diff --git a/neutron/tests/tempest/config.py b/neutron/tests/tempest/config.py
new file mode 100644
index 0000000..deab890
--- /dev/null
+++ b/neutron/tests/tempest/config.py
@@ -0,0 +1,1236 @@
+# Copyright 2012 OpenStack Foundation
+# All Rights Reserved.
+#
+#    Licensed under the Apache License, Version 2.0 (the "License"); you may
+#    not use this file except in compliance with the License. You may obtain
+#    a copy of the License at
+#
+#         http://www.apache.org/licenses/LICENSE-2.0
+#
+#    Unless required by applicable law or agreed to in writing, software
+#    distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+#    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+#    License for the specific language governing permissions and limitations
+#    under the License.
+
+from __future__ import print_function
+
+import logging as std_logging
+import os
+
+from oslo.config import cfg
+
+from oslo_concurrency import lockutils
+from neutron.openstack.common import log as logging
+
+
+def register_opt_group(conf, opt_group, options):
+    conf.register_group(opt_group)
+    for opt in options:
+        conf.register_opt(opt, group=opt_group.name)
+
+
+auth_group = cfg.OptGroup(name='auth',
+                          title="Options for authentication and credentials")
+
+
+AuthGroup = [
+    cfg.StrOpt('test_accounts_file',
+               default='etc/accounts.yaml',
+               help="Path to the yaml file that contains the list of "
+                    "credentials to use for running tests"),
+    cfg.BoolOpt('allow_tenant_isolation',
+                default=True,
+                help="Allows test cases to create/destroy tenants and "
+                     "users. This option requires that OpenStack Identity "
+                     "API admin credentials are known. If false, isolated "
+                     "test cases and parallel execution, can still be "
+                     "achieved configuring a list of test accounts",
+                deprecated_opts=[cfg.DeprecatedOpt('allow_tenant_isolation',
+                                                   group='compute'),
+                                 cfg.DeprecatedOpt('allow_tenant_isolation',
+                                                   group='orchestration')]),
+    cfg.BoolOpt('locking_credentials_provider',
+                default=False,
+                help="If set to True it enables the Accounts provider, "
+                     "which locks credentials to allow for parallel execution "
+                     "with pre-provisioned accounts. It can only be used to "
+                     "run tests that ensure credentials cleanup happens. "
+                     "It requires at least `2 * CONC` distinct accounts "
+                     "configured in `test_accounts_file`, with CONC == the "
+                     "number of concurrent test processes."),
+    cfg.ListOpt('tempest_roles',
+                help="Roles to assign to all users created by tempest",
+                default=[])
+]
+
+identity_group = cfg.OptGroup(name='identity',
+                              title="Keystone Configuration Options")
+
+IdentityGroup = [
+    cfg.StrOpt('catalog_type',
+               default='identity',
+               help="Catalog type of the Identity service."),
+    cfg.BoolOpt('disable_ssl_certificate_validation',
+                default=False,
+                help="Set to True if using self-signed SSL certificates."),
+    cfg.StrOpt('ca_certificates_file',
+               default=None,
+               help='Specify a CA bundle file to use in verifying a '
+                    'TLS (https) server certificate.'),
+    cfg.StrOpt('uri',
+               help="Full URI of the OpenStack Identity API (Keystone), v2"),
+    cfg.StrOpt('uri_v3',
+               help='Full URI of the OpenStack Identity API (Keystone), v3'),
+    cfg.StrOpt('auth_version',
+               default='v2',
+               help="Identity API version to be used for authentication "
+                    "for API tests."),
+    cfg.StrOpt('region',
+               default='RegionOne',
+               help="The identity region name to use. Also used as the other "
+                    "services' region name unless they are set explicitly. "
+                    "If no such region is found in the service catalog, the "
+                    "first found one is used."),
+    cfg.StrOpt('endpoint_type',
+               default='publicURL',
+               choices=['public', 'admin', 'internal',
+                        'publicURL', 'adminURL', 'internalURL'],
+               help="The endpoint type to use for the identity service."),
+    cfg.StrOpt('username',
+               help="Username to use for Nova API requests."),
+    cfg.StrOpt('tenant_name',
+               help="Tenant name to use for Nova API requests."),
+    cfg.StrOpt('admin_role',
+               default='admin',
+               help="Role required to administrate keystone."),
+    cfg.StrOpt('password',
+               help="API key to use when authenticating.",
+               secret=True),
+    cfg.StrOpt('domain_name',
+               help="Domain name for authentication (Keystone V3)."
+                    "The same domain applies to user and project"),
+    cfg.StrOpt('alt_username',
+               help="Username of alternate user to use for Nova API "
+                    "requests."),
+    cfg.StrOpt('alt_tenant_name',
+               help="Alternate user's Tenant name to use for Nova API "
+                    "requests."),
+    cfg.StrOpt('alt_password',
+               help="API key to use when authenticating as alternate user.",
+               secret=True),
+    cfg.StrOpt('alt_domain_name',
+               help="Alternate domain name for authentication (Keystone V3)."
+                    "The same domain applies to user and project"),
+    cfg.StrOpt('admin_username',
+               help="Administrative Username to use for "
+                    "Keystone API requests."),
+    cfg.StrOpt('admin_tenant_name',
+               help="Administrative Tenant name to use for Keystone API "
+                    "requests."),
+    cfg.StrOpt('admin_password',
+               help="API key to use when authenticating as admin.",
+               secret=True),
+    cfg.StrOpt('admin_domain_name',
+               help="Admin domain name for authentication (Keystone V3)."
+                    "The same domain applies to user and project"),
+]
+
+identity_feature_group = cfg.OptGroup(name='identity-feature-enabled',
+                                      title='Enabled Identity Features')
+
+IdentityFeatureGroup = [
+    cfg.BoolOpt('trust',
+                default=True,
+                help='Does the identity service have delegation and '
+                     'impersonation enabled'),
+    cfg.BoolOpt('api_v2',
+                default=True,
+                help='Is the v2 identity API enabled'),
+    cfg.BoolOpt('api_v3',
+                default=True,
+                help='Is the v3 identity API enabled'),
+]
+
+compute_group = cfg.OptGroup(name='compute',
+                             title='Compute Service Options')
+
+ComputeGroup = [
+    cfg.StrOpt('image_ref',
+               help="Valid primary image reference to be used in tests. "
+                    "This is a required option"),
+    cfg.StrOpt('image_ref_alt',
+               help="Valid secondary image reference to be used in tests. "
+                    "This is a required option, but if only one image is "
+                    "available duplicate the value of image_ref above"),
+    cfg.StrOpt('flavor_ref',
+               default="1",
+               help="Valid primary flavor to use in tests."),
+    cfg.StrOpt('flavor_ref_alt',
+               default="2",
+               help='Valid secondary flavor to be used in tests.'),
+    cfg.StrOpt('image_ssh_user',
+               default="root",
+               help="User name used to authenticate to an instance."),
+    cfg.StrOpt('image_ssh_password',
+               default="password",
+               help="Password used to authenticate to an instance."),
+    cfg.StrOpt('image_alt_ssh_user',
+               default="root",
+               help="User name used to authenticate to an instance using "
+                    "the alternate image."),
+    cfg.StrOpt('image_alt_ssh_password',
+               default="password",
+               help="Password used to authenticate to an instance using "
+                    "the alternate image."),
+    cfg.IntOpt('build_interval',
+               default=1,
+               help="Time in seconds between build status checks."),
+    cfg.IntOpt('build_timeout',
+               default=300,
+               help="Timeout in seconds to wait for an instance to build. "
+                    "Other services that do not define build_timeout will "
+                    "inherit this value."),
+    cfg.BoolOpt('run_ssh',
+                default=False,
+                help="Should the tests ssh to instances?"),
+    cfg.StrOpt('ssh_auth_method',
+               default='keypair',
+               help="Auth method used for authenticate to the instance. "
+                    "Valid choices are: keypair, configured, adminpass. "
+                    "keypair: start the servers with an ssh keypair. "
+                    "configured: use the configured user and password. "
+                    "adminpass: use the injected adminPass. "
+                    "disabled: avoid using ssh when it is an option."),
+    cfg.StrOpt('ssh_connect_method',
+               default='fixed',
+               help="How to connect to the instance? "
+                    "fixed: using the first ip belongs the fixed network "
+                    "floating: creating and using a floating ip"),
+    cfg.StrOpt('ssh_user',
+               default='root',
+               help="User name used to authenticate to an instance."),
+    cfg.IntOpt('ping_timeout',
+               default=120,
+               help="Timeout in seconds to wait for ping to "
+                    "succeed."),
+    cfg.IntOpt('ssh_timeout',
+               default=300,
+               help="Timeout in seconds to wait for authentication to "
+                    "succeed."),
+    cfg.IntOpt('ready_wait',
+               default=0,
+               help="Additional wait time for clean state, when there is "
+                    "no OS-EXT-STS extension available"),
+    cfg.IntOpt('ssh_channel_timeout',
+               default=60,
+               help="Timeout in seconds to wait for output from ssh "
+                    "channel."),
+    cfg.StrOpt('fixed_network_name',
+               default='private',
+               help="Name of the fixed network that is visible to all test "
+                    "tenants."),
+    cfg.StrOpt('network_for_ssh',
+               default='public',
+               help="Network used for SSH connections. Ignored if "
+                    "use_floatingip_for_ssh=true or run_ssh=false."),
+    cfg.IntOpt('ip_version_for_ssh',
+               default=4,
+               help="IP version used for SSH connections."),
+    cfg.BoolOpt('use_floatingip_for_ssh',
+                default=True,
+                help="Does SSH use Floating IPs?"),
+    cfg.StrOpt('catalog_type',
+               default='compute',
+               help="Catalog type of the Compute service."),
+    cfg.StrOpt('region',
+               default='',
+               help="The compute region name to use. If empty, the value "
+                    "of identity.region is used instead. If no such region "
+                    "is found in the service catalog, the first found one is "
+                    "used."),
+    cfg.StrOpt('endpoint_type',
+               default='publicURL',
+               choices=['public', 'admin', 'internal',
+                        'publicURL', 'adminURL', 'internalURL'],
+               help="The endpoint type to use for the compute service."),
+    cfg.StrOpt('path_to_private_key',
+               help="Path to a private key file for SSH access to remote "
+                    "hosts"),
+    cfg.StrOpt('volume_device_name',
+               default='vdb',
+               help="Expected device name when a volume is attached to "
+                    "an instance"),
+    cfg.IntOpt('shelved_offload_time',
+               default=0,
+               help='Time in seconds before a shelved instance is eligible '
+                    'for removing from a host.  -1 never offload, 0 offload '
+                    'when shelved. This time should be the same as the time '
+                    'of nova.conf, and some tests will run for as long as the '
+                    'time.'),
+    cfg.StrOpt('floating_ip_range',
+               default='10.0.0.0/29',
+               help='Unallocated floating IP range, which will be used to '
+                    'test the floating IP bulk feature for CRUD operation. '
+                    'This block must not overlap an existing floating IP '
+                    'pool.')
+]
+
+compute_features_group = cfg.OptGroup(name='compute-feature-enabled',
+                                      title="Enabled Compute Service Features")
+
+ComputeFeaturesGroup = [
+    cfg.BoolOpt('disk_config',
+                default=True,
+                help="If false, skip disk config tests"),
+    cfg.ListOpt('api_extensions',
+                default=['all'],
+                help='A list of enabled compute extensions with a special '
+                     'entry all which indicates every extension is enabled. '
+                     'Each extension should be specified with alias name. '
+                     'Empty list indicates all extensions are disabled'),
+    cfg.BoolOpt('change_password',
+                default=False,
+                help="Does the test environment support changing the admin "
+                     "password?"),
+    cfg.BoolOpt('console_output',
+                default=True,
+                help="Does the test environment support obtaining instance "
+                     "serial console output?"),
+    cfg.BoolOpt('resize',
+                default=False,
+                help="Does the test environment support resizing?"),
+    cfg.BoolOpt('pause',
+                default=True,
+                help="Does the test environment support pausing?"),
+    cfg.BoolOpt('shelve',
+                default=True,
+                help="Does the test environment support shelving/unshelving?"),
+    cfg.BoolOpt('suspend',
+                default=True,
+                help="Does the test environment support suspend/resume?"),
+    cfg.BoolOpt('live_migration',
+                default=True,
+                help="Does the test environment support live migration "
+                     "available?"),
+    cfg.BoolOpt('block_migration_for_live_migration',
+                default=False,
+                help="Does the test environment use block devices for live "
+                     "migration"),
+    cfg.BoolOpt('block_migrate_cinder_iscsi',
+                default=False,
+                help="Does the test environment block migration support "
+                     "cinder iSCSI volumes"),
+    cfg.BoolOpt('vnc_console',
+                default=False,
+                help='Enable VNC console. This configuration value should '
+                     'be same as [nova.vnc]->vnc_enabled in nova.conf'),
+    cfg.BoolOpt('spice_console',
+                default=False,
+                help='Enable Spice console. This configuration value should '
+                     'be same as [nova.spice]->enabled in nova.conf'),
+    cfg.BoolOpt('rdp_console',
+                default=False,
+                help='Enable RDP console. This configuration value should '
+                     'be same as [nova.rdp]->enabled in nova.conf'),
+    cfg.BoolOpt('rescue',
+                default=True,
+                help='Does the test environment support instance rescue '
+                     'mode?'),
+    cfg.BoolOpt('enable_instance_password',
+                default=True,
+                help='Enables returning of the instance password by the '
+                     'relevant server API calls such as create, rebuild '
+                     'or rescue.'),
+    cfg.BoolOpt('interface_attach',
+                default=True,
+                help='Does the test environment support dynamic network '
+                     'interface attachment?'),
+    cfg.BoolOpt('snapshot',
+                default=True,
+                help='Does the test environment support creating snapshot '
+                     'images of running instances?'),
+    cfg.BoolOpt('ec2_api',
+                default=True,
+                help='Does the test environment have the ec2 api running?')
+]
+
+
+image_group = cfg.OptGroup(name='image',
+                           title="Image Service Options")
+
+ImageGroup = [
+    cfg.StrOpt('catalog_type',
+               default='image',
+               help='Catalog type of the Image service.'),
+    cfg.StrOpt('region',
+               default='',
+               help="The image region name to use. If empty, the value "
+                    "of identity.region is used instead. If no such region "
+                    "is found in the service catalog, the first found one is "
+                    "used."),
+    cfg.StrOpt('endpoint_type',
+               default='publicURL',
+               choices=['public', 'admin', 'internal',
+                        'publicURL', 'adminURL', 'internalURL'],
+               help="The endpoint type to use for the image service."),
+    cfg.StrOpt('http_image',
+               default='http://download.cirros-cloud.net/0.3.1/'
+               'cirros-0.3.1-x86_64-uec.tar.gz',
+               help='http accessible image'),
+    cfg.IntOpt('build_timeout',
+               default=300,
+               help="Timeout in seconds to wait for an image to "
+                    "become available."),
+    cfg.IntOpt('build_interval',
+               default=1,
+               help="Time in seconds between image operation status "
+                    "checks.")
+]
+
+image_feature_group = cfg.OptGroup(name='image-feature-enabled',
+                                   title='Enabled image service features')
+
+ImageFeaturesGroup = [
+    cfg.BoolOpt('api_v2',
+                default=True,
+                help="Is the v2 image API enabled"),
+    cfg.BoolOpt('api_v1',
+                default=True,
+                help="Is the v1 image API enabled"),
+]
+
+network_group = cfg.OptGroup(name='network',
+                             title='Network Service Options')
+
+NetworkGroup = [
+    cfg.StrOpt('catalog_type',
+               default='network',
+               help='Catalog type of the Neutron service.'),
+    cfg.StrOpt('region',
+               default='',
+               help="The network region name to use. If empty, the value "
+                    "of identity.region is used instead. If no such region "
+                    "is found in the service catalog, the first found one is "
+                    "used."),
+    cfg.StrOpt('endpoint_type',
+               default='publicURL',
+               choices=['public', 'admin', 'internal',
+                        'publicURL', 'adminURL', 'internalURL'],
+               help="The endpoint type to use for the network service."),
+    cfg.StrOpt('tenant_network_cidr',
+               default="10.100.0.0/16",
+               help="The cidr block to allocate tenant ipv4 subnets from"),
+    cfg.IntOpt('tenant_network_mask_bits',
+               default=28,
+               help="The mask bits for tenant ipv4 subnets"),
+    cfg.StrOpt('tenant_network_v6_cidr',
+               default="2003::/48",
+               help="The cidr block to allocate tenant ipv6 subnets from"),
+    cfg.IntOpt('tenant_network_v6_mask_bits',
+               default=64,
+               help="The mask bits for tenant ipv6 subnets"),
+    cfg.BoolOpt('tenant_networks_reachable',
+                default=False,
+                help="Whether tenant network connectivity should be "
+                     "evaluated directly"),
+    cfg.StrOpt('public_network_id',
+               default="",
+               help="Id of the public network that provides external "
+                    "connectivity"),
+    cfg.StrOpt('public_router_id',
+               default="",
+               help="Id of the public router that provides external "
+                    "connectivity. This should only be used when Neutron's "
+                    "'allow_overlapping_ips' is set to 'False' in "
+                    "neutron.conf. usually not needed past 'Grizzly' release"),
+    cfg.IntOpt('build_timeout',
+               default=300,
+               help="Timeout in seconds to wait for network operation to "
+                    "complete."),
+    cfg.IntOpt('build_interval',
+               default=1,
+               help="Time in seconds between network operation status "
+                    "checks."),
+    cfg.ListOpt('dns_servers',
+                default=["8.8.8.8", "8.8.4.4"],
+                help="List of dns servers which should be used"
+                     " for subnet creation"),
+    cfg.StrOpt('port_vnic_type',
+               choices=[None, 'normal', 'direct', 'macvtap'],
+               help="vnic_type to use when Launching instances"
+                    " with pre-configured ports."
+                    " Supported ports are:"
+                    " ['normal','direct','macvtap']"),
+]
+
+network_feature_group = cfg.OptGroup(name='network-feature-enabled',
+                                     title='Enabled network service features')
+
+NetworkFeaturesGroup = [
+    cfg.BoolOpt('ipv6',
+                default=True,
+                help="Allow the execution of IPv6 tests"),
+    cfg.ListOpt('api_extensions',
+                default=['all'],
+                help='A list of enabled network extensions with a special '
+                     'entry all which indicates every extension is enabled. '
+                     'Empty list indicates all extensions are disabled'),
+    cfg.BoolOpt('ipv6_subnet_attributes',
+                default=False,
+                help="Allow the execution of IPv6 subnet tests that use "
+                     "the extended IPv6 attributes ipv6_ra_mode "
+                     "and ipv6_address_mode"
+                ),
+]
+
+messaging_group = cfg.OptGroup(name='messaging',
+                               title='Messaging Service')
+
+MessagingGroup = [
+    cfg.StrOpt('catalog_type',
+               default='messaging',
+               help='Catalog type of the Messaging service.'),
+    cfg.IntOpt('max_queues_per_page',
+               default=20,
+               help='The maximum number of queue records per page when '
+                    'listing queues'),
+    cfg.IntOpt('max_queue_metadata',
+               default=65536,
+               help='The maximum metadata size for a queue'),
+    cfg.IntOpt('max_messages_per_page',
+               default=20,
+               help='The maximum number of queue message per page when '
+                    'listing (or) posting messages'),
+    cfg.IntOpt('max_message_size',
+               default=262144,
+               help='The maximum size of a message body'),
+    cfg.IntOpt('max_messages_per_claim',
+               default=20,
+               help='The maximum number of messages per claim'),
+    cfg.IntOpt('max_message_ttl',
+               default=1209600,
+               help='The maximum ttl for a message'),
+    cfg.IntOpt('max_claim_ttl',
+               default=43200,
+               help='The maximum ttl for a claim'),
+    cfg.IntOpt('max_claim_grace',
+               default=43200,
+               help='The maximum grace period for a claim'),
+]
+
+volume_group = cfg.OptGroup(name='volume',
+                            title='Block Storage Options')
+
+VolumeGroup = [
+    cfg.IntOpt('build_interval',
+               default=1,
+               help='Time in seconds between volume availability checks.'),
+    cfg.IntOpt('build_timeout',
+               default=300,
+               help='Timeout in seconds to wait for a volume to become '
+                    'available.'),
+    cfg.StrOpt('catalog_type',
+               default='volume',
+               help="Catalog type of the Volume Service"),
+    cfg.StrOpt('region',
+               default='',
+               help="The volume region name to use. If empty, the value "
+                    "of identity.region is used instead. If no such region "
+                    "is found in the service catalog, the first found one is "
+                    "used."),
+    cfg.StrOpt('endpoint_type',
+               default='publicURL',
+               choices=['public', 'admin', 'internal',
+                        'publicURL', 'adminURL', 'internalURL'],
+               help="The endpoint type to use for the volume service."),
+    cfg.StrOpt('backend1_name',
+               default='BACKEND_1',
+               help="Name of the backend1 (must be declared in cinder.conf)"),
+    cfg.StrOpt('backend2_name',
+               default='BACKEND_2',
+               help="Name of the backend2 (must be declared in cinder.conf)"),
+    cfg.StrOpt('storage_protocol',
+               default='iSCSI',
+               help='Backend protocol to target when creating volume types'),
+    cfg.StrOpt('vendor_name',
+               default='Open Source',
+               help='Backend vendor to target when creating volume types'),
+    cfg.StrOpt('disk_format',
+               default='raw',
+               help='Disk format to use when copying a volume to image'),
+    cfg.IntOpt('volume_size',
+               default=1,
+               help='Default size in GB for volumes created by volumes tests'),
+]
+
+volume_feature_group = cfg.OptGroup(name='volume-feature-enabled',
+                                    title='Enabled Cinder Features')
+
+VolumeFeaturesGroup = [
+    cfg.BoolOpt('multi_backend',
+                default=False,
+                help="Runs Cinder multi-backend test (requires 2 backends)"),
+    cfg.BoolOpt('backup',
+                default=True,
+                help='Runs Cinder volumes backup test'),
+    cfg.BoolOpt('snapshot',
+                default=True,
+                help='Runs Cinder volume snapshot test'),
+    cfg.ListOpt('api_extensions',
+                default=['all'],
+                help='A list of enabled volume extensions with a special '
+                     'entry all which indicates every extension is enabled. '
+                     'Empty list indicates all extensions are disabled'),
+    cfg.BoolOpt('api_v1',
+                default=True,
+                help="Is the v1 volume API enabled"),
+    cfg.BoolOpt('api_v2',
+                default=True,
+                help="Is the v2 volume API enabled"),
+]
+
+
+object_storage_group = cfg.OptGroup(name='object-storage',
+                                    title='Object Storage Service Options')
+
+ObjectStoreGroup = [
+    cfg.StrOpt('catalog_type',
+               default='object-store',
+               help="Catalog type of the Object-Storage service."),
+    cfg.StrOpt('region',
+               default='',
+               help="The object-storage region name to use. If empty, the "
+                    "value of identity.region is used instead. If no such "
+                    "region is found in the service catalog, the first found "
+                    "one is used."),
+    cfg.StrOpt('endpoint_type',
+               default='publicURL',
+               choices=['public', 'admin', 'internal',
+                        'publicURL', 'adminURL', 'internalURL'],
+               help="The endpoint type to use for the object-store service."),
+    cfg.IntOpt('container_sync_timeout',
+               default=600,
+               help="Number of seconds to time on waiting for a container "
+                    "to container synchronization complete."),
+    cfg.IntOpt('container_sync_interval',
+               default=5,
+               help="Number of seconds to wait while looping to check the "
+                    "status of a container to container synchronization"),
+    cfg.StrOpt('operator_role',
+               default='Member',
+               help="Role to add to users created for swift tests to "
+                    "enable creating containers"),
+    cfg.StrOpt('reseller_admin_role',
+               default='ResellerAdmin',
+               help="User role that has reseller admin"),
+    cfg.StrOpt('realm_name',
+               default='realm1',
+               help="Name of sync realm. A sync realm is a set of clusters "
+                    "that have agreed to allow container syncing with each "
+                    "other. Set the same realm name as Swift's "
+                    "container-sync-realms.conf"),
+    cfg.StrOpt('cluster_name',
+               default='name1',
+               help="One name of cluster which is set in the realm whose name "
+                    "is set in 'realm_name' item in this file. Set the "
+                    "same cluster name as Swift's container-sync-realms.conf"),
+]
+
+object_storage_feature_group = cfg.OptGroup(
+    name='object-storage-feature-enabled',
+    title='Enabled object-storage features')
+
+ObjectStoreFeaturesGroup = [
+    cfg.ListOpt('discoverable_apis',
+                default=['all'],
+                help="A list of the enabled optional discoverable apis. "
+                     "A single entry, all, indicates that all of these "
+                     "features are expected to be enabled"),
+    cfg.BoolOpt('container_sync',
+                default=True,
+                help="Execute (old style) container-sync tests"),
+    cfg.BoolOpt('object_versioning',
+                default=True,
+                help="Execute object-versioning tests"),
+    cfg.BoolOpt('discoverability',
+                default=True,
+                help="Execute discoverability tests"),
+]
+
+database_group = cfg.OptGroup(name='database',
+                              title='Database Service Options')
+
+DatabaseGroup = [
+    cfg.StrOpt('catalog_type',
+               default='database',
+               help="Catalog type of the Database service."),
+    cfg.StrOpt('db_flavor_ref',
+               default="1",
+               help="Valid primary flavor to use in database tests."),
+    cfg.StrOpt('db_current_version',
+               default="v1.0",
+               help="Current database version to use in database tests."),
+]
+
+orchestration_group = cfg.OptGroup(name='orchestration',
+                                   title='Orchestration Service Options')
+
+OrchestrationGroup = [
+    cfg.StrOpt('catalog_type',
+               default='orchestration',
+               help="Catalog type of the Orchestration service."),
+    cfg.StrOpt('region',
+               default='',
+               help="The orchestration region name to use. If empty, the "
+                    "value of identity.region is used instead. If no such "
+                    "region is found in the service catalog, the first found "
+                    "one is used."),
+    cfg.StrOpt('endpoint_type',
+               default='publicURL',
+               choices=['public', 'admin', 'internal',
+                        'publicURL', 'adminURL', 'internalURL'],
+               help="The endpoint type to use for the orchestration service."),
+    cfg.IntOpt('build_interval',
+               default=1,
+               help="Time in seconds between build status checks."),
+    cfg.IntOpt('build_timeout',
+               default=1200,
+               help="Timeout in seconds to wait for a stack to build."),
+    cfg.StrOpt('instance_type',
+               default='m1.micro',
+               help="Instance type for tests. Needs to be big enough for a "
+                    "full OS plus the test workload"),
+    cfg.StrOpt('image_ref',
+               help="Name of heat-cfntools enabled image to use when "
+                    "launching test instances."),
+    cfg.StrOpt('keypair_name',
+               help="Name of existing keypair to launch servers with."),
+    cfg.IntOpt('max_template_size',
+               default=524288,
+               help="Value must match heat configuration of the same name."),
+    cfg.IntOpt('max_resources_per_stack',
+               default=1000,
+               help="Value must match heat configuration of the same name."),
+]
+
+
+telemetry_group = cfg.OptGroup(name='telemetry',
+                               title='Telemetry Service Options')
+
+TelemetryGroup = [
+    cfg.StrOpt('catalog_type',
+               default='metering',
+               help="Catalog type of the Telemetry service."),
+    cfg.StrOpt('endpoint_type',
+               default='publicURL',
+               choices=['public', 'admin', 'internal',
+                        'publicURL', 'adminURL', 'internalURL'],
+               help="The endpoint type to use for the telemetry service."),
+    cfg.BoolOpt('too_slow_to_test',
+                default=True,
+                help="This variable is used as flag to enable "
+                     "notification tests")
+]
+
+
+dashboard_group = cfg.OptGroup(name="dashboard",
+                               title="Dashboard options")
+
+DashboardGroup = [
+    cfg.StrOpt('dashboard_url',
+               default='http://localhost/',
+               help="Where the dashboard can be found"),
+    cfg.StrOpt('login_url',
+               default='http://localhost/auth/login/',
+               help="Login page for the dashboard"),
+]
+
+
+data_processing_group = cfg.OptGroup(name="data_processing",
+                                     title="Data Processing options")
+
+DataProcessingGroup = [
+    cfg.StrOpt('catalog_type',
+               default='data_processing',
+               help="Catalog type of the data processing service."),
+    cfg.StrOpt('endpoint_type',
+               default='publicURL',
+               choices=['public', 'admin', 'internal',
+                        'publicURL', 'adminURL', 'internalURL'],
+               help="The endpoint type to use for the data processing "
+                    "service."),
+]
+
+
+data_processing_feature_group = cfg.OptGroup(
+    name="data_processing-feature-enabled",
+    title="Enabled Data Processing features")
+
+DataProcessingFeaturesGroup = [
+    cfg.ListOpt('plugins',
+                default=["vanilla", "hdp"],
+                help="List of enabled data processing plugins")
+]
+
+
+boto_group = cfg.OptGroup(name='boto',
+                          title='EC2/S3 options')
+BotoGroup = [
+    cfg.StrOpt('ec2_url',
+               default="http://localhost:8773/services/Cloud",
+               help="EC2 URL"),
+    cfg.StrOpt('s3_url',
+               default="http://localhost:8080",
+               help="S3 URL"),
+    cfg.StrOpt('aws_secret',
+               help="AWS Secret Key",
+               secret=True),
+    cfg.StrOpt('aws_access',
+               help="AWS Access Key"),
+    cfg.StrOpt('aws_zone',
+               default="nova",
+               help="AWS Zone for EC2 tests"),
+    cfg.StrOpt('s3_materials_path',
+               default="/opt/stack/devstack/files/images/"
+                       "s3-materials/cirros-0.3.0",
+               help="S3 Materials Path"),
+    cfg.StrOpt('ari_manifest',
+               default="cirros-0.3.0-x86_64-initrd.manifest.xml",
+               help="ARI Ramdisk Image manifest"),
+    cfg.StrOpt('ami_manifest',
+               default="cirros-0.3.0-x86_64-blank.img.manifest.xml",
+               help="AMI Machine Image manifest"),
+    cfg.StrOpt('aki_manifest',
+               default="cirros-0.3.0-x86_64-vmlinuz.manifest.xml",
+               help="AKI Kernel Image manifest"),
+    cfg.StrOpt('instance_type',
+               default="m1.tiny",
+               help="Instance type"),
+    cfg.IntOpt('http_socket_timeout',
+               default=3,
+               help="boto Http socket timeout"),
+    cfg.IntOpt('num_retries',
+               default=1,
+               help="boto num_retries on error"),
+    cfg.IntOpt('build_timeout',
+               default=60,
+               help="Status Change Timeout"),
+    cfg.IntOpt('build_interval',
+               default=1,
+               help="Status Change Test Interval"),
+]
+
+stress_group = cfg.OptGroup(name='stress', title='Stress Test Options')
+
+StressGroup = [
+    cfg.StrOpt('nova_logdir',
+               help='Directory containing log files on the compute nodes'),
+    cfg.IntOpt('max_instances',
+               default=16,
+               help='Maximum number of instances to create during test.'),
+    cfg.StrOpt('controller',
+               help='Controller host.'),
+    # new stress options
+    cfg.StrOpt('target_controller',
+               help='Controller host.'),
+    cfg.StrOpt('target_ssh_user',
+               help='ssh user.'),
+    cfg.StrOpt('target_private_key_path',
+               help='Path to private key.'),
+    cfg.StrOpt('target_logfiles',
+               help='regexp for list of log files.'),
+    cfg.IntOpt('log_check_interval',
+               default=60,
+               help='time (in seconds) between log file error checks.'),
+    cfg.IntOpt('default_thread_number_per_action',
+               default=4,
+               help='The number of threads created while stress test.'),
+    cfg.BoolOpt('leave_dirty_stack',
+                default=False,
+                help='Prevent the cleaning (tearDownClass()) between'
+                     ' each stress test run if an exception occurs'
+                     ' during this run.'),
+    cfg.BoolOpt('full_clean_stack',
+                default=False,
+                help='Allows a full cleaning process after a stress test.'
+                     ' Caution : this cleanup will remove every objects of'
+                     ' every tenant.')
+]
+
+
+scenario_group = cfg.OptGroup(name='scenario', title='Scenario Test Options')
+
+ScenarioGroup = [
+    cfg.StrOpt('img_dir',
+               default='/opt/stack/new/devstack/files/images/'
+               'cirros-0.3.1-x86_64-uec',
+               help='Directory containing image files'),
+    cfg.StrOpt('img_file', deprecated_name='qcow2_img_file',
+               default='cirros-0.3.1-x86_64-disk.img',
+               help='Image file name'),
+    cfg.StrOpt('img_disk_format',
+               default='qcow2',
+               help='Image disk format'),
+    cfg.StrOpt('img_container_format',
+               default='bare',
+               help='Image container format'),
+    cfg.StrOpt('ami_img_file',
+               default='cirros-0.3.1-x86_64-blank.img',
+               help='AMI image file name'),
+    cfg.StrOpt('ari_img_file',
+               default='cirros-0.3.1-x86_64-initrd',
+               help='ARI image file name'),
+    cfg.StrOpt('aki_img_file',
+               default='cirros-0.3.1-x86_64-vmlinuz',
+               help='AKI image file name'),
+    cfg.StrOpt('ssh_user',
+               default='cirros',
+               help='ssh username for the image file'),
+    cfg.IntOpt(
+        'large_ops_number',
+        default=0,
+        help="specifies how many resources to request at once. Used "
+        "for large operations testing."),
+    # TODO(yfried): add support for dhcpcd
+    cfg.StrOpt('dhcp_client',
+               default='udhcpc',
+               choices=["udhcpc", "dhclient"],
+               help='DHCP client used by images to renew DCHP lease. '
+                    'If left empty, update operation will be skipped. '
+                    'Supported clients: "udhcpc", "dhclient"')
+]
+
+
+service_available_group = cfg.OptGroup(name="service_available",
+                                       title="Available OpenStack Services")
+
+ServiceAvailableGroup = [
+    cfg.BoolOpt('cinder',
+                default=True,
+                help="Whether or not cinder is expected to be available"),
+    cfg.BoolOpt('neutron',
+                default=False,
+                help="Whether or not neutron is expected to be available"),
+    cfg.BoolOpt('glance',
+                default=True,
+                help="Whether or not glance is expected to be available"),
+    cfg.BoolOpt('swift',
+                default=True,
+                help="Whether or not swift is expected to be available"),
+    cfg.BoolOpt('nova',
+                default=True,
+                help="Whether or not nova is expected to be available"),
+    cfg.BoolOpt('heat',
+                default=False,
+                help="Whether or not Heat is expected to be available"),
+    cfg.BoolOpt('ceilometer',
+                default=True,
+                help="Whether or not Ceilometer is expected to be available"),
+    cfg.BoolOpt('horizon',
+                default=True,
+                help="Whether or not Horizon is expected to be available"),
+    cfg.BoolOpt('sahara',
+                default=False,
+                help="Whether or not Sahara is expected to be available"),
+    cfg.BoolOpt('ironic',
+                default=False,
+                help="Whether or not Ironic is expected to be available"),
+    cfg.BoolOpt('trove',
+                default=False,
+                help="Whether or not Trove is expected to be available"),
+    cfg.BoolOpt('zaqar',
+                default=False,
+                help="Whether or not Zaqar is expected to be available"),
+]
+
+debug_group = cfg.OptGroup(name="debug",
+                           title="Debug System")
+
+DebugGroup = [
+    cfg.StrOpt('trace_requests',
+               default='',
+               help="""A regex to determine which requests should be traced.
+
+This is a regex to match the caller for rest client requests to be able to
+selectively trace calls out of specific classes and methods. It largely
+exists for test development, and is not expected to be used in a real deploy
+of tempest. This will be matched against the discovered ClassName:method
+in the test environment.
+
+Expected values for this field are:
+
+ * ClassName:test_method_name - traces one test_method
+ * ClassName:setUp(Class) - traces specific setup functions
+ * ClassName:tearDown(Class) - traces specific teardown functions
+ * ClassName:_run_cleanups - traces the cleanup functions
+
+If nothing is specified, this feature is not enabled. To trace everything
+specify .* as the regex.
+""")
+]
+
+input_scenario_group = cfg.OptGroup(name="input-scenario",
+                                    title="Filters and values for"
+                                          " input scenarios")
+
+InputScenarioGroup = [
+    cfg.StrOpt('image_regex',
+               default='^cirros-0.3.1-x86_64-uec$',
+               help="Matching images become parameters for scenario tests"),
+    cfg.StrOpt('flavor_regex',
+               default='^m1.nano$',
+               help="Matching flavors become parameters for scenario tests"),
+    cfg.StrOpt('non_ssh_image_regex',
+               default='^.*[Ww]in.*$',
+               help="SSH verification in tests is skipped"
+                    "for matching images"),
+    cfg.StrOpt('ssh_user_regex',
+               default="[[\"^.*[Cc]irros.*$\", \"root\"]]",
+               help="List of user mapped to regex "
+                    "to matching image names."),
+]
+
+
+baremetal_group = cfg.OptGroup(name='baremetal',
+                               title='Baremetal provisioning service options',
+                               help='When enabling baremetal tests, Nova '
+                                    'must be configured to use the Ironic '
+                                    'driver. The following paremeters for the '
+                                    '[compute] section must be disabled: '
+                                    'console_output, interface_attach, '
+                                    'live_migration, pause, rescue, resize '
+                                    'shelve, snapshot, and suspend')
+
+BaremetalGroup = [
+    cfg.StrOpt('catalog_type',
+               default='baremetal',
+               help="Catalog type of the baremetal provisioning service"),
+    cfg.BoolOpt('driver_enabled',
+                default=False,
+                help="Whether the Ironic nova-compute driver is enabled"),
+    cfg.StrOpt('driver',
+               default='fake',
+               help="Driver name which Ironic uses"),
+    cfg.StrOpt('endpoint_type',
+               default='publicURL',
+               choices=['public', 'admin', 'internal',
+                        'publicURL', 'adminURL', 'internalURL'],
+               help="The endpoint type to use for the baremetal provisioning "
+                    "service"),
+    cfg.IntOpt('active_timeout',
+               default=300,
+               help="Timeout for Ironic node to completely provision"),
+    cfg.IntOpt('association_timeout',
+               default=30,
+               help="Timeout for association of Nova instance and Ironic "
+                    "node"),
+    cfg.IntOpt('power_timeout',
+               default=60,
+               help="Timeout for Ironic power transitions."),
+    cfg.IntOpt('unprovision_timeout',
+               default=60,
+               help="Timeout for unprovisioning an Ironic node.")
+]
+
+cli_group = cfg.OptGroup(name='cli', title="cli Configuration Options")
+
+CLIGroup = [
+    cfg.BoolOpt('enabled',
+                default=True,
+                help="enable cli tests"),
+    cfg.StrOpt('cli_dir',
+               default='/usr/local/bin',
+               help="directory where python client binaries are located"),
+    cfg.BoolOpt('has_manage',
+                default=True,
+                help=("Whether the tempest run location has access to the "
+                      "*-manage commands. In a pure blackbox environment "
+                      "it will not.")),
+    cfg.IntOpt('timeout',
+               default=15,
+               help="Number of seconds to wait on a CLI timeout"),
+]
+
+negative_group = cfg.OptGroup(name='negative', title="Negative Test Options")
+
+NegativeGroup = [
+    cfg.StrOpt('test_generator',
+               default='tempest.common.' +
+               'generator.negative_generator.NegativeTestGenerator',
+               help="Test generator class for all negative tests"),
+]
+
+_opts = [
+    (auth_group, AuthGroup),
+    (compute_group, ComputeGroup),
+    (compute_features_group, ComputeFeaturesGroup),
+    (identity_group, IdentityGroup),
+    (identity_feature_group, IdentityFeatureGroup),
+    (image_group, ImageGroup),
+    (image_feature_group, ImageFeaturesGroup),
+    (network_group, NetworkGroup),
+    (network_feature_group, NetworkFeaturesGroup),
+    (messaging_group, MessagingGroup),
+    (volume_group, VolumeGroup),
+    (volume_feature_group, VolumeFeaturesGroup),
+    (object_storage_group, ObjectStoreGroup),
+    (object_storage_feature_group, ObjectStoreFeaturesGroup),
+    (database_group, DatabaseGroup),
+    (orchestration_group, OrchestrationGroup),
+    (telemetry_group, TelemetryGroup),
+    (dashboard_group, DashboardGroup),
+    (data_processing_group, DataProcessingGroup),
+    (data_processing_feature_group, DataProcessingFeaturesGroup),
+    (boto_group, BotoGroup),
+    (stress_group, StressGroup),
+    (scenario_group, ScenarioGroup),
+    (service_available_group, ServiceAvailableGroup),
+    (debug_group, DebugGroup),
+    (baremetal_group, BaremetalGroup),
+    (input_scenario_group, InputScenarioGroup),
+    (cli_group, CLIGroup),
+    (negative_group, NegativeGroup)
+]
+
+
+def register_opts():
+    for g, o in _opts:
+        register_opt_group(cfg.CONF, g, o)
+
+
+def list_opts():
+    """Return a list of oslo.config options available.
+
+    The purpose of this is to allow tools like the Oslo sample config file
+    generator to discover the options exposed to users.
+    """
+    optlist = [(g.name, o) for g, o in _opts]
+
+    # NOTE(jgrimm): Can be removed once oslo-incubator/oslo changes happen.
+    optlist.append((None, lockutils.util_opts))
+    optlist.append((None, logging.common_cli_opts))
+    optlist.append((None, logging.logging_cli_opts))
+    optlist.append((None, logging.generic_log_opts))
+    optlist.append((None, logging.log_opts))
+
+    return optlist
+
+
+# this should never be called outside of this class
+class TempestConfigPrivate(object):
+    """Provides OpenStack configuration information."""
+
+    DEFAULT_CONFIG_DIR = os.path.join(
+        os.path.abspath(os.path.dirname(os.path.dirname(__file__))),
+        "etc")
+
+    DEFAULT_CONFIG_FILE = "tempest.conf"
+
+    def __getattr__(self, attr):
+        # Handles config options from the default group
+        return getattr(cfg.CONF, attr)
+
+    def _set_attrs(self):
+        self.auth = cfg.CONF.auth
+        self.compute = cfg.CONF.compute
+        self.compute_feature_enabled = cfg.CONF['compute-feature-enabled']
+        self.identity = cfg.CONF.identity
+        self.identity_feature_enabled = cfg.CONF['identity-feature-enabled']
+        self.image = cfg.CONF.image
+        self.image_feature_enabled = cfg.CONF['image-feature-enabled']
+        self.network = cfg.CONF.network
+        self.network_feature_enabled = cfg.CONF['network-feature-enabled']
+        self.volume = cfg.CONF.volume
+        self.volume_feature_enabled = cfg.CONF['volume-feature-enabled']
+        self.object_storage = cfg.CONF['object-storage']
+        self.object_storage_feature_enabled = cfg.CONF[
+            'object-storage-feature-enabled']
+        self.database = cfg.CONF.database
+        self.orchestration = cfg.CONF.orchestration
+        self.messaging = cfg.CONF.messaging
+        self.telemetry = cfg.CONF.telemetry
+        self.dashboard = cfg.CONF.dashboard
+        self.data_processing = cfg.CONF.data_processing
+        self.data_processing_feature_enabled = cfg.CONF[
+            'data_processing-feature-enabled']
+        self.boto = cfg.CONF.boto
+        self.stress = cfg.CONF.stress
+        self.scenario = cfg.CONF.scenario
+        self.service_available = cfg.CONF.service_available
+        self.debug = cfg.CONF.debug
+        self.baremetal = cfg.CONF.baremetal
+        self.input_scenario = cfg.CONF['input-scenario']
+        self.cli = cfg.CONF.cli
+        self.negative = cfg.CONF.negative
+        cfg.CONF.set_default('domain_name', self.identity.admin_domain_name,
+                             group='identity')
+        cfg.CONF.set_default('alt_domain_name',
+                             self.identity.admin_domain_name,
+                             group='identity')
+
+    def __init__(self, parse_conf=True, config_path=None):
+        """Initialize a configuration from a conf directory and conf file."""
+        super(TempestConfigPrivate, self).__init__()
+        config_files = []
+        failsafe_path = "/etc/tempest/" + self.DEFAULT_CONFIG_FILE
+
+        if config_path:
+            path = config_path
+        else:
+            # Environment variables override defaults...
+            conf_dir = os.environ.get('TEMPEST_CONFIG_DIR',
+                                      self.DEFAULT_CONFIG_DIR)
+            conf_file = os.environ.get('TEMPEST_CONFIG',
+                                       self.DEFAULT_CONFIG_FILE)
+
+            path = os.path.join(conf_dir, conf_file)
+
+        if not os.path.isfile(path):
+            path = failsafe_path
+
+        # only parse the config file if we expect one to exist. This is needed
+        # to remove an issue with the config file up to date checker.
+        if parse_conf:
+            config_files.append(path)
+        if os.path.isfile(path):
+            cfg.CONF([], project='tempest', default_config_files=config_files)
+        else:
+            cfg.CONF([], project='tempest')
+        logging.setup('tempest')
+        LOG = logging.getLogger('tempest')
+        LOG.info("Using tempest config file %s" % path)
+        register_opts()
+        self._set_attrs()
+        if parse_conf:
+            cfg.CONF.log_opt_values(LOG, std_logging.DEBUG)
+
+
+class TempestConfigProxy(object):
+    _config = None
+    _path = None
+
+    _extra_log_defaults = [
+        'keystoneclient.session=INFO',
+        'paramiko.transport=INFO',
+        'requests.packages.urllib3.connectionpool=WARN'
+    ]
+
+    def _fix_log_levels(self):
+        """Tweak the oslo log defaults."""
+        for opt in logging.log_opts:
+            if opt.dest == 'default_log_levels':
+                opt.default.extend(self._extra_log_defaults)
+
+    def __getattr__(self, attr):
+        if not self._config:
+            self._fix_log_levels()
+            self._config = TempestConfigPrivate(config_path=self._path)
+
+        return getattr(self._config, attr)
+
+    def set_config_path(self, path):
+        self._path = path
+
+
+CONF = TempestConfigProxy()