diff --git a/.zuul.yaml b/.zuul.yaml
index 750f21f..f7802d4 100644
--- a/.zuul.yaml
+++ b/.zuul.yaml
@@ -526,6 +526,7 @@
         neutron-segments: true
         neutron-trunk: true
         neutron-log: true
+        neutron-port-forwarding: true
         cinder: true
       devstack_local_conf:
         post-config:
@@ -588,6 +589,7 @@
           neutron-qos: true
           neutron-trunk: true
           neutron-log: true
+          neutron-port-forwarding: true
         devstack_local_conf:
           post-config:
             $NEUTRON_CONF:
diff --git a/neutron_tempest_plugin/scenario/test_connectivity.py b/neutron_tempest_plugin/scenario/test_connectivity.py
index 311c263..6aaf48d 100644
--- a/neutron_tempest_plugin/scenario/test_connectivity.py
+++ b/neutron_tempest_plugin/scenario/test_connectivity.py
@@ -146,3 +146,77 @@
         self.check_remote_connectivity(
             sshclient, internal_port_2['fixed_ips'][0]['ip_address'],
             ping_count=10)
+
+    @utils.requires_ext(extension="dvr", service="network")
+    @decorators.idempotent_id('69d3650a-5c32-40bc-ae56-5c4c849ddd37')
+    def test_connectivity_dvr_and_no_dvr_routers_in_same_subnet(self):
+        """This test case tests connectivity between vm and 2 routers.
+
+        Subnet is connected to dvr and non-dvr routers in the same time, test
+        ensures that connectivity from VM to both routers is working.
+
+        Test scenario:
+        +----------------+                  +------------+
+        | Non-dvr router |                  | DVR router |
+        |                |                  |            |
+        |    10.0.0.1    |                  |  10.0.0.x  |
+        +-------+--------+                  +-----+------+
+                |                                 |
+                |         10.0.0.0/24             |
+                +----------------+----------------+
+                                 |
+                               +-+-+
+                               |VM |
+                               +---+
+
+        where:
+        10.0.0.1 - is subnet's gateway IP address,
+        10.0.0.x - is any other IP address taken from subnet's range
+
+        Test ensures that both 10.0.0.1 and 10.0.0.x IP addresses are
+        reachable from VM.
+        """
+
+        network = self.create_network()
+        subnet = self.create_subnet(
+            network, cidr="10.0.0.0/24", gateway="10.0.0.1")
+
+        non_dvr_router = self.create_router_by_client(
+            tenant_id=self.client.tenant_id,
+            is_admin=True,
+            router_name=data_utils.rand_name("nondvr-2-routers-same-network"),
+            admin_state_up=True,
+            distributed=False)
+        self.create_router_interface(non_dvr_router['id'], subnet['id'])
+
+        dvr_router = self.create_router_by_client(
+            tenant_id=self.client.tenant_id,
+            is_admin=True,
+            router_name=data_utils.rand_name("dvr-2-rotuers-same-network"),
+            admin_state_up=True,
+            distributed=True)
+        dvr_router_port = self.create_port(network)
+        self.client.add_router_interface_with_port_id(
+            dvr_router['id'], dvr_router_port['id'])
+
+        vm = self.create_server(
+            flavor_ref=CONF.compute.flavor_ref,
+            image_ref=CONF.compute.image_ref,
+            key_name=self.keypair['name'],
+            networks=[{'uuid': network['id']}],
+            security_groups=[{'name': self.secgroup['name']}])
+        self.wait_for_server_active(vm['server'])
+
+        vm_port = self.client.list_ports(
+            network_id=network['id'], device_id=vm['server']['id'])['ports'][0]
+        fip = self.create_and_associate_floatingip(vm_port['id'])
+
+        sshclient = ssh.Client(
+            fip['floating_ip_address'], CONF.validation.image_ssh_user,
+            pkey=self.keypair['private_key'])
+
+        self.check_remote_connectivity(
+            sshclient, '10.0.0.1', ping_count=10)
+        self.check_remote_connectivity(
+            sshclient, dvr_router_port['fixed_ips'][0]['ip_address'],
+            ping_count=10)
diff --git a/neutron_tempest_plugin/scenario/test_port_forwardings.py b/neutron_tempest_plugin/scenario/test_port_forwardings.py
new file mode 100644
index 0000000..e366d8f
--- /dev/null
+++ b/neutron_tempest_plugin/scenario/test_port_forwardings.py
@@ -0,0 +1,75 @@
+# Copyright 2019 Red Hat, Inc.
+# All Rights Reserved.
+#
+#    Licensed under the Apache License, Version 2.0 (the "License"); you may
+#    not use this file except in compliance with the License. You may obtain
+#    a copy of the License at
+#
+#         http://www.apache.org/licenses/LICENSE-2.0
+#
+#    Unless required by applicable law or agreed to in writing, software
+#    distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+#    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+#    License for the specific language governing permissions and limitations
+#    under the License.
+
+from tempest.lib.common.utils import data_utils
+from tempest.lib import decorators
+
+from neutron_tempest_plugin.common import ssh
+from neutron_tempest_plugin import config
+from neutron_tempest_plugin.scenario import base
+
+CONF = config.CONF
+
+
+class PortForwardingTestJSON(base.BaseTempestTestCase):
+
+    required_extensions = ['router', 'floating-ip-port-forwarding']
+
+    @classmethod
+    def resource_setup(cls):
+        super(PortForwardingTestJSON, cls).resource_setup()
+        cls.network = cls.create_network()
+        cls.subnet = cls.create_subnet(cls.network)
+        cls.router = cls.create_router_by_client()
+        cls.create_router_interface(cls.router['id'], cls.subnet['id'])
+        cls.fip = cls.create_floatingip()
+        cls.secgroup = cls.create_security_group(
+            name=data_utils.rand_name("test_port_secgroup"))
+        cls.create_loginable_secgroup_rule(secgroup_id=cls.secgroup['id'])
+        cls.keypair = cls.create_keypair()
+
+    @decorators.idempotent_id('ab40fc48-ca8d-41a0-b2a3-f6679c847bfe')
+    def test_port_forwarding_to_2_servers(self):
+        internal_tcp_port = 22
+        servers = []
+        for i in range(1, 3):
+            external_tcp_port = 1000 + i
+            name = data_utils.rand_name("server-%s" % i)
+            port = self.create_port(
+                self.network,
+                security_groups=[self.secgroup['id']])
+            server = self.create_server(
+                flavor_ref=CONF.compute.flavor_ref,
+                image_ref=CONF.compute.image_ref,
+                key_name=self.keypair['name'], name=name,
+                networks=[{'port': port['id']}])['server']
+            server['name'] = name
+            self.wait_for_server_active(server)
+            server['port_forwarding'] = self.create_port_forwarding(
+                self.fip['id'],
+                internal_port_id=port['id'],
+                internal_ip_address=port['fixed_ips'][0]['ip_address'],
+                internal_port=internal_tcp_port,
+                external_port=external_tcp_port,
+                protocol="tcp")
+            servers.append(server)
+
+        for server in servers:
+            ssh_client = ssh.Client(
+                self.fip['floating_ip_address'],
+                CONF.validation.image_ssh_user,
+                pkey=self.keypair['private_key'],
+                port=server['port_forwarding']['external_port'])
+            self.assertIn(server['name'], ssh_client.exec_command('hostname'))