diff --git a/HACKING.rst b/HACKING.rst
index 81a7c2c..04b5eb6 100644
--- a/HACKING.rst
+++ b/HACKING.rst
@@ -312,3 +312,57 @@
          * Boot an additional instance from the new snapshot based volume
          * Check written content in the instance booted from snapshot
         """
+
+Branchless Tempest Considerations
+---------------------------------
+
+Starting with the OpenStack Icehouse release Tempest no longer has any stable
+branches. This is to better ensure API consistency between releases because
+the API behavior should not change between releases. This means that the stable
+branches are also gated by the Tempest master branch, which also means that
+proposed commits to Tempest must work against both the master and all the
+currently supported stable branches of the projects. As such there are a few
+special considerations that have to be accounted for when pushing new changes
+to tempest.
+
+1. New Tests for new features
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+When adding tests for new features that were not in previous releases of the
+projects the new test has to be properly skipped with a feature flag. Whether
+this is just as simple as using the @test.requires_ext() decorator to check
+if the required extension (or discoverable optional API) is enabled or adding
+a new config option to the appropriate section. If there isn't a method of
+selecting the new **feature** from the config file then there won't be a
+mechanism to disable the test with older stable releases and the new test won't
+be able to merge.
+
+2. Bug fix on core project needing Tempest changes
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+When trying to land a bug fix which changes a tested API you'll have to use the
+following procedure::
+
+    - Propose change to the project, get a +2 on the change even with failing
+    - Propose skip on Tempest which will only be approved after the
+      corresponding change in the project has a +2 on change
+    - Land project change in master and all open stable branches (if required)
+    - Land changed test in Tempest
+
+Otherwise the bug fix won't be able to land in the project.
+
+3. New Tests for existing features
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+If a test is being added for a feature that exists in all the current releases
+of the projects then the only concern is that the API behavior is the same
+across all the versions of the project being tested. If the behavior is not
+consistent the test will not be able to merge.
+
+API Stability
+-------------
+
+For new tests being added to Tempest the assumption is that the API being
+tested is considered stable and adheres to the OpenStack API stability
+guidelines. If an API is still considered experimental or in development then
+it should not be tested by Tempest until it is considered stable.
diff --git a/README.rst b/README.rst
index 7af0025..9aaea24 100644
--- a/README.rst
+++ b/README.rst
@@ -59,50 +59,49 @@
     will have a configuration file already set up to work with your
     devstack installation.
 
-Tempest is not tied to any single test runner, but testr is the most commonly
-used tool. After setting up your configuration file, you can execute
-the set of Tempest tests by using ``testr`` ::
+Tempest is not tied to any single test runner, but `testr`_ is the most commonly
+used tool. Also, the nosetests test runner is **not** recommended to run tempest.
+
+After setting up your configuration file, you can execute the set of Tempest
+tests by using ``testr`` ::
 
     $> testr run --parallel
 
-To run one single test  ::
+.. _testr: http://testrepository.readthedocs.org/en/latest/MANUAL.html
 
-    $> testr run --parallel tempest.api.compute.servers.test_servers_negative.ServersNegativeTestJSON.test_reboot_non_existent_server
+To run one single test serially ::
+
+    $> testr run tempest.api.compute.servers.test_servers_negative.ServersNegativeTestJSON.test_reboot_non_existent_server
 
 Alternatively, you can use the run_tempest.sh script which will create a venv
-and run the tests or use tox to do the same.
+and run the tests or use tox to do the same. Tox also contains several existing
+job configurations. For example::
+
+   $> tox -efull
+
+which will run the same set of tests as the OpenStack gate. (it's exactly how
+the gate invokes tempest) Or::
+
+  $> tox -esmoke
+
+to run the tests tagged as smoke.
+
 
 Configuration
 -------------
 
 Detailed configuration of tempest is beyond the scope of this
-document. The etc/tempest.conf.sample attempts to be a self
-documenting version of the configuration.
+document see :ref:`tempest-configuration` for more details on configuring
+tempest. The etc/tempest.conf.sample attempts to be a self documenting version
+of the configuration.
 
-To generate the sample tempest.conf file, run the following
+You can generate a new sample tempest.conf file, run the following
 command from the top level of the tempest directory:
 
   tox -egenconfig
 
 The most important pieces that are needed are the user ids, openstack
-endpoints, and basic flavors and images needed to run tests.
-
-Common Issues
--------------
-
-Tempest was originally designed to primarily run against a full OpenStack
-deployment. Due to that focus, some issues may occur when running Tempest
-against devstack.
-
-Running Tempest, especially in parallel, against a devstack instance may
-cause requests to be rate limited, which will cause unexpected failures.
-Given the number of requests Tempest can make against a cluster, rate limiting
-should be disabled for all test accounts.
-
-Additionally, devstack only provides a single image which Nova can use.
-For the moment, the best solution is to provide the same image uuid for
-both image_ref and image_ref_alt. Tempest will skip tests as needed if it
-detects that both images are the same.
+endpoint, and basic flavors and images needed to run tests.
 
 Unit Tests
 ----------
@@ -132,57 +131,3 @@
 on an earlier release with python 2.6 you can easily run tempest against it
 from a remote system running python 2.7. (or deploy a cloud guest in your cloud
 that has python 2.7)
-
-Branchless Tempest Considerations
----------------------------------
-
-Starting with the OpenStack Icehouse release Tempest no longer has any stable
-branches. This is to better ensure API consistency between releases because
-the API behavior should not change between releases. This means that the stable
-branches are also gated by the Tempest master branch, which also means that
-proposed commits to Tempest must work against both the master and all the
-currently supported stable branches of the projects. As such there are a few
-special considerations that have to be accounted for when pushing new changes
-to tempest.
-
-1. New Tests for new features
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-When adding tests for new features that were not in previous releases of the
-projects the new test has to be properly skipped with a feature flag. Whether
-this is just as simple as using the @test.requires_ext() decorator to check
-if the required extension (or discoverable optional API) is enabled or adding
-a new config option to the appropriate section. If there isn't a method of
-selecting the new **feature** from the config file then there won't be a
-mechanism to disable the test with older stable releases and the new test won't
-be able to merge.
-
-2. Bug fix on core project needing Tempest changes
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-When trying to land a bug fix which changes a tested API you'll have to use the
-following procedure::
-
-    - Propose change to the project, get a +2 on the change even with failing
-    - Propose skip on Tempest which will only be approved after the
-      corresponding change in the project has a +2 on change
-    - Land project change in master and all open stable branches (if required)
-    - Land changed test in Tempest
-
-Otherwise the bug fix won't be able to land in the project.
-
-3. New Tests for existing features
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-If a test is being added for a feature that exists in all the current releases
-of the projects then the only concern is that the API behavior is the same
-across all the versions of the project being tested. If the behavior is not
-consistent the test will not be able to merge.
-
-API Stability
--------------
-
-For new tests being added to Tempest the assumption is that the API being
-tested is considered stable and adheres to the OpenStack API stability
-guidelines. If an API is still considered experimental or in development then
-it should not be tested by Tempest until it is considered stable.
diff --git a/doc/source/configuration.rst b/doc/source/configuration.rst
index f772aa3..a7c8fb7 100644
--- a/doc/source/configuration.rst
+++ b/doc/source/configuration.rst
@@ -1,3 +1,5 @@
+.. _tempest-configuration:
+
 Tempest Configuration Guide
 ===========================
 
diff --git a/requirements.txt b/requirements.txt
index f6e30ce..56796d8 100644
--- a/requirements.txt
+++ b/requirements.txt
@@ -12,7 +12,6 @@
 python-ceilometerclient>=1.0.6
 python-glanceclient>=0.15.0
 python-keystoneclient>=1.1.0
-python-neutronclient>=2.3.11,<3
 python-cinderclient>=1.1.0
 python-heatclient>=0.3.0
 python-ironicclient>=0.2.1
diff --git a/tempest/api/compute/admin/test_baremetal_nodes.py b/tempest/api/compute/admin/test_baremetal_nodes.py
index 1381f80..64099c3 100644
--- a/tempest/api/compute/admin/test_baremetal_nodes.py
+++ b/tempest/api/compute/admin/test_baremetal_nodes.py
@@ -31,14 +31,26 @@
             skip_msg = ('%s skipped as Ironic is not available' % cls.__name__)
             raise cls.skipException(skip_msg)
         cls.client = cls.os_adm.baremetal_nodes_client
+        cls.ironic_client = cls.os_adm.baremetal_client
 
-    @test.attr(type='smoke')
+    @test.attr(type=['smoke', 'baremetal'])
     @test.idempotent_id('e475aa6e-416d-4fa4-b3af-28d5e84250fb')
-    def test_list_baremetal_nodes(self):
-        # List all baremetal nodes.
-        baremetal_nodes = self.client.list_baremetal_nodes()
-        self.assertNotEmpty(baremetal_nodes, "No baremetal nodes found.")
+    def test_list_get_baremetal_nodes(self):
+        # Create some test nodes in Ironic directly
+        test_nodes = []
+        for i in range(0, 3):
+            _, node = self.ironic_client.create_node()
+            test_nodes.append(node)
+            self.addCleanup(self.ironic_client.delete_node, node['uuid'])
 
-        for node in baremetal_nodes:
-            baremetal_node = self.client.get_baremetal_node(node['id'])
-            self.assertEqual(node['id'], baremetal_node['id'])
+        # List all baremetal nodes and ensure our created test nodes are
+        # listed
+        bm_node_ids = set([n['id'] for n in
+                           self.client.list_baremetal_nodes()])
+        test_node_ids = set([n['uuid'] for n in test_nodes])
+        self.assertTrue(test_node_ids.issubset(bm_node_ids))
+
+        # Test getting each individually
+        for node in test_nodes:
+            baremetal_node = self.client.get_baremetal_node(node['uuid'])
+            self.assertEqual(node['uuid'], baremetal_node['id'])
diff --git a/tempest/api/identity/admin/v3/test_default_project_id.py b/tempest/api/identity/admin/v3/test_default_project_id.py
index 5555ee8..9841cc8 100644
--- a/tempest/api/identity/admin/v3/test_default_project_id.py
+++ b/tempest/api/identity/admin/v3/test_default_project_id.py
@@ -76,7 +76,7 @@
         # create a new client with user's credentials (NOTE: unscoped token!)
         creds = auth.KeystoneV3Credentials(username=user_name,
                                            password=user_name,
-                                           domain_name=dom_name)
+                                           user_domain_name=dom_name)
         auth_provider = manager.get_auth_provider(creds)
         creds = auth_provider.fill_credentials()
         admin_client = clients.Manager(credentials=creds)
diff --git a/tempest/api/identity/admin/v3/test_roles.py b/tempest/api/identity/admin/v3/test_roles.py
index 0611393..b5b1d7b 100644
--- a/tempest/api/identity/admin/v3/test_roles.py
+++ b/tempest/api/identity/admin/v3/test_roles.py
@@ -144,11 +144,11 @@
         self.client.add_group_user(self.group_body['id'], self.user_body['id'])
         self.addCleanup(self.client.delete_group_user,
                         self.group_body['id'], self.user_body['id'])
-        body = self.token.auth(user=self.user_body['id'],
+        body = self.token.auth(user_id=self.user_body['id'],
                                password=self.u_password,
-                               user_domain=self.domain['name'],
-                               project=self.project['name'],
-                               project_domain=self.domain['name'])
+                               user_domain_name=self.domain['name'],
+                               project_name=self.project['name'],
+                               project_domain_name=self.domain['name'])
         roles = body['token']['roles']
         self.assertEqual(len(roles), 1)
         self.assertEqual(roles[0]['id'], self.role['id'])
diff --git a/tempest/api/identity/admin/v3/test_tokens.py b/tempest/api/identity/admin/v3/test_tokens.py
index 5cc498f..7358ce9 100644
--- a/tempest/api/identity/admin/v3/test_tokens.py
+++ b/tempest/api/identity/admin/v3/test_tokens.py
@@ -36,7 +36,8 @@
             email=u_email)
         self.addCleanup(self.client.delete_user, user['id'])
         # Perform Authentication
-        resp = self.token.auth(user['id'], u_password).response
+        resp = self.token.auth(user_id=user['id'],
+                               password=u_password).response
         subject_token = resp['x-subject-token']
         # Perform GET Token
         token_details = self.client.get_token(subject_token)
@@ -87,7 +88,7 @@
                                      role['id'])
 
         # Get an unscoped token.
-        token_auth = self.token.auth(user=user['id'],
+        token_auth = self.token.auth(user_id=user['id'],
                                      password=user_password)
 
         token_id = token_auth.response['x-subject-token']
@@ -110,8 +111,8 @@
 
         # Use the unscoped token to get a scoped token.
         token_auth = self.token.auth(token=token_id,
-                                     project=project1_name,
-                                     project_domain='Default')
+                                     project_name=project1_name,
+                                     project_domain_name='Default')
         token1_id = token_auth.response['x-subject-token']
 
         self.assertEqual(orig_expires_at, token_auth['token']['expires_at'],
@@ -140,8 +141,8 @@
 
         # Now get another scoped token using the unscoped token.
         token_auth = self.token.auth(token=token_id,
-                                     project=project2_name,
-                                     project_domain='Default')
+                                     project_name=project2_name,
+                                     project_domain_name='Default')
 
         self.assertEqual(project2['id'],
                          token_auth['token']['project']['id'])
diff --git a/tempest/api/identity/admin/v3/test_users.py b/tempest/api/identity/admin/v3/test_users.py
index f29e72a..9d9f61c 100644
--- a/tempest/api/identity/admin/v3/test_users.py
+++ b/tempest/api/identity/admin/v3/test_users.py
@@ -79,7 +79,8 @@
         new_password = data_utils.rand_name('pass1')
         self.client.update_user_password(user['id'], new_password,
                                          original_password)
-        resp = self.token.auth(user['id'], new_password).response
+        resp = self.token.auth(user_id=user['id'],
+                               password=new_password).response
         subject_token = resp['x-subject-token']
         # Perform GET Token to verify and confirm password is updated
         token_details = self.client.get_token(subject_token)
diff --git a/tempest/api/volume/admin/test_volume_quotas.py b/tempest/api/volume/admin/test_volume_quotas.py
index 7a64de3..86d90f6 100644
--- a/tempest/api/volume/admin/test_volume_quotas.py
+++ b/tempest/api/volume/admin/test_volume_quotas.py
@@ -95,7 +95,8 @@
         self.assertEqual(quota_usage['volumes']['in_use'] + 1,
                          new_quota_usage['volumes']['in_use'])
 
-        self.assertEqual(quota_usage['gigabytes']['in_use'] + 1,
+        self.assertEqual(quota_usage['gigabytes']['in_use'] +
+                         volume["size"],
                          new_quota_usage['gigabytes']['in_use'])
 
     @test.attr(type='gate')
diff --git a/tempest/api/volume/admin/test_volume_quotas_negative.py b/tempest/api/volume/admin/test_volume_quotas_negative.py
index 98b7143..d7287f0 100644
--- a/tempest/api/volume/admin/test_volume_quotas_negative.py
+++ b/tempest/api/volume/admin/test_volume_quotas_negative.py
@@ -31,7 +31,9 @@
     @classmethod
     def resource_setup(cls):
         super(BaseVolumeQuotasNegativeV2TestJSON, cls).resource_setup()
-        cls.shared_quota_set = {'gigabytes': 3, 'volumes': 1, 'snapshots': 1}
+        cls.default_volume_size = cls.volumes_client.default_volume_size
+        cls.shared_quota_set = {'gigabytes': 3 * cls.default_volume_size,
+                                'volumes': 1, 'snapshots': 1}
 
         # NOTE(gfidente): no need to restore original quota set
         # after the tests as they only work with tenant isolation.
@@ -67,14 +69,16 @@
                         self.demo_tenant_id,
                         **self.shared_quota_set)
 
-        new_quota_set = {'gigabytes': 2, 'volumes': 2, 'snapshots': 1}
+        new_quota_set = {'gigabytes': 2 * self.default_volume_size,
+                         'volumes': 2, 'snapshots': 1}
         self.quotas_client.update_quota_set(
             self.demo_tenant_id,
             **new_quota_set)
         self.assertRaises(lib_exc.OverLimit,
                           self.volumes_client.create_volume)
 
-        new_quota_set = {'gigabytes': 2, 'volumes': 1, 'snapshots': 2}
+        new_quota_set = {'gigabytes': 2 * self.default_volume_size,
+                         'volumes': 1, 'snapshots': 2}
         self.quotas_client.update_quota_set(
             self.demo_tenant_id,
             **self.shared_quota_set)
diff --git a/tempest/auth.py b/tempest/auth.py
index 3247cb5..113ad69 100644
--- a/tempest/auth.py
+++ b/tempest/auth.py
@@ -328,11 +328,17 @@
 
     def _auth_params(self):
         return dict(
-            user=self.credentials.username,
+            user_id=self.credentials.user_id,
+            username=self.credentials.username,
             password=self.credentials.password,
-            project=self.credentials.tenant_name,
-            user_domain=self.credentials.user_domain_name,
-            project_domain=self.credentials.project_domain_name,
+            project_id=self.credentials.project_id,
+            project_name=self.credentials.project_name,
+            user_domain_id=self.credentials.user_domain_id,
+            user_domain_name=self.credentials.user_domain_name,
+            project_domain_id=self.credentials.project_domain_id,
+            project_domain_name=self.credentials.project_domain_name,
+            domain_id=self.credentials.domain_id,
+            domain_name=self.credentials.domain_name,
             auth_data=True)
 
     def _fill_credentials(self, auth_data_body):
@@ -579,7 +585,7 @@
     Credentials suitable for the Keystone Identity V3 API
     """
 
-    ATTRIBUTES = ['domain_name', 'password', 'tenant_name', 'username',
+    ATTRIBUTES = ['domain_id', 'domain_name', 'password', 'username',
                   'project_domain_id', 'project_domain_name', 'project_id',
                   'project_name', 'tenant_id', 'tenant_name', 'user_domain_id',
                   'user_domain_name', 'user_id']
@@ -625,6 +631,8 @@
         - None
         - Project id (optional domain)
         - Project name and its domain id/name
+        - Domain id
+        - Domain name
         """
         valid_user_domain = any(
             [self.user_domain_id is not None,
@@ -635,11 +643,16 @@
         valid_user = any(
             [self.user_id is not None,
              self.username is not None and valid_user_domain])
-        valid_project = any(
+        valid_project_scope = any(
             [self.project_name is None and self.project_id is None,
              self.project_id is not None,
              self.project_name is not None and valid_project_domain])
-        return all([self.password is not None, valid_user, valid_project])
+        valid_domain_scope = any(
+            [self.domain_id is None and self.domain_name is None,
+             self.domain_id or self.domain_name])
+        return all([self.password is not None,
+                    valid_user,
+                    valid_project_scope and valid_domain_scope])
 
 
 IDENTITY_VERSION = {'v2': (KeystoneV2Credentials, KeystoneV2AuthProvider),
diff --git a/tempest/cli/simple_read_only/network/__init__.py b/tempest/cli/simple_read_only/network/__init__.py
deleted file mode 100644
index e69de29..0000000
--- a/tempest/cli/simple_read_only/network/__init__.py
+++ /dev/null
diff --git a/tempest/cli/simple_read_only/network/test_neutron.py b/tempest/cli/simple_read_only/network/test_neutron.py
deleted file mode 100644
index e8b3554..0000000
--- a/tempest/cli/simple_read_only/network/test_neutron.py
+++ /dev/null
@@ -1,285 +0,0 @@
-# Copyright 2013 OpenStack Foundation
-# All Rights Reserved.
-#
-#    Licensed under the Apache License, Version 2.0 (the "License"); you may
-#    not use this file except in compliance with the License. You may obtain
-#    a copy of the License at
-#
-#         http://www.apache.org/licenses/LICENSE-2.0
-#
-#    Unless required by applicable law or agreed to in writing, software
-#    distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
-#    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
-#    License for the specific language governing permissions and limitations
-#    under the License.
-
-import re
-
-from oslo_log import log as logging
-from tempest_lib import exceptions
-
-from tempest import cli
-from tempest import config
-from tempest import test
-
-CONF = config.CONF
-
-LOG = logging.getLogger(__name__)
-
-
-class SimpleReadOnlyNeutronClientTest(cli.ClientTestBase):
-    """Basic, read-only tests for Neutron CLI client.
-
-    Checks return values and output of read-only commands.
-    These tests do not presume any content, nor do they create
-    their own. They only verify the structure of output if present.
-    """
-
-    @classmethod
-    def resource_setup(cls):
-        if (not CONF.service_available.neutron):
-            msg = "Skipping all Neutron cli tests because it is not available"
-            raise cls.skipException(msg)
-        super(SimpleReadOnlyNeutronClientTest, cls).resource_setup()
-
-    def neutron(self, *args, **kwargs):
-        return self.clients.neutron(*args,
-                                    endpoint_type=CONF.network.endpoint_type,
-                                    **kwargs)
-
-    @test.attr(type='smoke')
-    @test.idempotent_id('84dd7190-2b98-4709-8e2c-3c1d25b9e7d2')
-    def test_neutron_fake_action(self):
-        self.assertRaises(exceptions.CommandFailed,
-                          self.neutron,
-                          'this-does-not-exist')
-
-    @test.attr(type='smoke')
-    @test.idempotent_id('c598c337-313a-45ac-bf27-d6b4124a9e5b')
-    def test_neutron_net_list(self):
-        net_list = self.parser.listing(self.neutron('net-list'))
-        self.assertTableStruct(net_list, ['id', 'name', 'subnets'])
-
-    @test.attr(type='smoke')
-    @test.idempotent_id('3e172b04-2e3b-4fcf-922d-99d5c803779f')
-    def test_neutron_ext_list(self):
-        ext = self.parser.listing(self.neutron('ext-list'))
-        self.assertTableStruct(ext, ['alias', 'name'])
-
-    @test.attr(type='smoke')
-    @test.idempotent_id('2e0de814-52d6-4f81-be17-fe327072fc23')
-    @test.requires_ext(extension='dhcp_agent_scheduler', service='network')
-    def test_neutron_dhcp_agent_list_hosting_net(self):
-        self.neutron('dhcp-agent-list-hosting-net',
-                     params=CONF.compute.fixed_network_name)
-
-    @test.attr(type='smoke')
-    @test.idempotent_id('8524a24a-3895-40a5-8c9d-49d4459cdda4')
-    @test.requires_ext(extension='agent', service='network')
-    def test_neutron_agent_list(self):
-        agents = self.parser.listing(self.neutron('agent-list'))
-        field_names = ['id', 'agent_type', 'host', 'alive', 'admin_state_up']
-        self.assertTableStruct(agents, field_names)
-
-    @test.attr(type='smoke')
-    @test.idempotent_id('97c3ef92-7303-45f1-80db-b6622f176782')
-    @test.requires_ext(extension='router', service='network')
-    def test_neutron_floatingip_list(self):
-        self.neutron('floatingip-list')
-
-    @test.attr(type='smoke')
-    @test.idempotent_id('823e0fee-404c-49a7-8bf3-d2f0383cc649')
-    @test.requires_ext(extension='metering', service='network')
-    def test_neutron_meter_label_list(self):
-        self.neutron('meter-label-list')
-
-    @test.attr(type='smoke')
-    @test.idempotent_id('7fb76098-01f6-417f-b9c7-e630ba3f394b')
-    @test.requires_ext(extension='metering', service='network')
-    def test_neutron_meter_label_rule_list(self):
-        self.neutron('meter-label-rule-list')
-
-    @test.requires_ext(extension='lbaas_agent_scheduler', service='network')
-    def _test_neutron_lbaas_command(self, command):
-        try:
-            self.neutron(command)
-        except exceptions.CommandFailed as e:
-            if '404 Not Found' not in e.stderr:
-                self.fail('%s: Unexpected failure.' % command)
-
-    @test.attr(type='smoke')
-    @test.idempotent_id('396d1d87-fd0c-4716-9ff0-f1baa54c6c61')
-    def test_neutron_lb_healthmonitor_list(self):
-        self._test_neutron_lbaas_command('lb-healthmonitor-list')
-
-    @test.attr(type='smoke')
-    @test.idempotent_id('f41fa54d-5cd8-4f2c-bb4e-13abc72dccb6')
-    def test_neutron_lb_member_list(self):
-        self._test_neutron_lbaas_command('lb-member-list')
-
-    @test.attr(type='smoke')
-    @test.idempotent_id('3ec04885-7573-4cce-b086-5722c0b00d85')
-    def test_neutron_lb_pool_list(self):
-        self._test_neutron_lbaas_command('lb-pool-list')
-
-    @test.attr(type='smoke')
-    @test.idempotent_id('1ab530e0-ec87-498f-baf2-85f6635a2ad9')
-    def test_neutron_lb_vip_list(self):
-        self._test_neutron_lbaas_command('lb-vip-list')
-
-    @test.attr(type='smoke')
-    @test.idempotent_id('e92f7362-4009-4b37-afee-f469105b24e7')
-    @test.requires_ext(extension='external-net', service='network')
-    def test_neutron_net_external_list(self):
-        net_ext_list = self.parser.listing(self.neutron('net-external-list'))
-        self.assertTableStruct(net_ext_list, ['id', 'name', 'subnets'])
-
-    @test.attr(type='smoke')
-    @test.idempotent_id('ed840980-7c84-4b6e-b280-f13c5848a0e9')
-    def test_neutron_port_list(self):
-        port_list = self.parser.listing(self.neutron('port-list'))
-        self.assertTableStruct(port_list, ['id', 'name', 'mac_address',
-                                           'fixed_ips'])
-
-    @test.attr(type='smoke')
-    @test.idempotent_id('dded0dfa-f2ac-4c1f-bc90-69fd06dd7132')
-    @test.requires_ext(extension='quotas', service='network')
-    def test_neutron_quota_list(self):
-        self.neutron('quota-list')
-
-    @test.attr(type='smoke')
-    @test.idempotent_id('927fca1e-4397-42a2-ba47-d738299466de')
-    @test.requires_ext(extension='router', service='network')
-    def test_neutron_router_list(self):
-        router_list = self.parser.listing(self.neutron('router-list'))
-        self.assertTableStruct(router_list, ['id', 'name',
-                                             'external_gateway_info'])
-
-    @test.attr(type='smoke')
-    @test.idempotent_id('e2e3d2d5-1aee-499d-84d9-37382dcf26ff')
-    @test.requires_ext(extension='security-group', service='network')
-    def test_neutron_security_group_list(self):
-        security_grp = self.parser.listing(self.neutron('security-group-list'))
-        self.assertTableStruct(security_grp, ['id', 'name', 'description'])
-
-    @test.attr(type='smoke')
-    @test.idempotent_id('288602c2-8b59-44cd-8c5d-1ec916a114d3')
-    @test.requires_ext(extension='security-group', service='network')
-    def test_neutron_security_group_rule_list(self):
-        security_grp = self.parser.listing(self.neutron
-                                           ('security-group-rule-list'))
-        self.assertTableStruct(security_grp, ['id', 'security_group',
-                                              'direction', 'protocol',
-                                              'remote_ip_prefix',
-                                              'remote_group'])
-
-    @test.attr(type='smoke')
-    @test.idempotent_id('2a874a08-b9c9-4f0f-82ef-8cadb15bbd5d')
-    def test_neutron_subnet_list(self):
-        subnet_list = self.parser.listing(self.neutron('subnet-list'))
-        self.assertTableStruct(subnet_list, ['id', 'name', 'cidr',
-                                             'allocation_pools'])
-
-    @test.attr(type='smoke')
-    @test.idempotent_id('048e1ec3-cf6c-4066-b262-2028e03ce825')
-    @test.requires_ext(extension='vpnaas', service='network')
-    def test_neutron_vpn_ikepolicy_list(self):
-        ikepolicy = self.parser.listing(self.neutron('vpn-ikepolicy-list'))
-        self.assertTableStruct(ikepolicy, ['id', 'name',
-                                           'auth_algorithm',
-                                           'encryption_algorithm',
-                                           'ike_version', 'pfs'])
-
-    @test.attr(type='smoke')
-    @test.idempotent_id('bb8902b7-b2e6-49fd-b9bd-a26dd99732df')
-    @test.requires_ext(extension='vpnaas', service='network')
-    def test_neutron_vpn_ipsecpolicy_list(self):
-        ipsecpolicy = self.parser.listing(self.neutron('vpn-ipsecpolicy-list'))
-        self.assertTableStruct(ipsecpolicy, ['id', 'name',
-                                             'auth_algorithm',
-                                             'encryption_algorithm',
-                                             'pfs'])
-
-    @test.attr(type='smoke')
-    @test.idempotent_id('c0f33f9a-0ba9-4177-bcd5-dce34b81d523')
-    @test.requires_ext(extension='vpnaas', service='network')
-    def test_neutron_vpn_service_list(self):
-        vpn_list = self.parser.listing(self.neutron('vpn-service-list'))
-        self.assertTableStruct(vpn_list, ['id', 'name',
-                                          'router_id', 'status'])
-
-    @test.attr(type='smoke')
-    @test.idempotent_id('bb142f8a-e568-405f-b1b7-4cb458de7971')
-    @test.requires_ext(extension='vpnaas', service='network')
-    def test_neutron_ipsec_site_connection_list(self):
-        ipsec_site = self.parser.listing(self.neutron
-                                         ('ipsec-site-connection-list'))
-        self.assertTableStruct(ipsec_site, ['id', 'name',
-                                            'peer_address',
-                                            'peer_cidrs',
-                                            'route_mode',
-                                            'auth_mode', 'status'])
-
-    @test.attr(type='smoke')
-    @test.idempotent_id('89baff14-8cb7-4ad8-9c24-b0278711170b')
-    @test.requires_ext(extension='fwaas', service='network')
-    def test_neutron_firewall_list(self):
-        firewall_list = self.parser.listing(self.neutron
-                                            ('firewall-list'))
-        self.assertTableStruct(firewall_list, ['id', 'name',
-                                               'firewall_policy_id'])
-
-    @test.attr(type='smoke')
-    @test.idempotent_id('996e418a-2a51-4018-9602-478ca8053e61')
-    @test.requires_ext(extension='fwaas', service='network')
-    def test_neutron_firewall_policy_list(self):
-        firewall_policy = self.parser.listing(self.neutron
-                                              ('firewall-policy-list'))
-        self.assertTableStruct(firewall_policy, ['id', 'name',
-                                                 'firewall_rules'])
-
-    @test.attr(type='smoke')
-    @test.idempotent_id('d4638dd6-98d4-4400-a920-26572de1a6fc')
-    @test.requires_ext(extension='fwaas', service='network')
-    def test_neutron_firewall_rule_list(self):
-        firewall_rule = self.parser.listing(self.neutron
-                                            ('firewall-rule-list'))
-        self.assertTableStruct(firewall_rule, ['id', 'name',
-                                               'firewall_policy_id',
-                                               'summary', 'enabled'])
-
-    @test.attr(type='smoke')
-    @test.idempotent_id('1c4551e1-e3f3-4af2-8a40-c3f551e4a536')
-    def test_neutron_help(self):
-        help_text = self.neutron('help')
-        lines = help_text.split('\n')
-        self.assertFirstLineStartsWith(lines, 'usage: neutron')
-
-        commands = []
-        cmds_start = lines.index('Commands for API v2.0:')
-        command_pattern = re.compile('^ {2}([a-z0-9\-\_]+)')
-        for line in lines[cmds_start:]:
-            match = command_pattern.match(line)
-            if match:
-                commands.append(match.group(1))
-        commands = set(commands)
-        wanted_commands = set(('net-create', 'subnet-list', 'port-delete',
-                               'router-show', 'agent-update', 'help'))
-        self.assertFalse(wanted_commands - commands)
-
-    # Optional arguments:
-
-    @test.attr(type='smoke')
-    @test.idempotent_id('381e6fe3-cddc-47c9-a773-70ddb2f79a91')
-    def test_neutron_version(self):
-        self.neutron('', flags='--version')
-
-    @test.attr(type='smoke')
-    @test.idempotent_id('bcad0e07-da8c-4c7c-8ab6-499e5d7ab8cb')
-    def test_neutron_debug_net_list(self):
-        self.neutron('net-list', flags='--debug')
-
-    @test.attr(type='smoke')
-    @test.idempotent_id('3e42d78e-65e5-4e8f-8c29-ca7be8feebb4')
-    def test_neutron_quiet_net_list(self):
-        self.neutron('net-list', flags='--quiet')
diff --git a/tempest/services/baremetal/v1/json/baremetal_client.py b/tempest/services/baremetal/v1/json/baremetal_client.py
index 09b6cd1..0c319f6 100644
--- a/tempest/services/baremetal/v1/json/baremetal_client.py
+++ b/tempest/services/baremetal/v1/json/baremetal_client.py
@@ -131,7 +131,7 @@
         return self._show_request('drivers', driver_name)
 
     @base.handle_errors
-    def create_node(self, chassis_id, **kwargs):
+    def create_node(self, chassis_id=None, **kwargs):
         """
         Create a baremetal node with the specified parameters.
 
diff --git a/tempest/services/identity/v3/json/token_client.py b/tempest/services/identity/v3/json/token_client.py
index b0824a7..3e37403 100644
--- a/tempest/services/identity/v3/json/token_client.py
+++ b/tempest/services/identity/v3/json/token_client.py
@@ -37,22 +37,30 @@
 
         self.auth_url = auth_url
 
-    def auth(self, user=None, password=None, project=None, user_type='id',
-             user_domain=None, project_domain=None, token=None):
+    def auth(self, user_id=None, username=None, password=None, project_id=None,
+             project_name=None, user_domain_id=None, user_domain_name=None,
+             project_domain_id=None, project_domain_name=None, domain_id=None,
+             domain_name=None, token=None):
         """
-        :param user: user id or name, as specified in user_type
-        :param user_domain: the user domain
-        :param project_domain: the project domain
+        :param user_id: user id
+        :param username: user name
+        :param user_domain_id: the user domain id
+        :param user_domain_name: the user domain name
+        :param project_domain_id: the project domain id
+        :param project_domain_name: the project domain name
+        :param domain_id: a domain id to scope to
+        :param domain_name: a domain name to scope to
+        :param project_id: a project id to scope to
+        :param project_name: a project name to scope to
         :param token: a token to re-scope.
 
-        Accepts different combinations of credentials. Restrictions:
-        - project and domain are only name (no id)
+        Accepts different combinations of credentials.
         Sample sample valid combinations:
         - token
-        - token, project, project_domain
+        - token, project_name, project_domain_id
         - user_id, password
-        - username, password, user_domain
-        - username, password, project, user_domain, project_domain
+        - username, password, user_domain_id
+        - username, password, project_name, user_domain_id, project_domain_id
         Validation is left to the server side.
         """
         creds = {
@@ -68,25 +76,45 @@
             id_obj['token'] = {
                 'id': token
             }
-        if user and password:
+
+        if (user_id or username) and password:
             id_obj['methods'].append('password')
             id_obj['password'] = {
                 'user': {
                     'password': password,
                 }
             }
-            if user_type == 'id':
-                id_obj['password']['user']['id'] = user
+            if user_id:
+                id_obj['password']['user']['id'] = user_id
             else:
-                id_obj['password']['user']['name'] = user
-            if user_domain is not None:
-                _domain = dict(name=user_domain)
+                id_obj['password']['user']['name'] = username
+
+            _domain = None
+            if user_domain_id is not None:
+                _domain = dict(id=user_domain_id)
+            elif user_domain_name is not None:
+                _domain = dict(name=user_domain_name)
+            if _domain:
                 id_obj['password']['user']['domain'] = _domain
-        if project is not None:
-            _domain = dict(name=project_domain)
-            _project = dict(name=project, domain=_domain)
-            scope = dict(project=_project)
-            creds['auth']['scope'] = scope
+
+        if (project_id or project_name):
+            _project = dict()
+
+            if project_id:
+                _project['id'] = project_id
+            elif project_name:
+                _project['name'] = project_name
+
+                if project_domain_id is not None:
+                    _project['domain'] = {'id': project_domain_id}
+                elif project_domain_name is not None:
+                    _project['domain'] = {'name': project_domain_name}
+
+            creds['auth']['scope'] = dict(project=_project)
+        elif domain_id:
+            creds['auth']['scope'] = dict(domain={'id': domain_id})
+        elif domain_name:
+            creds['auth']['scope'] = dict(domain={'name': domain_name})
 
         body = json.dumps(creds)
         resp, body = self.post(self.auth_url, body=body)
@@ -120,15 +148,22 @@
 
         return resp, json.loads(resp_body)
 
-    def get_token(self, user, password, project=None, project_domain='Default',
-                  user_domain='Default', auth_data=False):
+    def get_token(self, **kwargs):
         """
-        :param user: username
         Returns (token id, token data) for supplied credentials
         """
-        body = self.auth(user, password, project, user_type='name',
-                         user_domain=user_domain,
-                         project_domain=project_domain)
+
+        auth_data = kwargs.pop('auth_data', False)
+
+        if not (kwargs.get('user_domain_id') or
+                kwargs.get('user_domain_name')):
+            kwargs['user_domain_name'] = 'Default'
+
+        if not (kwargs.get('project_domain_id') or
+                kwargs.get('project_domain_name')):
+            kwargs['project_domain_name'] = 'Default'
+
+        body = self.auth(**kwargs)
 
         token = body.response.get('x-subject-token')
         if auth_data:
diff --git a/tempest/tests/fake_credentials.py b/tempest/tests/fake_credentials.py
index 48f67d2..649d51d 100644
--- a/tempest/tests/fake_credentials.py
+++ b/tempest/tests/fake_credentials.py
@@ -43,7 +43,8 @@
             username='fake_username',
             password='fake_password',
             user_domain_name='fake_domain_name',
-            project_name='fake_tenant_name'
+            project_name='fake_tenant_name',
+            project_domain_name='fake_domain_name'
         )
         super(FakeKeystoneV3Credentials, self).__init__(**creds)
 
diff --git a/tempest/thirdparty/boto/test.py b/tempest/thirdparty/boto/test.py
index 043b230..90d0838 100644
--- a/tempest/thirdparty/boto/test.py
+++ b/tempest/thirdparty/boto/test.py
@@ -203,6 +203,9 @@
         super(BotoTestCase, cls).skip_checks()
         if not CONF.compute_feature_enabled.ec2_api:
             raise cls.skipException("The EC2 API is not available")
+        if not CONF.identity_feature_enabled.api_v2 or \
+                not CONF.identity.auth_version == 'v2':
+            raise cls.skipException("Identity v2 is not available")
 
     @classmethod
     def setup_credentials(cls):