diff --git a/tcp_tests/templates/virtual-mcp11-k8s-contrail/common-services.yaml b/tcp_tests/templates/virtual-mcp11-k8s-contrail/common-services.yaml
index a2c1e73..a637ebf 100644
--- a/tcp_tests/templates/virtual-mcp11-k8s-contrail/common-services.yaml
+++ b/tcp_tests/templates/virtual-mcp11-k8s-contrail/common-services.yaml
@@ -7,6 +7,27 @@
   retry: {count: 1, delay: 10}
   skip_fail: true
 
+- description: Install glusterfs
+  cmd: salt --hard-crash --state-output=mixed --state-verbose=False
+    -C 'I@glusterfs:server' state.sls glusterfs.server.service
+  node_name: {{ HOSTNAME_CFG01 }}
+  retry: {count: 1, delay: 5}
+  skip_fail: false
+
+- description: Setup glusterfs on primary controller
+  cmd: salt --hard-crash --state-output=mixed --state-verbose=False
+    -C 'I@glusterfs:server' state.sls glusterfs.server.setup -b 1
+  node_name: {{ HOSTNAME_CFG01 }}
+  retry: {count: 1, delay: 5}
+  skip_fail: false
+
+- description: Check the gluster status
+  cmd: salt --hard-crash --state-output=mixed --state-verbose=False
+    -C 'I@glusterfs:server' cmd.run 'gluster peer status; gluster volume status' -b 1
+  node_name: {{ HOSTNAME_CFG01 }}
+  retry: {count: 1, delay: 5}
+  skip_fail: false
+
 - description:  Install keepalived
   cmd: salt --hard-crash --state-output=mixed --state-verbose=False
     -C 'I@keepalived:cluster' state.sls keepalived -b 1
@@ -14,16 +35,6 @@
   retry: {count: 1, delay: 10}
   skip_fail: true
 
-- description: Check the VIP
-  cmd: |
-    OPENSTACK_CONTROL_ADDRESS=`salt-call --out=newline_values_only pillar.get _param:openstack_control_address`;
-    echo "_param:openstack_control_address (vip): ${OPENSTACK_CONTROL_ADDRESS}";
-    salt --hard-crash --state-output=mixed --state-verbose=False -C 'I@keepalived:cluster' cmd.run "ip a | grep ${OPENSTACK_CONTROL_ADDRESS}" | grep -B1 ${OPENSTACK_CONTROL_ADDRESS}
-  node_name: {{ HOSTNAME_CFG01 }}
-  retry: {count: 1, delay: 5}
-  skip_fail: false
-
-
 - description: Install haproxy
   cmd: salt --hard-crash --state-output=mixed --state-verbose=False
     -C 'I@haproxy:proxy' state.sls haproxy
@@ -66,47 +77,103 @@
   retry: {count: 1, delay: 5}
   skip_fail: false
 
-- description: Install Kubernetes and Calico
+- description: Install k8s
   cmd: salt --hard-crash --state-output=mixed --state-verbose=False
      -C 'I@kubernetes:master' state.sls kubernetes.master.kube-addons;
      salt --hard-crash --state-output=mixed --state-verbose=False -C 'I@kubernetes:pool' state.sls kubernetes.pool;
-     salt --hard-crash --state-output=mixed --state-verbose=False -C 'I@kubernetes:pool' cmd.run 'calicoctl node status';
   node_name: {{ HOSTNAME_CFG01 }}
   retry: {count: 1, delay: 5}
   skip_fail: false
 
-- description: Setup NAT for Calico
+- description: Setup etcd server
   cmd: salt --hard-crash --state-output=mixed --state-verbose=False
-    -C 'I@etcd:server' --subset 1 state.sls etcd.server.setup
+     -C 'I@kubernetes:master and *01*' state.sls etcd.server.setup;
   node_name: {{ HOSTNAME_CFG01 }}
   retry: {count: 1, delay: 5}
   skip_fail: false
 
-- description: Run whole master to check consistency
+- description: Run master without setup
   cmd: salt --hard-crash --state-output=mixed --state-verbose=False
      -C 'I@kubernetes:master' state.sls kubernetes exclude=kubernetes.master.setup
   node_name: {{ HOSTNAME_CFG01 }}
   retry: {count: 1, delay: 5}
   skip_fail: true
 
-
-- description: Register addons
+- description: Run master setup
   cmd: salt --hard-crash --state-output=mixed --state-verbose=False
-    -C 'I@kubernetes:master' --subset 1 state.sls kubernetes.master.setup
+     -C 'I@kubernetes:master and *01*' state.sls kubernetes.master.setup
+  node_name: {{ HOSTNAME_CFG01 }}
+  retry: {count: 1, delay: 5}
+  skip_fail: true
+
+- description: Restart kubelet
+  cmd: salt --hard-crash --state-output=mixed --state-verbose=False
+    -C 'I@kubernetes:pool' service.restart kubelet
   node_name: {{ HOSTNAME_CFG01 }}
   retry: {count: 1, delay: 5}
   skip_fail: false
 
-- description: Install contrail
+# install contrail
+- description: Install contrail db
   cmd: salt --hard-crash --state-output=mixed --state-verbose=False
-    -C 'I@opencontrail:compute' state.sls opencontrail
+    -C 'I@opencontrail:database' state.sls opencontrail.database
+  node_name: {{ HOSTNAME_CFG01 }}
+  retry: {count: 2, delay: 20}
+  skip_fail: false
+
+- description: Install contrail control
+  cmd: salt --hard-crash --state-output=mixed --state-verbose=False
+    -C 'I@opencontrail:control' state.sls opencontrail
   node_name: {{ HOSTNAME_CFG01 }}
   retry: {count: 1, delay: 5}
   skip_fail: false
 
-- description: Reboot computes
+- description: Install contrail control with exclude client on node 1
   cmd: salt --hard-crash --state-output=mixed --state-verbose=False
-    -C 'I@opencontrail:compute' system.reboot
+    -C 'I@opencontrail:control and *01*' state.sls opencontrail exclude=opencontrail.client
+  node_name: {{ HOSTNAME_CFG01 }}
+  retry: {count: 1, delay: 5}
+  skip_fail: false
+
+- description: Install contrail control with exclude client on all nodes
+  cmd: salt --hard-crash --state-output=mixed --state-verbose=Falsa
+    -C 'I@opencontrail:control' state.sls opencontrail exclude=opencontrail.client
+  node_name: {{ HOSTNAME_CFG01 }}
+  retry: {count: 1, delay: 5}
+  skip_fail: false
+
+- description: Install contrail collector without contrail client
+  cmd: salt --hard-crash --state-output=mixed --state-verbose=False
+    -C 'I@opencontrail:collector' state.sls opencontrail exclude=opencontrail.client
+  node_name: {{ HOSTNAME_CFG01 }}
+  retry: {count: 1, delay: 5}
+  skip_fail: false
+
+- description: Check contrail status
+  cmd: salt --hard-crash --state-output=mixed --state-verbose=False
+    -C 'I@opencontrail:control' cmd.run contrail-status
+  node_name: {{ HOSTNAME_CFG01 }}
+  retry: {count: 1, delay: 5}
+  skip_fail: false
+
+# install contrail computes
+- description: Configure contrail
+  cmd: salt --hard-crash --state-output=mixed --state-verbose=False
+    -C 'I@opencontrail:database:id:1' state.sls opencontrail.client
+  node_name: {{ HOSTNAME_CFG01 }}
+  retry: {count: 1, delay: 5}
+  skip_fail: false
+
+- description: Provision vrouter
+  cmd: salt --hard-crash --state-output=mixed --state-verbose=False
+    -C 'I@nova:compute' cmd.run 'exec 0>&-; exec 1>&-; exec 2>&-; nohup bash -c "ip link | grep vhost && echo no_reboot || sleep 5 && reboot & "'
+  node_name: {{ HOSTNAME_CFG01 }}
+  retry: {count: 1, delay: 5}
+  skip_fail: false
+
+- description: Compute contrail client on cmp
+  cmd: slepp 300; salt --hard-crash --state-output=mixed --state-verbose=False
+    -C 'I@opencontrail:compute' state.sls opencontrail.client
   node_name: {{ HOSTNAME_CFG01 }}
   retry: {count: 1, delay: 5}
   skip_fail: false
diff --git a/tcp_tests/templates/virtual-mcp11-k8s-contrail/salt.yaml b/tcp_tests/templates/virtual-mcp11-k8s-contrail/salt.yaml
index 442668b..535d378 100644
--- a/tcp_tests/templates/virtual-mcp11-k8s-contrail/salt.yaml
+++ b/tcp_tests/templates/virtual-mcp11-k8s-contrail/salt.yaml
@@ -17,35 +17,9 @@
 {% set IPV4_NET_ADMIN_PREFIX = '.'.join(IPV4_NET_ADMIN.split('.')[0:3]) %}
 {% set IPV4_NET_CONTROL_PREFIX = '.'.join(IPV4_NET_CONTROL.split('.')[0:3]) %}
 
-- description: Configure repository on the cfg01 node
-  cmd:
-    echo "172.18.248.114    jenkins.mcp.mirantis.net  gerrit.mcp.mirantis.net" >> /etc/hosts;
-    echo "185.135.196.10    apt-mk.mirantis.com" >> /etc/hosts;
-    echo "nameserver 172.18.208.44" >> /etc/resolv.conf;
-    echo "nameserver 8.8.8.8" >> /etc/resolv.conf;
-    which wget >/dev/null || (apt-get update; apt-get install -y wget);
-    echo "deb [arch=amd64] http://apt-mk.mirantis.com/xenial nightly salt extra" > /etc/apt/sources.list.d/mcp_salt.list;
-    wget -O - http://apt-mk.mirantis.com/public.gpg | apt-key add -;
-    echo "deb http://repo.saltstack.com/apt/ubuntu/16.04/amd64/2016.3 xenial main" > /etc/apt/sources.list.d/saltstack.list;
-    wget -O - https://repo.saltstack.com/apt/ubuntu/16.04/amd64/2016.3/SALTSTACK-GPG-KEY.pub | apt-key add -;
-  node_name: {{ HOSTNAME_CFG01 }}
-  retry: {count: 1, delay: 1}
-  skip_fail: false
-
-- description: Update packages on cfg01
-  cmd: apt-get clean; apt-get update
-  node_name: {{ HOSTNAME_CFG01 }}
-  retry: {count: 1, delay: 1}
-  skip_fail: false
-
+# Install salt to the config node
 - description: Installing salt master on cfg01
-  cmd:  eatmydata apt-get install -y reclass git salt-master
-  node_name: {{ HOSTNAME_CFG01 }}
-  retry: {count: 1, delay: 1}
-  skip_fail: false
-
-- description: Install common packages on cfg01
-  cmd: apt-get install -y python-pip wget curl tmux byobu iputils-ping traceroute htop tree
+  cmd:  apt-get install -y reclass git; apt-get install -y salt-master
   node_name: {{ HOSTNAME_CFG01 }}
   retry: {count: 1, delay: 1}
   skip_fail: false
@@ -84,15 +58,12 @@
   retry: {count: 1, delay: 1}
   skip_fail: false
 
-
 - description: Clone reclass models with submodules
   cmd: |
     ssh-keyscan -H github.com >> ~/.ssh/known_hosts;
     git clone -b {{ SALT_MODELS_COMMIT }} --recurse-submodules {{ SALT_MODELS_REPOSITORY }} /srv/salt/reclass;
+
     mkdir -p /srv/salt/reclass/classes/service;
-  node_name: {{ HOSTNAME_CFG01 }}
-  retry: {count: 1, delay: 1}
-  skip_fail: false
 
     # Replace firstly to an intermediate value to avoid intersection between
     # already replaced and replacing networks.
@@ -100,14 +71,13 @@
     # 192.168.10 -> 10.16.0 (generated network for admin)
     # 10.16.0 -> <external network>
     # So let's replace constant networks to the keywords, and then keywords to the desired networks.
-- description: Fix model
-  cmd: |
     find /srv/salt/reclass/ -type f -exec sed -i 's/192\.168\.10\./==IPV4_NET_ADMIN_PREFIX==/g' {} +
     find /srv/salt/reclass/ -type f -exec sed -i 's/172\.16\.10\./==IPV4_NET_CONTROL_PREFIX==/g' {} +
+
     find /srv/salt/reclass/ -type f -exec sed -i 's/==IPV4_NET_ADMIN_PREFIX==/{{ IPV4_NET_ADMIN_PREFIX }}./g' {} +
     find /srv/salt/reclass/ -type f -exec sed -i 's/==IPV4_NET_CONTROL_PREFIX==/{{ IPV4_NET_CONTROL_PREFIX }}./g' {} +
-    find /srv/salt/reclass/ -type f -exec sed -i 's/apt_mk_version:.*/apt_mk_version: {{ REPOSITORY_SUITE }}/g' {} +
 
+    find /srv/salt/reclass/ -type f -exec sed -i 's/apt_mk_version:.*/apt_mk_version: {{ REPOSITORY_SUITE }}/g' {} +
     # Disable checkouting the model from remote repository
     cat << 'EOF' >> /srv/salt/reclass/nodes/{{ HOSTNAME_CFG01 }}.yml
     parameters:
@@ -186,14 +156,12 @@
   skip_fail: false
 {% endfor %}
 
-
 - description: Accept salt keys from all the nodes
   cmd: salt-key -A -y
   node_name: {{ HOSTNAME_CFG01 }}
   retry: {count: 1, delay: 5}
   skip_fail: true
 
-
 - description: Configure salt adoptors on cfg01
   cmd: |
     ln -s /usr/lib/python2.7/dist-packages/reclass/adapters/salt.py /usr/local/sbin/reclass-salt;
@@ -202,7 +170,6 @@
   retry: {count: 1, delay: 1}
   skip_fail: false
 
-
 # Prepare salt services and nodes settings
 - description: Run 'linux' formula on cfg01
   cmd: salt --hard-crash --state-output=mixed --state-verbose=False
@@ -211,7 +178,6 @@
   retry: {count: 1, delay: 5}
   skip_fail: false
 
-
 - description: Run 'openssh' formula on cfg01
   cmd: salt --hard-crash --state-output=mixed --state-verbose=False
     -C 'I@salt:master' state.sls openssh;
@@ -222,7 +188,6 @@
   retry: {count: 3, delay: 5}
   skip_fail: false
 
-
 - description: '*Workaround* of the bug https://mirantis.jira.com/browse/PROD-7962'
   cmd: salt --hard-crash --state-output=mixed --state-verbose=False
     '*' cmd.run "echo '    StrictHostKeyChecking no' >> /root/.ssh/config"
@@ -279,37 +244,25 @@
 
 # Bootstrap all nodes
 
-- description: Configure linux on controllers
-  cmd: salt --hard-crash --state-output=mixed --state-verbose=False 'ctl*' state.sls
-    linux
+- description: Configure linux on other nodes
+  cmd: salt --hard-crash --state-output=mixed --state-verbose=False -C '* and not
+    cfg01*' state.sls linux
   node_name: {{ HOSTNAME_CFG01 }}
   retry: {count: 1, delay: 5}
   skip_fail: false
 
-- description: Configure linux on cmp
-  cmd: salt --hard-crash --state-output=mixed --state-verbose=False 'cmp*' state.sls
-    linux
-  node_name: {{ HOSTNAME_CFG01 }}
-  retry: {count: 3, delay: 20}
-  skip_fail: false
-
 - description: Configure openssh on all nodes
   cmd: salt --hard-crash --state-output=mixed --state-verbose=False -C '* and not
-    cfg*' state.sls openssh;salt --hard-crash --state-output=mixed --state-verbose=False
+    cfg01*' state.sls openssh;salt --hard-crash --state-output=mixed --state-verbose=False
     -C '* and not cfg*' cmd.run "sed -i 's/PasswordAuthentication no/PasswordAuthentication
     yes/' /etc/ssh/sshd_config && service ssh restart"
   node_name: {{ HOSTNAME_CFG01 }}
   retry: {count: 1, delay: 5}
   skip_fail: false
 
-- description: Configure salt.minion on ctl
-  cmd: salt --hard-crash --state-output=mixed --state-verbose=False 'ctl*' state.sls salt.minion
-  node_name: {{ HOSTNAME_CFG01 }}
-  retry: {count: 3, delay: 5}
-  skip_fail: false
-
-- description: Configure salt.minion on cmp
-  cmd: salt --hard-crash --state-output=mixed --state-verbose=False 'cmp*' state.sls salt.minion
+- description: Configure salt.minion on other nodes
+  cmd: salt --hard-crash --state-output=mixed --state-verbose=False -C '* and not
+    cfg01*' state.sls salt.minion
   node_name: {{ HOSTNAME_CFG01 }}
   retry: {count: 3, delay: 5}
   skip_fail: false
diff --git a/tcp_tests/templates/virtual-mcp11-k8s-contrail/underlay--user-data-cfg01.yaml b/tcp_tests/templates/virtual-mcp11-k8s-contrail/underlay--user-data-cfg01.yaml
index 443e50c..479fd38 100644
--- a/tcp_tests/templates/virtual-mcp11-k8s-contrail/underlay--user-data-cfg01.yaml
+++ b/tcp_tests/templates/virtual-mcp11-k8s-contrail/underlay--user-data-cfg01.yaml
@@ -41,6 +41,27 @@
    - swapon /swapfile
    - echo "/swapfile   none    swap    defaults    0   0" >> /etc/fstab
 
+   ############## TCP Cloud cfg01 node ##################
+   #- sleep 120
+   - echo "Preparing base OS"
+
+   - echo "172.18.248.114    jenkins.mcp.mirantis.net  gerrit.mcp.mirantis.net" >> /etc/hosts;
+   - echo "185.135.196.10    apt-mk.mirantis.com" >> /etc/hosts;
+   - echo "nameserver 172.18.208.44 >> /etc/resolv.conf;
+   - echo "nameserver 8.8.8.8 >> /etc/resolv.conf;
+   - which wget >/dev/null || (apt-get update; apt-get install -y wget);
+
+   - echo "deb [arch=amd64] http://apt-mk.mirantis.com/xenial {{ REPOSITORY_SUITE }} salt extra" > /etc/apt/sources.list.d/mcp_salt.list;
+   - wget -O - http://apt-mk.mirantis.com/public.gpg | apt-key add -;
+   - echo "deb http://repo.saltstack.com/apt/ubuntu/16.04/amd64/2016.3 xenial main" > /etc/apt/sources.list.d/saltstack.list;
+   - wget -O - https://repo.saltstack.com/apt/ubuntu/16.04/amd64/2016.3/SALTSTACK-GPG-KEY.pub | apt-key add -;
+
+   - apt-get clean
+   - apt-get update
+
+   # Install common packages
+   - eatmydata apt-get install -y python-pip git curl tmux byobu iputils-ping traceroute htop tree
+
    ########################################################
    # Node is ready, allow SSH access
    - echo "Allow SSH access ..."
diff --git a/tcp_tests/templates/virtual-mcp11-k8s-contrail/underlay--user-data1604.yaml b/tcp_tests/templates/virtual-mcp11-k8s-contrail/underlay--user-data1604.yaml
index 1013571..757fb84 100644
--- a/tcp_tests/templates/virtual-mcp11-k8s-contrail/underlay--user-data1604.yaml
+++ b/tcp_tests/templates/virtual-mcp11-k8s-contrail/underlay--user-data1604.yaml
@@ -43,50 +43,28 @@
    - swapon /swapfile
    - echo "/swapfile   none    swap    defaults   0   0" >> /etc/fstab
 
-   ########################################################
-   # Node is ready, allow SSH access
-   - echo "Allow SSH access ..."
-   - sudo iptables -D INPUT -p tcp --dport 22 -j DROP
-   ########################################################
 
    ############## TCP Cloud cfg01 node ##################
    #- sleep 120
    - echo "Preparing base OS"
    - which wget >/dev/null || (apt-get update; apt-get install -y wget)
-   - echo "deb [arch=amd64] http://apt.tcpcloud.eu/nightly/ xenial main security extra tcp tcp-salt" > /etc/apt/sources.list
-   - wget -O - http://apt.tcpcloud.eu/public.gpg | apt-key add -
-   # saltstack repo is for minions that have the same version in the xenial and trusty (2016.3.3)
-   #- echo "deb http://repo.saltstack.com/apt/ubuntu/16.04/amd64/latest xenial main" > /etc/apt/sources.list.d/saltstack.list
-   #- wget -O - https://repo.saltstack.com/apt/ubuntu/16.04/amd64/latest/SALTSTACK-GPG-KEY.pub | apt-key add -
-   - echo "deb http://repo.saltstack.com/apt/ubuntu/16.04/amd64/2016.3 xenial main" > /etc/apt/sources.list.d/saltstack.list
-   - wget -O - https://repo.saltstack.com/apt/ubuntu/16.04/amd64/2016.3/SALTSTACK-GPG-KEY.pub | apt-key add -
+
+   - echo "deb [arch=amd64] http://apt-mk.mirantis.com/xenial {{ REPOSITORY_SUITE }} salt extra" > /etc/apt/sources.list.d/mcp_salt.list;
+   - wget -O - http://apt-mk.mirantis.com/public.gpg | apt-key add -;
+   - echo "deb http://repo.saltstack.com/apt/ubuntu/16.04/amd64/2016.3 xenial main" > /etc/apt/sources.list.d/saltstack.list;
+   - wget -O - https://repo.saltstack.com/apt/ubuntu/16.04/amd64/2016.3/SALTSTACK-GPG-KEY.pub | apt-key add -;
 
    - apt-get clean
-   - apt-get update
-   - apt-get -y upgrade
+   - eatmydata apt-get update && apt-get -y upgrade
 
    # Install common packages
-   - apt-get install -y python-pip git
-   - apt-get install -y curl tmux byobu iputils-ping traceroute htop tree
+   - eatmydata apt-get install -y python-pip git curl tmux byobu iputils-ping traceroute htop tree mc
 
-   - apt-get install -y salt-minion
-
-   # To be configured from inventory/fuel-devops by operator or autotests
-   - 'echo "id: {hostname}" >> /etc/salt/minion'
-   - 'echo "master: 192.168.10.100" >> /etc/salt/minion'
-
-   - echo "Restarting minion service with workarounds..."
-   - rm -f /etc/salt/pki/minion/minion_master.pub
-   - service salt-minion restart
-   - sleep 5
-   - rm -f /etc/salt/pki/minion/minion_master.pub
-   - service salt-minion restart
-
-   #- echo "Showing node metadata..."
-   #- salt-call pillar.data
-
-   #- echo "Running complete state ..."
-   #- salt-call state.sls linux,openssh,salt
+   ########################################################
+   # Node is ready, allow SSH access
+   - echo "Allow SSH access ..."
+   - sudo iptables -D INPUT -p tcp --dport 22 -j DROP
+   ########################################################
 
   write_files:
    - path: /etc/network/interfaces
@@ -95,4 +73,3 @@
           iface ens3 inet dhcp
           auto ens4
           iface ens4 inet dhcp
-