# vim: tabstop=4 shiftwidth=4 softtabstop=4

# Copyright 2012 OpenStack Foundation
# All Rights Reserved.
#
#    Licensed under the Apache License, Version 2.0 (the "License"); you may
#    not use this file except in compliance with the License. You may obtain
#    a copy of the License at
#
#         http://www.apache.org/licenses/LICENSE-2.0
#
#    Unless required by applicable law or agreed to in writing, software
#    distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
#    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
#    License for the specific language governing permissions and limitations
#    under the License.

import atexit
import os
import time

import fixtures
import nose.plugins.attrib
import testresources
import testtools

from tempest import clients
from tempest import config
from tempest import exceptions
from tempest.openstack.common import log as logging

LOG = logging.getLogger(__name__)

# All the successful HTTP status codes from RFC 2616
HTTP_SUCCESS = (200, 201, 202, 203, 204, 205, 206)


def attr(*args, **kwargs):
    """A decorator which applies the nose and testtools attr decorator

    This decorator applies the nose attr decorator as well as the
    the testtools.testcase.attr if it is in the list of attributes
    to testtools we want to apply.
    """

    def decorator(f):
        if 'type' in kwargs and isinstance(kwargs['type'], str):
            f = testtools.testcase.attr(kwargs['type'])(f)
            if kwargs['type'] == 'smoke':
                f = testtools.testcase.attr('gate')(f)
        elif 'type' in kwargs and isinstance(kwargs['type'], list):
            for attr in kwargs['type']:
                f = testtools.testcase.attr(attr)(f)
                if attr == 'smoke':
                    f = testtools.testcase.attr('gate')(f)
        return nose.plugins.attrib.attr(*args, **kwargs)(f)

    return decorator


def services(*args, **kwargs):
    """A decorator used to set an attr for each service used in a test case

    This decorator applies a testtools attr for each service that gets
    exercised by a test case.
    """
    valid_service_list = ['compute', 'image', 'volume', 'orchestration',
                          'network', 'identity', 'object', 'dashboard']

    def decorator(f):
        for service in args:
            if service not in valid_service_list:
                raise exceptions.InvalidServiceTag('%s is not a valid service'
                                                   % service)
        attr(type=list(args))(f)
        return f
    return decorator


def stresstest(*args, **kwargs):
    """Add stress test decorator

    For all functions with this decorator a attr stress will be
    set automatically.

    @param class_setup_per: allowed values are application, process, action
           ``application``: once in the stress job lifetime
           ``process``: once in the worker process lifetime
           ``action``: on each action
    @param allow_inheritance: allows inheritance of this attribute
    """
    def decorator(f):
        if 'class_setup_per' in kwargs:
            setattr(f, "st_class_setup_per", kwargs['class_setup_per'])
        else:
            setattr(f, "st_class_setup_per", 'process')
        if 'allow_inheritance' in kwargs:
            setattr(f, "st_allow_inheritance", kwargs['allow_inheritance'])
        else:
            setattr(f, "st_allow_inheritance", False)
        attr(type='stress')(f)
        return f
    return decorator


# there is a mis-match between nose and testtools for older pythons.
# testtools will set skipException to be either
# unittest.case.SkipTest, unittest2.case.SkipTest or an internal skip
# exception, depending on what it can find. Python <2.7 doesn't have
# unittest.case.SkipTest; so if unittest2 is not installed it falls
# back to the internal class.
#
# The current nose skip plugin will decide to raise either
# unittest.case.SkipTest or its own internal exception; it does not
# look for unittest2 or the internal unittest exception.  Thus we must
# monkey-patch testtools.TestCase.skipException to be the exception
# the nose skip plugin expects.
#
# However, with the switch to testr nose may not be available, so we
# require you to opt-in to this fix with an environment variable.
#
# This is temporary until upstream nose starts looking for unittest2
# as testtools does; we can then remove this and ensure unittest2 is
# available for older pythons; then nose and testtools will agree
# unittest2.case.SkipTest is the one-true skip test exception.
#
#   https://review.openstack.org/#/c/33056
#   https://github.com/nose-devs/nose/pull/699
if 'TEMPEST_PY26_NOSE_COMPAT' in os.environ:
    try:
        import unittest.case.SkipTest
        # convince pep8 we're using the import...
        if unittest.case.SkipTest:
            pass
        raise RuntimeError("You have unittest.case.SkipTest; "
                           "no need to override")
    except ImportError:
        LOG.info("Overriding skipException to nose SkipTest")
        testtools.TestCase.skipException = nose.plugins.skip.SkipTest

at_exit_set = set()


def validate_tearDownClass():
    if at_exit_set:
        raise RuntimeError("tearDownClass does not calls the super's "
                           "tearDownClass in these classes: "
                           + str(at_exit_set))

atexit.register(validate_tearDownClass)


class BaseTestCase(testtools.TestCase,
                   testtools.testcase.WithAttributes,
                   testresources.ResourcedTestCase):

    config = config.TempestConfig()

    setUpClassCalled = False

    @classmethod
    def setUpClass(cls):
        if hasattr(super(BaseTestCase, cls), 'setUpClass'):
            super(BaseTestCase, cls).setUpClass()
        cls.setUpClassCalled = True

    @classmethod
    def tearDownClass(cls):
        at_exit_set.discard(cls)
        if hasattr(super(BaseTestCase, cls), 'tearDownClass'):
            super(BaseTestCase, cls).tearDownClass()

    def setUp(self):
        super(BaseTestCase, self).setUp()
        if not self.setUpClassCalled:
            raise RuntimeError("setUpClass does not calls the super's"
                               "setUpClass in the "
                               + self.__class__.__name__)
        at_exit_set.add(self.__class__)
        test_timeout = os.environ.get('OS_TEST_TIMEOUT', 0)
        try:
            test_timeout = int(test_timeout)
        except ValueError:
            test_timeout = 0
        if test_timeout > 0:
            self.useFixture(fixtures.Timeout(test_timeout, gentle=True))

        if (os.environ.get('OS_STDOUT_CAPTURE') == 'True' or
                os.environ.get('OS_STDOUT_CAPTURE') == '1'):
            stdout = self.useFixture(fixtures.StringStream('stdout')).stream
            self.useFixture(fixtures.MonkeyPatch('sys.stdout', stdout))
        if (os.environ.get('OS_STDERR_CAPTURE') == 'True' or
                os.environ.get('OS_STDERR_CAPTURE') == '1'):
            stderr = self.useFixture(fixtures.StringStream('stderr')).stream
            self.useFixture(fixtures.MonkeyPatch('sys.stderr', stderr))
        if (os.environ.get('OS_LOG_CAPTURE') != 'False' and
            os.environ.get('OS_LOG_CAPTURE') != '0'):
            log_format = '%(asctime)-15s %(message)s'
            self.useFixture(fixtures.LoggerFixture(nuke_handlers=False,
                                                   format=log_format))

    @classmethod
    def _get_identity_admin_client(cls):
        """
        Returns an instance of the Identity Admin API client
        """
        os = clients.AdminManager(interface=cls._interface)
        admin_client = os.identity_client
        return admin_client

    @classmethod
    def _get_client_args(cls):

        return (
            cls.config,
            cls.config.identity.admin_username,
            cls.config.identity.admin_password,
            cls.config.identity.uri
        )


def call_until_true(func, duration, sleep_for):
    """
    Call the given function until it returns True (and return True) or
    until the specified duration (in seconds) elapses (and return
    False).

    :param func: A zero argument callable that returns True on success.
    :param duration: The number of seconds for which to attempt a
        successful call of the function.
    :param sleep_for: The number of seconds to sleep after an unsuccessful
                      invocation of the function.
    """
    now = time.time()
    timeout = now + duration
    while now < timeout:
        if func():
            return True
        LOG.debug("Sleeping for %d seconds", sleep_for)
        time.sleep(sleep_for)
        now = time.time()
    return False