# Copyright 2012 OpenStack Foundation
# Copyright 2013 IBM Corp.
# All Rights Reserved.
#
#    Licensed under the Apache License, Version 2.0 (the "License"); you may
#    not use this file except in compliance with the License. You may obtain
#    a copy of the License at
#
#         http://www.apache.org/licenses/LICENSE-2.0
#
#    Unless required by applicable law or agreed to in writing, software
#    distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
#    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
#    License for the specific language governing permissions and limitations
#    under the License.

# NOTE(soliosg) Do not edit this file. It will only stay temporarily
# in ironic, while QA refactors the tempest.scenario interface. This
# file was copied from openstack/tempest/tempest/scenario/manager.py,
# openstack/tempest commit: 82a278e88c9e9f9ba49f81c1f8dba0bca7943daf

import subprocess

from oslo_log import log
from oslo_utils import netutils
from tempest.common import compute
from tempest.common.utils.linux import remote_client
from tempest.common.utils import net_utils
from tempest.common import waiters
from tempest import config
from tempest import exceptions
from tempest.lib.common.utils import data_utils
from tempest.lib.common.utils import test_utils
from tempest.lib import exceptions as lib_exc
import tempest.test

CONF = config.CONF

LOG = log.getLogger(__name__)


class ScenarioTest(tempest.test.BaseTestCase):
    """Base class for scenario tests. Uses tempest own clients. """

    credentials = ['primary', 'admin', 'system_admin']

    @classmethod
    def setup_clients(cls):
        super(ScenarioTest, cls).setup_clients()
        # Clients (in alphabetical order)
        cls.flavors_client = cls.os_primary.flavors_client
        cls.compute_floating_ips_client = (
            cls.os_primary.compute_floating_ips_client)
        if CONF.service_available.glance:
            # Check if glance v1 is available to determine which client to use.
            if CONF.image_feature_enabled.api_v1:
                cls.image_client = cls.os_primary.image_client
            elif CONF.image_feature_enabled.api_v2:
                cls.image_client = cls.os_primary.image_client_v2
            else:
                raise lib_exc.InvalidConfiguration(
                    'Either api_v1 or api_v2 must be True in '
                    '[image-feature-enabled].')
        # Compute image client
        cls.compute_images_client = cls.os_primary.compute_images_client
        cls.keypairs_client = cls.os_primary.keypairs_client
        # Nova security groups client
        cls.compute_security_groups_client = (
            cls.os_primary.compute_security_groups_client)
        cls.compute_security_group_rules_client = (
            cls.os_primary.compute_security_group_rules_client)
        cls.servers_client = cls.os_primary.servers_client
        cls.interface_client = cls.os_primary.interfaces_client
        # Neutron network client
        cls.networks_client = cls.os_primary.networks_client
        cls.ports_client = cls.os_primary.ports_client
        cls.routers_client = cls.os_primary.routers_client
        cls.subnets_client = cls.os_primary.subnets_client
        cls.floating_ips_client = cls.os_primary.floating_ips_client
        cls.security_groups_client = cls.os_primary.security_groups_client
        cls.security_group_rules_client = (
            cls.os_primary.security_group_rules_client)

        cls.volumes_client = cls.os_primary.volumes_client_latest
        cls.snapshots_client = cls.os_primary.snapshots_client_latest

    # ## Test functions library
    #
    # The create_[resource] functions only return body and discard the
    # resp part which is not used in scenario tests

    def _create_port(self, network_id, client=None, namestart='port-quotatest',
                     **kwargs):
        if not client:
            client = self.os_primary.ports_client
        name = data_utils.rand_name(namestart)
        result = client.create_port(
            name=name,
            network_id=network_id,
            **kwargs)
        self.assertIsNotNone(result, 'Unable to allocate port')
        port = result['port']
        self.addCleanup(test_utils.call_and_ignore_notfound_exc,
                        client.delete_port, port['id'])
        return port

    def create_keypair(self, client=None):
        if not client:
            client = self.os_primary.keypairs_client
        name = data_utils.rand_name(self.__class__.__name__)
        # We don't need to create a keypair by pubkey in scenario
        body = client.create_keypair(name=name)
        self.addCleanup(client.delete_keypair, name)
        return body['keypair']

    def create_server(self, name=None, image_id=None, flavor=None,
                      validatable=False, wait_until='ACTIVE',
                      clients=None, **kwargs):
        """Wrapper utility that returns a test server.

        This wrapper utility calls the common create test server and
        returns a test server. The purpose of this wrapper is to minimize
        the impact on the code of the tests already using this
        function.
        """

        # NOTE(jlanoux): As a first step, ssh checks in the scenario
        # tests need to be run regardless of the run_validation and
        # validatable parameters and thus until the ssh validation job
        # becomes voting in CI. The test resources management and IP
        # association are taken care of in the scenario tests.
        # Therefore, the validatable parameter is set to false in all
        # those tests. In this way create_server just return a standard
        # server and the scenario tests always perform ssh checks.

        # Needed for the cross_tenant_traffic test:
        if clients is None:
            clients = self.os_primary

        if name is None:
            name = data_utils.rand_name(self.__class__.__name__ + "-server")

        vnic_type = CONF.network.port_vnic_type

        # If vnic_type is configured create port for
        # every network
        if vnic_type:
            ports = []

            create_port_body = {'binding:vnic_type': vnic_type,
                                'namestart': 'port-smoke'}
            if kwargs:
                # Convert security group names to security group ids
                # to pass to create_port
                if 'security_groups' in kwargs:
                    security_groups = \
                        clients.security_groups_client.list_security_groups(
                        ).get('security_groups')
                    sec_dict = dict([(s['name'], s['id'])
                                    for s in security_groups])

                    sec_groups_names = [s['name'] for s in kwargs.pop(
                        'security_groups')]
                    security_groups_ids = [sec_dict[s]
                                           for s in sec_groups_names]

                    if security_groups_ids:
                        create_port_body[
                            'security_groups'] = security_groups_ids
                networks = kwargs.pop('networks', [])
            else:
                networks = []

            # If there are no networks passed to us we look up
            # for the project's private networks and create a port.
            # The same behaviour as we would expect when passing
            # the call to the clients with no networks
            if not networks:
                networks = clients.networks_client.list_networks(
                    **{'router:external': False, 'fields': 'id'})['networks']

            # It's net['uuid'] if networks come from kwargs
            # and net['id'] if they come from
            # clients.networks_client.list_networks
            for net in networks:
                net_id = net.get('uuid', net.get('id'))
                if 'port' not in net:
                    port = self._create_port(network_id=net_id,
                                             client=clients.ports_client,
                                             **create_port_body)
                    ports.append({'port': port['id']})
                else:
                    ports.append({'port': net['port']})
            if ports:
                kwargs['networks'] = ports
            self.ports = ports

        tenant_network = self.get_tenant_network()

        body, servers = compute.create_test_server(
            clients,
            tenant_network=tenant_network,
            wait_until=wait_until,
            name=name, flavor=flavor,
            image_id=image_id, **kwargs)

        self.addCleanup(waiters.wait_for_server_termination,
                        clients.servers_client, body['id'])
        self.addCleanup(test_utils.call_and_ignore_notfound_exc,
                        clients.servers_client.delete_server, body['id'])
        server = clients.servers_client.show_server(body['id'])['server']
        return server

    def get_remote_client(self, ip_address, username=None, private_key=None):
        """Get a SSH client to a remote server

        @param ip_address the server floating or fixed IP address to use
                          for ssh validation
        @param username name of the Linux account on the remote server
        @param private_key the SSH private key to use
        @return a RemoteClient object
        """

        if username is None:
            username = CONF.validation.image_ssh_user
        # Set this with 'keypair' or others to log in with keypair or
        # username/password.
        if CONF.validation.auth_method == 'keypair':
            password = None
            if private_key is None:
                private_key = self.keypair['private_key']
        else:
            password = CONF.validation.image_ssh_password
            private_key = None
        linux_client = remote_client.RemoteClient(ip_address, username,
                                                  pkey=private_key,
                                                  password=password)
        try:
            linux_client.validate_authentication()
        except Exception as e:
            message = ('Initializing SSH connection to %(ip)s failed. '
                       'Error: %(error)s' % {'ip': ip_address,
                                             'error': e})
            caller = test_utils.find_test_caller()
            if caller:
                message = '(%s) %s' % (caller, message)
            LOG.exception(message)
            self._log_console_output()
            raise

        return linux_client

    def _log_console_output(self, servers=None):
        if not CONF.compute_feature_enabled.console_output:
            LOG.debug('Console output not supported, cannot log')
            return
        client = self.os_primary.servers_client
        if not servers:
            servers = client.list_servers()
            servers = servers['servers']
        for server in servers:
            try:
                console_output = client.get_console_output(
                    server['id'])['output']
                LOG.debug('Console output for %s\nbody=\n%s',
                          server['id'], console_output)
            except lib_exc.NotFound:
                LOG.debug("Server %s disappeared(deleted) while looking "
                          "for the console log", server['id'])

    def rebuild_server(self, server_id, image=None,
                       preserve_ephemeral=False, wait=True,
                       rebuild_kwargs=None):
        if image is None:
            image = CONF.compute.image_ref

        rebuild_kwargs = rebuild_kwargs or {}

        LOG.debug("Rebuilding server (id: %s, image: %s, preserve eph: %s)",
                  server_id, image, preserve_ephemeral)
        self.os_primary.servers_client.rebuild_server(
            server_id=server_id, image_ref=image,
            preserve_ephemeral=preserve_ephemeral,
            **rebuild_kwargs)
        if wait:
            waiters.wait_for_server_status(self.os_primary.servers_client,
                                           server_id, 'ACTIVE')

    def ping_ip_address(self, ip_address, should_succeed=True,
                        ping_timeout=None, mtu=None):
        timeout = ping_timeout or CONF.validation.ping_timeout
        cmd = ['ping', '-c1', '-w1']

        if mtu:
            cmd += [
                # don't fragment
                '-M', 'do',
                # ping receives just the size of ICMP payload
                '-s', str(net_utils.get_ping_payload_size(mtu, 4))
            ]
        cmd.append(ip_address)

        def ping():
            proc = subprocess.Popen(cmd,
                                    stdout=subprocess.PIPE,
                                    stderr=subprocess.PIPE)
            proc.communicate()

            return (proc.returncode == 0) == should_succeed

        caller = test_utils.find_test_caller()
        LOG.debug('%(caller)s begins to ping %(ip)s in %(timeout)s sec and the'
                  ' expected result is %(should_succeed)s', {
                      'caller': caller, 'ip': ip_address, 'timeout': timeout,
                      'should_succeed':
                      'reachable' if should_succeed else 'unreachable'
                  })
        result = test_utils.call_until_true(ping, timeout, 1)
        LOG.debug('%(caller)s finishes ping %(ip)s in %(timeout)s sec and the '
                  'ping result is %(result)s', {
                      'caller': caller, 'ip': ip_address, 'timeout': timeout,
                      'result': 'expected' if result else 'unexpected'
                  })
        return result

    def check_vm_connectivity(self, ip_address,
                              username=None,
                              private_key=None,
                              should_connect=True,
                              mtu=None):
        """Check server connectivity

        :param ip_address: server to test against
        :param username: server's ssh username
        :param private_key: server's ssh private key to be used
        :param should_connect: True/False indicates positive/negative test
            positive - attempt ping and ssh
            negative - attempt ping and fail if succeed
        :param mtu: network MTU to use for connectivity validation

        :raises: AssertError if the result of the connectivity check does
            not match the value of the should_connect param
        """
        if should_connect:
            msg = "Timed out waiting for %s to become reachable" % ip_address
        else:
            msg = "ip address %s is reachable" % ip_address
        self.assertTrue(self.ping_ip_address(ip_address,
                                             should_succeed=should_connect,
                                             mtu=mtu),
                        msg=msg)
        if should_connect:
            # no need to check ssh for negative connectivity
            self.get_remote_client(ip_address, username, private_key)

    def create_floating_ip(self, thing, pool_name=None):
        """Create a floating IP and associates to a server on Nova"""

        if not pool_name:
            pool_name = CONF.network.floating_network_name
        client = self.os_primary.compute_floating_ips_client
        floating_ip = (client.
                       create_floating_ip(pool=pool_name)['floating_ip'])
        self.addCleanup(test_utils.call_and_ignore_notfound_exc,
                        client.delete_floating_ip,
                        floating_ip['id'])
        client.associate_floating_ip_to_server(
            floating_ip['ip'], thing['id'])
        return floating_ip

    def create_timestamp(self, ip_address, dev_name=None, mount_path='/mnt',
                         private_key=None):
        ssh_client = self.get_remote_client(ip_address,
                                            private_key=private_key)
        if dev_name is not None:
            ssh_client.make_fs(dev_name)
            ssh_client.exec_command('sudo mount /dev/%s %s' % (dev_name,
                                                               mount_path))
        cmd_timestamp = 'sudo sh -c "date > %s/timestamp; sync"' % mount_path
        ssh_client.exec_command(cmd_timestamp)
        timestamp = ssh_client.exec_command('sudo cat %s/timestamp'
                                            % mount_path)
        if dev_name is not None:
            ssh_client.exec_command('sudo umount %s' % mount_path)
        return timestamp

    def get_server_ip(self, server):
        """Get the server fixed or floating IP.

        Based on the configuration we're in, return a correct ip
        address for validating that a guest is up.
        """
        if CONF.validation.connect_method == 'floating':
            # The tests calling this method don't have a floating IP
            # and can't make use of the validation resources. So the
            # method is creating the floating IP there.
            return self.create_floating_ip(server)['ip']
        elif CONF.validation.connect_method == 'fixed':
            # Determine the network name to look for based on config or creds
            # provider network resources.
            if CONF.validation.network_for_ssh:
                addresses = server['addresses'][
                    CONF.validation.network_for_ssh]
            else:
                creds_provider = self._get_credentials_provider()
                net_creds = creds_provider.get_primary_creds()
                network = getattr(net_creds, 'network', None)
                addresses = (server['addresses'][network['name']]
                             if network else [])
            for address in addresses:
                if (address['version'] == CONF.validation.ip_version_for_ssh
                        and address['OS-EXT-IPS:type'] == 'fixed'):
                    return address['addr']
            raise exceptions.ServerUnreachable(server_id=server['id'])
        else:
            raise lib_exc.InvalidConfiguration()

    def _get_router(self, client=None, tenant_id=None):
        """Retrieve a router for the given tenant id.

        If a public router has been configured, it will be returned.

        If a public router has not been configured, but a public
        network has, a tenant router will be created and returned that
        routes traffic to the public network.
        """
        if not client:
            client = self.os_primary.routers_client
        if not tenant_id:
            tenant_id = client.tenant_id
        router_id = CONF.network.public_router_id
        network_id = CONF.network.public_network_id
        if router_id:
            body = client.show_router(router_id)
            return body['router']
        elif network_id:
            router = self._create_router(client, tenant_id)
            kwargs = {'external_gateway_info': dict(network_id=network_id)}
            router = client.update_router(router['id'], **kwargs)['router']
            return router
        else:
            raise Exception("Neither of 'public_router_id' or "
                            "'public_network_id' has been defined.")

    def _create_router(self, client=None, tenant_id=None,
                       namestart='router-smoke'):
        if not client:
            client = self.os_primary.routers_client
        if not tenant_id:
            tenant_id = client.tenant_id
        name = data_utils.rand_name(namestart)
        result = client.create_router(name=name,
                                      admin_state_up=True,
                                      tenant_id=tenant_id)
        router = result['router']
        self.assertEqual(router['name'], name)
        self.addCleanup(test_utils.call_and_ignore_notfound_exc,
                        client.delete_router,
                        router['id'])
        return router


class NetworkScenarioTest(ScenarioTest):
    """Base class for network scenario tests.

    This class provide helpers for network scenario tests, using the neutron
    API. Helpers from ancestor which use the nova network API are overridden
    with the neutron API.

    This Class also enforces using Neutron instead of novanetwork.
    Subclassed tests will be skipped if Neutron is not enabled

    """

    credentials = ['primary', 'admin', 'system_admin']

    @classmethod
    def skip_checks(cls):
        super(NetworkScenarioTest, cls).skip_checks()
        if not CONF.service_available.neutron:
            raise cls.skipException('Neutron not available')

    def _create_network(self, networks_client=None,
                        tenant_id=None,
                        namestart='network-smoke-',
                        port_security_enabled=True):
        if not networks_client:
            networks_client = self.os_primary.networks_client
        if not tenant_id:
            tenant_id = self.os_primary.networks_client.tenant_id
        name = data_utils.rand_name(namestart)
        network_kwargs = dict(name=name, tenant_id=tenant_id)
        # Neutron disables port security by default so we have to check the
        # config before trying to create the network with port_security_enabled
        if CONF.network_feature_enabled.port_security:
            network_kwargs['port_security_enabled'] = port_security_enabled
        result = networks_client.create_network(**network_kwargs)
        network = result['network']

        self.assertEqual(network['name'], name)
        self.addCleanup(test_utils.call_and_ignore_notfound_exc,
                        networks_client.delete_network,
                        network['id'])
        return network

    def _get_server_port_id_and_ip4(self, server, ip_addr=None):
        if ip_addr:
            ports = self.os_admin.ports_client.list_ports(
                device_id=server['id'],
                fixed_ips='ip_address=%s' % ip_addr)['ports']
        else:
            ports = self.os_admin.ports_client.list_ports(
                device_id=server['id'])['ports']
        # A port can have more than one IP address in some cases.
        # If the network is dual-stack (IPv4 + IPv6), this port is associated
        # with 2 subnets
        p_status = ['ACTIVE']
        # NOTE(vsaienko) With Ironic, instances live on separate hardware
        # servers. Neutron does not bind ports for Ironic instances, as a
        # result the port remains in the DOWN state.
        # TODO(vsaienko) remove once bug: #1599836 is resolved.
        if getattr(CONF.service_available, 'ironic', False):
            p_status.append('DOWN')
        port_map = [(p["id"], fxip["ip_address"])
                    for p in ports
                    for fxip in p["fixed_ips"]
                    if netutils.is_valid_ipv4(fxip["ip_address"])
                    and p['status'] in p_status]
        inactive = [p for p in ports if p['status'] != 'ACTIVE']
        if inactive:
            LOG.warning("Instance has ports that are not ACTIVE: %s", inactive)

        self.assertNotEqual(0, len(port_map),
                            "No IPv4 addresses found in: %s" % ports)
        self.assertEqual(len(port_map), 1,
                         "Found multiple IPv4 addresses: %s. "
                         "Unable to determine which port to target."
                         % port_map)
        return port_map[0]

    def create_floating_ip(self, thing, external_network_id=None,
                           port_id=None, client=None):
        """Create a floating IP and associates to a resource/port on Neutron"""
        if not external_network_id:
            external_network_id = CONF.network.public_network_id
        if not client:
            client = self.os_primary.floating_ips_client
        if not port_id:
            port_id, ip4 = self._get_server_port_id_and_ip4(thing)
        else:
            ip4 = None
        result = client.create_floatingip(
            floating_network_id=external_network_id,
            port_id=port_id,
            tenant_id=thing['tenant_id'],
            fixed_ip_address=ip4
        )
        floating_ip = result['floatingip']
        self.addCleanup(test_utils.call_and_ignore_notfound_exc,
                        client.delete_floatingip,
                        floating_ip['id'])
        return floating_ip