# Contributing to Gophercloud

- [Getting started](#getting-started)
- [Tests](#tests)
- [Style guide](#basic-style-guide)
- [3 ways to get involved](#5-ways-to-get-involved)

## Setting up your git workspace

As a contributor you will need to setup your workspace in a slightly different
way than just downloading it. Here are the basic installation instructions:

1. Configure your `$GOPATH` and run `go get` as described in the main
[README](/README.md#how-to-install) but add `-tags "fixtures acceptance"` to
get dependencies for unit and acceptance tests.

   ```bash
   go get -tags "fixtures acceptance" gerrit.mcp.mirantis.net/debian/gophercloud.git
   ```

2. Move into the directory that houses your local repository:

   ```bash
   cd ${GOPATH}/src/gerrit.mcp.mirantis.net/debian/gophercloud.git
   ```

3. Fork the `gophercloud/gophercloud` repository and update your remote refs. You
will need to rename the `origin` remote branch to `upstream`, and add your
fork as `origin` instead:

   ```bash
   git remote rename origin upstream
   git remote add origin git@github.com:<my_username>/gophercloud.git
   ```

4. Checkout the latest development branch:

   ```bash
   git checkout master
   ```

5. If you're working on something (discussed more in detail below), you will
need to checkout a new feature branch:

   ```bash
   git checkout -b my-new-feature
   ```

Another thing to bear in mind is that you will need to add a few extra
environment variables for acceptance tests - this is documented in our
[acceptance tests readme](/acceptance).

## Tests

When working on a new or existing feature, testing will be the backbone of your
work since it helps uncover and prevent regressions in the codebase. There are
two types of test we use in Gophercloud: unit tests and acceptance tests, which
are both described below.

### Unit tests

Unit tests are the fine-grained tests that establish and ensure the behavior
of individual units of functionality. We usually test on an
operation-by-operation basis (an operation typically being an API action) with
the use of mocking to set up explicit expectations. Each operation will set up
its HTTP response expectation, and then test how the system responds when fed
this controlled, pre-determined input.

To make life easier, we've introduced a bunch of test helpers to simplify the
process of testing expectations with assertions:

```go
import (
  "testing"

  "gerrit.mcp.mirantis.net/debian/gophercloud.git/testhelper"
)

func TestSomething(t *testing.T) {
  result, err := Operation()

  testhelper.AssertEquals(t, "foo", result.Bar)
  testhelper.AssertNoErr(t, err)
}

func TestSomethingElse(t *testing.T) {
  testhelper.CheckEquals(t, "expected", "actual")
}
```

`AssertEquals` and `AssertNoErr` will throw a fatal error if a value does not
match an expected value or if an error has been declared, respectively. You can
also use `CheckEquals` and `CheckNoErr` for the same purpose; the only difference
being that `t.Errorf` is raised rather than `t.Fatalf`.

Here is a truncated example of mocked HTTP responses:

```go
import (
	"testing"

	th "gerrit.mcp.mirantis.net/debian/gophercloud.git/testhelper"
	fake "gerrit.mcp.mirantis.net/debian/gophercloud.git/testhelper/client"
  "gerrit.mcp.mirantis.net/debian/gophercloud.git/openstack/networking/v2/networks"
)

func TestGet(t *testing.T) {
	// Setup the HTTP request multiplexer and server
	th.SetupHTTP()
	defer th.TeardownHTTP()

	th.Mux.HandleFunc("/networks/d32019d3-bc6e-4319-9c1d-6722fc136a22", func(w http.ResponseWriter, r *http.Request) {
		// Test we're using the correct HTTP method
		th.TestMethod(t, r, "GET")

		// Test we're setting the auth token
		th.TestHeader(t, r, "X-Auth-Token", fake.TokenID)

		// Set the appropriate headers for our mocked response
		w.Header().Add("Content-Type", "application/json")
		w.WriteHeader(http.StatusOK)

		// Set the HTTP body
		fmt.Fprintf(w, `
{
    "network": {
        "status": "ACTIVE",
        "name": "private-network",
        "admin_state_up": true,
        "tenant_id": "4fd44f30292945e481c7b8a0c8908869",
        "shared": true,
        "id": "d32019d3-bc6e-4319-9c1d-6722fc136a22"
    }
}
			`)
	})

	// Call our API operation
	network, err := networks.Get(fake.ServiceClient(), "d32019d3-bc6e-4319-9c1d-6722fc136a22").Extract()

	// Assert no errors and equality
	th.AssertNoErr(t, err)
	th.AssertEquals(t, n.Status, "ACTIVE")
}
```

### Acceptance tests

As we've already mentioned, unit tests have a very narrow and confined focus -
they test small units of behavior. Acceptance tests on the other hand have a
far larger scope: they are fully functional tests that test the entire API of a
service in one fell swoop. They don't care about unit isolation or mocking
expectations, they instead do a full run-through and consequently test how the
entire system _integrates_ together. When an API satisfies expectations, it
proves by default that the requirements for a contract have been met.

Please be aware that acceptance tests will hit a live API - and may incur
service charges from your provider. Although most tests handle their own
teardown procedures, it is always worth manually checking that resources are
deleted after the test suite finishes.

### Running tests

To run all tests:

```bash
go test -tags fixtures ./...
```

To run all tests with verbose output:

```bash
go test -v -tags fixtures ./...
```

To run tests that match certain [build tags]():

```bash
go test -tags "fixtures foo bar" ./...
```

To run tests for a particular sub-package:

```bash
cd ./path/to/package && go test -tags fixtures .
```

## Style guide

See [here](/STYLEGUIDE.md)

## 3 ways to get involved

There are five main ways you can get involved in our open-source project, and
each is described briefly below. Once you've made up your mind and decided on
your fix, you will need to follow the same basic steps that all submissions are
required to adhere to:

1. [fork](https://help.github.com/articles/fork-a-repo/) the `gophercloud/gophercloud` repository
2. checkout a [new branch](https://github.com/Kunena/Kunena-Forum/wiki/Create-a-new-branch-with-git-and-manage-branches)
3. submit your branch as a [pull request](https://help.github.com/articles/creating-a-pull-request/)

### 1. Fixing bugs

If you want to start fixing open bugs, we'd really appreciate that! Bug fixing
is central to any project. The best way to get started is by heading to our
[bug tracker](https://gerrit.mcp.mirantis.net/debian/gophercloud.git/issues) and finding open
bugs that you think nobody is working on. It might be useful to comment on the
thread to see the current state of the issue and if anybody has made any
breakthroughs on it so far.

### 2. Improving documentation
The best source of documentation is on [godoc.org](http://godoc.org). It is
automatically generated from the source code.

If you feel that a certain section could be improved - whether it's to clarify
ambiguity, correct a technical mistake, or to fix a grammatical error - please
feel entitled to do so! We welcome doc pull requests with the same childlike
enthusiasm as any other contribution!

###3. Working on a new feature

If you've found something we've left out, definitely feel free to start work on
introducing that feature. It's always useful to open an issue or submit a pull
request early on to indicate your intent to a core contributor - this enables
quick/early feedback and can help steer you in the right direction by avoiding
known issues. It might also help you avoid losing time implementing something
that might not ever work. One tip is to prefix your Pull Request issue title
with [wip] - then people know it's a work in progress.

You must ensure that all of your work is well tested - both in terms of unit
and acceptance tests. Untested code will not be merged because it introduces
too much of a risk to end-users.

Happy hacking!