diff --git a/.zuul.yaml b/.zuul.yaml
index cdc63a7..85bf1bb 100644
--- a/.zuul.yaml
+++ b/.zuul.yaml
@@ -7,12 +7,12 @@
       This Tempest job provides the base for both the single and multi-node
       test setup. To run a multi-node test inherit from devstack-tempest and
       set the nodeset to a multi-node one.
-    required-projects:
+    required-projects: &base_required-projects
       - opendev.org/openstack/tempest
     timeout: 7200
-    roles:
+    roles: &base_roles
       - zuul: opendev.org/openstack/devstack
-    vars:
+    vars: &base_vars
       devstack_services:
         tempest: true
       devstack_local_conf:
@@ -53,37 +53,37 @@
     name: devstack-tempest-ipv6
     parent: devstack-ipv6
     description: |
-      Base Tempest IPv6 job.
-    required-projects:
-      - opendev.org/openstack/tempest
+      Base Tempest IPv6 job. This job is derived from 'devstack-ipv6'
+      which set the IPv6-only setting for OpenStack services. As part of
+      run phase, this job will verify the IPv6 setting and check the services
+      endpoints and listen addresses are IPv6. Basically it will run the script
+      ./tool/verify-ipv6-only-deployments.sh
+
+      Child jobs of this job can run their own set of tests and can
+      add post-run playebooks to extend the IPv6 verification specific
+      to their deployed services.
+      Check the wiki page for more details about project jobs setup
+      - https://wiki.openstack.org/wiki/Goal-IPv6-only-deployments-and-testing
+    required-projects: *base_required-projects
     timeout: 7200
-    roles:
-      - zuul: opendev.org/openstack/devstack
-    vars:
-      devstack_services:
-        tempest: true
-      devstack_local_conf:
-        test-config:
-          $TEMPEST_CONFIG:
-            compute:
-              min_compute_nodes: "{{ groups['compute'] | default(['controller']) | length }}"
-      test_results_stage_name: test_results
-      zuul_copy_output:
-        '{{ devstack_base_dir }}/tempest/etc/tempest.conf': logs
-        '{{ devstack_base_dir }}/tempest/etc/accounts.yaml': logs
-        '{{ devstack_base_dir }}/tempest/tempest.log': logs
-        '{{ stage_dir }}/{{ test_results_stage_name }}.subunit': logs
-        '{{ stage_dir }}/{{ test_results_stage_name }}.html': logs
-        '{{ stage_dir }}/stackviz': logs
-      extensions_to_txt:
-        conf: true
-        log: true
-        yaml: true
-        yml: true
-    run: playbooks/devstack-tempest.yaml
+    roles: *base_roles
+    vars: *base_vars
+    run: playbooks/devstack-tempest-ipv6.yaml
     post-run: playbooks/post-tempest.yaml
 
 - job:
+    name: tempest-ipv6-only
+    parent: devstack-tempest-ipv6
+    # This currently works from stable/pike on.
+    branches: ^(?!stable/ocata).*$
+    description: |
+      Integration test of IPv6-only deployments. This job runs
+      smoke and IPv6 relates tests only. Basic idea is to test
+      whether OpenStack Services listen on IPv6 addrress or not.
+    vars:
+      tox_envlist: ipv6-only
+
+- job:
     name: tempest-full
     parent: devstack-tempest
     # This currently works from stable/pike on.
@@ -729,7 +729,7 @@
         - tempest-multinode-full-py3:
             irrelevant-files: *tempest-irrelevant-files
         - tempest-tox-plugin-sanity-check:
-            irrelevant-files:
+            irrelevant-files: &tempest-irrelevant-files-2
               - ^.*\.rst$
               - ^doc/.*$
               - ^etc/.*$
@@ -738,6 +738,8 @@
               - ^tempest/hacking/.*$
               - ^tempest/tests/.*$
               # tools/ is not here since this relies on a script in tools/.
+        - tempest-ipv6-only:
+            irrelevant-files: *tempest-irrelevant-files-2
         - tempest-slow:
             irrelevant-files: *tempest-irrelevant-files
         - tempest-slow-py3:
@@ -790,6 +792,8 @@
             irrelevant-files: *tempest-irrelevant-files
         - grenade-py3:
             irrelevant-files: *tempest-irrelevant-files
+        - tempest-ipv6-only:
+            irrelevant-files: *tempest-irrelevant-files-2
     experimental:
       jobs:
         - tempest-cinder-v2-api:
diff --git a/playbooks/devstack-tempest-ipv6.yaml b/playbooks/devstack-tempest-ipv6.yaml
new file mode 100644
index 0000000..5f72345
--- /dev/null
+++ b/playbooks/devstack-tempest-ipv6.yaml
@@ -0,0 +1,24 @@
+# Changes that run through devstack-tempest-ipv6 are likely to have an impact on
+# the devstack part of the job, so we keep devstack in the main play to
+# avoid zuul retrying on legitimate failures.
+- hosts: all
+  roles:
+    - orchestrate-devstack
+
+# We run tests only on one node, regardless how many nodes are in the system
+- hosts: tempest
+  environment:
+    # This enviroment variable is used by the optional tempest-gabbi
+    # job provided by the gabbi-tempest plugin. It can be safely ignored
+    # if that plugin is not being used.
+    GABBI_TEMPEST_PATH: "{{ gabbi_tempest_path | default('') }}"
+  roles:
+    - setup-tempest-run-dir
+    - setup-tempest-data-dir
+    - acl-devstack-files
+    # Verify the IPv6-only deployments. This role will perform check for
+    # IPv6 only env for example Devstack IPv6 settings and services listen
+    # address is IPv6 etc. This is invoked before tests are run so that we can
+    # fail early if anything missing the IPv6 settings or deployments.
+    - ipv6-only-deployments-verification
+    - run-tempest
diff --git a/roles/ipv6-only-deployments-verification/README.rst b/roles/ipv6-only-deployments-verification/README.rst
new file mode 100644
index 0000000..400a8da
--- /dev/null
+++ b/roles/ipv6-only-deployments-verification/README.rst
@@ -0,0 +1,16 @@
+Verify the IPv6-only deployments
+
+This role needs to be invoked from a playbook that
+run tests. This role verifies the IPv6 setting on
+devstack side and devstack deploy services on IPv6.
+This role is invoked before tests are run so that
+if any missing IPv6 setting or deployments can fail
+the job early.
+
+
+**Role Variables**
+
+.. zuul:rolevar:: devstack_base_dir
+   :default: /opt/stack
+
+   The devstack base directory.
diff --git a/roles/ipv6-only-deployments-verification/defaults/main.yaml b/roles/ipv6-only-deployments-verification/defaults/main.yaml
new file mode 100644
index 0000000..fea05c8
--- /dev/null
+++ b/roles/ipv6-only-deployments-verification/defaults/main.yaml
@@ -0,0 +1 @@
+devstack_base_dir: /opt/stack
diff --git a/roles/ipv6-only-deployments-verification/tasks/main.yaml b/roles/ipv6-only-deployments-verification/tasks/main.yaml
new file mode 100644
index 0000000..d73c79c
--- /dev/null
+++ b/roles/ipv6-only-deployments-verification/tasks/main.yaml
@@ -0,0 +1,4 @@
+- name: Verify the ipv6-only deployments
+  become: true
+  become_user: stack
+  shell: "{{ devstack_base_dir }}/tempest/tools/verify-ipv6-only-deployments.sh"
diff --git a/tools/verify-ipv6-only-deployments.sh b/tools/verify-ipv6-only-deployments.sh
new file mode 100755
index 0000000..90807a3
--- /dev/null
+++ b/tools/verify-ipv6-only-deployments.sh
@@ -0,0 +1,86 @@
+#!/bin/bash
+#
+#
+# NOTE(gmann): This script is used in 'devstack-tempest-ipv6' zuul job to verify that
+# services are deployed on IPv6 properly or not. This will capture if any devstck or devstack
+# plugins are missing the required setting to listen on IPv6 address. This is run as part of
+# run phase of zuul job and before test run. Child job of 'devstack-tempest-ipv6'
+# can expand the IPv6 verification specific to project by defining the new post-run script which
+# will run along with this base script.
+# If there are more common verification for IPv6 then we can always extent this script.
+
+# Keep track of the DevStack directory
+TOP_DIR=$(cd $(dirname "$0")/../../devstack && pwd)
+source $TOP_DIR/stackrc
+source $TOP_DIR/openrc admin admin
+
+function verify_devstack_ipv6_setting {
+    local _service_host=$(echo $SERVICE_HOST | tr -d [])
+    local _host_ipv6=$(echo $HOST_IPV6 | tr -d [])
+    local _service_listen_address=$(echo $SERVICE_LISTEN_ADDRESS | tr -d [])
+    local _service_local_host=$(echo $SERVICE_LOCAL_HOST | tr -d [])
+    if [[ "$SERVICE_IP_VERSION" != 6 ]]; then
+        echo $SERVICE_IP_VERSION "SERVICE_IP_VERSION is not set to 6 which is must for devstack to deploy services with IPv6 address."
+        exit 1
+    fi
+    is_service_host_ipv6=$(python3 -c 'import oslo_utils.netutils as nutils; print(nutils.is_valid_ipv6("'$_service_host'"))')
+    if [[ "$is_service_host_ipv6" != "True" ]]; then
+        echo $SERVICE_HOST "SERVICE_HOST is not ipv6 which means devstack cannot deploy services on IPv6 address."
+        exit 1
+    fi
+    is_host_ipv6=$(python3 -c 'import oslo_utils.netutils as nutils; print(nutils.is_valid_ipv6("'$_host_ipv6'"))')
+    if [[ "$is_host_ipv6" != "True" ]]; then
+        echo $HOST_IPV6 "HOST_IPV6 is not ipv6 which means devstack cannot deploy services on IPv6 address."
+        exit 1
+    fi
+    is_service_listen_address=$(python3 -c 'import oslo_utils.netutils as nutils; print(nutils.is_valid_ipv6("'$_service_listen_address'"))')
+    if [[ "$is_service_listen_address" != "True" ]]; then
+        echo $SERVICE_LISTEN_ADDRESS "SERVICE_LISTEN_ADDRESS is not ipv6 which means devstack cannot deploy services on IPv6 address."
+        exit 1
+    fi
+    is_service_local_host=$(python3 -c 'import oslo_utils.netutils as nutils; print(nutils.is_valid_ipv6("'$_service_local_host'"))')
+    if [[ "$is_service_local_host" != "True" ]]; then
+        echo $SERVICE_LOCAL_HOST "SERVICE_LOCAL_HOST is not ipv6 which means devstack cannot deploy services on IPv6 address."
+        exit 1
+    fi
+    echo "Devstack is properly configured with IPv6"
+    echo "SERVICE_IP_VERSION: " $SERVICE_IP_VERSION "HOST_IPV6: " $HOST_IPV6 "SERVICE_HOST: " $SERVICE_HOST "SERVICE_LISTEN_ADDRESS: " $SERVICE_LISTEN_ADDRESS "SERVICE_LOCAL_HOST: " $SERVICE_LOCAL_HOST
+}
+
+function sanity_check_system_ipv6_enabled {
+    system_ipv6_enabled=$(python3 -c 'import oslo_utils.netutils as nutils; print(nutils.is_ipv6_enabled())')
+    if [[ $system_ipv6_enabled != "True" ]]; then
+        echo "IPv6 is disabled in system"
+        exit 1
+    fi
+    echo "IPv6 is enabled in system"
+}
+
+function verify_service_listen_address_is_ipv6 {
+    local endpoints_verified=False
+    local all_ipv6=True
+    endpoints=$(openstack endpoint list -f value -c URL)
+    for endpoint in ${endpoints}; do
+        local endpoint_address=$(echo "$endpoint" | awk -F/ '{print $3}' | awk -F] '{print $1}')
+        endpoint_address=$(echo $endpoint_address | tr -d [])
+        local is_endpoint_ipv6=$(python3 -c 'import oslo_utils.netutils as nutils; print(nutils.is_valid_ipv6("'$endpoint_address'"))')
+        if [[ "$is_endpoint_ipv6" != "True" ]]; then
+            all_ipv6=False
+            echo $endpoint ": This is not ipv6 endpoint which means corresponding service is not listening on IPv6 address."
+            continue
+        fi
+        endpoints_verified=True
+    done
+    if [[ "$all_ipv6" == "False"  ]] || [[ "$endpoints_verified" == "False" ]]; then
+        exit 1
+    fi
+    echo "All services deployed by devstack is on IPv6 endpoints"
+    echo $endpoints
+}
+
+#First thing to verify if system has IPv6 enabled or not
+sanity_check_system_ipv6_enabled
+#Verify whether devstack is configured properly with IPv6 setting
+verify_devstack_ipv6_setting
+#Get all registrfed endpoints by devstack in keystone and verify that each endpoints address is IPv6.
+verify_service_listen_address_is_ipv6
diff --git a/tox.ini b/tox.ini
index 8a7a509..53d7355 100644
--- a/tox.ini
+++ b/tox.ini
@@ -231,6 +231,18 @@
     find . -type f -name "*.pyc" -delete
     tempest run --serial --regex '\[.*\bslow\b.*\]' {posargs}
 
+[testenv:ipv6-only]
+envdir = .tox/tempest
+sitepackages = {[tempestenv]sitepackages}
+setenv = {[tempestenv]setenv}
+deps = {[tempestenv]deps}
+# Run only smoke and ipv6 tests. This env is used to tests
+# the ipv6 deployments and basic tests run fine so that we can
+# verify that services listen on IPv6 address.
+commands =
+    find . -type f -name "*.pyc" -delete
+    tempest run --regex '\[.*\bsmoke|ipv6|test_network_v6\b.*\]' {posargs}
+
 [testenv:venv]
 deps =
   -c{env:UPPER_CONSTRAINTS_FILE:https://releases.openstack.org/constraints/upper/master}