# BareMetalHostProfile resource allows you to define how the storage
# devices and the operating system are provisioned and configured.
apiVersion: metal3.io/v1alpha1
metadata:
  namespace: default
  name: default-simple-since-2-24
  labels:
    kaas.mirantis.com/defaultBMHProfile: 'true'
kind: BareMetalHostProfile
spec:
  # List of definitions of the physical storage devices. To configure more
  # storage devices per host, add additional devices to this list.
  # Each section in the list allows you to define disk parameters and
  # restrictions in the 'device' field, and a list of partitions to be
  # created on the device in the 'paritions' field.
  devices:
    # Define configuration of the first device on the host. This device
    # will be partitioned and used as a system boot device. Minimal size
    # for this device is 60Gib. If your device is smaller, change
    # the 'minSize' parameter in the device definition appropriately.
    # Use of a system device smaller than 60Gib is not recommended.
    - device:
        # Use the appropriate name of the device in the system. '/dev/sda'
        # typically defines the first device on a system with 2 disks.
        #byName: /dev/sda
        minSize: 60Gi
        # Deprecated. 'wipe' field, if set to 'true', forces the Container Cloud
        # bare metal provisioning system to erase the contents of the device before using it.
        #wipe: true
        wipeDevice:
          eraseMetadata:
            enabled: true
        #  eraseDevice:
        #    timeout: 3600
        #    blkdiscard:
        #      enabled: false
        #      zeroout: "fallback"
        #    userDefined:
        #      enabled: false
        #      command: ""
        #      script: ""
      # Do not change the names of partitions in this section.
      # They are defined as expected by the Ubuntu operating system that
      # will be installed.
      partitions:
        - name: bios_grub
          # 4Mb boot partition is required for legacy (non-UEFI) systems.
          size: 4Mi
          partflags: ['bios_grub']
        - name: uefi
          partflags: ['esp']
          size: 200Mi
        - name: config-2
          # Size of this partition is limited to 64Mb.
          size: 64Mi
        - name: lvm_root_part
          # The 0 size for the partition means that this partition will
          # use all remaining space on the device. Change it only if
          # you want to have a root file system of specific size.
          # WARNING: only last one partition on disk could be set as "0" size.
          size: 0
    # Define configuration of the second device on the host. This device
    # will be used to store application data for management services of
    # Container Cloud.
    # The application data is stored in directories on this device,
    # mounted as volumes to the application pods.
    - device:
        # Use the appropriate name of the device in the system. Typically,
        # '/dev/sdb' defines the second device on a system with 3 disks.
        #byName: /dev/sdb
        minSize: 30Gi
        # Deprecated. 'wipe' field, if set to 'true', forces the Container Cloud
        # bare metal provisioning system to erase the contents of the  device before using it.
        #wipe: true
        wipeDevice:
          eraseMetadata:
            enabled: true
        #  eraseDevice:
        #    timeout: 3600
        #    blkdiscard:
        #      enabled: false
        #      zeroout: "fallback"
        #    userDefined:
        #      enabled: false
        #      command: ""
        #      script: ""
      # This device is partitioned for use by local volume provisioner.
      partitions:
        - name: lvm_lvp_part
          # The 0 size for the partition means that this partition will
          # use all remaining space on the device.
          # WARNING: only last one partition on disk could be set as "0" size.
          size: 0
  volumeGroups:
    - name: lvm_root
      devices:
        - partition: lvm_root_part
    - name: lvm_lvp
      devices:
        - partition: lvm_lvp_part
  logicalVolumes:
    - name: root
      vg: lvm_root
      # If you set the size to 0, the logical volume will use all available
      # space in its volume group.
      # WARNING: only last one partition on disk could be set as "0" size.
      size: 0
    - name: lvp
      vg: lvm_lvp
      # If you set the size to 0, the logical volume will use all available
      # space in its volume group.
      # WARNING: only last one partition on disk could be set as "0" size.
      size: 0
  fileSystems:
    - fileSystem: vfat
      partition: config-2
    - fileSystem: vfat
      partition: uefi
      mountPoint: /boot/efi
    - fileSystem: ext4
      logicalVolume: root
      mountPoint: /
    - fileSystem: ext4
      logicalVolume: lvp
      mountPoint: /mnt/local-volumes/
  preDeployScript: |
    #!/bin/bash -ex
    echo $(date) 'pre_deploy_script done' >> /root/pre_deploy_done
  postDeployScript: |
    #!/bin/bash -ex
    echo $(date) 'post_deploy_script done' >> /root/post_deploy_done
  grubConfig:
    defaultGrubOptions:
      - 'GRUB_DISABLE_RECOVERY="true"'
      - 'GRUB_PRELOAD_MODULES=lvm'
      - 'GRUB_TIMEOUT=20'
  # 'kernelParameters' section defines parameters of the operating system.
  # See comments for the individual options for more information.
  kernelParameters:
    sysctl:
      # Please check list of prohibited to change options:
      # https://docs.mirantis.com/mke/3.6/install/predeployment/set-up-kernel-default-protections.html
      # With this setting, kernel logs will be available only to the 'root'
      # user.
      kernel.dmesg_restrict: "1"
      # Controls whether core dumps will append the PID to the core filename
      # useful for debugging multi-threaded applications.
      kernel.core_uses_pid: "1"
      # Increase system file descriptor limit up to
      # 9223372036854775807 (0x7fffffffffffffff) on a 64-bit system.
      # Linux kernel documentation suggests that inode-max should be 3-4 times
      # larger than this value.
      fs.file-max: "9223372036854775807"
      # The Linux kernel provides the Asynchronous non-blocking I/O (AIO) feature that allows a
      # process to initiate multiple I/O operations simultaneously without having to wait for any of them to complete.
      # This helps boost performance for applications that are able to overlap processing and I/O.
      fs.aio-max-nr: "1048576"
      # The inotify API provides a mechanism for monitoring file system events.
      # Inotify can be used to monitor individual files, or to monitor directories.
      # When a directory is monitored, inotify will return events for the directory itself, and for files inside the directory.
      fs.inotify.max_user_instances: "4096"
      # This file contains the maximum number of memory map areas a process may have.
      # Memory map areas are used as a side-effect of calling malloc, directly by mmap and mprotect, and also when loading shared libraries.
      # While most applications need less than a thousand maps, certain programs,
      # particularly malloc debuggers, may consume lots of them, e.g., up to one or two maps per allocation.
      vm.max_map_count: "262144"
      # This option enables "Loose mode" assymetric-routing between k8s-lcm (LCM network) and bond0 (PXE network).
      # Required only during bootstrap process, since bootstrap-seed node might not
      # contain all required networks. (For example, when only pxe network configured on seed node)
      # For details, see
      # https://docs.mirantis.com/container-cloud/latest/deployment-guide/deploy-bm-mgmt.html
      net.ipv4.conf.all.rp_filter: "2"
      net.ipv4.conf.k8s-lcm.rp_filter: "2"
      net.ipv4.conf.bond0.rp_filter: "2"
      fs.inotify.max_user_watches: "81920"
    # 'modules' field contains a list of files to be created in the
    # '/etc/modprobe.d/' directory and the contents of the files.
    # Use them to configure specific kernel modules on your system.
    #modules:
    #  - filename: kvm_intel.conf
    #    content: |
    #      options kvm_intel nested=1