diff --git a/tcp_tests/templates/virtual-mcp10-contrail/common-services.yaml b/tcp_tests/templates/virtual-mcp10-contrail/common-services.yaml
new file mode 100644
index 0000000..a4534d4
--- /dev/null
+++ b/tcp_tests/templates/virtual-mcp10-contrail/common-services.yaml
@@ -0,0 +1,118 @@
+{% from 'virtual-mcp10-contrail/underlay.yaml' import HOSTNAME_CFG01 with context %}
+
+# Install support services
+- description: Install keepalived on ctl01
+  cmd: salt --hard-crash --state-output=mixed --state-verbose=False
+    -C 'I@keepalived:cluster and *01*' state.sls keepalived
+  node_name: {{ HOSTNAME_CFG01 }}
+  retry: {count: 1, delay: 10}
+  skip_fail: true
+
+- description: Install keepalived
+  cmd: salt --hard-crash --state-output=mixed --state-verbose=False
+    -C 'I@keepalived:cluster' state.sls keepalived
+  node_name: {{ HOSTNAME_CFG01 }}
+  retry: {count: 1, delay: 10}
+  skip_fail: true
+
+- description: Check the VIP
+  cmd: |
+    OPENSTACK_CONTROL_ADDRESS=`salt-call --out=newline_values_only pillar.get _param:openstack_control_address`;
+    echo "_param:openstack_control_address (vip): ${OPENSTACK_CONTROL_ADDRESS}";
+    salt --hard-crash --state-output=mixed --state-verbose=False -C 'I@keepalived:cluster' cmd.run "ip a | grep ${OPENSTACK_CONTROL_ADDRESS}" | grep -B1 ${OPENSTACK_CONTROL_ADDRESS}
+  node_name: {{ HOSTNAME_CFG01 }}
+  retry: {count: 1, delay: 5}
+  skip_fail: false
+
+
+- description: Install glusterfs
+  cmd: salt --hard-crash --state-output=mixed --state-verbose=False
+    -C 'I@glusterfs:server' state.sls glusterfs.server.service
+  node_name: {{ HOSTNAME_CFG01 }}
+  retry: {count: 1, delay: 5}
+  skip_fail: false
+
+- description: Setup glusterfs on primary controller
+  cmd: salt --hard-crash --state-output=mixed --state-verbose=False
+    -C 'I@glusterfs:server' state.sls glusterfs.server.setup -b 1
+  node_name: {{ HOSTNAME_CFG01 }}
+  retry: {count: 1, delay: 5}
+  skip_fail: false
+
+- description: Check the gluster status
+  cmd: salt --hard-crash --state-output=mixed --state-verbose=False
+    -C 'I@glusterfs:server' cmd.run 'gluster peer status; gluster volume status' -b 1
+  node_name: {{ HOSTNAME_CFG01 }}
+  retry: {count: 1, delay: 5}
+  skip_fail: false
+
+- description: Install RabbitMQ on ctl01
+  cmd: salt --hard-crash --state-output=mixed --state-verbose=False
+    -C 'I@rabbitmq:server and *01*' state.sls rabbitmq
+  node_name: {{ HOSTNAME_CFG01 }}
+  retry: {count: 1, delay: 5}
+  skip_fail: false
+
+- description: Install RabbitMQ
+  cmd: salt --hard-crash --state-output=mixed --state-verbose=False
+    -C 'I@rabbitmq:server' state.sls rabbitmq
+  node_name: {{ HOSTNAME_CFG01 }}
+  retry: {count: 1, delay: 5}
+  skip_fail: false
+
+- description: Check the rabbitmq status
+  cmd: salt --hard-crash --state-output=mixed --state-verbose=False
+    -C 'I@rabbitmq:server' cmd.run 'rabbitmqctl cluster_status'
+  node_name: {{ HOSTNAME_CFG01 }}
+  retry: {count: 1, delay: 5}
+  skip_fail: false
+
+- description: Install Galera on first server
+  cmd: salt --hard-crash --state-output=mixed --state-verbose=False
+    -C 'I@galera:master' state.sls galera
+  node_name: {{ HOSTNAME_CFG01 }}
+  retry: {count: 1, delay: 5}
+  skip_fail: false
+
+- description: Install Galera on other servers
+  cmd: salt --hard-crash --state-output=mixed --state-verbose=False
+    -C 'I@galera:slave' state.sls galera
+  node_name: {{ HOSTNAME_CFG01 }}
+  retry: {count: 1, delay: 5}
+  skip_fail: false
+
+- description: Check mysql status
+  cmd: salt --hard-crash --state-output=mixed --state-verbose=False
+    -C 'I@galera:*' mysql.status | grep -A1 -e "wsrep_incoming_addresses\|wsrep_cluster_size"
+  node_name: {{ HOSTNAME_CFG01 }}
+  retry: {count: 1, delay: 5}
+  skip_fail: true
+
+
+- description: Install haproxy
+  cmd: salt --hard-crash --state-output=mixed --state-verbose=False
+    -C 'I@haproxy:proxy' state.sls haproxy
+  node_name: {{ HOSTNAME_CFG01 }}
+  retry: {count: 1, delay: 5}
+  skip_fail: false
+
+- description: Check haproxy status
+  cmd: salt --hard-crash --state-output=mixed --state-verbose=False
+    -C 'I@haproxy:proxy' service.status haproxy
+  node_name: {{ HOSTNAME_CFG01 }}
+  retry: {count: 1, delay: 5}
+  skip_fail: false
+
+- description: Restart rsyslog
+  cmd: salt --hard-crash --state-output=mixed --state-verbose=False
+    -C 'I@haproxy:proxy' service.restart rsyslog
+  node_name: {{ HOSTNAME_CFG01 }}
+  retry: {count: 1, delay: 5}
+  skip_fail: false
+
+- description: Install memcached on all controllers
+  cmd: salt --hard-crash --state-output=mixed --state-verbose=False
+    -C 'I@memcached:server' state.sls memcached
+  node_name: {{ HOSTNAME_CFG01 }}
+  retry: {count: 1, delay: 5}
+  skip_fail: false
diff --git a/tcp_tests/templates/virtual-mcp10-contrail/openstack.yaml b/tcp_tests/templates/virtual-mcp10-contrail/openstack.yaml
new file mode 100644
index 0000000..caec895
--- /dev/null
+++ b/tcp_tests/templates/virtual-mcp10-contrail/openstack.yaml
@@ -0,0 +1,227 @@
+{% from 'virtual-mcp10-contrail/underlay.yaml' import HOSTNAME_CFG01 with context %}
+
+# Install OpenStack control services
+
+- description: Install glance on all controllers
+  cmd: salt --hard-crash --state-output=mixed --state-verbose=False \
+     -C 'I@glance:server' state.sls glance -b 1
+  node_name: {{ HOSTNAME_CFG01 }}
+  retry: {count: 1, delay: 5}
+  skip_fail: false
+
+- description: Install keystone service (note that different fernet keys are created on different nodes)
+  cmd: salt --hard-crash --state-output=mixed --state-verbose=False \
+    -C 'I@keystone:server' state.sls keystone.server -b 1
+  node_name: {{ HOSTNAME_CFG01 }}
+  retry: {count: 2, delay: 15}
+  skip_fail: false
+
+- description: Restart apache due to PROD-10477
+  cmd: salt --hard-crash --state-output=mixed --state-verbose=False 'ctl*' cmd.run "systemctl restart apache2"
+  node_name: {{ HOSTNAME_CFG01 }}
+  retry: {count: 1, delay: 15}
+  skip_fail: false
+
+- description: Check apache status to PROD-10477
+  cmd: salt --hard-crash --state-output=mixed --state-verbose=False 'ctl*' cmd.run "systemctl status apache2"
+  node_name: {{ HOSTNAME_CFG01 }}
+  retry: {count: 1, delay: 15}
+  skip_fail: false
+
+- description: Mount glusterfs.client volumes (resuires created 'keystone' and 'glusterfs' system users)
+  cmd: salt --hard-crash --state-output=mixed --state-verbose=False \
+    -C 'I@glance:server' state.sls glusterfs.client
+  node_name: {{ HOSTNAME_CFG01 }}
+  retry: {count: 1, delay: 5}
+  skip_fail: false
+
+- description: Update fernet keys for keystone server on the mounted glusterfs volume
+  cmd: salt --hard-crash --state-output=mixed --state-verbose=False \
+    -C 'I@keystone:server' state.sls keystone.server -b 1
+  node_name: {{ HOSTNAME_CFG01 }}
+  retry: {count: 1, delay: 5}
+  skip_fail: false
+
+- description: Populate keystone services/tenants/admins
+  cmd: salt --hard-crash --state-output=mixed --state-verbose=False \
+    -C 'I@keystone:client' state.sls keystone.client
+  node_name: {{ HOSTNAME_CFG01 }}
+  retry: {count: 1, delay: 5}
+  skip_fail: false
+
+- description: Check keystone service-list
+  cmd: salt --hard-crash --state-output=mixed --state-verbose=False \
+    -C 'I@keystone:server' cmd.run '. /root/keystonerc; openstack service list'
+  node_name: {{ HOSTNAME_CFG01 }}
+  retry: {count: 1, delay: 5}
+  skip_fail: false
+
+- description: Check glance image-list
+  cmd: salt --hard-crash --state-output=mixed --state-verbose=False \
+    -C 'I@keystone:server' cmd.run '. /root/keystonerc; glance image-list'
+  node_name: {{ HOSTNAME_CFG01 }}
+  retry: {count: 1, delay: 5}
+  skip_fail: false
+
+
+- description: Install nova on all controllers
+  cmd: salt --hard-crash --state-output=mixed --state-verbose=False \
+    -C 'I@nova:controller' state.sls nova -b 1
+  node_name: {{ HOSTNAME_CFG01 }}
+  retry: {count: 2, delay: 5}
+  skip_fail: false
+
+- description: Check nova service-list
+  cmd: salt --hard-crash --state-output=mixed --state-verbose=False \
+    -C 'I@keystone:server' cmd.run '. /root/keystonerc; nova service-list'
+  node_name: {{ HOSTNAME_CFG01 }}
+  retry: {count: 1, delay: 5}
+  skip_fail: false
+
+
+- description: Install cinder
+  cmd: salt --hard-crash --state-output=mixed --state-verbose=False \
+    -C 'I@cinder:controller' state.sls cinder -b 1
+  node_name: {{ HOSTNAME_CFG01 }}
+  retry: {count: 1, delay: 5}
+  skip_fail: false
+
+- description: Check cinder list
+  cmd: salt --hard-crash --state-output=mixed --state-verbose=False \
+    -C 'I@keystone:server' cmd.run '. /root/keystonerc; cinder list'
+  node_name: {{ HOSTNAME_CFG01 }}
+  retry: {count: 1, delay: 5}
+  skip_fail: false
+
+
+- description: Install neutron service
+  cmd: salt --hard-crash --state-output=mixed --state-verbose=False \
+    -C 'I@neutron:server' state.sls neutron -b 1
+  node_name: {{ HOSTNAME_CFG01 }}
+  retry: {count: 1, delay: 5}
+  skip_fail: false
+
+#
+#- description: Install neutron on gtw node
+#  cmd: salt --hard-crash --state-output=mixed --state-verbose=False
+#    -C 'I@neutron:gateway' state.sls neutron
+#  node_name: {{ HOSTNAME_CFG01 }}
+#  retry: {count: 1, delay: 5}
+#  skip_fail: false
+
+
+#- description: Check neutron agent-list
+#  cmd: salt --hard-crash --state-output=mixed --state-verbose=False
+#    -C 'I@keystone:server' cmd.run '. /root/keystonerc; neutron agent-list'
+#  node_name: {{ HOSTNAME_CFG01 }}
+#  retry: {count: 1, delay: 5}
+#  skip_fail: false
+
+# install contrail
+- description: Install contrail db
+  cmd: salt --hard-crash --state-output=mixed --state-verbose=False \
+    -C 'I@opencontrail:database' state.sls opencontrail.database
+  node_name: {{ HOSTNAME_CFG01 }}
+  retry: {count: 2, delay: 20}
+  skip_fail: false
+
+- description: Install contrail on 1st node and skip client part
+  cmd: salt --hard-crash --state-output=mixed --state-verbose=False
+    -C 'I@opencontrail:control and *01*' state.sls opencontrail exclude=opencontrail.client
+  node_name: {{ HOSTNAME_CFG01 }}
+  retry: {count: 3, delay: 5}
+  skip_fail: false
+
+- description: Install contrail on all nodes still skipping client
+  cmd: salt --hard-crash --state-output=mixed --state-verbose=Falsa
+    -C 'I@opencontrail:control' state.sls opencontrail exclude=opencontrail.client
+  node_name: {{ HOSTNAME_CFG01 }}
+  retry: {count: 2, delay: 5}
+  skip_fail: false
+
+- description: Install contrail and do client part as well
+  cmd: salt --hard-crash --state-output=mixed --state-verbose=False
+    -C 'I@opencontrail:control' state.sls opencontrail
+  node_name: {{ HOSTNAME_CFG01 }}
+  retry: {count: 1, delay: 5}
+  skip_fail: false
+
+- description: Configure contrail
+  cmd: salt --hard-crash --state-output=mixed --state-verbose=False
+    -C 'I@opencontrail:database:id:1' state.sls opencontrail.client
+  node_name: {{ HOSTNAME_CFG01 }}
+  retry: {count: 1, delay: 5}
+  skip_fail: false
+
+- description: Check contrail status
+  cmd: salt --hard-crash --state-output=mixed --state-verbose=False
+    -C 'I@opencontrail:control' cmd.run contrail-status
+  node_name: {{ HOSTNAME_CFG01 }}
+  retry: {count: 1, delay: 5}
+  skip_fail: false
+
+- description: Install heat service
+  cmd: salt --hard-crash --state-output=mixed --state-verbose=False \
+    -C 'I@heat:server' state.sls heat -b 1
+  node_name: {{ HOSTNAME_CFG01 }}
+  retry: {count: 1, delay: 5}
+  skip_fail: false
+
+- description: Check heat service
+  cmd: salt --hard-crash --state-output=mixed --state-verbose=False \
+    -C 'I@keystone:server' cmd.run '. /root/keystonerc; heat resource-type-list'
+  node_name: {{ HOSTNAME_CFG01 }}
+  retry: {count: 1, delay: 5}
+  skip_fail: false
+
+
+- description: Deploy horizon dashboard
+  cmd: salt --hard-crash --state-output=mixed --state-verbose=False \
+    -C 'I@horizon:server' state.sls horizon
+  node_name: {{ HOSTNAME_CFG01 }}
+  retry: {count: 1, delay: 5}
+  skip_fail: true
+
+- description: Deploy nginx proxy
+  cmd: salt --hard-crash --state-output=mixed --state-verbose=False \
+    -C 'I@nginx:server' state.sls nginx
+  node_name: {{ HOSTNAME_CFG01 }}
+  retry: {count: 1, delay: 5}
+  skip_fail: true
+
+
+# Install compute node
+
+- description: Apply formulas for compute node
+  cmd: salt --hard-crash --state-output=mixed --state-verbose=False 'cmp*' state.apply
+  node_name: {{ HOSTNAME_CFG01 }}
+  retry: {count: 1, delay: 5}
+  skip_fail: true
+
+- description: Re-apply(as in doc) formulas for compute node
+  cmd: salt --hard-crash --state-output=mixed --state-verbose=False 'cmp*' state.apply
+  node_name: {{ HOSTNAME_CFG01 }}
+  retry: {count: 1, delay: 5}
+  skip_fail: true
+
+- description: Check IP on computes
+  cmd: salt --hard-crash --state-output=mixed --state-verbose=False 'cmp*' cmd.run
+    'ip a'
+  node_name: {{ HOSTNAME_CFG01 }}
+  retry: {count: 10, delay: 30}
+  skip_fail: false
+
+
+- description: Provision vrouter
+  cmd: salt --hard-crash --state-output=mixed --state-verbose=False
+    -C 'I@nova:compute' cmd.run 'exec 0>&-; exec 1>&-; exec 2>&-; nohup bash -c "ip link | grep vhost && echo no_reboot || sleep 5 && reboot & "'
+  node_name: {{ HOSTNAME_CFG01 }}
+  retry: {count: 1, delay: 5}
+  skip_fail: false
+
+- description: contrail client on cmp
+  cmd: sleep 300; salt --hard-crash --state-output=mixed --state-verbose=False
+    -C 'I@opencontrail:compute' state.sls opencontrail.client
+  node_name: {{ HOSTNAME_CFG01 }}
+  retry: {count: 1, delay: 5}
+  skip_fail: false
diff --git a/tcp_tests/templates/virtual-mcp10-contrail/salt.yaml b/tcp_tests/templates/virtual-mcp10-contrail/salt.yaml
new file mode 100644
index 0000000..7acb986
--- /dev/null
+++ b/tcp_tests/templates/virtual-mcp10-contrail/salt.yaml
@@ -0,0 +1,333 @@
+{% from 'virtual-mcp10-contrail/underlay.yaml' import HOSTNAME_CFG01 with context %}
+{% from 'virtual-mcp10-contrail/underlay.yaml' import REPOSITORY_SUITE with context %}
+
+{% set SALT_MODELS_REPOSITORY = os_env('SALT_MODELS_REPOSITORY','https://gerrit.mcp.mirantis.net/salt-models/mcp-virtual-lab') %}
+{% set SALT_MODELS_COMMIT = os_env('SALT_MODELS_COMMIT','master') %}
+
+# Address pools for reclass cluster model are taken in the following order:
+# 1. environment variables,
+# 2. config.underlay.address_pools based on fuel-devops address pools
+#    (see generated '.ini' file after underlay is created),
+# 3. defaults
+{% set address_pools = config.underlay.address_pools %}
+{% set IPV4_NET_ADMIN = os_env('IPV4_NET_ADMIN', address_pools.get('admin-pool01', '192.168.10.0/24')) %}
+{% set IPV4_NET_CONTROL = os_env('IPV4_NET_CONTROL', address_pools.get('private-pool01', '172.16.10.0/24')) %}
+{% set IPV4_NET_TENANT = os_env('IPV4_NET_TENANT', address_pools.get('tenant-pool01', '10.1.0.0/24')) %}
+{% set IPV4_NET_EXTERNAL = os_env('IPV4_NET_EXTERNAL', address_pools.get('external-pool01', '10.16.0.0/24')) %}
+
+{% set IPV4_NET_ADMIN_PREFIX = '.'.join(IPV4_NET_ADMIN.split('.')[0:3]) %}
+{% set IPV4_NET_CONTROL_PREFIX = '.'.join(IPV4_NET_CONTROL.split('.')[0:3]) %}
+{% set IPV4_NET_TENANT_PREFIX = '.'.join(IPV4_NET_TENANT.split('.')[0:3]) %}
+{% set IPV4_NET_EXTERNAL_PREFIX = '.'.join(IPV4_NET_EXTERNAL.split('.')[0:3]) %}
+
+# Install salt to the config node
+
+#- description: (moved to cloud-init config) Configure repository on the cfg01 node
+#  cmd:
+#    echo "172.18.248.114    jenkins.mcp.mirantis.net  gerrit.mcp.mirantis.net" >> /etc/hosts;
+#    echo "185.135.196.10    apt-mk.mirantis.com" >> /etc/hosts;
+#    echo "nameserver 172.18.208.44 >> /etc/resolv.conf;
+#    echo "nameserver 8.8.8.8 >> /etc/resolv.conf;
+#    which wget >/dev/null || (apt-get update; apt-get install -y wget);
+#    echo "deb [arch=amd64] http://apt-mk.mirantis.com/xenial nightly salt extra" > /etc/apt/sources.list.d/mcp_salt.list;
+#    wget -O - http://apt-mk.mirantis.com/public.gpg | apt-key add -;
+#    echo "deb http://repo.saltstack.com/apt/ubuntu/16.04/amd64/2016.3 xenial main" > /etc/apt/sources.list.d/saltstack.list;
+#    wget -O - https://repo.saltstack.com/apt/ubuntu/16.04/amd64/2016.3/SALTSTACK-GPG-KEY.pub | apt-key add -;
+#  node_name: {{ HOSTNAME_CFG01 }}
+#  retry: {count: 1, delay: 1}
+#  skip_fail: false
+
+#- description: Update packages on cfg01
+#  cmd: apt-get clean; eatmydata apt-get update
+#  node_name: {{ HOSTNAME_CFG01 }}
+#  retry: {count: 1, delay: 1}
+#  skip_fail: false
+
+- description: Installing salt master on cfg01
+  cmd:  eatmydata apt-get install -y reclass git salt-master
+  node_name: {{ HOSTNAME_CFG01 }}
+  retry: {count: 1, delay: 1}
+  skip_fail: false
+
+#- description: (moved to cloud-init config) Install common packages on cfg01
+#  cmd: eatmydata apt-get install -y python-pip wget curl tmux byobu iputils-ping traceroute htop tree
+#  node_name: {{ HOSTNAME_CFG01 }}
+#  retry: {count: 1, delay: 1}
+#  skip_fail: false
+
+- description: Configure salt-master on cfg01
+  cmd: |
+    cat << 'EOF' >> /etc/salt/master.d/master.conf
+    file_roots:
+      base:
+      - /usr/share/salt-formulas/env
+    pillar_opts: False
+    open_mode: True
+    reclass: &reclass
+      storage_type: yaml_fs
+      inventory_base_uri: /srv/salt/reclass
+    ext_pillar:
+      - reclass: *reclass
+    master_tops:
+      reclass: *reclass
+    EOF
+  node_name: {{ HOSTNAME_CFG01 }}
+  retry: {count: 1, delay: 1}
+  skip_fail: false
+
+- description: Configure GIT settings and certificates
+  cmd: touch /root/.git_trusted_certs.pem;
+    for server in git.tcpcloud.eu github.com; do
+        openssl s_client -showcerts -connect $server:443 </dev/null
+        | openssl x509 -outform PEM
+        >> /root/.git_trusted_certs.pem;
+    done;
+    HOME=/root git config --global http.sslCAInfo /root/.git_trusted_certs.pem;
+    HOME=/root git config --global user.email "tcp-qa@example.com";
+    HOME=/root git config --global user.name "TCP QA";
+  node_name: {{ HOSTNAME_CFG01 }}
+  retry: {count: 1, delay: 1}
+  skip_fail: false
+
+
+- description: Clone reclass models with submodules
+  cmd: |
+    ssh-keyscan -H github.com >> ~/.ssh/known_hosts;
+    git clone -b {{ SALT_MODELS_COMMIT }} --recurse-submodules {{ SALT_MODELS_REPOSITORY }} /srv/salt/reclass;
+
+    mkdir -p /srv/salt/reclass/classes/service;
+
+    # Replace firstly to an intermediate value to avoid intersection between
+    # already replaced and replacing networks.
+    # For example, if generated IPV4_NET_ADMIN_PREFIX=10.16.0 , then there is a risk of replacing twice:
+    # 192.168.10 -> 10.16.0 (generated network for admin)
+    # 10.16.0 -> <external network>
+    # So let's replace constant networks to the keywords, and then keywords to the desired networks.
+    find /srv/salt/reclass/ -type f -exec sed -i 's/192\.168\.10\./==IPV4_NET_ADMIN_PREFIX==/g' {} +
+    find /srv/salt/reclass/ -type f -exec sed -i 's/172\.16\.10\./==IPV4_NET_CONTROL_PREFIX==/g' {} +
+    find /srv/salt/reclass/ -type f -exec sed -i 's/10\.1\.0\./==IPV4_NET_TENANT_PREFIX==/g' {} +
+    find /srv/salt/reclass/ -type f -exec sed -i 's/10\.16\.0\./==IPV4_NET_EXTERNAL_PREFIX==/g' {} +
+
+    find /srv/salt/reclass/ -type f -exec sed -i 's/==IPV4_NET_ADMIN_PREFIX==/{{ IPV4_NET_ADMIN_PREFIX }}./g' {} +
+    find /srv/salt/reclass/ -type f -exec sed -i 's/==IPV4_NET_CONTROL_PREFIX==/{{ IPV4_NET_CONTROL_PREFIX }}./g' {} +
+    find /srv/salt/reclass/ -type f -exec sed -i 's/==IPV4_NET_TENANT_PREFIX==/{{ IPV4_NET_TENANT_PREFIX }}./g' {} +
+    find /srv/salt/reclass/ -type f -exec sed -i 's/==IPV4_NET_EXTERNAL_PREFIX==/{{ IPV4_NET_EXTERNAL_PREFIX }}./g' {} +
+
+    find /srv/salt/reclass/ -type f -exec sed -i 's/apt_mk_version:.*/apt_mk_version: {{ REPOSITORY_SUITE }}/g' {} +
+
+    # Disable checkouting the model from remote repository
+    cat << 'EOF' >> /srv/salt/reclass/nodes/{{ HOSTNAME_CFG01 }}.yml
+    # local storage
+      reclass:
+        storage:
+          data_source:
+            engine: local
+    EOF
+
+    # Show the changes to the console
+    cd /srv/salt/reclass/; git diff
+  node_name: {{ HOSTNAME_CFG01 }}
+  retry: {count: 1, delay: 1}
+  skip_fail: false
+
+- description: Configure reclass
+  cmd: |
+    FORMULA_PATH=${FORMULA_PATH:-/usr/share/salt-formulas};
+    FORMULA_REPOSITORY=${FORMULA_REPOSITORY:-deb [arch=amd64] http://apt-mk.mirantis.com/xenial stable salt};
+    FORMULA_GPG=${FORMULA_GPG:-http://apt-mk.mirantis.com/public.gpg};
+    which wget > /dev/null || (apt-get update; apt-get install -y wget);
+    echo "${FORMULA_REPOSITORY}" > /etc/apt/sources.list.d/mcp_salt.list;
+    wget -O - "${FORMULA_GPG}" | apt-key add -;
+    apt-get clean; apt-get update;
+    [ ! -d /srv/salt/reclass/classes/service ] && mkdir -p /srv/salt/reclass/classes/service;
+    declare -a formula_services=("linux" "reclass" "salt" "openssh" "ntp" "git" "nginx" "collectd" "sensu" "heka" "sphinx" "keystone" "mysql" "grafana" "haproxy" "rsyslog" "horizon");
+    echo -e "\nInstalling all required salt formulas\n";
+    eatmydata apt-get install -y "${formula_services[@]/#/salt-formula-}";
+    for formula_service in "${formula_services[@]}"; do
+      echo -e "\nLink service metadata for formula ${formula_service} ...\n";
+      [ ! -L "/srv/salt/reclass/classes/service/${formula_service}" ] && ln -s ${FORMULA_PATH}/reclass/service/${formula_service} /srv/salt/reclass/classes/service/${formula_service};
+    done;
+    [ ! -d /srv/salt/env ] && mkdir -p /srv/salt/env;
+    [ ! -L /srv/salt/env/prd ] && ln -s ${FORMULA_PATH}/env /srv/salt/env/prd;
+    [ ! -d /etc/reclass ] && mkdir /etc/reclass;
+
+    cat << 'EOF' >> /etc/reclass/reclass-config.yml
+    storage_type: yaml_fs
+    pretty_print: True
+    output: yaml
+    inventory_base_uri: /srv/salt/reclass
+    EOF
+  node_name: {{ HOSTNAME_CFG01 }}
+  retry: {count: 1, delay: 1}
+  skip_fail: false
+
+- description: Restart salt-master service
+  cmd: |
+     systemctl restart salt-master;
+  node_name: {{ HOSTNAME_CFG01 }}
+  retry: {count: 1, delay: 5}
+  skip_fail: false
+
+{% for ssh in config.underlay.ssh %}
+- description: Configure salt-minion on {{ ssh['node_name'] }}
+  cmd: |
+    [ ! -d /etc/salt/minion.d ] && mkdir -p /etc/salt/minion.d;
+    cat << "EOF" >> /etc/salt/minion.d/minion.conf
+    id: {{ ssh['node_name'] }}
+    master: {{ config.salt.salt_master_host }}
+    EOF
+    eatmydata apt-get install -y salt-minion;
+    echo "Check for system info and metadata availability ...";
+    salt-call --no-color grains.items;
+    salt-call --no-color pillar.items;
+  node_name: {{ ssh['node_name'] }}
+  retry: {count: 1, delay: 1}
+  skip_fail: false
+{% endfor %}
+
+
+- description: Accept salt keys from all the nodes
+  cmd: salt-key -A -y
+  node_name: {{ HOSTNAME_CFG01 }}
+  retry: {count: 1, delay: 5}
+  skip_fail: true
+
+
+- description: Configure salt adoptors on cfg01
+  cmd: |
+    ln -s /usr/lib/python2.7/dist-packages/reclass/adapters/salt.py /usr/local/sbin/reclass-salt;
+    chmod +x /usr/lib/python2.7/dist-packages/reclass/adapters/salt.py
+  node_name: {{ HOSTNAME_CFG01 }}
+  retry: {count: 1, delay: 1}
+  skip_fail: false
+
+
+# Prepare salt services and nodes settings
+- description: Run 'linux' formula on cfg01
+  cmd: salt --hard-crash --state-output=mixed --state-verbose=False
+    -C 'I@salt:master' state.sls linux;
+  node_name: {{ HOSTNAME_CFG01 }}
+  retry: {count: 1, delay: 5}
+  skip_fail: false
+
+
+- description: Run 'openssh' formula on cfg01
+  cmd: salt --hard-crash --state-output=mixed --state-verbose=False
+    -C 'I@salt:master' state.sls openssh;
+    salt --hard-crash --state-output=mixed --state-verbose=False
+    -C 'I@salt:master' cmd.run "sed -i 's/PasswordAuthentication no/PasswordAuthentication
+    yes/' /etc/ssh/sshd_config && service ssh restart";
+  node_name: {{ HOSTNAME_CFG01 }}
+  retry: {count: 3, delay: 5}
+  skip_fail: false
+
+
+- description: '*Workaround* of the bug https://mirantis.jira.com/browse/PROD-7962'
+  cmd: salt --hard-crash --state-output=mixed --state-verbose=False
+    '*' cmd.run "echo '    StrictHostKeyChecking no' >> /root/.ssh/config"
+  node_name: {{ HOSTNAME_CFG01 }}
+  retry: {count: 1, delay: 1}
+  skip_fail: false
+
+- description: Run 'salt.master' formula on cfg01
+  cmd: timeout 120 salt --hard-crash --state-output=mixed --state-verbose=False
+    -C 'I@salt:master' state.sls salt.master.service;
+  node_name: {{ HOSTNAME_CFG01 }}
+  retry: {count: 2, delay: 5}
+  skip_fail: false
+
+- description: Run 'salt' formula on cfg01 with workaround proposed in PROD-10894
+  cmd: salt --hard-crash --state-output=mixed --state-verbose=False
+    -C 'I@salt:master' state.sls salt;
+    salt --hard-crash --state-output=mixed --state-verbose=False
+    -C 'I@salt:master' saltutil.sync_all
+  node_name: {{ HOSTNAME_CFG01 }}
+  retry: {count: 5, delay: 5}
+  skip_fail: false
+
+- description: Generate inventory for all the nodes to the /srv/salt/reclass/nodes/_generated
+  cmd: salt --hard-crash --state-output=mixed --state-verbose=False
+    -C 'I@salt:master' state.sls reclass
+  node_name: {{ HOSTNAME_CFG01 }}
+  retry: {count: 1, delay: 5}
+  skip_fail: false
+
+- description: Refresh pillars on all minions
+  cmd: salt --hard-crash --state-output=mixed --state-verbose=False '*' saltutil.refresh_pillar
+  node_name: {{ HOSTNAME_CFG01 }}
+  retry: {count: 1, delay: 5}
+  skip_fail: false
+
+- description: Sync all salt resources
+  cmd: salt --hard-crash --state-output=mixed --state-verbose=False '*' saltutil.sync_all
+  node_name: {{ HOSTNAME_CFG01 }}
+  retry: {count: 1, delay: 5}
+  skip_fail: false
+
+- description: Show  reclass-salt --top
+  cmd: reclass-salt --top
+  node_name: {{ HOSTNAME_CFG01 }}
+  retry: {count: 1, delay: 5}
+  skip_fail: false
+
+- description: Execute salt.minion.cert
+  cmd: salt-call --no-color state.sls salt.minion.cert -l info;
+  node_name: {{ HOSTNAME_CFG01 }}
+  retry: {count: 1, delay: 5}
+  skip_fail: false
+
+
+# Bootstrap all nodes
+
+- description: Configure linux on other nodes
+  cmd: salt --hard-crash --state-output=mixed --state-verbose=False -C '* and not
+    cfg01*' state.sls linux
+  node_name: {{ HOSTNAME_CFG01 }}
+  retry: {count: 1, delay: 5}
+  skip_fail: false
+
+- description: Configure openssh on all nodes
+  cmd: salt --hard-crash --state-output=mixed --state-verbose=False -C '* and not
+    cfg01*' state.sls openssh;salt --hard-crash --state-output=mixed --state-verbose=False
+    -C '* and not cfg*' cmd.run "sed -i 's/PasswordAuthentication no/PasswordAuthentication
+    yes/' /etc/ssh/sshd_config && service ssh restart"
+  node_name: {{ HOSTNAME_CFG01 }}
+  retry: {count: 1, delay: 5}
+  skip_fail: false
+
+- description: Configure salt.minion on other nodes
+  cmd: salt --hard-crash --state-output=mixed --state-verbose=False -C '* and not
+    cfg01*' state.sls salt.minion
+  node_name: {{ HOSTNAME_CFG01 }}
+  retry: {count: 3, delay: 5}
+  skip_fail: false
+
+- description: Check salt minion versions on slaves
+  cmd: salt '*' test.version
+  node_name: {{ HOSTNAME_CFG01 }}
+  retry: {count: 1, delay: 5}
+  skip_fail: false
+
+- description: Check salt top states on nodes
+  cmd: salt '*' state.show_top
+  node_name: {{ HOSTNAME_CFG01 }}
+  retry: {count: 1, delay: 5}
+  skip_fail: false
+
+- description: Configure ntp and rsyslog on nodes
+  cmd: salt --hard-crash --state-output=mixed --state-verbose=False '*' state.sls ntp,rsyslog
+  node_name: {{ HOSTNAME_CFG01 }}
+  retry: {count: 1, delay: 10}
+  skip_fail: false
+
+- description: Hack cmp01 node
+  cmd: salt 'cmp01*' cmd.run "ip addr del {{ IPV4_NET_CONTROL_PREFIX }}.105/24 dev ens4; ip addr flush dev ens4";
+  node_name: {{ HOSTNAME_CFG01 }}
+  retry: {count: 1, delay: 10}
+  skip_fail: false
+
+- description: Hack cmp02 node
+  cmd: salt 'cmp02*' cmd.run "ip addr del {{ IPV4_NET_CONTROL_PREFIX }}.106/24 dev ens4; ip addr flush dev ens4";
+  node_name: {{ HOSTNAME_CFG01 }}
+  retry: {count: 1, delay: 10}
+  skip_fail: false
diff --git a/tcp_tests/templates/virtual-mcp10-contrail/underlay--meta-data.yaml b/tcp_tests/templates/virtual-mcp10-contrail/underlay--meta-data.yaml
new file mode 100644
index 0000000..3699401
--- /dev/null
+++ b/tcp_tests/templates/virtual-mcp10-contrail/underlay--meta-data.yaml
@@ -0,0 +1,4 @@
+| # All the data below will be stored as a string object
+  instance-id: iid-local1
+  hostname: {hostname}
+  local-hostname: {hostname}
diff --git a/tcp_tests/templates/virtual-mcp10-contrail/underlay--user-data-cfg01.yaml b/tcp_tests/templates/virtual-mcp10-contrail/underlay--user-data-cfg01.yaml
new file mode 100644
index 0000000..437381b
--- /dev/null
+++ b/tcp_tests/templates/virtual-mcp10-contrail/underlay--user-data-cfg01.yaml
@@ -0,0 +1,118 @@
+| # All the data below will be stored as a string object
+  #cloud-config, see http://cloudinit.readthedocs.io/en/latest/topics/examples.html
+
+  ssh_pwauth: True
+  users:
+   - name: root
+     sudo: ALL=(ALL) NOPASSWD:ALL
+     shell: /bin/bash
+     ssh_authorized_keys:
+      - ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCp0evjOaK8c8SKYK4r2+0BN7g+8YSvQ2n8nFgOURCyvkJqOHi1qPGZmuN0CclYVdVuZiXbWw3VxRbSW3EH736VzgY1U0JmoTiSamzLHaWsXvEIW8VCi7boli539QJP0ikJiBaNAgZILyCrVPN+A6mfqtacs1KXdZ0zlMq1BPtFciR1JTCRcVs5vP2Wwz5QtY2jMIh3aiwkePjMTQPcfmh1TkOlxYu5IbQyZ3G1ahA0mNKI9a0dtF282av/F6pwB/N1R1nEZ/9VtcN2I1mf1NW/tTHEEcTzXYo1R/8K9vlqAN8QvvGLZtZduGviNVNoNWvoxaXxDt8CPv2B2NCdQFZp
+
+  disable_root: false
+  chpasswd:
+   list: |
+    root:r00tme
+   expire: False
+
+  bootcmd:
+   # Block access to SSH while node is preparing
+   - cloud-init-per once sudo iptables -A INPUT -p tcp --dport 22 -j DROP
+   # Enable root access
+   - sed -i -e '/^PermitRootLogin/s/^.*$/PermitRootLogin yes/' /etc/ssh/sshd_config
+   - service sshd restart
+  output:
+    all: '| tee -a /var/log/cloud-init-output.log /dev/tty0'
+
+  runcmd:
+   # Configure dhclient
+   - sudo echo "nameserver {gateway}" >> /etc/resolvconf/resolv.conf.d/base
+   - sudo resolvconf -u
+
+   # Prepare network connection
+   - sudo ifup ens3
+   #- sudo route add default gw {gateway} {interface_name}
+   - sudo ifup ens4
+
+   # Create swap
+   - fallocate -l 4G /swapfile
+   - chmod 600 /swapfile
+   - mkswap /swapfile
+   - swapon /swapfile
+   - echo "/swapfile   none    swap    defaults    0   0" >> /etc/fstab
+
+   ############## TCP Cloud cfg01 node ##################
+   #- sleep 120
+   - echo "Preparing base OS"
+
+   - echo "172.18.248.114    jenkins.mcp.mirantis.net  gerrit.mcp.mirantis.net" >> /etc/hosts;
+   - echo "185.135.196.10    apt-mk.mirantis.com" >> /etc/hosts;
+   - echo "nameserver 172.18.208.44 >> /etc/resolv.conf;
+   - echo "nameserver 8.8.8.8 >> /etc/resolv.conf;
+   - which wget >/dev/null || (apt-get update; apt-get install -y wget);
+   - echo "deb [arch=amd64] http://apt-mk.mirantis.com/xenial {{ REPOSITORY_SUITE }} salt extra" > /etc/apt/sources.list.d/mcp_salt.list;
+   - wget -O - http://apt-mk.mirantis.com/public.gpg | apt-key add -;
+   - echo "deb http://repo.saltstack.com/apt/ubuntu/16.04/amd64/2016.3 xenial main" > /etc/apt/sources.list.d/saltstack.list;
+   - wget -O - https://repo.saltstack.com/apt/ubuntu/16.04/amd64/2016.3/SALTSTACK-GPG-KEY.pub | apt-key add -;
+
+   - apt-get clean
+   - apt-get update
+
+   # Install common packages
+   - eatmydata apt-get install -y python-pip git curl tmux byobu iputils-ping traceroute htop tree
+
+   ########################################################
+   # Node is ready, allow SSH access
+   - echo "Allow SSH access ..."
+   - sudo iptables -D INPUT -p tcp --dport 22 -j DROP
+   ########################################################
+
+  write_files:
+   - path: /etc/network/interfaces
+     content: |
+          auto ens3
+          iface ens3 inet dhcp
+          auto ens4
+          iface ens4 inet dhcp
+
+   - path: /root/.ssh/id_rsa
+     owner: root:root
+     permissions: '0600'
+     content: |
+         -----BEGIN RSA PRIVATE KEY-----
+         MIIEogIBAAKCAQEAqdHr4zmivHPEimCuK9vtATe4PvGEr0Np/JxYDlEQsr5Cajh4
+         tajxmZrjdAnJWFXVbmYl21sN1cUW0ltxB+9+lc4GNVNCZqE4kmpsyx2lrF7xCFvF
+         Qou26JYud/UCT9IpCYgWjQIGSC8gq1TzfgOpn6rWnLNSl3WdM5TKtQT7RXIkdSUw
+         kXFbObz9lsM+ULWNozCId2osJHj4zE0D3H5odU5DpcWLuSG0MmdxtWoQNJjSiPWt
+         HbRdvNmr/xeqcAfzdUdZxGf/VbXDdiNZn9TVv7UxxBHE812KNUf/Cvb5agDfEL7x
+         i2bWXbhr4jVTaDVr6MWl8Q7fAj79gdjQnUBWaQIDAQABAoIBAFU3kU6yIna9BViH
+         UX+S2ijtRBjZ68JjavEnp4xvo5h+nydcdT57q9lv/0nAi3g3gmXm/oJH+/ZU87HV
+         zy+zP+t+umDSChUkPBZFL5jxpKyN7BhMrP1KzRuEGYd6vJE/nfY5g095P5vDgnpX
+         o+SNg/YqrY1u8zgr/hnfRaV2/XyIDEEcQXTHseWTnnMQnULFU88xL8yq8ACT5GhK
+         7A9m5ukfcU6d/fs/psz5Yqw5IQsWbv1yJ3/FKufPHlo2Nzh3/3eDAZUXvaBgf1so
+         FWFpHtkry3OXOGaZ98HgF9hL0twS0pzMvuypdGUQAt6nyB1N5re4LK/MAOddqwEc
+         1+NQzfECgYEA2ryEf0GLJdtiYs3F4HbwTwJVIXdyWv7kjYGeMkutzzAjXl6wx8aq
+         kfqLJ7x7UkR5unZ1ajEbKBciAlSuFA+Gikn6a4Lv8h87aSnHpPd/2VSitRlI/gW7
+         w4U4CL3Br1JyonU5WA7VYfTow7KnHBhdwm27RMA9uosyIpveQRpqSG0CgYEAxsAS
+         wCQKrhuPq2YtGtFR7K4BL+N+0E1Vq6h49u1ukcgUe0GHVD3VzBypNCv7rWEVHzAg
+         biCVi7PCjzZYW4fYZmzVD4JbFLVGOUu7aJwLaE4wDe72DNr6YZhcS+Ta98BP+x0q
+         Wt34JNPDabRPfhXfhiCqnWjjod+4Zqx4VJVNgG0CgYB5EXL8xJhyAbW5Hk/x56Mm
+         +BGKjoR7HS3/rMiU6hJv5SMObrbGPI3YcqZm/gn8BO6jaEGg30E6tWMbiyc270j2
+         be/vZe/NQcAuevOHuX3IGvJb7nzaLO46UBgtrmnv0mCkzuFIfh1ZNKdI+i9Ie6wZ
+         m4bVjNod0EGVqlQgELDXGQKBgB+NNmzSS++/6FrpaZesSzkrlnynvOYMoOETacCp
+         iLgT70xx5q308w/oLORfZyDrHJNK7JsPCS6YZvadRgGh2zTHajuAEj2DWZaW8zV0
+         MEtqvi44FU+NI9qCeYSC3FAgc5IF20d5nX8bLxaEzWnSxx1f6jX7BMgZ4AhMsP2c
+         hiUxAoGAFaxn+t9blIjqUiuh0smSYFhLBVPZveYHQDmQYERjktptBd3X95fGnSKh
+         iDe2iPGyud2+Yu4X/VjHLh/MRru+ZXvPXw1XwEqX93q8a1n283ul0Rl9+KKKOVHR
+         eecTjI/BfXBf33mPRKny3xuHw6uwta2T3OXky9IhqYS1kkHiZWA=
+         -----END RSA PRIVATE KEY-----
+
+   - path: /root/.ssh/config
+     owner: root:root
+     permissions: '0600'
+     content: |
+          Host *
+            ServerAliveInterval 300
+            ServerAliveCountMax 10
+            StrictHostKeyChecking no
+            UserKnownHostsFile /dev/null
diff --git a/tcp_tests/templates/virtual-mcp10-contrail/underlay--user-data1404.yaml b/tcp_tests/templates/virtual-mcp10-contrail/underlay--user-data1404.yaml
new file mode 100644
index 0000000..d139bb1
--- /dev/null
+++ b/tcp_tests/templates/virtual-mcp10-contrail/underlay--user-data1404.yaml
@@ -0,0 +1,99 @@
+| # All the data below will be stored as a string object
+  #cloud-config, see http://cloudinit.readthedocs.io/en/latest/topics/examples.html
+
+  ssh_pwauth: True
+  users:
+   - name: root
+     sudo: ALL=(ALL) NOPASSWD:ALL
+     shell: /bin/bash
+     ssh_authorized_keys:
+      - ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQDGwjUlYn9UsmWmAGSuEA2sICad7WqxgsJR0HKcMbbxi0tn96h4Cq2iGYmzlJ48egLm5R5pxyWnFvL4b/2zb+kKTPCMwRc9nv7xEGosEFNQEoSDd+gYu2CO0dgS2bX/7m2DXmzvhqPjxWQUXXsb0OYAS1r9Es65FE8y4rLaegz8V35xfH45bTCA0W8VSKh264XtGz12hacqsttE/UvyjJTZe+/XV+xJy3WAWxe8J/MuW1VqbqNewTmpTE/LJU8i6pG4msU6+wH99UvsGAOKQOduynUHKWG3VZg5YCjpbbV/t/pfW/vHB3b3jiifQmNhulyiG/CNnSQ5BahtV/7qPsYt vagrant@cfg01
+
+  disable_root: false
+  chpasswd:
+   list: |
+    root:r00tme
+   expire: False
+
+  bootcmd:
+   # Block access to SSH while node is preparing
+   - cloud-init-per once sudo iptables -A INPUT -p tcp --dport 22 -j DROP
+   # Enable root access
+   - sed -i -e '/^PermitRootLogin/s/^.*$/PermitRootLogin yes/' /etc/ssh/sshd_config
+   - service sshd restart
+  output:
+    all: '| tee -a /var/log/cloud-init-output.log /dev/tty0'
+
+  runcmd:
+   # Configure dhclient
+   - sudo echo "nameserver {gateway}" >> /etc/resolvconf/resolv.conf.d/base
+   - sudo resolvconf -u
+
+   # Prepare network connection
+   - sudo ifup eth0
+   #- sudo route add default gw {gateway} {interface_name}
+   - sudo ifup eth1
+
+   # Create swap
+   - fallocate -l 4G /swapfile
+   - chmod 600 /swapfile
+   - mkswap /swapfile
+   - swapon /swapfile
+   - echo "/swapfile   none    swap    defaults    0   0" >> /etc/fstab
+
+   ############## TCP Cloud cfg01 node ##################
+   #- sleep 120
+   - echo "Preparing base OS"
+   - which wget >/dev/null || (apt-get update; apt-get install -y wget)
+   - echo "deb [arch=amd64] http://apt.tcpcloud.eu/nightly/ trusty main security extra tcp tcp-salt" > /etc/apt/sources.list
+   - wget -O - http://apt.tcpcloud.eu/public.gpg | apt-key add -
+   # saltstack repo is for minions that have the same version in the xenial and trusty (2016.3.3)
+   #- echo "deb http://repo.saltstack.com/apt/ubuntu/14.04/amd64/latest trusty main" > /etc/apt/sources.list.d/saltstack.list
+   #- wget -O - https://repo.saltstack.com/apt/ubuntu/14.04/amd64/latest/SALTSTACK-GPG-KEY.pub | apt-key add -
+   - echo "deb http://repo.saltstack.com/apt/ubuntu/14.04/amd64/2016.3 trusty main" > /etc/apt/sources.list.d/saltstack.list
+   - wget -O - https://repo.saltstack.com/apt/ubuntu/14.04/amd64/2016.3/SALTSTACK-GPG-KEY.pub | apt-key add -
+
+   - apt-get clean
+   - apt-get update
+   - apt-get -y upgrade
+
+   # Install common packages
+   - apt-get install -y python-pip git
+   - apt-get install -y curl tmux byobu iputils-ping traceroute htop tree
+
+   - apt-get install -y salt-minion
+
+   # To be configured from inventory/fuel-devops by operator or autotests
+   - 'echo "id: {hostname}" >> /etc/salt/minion'
+   - 'echo "master: 192.168.10.100" >> /etc/salt/minion'
+
+   - echo "Restarting minion service with workarounds..."
+   - rm -f /etc/salt/pki/minion/minion_master.pub
+   - service salt-minion restart
+   - sleep 5
+   - rm -f /etc/salt/pki/minion/minion_master.pub
+   - service salt-minion restart
+
+   #- echo "Showing node metadata..."
+   #- salt-call pillar.data
+
+   #- echo "Running complete state ..."
+   #- salt-call state.sls linux,openssh,salt
+
+   # Workaround for bug https://mirantis.jira.com/browse/PROD-8214
+   - apt-get -y install --install-recommends linux-generic-lts-xenial
+   - reboot
+
+   ########################################################
+   # Node is ready, allow SSH access
+   ##- echo "Allow SSH access ..."
+   ##- sudo iptables -D INPUT -p tcp --dport 22 -j DROP
+   ########################################################
+
+  write_files:
+   - path: /etc/network/interfaces
+     content: |
+          auto eth0
+          iface eth0 inet dhcp
+          auto eth1
+          iface eth1 inet dhcp
diff --git a/tcp_tests/templates/virtual-mcp10-contrail/underlay--user-data1604.yaml b/tcp_tests/templates/virtual-mcp10-contrail/underlay--user-data1604.yaml
new file mode 100644
index 0000000..2c3cb6c
--- /dev/null
+++ b/tcp_tests/templates/virtual-mcp10-contrail/underlay--user-data1604.yaml
@@ -0,0 +1,78 @@
+| # All the data below will be stored as a string object
+  #cloud-config, see http://cloudinit.readthedocs.io/en/latest/topics/examples.html
+
+  ssh_pwauth: True
+  users:
+   - name: root
+     sudo: ALL=(ALL) NOPASSWD:ALL
+     shell: /bin/bash
+     ssh_authorized_keys:
+      - ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQDGwjUlYn9UsmWmAGSuEA2sICad7WqxgsJR0HKcMbbxi0tn96h4Cq2iGYmzlJ48egLm5R5pxyWnFvL4b/2zb+kKTPCMwRc9nv7xEGosEFNQEoSDd+gYu2CO0dgS2bX/7m2DXmzvhqPjxWQUXXsb0OYAS1r9Es65FE8y4rLaegz8V35xfH45bTCA0W8VSKh264XtGz12hacqsttE/UvyjJTZe+/XV+xJy3WAWxe8J/MuW1VqbqNewTmpTE/LJU8i6pG4msU6+wH99UvsGAOKQOduynUHKWG3VZg5YCjpbbV/t/pfW/vHB3b3jiifQmNhulyiG/CNnSQ5BahtV/7qPsYt vagrant@cfg01
+
+  disable_root: false
+  chpasswd:
+   list: |
+    root:r00tme
+   expire: False
+
+  bootcmd:
+   # Block access to SSH while node is preparing
+   - cloud-init-per once sudo iptables -A INPUT -p tcp --dport 22 -j DROP
+   # Enable root access
+   - sed -i -e '/^PermitRootLogin/s/^.*$/PermitRootLogin yes/' /etc/ssh/sshd_config
+   - service sshd restart
+  output:
+    all: '| tee -a /var/log/cloud-init-output.log /dev/tty0'
+
+  runcmd:
+   - export TERM=linux
+   - export LANG=C
+   # Configure dhclient
+   - sudo echo "nameserver {gateway}" >> /etc/resolvconf/resolv.conf.d/base
+   - sudo resolvconf -u
+
+   # Prepare network connection
+   - sudo ifup ens3
+   #- sudo route add default gw {gateway} {interface_name}
+   - sudo ifup ens4
+
+   # Create swap
+   - fallocate -l 4G /swapfile
+   - chmod 600 /swapfile
+   - mkswap /swapfile
+   - swapon /swapfile
+   - echo "/swapfile   none    swap    defaults   0   0" >> /etc/fstab
+
+
+   ############## TCP Cloud cfg01 node ##################
+   #- sleep 120
+   - echo "Preparing base OS"
+   - which wget >/dev/null || (apt-get update; apt-get install -y wget)
+   - echo "deb [arch=amd64] http://apt.tcpcloud.eu/nightly/ xenial main security extra tcp tcp-salt" > /etc/apt/sources.list
+   - wget -O - http://apt.tcpcloud.eu/public.gpg | apt-key add -
+   # saltstack repo is for minions that have the same version in the xenial and trusty (2016.3.3)
+   #- echo "deb http://repo.saltstack.com/apt/ubuntu/16.04/amd64/latest xenial main" > /etc/apt/sources.list.d/saltstack.list
+   #- wget -O - https://repo.saltstack.com/apt/ubuntu/16.04/amd64/latest/SALTSTACK-GPG-KEY.pub | apt-key add -
+   - echo "deb http://repo.saltstack.com/apt/ubuntu/16.04/amd64/2016.3 xenial main" > /etc/apt/sources.list.d/saltstack.list
+   - wget -O - https://repo.saltstack.com/apt/ubuntu/16.04/amd64/2016.3/SALTSTACK-GPG-KEY.pub | apt-key add -
+
+   - apt-get clean
+   - eatmydata apt-get update && apt-get -y upgrade
+
+   # Install common packages
+   - eatmydata apt-get install -y python-pip git curl tmux byobu iputils-ping traceroute htop tree mc
+
+   ########################################################
+   # Node is ready, allow SSH access
+   - echo "Allow SSH access ..."
+   - sudo iptables -D INPUT -p tcp --dport 22 -j DROP
+   ########################################################
+
+  write_files:
+   - path: /etc/network/interfaces
+     content: |
+          auto ens3
+          iface ens3 inet dhcp
+          auto ens4
+          iface ens4 inet dhcp
+
diff --git a/tcp_tests/templates/virtual-mcp10-contrail/underlay.yaml b/tcp_tests/templates/virtual-mcp10-contrail/underlay.yaml
new file mode 100644
index 0000000..5914fa8
--- /dev/null
+++ b/tcp_tests/templates/virtual-mcp10-contrail/underlay.yaml
@@ -0,0 +1,428 @@
+# Set the repository suite, one of the: 'nightly', 'testing', 'stable', or any other required
+{% set REPOSITORY_SUITE = os_env('REPOSITORY_SUITE', 'stable') %}
+
+{% import 'virtual-mcp10-contrail/underlay--meta-data.yaml' as CLOUDINIT_META_DATA %}
+{% import 'virtual-mcp10-contrail/underlay--user-data-cfg01.yaml' as CLOUDINIT_USER_DATA_CFG01 %}
+{% import 'virtual-mcp10-contrail/underlay--user-data1604.yaml' as CLOUDINIT_USER_DATA_1604 %}
+{% import 'virtual-mcp10-contrail/underlay--user-data1404.yaml' as CLOUDINIT_USER_DATA_1404 %}
+
+---
+aliases:
+ - &interface_model {{ os_env('INTERFACE_MODEL', 'virtio') }}
+ - &cloudinit_meta_data {{ CLOUDINIT_META_DATA }}
+ - &cloudinit_user_data_cfg01 {{ CLOUDINIT_USER_DATA_CFG01 }}
+ - &cloudinit_user_data_1604 {{ CLOUDINIT_USER_DATA_1604 }}
+ - &cloudinit_user_data_1404 {{ CLOUDINIT_USER_DATA_1404 }}
+
+{% set DOMAIN_NAME = os_env('LAB_CONFIG_NAME', 'virtual-mcp10-contrail') + '.local' %}
+{% set HOSTNAME_CFG01 = os_env('HOSTNAME_CFG01', 'cfg01.' + DOMAIN_NAME) %}
+{% set HOSTNAME_CTL01 = os_env('HOSTNAME_CTL01', 'ctl01.' + DOMAIN_NAME) %}
+{% set HOSTNAME_CTL02 = os_env('HOSTNAME_CTL02', 'ctl02.' + DOMAIN_NAME) %}
+{% set HOSTNAME_CTL03 = os_env('HOSTNAME_CTL03', 'ctl03.' + DOMAIN_NAME) %}
+{% set HOSTNAME_CMP01 = os_env('HOSTNAME_CMP01', 'cmp01.' + DOMAIN_NAME) %}
+{% set HOSTNAME_CMP02 = os_env('HOSTNAME_CMP02', 'cmp02.' + DOMAIN_NAME) %}
+{% set HOSTNAME_VSRX01 = os_env('HOSTNAME_VSRX01', 'vsrx01.' + DOMAIN_NAME) %}
+{% set HOSTNAME_PRX01 = os_env('HOSTNAME_PRX01', 'prx01.' + DOMAIN_NAME) %}
+
+template:
+  devops_settings:
+    env_name: {{ os_env('ENV_NAME', 'virtual-contrail_' + REPOSITORY_SUITE + "_" + os_env('BUILD_NUMBER', '')) }}
+
+    address_pools:
+      private-pool01:
+        net: {{ os_env('PRIVATE_ADDRESS_POOL01', '10.60.0.0/16:24') }}
+        params:
+          ip_reserved:
+            gateway: +1
+            l2_network_device: +1
+            default_{{ HOSTNAME_CFG01 }}: +100
+            default_{{ HOSTNAME_CTL01 }}: +101
+            default_{{ HOSTNAME_CTL02 }}: +102
+            default_{{ HOSTNAME_CTL03 }}: +103
+            default_{{ HOSTNAME_CMP01 }}: +105
+            default_{{ HOSTNAME_CMP02 }}: +106
+            default_{{ HOSTNAME_VSRX01 }}: +110
+            default_{{ HOSTNAME_PRX01 }}: +121
+          ip_ranges:
+            dhcp: [+90, -10]
+
+      admin-pool01:
+        net: {{ os_env('ADMIN_ADDRESS_POOL01', '10.70.0.0/16:24') }}
+        params:
+          ip_reserved:
+            gateway: +1
+            l2_network_device: +1
+            default_{{ HOSTNAME_CFG01 }}: +100
+            default_{{ HOSTNAME_CTL01 }}: +101
+            default_{{ HOSTNAME_CTL02 }}: +102
+            default_{{ HOSTNAME_CTL03 }}: +103
+            default_{{ HOSTNAME_CMP01 }}: +105
+            default_{{ HOSTNAME_CMP02 }}: +106
+            default_{{ HOSTNAME_VSRX01 }}: +110
+            default_{{ HOSTNAME_PRX01 }}: +121
+          ip_ranges:
+            dhcp: [+90, -10]
+
+      tenant-pool01:
+        net: {{ os_env('TENANT_ADDRESS_POOL01', '10.80.0.0/16:24') }}
+        params:
+          ip_reserved:
+            gateway: +1
+            l2_network_device: +1
+            default_{{ HOSTNAME_CFG01 }}: +100
+            default_{{ HOSTNAME_CTL01 }}: +101
+            default_{{ HOSTNAME_CTL02 }}: +102
+            default_{{ HOSTNAME_CTL03 }}: +103
+            default_{{ HOSTNAME_CMP01 }}: +105
+            default_{{ HOSTNAME_CMP02 }}: +106
+            default_{{ HOSTNAME_VSRX01 }}: +110
+            default_{{ HOSTNAME_PRX01 }}: +121
+          ip_ranges:
+            dhcp: [+10, -10]
+
+      external-pool01:
+        net: {{ os_env('EXTERNAL_ADDRESS_POOL01', '10.90.0.0/16:24') }}
+        params:
+          ip_reserved:
+            gateway: +1
+            l2_network_device: +1
+            default_{{ HOSTNAME_CFG01 }}: +100
+            default_{{ HOSTNAME_CTL01 }}: +101
+            default_{{ HOSTNAME_CTL02 }}: +102
+            default_{{ HOSTNAME_CTL03 }}: +103
+            default_{{ HOSTNAME_CMP01 }}: +105
+            default_{{ HOSTNAME_CMP02 }}: +106
+            default_{{ HOSTNAME_VSRX01 }}: +110
+            default_{{ HOSTNAME_PRX01 }}: +121
+          ip_ranges:
+            dhcp: [+10, -10]
+
+
+    groups:
+      - name: default
+        driver:
+          name: devops.driver.libvirt
+          params:
+            connection_string: !os_env CONNECTION_STRING, qemu:///system
+            storage_pool_name: !os_env STORAGE_POOL_NAME, default
+            stp: False
+            hpet: False
+            enable_acpi: true
+            use_host_cpu: !os_env DRIVER_USE_HOST_CPU, true
+
+        network_pools:
+          admin: admin-pool01
+          private: private-pool01
+          tenant: tenant-pool01
+          external: external-pool01
+
+        l2_network_devices:
+          private:
+            address_pool: private-pool01
+            dhcp: true
+
+          admin:
+            address_pool: admin-pool01
+            dhcp: true
+            forward:
+              mode: nat
+
+          tenant:
+            address_pool: tenant-pool01
+            dhcp: true
+
+          external:
+            address_pool: external-pool01
+            dhcp: true
+            forward:
+              mode: nat
+
+
+        group_volumes:
+         - name: cloudimage1404    # This name is used for 'backing_store' option for node volumes.
+           source_image: !os_env IMAGE_PATH1404  # https://cloud-images.ubuntu.com/trusty/current/trusty-server-cloudimg-amd64-disk1.img or
+                                             # http://apt.tcpcloud.eu/images/ubuntu-14-04-x64-201608231134.qcow2
+           format: qcow2
+         - name: cloudimage1604    # This name is used for 'backing_store' option for node volumes.
+           source_image: !os_env IMAGE_PATH1604  # https://cloud-images.ubuntu.com/xenial/current/xenial-server-cloudimg-amd64-disk1.img or
+                                             # http://apt.tcpcloud.eu/images/ubuntu-16-04-x64-201608231004.qcow2
+           format: qcow2
+
+         - name: vsrx_image    # This name is used for 'backing_store' option for node volumes.
+           source_image: !os_env VSRX_IMAGE  # https://cloud-images.ubuntu.com/xenial/current/xenial-server-cloudimg-amd64-disk1.img or
+                                             # http://apt.tcpcloud.eu/images/ubuntu-16-04-x64-201608231004.qcow2
+           format: qcow2
+
+        nodes:
+          - name: {{ HOSTNAME_CFG01 }}
+            role: salt_master
+            params:
+              vcpu: !os_env SLAVE_NODE_CPU, 4
+              memory: !os_env SLAVE_NODE_MEMORY, 4096
+              boot:
+                - hd
+              cloud_init_volume_name: iso
+              cloud_init_iface_up: ens3
+              volumes:
+                - name: system
+                  capacity: !os_env NODE_VOLUME_SIZE, 150
+                  backing_store: cloudimage1604
+                  format: qcow2
+                - name: iso  # Volume with name 'iso' will be used
+                             # for store image with cloud-init metadata.
+                  capacity: 1
+                  format: raw
+                  device: cdrom
+                  bus: ide
+                  cloudinit_meta_data: *cloudinit_meta_data
+                  cloudinit_user_data: *cloudinit_user_data_cfg01
+
+              interfaces:
+                - label: ens3
+                  l2_network_device: admin
+                  interface_model: *interface_model
+                - label: ens4
+                  l2_network_device: private
+                  interface_model: *interface_model
+              network_config:
+                ens3:
+                  networks:
+                    - admin
+                ens4:
+                  networks:
+                    - private
+
+          - name: {{ HOSTNAME_CTL01 }}
+            role: salt_minion
+            params:
+              vcpu: !os_env SLAVE_NODE_CPU, 4
+              memory: !os_env SLAVE_NODE_MEMORY, 8192
+              boot:
+                - hd
+              cloud_init_volume_name: iso
+              cloud_init_iface_up: eth0
+              volumes:
+                - name: system
+                  capacity: !os_env NODE_VOLUME_SIZE, 150
+                  backing_store: cloudimage1404
+                  format: qcow2
+                - name: cinder
+                  capacity: 50
+                  format: qcow2
+                - name: iso  # Volume with name 'iso' will be used
+                             # for store image with cloud-init metadata.
+                  capacity: 1
+                  format: raw
+                  device: cdrom
+                  bus: ide
+                  cloudinit_meta_data: *cloudinit_meta_data
+                  cloudinit_user_data: *cloudinit_user_data_1404
+
+              interfaces: &interfaces
+                - label: eth0
+                  l2_network_device: admin
+                  interface_model: *interface_model
+                - label: eth1
+                  l2_network_device: private
+                  interface_model: *interface_model
+              network_config: &network_config
+                eth0:
+                  networks:
+                    - admin
+                eth1:
+                  networks:
+                    - private
+
+          - name: {{ HOSTNAME_CTL02 }}
+            role: salt_minion
+            params:
+              vcpu: !os_env SLAVE_NODE_CPU, 4
+              memory: !os_env SLAVE_NODE_MEMORY, 8192
+              boot:
+                - hd
+              cloud_init_volume_name: iso
+              cloud_init_iface_up: eth0
+              volumes:
+                - name: system
+                  capacity: !os_env NODE_VOLUME_SIZE, 150
+                  backing_store: cloudimage1404
+                  format: qcow2
+                - name: cinder
+                  capacity: 50
+                  format: qcow2
+                - name: iso  # Volume with name 'iso' will be used
+                             # for store image with cloud-init metadata.
+                  capacity: 1
+                  format: raw
+                  device: cdrom
+                  bus: ide
+                  cloudinit_meta_data: *cloudinit_meta_data
+                  cloudinit_user_data: *cloudinit_user_data_1404
+
+              interfaces: *interfaces
+              network_config: *network_config
+
+          - name: {{ HOSTNAME_CTL03 }}
+            role: salt_minion
+            params:
+              vcpu: !os_env SLAVE_NODE_CPU, 4
+              memory: !os_env SLAVE_NODE_MEMORY, 8192
+              boot:
+                - hd
+              cloud_init_volume_name: iso
+              cloud_init_iface_up: eth0
+              volumes:
+                - name: system
+                  capacity: !os_env NODE_VOLUME_SIZE, 150
+                  backing_store: cloudimage1404
+                  format: qcow2
+                - name: cinder
+                  capacity: 50
+                  format: qcow2
+                - name: iso  # Volume with name 'iso' will be used
+                             # for store image with cloud-init metadata.
+                  capacity: 1
+                  format: raw
+                  device: cdrom
+                  bus: ide
+                  cloudinit_meta_data: *cloudinit_meta_data
+                  cloudinit_user_data: *cloudinit_user_data_1404
+
+              interfaces: *interfaces
+              network_config: *network_config
+
+          - name: {{ HOSTNAME_PRX01 }}
+            role: salt_minion
+            params:
+              vcpu: !os_env SLAVE_NODE_CPU, 4
+              memory: !os_env SLAVE_NODE_MEMORY, 8192
+              boot:
+                - hd
+              cloud_init_volume_name: iso
+              cloud_init_iface_up: eth0
+              volumes:
+                - name: system
+                  capacity: !os_env NODE_VOLUME_SIZE, 150
+                  backing_store: cloudimage1404
+                  format: qcow2
+                - name: cinder
+                  capacity: 50
+                  format: qcow2
+                - name: iso  # Volume with name 'iso' will be used
+                             # for store image with cloud-init metadata.
+                  capacity: 1
+                  format: raw
+                  device: cdrom
+                  bus: ide
+                  cloudinit_meta_data: *cloudinit_meta_data
+                  cloudinit_user_data: *cloudinit_user_data_1404
+
+              interfaces: *interfaces
+              network_config: *network_config
+
+
+          - name: {{ HOSTNAME_CMP01 }}
+            role: salt_minion
+            params:
+              vcpu: !os_env SLAVE_NODE_CPU, 4
+              memory: !os_env SLAVE_NODE_MEMORY, 4096
+              boot:
+                - hd
+              cloud_init_volume_name: iso
+              cloud_init_iface_up: ens3
+              volumes:
+                - name: system
+                  capacity: !os_env NODE_VOLUME_SIZE, 150
+                  backing_store: cloudimage1604
+                  format: qcow2
+                - name: iso  # Volume with name 'iso' will be used
+                             # for store image with cloud-init metadata.
+                  capacity: 1
+                  format: raw
+                  device: cdrom
+                  bus: ide
+                  cloudinit_meta_data: *cloudinit_meta_data
+                  cloudinit_user_data: *cloudinit_user_data_1604
+
+
+              interfaces: &all_interfaces
+                - label: ens3
+                  l2_network_device: admin
+                  interface_model: *interface_model
+                - label: ens4
+                  l2_network_device: private
+                  interface_model: *interface_model
+                - label: ens5
+                  l2_network_device: tenant
+                  interface_model: *interface_model
+                - label: ens6
+                  l2_network_device: external
+                  interface_model: *interface_model
+              network_config: &all_network_config
+                ens3:
+                  networks:
+                    - admin
+                ens4:
+                  networks:
+                    - private
+                ens5:
+                  networks:
+                    - tenant
+                ens6:
+                  networks:
+                    - external
+
+          - name: {{ HOSTNAME_CMP02 }}
+            role: salt_minion
+            params:
+              vcpu: !os_env SLAVE_NODE_CPU, 4
+              memory: !os_env SLAVE_NODE_MEMORY, 4096
+              boot:
+                - hd
+              cloud_init_volume_name: iso
+              cloud_init_iface_up: ens3
+              volumes:
+                - name: system
+                  capacity: !os_env NODE_VOLUME_SIZE, 150
+                  backing_store: cloudimage1604
+                  format: qcow2
+                - name: iso  # Volume with name 'iso' will be used
+                             # for store image with cloud-init metadata.
+                  capacity: 1
+                  format: raw
+                  device: cdrom
+                  bus: ide
+                  cloudinit_meta_data: *cloudinit_meta_data
+                  cloudinit_user_data: *cloudinit_user_data_1604
+
+              interfaces: *all_interfaces
+              network_config: *all_network_config
+
+          - name: {{ HOSTNAME_VSRX01 }}
+            role: vsrx_gtw
+            params:
+              vcpu: !os_env SLAVE_NODE_CPU, 1
+              memory: !os_env SLAVE_NODE_MEMORY, 2048
+              boot:
+                - hd
+              volumes:
+                - name: system
+                  capacity: !os_env NODE_VOLUME_SIZE, 150
+                  backing_store: vsrx_image
+                  format: qcow2
+
+              interfaces:
+                - label: ens5
+                  l2_network_device: tenant
+                  interface_model: *interface_model
+                - label: ens6
+                  l2_network_device: external
+                  interface_model: *interface_model
+              network_config:
+                ens5:
+                  networks:
+                    - tenant
+                ens6:
+                  networks:
+                    - external
+