            self.client.update_flavor,
+            'tempest.lib.common.rest_client.RestClient.put',
+            expected,
+            bytes_body,
+            flavor_id='8c7aae5a-d315-4216-875b-ed9b6a5bcfc6',
+            **request)
+
+    def test_update_flavor_str_body(self):
+        self._test_update_flavor(bytes_body=False)
+
+    def test_update_flavor__byte_body(self):
+        self._test_update_flavor(bytes_body=True)
+
     def test_delete_flavor(self):
         self.check_service_client_function(
             self.client.delete_flavor,
diff --git a/tempest/tests/lib/services/compute/test_services_client.py b/tempest/tests/lib/services/compute/test_services_client.py
index 2dd981c..ba432e3 100644
--- a/tempest/tests/lib/services/compute/test_services_client.py
+++ b/tempest/tests/lib/services/compute/test_services_client.py
@@ -56,6 +56,20 @@
         }
     }
 
+    FAKE_UPDATE_SERVICE = {
+        "service": {
+            "id": "e81d66a4-ddd3-4aba-8a84-171d1cb4d339",
+            "binary": "nova-compute",
+            "disabled_reason": "test2",
+            "host": "host1",
+            "state": "down",
+            "status": "disabled",
+            "updated_at": "2012-10-29T13:42:05.000000",
+            "forced_down": False,
+            "zone": "nova"
+        }
+    }
+
     def setUp(self):
         super(TestServicesClient, self).setUp()
         fake_auth = fake_auth_provider.FakeAuthProvider()
@@ -119,6 +133,28 @@
             binary="controller",
             disabled_reason='test reason')
 
+    def _test_update_service(self, bytes_body=False, status=None,
+                             disabled_reason=None, forced_down=None):
+        resp_body = copy.deepcopy(self.FAKE_UPDATE_SERVICE)
+        kwargs = {}
+
+        if status is not None:
+            kwargs['status'] = status
+        if disabled_reason is not None:
+            kwargs['disabled_reason'] = disabled_reason
+        if forced_down is not None:
+            kwargs['forced_down'] = forced_down
+
+        resp_body['service'].update(kwargs)
+
+        self.check_service_client_function(
+            self.client.update_service,
+            'tempest.lib.common.rest_client.RestClient.put',
+            resp_body,
+            bytes_body,
+            service_id=resp_body['service']['id'],
+            **kwargs)
+
     def test_log_reason_disabled_service_with_str_body(self):
         self._test_log_reason_disabled_service()
 
@@ -144,3 +180,36 @@
                        new_callable=mock.PropertyMock(return_value='2.11'))
     def test_update_forced_down_with_bytes_body(self, _):
         self._test_update_forced_down(bytes_body=True)
+
+    @mock.patch.object(base_compute_client, 'COMPUTE_MICROVERSION',
+                       new_callable=mock.PropertyMock(return_value='2.53'))
+    def test_update_service_disable_scheduling_with_str_body(self, _):
+        self._test_update_service(status='disabled',
+                                  disabled_reason='maintenance')
+
+    @mock.patch.object(base_compute_client, 'COMPUTE_MICROVERSION',
+                       new_callable=mock.PropertyMock(return_value='2.53'))
+    def test_update_service_disable_scheduling_with_bytes_body(self, _):
+        self._test_update_service(status='disabled',
+                                  disabled_reason='maintenance',
+                                  bytes_body=True)
+
+    @mock.patch.object(base_compute_client, 'COMPUTE_MICROVERSION',
+                       new_callable=mock.PropertyMock(return_value='2.53'))
+    def test_update_service_enable_scheduling_with_str_body(self, _):
+        self._test_update_service(status='enabled')
+
+    @mock.patch.object(base_compute_client, 'COMPUTE_MICROVERSION',
+                       new_callable=mock.PropertyMock(return_value='2.53'))
+    def test_update_service_enable_scheduling_with_bytes_body(self, _):
+        self._test_update_service(status='enabled', bytes_body=True)
+
+    @mock.patch.object(base_compute_client, 'COMPUTE_MICROVERSION',
+                       new_callable=mock.PropertyMock(return_value='2.53'))
+    def test_update_service_forced_down_with_str_body(self, _):
+        self._test_update_service(forced_down=True)
+
+    @mock.patch.object(base_compute_client, 'COMPUTE_MICROVERSION',
+                       new_callable=mock.PropertyMock(return_value='2.53'))
+    def test_update_service_forced_down_with_bytes_body(self, _):
+        self._test_update_service(forced_down=True, bytes_body=True)
diff --git a/tempest/tests/lib/services/volume/v2/test_snapshot_manage_client.py b/tempest/tests/lib/services/volume/v2/test_snapshot_manage_client.py
index 3fe8970..e03a8eb 100644
--- a/tempest/tests/lib/services/volume/v2/test_snapshot_manage_client.py
+++ b/tempest/tests/lib/services/volume/v2/test_snapshot_manage_client.py
@@ -18,6 +18,8 @@
 from oslo_serialization import jsonutils as json
 
 from tempest.lib.services.volume.v2 import snapshot_manage_client
+from tempest.lib.services.volume.v3 import snapshot_manage_client \
+    as snapshot_manage_clientv3
 from tempest.tests.lib import fake_auth_provider
 from tempest.tests.lib.services import base
 
@@ -63,7 +65,7 @@
 
         # NOTE: Use sort_keys for json.dumps so that the expected and actual
         # payloads are guaranteed to be identical for mock_args assert check.
-        with mock.patch.object(snapshot_manage_client.json,
+        with mock.patch.object(snapshot_manage_clientv3.json,
                                'dumps') as mock_dumps:
             mock_dumps.side_effect = lambda d: json_dumps(d, sort_keys=True)
 
diff --git a/tempest/tests/lib/services/volume/v2/test_transfers_client.py b/tempest/tests/lib/services/volume/v2/test_transfers_client.py
index 84f4992..8e7c6f4 100644
--- a/tempest/tests/lib/services/volume/v2/test_transfers_client.py
+++ b/tempest/tests/lib/services/volume/v2/test_transfers_client.py
@@ -19,6 +19,8 @@
 from oslo_serialization import jsonutils as json
 
 from tempest.lib.services.volume.v2 import transfers_client
+from tempest.lib.services.volume.v3 import transfers_client \
+    as transfers_clientv3
 from tempest.tests.lib import fake_auth_provider
 from tempest.tests.lib.services import base
 
@@ -63,7 +65,7 @@
 
         # NOTE: Use sort_keys for json.dumps so that the expected and actual
         # payloads are guaranteed to be identical for mock_args assert check.
-        with mock.patch.object(transfers_client.json, 'dumps') as mock_dumps:
+        with mock.patch.object(transfers_clientv3.json, 'dumps') as mock_dumps:
             mock_dumps.side_effect = lambda d: json_dumps(d, sort_keys=True)
 
             self.check_service_client_function(
@@ -84,7 +86,7 @@
 
         # NOTE: Use sort_keys for json.dumps so that the expected and actual
         # payloads are guaranteed to be identical for mock_args assert check.
-        with mock.patch.object(transfers_client.json, 'dumps') as mock_dumps:
+        with mock.patch.object(transfers_clientv3.json, 'dumps') as mock_dumps:
             mock_dumps.side_effect = lambda d: json_dumps(d, sort_keys=True)
 
             self.check_service_client_function(
diff --git a/tempest/tests/lib/services/volume/v2/test_volume_manage_client.py b/tempest/tests/lib/services/volume/v2/test_volume_manage_client.py
index ea4a9f9..0fb66bb 100644
--- a/tempest/tests/lib/services/volume/v2/test_volume_manage_client.py
+++ b/tempest/tests/lib/services/volume/v2/test_volume_manage_client.py
@@ -18,6 +18,8 @@
 from oslo_serialization import jsonutils as json
 
 from tempest.lib.services.volume.v2 import volume_manage_client
+from tempest.lib.services.volume.v3 import volume_manage_client \
+    as volume_manage_clientv3
 from tempest.tests.lib import fake_auth_provider
 from tempest.tests.lib.services import base
 
@@ -91,7 +93,7 @@
 
         # NOTE: Use sort_keys for json.dumps so that the expected and actual
         # payloads are guaranteed to be identical for mock_args assert check.
-        with mock.patch.object(volume_manage_client.json,
+        with mock.patch.object(volume_manage_clientv3.json,
                                'dumps') as mock_dumps:
             mock_dumps.side_effect = lambda d: json_dumps(d, sort_keys=True)
 
diff --git a/tempest/tests/lib/services/volume/v2/test_volumes_client.py b/tempest/tests/lib/services/volume/v2/test_volumes_client.py
deleted file mode 100644
index d7b042e..0000000
--- a/tempest/tests/lib/services/volume/v2/test_volumes_client.py
+++ /dev/null
@@ -1,127 +0,0 @@
-# Copyright 2017 FiberHome Telecommunication Technologies CO.,LTD
-# All Rights Reserved.
-#
-#    Licensed under the Apache License, Version 2.0 (the "License"); you may
-#    not use this file except in compliance with the License. You may obtain
-#    a copy of the License at
-#
-#         http://www.apache.org/licenses/LICENSE-2.0
-#
-#    Unless required by applicable law or agreed to in writing, software
-#    distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
-#    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
-#    License for the specific language governing permissions and limitations
-#    under the License.
-
-from oslo_serialization import jsonutils as json
-
-from tempest.lib.services.volume.v2 import volumes_client
-from tempest.tests.lib import fake_auth_provider
-from tempest.tests.lib.services import base
-
-
-class TestVolumesClient(base.BaseServiceTest):
-
-    FAKE_VOLUME_METADATA_ITEM = {
-        "meta": {
-            "key1": "value1"
-        }
-    }
-
-    FAKE_VOLUME_IMAGE_METADATA = {
-        "metadata": {
-            "container_format": "bare",
-            "min_ram": "0",
-            "disk_format": "raw",
-            "image_name": "xly-ubuntu16-server",
-            "image_id": "3e087b0c-10c5-4255-b147-6e8e9dbad6fc",
-            "checksum": "008f5d22fe3cb825d714da79607a90f9",
-            "min_disk": "0",
-            "size": "8589934592"
-        }
-    }
-
-    def setUp(self):
-        super(TestVolumesClient, self).setUp()
-        fake_auth = fake_auth_provider.FakeAuthProvider()
-        self.client = volumes_client.VolumesClient(fake_auth,
-                                                   'volume',
-                                                   'regionOne')
-
-    def _test_retype_volume(self, bytes_body=False):
-        kwargs = {
-            "new_type": "dedup-tier-replication",
-            "migration_policy": "never"
-        }
-
-        self.check_service_client_function(
-            self.client.retype_volume,
-            'tempest.lib.common.rest_client.RestClient.post',
-            {},
-            to_utf=bytes_body,
-            status=202,
-            volume_id="a3be971b-8de5-4bdf-bdb8-3d8eb0fb69f8",
-            **kwargs
-        )
-
-    def _test_force_detach_volume(self, bytes_body=False):
-        kwargs = {
-            'attachment_id': '6980e295-920f-412e-b189-05c50d605acd',
-            'connector': {
-                'initiator': 'iqn.2017-04.org.fake:01'
-            }
-        }
-
-        self.check_service_client_function(
-            self.client.force_detach_volume,
-            'tempest.lib.common.rest_client.RestClient.post',
-            {},
-            to_utf=bytes_body,
-            status=202,
-            volume_id="a3be971b-8de5-4bdf-bdb8-3d8eb0fb69f8",
-            **kwargs
-        )
-
-    def _test_show_volume_metadata_item(self, bytes_body=False):
-        self.check_service_client_function(
-            self.client.show_volume_metadata_item,
-            'tempest.lib.common.rest_client.RestClient.get',
-            self.FAKE_VOLUME_METADATA_ITEM,
-            to_utf=bytes_body,
-            volume_id="a3be971b-8de5-4bdf-bdb8-3d8eb0fb69f8",
-            id="key1")
-
-    def _test_show_volume_image_metadata(self, bytes_body=False):
-        fake_volume_id = "a3be971b-8de5-4bdf-bdb8-3d8eb0fb69f8"
-        self.check_service_client_function(
-            self.client.show_volume_image_metadata,
-            'tempest.lib.common.rest_client.RestClient.post',
-            self.FAKE_VOLUME_IMAGE_METADATA,
-            to_utf=bytes_body,
-            mock_args=['volumes/%s/action' % fake_volume_id,
-                       json.dumps({"os-show_image_metadata": {}})],
-            volume_id=fake_volume_id)
-
-    def test_force_detach_volume_with_str_body(self):
-        self._test_force_detach_volume()
-
-    def test_force_detach_volume_with_bytes_body(self):
-        self._test_force_detach_volume(bytes_body=True)
-
-    def test_show_volume_metadata_item_with_str_body(self):
-        self._test_show_volume_metadata_item()
-
-    def test_show_volume_metadata_item_with_bytes_body(self):
-        self._test_show_volume_metadata_item(bytes_body=True)
-
-    def test_show_volume_image_metadata_with_str_body(self):
-        self._test_show_volume_image_metadata()
-
-    def test_show_volume_image_metadata_with_bytes_body(self):
-        self._test_show_volume_image_metadata(bytes_body=True)
-
-    def test_retype_volume_with_str_body(self):
-        self._test_retype_volume()
-
-    def test_retype_volume_with_bytes_body(self):
-        self._test_retype_volume(bytes_body=True)
diff --git a/tempest/tests/lib/services/volume/v3/test_services_client.py b/tempest/tests/lib/services/volume/v3/test_services_client.py
new file mode 100644
index 0000000..f65228f
--- /dev/null
+++ b/tempest/tests/lib/services/volume/v3/test_services_client.py
@@ -0,0 +1,214 @@
+# Copyright 2018 FiberHome Telecommunication Technologies CO.,LTD
+# All Rights Reserved.
+#
+#    Licensed under the Apache License, Version 2.0 (the "License"); you may
+#    not use this file except in compliance with the License. You may obtain
+#    a copy of the License at
+#
+#         http://www.apache.org/licenses/LICENSE-2.0
+#
+#    Unless required by applicable law or agreed to in writing, software
+#    distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+#    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+#    License for the specific language governing permissions and limitations
+#    under the License.
+
+import copy
+
+import mock
+from oslo_serialization import jsonutils as json
+
+from tempest.lib.services.volume.v3 import services_client
+from tempest.tests.lib import fake_auth_provider
+from tempest.tests.lib.services import base
+
+
+class TestServicesClient(base.BaseServiceTest):
+
+    FAKE_SERVICE_LIST = {
+        "services": [
+            {
+                "status": "enabled",
+                "binary": "cinder-backup",
+                "zone": "nova",
+                "state": "up",
+                "updated_at": "2017-07-20T07:20:17.000000",
+                "host": "fake-host",
+                "disabled_reason": None
+            },
+            {
+                "status": "enabled",
+                "binary": "cinder-scheduler",
+                "zone": "nova",
+                "state": "up",
+                "updated_at": "2017-07-20T07:20:24.000000",
+                "host": "fake-host",
+                "disabled_reason": None
+            },
+            {
+                "status": "enabled",
+                "binary": "cinder-volume",
+                "zone": "nova",
+                "frozen": False,
+                "state": "up",
+                "updated_at": "2017-07-20T07:20:20.000000",
+                "host": "fake-host@lvm",
+                "replication_status": "disabled",
+                "active_backend_id": None,
+                "disabled_reason": None
+            }
+        ]
+    }
+
+    FAKE_SERVICE_REQUEST = {
+        "host": "fake-host",
+        "binary": "cinder-volume"
+    }
+
+    FAKE_SERVICE_RESPONSE = {
+        "disabled": False,
+        "status": "enabled",
+        "host": "fake-host@lvm",
+        "service": "",
+        "binary": "cinder-volume",
+        "disabled_reason": None
+    }
+
+    def setUp(self):
+        super(TestServicesClient, self).setUp()
+        fake_auth = fake_auth_provider.FakeAuthProvider()
+        self.client = services_client.ServicesClient(fake_auth,
+                                                     'volume',
+                                                     'regionOne')
+
+    def _test_list_services(self, bytes_body=False,
+                            mock_args='os-services', **params):
+        self.check_service_client_function(
+            self.client.list_services,
+            'tempest.lib.common.rest_client.RestClient.get',
+            self.FAKE_SERVICE_LIST,
+            to_utf=bytes_body,
+            mock_args=[mock_args],
+            **params)
+
+    def _test_enable_service(self, bytes_body=False):
+        resp_body = self.FAKE_SERVICE_RESPONSE
+        kwargs = self.FAKE_SERVICE_REQUEST
+        payload = json.dumps(kwargs, sort_keys=True)
+        json_dumps = json.dumps
+
+        # NOTE: Use sort_keys for json.dumps so that the expected and actual
+        # payloads are guaranteed to be identical for mock_args assert check.
+        with mock.patch.object(services_client.json, 'dumps') as mock_dumps:
+            mock_dumps.side_effect = lambda d: json_dumps(d, sort_keys=True)
+
+            self.check_service_client_function(
+                self.client.enable_service,
+                'tempest.lib.common.rest_client.RestClient.put',
+                resp_body,
+                to_utf=bytes_body,
+                mock_args=['os-services/enable', payload],
+                **kwargs)
+
+    def _test_disable_service(self, bytes_body=False):
+        resp_body = copy.deepcopy(self.FAKE_SERVICE_RESPONSE)
+        resp_body.pop('disabled_reason')
+        resp_body['disabled'] = True
+        resp_body['status'] = 'disabled'
+        kwargs = self.FAKE_SERVICE_REQUEST
+        payload = json.dumps(kwargs, sort_keys=True)
+        json_dumps = json.dumps
+
+        # NOTE: Use sort_keys for json.dumps so that the expected and actual
+        # payloads are guaranteed to be identical for mock_args assert check.
+        with mock.patch.object(services_client.json, 'dumps') as mock_dumps:
+            mock_dumps.side_effect = lambda d: json_dumps(d, sort_keys=True)
+
+            self.check_service_client_function(
+                self.client.disable_service,
+                'tempest.lib.common.rest_client.RestClient.put',
+                resp_body,
+                to_utf=bytes_body,
+                mock_args=['os-services/disable', payload],
+                **kwargs)
+
+    def _test_disable_log_reason(self, bytes_body=False):
+        resp_body = copy.deepcopy(self.FAKE_SERVICE_RESPONSE)
+        resp_body['disabled_reason'] = "disabled for test"
+        resp_body['disabled'] = True
+        resp_body['status'] = 'disabled'
+        kwargs = copy.deepcopy(self.FAKE_SERVICE_REQUEST)
+        kwargs.update({"disabled_reason": "disabled for test"})
+        payload = json.dumps(kwargs, sort_keys=True)
+        json_dumps = json.dumps
+
+        # NOTE: Use sort_keys for json.dumps so that the expected and actual
+        # payloads are guaranteed to be identical for mock_args assert check.
+        with mock.patch.object(services_client.json, 'dumps') as mock_dumps:
+            mock_dumps.side_effect = lambda d: json_dumps(d, sort_keys=True)
+
+            self.check_service_client_function(
+                self.client.disable_log_reason,
+                'tempest.lib.common.rest_client.RestClient.put',
+                resp_body,
+                to_utf=bytes_body,
+                mock_args=['os-services/disable-log-reason', payload],
+                **kwargs)
+
+    def _test_freeze_host(self, bytes_body=False):
+        kwargs = {'host': 'host1@lvm'}
+        self.check_service_client_function(
+            self.client.freeze_host,
+            'tempest.lib.common.rest_client.RestClient.put',
+            {},
+            bytes_body,
+            **kwargs)
+
+    def _test_thaw_host(self, bytes_body=False):
+        kwargs = {'host': 'host1@lvm'}
+        self.check_service_client_function(
+            self.client.thaw_host,
+            'tempest.lib.common.rest_client.RestClient.put',
+            {},
+            bytes_body,
+            **kwargs)
+
+    def test_list_services_with_str_body(self):
+        self._test_list_services()
+
+    def test_list_services_with_bytes_body(self):
+        self._test_list_services(bytes_body=True)
+
+    def test_list_services_with_params(self):
+        mock_args = 'os-services?host=fake-host'
+        self._test_list_services(mock_args=mock_args, host='fake-host')
+
+    def test_enable_service_with_str_body(self):
+        self._test_enable_service()
+
+    def test_enable_service_with_bytes_body(self):
+        self._test_enable_service(bytes_body=True)
+
+    def test_disable_service_with_str_body(self):
+        self._test_disable_service()
+
+    def test_disable_service_with_bytes_body(self):
+        self._test_disable_service(bytes_body=True)
+
+    def test_disable_log_reason_with_str_body(self):
+        self._test_disable_log_reason()
+
+    def test_disable_log_reason_with_bytes_body(self):
+        self._test_disable_log_reason(bytes_body=True)
+
+    def test_freeze_host_with_str_body(self):
+        self._test_freeze_host()
+
+    def test_freeze_host_with_bytes_body(self):
+        self._test_freeze_host(bytes_body=True)
+
+    def test_thaw_host_with_str_body(self):
+        self._test_thaw_host()
+
+    def test_thaw_host_with_bytes_body(self):
+        self._test_thaw_host(bytes_body=True)
diff --git a/tempest/tests/lib/services/volume/v3/test_volumes_client.py b/tempest/tests/lib/services/volume/v3/test_volumes_client.py
index a515fd3..1250536 100644
--- a/tempest/tests/lib/services/volume/v3/test_volumes_client.py
+++ b/tempest/tests/lib/services/volume/v3/test_volumes_client.py
@@ -13,6 +13,8 @@
 #    License for the specific language governing permissions and limitations
 #    under the License.
 
+from oslo_serialization import jsonutils as json
+
 from tempest.lib.services.volume.v3 import volumes_client
 from tempest.tests.lib import fake_auth_provider
 from tempest.tests.lib.services import base
@@ -27,6 +29,25 @@
         }
     }
 
+    FAKE_VOLUME_METADATA_ITEM = {
+        "meta": {
+            "key1": "value1"
+        }
+    }
+
+    FAKE_VOLUME_IMAGE_METADATA = {
+        "metadata": {
+            "container_format": "bare",
+            "min_ram": "0",
+            "disk_format": "raw",
+            "image_name": "xly-ubuntu16-server",
+            "image_id": "3e087b0c-10c5-4255-b147-6e8e9dbad6fc",
+            "checksum": "008f5d22fe3cb825d714da79607a90f9",
+            "min_disk": "0",
+            "size": "8589934592"
+        }
+    }
+
     def setUp(self):
         super(TestVolumesClient, self).setUp()
         fake_auth = fake_auth_provider.FakeAuthProvider()
@@ -34,6 +55,60 @@
                                                    'volume',
                                                    'regionOne')
 
+    def _test_retype_volume(self, bytes_body=False):
+        kwargs = {
+            "new_type": "dedup-tier-replication",
+            "migration_policy": "never"
+        }
+
+        self.check_service_client_function(
+            self.client.retype_volume,
+            'tempest.lib.common.rest_client.RestClient.post',
+            {},
+            to_utf=bytes_body,
+            status=202,
+            volume_id="a3be971b-8de5-4bdf-bdb8-3d8eb0fb69f8",
+            **kwargs
+        )
+
+    def _test_force_detach_volume(self, bytes_body=False):
+        kwargs = {
+            'attachment_id': '6980e295-920f-412e-b189-05c50d605acd',
+            'connector': {
+                'initiator': 'iqn.2017-04.org.fake:01'
+            }
+        }
+
+        self.check_service_client_function(
+            self.client.force_detach_volume,
+            'tempest.lib.common.rest_client.RestClient.post',
+            {},
+            to_utf=bytes_body,
+            status=202,
+            volume_id="a3be971b-8de5-4bdf-bdb8-3d8eb0fb69f8",
+            **kwargs
+        )
+
+    def _test_show_volume_metadata_item(self, bytes_body=False):
+        self.check_service_client_function(
+            self.client.show_volume_metadata_item,
+            'tempest.lib.common.rest_client.RestClient.get',
+            self.FAKE_VOLUME_METADATA_ITEM,
+            to_utf=bytes_body,
+            volume_id="a3be971b-8de5-4bdf-bdb8-3d8eb0fb69f8",
+            id="key1")
+
+    def _test_show_volume_image_metadata(self, bytes_body=False):
+        fake_volume_id = "a3be971b-8de5-4bdf-bdb8-3d8eb0fb69f8"
+        self.check_service_client_function(
+            self.client.show_volume_image_metadata,
+            'tempest.lib.common.rest_client.RestClient.post',
+            self.FAKE_VOLUME_IMAGE_METADATA,
+            to_utf=bytes_body,
+            mock_args=['volumes/%s/action' % fake_volume_id,
+                       json.dumps({"os-show_image_metadata": {}})],
+            volume_id=fake_volume_id)
+
     def _test_show_volume_summary(self, bytes_body=False):
         self.check_service_client_function(
             self.client.show_volume_summary,
@@ -41,6 +116,30 @@
             self.FAKE_VOLUME_SUMMARY,
             bytes_body)
 
+    def test_force_detach_volume_with_str_body(self):
+        self._test_force_detach_volume()
+
+    def test_force_detach_volume_with_bytes_body(self):
+        self._test_force_detach_volume(bytes_body=True)
+
+    def test_show_volume_metadata_item_with_str_body(self):
+        self._test_show_volume_metadata_item()
+
+    def test_show_volume_metadata_item_with_bytes_body(self):
+        self._test_show_volume_metadata_item(bytes_body=True)
+
+    def test_show_volume_image_metadata_with_str_body(self):
+        self._test_show_volume_image_metadata()
+
+    def test_show_volume_image_metadata_with_bytes_body(self):
+        self._test_show_volume_image_metadata(bytes_body=True)
+
+    def test_retype_volume_with_str_body(self):
+        self._test_retype_volume()
+
+    def test_retype_volume_with_bytes_body(self):
+        self._test_retype_volume(bytes_body=True)
+
     def test_show_volume_summary_with_str_body(self):
         self._test_show_volume_summary()
 
diff --git a/tempest/tests/test_list_tests.py b/tempest/tests/test_list_tests.py
index 4af7463..1cc9c9a 100644
--- a/tempest/tests/test_list_tests.py
+++ b/tempest/tests/test_list_tests.py
@@ -34,7 +34,7 @@
                          "error on import %s" % ids)
         ids = six.text_type(ids).split('\n')
         for test_id in ids:
-            if re.match('(\w+\.){3}\w+', test_id):
+            if re.match(r'(\w+\.){3}\w+', test_id):
                 if not test_id.startswith('tempest.'):
                     parts = test_id.partition('tempest')
                     fail_id = parts[1] + parts[2]
diff --git a/tools/check_logs.py b/tools/check_logs.py
index b80ccc0..de7e41d 100755
--- a/tools/check_logs.py
+++ b/tools/check_logs.py
@@ -96,7 +96,7 @@
 def collect_url_logs(url):
     page = urlreq.urlopen(url)
     content = page.read()
-    logs = re.findall('(screen-[\w-]+\.txt\.gz)</a>', content)
+    logs = re.findall(r'(screen-[\w-]+\.txt\.gz)</a>', content)
     return logs
 
 
@@ -162,6 +162,7 @@
     print("ok")
     return 0
 
+
 usage = """
 Find non-white-listed log errors in log files from a devstack-gate run.
 Log files will be searched for ERROR or CRITICAL messages. If any
diff --git a/tools/generate-tempest-plugins-list.py b/tools/generate-tempest-plugins-list.py
index bbb9019..4eb78fb 100644
--- a/tools/generate-tempest-plugins-list.py
+++ b/tools/generate-tempest-plugins-list.py
@@ -63,12 +63,13 @@
     except HTTPError as err:
         if err.code == 404:
             return False
-    p = re.compile('^tempest\.test_plugins', re.M)
+    p = re.compile(r'^tempest\.test_plugins', re.M)
     if p.findall(r.read().decode('utf-8')):
         return True
     else:
         False
 
+
 r = urllib.urlopen(url)
 # Gerrit prepends 4 garbage octets to the JSON, in order to counter
 # cross-site scripting attacks.  Therefore we must discard it so the
diff --git a/tox.ini b/tox.ini
index da0233a..de4f1b7 100644
--- a/tox.ini
+++ b/tox.ini
@@ -19,7 +19,7 @@
     OS_STDOUT_CAPTURE=1
     OS_STDERR_CAPTURE=1
     OS_TEST_TIMEOUT=160
-    PYTHONWARNINGS=default::DeprecationWarning
+    PYTHONWARNINGS=default::DeprecationWarning,ignore::DeprecationWarning:distutils,ignore::DeprecationWarning:site
 passenv = OS_STDOUT_CAPTURE OS_STDERR_CAPTURE OS_TEST_TIMEOUT OS_TEST_LOCK_PATH TEMPEST_CONFIG TEMPEST_CONFIG_DIR http_proxy HTTP_PROXY https_proxy HTTPS_PROXY no_proxy NO_PROXY ZUUL_CACHE_DIR REQUIREMENTS_PIP_LOCATION GENERATE_TEMPEST_PLUGIN_LIST
 usedevelop = True
 install_command = pip install {opts} {packages}