releasenotes/source/conf.py - packaging/sources/patrole - Gitiles

 # -*- coding: utf-8 -*-
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at
 #
 #    http://www.apache.org/licenses/LICENSE-2.0
 #
 # Unless required by applicable law or agreed to in writing, software
 # distributed under the License is distributed on an "AS IS" BASIS,
 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
 # implied.
 # See the License for the specific language governing permissions and
 # limitations under the License.

 # Patrole Release Notes documentation build configuration file, created by
 # sphinx-quickstart on Tue Jan 5 17:40:50 2017.
 #
 # This file is execfile()d with the current directory set to its
 # containing dir.
 #
 # Note that not all possible configuration values are present in this
 # autogenerated file.
 #
 # All configuration values have a default; values that are commented out
 # serve to show the default.

 # If extensions (or modules to document with autodoc) are in another directory,
 # add these directories to sys.path here. If the directory is relative to the
 # documentation root, use os.path.abspath to make it absolute, like shown here.
 # sys.path.insert(0, os.path.abspath('.'))

 # -- General configuration ------------------------------------------------

 # If your documentation needs a minimal Sphinx version, state it here.
 # needs_sphinx = '1.0'

 # Add any Sphinx extension module names here, as strings. They can be
 # extensions coming with Sphinx (named 'sphinx.ext.*') or your custom
 # ones.
 extensions = [
     'openstackdocstheme',
     'reno.sphinxext',
 ]

 # Add any paths that contain templates here, relative to this directory.
 templates_path = ['_templates']

 # The suffix of source filenames.
 source_suffix = '.rst'

 # The encoding of source files.
 # source_encoding = 'utf-8-sig'

 # The master toctree document.
 master_doc = 'index'

 # General information about the project.
 project = u'Patrole Release Notes'
 copyright = u'2017, Patrole Developers'

 # Release do not need a version number in the title, they
 # cover multiple versions.

 # The full version, including alpha/beta/rc tags.
 release = ''
 # The short X.Y version.
 version = ''

 # The language for content autogenerated by Sphinx. Refer to documentation
 # for a list of supported languages.
 # language = None

 # There are two options for replacing |today|: either, you set today to some
 # non-false value, then it is used:
 # today = ''
 # Else, today_fmt is used as the format for a strftime call.
 # today_fmt = '%B %d, %Y'

 # List of patterns, relative to source directory, that match files and
 # directories to ignore when looking for source files.
 exclude_patterns = []

 # The reST default role (used for this markup: `text`) to use for all
 # documents.
 # default_role = None

 # If true, '()' will be appended to :func: etc. cross-reference text.
 # add_function_parentheses = True

 # If true, the current module name will be prepended to all description
 # unit titles (such as .. function::).
 # add_module_names = True

 # If true, sectionauthor and moduleauthor directives will be shown in the
 # output. They are ignored by default.
 # show_authors = False

 # The name of the Pygments (syntax highlighting) style to use.
 pygments_style = 'sphinx'

 # A list of ignored prefixes for module index sorting.
 # modindex_common_prefix = []

 # If true, keep warnings as "system message" paragraphs in the built documents.
 # keep_warnings = False


 # -- Options for HTML output ----------------------------------------------

 # The theme to use for HTML and HTML Help pages.  See the documentation for
 # a list of builtin themes.
 html_theme = 'openstackdocs'

 # Theme options are theme-specific and customize the look and feel of a theme
 # further.  For a list of options available for each theme, see the
 # documentation.
 # html_theme_options = {}

 # Add any paths that contain custom themes here, relative to this directory.
 # html_theme_path = []

 # The name for this set of Sphinx documents.  If None, it defaults to
 # "<project> v<release> documentation".
 # html_title = None

 # A shorter title for the navigation bar.  Default is the same as html_title.
 # html_short_title = None

 # The name of an image file (relative to this directory) to place at the top
 # of the sidebar.
 # html_logo = None

 # The name of an image file (within the static path) to use as favicon of the
 # docs.  This file should be a Windows icon file (.ico) being 16x16 or 32x32
 # pixels large.
 # html_favicon = None

 # Add any paths that contain custom static files (such as style sheets) here,
 # relative to this directory. They are copied after the builtin static files,
 # so a file named "default.css" will overwrite the builtin "default.css".
 html_static_path = ['_static']

 # Add any extra paths that contain custom files (such as robots.txt or
 # .htaccess) here, relative to this directory. These files are copied
 # directly to the root of the documentation.
 # html_extra_path = []

 # If true, SmartyPants will be used to convert quotes and dashes to
 # typographically correct entities.
 # html_use_smartypants = True

 # Custom sidebar templates, maps document names to template names.
 # html_sidebars = {}

 # Additional templates that should be rendered to pages, maps page names to
 # template names.
 # html_additional_pages = {}

 # If false, no module index is generated.
 # html_domain_indices = True

 # If false, no index is generated.
 # html_use_index = True

 # If true, the index is split into individual pages for each letter.
 # html_split_index = False

 # If true, links to the reST sources are added to the pages.
 # html_show_sourcelink = True

 # If true, "Created using Sphinx" is shown in the HTML footer. Default is True.
 # html_show_sphinx = True

 # If true, "(C) Copyright ..." is shown in the HTML footer. Default is True.
 # html_show_copyright = True

 # If true, an OpenSearch description file will be output, and all pages will
 # contain a <link> tag referring to it.  The value of this option must be the
 # base URL from which the finished HTML is served.
 # html_use_opensearch = ''

 # This is the file name suffix for HTML files (e.g. ".xhtml").
 # html_file_suffix = None

 # Output file base name for HTML help builder.
 htmlhelp_basename = 'PatroleReleaseNotesdoc'

 # openstackdocstheme options
 openstackdocs_repo_name = 'openstack/patrole'
 openstackdocs_bug_project = 'patrole'
 openstackdocs_bug_tag = ''
 openstackdocs_auto_name = False

 # -- Options for LaTeX output ---------------------------------------------

 latex_elements = {
     # The paper size ('letterpaper' or 'a4paper').
     # 'papersize': 'letterpaper',

     # The font size ('10pt', '11pt' or '12pt').
     # 'pointsize': '10pt',

     # Additional stuff for the LaTeX preamble.
     # 'preamble': '',
 }

 # Grouping the document tree into LaTeX files. List of tuples
 # (source start file, target name, title,
 #  author, documentclass [howto, manual, or own class]).
 latex_documents = [
     ('index', 'PatroleReleaseNotes.tex',
      u'Patrole Release Notes Documentation',
      u'Patrole Developers', 'manual'),
 ]

 # The name of an image file (relative to this directory) to place at the top of
 # the title page.
 # latex_logo = None

 # For "manual" documents, if this is true, then toplevel headings are parts,
 # not chapters.
 # latex_use_parts = False

 # If true, show page references after internal links.
 # latex_show_pagerefs = False

 # If true, show URL addresses after external links.
 # latex_show_urls = False

 # Documents to append as an appendix to all manuals.
 # latex_appendices = []

 # If false, no module index is generated.
 # latex_domain_indices = True


 # -- Options for manual page output ---------------------------------------

 # One entry per manual page. List of tuples
 # (source start file, name, description, authors, manual section).
 man_pages = [
     ('index', 'patrolereleasenotes', u'Patrole Release Notes Documentation',
      [u'Patrole Developers'], 1)
 ]

 # If true, show URL addresses after external links.
 # man_show_urls = False


 # -- Options for Texinfo output -------------------------------------------

 # Grouping the document tree into Texinfo files. List of tuples
 # (source start file, target name, title, author,
 #  dir menu entry, description, category)
 texinfo_documents = [
     ('index', 'PatroleReleaseNotes', u'Patrole Release Notes Documentation',
      u'Patrole Developers', 'PatroleReleaseNotes',
      'A Tempest plugin for performing RBAC testing.',
      'Miscellaneous'),
 ]

 # Documents to append as an appendix to all manuals.
 # texinfo_appendices = []

 # If false, no module index is generated.
 # texinfo_domain_indices = True

 # How to display URL addresses: 'footnote', 'no', or 'inline'.
 # texinfo_show_urls = 'footnote'

 # If true, do not generate a @detailmenu in the "Top" node's menu.
 # texinfo_no_detailmenu = False

 # -- Options for Internationalization output ------------------------------
 locale_dirs = ['locale/']
	# -- coding: utf-8 --
	# Licensed under the Apache License, Version 2.0 (the "License");
	# you may not use this file except in compliance with the License.
	# You may obtain a copy of the License at
	#
	# http://www.apache.org/licenses/LICENSE-2.0
	#
	# Unless required by applicable law or agreed to in writing, software
	# distributed under the License is distributed on an "AS IS" BASIS,
	# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
	# implied.
	# See the License for the specific language governing permissions and
	# limitations under the License.

	# Patrole Release Notes documentation build configuration file, created by
	# sphinx-quickstart on Tue Jan 5 17:40:50 2017.
	#
	# This file is execfile()d with the current directory set to its
	# containing dir.
	#
	# Note that not all possible configuration values are present in this
	# autogenerated file.
	#
	# All configuration values have a default; values that are commented out
	# serve to show the default.

	# If extensions (or modules to document with autodoc) are in another directory,
	# add these directories to sys.path here. If the directory is relative to the
	# documentation root, use os.path.abspath to make it absolute, like shown here.
	# sys.path.insert(0, os.path.abspath('.'))

	# -- General configuration ------------------------------------------------

	# If your documentation needs a minimal Sphinx version, state it here.
	# needs_sphinx = '1.0'

	# Add any Sphinx extension module names here, as strings. They can be
	# extensions coming with Sphinx (named 'sphinx.ext.*') or your custom
	# ones.
	extensions = [
	'openstackdocstheme',
	'reno.sphinxext',
	]

	# Add any paths that contain templates here, relative to this directory.
	templates_path = ['_templates']

	# The suffix of source filenames.
	source_suffix = '.rst'

	# The encoding of source files.
	# source_encoding = 'utf-8-sig'

	# The master toctree document.
	master_doc = 'index'

	# General information about the project.
	project = u'Patrole Release Notes'
	copyright = u'2017, Patrole Developers'

	# Release do not need a version number in the title, they
	# cover multiple versions.

	# The full version, including alpha/beta/rc tags.
	release = ''
	# The short X.Y version.
	version = ''

	# The language for content autogenerated by Sphinx. Refer to documentation
	# for a list of supported languages.
	# language = None

	# There are two options for replacing \|today\|: either, you set today to some
	# non-false value, then it is used:
	# today = ''
	# Else, today_fmt is used as the format for a strftime call.
	# today_fmt = '%B %d, %Y'

	# List of patterns, relative to source directory, that match files and
	# directories to ignore when looking for source files.
	exclude_patterns = []

	# The reST default role (used for this markup: `text`) to use for all
	# documents.
	# default_role = None

	# If true, '()' will be appended to :func: etc. cross-reference text.
	# add_function_parentheses = True

	# If true, the current module name will be prepended to all description
	# unit titles (such as .. function::).
	# add_module_names = True

	# If true, sectionauthor and moduleauthor directives will be shown in the
	# output. They are ignored by default.
	# show_authors = False

	# The name of the Pygments (syntax highlighting) style to use.
	pygments_style = 'sphinx'

	# A list of ignored prefixes for module index sorting.
	# modindex_common_prefix = []

	# If true, keep warnings as "system message" paragraphs in the built documents.
	# keep_warnings = False


	# -- Options for HTML output ----------------------------------------------

	# The theme to use for HTML and HTML Help pages. See the documentation for
	# a list of builtin themes.
	html_theme = 'openstackdocs'

	# Theme options are theme-specific and customize the look and feel of a theme
	# further. For a list of options available for each theme, see the
	# documentation.
	# html_theme_options = {}

	# Add any paths that contain custom themes here, relative to this directory.
	# html_theme_path = []

	# The name for this set of Sphinx documents. If None, it defaults to
	# "<project> v<release> documentation".
	# html_title = None

	# A shorter title for the navigation bar. Default is the same as html_title.
	# html_short_title = None

	# The name of an image file (relative to this directory) to place at the top
	# of the sidebar.
	# html_logo = None

	# The name of an image file (within the static path) to use as favicon of the
	# docs. This file should be a Windows icon file (.ico) being 16x16 or 32x32
	# pixels large.
	# html_favicon = None

	# Add any paths that contain custom static files (such as style sheets) here,
	# relative to this directory. They are copied after the builtin static files,
	# so a file named "default.css" will overwrite the builtin "default.css".
	html_static_path = ['_static']

	# Add any extra paths that contain custom files (such as robots.txt or
	# .htaccess) here, relative to this directory. These files are copied
	# directly to the root of the documentation.
	# html_extra_path = []

	# If true, SmartyPants will be used to convert quotes and dashes to
	# typographically correct entities.
	# html_use_smartypants = True

	# Custom sidebar templates, maps document names to template names.
	# html_sidebars = {}

	# Additional templates that should be rendered to pages, maps page names to
	# template names.
	# html_additional_pages = {}

	# If false, no module index is generated.
	# html_domain_indices = True

	# If false, no index is generated.
	# html_use_index = True

	# If true, the index is split into individual pages for each letter.
	# html_split_index = False

	# If true, links to the reST sources are added to the pages.
	# html_show_sourcelink = True

	# If true, "Created using Sphinx" is shown in the HTML footer. Default is True.
	# html_show_sphinx = True

	# If true, "(C) Copyright ..." is shown in the HTML footer. Default is True.
	# html_show_copyright = True

	# If true, an OpenSearch description file will be output, and all pages will
	# contain a <link> tag referring to it. The value of this option must be the
	# base URL from which the finished HTML is served.
	# html_use_opensearch = ''

	# This is the file name suffix for HTML files (e.g. ".xhtml").
	# html_file_suffix = None

	# Output file base name for HTML help builder.
	htmlhelp_basename = 'PatroleReleaseNotesdoc'

	# openstackdocstheme options
	openstackdocs_repo_name = 'openstack/patrole'
	openstackdocs_bug_project = 'patrole'
	openstackdocs_bug_tag = ''
	openstackdocs_auto_name = False

	# -- Options for LaTeX output ---------------------------------------------

	latex_elements = {
	# The paper size ('letterpaper' or 'a4paper').
	# 'papersize': 'letterpaper',

	# The font size ('10pt', '11pt' or '12pt').
	# 'pointsize': '10pt',

	# Additional stuff for the LaTeX preamble.
	# 'preamble': '',
	}

	# Grouping the document tree into LaTeX files. List of tuples
	# (source start file, target name, title,
	# author, documentclass [howto, manual, or own class]).
	latex_documents = [
	('index', 'PatroleReleaseNotes.tex',
	u'Patrole Release Notes Documentation',
	u'Patrole Developers', 'manual'),
	]

	# The name of an image file (relative to this directory) to place at the top of
	# the title page.
	# latex_logo = None

	# For "manual" documents, if this is true, then toplevel headings are parts,
	# not chapters.
	# latex_use_parts = False

	# If true, show page references after internal links.
	# latex_show_pagerefs = False

	# If true, show URL addresses after external links.
	# latex_show_urls = False

	# Documents to append as an appendix to all manuals.
	# latex_appendices = []

	# If false, no module index is generated.
	# latex_domain_indices = True


	# -- Options for manual page output ---------------------------------------

	# One entry per manual page. List of tuples
	# (source start file, name, description, authors, manual section).
	man_pages = [
	('index', 'patrolereleasenotes', u'Patrole Release Notes Documentation',
	[u'Patrole Developers'], 1)
	]

	# If true, show URL addresses after external links.
	# man_show_urls = False


	# -- Options for Texinfo output -------------------------------------------

	# Grouping the document tree into Texinfo files. List of tuples
	# (source start file, target name, title, author,
	# dir menu entry, description, category)
	texinfo_documents = [
	('index', 'PatroleReleaseNotes', u'Patrole Release Notes Documentation',
	u'Patrole Developers', 'PatroleReleaseNotes',
	'A Tempest plugin for performing RBAC testing.',
	'Miscellaneous'),
	]

	# Documents to append as an appendix to all manuals.
	# texinfo_appendices = []

	# If false, no module index is generated.
	# texinfo_domain_indices = True

	# How to display URL addresses: 'footnote', 'no', or 'inline'.
	# texinfo_show_urls = 'footnote'

	# If true, do not generate a @detailmenu in the "Top" node's menu.
	# texinfo_no_detailmenu = False

	# -- Options for Internationalization output ------------------------------
	locale_dirs = ['locale/']